- dovecot - dovecot.org

[Dovecot] Imap/pop gateway
by nuno marques 03 Nov '11

03 Nov '11

Hello, How can i make a imap/pop gateway? that is, putting the mailboxes on a server on the internal network and put the gateway in the dmz. regards

2 1

[Dovecot] Thunderbird slow in talking with dovecot IMAP AND to sendmail
by Linda Walsh 03 Nov '11

03 Nov '11

I'm trying to find out what's causing this slowdown -- it's INTOLERABLE.... over 1 minute and less than 1% done. (400MB file)... After trying 3 times, I gave up and logged in using X to the server and ran Tbird from there.... Mail sent out in < 1 minute, though the copy to dovecot took about 50% longer. So... I looked at the network trace. and everyfrackin' body was using 4K packet sizes (at the application level!, the window size on TCP was over 64K...but no one was using it)....especially galling with my network's MTU at 9K, BTW, because small packets are really bad on a 1Gb network. sendmail -- 4K, dovecot /ssl, 4K... wazzup .. is t-bird forcing this, or is there some ssl requirement? but it can't just be ssl -- as it's talking to sendmail on port 25 unencrypted (it's a local net anyway)... I could see the entire binary going out in text form... 1 line at a time...a "C" line in sendmail, with lens of 4096...is that some max? I don't see it in the sendmail.cf files...wanted to see if anyone knew of dovecot restrictions that might limit packets to 4k, before I lamblasted the thunderbird people for another act of mindless stupidity (the first being when they decided to cache all your IMAP store on every local client in the client's ROAMING profile...*brilliant*!!!... sides, if I wanted it on local I would have set 'store on local', but in TB3, they know better and change that for me... Something about them being too stupid to use indexing and searching on an imap server? Maybe I just imagined hearing that...

3 3

Re: [Dovecot] doveadm delete-user ?
by Joseph Tam 03 Nov '11

03 Nov '11

Jan-Frode Myklebust writes: > IMHO it would be great if we could both provision and un-provision users > without having the provisioning system mess with files in the > filesystem. Provisioning new users works fine since dovecot will create > all files/directories on first login, but I haven?t found the tools to > un-provison them. > I see "doveadm mailbox delete" can delete individual > mailboxes, but what about indexes, sieve-scripts and home-directories? > Are there any tools to clean out these ? I coundn't find any, so I wrote my own executable cron job that scans the index cache and checks if the corresponding mailbox exists. If not, it echo the commands to remove the stale indices. From there, you can review it, or pipe it into sh. I can post it if there's any interest, but it's not that hard to write. This is only necessary, of course, if you store the indices in a different place than the mail folder. Joseph Tam <jtam.home(a)gmail.com>

1 0

[Dovecot] Upgrading dovecot 1.0.7 -> 2.0.14 / Redhat EL 5.7
by Götz Reinicke 02 Nov '11

02 Nov '11

Hi, recently I debugged some load and performance and 'log out' problems and found an error in the dovecot logs: Error: pipe() failed: Too many open files Googling around and reading some posts led to the conclusion, that my problem is a bug, which will not be removed. So I'm thinking of upgrading to the latest prebuild rpm from here: http://packages.atrpms.net/dist/el5/dovecot/ As far as I understand the upgrading instructions, I'll be save as we dont use special setting, but I'll check all changes. My question: Dose anybody has done such an upgrade yet? Or are there any suggestion or hints? Thanks a lot and best regards. Götz -- Götz Reinicke IT-Koordinator Tel. +49 7141 969 420 Fax +49 7141 969 55 420 E-Mail goetz.reinicke(a)filmakademie.de Filmakademie Baden-Württemberg GmbH Akademiehof 10 71638 Ludwigsburg www.filmakademie.de Eintragung Amtsgericht Stuttgart HRB 205016 Vorsitzender des Aufsichtsrats: Jürgen Walter MdL Staatssekretär im Ministerium für Wissenschaft, Forschung und Kunst Baden-Württemberg Geschäftsführer: Prof. Thomas Schadt

1 0

[Dovecot] antispam for dovecot 2.0
by Lars Täuber 01 Nov '11

01 Nov '11

Hi! Is there anybody out there who has ported the antispam-storage-1.x.c to antispam-storage-2.0.c? Or is there an alternative to the antispam plugin? Thanks Lars

