- dovecot - dovecot.org

Permission problem when using sieve script
by tacodewolff＠gmail.com 07 Feb '24

07 Feb '24

Hi, I've been banging my head on this problem for a while now and need some help on this issue. I've set up Dovecot with Sieve scripts, which use bash scripts to either learn ham or learn spam. This is sent to the Rspamd controller (using a Unix socket at /var/run/rspamd/rspamd-controller.sock). The socket has permissions 660 and is owned by _rspamd:_rspamd. It's directory and parent directory have 755. The sieve script looks like: exec /usr/bin/rspamc -h /var/run/rspamd/rspamd-controller.sock -P 'password' learn_ham I've added the dovecot user to the _rspamd group, but I consistently get "Permission denied" when marking emails as ham/spam. Only when I make the socket permission 666 it works correctly. Also when the permission is 660 but ownership is _rspamd:dovecot it works as well. I don't want the former as anyone could connect, and the latter can't be set automatically in Rspamd. I'm pulling my hairs out. I've tried to figure out the user and group that dovecot uses to run the sieve script (creatively by 'exit'ing the bash script with the uid or gid as error code), and they are both 97 (i.e. dovecot uid and gid). I've tried personally logging in as dovecot using 'sudo -u dovecot bash' and then using 'socat' to connect to the socket. This works fine. But through the dovecot sieve script for some reason it's not working. I've tried disabling SELinux and fapolicyd, but no luck. Is Dovecot using some restricted permissions when running sieve scripts? # dovecot --version 2.3.16 (7e2e900c1a) Thank you, Taco

1 1

Auth USER lookup failed
by thecoudge＠gmail.com 06 Feb '24

06 Feb '24

I have dovecot working with PAM and Samba DC authentication for IMAP. However when I'm attempting to pass emails from postfix via LMTP I don't actually need to authenticate LMTP I'm happy to check for valid users upstream. I'm getting the error: Feb 06 15:11:39 Debian-server postfix/local[178200]: ADF0E78713C: passing <dom.username(a)Debian-server.sr.local> to transport=lmtp Feb 06 15:11:39 Debian-server dovecot[178075]: auth: Error: static(dom.username): passdb doesn't support lookups, can't verify user's existence Feb 06 15:11:39 Debian-server dovecot[178075]: lmtp(dom.username(a)Debian-server.sr.local)<178233><GJ/9Nou/wWU5uAIAiShiCA:T2>: Error: auth-master: userdb lookup(dom.username(a)Debian-server.sr.local): Auth USER lookup failed Feb 06 15:11:39 Debian-server dovecot[178075]: lmtp(178233): Error: lmtp-server: conn unix:pid=178201,uid=111 [4]: rcpt dom.username(a)Debian-server.sr.local: Failed to lookup user dom.usernamey(a)Debian-server.sr.local: Internal error occurred. Refer to server log for more information. Doveconf -n: auth_username_format = %Ln disable_plaintext_auth = no mail_gid = vmail mail_location = maildir:/var/mail/virtual/%d/%n mail_privileged_group = mail mail_uid = vmail namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { args = mail driver = pam } plugin { sieve = file:~/sieve;active=~/.dovecot.sieve } protocols = " imap lmtp lmtp" service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0666 user = postfix } } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0600 user = postfix } } ssl_cert = </etc/dovecot/private/dovecot.pem ssl_client_ca_dir = /etc/ssl/certs ssl_dh = # hidden, use -P to show it ssl_key = # hidden, use -P to show it protocol lmtp { passdb { args = allow_all_users=yes driver = pam name = } }

2 1

possible wrong sql syntax ?
by Maurizio Caloro 06 Feb '24

06 Feb '24

hi i dont know exactly what succeeded but me alias don't run any more :-/ i know i used to be able to send mail via aliases from mae to markus(a)domain.com The names have of course been changed, simply for reasons of data protection. frendly asking i need little help, i think i have syntax mistake on mysql syntax call please why auth-worker don't find the alias mae, and send back "unknown user" ? emails send to markus(a)domain.com and also other mail adresses will run without problems. only the function alias no longer wants to. Feb 05 Time Dovecot/lmtp(279699): Info: Connect from local Feb 05 Time Dovecot/auth-worker(279700): Info: conn unix:auth-worker (pid=279685,uid=113): auth-worker<5>: sql(mae(a)domain.com): unknown user Feb 05 Time Dovecot/lmtp(279699): Info: Disconnect from local: Client has quit the connection (state=READY) dovecot.conf [snip] passdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } userdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } cat auth-sql.conf.ext [snip] passdb { driver = mysql args = /etc/dovecot/dovecot-sql.conf } userdb { driver = mysql args = /etc/dovecot/dovecot-sql.conf } # cat dovecot-sql.conf driver = mysql connect = host=localhost dbname=mailserver user=username password= default_pass_scheme = CRYPT user_query = SELECT '/srv/vmail/%d/%n' AS home, '10000' AS uid, '10000' AS gid, CONCAT('*:storage=', (quota*1024)) as quota_rule FROM mailbox WHERE username='%u' AND active = 1 password_query = SELECT username AS user, password, '/srv/vmail/%d/%n' AS userdb_home, '10000' AS userdb_uid, '10000' AS userdb_gid, CONCAT('maildir:storage=', (quota*1024)) as userdb_quota FROM mailbox WHERE username='%u' AND active = 1 yes this exist as mailbox # dovecot user markus(a)domain.com field value uid 10000 gid 10000 home /srv/vmail/domain.com/markus mail maildir:~/Maildir quota_rule *:storage=0 yes the mae are only a alias, so i think this are right!? # dovecot user mae(a)domain.com userdb lookup: user mae(a)domain.com doesn't exist field value MariaDB [mailserver]> SELECT * FROM mailbox; +------------------ +----------+--------+---------------------+------------+------------+---------+ | username | password | name | maildir | local_part | domain | active | +-------------------+----------+--------+---------------------+------------+------------+---------+ | markus(a)domain.com | ******** | markus | domain.com/markus/ | Markus M | domain.com | 1 | MariaDB [mailserver]> SELECT * FROM alias; +-----------------+--------------------+------------+--------+ | address | goto | domain | active | +-----------------+---------------------------------+--------+ | mae(a)domain.com | markus(a)domain.com | domain.com | 1 | +-----------------+---------------------------------+--------+ 34 rows in set (0.001 sec) dovecot --version 2.3.13 (89f716dc2) postconf mail_version 3.5.23 mysql Ver 15.1 Distrib 10.5.21-MariaDB debian 11 bullseye

1 0

Sieve question: Rewriting from using variables (ccsend issues)
by Ian Evans 06 Feb '24

06 Feb '24

As a journalist, I deal with a lot of PR companies that use constant contact. For years, I've built up a nice sieve filter that sports these people into my PR folder. I guess to help with dkim/SPF issues, Constant Contact has started rewriting the from header to the sender's address rewritten to end with a ccsend domain. The sender's actual email address is now in the reply-to header. This has resulted in all my PR emails ending up in the main inbox. Rather than rewrite hundreds of rules, I asked (foolishly?) ChatGPT if there was a way to check for ccsend in the from and then use the reply-to as the from. This is what it came up with and this would be the first rule in the sieve file: #Many PR companies use ccsend for lists. Check if headers contain "ccsend" and #then use reply-to for rules if allof (header :contains "from" "ccsend") { # Set "Reply-To" as "From" address set "from" "${reply-to}"; } Before I put this into production, will this work? Do the rest of the rules go inside the last curly bracket or after it? Thanks for any advice. As a journalist, I deal with a lot of PR companies that use constant contact. For years, I've built up a nice sieve filter that sports these people into my PR folder. I guess to help with dkim/SPF issues, Constant Contact has started rewriting the from header to the sender's address rewritten to end with a ccsend domain. The sender's actual email address is now in the reply-to header. This has resulted in all my PR emails ending up in the main inbox. Rather than rewrite hundreds of rules, I asked (foolishly?) ChatGPT if there was a way to check for ccsend in the from and then use the reply-to as the from. This is what it came up with and this would be the first rule in the sieve file: #Many PR companies use ccsend for lists. Check if headers contain "ccsend" and #then use reply-to for rules if allof (header :contains "from" "ccsend") { # Set "Reply-To" as "From" address set "from" "${reply-to}"; } Before I put this into production, will this work? Do the rest of the rules go inside the last curly bracket or after it? Thanks for any advice.

1 0

submission_add_received_header option?
by Ellie McNeill 05 Feb '24

05 Feb '24

Hi, I've recently upgraded my mail server from Debian 11 to Debian 12. It now runs dovecot 2.3.19.1 (verified with dovecot --version). According to the "Dovecot Core Settings" page, a new setting 'submission_add_received_header' was added in dovecot 2.3.19 to give admins the option of hiding the IP of the sending client when using dovecot's submissiond: https://doc.dovecot.org/3.0/settings/core/ However, when I place this option in my config, dovecot refuses to start and says that the option is not recognised: doveconf: Fatal: Error in configuration file /etc/dovecot/conf.d/20-submission.conf line 92: Unknown setting: submission_add_received_header Can anyone help me with this? Ellie

5 5

Recommended changes for delivery from Exim
by jgh＠exim.org 05 Feb '24

05 Feb '24

Hi, Security changes to Exim have invalidated certain suggested configurations in the Dovecot wiki. As I do not have a Dovecot installation to test, I am not going to write any updates there. It would be good if someone would test these suggestions and then make updates as needed. 1) The use of $local_part and $domain in commands run by the "pipe" transport will be disallowed in the upcoming Exim release. These are currently noted as optional, with the "-m" flag to dovecot-lda. They should be replaced with validated (untainted) versions, commonly $local_part_data and $domain_data, developed via one of the several de-taint methods documented for Exim. The same applies to $original_local_part and $original_domain. 2) The use of $sender_address will likewise be disallowed. This and the "-f" flag can be dropped from the dovecot-lda command line, and the specification of a null "message_prefix" option removed. The defaults for a pipe transport will then prefix the message with a suitable Mbox "From " header line, which dovecot-lda is documented to extract the sender from. Both of these suggestions are back-compatible to the current 4.95 release of Exim, and will be required with the 4.96 release. -- Cheers, Jeremy Refs: - https://wiki.dovecot.org/LDA/Exim - https://doc.dovecot.org/configuration_manual/protocols/lda/

