- dovecot - dovecot.org

Installing fts-solr on dovecot (centos 6) - [request for help]
by Kevin Laurie 18 Apr '15

18 Apr '15

Hello, I have been trying to get full-text-search on dovecot. I followed the tutorial on this site:- https://extremeshok.com/6622/enabling-apache-solr-4-10-using-jetty-with-dov… The instruction on the page here seems wrong:- sed -i -e 's|mail_plugins = quota|mail_plugins = quotann# Enable fts fts_solr plugin globally for Solr Full Text Search Indexingnmail_plugins = $mail_plugins fts fts_solrnnplugin {nfts = solrn#break-imap-search will use solr for indexing TEXT and BODY searches.nfts_solr = break-imap-search url=http://127.0.0.1:8983/solr/nfts_autoindex = yesn}|' /etc/dovecot.conf I would appreciate if someone could help correct the parameters for the dovecot.conf output shown below. Please help. [root@mail tmp]# cat /etc/dovecot/dovecot.conf # Listen addresses. # - '*' means all available IPv4 addresses. # - '[::]' means all available IPv6 addresses. # Listen on all available addresses by default listen = * [::] #base_dir = /var/run/dovecot mail_plugins = quotann# Enable fts fts_solr plugin globally for Solr Full Text Search Indexingnmail_plugins = $mail_plugins fts fts_solrnnplugin {nfts = solrn#break-imap-search will use solr for indexing TEXT and BODY searches.nfts_solr = break-imap-search url=http://127.0.0.1:8983/solr/nfts_autoindex = yesn} acl # Enabled mail protocols. protocols = pop3 imap sieve lmtp # User/group who owns the message files: mail_uid = 2000 mail_gid = 2000 # Assign uid to virtual users. first_valid_uid = 2000 last_valid_uid = 2000 # Logging. Reference: http://wiki2.dovecot.org/Logging log_path = /var/log/dovecot.log mail_debug = no auth_verbose = no auth_debug = no auth_debug_passwords = no # Possible values: no, plain, sha1. auth_verbose_passwords = no # SSL: Global settings. # Refer to wiki site for per protocol, ip, server name SSL settings: # http://wiki2.dovecot.org/SSL/DovecotConfiguration ssl_protocols = !SSLv2 !SSLv3 ssl = required verbose_ssl = no #ssl_ca =</path/to/ca ssl_cert = </etc/pki/tls/certs/iRedMail.crt ssl_key = </etc/pki/tls/private/iRedMail.key # With disable_plaintext_auth=yes AND ssl=required, STARTTLS is mandatory. # Set disable_plaintext_auth=no AND ssl=yes to allow plain password transmitted # insecurely. disable_plaintext_auth = yes # Allow plain text password per IP address/net #remote 192.168.0.0/24 { # disable_plaintext_auth = no #} # Mail location and mailbox format. mail_location = maildir:/%Lh/Maildir/:INDEX=/%Lh/Maildir/ # Authentication related settings. # Append this domain name if client gives empty realm. auth_default_realm = # Authentication mechanisms. auth_mechanisms = PLAIN LOGIN # Limits the number of users that can be logging in at the same time. # Default is 100. # Note: this value can be overrided by "process_limit =" in service protocol. # e.g. # protocol imap-login { # ... # process_limit = 500 # } #default_process_limit = 100 service auth { unix_listener /var/spool/postfix/private/dovecot-auth { user = postfix group = postfix mode = 0666 } unix_listener auth-master { user = vmail group = vmail mode = 0666 } unix_listener auth-userdb { user = vmail group = vmail mode = 0660 } } # LMTP server (Local Mail Transfer Protocol). # Reference: http://wiki2.dovecot.org/LMTP service lmtp { user = vmail # For higher volume sites, it may be desirable to increase the number of # active listener processes. A range of 5 to 20 is probably good for most # sites. process_min_avail = 5 # Logging. # Require 'info_log_path =' in 'protocol lmtp {}' block. executable = lmtp -L # Listening on socket file and TCP unix_listener /var/spool/postfix/private/dovecot-lmtp { user = postfix group = postfix mode = 0600 } inet_listener lmtp { #address = 192.168.0.24 127.0.0.1 ::1 port = 24 } } # Virtual mail accounts. userdb { args = /etc/dovecot/dovecot-mysql.conf driver = sql } passdb { args = /etc/dovecot/dovecot-mysql.conf driver = sql } # Master user. # Master users are able to log in as other users. It's also possible to # directly log in as any user using a master password, although this isn't # recommended. # Reference: http://wiki2.dovecot.org/Authentication/MasterUsers auth_master_user_separator = * passdb { driver = passwd-file args = /etc/dovecot/dovecot-master-users master = yes } plugin { auth_socket_path = /var/run/dovecot/auth-master quota = dict:user::proxy::quotadict quota_rule = *:storage=1G #quota_rule2 = *:messages=0 #quota_rule3 = Trash:storage=1G #quota_rule4 = Junk:ignore # Quota warning. # If user suddenly receives a huge mail and the quota jumps from # 85% to 95%, only the 95% script is executed. quota_warning = storage=85%% quota-warning 85 %u quota_warning2 = storage=90%% quota-warning 90 %u quota_warning3 = storage=95%% quota-warning 95 %u # Plugin: autocreate. Create and subscribe to default IMAP folders. autocreate = INBOX autocreate2 = Sent autocreate3 = Trash autocreate4 = Drafts autocreate5 = Junk autosubscribe = INBOX autosubscribe2 = Sent autosubscribe3 = Trash autosubscribe4 = Drafts autosubscribe5 = Junk # Plugin: expire. #expire = Trash 7 Trash/* 7 Junk 30 #expire_dict = proxy::expire # ACL and share folder acl = vfile acl_shared_dict = proxy::acl # By default Dovecot doesn't allow using the IMAP "anyone" or # "authenticated" identifier, because it would be an easy way to spam # other users in the system. If you wish to allow it, #acl_anyone = allow # Pigeonhole managesieve service. # Reference: http://wiki2.dovecot.org/Pigeonhole/Sieve/Configuration # Per-user sieve settings. sieve_dir = /%Lh/sieve sieve = /%Lh/sieve/dovecot.sieve # Global sieve settings. sieve_global_dir = /var/vmail/sieve # Note: if user has personal sieve script, global sieve rules defined in # sieve_default will be ignored. Please use sieve_before or # sieve_after instead. #sieve_default = sieve_before = /var/vmail/sieve/dovecot.sieve #sieve_after = # The maximum number of redirect actions that can be performed during a # single script execution. The meaning of 0 differs based on your version. # For versions v0.3.0 and beyond this means that redirect is prohibited. # For older versions, however, this means that the number of redirects is # unlimited, so be careful. #sieve_max_redirects = 4 } service quota-warning { executable = script /usr/local/bin/dovecot-quota-warning.sh unix_listener quota-warning { user = vmail group = vmail mode = 0660 } } service dict { unix_listener dict { mode = 0660 user = vmail group = vmail } } dict { #expire = db:/var/lib/dovecot/expire/expire.db quotadict = mysql:/etc/dovecot/dovecot-used-quota.conf acl = mysql:/etc/dovecot/dovecot-share-folder.conf } protocol lda { # Reference: http://wiki2.dovecot.org/LDA mail_plugins = $mail_plugins sieve autocreate auth_socket_path = /var/run/dovecot/auth-master log_path = /var/log/dovecot-sieve.log lda_mailbox_autocreate = yes postmaster_address = root } protocol lmtp { # Log file info_log_path = /var/log/dovecot-lmtp.log # Plugins mail_plugins = quotann# Enable fts fts_solr plugin globally for Solr Full Text Search Indexingnmail_plugins = $mail_plugins fts fts_solrnnplugin {nfts = solrn#break-imap-search will use solr for indexing TEXT and BODY searches.nfts_solr = break-imap-search url=http://127.0.0.1:8983/solr/nfts_autoindex = yesn} sieve postmaster_address = postmaster lmtp_save_to_detail_mailbox = yes recipient_delimiter = + } protocol imap { mail_plugins = $mail_plugins imap_quota autocreate imap_acl imap_client_workarounds = tb-extra-mailbox-sep # Maximum number of IMAP connections allowed for a user from each IP address. # NOTE: The username is compared case-sensitively. # Default is 10. # Increase it to avoid issue like below: # "Maximum number of concurrent IMAP connections exceeded" mail_max_userip_connections = 20 } protocol pop3 { mail_plugins = $mail_plugins pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_uidl_format = %08Xu%08Xv # Maximum number of IMAP connections allowed for a user from each IP address. # NOTE: The username is compared case-sensitively. # Default is 10. mail_max_userip_connections = 20 } # Login processes. Refer to Dovecot wiki for more details: # http://wiki2.dovecot.org/LoginProcess service imap-login { service_count = 1 # To avoid startup latency for new client connections, set process_min_avail # to higher than zero. That many idling processes are always kept around # waiting for new connections. #process_min_avail = 0 # number of simultaneous IMAP connections #process_limit = $default_process_limit process_limit = 500 # vsz_limit should be fine at its default 64MB value #vsz_limit = 64M } service pop3-login { service_count = 1 # number of simultaneous POP3 connections #process_limit = 500 } namespace { type = private separator = / prefix = #location defaults to mail_location. inbox = yes } namespace { type = shared separator = / prefix = Shared/%%u/ location = maildir:/%%Lh/Maildir/:INDEX=/%%Lh/Maildir/Shared/%%u # this namespace should handle its own subscriptions or not. subscriptions = yes list = children } # Public mailboxes. # Refer to Dovecot wiki page for more details: # http://wiki2.dovecot.org/SharedMailboxes/Public #namespace { # type = public # separator = / # prefix = Public/ # # # CONTROL=: Mark this public folder as read-only mailbox # # INDEX=: Per-user \Seen flag # location = maildir:/var/vmail/public/:CONTROL=~/Maildir/public:INDEX=~/Maildir/public # # # Allow users to subscribe to the public folders. # subscriptions = yes #}