2 2

[Dovecot] dsync should sync sieve-dirs to!
by Peer Heinlein 01 Nov '11

01 Nov '11

Having dsync to make backups from existing mail-spaces, it would be nice to make dsync syncing the sieve-dirs too. -Otherweise backups aren't complete... Peer -- Heinlein Professional Linux Support GmbH Linux: Akademie - Support - Hosting http://www.heinlein-support.de Tel: 030 / 40 50 51 - 0 Fax: 030 / 40 50 51 - 19 Zwangsangaben lt. §35a GmbHG: HRB 93818 B / Amtsgericht Berlin-Charlottenburg, Geschäftsführer: Peer Heinlein -- Sitz: Berlin

8 15

[Dovecot] Problems with permissions on mail_location
by Vlad 31 Oct '11

31 Oct '11

Hi, All! I have 2.0.beta6 (3156315704ef) Trying to set up Dovecot with virtual users. mail_uid=mail mail_gid=mail mail_location = maildir:/var/mail/%n /var/mail owner is mail:mail, permissions is 777 From error log: Oct 31 13:34:17 imap(test): Error: user test: Initialization failed:Initializing mail storage from mail_location setting failed: mkdir(/var/mail/test) failed: Permission denied (euid=8(mail) egid=12(mail) missing +w perm: /var/mail, euid is not dir owner) but /var/mail owner is mail:mail (same the euid, egid). In what may be the problem? (With full rights to the directory dovecot does not want to write it :-\ ) If I change /var/mail to /tmp/mail (for testing), then everything works fine, dovecot can write to this directory. But if i create /test/mail, or /mail with chmod 777 and chown mail:mail - again the same error :-( -- С уважением, Vlad mailto:vladsol@ukr.net

2 2

[Dovecot] dovecot creating literal %d/%n/ folders
by sean darcy 31 Oct '11

31 Oct '11

I have a virtual user test1. cat /etc/dovecot/users test1@<mydomain>:{PLAIN}test1pass:504:504::/home/vmail/%d/%n catchall@<mydomain>:{PLAIN}password:504:504::/home/vmail/%d/%n @<mydomain>:{PLAIN}password:504:504::/home/vmail/<mydomain>/catchall test1@example.com:{PLAIN}test1pass:504:504::/home/vmail/%d/%n ls /home/vmail/%d/%n/mail cur dovecot.index.cache dovecot.index.log dovecot-uidlist dovecot-uidvalidity dovecot-uidvalidity.4eab20a7 new tmp and mail to test1@<mydomain> goes into this %d/%n folder. In fact dovecot created the folder - at least I didn't. from dovecot-info.log Oct 28 17:43:11 auth: Debug: master in: USER 4 test1@<mydomain> service=lmtp Oct 28 17:43:11 auth: Debug: passwd(test1@<mydomain>): lookup Oct 28 17:43:11 auth: Info: passwd(test1@<mydomain>): unknown user Oct 28 17:43:11 auth: Debug: passwd-file(test1@<mydomain>): lookup: user=test1@<mydomain> file=/etc/dovecot/users Oct 28 17:43:11 auth: Debug: master out: USER 4 test1@<mydomain> uid=504 gid=504 home=/home/vmail/%d/%n Oct 28 17:43:11 lmtp(4533, test1@<mydomain>): Info: l6DnLacgq061EQAABoXEcA: msgid=<4EAB21EC.9070905(a)gmail.com>: saved mail to INBOX I would have expected dovecot to expand this to /home/vmail/<mydomain>/test1. Or are the %u %d variables only expanded in certain files? sean

2 1

[Dovecot] Manage dovecot maildir on multiple servers
by Arlin 31 Oct '11

31 Oct '11

Any suggestions on how to implement dovecot maildir on multiple servers. Does this required independent installation of Dovecot on each servers, or a single instance of Dovecot with shared MailDir would serve the purpose? Thanks, Arlin

1 0

[Dovecot] how to tell dovecot v2.0.1 not to listen on port 143
by Lars Täuber 28 Oct '11

28 Oct '11

Hi. Sorry for breaking this thread, but I just subscribed from a different address. I made a mistake. I didn't mean »imaps« but »imap2« How can I configure dovecot not to listen for imap connections on port 143. I want dovecot to listen only on port 993. And ssl = required is already set. So this is not the right solution. I just comemnted the whole inet_listener imap {...} section out. But this seems to be some kind of default setting. I tried to set: inet_listener { address = none } I tried to leave the address variable blank. But no succes. Good night Lars

2 2

[Dovecot] how to tell dovecot v2.0.1 not to listen on port 143
by Lars Täuber 28 Oct '11

28 Oct '11

Hi there. How can I configure dovecot not to listen for imaps connections on port 143. Thanks Lars

6 6

[Dovecot] Are you successfully using using SQL queries to manage Dovecot2 Quota Values & Limits?
by Rich 28 Oct '11

