- dovecot - dovecot.org

[Dovecot] Error configuring dovecot instance as proxy
by Balamurugan Ramasamy 10 Mar '14

10 Mar '14

Hi All I follwed the steps in the below url to configure a dovecot proxy instance. http://wiki2.dovecot.org/PasswordDatabase/ExtraFields/Proxy I created a new file '95-test.conf' in /etc/dovecot/conf.d/ location. and put the below lines in that file. proxy=yes host=**** port=143 nopassword=yes However I am getting the following when starting the serice. I tried 'proxy' and 'proxy_maybe' entries, and they both failed. doveconf: Fatal: Error in configuration file /etc/dovecot/conf.d/10-auth.conf line 11: Unknown setting: proxy Could anyone help me how i can resolve this? Thanks Bala

1 0

[Dovecot] mdbox+sis: Error: read(attachments-connector(/path/...)) failed: read(/path/...[base64:18 b/l]) failed: Stream is larger than expected (256088 > 256087, eof=1) (FETCH BODY[] for mailbox INBOX UID 29925)
by Andrew Lewis 10 Mar '14

10 Mar '14

Hi, User's mailbox is failing to sync. Log: Error: read(attachments-connector(/path/storage/m.217)) failed: read(/path/attachments/a5/b0/a5b01f595205522593c27457ea51094872f1f2b42b01e90d27d3f9237bc8a2ab-dbf7460d4778b152ec6e00000d189396[base64:18 b/l]) failed: Stream is larger than expected (256088 > 256087, eof=1) (FETCH BODY[] for mailbox INBOX UID 29925) Sounds like issue here: http://comments.gmane.org/gmane.mail.imap.dovecot/76254 Config attached. Best Regards, Andrew Lewis

1 0

[Dovecot] Slackware 14 config
by Clifford W Fulford 10 Mar '14

10 Mar '14

I am trying to install dovecot 2.2.12 from source on slackware 14.0 Compilation and install work without error. doveconf -n # 2.2.12: /usr/local/etc/dovecot/dovecot.conf # OS: Linux 3.2.45 x86_64 Slackware 14.0 auth_mechanisms = plain login auth_socket_path = /var/run/dovecot/auth-userdb base_dir = /var/run/dovecot/ mail_location = mbox:~/mail:INBOX=/var/spool/mail/%u namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { driver = shadow } protocols = imap lmtp pop3 service imap-login { inet_listener imap { port = 143 } inet_listener imaps { port = 993 ssl = yes } } service pop3-login { inet_listener pop3 { port = 110 } inet_listener pop3s { port = 995 ssl = yes } } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = passwd } Seems to start ok. No errors reported in logs. Checked location of logs with "doveadm log find" telnet localhost 143 Connected to localhost. Escape character is '^]' No imap prompt. Still no errors. Tried doveadm bash-4.2# doveadm auth test fulford Password: doveadm(root): Error: Timeout waiting for handshake from auth server. my pid=8881, input bytes=0 doveadm(root): Fatal: Couldn't connect to auth socket bash-4.2# ls -l /var/run/dovecot/aut* srw------- 1 dovecot root 0 Mar 9 01:01 /var/run/dovecot/auth-client srw------- 1 dovecot root 0 Mar 9 01:01 /var/run/dovecot/auth-login srw------- 1 root root 0 Mar 9 01:01 /var/run/dovecot/auth-master srw-rw-rw- 1 dovecot root 0 Mar 9 01:01 /var/run/dovecot/auth-userdb srw------- 1 dovecot root 0 Mar 9 01:01 /var/run/dovecot/auth-worker I can't find anyone else having this problem. What am I doing wrong? Clifford --

3 4

[Dovecot] Sieve/autosubscribe subfolder
by Moritz Augsburger 09 Mar '14

09 Mar '14

Hi, I just ran across the annoying issue, that with lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes set, parent folders of newly created subfolders get subscribed without being existent. Let me give an example: In sieve I use fileinto "foo/bar"; but "foo/" does not exist as folder. So the Mailbox "foo/bar" gets created, but without "foo/" being a Mailbox. Nevertheless gets "foo/" subscribed, so that I have a non-existing mailbox in my subscription list, what confuses thunderbird. So, to solve this problem, I would propose - either the implicit creation of foo/ as mailbox or - not subscribing foo/ Moritz

2 1

[Dovecot] Mbox corruption - Inbox beginning with 'FFrom' or 'FrFrom'
by Dimos Alevizos 08 Mar '14

