- dovecot - dovecot.org

06 Apr '15

I am trying to monitor with Nagios that my phones are consistently checking into dovecot via IMAP. I used to be able to parse syslog for imap-login messages. I have since updated my phones, the phoness email client (k9-mail) and dovecot. Now the imap-login messages are few and far between. However, I can clearly see via tcpdump that some traffic is happening when I click refresh on k9. I enabled "rawlog" support in dovecot, but it doesn't seem to write to disc frequently enough. 1) Does anyone have a better suggestion for how to monitor that my phone is checking in regularly? 2) Is there a flush-to-disk capability for rawlog in dovecot? 3) Also, when you have imap_zlib plugin enabled, the rawlog logs the raw compressed data instead of the decompressed IMAP commands. Is this an oversight? (FYI: k9 is calling SELECT "INBOX" on refresh) Thanks, G H

2 1

Question About Dovadm syntax
by Kenneth Ulrich 06 Apr '15

06 Apr '15

Hello All, I just have a quick question about doveadm commands. 1. Is there a command that we can use to count emails for a particular end user? 2. If an end user needed to copy/move emails from one account to another, is there a command? Also, I've searched Google results, numerous Ubuntu, CentOS, Fedora forums, Doveadm forums, and read the DoveCot/DoveADM man pages numerous times and either I am over looking, or I am not understanding. Thus why I am asking here.

2 1

speaking of sieve scripts... how to selectively not send vacation autoreply
by Harondel J. Sibble 04 Apr '15

04 Apr '15

Don't need to block anyone like in the "Re: Dovecot Oy merger with Open-Xchange AG" thread, but when I have my vacation recipie active, I'd like it to NOT reply to certain addresses. I tried the following, you can see the section with if header :contains "addressIdontwant(a)repliedtoo.tld" is commented out, once I'd added that section, no Vacation messages went out at all. Googling and reading the wiki and recipie suggestions doesn't make it clear how to exempt a list of addresses from ever receiving a vacation response. Suggestions on additional reading or solutions? require ["fileinto", "vacation"]; if header :comparator "i;ascii-casemap" :contains "Subject" "**SPAM**" { fileinto "Trash"; stop; } #if header :contains "addressIdontwant(a)repliedtoo.tld" { # stop; #} vacation # Reply at most once a day to a same sender :days 1 :subject "Changes to email addresses effective Jan 01/15" # List of recipient addresses which are included in the auto replying. # If a mail's recipient is not on this list, no vacation reply is sent for it. :addresses ["user(a)repliedtoo.tld"] This is on a Dovecot 1.x system that is slated for an upgrade soon. -- Harondel J. Sibble Sibble Computer Consulting Ltd. Creating Solutions for the small and medium business computer user. harondel(a)pdscc.com (use pgp keyid 0x3CC3CFCE not 0x3AD5C11D) http://www.pdscc.com Blog: http://www.pdscc.com/blog (604) 739-3709 (voice)

3 3

Dovecot Oy merger with Open-Xchange AG
by Timo Sirainen 03 Apr '15

03 Apr '15

Hi all, Today I can finally announce that Dovecot Oy company has merged with Open-Xchange AG. This helps us to get more Dovecot developers, support people and so on. Most importantly, eventually it should allow me to get back to doing what I like the most: Designing new and interesting stuff for Dovecot and perfecting the old stuff :) OX is a great match to Dovecot going forward. They also really like open source and share our plans for the future. Nothing big will change as a result of this merger: Dovecot will stay Dovecot with its own name and release schedules. We're not going to force OX and Dovecot to be the same product, other than having a somewhat deeper integration between them. Here are the press release links about it: http://www.dovecot.fi/open-xchange-and-dovecot-announce-merger-to-create-wo… http://www.open-xchange.com/dovecot http://www.open-xchange.com/announcements/18

16 32

EL6 EE package dependencies
by Will Yardley 03 Apr '15

03 Apr '15

I've been trying to upgrade Dovecot-ee package (on EL6/x86_64) from 2.2.15.8-1 to 2.2.16.2-1. It's complaining on these two dependencies: liblz4.so.1 libtextcat.so.0 These would both seem to be related to plugins, and don't seem to be required as package dependencies by the RPM from what I can see from the SRPM. Anyone know what packages I need to satisfy these dependencies?

3 5

Install process breaks its self by design
by Merlin at Desktop Masters 02 Apr '15

02 Apr '15

Greetings, I just tried to install Dovecot for the first time. It was on a virgin Ubuntu/Debian server (Version: 1:2.2.9-1ubuntu5) and the install failed. After a bit of struggling I worked out that the install fails BY DESIGN. Spoke about this with a few people and we decided it was best to report this issue and request that you redesign the packing so it does not fail. The reason it fails is as follows... When you install it asks you if you want to use self signed certificates. I have certificates so I said, "No". At the end of the install the script tries to start dovecot. It cannot because the service does not have certificates so it fails. This causes the script to abort and the other packages not to install and breaks the install process. I had to purge dovecot, then install it with the self signed certificates. So we have 2 issues here. 1. Why allow people to not install certificates if it is just going to break the install and confuse them. 2. Why are you starting the service right after install when dovecot clearly requires manual configuration as part of the setup. I recommend you resolve this by NOT starting the service as part of the install unless it is an upgrade and the service was already running. ~ Merlin

2 1

Re: Install process breaks its self by design
by Merlin at Desktop Masters 02 Apr '15

02 Apr '15

Correct Correct Correct And when I went to the page it lead me here. Whomever is making the .deb packages needs to be made aware of this. Can you please point me into a direction? ~ Merlin On 4/1/2015 4:33 PM, edgar(a)pettijohn-web.com wrote: > On 2015-03-29 13:58, Merlin at Desktop Masters wrote: >> Greetings, >> >> I just tried to install Dovecot for the first time. It was on a >> virgin Ubuntu/Debian server (Version: 1:2.2.9-1ubuntu5) and the >> install failed. After a bit of struggling I worked out that the >> install fails BY DESIGN. Spoke about this with a few people and we >> decided it was best to report this issue and request that you redesign >> the packing so it does not fail. The reason it fails is as follows... >> > > This would be on Debian/Ubuntu. > >> When you install it asks you if you want to use self signed >> certificates. I have certificates so I said, "No". At the end of the >> install the script tries to start dovecot. It cannot because the >> service does not have certificates so it fails. This causes the >> script to abort and the other packages not to install and breaks the >> install process. I had to purge dovecot, then install it with the >> self signed certificates. >> >> So we have 2 issues here. 1. Why allow people to not install >> certificates if it is just going to break the install and confuse >> them. > > This would be on Debian/Ubuntu. > > 2. Why are you starting the service right after install when >> dovecot clearly requires manual configuration as part of the setup. > > This would be on Debian/Ubuntu. > >> >> I recommend you resolve this by NOT starting the service as part of >> the install unless it is an upgrade and the service was already >> running. >> > > This would be on Debian/Ubuntu. > >> ~ Merlin >

3 3

Mismatch search user in ldap
by Jean-François Sénéchal 01 Apr '15

01 Apr '15

Hi I do not understand the right configuration I had a loop worries the users received the same message multiple times and testing other users config was not found so what is the right config to the following scheme My ldap scheme : mail: jf(a)marche.be gosaMailForwardingAddress: jf(a)citoyen.marche.be gosaMailAlternateAddress: toto(a)marche.be dovecot-ldap.conf.ext user_filter = (&(objectClass=posixAccount)(uid=%n)) virtual_mailbox_maps = proxy:ldap:/etc/postfix/ldap_virtual_recipients.cf virtual_alias_maps = proxy:ldap:/etc/postfix/ldap_virtual_recipients.cf ldap_virtual_recipients.cf : server_host = localhost search_base = ou=Users,ou=Citoyens,dc=marche,dc=be scope = sub bind = no version = 3 query_filter = (&(|(mail=%s)(gosaMailAlternateAddress=%s)(gosaMailForwardingAddress=%s)(uid=%s))(objectClass=gosaMailAccount)) result_attribute = uid is it correct ? thanks

1 0

multiple imap servers for high availability
by Robert Fantini 31 Mar '15

31 Mar '15

Hello, We run imap for our domain at our lan. I'd like to set up a backup mirror that has imap storage always duplicated. Then using something like heartbeat to share the imapd IP address . Could someone point me to documents , if any , that give ideas on how to set up the mirror? best regards, Rob

2 2

Migrating from Cyrus to Dovecot
by Miloslav Hůla 31 Mar '15

31 Mar '15

Hi, we are migrating from Cyrus 2.3.7 to Dovecot 2.2.13. We have ~7000 maildirs with ~500GB. Our goal is to do the migration without users have notice and with the shortest service downtime. The users use IMAP (with shared folders and ACL), POP3 and sieve filters. As a first choice, we tried the Dovecot's dsync tool. First tests were great, but we are not able to change the Cyrus auth backend for migration. Moreover, this migration seems too slow for us. As a second try, we tried the cyrus2dovecot migrating Perl scripts (and their derivates) from Wiki2. More or less they works but we found we need more control during the migration. So, as a third try, we wrote own migrating scripts. And thanks to the cyrus2dovecot it wasn't too much complicated. And there are my questions: A) Files and dirs timestamps The mtime of email file is important as an internal date as I found on Wiki2. But what about timestamps of cur/new/tmp directories or Dovecot's internal files line dovecot-uidlist? Do they play some role here? B) The 128 bit mailbox UID The Wiki2 speaks about 128 bit mailbox UID at first line of dovecot-uidlist. Cyrus preserves only 64 bit UID. Is this mailbox UID required by Dovecot? If so, can we use 0000000000000000501100008c4a11c1 (Cyrus UID padded by zeros)? C) Format of dovecot-uidlist records Wiki2 shows two examples: 25006 :1276528487.M364837P9451.kurkku,S=1355,W=1394:2, 25017 W2481 :1276533073.M242911P3632.kurkku:2,F Which format is preferred? Or what the benefits are? D) Converting between CRLF and LF If I understand correctly, Dovecot stores emails with LF only. We have all emails with CRLF now on Cyrus and converting them to LF only is a little more time consuming. Is there any benefit to do that? Or can we live with 'mail_save_crlf' without problems? E) POP3 backend I found many informations about IMAP internals but few on POP3 internals. What do I need to do POP3 migration transparent for user? Many thanks for any answers. Regards, Milo

2 2

quota setup assistance (postfix+dovecot+mysql)
by rooster 31 Mar '15

31 Mar '15

Hello list, I have been struggling with establishing a working installation of dovecot with mySQL quota support. I have not been able to find a guide or tutorial that works for the current revisions of software I have at my disposal. Most notably, the error I see in the mail log is as follows : Mar 23 00:55:31 host dovecot: lmtp(328): Debug: Module loaded: /usr/lib/dovecot/modules/lib10_quota_plugin.so Mar 23 00:55:31 host dovecot: lmtp(328): Error: dlopen(/usr/lib/dovecot/modules/lib11_imap_quota_plugin.so) failed: /usr/lib/dovecot/modules/lib11_imap_quota_plugin.so: undefined symbol: command_unregister Mar 23 00:55:31 host dovecot: lmtp(328): Fatal: Couldn't load required plugins I have attached my dovecot -n output. The installed revision of dovecot is 2.2.9 on ubuntu 14.04.02 LTS. Thank you in advance. --

4 21

sieve rule for "header don't exist"
by Reindl Harald 30 Mar '15

30 Mar '15

is there a way to expresse when the header "X-Spam-Status" *do not* exist move the message to a different folder? :contains, :matches and :is are not helpful here background: the spamass-milter option -B is lacking the spamassassin headers in case of milter-rejects and via sendmail generated BCC while flagged messages contain the headers - so it would be nice to move the rejected ones to a subfolder "REJECTED" instead into the inbox

2 2

Problem connecting to an imap account with Dovecot
by Laurent Rathle 29 Mar '15

29 Mar '15

Hello, I have several accounts on my server. I can’t connect to one of them using Apple mail on Mac or IOS to create my account or read my mail in these applications. I can send mails to this address and read them with my Horde webmail. I have these messages in the log : Mar 28 12:21:49 sd-41648 dovecot: imap-login: Login: user=<laurent(a)xxxxxx.fr>, method=PLAIN, rip=::1, lip=::1, mpid=13705, TLS, session=<vKWGdFcSXAAAAAAAAAAAAAAAAAAAAAAB> Mar 28 12:21:50 sd-41648 dovecot: service=imap, user=laurent(a)xxxxxx.fr, ip=[::1]. Disconnected: Logged out rcvd=26, sent=435 Mar 28 12:21:50 sd-41648 dovecot: imap-login: Login: user=<laurent(a)xxxxxx.fr>, method=PLAIN, rip=::1, lip=::1, mpid=13707, TLS, session=<Sw2LdFcSXgAAAAAAAAAAAAAAAAAAAAAB> Mar 28 12:21:51 sd-41648 dovecot: service=imap, user=laurent(a)xxxxxx.fr, ip=[::1]. Disconnected: Logged out rcvd=89, sent=1447 Mar 28 12:21:21 sd-41648 postfix/master[31571]: message repeated 4 times: [ warning: master_wakeup_timer_event: service pickup(public/pickup): Connection refused] Mar 28 12:21:52 sd-41648 postfix/master[31571]: warning: master_wakeup_timer_event: service qmgr(public/qmgr): Connection refused Mar 28 12:21:53 sd-41648 dovecot: imap-login: Login: user=<laurent(a)xxxxxx.fr>, method=PLAIN, rip=::1, lip=::1, mpid=13709, TLS, session=<cDPCdFcScwAAAAAAAAAAAAAAAAAAAAAB> Mar 28 12:21:54 sd-41648 dovecot: service=imap, user=laurent(a)xxxxxx.fr, ip=[::1]. Disconnected: Logged out rcvd=44, sent=457 Mar 28 12:21:54 sd-41648 dovecot: imap-login: Login: user=<laurent(a)xxxxxx.fr>, method=PLAIN, rip=::1, lip=::1, mpid=13711, TLS, session=<9vDSdFcSnQAAAAAAAAAAAAAAAAAAAAAB> Mar 28 12:21:56 sd-41648 dovecot: service=imap, user=laurent(a)xxxxxx.fr, ip=[::1]. Disconnected: Logged out rcvd=860, sent=132669 Mar 28 12:21:57 sd-41648 dovecot: imap-login: Login: user=<laurent(a)xxxxxx.fr>, method=PLAIN, rip=::1, lip=::1, mpid=13713, TLS, session=<1pvxdFcSpwAAAAAAAAAAAAAAAAAAAAAB> Mar 28 12:21:58 sd-41648 dovecot: service=imap, user=laurent(a)xxxxxx.fr, ip=[::1]. Disconnected: Logged out rcvd=1266, sent=108893 Mar 28 12:22:12 sd-41648 dovecot: imap-login: Login: user=<laurent(a)xxxxxx.fr>, method=PLAIN, rip=::1, lip=::1, mpid=13720, TLS, session=<XCXadVcStwAAAAAAAAAAAAAAAAAAAAAB> Mar 28 12:22:20 sd-41648 dovecot: service=imap, user=laurent(a)xxxxxx.fr, ip=[::1]. Disconnected: Logged out rcvd=309, sent=11066 Mar 28 12:22:21 sd-41648 postfix/master[31571]: warning: master_wakeup_timer_event: service pickup(public/pickup): Connection refused Mar 28 12:22:23 sd-41648 dovecot: imap-login: Login: user=<laurent(a)xxxxxx.fr>, method=PLAIN, rip=::1, lip=::1, mpid=13724, TLS, session=<QAiBdlcSwgAAAAAAAAAAAAAAAAAAAAAB> Mar 28 12:22:23 sd-41648 dovecot: service=imap, user=laurent(a)xxxxxx.fr, ip=[::1]. Disconnected: Logged out rcvd=214, sent=3159 I have : Plesk 12 Ubuntu 14.04.2 Dovecot 2.2.12 You can see my configuration file here : http://pastie.org/10059309 What should I do ? Thank you

2 2

Error after setting up fts /solr for Open-Xchange
by zucca＠systemschmiede.com 28 Mar '15

