- dovecot - dovecot.org

[Dovecot] doveadm user -f index
by Micah Anderson 04 Apr '12

04 Apr '12

I've configured my mail_location to have a different location for performance reasons so they aren't in the same location as the mail_location. The 'doveadm user -f home' is useful to find where a user's home directory is for various scripting purposes, but I can't seem to find a way to determine the location of the user's indexes. I can do something with the output of dovecot -a to find the mail_location and then look for a configured INDEX, but then I don't have a good way of translating the %d/%1n/%n type string formatters into their values for a user. thanks for any suggestions! micah --

2 1

[Dovecot] Dovecot and scalable database storage
by list＠airstreamcomm.net 04 Apr '12

04 Apr '12

I saw some interesting mails from TImo back in 2009 talking about the idea of using something like Cassandra db or similar as a storage platform for both email and index/logs. I was wondering if this has been discussed since then, and if there are any plans to support something like this in the future? I have been playing with Cassandra and found that their RackAwareStrategy gives you the ability to replicate writes to as many nodes as you would like, but more importantly what nodes and one of those nodes could be defined by what rack it lives in or what data center it lives in. This means multiple sites high available storage clusters, seemingly a system that dovecot could benefit from in terms of performance and redundancy and simplicity. Any takers?

2 1

[Dovecot] ldap userdb warning in v2.1.1
by Nikolaos Milas 04 Apr '12

04 Apr '12

Hi, I've upgraded from 2.0.13 to 2.1.1 and when I started the service, I got the following warning: Mar 21 10:07:23 imapserver dovecot: master: Dovecot v2.1.1 starting up (core dumps disabled) Mar 21 10:08:17 imapserverdovecot: auth: Warning: ldap: Ignoring changed user_attrs in /etc/dovecot/dovecot-passdb-ldap.conf, because userdb ldap not used. (If this is intentional, set userdb_warning_disable=yes) I didn't see such warnings in 2.0.13. I guess I should/could remove the "user_attrs" line from dovecot-passdb-ldap.conf because it's not needed? (I could also set "userdb_warning_disable=yes" as advised, but I'm trying to figure out what's the real cause of the warning.) The config follows below. Thanks, Nick ============================================================= protocols = imap pop3 mail_location = maildir:~/Maildir/ mail_gid = 502 mail_uid = 502 auth_mechanisms = plain login auth_username_format = %Lu auth_verbose = yes disable_plaintext_auth = no mail_plugins = quota protocol imap { imap_client_workarounds = "delay-newmail " mail_plugins = quota imap_quota } protocol pop3 { mail_max_userip_connections = 3 mail_plugins = quota pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_uidl_format = %08Xu%08Xv } protocol lda { auth_socket_path = /var/run/dovecot/auth-master info_log_path = log_path = mail_plugins = quota postmaster_address = sysadmin(a)example.com sendmail_path = /usr/lib/sendmail } userdb { args = /etc/dovecot/dovecot-usrdb-ldap.conf driver = ldap } passdb { args = /etc/dovecot/dovecot-passdb-ldap.conf driver = ldap } plugin { quota = maildir:User quota quota_rule = *:storage=4G quota_rule2 = Trash:storage=+3%% quota_warning = storage=75%% quota-warning 75 %u quota_warning2 = storage=90%% quota-warning 90 %u } service quota-warning { executable = script /opt/mail1.sh user = vmail unix_listener quota-warning { user = vmail } } service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-master { group = vmail mode = 0660 user = vmail } user = root } service imap-login { service_count = 1 vsz_limit = 64 M } service pop3-login { service_count = 1 vsz_limit = 64 M } ssl_ca = </etc/pki/tls/certs/chain-650.pem ssl_cert = </etc/pki/tls/certs/cert-650.pem ssl_key = </etc/pki/tls/private/key-650.pem syslog_facility = local1 ============================================================= and dovecot-usrdb-ldap.conf is identical to dovecot-passdb-ldap.conf: ============================================================= hosts = localhost tls = no base = ou=people, dc=example, dc=com scope = onelevel ldap_version = 3 dn = uid=authenticate,ou=System,dc=example,dc=com dnpass = secret auth_bind = yes user_filter = (uid=%u) pass_filter = (uid=%u) pass_attrs = uid=user,userPassword=password auth_bind_userdn = uid=%u,ou=people,dc=example,dc=com user_attrs = roomNumber=quota_rule=*:bytes=%$,uid=home=/home/vmail/%u iterate_filter = (objectClass=*) =============================================================

2 2

[Dovecot] dovecot 2.0.19 Panic: file mail-index-sync-ext.c: line 209 (sync_ext_reorder): assertion failed: (offset < (uint16_t)-1)
by Jim Lawson 04 Apr '12

