- dovecot - dovecot.org

Re: [Dovecot] Can I install in the following fashion?
by Stewart Dean 07 Mar '06

07 Mar '06

if you run configure --help, you will see this (and more): > Installation directories: > --prefix=PREFIX install architecture-independent files in PREFIX > [/usr/local] > --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX > [PREFIX] > > By default, `make install' will install all the files in > `/usr/local/bin', `/usr/local/lib' etc. You can specify > an installation prefix other than `/usr/local' using `--prefix', > for instance `--prefix=$HOME'. > > For better control, use the options below. > > Fine tuning of the installation directories: > --bindir=DIR user executables [EPREFIX/bin] > --sbindir=DIR system admin executables [EPREFIX/sbin] > --libexecdir=DIR program executables [EPREFIX/libexec] > --datadir=DIR read-only architecture-independent data [PREFIX/share] > --sysconfdir=DIR read-only single-machine data [PREFIX/etc] > --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] > --localstatedir=DIR modifiable single-machine data [PREFIX/var] > --libdir=DIR object code libraries [EPREFIX/lib] > --includedir=DIR C header files [PREFIX/include] > --oldincludedir=DIR C header files for non-gcc [/usr/include] > --infodir=DIR info documentation [PREFIX/info] > --mandir=DIR man documentation [PREFIX/man] I see now I missed something so I will redefine my request. If I invoke configure with: --prefix=/usr/local/dovecot-bld/<timestamp> --eprefix=/usr/local/dovecot-bld/<timestamp> where /usr/local/dovecot-bld/<timestamp> is a directory Q1: Will I have everything in that one directory so that by tar'ing and untar'ing that one directory I can tar up everything necessary to run dovecot on another machine with the same OSlevel/patches/OpenSSL. Will dovecot be able to reference everything it needs? I notice that --oldincludedir=DIR C header files for non-gcc [/usr/include] will not be there. Will that be a problem? Q2: Will dovecot not be able to find system resources it needs? Tar'ing up a directory is doable. RPM'ing hundreds of files scattered here and there, perhaps referenced by others, perhaps with new additions/deletions you don't know about sounds like an heroic task. Does anybody see how simple it is to upgrade UWImap with its one binary? Lior Okman wrote: > Looking at the debianized version, the bulk of the files are placed in > € > or under /usr/lib/dovecot, with all of the configuration files in > € > /etc/dovecot, and relevant binaries under /usr/bin and /usr/sbin. > € > > € > However, reading from the comment in the begining of the default > € > dovecot.conf file, you can probably compile your own version of > € > dovecot where you specify the following parameters to configure: > € > "--prefix=/usr --sysconfdir=/etc --localstatedir=/var > € > --with-ssldir=/etc/ssl". > € > Just make sure to replace all the paths with where you want to install > € > this version of dovecot. > € > > € > Lior > € > > € > On 3/7/06, Stewart Dean <sdean(a)bard.edu> wrote: > € > >> Hmmm, hadn't thought of RPM. But I would like a direct answer to my >> > € > >> question, which was: Can I just tar up everything in a dovecot-only >> > € > >> prefix directory (defined in the invocation of configure) when the make >> > € > >> and make install is done, and then untar/extract it in a directory of >> > € > >> the same name over on another machine with the same OS, patches and >> > € > >> OpenSSL? Are there Dovecot dependencies outside prefix directory. >> > € > > € > >> My OS is AIXV5.3 maintenance/tech level 4. There is no distro RPMs for >> > € > >> same, so I am building it myself. >> > € > > € > >> Lior wrote: >> > € > >>> The problem you are describing is solved with tools like RPM and DEB. >>> > € > > € > >>> You can install/remove an entire package with a single command, you >>> > € > >>> can verify the installation with a single command, you can safetly >>> > € > >>> upgrade with a single command, and safetly revert to an older version >>> > € > >>> with a single command. >>> > € > > € > >>> These tools allow you to find out exactly which file belongs to what >>> > € > >>> package, and they prevent conflicting files from two different >>> > € > >>> packages from being installed. Not to mention (almost) automatic (at >>> > € > >>> least on debian) dependency resolving for packages. >>> > € > > € > >>> If you're using Debian, you can just "apt-get install dovecot-imap >>> > € > >>> dovecot-pop", and have the dpkg handle all of the issues you >>> > € > >>> mentioned. If you're using an RPM based distro- try yum or apt-rpm. >>> > € > > € > >>> Lior >>> > € > > € > > € > >> Timothy White wrote: >> > € > >>>> If you're using Debian, you can just "apt-get install dovecot-imap >>>> > € > >>>> dovecot-pop", and have the dpkg handle all of the issues you >>>> > € > >>>> mentioned. If you're using an RPM based distro- try yum or apt-rpm. >>>> > € > > € > > € > >>> And there is nothing stopping you making a deb package, from a newer >>> > € > >>> version of dovecot, that Debian has, AND, duplicating the server, so >>> > € > >>> you can do a test upgrade... Of course, with any upgrade, someone will >>> > € > >>> notice something ;-) >>> > € > > € > >>> Tim >>> > € > >>> -- >>> > € > >>> Linux Counter user #273956 >>> > € > > € > > € > >> -- >> > € > >> ==== >> > € > >> Stewart Dean, Unix System Admin, Henderson Computer Resources >> > € > >> Center of Bard College, Annandale-on-Hudson, New York 12504 >> > € > >> sdean(a)bard.edu voice: 845-758-7475, fax: 845-758-7035 >> > € > > € > > € > -- ==== Stewart Dean, Unix System Admin, Henderson Computer Resources Center of Bard College, Annandale-on-Hudson, New York 12504 sdean(a)bard.edu voice: 845-758-7475, fax: 845-758-7035