3 3

Problem with share mailbox
by Frédéric FONDRIEST 05 Feb '24

05 Feb '24

Hi all, we get some problems with sharing mailbox between users. when we share something the dovecot-acl file is updated, but the shared-mailboxes.db file is not created nor updated. Even if we create the file and set permission to 777... strangely the debug log gives : 2024-02-05 09:29:04 imap(xxxxxx)<13741><SA8qQZ4QBIsKDMcL>: Debug: dict(file): dict created (uri=file:/tmp/shared-mailboxes.db, base_dir=/var/run/dovecot) 2024-02-05 09:29:04 imap(xxxxxx)<13741><SA8qQZ4QBIsKDMcL>: Debug: open(/proc/self/io) failed: Permission denied we don't understand why we get this kind of message. we search on this mailing list without any clean explaination. we expect a bug somewhere.. any ideas ? system is : debian 12 dovecot 2.3.19.1 (9b53102964) # 2.3.19.1 (9b53102964): /etc/dovecot/dovecot.conf # Pigeonhole version 0.5.19 (4eae2f79) # OS: Linux 6.1.0-17-amd64 x86_64 Debian 12.4 auth_master_user_separator = * auth_mechanisms = plain login auth_username_format = %n base_dir = /var/run/dovecot log_path = /var/log/dovecot.log log_timestamp = "%Y-%m-%d %H:%M:%S " mail_debug = yes mail_gid = 5000 mail_home = /home/vmail/%u mail_location = /home/vmail/%u/Maildir mail_plugins = acl mail_log acl mail_log mail_privileged_group = mail mail_uid = 5000 namespace { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = separator = / type = private } namespace { list = children location = maildir:%%h/Maildir:INDEX=~/Maildir/shared/%%u:INDEXPVT=~/Maildir/shared/%%u prefix = shared/%%u/ separator = / subscriptions = no type = shared } passdb { args = /etc/dovecot/master-users driver = passwd-file master = yes } passdb { args = /etc/dovecot/dovecot-ldap-passdb.conf driver = ldap name = ldap } plugin { acl = vfile acl_shared_dict = file:/tmp/shared-mailboxes.db acl_user = %u master_user = %u } protocols = imap lmtp service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } } service lmtp { inet_listener lmtp { address = * port = 24 } user = vmail } ssl_cert = </etc/ssl/mail.crt ssl_key = # hidden, use -P to show it userdb { args = /etc/dovecot/dovecot-ldap-userdb.conf driver = ldap name = ldap } protocol imap { imap_client_workarounds = delay-newmail imap_max_line_length = 64 k mail_max_userip_connections = 20 mail_plugins = acl imap_acl } protocol lda { info_log_path = log_path = mail_plugins = mail_log postmaster_address = postmaster@xxx quota_full_tempfail = yes syslog_facility = mail } protocol lmtp { info_log_path = log_path = mail_plugins = mail_log postmaster_address = postmaster@xxx quota_full_tempfail = yes } Hi all, we get some problems with sharing mailbox between users. when we share something the dovecot-acl file is updated, but the shared- mailboxes.db file is not created nor updated. Even if we create the file and set permission to 777... strangely the debug log gives : 2024-02-05 09:29:04 imap(xxxxxx)<13741><SA8qQZ4QBIsKDMcL>: Debug: dict(file): dict created (uri=file:/tmp/shared-mailboxes.db, base_dir=/var/run/dovecot) 2024-02-05 09:29:04 imap(xxxxxx)<13741><SA8qQZ4QBIsKDMcL>: Debug: open(/proc/ self/io) failed: Permission denied we don't understand why we get this kind of message. we search on this mailing list without any clean explaination. we expect a bug somewhere.. any ideas ? system is : debian 12 dovecot 2.3.19.1 (9b53102964) # 2.3.19.1 (9b53102964): /etc/dovecot/dovecot.conf # Pigeonhole version 0.5.19 (4eae2f79) # OS: Linux 6.1.0-17-amd64 x86_64 Debian 12.4 auth_master_user_separator = * auth_mechanisms = plain login auth_username_format = %n base_dir = /var/run/dovecot log_path = /var/log/dovecot.log log_timestamp = "%Y-%m-%d %H:%M:%S " mail_debug = yes mail_gid = 5000 mail_home = /home/vmail/%u mail_location = /home/vmail/%u/Maildir mail_plugins = acl mail_log acl mail_log mail_privileged_group = mail mail_uid = 5000 namespace { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = separator = / type = private } namespace { list = children location = maildir:%%h/Maildir:INDEX=~/Maildir/shared/%%u:INDEXPVT=~/Maildir/ shared/%%u prefix = shared/%%u/ separator = / subscriptions = no type = shared } passdb { args = /etc/dovecot/master-users driver = passwd-file master = yes } passdb { args = /etc/dovecot/dovecot-ldap-passdb.conf driver = ldap name = ldap } plugin { acl = vfile acl_shared_dict = file:/tmp/shared-mailboxes.db acl_user = %u master_user = %u } protocols = imap lmtp service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } } service lmtp { inet_listener lmtp { address = * port = 24 } user = vmail } ssl_cert = </etc/ssl/mail.crt ssl_key = # hidden, use -P to show it userdb { args = /etc/dovecot/dovecot-ldap-userdb.conf driver = ldap name = ldap } protocol imap { imap_client_workarounds = delay-newmail imap_max_line_length = 64 k mail_max_userip_connections = 20 mail_plugins = acl imap_acl } protocol lda { info_log_path = log_path = mail_plugins = mail_log postmaster_address = postmaster@xxx quota_full_tempfail = yes syslog_facility = mail } protocol lmtp { info_log_path = log_path = mail_plugins = mail_log postmaster_address = postmaster@xxx quota_full_tempfail = yes }

4 7

Splitting up packages
by Larry Rosenman 01 Feb '24

01 Feb '24

I'm the maintainer of the dovecot and pigeonhole ports on FreeBSD and am looking to make separate installable packages like the project does for Linux. Can you help me know what needs to go where and what options (if any) change the base? Thanks for any help here. -- Larry Rosenman http://www.lerctr.org/~ler Phone: +1 214-642-9640 (c) E-Mail: larryrtx(a)gmail.com US Mail: 5708 Sabbia Dr, Round Rock, TX 78665-2106 I'm the maintainer of the dovecot and pigeonhole ports on FreeBSD and am looking to make separate installable packages like the project does for Linux. Can you help me know what needs to go where and what options (if any) change the base? Thanks for any help here. -- Larry Rosenman http://www.lerctr.org/~ler Phone: +1 214-642-9640 (c) E-Mail: larryrtx(a)gmail.com US Mail: 5708 Sabbia Dr, Round Rock, TX 78665-2106

3 2

We couldn't drop root group privileges
by forumforeign 01 Feb '24

01 Feb '24

Hello. I have - dovecot 2.3.21 (also tried 2.3.5) - postfix 3.8.5 (also tried 3.8.4) It's a new setup where I use postfix + dovecot-delivery for delivery to local mailbox. At logs I have an error and mail deffers in queue: dovecot: [ID 702911 mail.crit] lda(poli(a)domain.com)<7808>: Fatal: We couldn't drop root group privileges (wanted=6(mail), gid=0(root), egid=0(root)) Postfix and dovecot start from root UID, but user dovecot/postfix has corresponding groups to run as specific group: root@solaris:# id -a dovecot uid=110(dovecot) gid=110(dovecot) groups=110(dovecot),6(mail) root@solaris:# id -a postfix uid=26(postfix) gid=26(postfix) groups=26(postfix),6(mail) root@solaris:# id -a root uid=0(root) gid=0(root) groups=0(root),1(other),2(bin),3(sys),4(adm),6(mail),7(tty),8(lp),12(daemon) Also, when I run a dtrace (a system call trace mechanism) I see, that dovecot-lda runs as group "mail" (gid=6), so, there isn't any problem, but dovecot thinks another: UID GID PID PPID ARGS 0 26 7719 7638 pipe -n dovecot -t unix flags=DRhu user=nobody:mail argv=/usr/libexec/dovecot/d 60001 6 7720 7718 /usr/libexec/dovecot/dovecot-lda -f mega(a)domain.com -d poli(a)domain.com 60001 6 7720 7718 /usr/bin/amd64/doveconf -f service=lda -c /etc/dovecot/dovecot.conf -m lda -e / 60001 6 7720 7718 /usr/libexec/dovecot/dovecot-lda -f mega(a)domain.com -d poli(a)domain.com What exactly dovecot wants and how to solve this error? Here is part of "dovecot -n" output which is corresponding to user/group/lda: # 2.3.5.1 (7ec6d0ade): /etc/dovecot/dovecot.conf # Pigeonhole version 0.5.6 (92dc263a) # OS: SunOS 5.11 i86pc # Hostname: solaris auth_debug = yes auth_mechanisms = plain login auth_verbose = yes default_process_limit = 99 disable_plaintext_auth = no first_valid_gid = 6 first_valid_uid = 60001 last_valid_gid = 6 last_valid_uid = 60001 mail_access_groups = mail mail_debug = yes mail_gid = 6 mail_location = /var/mail/vmail/%u@%d mail_max_userip_connections = 99 mail_privileged_group = mail mail_uid = 60001 maildir_very_dirty_syncs = yes ... service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0666 user = postfix } } ... protocol lda { mail_plugins = " sieve" postmaster_address = postmaster } PS. Also, I have aother box with very old setup (dovecot 2.2.27) and it works with the same configuration without any errors. I thought that this is OS specific problem and tried on the same version OS run a dovecot 2.3.21, but still had an errors.

1 1

Emails automatically thread by subject, no matter how old or unrelated
by wakod67943＠flexvio.com 01 Feb '24

01 Feb '24

To preface, I’m using the Crossbox mail client hosted by MXroute. I was directed to Dovecot support when I made my inquiry to the former’s developers. Apparently, when you write an email subject that is verbatim to another, previously sent email, the two become linked in a conversation thread. I could have an email from 1996 titled “Groceries” and if I make one today titled “Groceries” my inbox would have them connected as one long thread. I’m getting email threads in the 100s because of this. Crossbox people have told me it’s not something they have control over. They mentioned it being a Dovecot problem. Has anyone encountered this? It would be tremendously inconvenient to ensure that every email I ever send from now on has a unique subject so to as not have them threaded together. Let me be clear, email threading and conversation views are extremely useful. I just want them to be…relevant to the chain of emails that are being looked at. Is there a way to group threads by unique header information? It is becoming borderline unusable to sift through invoices.

3 2

JMAP support?
by Mark Constable 31 Jan '24

31 Jan '24

On Fri Jan 25 2019 Aki wrote: > There is no JMAP support in any dovecot version yet. Two years on so what is the status of JMAP support in Dovecot now?