28 Oct '11

On Mon, Oct 24, 2011 at 11:14 AM, Rich <pgnet.dev+rich-dovecot(a)gmail.com> wrote: > I'm able to consistently reproduce this problem/behavior, but not > workaround or fix it, yet. > > Rich > > On Wed, Oct 19, 2011 at 7:41 AM, Rich <pgnet.dev+rich-dovecot(a)gmail.com> wrote: >> I've made some progress, but quota 'Limit' is still not fully >> functioning for me. >> >> A couple of changes have helped: >> >> Specifying a "%u% as username format, >> >> /etc/dovecot/conf.d/90-quota.conf >> plugin { >> - quota = dict:User Quota::proxy::quota >> + quota = dict:User Quota:%u:proxy::quota >> quota_rule = *:bytes=1073741824:messages=10000 >> quota_rule2 = Trash:storage=+10%% >> } >> >> using 'username' rather than 'user' in the user iteration query >> >> /etc/dovecot/sql/virtmail-userdb-sql.cf >> driver = mysql >> connect = host=/var/run/mysql/mysql.sock dbname=my_db user=my_user >> password=my_pass >> user_query = CALL UserDBQuery('%n','%d'); >> - iterate_query = SELECT `MAILBOX_user_domain` AS user FROM `PARAMS`; >> + iterate_query = SELECT `MAILBOX_user_domain` AS username FROM `PARAMS`; >> >> and adding to my user_query, >> >> CREATE PROCEDURE `UserDBQuery`( >> ... >> SELECT ... >> concat('*:bytes=', quota_bytes, ':messages=10000') AS quota_rule, >> ... >> >> Now, at init, >> >> doveadm quota get -A >> Username Quota name Type Value Limit % >> myuser(a)domain1.com User quota STORAGE 0 0 0 >> myuser(a)domain1.com User quota MESSAGE 0 10000 0 >> myuser(a)domain2.com User quota STORAGE 0 0 0 >> myuser(a)domain2.com User quota MESSAGE 0 10000 0 >> >> mysql> select * from PARAMS; >> +----+------------------------+------------+-------------+ >> | ai | MAILBOX_user_domain | quota_bytes | quota_msgs | >> +----+------------------------+-------------+------------+ >> | 1 | myuser(a)domain1.com | 0 | 0 | >> | 2 | myuser(a)domain2.com | 0 | 0 | >> +----+------------------------+------------+-------------+ >> 2 rows in set (0.00 sec) >> >> and, after sending a single message to 'myuser(a)domain1.com', I do see >> that Dovecot now recognizes/calculates a quota change, and only for >> one domain, >> >> doveadm quota get -A >> Username Quota name Type Value Limit % >> myuser(a)domain1.com User quota STORAGE 3 3 100 >> myuser(a)domain1.com User quota MESSAGE 1 10000 0 >> myuser(a)domain2.com User quota STORAGE 0 0 0 >> myuser(a)domain2.com User quota MESSAGE 0 10000 0 >> >> mysql> select * from PARAMS; >> +----+------------------------+------------+-------------+ >> | ai | MAILBOX_user_domain | quota_bytes | quota_msgs | >> +----+------------------------+-------------+------------+ >> | 1 | myuser(a)domain1.com | 3269 | 1 | >> | 2 | myuser(a)domain2.com | 0 | 0 | >> +----+------------------------+------------+-------------+ >> 2 rows in set (0.00 sec) >> >> >> But, the Limit's wrong. It's not picking up the global Limit from >> >> /etc/dovecot/conf.d/90-quota.conf >> ... >> --> quota_rule = *:bytes=1073741824:messages=10000 >> ... >> >> and once a message quota Value is calculated, the Limit is set == >> Value, resulting in an incorrrect quota %-age of 100%. >> >> Is Limit supposed to be specified per-user? >> >> Rich >> >

