- dovecot - dovecot.org

Dovecot under Linux with mail-extension and case insesitiv
by Sascha 06 Aug '15

06 Aug '15

Hello, i use doevecot 2.2.18 current. My Problem is with email-extension and case sensitiv folders. Example: user+extenstion will be delivered to the user and subfolder extenstion so this is okay. but user+extenstion will not be delivert to the user and exiting subfolder Extenstion so that is not okay. The mail will be also delivered in the subfolder extension. The exiting Folder Extension will not used. Give's a way to tell dovecot, use the extension as a Folder, if a exiting folder with Upper/Lower Cases will be detect and use the right folder to delivery? -- Regards Sascha --- Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft. https://www.avast.com/antivirus

6 7

Dovecot/Pigeonhole Issue (UTC modtime instead of localtime)
by Christoph Gröver 06 Aug '15

06 Aug '15

Hi List, We are using the following setup: Dovecot-2.2.18 Pigeonhole-0.4.8 (for Dovecot-2.2) After the mail is finally delivered via a fileinto by the Sieve filter it gets an updated timestamp (modification time). The server has localtime setup correctly IMO (UTC +0200), but still the delivered mail is setup as being two hours old. I think I found out that the function sieve_file_storage_update_mtime() is the cause of this problem. But perhaps there has to be some kind of setup, that tells pigeonhole to use the 2 hour offset of CEST. I think to reset the mtime by utime(s) is a bit strange. It already gets the correct modtime just by storing it in the filesystem. Last version we used (0.2.5) did not have this poblem. So it must be there for some reason? Perhaps you can enlighten me. Thanks for your time. Greetings -- Sitepark Gesellschaft für Informationsmanagement mbH Rothenburg 14-16, 48143 Münster Telefon: +49 251 482655-0, Telefax: +49 251 482655-55 http://www.sitepark.com http://www.facebook.com/sitepark Geschäftsführer: Thorsten Liebold Amtsgericht Münster, HRB 5017

2 5

Dovecot sieve pigeonhole permission
by Gerhard Wiesinger 05 Aug '15

05 Aug '15

Hello, I'm running dovecot in a classical vmail.vmail setup with pigeonhole and LMTP. Permission worked well in the initial setup but currently (maybe after Fedora 22 update) I'm having the following permission issue: lmtp(root): Error: 7fPZFOL9wFXePQAABcdabc: sieve: binary open: failed to open: open(/etc/dovecot/sieve_after.svbin) failed: Permission denied (euid=9999(vmail) egid=9999(vmail) missing +r perm: /etc/dovecot/sieve_after.svbin, we're not in group 0(root), dir owned by 0:0 mode=0755) lmtp(root): Error: 7fPZFOL9wFXePQAABcdabc: sieve: binary save: failed to create temporary file: open(/etc/dovecot/sieve_after.svbin.myserver.mydomain.15838.) failed: Permission denied (euid=9999(vmail) egid=9999(vmail) missing +w perm: /etc/dovecot, dir owned by 0:0 mode=0755) lmtp(root): Error: 7fPZFOL9wFXePQAABcdcbc: sieve: The LDA Sieve plugin does not have permission to save global Sieve script binaries; global Sieve scripts like `/etc/dovecot/sieve_after.sieve' need to be pre-compiled using the sievec tool rpm -V dovecot dovecot-pigeonhole doesn't report any permission issues Versions: dovecot-2.2.18-2.fc22.x86_64 dovecot-pigeonhole-2.2.18-2.fc22.x86_64 Relevant config parts: mail_gid = vmail mail_uid = vmail plugin { sieve = ~/.dovecot.sieve sieve_after = /etc/dovecot/sieve_after.sieve sieve_dir = ~/sieve } ls -lad /etc/dovecot/ drwxr-xr-x. 3 root root 4096 Jul 30 18:13 /etc/dovecot/ ls -la /etc/dovecot/*sieve* -rwxr-x--- 1 vmail vmail 288 Aug 8 2014 /etc/dovecot/sieve_after.sieve -rw-r----- 1 root root 355 Jul 30 18:13 /etc/dovecot/sieve_after.svbin What's are the recommended permissions for the files/directories (also for root service startup of dovecot)? Did something change in permissions management? Thanx. Ciao, Gerhard -- http://www.wiesinger.com/

2 3

451 4.3.0 Temporary internal failure
by Nutsch 04 Aug '15

04 Aug '15

Hi i can send mails without problems in any direction, except when the attachments are bigger than 1 MB. I alway get this message relay=mail.example.net[private/dovecot-lmtp], delay=35155, delays=35155/0.03/0.02/0.09, dsn=4.3.0, status=deferred (host mail.example.net[private/dovecot-lmtp] said: 451 4.3.0 Temporary internal failure (in reply to end of DATA command)) Aug 3 19:34:34 46185 dovecot: lmtp(6477): Disconnect from local: Temporary internal failure (in DATA) postconf message_size_limit message_size_limit = 0 postconf mail_size_limit mailbox_size_limit = 0 i can send big attachments to an extern address but not from intern to intern. Someone said that maybe the tmp directory is the problem so i checked the size. ls -ald /tmp/; df -h /tmp/ drwxrwxrwt 4 root root 80 Aug 3 19:44 /tmp/ Filesystem Size Used Avail Use% Mounted on - 1,0M 4,0K 1020K 1% /tmp root@example:/tmp# is there a connection between lmtp and the size of the tmp directory? And why is the size 1,0M, tmp is not an own partion. Should i increase the size? And if yes, how? df -h Filesystem Size Used Avail Use% Mounted on /dev/vzfs 80G 12G 69G 15% / ??? br. noctua

