- dovecot - dovecot.org

[Dovecot] Empty/corrupt mail leads to duplicate delivery
by Marc Herbrechter 29 Oct '08

29 Oct '08

Hi, when the attached mail was stored in a maildir, fetching mail via POP3 lead to multiple delivery of mails in that maildir to the client (Outlook). I replaced the domain with dots. This is the dovecot configuration: --snip-- protocols = imap imaps pop3 pop3s listen = * disable_plaintext_auth = no ssl_cert_file = /etc/ssl/dovecot/server.pem ssl_key_file = /etc/ssl/dovecot/server.key mail_location = maildir:~/.maildir protocol pop3 { pop3_uidl_format = %08Xu%08Xv } auth default { mechanisms = plain passdb pam { args = "*" } userdb passwd { } user = root socket listen { client { path = /var/spool/postfix/private/auth mode = 0660 user = postfix group = postfix } } } --snip-- Version: dovecot-1.1.4-r1 (Gentoo) Gentoo applies the attached "expire" patch. I tried to reproduce the behavior, but when I send an empty mail via telnet, nothing happens. The box is running Amavis, don't know if that helps. -- Mit freundlichen Grüßen, with kind regards, Marc Herbrechter <mh(a)zebroc.de>

2 1

[Dovecot] Keep the email on the server
by Rubens A. Mascari 29 Oct '08

29 Oct '08

Hello, I migrate my server POP3/IMAP recently the Courier-IMAP for Dovecot and am having problems when the user configures your e-mail client to leave a copy of mail on the server. All mail in the inbox, are brought all the time that you check your mailbox input via POP3, causing a large traffic of unnecessary data every time. In my opinion you should bring only the new mail, unread. Can you tell me if this is a configuration issue on Dovecot? Thank you all -- Att. Rubens Aurelio Mascari ..................................... _ Linux & Internet Developer .... ICQ# 2730907 ............... °v° Odara Internet LTDA............ (44) 3226-3662 ............. /(_)\ Maringá - Paraná .............. http://www.odara.com.br .... ^ ^ ______.-""-.__ QuEm TeM o CoNhEcImEnTo TeM o PoDeR __.-""-._______

3 3

[Dovecot] POP3 auth failures
by CJ Keist 29 Oct '08

29 Oct '08

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Have a strange problem with just POP3 users. Their email clients will fail every so often with the following: Logging into POP Server, PASS [09:16:29 PM] There has been an error transferring your mail. I said PASS <shhhh! Don't tell anyone.> and then the POP server (user(a)mail.engr.colostate.edu) said: ERR Authentication failed. This example is from a Eudora client, but same things happen with Thunderbird and Outlook. Here are logs. This user has his client checking every 10 minutes. First log entry here is last good one before it fails: Oct 28 21:06:27 goku dovecot: [ID 107833 mail.info] auth(default): client in: AUTH 1 PLAIN service=pop3 secured lip=129.82.224.16 rip=129.82.224.206 lport=110 rport=3716 resp=<hidden>Oct 28 21:06:27 goku dovecot: [ID 107833 mail.info] auth-worker(default): pam(us er,129.82.224.206): lookup service=dovecotOct 28 21:06:27 goku dovecot: [ID 107833 mail.info] auth-worker(default): pam(us er,129.82.224.206): #1/1 style=1 msg=Password:Oct 28 21:06:27 goku dovecot: [ID 107833 mail.info] auth(default): client out: O K 1 user=user Oct 28 21:06:27 goku dovecot: [ID 107833 mail.info] auth(default): master in: REQUEST 387983 2809 1 Oct 28 21:06:27 goku dovecot: [ID 107833 mail.info] auth-worker(default): passwd(user,129.82.224.206): lookup Oct 28 21:06:27 goku dovecot: [ID 107833 mail.info] auth(default): master out: USER 387983 user system_user=user uid=12550 gid=32 home=/to p/admin/ENS/people/user/home Oct 28 21:06:27 goku dovecot: [ID 107833 mail.info] pop3-login: Login: user=<use r>, method=PLAIN, rip=129.82.224.206, lip=129.82.224.16, TLS Oct 28 21:06:27 goku dovecot: [ID 107833 mail.info] POP3(user): Effective uid=12 550, gid=32 Everything went fine here, then the next auth attempt fails: Oct 28 21:16:27 goku dovecot: [ID 107833 mail.info] auth(default): client in: AUTH 1 PLAIN service=pop3 secured lip=129.82.224.16 rip=129.82.224.206 lport=110 rport=3757 resp=<hidden>Oct 28 21:16:27 goku dovecot: [ID 107833 mail.info] auth-worker(default): pam(user,129.82.224.206): lookup service=dovecotOct 28 21:16:27 goku dovecot: [ID 107833 mail.info] auth-worker(default): pam(user,129.82.224.206): #1/1 style=1 msg=Password:Oct 28 21:16:27 goku dovecot: [ID 107833 mail.error] auth-worker(default): pam(user,129.82.224.206): pam_authenticate() failed: No account present for user Oct 28 21:16:27 goku dovecot: [ID 107833 mail.info] auth-worker(default): passwd(user,129.82.224.206): lookup Oct 28 21:16:27 goku dovecot: [ID 107833 mail.info] auth-worker(default): passwd(user,129.82.224.206): Password mismatch Running dovecot 1.1.3 on Solaris 10 goku % ./dovecot -n # 1.1.3: /userM/mail-services/dovecot/etc/dovecot.conf Warning: fd limit 256 is lower than what Dovecot can use under full load (more than 3072). Either grow the limit or change login_max_processes_count and max_mail_processes settings base_dir: /userM/mail-services/dovecot/var/run/dovecot/ protocols: imap imaps pop3 pop3s ssl_cert_file: /userM/mail-services/dovecot/etc/ssl/dovecot.pem ssl_key_file: /userM/mail-services/dovecot/etc/ssl/privkey.pem ssl_parameters_regenerate: 0 ssl_cipher_list: MEDIUM:!LOW disable_plaintext_auth: no login_dir: /userM/mail-services/dovecot/var/run/dovecot/login login_executable(default): /userM/mail-services/dovecot/libexec/dovecot/imap-login login_executable(imap): /userM/mail-services/dovecot/libexec/dovecot/imap-login login_executable(pop3): /userM/mail-services/dovecot/libexec/dovecot/pop3-login login_greeting: Cyrus ready. login_max_processes_count: 1024 max_mail_processes: 1024 mail_location: mbox:~/:INBOX=/userM/mail/%u mail_debug: yes mmap_disable: yes mail_nfs_index: yes mbox_write_locks: fcntl dotlock mbox_dotlock_change_timeout: 60 mail_executable(default): /userM/mail-services/dovecot/libexec/dovecot/imap mail_executable(imap): /userM/mail-services/dovecot/libexec/dovecot/imap mail_executable(pop3): /userM/mail-services/dovecot/libexec/dovecot/pop3 mail_plugins(default): convert mail_plugins(imap): convert mail_plugins(pop3): mail_plugin_dir(default): /userM/mail-services/dovecot/lib/dovecot/imap mail_plugin_dir(imap): /userM/mail-services/dovecot/lib/dovecot/imap mail_plugin_dir(pop3): /userM/mail-services/dovecot/lib/dovecot/pop3 auth default: mechanisms: plain login verbose: yes debug: yes worker_max_count: 1024 worker_max_request_count: 20000 passdb: driver: pam passdb: driver: passwd args: blocking=yes userdb: driver: passwd args: blocking=yes socket: type: listen client: path: /var/lib/postfix/private/auth mode: 438 user: postfix group: postfix master: path: /userM/mail-services/dovecot/var/run/dovecot//auth-master mode: 384 plugin: convert_mail: Maildir:~/Maildir:INBOX=/userM/mail/%u - -- C. J. Keist Email: cj.keist(a)colostate.edu UNIX/Network Manager Phone: 970-491-0630 Engineering Network Services Fax: 970-491-5569 College of Engineering, CSU Ft. Collins, CO 80523-1301 All I want is a chance to prove 'Money can't buy happiness' -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (Darwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFJCHr3A29OFr7C6jcRAsBrAJ4h5f0naC1N4VHIlz4Z9rTWucicNACgxCJx 4lF8xzzBITsoboppIZD37n8= =TIUR -----END PGP SIGNATURE-----