28 Mar '15

Hi List, i have tried to get fts / solr running with virtual all folder with Open-Xchange. I followed a pretty well written howto from Open-Xchanges Intranet, and i first thought everything was running smooth, as the first one or two searches were successful. However now whenever i try to search again for something in the virtual "all folders" Open-Xchange tells me: *Error* *Folder "virtual.all" has been closed on mail server xxx.xxx.xxx.xxx Probably your request took too long.** * /var/log/mail.err says: Mar 22 18:54:24 mailserver dovecot: imap(zucca(a)foo.bar): Panic: file fts-search-serialize.c: line 63 (fts_search_deserialize_add_idx): assertion failed: (*idx < buf->used) Mar 22 18:54:24 mailserver dovecot: imap(zucca(a)foo.bar): Error: Raw backtrace: /usr/lib/dovecot/libdovecot.so.0(+0x6c15f) [0x7f5110f5e15f] -> /usr/lib/dovecot/libdovecot.so.0(+0x6c1be) [0x7f5110f5e1be] -> /usr/lib/dovecot/libdovecot.so.0(i_fatal+0) [0x7f5110f1740e] -> /usr/lib/dovecot/modules/lib20_fts_plugin.so(+0xc847) [0x7f510fb07847] -> /usr/lib/dovecot/modules/lib20_fts_plugin.so(fts_search_deserialize_add_nonmatches+0x1c) [0x7f510fb0799c] -> /usr/lib/dovecot/modules/lib20_fts_plugin.so(+0xd263) [0x7f510fb08263] -> /usr/lib/dovecot/modules/lib20_fts_plugin.so(+0xd3e6) [0x7f510fb083e6] -> /usr/lib/dovecot/libdovecot-storage.so.0(+0xa812e) [0x7f511127112e] -> /usr/lib/dovecot/libdovecot-storage.so.0(index_storage_search_next_nonblock+0x4b) [0x7f51112717bb] -> /usr/lib/dovecot/modules/lib20_virtual_plugin.so(virtual_search_next_nonblock+0x13e) [0x7f510f8f2a7e] -> /usr/lib/dovecot/modules/lib20_virtual_plugin.so(virtual_search_next_nonblock+0x7e) [0x7f510f8f29be] -> /usr/lib/dovecot/libdovecot-storage.so.0(mailbox_search_next_nonblock+0x27) [0x7f511124b277] -> dovecot/imap(+0x1f27f) [0x7f511172527f] -> dovecot/imap(imap_search_start+0xfd) [0x7f51117256fd] -> dovecot/imap(cmd_sort+0x205) [0x7f511171b6c5] -> dovecot/imap(command_exec+0x3c) [0x7f511171fc4c] -> dovecot/imap(+0x18c30) [0x7f511171ec30] -> dovecot/imap(+0x18cea) [0x7f511171ecea] -> dovecot/imap(client_handle_input+0x115) [0x7f511171efb5] -> dovecot/imap(client_input+0x75) [0x7f511171f385] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_call_io+0x4e) [0x7f5110f6efbe] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run_internal+0xd7) [0x7f5110f6ffb7] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0x9) [0x7f5110f6f049] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_run+0x38) [0x7f5110f6f0c8] -> /usr/lib/dovecot/libdovecot.so.0(master_service_run+0x13) [0x7f5110f1c7b3] -> dovecot/imap(main+0x2ae) [0x7f511171352e] -> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xfd) [0x7f5110b85ead] -> dovecot/imap(+0xd69d) [0x7f511171369d] Mar 22 18:54:24 mailserver dovecot: imap(zucca(a)foo.bar): Fatal: master: service(imap): child 6594 killed with signal 6 (core dumps disabled) Mar 22 18:54:24 mailserver dovecot: imap(zucca(a)foo.bar): Panic: file fts-search-serialize.c: line 63 (fts_search_deserialize_add_idx): assertion failed: (*idx < buf->used) Mar 22 18:54:24 mailserver dovecot: imap(zucca(a)foo.bar): Error: Raw backtrace: /usr/lib/dovecot/libdovecot.so.0(+0x6c15f) [0x7fae1c14c15f] -> /usr/lib/dovecot/libdovecot.so.0(+0x6c1be) [0x7fae1c14c1be] -> /usr/lib/dovecot/libdovecot.so.0(i_fatal+0) [0x7fae1c10540e] -> /usr/lib/dovecot/modules/lib20_fts_plugin.so(+0xc847) [0x7fae1acf5847] -> /usr/lib/dovecot/modules/lib20_fts_plugin.so(fts_search_deserialize_add_nonmatches+0x1c) [0x7fae1acf599c] -> /usr/lib/dovecot/modules/lib20_fts_plugin.so(+0xd263) [0x7fae1acf6263] -> /usr/lib/dovecot/modules/lib20_fts_plugin.so(+0xd3e6) [0x7fae1acf63e6] -> /usr/lib/dovecot/libdovecot-storage.so.0(+0xa812e) [0x7fae1c45f12e] -> /usr/lib/dovecot/libdovecot-storage.so.0(index_storage_search_next_nonblock+0x4b) [0x7fae1c45f7bb] -> /usr/lib/dovecot/modules/lib20_virtual_plugin.so(virtual_search_next_nonblock+0x13e) [0x7fae1aae0a7e] -> /usr/lib/dovecot/modules/lib20_virtual_plugin.so(virtual_search_next_nonblock+0x7e) [0x7fae1aae09be] -> /usr/lib/dovecot/libdovecot-storage.so.0(mailbox_search_next_nonblock+0x27) [0x7fae1c439277] -> dovecot/imap(+0x1f27f) [0x7fae1c91327f] -> dovecot/imap(imap_search_start+0xfd) [0x7fae1c9136fd] -> dovecot/imap(cmd_sort+0x205) [0x7fae1c9096c5] -> dovecot/imap(command_exec+0x3c) [0x7fae1c90dc4c] -> dovecot/imap(+0x18c30) [0x7fae1c90cc30] -> dovecot/imap(+0x18cea) [0x7fae1c90ccea] -> dovecot/imap(client_handle_input+0x115) [0x7fae1c90cfb5] -> dovecot/imap(client_input+0x75) [0x7fae1c90d385] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_call_io+0x4e) [0x7fae1c15cfbe] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run_internal+0xd7) [0x7fae1c15dfb7] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0x9) [0x7fae1c15d049] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_run+0x38) [0x7fae1c15d0c8] -> /usr/lib/dovecot/libdovecot.so.0(master_service_run+0x13) [0x7fae1c10a7b3] -> dovecot/imap(main+0x2ae) [0x7fae1c90152e] -> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xfd) [0x7fae1bd73ead] -> dovecot/imap(+0xd69d) [0x7fae1c90169d] Mar 22 18:54:24 mailserver dovecot: imap(zucca(a)foo.bar): Fatal: master: service(imap): child 6598 killed with signal 6 (core dumps disabled) I don't even have any fts-search-serialize.c on the system... Maybe someone is able to help me? I know we're nearly there, but i can't find anything on this anywhere. If there's anything else you need to know in order to help, please let me know. Thank you very very much! Sascha _this is set under /opt/open-xchange/etc/findbasic.properties for Open-Xchange__:_ com.openexchange.find.basic.mail.allMessagesFolder = virtual.all _grep -v '^ *$#.*$\?$' /etc/dovecot/dovecot-sql.conf:_ driver = mysql connect = host=localhost dbname=dbispconfig user=ispconfig password=e04a9349a47706e4f18bee2782349355 default_pass_scheme = CRYPT password_query = SELECT password FROM mail_user WHERE (login = '%u' OR email = '%u') AND disable%Ls = 'n' user_query = SELECT email as user, maildir as home, CONCAT('maildir:', maildir, '/Maildir') as mail, uid, gid, CONCAT('*:storage=', quota, 'B') AS quota_rule, CONCAT(maildir, '/.sieve') as sieve FROM mail_user WHERE (login = '%u' OR email = '%u') AND `disable%Ls` = 'n' _||dovecot --version: _2.2.13 _dovecot -n: _# 2.2.13: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-37-pve x86_64 Debian 7.8 simfs auth_mechanisms = plain login disable_plaintext_auth = no listen = *,[::] log_timestamp = "%Y-%m-%d %H:%M:%S " mail_location = maildir:/var/vmail/%d/%n/Maildir mail_max_userip_connections = 150 mail_plugins = " acl fts fts_solr virtual" mail_privileged_group = vmail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace { inbox = yes location = prefix = separator = . type = private } namespace { list = children location = maildir:/var/vmail/%%d/%%n/Maildir:INDEX=/var/vmail/%d/%n/Maildir/shared/%%u prefix = Shared/.%%n/. separator = . subscriptions = no type = shared } namespace virtual { location = virtual:/etc/dovecot/virtual:INDEX=~/virtual mailbox all { special_use = \All } prefix = virtual. separator = . } passdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } plugin { acl = vfile acl_shared_dict = file:/var/vmail/shared-mailboxes.db fts = solr fts_autoindex = yes fts_solr = url=http://localhost:8090/solr/ quota = dict:user::file:/var/vmail/%d/%n/.quotausage sieve = /var/vmail/%d/%n/.sieve } protocols = imap pop3 sieve service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-userdb { group = vmail mode = 0600 user = vmail } user = root } service imap-login { client_limit = 1000 process_limit = 500 } ssl_ca = </usr/local/ispconfig/interface/ssl/mail_mailserver_de.ca-bundle ssl_cert = </etc/postfix/smtpd.cert ssl_key = </etc/postfix/smtpd.key ssl_protocols = !SSLv2 !SSLv3 userdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } protocol imap { mail_plugins = " acl fts fts_solr virtual imap_acl quota imap_quota" } protocol pop3 { mail_plugins = quota virtual pop3_uidl_format = %08Xu%08Xv } protocol lda { mail_plugins = sieve quota virtual }

4 8

v2.2.16 released
by Timo Sirainen 28 Mar '15

28 Mar '15

http://dovecot.org/releases/2.2/dovecot-2.2.16.tar.gz http://dovecot.org/releases/2.2/dovecot-2.2.16.tar.gz.sig A few fixes and some imapc improvements since the release candidate. * dbox: Resyncing (e.g. doveadm force-resync) no longer deletes dovecot.index.cache file. The cache file was rarely the problem so this just caused unnecessary slowness. * Mailbox name limits changed during mailbox creation: Each part of a hierarchical name (e.g. "x" or "y" in "x/y") can now be up to 255 chars long (instead of 200). This also reduces the max number of hierarchical levels to 16 (instead of 20) to keep the maximum name length 4096 (a common PATH_MAX limit). The 255 char limit is hopefully large enough for migrations from all existing systems. It's also the limit on many filesystems. + director: Added director_consistent_hashing setting to enable consistent hashing (instead of the mostly-random MD5 hashing). This causes fewer user moves between backends when backend counts are changed, which may improve performance (mainly due to caching). + director: Added support for "tags", which allows one director ring to serve multiple backend clusters with different sets of users. + LMTP server: Added lmtp_user_concurrency_limit setting to limit how many LMTP deliveries can be done concurrently for a single user. + LMTP server: Added support for STARTTLS command. + If logging data is generated faster than it can be written, log a warning about it and show information about it in log process's process title in ps output. Also don't allow a single service to flood too long at the cost of delaying other services' logging. + stats: Added support for getting global statistics. + stats: Use the same session IDs as the rest of Dovecot. + stats: Plugins can now create their own statistics fields + doveadm server: Non-mail related commands can now also be used via doveadm server (TCP socket). + doveadm proxying: passdb lookup can now override doveadm_port and change the username. + doveadm: Search query supports now "oldestonly" parameter to stop immediately on the first non-match. This can be used to optimize: doveadm expunge mailbox Trash savedbefore 30d oldestonly + doveadm: Added "save" command to directly save mails to specified mailbox (bypassing Sieve). + doveadm fetch: Added body.snippet field, which returns the first 100 chars of a message without whitespace or HTML tags. The result is stored into dovecot.index.cache, so it can be fetched efficiently. + dsync: Added -t <timestamp> parameter to sync only mails newer than the given received-timestamp. + dsync: Added -F [-]<flag> parameter to sync only mails with[out] the given flag/keyword. + dsync: Added -a <mailbox> parameter to specify the virtual mailbox containing user's all mails. If this mailbox is already found to contain the wanted mail (by its GUID), the message is copied from there instead of being re-saved. (This isn't efficient enough yet for incremental replication.) + dsync: -m parameter can now specify \Special-use names for mailboxes. + imapc: Added imapc_features=gmail-migration to help migrations from GMail. See http://wiki2.dovecot.org/Migration/Gmail + imapc: Added imapc_features=search to support IMAP SEARCH command. (Currently requires ESEARCH support from remote server.) + expire plugin: Added expire_cache=yes setting to cache most of the database lookups in dovecot index files. + quota: If overquota-flag in userdb doesn't match the current quota usage, execute a configured script. + redis dict: Added support for expiring keys (:expire_secs=n) and specifying the database number (:db=n) - auth: Don't crash if master user login is attempted without any configured master=yes passdbs - Parsing UTF-8 text for mails could have caused broken results sometimes if buffering was split in the middle of a UTF-8 character. This affected at least searching messages. - String sanitization for some logged output wasn't done properly: UTF-8 text could have been truncated wrongly or the truncation may not have happened at all. - fts-lucene: Lookups from virtual mailbox consisting of over 32 physical mailboxes could have caused crashes.

4 7

postfix sasl -> haproxy -> dovecot auth
by Edgaras Lukoševičius 28 Mar '15

28 Mar '15

Hello, is it possible to configure configure haproxy to work with postfix sasl and dovecot auth like this: clients -> 25:postfix -> 20025:haproxy -> 20025:auth-backend-1, 20025:auth-backend-2 The configuration I have now gives me this error randomly: 535 5.7.8 Error: authentication failed: Connection lost to authentication server This is probably because haproxy change servers while session is still active (postfix sasl don’t establish new connection to auth service every time new auth request arrives) Note that haproxy is between postfix and dovecot and is not facing clients directly, so there is no way to keep persistent connections by client ip. # POSTFIX smtpd_sasl_auth_enable = yes smtpd_sasl_authenticated_header = yes smtpd_sasl_exceptions_networks = smtpd_sasl_local_domain = smtpd_sasl_path = inet:127.0.0.1:20025 smtpd_sasl_security_options = noanonymous smtpd_sasl_tls_security_options = $smtpd_sasl_security_options smtpd_sasl_type = dovecot # HAPROX frontend postfix-sasl bind 127.0.0.1:20025 default_backend dovecot-auth backend dovecot-auth mode tcp option tcplog option srvtcpka hash-type consistent balance roundrobin server mail-backend-1 31.220.19.52:20025 check server mail-backend-2 31.220.19.53:20025 check

6 18

Re: Error "Next message unexpectedly lost from mbox file"
by Joseph Tam 28 Mar '15

28 Mar '15

BehrensM <EDV2(a)BehrensM.de> writes: > Beside the lokal mailserver-account(s) there is/are pulled Mails via > imap direct from the mailprovider, the "old" solution which shall be > replaced by the new mailserver. imap direct from provider shows the > mails/Attachments in corrects size an opening works. > Only using the local mailserver fails. > ... > Mar 26 09:40:05 raspberrypi dovecot: imap(info): Error: Next message > unexpectedly lost from mbox file /home/info/mail/.INBOX at 1066141935 > (cached) I couldn't follow all that you wrote, but these errors (actually, more like warnings) usually occur if you have a mail reader or any utility that modifies a mailbox outside of dovecot's sight. For example, a mail reader that does local manipulation of mbox files rather than via IMAP. This log message is more or less saying that the indices are out of sync with respect to the mailbox, and the message that it expected to find at a file offset is not there anymore. > Mar 26 09:40:07 raspberrypi dovecot: imap(info): Panic: file > mbox-sync.c: line 1286 (mbox_sync_handle_eof_updates): assertion failed: > (trailer_size <= 2) This, though, should not happen. Your version of dovecot is rather old, so maybe an update will solve this. Joseph Tam <jtam.home(a)gmail.com>

1 0

Re: Error: open() failed with file /var/vmail/... Too many open files
by Silvia Tormo 27 Mar '15

27 Mar '15

I've already tried creating etc/default/dovecot chmod +x it and inside put ulimit but didn't work. Also i've tried to put the ulimit into the /etc/init.d/dovecot linked file but i found still 1024 the limit kn dovecot. El 27/03/2015 22:03, Timo Sirainen <tss(a)iki.fi> escribió: > > On 26 Mar 2015, at 16:52, Silvia Tormo <silvia.tormo(a)addapta.com> wrote: > > > > Hello guys we have Dovecot 2.0.19 and we are getting those errors opening > > files of dovecot Too many open files, we¹ve tried to increase limits in > > /etc/security/limits > > /etc/security/ settings don't affect Dovecot (or any other server program). You need to put the ulimit commands somewhere in the init script. Or perhaps adding the ulimit command to /etc/default/dovecot would work. I don't know what's the correct Ubuntu way to do it.

1 0

Courier-dovecot migration issue: Forward and Junk flags
by Dennis Højgaard 27 Mar '15

27 Mar '15

Hello.. Another courier -> dovecot migrater here.. I ham having a bit of trouble converting the courier maildir correctly, or actually i'm almost there. The only thing i experience is that forwarded messages and messages marked as junk (in thunderbird) are downloaded again (i am using thunderbird and caching) after running the courier-dovecot-migrate.pl script and connecting to the newly configured dovecot imap server.. So i think that the Forward and Junk flag is not being converted..