1 0

[Dovecot] dspam plugin mailing list?
by Johannes Berg 07 Mar '06

07 Mar '06

Hi, Every once a while I get mail about my dspam plugin. While that's great (tells me people are using it or at least like the idea), sometimes I think the discussions then should be accessible to others. I'm thinking of setting up a new mailing list for it so answers get archived, are searchable, and I don't necessarily have to reply to everything. I'm not sure if that's feasible though, there probably aren't *that* many users, and sometimes the questions are more dovecot questions. Would anyone on this list (esp. Timo of course) mind if I were to note on the plugin page that discussion and questions should be sent to this (the dovecot) mailing list? I'll still be reading here and answering questions, of course, but then if something crops up that's more dovecot than plugin related it's at the right place already, or if I'm off for a few days and someone else knows the answer... If there are any objections I'll just set up a private mailing list instead and ask anyone interested to join (it'd be very low volume I guess) :) johannes

2 2

[Dovecot] mbox sync: UID inserted in the middle of mailbox...
by Simon Bowden 07 Mar '06

07 Mar '06

Hi, We're getting a lot of errors like this: Mar 7 10:02:35 imapserver dovecot: imap(user1): mbox sync: UID inserted in the middle of mailbox /home/user1/mail/mail/INBOX.Trash (8 > 2, seq=2,idx_msgs=6) We have several hundred people using the server, and at least 22 have had this error in the past 24 hours. The numbers at the end change between each user, which I guess you'd expect. I was able to make the errors go away for one user by removing the index files (rm -rf ~/mail/.imap/INBOX), so I'm guessing they were corrupt. However, the problem with this is that: 1) It requires user intervention 2) The symptom is that they aren't seeing any new mail in the affected mailbox. I had thought that the indexing stuff would not *give up*, but would reindex a directory if there was a problem. Anyone able to help? Some info on our setup: /home/user is nfs-mounted. We allow them to configure their mbox/maildir type and location, but obviously this is only relating to mbox ones. Here's the config file, stripped of comments and blank lines: ==================== protocols = imap imaps ssl_cert_file = /etc/ssl/certs/imapd.cert ssl_key_file = /etc/ssl/private/imapd.pem ssl_ca_file = /etc/ssl/certs/cacert.pem log_timestamp = "%Y-%m-%d %H:%M:%S " login_processes_count = 6 first_valid_uid = 40 mail_extra_groups = default_mail_env = mbox:~/mail/:INBOX=~/.incoming-mail mmap_disable = yes mail_drop_priv_before_exec = yes protocol imap { mail_executable = /usr/local/mail/imap-wrapper imap_client_workarounds = outlook-idle delay-newmail tb-extra-mailbox-sep } protocol pop3 { } auth default { mechanisms = plain gssapi passdb pam { args = session=yes * } userdb passwd { } user = root } plugin { } ==================== /usr/local/mail/imap-wrapper is just a script that lets them configure the setup a bit (effectively change value of MAIL, and some namespace stuff), ultimately running /usr/lib/dovecot/imap. The nfs mount options on the home directory mount are: rw,hard,intr,rsize=8192,wsize=8192,nosuid,nodev,vers=3,proto=udp Thanks! Cheers, - Simon