2 4

Please help: error after upgrade to version 2.1.16
by Harald Langner 18 Apr '15

18 Apr '15

Hallo I can not find a forum at dovecot.org and I get a problem I can not solve. After Updating to the version dovecot2 2.1.16 I can no more get eMails with my eMail-client. All has been working fine before. Server: FreeBSD 10.0-RELEASE-p18, with perl 5, version 18, subversion 4 (v5.18.4) It seems it is an authentication problem with my server. The errors are: #cat dovecot.log Apr 17 22:19:37 imap-login: Error: Timeout waiting for handshake from auth server. my pid=41810, input bytes=0 Apr 17 22:19:58 auth: Error: auth: environment corrupt; missing value for DOVECOT_ Apr 17 22:19:58 auth: Fatal: unsetenv(RESTRICT_SETUID) failed: Bad address Apr 17 22:19:58 master: Error: service(auth): command startup failed, throttling for 60 secs Apr 17 22:24:04 auth: Error: auth: environment corrupt; missing value for DOVECOT_ Apr 17 22:24:04 auth: Fatal: unsetenv(RESTRICT_SETUID) failed: Bad address Apr 17 22:24:04 master: Error: service(auth): command startup failed, throttling for 60 secs I have google and has nothing found about "..environment corrupt; missing value for DOVECOT_" and about "auth: Fatal: unsetenv(RESTRICT_SETUID) failed: Bad address" I have make a reinstall - but doesn't help. I get the same error. I have not forget to create new certs with the dovecote shell-script after installation. I'm using passwd (virtual users). Make a cat on passwd shows that it is not empty. Also the date of the file show that the update installation has it not changed. So I have not create the dovecot users again. here are some other logs: #cat dovecot-info.log Apr 17 22:29:03 imap-login: Info: Disconnected: Auth process broken (disconnected before auth was ready, waited 1 secs): user=<>, rip=85.181.222.126, lip=78.47.225.20, TLS handshaking Apr 17 22:29:33 imap-login: Info: Disconnected: Auth process broken (disconnected before auth was ready, waited 30 secs): user=<>, rip=85.181.222.126, lip=78.47.225.20, TLS Apr 17 22:29:33 imap-login: Info: Disconnected: Auth process broken (disconnected before auth was ready, waited 30 secs): user=<>, rip=85.181.222.126, lip=78.47.225.20, TLS #cat dovecot-debug.log Apr 17 22:30:03 auth: Debug: Loading modules from directory: /usr/local/lib/dovecot/auth Apr 17 22:30:03 auth: Debug: Read auth token secret from /var/run/dovecot//auth-token-secret.dat Apr 17 22:34:01 auth: Debug: Loading modules from directory: /usr/local/lib/dovecot/auth Apr 17 22:34:01 auth: Debug: Read auth token secret from /var/run/dovecot//auth-token-secret.dat Apr 17 22:34:01 imap-login: Debug: SSL: where=0x10, ret=1: before/accept initialization [85.181.222.126] Apr 17 22:34:01 imap-login: Debug: SSL: where=0x2001, ret=1: before/accept initialization [85.181.222.126] Apr 17 22:34:01 imap-login: Debug: SSL: where=0x2001, ret=1: SSLv3 read client hello A [85.181.222.126] Apr 17 22:34:01 imap-login: Debug: SSL: where=0x2001, ret=1: SSLv3 write server hello A [85.181.222.126] Apr 17 22:34:01 imap-login: Debug: SSL: where=0x2001, ret=1: SSLv3 write certificate A [85.181.222.126] Apr 17 22:34:01 imap-login: Debug: SSL: where=0x2001, ret=1: SSLv3 write key exchange A [85.181.222.126] Apr 17 22:34:01 imap-login: Debug: SSL: where=0x2001, ret=1: SSLv3 write server done A [85.181.222.126] Apr 17 22:34:01 imap-login: Debug: SSL: where=0x2001, ret=1: SSLv3 flush data [85.181.222.126] Apr 17 22:34:01 imap-login: Debug: SSL: where=0x2001, ret=1: SSLv3 read client certificate A [85.181.222.126] Apr 17 22:34:01 imap-login: Debug: SSL: where=0x2002, ret=-1: SSLv3 read client key exchange A [85.181.222.126] Apr 17 22:34:01 imap-login: Debug: SSL: where=0x2002, ret=-1: SSLv3 read client key exchange A [85.181.222.126] Apr 17 22:34:01 imap-login: Debug: SSL: where=0x2002, ret=-1: SSLv3 read client key exchange A [85.181.222.126] Apr 17 22:34:01 imap-login: Debug: SSL: where=0x2002, ret=-1: SSLv3 read client key exchange A [85.181.222.126] ######################################################################################## My configuration is sendmail(MTA) -> procmail(LDA) -> dovecot(IMAP) with TLS and Maildir (no DB) Authentification been done with dovecot password file (no real user, no OpenLDAP, no other DB-User) #dovecot -n # 2.2.16: /usr/local/etc/dovecot/dovecot.conf # OS: FreeBSD 10.0-RELEASE-p18 amd64 ufs auth_debug = yes auth_mechanisms = digest-md5 plain login auth_verbose = yes auth_verbose_passwords = plain base_dir = /var/run/dovecot/ debug_log_path = /var/log/dovecot-debug.log default_internal_user = vmail default_login_user = vmail deliver_log_format = msgid=%m: %$ %f %s disable_plaintext_auth = no first_valid_uid = 1000 hostname = swdevil.de info_log_path = /var/log/dovecot-info.log lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes log_path = /var/log/dovecot.log login_greeting = IMAPd ready. login_log_format_elements = user=<%u> method=%m rip=%r lip=%l mpid=%e %c mail_access_groups = mailnull mail_debug = yes mail_location = maildir:/home/vmail/%d/%n/:INBOX=/home/vmail/%d/%n/.INBOX mail_plugins = " virtual" mail_temp_dir = /tmp/mail namespace inbox { inbox = yes location = prefix = } passdb { args = scheme=DIGEST-MD5 username_format=%n /usr/local/etc/dovecot/pass driver = passwd-file } service auth-worker { group = wheel user = root } service imap-login { group = dovenull inet_listener imap { port = 0 } inet_listener imaps { port = 993 } } service imap { process_limit = 100 } service pop3-login { group = dovenull inet_listener pop3 { port = 0 } inet_listener pop3s { port = 0 } } service pop3 { process_limit = 100 } ssl = required ssl_cert = </usr/local/etc/dovecot/certs/dovecot_ssl_crt.pem ssl_key = </usr/local/etc/dovecot/certs/dovecot_ssl_key.pem userdb { args = uid=vmail gid=vmail home=/home/vmail/%d/%n driver = static } verbose_proctitle = yes verbose_ssl = yes protocol pop3 { pop3_uidl_format = %08Xu%08Xv } Many thanks for Your advice what could be wrong. Harald Langner EU (Germany)

