- dovecot - dovecot.org

[Dovecot] Roadmap
by Jonathan Siegle 04 Dec '08

04 Dec '08

I've been running 1.2alpha3 for weeks now without issue. However, some people in my testing department object to even testing "alpha" code. Are there specific features/bugs that need resolved before alpha reaches beta? Thanks, Jonathan

2 1

[Dovecot] Dovecot authenticating to multiple kerberos realms
by Romer Ventura 04 Dec '08

04 Dec '08

Hello, I got Postfix, Dovecot 1.1.7 configure to use pam and the pam.d/dovecot file is configure to use pam_krb5 module. Everything is working with no problems, but I am finding that the user must type the domain part in uppercase in order to successfully authenticate. So I am wondering if there is any way for the user to login as user1(a)domain.com instead of user1@DOMAIN.COM...? Any ideas..? Thanks

2 2

[Dovecot] Antispam plugin + scriptsieve
by Allan Cassaro 03 Dec '08

03 Dec '08

Hi, I wrote a little python program that works with antispam plugin, to create or remove sieve rules based on "From:" of any e-mail that is moved to some folder configured in dovecot.conf. He works fine with "Felamimail" the email program of "eGroupware". After setup, is very simple: If an user move a message to "blocked" folder, is appended a rule in the script sieve of this user. If the message is deleted or moved out that folder, the rule is removed too. The setup is very simple: (after setup antispam plugin) Change this in dovecot.conf: protocol imap { mail_plugins = antispam } plugin { antispam_spam = Blocked antispam_mail_sendmail = /usr/libexec/dovecot/blockthis.py antispam_mail_sendmail_args = -u;%u antispam_mail_spam = -a antispam_mail_notspam = -d } Hooo... this script create a "include global script" statament in script sieve... If you don't want this feature, just comment this 2 lines: sievelist.append('require ["fileinto", "include"];\n') sievelist.append('include :global "global.sieve";\n') Here this is very useful! :D This script was created to suit my needs, so, have some paths in the code... It's not very "user friendly" yet... but if have intereting I will implement others features (like a config file). Download here: http://allan.cassaro.googlepages.com/blockthis.py Regards.

1 1

[Dovecot] Antispam plugin + scriptsieve
by Allan Cassaro 03 Dec '08

03 Dec '08

Hi, I wrote a little python program that works with antispam plugin, to create or remove sieve rules based on "From:" of any e-mail that is moved to some folder configured in dovecot.conf. He works fine with "Felamimail" the email program of "eGroupware". After setup, is very simple: If an user move a message to "blocked" folder, is appended a rule in the script sieve of this user. If the message is deleted or moved out that folder, the rule is removed too. The setup is very simple: (after setup antispam plugin) Change this in dovecot.conf: protocol imap { mail_plugins = antispam } plugin { antispam_spam = Blocked antispam_mail_sendmail = /usr/libexec/dovecot/blockthis.py antispam_mail_sendmail_args = -u;%u antispam_mail_spam = -a antispam_mail_notspam = -d } Hooo... this script create a "include global script" statament in script sieve... If you don't want this feature, just comment this 2 lines: sievelist.append('require ["fileinto", "include"];\n') sievelist.append('include :global "global.sieve";\n') Here this is very useful! :D Regards.