04 Apr '12

Had a user who couldn't access his INBOX: > Mar 21 09:21:17 penguina dovecot: imap([USER]): Panic: file > mail-index-sync-ext.c: line 209 (sync_ext_reorder): assertion fai > led: (offset < (uint16_t)-1) > Mar 21 09:21:17 penguina dovecot: imap([USER]): Error: Raw backtrace: > /usr/lib/dovecot/libdovecot.so.0 [0x342683c660] -> /usr > /lib/dovecot/libdovecot.so.0 [0x342683c6b6] -> > /usr/lib/dovecot/libdovecot.so.0 [0x342683bb73] -> > /usr/lib/dovecot/libdovecot > -storage.so.0 [0x3426c966a8] -> > /usr/lib/dovecot/libdovecot-storage.so.0(mail_index_sync_ext_intro+0x240) > [0x3426c979c0] -> / > usr/lib/dovecot/libdovecot-storage.so.0(mail_index_sync_record+0x401) > [0x3426c99151] -> /usr/lib/dovecot/libdovecot-storage.s > o.0(mail_index_sync_map+0x245) [0x3426c99c55] -> > /usr/lib/dovecot/libdovecot-storage.so.0(mail_index_map+0x71b) > [0x3426c8afbb > ] -> /usr/lib/dovecot/libdovecot-storage.so.0 [0x3426c85d8b] -> > /usr/lib/dovecot/libdovecot-storage.so.0(mail_index_open+0x1c > e) [0x3426c8617e] -> > /usr/lib/dovecot/libdovecot-storage.so.0(index_storage_mailbox_open+0xb5) > [0x3426c4d865] -> /usr/lib/dov > ecot/libdovecot-storage.so.0 [0x3426c75eab] -> > /usr/lib/dovecot/libdovecot-storage.so.0 [0x3426c31006] -> > dovecot/imap [hdtod > d 10.245.30.58 SELECT](cmd_ Stack trace made it look like it was the INBOX, so I deleted the index files for his INBOX and everything was OK. doveconf -n: > # OS: Linux 2.6.18-274.18.1.el5 x86_64 Red Hat Enterprise Linux Server > release 5.8 (Tikanga) > auth_gssapi_hostname = penguina.uvm.edu > auth_krb5_keytab = /etc/krb5.keytab.dovecot > auth_master_user_separator = * > auth_mechanisms = plain login gssapi > base_dir = /var/run/dovecot/ > default_process_limit = 250 > first_valid_uid = 50 > lock_method = flock > login_trusted_networks = [REDACTED] > mail_location = mbox:~/mail:INBOX=/var/spool/mail/%1u/%1.1u/%u > mail_max_lock_timeout = 30 secs > mail_max_userip_connections = 100 > mbox_read_locks = flock > mbox_write_locks = flock > mmap_disable = yes > namespace { > inbox = yes > location = > prefix = > separator = / > type = private > } > namespace { > hidden = yes > list = no > location = > prefix = mail/ > separator = / > type = private > } > namespace { > hidden = yes > list = no > location = > prefix = ~/mail/ > separator = / > type = private > } > namespace { > hidden = yes > list = no > location = > prefix = ~%u/mail/ > separator = / > type = private > } > passdb { > args = /etc/dovecot/passwd.masterusers > driver = passwd-file > master = yes > } > passdb { > driver = pam > } > service imap { > process_limit = 4096 > } > service lmtp { > client_limit = 1 > inet_listener lmtp { > port = 24 > } > } > ssl_cert = <[REDACTED] > ssl_key = < [REDACTED] > userdb { > driver = passwd > } > verbose_proctitle = yes Any questions/suggestions welcome. Jim