2 1

[Dovecot] Dovecot failing to save email
by toneeedavis＠googlemail.com 29 Oct '08

29 Oct '08

Hi, Just wondered if anyone could help me with an issue im having with a new email server im setting up. These are the errors i have been getting: deliver(user(a)example.com): Oct 29 13:32:13 Info: msgid=< 20081029133208.23302C887A(a)mail.example.com>: save failed to INBOX: Quota exceeded deliver(user(a)example.com): Oct 29 13:32:13 Info: msgid=< 20081029133208.23302C887A(a)mail.example.com>: Rejected: Quota exceeded Dovecot Version - 1.0.15 Using MySQL # 1.0.15: /etc/dovecot.conf ssl_ca_file: /etc/pki/tls/certs/ca-bundle.crt login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login first_valid_uid: 5000 last_valid_uid: 5000 mail_access_groups: mail mail_location: maildir:/var/vmail/%d/%u maildir_copy_with_hardlinks: yes mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(pop3): quota mail_plugin_dir(default): /usr/lib/dovecot/imap mail_plugin_dir(imap): /usr/lib/dovecot/imap mail_plugin_dir(pop3): /usr/lib/dovecot/pop3 imap_client_workarounds(default): outlook-idle delay-newmail imap_client_workarounds(imap): outlook-idle delay-newmail imap_client_workarounds(pop3): outlook-idle pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh auth default: mechanisms: plain login user: nobody passdb: driver: sql args: /etc/dovecot/sql.conf userdb: driver: sql args: /etc/dovecot/sql.conf userdb: driver: prefetch socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: mail master: path: /var/run/dovecot/auth-master mode: 432 user: vmail group: mail plugin: #quota: maildir:storage=1000000:messages=1000 acl: vfile:/etc/dovecot/acls trash: /etc/dovecot/trash.conf Kind Regards Tony

2 1

[Dovecot] cannot use password-file for userdb
by Albert E. Whale 29 Oct '08

29 Oct '08

OK, I am attempting to use the userdb connection to facilitate per user migration to Maildir format from mbox. Here's the first user: more /home/dovecot.passwd health:$1$MCtvt/Tz$FmKqU/cbWlBhKnhc5W.Ko.:1152:1152:/home/health:userdb_mail=maildir:~/Maildir The configuration was set up as: userdb passwd { } I changed this to: userdb passwd-file { args = /home/dovecot.conf } And unfortunately the dovecot daemon dies after successfully launching. Suggestions? -- Albert E. Whale, CHS CISA CISSP Sr. Security, Network, Risk Assessment and Systems Consultant ------------------------------------------------------------------------ ABS Computer Technology, Inc. <http://www.ABS-CompTech.com> - Email, Internet and Security Consultants SPAMZapper <http://www.Spam-Zapper.com> - No-JunkMail.com <http://www.No-JunkMail.com> - *True Spam Elimination*.

3 9

[Dovecot] Quick question regarding autocreate plugin
by Jakob Curdes 29 Oct '08

29 Oct '08

Hello, just a quick question: if I want to use the autocreate plugin with 1.1.5, I have to compile it "by hand", right? How do I do that? Can I adapt a Makefile from another plugin? JC

1 1

[Dovecot] 1.1.5 abort with mal-formed address in header
by Richard Platel 29 Oct '08

29 Oct '08

Hi An email with a mal-formed address in a header like: To:(receiver@domain.com (Starting with a comment, with no closing ')' ) causes dovecot 1.1.5 to panic and abort. This is similar to the problem fixed by: http://hg.dovecot.org/ dovecot-1.1/rev/04fdaa2f831e This patch seems to resolve the problem: --- dovecot-1.1.5/src/lib-mail/message-address.c.orig 2008-10-23 22:17:10.243827000 +0000 +++ dovecot-1.1.5/src/lib-mail/message-address.c 2008-10-23 22:20:20.050173000 +0000 @@ -315,7 +315,7 @@ ctx.fill_missing = fill_missing; ret = rfc822_skip_lwsp(&ctx.parser); - if (ret == 0) { + if (ret <= 0) { /* no addresses */ return NULL; } Richard Platel rplatel(a)tucows.com

3 2

Re: [Dovecot] First release (v0.1.0) of the new Sieve implementation for Dovecot v1.2
by seriv＠parkheights.dyndns.org 29 Oct '08

29 Oct '08

Hi Stephan, I had a problem while compiling 0.1.0 libsieve with gcc3.4. --- /usr/include/bits/fcntl2.h:51: error: call to '__open_missing_mode' declared with attribute error: open with O_CREAT in second argument needs 3 arguments --- I propose a patch: $ cat dovecot-1.2-libsieve-gcc34.patch diff -ur dovecot1.2-libsieve-v1.2.orig/src/sieve-bin/bin-common.c dovecot1.2-libsieve-v1.2/src/sieve-bin/bin-common.c --- dovecot1.2-libsieve-v1.2.orig/src/sieve-bin/bin-common.c 2008-10-28 21:37:16 +0000 +++ dovecot1.2-libsieve-v1.2/src/sieve-bin/bin-common.c 2008-10-28 21:24:57 +0000 @@ -116,7 +116,7 @@ if ( strcmp(filename, "-") == 0 ) dumpstream = o_stream_create_fd(1, 0, FALSE); else { - if ( (dfd = open(filename, O_WRONLY | O_CREAT)) < 0 ) { + if ( (dfd = open(filename, O_WRONLY | O_CREAT, 0660)) < 0 ) { i_fatal("Failed to open dump-file for writing: %m"); exit(1); } diff -ur dovecot1.2-libsieve-v1.2.orig/src/testsuite/testsuite.c dovecot1.2-libsieve-v1.2/src/testsuite/testsuite.c --- dovecot1.2-libsieve-v1.2.orig/src/testsuite/testsuite.c 2008-10-28 21:37:16 +0000 +++ dovecot1.2-libsieve-v1.2/src/testsuite/testsuite.c 2008-10-28 21:35:18 +0000 @@ -119,7 +119,7 @@ if ( strcmp(filename, "-") == 0 ) dumpstream = o_stream_create_fd(1, 0, FALSE); else { - if ( (dfd = open(filename, O_WRONLY | O_CREAT)) < 0 ) { + if ( (dfd = open(filename, O_WRONLY | O_CREAT, 0660)) < 0 ) { i_fatal("Failed to open dump-file for writing: %m"); exit(1); } -- Sergey Ivanov. ----- "Stephan Bosch" <stephan(a)rename-it.nl> wrote: > Hello Dovecot users, > > Finally, after little more than a year, I finished the first release > of > the new Sieve implementation for Dovecot. [skip] > Have fun testing the new Sieve plugin. Don't hesitate to notify me > when > there are problems. > > Regards, > > -- > Stephan Bosch > stephan(a)rename-it.nl > IRC: Freenode, #dovecot, S[r]us

2 1

[Dovecot] Type error in wiki page: /Quota/1.1
by Zhang Huangbin 28 Oct '08

28 Oct '08

Hi, There should be an empty line between 'Subject' and mail body, otherwise mail body won't be included. ----<---- An alternative script using deliver would be: #!/bin/bash PERCENT=$1 cat << EOF | /usr/local/libexec/dovecot/deliver -d $USER -c /usr/local/etc/dovecot-nowarning.conf From: postmaster(a)domain.com Subject: quota warning Your mailbox is now $PERCENT% full. EOF ----<---- Like this: ----<---- [...skip...] Subject: quota warning Your mailbox is now $PERCENT% full. [...skip...] ----<---- Thanks. -- Best regards. - Open Source Mail Server Solution for RHEL/CentOS 5.x: http://code.google.com/p/iredmail/

1 0

[Dovecot] mbox to Maildir conversion
by Albert E. Whale 28 Oct '08

28 Oct '08

I've been running a mbox solution using UW's IMAP server. I've run it for years. Now do to heavy message volumes, I've decided to to take the plunge to convert to the Maildir format. I am currently testing a single user, and have successfully converted the mail messages from mbox to Maildir format, and now I am setting up the procmail tool to place the messages into the correct folder. I have been following the http://wiki.dovecot.org/Migration/MailFormat formula, but now have a question. New Messages are now being placed into the ~user/Maildir/new folder. However, when I attempt to retrieve those messages, Dovecot does not find them. Why not? -- Albert E. Whale, CHS CISA CISSP Sr. Security, Network, Risk Assessment and Systems Consultant ------------------------------------------------------------------------ ABS Computer Technology, Inc. <http://www.ABS-CompTech.com> - Email, Internet and Security Consultants SPAMZapper <http://www.Spam-Zapper.com> - No-JunkMail.com <http://www.No-JunkMail.com> - *True Spam Elimination*.