08 Mar '14

Hello, we're having some problems with our dovecot setup. I've seen similar problems in the mailing list some years ago but alas wasn't able to find a solution. Our setup is as follows : An MX farm (postfix) sends mails via LMTP to a director farm (dovecot 2.1.12) which proxies pop3/imap/lmtp traffic to a dovecot farm (dovecot 2.1.16). All mailboxes and indexes are on NFS and all servers are Centos. The problem is that at times we see mailboxes (all of them are in mbox format) beginning with FFrom or FrFrom and of course dovecot says it's not a valid mbox file. If we manually remove the offending extra characters from the beginning of the file everything is working again, but often the same user will show the problem again tomorrow. However it's very rare and so far we haven't been able to reproduce the problem. After activating the mail_log plugin hoping it'll help us locate the problem we run across this case : The user (let's call him user(a)domain.gr) logs in via pop3 and deletes some mails but one of them fails: Jun 19 11:09:18 pop01 dovecot: pop3-login: Login: user=<user(a)domain.gr>, method=PLAIN, rip=83.235.173.26, lip=83.235.66.40, mpid=1389, secured, session=<Ao+rWH3fHgBT660a> Jun 19 11:09:18 director5 dovecot: pop3-login: proxy(user(a)domain.gr): started proxying to 83.235.66.40:110: user=<user(a)domain.gr>, method=PLAIN, rip=83.235.173.26, lip=83.235.66.65, session=<Ao+rWH3fHgBT660a> Jun 19 11:09:24 pop01 dovecot: pop3(user(a)domain.gr): expunge: box=INBOX, uid=20670, msgid=<9f5b1a20a9428ed31a9e7e42ce4411f08d0.20130612070424(a)mail84.us2.rsgsv.net>, size=36526 Jun 19 11:09:24 pop01 dovecot: pop3(user(a)domain.gr): expunge: box=INBOX, uid=20671, msgid=<b27d72dc5a47a3235a232494c6fe8aa0(a)newsletter.stockout.gr>, size=4637 Jun 19 11:09:24 pop01 dovecot: pop3(user(a)domain.gr): expunge: box=INBOX, uid=20672, msgid=<1113670779560.1111910791405.1470.2.32032003(a)scheduler.constantcontact.com>, size=38655 Jun 19 11:09:24 pop01 dovecot: pop3(user(a)domain.gr): expunge: box=INBOX, uid=20673, msgid=<83600a274c1407c5aa4c263e2592cb54(a)debop.gr>, size=1181688 Jun 19 11:09:24 pop01 dovecot: pop3(user(a)domain.gr): expunge: box=INBOX, uid=20674, msgid=<F2A59BE7-007A-4567-9BA5-803446C3D7F8(a)bernier-eliades.gr>, size=61116 Jun 19 11:09:26 pop01 dovecot: pop3(user(a)domain.gr): Error: Next message unexpectedly corrupted in mbox file /var/mail/K/Y/V/domain_gr_user_007 at 1 Jun 19 11:09:26 pop01 dovecot: pop3(user(a)domain.gr): Error: Cached message offset 1 is invalid for mbox file /var/mail/K/Y/V/domain_gr_user_007 Jun 19 11:09:27 pop01 dovecot: pop3(user(a)domain.gr): Disconnected: Logged out top=0/0, retr=2/1502843, del=122/359, size=137448432 Jun 19 11:09:27 pop01 dovecot: pop3(user(a)domain.gr): Warning: Our dotlock file /var/mail/K/Y/V/domain_gr_user_007.lock was deleted (locked 9 secs ago, touched 9 secs ago) Jun 19 11:09:27 pop01 dovecot: pop3(user(a)domain.gr): Error: file_dotlock_delete() failed with mbox file /var/mail/K/Y/V/domain_gr_user_007: No such file or directory Jun 19 11:09:27 director5 dovecot: pop3-login: proxy(user(a)domain.gr): disconnecting 83.235.173.26 (Disconnected by server): user=<user(a)domain.gr>, method=PLAIN, rip=83.235.173.26, lip=83.235.66.65, session=<Ao+rWH3fHgBT660a> However he's still able to log in again : Jun 19 11:11:36 pop01 dovecot: pop3-login: Login: user=<user(a)domain.gr>, method=PLAIN, rip=85.74.231.10, lip=83.235.66.40, mpid=10094, secured, session=<QDLrYH3f7ABVSucK> Jun 19 11:11:36 director3 dovecot: pop3-login: proxy(user(a)domain.gr): started proxying to 83.235.66.40:110: user=<user(a)domain.gr>, method=PLAIN, rip=85.74.231.10, lip=83.235.66.63, session=<QDLrYH3f7ABVSucK> Jun 19 11:11:51 pop01 dovecot: pop3(user(a)domain.gr): Disconnected: Logged out top=0/0, retr=0/0, del=0/237, size=75036938 Jun 19 11:11:51 director3 dovecot: pop3-login: proxy(user(a)domain.gr): disconnecting 85.74.231.10 (Disconnected by server): user=<user(a)domain.gr>, method=PLAIN, rip=85.74.231.10, lip=83.235.66.63, session=<QDLrYH3f7ABVSucK> A few minutes later he receives another mail which is delivered with no problem : Jun 19 11:30:39 corvus amavis[546]: (00546-22) Passed CLEAN, [91.190.168.40] [91.190.168.40] <tk-14439(a)free.splio.com> -> <user(a)domain.gr>, Message-ID: <58175-bWFyaW5hQGJlcm5pZXItZWxpYWR lcy5ncg==(a)free.splio.com>, mail_id: J1P-0WpmQksJ, Hits: 1.412, size: 9025, queued_as: 02BA4AE00414, Tests: [DKIM_VALID=-0.1,DKIM_VERIFIED=-0.1,FREEMAIL_FROM=0.001,HTML_IMAGE_RATIO_04=0.61,INVALID_MSGID=1,URIBL_BLOCKED=0.001], autolearn=disabled, 1533 ms Jun 19 11:30:39 corvus smtp/smtpd[1283]: proxy-accept: END-OF-MESSAGE: 250 