2 3

[Dovecot] dovecot-auth restaring and caching
by Angel L. Mateo 04 Apr '12

04 Apr '12

Hello, I'm trying to configure dovecot (2.0.13) to cache user and pass dbs. This a mail server whose purpose is only to deliver messages through dovecot lda. My users are in a ldap server. So I have configure auth_cache_size (with 20MB) and auth_cache_ttl (with 1 day). I have checked that caching is being done, and it is. If a send a message to a user, dovecot looks for it in my ldap server. If then I send another, then it uses cache information. The problem I'm having is that if I have no activity in the server, dovecot stops its auth process and when another message is received, it restarted it, but with an empty cache. This is the auth log for the first message: Mar 22 10:29:41 lynx10 dovecot: auth: Debug: Loading modules from directory: /usr/lib/dovecot/modules/auth Mar 22 10:29:41 lynx10 dovecot: auth: Debug: Module loaded: /usr/lib/dovecot/modules/auth/libauthdb_ldap.so Mar 22 10:29:41 lynx10 dovecot: auth: Debug: master in: USER#0111#011amateo#011service=lda Mar 22 10:29:41 lynx10 dovecot: auth: Debug: prefetch(amateo): passdb didn't return userdb entries, trying the next userdb Mar 22 10:29:41 lynx10 dovecot: auth: Debug: userdb-cache(amateo): miss Mar 22 10:29:41 lynx10 dovecot: auth: Debug: ldap(amateo): user search: <search base and filter> fields=irisMailbox,homeDirectory,uidNumber,gidNumber Mar 22 10:29:41 lynx10 dovecot: auth: Debug: ldap(amateo): result: uidNumber(uid)=XXXXX gidNumber(gid)=XXX homeDirectory(home)=XXXXXXXXXX Mar 22 10:29:41 lynx10 dovecot: auth: Debug: master out: USER#0111#011amateo#011uid=XXXXXX#011gid=XXX#011home=XXXXXXXXXXXX And this is the second one, just after a few minutes: Mar 22 10:41:03 lynx10 dovecot: auth: Debug: Loading modules from directory: /usr/lib/dovecot/modules/auth Mar 22 10:41:03 lynx10 dovecot: auth: Debug: Module loaded: /usr/lib/dovecot/modules/auth/libauthdb_ldap.so Mar 22 10:41:03 lynx10 dovecot: auth: Debug: master in: USER#0111#011amateo#011service=lda Mar 22 10:41:03 lynx10 dovecot: auth: Debug: prefetch(amateo): passdb didn't return userdb entries, trying the next userdb Mar 22 10:41:03 lynx10 dovecot: auth: Debug: userdb-cache(amateo): miss Mar 22 10:41:03 lynx10 dovecot: auth: Debug: ldap(amateo): user search: <search base and filter> fields=irisMailbox,homeDirectory,uidNumber,gidNumber Mar 22 10:41:03 lynx10 dovecot: auth: Debug: ldap(amateo): result: uidNumber(uid)=XXXXX gidNumber(gid)=XXX homeDirectory(home)=XXXXXXXXXXX Mar 22 10:41:03 lynx10 dovecot: auth: Debug: master out: USER#0111#011amateo#011uid=XXXXX#011gid=XXX#011home=XXXXXXXXXX This is my configuration: root@lynx10:/etc/dovecot/conf.d# doveconf -n # 2.0.13: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-4-amd64 x86_64 Ubuntu 10.04.4 LTS auth_cache_size = 20 M auth_cache_ttl = 1 days auth_debug = yes auth_verbose = yes hostname = lynx10 passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve sieve_extensions = +imapflags sieve_max_redirects = 15 } postmaster_address = postmaster(a)um.es protocols = " imap lmtp pop3" service auth { unix_listener auth-userdb { mode = 0666 } } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = prefetch } userdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } protocol lmtp { mail_plugins = " sieve" } protocol lda { mail_plugins = " sieve" } Any idea? -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información _o) y las Comunicaciones Aplicadas (ATICA) / \\ http://www.um.es/atica _(___V Tfo: 868887590 Fax: 868888337