2 3

Problem: mail moved by thunderbird script is invisible to mail clients, but in cur directory
by David Gessel 18 Apr '15

18 Apr '15

Over the last year I've had a script moving old mail (120 days) into my annual archive folder. This is the first year I've done this with Dovecot, previously it was running against Cyrus. There's nothing particularly clever: a few conditions to match, then "move message to" the appropriate archive folder. There's one for every year from 2000 to 2015. 2015 is just barely ahead of need. 2014 has about a year's mail in the cur directory. The 2000-2013 folders were filled by Cyrus and were migrated over using IMAP Migrate. They're fine, and read normally. The 2014 layout looks normal to me # ls cur dovecot-uidlist dovecot.index.cache dovecot.index.log.2 new dovecot-keywords dovecot.index dovecot.index.log maildirfolder tmp Permissions are the same as every other folder, as is owner: drw-r----- 2 vmail vmail 9.6K Apr 12 21:13 cur and # ls | wc -l 9822 I've checked with Thunderbird, Mulberry, Claws, and Sylpheed - none can read the directory. The files look normal: 2014/cur 1426411329.M123928P26360.host.domain.com,S=3523,W=3591:2,R More or less the same as a working directory: 2013/cur 1405500734.M958596P27867.host.domain.com,S=794,W=819:2,RS I've run # doveadm force-resync -u user .archives.2014 and nothing changed. I'm at a bit of a loss since no client can read them, something like moving them to another folder and back is a little complicated. Any hints?

3 3

ManageSieve Dovecot v2 listen on localhost only
by trash＠skrilnetz.net 17 Apr '15

17 Apr '15

Hi, How can I only listen on localhost for ManageSieve? I tried: port = localhost:4190 still listening *: tcp 0 0 0.0.0.0:4190 0.0.0.0:* LISTEN 0 515675 20540/dovecot Would did I not get here? Thanks,

3 5

Replace autocreate after upgrading
by trash＠skrilnetz.net 17 Apr '15

17 Apr '15

Hi, I just upgraded to 2.2.9 and found out that autocreate should not be used any more. I had a look at http://wiki2.dovecot.org/MailboxSettings and I tried to replace my old config but I had no success. Would somebody be so and help me to change my config? Here is my old config: http://pastebin.com/zFUAQmV3 Thanks,

2 1

Potentially breaking dict-proxy (dict-sql) backwards compatibility
by Timo Sirainen 17 Apr '15

17 Apr '15

Looks like the dict-proxy code doesn't currently do escaping newlines properly, but it still accidentally happens to work, because the data is stored in the escaped form. I'm thinking about fixing this, but this might break somebody's existing dict usage. But then again maybe nobody is actually using it now, especially because it hasn't been working exactly as expected. So, can anybody tell me if they're currently using a combination of: - dict proxy (especially to dict sql) - containing values which can contain LFs (or TABs) I guess this mainly means storing Sieve scripts or IMAP METADATA to SQL. Or maybe somebody is using dict (via proxy) for their own purposes?..

1 0

Calendar and address book with Dovecot
by mimicafe＠gmail.com 16 Apr '15

16 Apr '15

Hi guys Thanks for all your input. I'll feedback later... Mimi

1 0

Thunderbird sync time? (reverse quota warning)
by E.B. 16 Apr '15

16 Apr '15

For reverse quota warning, it looks like webmail works nice. quota_warning3 = -storage=100%% quota-warning below %u # user is no longer over quota But using thunderbird I deleted enough messages to go below quota and I deleted them from trash folder too. But mail log does not show thunderbird connecting to imap to actually delete mails and get the trigger below quota warning msg. It's i thinks a thundrbrd behavior but i wonder if anyone on this list knows how it works? Do i just keep waiting for it to sync eventually? or??????? TIA!