3 4

Error: open() failed with file /var/vmail/... Too many open files
by Silvia Tormo 27 Mar '15

27 Mar '15

Hello guys we have Dovecot 2.0.19 and we are getting those errors opening files of dovecot Too many open files, we¹ve tried to increase limits in /etc/security/limits Wih ulimits a core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 63735 max locked memory (kbytes, -l) 64 max memory size (kbytes, -m) unlimited open files (-n) 102400 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 8192 cpu time (seconds, -t) unlimited max user processes (-u) 63735 virtual memory (kbytes, -v) unlimited file locks (-x) unlimited But if i make cat/proc/dovecotpid/limits Limit Soft Limit Hard Limit Units Max cpu time unlimited unlimited seconds Max file size unlimited unlimited bytes Max data size unlimited unlimited bytes Max stack size 8388608 unlimited bytes Max core file size 0 unlimited bytes Max resident set unlimited unlimited bytes Max processes 63735 63735 processes Max open files 1024 4096 files Max locked memory 65536 65536 bytes Max address space unlimited unlimited bytes Max file locks unlimited unlimited locks Max pending signals 63735 63735 signals Max msgqueue size 819200 819200 bytes Max nice priority 0 0 Max realtime priority 0 0 Max realtime timeout unlimited unlimited us I am still getting 1024 limit The only warning that we get is doveconf: Warning: service auth { client_limit=4096 } is lower than required under max. load (9516) doveconf: Warning: service anvil { client_limit=1000 } is lower than required under max. load (4299) I¹ve tried all i have found in internet, but there is no more info, and is like i¹ve increased system limits but not dovecot limits. Thankyou This is our CONF # 2.0.19: /etc/dovecot/dovecot.conf # OS: Linux 3.8.0-44-generic x86_64 Ubuntu 12.04.5 LTS ext4 auth_anonymous_username = anonymous auth_cache_negative_ttl = 1 hours auth_cache_size = 0 auth_cache_ttl = 1 hours auth_debug = no auth_debug_passwords = no auth_default_realm = auth_failure_delay = 2 secs auth_first_valid_uid = 500 auth_gssapi_hostname = VM8-ATISA.atisa.es auth_krb5_keytab = /etc/dovecot/dovecot.keytab auth_last_valid_uid = 0 auth_master_user_separator = auth_mechanisms = plain login gssapi auth_realms = auth_socket_path = auth-userdb auth_ssl_require_client_cert = no auth_ssl_username_from_cert = no auth_use_winbind = no auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@ auth_username_format = auth_username_translation = auth_verbose = no auth_verbose_passwords = no auth_winbind_helper_path = /usr/bin/ntlm_auth auth_worker_max_count = 30 base_dir = /var/run/dovecot config_cache_size = 1 M debug_log_path = default_client_limit = 1000 default_idle_kill = 60 default_internal_user = dovecot default_login_user = dovenull default_process_limit = 100 default_vsz_limit = 256 M deliver_log_format = msgid=%m: %$ dict_db_config = director_doveadm_port = 0 director_mail_servers = director_servers = director_user_expire = 15 mins disable_plaintext_auth = no dotlock_use_excl = yes doveadm_allowed_commands = doveadm_password = doveadm_proxy_port = 0 doveadm_socket_path = doveadm-server doveadm_worker_count = 0 first_valid_gid = 112 first_valid_uid = 107 hostname = imap_capability = imap_client_workarounds = imap_id_log = imap_id_send = imap_idle_notify_interval = 2 mins imap_logout_format = bytes=%i/%o imap_max_line_length = 64 k import_environment = TZ info_log_path = instance_name = dovecot last_valid_gid = 0 last_valid_uid = 0 lda_mailbox_autocreate = no lda_mailbox_autosubscribe = no lda_original_recipient_header = libexec_dir = /usr/lib/dovecot listen = *, :: lmtp_proxy = no lmtp_save_to_detail_mailbox = no lock_method = fcntl log_path = syslog log_timestamp = "%Y-%m-%d %H:%M:%S " login_access_sockets = login_greeting = Dovecot ready. login_log_format = %$: %s login_log_format_elements = user=<%u> method=%m rip=%r lip=%l mpid=%e %c login_trusted_networks = mail_access_groups = mail_attachment_dir = mail_attachment_fs = sis posix mail_attachment_hash = %{sha1} mail_attachment_min_size = 128 k mail_cache_fields = flags mail_cache_min_mail_count = 0 mail_chroot = mail_debug = no mail_fsync = optimized mail_full_filesystem_access = no mail_gid = 112 mail_home = /var/vmail/sieve/%d/%u mail_location = maildir:/var/vmail/%$ mail_log_prefix = "%s(%u): " mail_max_keyword_length = 50 mail_max_lock_timeout = 0 mail_max_userip_connections = 10 mail_never_cache_fields = imap.envelope mail_nfs_index = no mail_nfs_storage = no mail_plugin_dir = /usr/lib/dovecot/modules mail_plugins = mail_privileged_group = mail_save_crlf = no mail_temp_dir = /tmp mail_uid = 107 mailbox_idle_check_interval = 30 secs mailbox_list_index_disable = no maildir_copy_with_hardlinks = yes maildir_stat_dirs = no maildir_very_dirty_syncs = no managesieve_client_workarounds = managesieve_implementation_string = Dovecot Pigeonhole managesieve_logout_format = bytes=%i/%o managesieve_max_compile_errors = 5 managesieve_max_line_length = 65536 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body e notify environment mailbox date ihave master_user_separator = mbox_dirty_syncs = yes mbox_dotlock_change_timeout = 2 mins mbox_lazy_writes = yes mbox_lock_timeout = 5 mins mbox_min_index_size = 0 mbox_read_locks = fcntl mbox_very_dirty_syncs = no mbox_write_locks = dotlock fcntl mdbox_preallocate_space = no mdbox_rotate_interval = 0 mdbox_rotate_size = 2 M mmap_disable = no passdb { args = /etc/dovecot/dovecot-ldap.conf deny = no driver = ldap master = no pass = no } plugin { autocreate = Trash autocreate2 = Spam autocreate3 = Sent autocreate4 = Drafts autosubscribe = Trash autosubscribe2 = Spam autosubscribe3 = Sent autosubscribe4 = Drafts quota = maildir:User quota quota_rule = *:storage=0 sieve = /var/vmail/sieve/%d/%u/sieve-script sieve_dir = /var/vmail/sieve/%d/%u sieve_global_path = /var/vmail/sieve/default.sieve sieve_storage = /var/vmail/sieve/%d/%u } pop3_client_workarounds = pop3_enable_last = no pop3_fast_size_lookups = no pop3_lock_session = no pop3_logout_format = top=%t/%p, retr=%r/%b, del=%d/%m, size=%s pop3_no_flag_updates = no pop3_reuse_xuidl = no pop3_save_uidl = no pop3_uidl_format = %08Xu%08Xv postmaster_address = protocols = pop3 imap sieve quota_full_tempfail = no recipient_delimiter = + rejection_reason = Your message to <%t> was automatically rejected:%n%r rejection_subject = Rejected: %s sendmail_path = /usr/sbin/sendmail service anvil { chroot = empty client_limit = 0 drop_priv_before_exec = no executable = anvil extra_groups = group = idle_kill = 4294967295 secs privileged_group = process_limit = 1 process_min_avail = 1 protocol = service_count = 0 type = anvil unix_listener anvil-auth-penalty { group = mode = 0600 user = } unix_listener anvil { group = mode = 0600 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service auth-worker { chroot = client_limit = 1 drop_priv_before_exec = no executable = auth -w extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 1 type = unix_listener auth-worker { group = mode = 0600 user = $default_internal_user } user = vsz_limit = 18446744073709551615 B } service auth { chroot = client_limit = 4096 drop_priv_before_exec = no executable = /usr/lib/dovecot/auth extra_groups = group = idle_kill = 0 privileged_group = process_limit = 1 process_min_avail = 0 protocol = service_count = 0 type = unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-client { group = mode = 0600 user = } unix_listener auth-login { group = mode = 0600 user = $default_internal_user } unix_listener auth-master { group = ebox mode = 0600 user = ebox } unix_listener auth-userdb { group = mode = 0600 user = } unix_listener login/login { group = mode = 0666 user = } user = dovecot vsz_limit = 18446744073709551615 B } service config { chroot = client_limit = 0 drop_priv_before_exec = no executable = config extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 0 type = config unix_listener config { group = mode = 0600 user = } user = vsz_limit = 18446744073709551615 B } service dict { chroot = client_limit = 1 drop_priv_before_exec = no executable = dict extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 0 type = unix_listener dict { group = mode = 0600 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service director { chroot = client_limit = 0 drop_priv_before_exec = no executable = director extra_groups = fifo_listener login/proxy-notify { group = mode = 00 user = } group = idle_kill = 4294967295 secs privileged_group = process_limit = 1 process_min_avail = 0 protocol = service_count = 0 type = unix_listener director-admin { group = mode = 0600 user = } unix_listener login/director { group = mode = 00 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service dns_client { chroot = client_limit = 1 drop_priv_before_exec = no executable = dns-client extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 0 type = unix_listener dns-client { group = mode = 0666 user = } unix_listener login/dns-client { group = mode = 0666 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service doveadm { chroot = client_limit = 1 drop_priv_before_exec = no executable = doveadm-server extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 1 type = unix_listener doveadm-server { group = mode = 0600 user = } user = vsz_limit = 18446744073709551615 B } service imap-login { chroot = login client_limit = 1024 drop_priv_before_exec = no executable = imap-login extra_groups = group = idle_kill = 0 inet_listener imap { address = * port = 143 ssl = no } inet_listener imaps { address = * port = 993 ssl = yes } privileged_group = process_limit = 4096 process_min_avail = 0 protocol = imap service_count = 0 type = login user = $default_login_user vsz_limit = 18446744073709551615 B } service imap { chroot = client_limit = 1024 drop_priv_before_exec = no executable = imap extra_groups = group = idle_kill = 0 privileged_group = process_limit = 4096 process_min_avail = 0 protocol = imap service_count = 0 type = unix_listener login/imap { group = mode = 0666 user = } user = vsz_limit = 18446744073709551615 B } service ipc { chroot = empty client_limit = 0 drop_priv_before_exec = no executable = ipc extra_groups = group = idle_kill = 0 privileged_group = process_limit = 1 process_min_avail = 0 protocol = service_count = 0 type = unix_listener ipc { group = mode = 0600 user = } unix_listener login/ipc-proxy { group = mode = 0600 user = $default_login_user } user = $default_internal_user vsz_limit = 18446744073709551615 B } service lmtp { chroot = client_limit = 1 drop_priv_before_exec = no executable = lmtp extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = lmtp service_count = 0 type = unix_listener lmtp { group = mode = 0666 user = } user = vsz_limit = 18446744073709551615 B service log { chroot = client_limit = 0 drop_priv_before_exec = no executable = log extra_groups = group = idle_kill = 0 privileged_group = process_limit = 1 process_min_avail = 0 protocol = service_count = 0 type = log user = vsz_limit = 18446744073709551615 B } service managesieve-login { chroot = login client_limit = 0 drop_priv_before_exec = no executable = managesieve-login extra_groups = group = idle_kill = 0 inet_listener sieve { address = port = 4190 ssl = no } privileged_group = process_limit = 0 process_min_avail = 0 protocol = sieve service_count = 1 type = login user = $default_login_user vsz_limit = 18446744073709551615 B } service managesieve { chroot = client_limit = 1 drop_priv_before_exec = no executable = managesieve extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = sieve service_count = 1 type = unix_listener login/sieve { group = mode = 0666 user = } user = vsz_limit = 18446744073709551615 B } service pop3-login { chroot = login client_limit = 0 drop_priv_before_exec = no executable = pop3-login extra_groups = group = idle_kill = 0 inet_listener pop3 { address = port = 110 ssl = no } inet_listener pop3s { address = port = 995 ssl = yes } privileged_group = process_limit = 0 process_min_avail = 0 protocol = pop3 service_count = 1 type = login user = $default_login_user vsz_limit = 18446744073709551615 B } service pop3 { chroot = client_limit = 1 drop_priv_before_exec = no executable = pop3 extra_groups = group = idle_kill = 0 privileged_group = process_limit = 1024 process_min_avail = 0 protocol = pop3 service_count = 1 type = unix_listener login/pop3 { group = mode = 0666 user = } user = vsz_limit = 18446744073709551615 B } service ssl-params { chroot = client_limit = 0 drop_priv_before_exec = no executable = ssl-params extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 0 type = startup unix_listener login/ssl-params { group = mode = 0666 user = } user = vsz_limit = 18446744073709551615 B } shutdown_clients = yes ssl = yes ssl_ca = ssl_cert = </etc/dovecot/ssl/mx_atisa_es.crt ssl_cert_username_field = commonName ssl_cipher_list = ALL:!LOW:!SSLv2:!EXP:!aNULL ssl_client_cert = ssl_client_key = ssl_key = </etc/dovecot/ssl/mx_atisa_es.key ssl_key_password = ssl_parameters_regenerate = 168 ssl_protocols = !SSLv2 ssl_verify_client_cert = no submission_host = syslog_facility = mail userdb { args = /etc/dovecot/dovecot-ldap.conf driver = ldap } valid_chroot_dirs = verbose_proctitle = no verbose_ssl = no version_ignore = no protocol imap { mail_plugins = quota imap_quota autocreate } protocol pop3 { mail_plugins = quota } protocol lda { auth_socket_path = /var/run/dovecot/auth-master mail_plugins = sieve quota postmaster_address = postmaster }

2 1

IMAP ANNOTATE Extension RFC5257: priority on roadmap
by Florian Sager 27 Mar '15

27 Mar '15

Hi Timo, congrats to the merger with OX. Currently the implementation of RFC 5257, ANNOTATE-EXPERIMENT-1, has only low priority on http://wiki2.dovecot.org/Roadmap I want to explain a scenario that would benefit from annotation support to - maybe - increase the priority in your roadmap: I'm currently working on a project to publish bank customer related documents inside a banking webinterface (they call it 'postbox'). There are different requirements that would be satisfied very well by an IMAP server as data storage/provider for a long term email/document archive inside the bank. Annotations would be necessary to tag emails with customer numbers and document IDs to allow a delayed grouping of several emails by such identifiers (message IDs may not be available for references so annotations have to be used to compute references indirectly). Same for sorting and filtering by customer number or account number. I would highly appreciate if you at Dovecot could increase the priority of ANNOTATE in your roadmap. Best regards, Florian -- Agitos GmbH Emil-Geis-Straße 40 D-81379 München Telefon: +49-89-381 564 46-0 Telefax: +49-89-381 564 46-9 E-Mail: support(a)agitos.de Web: http://www.agitos.de Registergericht: Amtsgericht München, HRB 213590 Geschäftsführer: Dipl.-Inf. (Univ.) Florian Sager Ust-Identifikationsnummer: DE296114074

3 2

Re: Option to not add "Received" header ?
by G H 27 Mar '15

27 Mar '15

You could remove them with sieve in the latest version of pigeonhole. On Mar 24, 2015 7:33 AM, Florent B <florent(a)coppint.com> wrote: > > I know about RFC's, but that could be an option, not enabled by default.

2 1

Error "Next message unexpectedly lost from mbox file"
by BehrensM 26 Mar '15

26 Mar '15

Hi, i am the new one;) - and my first post is about a problem i ran into. I installed a mailserver on a RaspberryPi. It works mostly well, using dovecot 2.1.7. (exim4 4.8 (not in use, smtp direct to Provider), fetchmail 6.3.21, RasPi 3.12.28+, Roundcube (no version known) - the whole system went through an apg-get update/uppgrade this night to look if a known problem already been fixed. When getting bigger Attachments (not sure if it occurs by smaller too, but bigger attachments are normally "to open" and often fail) Not all of them, but much. Unpredictable when it occurs. These Attachments are shown with less size in the Mailclient (Thunderbird actual version). In Roundcube they are shown to small, too. But it looks as the mail IS "fullsized" on the lokal Mailserver: When i use Roundcube and try to open an x00kB .zip, Roundcube starts to get the whole xyMB (real size) .zip-file, even when disconnected from internet. Thunderbird behaves different, doesnt load the full file, so "ignore" is no option;) And yes, i always dont like that option:) Beside the lokal mailserver-account(s) there is/are pulled Mails via imap direct from the mailprovider, the "old" solution which shall be replaced by the new mailserver. imap direct from provider shows the mails/Attachments in corrects size an opening works. Only using the local mailserver fails. In the log-files i found (i quote a part in which - cronjob matching - one of these defect mails was pulled): In Syslog: Mar 26 09:40:01 raspberrypi /USR/SBIN/CRON[26696]: (info) CMD (/usr/bin/fetchmail -s --fetchsizelimit 0 --fetchlimit 0 --limit 0 --timeout 300) Mar 26 09:40:05 raspberrypi dovecot: imap(info): Error: Next message unexpectedly lost from mbox file /home/info/mail/.INBOX at 1066141935 (cached) Mar 26 09:40:05 raspberrypi dovecot: imap(info): Error: read(/home/info/mail/.INBOX) failed: Invalid argument (FETCH for mailbox INBOX UID 1247) Mar 26 09:40:05 raspberrypi dovecot: imap(info): Disconnected: Internal error occurred. Refer to server log for more information. [2015-03-26 09:40:05] in= 2693 out=172626 Mar 26 09:40:07 raspberrypi dovecot: imap(info): Panic: file mbox-sync.c: line 1286 (mbox_sync_handle_eof_updates): assertion failed: (trailer_size <= 2) Mar 26 09:40:07 raspberrypi dovecot: imap(info): Fatal: master: service(imap): child 26341 killed with signal 6 (core dumps disabled) Mar 26 09:40:51 raspberrypi dovecot: imap-login: Login: user=<info>, method=PLAIN, rip=192.168.100.27, lip=192.168.100.199, mpid=26723, TLS, session=<hbkg+ SwS3gDAqGQb> Mar 26 09:42:16 raspberrypi dovecot: imap(info): Connection closed in=752 out=21810 And in mail.err: Mar 26 09:40:05 raspberrypi dovecot: imap(info): Error: Next message unexpectedly lost from mbox file /home/info/mail/.INBOX at 1066141935 (cached) Mar 26 09:40:05 raspberrypi dovecot: imap(info): Error: read(/home/info/mail/.INBOX) failed: Invalid argument (FETCH for mailbox INBOX UID 1247) Mar 26 09:40:07 raspberrypi dovecot: imap(info): Panic: file mbox-sync.c: line 1286 (mbox_sync_handle_eof_updates): assertion failed: (trailer_size <= 2) Mar 26 09:40:07 raspberrypi dovecot: imap(info): Fatal: master: service(imap): child 26341 killed with signal 6 (core dumps disabled) (To tell the whole story: /home/$user/mail is link by NFS to a NAS. The limit 0 and timeout entries are just to test after running into the error and before i discovered that not fetchmail but dovecot looks to cause the problem) In the archive i only found an issue in 2010 with a CR/LF-problem, but it is a) a long time ago an b) i am not sure that my specific problem comes from the same direction. http://www.dovecot.org/list/dovecot/2010-November/054938.html Any suggestions how to solve that problem? Thanks.

