- dovecot - dovecot.org

[Dovecot] dovecot 2.x via xinetd
by Mathieu Roy 23 Jul '12

23 Jul '12

Hello, I was using dovecot 1.2.x via xinetd with a setup like http://wiki.dovecot.org/InetdInstall Since I upgraded to Debian Wheezy, shipping dovecot 2.x, it no longer works. At best, I end up with stuff like Error: net_connect_unix(anvil) failed: No such file or directory Fatal: Couldn't connect to anvil Any clues? Regards, (add me in Cc in replies, I'm not suscribed to the list) # doveconf -n # 2.1.7: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-3-amd64 x86_64 Debian wheezy/sid ext4 mail_location = maildir:/home/%n/.Maildir:LAYOUT=fs mail_privileged_group = mail namespace inbox { inbox = yes location = prefix = } passdb { driver = pam } protocols = " imap" ssl_cert = </etc/dovecot/certs/cert-gate.crt ssl_key = </etc/dovecot/certs/cert-gate.key userdb { driver = passwd } -- Mathieu Roy

4 7

[Dovecot] about .dovecot.sieve file can't found for directory
by F.Y 23 Jul '12

23 Jul '12

Hi all : i used roundcube webmail and enable filter(managesieve) . i create some rules ,and the rule save in maildir . ok ..see my dovecot config: # 1.2.15: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-686 i686 Debian 6.0.5 ext3 log_path: /var/log/dovecot.log log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap imaps pop3 pop3s managesieve listen(default): * listen(imap): * listen(pop3): * listen(managesieve): *:2000 disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login login_executable(managesieve): /usr/lib/dovecot/managesieve-login mail_privileged_group: mail mail_uid: vuser mail_gid: vgroup mail_location: maildir:/home/data/domains/%d/%n/Maildir mail_debug: yes mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_executable(managesieve): /usr/lib/dovecot/managesieve mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 mail_plugin_dir(managesieve): /usr/lib/dovecot/modules/managesieve managesieve_logout_format(default): bytes=%i/%o managesieve_logout_format(imap): bytes=%i/%o managesieve_logout_format(pop3): bytes=%i/%o managesieve_logout_format(managesieve): bytes(in=%i/out=%o) lda: postmaster_address: fy(a)5dshu.com mail_plugins: sieve mail_plugin_dir: /usr/lib/dovecot/modules/lda auth_socket_path: /var/run/dovecot/auth-master auth default: mechanisms: plain login verbose: yes debug: yes passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 384 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vuser group: vgroup plugin: sieve_dir: /home/data/domains/%d/%n/Maildir/sieve sieve: /home/data/domains/%d/%n/Maildir/.dovecot.sieve I create some rules, it can save for Maildir/sieve ,but can't found .dovecot.sieve on Maildir.. i trying for google and baidu search engine,can't found any help .

2 1

[Dovecot] ot: execute a script via email?
by Voytek Eymont 22 Jul '12

22 Jul '12

anyone has any tips what's best way to execute a script via email ? I have a wget script that fetches some pages, and, emails me the output, there is no paramters passed, it's all in the script I'll like to email in and action the script to get the results email -- Voytek

5 16

[Dovecot] Upgrade Problem from 2.0.18 to 2.1.7
by Michael Domann 22 Jul '12

22 Jul '12

hi there, i'm running a debian wheezy in a chroot at a fritzbox 7230, running with freetz. Running well until the upgrade of version 2.1.7 from debian repros comming up. after upgrade, the server comes up, but login is not possible. Jul 20 20:13:46 master: Warning: Killed with signal 15 (by pid=15309 uid=0 code=kill) Jul 20 20:13:46 master: Info: Dovecot v2.1.7 starting up (core dumps disabled) Jul 20 20:14:15 lda: Debug: Loading modules from directory: /usr/lib/dovecot/modules Jul 20 20:14:15 lda: Debug: Loading modules from directory: /usr/lib/dovecot/modules Jul 20 20:14:15 lda: Debug: Module loaded: /usr/lib/dovecot/modules/lib90_sieve_plugin.so Jul 20 20:14:15 lda(mdomann): Debug: Effective uid=1000, gid=1000, home=/home/mdomann Jul 20 20:14:15 lda: Debug: Module loaded: /usr/lib/dovecot/modules/lib90_sieve_plugin.so Jul 20 20:14:15 lda(mdomann): Debug: Namespace : type=private, prefix=, sep=, inbox=yes, hidden=no, list=yes, subscriptions=yes location=maildir:/home/mdomann/Mail:LAYOUT=fs Jul 20 20:14:15 lda(mdomann): Debug: fs: root=/home/mdomann/Mail, index=, control=, inbox=/home/mdom ann/Mail, alt= Jul 20 20:14:15 lda(mdomann): Debug: Effective uid=1000, gid=1000, home=/home/mdomann Jul 20 20:14:15 lda(mdomann): Debug: Namespace : type=private, prefix=, sep=, inbox=yes, hidden=no, list=yes, subscriptions=yes location=maildir:/home/mdomann/Mail:LAYOUT=fs Jul 20 20:14:15 lda(mdomann): Debug: fs: root=/home/mdomann/Mail, index=, control=, inbox=/home/mdom ann/Mail, alt= Jul 20 20:14:15 lda(mdomann): Debug: userdb lookup skipped, username taken from USER environment Jul 20 20:14:15 lda(mdomann): Debug: none: root=, index=, control=, inbox=, alt= Jul 20 20:14:15 lda(mdomann): Debug: userdb lookup skipped, username taken from USER environment Jul 20 20:14:15 lda(mdomann): Debug: none: root=, index=, control=, inbox=, alt= Jul 20 20:14:16 lda(mdomann): Debug: Destination address: mdomann(a)fritz.fonwlan.box (source: user@ho stname) Jul 20 20:14:16 lda(mdomann): Debug: Destination address: mdomann(a)fritz.fonwlan.box (source: user@ho stname) Jul 20 20:14:16 lda(mdomann): Debug: sieve: include: sieve_global_dir is not set; it is currently no t possible to include `:global' scripts. Jul 20 20:14:16 lda(mdomann): Debug: sieve: include: sieve_global_dir is not set; it is currently no t possible to include `:global' scripts. Jul 20 20:14:16 lda(mdomann): Debug: sieve: using sieve path for user's script: /home/mdomann/.dovec ot.sieve Jul 20 20:14:16 lda(mdomann): Debug: sieve: using sieve path for user's script: /home/mdomann/.dovec ot.sieve Jul 20 20:14:16 lda(mdomann): Debug: sieve: opening script /home/mdomann/.dovecot.sieve Jul 20 20:14:16 lda(mdomann): Debug: sieve: opening script /home/mdomann/.dovecot.sieve Jul 20 20:14:16 lda(mdomann): Debug: sieve: script binary /home/mdomann/.dovecot.svbin successfully loaded Jul 20 20:17:15 imap: Error: dovecot/imap: error while loading shared libraries: libpthread.so.0: failed to map segment from shared object: Cannot allocate memory Jul 20 20:17:15 imap: Fatal: master: service(imap): child 22594 returned error 127 Jul 20 20:17:15 master: Error: service(imap): command startup failed, throttling for 2 secs Jul 20 20:17:15 imap-login: Error: read(imap) failed: Connection reset by peer Jul 20 20:17:15 imap-login: Info: Internal login failure (pid=22586 id=1) (internal failure, 1 succesful auths): user=<mdomann>, method=PLAIN, rip=192.168.2.105, lip=192.168.2.1, TLS, session=<gHEKlUjFNQDAqAJp> the libary is still there fritz:~# ldd /usr/sbin/dovecot libdovecot.so.0 => /usr/lib/dovecot/libdovecot.so.0 (0x2aaaa000) libc.so.6 => /lib/mips-linux-gnu/libc.so.6 (0x2ab48000) libdl.so.2 => /lib/mips-linux-gnu/libdl.so.2 (0x2accc000) librt.so.1 => /lib/mips-linux-gnu/librt.so.1 (0x2ace0000) /lib/ld.so.1 (0x55550000) libpthread.so.0 => /lib/mips-linux-gnu/libpthread.so.0 (0x2acfa000) the ulimit i have tried, but without success. root@fritz:/var/mod/root# ulimit -a -f: file size (blocks) unlimited -t: cpu time (seconds) unlimited -d: data seg size (kb) unlimited -s: stack size (kb) unlimited -c: core file size (blocks) unlimited -m: resident set size (kb) unlimited -l: locked memory (kb) unlimited -p: processes unlimited -n: file descriptors 16384 -v: address space (kb) unlimited -w: locks unlimited fritz:~# dovecot -n # 2.0.18: /etc/dovecot/dovecot.conf # OS: Linux 2.6.28.10 mips Debian wheezy/sid squashfs base_dir = /var/run/dovecot/ default_client_limit = 100 default_process_limit = 50 default_vsz_limit = 6 M disable_plaintext_auth = no lda_mailbox_autocreate = yes listen = * log_path = /var/log/dovecot login_greeting = Dovecot on sysiphus ready. mail_debug = yes mail_gid = 1000 mail_location = maildir:/home/mdomann/Mail:LAYOUT=fs mail_uid = 1000 namespace { hidden = no inbox = yes list = yes location = prefix = subscriptions = yes type = private } passdb { args = scheme=CRYPT username_format=%u /etc/dovecot/users driver = passwd-file } plugin { mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename mail_log_fields = uid box msgid size sieve = ~/.dovecot.sieve sieve_dir = ~/sieve sieve_global_path = /etc/dovecot/dovecot.sieve } postmaster_address = mdomann@localhost protocols = " imap" service anvil { client_limit = 210 } service auth-worker { user = $default_internal_user } service auth { unix_listener /var/spool/postfix/private/auth { mode = 0666 } unix_listener auth-userdb { group = mdomann mode = 0777 user = mdomann } } service imap-login { inet_listener imap { port = 143 } inet_listener imaps { port = 993 ssl = yes } service_count = 1 } service lmtp { unix_listener lmtp { mode = 0666 } } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem syslog_facility = debug userdb { args = username_format=%u /etc/dovecot/users driver = passwd-file } verbose_proctitle = yes protocol lda { mail_plugins = " sieve" syslog_facility = mail } protocol imap { imap_client_workarounds = tb-extra-mailbox-sep imap_idle_notify_interval = 24 mins mail_max_userip_connections = 20 } root@fritz:/var/mod/root# free -m total used free shared buffers Mem: 59512 52260 7252 0 2452 -/+ buffers: 49808 9704 Swap: 538608 8116 530492 I have no idea to solve this. The question is, is it possible a bug in debian wheezy mips or in dovecot. Hopefully someone can point me in the right direction. thanks and regards micha