1 0

[Dovecot] my_vsnprintf crash on HP-UX
by Marc Beyer 03 Dec '08

03 Dec '08

Hi, sorry for the double post, I stupidly composed this as a reply to an earlier mail, which causes it to appear in an older thread. Posting again so it doesn't get lost in the archives: dovecot 1.1.7 reliably crashes every time I try to open a mailbox using IMAP. Error in the logs: dovecot: Dec 02 23:14:15 Error: setmntent(/etc/mtab) failed: No such file or directory dovecot: Dec 02 23:14:16 Panic: IMAP(arandomuser(a)example.com): my_vsnprintf(): Output string too big dovecot: Dec 02 23:14:16 Error: child 4815 (imap) killed with signal 6 dovecot: Dec 02 23:14:19 Panic: IMAP(arandomuser(a)example.com): my_vsnprintf(): Output string too big dovecot: Dec 02 23:14:19 Error: child 4816 (imap) killed with signal 6 ... (it goes on until the daemon is killed) # dovecot -n # 1.1.7: /opt/dovecot-1.1.7/etc/dovecot.conf Error: setmntent(/etc/mtab) failed: No such file or directory # OS: HP-UX B.11.31 ia64 base_dir: /var/run/dovecot log_path: /var/adm/syslog/dovecot/err.log info_log_path: /var/adm/syslog/dovecot/info.log protocols: imap imaps pop pops ssl_cert_file: /opt/dovecot/etc/dovecot.crt ssl_key_file: /opt/dovecot/etc/dovecot.key login_dir: /var/run/dovecot/login login_executable: /opt/dovecot/libexec/dovecot/imap-login verbose_proctitle: yes first_valid_uid: 113 last_valid_uid: 113 first_valid_gid: 109 last_valid_gid: 109 mail_uid: exim mail_gid: exim mail_location: maildir:/maildir/%d/%n mail_debug: yes mail_drop_priv_before_exec: yes mail_executable: /opt/dovecot/libexec/dovecot/imap mail_plugin_dir: /opt/dovecot/lib/dovecot/imap/ namespace: type: private separator: . prefix: INBOX. inbox: yes list: yes subscriptions: yes auth default: mechanisms: plain login cram-md5 executable: /opt/dovecot/libexec/dovecot/dovecot-auth user: exim verbose: yes debug: yes debug_passwords: yes passdb: driver: sql args: /opt/dovecot/etc/dovecot-mysql.conf userdb: driver: static args: uid=113 gid=109 home=/maildir/%d/%n gdb backtrace (this is the HP-UX gdb, not the GNU debugger, dovecot was compiled with the HP-UX cc): (gdb) bt #0 0x60000000c03ef990:0 in kill+0x30 () from /usr/lib/hpux32/libc.so.1 #1 0x60000000c02a0e60:0 in raise+0x120 () from /usr/lib/hpux32/libc.so.1 #2 0x60000000c03b0f70:0 in abort+0x170 () from /usr/lib/hpux32/libc.so.1 #3 0x42ab6a0:0 in default_fatal_finish (type=LOG_TYPE_PANIC, status=0) at failures.c:150 #4 0x42acd40:0 in i_internal_fatal_handler (type=LOG_TYPE_PANIC, status=0, fmt=0x409f750 "my_vsnprintf(): Output string too big", args=0x7ffff418) at failures.c:430 #5 0x42abb50:0 in i_panic ( format=0x409f750 "my_vsnprintf(): Output string too big") at failures.c:197 #6 0x4306fb0:0 in my_vsnprintf (str=0x7ffff4a0 "4935b742", size=9, format=0x4094998 "%08x", ap=0x7ffff478) at compat.c:276 #7 0x42f9a20:0 in i_snprintf (dest=0x7ffff4a0 "4935b742", max_chars=9, format=0x4094998 "%08x") at strfuncs.c:23 #8 0x41e6cd0:0 in mailbox_uidvalidity_write ( path=0x4001d400 "/maildir/example.com/arandomuser/dovecot-uidvalidity", uid_validity=1228257090) at mailbox-uidvalidity.c:42 #9 0x41e7ac0:0 in mailbox_uidvalidity_next_rescan ( path=0x4001d400 "/maildir/example.com/arandomuser/dovecot-uidvalidity") at mailbox-uidvalidity.c:154 #10 0x41e7de0:0 in mailbox_uidvalidity_next ( path=0x4001d400 "/maildir/example.com/arandomuser/dovecot-uidvalidity") at mailbox-uidvalidity.c:181 ---Type <return> to continue, or q <return> to quit--- #11 0x4110540:0 in maildir_get_uidvalidity_next (storage=0x40046698) at maildir-storage.c:1054 #12 0x4121c60:0 in maildir_uidlist_sync_update (ctx=0x40044e60) at maildir-uidlist.c:1219 #13 0x4124a70:0 in maildir_uidlist_sync_finish (ctx=0x40044e60) at maildir-uidlist.c:1609 #14 0x4114120:0 in maildir_sync_context (ctx=0x4001c220, forced=false, find_uid=0x0, lost_files_r=0x7ffff590) at maildir-sync.c:781 #15 0x41147b0:0 in maildir_storage_sync_init (box=0x4005ca28, flags=MAILBOX_SYNC_FLAG_FIX_INCONSISTENT|MAILBOX_SYNC_FLAG_FULL_READ) at maildir-sync.c:859 #16 0x41de2e0:0 in mailbox_sync_init (box=0x4005ca28, flags=MAILBOX_SYNC_FLAG_FIX_INCONSISTENT|MAILBOX_SYNC_FLAG_FULL_READ) at mail-storage.c:516 #17 0x41de4a0:0 in mailbox_sync (box=0x4005ca28, flags=MAILBOX_SYNC_FLAG_FIX_INCONSISTENT|MAILBOX_SYNC_FLAG_FULL_READ, status_items=STATUS_KEYWORDS|STATUS_FIRST_UNSEEN_SEQ|STATUS_UIDVALIDITY|STATUS_UIDNEXT|STATUS_RECENT|STATUS_MESSAGES, status_r=0x7ffff5c0) at mail-storage.c:545 #18 0x40bc200:0 in cmd_select_full (cmd=0x40054298, readonly=false) at cmd-select.c:39 #19 0x40bc640:0 in cmd_select (cmd=0x40054298) at cmd-select.c:88 #20 0x40c9c00:0 in client_command_input (cmd=0x40054298) at client.c:580 ---Type <return> to continue, or q <return> to quit--- #21 0x40ca340:0 in client_command_input (cmd=0x40054298) at client.c:629 #22 0x40ca6a0:0 in client_handle_next_command (client=0x40046da0, remove_io_r=0x7ffff610) at client.c:670 #23 0x40c9470:0 in client_handle_input (client=0x40046da0) at client.c:680 #24 0x40c6ec0:0 in client_input (client=0x40046da0) at client.c:725 #25 0x42cdb60:0 in io_loop_handler_run (ioloop=0x4002e9f0) at ioloop-poll.c:204 #26 0x42cb780:0 in io_loop_run (ioloop=0x4002e9f0) at ioloop.c:320 #27 0x40efa90:0 in main (argc=3, argv=0x7ffffa44, envp=0x7ffffa54) at main.c:293 (gdb) Doing a system call trace via tusc -p -v -o dovetrace -k -f dovecot I get the following for a crashed process (different pid since I didn't want to do the tusc on the same run). Lines start with the [5301]: [5301] open("/maildir/example.com/arandomuser", O_RDONLY|0x200000, 0152000) ................................................................................ = 8 [5301] fstat(8, 0x7ffff440) ................................................................................................................................ = 0 [5301] fcntl(8, F_SETFD, 0) ................................................................................................................................ = 0 [5301] getdents(8, 0x4007b3d0, 8192) ....................................................................................................................... = 312 [5301] getdents(8, 0x4007b3d0, 8192) ....................................................................................................................... = 0 [5301] close(8) ............................................................................................................................................ = 0 [5301] rename("/maildir/example.com/arandomuser/dovecot-uidvalidity.4935b740", "/maildir/example.com/arandomuser/dovecot-uidvalidity.4935b741") ............ = 0 [5301] open("/maildir/example.com/arandomuser/dovecot-uidvalidity", O_RDWR|O_CREAT|0x800, 0666) ............................................................ = 8 [5301] brk(0x400b1000) ..................................................................................................................................... = 0 [5301] brk(0x400c1000) ..................................................................................................................................... = 0 [5301] brk(0x400e1000) ..................................................................................................................................... = 0 [5301] brk(0x40121000) ..................................................................................................................................... = 0 [5301] brk(0x401a1000) ..................................................................................................................................... = 0 [5301] write(2, "01P m y _ v s n p r i n t f ( ) ".., 40) .................................................................................................. = 40 [5301] sigprocmask(SIG_UNBLOCK, NULL, 0x7ffff3a0) .......................................................................................................... = 0 [5301] sigaction(SIGABRT, NULL, 0x7ffff3c0) ................................................................................................................ = 0 [5301] close(1) ............................................................................................................................................ = 0 [5301] sigprocmask(SIG_BLOCK, 0x7ffff3a0, NULL) ............................................................................................................ = 0 [5301] sigaction(SIGABRT, 0x7ffff3c0, NULL) ................................................................................................................ = 0 [5301] sigprocmask(SIG_UNBLOCK, 0x7ffff3a0, NULL) .......................................................................................................... = 0 [5301] getpid() ............................................................................................................................................ = 5301 (5295) [5301] Received signal 6, SIGABRT, in kill(), [SIG_DFL], no siginfo [5301] kill(6, SIGABRT) .................................................................................................................................... [entry] [5301] exit(6) [implicit (kill failure)] ................................................................................................................... WIFSIGNALED(SIGABRT)|WCOREDUMP [5295] waitpid(-1, WIFSIGNALED(SIGABRT)|WCOREDUMP, WNOHANG) ................................................................................................ = 5301 [5302] kill(5301, SIG#0) ................................................................................................................................... ERR#3 ESRCH Anything you can think of that would help? Cheers, Marc

2 2

[Dovecot] Loginname - mapping
by Roald Amundsen 03 Dec '08

03 Dec '08

Hi! I have a server with a few thousand mailboxes (for a few hundred domains) on it. The usernames are following several naming conventions: username_domain domain_username username_domain.tld username-domain domain.username The reason for this chaos is that the accounts were set up on different mailservers, some imail, some linux, some with virtualmin and some manually and through aquisitons etc it has all ended up in one server. Now we are setting up atmail to replace imp. The loginprocess of atmail is a bit different in that you just type in your mail address and atmail tries a few combinations of loginnames to login. However, some of the combinations over atmail cant login to. Some of them works fine when using this line in dovecot.conf auth_username_translation = @_ Is there any facility to let dovecot do username mapping? If I eg have a file: usermapping that looks like this: user(a)domain1.com domain1_user user(a)domain2.com user_domain2 user(a)domain3.com domain3.user And yes, I know that the best way is to start again and use virtual domains and get all into one naming standard, but unfortunately, that is not going to happen. The other alternative is of course to hack into the source code of atmail, but I am not that confident in PHP. Any ideas? -- Regards Roald Amundsen

2 4

[Dovecot] Problem with sieve: Keep: Generic Error
by Thomas Siebert 03 Dec '08

03 Dec '08

Hi, i came across a strange error message in Ubuntu 8.10s package (Dovecot 1.1.4) regarding sieve: sieve runtime error: Keep: Generic Error sieve_execute_bytecode(/etc/dovecot/sieve/default.sievec) failed Note that the Sieve Scripts are basically executed fine and working fine. After a lot of testing I suppose the following: "keep" doesn't detect the private namespace I have to use (courier-compatibility...), thus sieve fails to do "keep", the message is handed back to dovecot-deliver which does a "keep"-similar action itself. If I have a script with "keep;" as the only command, I get this error message. If my script is totally blank (i.e. implicit keep only), I get the same error. But if there's no implicit or explicit "keep", e.g. "fileinto INBOX;" as only command, there's no error. Also IMAP-Folders, e.g. "fileinto INBOX.Test", work. Unfortunately, "fileinto INBOX" as default is no option for me, as I use a delimiter and want to let deliver put the mails into the according IMAP-Folders. Is this a known bug? Any Ideas? Thanks, Thomas Here's my dovecot -n output: log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap imaps pop3 pop3s ssl_cert_file: /etc/ssl/certs/mail_cip.pem ssl_key_file: /etc/ssl/private/mail_cip.key disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login first_valid_uid: 501 last_valid_uid: 501 first_valid_gid: 501 last_valid_gid: 501 mail_privileged_group: mail mail_uid: 501 mail_gid: 501 mail_location: maildir:~/Maildir mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugins(default): acl quota imap_quota mail_plugins(imap): acl quota imap_quota mail_plugins(pop3): quota mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 imap_client_workarounds(default): delay-newmail netscape-eoh imap_client_workarounds(imap): delay-newmail netscape-eoh imap_client_workarounds(pop3): pop3_uidl_format(default): %08Xu%08Xv pop3_uidl_format(imap): %08Xu%08Xv pop3_uidl_format(pop3): %f pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh namespace: type: private prefix: INBOX. inbox: yes list: yes subscriptions: yes auth default: mechanisms: plain login passdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf userdb: driver: prefetch userdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 384 user: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vmail plugin: quota: maildir:User quota quota_rule: *:storage=100M quota_rule2: *:messages=5000 quota_warning: storage=95%% /etc/dovecot/quota_warn_size.sh 95 quota_warning2: storage=90%% /etc/dovecot/quota_warn_size.sh 90 quota_warning3: storage=80%% /etc/dovecot/quota_warn_size.sh 80 quota_warning4: messages=95%% /etc/dovecot/quota_warn_count.sh 95 quota_warning5: messages=90%% /etc/dovecot/quota_warn_count.sh 90 quota_warning6: messages=80%% /etc/dovecot/quota_warn_count.sh 80 acl: vfile:/etc/dovecot/acls:cache_secs=300