1 0

Lazy_expunge issue...
by giorgio paolucci 26 Mar '15

26 Mar '15

Hello everybody, I have a question about lazy_expunge plugin. I set up Dovecot with lazy_expunge plugin on a Debian Wheezy machine; I setup also a global acl to keep .expunged namespace readonly for all users. Imap client is Horde Webmail Edition 5.2.3 When I try to delete folders containing subfolders, lazy_expunge copies into expunged private namespace only the upper level folder. The subfolder and all messages inside it are lost. Quota is also corrupted (subfolder messages are still accounted in the Message counter and disk quota) and a recalc is needed to fix. Problem can be reproduced this way: 1)Create with horde a folder "extern" 2)Create a subfolder "extern/subfolder" 3) copy some messages into extern and some into subfolder (in my test 5 messages each) 4) verify quota usage: root@gold:# doveadm quota get -u testimap2.csia(a)unipd.it Quota name Type Value Limit % User quota STORAGE 4 1126400 0 User quota MESSAGE 10 - 0 3)Delete extern with option to delete all subfolders. 4)verify that all folders and messages have been deleted 5)verify that only extern folder has been copied into .expunged namespace and verify that quota still reports the 5 messages that were in subfolder: root@gold:# doveadm quota get -u testimap2.csia(a)unipd.it Quota name Type Value Limit % User quota STORAGE 2 1126400 0 User quota MESSAGE 5 - 0 6) recalc quota and check again that quota has benne corrected: # doveadm quota recalc -u testimap2.csia(a)unipd.it root@gold:# doveadm quota get -u testimap2.csia(a)unipd.it Quota name Type Value Limit % User quota STORAGE 0 1126400 0 User quota MESSAGE 0 - 0 Is there anything I am missing? Thanks in advance. Best regards. Giorgio Paolucci ================================================ dovecot version 2.2.13 OS :Linux bronze 3.2.0-4-amd64 #1 SMP Debian 3.2.65-1+deb7u1 x86_64 GNU/Linux ================================================= root@bronze:/etc/dovecot/conf.d# more ../dovecot-acl _PostaCancellataPerErrore* owner lrik ================================================= root@bronze:/etc/dovecot/conf.d# dovecot -n # 2.2.13: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-4-amd64 x86_64 Debian 7.8 auth_default_realm = unipd.it disable_plaintext_auth = no log_path = /var/log/dovecot/dovecot.log mail_debug = yes mail_fsync = always mail_nfs_index = yes mail_nfs_storage = yes mail_plugins = quota listescape lazy_expunge acl mail_log notify mdbox_rotate_interval = 1 days mdbox_rotate_size = 10 M mmap_disable = yes namespace { hidden = no inbox = no list = yes location = maildir:/SYSTEM/USERS/mailbox/%d/%1n/%u/expunged mailbox .LEGGIMI { auto = subscribe } mailbox INBOX.Trash { auto = subscribe special_use = \Trash } prefix = _PostaCancellataPerErrore/ separator = / subscriptions = yes type = private } namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = separator = / } passdb { args = /etc/dovecot/conf.d/dovecot-sql.conf.ext driver = sql } passdb { args = /etc/dovecot/conf.d/dovecot-sqlSSO.conf.ext driver = sql } plugin { acl = vfile:/etc/dovecot/dovecot-acl lazy_expunge = _PostaCancellataPerErrore/ lazy_expunge_only_last_instance = yes mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename mail_log_fields = uid box msgid size pop3_migration_mailbox = INBOX quota = dict:User quota::file:/SYSTEM/USERS/homes/%d/%1u/%u/%u.quota quota_rule = *:storage=1100M quota_rule2 = Trash:storage=+100M quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=80%% quota-warning 80 %u sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } pop3c_host = 147.162.10.68 protocols = imap pop3 lmtp service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-userdb { group = vmail mode = 0600 user = vmail } } service imap-login { inet_listener imaps { ssl = no } process_min_avail = 20 service_count = 1 } service imap { executable = imap postlogin } service lmtp { executable = lmtp inet_listener lmtp { port = 2223 } process_min_avail = 15 } service pop3-login { inet_listener pop3s { ssl = no } } service postlogin { executable = script-login -d rawlog user = vmail } service quota-warning { executable = script /SYSTEM/DOVECOT/scripts/quota-warning.sh unix_listener quota-warning { user = vmail } user = vmail } ssl = no userdb { driver = prefetch } userdb { args = /etc/dovecot/conf.d/dovecot-sql.conf.ext driver = sql } userdb { driver = prefetch } userdb { args = /etc/dovecot/conf.d/dovecot-sqlSSO.conf.ext driver = sql } protocol lmtp { info_log_path = /tmp/dovecot-lmtp-info.log log_path = /tmp/dovecot-lmtp.log mail_plugins = quota listescape lazy_expunge acl mail_log notify } protocol imap { imap_max_line_length = 128 k mail_plugins = quota listescape lazy_expunge acl mail_log notify imap_quota acl imap_acl } protocol doveadm { mail_plugins = quota listescape lazy_expunge acl mail_log notify pop3_migration } protocol pop3 { pop3_no_flag_updates = yes pop3_uidl_format = %10v.%09u } =================================== root@gold:# doveadm user -u testimap2.csia(a)unipd.it userdb: testimap2.csia(a)unipd.it uid : 1003 gid : 1003 home : /SYSTEM/USERS/homes/unipd.it/t/testimap2.csia(a)unipd.it mail : sdbox:/NAS1/unipd.it/mailbox/t/testimap2.csia@unipd.it/sdbox:INDEX=/INDEX1/unipd.it/t/testimap2.csia@unipd.it:ALT=/ALTSTORAGE1/unipd.it/t/testimap2.csia@unipd.it ------------------------------- Here follows IMAP transaction in and out from rawlog IN: 2 ENABLE QRESYNC 3 NAMESPACE 4 LIST () "" (extern/*) 5 DELETE extern 6 UNSUBSCRIBE extern 7 DELETE extern/subfolder 8 UNSUBSCRIBE extern/subfolder 9 LOGOUT OUT: root@gold:/SYSTEM/USERS/homes/unipd.it/t/testimap2.csia@unipd.it/dovecot.rawlog# more 20150326-095943-1773.out 1 OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS THREAD=OR DEREDSUBJECT MULTIAPPEND URL-PARTIAL CATENATE UNSELECT CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARC H ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS SPECIAL-USE BINARY MOVE QUOTA ACL RIGHTS=texk] Logged in * ENABLED QRESYNC 2 OK Enabled. * NAMESPACE (("" "/")("_PostaCancellataPerErrore/" "/")) NIL NIL 3 OK Namespace completed. * LIST () "/" extern/subfolder 4 OK List completed. 5 OK Delete completed. 6 OK Unsubscribe completed. 7 OK Delete completed. 8 OK Unsubscribe completed. * BYE Logging out 9 OK Logout completed. ================================== Here follows debug log from dovecot. Mar 26 09:59:43 imap-login: Info: Login: user=<testimap2.csia(a)unipd.it>, method=PLAIN, rip=147.162.10.141, lip=147.162.10.84, mpid=1771, session=<DXefPC0SWQCTogqN> Mar 26 09:59:43 script-login: Debug: Added userdb setting: mail_location=sdbox:/NAS1/unipd.it/mailbox/t/testimap2.csia@unipd.it/sdbox:INDEX=/INDEX1/unipd.it/t/testimap2.csia@unipd.it:ALT=/ALTSTORAGE1/unipd.it/t/testimap2.csia@unipd.it Mar 26 09:59:43 imap: Debug: Loading modules from directory: /usr/lib/dovecot/modules Mar 26 09:59:43 imap: Debug: Module loaded: /usr/lib/dovecot/modules/lib01_acl_plugin.so Mar 26 09:59:43 imap: Debug: Module loaded: /usr/lib/dovecot/modules/lib02_imap_acl_plugin.so Mar 26 09:59:43 imap: Debug: Module loaded: /usr/lib/dovecot/modules/lib02_lazy_expunge_plugin.so Mar 26 09:59:43 imap: Debug: Module loaded: /usr/lib/dovecot/modules/lib10_quota_plugin.so Mar 26 09:59:43 imap: Debug: Module loaded: /usr/lib/dovecot/modules/lib11_imap_quota_plugin.so Mar 26 09:59:43 imap: Debug: Module loaded: /usr/lib/dovecot/modules/lib15_notify_plugin.so Mar 26 09:59:43 imap: Debug: Module loaded: /usr/lib/dovecot/modules/lib20_listescape_plugin.so Mar 26 09:59:43 imap: Debug: Module loaded: /usr/lib/dovecot/modules/lib20_mail_log_plugin.so Mar 26 09:59:43 imap: Debug: Added userdb setting: mail_location=sdbox:/NAS1/unipd.it/mailbox/t/testimap2.csia@unipd.it/sdbox:INDEX=/INDEX1/unipd.it/t/testimap2.csia@unipd.it:ALT=/ALTSTORAGE1/unipd.it/t/testimap2.csia@unipd.it Mar 26 09:59:43 imap(testimap2.csia(a)unipd.it): Debug: Effective uid=1003, gid=1003, home=/SYSTEM/USERS/homes/unipd.it/t/testimap2.csia(a)unipd.it Mar 26 09:59:43 imap(testimap2.csia(a)unipd.it): Debug: acl: No acl_shared_dict setting - shared mailbox listing is disabled Mar 26 09:59:43 imap(testimap2.csia(a)unipd.it): Debug: Quota root: name=User quota backend=dict args=:file:/SYSTEM/USERS/homes/unipd.it/t/testimap2.csia@unipd.it/testimap2.csia@unipd.it.quota Mar 26 09:59:43 imap(testimap2.csia(a)unipd.it): Debug: Quota rule: root=User quota mailbox=* bytes=1153433600 messages=0 Mar 26 09:59:43 imap(testimap2.csia(a)unipd.it): Debug: Quota rule: root=User quota mailbox=Trash bytes=+104857600 messages=0 Mar 26 09:59:43 imap(testimap2.csia(a)unipd.it): Debug: Quota warning: bytes=1095761920 (95%) messages=0 reverse=no command=quota-warning 95 testimap2.csia(a)unipd.it Mar 26 09:59:43 imap(testimap2.csia(a)unipd.it): Debug: Quota warning: bytes=922746880 (80%) messages=0 reverse=no command=quota-warning 80 testimap2.csia(a)unipd.it Mar 26 09:59:43 imap(testimap2.csia(a)unipd.it): Debug: Quota grace: root=User quota bytes=115343360 (10%) Mar 26 09:59:43 imap(testimap2.csia(a)unipd.it): Debug: dict quota: user=testimap2.csia(a)unipd.it, uri=file:/SYSTEM/USERS/homes/unipd.it/t/testimap2.csia@unipd.it/testimap2.csia@unipd.it.quota, noenforcing=0 Mar 26 09:59:43 imap(testimap2.csia(a)unipd.it): Debug: Namespace inbox: type=private, prefix=, sep=/, inbox=yes, hidden=no, list=yes, subscriptions=yes location=sdbox:/NAS1/unipd.it/mailbox/t/testimap2.csia@unipd.it/sdbox:INDEX=/INDEX1/unipd.it/t/testimap2.csia@unipd.it:ALT=/ALTSTORAGE1/unipd.it/t/testimap2.csia@unipd.it Mar 26 09:59:43 imap(testimap2.csia(a)unipd.it): Debug: fs: root=/NAS1/unipd.it/mailbox/t/testimap2.csia(a)unipd.it/sdbox, index=/INDEX1/unipd.it/t/testimap2.csia(a)unipd.it, indexpvt=, control=, inbox=, alt=/ALTSTORAGE1/unipd.it/t/testimap2.csia(a)unipd.it Mar 26 09:59:43 imap(testimap2.csia(a)unipd.it): Debug: acl: initializing backend with data: vfile:/etc/dovecot/dovecot-acl Mar 26 09:59:43 imap(testimap2.csia(a)unipd.it): Debug: acl: acl username = testimap2.csia(a)unipd.it Mar 26 09:59:43 imap(testimap2.csia(a)unipd.it): Debug: acl: owner = 1 Mar 26 09:59:43 imap(testimap2.csia(a)unipd.it): Debug: acl vfile: Global ACL file: /etc/dovecot/dovecot-acl Mar 26 09:59:43 imap(testimap2.csia(a)unipd.it): Debug: Namespace : type=private, prefix=_PostaCancellataPerErrore/, sep=/, inbox=no, hidden=no, list=yes, subscriptions=yes location=maildir:/SYSTEM/USERS/mailbox/unipd.it/t/testimap2.csia@unipd.it/expunged Mar 26 09:59:43 imap(testimap2.csia(a)unipd.it): Debug: maildir++: root=/SYSTEM/USERS/mailbox/unipd.it/t/testimap2.csia(a)unipd.it/expunged, index=, indexpvt=, control=, inbox=, alt= Mar 26 09:59:43 imap(testimap2.csia(a)unipd.it): Debug: acl: initializing backend with data: vfile:/etc/dovecot/dovecot-acl Mar 26 09:59:43 imap(testimap2.csia(a)unipd.it): Debug: acl: acl username = testimap2.csia(a)unipd.it Mar 26 09:59:43 imap(testimap2.csia(a)unipd.it): Debug: acl: owner = 1 Mar 26 09:59:43 imap(testimap2.csia(a)unipd.it): Debug: acl vfile: Global ACL file: /etc/dovecot/dovecot-acl Mar 26 09:59:43 imap(testimap2.csia(a)unipd.it): Debug: acl vfile: file /NAS1/unipd.it/mailbox/t/testimap2.csia(a)unipd.it/sdbox/mailboxes/dovecot-acl not found Mar 26 09:59:43 imap(testimap2.csia(a)unipd.it): Debug: acl vfile: file /NAS1/unipd.it/mailbox/t/testimap2.csia@unipd.it/sdbox/mailboxes/extern/subfolder/dbox-Mails/dovecot-acl not found Mar 26 09:59:43 imap(testimap2.csia(a)unipd.it): Debug: acl vfile: file /NAS1/unipd.it/mailbox/t/testimap2.csia(a)unipd.it/sdbox/mailboxes/extern/dbox-Mails/dovecot-acl not found Mar 26 09:59:43 imap(testimap2.csia(a)unipd.it): Debug: acl vfile: file /SYSTEM/USERS/mailbox/unipd.it/t/testimap2.csia(a)unipd.it/expunged/.extern/dovecot-acl not found Mar 26 09:59:43 imap(testimap2.csia(a)unipd.it): Debug: acl vfile: file /SYSTEM/USERS/mailbox/unipd.it/t/testimap2.csia(a)unipd.it/expunged/dovecot-acl not found Mar 26 09:59:43 imap(testimap2.csia(a)unipd.it): Debug: Namespace _PostaCancellataPerErrore/: /SYSTEM/USERS/mailbox/unipd.it/t/testimap2.csia(a)unipd.it/expunged/.extern doesn't exist yet, using default permissions Mar 26 09:59:43 imap(testimap2.csia(a)unipd.it): Debug: Namespace _PostaCancellataPerErrore/: Using permissions from /SYSTEM/USERS/mailbox/unipd.it/t/testimap2.csia(a)unipd.it/expunged: mode=0700 gid=default Mar 26 09:59:43 imap(testimap2.csia(a)unipd.it): Debug: acl vfile: file /SYSTEM/USERS/mailbox/unipd.it/t/testimap2.csia(a)unipd.it/expunged/dovecot-acl not found Mar 26 09:59:43 imap(testimap2.csia(a)unipd.it): Debug: acl vfile: file /SYSTEM/USERS/mailbox/unipd.it/t/testimap2.csia(a)unipd.it/expunged/.extern/dovecot-acl not found Mar 26 09:59:43 imap(testimap2.csia(a)unipd.it): Info: copy from extern: box=_PostaCancellataPerErrore/extern, uid=1, msgid=, size=523 Mar 26 09:59:43 imap(testimap2.csia(a)unipd.it): Info: copy from extern: box=_PostaCancellataPerErrore/extern, uid=2, msgid=, size=523 Mar 26 09:59:43 imap(testimap2.csia(a)unipd.it): Info: copy from extern: box=_PostaCancellataPerErrore/extern, uid=3, msgid=, size=523 Mar 26 09:59:43 imap(testimap2.csia(a)unipd.it): Info: copy from extern: box=_PostaCancellataPerErrore/extern, uid=4, msgid=, size=523 Mar 26 09:59:43 imap(testimap2.csia(a)unipd.it): Info: copy from extern: box=_PostaCancellataPerErrore/extern, uid=5, msgid=, size=524 Mar 26 09:59:43 imap(testimap2.csia(a)unipd.it): Info: expunge: box=extern, uid=1, msgid=, size=523 Mar 26 09:59:43 imap(testimap2.csia(a)unipd.it): Info: expunge: box=extern, uid=2, msgid=, size=523 Mar 26 09:59:43 imap(testimap2.csia(a)unipd.it): Info: expunge: box=extern, uid=3, msgid=, size=523 Mar 26 09:59:43 imap(testimap2.csia(a)unipd.it): Info: expunge: box=extern, uid=4, msgid=, size=523 Mar 26 09:59:43 imap(testimap2.csia(a)unipd.it): Info: expunge: box=extern, uid=5, msgid=, size=524 Mar 26 09:59:43 imap(testimap2.csia(a)unipd.it): Debug: Namespace : Using permissions from /NAS1/unipd.it/mailbox/t/testimap2.csia(a)unipd.it/sdbox: mode=0755 gid=default Mar 26 09:59:43 imap(testimap2.csia(a)unipd.it): Info: Mailbox deleted: extern Mar 26 09:59:44 imap(testimap2.csia(a)unipd.it): Info: Mailbox deleted: extern/subfolder Mar 26 09:59:44 imap(testimap2.csia(a)unipd.it): Info: Disconnected: Logged out in=162 out=704 Mar 26 09:59:44 imap-login: Info: Login: user=<testimap2.csia(a)unipd.it>, method=PLAIN, rip=147.162.10.141, lip=147.162.10.84, mpid=1778, session=<vUqqPC0SXACTogqN> Mar 26 09:59:44 script-login: Debug: Added userdb setting: mail_location=sdbox:/NAS1/unipd.it/mailbox/t/testimap2.csia@unipd.it/sdbox:INDEX=/INDEX1/unipd.it/t/testimap2.csia@unipd.it:ALT=/ALTSTORAGE1/unipd.it/t/testimap2.csia@unipd.it Mar 26 09:59:44 imap: Debug: Loading modules from directory: /usr/lib/dovecot/modules Mar 26 09:59:44 imap: Debug: Module loaded: /usr/lib/dovecot/modules/lib01_acl_plugin.so Mar 26 09:59:44 imap: Debug: Module loaded: /usr/lib/dovecot/modules/lib02_imap_acl_plugin.so Mar 26 09:59:44 imap: Debug: Module loaded: /usr/lib/dovecot/modules/lib02_lazy_expunge_plugin.so Mar 26 09:59:44 imap: Debug: Module loaded: /usr/lib/dovecot/modules/lib10_quota_plugin.so Mar 26 09:59:44 imap: Debug: Module loaded: /usr/lib/dovecot/modules/lib11_imap_quota_plugin.so Mar 26 09:59:44 imap: Debug: Module loaded: /usr/lib/dovecot/modules/lib15_notify_plugin.so Mar 26 09:59:44 imap: Debug: Module loaded: /usr/lib/dovecot/modules/lib20_listescape_plugin.so Mar 26 09:59:44 imap: Debug: Module loaded: /usr/lib/dovecot/modules/lib20_mail_log_plugin.so Mar 26 09:59:44 imap: Debug: Added userdb setting: mail_location=sdbox:/NAS1/unipd.it/mailbox/t/testimap2.csia@unipd.it/sdbox:INDEX=/INDEX1/unipd.it/t/testimap2.csia@unipd.it:ALT=/ALTSTORAGE1/unipd.it/t/testimap2.csia@unipd.it Mar 26 09:59:44 imap(testimap2.csia(a)unipd.it): Debug: Effective uid=1003, gid=1003, home=/SYSTEM/USERS/homes/unipd.it/t/testimap2.csia(a)unipd.it Mar 26 09:59:44 imap(testimap2.csia(a)unipd.it): Debug: acl: No acl_shared_dict setting - shared mailbox listing is disabled Mar 26 09:59:44 imap(testimap2.csia(a)unipd.it): Debug: Quota root: name=User quota backend=dict args=:file:/SYSTEM/USERS/homes/unipd.it/t/testimap2.csia@unipd.it/testimap2.csia@unipd.it.quota Mar 26 09:59:44 imap(testimap2.csia(a)unipd.it): Debug: Quota rule: root=User quota mailbox=* bytes=1153433600 messages=0 Mar 26 09:59:44 imap(testimap2.csia(a)unipd.it): Debug: Quota rule: root=User quota mailbox=Trash bytes=+104857600 messages=0 Mar 26 09:59:44 imap(testimap2.csia(a)unipd.it): Debug: Quota warning: bytes=1095761920 (95%) messages=0 reverse=no command=quota-warning 95 testimap2.csia(a)unipd.it Mar 26 09:59:44 imap(testimap2.csia(a)unipd.it): Debug: Quota warning: bytes=922746880 (80%) messages=0 reverse=no command=quota-warning 80 testimap2.csia(a)unipd.it Mar 26 09:59:44 imap(testimap2.csia(a)unipd.it): Debug: Quota grace: root=User quota bytes=115343360 (10%) Mar 26 09:59:44 imap(testimap2.csia(a)unipd.it): Debug: dict quota: user=testimap2.csia(a)unipd.it, uri=file:/SYSTEM/USERS/homes/unipd.it/t/testimap2.csia@unipd.it/testimap2.csia@unipd.it.quota, noenforcing=0 Mar 26 09:59:44 imap(testimap2.csia(a)unipd.it): Debug: Namespace inbox: type=private, prefix=, sep=/, inbox=yes, hidden=no, list=yes, subscriptions=yes location=sdbox:/NAS1/unipd.it/mailbox/t/testimap2.csia@unipd.it/sdbox:INDEX=/INDEX1/unipd.it/t/testimap2.csia@unipd.it:ALT=/ALTSTORAGE1/unipd.it/t/testimap2.csia@unipd.it Mar 26 09:59:44 imap(testimap2.csia(a)unipd.it): Debug: fs: root=/NAS1/unipd.it/mailbox/t/testimap2.csia(a)unipd.it/sdbox, index=/INDEX1/unipd.it/t/testimap2.csia(a)unipd.it, indexpvt=, control=, inbox=, alt=/ALTSTORAGE1/unipd.it/t/testimap2.csia(a)unipd.it Mar 26 09:59:44 imap(testimap2.csia(a)unipd.it): Debug: acl: initializing backend with data: vfile:/etc/dovecot/dovecot-acl Mar 26 09:59:44 imap(testimap2.csia(a)unipd.it): Debug: acl: acl username = testimap2.csia(a)unipd.it Mar 26 09:59:44 imap(testimap2.csia(a)unipd.it): Debug: acl: owner = 1 Mar 26 09:59:44 imap(testimap2.csia(a)unipd.it): Debug: acl vfile: Global ACL file: /etc/dovecot/dovecot-acl Mar 26 09:59:44 imap(testimap2.csia(a)unipd.it): Debug: Namespace : type=private, prefix=_PostaCancellataPerErrore/, sep=/, inbox=no, hidden=no, list=yes, subscriptions=yes location=maildir:/SYSTEM/USERS/mailbox/unipd.it/t/testimap2.csia@unipd.it/expunged Mar 26 09:59:44 imap(testimap2.csia(a)unipd.it): Debug: maildir++: root=/SYSTEM/USERS/mailbox/unipd.it/t/testimap2.csia(a)unipd.it/expunged, index=, indexpvt=, control=, inbox=, alt= Mar 26 09:59:44 imap(testimap2.csia(a)unipd.it): Debug: acl: initializing backend with data: vfile:/etc/dovecot/dovecot-acl Mar 26 09:59:44 imap(testimap2.csia(a)unipd.it): Debug: acl: acl username = testimap2.csia(a)unipd.it Mar 26 09:59:44 imap(testimap2.csia(a)unipd.it): Debug: acl: owner = 1 Mar 26 09:59:44 imap(testimap2.csia(a)unipd.it): Debug: acl vfile: Global ACL file: /etc/dovecot/dovecot-acl Mar 26 09:59:44 imap(testimap2.csia(a)unipd.it): Debug: acl vfile: file /NAS1/unipd.it/mailbox/t/testimap2.csia(a)unipd.it/sdbox/mailboxes/INBOX/dbox-Mails/dovecot-acl not found Mar 26 09:59:44 imap(testimap2.csia(a)unipd.it): Info: Disconnected: Logged out in=77 out=1009 Mar 26 10:01:50 imap(testimap2.csia(a)unipd.it): Debug: acl vfile: file /SYSTEM/USERS/mailbox/unipd.it/t/testimap2.csia(a)unipd.it/expunged/.INBOX\2eTrash/dovecot-acl not found Mar 26 10:01:51 imap(testimap2.csia(a)unipd.it): Debug: acl vfile: file /SYSTEM/USERS/mailbox/unipd.it/t/testimap2.csia(a)unipd.it/expunged/.\2eLEGGIMI/dovecot-acl not found Mar 26 10:01:51 imap(testimap2.csia(a)unipd.it): Debug: acl vfile: file /NAS1/unipd.it/mailbox/t/testimap2.csia(a)unipd.it/sdbox/mailboxes/INBOX.Trash/dbox-Mails/dovecot-acl not found Mar 26 10:01:51 imap-login: Info: Login: user=<testimap2.csia(a)unipd.it>, method=PLAIN, rip=147.162.200.67, lip=147.162.10.86, mpid=2474, session=<VWBCRC0SugCToshD> Mar 26 10:01:51 script-login: Debug: Added userdb setting: mail_location=sdbox:/NAS1/unipd.it/mailbox/t/testimap2.csia@unipd.it/sdbox:INDEX=/INDEX1/unipd.it/t/testimap2.csia@unipd.it:ALT=/ALTSTORAGE1/unipd.it/t/testimap2.csia@unipd.it Mar 26 10:01:51 imap: Debug: Loading modules from directory: /usr/lib/dovecot/modules Mar 26 10:01:51 imap: Debug: Module loaded: /usr/lib/dovecot/modules/lib01_acl_plugin.so Mar 26 10:01:51 imap: Debug: Module loaded: /usr/lib/dovecot/modules/lib02_imap_acl_plugin.so Mar 26 10:01:51 imap: Debug: Module loaded: /usr/lib/dovecot/modules/lib02_lazy_expunge_plugin.so Mar 26 10:01:51 imap: Debug: Module loaded: /usr/lib/dovecot/modules/lib10_quota_plugin.so Mar 26 10:01:51 imap: Debug: Module loaded: /usr/lib/dovecot/modules/lib11_imap_quota_plugin.so Mar 26 10:01:51 imap: Debug: Module loaded: /usr/lib/dovecot/modules/lib15_notify_plugin.so Mar 26 10:01:51 imap: Debug: Module loaded: /usr/lib/dovecot/modules/lib20_listescape_plugin.so Mar 26 10:01:51 imap: Debug: Module loaded: /usr/lib/dovecot/modules/lib20_mail_log_plugin.so Mar 26 10:01:51 imap: Debug: Added userdb setting: mail_location=sdbox:/NAS1/unipd.it/mailbox/t/testimap2.csia@unipd.it/sdbox:INDEX=/INDEX1/unipd.it/t/testimap2.csia@unipd.it:ALT=/ALTSTORAGE1/unipd.it/t/testimap2.csia@unipd.it Mar 26 10:01:51 imap(testimap2.csia(a)unipd.it): Debug: Effective uid=1003, gid=1003, home=/SYSTEM/USERS/homes/unipd.it/t/testimap2.csia(a)unipd.it Mar 26 10:01:51 imap(testimap2.csia(a)unipd.it): Debug: acl: No acl_shared_dict setting - shared mailbox listing is disabled Mar 26 10:01:51 imap(testimap2.csia(a)unipd.it): Debug: Quota root: name=User quota backend=dict args=:file:/SYSTEM/USERS/homes/unipd.it/t/testimap2.csia@unipd.it/testimap2.csia@unipd.it.quota Mar 26 10:01:51 imap(testimap2.csia(a)unipd.it): Debug: Quota rule: root=User quota mailbox=* bytes=1153433600 messages=0 Mar 26 10:01:51 imap(testimap2.csia(a)unipd.it): Debug: Quota rule: root=User quota mailbox=Trash bytes=+104857600 messages=0 Mar 26 10:01:51 imap(testimap2.csia(a)unipd.it): Debug: Quota warning: bytes=1095761920 (95%) messages=0 reverse=no command=quota-warning 95 testimap2.csia(a)unipd.it Mar 26 10:01:51 imap(testimap2.csia(a)unipd.it): Debug: Quota warning: bytes=922746880 (80%) messages=0 reverse=no command=quota-warning 80 testimap2.csia(a)unipd.it Mar 26 10:01:51 imap(testimap2.csia(a)unipd.it): Debug: Quota grace: root=User quota bytes=115343360 (10%) Mar 26 10:01:51 imap(testimap2.csia(a)unipd.it): Debug: dict quota: user=testimap2.csia(a)unipd.it, uri=file:/SYSTEM/USERS/homes/unipd.it/t/testimap2.csia@unipd.it/testimap2.csia@unipd.it.quota, noenforcing=0 Mar 26 10:01:51 imap(testimap2.csia(a)unipd.it): Debug: Namespace inbox: type=private, prefix=, sep=/, inbox=yes, hidden=no, list=yes, subscriptions=yes location=sdbox:/NAS1/unipd.it/mailbox/t/testimap2.csia@unipd.it/sdbox:INDEX=/INDEX1/unipd.it/t/testimap2.csia@unipd.it:ALT=/ALTSTORAGE1/unipd.it/t/testimap2.csia@unipd.it Mar 26 10:01:51 imap(testimap2.csia(a)unipd.it): Debug: fs: root=/NAS1/unipd.it/mailbox/t/testimap2.csia(a)unipd.it/sdbox, index=/INDEX1/unipd.it/t/testimap2.csia(a)unipd.it, indexpvt=, control=, inbox=, alt=/ALTSTORAGE1/unipd.it/t/testimap2.csia(a)unipd.it Mar 26 10:01:51 imap(testimap2.csia(a)unipd.it): Debug: acl: initializing backend with data: vfile:/etc/dovecot/dovecot-acl Mar 26 10:01:51 imap(testimap2.csia(a)unipd.it): Debug: acl: acl username = testimap2.csia(a)unipd.it Mar 26 10:01:51 imap(testimap2.csia(a)unipd.it): Debug: acl: owner = 1 Mar 26 10:01:51 imap(testimap2.csia(a)unipd.it): Debug: acl vfile: Global ACL file: /etc/dovecot/dovecot-acl Mar 26 10:01:51 imap(testimap2.csia(a)unipd.it): Debug: Namespace : type=private, prefix=_PostaCancellataPerErrore/, sep=/, inbox=no, hidden=no, list=yes, subscriptions=yes location=maildir:/SYSTEM/USERS/mailbox/unipd.it/t/testimap2.csia@unipd.it/expunged Mar 26 10:01:51 imap(testimap2.csia(a)unipd.it): Debug: maildir++: root=/SYSTEM/USERS/mailbox/unipd.it/t/testimap2.csia(a)unipd.it/expunged, index=, indexpvt=, control=, inbox=, alt= Mar 26 10:01:51 imap(testimap2.csia(a)unipd.it): Debug: acl: initializing backend with data: vfile:/etc/dovecot/dovecot-acl Mar 26 10:01:51 imap(testimap2.csia(a)unipd.it): Debug: acl: acl username = testimap2.csia(a)unipd.it Mar 26 10:01:51 imap(testimap2.csia(a)unipd.it): Debug: acl: owner = 1 Mar 26 10:01:51 imap(testimap2.csia(a)unipd.it): Debug: acl vfile: Global ACL file: /etc/dovecot/dovecot-acl Mar 26 10:01:51 imap(testimap2.csia(a)unipd.it): Debug: acl vfile: file /NAS1/unipd.it/mailbox/t/testimap2.csia(a)unipd.it/sdbox/mailboxes/INBOX.Trash/dbox-Mails/dovecot-acl not found Mar 26 10:01:51 imap(testimap2.csia(a)unipd.it): Debug: acl vfile: file /NAS1/unipd.it/mailbox/t/testimap2.csia(a)unipd.it/sdbox/mailboxes/Drafts/dbox-Mails/dovecot-acl not found Mar 26 10:01:52 imap(testimap2.csia(a)unipd.it): Debug: acl vfile: file /NAS1/unipd.it/mailbox/t/testimap2.csia(a)unipd.it/sdbox/mailboxes/Spam/dbox-Mails/dovecot-acl not found Mar 26 10:01:52 imap(testimap2.csia(a)unipd.it): Debug: acl vfile: file /NAS1/unipd.it/mailbox/t/testimap2.csia(a)unipd.it/sdbox/mailboxes/Templates/dbox-Mails/dovecot-acl not found

