- dovecot - dovecot.org

[Dovecot] OT: Deleting email
by Mauricio Tavares 19 Jul '08

19 Jul '08

I have a mail server running postfix and then using dovecot so others can reach it using imap. I go check mail using thunderbird and delete a few emails, emptying the trash afterwards. Then I quit it and access it using pine. The deleted emails are still there, marked as marked for deletion. I delete a few other emails within pine and quit. It asks to delete the marked emails, I tell go for it, and it does. When I go back to THunderbird all those emails are gone. Next I tell thunderbird to mark certain messages as spam and delete email I marked as spam. I quit it and go back to pine. The spam marked messages which thunderbird swore were deleted are still there. THis really does not seem to be a dovecot issue, but has someone seen that happen? If so, what is going on?

2 1

Re: [Dovecot] Problems with dovecot/sieve and vacation
by iaslanidis＠flumotion.com 19 Jul '08

19 Jul '08

Hello, Thank you for the reply. I will plan to do the upgrade some time soon, that is not questionable. Now back to this, I checked the following: # strings /usr/libexec/dovecot/deliver | grep sendmail /usr/lib/sendmail So, if I understand correctly, this is fine. What I have in maillog is the following: 614u19e82aed7fe5a435(a)mail.gmail.com> for <iaslanidis(a)flumotion.com> ORCPT=rfc822;iaslanidis(a)flumotion.com Jul 19 01:58:56 se01 spampd[9143]: clean message <ea440b1d0807181658s458ba614u19e82aed7fe5a435(a)mail.gmail.com> (0.28/3.50) from <aslanidis(a)gmail.com> for <iaslanidis(a)flumotion.com> ORCPT=rfc822;iaslanidis(a)flumotion.com in 0.04s, 1926 bytes. Jul 19 01:58:56 se01 clamsmtpd: 10C4A0: from=aslanidis(a)gmail.com, to=iaslanidis(a)flumotion.com, status=CLEAN Jul 19 01:58:56 se01 postfix/smtp[15494]: AC414250084: to=<iaslanidis(a)flumotion.com>, relay=127.0.0.1[127.0.0.1]:10025, delay=0.86, delays=0.55/0.01/0.06/0.24, dsn=2.0.0, status=sent (250 2.0.0 Ok: queued as 253AE250133) Jul 19 01:58:56 se01 deliver(iaslanidis(a)flumotion.com): execv(/usr/lib/sendmail) failed: Permission denied Jul 19 01:58:56 se01 deliver(iaslanidis(a)flumotion.com): Sendmail process terminated abnormally, exit status 89 Jul 19 01:58:56 se01 deliver(iaslanidis(a)flumotion.com): sieve runtime error: Vacation: Error sending mail Jul 19 01:58:57 se01 deliver(iaslanidis(a)flumotion.com): msgid=<ea440b1d0807181658s458ba614u19e82aed7fe5a435(a)mail.gmail.com>: saved mail to INBOX Jul 19 01:58:57 se01 deliver(iaslanidis(a)flumotion.com): msgid=<ea440b1d0807181658s458ba614u19e82aed7fe5a435(a)mail.gmail.com>: saved mail to INBOX Jul 19 01:58:57 se01 postfix/pipe[15529]: 253AE250133: to=<iaslanidis(a)flumotion.com>, relay=dovecot, delay=1.5, delays=0.24/0.01/0/1.2, dsn=2.0.0, status=sent (delivered via dovecot service) For what I see here, this could be a SELinux permission problem, am I right? Regards, Ioannis On Sat, 19 Jul 2008 02:35:11 +0300, Uldis Pakuls <neko(a)it4u.lv> wrote: > Vacation code calls 2 functions: first marks dupes (it seems working) , > then, if it success second function is called which actualy sends > vacation message. This action (success or failure) is loged in log file. > 1. wthat is in your log files? > 2. the only reason I can guess about failure in second function is > sendmail binary. default value of "sendmail_path" (hardcoded) is > /usr/lib/sendmail. You can verify this: "strings > /path/to/dovecot/deliver | grep sendmail" If default value is incorrect > try add sendmail_path variable in dovecot.conf

2 1

[Dovecot] Problems with dovecot/sieve and vacation
by Ioannis Aslanidis 19 Jul '08