1 0

[Dovecot] Dovecot auth-worker permission denied.
by Romer Ventura 02 Dec '08

02 Dec '08

Hello, I am trying to get dovecot to use virtual users and authenticate using PAM+kerberos against Active Directory and I am running into some problems. I followed the tutorials from the wiki page from: http://www.linuxmail.info/active-directory-dovecot-pam-authentication/ And here is what I get from the /var/log/mail log: Nov 26 15:12:27 housigma20 dovecot: auth(default): client in: AUTH 1 PLAIN service=pop3 secured lip=127.0.0.1 rip=127.0.0.1 lport=110 rport=36327 resp=AGxpbnV4dABob3VzdG9u Nov 26 15:12:27 housigma20 dovecot: auth-worker(default): pam(linuxt,127.0.0.1): lookup service=dovecot Nov 26 15:12:27 housigma20 dovecot: auth-worker(default): pam(linuxt,127.0.0.1): pam_authenticate() failed: Permission denied Nov 26 15:12:29 housigma20 dovecot: auth(default): client out: FAIL 1 user=linuxt Nov 26 15:12:31 housigma20 dovecot: pop3-login: Aborted login (auth failed, 1 attempts): user=<linuxt>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured Any ideas..? Other than this: http://www.dovecot.org/list/dovecot/2008-July/032455.html Thanks...! /etc/pam.d/dovecot: auth sufficient pam_krb5.so no_user_check validate account sufficient pam_permit.so Here is my dovecot n and version: # 1.1.6: /etc/dovecot/dovecot.conf # OS: Linux 2.6.16.60-0.21-xenpae i686 SUSE Linux Enterprise Server 10 (i586) protocols: pop3 pop3s imap imaps login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login mail_privileged_group: mail mail_location: maildir:~/Maildir/ mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 imap_client_workarounds(default): delay-newmail outlook-idle netscape-eoh imap_client_workarounds(imap): delay-newmail outlook-idle netscape-eoh imap_client_workarounds(pop3): pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh auth default: mechanisms: plain login debug: yes debug_passwords: yes passdb: driver: pam userdb: driver: static args: uid=1004 gid=1002 home=/home/vmail/%d/%Lu socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix

2 2

[Dovecot] Compilation of 1.1.6 fails on HP-UX 11.31
by Marc Beyer 02 Dec '08

02 Dec '08

Hi, $ uname -srv HP-UX B.11.31 U $ cc --version cc: HP C/aC++ B3910B A.06.20 [May 13 2008] Compilation fails, output of configure and make are given below. The cause of this is almost certainly that this version of HP-UX does define the QCMD macro in sys/quota.h (checked in the ifdef line 26 dovecot-1.1.6/src/plugins/quota/quota-fs.h) as well as the dqblk struct, but the latter with different fields than the Linux version. Older versions of HP-UX seem not to have contained this macro(? can't check this at the moment), which is probably why it was used to distinguish between HP-UX and Linux in quota-fs.h. Deleting lines 26-28 and 30 from dovecot-1.1.6/src/plugins/quota/quota-fs.h fixes the problem for HP-UX, but of course a real fix would need to add a more current method of distinguishing between Linux and HP-UX. If there's any more helfpul information you'd like let me know, cheers, Marc configure: ... Install prefix ...................... : /opt/dovecot-1.1.16 File offsets ........................ : 64bit I/O loop method ..................... : poll File change notification method ..... : none Building with SSL support ........... : yes (OpenSSL) Building with IPv6 support .......... : yes Building with pop3 server ........... : yes Building with mail delivery agent .. : yes Building with GSSAPI support ........ : no Building with user database modules . : static prefetch passwd passwd-file Building with password lookup modules : passwd passwd-file pam checkpassword Building with SQL drivers ............: make: ... source='quota-fs.c' object='quota-fs.lo' libtool=yes \ DEPDIR=.deps depmode=hp2 /bin/sh ../../../depcomp \ /bin/sh ../../../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I../../.. -I../../../src/lib -I../../../src/lib-dict -I../../../src/lib-index -I../../../src/lib-mail -I../../../src/lib-storage -I../../../src/lib-storage/index -I../../../src/lib-storage/index/maildir -I/opt/openssl/include -g -D_XOPEN_SOURCE -D_XOPEN_SOURCE_EXTENDED -c -o quota-fs.lo quota-fs.c cc -DHAVE_CONFIG_H -I. -I../../.. -I../../../src/lib -I../../../src/lib-dict -I../../../src/lib-index -I../../../src/lib-mail -I../../../src/lib-storage -I../../../src/lib-storage/index -I../../../src/lib-storage/index/maildir -I/opt/openssl/include -g -D_XOPEN_SOURCE -D_XOPEN_SOURCE_EXTENDED -c +Maked quota-fs.c -DPIC -o .libs/quota-fs.o "quota-fs.c", line 469: error #2136: struct "dqblk" has no field "dqb_curinodes" *value_r = dqblk.dqb_curinodes; ^ "quota-fs.c", line 470: error #2136: struct "dqblk" has no field "dqb_isoftlimit" *limit_r = dqblk.dqb_isoftlimit; ^ 2 errors detected in the compilation of "quota-fs.c". *** Error exit code 1

2 2

[Dovecot] Using namespaces to duplicate mailboxes (Doable?)
by Julio C. Ortega 02 Dec '08

02 Dec '08

Greetings. As part of a new installation of dovecot, we are exploring backup options, and wondered if it's at all possible to define a couple of namespaces where messages get duplicated to be saved in another disk for fast recovery. (we do not intent to load balance between the two, all we would like is to see if it's possible to have duplicate mailboxes so to keep a fast working backup _besides_ normal methods: tape, external disk, etc.) The whole idea behind this would be that in case of a major failure of the array holding the mailboxes, a fast working backup can be put in place. Other thing we would like to know (and i reckon it's a long shot) if it's possible to "hide" this mailbox copy from the IMAP clients, so as to prevent any user from subscribing _again_ to the same folders. Naturally this last thing is to be considered only if the former (mailbox copy trough namespaces or other dovecot _internal_ method) it's at all possible. Any feedback or better ideas are totally welcome. -- --------------------------------- Julio C. Ortega Grupo de Infraestructura ONUVA | Integración de Sistemas http://www.onuva.com

4 6

[Dovecot] data retention and e-discovery rules
by Trever L. Adams 02 Dec '08

02 Dec '08

Hello All, I am in the United States where we have e-discovery rules. Some organizations have to retain data for a certain amount of time, others are required to have a data retention policy. This means that while it should probably be possible for a user to "delete" an email so they do not see it. The server needs to store it, possibly in a tree that mirrors the folder setup of the user (so if it is in "Sales" folder, it should move to namespace "hidden", or similar, in folder "Sales"). Is there anything like this in dovecot? Is it possible to use cron jobs to see when the message was deleted (Maildir) and erase it based on policy? (Python scripts are fine if the users password isn't needed.) Thank you, Trever Adams