4 5

[Dovecot] Performance based choices
by Hans J. Albertsson 22 Jul '12

22 Jul '12

I've stopped trying to find a HowTo that suits me right away, and instead I am happily trudging thru the Dovecot wiki, article by article. I have right up front thought of one question, a general one, and some detailed versions of that same question: Generally, is there much general performance and reliability background data available for making the basic choices? Say: 1st. delivery: maildrop or LDA or LMTP? I tend to think LMTP should be the ideal choice for me, from what I've gleaned so far. Above all it means that there's only one conceptual thing that needs to know, and postfix and other stuff can safely let dovecot deal with accessing and finding mailboxes. And it won't start and stop thousands of processes. 2nd. mailbox format: Maildir and mbox are the older forms. Are there any advantages to using dovecot's dbox instead? mdbox strikes me as having the potential for being a fast and reliable format. Is that an accurate impression? And, is mdbox mature enough for me to forget maildir and mbox? 3rd. I'm aiming for a poor man's High Availability system: I'm using zfs, and I'm hoping to place all config data for dovecot and postfix and everything else in one zfs file system, and all the user owned data (what should normally go in a home directory) in another (or two or three other) zfs file systems. Then I'm planning to copy over all data at regular intervals, to a second, normally passive, mail server. If the main server breaks, we'll manually (or using scripts and autodetection) fail over to the passive one, making it active, and turning power off to the failed guy using IPMI. The data transfer is to be zfs send/zfs recv over a separate highly redundant network connection. Is this a reasonable idea, or is there some advantage to letting dsync do some of the copying??? Or is there some totally different alternative? iscsi? 4th. With about a thousand users/accounts: does MySQL pay off? Or is LDAP the way to go? Or will a dovecot-specific passwd-file do the job well enough? Those are the three I'm used to since before. I'd like to stay with the flat file, but not the system password file: we're not going to let users in except into dovecot.

2 1

[Dovecot] Corrupted dbox file - purging found mismatched offsets
by Daniel Parthey 22 Jul '12

22 Jul '12

Hi, we are running a cluster using mdbox on NFS with director+mailbox on each node. After running our daily doveadm purge loop over all users, we got dbox corruption... doveadm user "*" |\ while read username do doveadm -c /etc/dovecot-director/dovecot-director.conf -D purge -u "$username" done For one user (which deleted a lot of messages from his mailboxes today), we got the following error in the dovecot.log: Jul 22 20:10:36 10.129.3.213 dovecot: doveadm(user(a)example.org): Error: Corrupted dbox file /mail/dovecot/example.org/user/mail/storage/m.24 (around offset=1380859): purging found mismatched offsets (1380829 vs 920527, 3/61) Jul 22 20:10:36 10.129.3.213 dovecot: doveadm(user(a)example.org): Warning: mdbox /mail/dovecot/example.org/user/mail/storage: rebuilding indexes What does this message exactly tell me and how to prevent this in the future? Now the indexes are broken and flags are lost. The "storage" directory content of the affected user looks as follows: drwx------ 2 vmail vmail 4096 2012-07-22 20:10 . drwx------ 4 vmail vmail 4096 2012-05-06 12:16 .. -rw------- 1 vmail vmail 99008 2012-07-22 20:10 dovecot.map.index -rw------- 1 vmail vmail 33016 2012-07-22 20:10 dovecot.map.index.log -rw------- 1 vmail vmail 34664 2012-07-22 20:10 dovecot.map.index.log.2 -rw------- 1 vmail vmail 8134 2012-05-16 11:36 m.22 -rw------- 1 vmail vmail 10572466 2012-06-02 23:09 m.24 -rw------- 1 vmail vmail 1380205 2012-05-27 10:59 m.24.broken -rw------- 1 vmail vmail 6506837 2012-06-09 15:42 m.25 -rw------- 1 vmail vmail 18201641 2012-06-17 22:50 m.26 -rw------- 1 vmail vmail 11345293 2012-07-01 14:37 m.28 -rw------- 1 vmail vmail 36707787 2012-07-08 23:05 m.29 -rw------- 1 vmail vmail 6062419 2012-07-15 23:34 m.30 -rw------- 1 vmail vmail 52396198 2012-07-22 20:10 m.31 -rw------- 1 vmail vmail 3067862 2012-07-20 14:31 m.32 -rw------- 1 vmail vmail 44520965 2012-07-20 14:31 m.33 -rw------- 1 vmail vmail 52426605 2012-07-22 20:10 m.34 -rw------- 1 vmail vmail 28984844 2012-07-22 20:10 m.35 -rw------- 1 vmail vmail 14465248 2012-07-22 20:10 m.36 -rw------- 1 vmail vmail 37451127 2012-07-22 20:10 m.37 -rw------- 1 vmail vmail 41494033 2012-07-22 20:10 m.38 -rw------- 1 vmail vmail 52066924 2012-07-22 20:10 m.39 -rw------- 1 vmail vmail 49785529 2012-07-22 20:10 m.40 -rw------- 1 vmail vmail 23509886 2012-07-22 20:10 m.41 -rw------- 1 vmail vmail 29339462 2012-07-22 20:10 m.42 -rw------- 1 vmail vmail 29510420 2012-07-22 20:10 m.43 -rw------- 1 vmail vmail 50896380 2012-07-22 20:10 m.44 -rw------- 1 vmail vmail 8331046 2012-07-22 20:10 m.45 -rw------- 1 vmail vmail 5903744 2012-07-22 20:10 m.46 -rw------- 1 vmail vmail 70281 2012-07-22 20:10 m.47 -rw------- 1 vmail vmail 27397909 2012-07-22 20:10 m.48 -rw------- 1 vmail vmail 3893509 2012-07-22 20:10 m.49 -rw------- 1 vmail vmail 1410097 2012-07-22 20:10 m.50 -rw------- 1 vmail vmail 1905759 2012-07-22 20:10 m.51 -rw------- 1 vmail vmail 51783968 2012-05-06 12:12 m.9 Any hints on how to prevent dbox corruption in this case? And what should I do with the "m.24.broken" file now? Regards Daniel -- https://plus.google.com/103021802792276734820

1 0

[Dovecot] Confusion when trying to set up a first postfix+dovecot mailserver
by Hans J. Albertsson 22 Jul '12

22 Jul '12

I'm trying to set up a first test for a dovecot + postfix (+ many other things) mail server for about 1000 accounts, and I keep stumbling on confusing inconsistencies in the HowTo documents I'm trying to follow. I tried to do a simple setup with virtual users using a howto saying it was for just that and that it's for Dovecot 2.x, and it shows a few text chunks to put in files, and then says it's better to do the changes in the example-config conf file.... And then the whole structure of config files and dirs is totally different from what is implied in the howto. And of course it won't run. Probably because of the structure of a conf.d dir is multiple files, and the instructions are explicitly written for the case of having a single conf file. Can anyone suggest an order in which to read docs that will take me thru w/o being totally confusing? I would very much like to be able to enable bit by bit, rather than have to understand all of dovecot before I can even begin to test it. P.S: I want to setup a server using postfix+dovecot+tls+virtualusers+maildir+dspam+mailman, at least that's the target I'm aiming for. Please suggest a good HowTo for this setup that will not be too confusing. Also, Sorry if I sound like a whining kid: I am new to dovecot and postfix, but I was a software support engineer for Sun for ages, and I should really be able to manage this if I just had some consistent and non-confusing HowTo or Tutorial to follow as a first try.

3 8

[Dovecot] Director for smtp-auth
by Patrick Westenberg 22 Jul '12

22 Jul '12

Hi all, isn't it possible to use the director functionality for smtp-auth too? I have a frontend system for imap and outgoing mails using sasl and I recognized that all sasl username/password combinations are accepted as these credentials aren't checked by the backend servers. Regards Patrick

2 2

[Dovecot] postfix/sendmail configuration
by Gary Partis 20 Jul '12

20 Jul '12

Hi all I have searched the net and cant find anything relating to this. In 15-lda.conf, the default sendmail is used to send messges from Dovecot, such as "out of hours" and "redirected" emails controlled by sieves. However, postfix/sendmail is looking in /etc/postfix/main.cf for the configuration file (as logged in /var/log/maillog), but I have the config file elsewhere, and I even have MAIL_CONFIG setup to point to the true config directory. Is there a method of setting 15-lda.conf sendmail config to ensure it uese the correct postfix config file? Thanks in advance Gary

2 1

Re: [Dovecot] Converting from Maildir format ?
by Nick＠5sg.eu 20 Jul '12

20 Jul '12

Hi Stan, >> I'm still trying to find out if anyone knows the correct >> way to either switch the existing Maildir multiple file >> format to the single file format I believe known as MBox. > Did you restart dovecot after the mailbox_location change? Yup... > Show 'dovecot -n' output It shows it - and 'plugin: convert_mail: mbox:%h/%u/mail' I also changed it in dovecot/conf.d/01-dovecot-postfix.conf Hi Charles, > format known as dbox Running v1.2.9 on Ubuntu v10.4 > The wiki/docs are pretty thorough for basic settings. That's where I got the mbox line above.. Thanks gentlemen, Nick. . . . . -- _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ . . . . . . . . ...---... (Stamp Out Spam and Save Our Servers) http://sosNow.ws -=[ do you know morse code ? ]=- . . . . . . . . _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/

3 2

[Dovecot] Append with literal+ and mailbox over quota
by Ewald Dieterich 19 Jul '12