1 0

[Dovecot] Quotas with Maildir and mdbox
by Dr Matthew Williams 28 Oct '11

28 Oct '11

Hello, We use LDAP to store our Maildir++ quota information for our Maildir mailboxes. I notice in the documentation that only SQL and flat files are supported by the dictionary quota if I want to use quota with mdbox? Are there any plans to allow LDAP to be used as the store? Regards, Matthew. -- Dr Matthew Williams MEng PhD MBCS Systems Administrator - IT Services - Bangor University Prifysgol Bangor Tel: (44) (0)1248 382414 Adeilad Deiniol Mob: (44) (0)7979 778269 Ffordd Deiniol URL: www.bangor.ac.uk Bangor, Gwynedd LL57 2UX EMail: matthew.williams(a)bangor.ac.uk -- Gall y neges e-bost hon, ac unrhyw atodiadau a anfonwyd gyda hi, gynnwys deunydd cyfrinachol ac wedi eu bwriadu i'w defnyddio'n unig gan y sawl y cawsant eu cyfeirio ato (atynt). Os ydych wedi derbyn y neges e-bost hon trwy gamgymeriad, rhowch wybod i'r anfonwr ar unwaith a dilëwch y neges. Os na fwriadwyd anfon y neges atoch chi, rhaid i chi beidio â defnyddio, cadw neu ddatgelu unrhyw wybodaeth a gynhwysir ynddi. Mae unrhyw farn neu safbwynt yn eiddo i'r sawl a'i hanfonodd yn unig ac nid yw o anghenraid yn cynrychioli barn Prifysgol Bangor. Nid yw Prifysgol Bangor yn gwarantu bod y neges e-bost hon neu unrhyw atodiadau yn rhydd rhag firysau neu 100% yn ddiogel. Oni bai fod hyn wedi ei ddatgan yn uniongyrchol yn nhestun yr e-bost, nid bwriad y neges e-bost hon yw ffurfio contract rhwymol - mae rhestr o lofnodwyr awdurdodedig ar gael o Swyddfa Cyllid Prifysgol Bangor. www.bangor.ac.uk This email and any attachments may contain confidential material and is solely for the use of the intended recipient(s). If you have received this email in error, please notify the sender immediately and delete this email. If you are not the intended recipient(s), you must not use, retain or disclose any information contained in this email. Any views or opinions are solely those of the sender and do not necessarily represent those of the Bangor University. Bangor University does not guarantee that this email or any attachments are free from viruses or 100% secure. Unless expressly stated in the body of the text of the email, this email is not intended to form a binding contract - a list of authorised signatories is available from the Bangor University Finance Office. www.bangor.ac.uk

2 1

[Dovecot] adding dovecot to webmin list of services
by Spyros Tsiolis 28 Oct '11

28 Oct '11

Hello , I am playing with webmin these days and find it really fun to install and use everyday. However, on the services option, amongst other services, the dovecot service is not shown. Does anyone out there have similar experience with webmin and dovecot and know how to make it appear there ? I am using CentOS (5.5/5.6/5.7) 32-bit Dovecot was installed manually and not from yum (.rpm) Dovecot v1.2.15 TIA, s. ---- "I merely function as a channel that filters music through the chaos of noise" - Vangelis

1 1

[Dovecot] IMAP shows forwarding and vacation files
by Nico Suhl 28 Oct '11

28 Oct '11

Hello, I'm migrating our mailserver from a linux machine to solaris and got some small problems with our forwarding and vacation files, which are stored in the maildir of each user. I'm now using 2.0.15, on the old machine there was a dovecot 1. Now the problem is, that the .forward and .vacation files, which are used by exim, are shown as folders (they have a point...) in imap lists. This problem only occurs on the new solaris machine and not on the old linux system (with dovecot v1) or another testing machine with dovecot 2, which runs also under linux. userdb lookups are static with system account/group of exim. Is there any way to "hide" the .forward and .vacation files or do i have to rename or move them? Why are they shown here and not on our testsystems? regards, Nico Suhl

2 1

Re: [Dovecot] newbie: can't login as virtual user
by Joseph Tam 28 Oct '11

28 Oct '11

sean darcy writes: > Oct 22 21:45:55 auth: Debug: passwd(test1(a)example.com, ): lookup > Oct 22 21:45:55 auth: Info: passwd(test1(a)example.com, ): unknown user > Oct 22 21:45:55 auth: Debug: passwd-file(test1(a)example.com, ): > lookup: user=test1(a)example.com file=/etc/dovecot/users > Oct 22 21:45:55 auth: Debug: master out: USER 2303328257 test1(a)example.com > Oct 22 21:45:55 imap-login: Info: Login: user=<test1(a)example.com>, > method=PLAIN, rip= , lip= , mpid=27062, TLS I think up to now it's OK (not quite sure about "master out" log entry but it looks innocuous enough). Dovecot reports to have looked in the system password file, failed, then looked in /etc/dovecot/users and found the user and logged them in. I think the problem happens later and you will have to show the subsequent log entries. Joseph Tam <jtam.home(a)gmail.com>