3 4

[Dovecot] symlink() failure in 1.2 managesieve
by Bruce A. Mallett 02 Dec '08

02 Dec '08

I've been simultaneously learning about dovecot and experimenting with the 1.2.alpha4. To start I built an rpm under CentOS 5.2 from: dovecot-1.2.alpha4.tar.gz dovecot-1.2-managesieve-0.11.2.tar.gz dovecot-1.2.alpha4-managesieve-0.11.2.diff.gz dovecot-1.2.alpha4.tar.gz dovecot-1.2-sieve-0.1.2.tar.gz and then setup with mysql to use virtual users. Mail-wise, it all works. :) Where I'm having trouble is with the managesieve part. I find that when I activate a sieve script I get a symlink() failure message in /var/log/maillog similar to this: Dec 2 05:12:47 hostname dovecot: MANAGESIEVE(account(a)hostname.com): sieve-storage: Creating symlink() hostname.com/account//.dovecot.sieve to /usr/local/virtual/hostname.com/account/sieve/Test.sieve failed: No such file or directory I began to chase this first by inserting i_info() calls into various points of the managesieve build and later by attaching to the process with gdb. I can see that in sieve_storage_script_activate() the storage->active_path member is incomplete (i.e., is not a full, absolute path name) and the cwd is "/tmp", thus the symlink() call fails. Based on what I've been reading in the documentation, shouldn't the system have resolved the "home" area for the mail to be the same as what is determined for the virtual user mail area? Using the README in the alpha4 package I've found that I can get it to work by adding the following after the "protocol manageseive {}" section: plugin { sieve=/usr/local/virtual/%d/%n/.dovecot.sieve sieve_storage=/usr/local/virtual/%d/%n/sieve } While that helps, I'm a little confused as to why I need to do this. I believe that the documentation states that the sieve defaults to .dovecot.sieve under the MAIL_LOCATION directory. So it is not clear to me if I am doing something wrong, if there is an oversight in the software and/or documentation (or perhaps my reading of it), or is it really necessary to specify the same information multiple times? - Bruce Here is some output that may be of use: -bash-3.2# dovecot -n # 1.2.alpha4: /etc/dovecot.conf # OS: Linux 2.6.18-8.1.8.el5xen x86_64 CentOS release 5.2 (Final) ext3 info_log_path: /var/log/dovecot.log protocols: imap imaps pop3 pop3s managesieve login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login login_executable(managesieve): /usr/libexec/dovecot/managesieve-login max_mail_processes: 100 first_valid_uid: 150 last_valid_uid: 150 mail_location: maildir:/usr/local/virtual/%d/%n mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_executable(managesieve): /usr/libexec/dovecot/managesieve mail_plugin_dir(default): /usr/lib64/dovecot/imap mail_plugin_dir(imap): /usr/lib64/dovecot/imap mail_plugin_dir(pop3): /usr/lib64/dovecot/pop3 mail_plugin_dir(managesieve): /usr/lib64/dovecot/managesieve auth default: mechanisms: plain digest-md5 debug: yes debug_passwords: yes passdb: driver: sql args: /etc/dovecot/dovecot-mysql.conf userdb: driver: sql args: /etc/dovecot/dovecot-mysql.conf plugin: sieve: /usr/local/virtual/%d/%n/.dovecot.sieve sieve_storage: /usr/local/virtual/%d/%n/sieve ----- -bash-3.2# grep -v '^ *$#.*$\?$' /etc/dovecot/dovecot-mysql.conf driver = mysql connect = host=/var/lib/mysql/mysql.sock dbname=postfix user=postfix password=postfix default_pass_scheme = MD5-CRYPT user_query = \ SELECT maildir as home, 150 AS uid, 12 AS gid FROM mailbox WHERE username = '%u' password_query = select password from mailbox where username='%u'