3 5

[Dovecot] Possible header parsing problem
by Eric Stadtherr 28 Oct '08

28 Oct '08

Hi, I ran into a problem wherein my mail client (RoundCube) would not display a message from a Dovecot IMAP server (claiming that the message had no content). The raw source of the message looked fine, but the body structure returned by Dovecot only had the first text/plain part and not the alternative text/html part. The message looks like: ... headers removed ... X-Mailer: Lotus Notes Release 6.5.1 January 21, 2004 Message-ID: <...> From: user(a)host.domain Date: Mon, 20 Oct 2008 14:15:55 -0600 Content-Type: multipart/alternative; boundary="=_alternative 006F3A73872574E8_=" This is a multipart message in MIME format. --=_alternative 006F3A73872574E8_= Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset=us-ascii blah blah blah --=_alternative 006F3A73872574E8_= Content-Transfer-Encoding: 7bit Content-Type: text/html; charset=us-ascii <br><font size=2 face="sans-serif">blah blah blah in HTML</font> --=_alternative 006F3A73872574E8_=-- I did a little bit of tracing through the parsing code (message-header-parser.c:message_parse_header_next()) and it appeared that the boundary in the Content-Type header was not parsed correctly, evidently because the header line was folded in the middle of the boundary string. RFC 822 appears to allow folding in a quoted string like this (§3.3 "quoted-string"), so I'm curious whether the parsing is working correctly. Thanks for your help! Here is my Dovecot information: version: 1.1.4 "dovecot -n" output: # 1.1.4: /usr/local/etc/dovecot.conf Warning: fd limit 256 is lower than what Dovecot can use under full load (more than 384). Either grow the limit or change login_max_processes_count and max_mail_processes settings base_dir: /var/dovecot/ info_log_path: /var/log/dovecot.log listen: *, [::] ssl_cert_file: /System/Library/OpenSSL/certs/imapd.pem ssl_key_file: /System/Library/OpenSSL/certs/privkey.out login_dir: /var/dovecot/login login_executable: /usr/local/libexec/dovecot/imap-login max_mail_processes: 256 mail_location: maildir:%h/Maildir namespace: type: private separator: / inbox: yes list: yes subscriptions: yes namespace: type: shared separator: / prefix: Shared/ location: maildir:/Users/Shared/Maildir list: yes subscriptions: yes auth default: passdb: driver: pam args: imap userdb: driver: passwd -- *Eric Stadtherr* estadtherr(a)gmail.com <mailto:estadtherr@gmail.com>

3 9

[Dovecot] Gah, pop3 falling over
by Brandon Lamb 27 Oct '08

27 Oct '08

Why would I be seeing a million of these? dovecot: 2008-10-27 09:12:33 Warning: chdir(/mail/mail/domain/u/username/) blocked for 18 secs Two servers were working fine and then all of a sudden this morning bam 500 load and theres a million dovecots and tons of these lines in the logs. It is like everyone gets up at exactly 8:30 and hits the pop3 server at once. Anyway, dovecot 1.1.5, nfs mount, debian lenny/sid amd64, 2.6.26-1-amd64 i had the performance mode options for login configured, i just set back to the single process per login though, I think that hasnt fallen over that way but I really dont remember anymore. I included the dovecot -n using the suggest performance login settings? Do I have something totally out of whack? # 1.1.5: /etc/dovecot/dovecot.conf base_dir: /var/run/dovecot/ log_path: /var/log/dovecot/dovecot.log info_log_path: /var/log/dovecot/info.log log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap pop3 listen(default): 208.200.248.2 208.200.248.7 listen(imap): 208.200.248.2 208.200.248.7 listen(pop3): 208.200.248.2 disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login login_greeting: Hello there. login_log_format_elements: <%u> <%r> login_log_format: %s login_process_per_connection: no login_process_size: 128 login_processes_count: 4 login_max_processes_count: 8 login_max_connections: 128 valid_chroot_dirs: /mail/mail mail_max_userip_connections(default): 15 mail_max_userip_connections(imap): 15 mail_max_userip_connections(pop3): 4 verbose_proctitle: yes first_valid_uid: 8 last_valid_uid: 8 first_valid_gid: 8 last_valid_gid: 8 mail_access_groups: mail mail_privileged_group: mail mail_uid: 8 mail_gid: 8 mail_location: maildir:~/:INDEX=/dovecot-index mailbox_idle_check_interval: 60 mmap_disable: yes mail_nfs_storage: yes mail_nfs_index: yes mailbox_list_index_disable: no mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(pop3): mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 mail_log_prefix: %Ls <%u>: imap_client_workarounds(default): outlook-idle delay-newmail imap_client_workarounds(imap): outlook-idle delay-newmail imap_client_workarounds(pop3): pop3_no_flag_updates(default): no pop3_no_flag_updates(imap): no pop3_no_flag_updates(pop3): yes pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh pop3_logout_format(default): top=%t/%p, retr=%r/%b, del=%d/%m, size=%s pop3_logout_format(imap): top=%t/%p, retr=%r/%b, del=%d/%m, size=%s pop3_logout_format(pop3): retr=%r/%b, del=%d/%m, size=%s auth default: mechanisms: plain login default_realm: olypen.com cache_size: 8192 cache_ttl: 300 worker_max_count: 60 passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: prefetch userdb: driver: sql args: /etc/dovecot/dovecot-sql.conf socket: type: listen client: path: /var/run/dovecot/auth-client mode: 438 user: mail group: mail master: path: /var/run/dovecot/auth-master mode: 438 user: mail group: mail plugin: quota: maildir quota_rule: Trash:ignore quota_rule2: Sent:ignore quota_rule3: Spam:ignore quota_rule4: Archive:ignore quota_rule5: Sent Items:ignore quota_rule6: Deleted Items:ignore auth_socket_path: /var/run/dovecot/auth-master

2 3

[Dovecot] Plugin zlib not found?
by Ralf Hildebrandt 27 Oct '08

27 Oct '08

Oct 27 16:49:08 postamt dovecot: Fatal: IMAP(fwedel): Plugin zlib not found from directory /usr/local/lib/dovecot/imap Oct 27 16:49:10 postamt dovecot: Dovecot v1.1.5 starting up # ll /usr/local/lib/dovecot/imap total 128 lrwxrwxrwx 1 root staff 22 2008-10-27 16:49 lib01_acl_plugin.so -> ../lib01_acl_plugin.so lrwxrwxrwx 1 root staff 31 2008-10-27 16:49 lib02_lazy_expunge_plugin.so -> ../lib02_lazy_expunge_plugin.so lrwxrwxrwx 1 root staff 24 2008-10-27 16:49 lib10_quota_plugin.so -> ../lib10_quota_plugin.so -rw-r--r-- 1 root staff 16260 2008-10-27 16:49 lib11_imap_quota_plugin.a -rwxr-xr-x 1 root staff 924 2008-10-27 16:49 lib11_imap_quota_plugin.la -rwxr-xr-x 1 root staff 19259 2008-10-27 16:49 lib11_imap_quota_plugin.so lrwxrwxrwx 1 root staff 24 2008-10-27 16:49 lib11_trash_plugin.so -> ../lib11_trash_plugin.so lrwxrwxrwx 1 root staff 26 2008-10-27 16:49 lib20_convert_plugin.so -> ../lib20_convert_plugin.so lrwxrwxrwx 1 root staff 25 2008-10-27 16:49 lib20_expire_plugin.so -> ../lib20_expire_plugin.so lrwxrwxrwx 1 root staff 22 2008-10-27 16:49 lib20_fts_plugin.so -> ../lib20_fts_plugin.so lrwxrwxrwx 1 root staff 27 2008-10-27 16:49 lib20_mail_log_plugin.so -> ../lib20_mail_log_plugin.so lrwxrwxrwx 1 root staff 29 2008-10-27 16:49 lib20_mbox_snarf_plugin.so -> ../lib20_mbox_snarf_plugin.so -rw-r--r-- 1 root staff 79984 2008-07-21 12:09 lib20_zlib_plugin.a -rwxr-xr-x 1 root staff 892 2008-07-21 12:09 lib20_zlib_plugin.la lrwxrwxrwx 1 root staff 23 2008-10-27 16:49 lib20_zlib_plugin.so -> ../lib20_zlib_plugin.so lrwxrwxrwx 1 root staff 28 2008-10-27 16:49 lib21_fts_squat_plugin.so -> ../lib21_fts_squat_plugin.so -- Ralf Hildebrandt (Ralf.Hildebrandt(a)charite.de) snickebo(a)charite.de Postfix - Einrichtung, Betrieb und Wartung Tel. +49 (0)30-450 570-155 http://www.arschkrebs.de I'm looking for a job Netzwerkgrundlagen anhand Windows lernen zu wollen ist doch wie seine ersten sexuellen Erfahrungen mit einer Prostituierten zu sammlen: Die Leidenschaft fehlt, das wirklich Wichtige lernt man dabei nicht, und die Chance sich einen Sch�dling einzufangen ist hoch. (Lukas Graf in d.c.s.m)