2 3

[Dovecot] File/folder permission issues in 2.1.3
by Christian Rößner 04 Apr '12

04 Apr '12

Hi, I figured out that Dovecot does not honer secondary groups with auth/auth-worker (??), if doing LDAP/TLS stuff. I had to use file system acls to add the user "vmail" to /etc/ssl/private and to the corresponding key file: doveconf -n # 2.1.3: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-40-generic-pae i686 Ubuntu 10.04.4 LTS auth_master_user_separator = * auth_mechanisms = plain login auth_verbose = yes hostname = mail.roessner-net.de lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes mail_access_groups = vmail mail_gid = vmail mail_location = mdbox:~/mdbox mail_plugins = autocreate quota acl fts fts_solr zlib mail_log notify mail_privileged_group = mail mail_uid = vmail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace { list = children location = mdbox:%%h/mdbox prefix = shared/%%u/ separator = / subscriptions = no type = shared } namespace inbox { inbox = yes location = mailbox "Deleted Messages" { special_use = \Trash } mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } mailbox junkmail { special_use = \Junk } prefix = separator = / type = private } passdb { args = /etc/dovecot/master-users driver = passwd-file master = yes pass = yes } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { acl = vfile acl_shared_dict = file:/var/mail/virtual/shared-mailboxes.db autocreate = Trash autocreate2 = Sent autocreate3 = Drafts autocreate4 = junkmail autosubscribe = Trash autosubscribe2 = Sent autosubscribe3 = Drafts autosubscribe4 = junkmail fts = solr fts_solr = break-imap-search url=http://localhost:8080/solr/ mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename mail_log_fields = uid box msgid size quota = dict:User quota::file:%h/mdbox/dovecot-quota quota_rule = *:storage=300M:messages=20000 quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=80%% quota-warning 80 %u sieve = ~/.dovecot.sieve sieve_dir = ~/sieve zlib_save = gz zlib_save_level = 6 } protocols = imap pop3 lmtp sieve service auth-worker { unix_listener auth-worker { user = vmail } user = vmail } service auth { unix_listener auth-userdb { mode = 0600 user = vmail } user = vmail } service dict { unix_listener dict { mode = 0600 user = vmail } } service lmtp { inet_listener lmtp { address = ::1 port = 24 } } service quota-warning { executable = script /usr/local/bin/quota-warning.sh unix_listener quota-warning { user = vmail } user = dovecot } ssl_ca = </ca/psw_net/SSL123_CA_Bundle.pem ssl_cert = </ca/psw_net/mail_roessner-net_de.crt ssl_key = </ca/psw_net/mail_roessner-net_de.key userdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } verbose_proctitle = yes protocol lmtp { mail_plugins = autocreate quota acl fts fts_solr zlib mail_log notify sieve } protocol imap { imap_client_workarounds = tb-extra-mailbox-sep tb-lsub-flags mail_max_userip_connections = 50 mail_plugins = autocreate quota acl fts fts_solr zlib mail_log notify imap_quota imap_acl imap_zlib } Normally, mail is placed under /var/mail/virtual as user vmail, group vmail. Is there something wrong with my config that prevents switching to secondary groups? /etc/dovecot/dovecot-ldap.conf.ext: uris = ldap://ldap0.roessner-net.de/ ldap://db.roessner-net.de/ sasl_bind = yes sasl_mech = EXTERNAL tls = yes tls_ca_cert_file = /etc/ssl/certs/ca-certificates.crt tls_cert_file = /etc/ssl/certs/mx0.roessner-net.de.pem tls_key_file = /etc/ssl/private/mx0.roessner-net.de.key.pem tls_require_cert = hard base = ou=people,ou=it,dc=roessner-net,dc=de user_attrs = rnsMSQuota=quota_rule=*:storage=%$,rnsMSMailboxHome=home user_filter = (&(objectClass=rnsMSDovecotAccount)(rnsMSRecipientAddress=%u)) pass_attrs = rnsMSDeliverToAddress=user,userPassword=password pass_filter = (&(objectClass=rnsMSDovecotAccount)(rnsMSRecipientAddress=%u)(rnsMSEnableDovecot=TRUE)) iterate_attrs = rnsMSDovecotUser=user iterate_filter = (objectClass=rnsMSDovecotAccount) default_pass_scheme = CRYPT Thanks in advance. -Christian --- Roessner-Network-Solutions Bachelor of Science Informatik Nahrungsberg 81, 35390 Gießen F: +49 641 5879091, M: +49 176 93118939 USt-IdNr.: DE225643613 http://www.roessner-network-solutions.com

2 1

Re: [Dovecot] Many messages clustered around the same date.saved value
by Joseph Tam 04 Apr '12

04 Apr '12

Timo Sirainen <tss(a)iki.fi> wrote: >>> Which mailbox format? With Maildir the date.saved is taken from >>> dovecot.index.cache file, and in some cases that might get dropped. If >>> it does, then it fallbacks to using the file's ctime. >> >> mbox. > > Ah, with mbox there isn't any usable fallback for date.saved. If it's > not in dovecot.index.cache, the current time is used. I'm a little confused as to why it needed a fallback. In other words, why wasn't date.saved put into the index as soon as the IMAP operation copied it into "Trash"? If this data isn't set at that time, when does it get instantiated? When I actually ask for it? Joseph Tam <jtam.home(a)gmail.com>

2 1

[Dovecot] Is it possible to migrating mail to dovecot using imapc?
by Dr Josef Karthauser 04 Apr '12

04 Apr '12

I'm excited to hear that dovecot now supports imap as a mailbox type. I've got a mailbox over on another imap server, which I want to migrate to dovecot. I was wondering whether I could use 'doveadm backup' to setup a two way synchronisation process between the old imap mailbox and the new dovecot mailbox. That way I can do the migration, and can coordinate the mail clients changing where they pick up their email from later. But, I can't find much documentation on imapc, other than it exists. Is this kind of move possible now? Would someone mind giving me some hints as to how to make it work please? Thanks :), Joe

2 9

[Dovecot] dovecot 2.1 breaks FTS + pre-auth?
by dm-list-email-dovecot＠scs.stanford.edu 04 Apr '12