3 2

[Dovecot] Panic 1.1.x
by Andre Hübner 02 Dec '08

02 Dec '08

Hi, its me again. I still cant use any 1.1 edition because of recurrent panics... At the moment i try 1.1.7, i have again panics and problems with Next message unexpectedly lost dovecot -n # 1.1.7: /etc/dovecot.conf # OS: Linux 2.6.24.4 i686 SUSE LINUX 10.1 (i586) protocols: imap imaps pop3 pop3s ssl_ca_file: /path/path/*.servername.com.bundle.crt ssl_cert_file: /path/path/*.servername.com.crt ssl_key_file: /path/path/*.servername.com.key disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login login_greeting: servername.com mailserver ready. login_process_per_connection: no login_processes_count: 1 max_mail_processes: 100 verbose_proctitle: yes mail_location: mbox:~/mail:INBOX=/var/spool/mail/%u mail_cache_min_mail_count: 30 mail_debug: yes lock_method: flock mbox_read_locks: dotlock mbox_very_dirty_syncs: yes mail_drop_priv_before_exec: yes mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugins(default): mail_log mail_plugins(imap): mail_log mail_plugins(pop3): mail_plugin_dir(default): /usr/lib/dovecot/imap mail_plugin_dir(imap): /usr/lib/dovecot/imap mail_plugin_dir(pop3): /usr/lib/dovecot/pop3 imap_client_workarounds(default): outlook-idle netscape-eoh tb-extra-mailbox-sep delay-newmail imap_client_workarounds(imap): outlook-idle netscape-eoh tb-extra-mailbox-sep delay-newmail imap_client_workarounds(pop3): pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): oe-ns-eoh outlook-no-nuls auth default: verbose: yes passdb: driver: shadow userdb: driver: passwd i got some coredumps. first is pop3-panic 2nd imap-panic: gdb /usr/libexec/dovecot/pop3 /home/popuser/username/core GNU gdb 6.4 Copyright 2005 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i586-suse-linux"...Using host libthread_db library "/lib/libthread_db.so.1". Core was generated by `pop3 [username 217.229.109.202]'. Program terminated with signal 6, Aborted. warning: Can't read pathname for load map: Eingabe-/Ausgabefehler. Reading symbols from /lib/libdl.so.2...done. Loaded symbols for /lib/libdl.so.2 Reading symbols from /lib/libc.so.6...done. Loaded symbols for /lib/libc.so.6 Reading symbols from /lib/ld-linux.so.2...done. Loaded symbols for /lib/ld-linux.so.2 Reading symbols from /lib/libgcc_s.so.1...done. Loaded symbols for /lib/libgcc_s.so.1 #0 0xffffe410 in __kernel_vsyscall () (gdb) bt full #0 0xffffe410 in __kernel_vsyscall () No symbol table info available. #1 0xb7edb7d0 in raise () from /lib/libc.so.6 No symbol table info available. #2 0xb7edcea3 in abort () from /lib/libc.so.6 No symbol table info available. #3 0x080b71cd in default_fatal_finish (type=<value optimized out>, status=0) at failures.c:150 backtrace = 0x80e3520 "pop3 [0x80b71c0] -> pop3 [0x80b721a] -> pop3 [0x80b6b1c] -> pop3(i_stream_read+0xda) [0x80bb69a] -> pop3 [0x80bd57b] -> pop3(i_stream_read+0x2d) [0x80bb5ed] -> pop3 [0x80ad32e] -> pop3(i_stream_read+0"... #4 0x080b721a in i_internal_fatal_handler (type=LOG_TYPE_PANIC, status=0, fmt=0x80cac30 "file %s: line %d (%s): assertion failed: (%s)", args=0xbfab4104 "\"\204\r\bQ") at failures.c:430 No locals. #5 0x080b6b1c in i_panic (format=0x80cac30 "file %s: line %d (%s): assertion failed: (%s)") at failures.c:197 args = 0xbfab4104 "\"\204\r\bQ" #6 0x080bb69a in i_stream_read (stream=0x80f4590) at istream.c:81 _stream = (struct istream_private *) 0x80f4568 ret = 6 __PRETTY_FUNCTION__ = "i_stream_read" #7 0x080bd57b in i_stream_limit_read (stream=0x80f1c50) at istream-limit.c:59 left = <value optimized out> ret = 0 pos = 0 __PRETTY_FUNCTION__ = "i_stream_limit_read" #8 0x080bb5ed in i_stream_read (stream=0x80f1c78) at istream.c:78 _stream = (struct istream_private *) 0x80f1c50 ret = <value optimized out> __PRETTY_FUNCTION__ = "i_stream_read" #9 0x080ad32e in i_stream_header_filter_read (stream=0x80f1d30) at istream-header-filter.c:313 mstream = <value optimized out> ret = 135208240 pos = 0 __PRETTY_FUNCTION__ = "i_stream_header_filter_read" #10 0x080bb5ed in i_stream_read (stream=0x80f1d58) at istream.c:78 _stream = (struct istream_private *) 0x80f1d30 ret = <value optimized out> __PRETTY_FUNCTION__ = "i_stream_read" #11 0x080bb6fd in i_stream_read_data (stream=0x80f1d58, data_r=0xbfab4268, size_r=0xbfab4264, threshold=0) at istream.c:322 ret = 135205628 read_more = false __PRETTY_FUNCTION__ = "i_stream_read_data" #12 0x080b20fc in message_get_body_size (input=0x80f1d58, body=0x80f1380, has_nuls=0x0) at message-size.c:76 msg = (const unsigned char *) 0x0 i = <value optimized out> size = <value optimized out> missing_cr_count = <value optimized out> __PRETTY_FUNCTION__ = "message_get_body_size" #13 0x0807cc81 in index_mail_init_stream (mail=0x80f1280, hdr_size=0xbfab4340, body_size=0xbfab432c, stream_r=0xbfab4354) at index-mail.c:818 data = (struct index_mail_data *) 0x80f12fc #14 0x08064c82 in mbox_mail_get_stream (_mail=0x80f1280, hdr_size=0xbfab4340, body_size=0xbfab432c, stream_r=0xbfab4354) at mbox-mail.c:312 mail = <value optimized out> #15 0x0807b9c6 in index_mail_get_virtual_size (_mail=0x80f1280, size_r=0xbfab43f0) at index-mail.c:365 data = (struct index_mail_data *) 0x80f12fc hdr_size = {physical_size = 0, virtual_size = 0, lines = 0} body_size = {physical_size = 580703221134869339, virtual_size = 13811206796352623048, lines = 134770482} input = (struct istream *) 0xbfab43f0 old_offset = 0 __PRETTY_FUNCTION__ = "index_mail_get_virtual_size" #16 0x08058cf2 in client_create (fd_in=0, fd_out=1, namespaces=0x80ec478) at client.c:85 storage = <value optimized out> ---Type <return> to continue, or q <return> to quit--- inbox = 0x80cab79 "INBOX" client = (struct client *) 0x80ecf68 flags = <value optimized out> errmsg = <value optimized out> error = MAIL_ERROR_NONE __PRETTY_FUNCTION__ = "client_create" #17 0x0805aaf3 in main (argc=Cannot access memory at address 0x69fc ) at main.c:235 No locals. imap-core: gdb /usr/libexec/dovecot/imap /home/popuser/username1/core GNU gdb 6.4 Copyright 2005 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i586-suse-linux"...Using host libthread_db library "/lib/libthread_db.so.1". Core was generated by `imap [username1 80.243.53.138]'. Program terminated with signal 6, Aborted. warning: Can't read pathname for load map: Eingabe-/Ausgabefehler. Reading symbols from /lib/libdl.so.2...done. Loaded symbols for /lib/libdl.so.2 Reading symbols from /lib/libc.so.6...done. Loaded symbols for /lib/libc.so.6 Reading symbols from /lib/ld-linux.so.2...done. Loaded symbols for /lib/ld-linux.so.2 Reading symbols from /usr/lib/dovecot/imap/lib20_mail_log_plugin.so...done. Loaded symbols for /usr/lib/dovecot/imap/lib20_mail_log_plugin.so Reading symbols from /lib/libnss_files.so.2...done. Loaded symbols for /lib/libnss_files.so.2 Reading symbols from /lib/libgcc_s.so.1...done. Loaded symbols for /lib/libgcc_s.so.1 #0 0xffffe410 in __kernel_vsyscall () (gdb) bt full #0 0xffffe410 in __kernel_vsyscall () No symbol table info available. #1 0xb7e807d0 in raise () from /lib/libc.so.6 No symbol table info available. #2 0xb7e81ea3 in abort () from /lib/libc.so.6 No symbol table info available. #3 0x080c451d in default_fatal_finish (type=<value optimized out>, status=0) at failures.c:150 backtrace = 0x80f28b0 "imap [0x80c4510] -> imap [0x80c456a] -> imap [0x80c3e6c] -> imap [0x80ca8a4] -> imap(i_stream_read+0x2d) [0x80c893d] -> imap(i_stream_read_data+0x1d) [0x80c8a4d] -> imap(message_parse_header_next+0x7c"... #4 0x080c456a in i_internal_fatal_handler (type=LOG_TYPE_PANIC, status=0, fmt=0x80d7dcc "file %s: line %d (%s): assertion failed: (%s)", args=0xbfa4e634 "Cw\016\bT") at failures.c:430 No locals. #5 0x080c3e6c in i_panic (format=0x80d7dcc "file %s: line %d (%s): assertion failed: (%s)") at failures.c:197 args = 0xbfa4e634 "Cw\016\bT" #6 0x080ca8a4 in i_stream_limit_read (stream=0x810c4f0) at istream-limit.c:83 left = <value optimized out> ret = -1 pos = 30 __PRETTY_FUNCTION__ = "i_stream_limit_read" #7 0x080c893d in i_stream_read (stream=0x810c518) at istream.c:78 _stream = (struct istream_private *) 0x810c4f0 ret = <value optimized out> __PRETTY_FUNCTION__ = "i_stream_read" #8 0x080c8a4d in i_stream_read_data (stream=0x810c518, data_r=0xbfa4e708, size_r=0xbfa4e704, threshold=30) at istream.c:322 ret = -1079711992 read_more = false __PRETTY_FUNCTION__ = "i_stream_read_data" #9 0x080bc75c in message_parse_header_next (ctx=0x811cc58, hdr_r=0xbfa4e760) at message-header-parser.c:89 msg = ( const unsigned char *) 0x8111564 "\t\t\t\t\t\t\tGefahrenquelle vermeiden/beseitigen/reduzieren\n\t\t\t\t\t\t\tD D \n\t\t\t\t\t\t\t \n\t\t\t\t\t\t\tSicherheitstechnische Maßnahmen\n\t\t\t\t\t\t\tB B \n\t\t\t\t\t"... i = 6 size = 30 startpos = 29 colon_pos = 0 parse_size = 29 value_pos = <value optimized out> ret = 6 continued = true continues = <value optimized out> crlf_newline = false __PRETTY_FUNCTION__ = "message_parse_header_next" #10 0x080b9de5 in read_header (mstream=0x8112318) at istream-header-filter.c:163 hdr = (struct message_header_line *) 0x0 highwater_offset = <value optimized out> pos = <value optimized out> ret = <value optimized out> matched = false hdr_ret = 1 __PRETTY_FUNCTION__ = "read_header" #11 0x080ba4e7 in i_stream_header_filter_read (stream=0x8112318) at istream-header-filter.c:293 mstream = (struct header_filter_istream *) 0x0 ret = <value optimized out> pos = <value optimized out> __PRETTY_FUNCTION__ = "i_stream_header_filter_read" #12 0x080ba634 in parse_header (mstream=0x8112318) at istream-header-filter.c:335 pos = 159 #13 0x080ba715 in i_stream_header_filter_seek (stream=0x8112318, v_offset=554, mark=false) at istream-header-filter.c:349 mstream = (struct header_filter_istream *) 0x0 ---Type <return> to continue, or q <return> to quit--- #14 0x080c88c9 in i_stream_seek (stream=0x8112340, v_offset=554) at istream.c:155 _stream = (struct istream_private *) 0x8112318 #15 0x080718e3 in mbox_mail_get_physical_size (_mail=0x810cb28, size_r=0xbfa4e908) at mbox-mail.c:255 mail = <value optimized out> data = (struct index_mail_data *) 0x810cba4 input = (struct istream *) 0x8112340 hdr_size = {physical_size = 552, virtual_size = 566, lines = 14} old_offset = 554 body_offset = 162775 body_size = <value optimized out> next_offset = 10982 #16 0xb7f83aec in mail_log_action (dest_trans=<value optimized out>, mail=0x810cb28, event=<value optimized out>, data=0x8108930 "Gel&APY-schte Elemente") at mail-log-plugin.c:305 lt = (struct mail_log_transaction_context *) 0x8115e50 msgid = 0x810d510 "<20081202003003.E428C68341EB4(a)servername.com>" size = <value optimized out> str = (string_t *) 0x80f2620 pool = <value optimized out> #17 0xb7f83d56 in mail_log_copy (t=0x810b0f8, mail=0x810cb28, flags=0, keywords=0x0, dest_mail=0x0) at mail-log-plugin.c:400 _data_stack_cur_id = 4 name = <value optimized out> #18 0x0805a202 in cmd_copy (cmd=0x80fc9d0) at cmd-copy.c:66 client = (struct client *) 0x80fb548 storage = (struct mail_storage *) 0x80fc108 destbox = (struct mailbox *) 0x8108780 t = (struct mailbox_transaction_context *) 0x810b0f8 search_arg = <value optimized out> messageset = 0x8100ad0 "10359" mailbox = 0x8100ad8 "Gel&APY-schte Elemente" src_uidset = <value optimized out> msg = <value optimized out> sync_flags = <value optimized out> imap_flags = <value optimized out> copy_count = 1 uid_validity = <value optimized out> uid1 = <value optimized out> uid2 = <value optimized out> ret = 1 __PRETTY_FUNCTION__ = "cmd_copy" #19 0x0805e529 in cmd_uid (cmd=0x80fc9d0) at cmd-uid.c:26 command = (struct command *) 0x6 cmd_name = 0x8100ac8 "COPY" #20 0x0805eecc in client_command_input (cmd=0x80fc9d0) at client.c:580 client = (struct client *) 0x80fb548 command = <value optimized out> __PRETTY_FUNCTION__ = "client_command_input" #21 0x0805ef75 in client_command_input (cmd=0x80fc9d0) at client.c:629 client = (struct client *) 0x80fb548 command = (struct command *) 0x4c54 __PRETTY_FUNCTION__ = "client_command_input" #22 0x0805f735 in client_handle_input (client=0x80fb548) at client.c:670 _data_stack_cur_id = 3 ret = <value optimized out> remove_io = <value optimized out> handled_commands = false #23 0x0805f94e in client_input (client=0x80fb548) at client.c:725 cmd = <value optimized out> output = (struct ostream *) 0x80fc90c bytes = 46 ---Type <return> to continue, or q <return> to quit--- __PRETTY_FUNCTION__ = "client_input" #24 0x080cc130 in io_loop_handler_run (ioloop=0x80fa9b0) at ioloop-epoll.c:203 ctx = <value optimized out> event = (const struct epoll_event *) 0x80faae8 list = (struct io_list *) 0x80fb5b8 io = (struct io_file *) 0x810caa0 tv = {tv_sec = 1799, tv_usec = 999911} t_id = 2 msecs = <value optimized out> ret = 1 i = 0 j = 0 call = <value optimized out> #25 0x080cb248 in io_loop_run (ioloop=0x80fa9b0) at ioloop.c:320 No locals. #26 0x0806748c in main (argc=Cannot access memory at address 0x4c54 ) at main.c:293 No locals. I did some bugreports in last time and also compiled dovecot with some changes in guidance from timo to let the bug be more understandable but so far nothing helped. i like dovecot but if these bugs not get solved i cannot upgrade my maschines to > 1.0.15 :( Thanks, Andre