2 1

[Dovecot] Dovecot as a smart IMAP proxy
by Timo Sirainen 07 Mar '06

07 Mar '06

Do you see a use for an IMAP proxy where the proxy would be able to execute hooks which modify mail contents, such as transparent encrypting/decrypting mails, or maybe some virus-filtering? It would need at least some kind of IMAP command/reply parsing capabilities, so it might be able to do all kinds of other things. Maybe one potential use case would be Cyrus Murder-like proxying to multiple IMAP servers to distribute the mailboxes. But that might be done better as an imap process plugin, or maybe as IMAP mail storage backend. Anyway, the reason I'm asking this is because I was asked to add mail encryption/decryption capabilities to Dovecot's IMAP proxy, but I'm not sure what would be the best way to handle this. In any case it would be a plugin or a new binary which is executed instead of imap binary, but can I do it in a way that would actually be useful for Dovecot project in general?

8 14

[Dovecot] [IMAP] Strange! No problem when I import mails from local to server.
by Xueron Nee 07 Mar '06

07 Mar '06

Hi, All: I hava just post a question that says when I move mail from one folder to another, mails were holded in the tmp directory of the target folder. I try to move mails from server to local and then, move them from the local folder to the server side folder, it works fine :) I refresh the tmp directory and could see tmp files created-unlinked, and all mail imported to the target folder currectly. What's the problem when I move mails between server-side folders? -- Xueron Nee <xueron(a)gmail.com>

1 0

[Dovecot] [IMAP] mails holded in tmp directory
by Xueron Nee 07 Mar '06

07 Mar '06

Version: 1.0.beta3 OS: Redhat AS 4 I use the cvs version of Dovecot to run my IMAP server. When I move some mails from one folder to another, only 1 or 2 mails are moved, while others were holded in the tmp directory of the target folder. So, what's the matter? I use becky and Outlook as client, and both of the two have the same problem. Thanks :) -- Xueron Nee <xueron(a)gmail.com>

1 0

[Dovecot] Shared Folders (1.0beta3)
by Timothy White 07 Mar '06

07 Mar '06

A few quick questions, as documentation seems to be sparse. * Is there a way to force a shared folder to be subscribed to? If I am using SquirrelMail I have a plugin to do that, but not if they are using another IMAP client. * Are there some sort of ACL's on shared folders, so that I can (hopefully with a sql backend), allow different users different permissions on the folder? * Is it a bug that we can't subscribe to the shared folder, only to it's sub folders? (and is there a way to work around this, i.e. if the shared folder isn't really a Maildir, but it's sub folders are? Other than that, so far, my glimpse at 1.0beta3 is looking very good, and came at the right time, as I was thinking I might need to use Cyrus for the project I'm working on atm... Thanks Tim -- Linux Counter user #273956

2 2

RE: [Dovecot] getting lock error
by Bas van den Dikkenberg 07 Mar '06

07 Mar '06

Thanx fot the tip this solves problem with pop3 but not with imap With imap I get imap(basweb(a)dikkenberg.net): Mar 07 00:32:35 Error:mailstore/vmail/dikkenberg.net/basweb/.subscriptions failed with subscription file file_wait_lock(): No locks available I'm running redhat enterprise linux 4.0 with dovecot 0.99.11 but redhat doesn't provide the new version yet with up2date is there an rpm so I can update? Met vriendelijk groet, Bas van Dikkenberg GISkit bv BFVD1-RIPE Tel: +3130-6340430 Fax: +3130-6342433 Prive Tel: +3130-6372769 Mob: +316-52384841 -----Oorspronkelijk bericht----- Van: dovecot-bounces(a)dovecot.org [mailto:dovecot-bounces@dovecot.org] Namens Timo Sirainen Verzonden: maandag 6 maart 2006 21:55 Aan: Bas van den Dikkenberg CC: dovecot(a)dovecot.org Onderwerp: Re: [Dovecot] getting lock error On Mon, 2006-03-06 at 09:11 +0100, Bas van den Dikkenberg wrote: > I’m getting this error for al my users does anybody know wat the > problem is and how i can fix it > > pop3(bas(a)giskit.nl): Mar 06 09:10:37 Error: file_wait_lock() failed > with index file /mailstore/vmail/giskit.nl/bas/.INBOX/.imap.index: No > locks available First of all, use 1.0betas instead of 0.99.x. Then read NFS section in http://wiki.dovecot.org/QuickConfiguration