7 10

doveadm sync failed after adding "mechanisms = plain login" to passdb
by James 31 Jan '24

31 Jan '24

Hello, After adding `mechanisms = plain login` to passdb (passwd-file), `doveadm -D sync -u e(a)example.com -d -N -l 30 -U` failed with ``` Jan 26 06:49:22 doveadm(e(a)example.com): Error: remote(server2.example.com:61526): doveadm(1.1.1.1,e(a)example.com): auth-master: passdb lookup(e(a)example.com): Auth PASS lookup failed Jan 26 06:49:22 doveadm(e(a)example.com): Error: remote(server2.example.com:61526): doveadm(1.1.1.1,e(a)example.com): /run/dovecot/auth-userdb: passdb lookup failed (to see if user is proxied, because doveadm_port is set) ``` With `auth_debug=yes`, I found these lines. ``` Jan 26 04:55:37 server2 dovecot: auth: Debug: skipping passdb: mechanism filtered Jan 26 04:55:37 server2 dovecot: auth: Error: All password databases were skipped ``` What should I do to fix it without deleting `mechanisms = plain login`? More information could be found on [this link](https://github.com/orgs/docker-mailserver/discussions/3836#discussion…. Thanks

1 0

Re: JMAP support?
by Marcel Schmidt 30 Jan '24

30 Jan '24

Hi, is there any progress on this? Since the IETF draft is long completed, will you integrate JMAP in a coming dovecot version or is this topic completely abandoned? Marcel Hi, is there any progress on this? Since the IETF draft is long completed, will you integrate JMAP in a coming dovecot version or is this topic completely abandoned? Marcel

1 0

One Way sync is deleting emails
by Steve Moser 30 Jan '24

30 Jan '24

Hello, I am hoping that you can help me. I am running this command on my main email server, one way backup/sync to the backup server. sudo doveadm sync -1 -A remote:root@x.x.x.x x.x.x.x is my remote server. I will add a new email on the main, run the command and it shows up on the backup. - Great! Now I delete that email from the main, run the command and the email is removed from the backup. That should not delete anything from the backup, correct? I prefer Not to delete anything, only update/add. Do you see what I am doing wrong? Thank You!!!! Here my installed versions dovecot-core 1:2.3.16+dfsg1-3ubuntu2.2 dovecot-imapd 1:2.3.16+dfsg1-3ubuntu2.2 dovecot-lmtpd 1:2.3.16+dfsg1-3ubuntu2.2 dovecot-mysql 1:2.3.16+dfsg1-3ubuntu2.2 dovecot-pop3d 1:2.3.16+dfsg1-3ubuntu2.2 postfix 3.6.4-1ubuntu1.2 amd64 High-performance mail transport agentpostfix-mysql 3.6.4-1ubuntu1.2 amd64 MySQL map support for Postfixpostfix-policyd-spf-python 2.9.3-1 all Postfix policy server for SPF checking Hello, I am hoping that you can help me. I am running this command on my main email server, one way backup/sync to the backup server. sudo doveadm sync -1 -A remote:root@x.x.x.x x.x.x.x is my remote server. I will add a new email on the main, run the command and it shows up on the backup. - Great! Now I delete that email from the main, run the command and the email is removed from the backup. That should not delete anything from the backup, correct? I prefer Not to delete anything, only update/add. Do you see what I am doing wrong? Thank You!!!! Here my installed versions dovecot-core 1:2.3.16+dfsg1-3ubuntu2.2 dovecot-imapd 1:2.3.16+dfsg1-3ubuntu2.2 dovecot-lmtpd 1:2.3.16+dfsg1-3ubuntu2.2 dovecot-mysql 1:2.3.16+dfsg1-3ubuntu2.2 dovecot-pop3d 1:2.3.16+dfsg1-3ubuntu2.2 postfix 3.6.4-1ubuntu1.2 amd64 High-performance mail transport agent postfix-mysql 3.6.4-1ubuntu1.2 amd64 MySQL map support for Postfix postfix-policyd-spf-python 2.9.3-1 all Postfix policy server for SPF checking

2 1

sieve filter generated email- sent folder
by joe a 29 Jan '24

29 Jan '24

dovecot 2.3.21 pigeonhole 0.5.21. Filters created via roundcube. Attempting to have filters detect certain email, send a notification text message to mobile via email, and copy that notification email to "Sent" folder. Filter(s) detect condition, move the email to desired folder and appear, as note in logs outside of dovecot, to sent the notification email. The notification email is not recorded in "Sent" folder and is not received by mobile device. Is this a "do-able" thing in dovecot/pigeonhole? If so, how? Docs available?

3 4

fts indexer stuck on very large plaintext messages
by p h 29 Jan '24

29 Jan '24

Hi, I recently fts indexed a users mailbox with xapian which had 10-15 very large plaintext messages (>20Mb). The content of these messages was mostly a list of all files on a linux server (tripwire and backup reports). The indexer-worker process was completely stuck processing these messages, cpu pegged at 100% running continuously for multiple days. I was wondering if there is way to avoid this issue. It would be great if I could configure limits for the fts indexing process.

2 1

shared mailbox replication
by micha＠micha.waw.pl 28 Jan '24

28 Jan '24

We use a shared mailbox, where incoming mails from customers are stored. Every user can see it as "shared/contact(a)domain.name". When a new message comes, any user who is currently available just takes the message and does something with it. It's configured this way: namespace shared { type = shared separator = / prefix = shared/%%u/ location = maildir:%%h/.maildir:LAYOUT=fs:INDEX=~/.shared/%%u subscriptions = no list = children } It worked perfectly until I set up replication. Now we have a mess, because a message moved/deleted on one server are replicated beck form another. This is known issue. The documentation says it clear: "Warning Shared folder replication doesn’t work correctly. Mainly it can generate a lot of duplicate emails. This is because there’s currently a per-user lock that prevents multiple dsyncs from working simultaneously on the same user. But with shared folders multiple users can be syncing the same folder. So this would need additional locks (e.g. shared folders would likely need to lock the owner user, and public folders would likely need a per-folder lock or maybe a global public folder lock). There are no plans to fix this." I understand "There are no plans to fix this." But... maybe there is a workaround? I am sure someone before me had already this problem... :-)

1 0

Tests fail 2.3.21 in aarch64 build
by Peter 28 Jan '24

28 Jan '24

Building Dovecot 2.3.21 for aarch64 (building with qemu emulation) I get the following in the test stage: test-file-cache.c:266: Assert failed: file_cache_set_size(cache, 1024) == -1 Panic: file test-common.c: line 211 (test_expect_error_string_n_times): assertion failed: (expected_errors == 0) test-common.c:245: Assert failed: suppress == TRUE Error: Raw backtrace: ./test-lib(+0x693f0) [0x7f10b36943f0] -> ./test-lib(+0x6d8e4) [0x7f10b36988e4] -> ./test-lib(+0x75110) [0x7f10b36a0110] -> ./test-lib(+0x75168) [0x7f10b36a0168] -> ./test-lib(+0x15534) [0x7f10b3640534] -> ./test-lib(+0x152ec) [0x7f10b36402ec] -> ./test-lib(+0x3411c) [0x7f10b365f11c] -> ./test-lib(+0x15e64) [0x7f10b3640e64] -> /lib64/libc.so.6(+0x2c79c) [0x40000087579c] -> /lib64/libc.so.6(__libc_start_main+0x98) [0x40000087586c] -> ./test-lib(+0x163f0) [0x7f10b36413f0] qemu: uncaught target signal 6 (Aborted) - core dumped I'll provide more info on request. Is this just an issue with the tests or is it an issue with Dovecot itself? Peter

1 0

Azure AD / Entra Id OAuth2 issue, username not recognized
by meint＠meint.net 26 Jan '24

26 Jan '24

Dovecot version 2.3.16 Trying to use Azure AD / Entra Id with OAuth2 authentication, I have most of it working but somehow Dovecot fails to map / recognize the username, hopefully somebody can point out what I'm doing wrong? Excerpt from log: Jan 26 09:13:20 localhost dovecot: auth: Debug: http-client: conn [2603:1026:3000:108::4]:443 [1]: Got 200 response for request [Req1: POST https://login.microsoftonline.com/79b065d9-761f-4b79-a5cb-71a452f452af/oaut…] OK (took 220 ms + 82 ms in queue) Jan 26 09:13:20 localhost dovecot: auth: Debug: oauth2(test-external@secumailer.com,2a05:d018:ebe:d005:22b6:dc4b:41c6:7fec): Password grant succeeded Jan 26 09:13:20 localhost dovecot: auth: Debug: oauth2(test-external@secumailer.com,2a05:d018:ebe:d005:22b6:dc4b:41c6:7fec): Processing field token_type Jan 26 09:13:20 localhost dovecot: auth: Debug: oauth2(test-external@secumailer.com,2a05:d018:ebe:d005:22b6:dc4b:41c6:7fec): Processing field scope Jan 26 09:13:20 localhost dovecot: auth: Debug: oauth2(test-external@secumailer.com,2a05:d018:ebe:d005:22b6:dc4b:41c6:7fec): Processing field expires_in Jan 26 09:13:20 localhost dovecot: auth: Debug: oauth2(test-external@secumailer.com,2a05:d018:ebe:d005:22b6:dc4b:41c6:7fec): Processing field ext_expires_in Jan 26 09:13:20 localhost dovecot: auth: Debug: oauth2(test-external@secumailer.com,2a05:d018:ebe:d005:22b6:dc4b:41c6:7fec): Processing field access_token Jan 26 09:13:20 localhost dovecot: auth: Error: oauth2(test-external@secumailer.com,2a05:d018:ebe:d005:22b6:dc4b:41c6:7fec): oauth2 failed: Password grant failed: No username returned I'm using Resource Owner Password Grant flow. I have the following configured in conf.d/auth-oauth.conf.ext: passdb { driver = oauth2 mechanisms = plain args = /etc/dovecot/dovecot-oauth2.plain.conf.ext } I have the following configured in dovecot-oauth2.plain.conf.ext: grant_url = https://login.microsoftonline.com/<redacted>/oauth2/v2.0/token client_id = <redacted> client_secret = <redacted> username_attribute = email use_grant_password = yes scope = api://<redacted>/mail-relay debug = yes rawlog_dir = /tmp/oauth2 I have the following response from the oauth raw logs: out: 1706256800.309971 POST /<redacted>/oauth2/v2.0/token HTTP/1.1 1706256800.309971 Host: login.microsoftonline.com 1706256800.309971 Date: Fri, 26 Jan 2024 08:13:20 GMT 1706256800.309971 User-Agent: dovecot-oauth2-passdb/2.3.16 1706256800.309971 Content-Length: 255 1706256800.309971 Connection: Keep-Alive 1706256800.310013 Content-Type: application/x-www-form-urlencoded 1706256800.310018 1706256800.310056 grant_type=password&username=test-external(a)example.org&password=<redacted>&client_id=<redacted>&client_secret=<redacted>&scope=api:%2f%2f<redacted>%2fmail-relay in: 1706256800.530754 HTTP/1.1 200 OK 1706256800.530754 Cache-Control: no-store, no-cache 1706256800.530754 Pragma: no-cache 1706256800.530754 Content-Type: application/json; charset=utf-8 1706256800.530754 Expires: -1 1706256800.530754 Strict-Transport-Security: max-age=31536000; includeSubDomains 1706256800.530754 X-Content-Type-Options: nosniff 1706256800.530754 P3P: CP="DSP CUR OTPi IND OTRi ONL FIN" 1706256800.530754 x-ms-request-id: 629ce7bf-a5e9-4655-9019-83690c8b4400 1706256800.530754 x-ms-ests-server: 2.1.17122.2 - SEC ProdSlices 1706256800.530754 X-XSS-Protection: 0 1706256800.530754 Set-Cookie: fpc=Am8EyNTmX2ZOkMLj2MB82W4gKLwwAQAAAJ9gRd0OAAAA; expires=Sun, 25-Feb-2024 08:13:20 GMT; path=/; secure; HttpOnly; SameSite=None 1706256800.530754 Set-Cookie: x-ms-gateway-slice=estsfd; path=/; secure; samesite=none; httponly 1706256800.530754 Set-Cookie: stsservicecookie=estsfd; path=/; secure; samesite=none; httponly 1706256800.530754 Date: Fri, 26 Jan 2024 08:13:20 GMT 1706256800.530754 Content-Length: 1979 1706256800.530754 1706256800.530754 {"token_type":"Bearer","scope":"api://<redacted>/mail-relay","expires_in":5296,"ext_expires_in":5296,"access_token":"eyJ0eX ...<redacted>"} If I inspect the access token I'm getting: { "aud": "<redacted>", "iss": "<redacted>", "iat": 1706256500, "nbf": 1706256500, "exp": 1706262097, "acr": "1", "aio": "ATQAy/8VAAAANgbkS6NmHL3yGyROhLM28ooLX57pCjHjp0TGtd7EjwgVZy/i2aEqfV6sxiHeGZ0N", "amr": [ "pwd" ], "appid": "<redacted>", "appidacr": "1", "email": "test-external(a)example.org", "ipaddr": "<redacted>", "login_hint": "<redacted>", "name": "test-external", "oid": "657401f0-c9f0-402c-af6f-9ef063e7a281", "preferred_username": "test-external(a)example.org", "rh": "0.ATEA2WWweR92eUuly3GkUvRSr08CZ45J3dRLnCQJZCVUYBcxAKo.", "scp": "mail-relay", "sub": "ST9owcQQN2e0tBsHiVjvR8SCdlfUR_114tJk4C2bRxg", "tid": "79b065d9-761f-4b79-a5cb-71a452f452af", "unique_name": "test-external(a)sexample.org", "upn": "test-external(a)example.org", "uti": "v-ecYumlVUaQGYNpDItEAA", "ver": "1.0" } The email attribute is present in the access token yet Dovecot doesnt appear to recognize it. What am I doing wrong?