1 0

[Dovecot] Quota & expire problem
by Kari Suomela (DC) 02 Dec '08

02 Dec '08

I have managed to get the master quota working, but cannot get individual user quota to do anything. Here is a line from /etc/dovecot/passwd: _kari@karico.ca:XXXXXXXXX:502:502::/var/mail/vhosts/karico.ca/kari::userdb_quota_rule=*:bytes=600M_ Also, based on this, the expire cron job says: Unknown dict module: db # 1.1.6: /etc/dovecot.conf # OS: Linux 2.6.18-92.1.18.el5.centos.plusxen i686 CentOS release 5.2 (Final) log_path: /var/log/dovecot/dovecot.log info_log_path: /var/log/dovecot/dovecot.log protocols: imap pop3 imaps pop3s listen: 209.222.57.19 ssl_listen: 209.222.57.19 verbose_ssl: yes login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login login_greeting: mail.karico.ca ready. login_greeting_capability: yes verbose_proctitle: yes mail_access_groups: virtual mail_location: maildir:~/Maildir mail_debug: yes mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(pop3): quota mail_plugin_dir(default): /usr/lib/dovecot/imap mail_plugin_dir(imap): /usr/lib/dovecot/imap mail_plugin_dir(pop3): /usr/lib/dovecot/pop3 auth external: verbose: yes debug: yes debug_passwords: yes socket: type: connect master: path: /var/run/dovecot/auth-master mode: 384 auth default: verbose: yes debug: yes debug_passwords: yes passdb: driver: passwd-file args: /etc/dovecot/passwd userdb: driver: static args: uid=virtual gid=virtual home=/var/mail/vhosts/%d/%n socket: type: listen client: path: /var/run/dovecot/auth-client mode: 432 master: path: /var/run/dovecot/auth-master mode: 384 plugin: quota: maildir:User quota quota_rule: *:storage=1G quota_rule2: Trash:storage=20%% quota_rule3: Spam:storage=30%% quota_warning: storage=95%% /usr/local/bin/quota-warning.sh 95 quota_warning2: storage=70%% /usr/local/bin/quota-warning.sh 70 expire: Trash 7 Spam 30 expire_dict: db:/var/lib/dovecot/expire.db dict: expire: db:/var/lib/dovecot/expire.db

2 9

[Dovecot] Autocreate plugin for 1.1 - trying to patch under FreeBSD
by Proskurin Kirill 02 Dec '08

