- dovecot - dovecot.org

[Dovecot] dsync error: Unexpected finish reply
by Pavel Volkovitskiy 04 Jan '11

04 Jan '11

Hello! i'm trying to make mails backup with dsync on remote server dsync transfers data but then exits with error: $ dsync -f -u 'test123(a)domain.tld' backup ssh mailuser@backupserver dsync -u 'test123(a)domain.tld' >dsync-local(test123(a)domain.tld): Error: Unexpected finish reply: + >dsync-local(test123(a)domain.tld): Error: Unexpected reply from server: ok i'm using 2.0.8 (89f4e4cdbeac) (2.0.8-0~auto+24) on both sides -- Pavel

1 0

[Dovecot] Converting from Maildir - sdbox
by Marc Perkel 04 Jan '11

04 Jan '11

OK - I thought this was going to be easy. Maybe it is. I'm just not that good at reading directions. Trying to use dsync. Getting this error: Mail locations must use the same virtual mailbox hierarchy separator (specify separator for the default namespace) Currently using maildir. The setup is as follows: mail_uid = mail mail_gid = mail mail_location = maildir:/vhome/%d/home/%n:INDEX=/imap-cache/%d-%n I don't have any namespace setting. Not quite sure what a namespace is or why I need one. This is what I'm trying to run: dsync -u marc(a)perkel.com backup sdbox:/email/%d/home/%n What I'm hoping to do is do a mass conversion while running. Then shut it down - do a second quick pass - and bring it up in sdbox format. Thanks in advance.

2 1

[Dovecot] dovecotpw missing (2.0.8)
by Kristina Clair 04 Jan '11

04 Jan '11

Hello, I just installed dovecot version 2.0.8 from the source tarball. After doing ./configure, make, and make install, I don't have the dovecotpw binary anywhere. It is not in /usr/local/bin or /usr/local/sbin where the other binaries are; I also did a find / for it and don't see it. Is there some configuration flag I'm missing? I read the flags in ./configure --help and nothing seems obviously applicable to me. Is there a cryptography library I could be missing? I have the libs installed for crypt, md5, etc. Thanks, Kristina

2 3

[Dovecot] namespaces and noselect
by Kyle Wheeler 04 Jan '11

04 Jan '11

Hello, I am trying to use two namespaces to create an "archival" directory that is stored as mboxes (the rest of my tree is all stored as maildirs). However, when I add the second namespace, suddenly Dovecot starts emitting, in response to the LIST command, a second version of the INBOX that is marked as \NoSelect. Here are my namespac definitions... am I doing this wrong? namespace { list = yes hidden = no inbox = yes location = maildir:~/Maildir prefix = separator = / type = private } namespace { hidden = yes # do not list as a separate namespace list = no # inbox = no location = mbox:~/Maildir/Archive:LAYOUT=fs:INDEX=~/Maildir/ArchiveIndexes/ prefix = INBOX/Archive/ separator = / type = private } ~Kyle -- If you are going through hell, keep going. -- Winston Churchill

2 5

[Dovecot] Implications of zlib plugin on search operations
by Ralf Hildebrandt 04 Jan '11

04 Jan '11

Right now I'm compressing all mails older than 31 days and larger than 100k in size. But what implications does this compression have on search queries performed by users (user looking for an old mail containing a certain string). -- Ralf Hildebrandt Geschäftsbereich IT | Abteilung Netzwerk Charité - Universitätsmedizin Berlin Campus Benjamin Franklin Hindenburgdamm 30 | D-12203 Berlin Tel. +49 30 450 570 155 | Fax: +49 30 450 570 962 ralf.hildebrandt(a)charite.de | http://www.charite.de

2 2

[Dovecot] Finally upgrading from v1.0.15 to v1.2.16 -- advice please
by Jan-Frode Myklebust 04 Jan '11