2.0.0 from MTA(smtp:[127.0.0.1]:10025): 250 2.0.0 Ok: queued as 02BA4AE00414; from=<tk-14439(a)free.splio.com> to=<marina(a)bernier-eliades.gr> proto=ESMTP helo=<poc-pbcs2.splio.com> Jun 19 11:30:39 pop01 dovecot: lmtp(4099, user(a)domain.gr) 77O4IHlGwVEDEAAAYg/qxw: msgid=58175-bWFyaW5hQGJlcm5pZXItZWxpYWRlcy5ncg==(a)free.splio.com: from=residence.suddenly(a)gmx.com size=9610 saved mail to INBOX Jun 19 11:30:39 corvus postfix/lmtp[1350]: 02BA4AE00414: to=<user(a)domain.gr>, relay=lmtp.otenet.gr[62.103.147.209]:24, delay=0.12, delays=0.01/0/0/0.11, dsn=2.0.0, status=sent (250 2.0.0 <user(a)domain.gr> 77O4IHlGwVEDEAAAYg/qxw Saved) And then RIGHT after the successful delivery, the mbox somehow ends up corrupted with an FFrom in the beginning : Jun 19 11:31:27 pop01 dovecot: pop3-login: Login: user=<user(a)domain.gr>, method=PLAIN, rip=83.235.173.26, lip=83.235.66.40, mpid=14630, secured, session=<eBLjp33fUwBT660a> Jun 19 11:31:27 pop01 dovecot: pop3(user(a)domain.gr): Error: Syncing INBOX failed: Mailbox isn't a valid mbox file Jun 19 11:31:27 pop01 dovecot: pop3(user(a)domain.gr): Error: Couldn't init INBOX: Mailbox isn't a valid mbox file Jun 19 11:31:27 pop01 dovecot: pop3(user(a)domain.gr): Mailbox init failed top=0/0, retr=0/0, del=0/0, size=0 Jun 19 11:31:27 director5 dovecot: pop3-login: proxy(user(a)domain.gr): Login failed to 83.235.66.40:110: Mailbox isn't a valid mbox file Jun 19 11:31:27 pop01 dovecot: pop3-login: Login: user=<user(a)domain.gr>, method=PLAIN, rip=83.235.173.26, lip=83.235.66.40, mpid=14642, secured, session=<eBLjp33fUwBT660a> Jun 19 11:31:27 pop01 dovecot: pop3(user(a)domain.gr): Error: Syncing INBOX failed: Mailbox isn't a valid mbox file Jun 19 11:31:27 pop01 dovecot: pop3(user(a)domain.gr): Error: Couldn't init INBOX: Mailbox isn't a valid mbox file Jun 19 11:31:27 pop01 dovecot: pop3(user(a)domain.gr): Mailbox init failed top=0/0, retr=0/0, del=0/0, size=0 Jun 19 11:31:27 director5 dovecot: pop3-login: proxy(user(a)domain.gr): Login failed to 83.235.66.40:110: Mailbox isn't a valid mbox file Jun 19 11:31:27 director5 dovecot: pop3-login: Aborted login (proxy dest auth failed): user=<user(a)domain.gr>, method=PLAIN, rip=83.235.173.26, lip=83.235.66.65, session=<eBLjp33fUwBT660a Our config : # 2.1.16: /opt/dovecot-2.1.16/etc/dovecot/dovecot.conf # OS: Linux 2.6.18-92.1.22.el5 x86_64 CentOS release 5.9 (Final) auth_cache_negative_ttl = 10 mins auth_cache_size = 5 M auth_cache_ttl = 10 mins auth_verbose = yes default_client_limit = 5000 default_process_limit = 500 deliver_log_format = msgid=%m: from=%f size=%p %$ dict { sqlquota = mysql:/opt/dovecot/etc/dovecot/dovecot-dict-sql.conf.ext } disable_plaintext_auth = no first_valid_uid = 20 lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes listen = * log_timestamp = "%Y-%m-%d %H:%M:%S " login_greeting = ready login_trusted_networks = 83.235.66.0/24 mail_access_groups = mail disk root mail_fsync = always mail_nfs_index = yes mail_nfs_storage = yes mail_plugins = quota managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave imapflags notify mbox_lock_timeout = 3 secs mbox_read_locks = dotlock fcntl mmap_disable = yes passdb { args = /opt/dovecot/etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename flag_change append mail_log_fields = uid box msgid size quota = dict:User quota::noenforcing:proxy::sqlquota sieve = ~/.sieve sieve_dir = ~/sieve sieve_extensions = +notify +imapflags } postmaster_address = postmaster(a)otenet.gr quota_full_tempfail = yes service auth-worker { user = dovenull } service dict { unix_listener dict { group = mail mode = 0666 } } service imap-login { inet_listener imap { port = 143 } inet_listener imaps { port = 993 ssl = yes } } service lmtp { client_limit = 1 inet_listener lmtp { port = 24 } } service pop3-login { inet_listener pop3 { port = 110 } inet_listener pop3s { port = 995 ssl = yes } } service quota-warning { executable = script /opt/dovecot/etc/dovecot/quota-warning.sh user = dovecot } ssl = no userdb { args = /opt/dovecot/etc/dovecot/dovecot-ldap.conf.ext driver = ldap } verbose_proctitle = yes protocol lmtp { mail_plugins = quota sieve quota } protocol lda { mail_plugins = quota sieve quota } protocol imap { imap_client_workarounds = delay-newmail tb-extra-mailbox-sep mail_max_userip_connections = 100 mail_plugins = quota imap_quota quota notify mail_log } protocol pop3 { mail_max_userip_connections = 100 mail_plugins = quota quota mail_log notify pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_fast_size_lookups = yes pop3_lock_session = yes pop3_reuse_xuidl = yes pop3_uidl_format = %08Xu%08Xv } Thank you for your time. Dimos Alevizos