1 1

[Dovecot] Released v1.1.5 and v1.2.alpha3
by Timo Sirainen 27 Oct '08

27 Oct '08

http://dovecot.org/releases/1.1/dovecot-1.1.5.tar.gz http://dovecot.org/releases/1.1/dovecot-1.1.5.tar.gz.sig http://dovecot.org/releases/1.2/alpha/dovecot-1.2.alpha3.tar.gz http://dovecot.org/releases/1.2/alpha/dovecot-1.2.alpha3.tar.gz.sig A combined release announcement for a change. :) Largest changes since v1.1.4: * Dovecot prints an informational message about authentication problems at startup. The message goes away after the first successful authentication. This hopefully reduces the number of "Why doesn't my authentication work?" questions. + Maildir/dbox: Try harder to assign unique UIDVALIDITY values to mailboxes to avoid potential problems when recreating or renaming mailboxes. The UIDVALIDITY is tracked using dovecot-uidvalidity* files in the mail root directory. + Many logging improvements - In some conditions Dovecot could have stopped using existing cache file and never used it again until it was deleted. - pop3 + Maildir: Make sure virtual sizes are always written to dovecot-uidlist. This way if the indexes are lost Dovecot will never do a huge amount of work to recalculate them. - mbox: Fixed listing mailboxes in namespaces with prefix beginning with '~' or '/' (i.e. UW-IMAP compatibility namespaces didn't work). - dict quota: Don't crash when recalculating quota (when quota warnings enabled). - Fixes to handling "out of disk space/quota" failures. - Blocking passdbs/userdbs (e.g. PAM, MySQL) could have failed lookups sometimes when auth_worker_max_request_count was non-zero. - Fixed compiling with OpenBSD Largest changes since v1.2.alpha2: + Added userdb checkpassword (by Sascha Wilde) + Autocreate plugin: http://wiki.dovecot.org/Plugins/Autocreate + Listescape plugin: http://wiki.dovecot.org/Plugins/Listescape - All the same fixes as for v1.1.5 I was thinking about waiting for Kolab people's work for shared mailbox support to get done, get that code to v1.2 tree and then release v1.2.beta1 with feature freeze.

8 11

Re: [Dovecot] Fwd: Re: Problem with quota dovecot as lda and mysql [claudio.prono@atpss.net]
by Claudio Prono 27 Oct '08