19 Jul '12

I'm appending a mail with literal+ to a mailbox that is over quota: 1 APPEND INBOX {127+} From: <ewald.dieterich(a)fun.de> To: <ewald.dieterich(a)fun.de> Subject: Quota-Test Message-ID: <abcdefg(a)fun.de> Quota-Test 1 NO [OVERQUOTA] Quota exceeded (mailbox for user is full) 2 NOOP 1 BAD Error in IMAP command APPEND: Invalid arguments. 3 NOOP 3 OK NOOP completed. Somehow the first NOOP is considered to be part of the already failed APPEND. I have to add an empty line after to NO response for the NOOP to work: 1 APPEND INBOX {127+} From: <ewald.dieterich(a)fun.de> To: <ewald.dieterich(a)fun.de> Subject: Quota-Test Message-ID: <abcdefg(a)fun.de> Quota-Test 1 NO [OVERQUOTA] Quota exceeded (mailbox for user is full) 2 NOOP 2 OK NOOP completed. Can somebody confirm this to be bug? Here is the output of doveconf -n # 2.1.8: /usr/local/dovecot-orig/etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-amd64 x86_64 Debian 6.0.3 ext3 auth_debug = yes auth_verbose = yes debug_log_path = /var/log/dovecot/debug.log disable_plaintext_auth = no info_log_path = /var/log/dovecot/info.log log_path = /var/log/dovecot/error.log mail_debug = yes mail_location = mdbox:/var/spool/dovecot/%2.256Hu/%3.4096Hu/%u mail_plugins = notify mail_log quota acl namespace { inbox = yes location = prefix = INBOX. separator = . type = private } passdb { driver = pam } plugin { acl = vfile autocreate = INBOX.Drafts autocreate2 = INBOX.Sent autocreate3 = INBOX.Trash quota = dict:User quota::file:/var/spool/dovecot/%2.256Hu/%3.4096/%u/dovecot.dict quota_rule = *:bytes=2000 } ssl = no userdb { driver = passwd } protocol imap { mail_plugins = notify mail_log quota acl autocreate imap_quota imap_acl

1 1

[Dovecot] Disable W=<vsize> in filenames
by Daniel Pieper 19 Jul '12

19 Jul '12

Hi, I'm using Dovecot 2.1.8. Is it possible to deactivate the "W=" Maildir filename extension, so that dovecot not add it to maildir filenames?

2 1

[Dovecot] Converting from Maildir format ?
by Nick＠5sg.eu 19 Jul '12

19 Jul '12

Hi again, I'm still trying to find out if anyone knows the correct way to either switch the existing Maildir multiple file format to the single file format I believe known as MBox. Failing that, though it'll mean a LOT of work for me to manually convert all of the existing Maildirs, how do I get dovecot to work in future in MBox single file format. I tried entering 'mail_location = mbox:~/mail:INBOX=/%h/%u' in the 'dovecot.conf', but it still saves each message in a file of its own in the /new /cur /tmp directories ?? Thanks, Nick. . . . . -- _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ . . . . . . . . ...---... (Stamp Out Spam and Save Our Servers) http://sosNow.ws -=[ do you know morse code ? ]=- . . . . . . . . _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/

3 2

[Dovecot] Make a whole mailbox read-only
by Sandro Tosi 19 Jul '12

19 Jul '12

Hello, i've found an old thread [1] where it was stated that a whole mailbox can be made read-only only setting the according permissions on the filesystem side. [1] http://www.mailinglistarchive.com/html/dovecot@dovecot.org/2011-12/msg00300… i'd like to check if it's still the only option we have with dovecot v2.0.18 . Regards, -- Sandro Tosi Product Engineer Shared Hosting Products R&D | Dada.pro eml sandro.tosi(a)register.it

3 5

Re: [Dovecot] Issues with Plus addressing and detail part of subaddress.
by Sean Kamath 19 Jul '12

19 Jul '12

On Jul 17, 2012, at 3:18 AM, Charles Marcus wrote: >> I really thought it would be a simple "here's what you missed", since >> the logs are relatively uninformative... > > The point is, what may appear to be uninformative to you may tell Timo (or someone else who knows what to look for) all they need to know to pinpoint the problem. Whilst I would normally agree, at the same time I've had a fair amount of experience with dovecot and sendmail (been running them for over 10 years). Pigeonhole is new to me, however. . . > One thing I did notice is that you are sending this mail from an internal IP... since most people use very different checks for such mail (bypassing many/most checks), maybe you should be testing from an external address (one that comes in from outside your network)? So I have a DMZ that houses the mail server for my domain, which is where the private addresses are. Connections are passed through the OpenBSD router to the mail server. So testing from an external address would be essentially the same (since the connection to the SMTP server talks to the sendmail process as the /usr/lib/sendmail process). Regardless, my original tests were sending mail from the Mac off-network. > Also, it is always recommended when setting up a new server to start with the latest version... for 2.0.x that would be 2.0.19, but the latest is 2.1.8... When I set it up, 2.0.13 _was_ the latest. :-) I was hoping to avoid the pain of recompiling dovecot and pigeonhole. Not that big a deal, I guess. . . >> lda_original_recipient_header = X-Original-To >> lmtp_save_to_detail_mailbox = yes > > Ok, I think this is the problem... > > Dovecot's LMTP currently does NOT preserve the x-original-to header... in fact, brought this up recently (I was one of the ones interested in Timo adding support for it) on this (and the postfix, which is what I use) on this very list: > > http://www.dovecot.org/list/dovecot/2012-April/065075.html > > Apparently, after Timo discussed this on the postfix list, he determined that it would not be a very significant change for him to make to add support for this header in LMTP and that he would get to it sooner than later, but as of now, it has not been added. Actually, I'm not using lmtp. I whacked the lmtp_save_to_detail_mailbox in an effort to see if that was the issue before I realized I don't have it turned on. dovecot.conf has: protocols = imap though in 20-managesieve.conf I have: protocols = $protocols sieve I just turned it off and restarted dovecot (though lmtp was not running) and re-ran the test with the same result. So, I think what's going on is pretty straightforward. The local mailer definition in the sendmail.cf file is: Mlocal, P=/usr/local/libexec/dovecot/dovecot-lda, F=lsDFMAw5:/|@qSPhn9, S=EnvFromL/HdrFromL, R=EnvToL/HdrToL, T=DNS/RFC822/X-Unix, A=/usr/local/libexec/dovecot/dovecot-lda -d $u This is more or less right out of the wiki. Since dovecot-lda is passed the -d option, it's using that (and only that) for delivery. Since there's no X-Original-To: header, it doesn't really have any option (since the non-envelope-to address might not exist, or point to something other than the end user's mailbox, etc). It would appear that I have two options: 1) Figure out what macro(s) is(are) valid to pass to dovecot-lda with the -a option in the sendmail config file (sendmail.cf). 2) Get sendmail to put "X-Original-To: <address>" in the header. Both would appear to be a sendmail issue, not a dovecot/pigeonhole issue. Everything I find on the web seems to center around how to use plus addressing to accept mail from multiple email address and filter it into a single address for delivery, only to have the local delivery agent break it back out again. That's not my issue. :-( Sean Sean

1 1

[Dovecot] doesn't work at all
by David Drexler 19 Jul '12

19 Jul '12

Hi, I can't seem to get dovecot to work. When I connect with thunderbird, tbird complains that it can't find the settings for my email. When I connect with evolution, it seems to go through all the motions but it doesn't pick up the waiting messages. Those messages are marked Status: O s if it had read them. The log file for tbird looks like this: Jul 18 17:03:21 why dovecot: imap-login: Aborted login (no auth attempts): rip=68.12.110.134, lip=184.176.6.227 Jul 18 17:03:22 why dovecot: imap-login: Aborted login (no auth attempts): rip=68.12.110.134, lip=184.176.6.227 Jul 18 17:03:22 why dovecot: imap-login: Aborted login (no auth attempts): rip=68.12.110.134, lip=184.176.6.227 Jul 18 17:03:22 why dovecot: pop3-login: Aborted login (no auth attempts): rip=68.12.110.134, lip=184.176.6.227 Jul 18 17:03:22 why dovecot: pop3-login: Aborted login (no auth attempts): rip=68.12.110.134, lip=184.176.6.227 Jul 18 17:03:22 why dovecot: pop3-login: Aborted login (no auth attempts): rip=68.12.110.134, lip=184.176.6.227 Jul 18 17:03:22 why dovecot: imap-login: Aborted login (no auth attempts): rip=68.12.110.134, lip=184.176.6.227 Jul 18 17:03:22 why dovecot: pop3-login: Aborted login (no auth attempts): rip=68.12.110.134, lip=184.176.6.227 Jul 18 17:03:22 why dovecot: imap-login: Aborted login (no auth attempts): rip=68.12.110.134, lip=184.176.6.227 Jul 18 17:03:22 why dovecot: pop3-login: Aborted login (no auth attempts): rip=68.12.110.134, lip=184.176.6.227 Jul 18 17:03:22 why dovecot: pop3-login: Aborted login (no auth attempts): rip=68.12.110.134, lip=184.176.6.227 The log file with evolution is: Jul 17 19:36:43 why dovecot: imap-login: Login: user=<ddrex>, method=PLAIN, rip=68. 12.110.134, lip=184.176.6.227, mpid=22717, TLS Jul 17 19:36:43 why dovecot: imap(ddrex): Debug: Effective uid=500, gid=500, home=/ home/ddrex Jul 17 19:36:43 why dovecot: imap(ddrex): Debug: fs: root=/home/ddrex/mail, index=, control=, inbox=/var/mail/ddrex Jul 17 19:46:17 why dovecot: imap(ddrex): Error: Next message unexpectedly corrupte d in mbox file /var/mail/ddrex at 1504 My conf file: # 2.0.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-220.23.1.el6.x86_64 x86_64 CentOS release 6.2 (Final) base_dir = /var/run/dovecot/ imap_client_workarounds = "delay-newmail " listen = * mail_debug = yes mail_location = mbox:~/mail:INBOX=/var/mail/%u mail_privileged_group = mail mbox_very_dirty_syncs = yes mbox_write_locks = fcntl passdb { driver = pam } pop3_client_workarounds = outlook-no-nuls oe-ns-eoh protocols = imap pop3 service imap-login { vsz_limit = 64 M } service pop3-login { vsz_limit = 64 M } ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { driver = passwd } -------------------------------------------------------------------- Thanks for any clues. dd

2 2

[Dovecot] SQLite dovecot query caching
by Dominic Malolepszy 19 Jul '12

19 Jul '12

Hi, I am wondering if Dovecot caches SQLite queries, and how well it works in high performance setups. I am particularly interested because in the below thread SQLite has been suggested as a means of Dovecot proxying connections to different ports. http://old.nabble.com/director%3A-non-standart-ports-at-backends-td33991991… Cheers, Dominic.