02 Dec '08

Hello all. I try to add Autocreate plugin patch to my FreeBSD host. I think I make all wrong. Could you tell me how to patch it? What I do: cd /usr/ports/mail/dovecot make extract cd cd work/dovecot-1.1.6/src/ fetch http://www.dovecot.org/patches/1.1/autocreate-plugin.c sh -x /tmp/patch.sh + export DOVECOT=~/usr/ports/mail/dovecot/work/dovecot-1.1.6/src + gcc -fPIC -shared -g -Wall -I~/usr/ports/mail/dovecot/work/dovecot-1.1.6/src -I~/usr/ports/mail/dovecot/work/dovecot-1.1.6/src/src/lib -I~/usr/ports/mail/dovecot/work/dovecot-1.1.6/src/src/lib-storage -I~/usr/ports/mail/dovecot/work/dovecot-1.1.6/src/src/lib-mail -I~/usr/ports/mail/dovecot/work/dovecot-1.1.6/src/src/lib-imap -DHAVE_CONFIG_H autocreate-plugin.c -o autocreate_plugin.so autocreate-plugin.c:22:17: error: lib.h: No such file or directory autocreate-plugin.c:23:26: error: mail-storage.h: No such file or directory autocreate-plugin.c:24:28: error: mail-namespace.h: No such file or directory autocreate-plugin.c:28: error: 'PACKAGE_VERSION' undeclared here (not in a function) autocreate-plugin.c:31: warning: 'struct mail_namespace' declared inside parameter list autocreate-plugin.c:31: warning: its scope is only this definition or declaration, which is probably not what you want autocreate-plugin.c:33: warning: 'struct mail_namespace' declared inside parameter list autocreate-plugin.c: In function 'autocreate_mailboxes': autocreate-plugin.c:43: warning: implicit declaration of function 'mail_namespace_find' autocreate-plugin.c:43: warning: assignment makes pointer from integer without a cast autocreate-plugin.c:45: warning: implicit declaration of function 'mail_storage_mailbox_create' autocreate-plugin.c:45: error: dereferencing pointer to incomplete type autocreate-plugin.c:46: error: 'FALSE' undeclared (first use in this function) autocreate-plugin.c:46: error: (Each undeclared identifier is reported only once autocreate-plugin.c:46: error: for each function it appears in.) autocreate-plugin.c:49: warning: implicit declaration of function 'i_snprintf' autocreate-plugin.c: At top level: autocreate-plugin.c:54: warning: 'struct mail_namespace' declared inside parameter list autocreate-plugin.c: In function 'autosubscribe_mailboxes': autocreate-plugin.c:64: warning: assignment makes pointer from integer without a cast autocreate-plugin.c:66: warning: implicit declaration of function 'mailbox_list_set_subscribed' autocreate-plugin.c:66: error: dereferencing pointer to incomplete type autocreate-plugin.c:66: error: 'TRUE' undeclared (first use in this function) autocreate-plugin.c: At top level: autocreate-plugin.c:74: warning: 'struct mail_namespace' declared inside parameter list autocreate-plugin.c: In function 'autocreate_mail_namespaces_created': autocreate-plugin.c:77: warning: passing argument 1 of 'autocreate_next_hook_mail_namespaces_created' from incompatible pointer type autocreate-plugin.c:79: warning: passing argument 1 of 'autocreate_mailboxes' from incompatible pointer type autocreate-plugin.c:80: warning: passing argument 1 of 'autosubscribe_mailboxes' from incompatible pointer type autocreate-plugin.c: In function 'autocreate_plugin_init': autocreate-plugin.c:89: error: 'hook_mail_namespaces_created' undeclared (first use in this function) autocreate-plugin.c: In function 'autocreate_plugin_deinit': autocreate-plugin.c:95: error: 'hook_mail_namespaces_created' undeclared (first use in this function) + cp autocreate_plugin.so /usr/local/lib/dovecot/imap/autocreate_plugin.so cp: autocreate_plugin.so: No such file or directory P.S. cat /tmp/patch.sh # replace * with the correct version: export DOVECOT=~/usr/ports/mail/dovecot/work/dovecot-1.1.6/src gcc -fPIC -shared -g -Wall -I$DOVECOT -I$DOVECOT/src/lib \ -I$DOVECOT/src/lib-storage -I$DOVECOT/src/lib-mail \ -I$DOVECOT/src/lib-imap -DHAVE_CONFIG_H \ autocreate-plugin.c -o autocreate_plugin.so # $PREFIX is the installation directory, e.g. /usr/local or /usr: cp autocreate_plugin.so /usr/local/lib/dovecot/imap/autocreate_plugin.so -- Best regards, Proskurin Kirill

2 3

[Dovecot] Feature request: Force leave copy on server
by Bárður Háskor 02 Dec '08

02 Dec '08

It would be very nice, if I could force users to leave a copy on the server when using POP3. This is because users primarily use a web interface to access mail (the web interface uses IMAP), but users can also download messages using POP3. Users who forget to set the "Leave copy on server" get all their messages deleted in the web interface, and mostly they don't want (expect) this behavior. Isn't it possible to create another way to tag POP3 messages as deleted without these being deleted in IMAP? Sincerely, Bardur Haskor

2 2

[Dovecot] Panic in version 1.1.6
by Rob Mangiafico 01 Dec '08

01 Dec '08

Hello, We have seen a few of these panics in 1.1.6. It seems to happen when pine is being used and a POP3 check occurs at the same time (but not always), but I'm not positive this is always the case: --- Nov 22 11:10:32 lexiconn2 dovecot: Panic: POP3(techjm): file istream.c: line 76 (i_stream_read): assertion failed: (_stream-> skip != _stream->pos) Nov 22 11:10:32 lexiconn2 dovecot: POP3(techjm): Raw backtrace: pop3 [0x80c38f0] -> pop3 [0x80c394a] -> pop3 [0x80c324c] -> p op3(i_stream_read+0xda) [0x80c7dda] -> pop3 [0x80c9c6b] -> pop3(i_stream_read+0x2d) [0x80c7d2d] -> pop3 [0x80b9abe] -> pop3(i _stream_read+0x2d) [0x80c7d2d] -> pop3(i_stream_read_data+0x1d) [0x80c7e3d] -> pop3(message_get_body_size+0x5c) [0x80be85c] - > pop3(index_mail_init_stream+0x151) [0x8089571] -> pop3 [0x80717a2] -> pop3(index_mail_get_virtual_size+0x76) [0x80882b6] -> pop3(client_create+0x282) [0x8059c72] -> pop3(main+0x403) [0x805ba83] -> /lib/libc.so.6(__libc_start_main+0xdc) [0x492dec] - > pop3 [0x8059351] dovecot -n # 1.1.6: /usr/local/etc/dovecot.conf # OS: Linux 2.6.18-53.1.14.el5 i686 CentOS release 5.2 (Final) protocols: imap imaps pop3 pop3s ssl_cert_file: /usr/local/apache/conf/ssl.crt/lexiconn.com.cert ssl_key_file: /usr/local/apache/conf/ssl.key/lexiconn.com.key ssl_cipher_list: HIGH:MEDIUM:+TLSv1:!SSLv2:+SSLv3 disable_plaintext_auth: no login_dir: /usr/local/var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login mail_privileged_group: mail mail_location: mbox:~/:INBOX=/var/spool/mail/%u mail_full_filesystem_access: yes mmap_disable: yes fsync_disable: yes mbox_write_locks: fcntl mbox_very_dirty_syncs: yes mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_process_size: 512 mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 pop3_uidl_format(default): %08Xu%08Xv pop3_uidl_format(imap): %08Xu%08Xv pop3_uidl_format(pop3): %08Xv%08Xu pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh auth default: mechanisms: plain login username_format: %Lu verbose: yes passdb: driver: shadow userdb: driver: passwd --- We've enabled core dumps to try and get a gdb backtrace the next time this happens. Rob

1 1

[Dovecot] help on MailLocation please!
by Li Wei Nan 01 Dec '08

01 Dec '08

Hi Everyone, I'm now using dovecot with a POP3&SMTP server called JAMES. I want dovecot and james to share the email location. Both dovecot and james can store email in mbox format. However, the james will only store mbox mail repo in a fixed dir, such as: /var/mail/ And it will naming each user's mbox repo by its name, such as /var/ mail/tom or /var/mail/peter, etc. So I have to config dovecot for it to fit the situation. So I config dovecot as: mail_location = mbox:/var/mail:INBOX=/var/mail/%u The inbox get worked now, dovecot can read the mbox file created by james correctly. However, dovecot make each user's Trash, Sent in same directory: /var/mail. So it means all the user just have one Trash, Sent. I've read the Wiki carefully and tried some different config and still cannot get it work. Can anyone gives me some advice on it? Thanks a lot! What I hope to achieve is: - Let dovecot read everyone's inbox at: /var/mail/%u (it's a mbox file, not dir) - Let dovecot store everyone's Trash, Sent in /var/mail/%u/mail Thanks in advance. - Li Wei Nan

2 2

[Dovecot] lda logging directive does'nt work...
by Jean-Claude Barbet 01 Dec '08

01 Dec '08

Hi all, I'm using Postfix + Dovecot with system users (/etc/passwd and NIS) + deliver + cmusieve; Here are some relevant lines in conf files : /etc/postfix/main.cf ... mailbox_command = /usr/lib/dovecot/deliver ... /etc/dovecot/dovecot.conf ... protocol lda { postmaster_address = postmaster(a)lri.fr mail_plugins = cmusieve deliver_log_format = msig=%m : Subject=%s : From=%f :%$ } ... I just want deliver to log more than default format...like procmail... but nothing happens...the line 'deliver_log_format' seems to be ignored. Any idea ?