27 Oct '08

Thank u, i have read all in that guide, but nothing. I have made a test, with dovecot 1.0.14, with the same configuration the quota works... now i am really confused... deliver(test2(a)mediaservice.pri): Dec 04 04:30:43 Info: msgid=<4905A6AD.8060008(a)atpss.net>: save failed to INBOX: Quota exceeded Any problem or difference with quota from version 1.0.x to 1.1.x ?? Any suggestion is welcome... Claudio. Quey ha scritto: > Have a look at http://kb.ausics.net/pf.php > It might offer some help > > ------------------------------------------------------------------------ > > Oggetto: > Re: [Dovecot] Problem with quota dovecot as lda and mysql > Da: > Claudio Prono <claudio.prono(a)atpss.net> > Data: > Mon, 27 Oct 2008 11:19:11 +0100 > A: > Dovecot Mailing List <dovecot(a)dovecot.org> > > A: > Dovecot Mailing List <dovecot(a)dovecot.org> > > > If can be useful, that is the debug of a send mail to the same mailbox: > > deliver(test(a)test.com): Oct 27 12:15:39 Info: Loading modules from > directory: /usr/lib/dovecot/modules/lda > deliver(test(a)test.com): Oct 27 12:15:39 Info: Module loaded: > /usr/lib/dovecot/modules/lda/lib10_quota_plugin.so > deliver(test(a)test.com): Oct 27 12:15:39 Info: auth input: test(a)test.com > deliver(test(a)test.com): Oct 27 12:15:39 Info: auth input: > maildir=test.com/test@test.com/ > deliver(test(a)test.com): Oct 27 12:15:39 Info: auth input: uid=51 > deliver(test(a)test.com): Oct 27 12:15:39 Info: auth input: gid=51 > deliver(test(a)test.com): Oct 27 12:15:39 Info: auth input: > quota=dirsize:storage=15000 > deliver(test(a)test.com): Oct 27 12:15:39 Info: Quota root: > name=storage=15000 backend=dirsize args= > deliver(test(a)test.com): Oct 27 12:15:39 Info: maildir: > data=/var/mail/virtual/test.com/test@test.com > deliver(test(a)test.com): Oct 27 12:15:39 Info: maildir++: > root=/var/mail/virtual/test.com/test@test.com, index=, control=, > inbox=/var/mail/virtual/test.com/test@test.com > deliver(test(a)test.com): Oct 27 12:15:40 Info: > msgid=<490594E1.5000802(a)atpss.net>: saved mail to INBOX > > the line with quota=dirsize:storage=15000 is correct? For 15Mb? > > Thank u, > > Claudio. > > > Claudio Prono ha scritto: > >> Hello to all, >> >> That is my situation: I am trying to use dovecot as LDA with postfix, >> mysql e postfixadmin. So, all the users are stored in mysql, with quota >> password and all other things. All works properly, except for quota. I >> am trying to do some tests, but is not clear to me how to debug that >> problem. >> >> Scenario: user with 15 Mb of quota. >> >> That is my dovecot.conf (dovecot version 1.1.3 on OpenSuSE 11.0): >> >> dovecot -n >> # 1.1.3: /etc/dovecot/dovecot.conf >> log_path: /var/log/dovecot-err.log >> info_log_path: /var/log/dovecot-inf.log >> protocols: imap imaps pop3 pop3s >> disable_plaintext_auth: no >> login_dir: /var/run/dovecot/login >> login_executable(default): /usr/lib/dovecot/imap-login >> login_executable(imap): /usr/lib/dovecot/imap-login >> login_executable(pop3): /usr/lib/dovecot/pop3-login >> first_valid_uid: 51 >> last_valid_uid: 51 >> first_valid_gid: 51 >> last_valid_gid: 51 >> mail_location: maildir:/var/mail/virtual/%d/%u >> mail_executable(default): /usr/lib/dovecot/imap >> mail_executable(imap): /usr/lib/dovecot/imap >> mail_executable(pop3): /usr/lib/dovecot/pop3 >> mail_plugins(default): quota imap_quota >> mail_plugins(imap): quota imap_quota >> mail_plugins(pop3): quota >> mail_plugin_dir(default): /usr/lib/dovecot/modules/imap >> mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap >> mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 >> imap_client_workarounds(default): outlook-idle >> imap_client_workarounds(imap): outlook-idle >> imap_client_workarounds(pop3): >> pop3_uidl_format(default): %08Xu%08Xv >> pop3_uidl_format(imap): %08Xu%08Xv >> pop3_uidl_format(pop3): %Mf >> auth default: >> passdb: >> driver: sql >> args: /etc/dovecot/dovecot-mysql.conf >> userdb: >> driver: passwd >> userdb: >> driver: sql >> args: /etc/dovecot/dovecot-mysql.conf >> socket: >> type: listen >> master: >> path: /var/run/dovecot/auth-master >> mode: 384 >> plugin: >> quota: maildir >> quota: maildir:user quota >> >> And this is my dovecot-mysql.conf: >> >> driver = mysql >> connect = host=127.0.0.1 port=3306 user=postfix password=XXXXXXXXXXX >> dbname=postfix >> default_pass_scheme = MD5-CRYPT >> >> password_query = SELECT username as user, password, >> '/var/mail/virtual/%d/%u' as >> userdb_home,'maildir:/var/mail/virtual/%d/%u' , 51 as userdb_uid, 51 as >> userdb_gid FROM mailbox WHERE username = '%n@%d' AND active = '1' >> >> user_query = SELECT maildir, 51 AS uid, 51 AS gid, >> concat('dirsize:storage=', ROUND( mailbox.quota / 1024 ) ) AS quota FROM >> mailbox WHERE username = '%u' AND active = '1' >> >> But.. when i send a mail that "overquota" the mailbox, nothing happens, >> the mail is normally delivered to maildir and the quota is not considered. >> >> An example of the process: >> >> I take a mailbox with 15Mb of quota, like test(a)test.com: >> >> Email Nome Quota (MB) Ultima modifica Attivo >> test(a)test.com test 15 2008-10-27 11:47:43 SI >> <edit-active.php?username=test%40test.com&domain=test.com> modifica >> <edit-mailbox.php?username=test%40test.com&domain=test.com> cancella >> <delete.php?table=mailbox&delete=test%40test.com&domain=test.com> >> >> >> I try to send an email to it: >> >> Oct 27 11:48:53 dns postfix/smtpd[3489]: connect from >> cla.mediaservice.pri[192.168.87.70] >> Oct 27 11:48:53 dns postfix/smtpd[3489]: D8DF2837: >> client=cla.mediaservice.pri[192.168.87.70] >> Oct 27 11:48:53 dns postfix/cleanup[3494]: D8DF2837: >> message-id=<49058EB2.5080208(a)atpss.net> >> Oct 27 11:48:58 dns postfix/qmgr[2636]: D8DF2837: >> from=<claudio.prono(a)atpss.net>, size=7716371, nrcpt=1 (queue active) >> Oct 27 11:48:58 dns postfix/smtpd[3489]: disconnect from >> cla.mediaservice.pri[192.168.87.70] >> Oct 27 11:48:59 dns postfix/pipe[3496]: D8DF2837: to=<test(a)test.com>, >> relay=dovecot, delay=5.6, delays=4.9/0/0/0.71, dsn=2.0.0, status=sent >> (delivered via dovecot service) >> Oct 27 11:48:59 dns postfix/qmgr[2636]: D8DF2837: removed >> >> Fine, the mail was put into mailbox. >> >> dns:/var/mail/virtual/test.com/test@test.com # du -h >> 0 ./cur >> 7.3M ./new >> 0 ./tmp >> 7.3M . >> >> Now i try to put in overquota the mailbox with other 2 mails of the same >> dimension. >> >> First one: >> >> Oct 27 11:50:52 dns postfix/smtpd[3684]: connect from >> cla.mediaservice.pri[192.168.87.70] >> Oct 27 11:50:52 dns postfix/smtpd[3684]: 220D4837: >> client=cla.mediaservice.pri[192.168.87.70] >> Oct 27 11:50:52 dns postfix/cleanup[3689]: 220D4837: >> message-id=<49058F28.8050004(a)atpss.net> >> Oct 27 11:51:13 dns postfix/qmgr[2636]: 220D4837: >> from=<claudio.prono(a)atpss.net>, size=7716372, nrcpt=1 (queue active) >> Oct 27 11:51:13 dns postfix/smtpd[3684]: disconnect from >> cla.mediaservice.pri[192.168.87.70] >> Oct 27 11:51:14 dns postfix/pipe[3691]: 220D4837: to=<test(a)test.com>, >> relay=dovecot, delay=22, delays=22/0.01/0/0.56, dsn=2.0.0, status=sent >> (delivered via dovecot service) >> Oct 27 11:51:14 dns postfix/qmgr[2636]: 220D4837: removed >> >> dns:/var/mail/virtual/test.com/test@test.com # du -h >> 0 ./cur >> 15M ./new >> 0 ./tmp >> 15M . >> >> That's ok, the quota is 15Mb, next mail... >> >> Oct 27 11:52:27 dns postfix/smtpd[3684]: connect from >> cla.mediaservice.pri[192.168.87.70] >> Oct 27 11:52:27 dns postfix/smtpd[3684]: 4441D837: >> client=cla.mediaservice.pri[192.168.87.70] >> Oct 27 11:52:27 dns postfix/cleanup[3689]: 4441D837: >> message-id=<49058F87.4010600(a)atpss.net> >> Oct 27 11:52:49 dns postfix/qmgr[2636]: 4441D837: >> from=<claudio.prono(a)atpss.net>, size=7716371, nrcpt=1 (queue active) >> Oct 27 11:52:49 dns postfix/smtpd[3684]: disconnect from >> cla.mediaservice.pri[192.168.87.70] >> Oct 27 11:52:50 dns postfix/pipe[3691]: 4441D837: to=<test(a)test.com>, >> relay=dovecot, delay=23, delays=22/0.01/0/0.56, dsn=2.0.0, status=sent >> (delivered via dovecot service) >> Oct 27 11:52:50 dns postfix/qmgr[2636]: 4441D837: removed >> >> Wrong! The mail quota was not seen, and in fact... >> >> dns:/var/mail/virtual/test.com/test@test.com # du -h >> 0 ./cur >> 22M ./new >> 0 ./tmp >> 22M . >> >> Overquota is here! >> >> Any suggestion? I have already readed the quota howto of dovecot, with >> no results, all seems ok, but quota is not used... PLS HELP!!! >> >> Thank u in advance, >> >> Claudio Prono. >> >> >> > > -- ------------ Claudio Prono Systems Development @ Atpss.net Srl, Divisione Implementazione Sistemi Via San Bernardino, 17 - 10137 Torino (TO) - IT Tel +39-011.32.72.100 Fax +39-011.32.46.497 PGP Fingerprint: 75C2 4049 E23D 2FBF A65F 40DB EA5C 11AC C2B0 3647 Disclaimer: http://atpss.net/disclaimer ------------

1 1

[Dovecot] Problems with the pop3 part of dovecot
by Brandon Lamb 27 Oct '08

27 Oct '08

Hello, I originally just typed up a 5 paragraph essay on my problems but just deleted it all. basically I need to find out where to start looking to find out what is the problem with my dovecot pop3 setup. I switched from courier imap/pop3 to dovecot imap/pop3. I have had super high loads (40+ and overnight one server went to 511) and its been a nightmare fighting with this new setup for the last two weeks. I did manage to narrow the problem down to it being with the pop3 part of dovecot. I am not sure why the load keeps going so high. The first week I attributed it to users having to redownload mail and reindex (we were aware of the UIDL problem), but two weeks later one of my machines overnight went to 511. I have changed so many config options to try to make it work that I have become overwhelmed and feel like I have tried everything to get the right settings. I am running four 64bit machines with amd 9850 cpus, 4 gigs ram, the mailstore is nfs mounted, the nfs server is using xfs. Debian lenny/sid. I dont know what to do, I am almost debating going back to courier pop3 and going through the week of support calls of customers downloading mail again but that is a last ditch effort. I can understand if i just need to wait it out while things are indexed for dovecot and stuff, but machines falling over and loads of 40 to 500 just for dovecot seems not right. so, where do I start?

6 13

[Dovecot] Problem with quota dovecot as lda and mysql
by Claudio Prono 27 Oct '08