2 7

[Dovecot] MySQL dict issues
by list＠airstreamcomm.net 18 Jul '12

18 Jul '12

Testing using the mysql dict for quota storage (dovecot-2.0.12-2_127.el5), and ran into a couple issues. First is a permissions issue: dovecot: lmtp(26786, dude(a)test.tld) Error: net_connect_unix(/var/run/dovecot/dict) failed: Permission denied (euid=5000(<unknown>) egid=5000(<unknown>) missing +r perm: /var/run/dovecot/dict, euid is not dir owner) The file /var/run/dovecot/dict is listed with srw------- perms. I changes the perms to srw----rwx and it works, but I would like to figure out how to configure properly to run with the uid and gid 5000 as this is the user for virtual mail. The second issue is that two identical rows are created in the mysql database for each user quota. The next message delivered updates both rows. Here is my quota config: 90-quota.conf: plugin { quota_rule = *:storage=10G quota_rule2 = Trash:storage=+10% } plugin { quota = dict:user::proxy::userquota } dict { userquota = mysql:/etc/dovecot/dovecot-dict-sql.conf.ext } dovecot-dict-sql.conf.ext: connect = host=a.b.c.d dbname=mail user=user password=derp map { pattern = priv/quota/storage table = domain_user_quotas username_field = username value_field = bytes } map { pattern = priv/quota/messages table = domain_user_quotas username_field = username value_field = message_count } The last issue might be a documentation omission. Dovecot warned me that the mysql user did not have DELETE privileges on the quota table: dovecot: dict: Error: sql dict: commit failed: DELETE command denied to user 'user'@'a.b.c.d' for table 'domain_user_quotas' The quota dict documentation (at http://wiki2.dovecot.org/Quota/Dict) does not mention DELETE being needed: MySQL uses the following queries to update the quota. You need suitable privileges. INSERT INTO table (bytes,username) VALUES ('112497180','foo(a)spam.dom') ON DUPLICATE KEY UPDATE bytes='112497180'; INSERT INTO table (messages,username) VALUES ('1743','foo(a)spam.dom') ON DUPLICATE KEY UPDATE messages='1743'; UPDATE table SET bytes=bytes-14433,messages=messages-2 WHERE username = 'foo(a)spam.dom';

2 2

[Dovecot] Dovecot-2.1.8 process imap crashed
by Marcin Mirosław 18 Jul '12

18 Jul '12

Hello! I've just upgraded dovecot from 2.0.18 to 2.1.8 and configured impac. I notice dovecot/imap throws segfault from time to time. I'm not sure i know what steps are needed to reproduce problem. I'm using gentoo, hardened-kernel-3.4.2. Namespaces (and settings for imapc) are keept in database so i'm not sure doveconf would be useful. If would be needed please let me know. Thanks Marcin Core was generated by `dovecot/imap'. Program terminated with signal 11, Segmentation fault. #0 0x000002d0fbf908a2 in mail_storage_set_internal_error (storage=0x0) at mail-storage.c:466 466 mail-storage.c: No such file or directory. in mail-storage.c (gdb) bt #0 0x000002d0fbf908a2 in mail_storage_set_internal_error (storage=0x0) at mail-storage.c:466 #1 0x000002d0fbf5f025 in imapc_noop_callback (reply=<optimized out>, context=<optimized out>) at imapc-storage.c:691 #2 0x000002d0fbf5f07a in imapc_idle_noop_callback (reply=<optimized out>, context=0x2b466158c0) at imapc-storage.c:713 #3 0x000002d0fbf6208a in imapc_connection_abort_commands (conn=0x2b46579c10, disconnected=<optimized out>, keep_retriable=<optimized out>) at imapc-connection.c:271 #4 0x000002d0fbf624be in imapc_connection_disconnect (conn=0x2b46579c10) at imapc-connection.c:371 #5 0x000002d0fbf636b9 in imapc_connection_deinit (_conn=0x2b46579b20) at imapc-connection.c:178 #6 0x000002d0fbf60113 in imapc_client_deinit (_client=0x2b4655b6e8) at imapc-client.c:111 #7 0x000002d0fbf5ea77 in imapc_storage_destroy (_storage=<optimized out>) at imapc-storage.c:275 #8 0x000002d0fbf90600 in mail_storage_unref (_storage=0x2b46558910) at mail-storage.c:417 #9 0x000002d0fbf8a259 in mail_namespace_free (ns=0x2b465588c0) at mail-namespace.c:37 #10 0x000002d0fbf8a784 in mail_namespaces_deinit (_namespaces=0x2b4654c9e8) at mail-namespace.c:437 #11 0x000002d0fbf95311 in mail_user_deinit_base (user=0x2b4654c970) at mail-user.c:29 #12 0x000002d0f940f658 in stats_user_deinit (user=0x2b4654c970) at stats-plugin.c:506 #13 0x000002d0fa86b619 in quota_user_deinit (user=0x2b4654c970) at quota-storage.c:412 #14 0x000002d0fbf95597 in mail_user_unref (_user=<optimized out>) at mail-user.c:153 #15 0x0000002b4461b58e in client_destroy (client=0x2b465891d0, reason=0x0) at imap-client.c:219 #16 0x0000002b44615552 in idle_client_input (ctx=<optimized out>) at cmd-idle.c:113 #17 0x000002d0fbce3767 in io_loop_call_io (io=0x2b46622ff0) at ioloop.c:379 #18 0x000002d0fbce469a in io_loop_handler_run (ioloop=<optimized out>) at ioloop-epoll.c:213 #19 0x000002d0fbce3054 in io_loop_run (ioloop=0x2b46525aa0) at ioloop.c:398 #20 0x000002d0fbccc446 in master_service_run (service=0x2b46525950, callback=<optimized out>) at master-service.c:543 #21 0x0000002b44624e76 in main (argc=1, argv=0x2b46525790) at main.c:389 (gdb) bt full #0 0x000002d0fbf908a2 in mail_storage_set_internal_error (storage=0x0) at mail-storage.c:466 str = 0x2b4651e840 "Internal error occurred. Refer to server log for more information. [2012-07-17 16:06:09]" #1 0x000002d0fbf5f025 in imapc_noop_callback (reply=<optimized out>, context=<optimized out>) at imapc-storage.c:691 storage = <optimized out> #2 0x000002d0fbf5f07a in imapc_idle_noop_callback (reply=<optimized out>, context=0x2b466158c0) at imapc-storage.c:713 mbox = 0x2b466158c0 #3 0x000002d0fbf6208a in imapc_connection_abort_commands (conn=0x2b46579c10, disconnected=<optimized out>, keep_retriable=<optimized out>) at imapc-connection.c:271 cmdp = 0x2b4651e808 cmd = 0x2b466116a0 tmp_array = {arr = {buffer = 0x2b4651e7c8, element_size = 8}, v = 0x2b4651e7c8, v_modifiable = 0x2b4651e7c8} reply = {state = IMAPC_COMMAND_STATE_DISCONNECTED, resp_text_key = 0x0, resp_text_value = 0x0, text_full = 0x2d0fbfe768e "Disconnected from server", text_without_resp = 0x2d0fbfe768e "Disconnected from server"} #4 0x000002d0fbf624be in imapc_connection_disconnect (conn=0x2b46579c10) at imapc-connection.c:371 reconnecting = false #5 0x000002d0fbf636b9 in imapc_connection_deinit (_conn=0x2b46579b20) at imapc-connection.c:178 No locals. #6 0x000002d0fbf60113 in imapc_client_deinit (_client=0x2b4655b6e8) at imapc-client.c:111 client = 0x2b4655c6e0 connp = 0x2b4655c840 __FUNCTION__ = "imapc_client_deinit" #7 0x000002d0fbf5ea77 in imapc_storage_destroy (_storage=<optimized out>) at imapc-storage.c:275 storage = <optimized out> #8 0x000002d0fbf90600 in mail_storage_unref (_storage=0x2b46558910) at mail-storage.c:417 storage = 0x2b4655b5e0 __FUNCTION__ = "mail_storage_unref" #9 0x000002d0fbf8a259 in mail_namespace_free (ns=0x2b465588c0) at mail-namespace.c:37 No locals. #10 0x000002d0fbf8a784 in mail_namespaces_deinit (_namespaces=0x2b4654c9e8) at mail-namespace.c:437 ns = <optimized out> next = 0x2b46550dd0 #11 0x000002d0fbf95311 in mail_user_deinit_base (user=0x2b4654c970) at mail-user.c:29 No locals. #12 0x000002d0f940f658 in stats_user_deinit (user=0x2b4654c970) at stats-plugin.c:506 suser = 0x2b4654e8c8 stats_conn = 0x2b46552170 __FUNCTION__ = "stats_user_deinit" #13 0x000002d0fa86b619 in quota_user_deinit (user=0x2b4654c970) at quota-storage.c:412 quser = 0x2b4654e890 quota_set = 0x2b46551190 #14 0x000002d0fbf95597 in mail_user_unref (_user=<optimized out>) at mail-user.c:153 user = 0x2b4654c970 __FUNCTION__ = "mail_user_unref" #15 0x0000002b4461b58e in client_destroy (client=0x2b465891d0, reason=0x0) at imap-client.c:219 cmd = <optimized out> __FUNCTION__ = "client_destroy" #16 0x0000002b44615552 in idle_client_input (ctx=<optimized out>) at cmd-idle.c:113 ---Type <return> to continue, or q <return> to quit--- client = 0x2b465891d0 #17 0x000002d0fbce3767 in io_loop_call_io (io=0x2b46622ff0) at ioloop.c:379 ioloop = 0x2b46525aa0 t_id = 2 #18 0x000002d0fbce469a in io_loop_handler_run (ioloop=<optimized out>) at ioloop-epoll.c:213 ctx = 0x2b46525e10 events = <optimized out> event = 0x2b46525e80 list = 0x2b465a80a0 io = <optimized out> tv = {tv_sec = 5, tv_usec = 999824} msecs = <optimized out> ret = 1 i = <optimized out> j = <optimized out> call = <optimized out> #19 0x000002d0fbce3054 in io_loop_run (ioloop=0x2b46525aa0) at ioloop.c:398 No locals. #20 0x000002d0fbccc446 in master_service_run (service=0x2b46525950, callback=<optimized out>) at master-service.c:543 No locals. #21 0x0000002b44624e76 in main (argc=1, argv=0x2b46525790) at main.c:389 set_roots = {0x2b4482ad60, 0x0} login_set = {auth_socket_path = 0x2b4651d498 "/var/run/dovecot/auth-master", postlogin_socket_path = 0x0, postlogin_timeout_secs = 60, callback = 0x2b44624804 <login_client_connected>, failure_callback = 0x2b446244fd <login_client_failed>} service_flags = <optimized out> storage_service_flags = MAIL_STORAGE_SERVICE_FLAG_DISALLOW_ROOT username = 0x0 c = <optimized out>