2 4

Renaming shared mailbox makes it disappear from sharee
by Andy Csillag 03 Aug '15

03 Aug '15

I've run into an interesting thing. If a mailbox has been shared to a second user (I'll call it the sharee), and there are subfolders on that mailbox, and the sharee renames one of those subfolders, it disappears from view to the sharee. The only way I've been able discover to fix it is to have the sharee create a new subfolder -- then the renamed folder shows up again; in addition to the newly created folder. For example, first(a)example.org shares it's INBOX to second(a)example.org. There's a folder INBOX/thing, which second@ renames to INBOX/renamed (ACLs permitting). second@ can no longer can see INBOX/renamed (or INBOX/thing for that matter), via IMAP's LIST command. But if second@ creates a new folder INBOX/other, INBOX/renamed is now visible. This is very reproducible for me. I also tried it without the imappostlogin bit (in the dovecot -n). Anyone else run into this? No NFS is involved, this is a single machine setup. Output of dovecot -n # 2.2.18: /dovecot/etc/dovecot/dovecot.conf # Pigeonhole version 0.4.8 # OS: Linux 2.6.32-504.el6.x86_64 x86_64 CentOS release 6.6 (Final) xfs auth_master_user_separator = * auth_mechanisms = plain login dict { acl = mysql:/dovecot/etc/dovecot/dovecot-dict-sql.conf.ext } disable_plaintext_auth = no lda_mailbox_autosubscribe = yes mail_home = mdbox:/dovecot/var/homedirs/%2Mu/%2.2Mu/%u mail_location = mdbox:/dovecot/var/mailboxes/%2Mu/%2.2Mu/%u mail_plugins = acl mail_shared_explicit_inbox = yes managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate vnd.dovecot.pipe vnd.dovecot.filter vnd.dovecot.execute namespace { list = children location = mdbox:/dovecot/var/mailboxes/%%2Mu/%%2.2Mu/%%u prefix = shared/%%u/ separator = / subscriptions = no type = shared } namespace inbox { inbox = yes location = mailbox Drafts { special_use = Drafts } mailbox Junk { special_use = Junk } mailbox Sent { special_use = Sent } mailbox "Sent Messages" { special_use = Sent } mailbox Trash { special_use = Trash } prefix = } passdb { args = /dovecot/etc/dovecot/mastership-sql.conf driver = sql master = yes pass = yes } passdb { args = /dovecot/etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { acl = vfile acl_shared_dict = proxy::acl sieve_after = /dovecot/etc/dovecot/sieve/99-autofile.sieve sieve_after2 = /dovecot/etc/dovecot/sieve/98-notify-biz-address.sieve sieve_execute_bin_dir = /dovecot/etc/dovecot/sieve-execute sieve_execute_socket_dir = sieve-execute sieve_extensions = +vnd.dovecot.execute +vnd.dovecot.filter +vnd.dovecot.pipe sieve_filter_bin_dir = /dovecot/etc/dovecot/sieve-filter sieve_filter_socket_dir = sieve-filter sieve_pipe_bin_dir = /dovecot/etc/dovecot/sieve-pipe sieve_pipe_socket_dir = sieve-pipe sieve_plugins = sieve_extprograms } postmaster_address = postmaster(a)xxxxdomain.com sendmail_path = /dovecot/sbin/sendmail service dict { unix_listener dict { user = dovecot } } service imap-postlogin { executable = script-login /dovecot/etc/dovecot/imappostlogin user = $default_internal_user } service imap { executable = imap imap-postlogin } ssl = no userdb { args = uid=dovecot gid=dovecot home=/dovecot/var/mailboxes/%%2Mu/%%2.2Mu/%%u driver = static } protocol lmtp { mail_plugins = acl sieve } protocol lda { mail_plugins = acl sieve } protocol imap { mail_plugins = acl imap_acl }

1 0

Structure of dovecot.index.pvt.log
by Miloslav Hůla 03 Aug '15

03 Aug '15

Hi, we are migrating from Cyrus to Dovecot and I would like to migrate seen flags for shared folder too. We have Dovecot 2.2.13 prepared as: location = maildir:/vmail/user/%%n/Maildir:INDEXPVT=/vmail/user/%n/Maildir/Shared/%%n Now I'm looking for 'dovecot.index.pvt.log' syntax to be able migrate Seen flags. All I know is, that index contains messages UID and Seen flag. May I ask you for a link to doc (if it exists) or into a source code? Should I care about 'dovecot.index.pvt.log' timestamps? Thank you, Milo