19 Jul '08

Hello, First of all, initial data: # dovecot --version 1.0.rc15 # dovecot -n # /etc/dovecot.conf protocols: imaps pop3s disable_plaintext_auth: yes login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login login_max_processes_count: 256 login_max_connections: 512 verbose_proctitle: yes first_valid_uid: 200 last_valid_uid: 200 first_valid_gid: 200 last_valid_gid: 200 mail_location: maildir:%h/Maildir maildir_copy_with_hardlinks: yes umask: 7 mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/imap mail_plugin_dir(imap): /usr/lib/dovecot/imap mail_plugin_dir(pop3): /usr/lib/dovecot/pop3 pop3_uidl_format(default): pop3_uidl_format(imap): pop3_uidl_format(pop3): %u auth default: mechanisms: login plain user: nobody passdb: driver: ldap args: /etc/dovecot-ldap.conf userdb: driver: ldap args: /etc/dovecot-ldap.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vmail group: vmail I am trying to get a vacation autoresponder to work, but I was not able to. Everything else is working fine. Spam scripts work, forward scripts work, ... but vacation does not work. I have tried different configurations, simple: require "vacation"; vacation "I am currently testing the vacation autoresponder."; And a little more complex: require ["fileinto", "vacation"]; ## Move spam to spam folder if exists "X-Spam-Flag" { fileinto "spam.incoming"; # Stop here so that we do not reply on spams stop; } vacation # Reply at most once a day to a same sender :days 1 :subject "Out of office reply test" # List of recipient addresses which are included in the auto replying. # If a mail's recipient is not on this list, no vacation reply is sent for it. :addresses ["iaslanidis(a)flumotion.com"] "I'm testing the vacation autoresponder."; The script gets compiled as I have checked the dates and the .dovecot.lda-dupes gets created; however, there is no autoreply message. Additionally, I noticed that my recipient e-mail address gets added to .dovecot.lda-dupes: # cat .dovecot.lda-dupes � �H+�� ,tԾD+��iaslanidis(a)flumotion.com And, I also noticed that, if I delete this file and I send an e-mail to that address, I receive the e-mail duplicated, but only the first time, before .dovecot.lda-dupes gets created. I checked the mail headers of the e-mail upon reception and they seem fine: Return-Path: <aslanidis(a)gmail.com> X-Original-To: iaslanidis(a)flumotion.com Delivered-To: iaslanidis(a)flumotion.com Received: from wr-out-0506.google.com (wr-out-0506.google.com [64.233.184.232]) by mail.fluendo.com (Postfix) with ESMTP id E5777250133 for <iaslanidis(a)flumotion.com>; Fri, 18 Jul 2008 17:48:30 +0200 (CEST) Received: by wr-out-0506.google.com with SMTP id c49so243003wra.19 for <iaslanidis(a)flumotion.com>; Fri, 18 Jul 2008 08:48:29 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from:to :subject:mime-version:content-type:content-transfer-encoding :content-disposition; bh=iMPULXt7n6+6MVu47vQWBga4lMRSIYkfGnO59XcugXQ=; b=bLLBZZxblyF2LFTPMXPgVesAM/Ep/P5GwgN7aaGjd7JFVpXBBNU7Mq4OaeNbFZRzIN jk+wgDl3uvAg3GkhOso7+kxAI+SOe/u8nDBzzCp5muKieMC5xe84gJOh0+bviaaoahDf vxKWX9e/BTvBkq1AOTOfTnlHRONQ00aoNza44= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:mime-version:content-type :content-transfer-encoding:content-disposition; b=PgczmkJcZnKNF2sIhkrPgtbt9OJaNjYVXeJ5498WjvodyiY97ZQEpTFjXoFrM3RWGI EsRDyre253LVRbBJIZses3nbJLWGCQ9aebPnJQMQr6I1dnNL8AIqB6oMjIDp43Yjlj30 muP/LU0PigmTrnsy9+k9kWEy0MRG+ehBBUgn0= Received: by 10.90.101.17 with SMTP id y17mr289500agb.72.1216396109274; Fri, 18 Jul 2008 08:48:29 -0700 (PDT) Received: by 10.90.99.17 with HTTP; Fri, 18 Jul 2008 08:48:29 -0700 (PDT) Message-ID: <ea440b1d0807180848l106e0f08pace1ab165d143ee2(a)mail.gmail.com> Date: Fri, 18 Jul 2008 17:48:29 +0200 From: "Ioannis Aslanidis" <aslanidis(a)gmail.com> To: iaslanidis(a)flumotion.com Subject: Test 12 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Content-Disposition: inline X-Virus-Scanned: ClamAV using ClamSMTP -- Ioannis Aslanidis I would really like to have this solved as soon as possible, so any help is greatly welcome. If you require any further information, please, do not hesitate to contact me. Thanks in advance for your prompt reply. Regards, Ioannis