2 3

Replication going away?
by Vladimir Mishonov 26 Jan '24

26 Jan '24

Hello everyone. Just saw this commit in the official Github repo: https://github.com/dovecot/core/commit/4c04e4c30fd4817a8b0e11d04d9681173f69… Looking at the commit details, it appears that it completely removes the replication feature. I'm a bit perplexed by this change and am not sure what might be the justification for it. Personally, I find replication to be very useful, as it allows me to maintain a synchronized mirror of all of my mailboxes on my home server, for use as backup in case the primary server goes down for some reason. Perhaps there's some sort of replacement being planned for this feature? Or maybe the relevant code is simply going to be refactored to a plugin or external program, and there's nothing to worry about at all? In any case, I'd greatly appreciate if one of the developers could comment on this change. -- Kind regards, a concerned user of Dovecot (Vladimir)

34 66

Error activating filter set
by joe a 25 Jan '24

25 Jan '24

Some success creating and using filters, created via roundcube, but, when testing activate and deactivating filter sets, received an error. However, I can edit and add filters without apparent error, even "importing" from an existing filter set. var/log/dovecot-info.log shows, in part: ([%user] refers to the active dovecot user, whose account seems to operate perfectly, aside from filters). Obfuscated out of habit. Form is user(a)domain.com. "Jan 24 15:44:49 managesieve([%user])<23204><Pk9VIrcPfKx/AAAB>: Info: Failed to activate script `dovecot.orig': Internal error occurred. Refer to server log for more information. [2024-01-24 15:44:49]" It is unclear, among other things, what and where this "server log" is. tail -f /var/log/messages shows nothing during the various traipsing about in filters Not just foggy outdoors lately.

1 1

IMAP Sieve fileinto :create intermediate folders
by dovecot-4tg＠freakin.rocks 25 Jan '24

25 Jan '24

I apologize if this isn't the appropriate place for this question. Consider a Sieve script with this instruction: fileinto :create "folder 1.folder 2.folder 3"; That faithfully creates in Maildir the folder named '.folder 1.folder 2.folder 3'/ An IMAP Client shows this in tree format as: - folder 1 - - folder 2 - - - folder 3 But there isn't really a "folder 2". That is, there is no Maildir '.folder 1.folder 2' so what happens in the MUA is really subject to its coding. In Thunderbird, for example, 'folder 2' is grayed out. You can't subscribe to it or drop a file into that folder because it is disabled. With no mail actually targeted to that folder, that's generally not a problem, but Thunderbird does raise errors as it attempts to scan folders, correctly claiming that it can't access the folder because it doesn't exist. That's irritating to the user. So to the questions: 1) Is there anything in Dovecot or Pidgeonhole Sieve that might allow us to auto-create the missing intermediate folders? Maybe using a vnd.dovecot.* extension or some sieve capability? 2) Aside from being inelegant, is there anything wrong with a cron script that creates missing Maildir folders? While I am developer, I haven't yet looked into the proper way to create and configure folders user folders. 3) Would it be more appropriate to create a new extension, implementation of some RFC, Lua script, or some other type of plugin that might get triggered on a fileinto operation? Again, I haven't looked deeply in this direction and could use a few RTM references. 4) Might there already exist an external script or custom extension that does this? 5) Might this be a worthy enhancement request for Dovecot or Pidgeonhole Sieve? Thanks! Dovecot 2.3.7.2 / Pidgeonhole 0.5.7.2 / Ubuntu v20

1 0

lda or lmtp for sieve?
by Joe Acquisto 25 Jan '24

25 Jan '24

I noticed that many places in the documentation and in examples gleaned from the wilderness, refer to the LDA protocol when discussing sieve. The documentation also mentions that lmtp is preferred over lda, and seems to say in places that sieve will operate without issue in either case. Does it matter to sieve implementation if one uses only lmtp?

7 13

Can Dovecot use an MH data store?
by Steve Litt 24 Jan '24

24 Jan '24

Hi all, I know Dovecot can use a Maildir mail store and a Mailbox mail store. Can it also use an MH mail store? If so, is there a way of getting procmail to dump messages into the correct MH folder? Thanks, SteveT Steve Litt Autumn 2023 featured book: Rapid Learning for the 21st Century http://www.troubleshooters.com/rl21

1 0

Re: "Connection reset by peer" errors with Outlook
by Joseph Tam 24 Jan '24

24 Jan '24

From: Steve Dondley <s(a)dondley.com> > I have no idea what is triggering it for so many different users from legit > email addresses. Still investigating. But this appears to be a fail2ban > problem, not a dovecot problem. My logs are filled with failed authentication from Outlook clients. The clients seem to be trying different usernames (with/without domains), and maybe SSL/TLS flavours. My guess is Outlook is doing some autodiscovery/autoconfiguration thing, and occasionally hits the right combo and successfully authenticates. I'm not sure I would characterise this as a fail2ban problem. Fail2ban is doing what it says on the side of the tin: looking for repeated authentication failures, and blocking those that fail too many times. The real problem is Outlook fumble around for the correct settings, and mimicking a brute force attack. I've had great difficulty getting some Outlook clients to configure exactly the settings it should have (like excluding domain names from usernames). Try running his command line using Windows-R (not from cmd.exe). outlook.exe /PIM NoEmail This will avoid the auto-setup process that railroads you into frustration. MacOSX Mail app tries the same stuff, but at least you can turn that behaviour off and stop it from second guessing your settings. Joseph Tam <jtam.home(a)gmail.com>

2 1

Managesieve "config" unable to complete?
by joe a 23 Jan '24

23 Jan '24

What say we try this again, on a "blank slate"? Dovecot installed on OpenSuse Leap 15.5, from their supplied "dovecot23" package. That package claims to be Dovecot 2.3.21 and Pigeonhole 0.5.21 Unable to get managesieve to bind to port 4190. Output of dovecot -n attached. Various tools, including lsof, sockets, do not show 4190 in use. While grasping for/at straws, noticed this: ~: # lsof | grep manage config 19097 root mem REG 0,47 6896 257261 /usr/lib64/dovecot/modules/settings/libmanagesieve_settings.so config 19097 root mem REG 0,47 14696 257260 /usr/lib64/dovecot/modules/settings/libmanagesieve_login_settings.so Does that suggest an attempt to configure managesieve is unable to do so? What does it infer? Bad configuration? File ownership? File rights? Bug? Thanks for patience and forbearance

3 6

Strangeness in defining "protocols"
by joe a 23 Jan '24

23 Jan '24

Well, a strangeness to my view. Since this is an opensuse package and not the "lastest and greatest", not sure if I should post this here or "over there". It is a given that I may have, through some noobiness have bungled something early on that is causing this. I am prepared to accept the semi-public ritual shaming that may follow. All references to results mean per "dovecot -n". One can be assured that dovecot.conf was edited followed by "dovecot -n", then 20-managesieve.conf edited followed by "dovecot -n", for each "set". What happens is, it appears, that if one specifies or alters the "default" protocols in /etc/dovecot/dovecot.conf, any protocols subsequently defined, at least in /etc/dovecot/conf.d/20-managesieve.conf, are not honored. It does not seem to matter if it is specified as "protocols = sieve" or "protocols = $protocols sieve". Further, in /etc/dovecot/dovecot.conf, if one comments out "protocols", one finds protocols is not listed at all, unless there is a protocol defined later such as "sieve" in 20-managesieve.conf. if one lists "protocols = " then "protocols = " is listed even if a protocol is defined later such as "sieve" in 20-managesieve.conf of one lists "protocols = $protocols", nothing is listed, unless if: "protocols = sieve" is defined in 20-managesieve.conf, "protocols = sieve" is listed "protocols = $protocols sieve" is defined in 20-managesieve.conf - then "protocols = imap pop3 lmtp sieve" is listed. Again, all as shown by "dovecot -n" after editing each file(s). I hope this is useful in determining if there is a problem, and helps lead to a solution if one is warranted. I'll send this also to the openSuse list as a distinct email.

1 0

managesieve server not answering?
by Joe Acquisto 23 Jan '24

23 Jan '24

Trying to connect to managesieve server configured to port 4190. No go. Roundcube is configured (thunderbird apparently having nothing current), but selecting "Add Filter" (new since re-configured for managesieve) produces "unable to connect to server". Port 4190 does not seem to answer or be "bound" to anything. Telnet to 4190 produces "connection refused". A "one box" solution. If I had to guess, I would guess, operator error. Otherwise, things are looking up. But, I remember a movie that said never to do that . . .