2 3

Dovecot and recipient_delimiter
by J. Echter 16 Apr '15

16 Apr '15

Hi, we're using thunderbird as our client, it has the functionality to sort spamassassin tagged mails in a folder called 'Junk'. I have this folder on my dovecot server and i'd like to use the recipient_delimiter feature to get my spam/junk mails directly to this folder. what i have done yet: dovecot.conf: plugin { recipient_delimiter = + } postfix: master.cf dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail null_sender= argv=/usr/libexec/dovecot/deliver -f ${sender} -d ${user}@${nexthop} -e -m ${extension} postfix: main.cf recipient_delimiter = + what i get: Apr 14 13:46:50 mule postfix/pickup[22664]: 71ED53C05EE: uid=0 from=<testuser(a)testdomain.test> Apr 14 13:46:50 mule postfix/cleanup[1408]: 71ED53C05EE: message-id=<552cfe2a.tR3wZK7y16RgA548%testuser(a)testdomain.test> Apr 14 13:46:50 mule postfix/qmgr[12559]: 71ED53C05EE: from=<testuser(a)testdomain.test>, size=465, nrcpt=2 (queue active) Apr 14 13:46:50 mule dovecot: lda(testuser(a)testdomain.test): msgid=<552cfe2a.tR3wZK7y16RgA548%testuser(a)testdomain.test>: save failed to junk: Mailbox doesn't exist: junk Apr 14 13:46:50 mule dovecot: lda(testuser(a)testdomain.test): msgid=<552cfe2a.tR3wZK7y16RgA548%testuser(a)testdomain.test>: saved mail to INBOX Apr 14 13:46:50 mule postfix/pipe[10898]: 71ED53C05EE: to=<testuser+Junk(a)testdomain.test>, relay=dovecot, delay=0.04, delays=0.02/0/0/0.02, dsn=2.0.0, status=sent (delivered via dovecot service) Apr 14 13:46:50 mule postfix/qmgr[12559]: 71ED53C05EE: removed here is my complete dovecot -n output: dovecot -n # 2.0.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-504.12.2.el6.x86_64 x86_64 CentOS release 6.6 (Final) ext4 auth_cache_negative_ttl = 0 auth_cache_size = 50 M auth_verbose = yes base_dir = /var/run/dovecot/ imap_id_log = * imap_id_send = * log_timestamp = "%Y-%m-%d %H:%M:%S " login_log_format_elements = user=<%u> method=%m rip=%r lip=%l mpid=%e %c %k mail_gid = 5000 mail_home = /DATEN/vmail/%d/%n mail_location = maildir:/DATEN/vmail/%d/%n/mail/ mail_plugins = " zlib" mail_uid = 5000 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave passdb { args = /etc/dovecot/dovecot-ldap.conf driver = ldap } plugin { autocreate = Junk autosubscribe = Junk recipient_delimiter = + sieve = /DATEN/vmail/%d/%n/.dovecot.sieve sieve_dir = /DATEN/vmail/%d/%n/sieve zlib_save = gz zlib_save_level = 6 } protocols = sieve imap service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-userdb { group = vmail mode = 0660 user = vmail } user = root } service imap-login { chroot = login executable = /usr/libexec/dovecot/imap-login inet_listener imap { port = 0 } process_min_avail = 4 user = dovecot } service imap { executable = /usr/libexec/dovecot/imap } service managesieve-login { chroot = login user = dovecot } service pop3-login { chroot = login user = dovecot } ssl = required ssl_cert = </shared/config/dovecot/certs/dovecot.pem ssl_cipher_list = ALL:!LOW:!SSLv2:!EXP:!aNULL:!EXPORT ssl_key = </shared/config/dovecot/private/dovecot.pem userdb { args = /etc/dovecot/dovecot-ldap.conf driver = ldap } valid_chroot_dirs = /var/spool/vmail protocol lda { mail_plugins = sieve postmaster_address = postmaster } any hints on what i do wrong here? thanks juergen

2 4

Disk space usage with mdbox
by Alexandros Soumplis 15 Apr '15

15 Apr '15

Hello, I am using dovecot with mdbox+sis and I notice an ever increasing disk space usage since I converted mailboxes from Maildir to mdboxes. I have checked with a user and while it actually uses only 65K, his mdbox files on disk are more than 6G. The backup of his mailbox is just 64K. Any suggestions ? Below are some relevant commands: [root@mail ~]# doveadm quota get -u test Quota name Type Value Limit % User quota STORAGE 10135 31457280 0 User quota MESSAGE 186 - 0 [root@mail ~]# du -k --max-depth=1 /mdboxes/test/ 220 /mdboxes/test/mailboxes 6029348 /mdboxes/test/storage 6029592 /mdboxes/test/ [root@mail ~]# doveadm purge -u test [root@mail ~]# du -k --max-depth=1 /mdboxes/test/ 220 /mdboxes/test/mailboxes 6029348 /mdboxes/test/storage 6029592 /mdboxes/test/ [root@mail ~]# doveadm backup -u test mdbox:/tmp/MDBOX_TEMP/ [root@mail ~]# du -k --max-depth=1 /tmp/MDBOX_TEMP/ 16 /tmp/MDBOX_TEMP/mailboxes 65540 /tmp/MDBOX_TEMP/storage 65568 /tmp/MDBOX_TEMP/

4 9

setting service_count results in Permission denied
by Micah Anderson 15 Apr '15

15 Apr '15

The load on our machines has gotten too high, so I started to see log messages that directed me to look at this page for config changes: https://pad.riseup.net/redirect#http%3A//wiki2.dovecot.org/SocketUnavailable One of the things I wanted to do on that page was to set the: service imap { service_count = 100 } but when I added that to the service imap block, and restarted dovecot, I see this in the logs: Error: net_connect_unix(/run/dovecot/imap-postlogin) failed: Permission denied I dont understand how this impacts permissions. Its clearly this setting, because when I remove it, things work again. I found nothing else in the logs indicating a configuration problem. This is what the config block looked like: service imap { # Most of the memory goes to mmap()ing files. You may need to increase this # limit if you have huge mailboxes. #vsz_limit = 256M # Max. number of IMAP processes (connections) process_limit = 4096 service_count = 100 executable = imap imap-postlogin } service imap-postlogin { # the script process runs as the user specified here (v2.0.14+): #user = $default_internal_user executable = script-login /usr/local/sbin/postlogin_imap # this UNIX socket listener must use the same name as given to imap executable unix_listener imap-postlogin { } } This is with dovecot 2.2.13, thanks for any help you can provide! micah