1 0

[Dovecot] using mbox but, can't create subfolders
by blaq b0x 06 Mar '06

06 Mar '06

Hi, I'm using mbox format w/ dovecot 1.0b3. I tried moving over my mail from a uw-imap server. Everything works fine except I can't create subfolders. Is there something I'm doing wrong or is this a limitation of dovecot? How can I fix this? Thanks, --------------------------------- Yahoo! Mail Bring photos to life! New PhotoMail makes sharing a breeze.

2 3

Re: [Dovecot] maildir locking and 'racing'
by William Ross 06 Mar '06

06 Mar '06

On 2 Mar 2006, at 21:44, Andy Cravens wrote: > I had this problem on a Sun Solaris 9 host using maildir. I had to > set lock_method = fcntl in dovecot.conf > > All accounts on this system are on local disk (not NFS) Fantastic! Fixed it just like that. Thank you. Oddly, this too is a Sun box but it's running Debian. I'm ccing this back to the list in case anyone else needs to know that (or can tell me what's wrong with my flock). thanks again, will > > > > > > > William Ross wrote: > >> hello Timo, list, >> >> quick error-message question. A few of the accounts on my main >> mailserver are failing to log in with errors like this: >> >> dovecot: Mar 02 19:33:35 Error: imap(user(a)example.com): >> maildir_file_do(/var/lib/vpopmail/domains/example.com/user/ >> Maildir) racing >> >> if I log in by telnet everything is fine, and from the source it >> looks like the error happens when dovecot fails to get a lock on >> some important file or other. Could it be to do with concurrent >> connections? No idea. Has anyone seen this, and can you suggest a >> quick fix? I can't see any obvious difference between the >> accounts that work and those that don't :( >> >> nb. this is with vpopmail, and the Maildirs have just been moved >> over from another server that was also running the same version >> of dovecot. Some of the accounts do work. Perhaps it's just an >> obscure file permissions problem, or something? I'd be very glad >> of any suggestions. >> >> thank you, >> >> will >> > >

2 1

[Dovecot] permission/ownership of SSL cert, key & their directories
by Stewart Dean 06 Mar '06

06 Mar '06

This ought to be a simple question. Have I got this right? drwxr-xr-x 2 root system 512 Mar 03 15:16 certs drwxr-x--- 2 root system 512 Mar 03 15:10 private ./certs: -rw-r--r-- 1 root system 1403 Mar 03 15:16 dovecot.pem ./private: -rw------- 1 root system 887 Mar 03 15:16 dovecot.pem -- ==== Stewart Dean, Unix System Admin, Henderson Computer Resources Center of Bard College, Annandale-on-Hudson, New York 12504 sdean(a)bard.edu voice: 845-758-7475, fax: 845-758-7035

2 1

[Dovecot] getting lock error
by Bas van den Dikkenberg 06 Mar '06

06 Mar '06

I'm getting this error for al my users does anybody know wat the problem is and how i can fix it pop3(bas(a)giskit.nl): Mar 06 09:10:37 Error: file_wait_lock() failed with index file /mailstore/vmail/giskit.nl/bas/.INBOX/.imap.index: No locks available Met vriendelijk groet, Bas van Dikkenberg GISkit bv BFVD1-RIPE Tel: +3130-6340430 Fax: +3130-6342433 Prive Tel: +3130-6372769 Mob: +316-52384841

2 1

[Dovecot] convert tool
by lenny＠edpausa.com 06 Mar '06

06 Mar '06

Trying out the new convert tool, to migrate from mbox to maildir. Using this syntax ( both inbox and folders are in user's home dir, in mbox format ) ./convert-tool pinetest/export/home2/pinetest \ mbox:/export/home2/pinetest/:INBOX=/export/home2/pinetest/mbox \ maildir:/export/home2/pinetest/Maildir/ I get this error. "Error: Mailbox conversion: Couldn't create mailbox home/Trash Error: Internal failure" Where does it get home/Trash from is hard to guess. I'm not using any variables, every path explicitly says "/export/home2/pinetest" Any ideas ?