04 Apr '12

Hi. I use dovecot in the simplest possible way, as an IMAP server in pre-auth mode over ssh or just locally over a unix-domain socket (e.g., with offlineimap, which runs much faster using dovecot for the local message store). Ideally I would like to avoid running any extra daemons or setting up anything as root. Until recently, this has worked fine by just setting the CONFIG_FILE environment variable to something in my home directory. Here is my configuration: $ export CONFIG_FILE=$HOME/etc/dovecot.conf $ dovecot -n # 2.1.3: /home/dm/etc/dovecot.conf # OS: Linux 3.2.13-1-ARCH x86_64 mail_location = maildir:~/Mail/inbox mail_plugins = " fts fts_squat" plugin { fts = squat fts_squat = partial=4 full=10 } doveconf: Error: ssl enabled, but ssl_cert not set doveconf: Fatal: Error in configuration file /home/dm/etc/dovecot.conf: ssl enabled, but ssl_cert not set Full text search used to work just fine with this configuration, and still does on a machine I have running dovecot 2.0.13. However, on the machine with 2.1, I get errors about /var/run/dovecot/index not existing. $ printf "a select INBOX\nb search text xyzzy\nc logout\n" \ | /usr/lib/dovecot/imap * PREAUTH [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS MULTIAPPEND UNSELECT CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS SPECIAL-USE] Logged in as dm imap(dm): Error: net_connect_unix(/var/run/dovecot/indexer) failed: No such file or directory ... Needless to say, no dovecot.index.search or dovecot.index.search.uids file is created after this error. While I can't write /var/run/dovecot, this is not a permission issue. For example, adding base_dir=/home/dm (my home directory) to the configuration file yields the same error for /home/dm/indexer. I'm guessing something has changed where imap requires an indexer daemon and doesn't launch it in pre-auth mode any more, but I can't find anything about this in the documentation. In short, if anyone can tell me how to use FTS in conjunction with pre-auth mode or point me to a working example, I would appreciate it.

2 1

[Dovecot] 2.1.3: doveadm mailbox delete lost the -s option
by Micah Anderson 04 Apr '12

04 Apr '12

Looks like the recently added -s (for unsubscribing) option to doveadm mailbox delete went missing: root@vireo# /usr/bin/doveadm mailbox delete -u micahtest -s restored delete: invalid option -- 's' doveadm mailbox delete [-u <user>|-A] [-S <socket_path>] [-s] <mailbox> [...] although the option still is shown as valid :) micah --

2 1

[Dovecot] Dovecot stones
by Timo Sirainen 03 Apr '12

03 Apr '12

For the last few days I've been thinking about my company and what it really should do, and as much as the current plan seems reasonable, I think in good conscience I really can't help but to bring up an alternative plan: The support for Dovecot is quite good already, but wouldn't it be better if it was GUARANTEED that your email server was ALWAYS working with zero downtime or other problems? After some thinking, planning and consulting with my spiritual guides I realized I really should just go ahead and do it: From now on you can buy blessed Dovecot stones (http://www.dovecot.org/tmp/stone1.jpg) which are guaranteed to keep your email server running. I don't think there's really any further reason for me to provide commercial support. Probably the whole Dovecot mailing list will be pretty much useless after this as well, so I might as well stop posting there. If you have any problems, you'll just buy a Dovecot stone and the problem will go away. If for any reason that doesn't work, it means that your problem is more difficult than most and you need to buy a few more stones. Please remember that each shipment may take up to 3 weeks to reach you, so get your stones early and in sufficient quantities. A small email server will be happy enough with a single small Dovecot stone, but the more users you have the more stones you'll likely need. This is because most people are rather unhappy with their lives, and they project their negative energies towards their surroundings, including their email servers. To overcome this negative energy you need to have a counterbalancing positive energy, which the Dovecot stones will provide you. The Dovecot stones are hand painted from the finest materials available to the sister of the author of Dovecot that she could find in the local shops. Each stone contains such love and dedication towards the well being of Dovecot that you will shed tears when you lay your eyes upon their physical being. The images provided here unfortunately don't do justice to them. http://www.dovecot.org/tmp/stone2.jpg - This is how i keep my home desktop running all day every day. I have NEVER broken a single hard drive in my life. I don't even bother to keep backups, because I KNOW it is useless for me. A small Dovecot stone can be bought for 10 euros, a medium sized stone for 100 euros and a large stone for 500 euros. Each large stone can usually handle around 1000-2000 users before you need to buy more. If you have millions of users we'll need to find you a larger rock from my parents' backyard. There are only a limited number of such rocks available (we disposed of most of them to our neighbors' yards years ago), so their prices need to be negotiated in advance.