2 2

[Dovecot] expire-tool stops on first box with nothing to expire in it
by Michael Wessel 18 Jul '12

18 Jul '12

Hi, I'm running dovecot 1.2.11 on Centos and have the expire plugin enabled. I've had this in place for some time but until now never actually ran the expire-tool. I'm now trying to put this to use. The expire plugin as such is working fine and also the tool is working fine - up to a point. When I run it with --test it goes through a bunch of boxes and lists the messages it would expunge and the new date being logged at the end. As soon as it hits the first box that has nothing in it that's expired however, it stops and goes no further. As an example here are the last two lines of the output when I just ran it: Info: user(a)domain.com/Trash: timestamp 1342320464 (Sat Jul 14 19:47:44 2012) -> 1342937319 (Sat Jul 21 23:08:39 2012) Info: nextuser(a)domain.com/Trash: stop, expire time in future: Sat Jul 14 20:41:49 2012 If I run it again after the indicated expire time it will now also go through the nextuser(a)domain.com but then again stop as soon as it encounters another user with nothing to expire. As far as I can tell the same happens when I actually run the tool. Harder to tell of course as there is no output, but I can tell that not all boxes are expunged as they should be. Any ideas why this would be? Any way to get debug logging on this? Michael

2 2

[Dovecot] Compile issue Dovecot 2.1.8, OS X 10.6.x
by Jim 18 Jul '12

18 Jul '12

Hey all. I'm running Mac OS X 10.6.4, and had Dovecot 2.0.7 installed built from source. I'm now wanting to upgrade to Dovecot 2.1.8, but I can't get MAKE to finish without errors: ./configure --with-mysql (snip) Install prefix . : /usr/local File offsets ... : 64bit I/O polling .... : kqueue I/O notifys .... : kqueue SSL ............ : yes (OpenSSL) GSSAPI ......... : no passdbs ........ : static passwd passwd-file pam checkpassword sql : -shadow -bsdauth -sia -ldap -vpopmail userdbs ........ : static prefetch passwd passwd-file checkpassword sql : -ldap -vpopmail -nss SQL drivers .... : mysql : -pgsql -sqlite Full text search : squat : -lucene -solr sudo make (snip) Undefined symbols: "_libiconv_open", referenced from: _charset_to_utf8_begin in libcharset.a(charset-iconv.o) "_libiconv", referenced from: _charset_to_utf8_reset in libcharset.a(charset-iconv.o) _charset_to_utf8 in libcharset.a(charset-iconv.o) "_libiconv_close", referenced from: _charset_to_utf8_end in libcharset.a(charset-iconv.o) ld: symbol(s) not found collect2: ld returned 1 exit status make[3]: *** [libdovecot.la] Error 1 make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 The reason for the 'sudo make' was to get around a permissions issue, but I don't think that's related to my issue here. I had build Dovecot 2.0.7 and earlier without issue on this system, but I'm a bit stumped on this particular problem. I also found that the configure parameter --with-sql-drivers no longer seems to work, even though it's still shown in the wiki for 2.x. As far as I can tell, I had used this parameter when compiling 2.0.7.

2 4

[Dovecot] Different LDAP filters for different protocols
by James Devine 18 Jul '12

18 Jul '12

Is it possible to query LDAP differently for different protocols? I am using dovecot for both pop3/imap and lmtp deliveries and there are different enable flags in ldap for them. I tried wrapping user_filter inside the protocols in the file dovecot-ldap.conf.ext as shown below but this didn't seem to work. protocol lmtp { user_filter = (&(objectClass=posixAccount)(cn=%u)(active=1)(msmtp=1)) } protocol imap { user_filter = (&(objectClass=posixAccount)(cn=%u)(active=1)(mpop=1)) } protocol pop3 { user_filter = (&(objectClass=posixAccount)(cn=%u)(active=1)(mpop=1)) }

1 1

[Dovecot] outlook and redirect sieve
by Lazy 18 Jul '12

18 Jul '12

Hi Aall, we are having issues with outlook clients, running exchange or lotus being unable to parse the email messages redirected by dovecot's sieve 0.3.1, the command is plain redirect "email(a)lotusmail.xxx"; redirects from mta also work correctly exchange was fixed by removing this commit http://hg.rename-it.nl/dovecot-2.1-pigeonhole/raw-diff/082216ad12d6/src/lib… are there any other modifications to the email body or headers that can make those mesages not parsable for outlook ? looking at http://hg.rename-it.nl/dovecot-2.1-pigeonhole/raw-diff/082216ad12d6/src/lib… maybe removing HEADER_FILTER_NO_CR fromi_stream_create_header_filter() will make redirected messages more in tact ? what can I do to make redirect more verbatim ? Thanks in advance for any information. Regards, Michal Grzedzicki

2 3

[Dovecot] Selective TLS per local IP
by Robert Blayzor 17 Jul '12

17 Jul '12

We have the requirement to provide SSL on some IP addresses, but not others on our servers. Providing SSL is the easy part and we're able to use multiple SSL certificates now. (thanks Timo!) All is working ok, but we several IP hosts that do not require SSL and do not have valid certificates. While we can limit access via a firewall ACL to TLS connect ports (993/995) we can't do so on port 110/143. The problem is that some clients now are smart enough to look for an offered STARTTLS or STLS, and if it's offered, they try to use it. While not normally a problem if your setup for SSL with valid key/certs, if you have a self signed or no CERT at all, it starts connection warnings and errors on the client side. So is there any way possible to turn off advertising of TLS on port or turn it off/on per IP? Something like: ssl = yes ssl_cert = </etc/ssl/cert/default.pem ssl_key = </etc/ssl/cert/default.pem local 10.1.1.1 { protocol imap { ssl_cert = </etc/ssl/cert/site1.pem ssl_key = </etc/ssl/cert/site1.pem } protocol pop3 { ssl_cert = </etc/ssl/cert/site1.pem ssl_key = </etc/ssl/cert/site1.pem } } local 10.1.1.2 { ssl = no } *or* ssl = no local 10.1.1.1 { ssl = yes protocol imap { ssl_cert = </etc/ssl/cert/site1.pem ssl_key = </etc/ssl/cert/site1.pem } protocol pop3 { ssl_cert = </etc/ssl/cert/site1.pem ssl_key = </etc/ssl/cert/site1.pem } } -- Robert Blayzor INOC, LLC rblayzor(a)inoc.net http://www.inoc.net/~rblayzor/

2 4

[Dovecot] files missed from install
by Tim Dickson 17 Jul '12

17 Jul '12

version: using dovecot 2.1.8 or 2.0.12 bug: installation - some files missed details: dovecot-openssl.cnf and mkcert.sh are not copied from the src/doc folder to the installation doc folder on installation (make install) both are referred to in the documentation and are useful. is there any chance of updating the build scripts to include these files? thanks, Tim

3 3

[Dovecot] [PATCH] Interop problem with Cyrus SASL and GSSAPI
by Ben Morrow 17 Jul '12

17 Jul '12

[I sent this a while ago, but it seems not to have made it to the list. I'm resending it having subscribed first; I apologise if anyone get it twice.] I have been trying to get a Postfix mail server using Dovecot SASL to accept GSSAPI AUTH from another Postfix server using Cyrus SASL, and I believe I have found a couple of bugs in Dovecot's GSSAPI implementation. The first problem is that, because of the way the client invokes libsasl, it sends a GSSAPI request which does not ask for mutual authentication. This means that on the server gss_accept_sec_context returns GSS_S_COMPLETE with a zero-length output token. Dovecot currently sends this to the client as a zero-length continuation response, but this is incorrect according to RFC 4752: what it ought to do instead is proceed straight to the security layer negotiations, and send a gss_wrap packet. The second is that Cyrus sends an empty authz identity; that is, the security layer negotiation packet, when gss_unwrapped, is exactly 4 bytes long. Dovecot objects to this, but in RFC 4422 this is explicitly allowed, and means the authz identity is identical to the authn identity. I believe the attached patches (for the 1.2 and 2.1 branches) fix the problem, though I'm not entirely sure if the difference between the p_strndup in mech_gssapi_unwrap and the t_strndup in get_display_name is important. Ben

2 1

[Dovecot] Timeout (180s) while waiting for lock for transaction log file
by Angel L. Mateo 17 Jul '12

17 Jul '12

Hello, We still have problems with our updated dovecot servers... The problem now is that we are having errors like: Jul 9 10:22:02 myotis31 dovecot: lmtp(15431, <user>): Error: Timeout (180s) while waiting for lock for transaction log file /var/indexes/<user>/.INBOX/dovecot.index.log Jul 9 10:22:02 myotis31 dovecot: lmtp(15431, <user>): Error: +4YfCwKS+k9HPAAAmo+UlA: sieve: msgid=<4FFA8700.2080003(a)um.es>: failed to store into mailbox 'INBOX': Internal error occurred. Refer to server log for more information. [2012-07-09 10:19:02] Jul 9 10:22:02 myotis31 dovecot: lmtp(15431, <user>): Error: +4YfCwKS+k9HPAAAmo+UlA: sieve: script /home/pdi/88/185188/.dovecot.sieve failed with unsuccessful implicit keep (user logfile /home/pdi/88/185188/.dovecot.sieve.log may reveal additional details) in the .dovecot.sieve.log all we have is just: sieve: info: started log at Jul 09 10:22:02. error: msgid=<4FFA8700.2080003(a)um.es>: failed to store into mailbox 'INBOX': Internal error occurred. Refer to server log for more information. [2012-07-09 10:19:02]. maildir are in a nfs storage, but indexes are in local disk. I don't know if the problem could be related with a some "specific" messages or something specific to the user, because we are having this problem only with a few users and the problem repeatedly happens when our mta tries to deliver the queued message. Any idea? -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información y las Comunicaciones Aplicadas (ATICA) http://www.um.es/atica Tfo: 868887590 Fax: 868888337