04 Jan '11

It's long over due, but now I finally plan on upgrading from v1.0.15 to v1.2.16 on our servers. Would appreciate any comments! We have 7 servers, all running of the same GPFS filesystem. Both maildirs and indexes are stored here. We use dovecot for POP/IMAP and deliver. Currently we're using mysql as authentication source, but want to move to using ldap instead. Can we upgrade one server at a time, or do we need to upgrade all servers at the same time ? http://wiki2.dovecot.org/Upgrading/1.1 says "Index files have slightly changed as well. Upgrading to v1.1 should go transparently, but moving back to v1.0 might again cause some errors." which makes me think we can't have both versions running against the same users ? Also, if we upgrade only one server, should we switch to "mmap_disable=no" on this one, or keep running with "mmap_disable=yes" on all servers ? "NFS users should now set mail_nfs_storage=yes and mail_nfs_index=yes." Does this apply to any shared/networked filesystems, and is this relevant for GPFS ? The sql queries we're doing now is: password_query = select U.Account as user,S.Password as password from Users U, UserSession S where U.Account=S.Account and U.Account='%u' user_query = SELECT 3000 as uid, 3000 as gid, concat(concat('maildir:', MailDir), concat(':INDEX=', replace(MailDir, '/usr/local/atmail/users', '/usr/local/atmail/users/indexes'))) as mail, concat('maildir:storage=', UserQuota) as quota FROM Users WHERE Account = '%u' I plan on doing ldap bind() for authentication: hosts = maildb3.example.net:389 auth_bind = yes ldap_version = 3 base = ou=people,o=%d,o=ISP,o=example,c=net deref = never scope = onelevel user_filter = (&(objectClass=altiboxperson)(uid=%n)) default_pass_scheme = SSHA but the user_query is a challenge.. In LDAP we have: uid = janfrode, ou=people,o=domain1.net,o=ISP,o=example,c=net mail = janfrode(a)domain1.net mailMessageStore = /usr/local/atmail/users/j/a/janfrode(a)domain1.net mailQuota = 1000000 domain = domain1.net userPassword = SSHA-string So, outside of the user_attrs we need: mail_uid = 3000 mail_gid = 3000 But I'm having a hard time understanding how I can use the ldap value mail=/usr/local/atmail/users/j/a/janfrode(a)domain1.net to translate into dovecot's "mail" containing both "maildir:" and "INDEX=". Does the below look correct ? user_attrs = mailMessageStore=mail=maildir:%$:INDEX=/usr/local/atmail/users/indexes/%1u/%1.1u/%u, mailQuota=quota_rule=*:storage=%$ i.e. will it point dovecot at: mail = maildir:/usr/local/atmail/users/j/a/janfrode@domain1.net:INDEX=/usr/local/atmail/users/indexes/j/a/janfrode@domain1.net quota_rule=*:storage=1000000 -jf