12 12

[Dovecot] Mail migration troubles
by Spyros Tsiolis 03 Apr '12

03 Apr '12

Hello all, OK, I would really appreciate your help on this. I managed to do a pretty straight-forward and flawless migration on dovecot from one domain to another. However, I have this nagging problem with most of the thunderbird MTAs. When I try to delete some "test" messages I sent to make sure that everything works, it comes back with the following message on the bottom of the Thunderbird window : "The current operation on InBox did not succeed. The mail server for account "Account(a)bloomingdomain.gr" responded [TRYCREATE] mailbox doesn't exist : Trash" Now, I know it has to do something with automatically creating a trash folder. But don't know anything more. Could someone shed some light on this ? Dovecot v1.2.15 AFAIK CentOS 5.5 x86 (32-bit) other stuff On Clients : Thunderbird v11.0.1 (XP Pro / 32-bit) s. ---- "I merely function as a channel that filters music through the chaos of noise" - Vangelis

3 4

[Dovecot] imapdir still a configuration option?
by Kurt Mosiejczuk 03 Apr '12

03 Apr '12

I've been looking at moving an old IMAPdir-based solution to dovecot. I came across references that dovecot (to my pleasant surprise) added imapdir support in 1.1. However, in trying 2.0.13 (from an OpenBSD package) things start okay, but I see in the logs: "Initialization failed: Initializing mail storage from mail_location setting failed: Unknown mail storage driver imapdir" Poking around in the sources, I still see lots of references to imapdir, but see very little in the documentation. Is IMAPdir still supported in 2.0.x (or even 2.1.x)? I'd prefer not to have to migrate users via renaming, especially since they like the IMAPdir layout for their own searching. --Kurt

2 2

[Dovecot] Connection queue full on dovecot 2.0.13
by Giovanni Mancuso 03 Apr '12

03 Apr '12

Hi, i have a problem with dovecot 2.0.13. I have one dovecot in Front-end that has only: passdb { driver = static args = proxy=y host=10.0.0.6 nopassword=y } In Back-end i have one dovecot that does auth and exports imap/pop3 ports. In dovecot's log of Front-end i see: /Apr 02 14:33:34 imap-login: Info: proxy(//user(a)example.com/ <mailto:amministrazionevendite@pec.gmatica.it>/): started proxying to 10.0.0.6:143: user=<//user(a)example.com/ <mailto:amministrazionevendite@pec.gmatica.it>/>, method=PLAIN, rip=//xx.xx.xx.xx//, lip=xx.xx.xx.xx, TLS Apr 02 14:34:36 imap-login: Info: Disconnected: *Connection queue full *(auth failed, 1 attempts): user=<//user(a)example.com/ <mailto:amministrazionevendite@pec.gmatica.it>/>, method=PLAIN, rip=//xx.xx.xx.xx//, lip=//xx.xx.xx.xx//, TLS/ I see this wiki page: http://wiki2.dovecot.org/LoginProcess but i read: It works by using a number of long running login processes, each handling a number of connections. This loses much of the security benefits of the login process design, because in case of a security hole (in Dovecot or SSL library) the attacker is now able to see other users logging in and steal their passwords, read their mails, etc. Is there another way? Thanks

2 1

[Dovecot] Per-user flags/indexes for shared mailboxes
by Timo Sirainen 03 Apr '12

03 Apr '12

The attached patch adds support for doing e.g.: namespace { type = public prefix = Public/ location = mdbox:/var/lib/public/mdbox:INDEXPVT=~/mdbox/public list = yes } So the private flags are stored in indexes under ~/mdbox/public/, while the shared flags are stored under /var/lib/public/mdbox/. The patch currently hardcodes the shared flags as only MAIL_SEEN. I'm not really sure what would be the best place to configure which flags are private. Perhaps a per-namespace default, but how to configure it per-mailbox? Also per-user keywords aren't currently supported. And it's a little bit annoying that each private flag update must increase the shared modseq for the message, but that can't really be helped. (Alternative would be for each user to have their own private modseqs, which could get difficult.) I'll probably commit this to v2.1 after some more testing.

1 0

[Dovecot] dsync redesign
by Timo Sirainen 03 Apr '12

03 Apr '12

In case anyone is interested in reading (and maybe helping!) with a dsync redesign that's intended to fix all of its current problems, here are some possibly incoherent ramblings about it: http://dovecot.org/tmp/dsync-redesign.txt and even if you don't understand that, here's another document disguising as an algorithm class problem :) If anyone has thoughts on how to solve it, would be great: http://dovecot.org/tmp/dsync-redesign-problem.txt It only deals with saving new messages, not expunges/flag changes/etc, but those should be much simpler.