2 2

[Dovecot] How to create .dovecot.sieve through IMAP?
by Sergey A. Lipnevich 06 Mar '06

06 Mar '06

Hi All, I suspect that the answer is "no way," but there's hope. I'm trying to set up a PHP application Ingo (part of Horde suite) to create the file <home>/.dovecot.sieve for the "advanced" LDA to do mail sorting. Because PHP is running under a Web server user, Ingo can't really write this file directly. My question is, is there any way for Ingo (or any other tool, for that matter) to create that file via IMAP protocol interaction? Horde authenticates users and "knows" login/password combination (that's how it accesses mail folders). Thank you! Sergey.

2 1

[Dovecot] using uid in ldap to send email with postfix to dovecot-users!!
by hotten 06 Mar '06

06 Mar '06

Hallo @All I want to use the uid entry in an ldap-database to send email to virtuell dovecot users. What have I to to in postfix?? Allways get an error message user does not exist!! Can abybody help with an example?? Thanks a lot

2 1

[Dovecot] Does it work with ispman
by Dennis K 06 Mar '06

06 Mar '06

Hello guys, I have just installed ispman. According to the manual it supports cyrus & courier. I was wondering if it will support dovecot. Dennis Kaplan

1 0

RE: [Dovecot] Really dumb question
by Al Blake 05 Mar '06

05 Mar '06

Thanks Reuben......I got there just as your reply came in......for some reason I didn’t find them before. Found them all as hidden directories under Maildir. Now I can switch off my windows mail server :) Al. -----Original Message----- From: Reuben Farrelly [mailto:reuben-dovecot@reub.net] Sent: Sunday, 5 March 2006 9:31 PM To: Al Blake Cc: dovecot(a)dovecot.org Subject: Re: [Dovecot] Really dumb question On 5/03/2006 11:25 p.m., Al Blake wrote: > Just got dovecot running inside MEPIS 3.3.2 SOHO (debian). I am > impressed. It works really well and I am planning to move my mail away > from my Win server and access the mail from dovecot using imap. I have > copied some folders from my existing Outlook mail system into the imap > mail server without any problems....so here is the dumb question: > where are the mail files/folders stored on the MEPIS server? I have > been all over the file system and cant find any files that look right. > The dovecot doco talks about mail location for the index files - but I > have looked in all of those and cant find anything. > The MEPIS system has a Maildir for the user......but that looks just > as it did at install: contains three folders, cur, new and tmp all of > which are empty :( Do you see anything if you run: ls -la Maildir/ in the users directories? That's where the indexes are often stored.. reuben -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.375 / Virus Database: 268.1.2/274 - Release Date: 3/03/2006 -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.375 / Virus Database: 268.1.2/274 - Release Date: 3/03/2006

1 0

[Dovecot] Really dumb question
by Al Blake 05 Mar '06

05 Mar '06

Just got dovecot running inside MEPIS 3.3.2 SOHO (debian). I am impressed. It works really well and I am planning to move my mail away from my Win server and access the mail from dovecot using imap. I have copied some folders from my existing Outlook mail system into the imap mail server without any problems....so here is the dumb question: where are the mail files/folders stored on the MEPIS server? I have been all over the file system and cant find any files that look right. The dovecot doco talks about mail location for the index files - but I have looked in all of those and cant find anything. The MEPIS system has a Maildir for the user......but that looks just as it did at install: contains three folders, cur, new and tmp all of which are empty :( Please dont flame - I have looked and I did try to find the answer but I although I can see the folders and messages through the imap client I cant actually find anything on the server.......and I would like to see something before I turn my Win mail server off. Thanks Al Blake (australia) -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.375 / Virus Database: 268.1.2/274 - Release Date: 3/03/2006

2 1

[Dovecot] Apple Mail cannot connect (1.0 beta3)
by Gregory K. Ruiz-Ade 03 Mar '06