4 4

Re: [Dovecot] changing INTERNALDATE or similar
by Karl Rudnick 18 Jul '08

18 Jul '08

Looking at the IMAP4rev1 protocol (RFC 2060), we have the following definition: INTERNALDATE The internal date of the message. 2.3.3. Internal Date Message Attribute The internal date and time of the message on the server. This is not the date and time in the [RFC-822] header, but rather a date and time which reflects when the message was received. In the case of messages delivered via [SMTP], this SHOULD be the date and time of final delivery of the message as defined by [SMTP]. In the case of messages delivered by the IMAP4rev1 COPY command, this SHOULD be the internal date and time of the source message. In the case of messages delivered by the IMAP4rev1 APPEND command, this SHOULD be the date and time as specified in the APPEND command description. All other cases are implementation defined. How could any implementation of this protocol possibly use a file system time stamp to represent that important piece of meta-data, no matter where the file lives? It seems totally reasonable that this is what Outlook uses for the Received date (and I rarely defend Microsoft). This seems like a real design flaw in the dovecot implementation. I am fairly new to dovecot (and like many aspects of it over uw-imap), but having to really be careful with my mail store's mtimes borders on the absurd. I realize it is "implementation defined", but the intent of the definition surely does not refer to file system time stamps. Any chance this can be reconsidered? Is this an actual dovecot issue or a more general Maildir issue? On Fri, 2008-07-18 at 02:00 -0700, dovecot-request(a)dovecot.org wrote: > ------------------------------ > > Message: 4 > Date: Thu, 17 Jul 2008 23:12:55 +0300 > From: Timo Sirainen <tss(a)iki.fi> > Subject: Re: [Dovecot] changing INTERNALDATE or similar > To: richs(a)whidbey.net > Cc: Dovecot Mailing List <dovecot(a)dovecot.org> > Message-ID: <1216325575.31765.349.camel@hurina> > Content-Type: text/plain; charset="utf-8" > > On Thu, 2008-07-17 at 13:04 -0700, richs(a)whidbey.net wrote: > > I believe it's still true that any mail files that are IMAP STORE'd > > (uploaded) > > You mean IMAP APPENDed. > > > to Dovecot by a client will have a current mtime, rather than > > the "Date" in the message. That means might need to compare mtime's > to > > "Date" headers for new files that appear too. > > This is only because the client doesn't specify the date to APPEND > command. > > > Here we just patched Dovecot to treat "INTERNALDATE" the same as the > > "Date" header. Constantly verifying mtime's became too much of a > chore > > for those clients that rely on it (although this technically is > against > > the RFC). > > Would probably have been better to set the default INTERNALDATE based > on > the Date: header in APPEND command. Should be pretty easy to do with > Maildir I think.

3 5

[Dovecot] v1.1.0 released
by Timo Sirainen 18 Jul '08

18 Jul '08

http://dovecot.org/releases/1.1/dovecot-1.1.0.tar.gz http://dovecot.org/releases/1.1/dovecot-1.1.0.tar.gz.sig Two hours later than promised, I slept longer than intended. :) No changes since v1.1.rc13. Below are the largest changes since v1.0: * After Dovecot v1.1 has modified index or dovecot-uidlist files, they can't be opened anymore with Dovecot versions earlier than v1.0.2. * See doc/wiki/Upgrading.1.1.txt (or for latest changes, http://wiki.dovecot.org/Upgrading/1.1) for list of changes since v1.0 that you should be aware of when upgrading. + IMAP: Added support for UIDPLUS and LIST-EXTENDED extensions. + IMAP SORT: Sort keys are indexed, which makes SORT commands faster. + When saving messages, update cache file immediately with the data that we expect client to fetch later. + NFS caches are are flushed whenever needed. See mail_nfs_storage and mail_nfs_index settings. + Out of order command execution (SEARCH, FETCH, LIST), nonstandard command cancellation (X-CANCEL <tag>) + IMAP: STATUS-IN-LIST draft implementation + Expire plugin can be used to keep track of oldest messages in specific mailboxes. A nightly run can then quickly expunge old messages from the mailboxes that have them. The tracking is done using lib-dict, so you can use either Berkeley DB or SQL database. + Namespaces are supported everywhere now. + Namespaces have new list and subscriptions settings. + Full text search indexing support with Lucene and Squat backends. + OTP and S/KEY authentication mechanisms (by Andrey Panin). + mbox and Maildir works with both Maildir++ and FS layouts. You can change these by appending :LAYOUT=maildir++ or :LAYOUT=fs to mail_location. + LDAP: Support templates in pass_attrs and user_attrs + Support for listening in multiple IPs/ports. + Quota plugin rewrite: Support for multiple quota roots, warnings, allow giving storage size in bytes or kilo/mega/giga/terabytes, per-mailbox quota rules. + Filesystem quota backend supports inode limits, group quota and RPC quota for NFS. + SEARCH and SORT finally compare non-ASCII characters case-insensitively. We use i;unicode-casemap algorithm. + Config files support splitting values to multiple lines with \