9 17

[Dovecot] Dovecot 1.2.9. next_uid was lowered
by Müller Lukas 03 Apr '12

03 Apr '12

Hi There A while ago I posted here about a crash of dovecot, that had to do with nfs and was quite certainly due to bad luck. But still one problem persists: We have a Mailbox, that is accessed from multiple users using IMAP. Occasionally all the Emails in the mailbox seem to be missing, when accessing the Mailbox through IMAP, although they're still there on the server. This seems to happen, if the users are accessing the Mailbox on Server1 and at the same time an email gets delivered to the mailbox on server2. Since it happens quite seldom, there must be other conditions or circumstances that have to be met for the problem to occur. Unfortunately I don't know which. Shortly after the mail gets delivered on server2, I get the following errors on server1: mail01 dovecot: IMAP(akzidenz(a)triner.ch): fdatasync(/data/vmail/example.com/user/dovecot-uidlist) failed: Input/output error mail01 dovecot: IMAP(akzidenz(a)triner.ch): /data/vmail/example.com/user/dovecot-uidlist: next_uid was lowered (2143 -> 2142, hdr=2142) The new mail is than missing in the uidlist and as long as no new mail arrives all folders of the mailbox appear to be empty. If a new mail arrives, it will get the uid that should have been given to the pervious mail (the one that caused the error). The previous mail still won't be listed in the uidlist, but everything works as expected. Best regards Lukas Müller Systems Engineer _______________________________________________ NEWMEDIA Südostschweiz Newmedia AG http://www.newmedia.ch<http://www.newmedia.ch/> _______________________________________________ TYPO3 & Drupal - Wir wissen wie. Ihre professionelle Web Agentur in Chur, Ilanz, Glarus und Zürich.

2 1

[Dovecot] setting up ldap for sasl
by jeff donovan 03 Apr '12

03 Apr '12

Greetings im new to the list dovecot --version 2.0.13 ubuntu 11.10 i want to use dovecot to authenticate my ldap users. My local users can authenticate and send email. Using postfix sasl/tls dovecot pam. I have read many docs/tutorials, which all have a plethora of options and information. my file structure is different than most of the documentation. I have ../etc/dovecot.conf which points to. !include_try /usr/share/dovecot/protocols.d/*.protocol !include conf.d/*.conf !include_try local.conf which leads me to /etc/dovecot/conf.d, which is full of config files. All were traditionally located in dovecot.conf in previous versions. im using PAM to authenticate my local system users. I have read that could adjust PAM, to use LDAP. How do I configure dovecot to keep using pam for local users and ldap for remote ? Do i just add the passdb lines dovecot.conf: passdb ldap { args = /etc/dovecot-ldap.conf } userdb prefetch { } # The userdb below is used only by deliver. userdb ldap { args = /etc/dovecot-ldap.conf } dovecot-ldap.conf: pass_attrs = uid=user,userPassword=password, homeDirectory=userdb_home,uidNumber=userdb_uid,gidNumber=userdb_gid # For deliver: user_attrs = homeDirectory=home,uidNumber=uid,gidNumber=gid any assistance would be helpful. -j

1 2

[Dovecot] Dsync automation
by Jitendra Bhaskar 03 Apr '12

03 Apr '12

Hi, I am using dovecot-2.1.3 on centos 5.7. Its running fine. I have two systems for mail server one is for backup. Currently I am running rsync daily. But I want to use dsync. I went through all the http://wiki2.dovecot.org/Tools/Dsync and http://blog.dovecot.org/2012/02/dovecot-clustering-with-dsync-based.htmlbut I couldn't understood how to automatize dsync. Can anybody give me any idea ho to do it ? -- * Thanks & Regards * *Jitendra Kumar Bhaskar* Cell:- +91 7306311531 +91 8102997821

2 1

Re: [Dovecot] Mail migration troubles
by Spyros Tsiolis 02 Apr '12

02 Apr '12

I have a suspicion that, as usual, no one is going to answer my message. Because of the fact that this is a call for help and no-one ever bothers, I 'll just have to re-phrase my question : Here's what I found on the dovecot wiki : imapsync Here's an example of how to run imapsync for a single user: imapsync --syncinternaldates \ --host1 192.168.1.57 --authmech1 LOGIN --user1 leah(a)example.com --password1 secret \ --host2 127.0.0.1 --authmech2 LOGIN --user2 leah(a)example.com --password2 secret It is quite easy to script this for a number of users, assuming you have their passwords. Even if you do not, imapsync also supports logging in as an admin user that has the ability to copy message for sub users, and a variety of other authentication options. Is the above what I need if I migrate mailboxes FROM dovecot TO dovecot ? E.g. in my example, I only copy mailboxes from an old "user(a)domainA.gr" to "user(a)domainB.gr". Is the above all I need ? Is there a native dovecot tool for this or should I just use imapsync ? Thank you again, s. ---- "I merely function as a channel that filters music through the chaos of noise" - Vangelis ----- Original Message ----- > From: Spyros Tsiolis <stsiol(a)yahoo.co.uk> > To: Spyros Tsiolis <stsiol(a)yahoo.co.uk> > Cc: > Sent: Monday, 2 April 2012, 11:24 > Subject: Re: [Dovecot] Mail migration troubles > > Hello again, > > Well, it seems I have trouble with the migration after all. > After the migration and eventhough all folders and messages > are on their respective places, any new mail users get > inside their mailbox cannot be dragged-and-dropped to > their respective folders. > > So, if a user has a folder with my name on it and I send > him an e-mail, the user will try to drag-and-drop that > message to the folder with my name, but the message won't > move. > > Any gurus out there on this ? > Any help would be greatly appreciated. > > spyros > > > > ---- > "I merely function as a channel that filters > music through the chaos of noise" > - Vangelis >