2 1

[Dovecot] quota fs: Support for hardlimit quotas (where softquota is unset)
by Jan Friesse 17 Jul '12

17 Jul '12

Hi, included is patch which adds support for calculating fs quota from hardlimit where softlimit is unset. I'm usually not setting softlimit on my server causing dovecot work incorrectly (not reporting quota at all). Regards, Jan Friesse

2 1

[Dovecot] Feature request
by Malloc Kilobyte 17 Jul '12

17 Jul '12

Hi, I am implementig Dovecot as a part of my new e-mail server, which is aimed to be replacement for proprietary software I've been using sofar. Appreciating all Dovecot rich features, I lack just one. And this is the ability to customize the "quota exceeded, message rejected" message. I know I can set it's default content using quota_exceeded_message parameter, but i would also like to have ability to set: - to whom the message is sent. Some mail systems send copy not only to the sender, but also to the recipient. It makes sense in case rejected message has big size. - it's subject - if the rejected message is being attached ( with or without it's own attachments ) or not Moreover, I think it would make sense if the "rejected messege" contained information about size of rejected message and current mailbox space usage. Please, consider this in future development. with regards and respect to the tremendousness of Dovecot, -- malloc4k

5 5

[Dovecot] LDAP.conf filter issue
by Tony Hlabse 17 Jul '12

17 Jul '12

All, We are trying to use the user_filter options to limit authentication to a single user group. The cusotmer has security rules that they want to only have users belonging to a group to have access. Sample we have tried. auth_bind = yes auth_bind_userdn = EXAMPLE\%n base = / hosts = example.test.com ldap_version = 3 user_filter = (&(sAMAccountName=)(memberOf=CN=LR3BCC-DL,OU=Autonomy,OU=Exchange,OU=Enterprise Administration,DC=example,DC=test,DC=com)) Thanks Tony

2 1

[Dovecot] dovecot 2.1.8 still tries to touch any mountpoint
by Reindl Harald 17 Jul '12

17 Jul '12

why does dovecot touch any ever used fuse-mountpoint and scream at the next start that is no longer mounted? "If this is intentional, remove it with doveadm mount" why if i never called "doveadm" on any setup at all? Jul 10 09:10:56 rh dovecot: master: Dovecot v2.1.8 starting up (core dumps disabled) Jul 10 09:10:56 rh dovecot: master: Warning: /sys/fs/cgroup/cpu is no longer mounted. If this is intentional, remove it with doveadm mount Jul 10 09:10:56 rh dovecot: master: Warning: /sys/fs/cgroup/cpuacct is no longer mounted. If this is intentional, remove it with doveadm mount Jul 10 09:10:56 rh dovecot: master: Warning: /var/run/vmblock-fuse is no longer mounted. If this is intentional, remove it with doveadm mount Jul 10 09:10:56 rh dovecot: master: Warning: /mnt/arrakis is no longer mounted. If this is intentional, remove it with doveadm mount Jul 10 09:10:56 rh dovecot: master: Warning: /mnt/loungebackup is no longer mounted. If this is intentional, remove it with doveadm mount Jul 10 09:10:56 rh dovecot: master: Warning: /mnt/panel is no longer mounted. If this is intentional, remove it with doveadm mount Jul 10 09:10:56 rh dovecot: master: Warning: /mnt/proxy is no longer mounted. If this is intentional, remove it with doveadm mount

3 4

[Dovecot] doveadm director status username != doveadm director status username@mailserver
by Joseba Torre 17 Jul '12

17 Jul '12

Hi, I've almost finished my new director based setup, but in the first test I discovered that imap and lmtp connections were not always being proxied to the same server. After some research now I think that the main problem is that in imap connections users connect as 'username' while lmtp connections are as 'username@mailserver'. In my current setup I receive mail via SMTP in my director servers (which are loadbalanced by a CISCO machine), and then they send them to dovecot running on localhost. I've tried to get rid of the @mailserver in postfix in a generic way with no success. Is there any way to redirect connections based only in the local part of the address? Or there is a way to get rid of the @mailserver in the postfix -> lmtp connection? Both doveadm config -n and postconf -n are attached. Thanks. $ doveadm config -n # 2.1.8: /usr/local/etc/dovecot/dovecot.conf # OS: Linux 2.6.32-220.17.1.el6.x86_64 x86_64 Red Hat Enterprise Linux Server release 6.2 (Santiago) auth_debug = yes auth_master_user_separator = * auth_verbose = yes director_mail_servers = buzones2.ehu.es buzones3.ehu.es director_servers = director1.ehu.es director2.ehu.es doveadm_proxy_port = 4444 lmtp_proxy = yes mail_debug = yes managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave passdb { args = proxy=y nopassword=y starttls=any-cert driver = static } protocols = imap pop3 lmtp sieve service auth { unix_listener auth-userdb { user = dovecot } } service director { fifo_listener login/proxy-notify { mode = 0666 } inet_listener { port = 3333 } unix_listener director-userdb { mode = 0600 } unix_listener login/director { mode = 0666 } } service doveadm { inet_listener { port = 4444 } } service imap-login { executable = imap-login director } service lmtp { inet_listener ltmp { address = director2.ehu.es 127.0.0.1 port = 24 } unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0660 user = postfix } } service managesieve-login { executable = managesieve-login director vsz_limit = 128 M } service pop3-login { executable = pop3-login director } ssl_cert = </etc/ssl/private/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem syslog_facility = local1 userdb { args = allow_allusers=yes driver = static } protocol lmtp { auth_socket_path = director-userdb mail_plugins = " sieve" syslog_facility = local2 } protocol doveadm { auth_socket_path = director-userdb } $ postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases canonical_maps = hash:/etc/postfix/canonical command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix data_directory = /var/lib/postfix debug_peer_level = 2 html_directory = no inet_interfaces = all inet_protocols = all local_destination_concurrency_limit = 10 local_recipient_maps = ldap:/etc/postfix/ldap-local-recipients.cf proxy:unix:passwd.byname $alias_maps mail_owner = postfix mailbox_transport = lmtp:inet:localhost:24 mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man message_size_limit = 15000000 mydestination = ehu.es, mailsever.ehu.es, othermailserver.ehu.es mydomain = ehu.es myhostname = director1.ehu.es mynetworks_style = host myorigin = $mydomain newaliases_path = /usr/bin/newaliases.postfix queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.6.6/README_FILES relayhost = [smtp.ehu.es] sample_directory = /usr/share/doc/postfix-2.6.6/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop unknown_local_recipient_reject_code = 550

3 4

Re: [Dovecot] doveadm director status username != doveadm director status username@mailserver
by Joseba Torre 17 Jul '12

17 Jul '12

El 17/07/12 13:34, Lee Standen escribió: > One thing that stands out to me is the lack of passdb. One of the > recommendations I got from the passdb documentation was to override the > user field, so the user is always logged in consistently. Without this, > "BOB", "bob" and "bob(a)mydomain.com <mailto:bob@mydomain.com>" might all > accept auth, but be handled differently! If you configure your passdb, > then you'll get some consistency, which will probably fix your director > problem. We don't use passdb in the directors because incoming mails have already been checked by postfix, and the final mail server need to check our ldap server for other values, so we check there. Actually, I still feel that I can override some ldap connections if I think about it carefully. Thank you. > > At the very least, you probably want to lowercase all your usernames. >

1 0

[Dovecot] different mail_max_userip settings
by Federico Bianchi 17 Jul '12

17 Jul '12

Is it possible to have mail_max_userip set to a value for localhost (webmail) and to another value for everything else? Best regards Federico Bianchi Dipartimento di Storia delle Arti Universita` di Pisa via Trieste, 38 - I-56126 Pisa (Italy) tel.(+39) 050 221 6 024; fax (+39) 050 221 6 001 e-mail: <f.bianchi(a)arte.unipi.it> =================================================== !DISCLAIMER!: my e-mail reflects _my_own_ opinions! ===================================================

3 3

[Dovecot] Seq-range order in sequence-set are matter?
by Lay András 17 Jul '12

17 Jul '12

Hi! I have a mailbox with 12 messages. Theese two commands: x fetch 5,8:12 (UID) * 5 FETCH (UID 10) * 8 FETCH (UID 13) * 9 FETCH (UID 14) * 10 FETCH (UID 15) * 11 FETCH (UID 16) * 12 FETCH (UID 17) x OK Fetch completed. and x fetch 8:12,5 (UID) * 5 FETCH (UID 10) * 8 FETCH (UID 13) * 9 FETCH (UID 14) * 10 FETCH (UID 15) * 11 FETCH (UID 16) * 12 FETCH (UID 17) x OK Fetch completed. outputs are equeal, this clean. But: x fetch 1:*,5 (UID) * 1 FETCH (UID 4) * 2 FETCH (UID 5) * 3 FETCH (UID 6) * 4 FETCH (UID 7) * 5 FETCH (UID 10) * 6 FETCH (UID 11) * 7 FETCH (UID 12) * 8 FETCH (UID 13) * 9 FETCH (UID 14) * 10 FETCH (UID 15) * 11 FETCH (UID 16) * 12 FETCH (UID 17) x OK Fetch completed. and x fetch 5,1:* (UID) * 5 FETCH (UID 10) * 6 FETCH (UID 11) * 7 FETCH (UID 12) * 8 FETCH (UID 13) * 9 FETCH (UID 14) * 10 FETCH (UID 15) * 11 FETCH (UID 16) * 12 FETCH (UID 17) x OK Fetch completed. command outputs are NOT equal? Why? Thank you! Lay