6 32

Replication between three or more servers
by tomas.simonaitis＠gmail.com 23 Jan '24

23 Jan '24

Hi list members, documentation says "Replication works only between server pairs. If you have a large cluster, you need multiple independently functioning Dovecot backend pairs". Do I understant correctly, that in order to have replication between 3 servers, one would need to run 2 instances of dovecot on each server with (a bit) different configuration. e.g. Serv1: -- dovecot-1.conf .. plugin { mail_replica = tcps:Serv2:1234 } .. -- dovecot-2.conf .. plugin { mail_replica = tcps:Serv3:1234 } .. Serv2: -- dovecot-1.conf .. plugin { mail_replica = tcps:Serv1:1234 } .. -- dovecot-2.conf .. plugin { mail_replica = tcps:Serv3:1234 } .. etc. Won't two processes of dovecot in one machine (assuming local storage) conflict accessing same Maildirs? Thanks for any insights

1 0

doveadm http api not responding under load
by Achim Stahlberger 23 Jan '24

23 Jan '24

Hello, we see this problem when doveadm-server is under load. We enabled doveadm http api with this config: service doveadm { inet_listener { port = 50000 } inet_listener http { port = 50001 ssl = no } } When doveadm server receives at lot of connects on port 50000 the http service on port 50001 is not responding until load on port 50000 drops to zero. It seems like doveadm-server is prefering port 50000 over 50001. Looking into Recv-Q when http hangs Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port tcp LISTEN 129 128 0.0.0.0:50000 0.0.0.0:* tcp LISTEN 1 128 0.0.0.0:50001 0.0.0.0:* I used this script to produce load on port 50000 #!/bin/bash for i in {1..1000} do echo "124" | netcat localhost 50000 & done wait When this script is started it takes several seconds until a connect on port 50001 succeeds. We are using Dovecot version 2.3.20 (bdc808f24c). I think the problem is in src/lib/ioloop-epoll.c function io_loop_handler_run_internal. This might fix the problem (look for new variable rr): void io_loop_handler_run_internal(struct ioloop *ioloop) { struct ioloop_handler_context *ctx = ioloop->handler_context; struct epoll_event *events; const struct epoll_event *event; struct io_list *list; struct io_file *io; struct timeval tv; unsigned int events_count; int msecs, ret, i, j, k, rr; bool call; i_assert(ctx != NULL); /* get the time left for next timeout task */ msecs = io_loop_run_get_wait_time(ioloop, &tv); events = array_get_modifiable(&ctx->events, &events_count); if (ioloop->io_files != NULL && events_count > ctx->deleted_count) { ret = epoll_wait(ctx->epfd, events, events_count, msecs); if (ret < 0 && errno != EINTR) i_fatal("epoll_wait(): %m"); } else { /* no I/Os, but we should have some timeouts. just wait for them. */ i_assert(msecs >= 0); i_sleep_intr_msecs(msecs); ret = 0; } /* execute timeout handlers */ io_loop_handle_timeouts(ioloop); if (!ioloop->running) return; rr = ret>1 ? i_rand_limit(ret) : 0; for (k = 0; k < 2; k++) { for (i = (k==0 ? rr : 0); i < (k==0 ? ret : rr); i++) { /* io_loop_handle_add() may cause events array reallocation, so we have use array_idx() */ event = array_idx(&ctx->events, i); list = event->data.ptr; for (j = 0; j < IOLOOP_IOLIST_IOS_PER_FD; j++) { io = list->ios[j]; if (io == NULL) continue; call = FALSE; if ((event->events & (EPOLLHUP | EPOLLERR)) != 0) call = TRUE; else if ((io->io.condition & IO_READ) != 0) call = (event->events & EPOLLIN) != 0; else if ((io->io.condition & IO_WRITE) != 0) call = (event->events & EPOLLOUT) != 0; else if ((io->io.condition & IO_ERROR) != 0) call = (event->events & IO_EPOLL_ERROR) != 0; if (call) { io_loop_call_io(&io->io); if (!ioloop->running) return; } } } } } Thanks a lot. Achim https://www.tallence.com Folgt uns auf LinkedIn <https://www.linkedin.com/company/tallence-ag> // XING <https://www.xing.com/pages/tallenceag> // Twitter <https://twitter.com/tallence> // Instagram <https://www.instagram.com/tallence_ag/> // facebook <http://www.facebook.com/Tallence> Tallence AG // Sitz der Gesellschaft: Hamburg // Neue Gröningerstraße 13, 20457 Hamburg // Amtsgericht Hamburg HRB 142900 Vorstand: Frank Moll (Vorsitzender), Bernd Scherf // Aufsichtsrat: Wolf Ingomar Faecks (Vorsitzender) Die Speicherung und Verarbeitung personenbezogener Daten erfolgt entsprechend unserer Datenschutzhinweise. <https://www.tallence.com/datenschutzhinweise>

2 2

"Connection reset by peer" errors with Outlook
by Steve Dondley 23 Jan '24

23 Jan '24

I have a mail server using dovecot that has been running without issue for quite a couple of years now. It serves email for about 30 individuals. But since Jan 14th, users have been reporting spurious errors in MS Outlook: 316 Jan 21 00:38:12 ip-172-30-0-131 dovecot: pop3-login: Disconnected (no auth attempts in 1 secs): user=<>, rip=118.xxx.xxx.xxx, lip=172.30.0.131, TLS handshaking: read(size=783) failed: Connection reset by peer, session=<yVd4Hm4Pst12wSuN> 317 Jan 21 00:38:12 ip-172-30-0-131 dovecot: pop3-login: Disconnected (no auth attempts in 0 secs): user=<>, rip=118.xxx.xxx.xxx, lip=172.30.0.131, TLS handshaking: read(size=598) failed: Connection reset by peer, session=<aKOAHm4PCOB2wSuN> 318 Jan 21 00:38:13 ip-172-30-0-131 dovecot: pop3-login: Disconnected (no auth attempts in 0 secs): user=<>, rip=118.xxx.xxx.xxx, lip=172.30.0.131, TLS handshaking: read(size=598) failed: Connection reset by peer, session=<9rWIHm4PtuF2wSuN> 319 Jan 21 00:38:13 ip-172-30-0-131 dovecot: pop3-login: Disconnected (no auth attempts in 0 secs): user=<>, rip=118.xxx.xxx.xxx, lip=172.30.0.131, TLS handshaking: read(size=677) failed: Connection reset by peer, session=<NsORHm4P9OJ2wSuN> 320 Jan 21 00:38:14 ip-172-30-0-131 dovecot: pop3-login: Disconnected (no auth attempts in 0 secs): user=<>, rip=118.xxx.xxx.xxx, lip=172.30.0.131, TLS handshaking: read(size=691) failed: Connection reset by peer, session=<AACaHm4PdOR2wSuN> 321 Jan 21 00:38:15 ip-172-30-0-131 dovecot: pop3-login: Disconnected (no auth attempts in 1 secs): user=<>, rip=118.xxx.xxx.xxx, lip=172.30.0.131, TLS handshaking: read(size=610) failed: Connection reset by peer, session=<G8umHm4P2OV2wSuN> 322 Jan 21 00:38:16 ip-172-30-0-131 dovecot: pop3-login: Disconnected (no auth attempts in 1 secs): user=<>, rip=118.xxx.xxx.xxx, lip=172.30.0.131, TLS handshaking: read(size=609) failed: Connection reset by peer, session=<qSy0Hm4PuOd2wSuN> 323 Jan 21 00:38:16 ip-172-30-0-131 dovecot: pop3-login: Disconnected (no auth attempts in 0 secs): user=<>, rip=118.xxx.xxx.xxx, lip=172.30.0.131, TLS handshaking: read(size=596) failed: Connection reset by peer, session=<W427Hm4PtOl2wSuN> 324 Jan 21 00:38:17 ip-172-30-0-131 dovecot: pop3-login: Disconnected (no auth attempts in 0 secs): user=<>, rip=118.xxx.xxx.xxx, lip=172.30.0.131, TLS handshaking: read(size=596) failed: Connection reset by peer, session=<mu/JHm4Ptup2wSuN> Some characteristics of the problem that may offer a clue: * happening with multiple users, not just the same one * happens from different IP addresses. * happens about 3 to 5 times per day and the errors come in batches like above * MS Outlook error is: reported error (0x80042109): ‘Outlook cannot conect to your outgoing SMTP email server. If you continue to receive this message….blah blah blah I googled the error code but didn’t find anything particularly helpful. I’m running Debian bullseye, version 11.8.

4 7

Migrate Dovecot 2.0.16 (mbox) to Dovecot 2.3.16 (MaiDir) and preserve POP UIDs
by Barbara M. 21 Jan '24

21 Jan '24

Already done a first migration using imapsync Good result, but there is the POP3 UIDs problem. Searching online give a Tried to understand the instructions on: https://doc.dovecot.org/settings/plugin/pop3-migration-plugin/? with limited comprension results (the link in the page is to the old wiki). Searching online give more confusion ... I am obviouly interested to resync the INBOX with somethig that give to clients the old UIDs so they don't re-download all messages in the inbox as duplicates into their mailbox. I suppose I can do: doveadm -v expunge -u <username> mailbox INBOX all rm dovecot* in the Maildir folder doveadm force-resync -u <username> INBOX then use dsync to migrate the INBOX Here I need some hints to how setup it and wich syntax use. If useful I can copy or mount the /var/mail/ folder of the old server that contains the users INBOX to the new server. Thanks, B.

2 1

Re: Migrate Dovecot 2.0.16 (mbox) to Dovecot 2.3.16 (MaiDir) and preserve POP UIDs
by Joseph Tam 21 Jan '24

21 Jan '24

From: "Barbara M." <barbara(a)rfx.it> > I am obviouly interested to resync the INBOX with somethig that give to > clients the old UIDs so they don't re-download all messages in the inbox > as duplicates into their mailbox. When I mitigated away from qpopper, I configured protocol pop3 { ... pop3_reuse_xuidl = yes } Maybe that's of use to you? Joseph Tam <jtam.home(a)gmail.com>

1 0

Uncompress compressed messages in Maildir mailbox?
by achekalin＠lazurit.com 21 Jan '24

21 Jan '24

Some time ago I enabled compression on incoming messages, so LMTP delivered messages were compressed. Good idea in terms of disk space, but now I cannot uncompress any of these messages even when I need to! I was using this setting: plugins { zlib_save = lz4 } and now I can see this string at the beginning of each message file - "Dovecot-LZ4", so no other software can uncompress them for me. Please advise, how can I uncompress message file in Maildir mailbox when I need to access its contents directly?

4 5

master-users problem
by Barbara M. 20 Jan '24

20 Jan '24

I am trying to activate master-users as usual but seems in this case I am doing something wrong and I can't have it working. It is a Rocky Linux 9.x (in Proxmox CT), installed with virtualmin and using system users: # doveconf -n # 2.3.16 (7e2e900c1a): /etc/dovecot/dovecot.conf # OS: Linux 6.5.11-4-pve x86_64 Rocky Linux release 9.3 (Blue Onyx) auth_master_user_separator = * auth_mechanisms = plain login disable_plaintext_auth = no first_valid_uid = 1000 mail_location = maildir:~/Maildir mbox_write_locks = fcntl namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { args = /etc/dovecot/master-users driver = passwd-file master = yes result_success = continue } passdb { driver = pam } protocols = imap pop3 ssl = required ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_cipher_list = PROFILE=SYSTEM ssl_key = # hidden, use -P to show it userdb { driver = passwd } Any hints on what I am doing wrong and/or how to debug it? Thanks, B.

3 4

Forcing imap authentication failure for certain IP addresses
by Hippo Man 20 Jan '24

20 Jan '24

I'm running dovecot 2.3.18 under Debian 11. I want to do something that's a bit unusual: when IMAP connections are attempted from a few specific IP addresses, I want to force an IMAP authentication failure from those connections, no matter what user ID and password are specified. I know that I can use iptables to completely block imap access from those IP addresses to the IMAP ports. However, in these specific cases, I'd prefer that the connection goes through to dovecot, but for dovecot then to always generate authentication failures for those specific connections ... even if a valid user ID and password happen to be specified. Is there a way to do this in dovecot? Thank you very much in advance. -- hippoman(a)gmail.com Take a hippopotamus to lunch today. .---------, 0__0 / ( oo'---, / oo\ ,\ | | \ ,=__/ \ / / /------| /| |__|-' |__|'

2 1

Documentation flaw: man-page link.
by Ralph Corderoy 19 Jan '24

19 Jan '24

Hi, https://doc.dovecot.org/admin_manual/doveadm_mailbox_commands/ ends with The man-pages also contain good descriptions of doveadm commands. Man-pages can be accessed online at e.g. https://wiki.dovecot.org/Tools/Doveadm That wiki page says Our primary documentation is now at https://doc.dovecot.org, please update your links. But I was at https://doc.dovecot.org to start with and there is no obvious mention of man pages there. This needs tidying up to avoid the loop and ideally provide man pages. -- Cheers, Ralph.