1 0

[Dovecot] Temporary Failure that's Permanent!
by Jack Fredrikson 28 Oct '11

28 Oct '11

Hi; I continue to be plagued with this error: Oct 25 10:49:18 myserver postfix/pipe[3712]: 0423257901AB: to=<foo(a)bar.com>, relay=dovecot, delay=109318, delays=109318/0.14/0/0.1, dsn=4.3.0, status=deferred (temporary failure It's been a week that I've been working day and night to get this fixed. I forgot to add this information: [root]# doveconf -n auth_mechanisms = plain login first_valid_gid = 12 first_valid_uid = 86 mail_location = maildir:/var/vmail/%d/%u passdb { args = /usr/local/etc/dovecot/sql.conf driver = sql } plugin { quota = maildir:storage=10240:messages=1000 trash = /usr/local/etc/dovecot/trash.conf } protocols = imap pop3 service auth { unix_listener auth-userdb { group = postfix mode = 0660 user = postfix } user = root } ssl_cert = </etc/pki/tls/certs/mail.myserver.com.cert ssl_cipher_list = ALL:!LOW:!SSLv2 ssl_key = </etc/pki/tls/private/mail.myserver.com.key ssl_key_password = passwd userdb { args = /usr/local/etc/dovecot/sql.conf driver = sql } protocol imap { mail_plugins = quota imap_quota } protocol pop3 { mail_plugins = quota pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } protocol lda { hostname = myserver.com info_log_path = /var/log/dovecot-deliver.log log_path = /var/log/dovecot-deliver.log mail_plugins = quota postmaster_address = postmaster(a)creative.vi sendmail_path = /usr/sbin/sendmail.postfix } [root] # vi main.cf queue_directory = /var/spool/postfix myorigin = $mydomain command_directory = /usr/sbin daemon_directory = /usr/libexec/postfix mail_owner = postfix inet_interfaces = all unknown_local_recipient_reject_code = 550 debug_peer_list = sendmail_path = /usr/sbin/sendmail.postfix newaliases_path = /usr/bin/newaliases mailq_path = /usr/bin/mailq setgid_group = postdrop html_directory = no manpage_directory = /usr/local/man sample_directory = /etc/postfix readme_directory = no mydomain = myserver.com mydestination = $mydomain, $myhostname, localhost.$mydomain mail_spool_directory = /var/spool/mail home_mailbox = Mailbox disable_vrfy_command = yes show_user_unknown_table_name = no data_directory = /var/lib/postfix # --------------- local settings ------------------ myhostname = myserver.com inet_interfaces = localhost, $myhostname mynetworks = $config_directory/mynetworks #mydestination = localhost.$mydomain, localhost, $myhostname #uncomment if you need relay_domains... do not list domains in both relay and virtual relay_domains = proxy:mysql:$config_directory/mysql_relay_domains_maps.cf # ---------------------- VIRTUAL DOMAINS START ---------------------- virtual_mailbox_base = /var/vmail virtual_mailbox_domains = proxy:mysql:$config_directory/mysql_virtual_domains_maps.cf virtual_mailbox_maps = proxy:mysql:$config_directory/mysql_virtual_mailbox_maps.cf virtual_alias_maps = proxy:mysql:$config_directory/mysql_virtual_alias_maps.cf virtual_mailbox_limit_maps = proxy:mysql:/etc/postfix/mysql_virtual_mailbox_limit_maps.cf virtual_minimum_uid = 89 virtual_uid_maps = static:89 virtual_gid_maps = static:89 virtual_transport = dovecot dovecot_destination_recipient_limit = 1 # ---------------------- VIRTUAL DOMAINS END ---------------------- # ---------------------- SASL PART START ---------------------- smtpd_sasl_auth_enable = yes smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination smtpd_sasl_security_options = noanonymous broken_sasl_auth_clients = yes smtpd_sasl_type = dovecot smtpd_sasl_path = /var/spool/postfix/private/auth smtpd_sasl_application_name = smtpd # ---------------------- SASL PART END ---------------------- smtpd_soft_error_limit = 10 smtpd_hard_error_limit = 20 smtpd_helo_required = yes disable_vrfy_command = yes non_fqdn_reject_code = 504 invalid_hostname_reject_code = 450 maps_rbl_reject_code = 554 alias_maps = hash:/etc/aliases reject_unknown_client = false reject_unknown_hostname = false mailbox_command = /usr/local/libexec/dovecot/deliver -f "$SENDER" -a "$RECIPIENT" [root] # vi master.cf smtp inet n - n - - smtpd submission inet n - - - - smtpd -D -o smtpd_tls_security_level=encrypt -o smtpd_sasl_auth_enable=yes -o smtpd_sasl_type=dovecot -o smtpd_sasl_path=private/auth -o smtpd_sasl_security_options=noanonymous -o smtpd_sasl_local_domain=$myhostname -o smtpd_client_restrictions=permit_sasl_authenticated,reject -o smtpd_sender_login_maps=hash:/etc/postfix/virtual -o smtpd_sender_restrictions=reject_sender_login_mismatch -o smtpd_recipient_restrictions=reject_unknown_recipient_domain,reject_non_fqdn_recipient,permit_sasl_authenticated,reject amavisfeed unix - - n - 2 lmtp -o lmtp_data_done_timeout=1200 -o lmtp_send_xforward_command=yes -o disable_dns_lookups=yes -o max_use=20 587 inet n - n - - smtpd pickup fifo n - n 60 1 pickup cleanup unix n - n - 0 cleanup qmgr fifo n - n 300 1 qmgr tlsmgr unix - - n 1000? 1 tlsmgr rewrite unix - - n - - trivial-rewrite bounce unix - - n - 0 bounce defer unix - - n - 0 bounce trace unix - - n - 0 bounce verify unix - - n - 1 verify flush unix n - n 1000? 0 flush proxymap unix - - n - - proxymap smtp unix - - n - - smtp relay unix - - n - - smtp -o fallback_relay= showq unix n - n - - showq error unix - - n - - error discard unix - - n - - discard local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - n - - lmtp anvil unix - - n - 1 anvil scache unix - - n - 1 scache maildrop unix - n n - - pipe flags=DRhu user=vmail argv=/usr/local/bin/maildrop -d ${recipient} uucp unix - n n - - pipe flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient) ifmail unix - n n - - pipe flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient) bsmtp unix - n n - - pipe flags=Fq. user=foo argv=/usr/local/sbin/bsmtp -f $sender $nexthop $recipient retry unix - - n - - error proxywrite unix - - n - 1 proxymap dovecot unix - n n - - pipe flags=DRhu user=dovecot argv=/usr/local/libexec/dovecot/dovecot-lda -f ${sender} ${recipient} spamfilter unix - n n - - pipe flags=Rq user=spamfilter argv=/usr/local/bin/spamfilter -f ${sender} -- ${recipient} TIA, Jack