2 6

[Dovecot] Vpopmail + Expire Plugin
by Oliver Lehmann 04 Jan '11

04 Jan '11

Hi, I've changed my running qmail/vpopmail/procmail/courier-imap/sqwebmail installation to qmail/vpopmail/siege/dovecot/horde imp. So far, I've got everything running. Authentification with vpopmail as passdb is working, Mail delivery with siege into different Mail folders is working as well. One of the reasons why I switched to dovecot was the expire plugin and right now I'm trying to set it up but I don't get it to run. - I created a MySQL User as advised - I created a database and a table and granted SELECT, INSERT, DELETE, UPDATE privileges for that table to user dovecot # mysql -udovecot -p dovecot Enter password: mysql> desc expires; +--------------+--------------+------+-----+---------+-------+ | Field | Type | Null | Key | Default | Extra | +--------------+--------------+------+-----+---------+-------+ | username | varchar(75) | NO | PRI | NULL | | | mailbox | varchar(255) | NO | PRI | NULL | | | expire_stamp | int(11) | NO | | NULL | | +--------------+--------------+------+-----+---------+-------+ 3 rows in set (0.00 sec) mysql> select * from expires; Empty set (0.00 sec) - I added the following lines to my dovecot.conf: dict { expire = mysql:/usr/local/etc/dovecot/dovecot-dict-sql.conf.ext } plugin { expire = Test expire_dict = proxy::expire } - I created the dovecot-dict-sql.conf.ext # cat /usr/local/etc/dovecot/dovecot-dict-sql.conf.ext connect = host=localhost dbname=dovecot user=dovecot password=XXXX map { pattern = shared/expire/$user/$mailbox table = expires value_field = expire_stamp fields { username = $user mailbox = $mailbox } } # - When restarting dovecot I had a dict error because the socket was owned by root. I changed that so the socket is owned by the user vpopmail. - Then I created a folder "Test" via IMAP for one of my accounts - Then I copied via Horde IMP (so via IMAP) a message to that new folder - I requeried dovecot.expires in my database and it is still empty - I enabled logging for my MySQL DB and with that I found out, that no connect with the "dovecot" user is made at all so of course the table is empty. - I created a siege rule to move a mail directly to that Test folder when a specific Subject is used. lda moves the mail on arrival but still no MySQL connection is made. I've read that doveadm -A must work to get the expire plugin workinj, but it does not: # doveadm search -A mailbox INBOX subject test doveadm(olivleh1): Error: User listing returned failure doveadm: Error: Failed to iterate through some users # The expire plugin is loaded on startup: Jan 04 11:35:50 imap: Debug: Loading modules from directory: /usr/local/lib/dovecot Jan 04 11:35:50 imap: Debug: Module loaded: /usr/local/lib/dovecot/lib20_expire_plugin.so When using doveadm I'm getting a strange error: # doveadm -v expire -A mailbox INBOX subject test doveadm(olivleh1): Fatal: Unknown command 'expire', but plugin expire exists. Try to set mail_plugins=expire Exit 89 # I've no idea how to get it to work. I guess I need your help guys to get it working ;) # dovecot -n # 2.0.7: /usr/local/etc/dovecot/dovecot.conf # OS: FreeBSD 7.3-STABLE i386 auth_debug = yes auth_verbose = yes debug_log_path = /var/log/dovecot/dovecot-debug.log dict { expire = mysql:/usr/local/etc/dovecot/dovecot-dict-sql.conf.ext } disable_plaintext_auth = no first_valid_uid = 89 info_log_path = /var/log/dovecot/dovecot-info.log last_valid_uid = 89 listen = 127.0.0.1 log_path = /var/log/dovecot/dovecot.log mail_debug = yes mail_plugins = " expire" managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date passdb { driver = vpopmail } plugin { expire = Test 1 expire_dict = proxy::expire sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } protocols = imap sieve service auth { unix_listener auth-userdb { group = vchkpw mode = 0600 user = vpopmail } } service dict { unix_listener dict { group = vchkpw mode = 0600 user = vpopmail } } ssl_cert = </usr/local/etc/dovecot/ssl/certs/dovecot.pem ssl_key = </usr/local/etc/dovecot/ssl/private/dovecot.pem userdb { args = quota_template=quota_rule=*:backend=%q driver = vpopmail } protocol lda { debug_log_path = syslog info_log_path = syslog log_path = syslog mail_plugins = " sieve" } ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.