2 1

[Dovecot] Override userdb=passwd gid
by Veiko Kukk 17 Jul '12

17 Jul '12

Hi! I have problem with Dovecot 2.1.1 writing maildir files as users primary group. Tried to override gid value, but probably i'm missing something... doveconf -n # 2.1.1: /etc/dovecot/dovecot.conf # OS: Linux 2.6.18-308.11.1.el5 x86_64 CentOS release 5.8 (Final) auth_verbose = yes info_log_path = /var/log/dovecot/info.log listen = * log_path = /var/log/dovecot/error.log mail_location = maildir:%h/Maildir passdb { args = cache_key=%u dovecot driver = pam } protocols = imap service imap-login { process_min_avail = 40 service_count = 1 } service imap { process_limit = 2048 vsz_limit = 2 G } ssl = required ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { args = blocking=no gid=mail driver = passwd } Also tried using 'override_fields = gid=mail'. Users are from nss and winbind. Any ideas what i might do wrong? -- Veiko

2 1

[Dovecot] Difference between proxy_refresh and proxy_timeout in director
by Angel L. Mateo 17 Jul '12

17 Jul '12

Hello, I know proxy_timeout is the timeout for the director operation. But what is the purpose for proxy_refresh? -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información _o) y las Comunicaciones Aplicadas (ATICA) / \\ http://www.um.es/atica _(___V Tfo: 868887590 Fax: 868888337

2 1

[Dovecot] imapc: Restrict the number of connections
by René Neumann 17 Jul '12

17 Jul '12

Hi, I have managed to get an imapc connection to another server and bind its contents to only one account (via global ACL). The namespace itself is created as public, though it does not seem to make a difference for this use case (i.e., it does not matter, whether its type is 'public', 'shared', or 'private'). namespace { hidden = no list = children location = imapc: prefix = Gemeinsam. separator = . subscriptions = no type = public } One problem remains: Though there is only one account that is allowed to use this imapc-connection, each imap-process opens a connection to the imapc'd server. Is this caused directly by the imapc_*-definitions in the config? Or is there a way of restricting this to only the account which actually uses it. Used dovecot version: 2.1.8 Thanks, René

2 1

[Dovecot] bcypt availability
by Nick Edwards 17 Jul '12

17 Jul '12

Dear Timo, Do you intend to introduce bcrypt into the built in password schemes? In lew of all these hacks lately many larger companies appear moving this way, we are looking at it too, but dovecot will then be the weakest link in the database security. So, are you planning on this and if so what sort of timeframe / version would you expect it to be in beta ? Nik

5 6

Re: [Dovecot] Issues with Plus addressing and detail part of subaddress.
by Sean Kamath 17 Jul '12

17 Jul '12

On Jul 15, 2012, at 4:34 AM, Charles Marcus wrote: > On 2012-07-15 4:50 AM, Sean Kamath <kamath(a)moltingpenguin.com> wrote: >> Before I dive in and upgrade everything, am I missing something simple? > > dovecot -n output maybe? Certainly (wasn't on the list of "things to put in a post" on the web site, so I missed it): # 2.0.13: /etc/dovecot/dovecot.conf # OS: SunOS 5.10 sun4u base_dir = /var/run/dovecot/ hostname = mail.enoent.net lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes lda_original_recipient_header = X-Original-To lmtp_save_to_detail_mailbox = yes mail_location = sdbox:~/Mail:INDEX=/var/dovecot/indices/%u managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date passdb { driver = pam } plugin { recipient_delimiter = + sieve = ~/.dovecot.sieve sieve_dir = ~/.sieve } protocols = imap sieve ssl_cert = </etc/mail/certs/server.crt ssl_key = </etc/mail/certs/server.key userdb { driver = passwd } protocol lda { mail_plugins = " sieve" } Sean

2 4

[Dovecot] incremental backups of maildir via rsync
by Harald Dunkel 17 Jul '12

17 Jul '12

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi folks, I would like to do incremental backups of the users' maildir directories to a dedicated backup host (using "rsync -SHa" and rsnapshot). Problem is: Dovecot bloats the incremental backup by changing the file names again and again. Is there some way to tell Dovecot to keep meta information separate from the file names? Any helpful comment would be highly appreciated. Harri -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iEYEARECAAYFAlADpIsACgkQUTlbRTxpHjdS+ACgkPRnzRD2jrcz09kQx9jj9j5v Y1UAniJdRa14hc53gLbxkuBPbx5V5BCh =6nvA -----END PGP SIGNATURE-----

4 6

[Dovecot] Last login datetime on accounts
by Robert Blayzor 16 Jul '12

16 Jul '12

I have searching for the best way to tell if a Dovecot user is idle by finding the last time they have logged in. Right now the best way I can tell is to do something like "touch" a file in the users homedir via a post login exec. This seems like a LOT of overhead, to accomplish such a simple task, especially if your doing a lot of dozens of logins per second. Is there an easier/better way? Is there a way to possibly tell Dovecot to refresh the mod time on an index file whenever the user successfully auths or to refresh a separate file in the homedir, ie: ~/.lastlogin (not ~/Maildir/.lastlogin as that would obviously cause some issues) Seems like something that would be far less overhead than calling a shell, execing another command, etc. I'm open to other ideas/alternatives if they are out there! TIA -- Robert Blayzor INOC, LLC rblayzor(a)inoc.net http://www.inoc.net/~rblayzor/

4 4

[Dovecot] Multi Server Exim/Dovecot and NFS
by Robert Blayzor 16 Jul '12

16 Jul '12

In reading the Dovecot NFS WIKI entry: http://wiki2.dovecot.org/NFS It mentions a FreeBSD NFS client caching bug. I believe that bug only exists pre-8.x ? It seems that a patch in the PR notes was MFC'd and made it into 8.x at some point. (at least I checked the source in 8.3 and it was there). So I assume that FreeBSD 8.x mitigates the issue? Maybe not? So our deployment is multi server Dovecot/Exim running on FreeBSD servers, frontended by a layer3 load balancing switch and a NetApp NFSv3 datastore. The only real concern we have right now is race conditions and file write contention on the Dovecot index files. Our original plan was to use Dovecot LMTP on the servers to deliver to the inbox, but that doesn't seem to be recommended as we'll have a number of servers all acting as primary MX for domains and delivering to the same set of mailboxes. So are the Dovecot dotlock file locking mechanisms not enough for multiple servers trying to write/access index files in Maildirs? If we have to deliver straight to the ~/Maildir/new out of Exim, that's fine, also. We're just wondering if there is a added benefit of actually using LMTP. (other than making sure the index are kept the most recent). The other concern we have is client mailbox access. While we can make sessions "sticky" from one IP so they hit the same server, it doesn't help with the person that checks their email via POP from their PC while having their mobile phone access it via IMAP. (obviously from different IP addresses). So I guess there is some possibly index file write contention there as well. (though hopefully this should be rare). I'm curious as to know others experiences with a similar deployment. TIA -- Robert Blayzor INOC, LLC rblayzor(a)inoc.net http://www.inoc.net/~rblayzor/

5 7

[Dovecot] ACL with MySQL dict => full table scans
by Roland Rosenfeld 16 Jul '12

16 Jul '12

Hi! I'm just installing ACL support on 2.1.6. When a user changes these ACLs, this results in a full table scan on the dictionary, that tells dovecot who shares with whom. Here's what queries I see when I run $ doveadm acl delete -u user1 shared/user2/folder user=user1 1: SELECT dummy,to_user,from_user FROM imap_acl_shares 2: SELECT dummy,from_user FROM imap_acl_anyone 3: BEGIN 4: DELETE FROM imap_acl_shares WHERE to_user = 'user1' AND from_user = 'user1' 5: INSERT INTO imap_acl_shares (dummy,to_user,from_user) VALUES ('1','user1','user1') ON DUPLICATE KEY UPDATE dummy='1' 6: DELETE FROM imap_acl_shares WHERE to_user = 'user2' AND from_user = 'user1' 7: INSERT INTO imap_acl_shares (dummy,to_user,from_user) VALUES ('1','user2','user1') ON DUPLICATE KEY UPDATE dummy='1' 8: COMMIT Line 2 is okay, since imap_acl_anyone is always empty (I'm not able to disable this query, otherwise dovecot spawns errors about a missing map, but I can live with this). Don't ask me what lines 4/5 are repeated in 6/7, but these use indexes and I can live with this. But what the hell is line 1? Why doesn't dovecot use a WHERE clause here with either to_user='user1', to_user='user2', from_user='user1', or from_user='user2'? All these WHERE clauses would use an index and speedup the query. Without the WHERE clause I expect 100000 or more results on our production system, which could slow down it massively. Here's my setup: /etc/dovecot/dovecot-dict-sql.conf: connect = host=foo dbname=mail user=imap password=hidden map { pattern = shared/shared-boxes/user/$to/$from table = imap_acl_shares value_field = dummy fields { from_user = $from to_user = $to } } map { pattern = shared/shared-boxes/anyone/$from table = imap_acl_anyone value_field = dummy fields { from_user = $from } } And dovecot -n: # 2.1.6: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-amd64 x86_64 Debian 6.0.5 auth_cache_negative_ttl = 5 mins auth_cache_size = 100 M auth_cache_ttl = 5 mins auth_default_realm = example.com auth_master_user_separator = * auth_mechanisms = plain login auth_verbose = yes dict { acl = mysql:/etc/dovecot/dovecot-dict-sql.conf } disable_plaintext_auth = no listen = * log_timestamp = "%Y-%m-%d %H:%M:%S " mail_fsync = always mail_gid = 999 mail_location = maildir:~/mail mail_plugins = acl quota mail_uid = 999 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave imapflags mmap_disable = yes namespace { list = children location = maildir:%%h/mail:INDEX=~/mail/shared/%%u prefix = shared/%%u/ separator = / subscriptions = no type = shared } namespace inbox { inbox = yes location = prefix = separator = / type = private } passdb { args = /etc/dovecot/passwd.master driver = passwd-file master = yes pass = yes } passdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } plugin { acl = vfile acl_shared_dict = proxy::acl quota = maildir sieve = ~/.dovecot.sieve sieve_dir = ~/mail/sieve sieve_extensions = +imapflags } protocols = imap pop3 sieve service auth { unix_listener auth-master { group = vmail mode = 0600 user = vmail } } service dict { unix_listener dict { group = vmail mode = 0600 user = vmail } } service imap { process_limit = 4000 } service managesieve-login { inet_listener sieve { port = 4190 } } service managesieve { process_limit = 100 } service pop3 { process_limit = 1000 } shutdown_clients = no ssl = no syslog_facility = local2 userdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } verbose_proctitle = yes protocol imap { mail_max_userip_connections = 10 mail_plugins = quota imap_quota acl imap_acl } protocol pop3 { mail_plugins = quota pop3_no_flag_updates = yes pop3_uidl_format = %v.%u } Tschoeeee Roland