4 10

[Dovecot] Planning migration
by Alan Chandler 08 Mar '14

08 Mar '14

I think I have a working dovecot installation, and the time has come to migrate my users. There are only 4 of us, so it can be done manually per user. I looked at this page in the wiki http://wiki2.dovecot.org/Migration/Dsync but I am totally confused. 1st off, it uses doveadm, but with commands parameters that dont match my doveadm's man page. In fact they look more like dsync parameters. Is there an error, or am I totally misunderstanding 2nd - if I assume its a dsync set of parameters, the imapc: at the end is a specification of location2. However, again my man page doesn't give any explanation of this. I am wondering, is this an example of an proxy 3rd - where do the imapc_* parameters go in the configuration I can't find any reference to them in the wiki

2 1

[Dovecot] BUG: segmentation fault in auth
by Vesa Muhonen 08 Mar '14

08 Mar '14

Hi I'm getting segmentation fault in Dovecot 2.2.11. This happens when trying to do a user lookup by "doveadm user". The machine is running Arch Linux on i686 on ext3. dovecot -n (I took this when running the previous version that works) # 2.2.9: /etc/dovecot/dovecot.conf # OS: Linux 3.12.9-x86-linode56 i686 auth_cache_size = 32 k default_client_limit = 500 default_process_limit = 50 default_vsz_limit = 128 M log_timestamp = "%Y-%m-%d %H:%M:%S " mail_gid = vmail mail_location = sdbox:~/sdbox mail_privileged_group = mail mail_uid = vmail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace inbox { inbox = yes location = mailbox Archive { auto = create special_use = \Archive } mailbox Drafts { auto = create special_use = \Drafts } mailbox Junk { auto = create special_use = \Junk } mailbox Sent { auto = create special_use = \Sent } mailbox Trash { auto = create special_use = \Trash } prefix = separator = / subscriptions = yes type = private } passdb { args = /etc/dovecot/deny-users deny = yes driver = passwd-file } passdb { args = /etc/dovecot/master-users driver = passwd-file master = yes pass = yes } passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve sieve_max_script_size = 1M sieve_quota_max_scripts = 10 sieve_quota_max_storage = 10M } postmaster_address = postmaster@<domain> protocols = imap lmtp sieve service auth-worker { user = $default_internal_user } service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-userdb { group = vmail mode = 0600 user = vmail } user = $default_internal_user } service imap-login { inet_listener imap { port = 143 } process_min_avail = 1 service_count = 1 vsz_limit = 64 M } service imap { process_limit = 256 } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0600 user = postfix } user = vmail } service managesieve-login { inet_listener sieve { port = 4190 } service_count = 1 vsz_limit = 64 M } service managesieve { process_limit = 128 } ssl = required ssl_ca = </etc/ssl/myCA/certs/ca.cert ssl_cert = </etc/ssl/myCA/certs/imap.cert ssl_key = </etc/ssl/myCA/private/imap.key userdb { args = uid=vmail gid=vmail home=/var/vmail/%d/%n driver = static } protocol lda { mail_plugins = " sieve" } protocol imap { mail_max_userip_connections = 30 } protocol lmtp { mail_plugins = " sieve" postmaster_address = postmaster@<domain> } This is the error I get: # doveadm user ... doveadm(root): Error: userdb lookup(...): Disconnected unexpectedly field value This appears in logs: Mar 08 00:18:40 kernel: auth[15182]: segfault at 4 ip 0805dbbd sp bfd87ec0 error 4 in auth[8048000+4b000] Mar 08 00:18:40 dovecot[15177]: auth: Fatal: master: service(auth): child 15182 killed with signal 11 (core dumped) Mar 08 00:18:40 systemd-coredump[15227]: Process 15182 (auth) dumped core. And the coredump (if I got it out correctly) # systemd-coredumpctl gdb 15182 TIME PID UID GID SIG EXE Sat 2014-03-08 00:18:40 CET 15182 76 76 11 /usr/lib/dovecot/auth Reading symbols from /usr/lib/dovecot/auth...(no debugging symbols found)...done. [New LWP 15182] Core was generated by `dovecot/auth'. Program terminated with signal SIGSEGV, Segmentation fault. #0 0x0805dbbd in auth_fields_exists () I'm no expert in debugging, but do tell if you need more info. -vesa