1 0

Question RE listescape and separators
by Jakob Curdes 30 Jul '15

30 Jul '15

Hello, we just start moving a large number of mailboxes to a new dovecot server with dovecot 2.0.9 (from CentOS) and sdbox as mailbox type. We use imapsync so there is no issue with mailbox type conversion. However, in test runs I noted that some mail folders,e.g. with dots in them, could not be transferred; dovecot says Couldn't create folder [7.8) Personnel] from [7.8) Personnel]: 106 NO Character not allowed in mailbox name: '.' We have the separator "/" defined for our only namespace so the dot should not be an issue!? I tried to use listescape but either the plugin is not loading (how can I verify this?) or it does not escape the dot in the mailbox name. The listescape settings are the defaults: namespace { separator = / (...) } mail_plugins = $mail_plugins listescape plugin { listescape_char = "\\" } What am I doing wrong? How can I make dots in mailboxes possible? Best regards, Jakob Curdes

1 0

Re: Sieve case insensitive detail part
by Peter Chiochetti 30 Jul '15

30 Jul '15

Am 2015-07-30 um 01:07 schrieb Sascha: > Ich hab mehr als 30-40 Ordner, die ich per + Zeichen direkt adressiere. > […] Adressen gezielt zu filtern, ohne Sieve zu konfigurieren, hab nicht > immer gleich zugriff ein Sieve Client (bei Neuvergabe, wurden die Ordner > angelegt, wenn auch erst mal in der Schreibweise der Adresserweiterung. > Ich habe das ganze schon befürchtet und muss wohl doch über sieve > nachdenken, um mein Problem zu lösen. Hello Sascha, sieve scripts are quite easy, see Steffen's example. I think what you want your script to do is: With any detail part, lowercase it, file message into detail folder, create as necessary. Something like auto-variables in Makfiles, where the rule gets its value from the target, e.g. -- peter

1 0

Re:\ help, permissions issues‏
by josh schooler 29 Jul '15

29 Jul '15

both of my other servers its owned by exim, the permissions in the other two servers are 644, and dovecot starts just fine on those, I don't know what happened I updated my server from opensuse 12.1 to 13.2 and now dovecot is refusing to start.> From: alvin.sm(a)Mail.Linux-Consulting.com> Subject: Re: help, permissions issues> To: dovecot(a)dovecot.org> Date: Mon, 27 Jul 2015 14:47:14 -0700> CC: alvin.sm(a)Mail.Linux-Consulting.com> > > hi> > > Hey everyone I've tried changing the permissions with the file it is telling me is giving me the issue, restarted exim and the computer, but still can't get dovecot to start.> > > > 2.2.13> > > dovecot -F> > doveconf: Fatal: Error in configuration file /etc/dovecot/conf.d/10-ssl.conf line 14: ssl_cert: Can't open file /etc/exim/openssl/exim.crt: Permission denied> > wag ...> > chown root.root /etc/exim/openssl> chmod 750 /etc/exim/openssl> > chown root.root /etc/exim/openssl/exim.*> chmod 400 /etc/exim/openssl/exim.*> > OpenSSL certs should always be read only by root> > you might want to check the docs regarding uid/gid running dovecot > and uid/gid of dovenull> and permissions for the dovecot dir tree /etc/dovecot*> > wag ... i think it should not be owned by exim> > ...> > > ssl_cert = </etc/exim/openssl/exim.crt> > ssl_key = </etc/exim/openssl/exim.key> > pixie dust> alvin> - http://NetworkNightmare.net/OpenSSL> - http://DDos-Mitigator.net

3 4

Deafness
by Steffan Cline 29 Jul '15

29 Jul '15

I’ve started in the last day or so having issues where users get a timeout when connecting to dovecot. The iPhone interprets this as an auth issue but re-entering the password makes no change. Outlook will either just not connect to it at all or it gives an error to re-enter the password also with no change. This happens within an hour of a "service dovecot restart". I’m using CentOS 6 with dovecot 2.0.9 from the centos repos. There’s nothing visible in the logs. Suggestions of what to check for? Thanks, Steffan

6 9

dbox: message internal date
by Francesco 29 Jul '15

29 Jul '15

Hello everyone and thanks in advance for the help :) I'm trying to figure out where does dovecot store the message internal date when using single dbox storage format. In Maildir format, the internal date is determined by the actual date of the file on the filesystem, but in dbox it doesn't seem to be the case. I'm looking forward for a way to modify a message internal date when on a dovecot instance running dbox storage engine, maybe anyone knows if it's possible and how to accomplish this? Again, thank you for the help Sincerely Francesco