27 Oct '08

Hello to all, That is my situation: I am trying to use dovecot as LDA with postfix, mysql e postfixadmin. So, all the users are stored in mysql, with quota password and all other things. All works properly, except for quota. I am trying to do some tests, but is not clear to me how to debug that problem. Scenario: user with 15 Mb of quota. That is my dovecot.conf (dovecot version 1.1.3 on OpenSuSE 11.0): dovecot -n # 1.1.3: /etc/dovecot/dovecot.conf log_path: /var/log/dovecot-err.log info_log_path: /var/log/dovecot-inf.log protocols: imap imaps pop3 pop3s disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login first_valid_uid: 51 last_valid_uid: 51 first_valid_gid: 51 last_valid_gid: 51 mail_location: maildir:/var/mail/virtual/%d/%u mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(pop3): quota mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 imap_client_workarounds(default): outlook-idle imap_client_workarounds(imap): outlook-idle imap_client_workarounds(pop3): pop3_uidl_format(default): %08Xu%08Xv pop3_uidl_format(imap): %08Xu%08Xv pop3_uidl_format(pop3): %Mf auth default: passdb: driver: sql args: /etc/dovecot/dovecot-mysql.conf userdb: driver: passwd userdb: driver: sql args: /etc/dovecot/dovecot-mysql.conf socket: type: listen master: path: /var/run/dovecot/auth-master mode: 384 plugin: quota: maildir quota: maildir:user quota And this is my dovecot-mysql.conf: driver = mysql connect = host=127.0.0.1 port=3306 user=postfix password=XXXXXXXXXXX dbname=postfix default_pass_scheme = MD5-CRYPT password_query = SELECT username as user, password, '/var/mail/virtual/%d/%u' as userdb_home,'maildir:/var/mail/virtual/%d/%u' , 51 as userdb_uid, 51 as userdb_gid FROM mailbox WHERE username = '%n@%d' AND active = '1' user_query = SELECT maildir, 51 AS uid, 51 AS gid, concat('dirsize:storage=', ROUND( mailbox.quota / 1024 ) ) AS quota FROM mailbox WHERE username = '%u' AND active = '1' But.. when i send a mail that "overquota" the mailbox, nothing happens, the mail is normally delivered to maildir and the quota is not considered. An example of the process: I take a mailbox with 15Mb of quota, like test(a)test.com: Email Nome Quota (MB) Ultima modifica Attivo test(a)test.com test 15 2008-10-27 11:47:43 SI <edit-active.php?username=test%40test.com&domain=test.com> modifica <edit-mailbox.php?username=test%40test.com&domain=test.com> cancella <delete.php?table=mailbox&delete=test%40test.com&domain=test.com> I try to send an email to it: Oct 27 11:48:53 dns postfix/smtpd[3489]: connect from cla.mediaservice.pri[192.168.87.70] Oct 27 11:48:53 dns postfix/smtpd[3489]: D8DF2837: client=cla.mediaservice.pri[192.168.87.70] Oct 27 11:48:53 dns postfix/cleanup[3494]: D8DF2837: message-id=<49058EB2.5080208(a)atpss.net> Oct 27 11:48:58 dns postfix/qmgr[2636]: D8DF2837: from=<claudio.prono(a)atpss.net>, size=7716371, nrcpt=1 (queue active) Oct 27 11:48:58 dns postfix/smtpd[3489]: disconnect from cla.mediaservice.pri[192.168.87.70] Oct 27 11:48:59 dns postfix/pipe[3496]: D8DF2837: to=<test(a)test.com>, relay=dovecot, delay=5.6, delays=4.9/0/0/0.71, dsn=2.0.0, status=sent (delivered via dovecot service) Oct 27 11:48:59 dns postfix/qmgr[2636]: D8DF2837: removed Fine, the mail was put into mailbox. dns:/var/mail/virtual/test.com/test@test.com # du -h 0 ./cur 7.3M ./new 0 ./tmp 7.3M . Now i try to put in overquota the mailbox with other 2 mails of the same dimension. First one: Oct 27 11:50:52 dns postfix/smtpd[3684]: connect from cla.mediaservice.pri[192.168.87.70] Oct 27 11:50:52 dns postfix/smtpd[3684]: 220D4837: client=cla.mediaservice.pri[192.168.87.70] Oct 27 11:50:52 dns postfix/cleanup[3689]: 220D4837: message-id=<49058F28.8050004(a)atpss.net> Oct 27 11:51:13 dns postfix/qmgr[2636]: 220D4837: from=<claudio.prono(a)atpss.net>, size=7716372, nrcpt=1 (queue active) Oct 27 11:51:13 dns postfix/smtpd[3684]: disconnect from cla.mediaservice.pri[192.168.87.70] Oct 27 11:51:14 dns postfix/pipe[3691]: 220D4837: to=<test(a)test.com>, relay=dovecot, delay=22, delays=22/0.01/0/0.56, dsn=2.0.0, status=sent (delivered via dovecot service) Oct 27 11:51:14 dns postfix/qmgr[2636]: 220D4837: removed dns:/var/mail/virtual/test.com/test@test.com # du -h 0 ./cur 15M ./new 0 ./tmp 15M . That's ok, the quota is 15Mb, next mail... Oct 27 11:52:27 dns postfix/smtpd[3684]: connect from cla.mediaservice.pri[192.168.87.70] Oct 27 11:52:27 dns postfix/smtpd[3684]: 4441D837: client=cla.mediaservice.pri[192.168.87.70] Oct 27 11:52:27 dns postfix/cleanup[3689]: 4441D837: message-id=<49058F87.4010600(a)atpss.net> Oct 27 11:52:49 dns postfix/qmgr[2636]: 4441D837: from=<claudio.prono(a)atpss.net>, size=7716371, nrcpt=1 (queue active) Oct 27 11:52:49 dns postfix/smtpd[3684]: disconnect from cla.mediaservice.pri[192.168.87.70] Oct 27 11:52:50 dns postfix/pipe[3691]: 4441D837: to=<test(a)test.com>, relay=dovecot, delay=23, delays=22/0.01/0/0.56, dsn=2.0.0, status=sent (delivered via dovecot service) Oct 27 11:52:50 dns postfix/qmgr[2636]: 4441D837: removed Wrong! The mail quota was not seen, and in fact... dns:/var/mail/virtual/test.com/test@test.com # du -h 0 ./cur 22M ./new 0 ./tmp 22M . Overquota is here! Any suggestion? I have already readed the quota howto of dovecot, with no results, all seems ok, but quota is not used... PLS HELP!!! Thank u in advance, Claudio Prono. -- ------------ Claudio Prono Systems Development @ Atpss.net Srl, Divisione Implementazione Sistemi Via San Bernardino, 17 - 10137 Torino (TO) - IT Tel +39-011.32.72.100 Fax +39-011.32.46.497 PGP Fingerprint: 75C2 4049 E23D 2FBF A65F 40DB EA5C 11AC C2B0 3647 Disclaimer: http://atpss.net/disclaimer ------------

1 1

[Dovecot] PATCH: Advertise X-REFERENCES2
by Michael M. Slusarz 26 Oct '08

26 Oct '08

Don't see any reason why X-REFERENCES2 should not be advertised in the CAPABILITY string - the wiki indicates this is a new addition for 1.2, and RFC 5256 explicitly states that the THREAD= is to be used for upwards-compatible extensions. # HG changeset patch # User root(a)bigworm.curecanti.org # Date 1225057043 21600 # Branch HEAD # Node ID 1f082281f8d4e3d364b85c08ec329cf1be7ba61f # Parent 88a6a193e2884ac882ecc75e9ae9a242acc6188f Add X-REFERENCES2 to CAPABILITY string. diff -r 88a6a193e288 -r 1f082281f8d4 configure.in --- a/configure.in Sun Oct 26 16:30:50 2008 +0200 +++ b/configure.in Sun Oct 26 15:37:23 2008 -0600 @@ -2390,7 +2390,7 @@ dnl ** capability_banner="IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE" -capability="$capability_banner SORT THREAD=REFERENCES MULTIAPPEND UNSELECT IDLE CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH SEARCHRES WITHIN CONTEXT=SEARCH" +capability="$capability_banner SORT THREAD=REFERENCES THREAD=X-REFERENCES2 MULTIAPPEND UNSELECT IDLE CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH SEARCHRES WITHIN CONTEXT=SEARCH" AC_DEFINE_UNQUOTED(CAPABILITY_STRING, "$capability", IMAP capabilities) AC_DEFINE_UNQUOTED(CAPABILITY_BANNER_STRING, "$capability_banner", IMAP capabilities advertised in banner) michael

2 1

[Dovecot] Bug? auth(default) Authentication client gave a PID of existing connection
by Brandon Lamb 26 Oct '08

26 Oct '08

Hello, My first time on this list, just switched from courier imap/pop3 system to dovecot. Imap part is great, pop3 seems to suffer, been fighting it for a week. Anyway, the reason for this post is that I have seen these pop up in my logs, and on one of my mailheads there were some 50 lines of this dovecot: 2008-10-26 09:33:54 Error: auth(default): BUG: Authentication client gave a PID 15661 of existing connection Is this really a bug or anything to be concerned with? I just installed 1.1.5. I am using Debian lenny/sid on amd64, phenom 9850 4g ram, nfs mounted maildir format xfs storage.