3 3

post-login scripting
by Alex 19 Jan '24

19 Jan '24

Hi, I'm trying to determine the last login time for my IMAP users. Some systems use mbox while others are Maildir, but not sure that matters. I'd just like to touch a file similar to how it's done in this article, but it doesn't work for me. https://doc.dovecot.org/admin_manual/post_login_scripting/ I've followed the instructions explicitly - made the required changes to 10-master.conf and created a shell script in /usr/local/bin that touches a file in the user's home directory. However, the file doesn't get created/touched. I've enabled debugging and don't see any errors that might lead to what I'm doing wrong. It doesn't say explicitly in the article that the last-login script referenced in the article is actually the contents of the postlogin.sh script, but I'm assuming it is? When I put the following in my dovecot.conf instead of conf.d/10-auth.conf, it core dumps. I thought local changes should be made in dovecot.conf? service imap-login { executable = imap imap-postlogin inet_listener imap { port = 0 } inet_listener imaps { port = 993 } process_min_avail = 6 service_count = 0 vsz_limit = 512 M } service imap-postlogin { executable = script-login /usr/local/bin/postlogin.sh user = $default_internal_user } service pop3-login { inet_listener pop3 { port = 0 } inet_listener pop3s { port = 995 } } Hi, I'm trying to determine the last login time for my IMAP users. Some systems use mbox while others are Maildir, but not sure that matters. I'd just like to touch a file similar to how it's done in this article, but it doesn't work for me. https://doc.dovecot.org/admin_manual/post_login_scripting/ I've followed the instructions explicitly - made the required changes to 10- master.conf and created a shell script in /usr/local/bin that touches a file in the user's home directory. However, the file doesn't get created/touched. I've enabled debugging and don't see any errors that might lead to what I'm doing wrong. It doesn't say explicitly in the article that the last-login script referenced in the article is actually the contents of the postlogin.sh script, but I'm assuming it is? When I put the following in my dovecot.conf instead of conf.d/10-auth.conf, it core dumps. I thought local changes should be made in dovecot.conf? service imap-login { executable = imap imap-postlogin inet_listener imap { port = 0 } inet_listener imaps { port = 993 } process_min_avail = 6 service_count = 0 vsz_limit = 512 M } service imap-postlogin { executable = script-login /usr/local/bin/postlogin.sh user = $default_internal_user } service pop3-login { inet_listener pop3 { port = 0 } inet_listener pop3s { port = 995 } }

4 7

Re: What is the difference between BEFORE, SENTBEFORE, and SAVEDBEFORE?
by Joseph Tam 19 Jan '24

19 Jan '24

From: Paul Pace <paul(a)mostlybsd.com> > BEFORE date specification > Matches messages with an internal date before date > specification. > > SENTBEFORE date specification > Matches messages with a Date: header before date specification. > > SAVEDBEFORE date specification > Matches messages, which were saved before date specification. > > I am creating a cron job to purge old messages in Trash or Spam folders, > but I discovered using doveadm search queries using savedbefore that > somehow no message in any of the folders shows up with queries starting > at 5d, even though there are much older messages. I don't know exactly the answer to your query, but the semantics of each term may not be the problem. I had this exact problem a decade ago with my own trash purging script. If you dump the above values e.g. doveadm fetch -ftab -A 'mailbox date.received' mailbox Trash BEFORE 90d you may find that many of them have the same value, and what's more, the time coincides with the first time you queried for that value (i.e. when you ran the above doveadm fetch). I think these fields may not have cached values before you ask for it, then it gets instantiated the current timestamp when you do. If you do a fetch every day, you'll eventually reach 90d, and it will work forever more (+/- 1 day). Perhaps adding those fields into these settings is a more direct and better solution: https://doc.dovecot.org/configuration_manual/mail_cache_settings/ Joseph Tam <jtam.home(a)gmail.com>

1 1

What is the difference between BEFORE, SENTBEFORE, and SAVEDBEFORE?
by Paul Pace 19 Jan '24

19 Jan '24

In doveadm-search-query(7), it states: BEFORE date specification Matches messages with an internal date before date specification. SENTBEFORE date specification Matches messages with a Date: header before date specification. SAVEDBEFORE date specification Matches messages, which were saved before date specification. I am creating a cron job to purge old messages in Trash or Spam folders, but I discovered using doveadm search queries using savedbefore that somehow no message in any of the folders shows up with queries starting at 5d, even though there are much older messages. doveadm search mailbox Trash before 90d -A | wc -l 277 doveadm search mailbox Trash sentbefore 90d -A | wc -l 277 doveadm search mailbox Trash savedbefore 90d -A | wc -l 0 For my purpose, I'm not clear on the differences between the different queries and am wondering what will be the better option. Thank you, Paul

1 0

testing sieve/pigeonhole, auth errors
by Joe Acquisto 18 Jan '24

18 Jan '24

A small SOHO system, of installed perhaps a year. Seems to be working and wished to add pigeonhole/sieve. Per Pigeonhole/sieve troubleshooting in the docs, set on mail_debug = yes and this is what I see, upon launching Thunderbird as the client. Thought that "unknown user" and "permission denied" deserved attention before any other steps. Just the dialog for one user is pasted below. pid 475 is dovecot,vmail for dovecot imapd This is what I see for /proc/self/io blah #ll /proc/self/io -r-------- 1 root root 0 Jan 15 15:10 /proc/self/io Jan 15 14:53:35 auth-worker(22903): Info: conn unix:auth-worker (pid=22897,uid=475): auth-worker<1>: pam(me(a)here.com,192.168.11.166,<RbZgXgEPUKbAqAum>): unknown user Jan 15 14:53:35 auth-worker(22901): Info: conn unix:auth-worker (pid=22897,uid=475): auth-worker<4>: passwd(me(a)here.com,192.168.11.166,<RbZgXgEPUKbAqAum>): unknown user Jan 15 14:53:35 imap-login: Info: Login: user=<me(a)here.com>, method=PLAIN, rip=192.168.11.166, lip=192.168.0.225, mpid=22907, session=<RbZgXgEPUKbAqAum> Jan 15 14:53:35 imap(me(a)here.com)<22907><RbZgXgEPUKbAqAum>: Debug: Effective uid=100, gid=1000, home=/home/vmail/me(a)here.com Jan 15 14:53:35 imap(me(a)here.com)<22907><RbZgXgEPUKbAqAum>: Debug: open(/proc/self/io) failed: Permission denied Jan 15 14:53:35 imap(me(a)here.com)<22907><RbZgXgEPUKbAqAum>: Debug: Namespace inbox: type=private, prefix=, sep=, inbox=yes, hidden=no, list=yes, subscriptions=yes location=maildir:~/ Maildir Jan 15 14:53:35 imap(me(a)here.com)<22907><RbZgXgEPUKbAqAum>: Debug: maildir++: root=/home/vmail/me(a)here.com/Maildir, index=, indexpvt=, control=, inbox=/home/vmail/joea@j4com puters.com/Maildir, alt= Jan 15 14:53:35 auth-worker(22904): Info: conn unix:auth-worker (pid=22897,uid=475): auth-worker<1>: pam(me(a)here.com,192.168.11.166,<d7VgXgEPTqbAqAum>): unknown user Jan 15 14:53:35 auth-worker(22901): Info: conn unix:auth-worker (pid=22897,uid=475): auth-worker<5>: passwd(me(a)here.com,192.168.11.166,<d7VgXgEPTqbAqAum>): unknown user Jan 15 14:53:35 imap-login: Info: Login: user=<me(a)here.com>, method=PLAIN, rip=192.168.11.166, lip=192.168.0.225, mpid=22908, session=<d7VgXgEPTqbAqAum> Jan 15 14:53:35 imap(me(a)here.com)<22908><d7VgXgEPTqbAqAum>: Debug: Effective uid=100, gid=1000, home=/home/vmail/me(a)here.com Jan 15 14:53:35 imap(me(a)here.com)<22908><d7VgXgEPTqbAqAum>: Debug: open(/proc/self/io) failed: Permission denied Jan 15 14:53:35 imap(me(a)here.com)<22908><d7VgXgEPTqbAqAum>: Debug: Namespace inbox: type=private, prefix=, sep=, inbox=yes, hidden=no, list=yes, subscriptions=yes location=maildir:~/ Maildir Jan 15 14:53:35 imap(me(a)here.com)<22908><d7VgXgEPTqbAqAum>: Debug: maildir++: root=/home/vmail/me(a)here.com/Maildir, index=, indexpvt=, control=, inbox=/home/vmail/joea@j4com puters.com/Maildir, alt= Jan 15 14:53:36 imap(joea(a)acquisto-us.com)<22906><fwJdXgEPQKbAqAum>: Debug: Mailbox INBOX: Mailbox opened Jan 15 14:53:36 imap(me(a)here.com)<22907><RbZgXgEPUKbAqAum>: Debug: Mailbox INBOX: Mailbox opened Jan 15 14:53:37 imap(joea(a)acquisto-us.com)<22906><fwJdXgEPQKbAqAum>: Debug: Mailbox INBOX: UID 13710: Opened mail because: prefetch A small SOHO system, of installed perhaps a year. Seems to be working and wished to add pigeonhole/sieve. Per Pigeonhole/sieve troubleshooting in the docs, set on mail_debug = yes and this is what I see, upon launching Thunderbird as the client. Thought that "unknown user" and "permission denied" deserved attention before any other steps. Just the dialog for one user is pasted below. pid 475 is dovecot,vmail for dovecot imapd This is what I see for /proc/self/io blah # ll /proc/self/io -r-------- 1 root root 0 Jan 15 15:10 /proc/self/io Jan 15 14:53:35 auth-worker(22903): Info: conn unix:auth-worker (pid=22897,uid=475): auth-worker<1>: pam (me(a)here.com,192.168.11.166,<RbZgXgEPUKbAqAum>): unknown user Jan 15 14:53:35 auth-worker(22901): Info: conn unix:auth-worker (pid=22897,uid=475): auth-worker<4>: passwd (me(a)here.com,192.168.11.166,<RbZgXgEPUKbAqAum>): unknown user Jan 15 14:53:35 imap-login: Info: Login: user=<me(a)here.com>, method=PLAIN, rip=192.168.11.166, lip=192.168.0.225, mpid=22907, session=<RbZgXgEPUKbAqAum> Jan 15 14:53:35 imap(me(a)here.com)<22907><RbZgXgEPUKbAqAum>: Debug: Effective uid=100, gid=1000, home=/home/vmail/me(a)here.com Jan 15 14:53:35 imap(me(a)here.com)<22907><RbZgXgEPUKbAqAum>: Debug: open(/proc/ self/io) failed: Permission denied Jan 15 14:53:35 imap(me(a)here.com)<22907><RbZgXgEPUKbAqAum>: Debug: Namespace inbox: type=private, prefix=, sep=, inbox=yes, hidden=no, list=yes, subscriptions=yes location=maildir:~/ Maildir Jan 15 14:53:35 imap(me(a)here.com)<22907><RbZgXgEPUKbAqAum>: Debug: maildir++: root=/home/vmail/me(a)here.com/Maildir, index=, indexpvt=, control=, inbox=/home/ vmail/joea@j4com puters.com/Maildir, alt= Jan 15 14:53:35 auth-worker(22904): Info: conn unix:auth-worker (pid=22897,uid=475): auth-worker<1>: pam (me(a)here.com,192.168.11.166,<d7VgXgEPTqbAqAum>): unknown user Jan 15 14:53:35 auth-worker(22901): Info: conn unix:auth-worker (pid=22897,uid=475): auth-worker<5>: passwd (me(a)here.com,192.168.11.166,<d7VgXgEPTqbAqAum>): unknown user Jan 15 14:53:35 imap-login: Info: Login: user=<me(a)here.com>, method=PLAIN, rip=192.168.11.166, lip=192.168.0.225, mpid=22908, session=<d7VgXgEPTqbAqAum> Jan 15 14:53:35 imap(me(a)here.com)<22908><d7VgXgEPTqbAqAum>: Debug: Effective uid=100, gid=1000, home=/home/vmail/me(a)here.com Jan 15 14:53:35 imap(me(a)here.com)<22908><d7VgXgEPTqbAqAum>: Debug: open(/proc/ self/io) failed: Permission denied Jan 15 14:53:35 imap(me(a)here.com)<22908><d7VgXgEPTqbAqAum>: Debug: Namespace inbox: type=private, prefix=, sep=, inbox=yes, hidden=no, list=yes, subscriptions=yes location=maildir:~/ Maildir Jan 15 14:53:35 imap(me(a)here.com)<22908><d7VgXgEPTqbAqAum>: Debug: maildir++: root=/home/vmail/me(a)here.com/Maildir, index=, indexpvt=, control=, inbox=/home/ vmail/joea@j4com puters.com/Maildir, alt= Jan 15 14:53:36 imap(joea(a)acquisto-us.com)<22906><fwJdXgEPQKbAqAum>: Debug: Mailbox INBOX: Mailbox opened Jan 15 14:53:36 imap(me(a)here.com)<22907><RbZgXgEPUKbAqAum>: Debug: Mailbox INBOX: Mailbox opened Jan 15 14:53:37 imap(joea(a)acquisto-us.com)<22906><fwJdXgEPQKbAqAum>: Debug: Mailbox INBOX: UID 13710: Opened mail because: prefetch