1 0

[Dovecot] unsebscribe
by Aziz KNINA 07 Mar '14

07 Mar '14

*unsebscribe*

2 1

[Dovecot] How to run a program with mail_filter plugin
by Stanislas SABATIER 07 Mar '14

07 Mar '14

Hi, I'm using mail_filter plugin but I don't want it to launch a script but a program I wrote instead. In 10-master, if I put the absolute path to my program in the plugin settings ie : (…) service mail-filter { executable = /usr/local/bin/mail/my_email_filter (…) But I've got the following error from Dovecot : dovecot: master: Error: service(mail-filter): Initial status notification not received in 30 seconds, killing the process h ow do I need to configure the service to launch my program ? Thanks, Regards, Stan. --------------------------------------------------------------- Stanislas SABATIER s.sabatier(a)pobox.com ---------------------------------------------------------------

1 0

[Dovecot] no sieve with lmtp_save_to_detail_mailbox=yes
by Dennis Kuhn 06 Mar '14

06 Mar '14

i have a problem with sieve and lmtp_save_to_detail_mailbox = yes. If the mailbox "detail" exists everything works fine, but if the mailbox detail does not exist then sieve does not work. The .dovecot.sieve.log file says sieve: info: started log at Mar 06 14:28:47. error: msgid=<531877EE.7070806(a)heinlein-support.de>: failed to store into mailbox 'test2': Mailbox doesn't exist: test2. I think this is the reason why no sieve script is executed, but why is sieve here involved? Is there any relation between lmtp_save_to_detail_mailbox=yes and sieve or is this a bug? The same sieve file works with the same mailaddress without mailextension, so the sieve script is not the reason for the failure. I am using dovecot version 2.2.12 Dennis Kuhn -- Heinlein Support GmbH Schwedter Str. 8/9b, 10119 Berlin http://www.heinlein-support.de Tel: 030 / 405051-57 Fax: 030 / 405051-19 Zwangsangaben lt. §35a GmbHG: HRB 93818 B / Amtsgericht Berlin-Charlottenburg, Geschäftsführer: Peer Heinlein -- Sitz: Berlin

2 1

[Dovecot] Public Namespace and INBOX
by Dieter Knopf 06 Mar '14

06 Mar '14

Hello, i added a existing MAILDIR as a Public Namespace and i can subscribe to this Namespace without a problem. I can access every folder except the INBOX. Thunderbird just shows a GREY "INBOX". Is there any way to access the INBOX of a maildir? Thanks Dieter Knopf

4 6

[Dovecot] Still no emails since Feb. 6
by Steve Campbell 06 Mar '14

06 Mar '14

I checked my settings on the dovecot mailman page, and although my account was set to "disable" email, after changing it and attempting to have the list resend my password, I'm still not seeing emails. The last time I received emails, the outgoing server for the list was sent from the IP 193.210.130.67. Is that still correct? I've checked my logs to see if there's anything blocked, and I don't see anything. I've checked my access file and firewall, and nothing is blocked there. I'm not sure why my account settings showed "disabled", but it sounds like email was either bounced back to the list or my server is in some type of outgoing list to prevent sending to me. I'm at a loss. Is there any way an admin can check for me, please, to see if there's a problem they might spot? Thanks, steve

4 6

[Dovecot] Pigeonhole Sieve Extprograms Plugin
by dovecot＠voidptr.de 06 Mar '14

06 Mar '14

Hi, I upgraded to Dovecot 2.2.9 from Debian's wheezy-backports today (which should contain the "sieve_extprograms" plugin and thus also the vnd.dovecot.{pipe,filter,execute} capabilities. However when I add require "vnd.dovecot.filter"; to my sieve script via managesieve, the server reports error: require command: unknown Sieve capability: 'vnd.dovecot.filter' What am I missing and what should I do to get pipe/filter/execute to work? postconf -n attached. Nils

2 2

[Dovecot] whole user mailbox read only
by Francesco 06 Mar '14

06 Mar '14

Hello, i was browsing the dovecot wiki for some documentation related to the use of ACLs but i couldn't find an answer. i'm in the need to prevent users from deleting emails, yet being able to add new content via imap, what i mean is that a user should be able to create an email in its mailbox (maildir actually is used), but once the email is there the user shouldn't be able to delete it. do you know if there is a way to accomplish this for each subfolder on a Maildir environment? Thanks in advance Francesco