03 Mar '06

I'm testing 1.0 beta3 on our mail server, and finding that Apple Mail seems unable to connect to it. I'm running the 1.0b3 on port 997 so we can test it in parallel to 0.91 to compare performance (so far, it's hella faster). I've ensured that the users testing are _not_ connecting in any way to the 0.91 version running on port 993. From the OS X client side (10.4.5 + latest patches), Apple Mail simply sits there and spins, and eventually times out. The error it gives is: ----- Alert There may be a problem with the mail server or network. Check the settings for account "UCSD" or try again. The server error encountered was: The connection to the server "csefast.ucsd.edu" on port 0 timed out. ----- I'm thinking, "port 0, WTF?" ... On the server, I get this out of the logs: ----- Mar 2 11:54:48 csefast dovecot: imap-login: Disconnected: Inactivity: rip=<client_ip_address>, lip=<server_ip_address>, TLS Mar 2 11:54:48 csefast dovecot: imap-login: SSL_accept() syscall failed: EOF [<client_ip_address>] ----- Apple Mail is configured to connect to port 997 and has "Use SSL" checked. I'm not getting anything else useful out of the Mac in terms of debugging info. Thunderbird seems to be working fine (all platforms). The configuration file in use is: ----- protocols = imaps ssl_cert_file = /usr/share/ssl/certs/<servername>_cert.pem ssl_key_file = /usr/share/ssl/private/<servername>_key.pem login_greeting = Dovecot ready. max_mail_processes = 2048 verbose_proctitle = yes verbose_ssl = yes first_valid_uid = 100 mail_debug = yes default_mail_env = mbox:~/:INBOX=/var/mail/%u mail_full_filesystem_access = yes mbox_write_locks = dotlock fcntl mbox_very_dirty_syncs = no protocol imap { ssl_listen = *:997 login_greeting_capability = yes } protocol pop3 { } auth_verbose = yes auth_debug = yes auth default { mechanisms = plain passdb pam { args = session=yes dovecot } userdb passwd { } user = root } ----- Any ideas? Thanks, Gregory -- Gregory K. Ruiz-Ade Sr. Systems Administrator Computer Science and Engineering University of California, San Diego Office: EBU3b 1216 Phone: (858) 822-2625 E-mail: gkra(a)ucsd.edu

1 1

[Dovecot] Thunderbird 1.5 and dovecot 1.0 beta 3 problem
by Peterg 03 Mar '06

03 Mar '06

My mailhosting provider has been testing dovecot 1.0 beta 3 as a proxy server and they asked the customers if they would like to test it out and report any issues. I am using Thunderbird 1.5 (IMAP) and have been with this mailhosting company for two months and have no issues at all with their current setup which uses Perdition as their proxy servers. The problem(s) I am encountered have been reported here a few times previously over the last couple of years but in searching I have not found any concrete solutions. When I first tested it out there was a continuous problem of a failure in saving a copy of an email to the sent folder although the message was sent. One of the staff of the mailhosting company noted this exact problem as well and believed the issue was Dovecot announcing different IMAP capabilities than the real backend IMAP servers (via the CAPABILITY command). This was supposedly fixed and initially there were no issues with the first set of test emails. However, in short order, this problem re-emerged and there would be sporadic failures to copy a message to the sent folder. Another issue would be that every now and then, when clicking on a folder in the left-hand pane (and no other activity going on with Thunderbird like downloading a new mail) Thunderbird would hourglass for 10-15 seconds as if it were trying to open a connection and was having difficulty. The maximum number of connections setup in Thunderbird is the default 5 and I am advised that this is the correct setting with their servers. Reducing the maximum number of connections does not appear to change matters in terms of avoiding these problems. Changing back to the current system (ie not using the test proxy server) both these issues disappeared. I have been in communication with the mailhosting provider as to my findings but it would be most appreciated if others here would perhaps have some insight into this matter. Peter

5 10

[Dovecot] lock files on mbox using 1.0 stable
by Obantec Support 03 Mar '06

03 Mar '06

Hi i am using dovecot 1.0 stable no SSL on FC3 and mbox format i have a user who seem prone to file locks. he had a pop3 process running for 8 hours. i killed it and deleted the lock but it returned a few hour later. the user is using Outlook express only. as a test i have setup a new account for him but would like to know if there is a way to stop this happening. i have gone thru the conf and default_mail_env = mbox:/var/spool/mail/%u #lock_method = fcntl #mbox_read_locks = fcntl #mbox_write_locks = dotlock fcntl #mbox_read_locks = fcntl mbox_dotlock_change_timeout = 30 Mark -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.1.375 / Virus Database: 268.1.1/273 - Release Date: 02/03/2006