2 7

[Dovecot] X-SAVEDATE & dync & doveadm expunge
by e-frog 04 Jan '11

04 Jan '11

Hello List, After moving the mail store via dsync backup to a different location the following command doveadm expunge -u user mailbox "Trash" savedbefore 10d deleted ALL mails in Trash instead of messages older than 10 days. It looks like X-SAVEDATE is somehow wrong... A fetch 1:* (internaldate x-savedate) * 1 FETCH (INTERNALDATE "28-Dec-2007 14:49:58 +0100" X-SAVEDATE "01-Jan-1970 01:00:00 +0100") A OK Fetch completed. ...while the ctime for this mail is as below: $ ls -lac -rw------- 1 vmail vmail 40851 2010-12-30 19:26 1198963359.P1256Q0M253583.ubuntu-test.localdomain,S=40851:2,S I was assuming that for the maildirs X-SAVEDATE is derived from the message ctime? "01-Jan-1970 01:00:00 +0100" seem to be definitely wrong. Thanks, e-frog $ doveconf -n # 2.0.8 (89936539e3b8): /etc/dovecot/dovecot.conf # OS: Linux 2.6.35-24-generic-pae i686 Ubuntu 10.10 deliver_log_format = msgid=%m: from=%f: %$ dict { dictionary = mysql:/etc/dovecot/dovecot-dict-sql.conf.ext } lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes mail_gid = vmail mail_home = /home/vmail/%Ld/%Ln mail_location = maildir:~/maildir:INDEX=~/index:CONTROL=~/control mail_plugins = quota virtual mail_uid = vmail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date namespace { hidden = no inbox = yes list = yes location = prefix = separator = / subscriptions = yes type = private } namespace { location = virtual:/etc/dovecot/virtual:INDEX=~/control/virtual prefix = virtual/ separator = / subscriptions = no type = private } passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { antispam_backend = spool2dir antispam_spam = Junk antispam_spool2dir_notspam = /home/vmail/learn-ham/%%020lu-%u-%%05luh antispam_spool2dir_spam = /home/vmail/learn-spam/%%020lu-%u-%%05lus antispam_trash = Trash fts = squat fts_squat = partial=4 full=10 quota = dict:user::proxy::dictionary sieve = ~/dovecot.sieve sieve_before = /etc/dovecot/sieve-global/ sieve_dir = ~/sieve } postmaster_address = postmaster(a)ubuntu-test.localdomain protocols = imap lmtp sieve quota_full_tempfail = yes service auth { unix_listener /var/spool/postfix/private/dovecot-auth { group = postfix mode = 0660 user = postfix } unix_listener auth-userdb { mode = 0600 user = vmail } } service dict { unix_listener dict { mode = 0600 user = vmail } } service imap-login { inet_listener imaps { port = 0 } process_min_avail = 2 service_count = 0 } service imap { executable = imap postlogin } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0660 user = postfix } user = vmail } service postlogin { executable = script-login /opt/bin/dovecot-postlogin.sh } ssl = required ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } verbose_proctitle = yes protocol lmtp { mail_plugins = quota virtual sieve } protocol imap { mail_plugins = quota virtual fts fts_squat imap_quota antispam }

2 2

[Dovecot] Automatic Debian Dovecot repository now also includes amd64 binary packages.
by Stephan Bosch 04 Jan '11

04 Jan '11

Hi, I've recently significantly improved the automated Dovecot Debian package builder. At the beginning it only produced i386 binaries for Debian testing. A few weeks back I added a slave builder that builds packages for Debian stable. Today I have extended the slave builder with support for multiple architectures and I've added amd64 binaries to the repository. The master builder still builds packages for testing/i386 every hour. The slaves check for new source packages about 20 minutes later. Read the following wiki page for more information and read it carefully when you are considering to use these packages: http://wiki.dovecot.org/PrebuiltBinaries#Automatically_Built_Packages Also, every day at four 'o clock in the morning, the latest source packages are uploaded to the openSUSE build service, which builds i386/amd64 binaries for several Ubuntu versions (experimental): http://download.opensuse.org/repositories/home:/sbosch:/ Regards, Stephan.

2 2

[Dovecot] dovecot: auth: Fatal: sql_driver_register(mysql): Already registered
by kjhkg kjkjhgkhg 04 Jan '11