1 0

Re: Dovecot Oy merger with Open-Xchange AG
by Patrick Coffin 25 Mar '15

25 Mar '15

To Timo and the Dovecot guys - congratulations! I'm sure this merger with OpenXchange is going to provide you with a lot of resources and opportunities. As a longtime user of dovecot, I do have a few concerns. I wonder if you can answer some questions for me. You say that OpenXchange really likes open source and shares your plans for the future. Is this a commitment that future versions core dovecot product will remain free and truly open source? According to Wikipedia (http://en.wikipedia.org/wiki/Open-Xchange#Licensing <http://en.wikipedia.org/wiki/Open-Xchange#Licensing>) , OpenXchange's backend is GPL'd, but the front-end is not - it's released under "Creative Common's Share Alike, Non Commercial, Attribution". The article points out: "The restriction to Non Commercial in the Creative Commons license for the Frontend restricts re-distribution to third parties, i.e. hosted deployments for third parties. However, since the front-end license prohibits commercial re-distribution, the software is neither free software nor open source software since the definitions of both require such re-distribution to be permitted" Do you expect that dovecot is moving in that direction? Here's why I'm asking: As a hosted email provider, I've long used dovecot, and been quite happy with it. But I have some concerns, as is common when any popular open source project gets acquired by a commercial entitiy. The current dovecot license is a mixture of the MIT and LGPL licenses. Will this remain? Or is dovecot going to go the way of OpenXchange licensing? What about other pieces of the dovecot ecosystem, such as the Object Storage plugin - will that remain closed source and proprietary? Or will you follow the lead of companies like RedHat and be truly open source? Is there a possibility that future versions of dovecot that contain what we might consider core features will be available only in the commercial version of the product? If I base a part of my business on a piece of software I've been running for the last 10 years, am I going to find myself in trouble in a year or two, when some new version of dovecot comes out with changes that I need, and I have to move to a commercial product, which I may or may not be able to afford? I'd love to hear that you're going to be following a model like RedHat did when they acquired GlusterFS and created the RedHat Storage Server. Gluster development is still going strong, and still completely open source. But they make money from people like me who know that by buying a contract, we can get the kind of support we need for such a critical part of our infrastructure. Again, congratulations and, as always, thanks for all the hard work creating dovecot in the first place. Patrick

7 13

Upgrading a dovecot director configuration?
by Will Rouesnel 25 Mar '15

25 Mar '15

Is Dovecot Director compatible across Dovecot versions? i.e. 2.0.x to 2.1.x or 2.2.x? I have a 6 host cluster in a director configuration which is getting somewhat aged, but it would be very beneficial if the director hosts could be upgraded seamlessly. Is such a thing possible, or will their be compatibility issues? Would a workaround be possible (i.e. migrate to a user system which enforces proxy destinations by another means, then do an upgrade?)

1 0

Fixing broken UTF-8 handling with MySQL driver
by Felix Zandanel 23 Mar '15

23 Mar '15

Hi, I noticed that dovecot's MySQL driver doesn't play well with UTF-8 encoded strings. I presume this issue has been around for a while. However, it still fails with the current release candidate 2.2.16-rc1. I have been using the sieve extdata plugin with a MySQL-backed dict to retrieve a folder name that is then passed to fileinto: fileinto :create "${extdata.folder_name_drafts}"; Whenever this dict returned a string with non-7byte characters, a line such as the following popped up in sieve.log. (This example query should return "Entwürfe".) error: folder name specified for fileinto command is not utf-8: Entw?rfe. Although my MySQL installation is set up to use UTF-8 as the default charset on every level (config, database, table and field), and the character_set_* runtime variables all yield the value "utf8", it still seems that the mysql client library must be instructed to actually use UTF-8 explicitly. Adding the following statement to driver_mysql_connect() fixes the issue for me: mysql_options(db->mysql, MYSQL_SET_CHARSET_NAME, "utf8"); I checked this against mysql 5.5.41. Regards, Felix

2 2

[PATCH] increase fd_limit to max_client_limit automatically
by Lauri Tirkkonen 23 Mar '15

23 Mar '15

Hi, with a low soft limit on file descriptors, dovecot 2.2.15 warns on startup: Warning: fd limit (ulimit -n) is lower than required under max. load (256 < 1000), because of default_client_limit It could try increasing the limit first, and only report the warning if that fails. I'm attaching a patch that does just this. Without the patch, the soft fd limit is kept at whatever it was on dovecot startup: % pfexec plimit $(pgrep dovecot) 18737: /opt/niksula/sbin/dovecot resource current maximum time(seconds) unlimited unlimited file(blocks) unlimited unlimited data(kbytes) unlimited unlimited stack(kbytes) 10240 unlimited coredump(blocks) unlimited unlimited nofiles(descriptors) 256 65536 vmemory(kbytes) unlimited unlimited and with patch applied, it's increased to max_client_limit: % pfexec plimit $(pgrep dovecot) 18775: /opt/niksula/sbin/dovecot resource current maximum time(seconds) unlimited unlimited file(blocks) unlimited unlimited data(kbytes) unlimited unlimited stack(kbytes) 10240 unlimited coredump(blocks) unlimited unlimited nofiles(descriptors) 1000 65536 vmemory(kbytes) unlimited unlimited It should probably be increased to higher than that to account for fds other than client sockets, but I don't have insights into that. -- Lauri Tirkkonen Niksula systems specialist

2 2

Re: fast doveadm search results
by Joseph Tam 23 Mar '15

23 Mar '15

Steffen Kaiser writes: > e.g. put message-id into mail_always_cache_fields > > - From http://dovecot.org/pipermail/dovecot-cvs/2013-May/023261.html > > lib-storage: Allow mail_*cache_fields settings to specify any hdr.* fields ... but I belatedly wrote ... > Maybe you can even add these items into the cache upon delivery, > but someone more knowlegable than I would have to help you with that. The drawback of getting thing in digest form -- you look like a boob when answering late. I defer to Steffen's superior knowledge. Joseph Tam <jtam.home(a)gmail.com>

3 3

2.2.16 link failure on FreeBSD 10.1, with patch
by Jan Mikkelsen 22 Mar '15

22 Mar '15

Hi, Compiling on FreeBSD 10.1 gives linker errors when linking test-message-snippet. The underlying problem is that libiconv appears on the actual linker line after libcharset.a, which leads to unresolved libiconv symbols. This build process worked fine with 2.2.15. The patch below to src/lib-charset/Makefile.in resolves the problem for me and seems broadly correct. libcharset.a does depend on libiconv so it should probably be declared that way. There is probably a more correct way to make the patch to Makefile.am, but I don't really use automake. Hopefully helpful to someone. Jan Mikkelsen. Patch: --- dovecot-2.2.16/src/lib-charset/Makefile.in 2015-03-13 02:41:16.000000000 +1100 +++ dovecot-2.2.16.new/src/lib-charset/Makefile.in 2015-03-21 13:58:21.951293274 +1100 @@ -92,7 +92,7 @@ CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = LTLIBRARIES = $(noinst_LTLIBRARIES) -libcharset_la_LIBADD = +libcharset_la_LIBADD = $(LTLIBICONV) am_libcharset_la_OBJECTS = charset-iconv.lo charset-utf8.lo libcharset_la_OBJECTS = $(am_libcharset_la_OBJECTS) AM_V_lt = $(am__v_lt_@AM_V@) Error messages: libtool: link: cc -std=gnu99 -I/usr/local/include -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -Wno-duplicate-decl-specifier -Wstrict-aliasing=2 -Wl,--as-needed -o test-message-snippet test-message-snippet.o .libs/message-snippet.o .libs/mail-html2text.o .libs/message-decoder.o .libs/quoted-printable.o .libs/rfc822-parser.o .libs/rfc2231-parser.o /usr/local/lib/libiconv.so -Wl,-rpath -Wl,/usr/local/lib .libs/message-parser.o .libs/message-header-parser.o .libs/message-header-decode.o .libs/message-size.o -L/usr/local/lib ../lib-charset/.libs/libcharset.a ../lib-test/.libs/libtest.a ../lib/.libs/liblib.a ../lib-charset/.libs/libcharset.a(charset-iconv.o): In function `charset_to_utf8_begin': charset-iconv.c:(.text+0x49): undefined reference to `libiconv_open' ../lib-charset/.libs/libcharset.a(charset-iconv.o): In function `charset_to_utf8_end': charset-iconv.c:(.text+0x151): undefined reference to `libiconv_close' ../lib-charset/.libs/libcharset.a(charset-iconv.o): In function `charset_to_utf8_reset': charset-iconv.c:(.text+0x211): undefined reference to `libiconv' ../lib-charset/.libs/libcharset.a(charset-iconv.o): In function `charset_to_utf8_try': charset-iconv.c:(.text+0x425): undefined reference to `libiconv' cc: error: linker command failed with exit code 1 (use -v to see invocation) ../lib-charset/.libs/libcharset.a(charset-iconv.o): In function `charset_to_utf8_begin': charset-iconv.c:(.text+0x49): undefined reference to `libiconv_open' ../lib-charset/.libs/libcharset.a(charset-iconv.o): In function `charset_to_utf8_end': charset-iconv.c:(.text+0x151): undefined reference to `libiconv_close' ../lib-charset/.libs/libcharset.a(charset-iconv.o): In function `charset_to_utf8_reset': charset-iconv.c:(.text+0x211): undefined reference to `libiconv' ../lib-charset/.libs/libcharset.a(charset-iconv.o): In function `charset_to_utf8_try': charset-iconv.c:(.text+0x425): undefined reference to `libiconv'

1 0

Transitioning from version 1 to version 2
by Steve Matzura 21 Mar '15

21 Mar '15

I'm wrestling with transitioning from a 1.0.15 system to a 2.2.25 system. The old dovecot.conf cannot be dropped into position on the new system because so many config options and symbols have changed. It seems every time I change something to match the new formats, I break something else! Anyone out there have maybe half an hour to spare to look at my old and new files to help me whip them into shape?

1 0

FreeBSD ZFS maildir to mdbox
by Roland van Laar 21 Mar '15

21 Mar '15

Hello, I'm converting my mailbox from Maildir to mdbox.. The Maildir is from an 1.2 server. The new server is a virtual FreeBSD ZFS server. The conversion is not working, I'm getting either segfaults or the sync just quits with errors. I also did set with mmap_disable=yes. This didn't resolve the problem. How can I fix this? The same conversion on a virtual ubuntu 14.04 box works with mentions of "filename has the wrong S value" and Corrupted index errors. The FreeBSD errors and dovecot -n are included below: dsync(vagrant): Error: read(./Maildir/cur/1296038598.29562.mail.micite.net,S=20542:2,Sa) failed: Cached message size smaller than expected (20542 < 20640, box=INBOX, UID=475) dsync(vagrant): Error: Maildir filename has wrong S value, renamed the file from ./Maildir/cur/1296038598.29562.mail.micite.net,S=20542:2,Sa to ./Maildir/cur/1296038598.29562.mail.micite.net,S=20640:2,Sa dsync(vagrant): Error: Corrupted index cache file ./Maildir/dovecot.index.cache: Broken physical size for mail UID 475 dsync(vagrant): Error: write(/home/vagrant/mdbox/storage/m.12) failed: Invalid argument dsync(vagrant): Error: copy: i_stream_read(./Maildir/cur/1296038598.29562.mail.micite.net,S=20542:2,Sa) failed: Cached message size smaller than expected (20542 < 20640, box=INBOX, UID=475) dsync(vagrant): Error: read(./Maildir/cur/1296038598.29562.mail.micite.net,S=20542:2,Sa) failed: Cached message size smaller than expected (20542 < 20640, box=INBOX, UID=475) (uid=475, box=INBOX) dsync(vagrant): Error: Mailbox INBOX: read(msg input) failed: Cached message size smaller than expected (20542 < 20640, box=INBOX, UID=475) dsync(vagrant): Error: read(./Maildir/cur/1296038598.29562.mail.micite.net,S=20542:2,Sa) failed: Cached message size smaller than expected (20542 < 20640, box=INBOX, UID=475) (uid=475, box=INBOX) dsync(vagrant): Panic: file mail-index-transaction-update.c: line 964 (mail_index_update_ext): assertion failed: (seq > 0 && (seq <= mail_index_view_get_messages_count(t->view) || seq <= t->last_new_seq)) Abort (core dumped) (gdb) core doveadm.core Core was generated by `doveadm'. Program terminated with signal 6, Aborted. #0 0x00000008013f8a1a in ?? () (gdb) bt #0 0x00000008013f8a1a in ?? () #1 0x00000008013f7149 in ?? () #2 0x0000000000000000 in ?? () or with no core dump: % doveadm sync maildir:./Maildir dsync(vagrant): Error: read(./Maildir/cur/1296466748.64525.mail.micite.net,S=7629:2,Sa) failed: Cached message size smaller than expected (7629 < 7694, box=INBOX, UID=899) dsync(vagrant): Error: Maildir filename has wrong S value, renamed the file from ./Maildir/cur/1296466748.64525.mail.micite.net,S=7629:2,Sa to ./Maildir/cur/1296466748.64525.mail.micite.net,S=7694:2,Sa dsync(vagrant): Error: Corrupted index cache file ./Maildir/dovecot.index.cache: Broken physical size for mail UID 899 dsync(vagrant): Error: write(/home/vagrant/mdbox/storage/m.11) failed: Invalid argument dsync(vagrant): Error: copy: i_stream_read(./Maildir/cur/1296466748.64525.mail.micite.net,S=7629:2,Sa) failed: Cached message size smaller than expected (7629 < 7694, box=INBOX, UID=899) dsync(vagrant): Error: read(./Maildir/cur/1296466748.64525.mail.micite.net,S=7629:2,Sa) failed: Cached message size smaller than expected (7629 < 7694, box=INBOX, UID=899) (uid=899, box=INBOX) dsync(vagrant): Error: Mailbox INBOX: read(msg input) failed: Cached message size smaller than expected (7629 < 7694, box=INBOX, UID=899) dsync(vagrant): Error: read(./Maildir/cur/1296466748.64525.mail.micite.net,S=7629:2,Sa) failed: Cached message size smaller than expected (7629 < 7694, box=INBOX, UID=899) (uid=899, box=INBOX) % dovecot -n # 2.2.16: /usr/local/etc/dovecot/dovecot.conf # OS: FreeBSD 10.1-RELEASE-p6 amd64 mail_location = mdbox:~/mdbox namespace { inbox = yes location = prefix = separator = . } passdb { args = /usr/local/etc/dovecot/conf.d/dovecot-sql.conf.ext driver = sql } protocols = lmtp imap service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0600 user = postfix } user = vmail } ssl = required ssl_cert = </etc/ssl/ec/ec.crt ssl_key = </etc/ssl/ec/ec.key userdb { args = /usr/local/etc/dovecot/conf.d/dovecot-sql.conf.ext driver = sql } protocol lmtp { postmaster_address = postmaster(a)micite.net }

2 2

imap-login SSLv3 causes signal 11, core dump and DoS. ssl_protocols = ??
by James 21 Mar '15