3 4

Re: [EXT] Re: Dovecot imap-hibernate errors in 2.3.21
by Aki Tuomi 18 Jan '24

18 Jan '24

Can you send `doveconf -n`? I think it might be related to the separete user accounts somehow. Aki > On 18/01/2024 09:45 EET Lucas Rolff <lucas(a)lucasrolff.com> wrote: > > > SELinux runs in permissive mode on the system (so doesn't take action, and no violations are logged either), the OS specifically is Oracle Linux 8.9, the only main thing that differs from RHEL or eg rocky/almalinux is I use the newer oracle kernel they release, but shouldn't have any effect > > > The only "special" thing being that mail users are isolated on their own Linux user (a domain will result in a local Linux user being created), but that's about it. > There's nothing with eg virtualized file systems or anything like that, that would result in per user mount points as well > > > Sent from Outlook for iOS (https://aka.ms/o0ukef) > ------------------------------ > From: Aki Tuomi <aki.tuomi(a)open-xchange.com> > Sent: Thursday, January 18, 2024 8:37:07 AM > To: Lucas Rolff <lucas(a)lucasrolff.com>; dovecot(a)dovecot.org <dovecot(a)dovecot.org> > Subject: Re: Dovecot imap-hibernate errors in 2.3.21 > Did you check if maybe selinux is interfering here? I tested the 2.3.21-CE in a RHEL7 VM and hibernation seems to work there. > > Aki > > > On 17/01/2024 22:51 EET lucas(a)lucasrolff.com wrote: > > > > > > Thanks for your reply Aki! > > > > It doesn't seem to contain much more information sadly that points towards anything related to hibernate itself. > > "Debug: open(/proc/self/io) failed: Permission denied" being the main "thing" that seems a bit odd, but that also happens under 2.3.20 as well by the looks of it: > > > > ``` > > Jan 17 20:42:16 de-mail01 dovecot[3631433]: imap-login: Login: user=<customer(a)example.com>, method=PLAIN, rip=193.36.xx.xx, lip=176.9.151.xxx, mpid=3631534, TLS, session=<JVYMV8gOq5vBJIOe> > > Jan 17 20:42:16 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: Loading modules from directory: /usr/lib64/dovecot > > Jan 17 20:42:16 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: Module loaded: /usr/lib64/dovecot/lib10_quota_plugin.so > > Jan 17 20:42:16 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: Module loaded: /usr/lib64/dovecot/lib11_imap_quota_plugin.so > > Jan 17 20:42:16 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: Module loaded: /usr/lib64/dovecot/lib20_fts_plugin.so > > Jan 17 20:42:16 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: Module loaded: /usr/lib64/dovecot/lib20_quota_clone_plugin.so > > Jan 17 20:42:16 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: Module loaded: /usr/lib64/dovecot/lib20_zlib_plugin.so > > Jan 17 20:42:16 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: Module loaded: /usr/lib64/dovecot/lib21_fts_solr_plugin.so > > Jan 17 20:42:16 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: Added userdb setting: mail=mdbox:~/mail/example.com/customer/ > > Jan 17 20:42:16 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: Added userdb setting: plugin/quota_rule=*:bytes=10240M > > Jan 17 20:42:16 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: Effective uid=1098, gid=1098, home=/home/username/ > > Jan 17 20:42:16 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: Quota root: name=User quota backend=count args= > > Jan 17 20:42:16 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: Quota rule: root=User quota mailbox=* bytes=10737418240 messages=0 > > Jan 17 20:42:16 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: Quota grace: root=User quota bytes=1073741824 (10%) > > Jan 17 20:42:16 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: dict(proxy): dict created (uri=proxy::sqlquota, base_dir=/run/dovecot) > > Jan 17 20:42:16 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: open(/proc/self/io) failed: Permission denied > > Jan 17 20:42:16 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: Namespace inbox: type=private, prefix=, sep=, inbox=yes, hidden=no, list=yes, subscriptions=yes location=mdbox:~/mail/example.com/customer/ > > Jan 17 20:42:16 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: fs: root=/home/username//mail/example.com/customer, index=, indexpvt=, control=, inbox=, alt= > > Jan 17 20:42:16 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: quota: quota_over_flag check: quota_over_script unset - skipping > > Jan 17 20:42:17 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: Mailbox INBOX: Mailbox opened > > Jan 17 20:42:17 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: Mailbox INBOX: Mailbox opened > > Jan 17 20:42:49 de-mail01 dovecot[3631433]: imap-hibernate: Error: conn unix:imap-hibernate (pid=3631534,uid=1098): IMAP client fd not received > > Jan 17 20:42:49 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Error: Couldn't hibernate imap client: /run/dovecot/imap-hibernate disconnected > > Jan 17 20:43:16 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: Mailbox INBOX: Mailbox opened > > Jan 17 20:43:49 de-mail01 dovecot[3631433]: imap-hibernate: Error: conn unix:imap-hibernate (pid=3631534,uid=1098): IMAP client fd not received > > Jan 17 20:43:49 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Error: Couldn't hibernate imap client: /run/dovecot/imap-hibernate disconnected > > Jan 17 20:44:16 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: Mailbox INBOX: Mailbox opened > > Jan 17 20:44:49 de-mail01 dovecot[3631433]: imap-hibernate: Error: conn unix:imap-hibernate (pid=3631534,uid=1098): IMAP client fd not received > > Jan 17 20:44:49 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Error: Couldn't hibernate imap client: /run/dovecot/imap-hibernate disconnected > > Jan 17 20:45:16 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: Mailbox INBOX: Mailbox opened > > Jan 17 20:45:49 de-mail01 dovecot[3631433]: imap-hibernate: Error: conn unix:imap-hibernate (pid=3631534,uid=1098): IMAP client fd not received > > Jan 17 20:45:49 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Error: Couldn't hibernate imap client: /run/dovecot/imap-hibernate disconnected > > Jan 17 20:46:16 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: Mailbox INBOX: Mailbox opened > > Jan 17 20:46:49 de-mail01 dovecot[3631433]: imap-hibernate: Error: conn unix:imap-hibernate (pid=3631534,uid=1098): IMAP client fd not received > > Jan 17 20:46:49 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Error: Couldn't hibernate imap client: /run/dovecot/imap-hibernate disconnected > > ``` > > > > Best Regards, > > Lucas Rolff > > _______________________________________________ > > dovecot mailing list -- dovecot(a)dovecot.org > > To unsubscribe send an email to dovecot-leave(a)dovecot.org >

1 0

Dovecot imap-hibernate errors in 2.3.21
by lucas＠lucasrolff.com 18 Jan '24

18 Jan '24

Hello, I recently upgraded a Dovecot install from 2.3.20 to 2.3.21 from the 2.3-latest repository ( http://repo.dovecot.org/ce-2.3-latest/rhel/$releasever/RPMS/$basearch ) However since then, I seem to be getting: Jan 13 01:08:32 mail01 dovecot[3646235]: imap-login: Login: user=<user(a)example.com>, method=PLAIN, rip=35.243.xxx.xxx, lip=176.9.xxx.xxx, mpid=3646265, TLS, session=<o9jJlMgOFzMj86dT> Jan 13 01:09:03 mail01 dovecot[3646235]: imap-hibernate: Error: conn unix:imap-hibernate (pid=3646265,uid=1010): IMAP client fd not received Jan 13 01:09:03 mail01 dovecot[3646235]: imap(user(a)example.com)<3646265><o9jJlMgOFzMj86dT>: Error: Couldn't hibernate imap client: /run/dovecot/imap-hibernate disconnected This seems to be the case for every email-account on the system. Related configs: 20-imap.conf: protocol imap { imap_hibernate_timeout = 30s imap_idle_notify_interval = 24 mins mail_plugins = $mail_plugins imap_quota quota_clone zlib fts fts_solr mail_max_userip_connections = 20 } 10-master.conf: service imap { # Most of the memory goes to mmap()ing files. You may need to increase this # limit if you have huge mailboxes. #vsz_limit = $default_vsz_limit unix_listener imap-master { user = $default_internal_user } extra_groups = $default_internal_group } service imap-hibernate { unix_listener imap-hibernate { mode = 0660 group = $default_internal_group } } 10-metrics.conf event_exporter log { format = json format_args = time-rfc3339 transport = log } metric hibernation_logging { exporter = log filter = event=imap_client_hibernated OR event=imap_client_unhibernated } socket: $ stat /run/dovecot/imap-hibernate File: /run/dovecot/imap-hibernate Size: 0 Blocks: 0 IO Block: 4096 socket Device: 19h/25d Inode: 48551407 Links: 1 Access: (0660/srw-rw----) Uid: ( 0/ root) Gid: ( 97/ dovecot) Context: system_u:object_r:dovecot_var_run_t:s0 Access: 2024-01-13 01:03:07.432084831 +0100 Modify: 2024-01-13 00:50:56.394662577 +0100 Change: 2024-01-13 00:50:56.394662577 +0100 Birth: - From the change log, I see the following: - imap-hibernate: If an IMAP client unhibernation timed out with "(version received)", the unhibernation could still have successfully finished later on and continued working normally. This was rather confusing, because imap-hibernate already logged that the client got disconnected. Avoid this by forcing the connection to shutdown on unhibernation timeout. By the looks of it, it seems hibernation never actually happens anymore as of the new version. Downgrading to version 2.3.20 again seems to make hibernation function again based on the event logs. In 2.3.21 I only see events being logged for `imap_client_hibernated` which matches the /run/dovecot/imap-hibernate disconnected: "error":"/run/dovecot/imap-hibernate disconnected" In 2.3.20 I get both imap_client_hibernated and imap_client_unhibernated events (that it happens and when idle_done is triggered). Thank you in advance!