1 0

sharing INBOX with ACL -> share all folders
by Marco Giunta 28 Jul '15

28 Jul '15

Hi at all, I have a problem with ACL; I want to share INBOX and Sent folder to an other user, but when I configure ACL on INBOX, all folders are shared (Sent, Junk, Draft, Trash, etc) # doveadm acl get -u janedoe INBOX ID Global Rights user=johndoe expunge insert lookup post read write write-deleted write-seen # doveadm acl get -u janedoe Sent ID Global Rights user=johndoe expunge insert lookup post read write write-deleted write-seen # doveadm acl get -u janedoe Trash ID Global Rights # doveadm acl get -u janedoe Drafts ID Global Rights # doveadm acl get -u janedoe Junk ID Global Rights # doveadm mailbox list -u johndoe Trash Junk Drafts Sent Archives Archives.2015 Other Users Other Users.janedoe Other Users.janedoe.Junk Other Users.janedoe.Drafts Other Users.janedoe.Sent Other Users.janedoe.Trash Other Users.janedoe.INBOX INBOX If I remove the INBOX ACL, only 'Sent' folder is shared, as expected: # doveadm acl delete -u janedoe INBOX johndoe # doveadm mailbox list -u provahe Trash Trash.saved-messages Junk Drafts Sent INBOX_spam Archives Archives.2015 Archives.2015.INBOX_spam Other Users Other Users.janedoe Other Users.janedoe.Sent INBOX My Dovecot instance use a single user, and all my mailboxes use standard maildir files: drwx------ 9 vmail mail 0 Jul 28 10:59 . drwx------ 12 vmail mail 3864 Jul 28 09:39 .. drwx------ 2 vmail mail 0 Jul 28 09:51 cur -rw------- 1 vmail mail 0 Jul 28 10:59 dovecot-acl -rw------- 1 vmail mail 16 Jul 28 10:59 dovecot-acl-list -rw------- 1 vmail mail 1448 Jul 28 09:51 dovecot.index.cache -rw------- 1 vmail mail 1016 Jul 28 09:52 dovecot.index.log -rw------- 1 vmail mail 113 Jul 28 09:51 dovecot-uidlist -rw------- 1 vmail mail 8 Jul 28 09:39 dovecot-uidvalidity -r--r--r-- 1 vmail mail 0 Jul 28 09:39 dovecot-uidvalidity.55b731ac drwx------ 5 vmail mail 0 Jul 28 09:39 .Drafts lrwxrwxrwx 1 vmail mail 5 Jul 28 09:39 .INBOX_spam -> .Junk drwx------ 5 vmail mail 0 Jul 28 09:39 .Junk -rw------- 1 vmail mail 16 Jul 28 09:39 maildirsize drwx------ 2 vmail mail 0 Jul 28 09:51 new drwx------ 5 vmail mail 0 Jul 28 09:50 .Sent -rw------- 1 vmail mail 37 Jul 28 09:39 subscriptions drwx------ 2 vmail mail 0 Jul 28 09:51 tmp drwx------ 5 vmail mail 0 Jul 28 09:39 .Trash any clue to solve my problem ?? I've already try to play with 'acl_defaults_from_inbox' setting, but no way .. Thank you, Marco # 2.2.15: /etc/dovecot/dovecot.conf # Pigeonhole version 0.4.6 (3e924b1b6c5c+) # OS: Linux 2.6.18-400.1.1.el5 x86_64 Red Hat Enterprise Linux Server auth_master_user_separator = * auth_mechanisms = plain login disable_plaintext_auth = no doveadm_password = XXXXXXXXXXXXXXXXXXXXXXXX doveadm_port = 12345 first_valid_uid = 200 hostname = xxxxxxx.sissa.it imap_client_workarounds = delay-newmail lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes lda_original_recipient_header = X-Original-To listen = * login_log_format_elements = user=<%u> PID=%p method=%m rip=%r lip=%l %c login_trusted_networks = XXX.XXX.1.172/30 XXX.XXX.24.0/23 mail_gid = mail mail_home = /var/spool/mail/%1n/%n mail_location = maildir:/var/spool/mail/%1n/%n:INDEX=/var/shared/indexes/%1n/%n mail_plugins = acl fts fts_solr mailbox_alias quota mail_shared_explicit_inbox = yes mail_uid = vmail maildir_very_dirty_syncs = yes managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave duplicate imapflags notify mbox_write_locks = fcntl mmap_disable = yes namespace archives { hidden = no inbox = no list = children location = maildir:/var/spool/archives/%1n/%n:INDEX=/var/shared/indexes/%1n/%n/archives mailbox 2015 { auto = subscribe special_use = \Archive } prefix = Archives. separator = . subscriptions = no type = private } namespace inbox { inbox = yes location = mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox INBOX_spam { auto = subscribe special_use = \Junk } mailbox Junk { auto = subscribe special_use = \Junk } mailbox Sent { auto = subscribe special_use = \Sent } mailbox Trash { auto = subscribe special_use = \Trash } prefix = separator = . } namespace others { list = children location = maildir:/var/spool/mail/%%1n/%%n:INDEXPVT=/var/shared/indexes/%1n/%n/shared/%%n prefix = Other Users.%%n. separator = . subscriptions = no type = shared } passdb { args = /etc/dovecot/passwd.masterusers driver = passwd-file master = yes pass = yes } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { acl = vfile:/etc/dovecot/global-acls:cache_secs=300 acl_defaults_from_inbox = no acl_shared_dict = file:/var/shared/dovecot/shared-mailboxes.dict fts = solr fts_autoindex = yes fts_autoindex_max_recent_msgs = 20 fts_solr = url=http://solr.localdomain:8080/solr/ mailbox_alias_new = INBOX_spam mailbox_alias_old = Junk quota = maildir:User quota:ns= quota2 = maildir:Archive quota:ns=Archives. quota2_rule = *:storage=20GB quota2_warning = storage=95%% quota2-warning 95 %u quota2_warning2 = storage=90%% quota2-warning 90 %u quota2_warning3 = storage=80%% quota2-warning 80 %u quota_rule = *:storage=5GB quota_rule2 = Trash:storage=+20%% quota_status_nouser = DUNNO quota_status_overquota = 552 5.2.2 Quota exceeded (mailbox for user is full) quota_status_success = DUNNO quota_warning = storage=100%% quota-warning 100 %u quota_warning2 = storage=95%% quota-warning 95 %u quota_warning3 = storage=90%% quota-warning 90 %u quota_warning4 = storage=80%% quota-warning 80 %u sieve = file:~/sieve;active=~/sieve/.dovecot.sieve sieve_default = /etc/dovecot/sieve/dovecot.sieve sieve_extensions = +notify +imapflags sieve_max_redirects = 16 } pop3_client_workarounds = outlook-no-nuls oe-ns-eoh postmaster_address = postmaster(a)sissa.it protocols = imap pop3 lmtp sieve rejection_reason = Your message to <%t> was automatically rejected for the following reason: %n%n%r service auth { inet_listener { port = 49494 } unix_listener auth-userdb { user = vmail } } service dict { unix_listener dict { user = vmail } } service doveadm { inet_listener { port = 26001 } } service imap-login { process_min_avail = 16 service_count = 0 } service imap { process_limit = 2048 } service lmtp { inet_listener lmtp { port = 24 } process_min_avail = 5 } service managesieve-login { inet_listener sieve { port = 4190 } inet_listener sieve_deprecated { port = 2000 } process_min_avail = 16 service_count = 0 vsz_limit = 256 M } service quota-status { client_limit = 1 executable = /usr/libexec/dovecot/quota-status -p postfix inet_listener { port = 25001 } } service quota-warning { executable = script /usr/local/bin/dovecot-quota-warning.sh unix_listener quota-warning { user = vmail } user = vmail } service quota2-warning { executable = script /usr/local/bin/dovecot-quota2-warning.sh unix_listener quota2-warning { user = vmail } user = vmail } ssl_cert = </etc/pki/dovecot/certs/xxxxx-crt.pem ssl_key = </etc/pki/dovecot/private/Xxxxx-key.pem ssl_protocols = !SSLv2 !SSLv3 submission_host = xxxxxx.sissa.it:25 syslog_facility = local2 userdb { driver = prefetch } userdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } protocol lmtp { mail_plugins = acl fts fts_solr mailbox_alias quota sieve postmaster_address = xxxxxxx(a)sissa.it } protocol lda { info_log_path = log_path = mail_plugins = acl fts fts_solr mailbox_alias quota sieve syslog_facility = local2 } protocol imap { mail_max_userip_connections = 50 mail_plugins = acl fts fts_solr mailbox_alias quota imap_quota imap_acl } protocol sieve { mail_max_userip_connections = 50 } protocol pop3 { mail_max_userip_connections = 50 } -- ----------------------------------- |Marco Giunta - SISSA Computer Staff| |Via Bonomea, 265 | |34136 - Trieste, Italy | |Tel: +39-40-3787-503 | |Fax: +39-040-3787-244 | |e-mail: giunta(a)sissa.it | -----------------------------------