2 3

[Dovecot] Dovecot POP3 problem: Authentication suddenly fails until dovecot gets restarted
by Carsten Buchenau 01 Dec '08

01 Dec '08

Hi, I am running dovecot with postfix and OTRS2 on a fresh Ubuntu 8.10 Server system. OTRS2 is configured to poll new email to otrs-incoming@localhost via POP3 every 5 minutes. It works, but after approximately 20 hours it suddenly stops working and only a restart of dovecot helps. The outage starts at different times during night (00:15 on Thursday, 1:15 on Friday, 3:20 on Saturday). I checked all cron-jobs, but couldn't find anything matching. Anyone any idea? Thanks, carsten Mail.log: Nov 29 07:10:13 wombat dovecot: auth-worker(default): pam(otrs-incoming,127.0.0.1): pam_start() failed: Critical error - immediate abort Nov 29 07:10:14 wombat dovecot: pop3-login: Aborted login (auth failed, 1 attempts): user=<otrs-incoming>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured Dovecot.conf: protocols = pop3 pop3s log_timestamp = "%Y-%m-%d %H:%M:%S " mail_location = mbox:~/mail:INBOX=/var/mail/%u mail_privileged_group = mail protocol imap { } protocol pop3 { pop3_uidl_format = %08Xu%08Xv } protocol managesieve { sieve=~/.dovecot.sieve sieve_storage=~/sieve } auth default { mechanisms = plain passdb pam { } userdb passwd { } user = root } dict { } plugin { } /etc/pam.d/dovecot: #%PAM-1.0 @include common-auth @include common-account @include common-session Manual test of POP3 Authentication: root@localhost:/etc/pam.d# telnet localhost 110 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. +OK Dovecot ready. user otrs-incoming +OK pass XXXXXX -ERR Temporary authentication failure.

2 3

[Dovecot] Relay-Ctrl, error message
by Wouter van der Schagt 30 Nov '08

30 Nov '08

Hi all, I'm trying to get Relay-Ctrl to work (as explained on http://wiki.dovecot.org/HowTo/PopBSMTPAndDovecot) however when i add: mail_executable: /usr/local/bin/envdir /etc/relay-ctrl /usr/local/bin/relay-ctrl-chdir /usr/local/bin/dovecot-settcpremoteip /usr/local/bin/relay-ctrl-allow /usr/local/libexec/dovecot/imap to /usr/local/etc/dovecot.conf I get the following error message when doing dovecot -n Error: Error in configuration file /usr/local/etc/dovecot.conf line 126: Expecting '=' Fatal: Invalid configuration in /usr/local/etc/dovecot.conf So I'm guessing i misplaced the line somewhere in the config file. Where should it be placed? Does it work for both pop3 and imap? Sincerely, - Wouter van der Schagt

2 1

[Dovecot] Cache details
by Warren Baker 30 Nov '08

30 Nov '08

Hi All, Is there any specific details we can extract from dovecots authentication cache (besides Authentication cache hits)? Reason i am asking is because we had a mysql user account which was returning a unknown user account. Fixing the one value in the sql result didnt have any affect and Dovecot was still returning an auth failure for the user after 24 hours had elapsed, even though auth_cache_negative_ttl was set to 120. Restarting Dovecot or a SIGHUP on dovecot-auth sorted out the problem. It would be useful if we could interrogate the cache somehow to see what cache entry is been hit. Auth cache settings are as follows: auth_cache_size = 51200 auth_cache_ttl = 2100 auth_cache_negative_ttl = 120 Any suggestions appreciated. Thanks, Warren

2 1

[Dovecot] INTERNALDATE call, timezone randomly changes
by Guy 30 Nov '08

30 Nov '08

Hi guys, I've run into an odd little problem. We use SquirrelMail as the basis for our webmail. Recently I've had a user complaining that the "Received" time on mail in the Sent folder has changed between logins. The change is always been by +1 hours or -5 hours. While checking, our developer had a time changed by +2 hours. On refresh it changed back. He poked through the code and it looks like SquirrelMail gets the received date via an IMAP command: A003 FETCH 1:10 (INTERNALDATE FLAGS BODY.PEEK[HEADER.FIELDS (To Content-Type Subject Date)]) I'm running dovecot 1.1.6, and I'm wondering how that function gets the date and time? If I can isolate the source of the timezone I can try and correct it. The server time shown by "date" is correct and /etc/localtime is /usr/share/zoneinfo/Europe/London (which is correct - I've also se the timezone in /etc/conf.d/clock is set to "Europe/London" now), so I'm wondering where else the information could be coming from? Thanks for any information you can give me to help isolate the problem. Guy -- Don't just do something...sit there!

2 1

[Dovecot] v1.2.alpha4 released
by Timo Sirainen 30 Nov '08

30 Nov '08

http://dovecot.org/releases/1.2/alpha/dovecot-1.2.alpha4.tar.gz http://dovecot.org/releases/1.2/alpha/dovecot-1.2.alpha4.tar.gz.sig Note that there are significant changes in this release from alpha3 and I haven't tested everything extensively. Be careful. The next release will hopefully be v1.2.beta1 with a feature freeze. Most importantly shared mailboxes and IMAP ACLs are finally supported. This is mainly thanks to the Kolab people (looks like I forgot your names from NEWS file, the next release will have them). I'll have to write a wiki page about ACLs, but the main thing you need to know is that if you want shared mailboxes to be LISTable by other users, you'll need to specify acl_dict. If you don't expect many shared mailboxes, a file backend is the easiest, but you could also use SQL or Berkeley DB. With a file backend you could also create per-domain files, which will improve performance if you don't need cross-domain shared mailboxes. You could do this with e.g.: acl_file = /home/virtual/%d/shared-mailboxes Also full text searching works now better with virtual mailboxes. Previously the fts would have duplicated the indexes for virtual mailboxes. Now with Solr backend it searches the original mailboxes directly. Although this is still missing some optimizations and also it doesn't check first if mails are missing from the original mailboxes, so it may not find everything. Also this still doesn't work with Squat backend.. Anyway, a bit more code and Dovecot will have fast full text searching from all mailboxes (virtual * mailbox). I implemented also draft-gulbrandsen-imap-response-codes-04, which adds some [codes] for all IMAP command failures, which should make it possible for clients to figure out more easily what caused the failure. Hopefully the draft won't change much anymore. :)

2 2

[Dovecot] Dovecot as proxy for M$ Exchange mailboxes
by Axel Schmalowsky 30 Nov '08

30 Nov '08

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi list, is there a way to use dovecot as proxy for m$ exchange mailboxes? Currently, our clients not only can login to their mailboxes with their e-mail address but also with their accountid. Both the clients e-mail address and accountid are stored in ldap. Now I need a way to let dovecot rewriting the client's accountid to the respective e-mail address. Is this possible with the proxy-feature of dovecot? Any hints would be appreciated. - -- Freundliche Grüße / Kind regards Axel Schmalowsky Platform Engineer ___________________________________ domainfactory GmbH Oskar-Messter-Str. 33 85737 Ismaning Germany Telefon: +49 (0)89 / 55266-356 Telefax: +49 (0)89 / 55266-222 E-Mail: aschmalowsky(a)df.eu Internet: www.df.eu Registergericht: Amtsgericht München HRB 150294, Geschäftsführer Tobias Marburg, Jochen Tuchbreiter -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.7 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFJL+JKsuqpduCyZM0RAoFUAJ9mPbv5eI5xP54YhwlmOs40F1RxDQCgir5l jCdaNeXKO8FnOCxaKSI7S4E= =m5WN -----END PGP SIGNATURE-----

3 2