4 3

concurrent IMAP connections (plus 2 easy questions)
by Ron Cleven 15 Apr '15

15 Apr '15

I posted a few days back asking about configuration issues with a modestly large number of IMAP connections. Several people were kind enough to respond with various ideas. Armed with those ideas and Google, I was able to determine the underlying configuration issues with CentOS 7 and Dovecot 2.2.10. I did some further benchmarking to ensure that we could properly plan our server configuration requirements as we continue to roll this out, so I thought I would share this, partly to see if anyone has experiences that conflict with my findings. I found that each incremental dovecot IMAP process required about 750k of RAM. Simulations confirmed that 8 gig of RAM was sufficient to support approximately 10,000 concurrent IMAP connections (no POP3). CentOS settings: Added: fs/inotify/max_user_instances = 28000 to: /etc/sysctl.d/99-sysctl.conf Added: * hard nproc 28000 * soft nproc 28000 * hard nofile 28000 * soft nofile 28000 to: /etc/security/limits.d/20-nproc.conf To verify the settings after reboot: cat /proc/sys/fs/inotify/max_user_instances ulimit -Hn ulimit -Sn Dovecot: Added: process_limit = 28000 to service imap{} /etc/dovecot/conf.d/10-master.conf Added (using proxies, would like to just turn off this check): mail_max_userip_connections = 40 to protocol imap {}: /etc/dovecot/conf.d/20-imap.conf Added: process_limit = 28000 to service managesieve {}: /etc/dovecot/conf.d/20-managesieve.conf Hope this helps someone. Feedback would be welcome. It would be great if there was a blessed cookbook for Dovecot scaling. At this point it seems a bit like an art form. Now to my two "easy" questions. 1) TCP replication between our two CentOS boxes has been working great, no complaints. However, I realized I did not know how to check the status of replications, as one might want to do if one of the two boxes was taken offline for maintenance or repair. On the surface, it would appear that the command: doveadm replicator status '*' would likely show me what I want to know. However, when I tried it, I got: doveadm(): Fatal: net_connect_unix(/var/run/dovecot/replicator-doveadm) failed: No such file or directory The documentation says that doveadm assumes the socket /var/run/dovecot/replicator-doveadm and the command format provides a "-a" override. In that directory, there is no "replicator-doveadm" socket, but I do see a "replicator" socket. So, should I be using the command: doveadm replicator status -a /var/run/dovecot/replicator '*' or is the non-existence of the replicator-doveadm socket indicative of something I might have done wrong with the config? I hate experimenting more than I have to with a production box. The 2.2.10 Dovecot I am running was installed via yum, so there are no potential compilation issues. 2) It seems logical to me that: dovecot stop would first lock out any new user connections, then do the equivalent of a: doveadm kick "*" before actually cycling everything else down to ensure the shutdown is as graceful as possible. I suppose I could experiment and find out for certain, but I have the sense that the "stop" command is not quite that elegant, so we have implemented procedures to work around it. Just a point of curiosity. An alternative would be if there was a doveadm command to lock out any new user connections, which could then be followed by kick and stop. I have found that many clients are VERY quick to reconnect after a kick.

2 1

Authcache and user changing
by Lazy 13 Apr '15

13 Apr '15

Hi, I have noticed that during auth cache hits usernames are not updated. (We use ldap backend and change username with user_attrs = uid=user, mailMessageStore=home, mailQuotaSize=quota_rule=*:bytes=%$ cold cache lmtp(14414): Debug: auth input: testmon_testmon home=/vmail/te/testmon_testmon quota_rule=*:bytes=104857600 lmtp(14414): Debug: changed username to testmon_testmon lmtp(14414): Debug: Added userdb setting: plugin/quota_rule=*:bytes=104857600 hot cache lmtp(14715): Debug: auth input: iqmon(a)mon.test.pl home=/vmail/iq/testmon_testmon quota_rule=*:bytes=104857600 lmtp(14715): Debug: Added userdb setting: plugin/quota_rule=*:bytes=104857600 this kills our dictionary based quota (users have multiple quota instances depending on timing and alias the email was delivered to. Is there a way to force addition of user to the auth cache ? -- Michal Grzedzicki

3 5

special_use folders
by Roman Gelfand 13 Apr '15

13 Apr '15

My setup is postfix mail gateway/spamassassin on one machine and dovecot mail box server on another machine. Will the following configuration work? 1. On the mail gateway, I install dovecot-lmtp and use it to deliver locally spam. 2. On the mailbox server, I configure special use junk folder to point mail gateway's spam folder via nfs. If this is correct, how can I configure special use folder to point to a path (variable based on email) which is different from default path? If there is a different way to handle this, I would interested. Thanks in advance

3 2

dovecot debug message help required
by Rajesh M 13 Apr '15

13 Apr '15

hi i was carrying out some testing using qmailtoaster with dovecot on a centos 64 server i am connecting to the mailbox using a windows machine with outlook across the lan. the mailbox is around 7gb in size with around 12000 emails spread across multiple folders and i am trying to sync the mailbox folders to by creating an account imap account in outlook. the mails are getting downloaded in the imap folder but the sync does not complete and outlook throws an error. Task 'Synchronizing subscribed folders for user(a)mydomain.com.' reported error (0x800CCC0F) : 'Outlook cannot synchronize subscribed folders for user(a)mydomain.com.. Error: The TCP/IP connection was unexpectedly terminated by the server. If you continue to receive this message, contact your server administrator or Internet service provider (ISP).' in the dovecot log i see the following. Apr 10 17:12:10 imap(user(a)mydomain.com): Debug: Effective uid=89, gid=89, home=/home/vpopmail/domains/mydomain.com/user Apr 10 17:12:10 imap(user(a)mydomain.com): Debug: Quota root: name=ignore=Trash backend=maildir args= Apr 10 17:12:10 imap(user(a)mydomain.com): Debug: Quota rule: root=ignore=Trash mailbox=? bytes=0 messages=0 Apr 10 17:12:10 imap(user(a)mydomain.com): Debug: Quota grace: root=ignore=Trash bytes=0 (10%) Apr 10 17:12:10 imap(user(a)mydomain.com): Debug: Namespace : type=private, prefix=, sep=., inbox=yes, hidden=no, list=yes, subscriptions=yes location= Apr 10 17:12:10 imap(user(a)mydomain.com): Debug: mdbox: access(/home/vpopmail/domains/mydomain.com/user/mdbox, rwx): failed: No such file or directory Apr 10 17:12:10 imap(user(a)mydomain.com): Debug: mdbox: couldn't find root dir Apr 10 17:12:10 imap(user(a)mydomain.com): Debug: sdbox: access(/home/vpopmail/domains/mydomain.com/user/sdbox, rwx): failed: No such file or directory Apr 10 17:12:10 imap(user(a)mydomain.com): Debug: sdbox: couldn't find root dir Apr 10 17:12:10 imap(user(a)mydomain.com): Debug: maildir: root exists (/home/vpopmail/domains/mydomain.com/user/Maildir) Apr 10 17:12:10 imap(user(a)mydomain.com): Debug: maildir++: root=/home/vpopmail/domains/mydomain.com/user/Maildir, index=, indexpvt=, control=, inbox=/home/vpopmail/domains/mydomain.com/user/Maildir, alt= Apr 10 17:12:40 imap(user(a)mydomain.com): Info: Disconnected: Logged out in=28 out=460 i would like to know what the following means -- specifically mdbox and sdbox #################### Apr 10 17:12:10 imap(user(a)mydomain.com): Debug: mdbox: access(/home/vpopmail/domains/mydomain.com/user/mdbox, rwx): failed: No such file or directory Apr 10 17:12:10 imap(user(a)mydomain.com): Debug: mdbox: couldn't find root dir Apr 10 17:12:10 imap(user(a)mydomain.com): Debug: sdbox: access(/home/vpopmail/domains/mydomain.com/user/sdbox, rwx): failed: No such file or directory Apr 10 17:12:10 imap(user(a)mydomain.com): Debug: sdbox: couldn't find root dir #################### my dovecot config file # dovecot -n # 2.2.7: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-431.el6.x86_64 x86_64 CentOS release 6.5 (Final) auth_cache_size = 32 M auth_mechanisms = plain login digest-md5 cram-md5 default_login_user = vpopmail disable_plaintext_auth = no first_valid_gid = 89 first_valid_uid = 89 log_path = /var/log/dovecot.log login_greeting = Dovecot toaster ready. mail_debug = yes mail_max_userip_connections = 50 mail_plugins = " quota" managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace { inbox = yes location = prefix = separator = . type = private } passdb { args = cache_key=%u webmail=127.0.0.1 driver = vpopmail } plugin { quota = maildir:ignore=Trash quota_rule = ?:storage=0 } protocols = imap pop3 service imap-login { client_limit = 1000 process_limit = 400 process_min_avail = 4 service_count = 0 vsz_limit = 512 M } service pop3-login { client_limit = 1000 process_limit = 400 process_min_avail = 12 service_count = 0 vsz_limit = 512 M } ssl_cert = </var/qmail/control/servercert.pem ssl_dh_parameters_length = 2048 ssl_key = </var/qmail/control/servercert.pem userdb { args = cache_key=%u quota_template=quota_rule=*:backend=%q driver = vpopmail } protocol imap { imap_client_workarounds = delay-newmail mail_plugins = " quota imap_quota" } protocol pop3 { pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_fast_size_lookups = yes pop3_lock_session = no pop3_no_flag_updates = yes } thank you, rajesh