1 0

Re: [Dovecot] Maildir messages
by Nick＠5sg.eu 16 Jul '12

16 Jul '12

Hi Wojciech Thanks for your comeback.. > maybe - just as in article below > http://www.bishnet.net/tim/blog/tag/maildir-to-mbox/ > you like archive in such format I'm trying to switch dovecot to MBox, not just make archives. BTW: I use http://yergler.net/projects/one-off/maildir-to-mbox as it's much smaller and very simple to use to make archives. Does anyone else know the correct way to either switch the existing Maildir multiple file format to the single MBox file format. Failing that, though it will mean a LOT of work, how do I get dovecot to work in future in MBox single file format. I've entered 'mail_location = mbox:~/mail:INBOX=/%h/%u' in the 'dovecot.conf', but it still saves each message in a file of its own in the /new /cur /tmp directories ?? -------Original question -------- > Can someone guide me on changing the Maildir messages files > back to the single file format I used to have instead of the > dovecot.index /cur /tmp /new format my newer server currently > has. I'm running dovecot v1.2.9 postfix v2.7 on Ubuntu v10.4 Thanks, Nick. . . . . -- _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ . . . . . . . . ...---... (Stamp Out Spam and Save Our Servers) http://sosNow.ws -=[ do you know morse code ? ]=- . . . . . . . . _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/

2 1

[Dovecot] director: non standart ports at backends
by Костырев Александр Алексеевич 16 Jul '12

16 Jul '12

hello, I'm trying to figure out how to proxy pop3 and pop3s that listens on non-standart ports at backends. For example, pop3 is at 1110 and pop3s at 1995 (on backend side). is it possible? how should I separate this ports in director's config? it's easy for one port: for example lmtp - you just use passdb in protocol lmtp {}

3 5

[Dovecot] Issues with Plus addressing and detail part of subaddress.
by Sean Kamath 16 Jul '12

16 Jul '12

Hi all, So, it's been a while. I'm just ramping back up with Dovecot after a hiatus of a few years. I've been using it fine, complete with Sieve, for about a year, with little or no issues. I finally got around to setting up a second account, to start figuring out how I want to do some plus address filtering. In a nutshell, I want to put mail for foo+bar in foo's 'bar' folder. That's in the wiki. I did this: require ["fileinto", "envelope", "subaddress"]; if header :contains "subject" ["test"] { fileinto "Test"; } if envelope :detail "to" "test" { fileinto "test"; stop; } So, this fails miserably. No error message, nothing in the logs, no nothing. Yet, when I run sieve-test .dovecot.sieve /path/to/testmessage it works just fine. I even run sieve-test -e .dovecot.sieve /path/to/testmessage and it files it just fine into the folder. I tried adding some debug logging, but it looks like vnd.dovecot.debug isn't in my version. I searched the archives, and found a bit about adding (explicitly) the delimiter to the plugin section of 90-sieve.conf. So I did that. I'm running 2.0.13 of dovecot, and pigeonhole 0.2.3 on Solaris 10. Before I dive in and upgrade everything, am I missing something simple? The "test" bit works just fine (and in another account as well), so I think something's just not seeing the detail in subaddressing when mail is delivered (even though it works just fine with sieve-test). Thanks, Sean

3 3

[Dovecot] Migrating with dsync and INBOX.INBOX namespace issue
by Nikolai Schupbach 15 Jul '12

15 Jul '12

I'm working on migrating IMAP users from Mirapoint Message Servers to Dovecot servers. The Mirapoint IMAP server uses INBOX as a namespace for private mailboxes. I created the same namespace in Dovecot, but when I migrate mailboxes dsync seems to ignore/miss the namespace on Mirapoint and I end up with all mailboxes under a INBOX.INBOX hierarchy. Mirapoint Source Server ----------------------- * OK server.name Mirapoint IMAP4 3.8.3-GA server ready 1 LOGIN test(a)test.com test 1 OK User logged in 2 NAMESPACE * NAMESPACE (("INBOX." ".")) (("user." ".")) (("" ".")) 2 OK Completed 3 LIST "" * * LIST () "." "INBOX" * LIST () "." "INBOX.Draft" * LIST () "." "INBOX.Sent" * LIST () "." "INBOX.Trash" 3 OK Completed Running Dsync ------------- # doveadm -v -o imapc_host=server.name imapc_user=test(a)test.com -o imapc_password=test backup -R -u test(a)test.com imapc: dsync(test(a)test.com): Info: INBOX.INBOX.Sent: only in source (guid=7d3c7eaa71cdf47ee8a1192687cda8cd) dsync(test(a)test.com): Info: INBOX.INBOX.Draft: only in source (guid=a6a03ff3d6ec9066b46013f4affb109a) dsync(test(a)test.com): Info: INBOX.INBOX.Trash: only in source (guid=b36f688eae08506001091708006abe5a) dsync(test(a)test.com): Info: INBOX: only in source (guid=c92f64f79f0d1ed01e6d5b314f04886c) Dovecot Destination Server Post Dsync ------------------------------------- * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE AUTH=PLAIN] Dovecot ready. 1 LOGIN test(a)test.com test 1 OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS MULTIAPPEND UNSELECT CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS SPECIAL-USE QUOTA ACL RIGHTS=texk] Logged in 2 NAMESPACE * NAMESPACE (("INBOX." ".")) NIL NIL 2 OK Namespace completed. 3 LIST "" * * LIST (\HasChildren) "." "INBOX" * LIST (\HasNoChildren) "." "INBOX.INBOX.Sent" * LIST (\HasNoChildren) "." "INBOX.INBOX.Trash" * LIST (\HasNoChildren) "." "INBOX.INBOX.Draft" 3 OK List completed. I noticed that Mirapoint IMAP also advertises a third empty namespace and I was wondering if this was causing it, but even if I explicitly set -n "INBOX." I still have the same issue. Below is my doveconf -n output: # 2.1.6: /usr/local/etc/dovecot/dovecot.conf # OS: FreeBSD 9.0-RELEASE-p3 amd64 auth_cache_negative_ttl = 0 auth_verbose = yes default_vsz_limit = 512 M deliver_log_format = subject=%s msgid=%m: %$ disable_plaintext_auth = no imapc_features = rfc822.size mail_gid = vmail mail_home = /mailstore/domains/%d/%n mail_location = mdbox:~/mdbox mail_plugins = quota acl mail_log notify mail_temp_dir = /var/tmp mail_uid = vmail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave spamtest namespace { inbox = yes location = prefix = INBOX. separator = . } passdb { args = /usr/local/etc/dovecot/dovecot-ldap-passdb.conf driver = ldap } plugin { acl = vfile:/usr/local/etc/dovecot/global-acls mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename mail_log_fields = uid box msgid size quota = dict:User quota::file:%h/.dovecot-quota quota_warning = storage=95%% quota-warning 95 %u sieve = ~/.dovecot.sieve sieve_extensions = +spamtest sieve_max_redirects = 32 sieve_spamtest_max_value = 10 sieve_spamtest_status_header = X-Spam-Score sieve_spamtest_status_type = score } service auth-worker { user = $default_internal_user } service auth { client_limit = 5420 unix_listener auth-userdb { group = vmail mode = 0600 user = vmail } user = $default_internal_user } service imap-login { process_min_avail = 12 service_count = 0 vsz_limit = 512 M } service imap { process_limit = 4096 vsz_limit = 512 M } service lmtp { process_min_avail = 12 user = vmail } service pop3-login { process_min_avail = 12 service_count = 0 vsz_limit = 512 M } service pop3 { process_limit = 1024 vsz_limit = 512 M } service quota-warning { executable = script /usr/local/bin/quota-warning unix_listener quota-warning { user = vmail } user = vmail } ssl = no userdb { args = /usr/local/etc/dovecot/dovecot-ldap-userdb.conf driver = ldap } verbose_proctitle = yes protocol imap { mail_max_userip_connections = 50 mail_plugins = quota acl mail_log notify imap_quota imap_acl } protocol lmtp { mail_plugins = quota acl mail_log notify sieve } Any help would be much appreciated. Regards, Nikolai.

1 1

[Dovecot] Maildir messages
by Nick＠5sg.eu 13 Jul '12

13 Jul '12

Hi all, Hopefully, I'm sending this to the right place... Can someone guide me on changing the Maildir messages files back to the single file format I used to have instead of the dovecot.index /cur /tmp /new format my newer server currently has. I'm running dovecot v1.2.9 postfix v2.7 on Ubuntu v10.4 Thanks, Nick. . . . . MU/Webcasting -- _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ . . . . . . . . Please join my Tech MeetUp group that meets in the NYC metro area Webcasting and Video Streaming Network: http://TheWebcasting.net . . . . . . . . _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/

7 13

[Dovecot] imap-login: Panic: epoll_ctl(add, 6) failed: Invalid argument
by Angel L. Mateo 13 Jul '12

13 Jul '12

Hello, More problems (it seems that we won't be able to put our new servers in production). The problem now is that when we reach 1000 dovecot processes we have errors like: Jul 9 12:10:22 myotis31 dovecot: imap-login: Panic: epoll_ctl(add, 6) failed: Invalid argument Jul 9 12:10:22 myotis31 dovecot: imap-login: Fatal: master: service(imap-login): child 32251 killed with signal 6 (core dumps disabled) and server doesn't accept any new connection. Our servers are running in ubuntu 12.04 with kernel 3.2.0-24-generic kernel. I have found a similar problem at https://bugzilla.redhat.com/show_bug.cgi?id=681578 but it is for redhat kernel of series 2.6. Could be the same problem? Any pointer to this problem for ubuntu kernels? Or for generic 3.0 kernels? Any idea? -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información y las Comunicaciones Aplicadas (ATICA) http://www.um.es/atica Tfo: 868887590 Fax: 868888337

3 5