3 3

help, permissions issues
by josh schooler 28 Jul '15

28 Jul '15

Hey everyone I've tried changing the permissions with the file it is telling me is giving me the issue, restarted exim and the computer, but still can't get dovecot to start. 2.2.13 > dovecot -F doveconf: Fatal: Error in configuration file /etc/dovecot/conf.d/10-ssl.conf line 14: ssl_cert: Can't open file /etc/exim/openssl/exim.crt: Permission denied > dovecot -n # 2.2.13: /etc/dovecot/dovecot.conf # OS: Linux 3.16.7-21-desktop x86_64 openSUSE 13.2 (x86_64) auth_verbose = yes base_dir = /var/run/dovecot/ debug_log_path = /var/log/dovecot/debug doveadm_worker_count = 10 first_valid_uid = 1000 info_log_path = /var/log/dovecot/dovecot.info login_trusted_networks = 127.0.0.1 192.168.1.0/24 174.75.35.100 174.75.35.98 mail_location = mbox:~/mail:INBOX=/var/spool/mail/%u managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace inbox { inbox = yes location = prefix = } passdb { driver = pam } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } pop3_uidl_format = %v-%u protocols = pop3 service pop3-login { inet_listener pop3s { port = 995 ssl = yes } } ssl_cert = </etc/exim/openssl/exim.crt ssl_key = </etc/exim/openssl/exim.key userdb { driver = passwd } protocol pop3 { mail_max_userip_connections = 30 }