2 3

Re: Multiple user attributes in LDAP userdb query strings
by Oucheou Hassan 17 Jan '24

17 Jan '24

Merci Merci

1 0

recipient delimiter option in dovecot
by André Rodier 17 Jan '24

17 Jan '24

Hello, all. Postfix allows me to configure multiple characters to be used as recipient delimiter. However, I don't see that in dovecot, it seems I can only use one character in recipient_delimiter ? Am I right ? Does dovecot would only let me use email+box(a)domain.com, or can I use other forms, for instance email~box(a)domain.com and email&box(a)domain.com ? Thanks. André -- 𝓐𝓡 - 𝐴𝑛𝑑𝑟𝑒 𝑅𝑜𝑑𝑖𝑒𝑟

2 1

Virtual folder with custom flags
by Kirill Korinsky 15 Jan '24

15 Jan '24

Greetings, I can't figure out how doesn it possible to create a virtual folder which contains mails which has falgs: \Flagged or any customers flag. For example I do have a test mail: mx2$ doas doveadm fetch -u kirill(a)korins.ky "mailbox flags" mailbox-guid fb9e821c7b778b658896000079e31c01 uid 67096 mailbox: Archive flags: \Flagged \Seen $NotJunk NotJunk $MailFlagBit0 $MailFlagBit2 Invoice mx2$ and virtual folder: mx2$ cat /etc/dovecot/virtual/Flagged/dovecot-virtual * -INBOX/Trash -INBOX/Trash/* -INBOX/Junk -INBOX/Junk/* flagged mx2$ If I unset flag \Flagged from that mail, it dissapear from the folder. So, how should I change definition to keep it here if it has user's specified flags like Invoice or ASAP or whatsoever? -- wbr, Kirill

2 1

Quota clone plugin - initial population of data
by John Fawcett 15 Jan '24

15 Jan '24

Hi while responding on a previous thread, I noticed in the documentation: https://doc.dovecot.org/configuration_manual/quota_clone_plugin/ "For example you might want to access everybody’s quota via Redis ... but you don’t store the Redis database permanently so it could become empty once in a while. " It aslo seems that the quota clone plugin propagates only quota changes. Putting both of these points together, you'll going to have missing quotas in redis if it is restarted. It will gradually get populated but only on basis of mailbox changes. Maybe there should be an initial load of all the quotas when dovecot starts, or could that be a performance issue? Maybe even doveadm quota recalc should propagate or contain an option to propage quotas so that even if it can't be done on dovecot startup, at least it can be done on demand by the administrator. John

1 0

ARM support
by Brad Koehn 15 Jan '24

15 Jan '24

Hey there, I was wondering if you’re planning to support ARM in your packages and/or Docker images. Right now I’m stuck on whatever ships with Debian for ARM64 architectures. Otherwise, suggestions how would I go about building them myself? In a modern build world, it’s fairly straightforward, especially with Docker to handle all the emulation. Thanks for such a great product! I’ve used Dovecot on my little server for over twenty years. — Brad Koehn Hey there, I was wondering if you’re planning to support ARM in your packages and/or Docker images. Right now I’m stuck on whatever ships with Debian for ARM64 architectures. Otherwise, suggestions how would I go about building them myself? In a modern build world, it’s fairly straightforward, especially with Docker to handle all the emulation. Thanks for such a great product! I’ve used Dovecot on my little server for over twenty years. — Brad Koehn

8 15

Custom map for quota
by Matt 15 Jan '24

15 Jan '24

Hi, I'm trying to setup quota with the following layout CREATE TABLE "domain" ( "id" INTEGER, "name" TEXT, "active" INTEGER DEFAULT 0, PRIMARY KEY("id"), UNIQUE("name") ) CREATE TABLE "address" ( "id" INTEGER, "localpart" TEXT NOT NULL, "domain_id" INTEGER NOT NULL, PRIMARY KEY("id"), UNIQUE("localpart","domain_id") ) CREATE TABLE "mailbox" ( "id" INTEGER, "address_id" INTEGER, "active" INTEGER DEFAULT 0, "password" TEXT, "quota_bytes" INTEGER DEFAULT 0, PRIMARY KEY("id") ) As I like to update the quota and I like to use a dict/map I'm not sure if I can update this following: map { pattern = priv/quota/storage table = maibox value_field = dummy fields { value_field = quota_bytes id = mailbox_id } mailbox_id will be queried using password_query using: "mailbox.id as mailbox_id" Using such map I hope to be able to use: SELECT quota_bytes FROM mailbox WHERE id = '$mailbox_id' INSERT INTO mailbox (quota_bytes) VALUES ('$value') ON DUPLICATE KEY UPDATE quota_bytes='$value' Can someone help me with this ? Hi, I'm trying to setup quota with the following layout CREATE TABLE "domain" ( "id" INTEGER, "name" TEXT, "active" INTEGER DEFAULT 0, PRIMARY KEY("id"), UNIQUE("name") ) CREATE TABLE "address" ( "id" INTEGER, "localpart" TEXT NOT NULL, "domain_id" INTEGER NOT NULL, PRIMARY KEY("id"), UNIQUE("localpart","domain_id") ) CREATE TABLE "mailbox" ( "id" INTEGER, "address_id" INTEGER, "active" INTEGER DEFAULT 0, "password" TEXT, "quota_bytes" INTEGER DEFAULT 0, PRIMARY KEY("id") ) As I like to update the quota and I like to use a dict/map I'm not sure if I can update this following: map { pattern = priv/quota/storage table = maibox value_field = dummy fields { value_field = quota_bytes id = mailbox_id } mailbox_id will be queried using password_query using: "mailbox.id as mailbox_id" Using such map I hope to be able to use: SELECT quota_bytes FROM mailbox WHERE id = '$mailbox_id' INSERT INTO mailbox (quota_bytes) VALUES ('$value') ON DUPLICATE KEY UPDATE quota_bytes='$value' Can someone help me with this ?

3 3

Panic: file index-search-result.c: line 132 (index_search_result_update_flags): assertion failed: (result->search_args->args == &search_arg)
by Markus Doits 14 Jan '24

14 Jan '24

Hello dovecot community, I hope you can help me with the following panic: --- Panic: file index-search-result.c: line 132 (index_search_result_update_flags): assertion failed: (result->search_args->args == &search_arg) Error: Raw backtrace: /usr/lib/dovecot/libdovecot.so.0(backtrace_append+0x46) [0x7f839a045846] -> /usr/lib/dovecot/libdovecot.so.0(backtrace_get+0x22) [0x7f839a045962] -> /usr/lib/dovecot/libdovecot.so.0(+0x10d81b) [0x7f839a05281b] -> /usr/lib/dovecot/libdovecot.so.0(+0x10d8b7) [0x7f839a0528b7] -> /usr/lib/dovecot/libdovecot.so.0(+0x5e2e2) [0x7f8399fa32e2] -> /usr/lib/dovecot/libdovecot-storage.so.0(+0x518a4) [0x7f839a1768a4] -> /usr/lib/dovecot/modules/lib20_virtual_plugin.so(virtual_storage_sync_init+0x274e) [0x7f8399ea4a9e] -> /usr/lib/dovecot/libdovecot-storage.so.0(mailbox_sync_init+0x5c) [0x7f839a192f9c] -> /usr/lib/dovecot/libdovecot-storage.so.0(mailbox_sync+0x39) [0x7f839a193039] -> /usr/lib/dovecot/libdovecot-storage.so.0(index_storage_get_status+0x37) [0x7f839a210467] -> /usr/lib/dovecot/modules/lib20_virtual_plugin.so(+0xc6c5) [0x7f8399e9f6c5] -> /usr/lib/dovecot/modules/lib20_fts_plugin.so(+0x145e2) [0x7f8399ee65e2] -> /usr/lib/dovecot/modules/lib01_acl_plugin.so(+0x10cb9) [0x7f8399f31cb9] -> /usr/lib/dovecot/libdovecot-storage.so.0(mailbox_get_status+0x64) [0x7f839a1935a4] -> dovecot/imap(imap_status_get+0x98) [0x55c63c180748] -> dovecot/imap(cmd_status+0x19e) [0x55c63c170a7e] -> dovecot/imap(command_exec+0xa4) [0x55c63c177444] -> dovecot/imap(+0x22392) [0x55c63c175392] -> dovecot/imap(+0x22444) [0x55c63c175444] -> dovecot/imap(client_handle_input+0x1bd) [0x55c63c17589d] -> dovecot/imap(client_input+0x74) [0x55c63c175e64] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_call_io+0x6d) [0x7f839a06903d] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run_internal+0x13a) [0x7f839a06a7aa] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0x54) [0x7f839a0690e4] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_run+0x40) [0x7f839a0692a0] -> /usr/lib/dovecot/libdovecot.so.0(master_service_run+0x17) [0x7f8399fd9ad7] -> dovecot/imap(main+0x570) [0x55c63c166d20] -> /lib/x86_64-linux-gnu/libc.so.6(+0x29d90) [0x7f8399c29d90] -> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0x80) [0x7f8399c29e40] -> dovecot/imap(_start+0x25) [0x55c63c166de5] Fatal: master: service(imap): child 793983 killed with signal 6 (core dumped) --- Happening on ubuntu 22.04, dovecot 2.3.21 from [this ubuntu ppa](https://launchpad.net/~patrickdk/+archive/ubuntu/production/+packages?… dovecot-core:amd64 1:2.3.21-0a~jammy dovecot-dev:amd64 1:2.3.21-0a~jammy dovecot-imapd:amd64 1:2.3.21-0a~jammy dovecot-ldap:amd64 1:2.3.21-0a~jammy dovecot-lmtpd:amd64 1:2.3.21-0a~jammy dovecot-sieve:amd64 1:2.3.21-0a~jammy dovecot-solr:amd64 1:2.3.21-0a~jammy --- I have this virtual mailbox configured: namespace { prefix = _/ separator = / location = virtual:~/Maildir/virtual:LAYOUT=maildir++:INDEX=~/Maildir/virtual } When I remove this mailbox, the error goes away - so it seems to be something with the virtual mailbox. As the fts provider I use [fts_flatcurve](https://slusarz.github.io/dovecot-fts-flatcurve), maybe this has something to do with it? Any help appreciated how to debug this further and maybe fix it. Thanks!

3 3