4 9

[Dovecot] strike my last
by Spyros Tsiolis 02 Apr '12

02 Apr '12

strike my last, looks like its a thunderbird issue Apologies... s. ---- "I merely function as a channel that filters music through the chaos of noise" - Vangelis

1 0

[Dovecot] Problem compiling dovecot-antispam on Ubuntu 11.10 using Doveot 2.0.13
by Guillaume Hilt 31 Mar '12

31 Mar '12

Hello, Last dovecot available version on Ubuntu 11.10 AMD64 is dovecot 2.0.13. dovecot-antispam package is compiled for dovecot 2.0.15. So, i'm trying to compile a new dovecot antispam plugin. I followed dovecot wiki but i'm running into this error : Successfully compiled dspam.c (plugin). mailbox.c: In function 'antispam_save_begin': mailbox.c:138:12: error: 'struct mail_save_context' has no member named 'copying_via_save' mailbox.c: In function 'antispam_save_finish': mailbox.c:174:12: error: 'struct mail_save_context' has no member named 'copying_via_save' Failed to compile mailbox.c (plugin)! Any hint please ? Regards, -- Guillaume Hilt

2 2

[Dovecot] Problem managing mbox
by PSTM 31 Mar '12

31 Mar '12

Hello, I have a problem with dovecot. seems that do not erase mail that mail client request to be erased. And I have this errors: > Error: Next message unexpectedly corrupted in mbox file Info: > dovecot-2.1.1-2.0.cf.fc16.i686 > root 5979 0.0 0.1 3208 1260 ? Ss 20:18 0:00 > /usr/sbin/dovecot -F > dovenull 5985 0.0 0.2 7060 2280 ? S 20:18 0:00 > dovecot/imap-login > vmail 5988 0.0 0.1 7888 1848 ? S 20:18 0:00 > dovecot/imap permissions on mail dir: > total 4 > drwxr-xr-x 9 vmail mail 4096 ene 21 21:43 vmail Any suggestion? Regards, -- -- http://www.0pc.eu/

3 2

[Dovecot] Proxying Authentication on both sides
by Andy Dills 30 Mar '12

30 Mar '12

I've recently set up a director proxy environment on my test servers, with the intention of deploying on our cluster soon. One thing I found confusing in the proxying documentation [1] was the first bit about their being two ways to do the authentication...either you have the proxy forward the auth to the real server for authentication, or you have the proxy authenticate it and then login to the real server with a master password. Well, we use /bin/checkpassword authentication which hooks into a variety of subsytems for various specific customer needs, and sometimes we need to know the username AND password of the user in order to determine their home directory information. So, using a master password (which requires the back-end server not getting the user password) is out. However, when we have the front-end server do a static director proxy, the problem is that authentication failures are logged on the back-end server with a source IP of the proxy, and no authentication failure with the client IP address is logged on the proxy. So, fail2ban (which is a MUST these days, at least for us) will not be able to properly filter out the brute force attackers. My solution was an alternative: I authenticate with our /bin/checkpassword on the proxy, which authenticates the user and only at that point returns the proxy=y nopassword=y switch to proxy the connection and forward the authentication. As a result, we get logs on the proxy for failed attempts, and the full username and password is supplied to the back-end server for proper processing. Food for thought in case anybody else is implementing this. Thanks, Andy [1] http://wiki2.dovecot.org/PasswordDatabase/ExtraFields/Proxy --- Andy Dills Xecunet, Inc. www.xecu.net 301-682-9972 ---

2 3

[Dovecot] Multiple instances
by Timo Sirainen 30 Mar '12

30 Mar '12

v2.1 now saves the base_dir and instance_name to /var/lib/dovecot/instances when starting up. If you have for example two instances with names "backend" and "proxy", you can then use: doveadm -i proxy proxy list instead of something like: doveadm -c /etc/dovecot-proxy/dovecot.conf proxy list The same -i parameter works for all dovecot programs. I also added a couple of new doveadm commands: # doveadm instance list path name last used running /var/run/dovecot proxy 2012-02-06 21:41:39 yes # doveadm instance remove proxy It would be possible to add commands to start/shutdown some/all instances using doveadm, but is it all that useful? I'd guess people would have their own init.d scripts anyway doing that. Anything else that could be useful related to this?

2 2