12 26

[Dovecot] Kerberos check logic incorrect
by Bryan Jacobs 18 Jul '08

18 Jul '08

In configure.in, there is a check that does `krb5-config --version | grep -v 1\.2`, making sure there is no "1.2" in the version of Kerberos in use. This is to prevent compiling against MIT Kerberos version 1.2, which is too old for Dovecot. Unfortunately for this idea, Heimdal 1.2.1 is out. And Dovecot builds fine against it. Whoever committed this check also appears to have removed the comment warning that it was broken, to add insult to injury. Please fix your checks to be for FEATURES, not version numbers. You never know when something else that correctly implements the features you want will come along. Bryan Jacobs

2 1

Re: [Dovecot] changing INTERNALDATE or similar
by Rudnick, Karl 18 Jul '08

18 Jul '08

I successfully executed the script which "fixed" my mail store. I also see now why there isn't a buttoned down solution out there. The basic steps are simple as outlined below, but when dealing with ~35,000 emails going back before 1993, there were just about a dozen that didn't adhere to the "Date:" screening and subsequent capture for use by "touch --date". Adding these exceptions to my script completely automated the INTERNALDATE resetting, but I would not publish this publicly on the internet. Nevertheless, I would share it with anyone who requests through this mail group given the caveat that it is only guaranteed to work for MY personal data store. Thanks - Karl -----Original Message----- From: Rudnick, Karl Sent: Thursday, July 17, 2008 9:06 AM To: dovecot(a)dovecot.org Cc: Timo Sirainen Subject: RE: [Dovecot] changing INTERNALDATE or similar Terrific - I'll just write a script to: 1. create a list of all Maildir folders ending in "/cur" 2. remove dovecot.index* in each folder 3. For each mail file in each Mailder /cur folder: a. grep/sed "Date:" to grab first date/time stamp in email b. pipe the output of a. into "touch --date" for that file On my windows side, all the imap info is saved in one pst file in "C:\Documents and Settings\<user>\Local Settings\Application Data\Microsoft\Outlook\Outlook*imap*.pst" and if I blow it away it gets correctly rebuilt - I just tested it and the blown away index files get rebuilt so that Outlook then has the correct Received date displayed. Pretty easy to do, but surprised a script wasn't openly available - or at least my googling skills weren't good enough. Since I have ~35,000 emails in about 450 folders, this needs to be scripted. I'll make it available when I get it smoothed out. Thanks again for the clarification. - Karl -----Original Message----- From: Timo Sirainen [mailto:tss@iki.fi] Sent: Thursday, July 17, 2008 4:58 AM To: Rudnick, Karl; Dovecot Mailing List Subject: Re: [Dovecot] changing INTERNALDATE or similar On Wed, 2008-07-16 at 16:56 -0700, Karl Rudnick wrote: > I have a question which others must have encountered. I switched from > uw-imap to dovecot-imap a few months ago and moved my fairly large mail > archive (~15 yrs) by simply mounting both accounts in a mail app and > simply copying my folders over. This worked well, and all my mail is in > order when I view it in evolution or thunderbird on any number of > machines. However, since our company uses MS Exchange Server, when I add > my dovecot imap account to outlook, everything is great except the > received dates - it looks like the date I made the transition, but in > all instances it's not simply the time stamp in the Maildir folder. I > googled around on this and have gathered that this date is coming > somewhere from within the dovecot index file. INTERNALDATE comes from the maildir files' mtimes. So you can use whatever utility/script you want to modify the mtime (I don't have any suggestions). Then delete dovecot.index.cache file to make sure the old value wasn't cached. You might also have to recreate the account in your clients to make sure they haven't cached the old values.

1 0

[Dovecot] changing INTERNALDATE or similar
by Karl Rudnick 17 Jul '08

17 Jul '08

I have a question which others must have encountered. I switched from uw-imap to dovecot-imap a few months ago and moved my fairly large mail archive (~15 yrs) by simply mounting both accounts in a mail app and simply copying my folders over. This worked well, and all my mail is in order when I view it in evolution or thunderbird on any number of machines. However, since our company uses MS Exchange Server, when I add my dovecot imap account to outlook, everything is great except the received dates - it looks like the date I made the transition, but in all instances it's not simply the time stamp in the Maildir folder. I googled around on this and have gathered that this date is coming somewhere from within the dovecot index file. Is there a utility for scanning that so I can ascertain where the date shown in Outlook is coming from? Is there also a utility which would just reset the INTERNALDATE (or whatever it is that Outlook is keying on) to the date in the message on the "Date: ..." line? This issue is not life threatening as I don't use Outlook much, but when I do, it is confusing to not have the "Received" column be meaningful, especially for sorting. Thanks for any help - Karl

4 4

[Dovecot] Change text from default overquota message - Possible?
by k bah 17 Jul '08

17 Jul '08

I'm using Dovecot 1.0.5-6 (SuSE 10.3) and using dovecot deliver. Is it possible to change the subject/body of the default overquota message (it says "Automatically rejected mail" on the subject) and also the text from the message? I don't wan't to "hack" anything, just if it's possible to do by editing config files. thanks = Web-Based Privileges Certification Quickly setup a collaborative Web-based facility for business managers to certify authorizations and IT privileges. Satisfy requirements for SOX, HIPAA, Privacy, and other regulations. http://a8-asy.a8ww.net/a8-ads/adftrclick?redirectid=a526c7aa7690b483fc8ec20… -- Powered by Outblaze

2 1

[Dovecot] thanks
by Andrew Schulman 17 Jul '08

17 Jul '08

Here's just a note of thanks to the developers of Dovecot. I first starting using just the Dovecot IMAP server about a year ago, and it's been working fine for that. More recently I've started to use the managesieve and LDA components as well, and what I find now is that this system works well and is straightforward to configure, well-integrated, and relatively well documented. Also, the LDA has a significantly stronger set of sieve capabilities than exim's. All in all, Dovecot is doing a lot of work for me now and doing it well. Hats off to the developers. Andrew.

1 0

[Dovecot] question dbox folders subscription
by Robert Schetterer 17 Jul '08

17 Jul '08

Hi, creating a imap dbox folder and deletion now works with thunderbird, but the subscription file seems not be updated ,somekind. After the deletion of a folder it apears again after restart thunderbird .Then ,by click on it , you get message , folder not exists ( which is true ) but for disapaer the folder must be be manually unsubscribed. this isnt the same behavior like i.e with maildir with maildir the deleted folder shows up too, after restart, but with clicking on it, it disapaers without any message to tb anyone an idea to this? -- Best Regards MfG Robert Schetterer Germany/Munich/Bavaria

2 3

[Dovecot] child xxxxx (imap) returned error 83 (Out of memory)
by martin f krafft 17 Jul '08

17 Jul '08

Hi list, > Jul 17 12:15:10 seamus dovecot: IMAP(someone(a)somehost.org): block_alloc(): Out of memory > Jul 17 12:15:10 seamus dovecot: child 26181 (imap) returned error 83 (Out of memory) I found those two entries in the logs this morning. The system has ample free memory. What's going on? -- martin | http://madduck.net/ | http://two.sentenc.es/ "i wish i hadn't slept all day, it's really lowered my productivity" -- robert mcqueen spamtraps: madduck.bogus(a)madduck.net

2 3

[Dovecot] folder deletion fails dbox
by Robert Schetterer 17 Jul '08

17 Jul '08

Hi Timo, playing a lot with dbox but folder deletion seems to me broken, whatever setting i tested i cant delete subfolders with thunderbird, i first thought about acls but deactivate acl didnt helped splitting control an index files from dbox also didnt work, i cant find any failure message in the logs, but there is also no entry for delete trys all debug level are in the highest stage on this testing server i used the last 1.1.1 from the debian rep wich is brand new from tonight as your expansion patch from %d with deliver is included and works -- Best Regards MfG Robert Schetterer Germany/Munich/Bavaria

1 2

[Dovecot] antispam plugin, amavis and sa-learn
by Johannes Bauer 16 Jul '08

16 Jul '08

Hello, I would like to use the Dovecot antispam plugin to train SpamAssassin via sa-learn. I compiled the plugin and got it to work with the sendmail backend, which I tested by having it send a message to me. As I'm calling SpamAssassin with amavisd-new, I have a system-wide Bayes db, maintained by the amavis user. As expected, the antispam plugin calls the configured binary as the mail user (I'm running deliver as suid, with mixed virtual and system accounts). My question is: How can I get the plugin to call sa-learn as user amavis? I have tried the following things: (1) making the amavis user's .spamassassin directory to world-writeable and handing the path to sa-learn with the --dbpath parameter. That failed - the IMAP client says "Move not allowed" when I try to move a message to or from the Spam IMAP folder. (2) making a suid copy of sa-learn with owner amavis. This failed because of an sperl error. (3) editing sudoers to allow 'sudo -u amavis sa-learn' without a password. This works fine on the command line, but fails with the same error as (1) when used with the plugin. Although I compiled the plugin from git with debugging to syslog activated, I do not get any error messages in mail.log where all messages from dovecot are logged. Now, I know that the methods above aren't exactly secure, so if anybody has a different way of training SpamAssassin with the antispam plugin in a amavis setup, I would appreciate it. Thank you, Johannes

5 10

[Dovecot] fd limit 1024 is lower in dovecot-1.1.1
by Zhang Huangbin 16 Jul '08

16 Jul '08

Hi, all. I just upgrade from 1.0.15 to 1.1.1 in a test box(RHEL 5.2, x86_64). after upgrade, i got this warning msg: ----8< ---- # /etc/init.d/dovecot restart Stopping Dovecot Imap: [ OK ] Starting Dovecot Imap: Warning: fd limit 1024 is lower than what Dovecot can use under full load (more than 1280). Either grow the limit or change login_max_processes_count and max_mail_processes settings [ OK ] ----8< ---- but i changed either login_max_processes_count and max_mail_processes to 2048, it raised the same msg. How can i solove this issue? Thanks very much. My dovecot -n output: ----8<---- # dovecot -n # 1.1.1: /etc/dovecot.conf Warning: fd limit 1024 is lower than what Dovecot can use under full load (more than 1280). Either grow the limit or change login_max_processes_count and max_mail_processes settings log_path: /var/log/dovecot.log protocols: pop3 pop3s imap imaps listen: * ssl_cert_file: /etc/pki/dovecot/certs/dovecotCert.pem ssl_key_file: /etc/pki/dovecot/private/dovecotKey.pem login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login max_mail_processes: 1024 mail_uid: 2000 mail_gid: 2000 mail_location: maildir:/%Lh/%Ld/%Ln/:INDEX=/%Lh/%Ld/%Ln/ mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(pop3): quota mail_plugin_dir(default): /usr/lib64/dovecot/imap mail_plugin_dir(imap): /usr/lib64/dovecot/imap mail_plugin_dir(pop3): /usr/lib64/dovecot/pop3 pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh auth default: mechanisms: plain login user: vmail passdb: driver: sql args: /etc/dovecot-mysql.conf userdb: driver: sql args: /etc/dovecot-mysql.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 432 user: vmail group: vmail -- Best Regards. Zhang Huangbin - Mail Server Solution for Red Hat(R) Enterprise Linux & CentOS 5.x: http://rhms.googlecode.com/

4 5

[Dovecot] fs quota check with server does not support, rquotad
by Grandy Fu 16 Jul '08

16 Jul '08

I think the problem is in these few lines: ---------------------------- dovecot: Jul 15 18:13:21 Info: IMAP(01234567g): fs quota add storage dir = /home/h1/sc/01234567g/mail dovecot: Jul 15 18:13:21 Info: IMAP(01234567g): fs quota block device = homesvr:/h1 dovecot: Jul 15 18:13:21 Info: IMAP(01234567g): fs quota mount point = /home/h1 ---------------------------------- Since my configuration file only have plugin { quota = fs:INBOX:mount=/var/mail } shouldn't /home/h1 be just ignored? Or there are some parameters in "quota=" to ignore this mount point? Grandy

1 0

[Dovecot] Maildir folder renaming disagreement among IMAP clients
by Adam McDougall 16 Jul '08

16 Jul '08

A user alerted me to a problem when he renamed an upper level mail folder and lost access to a lower level folder under it. I tried with and without listescape, it didn't seem to make a difference, and I saw no errors in the dovecot log. Symptoms are if a client has a maildir folder tree .a and .a.b and renames a to c in their client, Thunderbird shows c/b but b is inaccessible since it is still actually .a.b on the filesystem, unsubscribed but accessible if you go subscribe to it. Outlook Express seems to behave the same except it cannot access "b" (.a.b) at all now because "a" no longer exists. Subscribe window shows it, but you cannot subscribe (as expected for OE). According to the rawlog, Thunderbird just tries to rename the top level folder and change subscriptions, but doesn't rename other maildirs to match the new top level folder. On the other hand, Outlook seems to rename and subscribe the top folder and subfolders properly. Who is right, should the mail client be doing all the work, or should dovecot be doing more, or do I have something setup wrong? I'm pasting what I think are essentials from the rawlogs, and my dovecot -n. Thanks for any input. tbird: in: 23 lsub "" "zoinks2/*" 24 close 25 rename "zoinks2" "zoinks3" 26 subscribe "zoinks3" 27 unsubscribe "zoinks2" 28 subscribe "zoinks3/z2" 29 unsubscribe "zoinks2/z2" out: * LSUB () "/" "zoinks2/z2" 23 OK Lsub completed. 24 OK Close completed. 25 OK Rename completed. 26 OK Subscribe completed. 27 OK Unsubscribe completed. 28 NO [TRYCREATE] Mailbox doesn't exist: zoinks3/z2 29 OK Unsubscribe completed. outlook: in: d7oy LIST "" "INBOX" 089m LSUB "" "zoinks3/*" uh2o LSUB "" "*" buaw SELECT "" b51w LSUB "" "zoinks3" fivz RENAME "zoinks3" "zoinks2" 6n3p LIST "" "zoinks3/*" chbh RENAME "zoinks3/z2" "zoinks2/z2" 3hjt UNSUBSCRIBE "zoinks3/z2" xlnc SUBSCRIBE "zoinks2/z2" yyep UNSUBSCRIBE "zoinks3" 6gt2 SUBSCRIBE "zoinks2" mvzq IDLE out: * LSUB () "/" "zoinks3/z2" 089m OK Lsub completed. uh2o OK Lsub completed. buaw NO Invalid mailbox name * LSUB () "/" "zoinks3" b51w OK Lsub completed. fivz OK Rename completed. * LIST (\HasNoChildren) "/" "zoinks3/z2" 6n3p OK List completed. chbh OK Rename completed. 3hjt OK Unsubscribe completed. xlnc OK Subscribe completed. yyep OK Unsubscribe completed. 6gt2 OK Subscribe completed. # 1.1.1: /usr/local/etc/dovecot.conf ssl_cert_file: /usr/local/etc/apache22/ssl/mail.pem ssl_key_file: /usr/local/etc/apache22/ssl/mail.pem login_dir: /var/run/dovecot/login login_executable: /usr/local/libexec/dovecot/imap-login login_max_processes_count: 512 max_mail_processes: 1024 mail_max_userip_connections: 25 verbose_proctitle: yes first_valid_uid: 1000 first_valid_gid: 1000 mail_access_groups: postlocal mail_location: maildir:%h/Maildir:CONTROL=%h/Maildir/dovecot/private/control:INDEX=%h/Maildir/dovecot/private/indexes mmap_disable: yes mail_nfs_storage: yes mail_nfs_index: yes mail_drop_priv_before_exec: yes mail_executable: /usr/local/libexec/dovecot/rawlog /usr/local/libexec/dovecot/imap mail_process_size: 1024 mail_plugins: acl fts fts_squat listescape quota imap_quota mail_log_max_lines_per_sec: 0 imap_client_workarounds: delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep namespace: type: private separator: / inbox: yes list: yes subscriptions: yes namespace: type: private separator: / prefix: mail/ hidden: yes subscriptions: yes namespace: type: private separator: / prefix: Mail/ hidden: yes subscriptions: yes auth default: passdb: driver: pam userdb: driver: passwd args: system_user= socket: type: listen client: path: /var/spool/postfix/private/auth mode: 384 user: postfix group: postfix plugin: quota: fs:noenforcing:inode_per_mail acl: vfile:/usr/local/etc/dovecot-acls:cache_secs=10 fts: squat

2 2

[Dovecot] Postfix+maildrop+deliver?
by Tom Fernandes 16 Jul '08

16 Jul '08

Hello, I currently use procmail without the deliver LDA but would like to switch to using deliver. I also would like to get away from procmail for various reasons. Otherwise I could use the procmail-patch from http://dovecot.org/pipermail/dovecot/2006-July/014656.html AFAICS. I don't want to use sieve because it's too limited and can't see a similar patch like the one for procmail available for maildrop. What setup would I use for Postfix+maildrop+deliver? thanks, Tom

2 2

Re: [Dovecot] Root folder path problem
by Yavuz Maslak 15 Jul '08

15 Jul '08

As I said previous my mail, if I don't set any value in "Root folder path" option, my sent mails are stored in main "sent items" of Outlook Express. These mails aren't stored "sent items" of imap section. On Sat, 2008-07-12 at 22:18 +0300, Yavuz Maslak wrote: > I use dovecot1.x. for imap on qmail. > I also use OExpress to receive my mails. > My sent mails is stored in main "sent items" of Outlook Express. OK. > Therefore I set "INBOX" in "Root folder path" option. Why? My guess is that it doesn't work because you set this.

7 9

[Dovecot] dbox and quota question
by Robert Schetterer 15 Jul '08

15 Jul '08

Hi all, i am asking myself how quota is done with dbox in a virtual setup with having quotas in sql dove 1.1.1 says quota maildir: No maildir storages, ignoring quota lda means quota maildir: No maildir storages, ignoring quota which is right i dont wanna use dict , i only wanna use the qutoas out of sql crated by postfixadmin has someone used this ever ? -- Best Regards MfG Robert Schetterer Germany/Munich/Bavaria

3 14

[Dovecot] ACL in sub-folders
by Imobach González Sosa 14 Jul '08

14 Jul '08

Hi all, I've set up some shared folders and I'm controlling the access to them with the ACL plugin. As far as I know, ACL rules are not applied to sub-folders, right? So, when a user adds a new sub-folder, I need to add a dovecot-acl file granting read permissions to others users, right? Does exists any way to implement it using some dovecot feature? Or must I find my way? Just to be sure :) Thank you in advance. -- Imobach González Sosa Banot.net http://www.banot.net/

1 0

Re: [Dovecot] thunderbird sane config (OT)
by Moser 14 Jul '08

14 Jul '08

Charles Marcus schrieb: > On 5/7/2008, rosenfield.albert(a)gmail.com (rosenfield.albert(a)gmail.com) > wrote: >> (Background: I'm currently experiencing that Thunderbird does not work >> against Postfix/Dovecot because the wizard interface for setting up an >> account does not accept TLS-only servers. Users just sit there with a >> broken Thunderbird, not knowing what to do :-/.) you can do it. > It would be nice if you had the ability to access the Advanced Options > when setting up a new account in TBird, but currently you don't... Not true! simple way: Just change the default config TB create your account from with the settings you need. You can find the file under your program dir i.e. C:\Programme\Mozilla Thunderbird\defaults\pref Compare the defaults to your working set of setting and change them accordingly. You can activate TLS or CRAM-MD5 and so an. You can also predefine LDAP servers etc. more elaborated way: Mozilla Mission Contol: -> http://developer.mozilla.org/en/docs/MCD,_Mission_Control_Desktop_AKA_AutoC… Hope it helps! Hans

1 0

Re: [Dovecot] dovecot Digest, Vol 63, Issue 30
by Grandy Fu 14 Jul '08

14 Jul '08

> It seems that a RPC call fails because rquotas are not supported on > 'homesvr'. But dovecots quota-fs requires them for remote storage. > Yes, my homesvr does not support RPC rquotas. Acutally I really don't want Dovecot to handle quota on my home directory, I only want Dovecot to hand quota on /var/mail. That's why I put "noenforcing" in configuration file. If I didn't put "noenforcing", Dovecot can't even display quota information on /var/mail. My question is isn't "noenforcing" can tell Dovecot to ignore that mount point? It works when querying quota status but not when modifying mail folder on that mount point. Grandy

4 4

[Dovecot] Dovecot Crash
by Horn Wijaya 14 Jul '08

14 Jul '08

Jul 13 08:19:15 hera dovecot: fstat 75 : Value too large for defined data type Jul 13 08:19:18 hera dovecot: fstat 75 : Value too large for defined data type Jul 13 08:19:20 hera dovecot: fstat 75 : Value too large for defined data type Jul 13 08:19:27 hera dovecot: fstat 75 : Value too large for defined data type Jul 13 08:19:27 hera dovecot: fstat 75 : Value too large for defined data type Jul 13 08:19:30 hera dovecot: fstat 75 : Value too large for defined data type Jul 13 08:19:31 hera dovecot: fstat 75 : Value too large for defined data type Jul 13 08:19:34 hera dovecot: fstat 75 : Value too large for defined data type Jul 13 08:19:34 hera dovecot: fstat 75 : Value too large for defined data type Jul 13 08:19:35 hera dovecot: fstat 75 : Value too large for defined data type Jul 13 08:19:36 hera dovecot: fstat 75 : Value too large for defined data type Jul 13 08:19:44 hera dovecot: fstat 75 : Value too large for defined data type Hi All, I hope someone could help me with this. 1.1.RC4 is the version. I am in the middle of upgrading to 1.1.1 Hope that helps If there's any info for me, please let me know. Desperately panicking, hundreds of clients screaming. Thanks. ------------------------------------------ Warmest Regards From: Horn Wijaya Consultant hwijaya(a)nodens.biz http://www.nodens.biz/ Nodens Solutions Pte Ltd "where there is freedom in your choice"

4 9

[Dovecot] Overquota bounce
by Davide Pasquale 14 Jul '08

14 Jul '08

Hi all, I have implemented a mail system with postfix and dovecot as LDA. Users who have exceeded their quota when receiving messages dont'see the message bounced. I see this error in maillog: dsn=4.3.0, status=deferred (temporary failure) This is my configuration: protocol imap { mail_plugins = quota imap_quota login_executable = /usr/local/libexec/dovecot/imap-login mail_executable = /usr/local/libexec/dovecot/imap } protocol pop3 { mail_plugins = quota login_executable = /usr/local/libexec/dovecot/pop3-login mail_executable = /usr/local/libexec/dovecot/pop3 } plugin { quota = maildir:storage=10240 } protocol lda { mail_plugins = quota postmaster_address = postmaster(a)mydomain.com auth_socket_path = /var/run/dovecot/auth-master } Thanks very much. Davide.

2 2