21 Mar '15

Connecting to dovecot with ssl3 causes imap-login to die: $ openssl s_client -connect localhost:993 -ssl3 CONNECTED(00000003) 4277630796:error:14094410:SSL routines:ssl3_read_bytes:sslv3 alert handshake failure:s3_pkt.c:1461:SSL alert number 40 4277630796:error:1409E0E5:SSL routines:ssl3_write_bytes:ssl handshake failure:s3_pkt.c:645: --- no peer certificate available --- No client certificate CA names sent --- SSL handshake has read 7 bytes and written 0 bytes --- New, (NONE), Cipher is (NONE) Secure Renegotiation IS NOT supported Compression: NONE Expansion: NONE No ALPN negotiated SSL-Session: Protocol : SSLv3 Cipher : 0000 Session-ID: Session-ID-ctx: Master-Key: Key-Arg : None PSK identity: None PSK identity hint: None SRP username: None Start Time: 1426851034 Timeout : 7200 (sec) Verify return code: 0 (ok) --- syslog: Mar 20 11:30:35 MAILHOST dovecot: [ID 583609 mail.crit] imap-login: Fatal: master: service(imap-login): child 21918 killed with signal 11 (core dumped) [last ip=127.0.0.1] dovecot.conf had: ssl_protocols = !SSLv2 !SSLv3 removing that line stops the core dump and syslog then shows: Mar 20 11:36:25 MAILHOST dovecot: [ID 583609 mail.info] imap-login: Disconnected (disconnected before auth was ready, waited 0 secs): user=<>, rip=127.0.0.1, lip=127.0.0.1, TLS handshaking: SSL_accept() failed: error:14076102:SSL routines:SSL23_GET_CLIENT_HELLO:unsupported protocol, session=<eqr1ubYRWgB/AAAB> the "SSL23_GET_CLIENT_HELLO:unsupported protocol" seems to do what I thought the ssl_protocols setting did. Do I still need, if I ever needed, the "ssl_protocols = " setting? James. # dovecot -n # 2.2.16: /etc/opt/XXXX/dovecot/dovecot.conf # Pigeonhole version 0.4.7 # OS: SunOS 5.10 i86pc auth_mechanisms = plain login digest-md5 cram-md5 base_dir = /var/opt/XXXX/dovecot/ lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes login_trusted_networks = 111.222.333.444/24 mail_gid = vmail mail_home = /XXXXXX/XXXX/%d/%n mail_location = maildir:/XXXXX/XXXX/%d/%n/Maildir mail_max_userip_connections = 20 mail_plugins = quota mail_uid = vmail mailbox_idle_check_interval = 10 secs managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate passdb { args = /etc/opt/XXXX/dovecot/dovecot-sql.conf driver = sql } plugin { fts_autoindex = yes quota = maildir:User quota quota_rule = *:storage=1G quota_rule2 = Trash:storage=+10% quota_warning = storage=90%% quota-warning 90 %u quota_warning2 = storage=95%% quota-warning 95 %u quota_warning3 = storage=99%% quota-warning 99 %u sieve = /XXXXX/XXXX/%d/%n/dovecot.sieve sieve_dir = /XXXXX/XXXX/%d/%n/sieve } protocols = imap lmtp sieve service auth { drop_priv_before_exec = yes unix_listener auth-client { mode = 0660 } unix_listener auth-master { mode = 0600 } user = root } service imap-login { chroot = drop_priv_before_exec = yes executable = imap-login -D service_count = 1 user = dovecot } service lmtp { group = vmail unix_listener lmtp { mode = 0666 } user = vmail } service quota-warning { executable = script /etc/opt/XXXX/dovecot/quota-warning user = vmail } ssl_cert = </etc/opt/XXXX/dovecot/dovecot.pem ssl_cipher_list = AES128+EECDH:AES128+EDH ssl_key = </etc/opt/XXXX/dovecot/dovecot.pem ssl_prefer_server_ciphers = yes ssl_protocols = !SSLv2 !SSLv3 userdb { driver = prefetch } userdb { args = /etc/opt/XXXX/dovecot/dovecot-sql.conf driver = sql } protocol lda { auth_socket_path = /var/opt/XXXX/dovecot/auth-master mail_plugins = quota sieve postmaster_address = postmaster@XXXXXXXX sendmail_path = /opt/XXXX/sbin/exim } protocol pop3 { mail_plugins = quota } protocol imap { mail_plugins = quota imap_quota } protocol lmtp { mail_plugins = quota sieve postmaster_address = postmaster@XXXXXX sendmail_path = /opt/XXXX/sbin/exim }

3 9

Strange empty folders 1 1 1 1 1
by Samuel Williams 20 Mar '15

20 Mar '15

I just updated to the latest dovecot from 1.2 and it has been working great for most of my clients. But one client,who is using Outlook, has found that hundreds of folders have been created, e.g. admin@domain Deleted Items 1 admin@domain Deleted Items 1 1 admin@domain Deleted Items 1 1 1 .... admin@domain Deleted Items 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 This appears to be affecting all folders in his account, across multiple accounts for his domain. It isn't affecting any other user, even other users using outlook. All the folders are empty. Just wondering if anyone has any suggestions or ideas why this is happening. Thanks Samuel

1 0

fast sync vs. full sync
by Patrick Westenberg 20 Mar '15

20 Mar '15

Hi everyone, can anybody explain the difference between Dovecots fast sync and full sync in replication mode? Regards Patrick

2 1

indexer-worker panics with latest mercurial
by Laeeth Isharc 20 Mar '15

20 Mar '15

Hi. I am seeing the following in my logs. Happy to downgrade to an earlier version if you think this might be the problem, but dovecot.org is extremely slow (and has been for months) so I found it easier just to pull the latest from mercurial. Thanks. Laeeth Mar 12 20:48:39 indexer: Error: Indexer worker disconnected, discarding 1 reques ts for laeeth(a)laeeth.com Mar 12 20:48:39 indexer-worker(laeeth(a)laeeth.com): Fatal: master: service(indexe r-worker): child 24003 killed with signal 6 (core dumps disabled) Mar 12 20:49:01 dsync-local(laeeth(a)laeeth.com): Error: Couldn't lock /home/mail/ laeeth_laeeth_com/.dovecot-sync.lock: Timed out after 30 seconds Mar 12 20:49:16 indexer-worker(laeeth(a)laeeth.com): Error: fts_tika: PUT http://l ocalhost:9997/tika/ failed: 500 Server Error Mar 12 20:49:17 indexer-worker(rosie(a)kaleidicassociates.com): Warning: I/O leak: 0x7fc47d60fcf0 (line 127, fd 25) Mar 12 20:49:17 indexer-worker(rosie(a)kaleidicassociates.com): Panic: file ioloop .c: line 39 (io_add_file): assertion failed: (callback != NULL) Mar 12 20:49:17 indexer-worker(rosie(a)kaleidicassociates.com): Error: Raw backtrace: /usr/lib64/dovecot/libdovecot.so.0(+0x76c40) [0x7fc47d63fc40] -> /usr/lib64/dovecot/libdovecot.so.0(+0x76d1e) [0x7fc47d63fd1e] -> /usr/lib64/dovecot/libdovecot.so.0(i_fatal+0) [0x7fc47d5f02e5] -> /usr/lib64/dovecot/libdovecot.so.0(+0x87bd0) [0x7fc47d650bd0] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_move_io+0x3e) [0x7fc47d65183e] -> /usr/lib64/dovecot/libdovecot.so.0(connection_switch_ioloop+0x14) [0x7fc47d63db14] -> /usr/lib64/dovecot/libdovecot.so.0(http_client_switch_ioloop+0x28) [0x7fc47d614448] -> /usr/lib64/dovecot/libdovecot.so.0(+0x43876) [0x7fc47d60c876] -> /usr/lib64/dovecot/lib21_fts_solr_plugin.so(solr_connection_post_more+0x29) [0x7fc47c733159] -> /usr/lib64/dovecot/lib21_fts_solr_plugin.so(+0x3637) [0x7fc47c72f637] -> /usr/lib64/dovecot/lib20_fts_plugin.so(+0x6d83) [0x7fc47cf5dd83] -> /usr/lib64/dovecot/lib20_fts_plugin.so(fts_build_mail+0x614) [0x7fc47cf5e3c4] -> /usr/lib64/dovecot/lib20_fts_plugin.so(+0xc14e) [0x7fc47cf6314e] -> /usr/lib64/dovecot/libdovecot-storage.so.0(mail_precache+0x19) [0x7fc47d8ef429] -> dovecot/indexer-worker() [0x40237c] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_call_io+0x4c) [0x7fc47d65155c] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_handler_run_internal+0xbb) [0x7fc47d65249b] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_handler_run+0x9) [0x7fc47d6515c9] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_run+0x38) [0x7fc47d651648] -> /usr/lib64/dovecot/libdovecot.so.0(master_service_run+0x13) [0x7fc47d5f5703] -> dovecot/indexer-worker(main+0xcb) [0x401e7b] -> /lib64/libc.so.6(__libc_start_main+0xf5) [0x32c6021d65] -> dovecot/indexer-worker() [0x401f25] Mar 12 20:49:17 indexer: Error: Indexer worker disconnected, discarding 15 reque sts for rosie(a)kaleidicassociates.com Mar 12 20:49:17 indexer-worker(rosie(a)kaleidicassociates.com): Fatal: master: service(indexer-worker): child 24022 killed with signal 6 (core dumps disabled) Mar 12 20:49:17 indexer-worker(laeeth(a)kaleidicassociates.com): Warning: I/O leak: 0x7f22c4d4dcf0 (line 127, fd 23) Mar 12 20:49:17 indexer-worker(laeeth(a)kaleidicassociates.com): Panic: file ioloop.c: line 829 (io_loop_move_io): assertion failed: ((old_io->condition & IO_NOTIFY) == 0) Mar 12 20:49:17 indexer-worker(laeeth(a)kaleidicassociates.com): Error: Raw backtrace: /usr/lib64/dovecot/libdovecot.so.0(+0x76c40) [0x7f22c4d7dc40] -> /usr/lib64/dovecot/libdovecot.so.0(+0x76d1e) [0x7f22c4d7dd1e] -> /usr/lib64/dovecot/libdovecot.so.0(i_fatal+0) [0x7f22c4d2e2e5] -> /usr/lib64/dovecot/libdovecot.so.0(+0x888ba) [0x7f22c4d8f8ba] -> /usr/lib64/dovecot/libdovecot.so.0(connection_switch_ioloop+0x14) [0x7f22c4d7bb14] -> /usr/lib64/dovecot/libdovecot.so.0(http_client_switch_ioloop+0x28) [0x7f22c4d52448] -> /usr/lib64/dovecot/libdovecot.so.0(+0x43876) [0x7f22c4d4a876] -> /usr/lib64/dovecot/lib21_fts_solr_plugin.so(solr_connection_post_more+0x29) [0x7f22c3e71159] -> /usr/lib64/dovecot/lib21_fts_solr_plugin.so(+0x3637) [0x7f22c3e6d637] -> /usr/lib64/dovecot/lib20_fts_plugin.so(+0x6d83) [0x7f22c469bd83] -> /usr/lib64/dovecot/lib20_fts_plugin.so(fts_build_mail+0x123) [0x7f22c469bed3] -> /usr/lib64/dovecot/lib20_fts_plugin.so(+0xc14e) [0x7f22c46a114e] -> /usr/lib64/dovecot/libdovecot-storage.so.0(mail_precache+0x19) [0x7f22c502d429] -> dovecot/indexer-worker() [0x40237c] -> /usr/lib64/dovecot/libdovecot.so.0(io _loop_call_io+0x4c) [0x7f22c4d8f55c] -> /usr/lib64/dovecot/libdovecot.s o.0(io_loop_handler_run_internal+0xbb) [0x7f22c4d9049b] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_handler_run+0x9) [0x7f22c4d8f5c9] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_run+0x38) [0x7f22c4d8f648] -> /usr/lib64/dovecot/libdovecot.so.0(master_service_run+0x13) [0x7f22c4d33703] -> dovecot/indexer-worker(main+0xcb) [0x401e7b] -> /lib64/libc.so.6(__libc_start_main+0xf5) [0x32c6021d65] -> dovecot/indexer-worker() [0x401f25] Mar 12 20:49:17 indexer: Error: Indexer worker disconnected, discarding 6 requests for laeeth(a)kaleidicassociates.com Mar 12 20:49:17 indexer-worker(laeeth(a)kaleidicassociates.com): Fatal: master: service(indexer-worker): child 24020 killed with signal 6 (core dumps disabled) Mar 12 20:49:26 indexer-worker(laeeth(a)laeeth.com): Warning: I/O leak: 0x7f0d5aa00cf0 (line 127, fd 23) Mar 12 20:49:26 indexer-worker(laeeth(a)laeeth.com): Panic: file ioloop-iolist.c: line 22: unreached Mar 12 20:49:26 indexer-worker(laeeth(a)laeeth.com): Error: Raw backtrace: /usr/lib64/dovecot/libdovecot.so.0(+0x76c40) [0x7f0d5aa30c40] -> /usr/lib64/dovecot/libdovecot.so.0(+0x76d1e) [0x7f0d5aa30d1e] -> /usr/lib64/dovecot/libdovecot.so.0(i_fatal+0) [0x7f0d5a9e12e5] -> /usr/lib64/dovecot/libdovecot.so.0(+0x88a0d) [0x7f0d5aa42a0d] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_handle_add+0x3b) [0x7f0d5aa4319b] -> /usr/lib64/dovecot/libdovecot.so.0(+0x87b61) [0x7f0d5aa41b61] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_move_io+0x3e) [0x7f0d5aa4283e] -> /usr/lib64/dovecot/libdovecot.so.0(connection_switch_ioloop+0x14) [0x7f0d5aa2eb14] -> /usr/lib64/dovecot/libdovecot.so.0(http_client_switch_ioloop+0x28) [0x7f0d5aa0

2 1

[Dovecot] imapc - different settings for different namespaces
by Timo Sirainen 20 Mar '15

20 Mar '15

Originally I was planning on allowing all kinds of mail settings inside namespace {}, including imapc_* settings. But that's a bit difficult to implement (although I think it will happen some day). So for now I was thinking: imapc foo { host = imap.foo.com master_user = foomaster password = foopass } imapc bar { host = imap.bar.com ... } namespace { prefix = foo/ location = imapc:foo } namespace { prefix = bar/ location = imapc:bar } So basically if the path after imapc isn't absolute (/path or ~/path), then treat the path as the imapc section name and use its settings. Anyone have any improvement suggestions? I was planning on adding this to v2.2.3. I'm not sure if the section names should be "imapc" or something else (e.g. imap_remote {}).

2 2

core not dumped
by James 20 Mar '15

20 Mar '15

There is some underlying problem with imap-login but in order to debug it I'd like to see a core file. On error dovecot reports "core not dumped". If I put "abort()" in the code at the point it is reporting then a core file is written, so there is no OS reason why a core can not be written. It appears to be dovecot's choice to control the child. In an attempt to obtain a core file I have: service imap-login { chroot = drop_priv_before_exec = yes user = dovecot } How can I make imap-login to produce a core file? Syslog error report: Mar 18 09:22:28 MAILHOST dovecot: [ID 583609 mail.crit] imap-login: Fatal: master: service(imap-login): child 10812 killed with signal 11 (core not dumped) [last ip=111.222.333.444] Should anyone care at this point (before I've looked at a core file) the error is related to; imap-login: Disconnected (no auth attempts in 0 secs): user=<>, James.

3 4

Re: fast doveadm search results
by Joseph Tam 20 Mar '15

20 Mar '15

Vu Ngoc VU <vvu(a)mcra.fr> writes: > My goal is to be able to find mails quickly with "doveadm search". > We are using dovecot in a corporate. And some managers, sometimes ask to delete some messages. > These messages are "unwanted" ones: mistakenly sent, defamatory... > > So, that situations appear rarely, but when asked, they expected me to > deleted quickly these messages from few to thousands of users > mailboxes. > > Is that possible to change behaviour of Dovecot, some headers like > sender, message-id, date are stored in cache for at least 48h? (7 days > would be better). So is this a fair summary of what you are asking: you want to load dovecot's caches with searchable items (i.e. specified headers) *and* have them expire and removed from caches after a preset amount of time? Caches are persistent: once an item is cached, it stays in the cache. I can't think of a good way to purge them without a lot of bother, but maybe you don't really need this. If you want to preload the cache with searchable items, you can periodically run a search/fetch command, which will load the cache with headers you want. http://www.dovecot.org/list/dovecot/2010-October/053521.html Maybe you can even add these items into the cache upon delivery, but someone more knowlegable than I would have to help you with that. The FTS/Solr plugin might also help. You seem to be optimizing the wrong problem. Reading between the lines of your message, your management wants a technical solution to a human problem (someone did an oops). Joseph Tam <jtam.home(a)gmail.com>

1 0

Released Pigeonhole v0.4.7 for Dovecot v2.2.16
by Stephan Bosch 20 Mar '15

20 Mar '15

Hello Dovecot users, Here is the final 0.4.7 release. No changes were committed since the last release candidate. Changelog v0.4.7: * editheader extension: Made protection against addition and deletion of headers configurable separately. Also, the `Received' and `Auto-Submitted' headers are no longer protected against addition by default. * Turned message envelope address parse errors into warnings. * The interpreter now accepts non-standard domain names, e.g. containing '_'. + Implemented the Sieve index extension (RFC 5260). + Implemented support for the mboxmetadata and servermetadata extensions (RFC 5490). + Implemented new sieve commands for the doveadm command line utility. These commands are currently limited to ManageSieve operations, but the other current sieve tools will be migrated to doveadm in the near future as well. + Added more debug output about binary up-to-date checking. + Added script metadata to binary dump output. - Fixed Sieve script binary up-to-date checking by normalizing the script location. - The Sieve interpreter now flushes the duplicate database during start phase of result execution rather than commit phase. This makes sure locks on the duplicate database are released as soon as possible, preventing contention. - Performed a few optimizations in the lexical scanner of the language. - Fixed bug in `:matches' match-type that made a pattern without wildcards match as if there were a '*' at the beginning. - Fixed crash in validation of the string parameter of the comparator tag. - extprograms extension: Made sure supplemental group privileges are also dropped. This was a problem reported by Debian lintian. - Fixed bug in handling of binary errors for action side-effects and message overrides. - file script storage: Restructured storage initialization to address backwards compatibility issues. - dict script storage: Fixed small memory allocation bug. The release is available as follows: http://pigeonhole.dovecot.org/releases/2.2/dovecot-2.2-pigeonhole-0.4.7.tar… http://pigeonhole.dovecot.org/releases/2.2/dovecot-2.2-pigeonhole-0.4.7.tar… Refer to http://pigeonhole.dovecot.org and the Dovecot v2.x wiki for more information. Have fun testing this new release and don't hesitate to notify me when there are any problems. Regards, -- Stephan Bosch stephan(a)rename-it.nl