2 6

[Dovecot] Dovecot dies with PAM error?
by Jason Walton 26 Oct '08

26 Oct '08

Just setup a new server on the weekend with Ubuntu 8.10 beta, and Dovecot 1.1.4. Every now and then, the IMAP server dies, and won't let users authenticate. It happens about once or twice a day. In /var/log/mail.log, you can see dovecot complaining about critial errors: Oct 21 14:46:16 tachikoma dovecot: imap-login: Login: user=<jason>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, TLS Oct 21 14:46:16 tachikoma dovecot: IMAP(jason): Disconnected: Logged out bytes=769/9124 Oct 21 14:47:15 tachikoma dovecot: auth-worker(default): pam(jason,127.0.0.1): pam_start() failed: Critical error - immediate abort Oct 21 14:47:17 tachikoma dovecot: imap-login: Disconnected (auth failed, 1 attempts): user=<jason>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, TLS If I have a look at /var/log/auth.log, I see: Oct 21 14:47:15 tachikoma dovecot-auth: PAM _pam_init_handlers: error reading /etc/pam.d/dovecot Oct 21 14:47:15 tachikoma dovecot-auth: PAM _pam_init_handlers: [Critical error - immediate abort] Oct 21 14:47:15 tachikoma dovecot-auth: PAM error reading PAM configuration file Oct 21 14:47:15 tachikoma dovecot-auth: PAM pam_start: failed to initialize handlers This sounds ominous. If I try to cat /etc/pam.d/dovecot, though, the file is obviously there: jason@tachikoma:/var/log$ cat /etc/pam.d/dovecot #%PAM-1.0 @include common-auth @include common-account @include common-session And restarting dovecot seems to fix the problem. Dovecot WAS running just fine, servicing mail all day long, and then suddenly it won't read the PAM config file, and then it won't let anyone log in until I log in and kill it. Any ideas? My IMAP client is either Thunderbird or Roundcube, if that's relevant.

2 2

[Dovecot] Fatal failure in auth-worker with dovecot-1.1.5
by arvids 26 Oct '08

26 Oct '08

Hello, after upgrade from dovecot-1.1.3 to dovecot-1.1.5 I am getting Fatal failures in auth-worker: Oct 26 14:00:31 host dovecot: auth(default): new auth connection: pid=27526 Oct 26 14:00:31 host dovecot: auth(default): client in: AUTH^I1^IDIGEST-MD5^Iservice=smtp Oct 26 14:00:31 host dovecot: auth(default): client out: CONT^I1^IcmVhbG09IiIsbm9uY2U9IitTWElHWnJabHFkb0hoa0ttRktLdEE9PSIscW9wPSJhdXRoIixjaGFyc2V0PSJ1dGYtOCIsYWxnb3JpdGhtPSJtZDUtc2VzcyI= Oct 26 14:00:31 host dovecot: auth(default): client in: CONT<hidden> Oct 26 14:00:31 host dovecot: auth(default): cache(me): expired Oct 26 14:00:31 host dovecot: auth-worker(default): sql(me): query: SELECT user, clear as password, home as userdb_home, uid as userdb_uid, gid as userdb_gid, concat('*:storage=',quota_kb,' :messages=',quota_num) AS userdb_quota_rule,concat('storage=',round(quota_kb*0.90),' /etc/postfix/quotawarn.sh storage 90') AS userdb_quota_warning, concat('messages=',round(quota_num*0.90) ,' /etc/postfix/quotawarn.sh messages 90') AS userdb_quota_warning2 FROM users WHERE user = 'me' Oct 26 14:00:31 host dovecot: Fatal: auth-worker(default): digest_md5_generate(): username not given Oct 26 14:00:31 host dovecot: child 24174 (auth-worker) returned error 89 (Fatal failure) Oct 26 14:00:31 host dovecot: auth(default): worker-server(me): Aborted: Worker process died unexpectedly Oct 26 14:00:31 host dovecot: auth(default): cache(me): hit: <hidden>^Iuser=me^Iuserdb_home=/var/vmail/me^Iuserdb_uid=95^Iuserdb_gid=95^Iuserdb_quota_rule=*:storage=5000000:messages=50000^I userdb_quota_warning=storage=4500000 /etc/postfix/quotawarn.sh storage 90^Iuserdb_quota_warning2=messages=45000 /etc/postfix/quotawarn.sh messages 90 Oct 26 14:00:31 host dovecot: auth(default): passdb(me): Fallbacking to expired data from cache Oct 26 14:00:31 host dovecot: auth(default): client out: CONT^I1^IcnNwYXV0aD03MmIzMDI3NzI5MmI0N2VlZTRiMTdiZmExODhmODE0Zg== Oct 26 14:00:31 host dovecot: auth(default): client in: CONT<hidden> Oct 26 14:00:31 host dovecot: auth(default): client out: OK^I1^Iuser=me There were no such errors with exactly the same config in dovecot-1.1.3. I can not reproduce it, but it happens quite often and with different clients - IMAP and POP3, clients with expired auth data in cache and clients wihout auth data in cache. Here is my dovecot -n output: # 1.1.5: /usr/local/dovecot/etc/dovecot.conf base_dir: /var/run/dovecot/ syslog_facility: local7 protocols: pop3 imap ssl_cert_file: /etc/postfix/host-cert.pem ssl_key_file: /etc/postfix/host-key.pem disable_plaintext_auth: no verbose_ssl: yes login_dir: /var/run/dovecot/login login_executable(default): /usr/local/dovecot/libexec/dovecot/imap-login login_executable(imap): /usr/local/dovecot/libexec/dovecot/imap-login login_executable(pop3): /usr/local/dovecot/libexec/dovecot/pop3-login login_greeting: Server. login_process_per_connection: no login_processes_count: 5 login_max_processes_count: 32 verbose_proctitle: yes first_valid_uid: 95 first_valid_gid: 95 mail_uid: 95 mail_gid: 95 mail_location: maildir:~/Maildir mail_debug: yes fsync_disable: yes mail_executable(default): /usr/local/dovecot/libexec/dovecot/imap mail_executable(imap): /usr/local/dovecot/libexec/dovecot/imap mail_executable(pop3): /usr/local/dovecot/libexec/dovecot/pop3 mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(pop3): quota mail_plugin_dir(default): /usr/local/dovecot/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/dovecot/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/dovecot/lib/dovecot/pop3 imap_client_workarounds(default): delay-newmail imap_client_workarounds(imap): delay-newmail imap_client_workarounds(pop3): pop3_enable_last(default): no pop3_enable_last(imap): no pop3_enable_last(pop3): yes pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh namespace: type: private separator: . inbox: yes list: yes subscriptions: yes auth default: mechanisms: plain login digest-md5 cram-md5 apop cache_size: 1024 cache_ttl: 600 cache_negative_ttl: 60 user: doveauth verbose: yes debug: yes passdb: driver: sql args: /usr/local/dovecot/etc/dovecot-sql.conf userdb: driver: prefetch userdb: driver: sql args: /usr/local/dovecot/etc/dovecot-sql.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vmail group: vmail plugin: quota: dict:::proxy:/var/run/dovecot/dict-server:quotadict dict: quotadict: mysql:/usr/local/dovecot/etc/dovecot-sql-dict-quota.conf Regards, Arvids