04 Jan '11

Hi, i've been using dovecot2 on our server for handling virtual mailboxes and postfix is also using it to examine if a mail has to be delivered locally or not. Recently i upgraded to 2.0.7 (freebsd ports), but it stopped working, says the error in the subject line. Details: [root@postfixjail /usr/local/etc/dovecot]# dovecot --version 2.0.7 [root@postfixjail /usr/local/etc/dovecot]# grep -hv '^ *$#.*$\?$' dovecot.conf conf.d/* protocols = imap pop3 lmtp sieve listen = * dict { quota = mysql:/usr/local/etc/dovecot/dovecot-dict-sql.conf.ext quota_rule2 = Trash:bytes=+100M } mail_location = maildir:~/Maildir passdb { driver = sql args = /usr/local/etc/dovecot/dovecot-sql.conf.ext } userdb { driver = prefetch } userdb { driver = sql args = /usr/local/etc/dovecot/dovecot-sql.conf.ext } ssl = yes ssl_cert = </etc/ssl/dovecot/dovecot.pem ssl_key = </etc/ssl/dovecot/dovecot.pem default_login_user = nobody auth_cache_size = 0 auth_cache_ttl = 0 auth_cache_negative_ttl = 0 mail_plugins = $mail_plugins quota plugin { quota = dict:User quota::proxy::quota } protocol imap { mail_plugins = quota imap_quota } protocol pop3 { mail_plugins = quota } log_path = syslog plugin { } service imap-login { service_count = 1 process_min_avail = 3 inet_listener imap { } inet_listener imaps { } } service pop3-login { service_count = 1 process_min_avail = 3 inet_listener pop3 { } inet_listener pop3s { } } service lmtp { unix_listener lmtp { } } service imap { } service pop3 { } service auth { unix_listener auth-userdb { mode = 0600 user = vmail group = vmail } unix_listener /var/spool/postfix/private/auth { mode = 0660 user = postfix group = postfix } } service auth-worker { } service dict { unix_listener dict { mode = 0600 user = vmail } } protocol lda { mail_plugins = $mail_plugins quota sieve } protocol lmtp { mail_plugins = $mail_plugins quota sieve } service managesieve-login { inet_listener sieve { port = 4190 } service_count = 1 process_min_avail = 2 } service managesieve { process_limit = 1024 process_min_avail = 2 } protocol sieve { managesieve_max_line_length = 65536 } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } [root@postfixjail /usr/local/etc/dovecot]# grep -hv '^ *$#.*$\?$' dovecot-dict-sql.conf.ext connect = host=127.0.0.3 dbname=mailsql user=mailsql password=somepassword map { pattern = priv/quota/storage table = quota2 username_field = username value_field = bytes } map { pattern = priv/quota/messages table = quota2 username_field = username value_field = messages } [root@postfixjail /usr/local/etc/dovecot]# grep -hv '^ *$#.*$\?$' dovecot-sql.conf.ext driver = mysql connect = host=127.0.0.3 dbname=mailsql user=mailsql password=somepassword default_pass_scheme = PLAIN-MD5 user_query = \ SELECT maildir AS home, 'vmail' AS uid, 'vmail' AS gid, \ CONCAT('*:bytes=', quota) AS quota_rule \ FROM mailbox WHERE username = '%u' AND active = 1 password_query = \ SELECT username AS user, password, \ maildir AS userdb_home, \ 'vmail' AS userdb_uid, 'vmail' AS userdb_gid, \ CONCAT('*:bytes=', quota) AS userdb_quota_rule \ FROM mailbox WHERE username = '%u' AND active = 1 iterate_query = SELECT username AS user FROM mailbox [root@postfixjail /usr/local/etc/dovecot]# uname -a FreeBSD postfixjail.mymachine.com 8.2-PRERELEASE FreeBSD 8.2-PRERELEASE #4: Sat Jan 1 23:33:01 CET 2011 root@new.mymachine.com:/usr/obj/usr/src/sys/MYKERNEL amd64 The filesystem is ZFS (is that really needed?) Any help on that? I'm helpless, went to the irc channel, but people told that my configs are right. Cheers, Laszlo

2 3

[Dovecot] Problem with requiring client certificates for external connections
by Frank Crawford 04 Jan '11