1 0

check if anvil is working
by Leonardo Rodrigues 19 Mar '15

19 Mar '15

Hi, Is there any way of making sure the anvil service, used to penalty login fails, is working ? I dont see anything on the logs regarding it neither have it configured. It's not on my configuration files, but it can be seen on a 'dovecot -a' dump. Should it be logging something ? Should i have enabled it somehow ? Thanks for the answers. [root@correio log]# dovecot --version 2.2.13 (from dovecot -a dump) service anvil { chroot = empty client_limit = 0 drop_priv_before_exec = no executable = anvil extra_groups = group = idle_kill = 4294967295 secs privileged_group = process_limit = 1 process_min_avail = 1 protocol = service_count = 0 type = anvil unix_listener anvil-auth-penalty { group = mode = 0600 user = } unix_listener anvil { group = mode = 0600 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } -- Atenciosamente / Sincerily, Leonardo Rodrigues Solutti Tecnologia http://www.solutti.com.br Minha armadilha de SPAM, NÃO mandem email gertrudes(a)solutti.com.br My SPAMTRAP, do not email it

1 0

fast doveadm search results
by Vu Ngoc VU 19 Mar '15

19 Mar '15

hello, I've posted same question here months ago. But obtaine no answer, even not a "you question is stupid". So I don't know what to think about that. My goal is to be able to find mails quickly with "doveadm search". We are using dovecot in a corporate. And some managers, sometimes ask to delete some messages. These messages are "unwanted" ones: mistakenly sent, defamatory... So, that situations appear rarely, but when asked, they expected me to deleted quickly these messages from few to thousands of users mailboxes. Is that possible to change behaviour of Dovecot, some headers like sender, message-id, date are stored in cache for at least 48h? (7 days would be better). I've read this page : http://wiki2.dovecot.org/Design/Indexes/Cache but cannot understand every parts. "A specific decision can be forced by ORing it with MAIL_CACHE_DECISION_FORCED." Is OR in this sentence like AND/OR comparators? Where to put "MAIL_CACHE_DECISION_FORCED"? "mail-cache-decisions.c file contains the rules how Dovecot changes the decisions." <-- is it in this file? My setup is 2.2.9 on Ubuntu 14.04 running on OpenVZ containers with 2 Director and 2 imap/pop3 backends. The storage is shared via NFS. Is this the performance problem? If dovecot has metadata I want in its cache, I cannot see how this is a problem. Can these settings be useful for my case? mail_always_cache_fields = mail_cache_fields = flags mail_cache_min_mail_count = 0 mail_never_cache_fields = imap.envelope Thanks.

2 2

Support for multiple passwords?
by Conrad Kostecki 18 Mar '15

18 Mar '15

Hi! Currently, the passwords are stored in plaintext for my dovecot, as I am still using cram-md5 AND digest-md5. I have still to offer that, as I have some deprecated clients, therefore, I am unable to hash at least those passwords for that accounts. I've found on the Wiki: > In future it's possible that Dovecot could support multiple passwords > in different schemes for a single user. Is there any news about this? Are there still any plans to support this maybe in future? For my understanding, that would solve my problem, that I could define a password in both schemes (cram and digest) and don't have to use plaintext password? Cheers Conrad

3 6

passwd file for quota
by Cliff Hayes 18 Mar '15

18 Mar '15

I need to implement quota. I read as much as I could including http://wiki2.dovecot.org/HowTo/SimpleVirtualInstall But my current /etc/passwd file does not have the password in it as shown in dovecot docs ... there is an x where the password should be. I created a program that creates a passwd file in the proper format with the proper extra quota fields for all users (except it has an x where the password should be). I plan to store it in /etc/dovecot How do I get dovecot to stop looking at /etc/passwd and start looking at /etc/dovecot/passwd? And hopefully that will not affect how it gets the password (pam) because when users change their password from webmail of course dovecot will need to be looking in the same place. # dovecot -n output # 2.0.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-431.29.2.el6.x86_64 x86_64 Scientific Linux release 6.5 (Carbon) auth_failure_delay = 5 secs auth_username_format = %Ln auth_verbose_passwords = plain first_valid_uid = 9 mail_access_groups = mail mail_location = maildir:~/Maildir managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date mbox_write_locks = fcntl passdb { driver = pam } plugin { sieve = ~/.dovecot.sieve sieve_after = /dovecotSieveAfter/ sieve_dir = ~/sieve } protocols = imap lmtp sieve service managesieve-login { inet_listener sieve { port = 4190 } } ssl_ca = </etc/pki/dovecot/certs/intermediate20150202.crt ssl_cert = </etc/pki/dovecot/certs/avalon20150202.crt ssl_key = </etc/pki/dovecot/private/avalon20150129.key ssl_verify_client_cert = yes userdb { driver = passwd } protocol lmtp { log_path = /var/log/dovecot-lmtp.log mail_plugins = " sieve" } protocol lda { log_path = /var/log/dovecot-lda.log mail_plugins = " sieve" }

2 4

Roundcubemail problem with Dovecot
by Robert Moskowitz 18 Mar '15

18 Mar '15

I am getting "Connection to storage server failed." in roundcubemail. On doing a google search If find: http://help.directadmin.com/item.php?id=473 Which puts the problem at dovecot. I did get a dovecot update back on 3-5 and that would match to my one roundcube mail user complaining and the delays I am seeing with thunderbird and outlook users. So with my setup, I am trying to figure what are the index files to delete. Say for myself, I am seeing: /home/vmail/htt-consult.com/rgm/dovecot.index /home/vmail/htt-consult.com/rgm/dovecot.index.cache /home/vmail/htt-consult.com/rgm/dovecot.index.log /home/vmail/htt-consult.com/rgm/.Drafts/dovecot.index /home/vmail/htt-consult.com/rgm/.Drafts/dovecot.index.cache /home/vmail/htt-consult.com/rgm/.Drafts/dovecot.index.log /home/vmail/htt-consult.com/rgm/.Sent/dovecot.index /home/vmail/htt-consult.com/rgm/.Sent/dovecot.index.cache /home/vmail/htt-consult.com/rgm/.Sent/dovecot.index.log /home/vmail/htt-consult.com/rgm/.Spam/dovecot.index /home/vmail/htt-consult.com/rgm/.Spam/dovecot.index.cache /home/vmail/htt-consult.com/rgm/.Spam/dovecot.index.log /home/vmail/htt-consult.com/rgm/.Trash/dovecot.index /home/vmail/htt-consult.com/rgm/.Trash/dovecot.index.cache /home/vmail/htt-consult.com/rgm/.Trash/dovecot.index.log Do I delete all of these? The index.cache files are quite large.

1 1

Re: Dovecot current number of connections being used.
by Joseph Tam 18 Mar '15

18 Mar '15

Jaime Ventura writes: > Is there an easy way to get how many connections are being handled at a > moment? This works: doveadm who -1 2>/dev/null | wc -l If yopu only want to coutn IMAP connections (not POP3), doveadm who -1 2>/dev/null | grep -Fc imap Joseph Tam <jtam.home(a)gmail.com>

2 1

Proxying of non "plain" SASL mechnisms.
by Peter Mogensen 18 Mar '15

18 Mar '15

Hi, I understand from earlier discussions that the reason dovecot doesn't support proxying of other SASL mechanisms than those which supply the plaintext password is that in general it would be possible to proxy any SASL mechanism since it might protect against man-in-the-middle attacks (which would prevent proxying). However, that has led to choice between letting users use PLAIN (or equivalent), or to have the proxy access the target hosts by "master" password. Of course, having the plaintext password the proxy could in principle do other challenge/response SASL handshakes with the target backend, but right now only LOGIN and PLAIN is implemented. So I wondered about the rationale for not just forward the SASL handshake. - First, blindly forwardning will not do, since the mech data has to be decoded anyway to do any per/user passdb lookup (to, say, find the target host). But you don't need authentication to actually succeed to do that. You only need AuthZ-id or AuthN-id. - Secondly, the design of the interaction between imap-login processes and the auth-service in general prevent in general to forward multi-handshake SASL mechanisms, since the authentication must be done before the proxying can be started. But it doesn't prevent forwarding of single handshake SASL mechanisms which use SASL-IR. - Thirdly, while it's correct that some SASL mechanisms protect against man-in-the-middle attacks, that doesn't apply for most single-handshake SASL-IR mechanisms unless they do some kind of channel-binding. (like SASL EXTERNAL) For example, the GS2-KRB5 SASL mech would be perfectly forwarded if just the Kerberos ticket doesn't put restrictions on the client IP-address. So, why not just extend the support for proxy authentication forwarding to any single-handskake SASL-IR mechanism, which doesn't use channel-binding? (which includes PLAIN, but also GS2-KRB5, and possibly others). /Peter

2 2

Dovecot 2.2.15 issues with global ACL
by Ovidiu Moldovan 18 Mar '15

18 Mar '15

Hello, We have upgraded from Dovecot 2.2.13 to 2.2.15 and we are using global ACL file. The content of the ACL file is as following: * owner r INBOX owner lrwstipekxa INBOX/* owner lrwstipekxa user owner rwstipekxa user/* owner rwstipekxa This worked fine but after update any user cannot see any folders from under the INBOX, also they cannot create any new folders. Error into the logs are like this: Debug: acl: Mailbox not in dovecot-acl-list: INBOX Debug: acl: Mailbox not in dovecot-acl-list: INBOX/Chats Debug: acl: Mailbox not in dovecot-acl-list: INBOX/Draft Debug: acl: Mailbox not in dovecot-acl-list: INBOX/INBOX .... I can only see one acl change log at version 2.2.14: http://www.dovecot.org/list/dovecot-news/2014-October/000276.html acl: Global ACL file now supports "quotes" around patterns. But I could not find the reason why the global acl file does not work anymore? Br, Ova

2 2

http://xi.rename-it.nl 2.2.16-1~auto+10/11/12/13: segfault /var/lib/dovecot/auth OR (db_ldap_connect_delayed):
by Denny Fuchs 17 Mar '15

17 Mar '15

hi, I testing around with Kolab with LDAP and have some strange problems, with the auto generated packages for Wheezy. On my first test VM, I have 2:2.2.16~rc1-1~auto+4 installed, and everything works as expected. On a new VM I have 2.2.16-1~auto+13_amd64.deb packages and if I include LDAP backend, I get a segmentation fault on /usr/lib/dovecot/auth: root@kolab:/etc/dovecot/conf.d# /usr/lib/dovecot/auth Segmentation fault with auto+12 and auto+13 If I downgrade to auto+11 or auto+10 I get: Mar 17 14:42:59 kolab dovecot: auth: Panic: file db-ldap.c: line 1228 (db_ldap_connect_delayed): assertion failed: (conn->to == NULL) Mar 17 14:42:59 kolab dovecot: auth: Error: Raw backtrace: /usr/lib/dovecot/libdovecot.so.0(+0x7b5ef) [0x7f57d815c5ef] -> /usr/lib/dovecot/libdovecot.so.0(+0x7b64e) [0x7f57d815c64e] -> /usr/lib/dovecot/libdovecot.so.0(i_fatal+0) [0x7f57d810b0d5] -> /usr/lib/dovecot/modules/auth/libauthdb_ldap.so(+0x5455) [0x7f57d70e2455] -> dovecot/auth(userdb_init+0x1a) [0x42765a] -> dovecot/auth(auths_init+0xc9) [0x40d979] -> dovecot/auth(main+0x2b5) [0x40cc85] -> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xfd) [0x7f57d7523ead] -> dovecot/auth() [0x40cee9] Mar 17 14:42:59 kolab dovecot: auth: Fatal: master: service(auth): child 1161 killed with signal 6 (core dumps disabled) Mar 17 14:42:59 kolab dovecot: master: Error: service(auth): command startup failed, throttling for 2 secs Mar 17 14:42:59 kolab dovecot: pop3-login: Disconnected: Auth process broken (disconnected before auth was ready, waited 0 secs): user=<>, rip=::1, lip=::1, secured, session=<1QMUJXwRTQAAAAAAAAAAAAAAAAAAAAAB> ii dovecot-sieve 2:2.2.16~rc1-1~auto+4 amd64 secure POP3/IMAP server - Sieve filters support root@kolab:/# ldd /usr/lib/dovecot/modules/auth/libauthdb_ldap.so linux-vdso.so.1 => (0x00007ffc4a1c6000) libldap_r-2.4.so.2 => /usr/lib/x86_64-linux-gnu/libldap_r-2.4.so.2 (0x00007effe2d1a000) librt.so.1 => /lib/x86_64-linux-gnu/librt.so.1 (0x00007effe2b12000) libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x00007effe2786000) liblber-2.4.so.2 => /usr/lib/x86_64-linux-gnu/liblber-2.4.so.2 (0x00007effe2577000) libresolv.so.2 => /lib/x86_64-linux-gnu/libresolv.so.2 (0x00007effe2361000) libsasl2.so.2 => /usr/lib/x86_64-linux-gnu/libsasl2.so.2 (0x00007effe2145000) libgnutls.so.26 => /usr/lib/x86_64-linux-gnu/libgnutls.so.26 (0x00007effe1e85000) libgcrypt.so.11 => /lib/x86_64-linux-gnu/libgcrypt.so.11 (0x00007effe1c06000) libpthread.so.0 => /lib/x86_64-linux-gnu/libpthread.so.0 (0x00007effe19e9000) /lib64/ld-linux-x86-64.so.2 (0x00007effe3180000) libdl.so.2 => /lib/x86_64-linux-gnu/libdl.so.2 (0x00007effe17e5000) libtasn1.so.3 => /usr/lib/x86_64-linux-gnu/libtasn1.so.3 (0x00007effe15d3000) libz.so.1 => /lib/x86_64-linux-gnu/libz.so.1 (0x00007effe13bc000) libp11-kit.so.0 => /usr/lib/x86_64-linux-gnu/libp11-kit.so.0 (0x00007effe11aa000) libgpg-error.so.0 => /lib/x86_64-linux-gnu/libgpg-error.so.0 (0x00007effe0fa6000) Then I copied from my first VM the libauthdb_ldap.so file on the new test VM to /usr/lib/dovecot/modules/auth/libauthdb_ldap.so (remember: ~rc1-1~auto+4) and the result: root@kolab:/etc/dovecot/conf.d# /usr/lib/dovecot/auth Error: LDAP: binding failed (dn cn=Directory Manager): Invalid credentials and, it works again ... linux-vdso.so.1 => (0x00007fffa00c6000) libldap_r-2.4.so.2 => /usr/lib/x86_64-linux-gnu/libldap_r-2.4.so.2 (0x00007f94b7ec3000) librt.so.1 => /lib/x86_64-linux-gnu/librt.so.1 (0x00007f94b7cbb000) libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x00007f94b792f000) liblber-2.4.so.2 => /usr/lib/x86_64-linux-gnu/liblber-2.4.so.2 (0x00007f94b7720000) libresolv.so.2 => /lib/x86_64-linux-gnu/libresolv.so.2 (0x00007f94b750a000) libsasl2.so.2 => /usr/lib/x86_64-linux-gnu/libsasl2.so.2 (0x00007f94b72ee000) libgnutls.so.26 => /usr/lib/x86_64-linux-gnu/libgnutls.so.26 (0x00007f94b702e000) libgcrypt.so.11 => /lib/x86_64-linux-gnu/libgcrypt.so.11 (0x00007f94b6daf000) libpthread.so.0 => /lib/x86_64-linux-gnu/libpthread.so.0 (0x00007f94b6b92000) /lib64/ld-linux-x86-64.so.2 (0x00007f94b8328000) libdl.so.2 => /lib/x86_64-linux-gnu/libdl.so.2 (0x00007f94b698e000) libtasn1.so.3 => /usr/lib/x86_64-linux-gnu/libtasn1.so.3 (0x00007f94b677c000) libz.so.1 => /lib/x86_64-linux-gnu/libz.so.1 (0x00007f94b6565000) libp11-kit.so.0 => /usr/lib/x86_64-linux-gnu/libp11-kit.so.0 (0x00007f94b6353000) libgpg-error.so.0 => /lib/x86_64-linux-gnu/libgpg-error.so.0 (0x00007f94b614f000) So, it seems, that there is something broken with the autogenerated packages, or with my fresh installed Wheey VM (KVM AMD64) in combination with LDAP. any suggestions? cu denny

2 1

Dovecot current number of connections being used.
by Jaime Ventura 17 Mar '15

17 Mar '15

Hey, Is there an easy way to get how many connections are being handled at a moment? I wanted to have that number over the time and see: - Trends on usage during the day - how close is it from reaching the maximum number of connections. - ... I'm searching for a solution without recurring to something like netstat | grep imap | wc -l. Thanks, Jaime

2 1