9 15

[Dovecot] newbie: can't login as virtual user
by sean darcy 28 Oct '11

28 Oct '11

dovecot -n # 2.0.15: /etc/dovecot/dovecot.conf # OS: Linux 2.6.38.8-32.fc15.i686.PAE i686 Fedora release 15 (Lovelock) auth_debug_passwords = yes disable_plaintext_auth = no info_log_path = /var/log/dovecot-info.log log_path = /var/log/dovecot.log mail_access_groups = mail mail_location = mbox:~/mail:INBOX=/var/spool/mail/%u mail_privileged_group = mail mbox_write_locks = fcntl passdb { args = username_format=%u /etc/dovecot/users driver = passwd-file } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0666 user = postfix } } ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { driver = passwd } userdb { args = username_format=%u /etc/dovecot/users driver = passwd-file } protocol lmtp { mail_plugins = quota sieve } cat /etc/dovecot/users .......... test1@example.com:{PLAIN}test1pass BUT, . OK Pre-login capabilities listed, post-login capabilities have more. a login test1(a)example.com test1pass * BYE Internal error occurred. Refer to server log for more information. closed From the server: Oct 22 21:45:53 auth-worker: Debug: passwd-file /etc/dovecot/users: Read 5 users Oct 22 21:45:53 auth-worker: Debug: pam(test1(a)example.com,www.xx.yy.zz): lookup service=dovecot Oct 22 21:45:53 auth-worker: Debug: pam(test1(a)example.com, ): #1/1 style=1 msg=Password: Oct 22 21:45:55 auth-worker: Info: pam(test1(a)example.com, ): unknown user Oct 22 21:45:55 auth: Debug: passwd-file(test1(a)example.com, ): lookup: user=test1(a)example.com file=/etc/dovecot/users Oct 22 21:45:55 auth: Debug: client out: OK 1 user=test1(a)example.com Oct 22 21:45:55 auth: Debug: master in: REQUEST 2303328257 27060 1 964b20421c19356f1cbdefbf976467e0 Oct 22 21:45:55 auth: Debug: passwd(test1(a)example.com, ): lookup Oct 22 21:45:55 auth: Info: passwd(test1(a)example.com, ): unknown user Oct 22 21:45:55 auth: Debug: passwd-file(test1(a)example.com, ): lookup: user=test1(a)example.com file=/etc/dovecot/users Oct 22 21:45:55 auth: Debug: master out: USER 2303328257 test1(a)example.com Oct 22 21:45:55 imap-login: Info: Login: user=<test1(a)example.com>, method=PLAIN, rip= , lip= , mpid=27062, TLS What's wrong with my configuration? Thanks, sean

1 0

[Dovecot] Configuring mbox and maildir formats - dovecot-1.2.15
by Albert E. Whale 28 Oct '11