04 Jan '11

Folks, I'm trying to configure my dovecot installation to require client certificates for external/Internet connections, while still allowing my local network to not need certificates. This configuration is for Dovecot 2 (2.0.8 in Fedora 14), and I've tried to use the "remote" block to give different definitions for my local network vs the defaults. While most options seem to be set fine, if I set "auth_ssl_require_client_cert" to yes as the default, and reset it to no for my local network, dovecot still requests a client certificate and fails as one is not supplied. Am I correct that it can be reset in a "remote" block, or is it treated differently to other options? In fact do I have the configuration correct, as there doesn't really seem to be anything documenting "remote" or "remote_ip" or related items for Dovecot 2. Related to this, much of the documentation states that the variable is "ssl_require_client_cert", seems to be accepted by ignored, vs "auth_ssl_require_client_cert" which does have some effects. Also, in the configuration dump, it duplicates the netmask. The configuration is below, as generated with "dovecot -n". Regards Frank # 2.0.8: /etc/dovecot/dovecot.conf # OS: Linux 2.6.36.1 x86_64 Fedora release 14 (Laughlin) ext4 auth_ssl_require_client_cert = yes mail_location = maildir:/var/spool/maildir/%u managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date mbox_write_locks = fcntl passdb { driver = pam } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } postmaster_address = postmaster(a)crawford.emu.id.au ssl = required ssl_ca = </etc/pki/CA/cacert.pem ssl_cert = </etc/pki/tls/certs/dovecot.crt ssl_key = </etc/pki/tls/private/dovecot.key ssl_verify_client_cert = yes userdb { driver = passwd } protocol pop3 { pop3_uidl_format = %v.%u } remote 203.16.204.0/24/24 { auth_ssl_require_client_cert = no disable_plaintext_auth = no ssl = no ssl_verify_client_cert = no } remote fdd2:7aad:d478:1::/64/64 { auth_ssl_require_client_cert = no disable_plaintext_auth = no ssl = no ssl_verify_client_cert = no } remote 2001:44b8:62:140::/64/64 { auth_ssl_require_client_cert = no disable_plaintext_auth = no ssl = no ssl_verify_client_cert = no }

3 5

[Dovecot] Courier-mta with Dovecot LDA again
by komodo 04 Jan '11

04 Jan '11

Hi all Sorry for repost, but i don't believe that there is noone who know where the problem can be. At least developers should know :-) I have sent this post once, but without answer. I have setup dovecot lda instead of maildrop on my courier server. Delivery is working, sieve plugin too, but i can't figure out why lda can't send emails via sendmail (vacation). I always get error Error: Sendmail process terminated abnormally, exit status 67 And i know why, but i don't know how to setup lda to make it work . Here is .courier file where is redirect to lda. | /usr/libexec/dovecot/deliver -a $RECIPIENT -f $SENDER But the deliver does not pass recipient address to sendmail. Here is some output of strace execve("/usr/libexec/dovecot/deliver", ["/usr/libexec/dovecot/deliver", "-a", "komodo@somedomain", "-f", "someuser@somedomain"], [/* 22 vars */]) = 0 So it's clear that deliver have those variables, but then i can see this execve("/usr/sbin/sendmail", ["/usr/sbin/sendmail", "-i", "-f", "<>", "--", "someuser@somedomain"], [/* 2 vars */] <unfinished ...> And there is empty -f , so here is the problem. How should i setup this to make it work correctly ? Here is my config [root(a)OVZ.mail ~]# dovecot -n # 2.0.7: /etc/dovecot/dovecot.conf # OS: Linux 2.6.18-194.8.1.el5.028stab070.5 x86_64 CentOS release 5.5 (Final) disable_plaintext_auth = no hostname = ovzmail listen = 10.0.10.34 mail_location = maildir:~/Maildir managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date mbox_write_locks = fcntl namespace { inbox = yes location = prefix = INBOX. separator = . type = private } namespace { location = maildir:/home/shared/Maildir prefix = spam_learner. separator = . type = public } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } protocols = imap sieve ssl_cert = </etc/pki/dovecot/certs/server.pem ssl_key = </etc/pki/dovecot/private/server.pem userdb { driver = prefetch } protocol lda { mail_plugins = " sieve" } protocol imap { mail_max_userip_connections = 40 } Many thanks Martin