1 0

Re: [Dovecot] Error "make install" of dovecot 1.0b3 - Working !
by David A. Lee 03 Mar '06

03 Mar '06

----- Original Message ----- From: "David A. Lee" <dlee(a)calldei.com> To: "Timo Sirainen" <tss(a)iki.fi>; <dovecot(a)dovecot.org> Sent: Tuesday, February 28, 2006 4:20 AM Subject: Re: [Dovecot] Error "make install" of dovecot 1.0b3 - Working ! > 4) -- that was prety obvious, the log file told me what was going on. Its > also somehwat documented. > However 3) was a total mystery to me. All the debug log said even with > full debugging was "Authentication Failed" > > I had never used pam before (even after 25 years of unix programming ... ) > and had absolutely no clue what to do. > After looking through the source code for about an hour I found the > function call it was using (pam_authenticate) and then about another hour > looking through the worthless pam man pages and trying about a dozen > things I finally guessed right and it worked. > > I think a comment in the config or install notes would really really help > out a beginner. > > > > On Mon, 2006-02-27 at 22:08 -0500, David A. Lee wrote: >> 3) I had to create a "dovecot" service in my /etc/pam.d/ directory >> >> 4) had to add "mail" as an extra group to get write access to /var/mail > .. >> Who would I send these notes to hopefully get these issues either fixed >> or >> documented ? > > I don't know how I could anything about these. They're both > site-specific settings, not everyone wants them. I could add a reminder > about /etc/pam.d/dovecot to config file I suppose.. > >

1 0

[Dovecot] maildir locking and 'racing'
by William Ross 02 Mar '06

02 Mar '06

hello Timo, list, quick error-message question. A few of the accounts on my main mailserver are failing to log in with errors like this: dovecot: Mar 02 19:33:35 Error: imap(user(a)example.com): maildir_file_do(/var/lib/vpopmail/domains/example.com/user/Maildir) racing if I log in by telnet everything is fine, and from the source it looks like the error happens when dovecot fails to get a lock on some important file or other. Could it be to do with concurrent connections? No idea. Has anyone seen this, and can you suggest a quick fix? I can't see any obvious difference between the accounts that work and those that don't :( nb. this is with vpopmail, and the Maildirs have just been moved over from another server that was also running the same version of dovecot. Some of the accounts do work. Perhaps it's just an obscure file permissions problem, or something? I'd be very glad of any suggestions. thank you, will

1 0

RE: [Dovecot] ipv6 not working
by Bas van den Dikkenberg 02 Mar '06

02 Mar '06

Thanxs Works great now Met vriendelijk groet, Bas van Dikkenberg GISkit bv BFVD1-RIPE Tel: +3130-6340430 Fax: +3130-6342433 Prive Tel: +3130-6372769 Mob: +316-52384841 -----Oorspronkelijk bericht----- Van: Johannes Berg [mailto:johannes@sipsolutions.net] Verzonden: donderdag 2 maart 2006 14:04 Aan: Bas van den Dikkenberg CC: dovecot(a)dovecot.org Onderwerp: Re: [Dovecot] ipv6 not working On Thu, 2006-03-02 at 13:31 +0100, Bas van den Dikkenberg wrote: > > imap_listen = * > > pop3_listen = * Leave those out. works for me (on linux, if you're on BSD that might result in it not listening on ipv4 or something) johannes

1 0

[Dovecot] ipv6 not working
by Bas van den Dikkenberg 02 Mar '06

02 Mar '06

I added an listner to dovecot bye adding the following lines to config but no result no connectivity with ipv6: imap_listen = [::] pop3_listen = [::] imap_listen = * pop3_listen = * Met vriendelijk groet, Bas van Dikkenberg GISkit bv BFVD1-RIPE Tel: +3130-6340430 Fax: +3130-6342433 Prive Tel: +3130-6372769 Mob: +316-52384841

2 1