2 1

LMPT SSL
by Piotr Rotter 27 Jul '15

27 Jul '15

Hello, I tryed to eneble TLS connection from postfix to dovecot lmtp. Unfortunely I have problem with certificate, postfix shows, 2015-07-27T12:51:15.025333+02:00 k30 postfix/lmtp[4572]: Untrusted TLS connection established to 192.168.67.30[192.168.67.30]:24: TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits) I checked certs by openssl s_client: #openssl s_client -connect localhost:24 -showcerts -starttls smtp -CApath /etc/ssl/certs/ And I gets didn't found starttls in server response, try anyway... depth=0 OU = GT46258006, OU = See www.rapidssl.com/resources/cps (c)15, OU = Domain Control Validated - RapidSSL(R), CN = mail.active24.pl verify error:num=20:unable to get local issuer certificate verify return:1 depth=0 OU = GT46258006, OU = See www.rapidssl.com/resources/cps (c)15, OU = Domain Control Validated - RapidSSL(R), CN = mail.active24.pl verify error:num=27:certificate not trusted verify return:1 depth=0 OU = GT46258006, OU = See www.rapidssl.com/resources/cps (c)15, OU = Domain Control Validated - RapidSSL(R), CN = mail.active24.pl verify error:num=21:unable to verify the first certificate verify return:1 It look likes dovecot lmtp send 3 times the same certificate. I made the same test for imap in the same dovecot instance: #openssl s_client -connect localhost:143 -showcerts -starttls imap -CApath /etc/ssl/certs/ CONNECTED(00000003) depth=2 C = US, O = GeoTrust Inc., CN = GeoTrust Global CA verify return:1 depth=1 C = US, O = GeoTrust Inc., CN = RapidSSL SHA256 CA - G3 verify return:1 depth=0 OU = GT46258006, OU = See www.rapidssl.com/resources/cps (c)15, OU = Domain Control Validated - RapidSSL(R), CN = mail.active24.pl verify return:1 For imap it looks ok. Why lmtp shows wrong certs list # dovecot --version 2.2.16 -- Pozdrawiam! / Best regards! ------------------ Piotr Rotter Konsultant IT / IT Consultant =========================================== http://www.ACTIVE24.pl - Powerful hosting - surprisingly easy =========================================== ul. Barkocińska 6, 03-543 Warszawa PL Email: bok(a)active24.pl Tel: +48 222 950 446

2 2

Importing mbox archives into a inbox?
by Paul Hoffman 27 Jul '15

27 Jul '15

Greetings from a dovecot newbie. I have a bunch of mailing list archives (in mbox) format that I want to dump into the inbox for a particular account on the system. I want them to retain all of their information, particularly the date. I'm not seeing how to do this, but I could be missing it. Is this LDA or LMTP with some command-line options I'm not seeing? --Paul Hoffman

2 1

POP3 getting previously delivered messages.
by Jas Reehal 24 Jul '15

24 Jul '15

Hi All, This is my first post to this list. I have recently upgraded to dovecot version 2.2.10. 1. I have one POP3 user who does not want to delete his email on the server. 2. He has accumulated over 19000 messages, and the 'dovecot.uidlist' file has more than 19000 lines! 3. Occasionally now when he has received one or more new emails, and his email client does a 'get new mail' operation (POP3) he begins to receive email he has already received previously. last time this happened all 19000+ messages were delivered again, leaning to duplicate entries in all his mailboxes. I have reproduced this issue with a dummy email account with a POP3 client, leaving all messages on the server. I have delivered 20000 messages to this email account, each about 1.3k ins size and each with .... Subject: Message number <n> Body containing "Message number <n>" where <n> is 1 to 20000 now occasionally if I send another message to this email account, and then check for new messages using a POP3 client I get more messages downloaded than I expect! The 'dovecot.uidlist' file is not corrupt, but I beleive due ti it's size (number of lines) the is an issue on compiling a ' POP3 drop-list'. I have attached a file 'dovecot-a.txt' which shows the 'dovecot -a' output from my server. Based on what I have investigated I believe that this issue may not be correlated with a migration to version 2.2.10, but more to do with the number of messages retained on the server. Is there anyone who has any insight into what is happening and if there is any remedy, perhaps a "pop3_client_workarounds =" or other POP3 or UIDL directive in the conf files? The user is stubbornly resisting migration to IMAP, because of the time and effort he says will be required to replicate his organised filing/storage of messages on the server. Kind Regards Jas Reehal -- Jas Reehal | IT & Networks Consultant *Zuken Limited - /The Partner for Success/* 1500 Aztec West, Almondsbury, Bristol, BS32 4RF, United Kingdom T: +44 1454 207824 | F: +44 1454 207803 E: jas.reehal(a)zuken.co.uk <mailto:jas.reehal@zuken.co.uk> | W: www.zuken.com <http://www.zuken.com> Connect with Zuken: blog <http://blog.zuken.com> | youtube <http://www.youtube.com/zukentube> | linkedin <http://www.zuken.com/linkedin> | twitter <http://www.zuken.com/twitter> | facebook <http://www.zuken.com/facebook> Zuken Ltd // Registered office: Bristol // Registered No. 956340 // Directors: Jinya Katsube, Kazuhiro Kariya, S Yukawa This e-mail message from Zuken including any attachments is intended only for the individual or entity to which it is addressed. This e-mail may contain privileged, proprietary, or otherwise private information. If you are not the intended recipient of this e-mail, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you received this e-mail by accident, please notify the sender immediately and destroy this e-mail and all copies of it.