3 7

[Dovecot] Quota ignore subfolders
by Héctor Moreno Blanco 04 Jan '11

04 Jan '11

Hello, We have dovecot 2.0.8 in our servers with Scientific Linux SL release 5.2 (Boron). We want to ignore a mailbox and its child mailboxes. A few weeks ago Timo told me to do this in dovecot.conf, create a new namespace which will be the quotaless namespace and edit the quota: namespace { inbox = yes location = prefix = INBOX. separator = . type = private } namespace { location = maildir:%h/Maildir/carpeta1 prefix = carpeta1. separator = . type = private } plugin { quota = maildir:carpeta1:ns=INBOX. quota_warning = storage=75%% /usr/local/dovecot/bin/quota-warning.sh 75 quota_warning2 = storage=90%% /usr/local/dovecot/bin/quota-warning.sh 90 } We also have passdb and userdb with ldap, with dovecot-ldap.conf: pass_filter = (&(objectClass=qmailUser)(uid=%u)(accountActive=TRUE)) pass_attrs = uid=user,userPassword=password, mailQuotaSize=quota_rule=*:bytes=%$ user_attrs = mailMessageStore=home, mailQuotaSize=quota_rule=*:bytes=%$ user_filter = (&(objectClass=qmailUser)(|(mailAlternateAddress=%u)(mail=%u)(uid=%u))(accountActive=TRUE)) We also tried the easy solution which was to indicate a quota rule in order to ignore the mailbox but with no success. It still get every mailbox to calculate the quota. We set mail_debug=yes to see if there was any error, but everything seemed to be ok. Any suggestions? Thank you very much in advanced. Héctor Moreno Blanco. ______________________ This message including any attachments may contain confidential information, according to our Information Security Management System, and intended solely for a specific individual to whom they are addressed. Any unauthorised copy, disclosure or distribution of this message is strictly forbidden. If you have received this transmission in error, please notify the sender immediately and delete it. ______________________ Este mensaje, y en su caso, cualquier fichero anexo al mismo, puede contener informacion clasificada por su emisor como confidencial en el marco de su Sistema de Gestion de Seguridad de la Informacion siendo para uso exclusivo del destinatario, quedando prohibida su divulgacion copia o distribucion a terceros sin la autorizacion expresa del remitente. Si Vd. ha recibido este mensaje erroneamente, se ruega lo notifique al remitente y proceda a su borrado. Gracias por su colaboracion. ______________________

2 1

[Dovecot] Renaming IMAP folders does not affect children
by Johannes Simon 04 Jan '11

04 Jan '11

Hi, we're using dovecot2.0 since August and very happy with it. Just recently Thunderbird users reported problems when renaming folders, and it seems that RFC 2060 (sec. 6.3.5) requires children of a renamed folder to be renamed, too. This however does not happen: Talking IMAP I get: * LIST (\HasChildren) "." "INBOX.NNN1" * LIST (\HasNoChildren) "." "INBOX.NNN1.NNN1a" . rename "INBOX.NNN1" "INBOX.NNN2" * LIST (\HasNoChildren) "." "INBOX.NNN1.NNN1a" * LIST (\HasNoChildren) "." "INBOX.NNN2" There seems to be no problem the filesystem rights, since this works: . rename "INBOX.NNN1.NNN1a" "INBOX.NNN2.NNN1a" * LIST (\HasChildren) "." "INBOX.NNN2" * LIST (\HasNoChildren) "." "INBOX.NNN2.NNN1a" Am I misunderstanding RFC 2060, or is my config wrong (doveconf -n below), or could it be a bug? Cheers, Johannes # 2.0.8 (e030df616faf): /etc/dovecot/dovecot.conf # OS: Linux 2.6.26-2-openvz-amd64 x86_64 Debian 5.0.7 default_client_limit = 2500 default_process_limit = 600 dotlock_use_excl = yes log_timestamp = "%Y-%m-%d %H:%M:%S " login_greeting = Dovecot 2 ready. mail_fsync = always mail_location = maildir:~/Maildir mail_nfs_index = yes mail_nfs_storage = yes mail_plugins = autocreate acl managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date mmap_disable = yes namespace { inbox = yes location = prefix = INBOX. separator = . type = private } namespace { list = yes location = maildir:%%h/Maildir:INDEX=~/Maildir/shared/%%u prefix = INBOX.shared.%%u. separator = . subscriptions = no type = shared } passdb { args = session=yes dovecot driver = pam } plugin { acl = vfile acl_shared_dict = file:/etc/dovecot/dict/shared-mailboxes autocreate = INBOX.Trash autocreate2 = INBOX.Junk autocreate3 = INBOX.Sent autocreate4 = INBOX.Junk_old autocreate5 = INBOX.Drafts autosubscribe = INBOX.Trash autosubscribe2 = INBOX.Junk autosubscribe3 = INBOX.Sent autosubscribe4 = INBOX.Drafts sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } protocols = imap pop3 service auth { unix_listener auth-userdb { mode = 0666 } } service dict { user = dovecot } service imap-postlogin { executable = script-login rawlog /etc/dovecot/postlogin.sh user = root } service imap { executable = imap imap-postlogin } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { args = blocking=yes driver = passwd } protocol imap { mail_max_userip_connections = 50 mail_plugins = autocreate acl imap_acl } protocol pop3 { mail_max_userip_connections = 3 }