1 0

[Dovecot] Bounce messages
by Thanh Long DANG 06 Mar '14

06 Mar '14

Hi, I just set up my mail server using postfix / dovecot / mysql and it works well. I just have a problem : I'm a trying to have a overquota notification and the server sends nothing (mail server rejects incoming mail). Could you tell me if there is a problem with dovecot or postfix configuration? Kind regards,Long My conf : # 2.1.7: /etc/dovecot/dovecot.conf# OS: Linux 2.6.32-26-pve x86_64 Debian 7.2 simfsauth_mechanisms = plain logindebug_log_path = /var/log/dovecot-debug.logdict { quotadict = mysql:/etc/dovecot/dovecot-dict-sql.conf}disable_plaintext_auth = noinfo_log_path = /var/log/dovecot-info.loglog_path = /var/log/dovecot.logmail_location = maildir:/home/vmail/%d/%n:INDEX=/home/vmail/%d/%n/indexesnamespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix =}passdb { args = /etc/dovecot/dovecot-mysql.conf.ext driver = sql}plugin { quota = maildir:User quota quota_exceeded_message = Storage quota for this account has been exceeded, please try again later. quota_rule = *:storage=1G quota_rule2 = Trash:storage=+30%% quota_rule3 = Sent:storage=+30%% quota_warning = storage=90%% quota-warning 90 %u quota_warning2 = storage=75%% quota-warning 75 %u sieve = ~/.dovecot.sieve sieve_dir = ~/sieve}postmaster_address = postmaster(a)multidist.euprotocols = " imap lmtp pop3"quota_full_tempfail = yesrejection_subject = Rejet: %sservice auth { unix_listener /var/spool/postfix/private/auth { mode = 0666 }}service dict { unix_listener dict { mode = 0777 }}service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0666 user = postfix }}service quota-warning { executable = script /usr/local/bin/quota-warning.sh unix_listener quota-warning { mode = 0777 }}ssl_cert = </etc/dovecot/dovecot.pemssl_key = </etc/dovecot/private/dovecot.pemuserdb { args = /etc/dovecot/dovecot-mysql.conf.ext driver = sql}verbose_proctitle = yesprotocol lmtp { mail_plugins = " quota"}protocol lda { info_log_path = /var/log/dovecot-lda.log log_path = /var/log/dovecot-lda-errors.log mail_plugins = " quota"}protocol imap { mail_max_userip_connections = 10 mail_plugins = quota imap_quota}protocol pop3 { mail_plugins = quota pop3_uidl_format = %08Xu%08Xv}

3 3

[Dovecot] Shared Namespace and correct location
by Dieter Knopf 05 Mar '14

05 Mar '14

Hello again, i still have problems using a Shared Namespace in my configuration. I'm using Dovecot 2.2.9. mail_location = maildir:/home/vmail/%d/%n/MAILDIR:INDEX=/home/vmail/%d/%n/INDEX/ namespace inbox { type = private separator = / prefix = inbox = yes } This works create. But: namespace { type = shared separator = / prefix = shared/%%u/ location = maildir:/home/vmail/%%d/%%u/MAILDIR/shared:INDEX=/home/vmail/%d/%u/INDEXS/%%u subscriptions = no list = children } I'm still not sure how i can see a shared mailbox on a different account. I can add ACL rules and dovecot is adding SQL-Entries to the user-shares table. The dovecot-acl-list file is created too, hope this is okay (vfile + SQL) But i can't see the shared folder on the target account. I tried many location-pathes, but not sure how i can add the right folder. There must be a problem with %%d and %%u. Thank you very much, Dieter

2 1

[Dovecot] Dovecot Migration: Retrieving/Logging POP/IMAP Passwords in Plaintext
by Traiano Welcome 05 Mar '14

05 Mar '14

Hi List I'm currently in the process of migrating my dovecot imap/pop users to a new server and have to extract their passwords in order to import them into the new system (different password encryption schemes). I've tried enabling auth_* debug parameters in my dovecot.conf in the hope that this would result in logging plaintext passwords to the dovecot log. However dovecot does not log the passwords in plaintext under any debugging configuration. My question: Is there any other configuration of dovecot that would allow me to capture POP/IMAP passwords at a successful login time? Dovecot version: 1.0.7 (from dovecot-1.0.7-7.el5_7.1 rpm) The output of dovecot -n is: --- # 1.0.7: /etc/dovecot.conf info_log_path: /var/log/dovecot.debug verbose_ssl: yes login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login mail_location: mbox:~:INBOX=~/Mailbox mail_debug: yes mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/lib64/dovecot/imap mail_plugin_dir(imap): /usr/lib64/dovecot/imap mail_plugin_dir(pop3): /usr/lib64/dovecot/pop3 auth default: mechanisms: plain login verbose: yes debug: yes debug_passwords: yes passdb: driver: pam userdb: driver: passwd socket: type: listen client: path: /var/run/dovecot/auth-client mode: 438 --- My dovecot.conf is as follows: ------ info_log_path = /var/log/dovecot.debug verbose_ssl = yes mail_location = mbox:~:INBOX=~/Mailbox mail_debug = yes protocol imap { } protocol pop3 { } protocol lda { postmaster_address = postmaster(a)example.com } auth_verbose = yes auth_debug = yes auth_debug_passwords = yes auth default { mechanisms = plain login passdb pam { } userdb passwd { } user = root socket listen { client { path = /var/run/dovecot/auth-client mode = 0666 } } } dict { } plugin { } --- Many thanks in advance! Traiano

3 5

[Dovecot] Using AD, one more try - "successfol auth" and crashing auth process
by Jeroen Scheerder 05 Mar '14