2 1

Disabling of userdb/passdb modules using config statements
by Jeroen Massar 13 Apr '15

13 Apr '15

Hola, Debian (and possibly other distros) use the /etc/dovecot/conf.d/* setup where default config files are stuffed and then one can just add a 99-myconfig.conf et voila, variables are overruled. This allows the distro to supply updates to the files at package upgrade time without any/much user intervention. The problem (for me ;) is that the system comes provided with: auth-system.conf.ext containing: passdb { driver = pam } userdb { driver = passwd } Hence pam & /etc/passwd based are always enabled. This while I don't have any local users. Replication seems to then always pick up the local users, which are vmail + nobody (65536). doveadm user '*' thus reports vmail, nobody + virtual users Setting: first_valid_uid = 5000 last_valid_uid = 5000 only keeps vmail in there, but apparently some module (guess replication) is still able to figure out that 'nobody' exists: Apr 10 09:48:25 mail dovecot: doveadm(IPADDR,nobody): Error: Mail access for users with UID 65534 not permitted (see first_valid_uid in config file, uid from userdb lookup). Apr 10 09:48:25 mail dovecot: doveadm(IPADDR,nobody): Error: dsync-server: User init failed Apr 10 09:49:38 mail dovecot: doveadm(nobody): Error: sync: Failed to start remote dsync-server command: Remote exit_code=75 and on the other side: Apr 10 09:54:38 mail dovecot: doveadm(nobody): Error: sync: Unknown user in remote This can be resolved by commenting out the entries in auth-system.conf.ext but then I'll have to do that again at package upgrade time. Hence, would it be a cool option to be able (in the 99-myconfig.conf) file to put: passdb { driver = pam enabled = false } userdb { driver = passwd enabled = false } And thereby disabling those modules completely? Thus avoiding upgrade conflicts etc. Greets, Jeroen

4 7

doveadm save ...
by Hardy Flor 13 Apr '15

13 Apr '15

Hello, when I have with "doveadm save ..." store a message, how do I get the guid or uid of this message for the setthe flags? Hardy

4 8

dovecot-2.2.16 compilation problems under Solaris Studio 11
by Jürgen Obermann 13 Apr '15

13 Apr '15

Hello here are two problems I get when I compile dovecot 2.2.16 under Solaris 10 with Studio 11 Compiler: gmake[4]: Entering directory `/net/fileserv/export/sunsrc/src/dovecot-2.2.16/src/lib' source='test-array.c' object='test_lib-test-array.o' libtool=no \ DEPDIR=.deps depmode=none /bin/bash ../../depcomp \ cc -DHAVE_CONFIG_H -I. -I../.. -I../../src/lib-test -I/opt/local/include -I/usr/local/include -fast -xarch=v8plusa -I/opt/local/include -c -o test_lib-test-array.o `test -f 'test-array.c' || echo './'`test-array.c "test-array.c", line 129: warning: initializer does not fit or is out of range: -32768 "test-array.c", line 129: warning: initializer does not fit or is out of range: -16384 "test-array.c", line 129: warning: initializer does not fit or is out of range: -512 "test-array.c", line 129: warning: initializer does not fit or is out of range: -256 "test-array.c", line 129: warning: initializer does not fit or is out of range: -128 "test-array.c", line 129: warning: initializer does not fit or is out of range: -64 "test-array.c", line 129: warning: initializer does not fit or is out of range: -2 "test-array.c", line 129: warning: initializer does not fit or is out of range: -1 "test-array.c", line 154: operand cannot have void type: op "=" "test-array.c", line 154: assignment type mismatch: unsigned short "=" const void "test-array.c", line 206: operand cannot have void type: op "=" "test-array.c", line 206: assignment type mismatch: pointer to const char "=" const void cc: acomp failed for test-array.c gmake[4]: [test_lib-test-array.o] Fehler 2 (ignoriert) gmake[3]: Entering directory `/net/fileserv/export/sunsrc/src/dovecot-2.2.16/src/lib-imap' source='imap-match.c' object='imap-match.lo' libtool=yes \ DEPDIR=.deps depmode=none /bin/bash ../../depcomp \ /bin/bash ../../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I../.. -I../../src/lib -I../../src/lib-test -I../../src/lib-charset -I../../src/lib-mail -I/opt/local/include -I/usr/local/include -fast -xarch=v8plusa -I/opt/local/include -c -o imap-match.lo imap-match.c libtool: compile: cc -DHAVE_CONFIG_H -I. -I../.. -I../../src/lib -I../../src/lib-test -I../../src/lib-charset -I../../src/lib-mail -I/opt/local/include -I/usr/local/include -fast -xarch=v8plusa -I/opt/local/include -c imap-match.c -KPIC -DPIC -o .libs/imap-match.o "imap-match.c", line 199: identifier redeclared: imap_match_dup current : function(pointer to struct pool {pointer to const struct pool_vfuncs {..} v, unsigned int alloconly_pool :1, unsigned int datastack_pool :1}, pointer to const struct imap_match_glob {pointer to struct pool {..} pool, pointer to struct imap_match_pattern {..} patterns, char sep, array[-1] of char patterns_data}) returning pointer to struct imap_match_glob {pointer to struct pool {..} pool, pointer to struct imap_match_pattern {..} patterns, char sep, array[-1] of char patterns_data} previous: function(pointer to struct pool {pointer to const struct pool_vfuncs {..} v, unsigned int alloconly_pool :1, unsigned int datastack_pool :1}, pointer to const struct imap_match_glob {pointer to struct pool {..} pool, pointer to struct imap_match_pattern {..} patterns, char sep, array[-1] of char patterns_data}) returning pointer to struct imap_match_glob {pointer to struct pool {..} pool, pointer to struct imap_match_pattern {..} patterns, char sep, array[-1] of char patterns_data} : "imap-match.h", line 33 "imap-match.c", line 214: identifier redeclared: imap_match_globs_equal current : function(pointer to const struct imap_match_glob {pointer to struct pool {..} pool, pointer to struct imap_match_pattern {..} patterns, char sep, array[-1] of char patterns_data}, pointer to const struct imap_match_glob {pointer to struct pool {..} pool, pointer to struct imap_match_pattern {..} patterns, char sep, array[-1] of char patterns_data}) returning _Bool previous: function(pointer to const struct imap_match_glob {pointer to struct pool {..} pool, pointer to struct imap_match_pattern {..} patterns, char sep, array[-1] of char patterns_data}, pointer to const struct imap_match_glob {pointer to struct pool {..} pool, pointer to struct imap_match_pattern {..} patterns, char sep, array[-1] of char patterns_data}) returning _Bool : "imap-match.h", line 36 cc: acomp failed for imap-match.c gmake[3]: [imap-match.lo] Fehler 1 (ignoriert) Greetings Jürgen -- Hochschulrechenzentrum der | Mail: Juergen.Obermann(a)hrz.uni-giessen.de Justus-Liebig-Universitaet | WWW: http://www.uni-giessen.de/obermann/ Heinrich-Buff-Ring 44 | Tel: 0641-99-13054 (0641-99-13001) D-35392 Giessen, Germany | Fax: 0641-99-13009