2 1

possible patch for ACL SQL ERROR: duplicate key value violates unique constraint "user_shares_pkey"
by Steffen Kaiser 24 Jul '15

24 Jul '15

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I'm using Postgres as dict backend now and then I get this error, when someone changed ACLs, actually for some reason some users, who get permission from other users, get this error quite often: dict: Error: sql dict: commit failed: ERROR: duplicate key value violates unique constraint "user_shares_pkey" (query: INSERT INTO user_shares (dummy,to_user,from_user) VALUES ('1','user1','user2')) It looks like that this error is triggered, when a MUA is connecting to Dovecot after ACLs had been changed and opens several mailboxes at once. So two or parallel Dovecot instances try to insert the record simultaneously. With a similiar technique to the quota problem, I added a trigger. The idea is to use the condition dummy ISNULL to detect, that the function was triggered from the INSERT of the function itself, hence, breaking the recursive triggers. This assumes that dummy is never NULL from Dovecot. The same applies to anyone_shares, just remove the to_user field from the function. Does somebody see something wrong with my hack? ============= CREATE FUNCTION insert_sharing() RETURNS trigger LANGUAGE plpgsql AS $$ BEGIN IF NEW.dummy IS NULL THEN -- ugly kludge: we came here from this function, really do try to insert return NEW; END IF; LOOP UPDATE user_shares SET dummy = NEW.dummy WHERE from_user = NEW.from_user AND to_user = NEW.to_user; IF found THEN -- updated and inserted RETURN NULL; END IF; BEGIN INSERT INTO user_shares (from_user,to_user,dummy) VALUES (NEW.from_user,NEW.to_user,NULL); --- return NULL; EXCEPTION WHEN unique_violation THEN -- someone just inserted the record, update it END; -- Update dummy after INSERT END LOOP; END; $$; CREATE TRIGGER insertsharing BEFORE INSERT ON user_shares FOR EACH ROW EXECUTE PROCEDURE insert_sharing(); - -- Steffen Kaiser -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEVAwUBVbHxJXz1H7kL/d9rAQIn5gf/dNMQKmmigGrbccGQQrsGU66B6OHvTY7L 1vyh8hgr985KNk2/Ws/usLnAqpl5jhpo8kVPLI8TqcGYLAS/67TOIFrwLKAEBU96 e+QpbqqiSm66mZwWOQZgCI63+Fh7fdBUMREL6UqGleFF1GrzNnjmX4MGecbpu/L9 gQMAGUG++/S+ka9S6B275RXIj9DvWzq/oYqJ1M1grGckUxXfDk5szLyvuIJ981At 20qaCHEIlIOlkQ0ttE4W+RWkkYS2rMJvCzQelF4pcm6vaxhXxvqUryzmy9pv+UUT osqS6igWt7BPXF7ku8+rKYVp/qPZrh9IWXMsajr/2nI+V5gRb6u2ow== =gb1P -----END PGP SIGNATURE-----

1 0

Authenticate system user with alternate password
by AC 23 Jul '15

23 Jul '15

Is there a way to configure Dovecot to authenticate a system user against a different password list? I want to give my own personal account on my machine a password for IMAP and have that be different from the password I use to log into the system for maintenance purposes. I currently do this for outbound email by having the MTA authenticate against a SASL database during the initial SMTP connection (STARTTLS).

2 1

Client Limit reached in Dovecot
by Chandran Manikandan 22 Jul '15

22 Jul '15

Dear Friends, I have faced below issues since two weeks to till now. Could anyone help me to rectify this issue. Below message retrieve from logs and getting disconnection from Outlook and other email clients. Error Message Jul 20 10:33:35 master: Warning: service(imap-login): process_limit (100) reached, client connections are being dropped My local.conf from dovecot folder protocol imap { imap_client_workarounds = "delay-newmail" mail_max_userip_connections = 20 default_process_limit = 300 } 10-master.conf default_process_limit = 300 default_client_limit = 1000 service imap-login { inet_listener imap { # process_limit = 15 # client_limit = 300 #port = 143 } -- *Thanks,* *Manikandan.C* *System Administrator*

2 2

dovecot proxy/director and high availability design
by Chad M Stewart 21 Jul '15

21 Jul '15

I'm trying to determine which dovecot components to use and how to order them in the network path from client to mail store. If I have say 1,000 users, all stored in MySQL (or LDAP) and have 4 mail stores, configured into 2, 2 node pods. MS1 and MS2 are pod1 and are configured with replication (dsync) and host users 0-500. MS3 and MS4 are pod2 and are configured with replication between them and host users 501-1000. Ideally the active connections in pod1 would be split 50/50 between MS1 and MS2. When maintenance is performed obviously all active connections/users would be moved to the other node in the pod and then rebalanced once maintenance is completed. I'm not sure if I need to use both the proxy and director, or just one or the other? If both then what is the proper path, from a network perspective? I like the functionality director provides, being able to add/remove servers on the fly and adjust connections, etc.. But from what I've read director needs to know about all mail servers. The problem is that not all servers host all users. User100 could be serviced by ms1 or ms2, but not by ms3 or ms4. I'm trying to design a system that should provide as close to 99.999% service availability as possible. Thank you, Chad

5 8

SSL accept error
by jjhoffart 21 Jul '15

21 Jul '15

Hello, I am having some trouble isolating an issue with my mail server. In my mail log I keep receiving the following errors: SSL_accept:failed in SSLv3 read client certificate A SSL_accept: error form client(a)mydomain.com: lost connection SSL_accept:SSLv3 flush data I have look through both my dovecot and postfix configs but have not been able to isolate the issue yet, hoping someone might be able to help.