05 Mar '14

Hi, I have no success in using AD with dovecot. The little checkpassword script I cooked up that uses ldapsearch to lookup a user DN (with an authenticated bind) and then ldapsearch with an authenticated bind for that DN again works well. * Approach 1: use a service account to bind to AD, lookup the user DN, and bind to that DN. It fails. The LDAP config looks like: hosts = dc2.office.on2it.net ldap_version = 3 base = dc=office,dc=on2it,dc=net scope=subtree auth_bind = yes dn = CN=DovecotSvc,OU=Svcs,DC=office,DC=on2it,DC=net dnpass = suppressed pass_attrs = sAMAccountName=user pass_filter = (&(objectClass=person)(sAMAccountName=%u)) user_attrs = sAMAccountName=user user_filter = (&(objectClass=person)(sAMAccountName=%u)) What happens in this case is best shown in the packet capture as displayed by tshark: $ tshark -o tcp.check_checksum:FALSE -tr -r dc2.pcap 1 0.000000 172.17.50.13 -> 172.17.10.2 LDAP 197 bindRequest(7) "CN=DovecotSvc,OU=Svcs,DC=office,DC=on2it,DC=net" simple 2 0.001879 172.17.10.2 -> 172.17.50.13 LDAP 88 bindResponse(7) success Yay! The service account binds just fine. 3 0.001967 172.17.50.13 -> 172.17.10.2 LDAP 180 searchRequest(8) "dc=office,dc=on2it,dc=net" wholeSubtree 4 0.002772 172.17.10.2 -> 172.17.50.13 LDAP 502 searchResEntry(8) "CN=Jeroen Scheerder,OU=Users,DC=office,DC=on2it,DC=net" \ | searchResRef(8) | searchResRef(8) | searchResRef(8) | searchResDone(8) success 5 0.098367 172.17.50.13 -> 172.17.10.2 TCP 66 49416 > 389 [ACK] Seq=246 Ack=459 Win=1037 Len=0 TSval=602425599 TSecr=124473537 Yay! The user DN is found successfully. 6 225.149885 172.17.50.13 -> 172.17.10.2 LDAP 166 bindRequest(12) "CN=Jeroen Scheerder,OU=Users,DC=office,DC=on2it,DC=net" simple 7 225.152323 172.17.10.2 -> 172.17.50.13 LDAP 88 bindResponse(12) success 8 225.248387 172.17.50.13 -> 172.17.10.2 TCP 66 49416 > 389 [ACK] Seq=346 Ack=481 Win=1040 Len=0 TSval=602650749 TSecr=124496053 Yay! The user DN bind works. But wait, why is it taking dovecot 225 seconds to get around to trying it? The auth process has already given up. * Approach 2: A template defines the user DN. Bind to that DN. AD DNs don't contain usernames, but AD allows all kinds of non-LDAP shorthands for DNs, inclusing %user%@domain. I've verified this to work using ldapsearch: $ ldapsearch -o ldif-wrap=no -x -LLL -E pr=200/noprompt -H ldap://dc2.office.on2it.net \ -b dc=office,dc=on2it,dc=net -s sub \ -D js(a)office.on2it.net -W \ '(&(ObjectClass=person)(sAMAccountName=js))' DN Enter LDAP Password: dn: CN=Jeroen Scheerder,DC=office,DC=on2it,DC=net The config looks like: hosts = dc2.office.on2it.net ldap_version = 3 base = dc=office,dc=on2it,dc=net scope=subtree auth_bind = yes auth_bind_userdn = "%u(a)office.on2it.net" pass_attrs = sAMAccountName=user user_attrs = sAMAccountName=user What happens in this case is best shown by a snippet of dovecot logging: Mar 5 09:57:36 <mail.err> ponyboy dovecot: auth: Error: ldap(js,127.0.0.1,<z1dLNtjzJwB/AAAB>): ldap_search(base=dc=office,dc=on2it,dc=net filter=(&(objectClass=posixAccount)(uid=js))) failed: Operations error Mar 5 09:57:36 <mail.err> ponyboy dovecot: imap: Error: Disconnected from auth server, aborting (client-pid=7247 client-id=1) Mar 5 09:57:36 <mail.crit> ponyboy dovecot: auth: Fatal: master: service(auth): child 7245 killed with signal 11 (core not dumped - set service auth { drop_priv_before_exec=yes }) Mar 5 09:57:36 <mail.info> ponyboy dovecot: imap-login: Internal login failure (pid=7247 id=1) (internal failure, 1 successful auths): user=<js>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=7248, secured, session=<z1dLNtjzJwB/AAAB> I find this intriguing -- "1 successful auths", so says imap-login, with auth dying horribly. I smell a rat. Something's wrong here...