28 Oct '11

I am transitioning an existing server from using exclusively mbox, to being able to support both mbox and then fully maildir formats. I need to support the mbox format until I can get everyone switched over to maildir. What do I need to to use in the config of /etc/dovecot.conf to support the default of mbox, and then the new Maildir format (users will get upgraded individually from mbox to Maildir, and need to be upgraded). Thank you. -- Albert E. Whale, CHS CISA CISSP Senior Technology & Security Director *ABS Computer Technology, Inc. * 412-635-7488 ext 100 aewhale(a)ABS-CompTech.com <mailto:aewhale@ABS-CompTech.com> www.ABS-CompTech.com <http://www.ABS-CompTech.com>

2 1

[Dovecot] variable for gid
by Limperis Antonis 26 Oct '11

26 Oct '11

Hi Is possible for a variable for gid of each user, such as %ifor uid . Thanks for your attention Antonis

2 1

[Dovecot] Marathon Day 6 of First Install: MySQL Connection Problem
by Jack Fredrikson 25 Oct '11

25 Oct '11

Hi; This is my 6th day installing my first Postfix/Dovecot installation. The Postfix mailing list indicates I've got the MTA under control so now I'm seeking your help with the MDA. I get these errors with legitimate email addresses: Oct 24 11:47:38 myserver dovecot: auth-worker: Error: mysql(localhost): Connect failed to database (postfix): Access denied for user 'dovecot'@'localhost' (using password: YES) - waiting for 25 seconds before retry Now I've logged in myself: mysql -u dovecot -p Enter password: xxx and succeeded. What am I doing wrong? I've noticed that every time I restart dovecot I get this error in the dovecot-deliver.log: Oct 24 11:31:11 lda: Error: userdb lookup: connect(/usr/local/var/run/dovecot/auth-userdb) failed: Permission denied (euid=512(vmail) egid=512(vmail) missing +r perm: /usr/local/var/run/dovecot/auth-userdb, dir owned by 0:0 mode=0755) Oct 24 11:31:11 lda: Fatal: Internal error occurred. Refer to server log for more information. Every time I go to chmod 666 on that file, restarting dovecot wipes those permissions. How fix? Even when I fix that, I still get the "temporary failure". Please advise. TIA, Jack

7 20

Re: [Dovecot] sieve-pipe Error
by Stephan Bosch 25 Oct '11

25 Oct '11

Op 25-10-2011 9:33, Ian Barton schreef: > On 24/10/11 23:33, Stephan Bosch wrote: >> On 10/24/2011 12:00 PM, Ian Barton wrote: >>> I am using Dovecot 2.0.15 on Arch. I have cloned the hg repo and >>> compiled the plugin using the following options: >>> >>> ./configure --with-dovecot=/usr/lib/dovecot >>> --with-pigeonhole=/usr/include/dovecot/sieve/ >>> >>> The relevant section of my dovecot.conf looks like: >>> >>> plugin { >>> sieve = ~/.dovecot.sieve >>> sieve_global_path = /home/vmail/globalsieverc >>> sieve_dir = ~/ >>> >>> sieve_plugins = sieve_pipe >>> # This directory contains the scripts that are available. >>> sieve_pipe_bin_dir = /usr/lib/dovecot/sieve-pipe >>> } >>> >>> When I restart Dovecot I get the following error: >>> >>> ian:dovecot/ $ sudo rc.d restart dovecot [10:50:53] >>> :: Stopping dovecot daemon [DONE] >>> :: Starting dovecot daemon [BUSY] managesieve: Fatal: >>> opendir(/usr/lib/dovecot/modules/sieve) failed: No such file or >>> directory >>> doveconf: Error: managesieve-login: dump-capability process returned 89 >> >> Apparently, the plugin is not installed in the correct location. Try >> supplying a --with-moduledir=/usr/lib/dovecot/modules . >> >> After make install, the /usr/lib/dovecot/modules/sieve directory should >> contain lib90_sieve_pipe_plugin.so. >> > > Thank you that worked. Now to test if it's working:) Please reply to the mailing list as well. Regards, Stephan.