2 1

[Dovecot] Doveadm search in public namespaces
by Thomas Leuxner 04 Jan '11

04 Jan '11

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Say I want to create a script to perform some 'doveadm' tasks. Is there any particular reason why "mailbox-guids" would not work for public namespaces? Let's search something to play with: $ doveadm search sentbefore 01-jan-2011 mailbox "Public/Mailing-Lists/Dovecot" adeffe1c8b7ba64bb3770000a998a2df 1021 […] Trying to fetch headers using mailbox-guids *fails*: $ doveadm fetch hdr mailbox-guid adeffe1c8b7ba64bb3770000a998a2df uid 1021 …while it works using mailbox name: $ doveadm fetch hdr mailbox Public/Mailing-Lists/Dovecot uid 1021 Seems odd. Regards Thomas -----BEGIN PGP SIGNATURE----- Version: GnuPG/MacGPG2 v2.0.16 (Darwin) iEYEARECAAYFAk0XSf8ACgkQ+meF/S97aXjqggCbBAL+FFTmHRXwuxLX46vYFclr 42UAn0dSEwvUzZUy8QU/Pvux+UzVdRlB =vWk6 -----END PGP SIGNATURE-----

2 7

[Dovecot] user xxx@mydomain.com doesn't exist
by G.Nau 04 Jan '11

04 Jan '11

new setup of Dovecot 2.0.8 with postfix local users are simply defined as Linux users named xxx, yyy et cetera; IMAP access is fine with that users. Postfix is delivering mails with two domains (to xxx(a)mydomain.com or xxx(a)mydomain.org) and these are rejected by dovecot with 550: user doesn't exist. I've tested the possible usernames with "doveadm user" xxx: okay xxx(a)mydoman.com: "userdb lookup: user xxx(a)mydomain.com doesn't exist" xxx(a)mydoman.org: "userdb lookup: user xxx(a)mydomain.org doesn't exist" Dovecot2 wiki says "Dovecot doesn't care much about domains in usernames" Okay, how to I get dovecot to ignore the domain part (or accept the two defined domains) when mails are delivered from postfix? Or do I have to configure Postfix to strip the domain part before delivering to dovecot? Regards Birte Nauer

2 1

[Dovecot] Unable to solve over quota issue
by Joy 04 Jan '11

04 Jan '11

Dear All, I am using dovecot-lda to deliver the mail but unable to restrict users to recieve mails when quota becomes full. while i am using quota_full_tempfail = no in 15-lda.conf file. following is the output of doveconf -n Note: per user quota is working from ldap and as well global quota defined in 90-quota.conf file .. # 2.0.8: /usr/local/dovecot/etc/dovecot/dovecot.conf # OS: Linux 2.6.26-2-amd64 x86_64 Debian 5.0.7 base_dir = /usr/local/dovecot/var/run/dovecot/ hostname = mx1.example.in log_path = /var/log/imap login_greeting = IMAP and POP Server welcomes you. mail_location = maildir:~/Maildir mail_plugins = quota acl managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date namespace { inbox = yes location = prefix = separator = . type = private } namespace { list = children location = maildir:/home/silvereye.in/public prefix = Public. separator = . subscriptions = yes type = public } passdb { args = /usr/local/dovecot/etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { acl = vfile:/usr/local/dovecot/dovecot-acl/acl autocreate = Sent Items autocreate2 = Drafts autocreate3 = Spam autocreate4 = Deleted Items autocreate5 = Archive autosubscribe = Sent Items autosubscribe2 = Drafts autosubscribe3 = Spam autosubscribe4 = