- dovecot - dovecot.org

[Dovecot] 60 seconds problem
by Waheed Rahuman 17 Jun '07

17 Jun '07

I am using Dovecot-1.0-0_27.rc10.e14. And when try to login with outlook there is an error saying "You server did not respond do u want to try again in 60 seconds" Any solutions please help regards Waheed

2 1

Re: [Dovecot] Per user based protocol access and pause after failed login?
by Mart Pirita 17 Jun '07

17 Jun '07

Tere. > %c expands to "secured" or empty. So you could use eg. > passdb pam { > args = %s%c > } > > and create imap, imapsecured, pop3, pop3secured > > More better, so for example user1 can access only imaps, using Yous suggestion, I have to list all users, except user1 in imap, pop3, pop3secured. But it should works also in other way, that by default all users are allowed to use all protocols and then I exclude user1 from imap, pop3, pop3secured. So I tried: passdb pam { args = %s%c } /etc/pam.d/ includes imap, imapsecured, pop3, pop3secured files which includes: auth required pam_nologin.so auth required pam_stack.so service=system-auth account required pam_stack.so service=system-auth session required pam_stack.so service=system-auth and only imapsecured has this line: auth required pam_listfile.so item=user sense=deny file=/etc/imapsusers onerr=succeed and /etc/imapsusers includes user1 But now even pop user can't login:(. -- Mart

2 1

[Dovecot] using 'socat' to relay Dovecot SASL's auth socket over TCP?
by snowcrash 17 Jun '07

17 Jun '07

hi, i've been running Exim & Dovecot together on the same box. Exim's been sharing Dovecot/SASL auth info over a local unix socket. works great. i'm now splitting Exim & Dovecot onto two different boxes. iiuc, Dovecot ONLY provides a UNIX (local) socket; *not* a TCP socket for over-the-network access. SUre, I could mount the Dovecot socket's volume over NFS ... but just don't want to go there. i've just discovered, socat - Multipurpose relay http://www.dest-unreach.org/socat/ "Socat is a command line based utility that establishes two bidirectional byte streams and transfers data between them. Because the streams can be constructed from a large set of different types of data sinks and sources (see address types), and because lots of address options may be applied to the streams, socat can be used for many different purposes. It might be one of the tools that one `has already needed'." which, iiuc (?), can bidirectionally bridge the Dovecot unix-socket to a TCP socket that Exim can talk/listen to. reading further, "address types" (http://www.dest-unreach.org/socat/doc/socat.html#ADDRESS_TYPES) seem to include BOTH unix & tcp sockets ... can anyone here comment further on this? known to work? possible? no way? etc etc thanks!

2 1

[Dovecot] index
by Lucas -LandM- 17 Jun '07

17 Jun '07

Hi, First of all congratulations for you development. It´s really good. We have a customer that has a copy of all inbound and outbound mail in an account. When he tries to open the mail, the process of index all mail consume all cpu and memory. How can we avoid this kinds of things? Thank you in advance, Lucas

4 7

Re: [Dovecot] dovecot under attack
by Dani 16 Jun '07

16 Jun '07

A Dissabte 16 Juny 2007 16:10, Jon Slater va escriure: > Hi, > > I’ve posted this before but no one was able to help. I can’t figure > out what they are trying to do, and if I should be concerned. > I am running dovecot version 0.99.14 on Fedora Core 4. It appears > that my dovecot server is under attack. This morning in my system > e-mail I saw this: Hi Jon, just my 5 cents, eventually you can figure out if they are trying to login directly to you imap/pop3 ports or maybe through a webmail? In every case why don't you give a try to a fail2ban program to block automatically login failures through iptables and of course upgrade your dovecot's installation? http://drees76.blogspot.com/2006/08/fail2ban-dovecot-and-brute-force.html greetings, dani

1 0

[Dovecot] 1st DOVECOT installation automatically quitting on login
by Benton Haynes 16 Jun '07

16 Jun '07

Hi there. I have just installed DOVECOT 1.0.1 for the first time. After launching it, I can verify that ps -ax | grep -i dovecot 1052 ?? Ss 0:00.03 /usr/local/dovecot/sbin/dovecot -c /etc/dovecot/dovecot.conf 1053 ?? S 0:00.06 dovecot-auth 1058 p2 R+ 0:00.01 grep -i dovecot ps -ax | grep -i imap 1054 ?? S 0:00.08 imap-login 1055 ?? S 0:00.08 imap-login 1056 ?? S 0:00.08 imap-login 1060 p2 R+ 0:00.01 grep -i imap Then, if I telnet to DOVECOT/IMAP & login telnet 192.168.1.30 143 Trying 192.168.1.30... Connected to 192.168.1.30. Escape character is '^]'. * OK [CAPABILITY IMAP4rev1 SASL-IR SORT THREAD=REFERENCES MULTIAPPEND UNSELECT LITERAL+ IDLE CHILDREN NAMESPACE LOGIN-REFERRALS QUOTA STARTTLS AUTH=PLAIN AUTH=DIGEST-MD5 AUTH=CRAM-MD5] haynes.name IMAP4 server ready x login ben(a)haynes.name benpass x OK Logged in. Connection closed by foreign host. ^^^^^^^^^^^^^^^^^^^ It disconnects automatically. In my dovecot.conf, I currently have defined verbose_ssl = no auth_verbose = no auth_debug = yes mail_debug = no And, in dovecot.log, I get only, dovecot: Jun 15 18:51:10 Info: auth(default): client in: AUTH 1 PLAIN service=IMAP lip=192.168.1.30 rip=192.168.1.3resp=<hidden> dovecot: Jun 15 18:51:10 Info: auth(default): passwd-file(user= ben(a)haynes.name,192.168.1.3) lookup: user=ben(a)haynes.namefile=/etc/dovecot/user.file dovecot: Jun 15 18:51:10 Info: auth(default): client out: OK 1 user=ben(a)haynes.name dovecot: Jun 15 18:51:10 Info: auth(default): master in: REQUEST 11054 1 dovecot: Jun 15 18:51:10 Info: auth(default): master out: USER 1 ben(a)haynes.name static uid=500 gid=500 home=/var/mail/imap/haynes.name/accounts/ben nice=10 dovecot: Jun 15 18:51:10 Info: imap-login: Login: user=<user=ben(a)haynes.name>, method=PLAIN, rip=192.168.1.3, lip=192.168.1.30 dovecot: Jun 15 18:51:14 Error: child 1064 (imap) killed with signal 4 Ihaven't been able to figure out why this is happening. Is there some more detailed debugging I should turn on? Any ideas why this is going on? -- Ben

2 4

Re: [Dovecot] dovecot under attack
by Mart Pirita 16 Jun '07

16 Jun '07

Tere. > > > Does anyone know what this is? Or someone I could ask? > > Normal dictionary attack? -- Mart

1 0

Re: [Dovecot] dovecot under attack
by Charles Marcus 16 Jun '07

16 Jun '07

Hi Jon, I cannot help with the specific question, but in my opinion, your first and primary goal should be to get that server updated to 1.0.1 asap... 0.99.x is no longer supported - and *very* dated... Jon Slater wrote: > Hi, > > > > I’ve posted this before but no one was able to help. I can’t figure out > what they are trying to do, and if I should be concerned. > > > > I am running dovecot version 0.99.14 on Fedora Core 4. It appears that my > dovecot server is under attack. This morning in my system e-mail I saw > this: > > > > dovecot: > > Authentication Failures: > > rhost= : 23431 Time(s) > > adm: 33 Time(s) > > bin: 33 Time(s) > > mail: 33 Time(s) > > mysql: 21 Time(s) > > nobody: 15 Time(s) > > news: 14 Time(s) > > operator: 8 Time(s) > > sshd: 2 Time(s) > > Unknown Entries: > > check pass; user unknown: 23431 Time(s) > > > > But, when I check my log files I can’t find an IP address for the attacker. > So, for example, if I search my logs for “operator” I see: > > ./messages:Jun 15 23:30:56 lambdacenter dovecot(pam_unix)[15512]: > authentication failure; logname= uid=0 euid=0 tty= ruser= rhost= > user=operator > > ./messages:Jun 15 23:31:00 lambdacenter dovecot(pam_unix)[15670]: > authentication failure; logname= uid=0 euid=0 tty= ruser= rhost= > user=operator > > ./messages:Jun 15 23:31:16 lambdacenter dovecot(pam_unix)[16332]: > authentication failure; logname= uid=0 euid=0 tty= ruser= rhost= > user=operator > > ./messages:Jun 15 23:31:20 lambdacenter dovecot(pam_unix)[16480]: > authentication failure; logname= uid=0 euid=0 tty= ruser= rhost= > user=operator > > ./messages:Jun 15 23:31:27 lambdacenter dovecot(pam_unix)[16695]: > authentication failure; logname= uid=0 euid=0 tty= ruser= rhost= > user=operator > > ./messages:Jun 15 23:31:38 lambdacenter dovecot(pam_unix)[16884]: > authentication failure; logname= uid=0 euid=0 tty= ruser= rhost= > user=operator > > ./messages:Jun 15 23:31:55 lambdacenter dovecot(pam_unix)[17080]: > authentication failure; logname= uid=0 euid=0 tty= ruser= rhost= > user=operator > > ./messages:Jun 15 23:32:11 lambdacenter dovecot(pam_unix)[17182]: > authentication failure; logname= uid=0 euid=0 tty= ruser= rhost= > user=operator > > ./audit/audit.log:type=USER_AUTH msg=audit(1181971858.967:156312): user > pid=15512 uid=0 auid=4294967295 msg='PAM authentication: user=operator > exe="/usr/libexec/dovecot/dovecot-auth" (hostname=?, addr=?, terminal=? > result=Authentication failure)' > > ./audit/audit.log:type=USER_AUTH msg=audit(1181971862.772:156382): user > pid=15670 uid=0 auid=4294967295 msg='PAM authentication: user=operator > exe="/usr/libexec/dovecot/dovecot-auth" (hostname=?, addr=?, terminal=? > result=Authentication failure)' > > ./audit/audit.log:type=USER_AUTH msg=audit(1181971878.710:156707): user > pid=16332 uid=0 auid=4294967295 msg='PAM authentication: user=operator > exe="/usr/libexec/dovecot/dovecot-auth" (hostname=?, addr=?, terminal=? > result=Authentication failure)' > > ./audit/audit.log:type=USER_AUTH msg=audit(1181971882.379:156775): user > pid=16480 uid=0 auid=4294967295 msg='PAM authentication: user=operator > exe="/usr/libexec/dovecot/dovecot-auth" (hostname=?, addr=?, terminal=? > result=Authentication failure)' > > ./audit/audit.log:type=USER_AUTH msg=audit(1181971908.712:156879): user > pid=16695 uid=0 auid=4294967295 msg='PAM authentication: user=operator > exe="/usr/libexec/dovecot/dovecot-auth" (hostname=?, addr=?, terminal=? > result=Authentication failure)' > > ./audit/audit.log:type=USER_AUTH msg=audit(1181972032.080:156904): user > pid=16884 uid=0 auid=4294967295 msg='PAM authentication: user=operator > exe="/usr/libexec/dovecot/dovecot-auth" (hostname=?, addr=?, terminal=? > result=Authentication failure)' > > ./audit/audit.log:type=USER_AUTH msg=audit(1181972047.607:156917): user > pid=17080 uid=0 auid=4294967295 msg='PAM authentication: user=operator > exe="/usr/libexec/dovecot/dovecot-auth" (hostname=?, addr=?, terminal=? > result=Authentication failure)' > > ./audit/audit.log:type=USER_AUTH msg=audit(1181972066.325:156928): user > pid=17182 uid=0 auid=4294967295 msg='PAM authentication: user=operator > exe="/usr/libexec/dovecot/dovecot-auth" (hostname=?, addr=?, terminal=? > result=Authentication failure)' > > > > I’ve checked my snmplog for port activity on port 110 (for POP3) and 143 > (for IMAP), but I don’t see anything unusual. I also systematically > filtered out everything I knew was okay (ssh, and httpd) . > > > > Does anyone know what this is? Or someone I could ask? > > > > Thanks!!!!!!!!!!!!!!!!!!!! > > > > Jon > > > No virus found in this outgoing message. > Checked by AVG Free Edition. > Version: 7.5.472 / Virus Database: 269.8.17/850 - Release Date: 6/15/2007 > 11:31 AM > >

1 0

[Dovecot] dovecot under attack
by Jon Slater 16 Jun '07

16 Jun '07

Hi, I’ve posted this before but no one was able to help. I can’t figure out what they are trying to do, and if I should be concerned. I am running dovecot version 0.99.14 on Fedora Core 4. It appears that my dovecot server is under attack. This morning in my system e-mail I saw this: dovecot: Authentication Failures: rhost= : 23431 Time(s) adm: 33 Time(s) bin: 33 Time(s) mail: 33 Time(s) mysql: 21 Time(s) nobody: 15 Time(s) news: 14 Time(s) operator: 8 Time(s) sshd: 2 Time(s) Unknown Entries: check pass; user unknown: 23431 Time(s) But, when I check my log files I can’t find an IP address for the attacker. So, for example, if I search my logs for “operator” I see: ./messages:Jun 15 23:30:56 lambdacenter dovecot(pam_unix)[15512]: authentication failure; logname= uid=0 euid=0 tty= ruser= rhost= user=operator ./messages:Jun 15 23:31:00 lambdacenter dovecot(pam_unix)[15670]: authentication failure; logname= uid=0 euid=0 tty= ruser= rhost= user=operator ./messages:Jun 15 23:31:16 lambdacenter dovecot(pam_unix)[16332]: authentication failure; logname= uid=0 euid=0 tty= ruser= rhost= user=operator ./messages:Jun 15 23:31:20 lambdacenter dovecot(pam_unix)[16480]: authentication failure; logname= uid=0 euid=0 tty= ruser= rhost= user=operator ./messages:Jun 15 23:31:27 lambdacenter dovecot(pam_unix)[16695]: authentication failure; logname= uid=0 euid=0 tty= ruser= rhost= user=operator ./messages:Jun 15 23:31:38 lambdacenter dovecot(pam_unix)[16884]: authentication failure; logname= uid=0 euid=0 tty= ruser= rhost= user=operator ./messages:Jun 15 23:31:55 lambdacenter dovecot(pam_unix)[17080]: authentication failure; logname= uid=0 euid=0 tty= ruser= rhost= user=operator ./messages:Jun 15 23:32:11 lambdacenter dovecot(pam_unix)[17182]: authentication failure; logname= uid=0 euid=0 tty= ruser= rhost= user=operator ./audit/audit.log:type=USER_AUTH msg=audit(1181971858.967:156312): user pid=15512 uid=0 auid=4294967295 msg='PAM authentication: user=operator exe="/usr/libexec/dovecot/dovecot-auth" (hostname=?, addr=?, terminal=? result=Authentication failure)' ./audit/audit.log:type=USER_AUTH msg=audit(1181971862.772:156382): user pid=15670 uid=0 auid=4294967295 msg='PAM authentication: user=operator exe="/usr/libexec/dovecot/dovecot-auth" (hostname=?, addr=?, terminal=? result=Authentication failure)' ./audit/audit.log:type=USER_AUTH msg=audit(1181971878.710:156707): user pid=16332 uid=0 auid=4294967295 msg='PAM authentication: user=operator exe="/usr/libexec/dovecot/dovecot-auth" (hostname=?, addr=?, terminal=? result=Authentication failure)' ./audit/audit.log:type=USER_AUTH msg=audit(1181971882.379:156775): user pid=16480 uid=0 auid=4294967295 msg='PAM authentication: user=operator exe="/usr/libexec/dovecot/dovecot-auth" (hostname=?, addr=?, terminal=? result=Authentication failure)' ./audit/audit.log:type=USER_AUTH msg=audit(1181971908.712:156879): user pid=16695 uid=0 auid=4294967295 msg='PAM authentication: user=operator exe="/usr/libexec/dovecot/dovecot-auth" (hostname=?, addr=?, terminal=? result=Authentication failure)' ./audit/audit.log:type=USER_AUTH msg=audit(1181972032.080:156904): user pid=16884 uid=0 auid=4294967295 msg='PAM authentication: user=operator exe="/usr/libexec/dovecot/dovecot-auth" (hostname=?, addr=?, terminal=? result=Authentication failure)' ./audit/audit.log:type=USER_AUTH msg=audit(1181972047.607:156917): user pid=17080 uid=0 auid=4294967295 msg='PAM authentication: user=operator exe="/usr/libexec/dovecot/dovecot-auth" (hostname=?, addr=?, terminal=? result=Authentication failure)' ./audit/audit.log:type=USER_AUTH msg=audit(1181972066.325:156928): user pid=17182 uid=0 auid=4294967295 msg='PAM authentication: user=operator exe="/usr/libexec/dovecot/dovecot-auth" (hostname=?, addr=?, terminal=? result=Authentication failure)' I’ve checked my snmplog for port activity on port 110 (for POP3) and 143 (for IMAP), but I don’t see anything unusual. I also systematically filtered out everything I knew was okay (ssh, and httpd) . Does anyone know what this is? Or someone I could ask? Thanks!!!!!!!!!!!!!!!!!!!! Jon No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.472 / Virus Database: 269.8.17/850 - Release Date: 6/15/2007 11:31 AM

1 0

[Dovecot] Per user based protocol access and pause after failed login?
by Mart Pirita 16 Jun '07

16 Jun '07

Hello. Tried search, no luck, sorry, if this is already answered, but I'm still looking a solution using pam_auth how to define in dovecot which user can access which protocol, for example, default is: protocols = pop3 pop3s imap imaps I'd like to use something like this: exclude_using_pop = user1, user2, @group exclude_using_pops = user1, user2, @group exclude_using_imap = user1, user2, @group exclude_using_imaps = user1, user2, @group The idea is security and also preventing imap user by accident logging in using pop3 and downloading (clearing inbox for imap) all inbox. And also some throttling, for example the adjustable time to pause access after failed login etc would be great. -- Mart

2 2

[Dovecot] SHA256 password patch
by Jasper Slits 16 Jun '07

16 Jun '07

Hi, I made a patch against branch-1.0 for SHA256 password hashing support for Dovecot. Courier Authlib supports this hashing scheme and in order to migrate from Courier to Dovecot, I've added SHA256 support to Dovecot. The attached patch is based on BSD licensed code from Olivier Gay (http://www.ouah.org/ogay/sha2/) Changes made by me in Olivier's sha2{.h,.c} code: - Prototype for sha256_transf is added to sha2.h - sha256_get_digest() is added to sha2{.h,.c} - Code for UNROLL_LOOPS is removed - Support for SHA224,SHA384,SHA512 was removed - Functions are renamed to match those in sha1{.h,.c} - SHA256_DIGEST_SIZE is renamed to SHA256_RESULTLEN I can add safe_memset calls if requested. Patch is attached and can also be found at http://www.malochia.nl/dovecot/sha256.patch Kind regards, Jasper diff -r -u -N --exclude=Makefile.in --exclude=.deps --exclude=Makefile src/auth/password-scheme.c auth/password-scheme.c --- src/auth/password-scheme.c 2007-02-21 13:30:38.756711250 +0100 +++ auth/password-scheme.c 2007-02-21 14:18:49.645380500 +0100 @@ -10,6 +10,7 @@ #include "mycrypt.h" #include "randgen.h" #include "sha1.h" +#include "sha2.h" #include "str.h" #include "password-scheme.h" @@ -153,6 +154,17 @@ return str_c(str); } +static const char *sha256_generate(const char *plaintext, + const char *user __attr_unused__) +{ + unsigned char digest[SHA256_RESULTLEN]; + string_t *str; + sha256_get_digest(plaintext, strlen(plaintext), digest); + str = t_str_new(MAX_BASE64_ENCODED_SIZE(sizeof(digest)+1)); + base64_encode(digest, sizeof(digest), str); + return str_c(str); +} + static const void * password_decode(const char *password, unsigned int result_len) { @@ -196,6 +208,23 @@ return memcmp(sha1_digest, data, SHA1_RESULTLEN) == 0; } +static bool sha256_verify(const char *plaintext, const char *password, + const char *user) +{ + unsigned char sha256_digest[SHA256_RESULTLEN]; + const char *data; + + sha256_get_digest(plaintext, strlen(plaintext), sha256_digest); + + data = password_decode(password, SHA256_RESULTLEN); + if (data == NULL) { + i_error("sha256_verify(%s): Invalid password encoding", user); + return 0; + } + + return memcmp(sha256_digest, data, SHA256_RESULTLEN) == 0; +} + static const char *ssha_generate(const char *plaintext, const char *user __attr_unused__) { @@ -466,6 +495,7 @@ { "MD5-CRYPT", md5_crypt_verify, md5_crypt_generate }, { "SHA", sha1_verify, sha1_generate }, { "SHA1", sha1_verify, sha1_generate }, + { "SHA256", sha256_verify, sha256_generate }, { "SMD5", smd5_verify, smd5_generate }, { "SSHA", ssha_verify, ssha_generate }, { "PLAIN", plain_verify, plain_generate }, diff -r -u -N --exclude=Makefile.in --exclude=.deps --exclude=Makefile src/lib/Makefile.am lib/Makefile.am --- src/lib/Makefile.am 2007-02-21 13:30:38.792713500 +0100 +++ lib/Makefile.am 2007-02-21 14:21:59.437241750 +0100 @@ -73,6 +73,7 @@ sendfile-util.c \ seq-range-array.c \ sha1.c \ + sha2.c \ str.c \ str-sanitize.c \ strescape.c \ @@ -146,6 +147,7 @@ sendfile-util.h \ seq-range-array.h \ sha1.h \ + sha2.h \ str.h \ str-sanitize.h \ strescape.h \ diff -r -u -N --exclude=Makefile.in --exclude=.deps --exclude=Makefile src/lib/sha2.c lib/sha2.c --- src/lib/sha2.c 1970-01-01 01:00:00.000000000 +0100 +++ lib/sha2.c 2007-02-23 14:03:46.857739818 +0100 @@ -0,0 +1,257 @@ +/* + * FIPS 180-2 SHA-224/256/384/512 implementation + * Last update: 02/02/2007 + * Issue date: 04/30/2005 + * + * Copyright (C) 2005, 2007 Olivier Gay <olivier.gay(a)a3.epfl.ch> + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the project nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +#include <string.h> + +#include "sha2.h" + +#define SHFR(x, n) (x >> n) +#define ROTR(x, n) ((x >> n) | (x << ((sizeof(x) << 3) - n))) +#define ROTL(x, n) ((x << n) | (x >> ((sizeof(x) << 3) - n))) +#define CH(x, y, z) ((x & y) ^ (~x & z)) +#define MAJ(x, y, z) ((x & y) ^ (x & z) ^ (y & z)) + +#define SHA256_F1(x) (ROTR(x, 2) ^ ROTR(x, 13) ^ ROTR(x, 22)) +#define SHA256_F2(x) (ROTR(x, 6) ^ ROTR(x, 11) ^ ROTR(x, 25)) +#define SHA256_F3(x) (ROTR(x, 7) ^ ROTR(x, 18) ^ SHFR(x, 3)) +#define SHA256_F4(x) (ROTR(x, 17) ^ ROTR(x, 19) ^ SHFR(x, 10)) + +#define UNPACK32(x, str) \ +{ \ + *((str) + 3) = (uint8) ((x) ); \ + *((str) + 2) = (uint8) ((x) >> 8); \ + *((str) + 1) = (uint8) ((x) >> 16); \ + *((str) + 0) = (uint8) ((x) >> 24); \ +} + +#define PACK32(str, x) \ +{ \ + *(x) = ((uint32) *((str) + 3) ) \ + | ((uint32) *((str) + 2) << 8) \ + | ((uint32) *((str) + 1) << 16) \ + | ((uint32) *((str) + 0) << 24); \ +} + +#define UNPACK64(x, str) \ +{ \ + *((str) + 7) = (uint8) ((x) ); \ + *((str) + 6) = (uint8) ((x) >> 8); \ + *((str) + 5) = (uint8) ((x) >> 16); \ + *((str) + 4) = (uint8) ((x) >> 24); \ + *((str) + 3) = (uint8) ((x) >> 32); \ + *((str) + 2) = (uint8) ((x) >> 40); \ + *((str) + 1) = (uint8) ((x) >> 48); \ + *((str) + 0) = (uint8) ((x) >> 56); \ +} + +#define PACK64(str, x) \ +{ \ + *(x) = ((uint64) *((str) + 7) ) \ + | ((uint64) *((str) + 6) << 8) \ + | ((uint64) *((str) + 5) << 16) \ + | ((uint64) *((str) + 4) << 24) \ + | ((uint64) *((str) + 3) << 32) \ + | ((uint64) *((str) + 2) << 40) \ + | ((uint64) *((str) + 1) << 48) \ + | ((uint64) *((str) + 0) << 56); \ +} + +/* Macros used for loops unrolling */ + +#define SHA256_SCR(i) \ +{ \ + w[i] = SHA256_F4(w[i - 2]) + w[i - 7] \ + + SHA256_F3(w[i - 15]) + w[i - 16]; \ +} + + + +uint32 sha256_h0[8] = + {0x6a09e667, 0xbb67ae85, 0x3c6ef372, 0xa54ff53a, + 0x510e527f, 0x9b05688c, 0x1f83d9ab, 0x5be0cd19}; + + +uint32 sha256_k[64] = + {0x428a2f98, 0x71374491, 0xb5c0fbcf, 0xe9b5dba5, + 0x3956c25b, 0x59f111f1, 0x923f82a4, 0xab1c5ed5, + 0xd807aa98, 0x12835b01, 0x243185be, 0x550c7dc3, + 0x72be5d74, 0x80deb1fe, 0x9bdc06a7, 0xc19bf174, + 0xe49b69c1, 0xefbe4786, 0x0fc19dc6, 0x240ca1cc, + 0x2de92c6f, 0x4a7484aa, 0x5cb0a9dc, 0x76f988da, + 0x983e5152, 0xa831c66d, 0xb00327c8, 0xbf597fc7, + 0xc6e00bf3, 0xd5a79147, 0x06ca6351, 0x14292967, + 0x27b70a85, 0x2e1b2138, 0x4d2c6dfc, 0x53380d13, + 0x650a7354, 0x766a0abb, 0x81c2c92e, 0x92722c85, + 0xa2bfe8a1, 0xa81a664b, 0xc24b8b70, 0xc76c51a3, + 0xd192e819, 0xd6990624, 0xf40e3585, 0x106aa070, + 0x19a4c116, 0x1e376c08, 0x2748774c, 0x34b0bcb5, + 0x391c0cb3, 0x4ed8aa4a, 0x5b9cca4f, 0x682e6ff3, + 0x748f82ee, 0x78a5636f, 0x84c87814, 0x8cc70208, + 0x90befffa, 0xa4506ceb, 0xbef9a3f7, 0xc67178f2}; + + +/* SHA-256 functions */ + +void sha256_transf(sha256_ctx *ctx, const unsigned char *message, + unsigned int block_nb) +{ + uint32 w[64]; + uint32 wv[8]; + uint32 t1, t2; + const unsigned char *sub_block; + int i,j; + + + for (i = 0; i < (int) block_nb; i++) { + sub_block = message + (i << 6); + + for (j = 0; j < 16; j++) { + PACK32(&sub_block[j << 2], &w[j]); + } + + for (j = 16; j < 64; j++) { + SHA256_SCR(j); + } + + for (j = 0; j < 8; j++) { + wv[j] = ctx->h[j]; + } + + for (j = 0; j < 64; j++) { + t1 = wv[7] + SHA256_F2(wv[4]) + CH(wv[4], wv[5], wv[6]) + + sha256_k[j] + w[j]; + t2 = SHA256_F1(wv[0]) + MAJ(wv[0], wv[1], wv[2]); + wv[7] = wv[6]; + wv[6] = wv[5]; + wv[5] = wv[4]; + wv[4] = wv[3] + t1; + wv[3] = wv[2]; + wv[2] = wv[1]; + wv[1] = wv[0]; + wv[0] = t1 + t2; + } + + for (j = 0; j < 8; j++) { + ctx->h[j] += wv[j]; + } + } +} + +void sha256(const unsigned char *message, unsigned int len, unsigned char *digest) +{ + sha256_ctx ctx; + + sha256_init(&ctx); + sha256_loop(&ctx, message, len); + sha256_result(&ctx, digest); +} + +void sha256_init(sha256_ctx *ctx) +{ + int i; + for (i = 0; i < 8; i++) { + ctx->h[i] = sha256_h0[i]; + } + + ctx->len = 0; + ctx->tot_len = 0; +} + +void sha256_loop(sha256_ctx *ctx, const unsigned char *message, + unsigned int len) +{ + unsigned int block_nb; + unsigned int new_len, rem_len, tmp_len; + const unsigned char *shifted_message; + + tmp_len = SHA256_BLOCK_SIZE - ctx->len; + rem_len = len < tmp_len ? len : tmp_len; + + memcpy(&ctx->block[ctx->len], message, rem_len); + + if (ctx->len + len < SHA256_BLOCK_SIZE) { + ctx->len += len; + return; + } + + new_len = len - rem_len; + block_nb = new_len / SHA256_BLOCK_SIZE; + + shifted_message = message + rem_len; + + sha256_transf(ctx, ctx->block, 1); + sha256_transf(ctx, shifted_message, block_nb); + + rem_len = new_len % SHA256_BLOCK_SIZE; + + memcpy(ctx->block, &shifted_message[block_nb << 6], + rem_len); + + ctx->len = rem_len; + ctx->tot_len += (block_nb + 1) << 6; +} + +void sha256_result(sha256_ctx *ctx, unsigned char *digest) +{ + unsigned int block_nb; + unsigned int pm_len; + unsigned int len_b; + int i; + + block_nb = (1 + ((SHA256_BLOCK_SIZE - 9) + < (ctx->len % SHA256_BLOCK_SIZE))); + + len_b = (ctx->tot_len + ctx->len) << 3; + pm_len = block_nb << 6; + + memset(ctx->block + ctx->len, 0, pm_len - ctx->len); + ctx->block[ctx->len] = 0x80; + UNPACK32(len_b, ctx->block + pm_len - 4); + + sha256_transf(ctx, ctx->block, block_nb); + + for (i = 0 ; i < 8; i++) { + UNPACK32(ctx->h[i], &digest[i << 2]); + } +} + +void sha256_get_digest(const void *data, size_t size, + unsigned char result[SHA256_RESULTLEN]) +{ + sha256_ctx ctx; + + sha256_init(&ctx); + sha256_loop(&ctx, data, size); + sha256_result(&ctx, result); +} + diff -r -u -N --exclude=Makefile.in --exclude=.deps --exclude=Makefile src/lib/sha2.h lib/sha2.h --- src/lib/sha2.h 1970-01-01 01:00:00.000000000 +0100 +++ lib/sha2.h 2007-02-23 14:22:32.952116316 +0100 @@ -0,0 +1,72 @@ +/* + * FIPS 180-2 SHA-224/256/384/512 implementation + * Last update: 02/02/2007 + * Issue date: 04/30/2005 + * + * Copyright (C) 2005, 2007 Olivier Gay <olivier.gay(a)a3.epfl.ch> + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the project nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +#ifndef SHA2_H +#define SHA2_H + +#define SHA256_RESULTLEN ( 256 / 8) + +#define SHA256_BLOCK_SIZE ( 512 / 8) + +#ifndef SHA2_TYPES +#define SHA2_TYPES +typedef unsigned char uint8; +typedef unsigned int uint32; +typedef unsigned long long uint64; +#endif + + +typedef struct { + unsigned int tot_len; + unsigned int len; + unsigned char block[2 * SHA256_BLOCK_SIZE]; + uint32 h[8]; +} sha256_ctx; + +void sha256_transf(sha256_ctx *ctx, const unsigned char *message, + unsigned int block_nb); + + +void sha256_init(sha256_ctx * ctx); +void sha256_loop(sha256_ctx *ctx, const unsigned char *message, + unsigned int len); +void sha256_result(sha256_ctx *ctx, unsigned char *digest); +void sha256(const unsigned char *message, unsigned int len, + unsigned char *digest); +void sha256_get_digest(const void *data, size_t size, + unsigned char result[SHA256_RESULTLEN]); + + + +#endif /* !SHA2_H */ +

3 2

[Dovecot] SEGV with Dovecot v1.0.0 Deliver and cmusieve v1.0.1 and vacation
by Steffen Kaiser 16 Jun '07

16 Jun '07

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, I have a small Sieve script that tries to use vacation that segfaults. The script is the one from http://wiki.dovecot.org/LDA/Sieve. When I change the email address (I changed the local part into "skai"), hence, vacation is skipped, the mail is delivered without any problem. ==== script start require ["fileinto", "vacation"]; # Move spam to spam folder if exists "X-Spam-Flag" { fileinto "spam"; # Stop here so that we do not reply on spams stop; } vacation # Reply at most once a day to a same sender :days 1 :subject "Out of office reply" # List of allowed recipient addresses from auto reply should be sent. :addresses ["ska(a)ux-2s11-9.inf.fh-bonn-rhein-sieg.de"] "I'm out of office, please contact Joan Doe instead. Best regards John Doe"; ========== END ========== Out of sieved .dovecot.sievec Sievecode version 3 4: IF (ends at 13)exists{11}X-Spam-Flag 13:JUMP 20 19: FILEINTO {4}spam 19: STOP 20: VACATION {39}ska(a)ux-2s11-9.inf.fh-bonn-rhein-sieg.de 40 SUBJ({19}Out of office reply) 60 MESG({73}I'm out of office, please contact Joan Doe instead. Best regards John Doe) DAYS(1) MIME(0) full len is: 62 ========== END gdb output: Core was generated by `/usr/local/dovecot/libexec/dovecot/deliver'. Program terminated with signal 11, Segmentation fault. #0 0xb7eef3a3 in strlen () from /lib/tls/i686/cmov/libc.so.6 (gdb) bt full #0 0xb7eef3a3 in strlen () from /lib/tls/i686/cmov/libc.so.6 No symbol table info available. #1 0xb7e2bcf3 in sieve_execute_bytecode (bc=0x80e3eb0, interp=0x80e3de8, script_context=0xbfb57800, message_context=0xbfb577c4) at script.c:398 hash = "\000\000\000\000¸Z0F\000\000\000\000¸Z0F" actions = (action_list_t *) 0x80e3850 notify_list = (notify_list_t *) 0x80e3830 actions_string = "Action(s) taken:\n", '\0' <repeats 4078 times> errmsg = 0x0 imapflags = {flag = 0x0, nflags = 0} #2 0xb7e1eb2c in cmu_sieve_run (storage=0x80d0a20, mail=0x80e03c8, script_path=0x80cbc48 "/home/ska/.dovecot.sieve", username=0x80cb030 "ska", mailbox=0x80bae92 "INBOX") at sieve-cmu.c:573 fd = <value optimized out> interp = (sieve_interp_t *) 0x80e3de8 bytecode = (sieve_bytecode_t *) 0x80e3eb0 sdata = {username = 0x80cb030 "ska", storage = 0x80d0a20, errors = 0x0} mdata = {mail = 0x80e03c8, mailbox = 0x80bae92 "INBOX", id = 0x80e4860 "<200704260754.l3Q7sWdu002894(a)ux-2s11-9.inf.fh-bonn-rhein-sieg.de>", return_path = 0x0, authuser = 0x80cb030 "ska", temp = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}} compiled_path = 0x80cbc68 "/home/ska/.dovecot.sievec" path = 0xb7fb0ff4 "<Í\022" ret = <value optimized out> #3 0xb7e1da72 in cmusieve_deliver_mail (storage=0x80d0a20, mail=0x80e03c8, username=0x80cb030 "ska", mailbox=0x80bae92 "INBOX") at cmusieve-plugin.c:72 script_path = 0x80cbc48 "/home/ska/.dovecot.sieve" #4 0x08057536 in main (argc=Cannot access memory at address 0x0 ) at deliver.c:679 tab = (struct var_expand_table *) 0x80cb068 config_path = 0x80bb79c "/usr/local/dovecot/etc/dovecot.conf" envelope_sender = 0x80bae98 "MAILER-DAEMON" mailbox = 0x80bae92 "INBOX" auth_socket = <value optimized out> home = <value optimized out> destination = 0x80cb030 "ska" user = 0x80cb030 "ska" mail_env = <value optimized out> flags = 1025 lock_method = MAIL_STORAGE_LOCK_FCNTL storage = (struct mail_storage *) 0x80d0a20 mbox_storage = (struct mail_storage *) 0x80d2d48 box = (struct mailbox *) 0x80dcc88 input = (struct istream *) 0x80d4044 t = (struct mailbox_transaction_context *) 0x80de2a0 mail = (struct mail *) 0x80e03c8 process_euid = 30000 i = 63 ret = <value optimized out> (gdb) - -- Steffen Kaiser -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) iQEVAwUBRjBdji9SORjhbDpvAQICoggAnzLxTlL8mDonntaDvwr/4JN6eWPIAm7o XP6hSw9JlbTsPY55keQMZpN/UNB/FXojcqI6lD4f/2dJqCEHmeB40NQZEMUN+f60 6+BHkE6vb2sMnXa09eQWg2d5zVKp6bHdSsbtzmWIsYX0stUFMncFTJVQgatHstDm DaSGMf6V2SwiPst/0tUbeTMqYhud9LU2YLhU3+T9AuTmcSGztohnJPGnqC1GLP+N m+KLbLF6B7ZMQ2RX+M+arzz8EQRHZ2622aqiLKoT+rVZ8LkLPzp4Whd9HK1MqMld KSjJuZBKgKuJr61SGqPboPOip635DgJH7g2BKgGnOHWvJf6E7U+Q9A== =1M3a -----END PGP SIGNATURE-----

3 3

[Dovecot] auth process(es)
by Thomas Hummel 16 Jun '07

16 Jun '07

Hello Timo, I've got some questions about dovecot-auth processes which I cannot answer just by reading the doc : [ Note : my problem is that I often see dovecot: pop3-login: Can't connect to auth server at default: Connection refused and I'm looking for a way to tweak dovecot.conf parameters to allow more login <-> auth connections ] - I'm not sure I get the auth worker process concept right : is there a master dovecot-auth which listens to new incoming connections from login processes and fork/exec the real job of authenticating against the pass/userdbs to a child, called an auth worker ? - is it safe to increment the number of auth processes (the 'count' parameter in the auth block (auth_default { ...} for instance) ? - my understanding is that login processes communicate with auth processes through a unix type socket (named 'default') : can I create a second auth block in dovecot.conf (for instance 'aut extra {...}') in addition to the existing 'auth default {...}' one ? would it create an second unix socket and thus allowing a heavier login processes load ? what would be the difference between that and, say, changing the 'count' parameter to '2' in the 'auth default' section ? thanks. -- Thomas Hummel | Institut Pasteur <hummel(a)pasteur.fr> | Pôle informatique - systèmes et réseau

2 5

[Dovecot] different configurations for individual user
by Joshua C.S. Chen 16 Jun '07

16 Jun '07

Hi everyone, I am planning to upgrade my current uw-imap to dovecot. I am using Linux (Redhat EL 4). The main purpose is to use maildir instead of mbox. For some reason, I don't want to upgrade all users' mail boxes all at a time, but I want to change the imap server first (to dovecot), while keeping all mbox files, then convert them to maildir user by user (one user at a time). My question is: Is it possible that dovecot can setup individual user's own configuration? so that some users can setup mail_location = mbox but others = maildir. Thanks in advance Joshua

2 1

[Dovecot] LDAP subtree search on AD
by Bruno Puga 16 Jun '07

16 Jun '07

Hello people! I'm new to the list and to dovecot too. In advance I'd like to thank everybody who could help me, and I'll be very glad if a could help somebody here. I'm working in a project to integrate dovecot and active directory authentication for 2 weeks without total success. I've tried so many waysto solve my problem, but no one gave me the right answer. I'll appreciate if someone could help me. First off all let me show some needed data. Distro: Debian Etch dovecot --version 1.0.0 dovecot -n # /etc/dovecot/dovecot.conf base_dir: /var/run/dovecot/ log_path: /var/log/dovecot-imapd.log log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap disable_plaintext_auth: no login_dir: /var/run/dovecot//login login_executable: /usr/lib/dovecot/imap-login mail_debug: yes imap_client_workarounds: outlook-idle delay-newmail auth default: verbose: yes debug: yes debug_passwords: yes passdb: driver: pam args: dovecot userdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf socket: type: listen client: master: path: /var/run/dovecot/auth-master mode: 384 user: vmail group: vmail /etc/dovecot/dovecot-ldap.conf hosts = 192.168.0.11 dn = cn=dovecot,cn=Users,dc=tecnicopias01,dc=com,dc=br dnpass = password ldap_version = 3 auth_bind = yes base = DC=tecnicopias01,DC=com,DC=br deref = never scope = subtree user_attrs = info=mail user_filter = (&(objectClass=organizationalPerson)(sAMAccountName=%u)) user_global_uid = 5000 user_global_gid = 5000 I can authenticate using pam+krb5 with success, but when I try to make a userdb search to get maillocation for the authenticated user, I get in trouble. The ldap_search doesn't make subtree search, making only onelevel search. So, if I point the base directive (/etc/dovecot/dovecot-ldap.conf) to where the user that is authenticating in that moment is, I can perfect login and get the maillocation. My question is: Why dovecot doesn't make ldap subtree search? Or, am I missing anything? Thanks Bruno.

2 5

[Dovecot] Looking for plugin docs
by Rajkumar S 16 Jun '07

16 Jun '07

Hello all, I had gone through the wiki, but could not find any page about writing new plugins. Any pointers towards plugin api/docs will be very helpful. with warm regards, raj

3 14

Re: [Dovecot] auth process(es)
by Kenny Dail 15 Jun '07

15 Jun '07

> > - is it safe to increment the number of auth processes (the 'count' > > parameter in the auth block (auth_default { ...} for instance) ? > > Should be. > > > - my understanding is that login processes communicate with auth > > processes through a unix type socket (named 'default') : > > > > can I create a second auth block in dovecot.conf (for instance > > 'aut extra {...}') in addition to the existing 'auth default {...}' > > one ? would it create an second unix socket and thus allowing a heavier > > login processes load ? > > > > what would be the difference between that and, say, changing the > > 'count' parameter to '2' in the 'auth default' section ? > > Increasing count allows heavier load, because there are then more > processes listening for incoming connections in the same socket. Actually increasing the count doesn't work. At least not for me on 1.0.0: Jun 14 12:28:39 mail5 dovecot: Dovecot v1.0.0 starting up Jun 14 12:28:39 mail5 dovecot: Auth process died too early - shutting down Jun 14 12:28:39 mail5 dovecot: child 19080 (auth) returned error 89 Jun 14 12:28:39 mail5 dovecot: auth(default): Socket already exists: /var/run/dovecot/auth-client -- Kenny Dail <kend(a)amigo.net>

3 2

[Dovecot] shared folders
by T. Horsnell 14 Jun '07

14 Jun '07

A number of our users would greatly benefit from truly shareable mail folders. I know we can bodge this with symlinks, but mailbox corruptions seem to occur when simultaneous updates are made, but this may be a client issue I guess. So I wonder if true shareability is creeping up the agenda. By true shareability, I mean such that if two users have the same folder open and one of them makes a modification to it, the display of that folder on the other user's screen immediately reflects that change. I guess this may well require a co-operating client... Cheers, Terry --

2 1

[Dovecot] postfix+dovecot delivering to wrong (/var/mail/%u) place
by Tom Lobato 14 Jun '07

14 Jun '07

(Dovecot 1.0.rc15) Hello I'm tring to configure postfix+dovecot on debian etch. In dovecot I use passdb pam and userdb passwd-file. I can connect pop3 clients and reveice mails and connect smtp clients and send mails, but it is delivered to /var/mail/%u instead the configured mailboxes in /var/local/dovecot/%u. I`ve configured postfix as say http://wiki.dovecot.org/LDA/Postfix. /etc/postfix/main.cf: ----------------------------------- smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) biff = no append_dot_mydomain = no myhostname = coan alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases mydestination = coan.com.br myorigin = /etc/mailname relayhost = mynetworks = 121.120.0.0/16 mailbox_size_limit = 0 inet_interfaces = all smtpd_recipient_restrictions = reject_unauth_destination virtual_transport = dovecot dovecot_destination_recipient_limit = 1 ----------------------------------- belong master.cf. Below the syslog when I send mail via smtp... /var/log/syslog: -------------------------------- postfix/smtpd[16656]: connect from 201-95-99-135.dsl.telesp.net.br[201.95.99.135] postfix/smtpd[16656]: C76F948E3D7: client=201-95-99-135.dsl.telesp.net.br[201.95.99.135] postfix/cleanup[16660]: C76F948E3D7: message-id=<1181769218.7844.6.camel@mobile> postfix/qmgr[16653]: C76F948E3D7: from=<tom(a)coan.com.br>, size=457, nrcpt=1 (queue active) postfix/local[16661]: C76F948E3D7: to=<tom(a)coan.com.br>, relay=local, delay=0.52, delays=0.45/0.01/0/0.07, dsn=2.0.0, status=sent (delivered to mailbox) postfix/qmgr[16653]: C76F948E3D7: removed postfix/smtpd[16656]: disconnect from 201-95-99-135.dsl.telesp.net.br[201.95.99.135] ------------------------------- If I change 'virtual_transport = dovecot' to 'local_transport = dovecot', syslog output changes relay-local to relay=dovecot, but bounces the mail saying 'passwd-file(tom(a)coan.com.br): unknown user'. However I'm sure that the user is in the passwd-file and dovecot has permissions to read it. Can you give some hints about what can be happening? Dovecot conf: ----------------------- # /etc/dovecot/dovecot.conf log_timestamp: %Y-%m-%d %H:%M:%S protocols: pop3 disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/pop3-login mail_extra_groups: mail mailboxes mail_location: maildir:/var/local/dovecot/%u mail_executable: /usr/lib/dovecot/pop3 mail_plugin_dir: /usr/lib/dovecot/modules/pop3 pop3_uidl_format: %v.%u auth default: verbose: yes debug: yes debug_passwords: yes passdb: driver: pam userdb: driver: passwd-file args: /etc/mailsystem/userdb socket: type: listen client: master: path: /var/run/dovecot/auth-master mode: 438 ----------------------- Thank you Tom Lobato

1 1

[Dovecot] How do I test new code?
by Stewart Dean 14 Jun '07

14 Jun '07

I know how to run a second instance of the *base* code (to check different functionality/config) and documented it in http://wiki.dovecot.org/RunningDovecot What I realize I don't know how to do is to run an altogether different version or build of the code as that second instance, which would be good to have to check out upgrades before they go into production. While I could do a build in the regular fashion and put DC somewhere else or name it something else, so I could invoke this different code, presumably that different code will still look for the subsidiary executables in the usual place. Do I have to change the DESTDIR parm when doing the make install or some such? I do realize that, just as I did with running a second instance of the *same* code, I'd have to change the config file, have a separate /var/run directory...... -- ==== Stewart Dean, Unix System Admin, Henderson Computer Resources Center of Bard College, Annandale-on-Hudson, New York 12504 sdean(a)bard.edu voice: 845-758-7475, fax: 845-758-7035

2 1

[Dovecot] errors in dovecot-uidlist
by Erland Nylend 14 Jun '07

14 Jun '07

We have migrated a mailsystem to postfix/dovecot, using the courier migrate script, and we have run into a problem with dovecot-uidlist. The messages are not listed in the correct order .. This is an example dovecot-uidlist -file: 1 1177585200 49 22 1179084774.P7191Q0M321163.webmail1,S=8245:2,S 24 1179377823.P15932Q0M835219.smtp1,S=3462:2,S 25 1179668346.P23942Q0M941365.webmail1,S=4820357:2,S 31 1179864561.P22903Q0M433768.smtp2,S=3306:2,S 34 1180344355.P25491Q0M17232.smtp2,S=5111:2,S 35 1180454170.P14932Q0M841649.smtp2,S=2024:2, 36 1168867750.H82058P20971.smtp1:2,SR 37 1170339716.H537368P4032.smtp1:2,S 38 1171291025.H352867P8785.smtp2:2,SR 39 1171357049.H141820P2105.smtp1:2,SR 40 1171460195.H933928P14324.smtp1:2,SR 41 1171616121.H812220P27503.smtp2:2,SR 42 1171872919.H950768P16201.smtp1:2,S 43 1173694618.H330094P23347.smtp1:2,S 44 1175238705.H589518P693.smtp1:2,SR 45 1176800600.H716261P10514.smtp1:2,SR 46 1177615732.H355340P10418.webmail1:2,SR 47 1180471524.P30985Q0M109430.smtp2,S=16621 48 1180597849.P8169Q0M990486.smtp1,S=33326 As you can see, the unix timestamps are descending between uid 35 and uid 36 .. and this causes problems if we intend to make webmail access the messages through imap. (it expects to receive the messages sorted by when they were received) Is there any way I can sort the list accourding to the unix timestamps, and still make it transparent to the pop3/imap clients? I would prefer a solution that does not involve users downloading allready downloaded messages via pop3. -- Erland Nylend

2 3

[Dovecot] 1.0.1 release candidate 3
by Timo Sirainen 14 Jun '07

14 Jun '07

http://dovecot.org/tmp/dovecot-1.0.1rc3.tar.gz Looks like I managed to do a lot of changes today. So I'll wait a few more days before v1.0.1 release. The important changes since rc2: + deliver: Added -e parameter to write rejection error to stderr and exit with EX_NOPERM instead of sending the rejection by executing sendmail. + dovecot --log-error logs now a warning, an error and a fatal - APPEND / SEARCH: If internaldate was outside valid value for time_t, we returned BAD error for APPEND and SEARCH never matched. With 64bit systems this shouldn't have happened. With 32bit systems the valid range is usually for years 1902..2037. See ChangeLog for more.

8 9

[Dovecot] Updating Folders in Mail box
by Wade Smart 13 Jun '07

13 Jun '07

Im looking on the dovecot documentation about how to update the folder structure. I had some computer problems so I back up my mail and when I reinstalled I got rid of a bunch of unused old mail. But now when I open my mail client it still things all of those folders are still there. Im looking for how to update the file on what is and isnt there. wade

5 5

[Dovecot] Domain part / auth_username_format
by Robert Coup 13 Jun '07

13 Jun '07

Hey folks, I want to authenticate a pop3 user without a domain part and then use the domain part to specify a Maildir subfolder to grab messages from. So, this was my attempt: # use the domain part to access a subfolder mail_location = maildir:/mail/%n/Maildir/%d # strip of the domain part for authentication purposes auth_username_format = %n login: testuser@.INBOX.SubFolder Authentication of testuser works great, but mail_debug shows me that the domain-part (%d) is empty when expanding mail_location. Any bright ideas? Rob :) [ Dovecot 1.0.rc15, Debian Sarge, PAM auth. ]

2 2

[Dovecot] No auto-conversion of .customflags?
by Christian Balzer 13 Jun '07

13 Jun '07

Hello, I'm in the process of migrating 0.99 dovecot maildir boxes to a pair of new machine. These servers were running the stable (etch) 1.0rc15 package of dovecot until yesterday and existing .customflags files were correctly converted to dovecot-keywords. Yesterday I upgraded to the (finally, thanks to who did this) 1.0.0 etch backports package and since then freshly migrated boxes get this error: --- Jun 12 09:48:06 mb11 dovecot: IMAP(username): stat(/longandboringpath/username/.customflags/cur) failed: Not a directory --- Firstly, I thought Linux was one of the OS' that had a free dir stat, but I guess I could have just hallucinated that. But more importantly, obviously .customflags does NOT get converted anymore and thus shows up in IMAP LIST commands. Since I doubt that the backport people did change anything in the code I suppose that this is a genuine 1.0.0 problem which probably should be addressed for the upcoming 1.0.1 release. Regards, Christian -- Christian Balzer Network/Systems Engineer NOC chibi(a)gol.com Global OnLine Japan/Fusion Network Services http://www.gol.com/

2 3