1 0

[Dovecot] sieve-pipe Error
by Ian Barton 25 Oct '11

25 Oct '11

I am using Dovecot 2.0.15 on Arch. I have cloned the hg repo and compiled the plugin using the following options: ./configure --with-dovecot=/usr/lib/dovecot --with-pigeonhole=/usr/include/dovecot/sieve/ The relevant section of my dovecot.conf looks like: plugin { sieve = ~/.dovecot.sieve sieve_global_path = /home/vmail/globalsieverc sieve_dir = ~/ sieve_plugins = sieve_pipe # This directory contains the scripts that are available. sieve_pipe_bin_dir = /usr/lib/dovecot/sieve-pipe } When I restart Dovecot I get the following error: ian:dovecot/ $ sudo rc.d restart dovecot [10:50:53] :: Stopping dovecot daemon [DONE] :: Starting dovecot daemon [BUSY] managesieve: Fatal: opendir(/usr/lib/dovecot/modules/sieve) failed: No such file or directory doveconf: Error: managesieve-login: dump-capability process returned 89 Ian.

2 1

[Dovecot] xi.rename-it.nl down?
by Jim Knuth 25 Oct '11

25 Oct '11

Hello, is http://xi.rename-it.nl down? Apticron shows me permanently errors. -- Mit freundlichen Grüßen, with kind regards, Jim Knuth --------- Wenn ein wirklich großer Geist in der Welt erscheint, kann man ihn untrüglich daran erkennen, daß sich alle Dummköpfe gegen ihn verbünden. (Jonathan Swift)

3 5

[Dovecot] [bug] Changing dovecot 'quota' Value incorrectly overwrites Limit with same value
by Rich 24 Oct '11

24 Oct '11

I'm able to consistently reproduce this problem/behavior, but not workaround or fix it, yet. Rich On Wed, Oct 19, 2011 at 7:41 AM, Rich <pgnet.dev+rich-dovecot(a)gmail.com> wrote: > I've made some progress, but quota 'Limit' is still not fully > functioning for me. > > A couple of changes have helped: > > Specifying a "%u% as username format, > > /etc/dovecot/conf.d/90-quota.conf > plugin { > - quota = dict:User Quota::proxy::quota > + quota = dict:User Quota:%u:proxy::quota > quota_rule = *:bytes=1073741824:messages=10000 > quota_rule2 = Trash:storage=+10%% > } > > using 'username' rather than 'user' in the user iteration query > > /etc/dovecot/sql/virtmail-userdb-sql.cf > driver = mysql > connect = host=/var/run/mysql/mysql.sock dbname=my_db user=my_user > password=my_pass > user_query = CALL UserDBQuery('%n','%d'); > - iterate_query = SELECT `MAILBOX_user_domain` AS user FROM `PARAMS`; > + iterate_query = SELECT `MAILBOX_user_domain` AS username FROM `PARAMS`; > > and adding to my user_query, > > CREATE PROCEDURE `UserDBQuery`( > ... > SELECT ... > concat('*:bytes=', quota_bytes, ':messages=10000') AS quota_rule, > ... > > Now, at init, > > doveadm quota get -A > Username Quota name Type Value Limit % > myuser(a)domain1.com User quota STORAGE 0 0 0 > myuser(a)domain1.com User quota MESSAGE 0 10000 0 > myuser(a)domain2.com User quota STORAGE 0 0 0 > myuser(a)domain2.com User quota MESSAGE 0 10000 0 > > mysql> select * from PARAMS; > +----+------------------------+------------+-------------+ > | ai | MAILBOX_user_domain | quota_bytes | quota_msgs | > +----+------------------------+-------------+------------+ > | 1 | myuser(a)domain1.com | 0 | 0 | > | 2 | myuser(a)domain2.com | 0 | 0 | > +----+------------------------+------------+-------------+ > 2 rows in set (0.00 sec) > > and, after sending a single message to 'myuser(a)domain1.com', I do see > that Dovecot now recognizes/calculates a quota change, and only for > one domain, > > doveadm quota get -A > Username Quota name Type Value Limit % > myuser(a)domain1.com User quota STORAGE 3 3 100 > myuser(a)domain1.com User quota MESSAGE 1 10000 0 > myuser(a)domain2.com User quota STORAGE 0 0 0 > myuser(a)domain2.com User quota MESSAGE 0 10000 0 > > mysql> select * from PARAMS; > +----+------------------------+------------+-------------+ > | ai | MAILBOX_user_domain | quota_bytes | quota_msgs | > +----+------------------------+-------------+------------+ > | 1 | myuser(a)domain1.com | 3269 | 1 | > | 2 | myuser(a)domain2.com | 0 | 0 | > +----+------------------------+------------+-------------+ > 2 rows in set (0.00 sec) > > > But, the Limit's wrong. It's not picking up the global Limit from > > /etc/dovecot/conf.d/90-quota.conf > ... > --> quota_rule = *:bytes=1073741824:messages=10000 > ... > > and once a message quota Value is calculated, the Limit is set == > Value, resulting in an incorrrect quota %-age of 100%. > > Is Limit supposed to be specified per-user? > > Rich >

1 0