4 4

sieve plugin editheader not found
by Patrick Lion 11 Apr '15

11 Apr '15

Hey folks, ive already made a bug report in the gentoo bugtracker last year. In the meantime after some releases the error persists with the current dovecot and pigeonhole versions. Please see my bug report at gentoo mailinglist: https://bugs.gentoo.org/show_bug.cgi?id=522148 Okay, here are some informations: Steps to Reproduce: add "editheader" to sieve options or "sievec" a file that need the extension if header :matches "Something" "*" { addheader "Anything" "${1}"; deleteheader "Something"; } sievec mod_header.sieve sievec(root): Fatal: Plugin 'editheader' not found from directory /usr/lib64/dovecot/sieve dovecot --version 2.2.16 pigeonhole-0.4.7 sources got downloaded and used in the build process dovecot -n # 2.2.16: /etc/dovecot/dovecot.conf # Pigeonhole version 0.4.7 # OS: Linux 2.6.32-openvz-042stab102.9-amd64 x86_64 Gentoo Base System release 2.2 auth_mechanisms = plain login auth_socket_path = /var/run/dovecot/auth-userdb auth_verbose = yes dict { quota = mysql:/etc/dovecot/dovecot-dict-sql.conf.ext } disable_plaintext_auth = no imap_capability = CAPABILITY IMAP4rev1 LITERAL+ ID ENABLE IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=ORDEREDSUBJECT CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED CONTEXT=SEARCH LIST-STATUS SPECIAL-USE XLIST QUOTA info_log_path = syslog login_log_format_elements = user=<%u> method=%m ip=%r mpid=%e mail_location = maildir:%h/.maildir mail_plugins = quota managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include body enotify environment mailbox date index ihave duplicate imapflags notify namespace compat { alias_for = hidden = yes inbox = no list = no location = prefix = INBOX. separator = . } namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = separator = / } passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { args = /etc/dovecot/dovecot-sql.conf.ext quota = maildir quota_rule2 = trash:storage=+150M quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=80%% quota-warning 80 %u sieve = ~/.dovecot.sieve sieve_dir = ~/sieve sieve_extensions = +notify +imapflags sieve_global_extensions = variables } postmaster_address = mailer-daemon(a)dev.someserver service auth { unix_listener /var/spool/postfix/private/auth { group = mail mode = 0660 user = postfix } unix_listener auth-userdb { group = mail mode = 0660 user = postfix } } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0660 user = postfix } } service quota-warning { executable = script /etc/postfix/quota-warning.sh unix_listener quota-warning { group = hosting mode = 0660 user = postfix } user = postfix } ssl_cert = </etc/ssl/dovecot/server.pem ssl_key = </etc/ssl/dovecot/server.key userdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } protocol lda { mail_plugins = quota sieve postmaster_address = mailer-daemon(a)dev.someserver } protocol imap { mail_plugins = quota imap_quota } protocol pop3 { mail_plugins = quota } protocol lmtp { hostname = dev.someserver mail_plugins = quota sieve postmaster_address = postmaster(a)dev.someserver } Please let me know if you need any additional informations, build logs ( log from 2.213 attached at bugs.gentoo.org ) or whatever may be helpful to track this down.

3 4

Calendar and address book with Dovecot
by mimicafe＠gmail.com 10 Apr '15

10 Apr '15

Hi all I recently install Postfix and Dovecot, and so far so good. My assumption was that calendar and address book (similar to Gmail calendar or address book) are part of Dovecot. However I do not see anything concerning them in any of the docs I have read so far. What other software (ideally open source, free) do I need in other to have Calendar and address book so my users can manage their contact on their phones or computer? I have looked at Roundcube already, but my requirement is not necessarily to provide web mail. Thanks Mimi

15 16

pop3 retr responses too large lines - Fails with current python's poplib
by Guillermo M. Narvaja 10 Apr '15