3 2

Re: Client Limit reached in Dovecot
by Daniel Tröder 21 Jul '15

21 Jul '15

Hallo :) On mailinglists please reply below the previous post. It's easier to read this way. Am 21.07.2015 um 11:26 schrieb Chandran Manikandan: > Dear Daniel, > Thanks for your kind response. As per your above command got below > result. but i couldn't see below settings are local.conf,10-master.conf > or toaster.conf. Where it's retrieved. > default_process_limit=100 > default_client_limit=1000 > default_vsz_limit=256 M > service/imap/process_limit=1024 > service/imap/client_limit=1 > service/imap/service_count=1 > service/imap/vsz_limit=18446744073709551615 B > service/imap-login/process_limit=0 > service/imap-login/client_limit=0 > service/imap-login/service_count=1 > service/imap-login/vsz_limit=18446744073709551615 B My guess is, that service/imap-login/process_limit=0 disables the setting and then default_process_limit=100 applies. As to where default_process_limit=100 comes from… try: grep -r default_process_limit /etc/dovecot Greeting Daniel > > > > On Tue, Jul 21, 2015 at 4:56 PM, Daniel Tröder <troeder(a)univention.de > <mailto:troeder@univention.de>> wrote: > > Am 21.07.2015 um 10:35 schrieb Chandran Manikandan: > > Dear Friends, > > I have faced below issues since two weeks to till now. Could anyone help me > > to rectify this issue. > > > > Below message retrieve from logs and getting disconnection from Outlook and > > other email clients. > > > > Error Message > > > > Jul 20 10:33:35 master: Warning: service(imap-login): process_limit (100) > > reached, client connections are being dropped > > > > My local.conf from dovecot folder > > > > protocol imap { > > imap_client_workarounds = "delay-newmail" > > mail_max_userip_connections = 20 > > default_process_limit = 300 > > } > This should be just "process_limit" without "default". But it's > unnecessary, as you set globally default_process_limit. > > > 10-master.conf > > > > default_process_limit = 300 > > default_client_limit = 1000 > > > > service imap-login { > > inet_listener imap { > > # process_limit = 15 > > # client_limit = 300 > > #port = 143 > > } > It is the "imap-login" process_limit that is reached. With the set > default_process_limit=300 this shouldn't happen. So maybe there is some > setting somewhere else, that is not shown. Please supply the output of: > > doveconf -S | egrep '(default|imap/|imap-login).*(limit|service_count)' > > Greetings > Daniel Tröder > > > > > -- > *Thanks,* > *Manikandan.C* > *System Administrator*

1 0

Dovecot in UCS
by Daniel Tröder 21 Jul '15

21 Jul '15

Hello :) I hope you can forgive me a little advertisement: The English translation of my blog post on the Dovecot integration I did for the Univention Corporate Server (UCS) is online: https://www.univention.com/2015/07/dovecot-is-the-default-imappop3-mail-ser… UCS is a Debian based Linux Distribution, everything - incl. management bits - is OSS. There is a "Core Edition" that you can download and use (also commercially) for free, that is - despite its name - feature complete: https://www.univention.com/downloads/ucs-download A lot of interesting Dovecot features can be changed without breaking things, so this blog post may be interesting to everyone. The German version can be found here: https://www.univention.de/2015/07/mailserver-dovecot-als-standard-imappop3-… Greetings Daniel Tröder

1 0

[Dovecot] Dovecot FTS using ElasticSearch
by Darvin Denmian 21 Jul '15

21 Jul '15

Hi, I would like to know if is possible to use ElasticSearch instead of Solr for FTS. Regards, Erick Vitor de Barros.

6 6

[Dovecot Antispam] Can't seem to load plugin
by James Lott 21 Jul '15

21 Jul '15

Hello list, I'm hoping there is a user of the antispam plugin out there who might be able to lend a pointer or two. I am running dovecot 2.2.18 on FreeBSD 10 (doveconf -n attached), where I have installed the binary dovecot2-antispam-plugin package. I have put together what should, in my estimation, be a working configuration for the plugin. I have reviewed the man page and the online documentation, and I think at the *very least* I should be seeing errors for something not working correctly. However, what I have is a great deal more troubling. There is no sign on the plugin even attempting to load. No log entries, no errors, nothing. The plugin is definitely in the right place with the right name, since I let the package manager handle all of that for me root@zerolag:~ # ls -l /usr/local/lib/dovecot/lib90_antispam_plugin.so -rwxr-xr-x 1 root wheel 32488 Jul 2 09:41 /usr/local/lib/dovecot/lib90_antispam_plugin.so I am unable to make any sense of this. Thanks in advance for any pointers :) -- James Lott

4 6