2 1

[Dovecot] can not compile 1.1.5 with BDB
by LÉVAI Dániel 25 Oct '08

25 Oct '08

Hi! I'm trying to use dovecot-1.1.5 with Berkley DB 4.6.21 on OpenBSD. While compiling I get this: gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/lib -I../../src/lib-sql \ -DPKG_RUNDIR=\""/var/run/dovecot"\" -I/usr/local/include -std=gnu99\ -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations \ -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast \ -fstack-protector -MT dict-db.o -MD -MP -MF .deps/dict-db.Tpo -c -o \ dict-db.o dict-db.c dict-db.c:15: error: syntax error before "DB_ENV" dict-db.c:24: error: syntax error before "DBC" dict-db.c:39: error: syntax error before numeric constant dict-db.c: In function `db_dict_init': dict-db.c:69: error: `tid' undeclared (first use in this function) dict-db.c:69: error: (Each undeclared identifier is reported only once dict-db.c:69: error: for each function it appears in.) dict-db.c:79: warning: implicit declaration of function `db_env_create' dict-db.c:79: error: structure has no member named `db_env' dict-db.c:81: warning: implicit declaration of function `db_strerror' dict-db.c:81: warning: format argument is not a pointer (arg 2) dict-db.c:86: error: structure has no member named `db_env' dict-db.c:86: error: structure has no member named `db_env' dict-db.c:86: error: `stderr' undeclared (first use in this function) dict-db.c:87: error: structure has no member named `db_env' dict-db.c:87: error: structure has no member named `db_env' dict-db.c:93: error: structure has no member named `db_env' dict-db.c:93: error: structure has no member named `db_env' dict-db.c:93: error: `DB_CREATE' undeclared (first use in this function) dict-db.c:94: error: `DB_INIT_MPOOL' undeclared (first use in this function) dict-db.c:94: error: `DB_INIT_TXN' undeclared (first use in this function) dict-db.c:100: error: structure has no member named `db_env' dict-db.c:100: error: structure has no member named `db_env' dict-db.c:107: warning: implicit declaration of function `db_create' dict-db.c:107: error: structure has no member named `db_env' dict-db.c:109: warning: format argument is not a pointer (arg 2) dict-db.c:113: error: structure has no member named `set_errfile' dict-db.c:114: error: structure has no member named `set_errpfx' dict-db.c:116: error: structure has no member named `db_env' dict-db.c:118: warning: format argument is not a pointer (arg 2) dict-db.c:122: error: structure has no member named `set_errfile' dict-db.c:123: error: structure has no member named `set_errpfx' dict-db.c:125: error: structure has no member named `open' dict-db.c:131: error: structure has no member named `set_flags' dict-db.c:131: error: `DB_DUP' undeclared (first use in this function) dict-db.c:141: error: structure has no member named `set_bt_compare' dict-db.c:148: error: structure has no member named `open' dict-db.c:154: error: structure has no member named `associate' dict-db.c: In function `db_dict_deinit': dict-db.c:168: error: too many arguments to function dict-db.c:170: error: too many arguments to function dict-db.c: In function `db_dict_iterate_set': dict-db.c:180: error: `DB_NOTFOUND' undeclared (first use in this function) dict-db.c: In function `db_dict_lookup': dict-db.c:218: warning: passing arg 4 of pointer to function makes integer from pointer without a cast dict-db.c:218: error: too many arguments to function dict-db.c:219: error: `DB_NOTFOUND' undeclared (first use in this function) dict-db.c: In function `db_dict_iterate_next': dict-db.c:250: error: structure has no member named `cursor' dict-db.c:250: error: structure has no member named `cursor' dict-db.c:252: error: `DB_NEXT' undeclared (first use in this function) dict-db.c:262: error: structure has no member named `cursor' dict-db.c:262: error: structure has no member named `cursor' dict-db.c: In function `db_dict_iterate_first': dict-db.c:285: error: structure has no member named `cursor' dict-db.c:285: error: structure has no member named `cursor' dict-db.c:287: error: structure has no member named `cursor' dict-db.c:287: error: structure has no member named `cursor' dict-db.c:292: error: structure has no member named `cursor' dict-db.c:292: error: structure has no member named `cursor' dict-db.c:293: error: `DB_SET_RANGE' undeclared (first use in this function) dict-db.c: In function `db_dict_iterate_init': dict-db.c:311: error: structure has no member named `cursor' dict-db.c: In function `db_dict_iterate_deinit': dict-db.c:335: error: structure has no member named `cursor' dict-db.c:335: error: structure has no member named `cursor' dict-db.c: In function `db_dict_transaction_init': dict-db.c:349: error: structure has no member named `db_env' dict-db.c:349: error: structure has no member named `db_env' dict-db.c:349: error: structure has no member named `tid' dict-db.c: In function `db_dict_transaction_commit': dict-db.c:360: error: structure has no member named `tid' dict-db.c:360: error: structure has no member named `tid' dict-db.c: In function `db_dict_transaction_rollback': dict-db.c:370: error: structure has no member named `tid' dict-db.c:370: error: structure has no member named `tid' dict-db.c: In function `db_dict_set': dict-db.c:398: error: structure has no member named `tid' dict-db.c:398: warning: passing arg 4 of pointer to function makes integer from pointer without a cast dict-db.c:398: error: too many arguments to function dict-db.c: In function `db_dict_unset': dict-db.c:413: error: structure has no member named `tid' dict-db.c:413: warning: passing arg 3 of pointer to function makes integer from pointer without a cast dict-db.c:413: error: too many arguments to function *** Error code 1 Stop in /home/daniell/dovecot/dovecot-1.1.5/src/lib-dict (line 92 of /usr/share/mk/sys.mk). *** Error code 1 Stop in /home/daniell/dovecot/dovecot-1.1.5/src (line 300 of Makefile). *** Error code 1 Stop in /home/daniell/dovecot/dovecot-1.1.5 (line 404 of Makefile). *** Error code 1 Stop in /home/daniell/dovecot/dovecot-1.1.5 (line 257 of Makefile). My intention is to configure the expire plugin with a db: backend, but I got stuck with this? Anyone have a clue? Thanks! Daniel -- LEVAI Daniel PGP key ID = 0x4AC0A4B1 Key fingerprint = D037 03B9 C12D D338 4412 2D83 1373 917A 4AC0 A4B1

2 2

[Dovecot] dovecot:mail storage creation failed with mail location:mbox:/HOME_DIRECTORY_USED_BUT_NOT_GIVEN_USERDB/mail:INBOX=/var/spool/mail/test1@poste.tn
by wafa hjiri 25 Oct '08

25 Oct '08

Hello I am working in a project and during my work an error has appeared in the use of the dovecot e mail server Squirrelmail an error occured:ERROR:Connection dropped by IMAP server and in the log mail we find: mail storage creation failed with mail location:mbox:/HOME_DIRECTORY_USED_BUT_NOT_GIVEN_USERDB/mail:INBOX=/var/spool/mail/test1@poste.tn child 5757(imap) returned error 89 can you give me a help i am waiting your response impatiently thanks

2 1

[Dovecot] Maildir connection issues
by Albert E. Whale 25 Oct '08

25 Oct '08

I recently am attempting a mbox to Maildir conversion, initially for a single email address, and then for everyone. To further this diagnostic here is the dovecot -n: dovecot -n # 1.1.4: /etc/dovecot.conf base_dir: /var/run/dovecot/ protocols: imap pop3 ssl_disable: yes disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login login_greeting: SpamZapper Email ready. mail_max_userip_connections(default): 10 mail_max_userip_connections(imap): 10 mail_max_userip_connections(pop3): 3 mail_privileged_group: mail mail_location: mbox:~/mail:INBOX=/var/spool/mail/%u mmap_disable: yes mail_nfs_storage: yes mail_nfs_index: yes lock_method: dotlock mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/imap mail_plugin_dir(imap): /usr/lib/dovecot/imap mail_plugin_dir(pop3): /usr/lib/dovecot/pop3 pop3_uidl_format(default): %08Xu%08Xv pop3_uidl_format(imap): %08Xu%08Xv pop3_uidl_format(pop3): %08Xv%08Xu auth default: username_format: %Lu passdb: driver: passwd-file args: /home/dovecot.passwd passdb: driver: pam userdb: driver: passwd ns6.ABS-CompTech.com root [/root] ll /home/dovecot.passwd -rw-r--r-- 1 418 418 95 Oct 22 22:18 /home/dovecot.passwd The problem I am having is that the user health cannot get new email messages. Suggestions? -- Albert E. Whale, CHS CISA CISSP Sr. Security, Network, Risk Assessment and Systems Consultant ------------------------------------------------------------------------ ABS Computer Technology, Inc. <http://www.ABS-CompTech.com> - Email, Internet and Security Consultants SPAMZapper <http://www.Spam-Zapper.com> - No-JunkMail.com <http://www.No-JunkMail.com> - *True Spam Elimination*.

3 4

[Dovecot] Bug in QRESYNC SELECT/EXAMINE behavior
by Michael M. Slusarz 24 Oct '08

24 Oct '08

RFC 5162 [3.1] states that a QRESYNC should return all changes in a SELECT/EXAMINE since the given modseq. In the following case, it looks like there is an off-by-1 error somewhere: C: A64 SELECT "TestMailboxTest" (QRESYNC (1224531494 6 1,3:5)) [MMS: MODSEQ given is 6] S: * OK [CLOSED] S: * FLAGS (\Answered \Flagged \Deleted \Seen \Draft) S: * OK [PERMANENTFLAGS (\Answered \Flagged \Deleted \Seen \Draft \*)] Flags permitted. S: * 4 EXISTS S: * 0 RECENT S: * OK [UNSEEN 1] First unseen. S: * OK [UIDVALIDITY 1224531494] UIDs valid S: * OK [UIDNEXT 6] Predicted next UID S: * OK [HIGHESTMODSEQ 6] [MMS: HIGHESTMODSEQ is 6 - the same as our cache, so there should be no need for an update] S: * 2 FETCH (MODSEQ (6) UID 3 FLAGS (\Deleted)) [MMS: ...but we get this FETCH that contains the MODSEQ ID of 6, which we have already told the server we are aware of] S: A64 OK [READ-WRITE] Select completed. In other words, I don't think that "2 FETCH ..." should be in the server response - it is duplicative information as to what is already cached on the client. michael

2 1