10 Apr '15

Since December 2014, clients using the Python poplib library (getmail in my case) started to limit the line length of RETR and other command responses sent from the server to 2048 bytes: See https://bugs.python.org/issue16041 (Included at least in Python-2.7.9) Dovecot doesn't have line split in the POP3 module, so Python fails to retrieve messages with long lines. RFC 1939 says: " Responses in the POP3 consist of a status indicator and a keyword possibly followed by additional information. All responses are terminated by a CRLF pair. Responses may be up to 512 characters long, including the terminating CRLF. " I think dovecot-pop3 should split it's output in lines of at least 512 characters. Or at least it should have a "pop3_max_line_length" setting (like "imap_max_line_length"). Server side: # dovecot --version 2.2.13 Client side: # python --version Python 2.7.9 # getmail --version getmail 4.47.0 Temporary workaround (on client-side): --- poplib.py.orig 2015-04-08 18:46:48.280879211 -0300 +++ poplib.py 2015-04-08 18:26:01.288556028 -0300 @@ -36,7 +36,7 @@ # reading arbitrary length lines. RFC 1939 limits POP3 line length to # 512 characters, including CRLF. We have selected 2048 just to be on # the safe side. -_MAXLINE = 2048 +_MAXLINE = 2048*100 class POP3: Thanks in advance. -- Guillermo M. Narvaja Lambda Sistemas S.R.L. www.fierro-soft.com.ar - radiocut.fm Tel: (5411) 3220-1520 (rotativas) y 4857-6662 Cel: (5411) 15-6783-4435 Email: guillermo.narvaja(a)fierro-soft.com.ar MSN: guillermo_narvaja(a)hotmail.com Skype: guillermonarvaja Lavalleja 519 1er Piso - Ciudad de Buenos Aires - Argentina

2 4

FYI: Some 'fun' unlinks with random memory space references
by Jeroen Massar 10 Apr '15

10 Apr '15

Hola, Dovecot: 2.2.16 (6bde7868cffd) That is the rename-it 2:2.2.16-1~auto+43 edition. In the beginning of syncing it caused scary things like: Apr 9 16:24:08 mail dovecot: dsync-server(username): Error: unlink(OX/dbox-Mails/u.10672) failed: No such file or directory Apr 9 16:24:08 mail dovecot: dsync-server(username): Error: unlink(ox/mailboxes/INBOX/dbox-Mails/u.10927) failed: No such file or directory Apr 9 16:24:08 mail dovecot: dsync-server(username): Error: unlink(OX/dbox-Mails/u.10839) failed: No such file or directory Apr 9 16:24:08 mail dovecot: dsync-server(username): Error: unlink(OX/dbox-Mails/u.10656) failed: No such file or directory Apr 9 16:24:08 mail dovecot: dsync-server(username): Error: unlink(11147) failed: No such file or directory Apr 9 16:24:08 mail dovecot: dsync-server(username): Error: unlink(OX/dbox-Mails/u.10637) failed: No such file or directory Apr 9 16:24:08 mail dovecot: dsync-server(username): Error: unlink(OX/dbox-Mails/u.10807) failed: No such file or directory Apr 9 16:24:08 mail dovecot: dsync-server(username): Error: unlink(<80><A5><C8>) failed: No such file or directory Apr 9 16:24:08 mail dovecot: dsync-server(username): Error: unlink(<B0><A6><C8>) failed: No such file or directory Apr 9 16:24:08 mail dovecot: dsync-server(username): Error: unlink(<E0><A7><C8>) failed: No such file or directory Apr 9 16:24:08 mail dovecot: dsync-server(username): Error: unlink(#020<A9><C8>) failed: No such file or directory Apr 9 16:24:08 mail dovecot: dsync-server(username): Error: unlink(@<AA><C8>) failed: No such file or directory Apr 9 16:24:08 mail dovecot: dsync-server(username): Error: unlink(p<AB><C8>) failed: No such file or directory Apr 9 16:24:08 mail dovecot: dsync-server(username): Error: unlink(<A0><AC><C8>) failed: No such file or directory Apr 9 16:24:08 mail dovecot: dsync-server(username): Error: unlink(Э<C8>) failed: No such file or directory Apr 9 16:24:08 mail dovecot: dsync-server(username): Error: unlink() failed: No such file or directory Might want to put a check before that unlink that nothing dirty is in the buffer... I would not be surprised if this was related to a broken index, as the other side effect I saw during this sync was an ever-expanding maildir (read: sdbox), multiplying itself during sync, keeping large amounts of the the .temp.<xxxx> in the dir, never moving them to a final directory. That was resolved by stopping dovecot, then deleting the broken sdbox (backups++) and performing a 'dovecot force-resync -u user Folder' on the source. Maybe there was a race somewhere while syncing the large amount of data over; seems that everything is okay now though. Greets, Jeroen

1 0

sa-learn with remote Dovecot folders
by Andreas Kasenides 10 Apr '15

10 Apr '15

Hi all! The set-up I have is a classic one: 1. one or more Dovecot relay/directors Postfix SMTP servers in DMZ 2. one or more backend IMAP/SMTP servers on the inside network 3. There may or may not be separate incoming or outgoing designated SMTP servers. Now the desired functionality is (of course): 1. relay machines receive messages from outside AND inside 2. relays check for all the bad things (spam, viruses etc). 3. for incoming messages relays check for valid local users and reject messages for invalid users 4. after all checks are done incoming messages are transferred to the backend systems where they are accessed via the Dovecot directors While all the above works nicely, the problem I have is how to train my spamassassin (used by amavisd) on the front ends when all messages are on the back ends. Of course transferring the spam detection procedures internally is not such a great option.Am I missing something? I tried googling for info but nothing substantial turned up. Thanks. -- Andreas Kasenides Senior IT Officer Dept. of Computer Science, University of Cyprus Tel: 22892714, Fax: 22892701 (5B4ANK)

2 4

gmail-migration: archived mails in \ALL
by Peer Heinlein 10 Apr '15

10 Apr '15

Hi, I don't completly understand http://wiki2.dovecot.org/Migration/Gmail I can't find the documentation for the -a and the -F Flag. I'd like to migrate ONLY archived mails from an existing gmail-Account. So I'd have to import all Mails from the \ALL-Folder that does NOT have any virtual folder flags set. I tried to use this command: doveadm -D -o imapc_user=user(a)example.com -o pop3c_user=user(a)exampe.com -o imapc_password=secret -o pop3c_password=secret -o imapc_host=imap.googlemail.com -v backup -m '[Gmail]/Tutti i messaggi' -F '-$GmailHaveLabels' -x \Flagged -x \Junk -x \Trash -x \Important -R -u user(a)example.com imapc: But it looks like it's importing too many mails and not only the archived mails without Flags. How do I have do understand -F '-$GmailHaveLabels ?? Is it "that NOT have $GmailHaveLabels"? And: Is there any better way to address the \ALL-Folder? I can use "-x \All" to exclude that folder, but it looks like I can't use "-m \All" to select that folder. We're a little bit in hurry since Google will stop its service this weekend. Any fast help would be appreciated. Peer -- Heinlein Support GmbH Schwedter Str. 8/9b, 10119 Berlin http://www.heinlein-support.de Tel: 030 / 405051-42 Fax: 030 / 405051-19 Zwangsangaben lt. §35a GmbHG: HRB 93818 B / Amtsgericht Berlin-Charlottenburg, Geschäftsführer: Peer Heinlein -- Sitz: Berlin

2 1

dovecot debug LDAP expansion
by Thomas Baumann 09 Apr '15

09 Apr '15

Hello all, how can LDAP Expansion being debugged? I need to see which LDAP Query is sent to the LDAP server and which Result is sent by the Server. Best regards, Thomas.

2 1