1 0

[Dovecot] Send and Bounced mail not appearing, depending on mail client
by Dominique 05 Mar '14

05 Mar '14

Hi, I just installed Dovecot2 on Ubuntu 12.04 server with postfix and postfixadmin. I am using virtual users and virutal domains. When using Thunderbird, Roundcubemail,iOS mail application on an iPad2 or Kmail n Android, all mail sent and bounce shows up. However, when using vTigerCRM to send mails, nothing shows up - anywhere. I know the mail are being send - as per the mail.log and the various postfix log lines. But none of that is being captured by Dovecot... What am I missing? Thanks for any hints you can provide. Dominique --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com

2 1

Re: [Dovecot] Can't get authentication for masterusers on Mac OS X Server 10.6.8
by Joseph Tam 05 Mar '14

05 Mar '14

On Tue, 4 Mar 2014, dovecot-request(a)dovecot.org wrote: > #telnet mailserv.example.com 143 > Connected to mailserv.example.com. > Escape character is '^]'. > * OK Dovecot ready. > 1 login myusername myPassword > 1 OK Logged in. > 1 logout > * BYE Logging out > 1 OK Logout completed. > Connection closed by foreign host. This does not test what you want, which is trying to authenticate the master user, not the regular user. From what I remember of your config, you have another passdb which holds the credentials of your master user: you need to check that file to make sure the master user's password (hash) matches what you think the master password ought to be. Joseph Tam <jtam.home(a)gmail.com>

1 0

[Dovecot] Hidden virtual folder
by Moritz Augsburger 04 Mar '14

04 Mar '14

Hi, I wanted to create a virtual folder containing all unread messages and the threads they belong to, and this config works really fine: > dovecot.conf: namespace { type = private prefix = virtual/ separator = / location = virtual:~/Maildir/virtual:INDEX=MEMORY list = children subscriptions = no } > virtual/All/dovecot-virtual: * -Trash -Trash/* -Junk -Junk/* -Drafts -Drafts/* -virtual -virtual/* all > virtual/New/dovecot-virtual: virtual/All inthread refs or unseen recent The only problem I got is that scanning all files for the virtual/All mailbox takes too long, and I would like to keep them cached (no INDEX=MEMORY), so I thought I'll just put virtual/All inside a second virtual namespace. As it's a bad idea to open the All directory manually, I could also hide the complete namespace to the user. So I added the following to my config: namespace { type = private prefix = virtual-all/ separator = / location = virtual:~/Maildir/virtual-all/ hidden = yes list = no subscriptions = no } But sadly it didn't work, a directory virtual-all/ pops up inside my client (thunderbird/icedove). Is hidden=yes/list=no unsupported for virtual locations, or is it me misconfiguring dovecot? If it should matter, it's version 2.2.9, or more specific debian 1:2.2.9-1~bpo70+1. Thanks Moritz

1 0

[Dovecot] No email since Feb 6
by Steve Campbell 04 Mar '14

04 Mar '14

Is the list down or have I been blocked.

2 1

[Dovecot] cyrus2dovecot and doveadm search,expunge
by Lanore Ronan 04 Mar '14

04 Mar '14

hi list, i'am doing a migration from cyrus ( 2.1.17 ) to dovecot ( 2.1.7). for mailbox migration i'am using this script : http://cyrus2dovecot.sw.fu-berlin.de/ To migrate a mailbox : /usr/local/sbin/cyrus2dovecot.pl -C /data/migration/spool/%h/user/%u -D /data/mail/foo.bar/%u(a)foo.bar -U /data/migration/flags/%h/%u.sub -S /data/migration/flags/%h/%u.seen test Directories /data/migration/spool /data/migration/flags are rsynced with rsync -av --delete ... .... .... After mailbox end to migrate, i want to search all message savedbefore some days but this don't work doveadm search -u test(a)foo.bar mailbox inbox savedbefore 1d i'm sure this mailbox have mail before this days. ls into mailbox dir: -rw-r--r-- 1 siadmin siadmin 21662 Mar 3 15:54 1393858496.R2cdf6e55Q2902.server.foo.bar,S=21662,W=22160:2,a I don't understand why this message isn't printer by savedbefore 1d what i'm doing wrong thanks -- Ronan Lanore

1 0

[Dovecot] IMAP native METADATA already implemented?
by Aleve Sicofante 04 Mar '14

04 Mar '14

A year ago, more or less, I was told "Dovecot is getting close to having native METADATA support." How's this going? Thanks.

3 2

[Dovecot] Error "Initializing mail storage ..." after upgrading to 2.2.10
by Götz Reinicke - IT Koordinator 04 Mar '14

04 Mar '14

Hi, I did the upgrade frpom 1.2.x to 2.2.10 and had some warnings/errors on a very few accounts/mailboxes. All of them where permission related and solved. Dovecot rocks again. But on one mailbox I do get an error: Error: user rechnnugseingang-animationsinstitut: Initialization failed: Initializing mail storage from mail_location setting failed Error: Invalid user settings. Refer to server log for more information. There is a homedirectory and the permissions are set like on all other accounts. The username is quite long (35 characters) but an other one with 34 is working fine. And before the upgrade there was no error. Thnaks for any help or hint. Regards . Götz -- Götz Reinicke IT-Koordinator Tel. +49 7141 969 82 420 E-Mail goetz.reinicke(a)filmakademie.de Filmakademie Baden-Württemberg GmbH Akademiehof 10 71638 Ludwigsburg www.filmakademie.de Eintragung Amtsgericht Stuttgart HRB 205016 Vorsitzender des Aufsichtsrats: Jürgen Walter MdL Staatssekretär im Ministerium für Wissenschaft, Forschung und Kunst Baden-Württemberg Geschäftsführer: Prof. Thomas Schadt

5 11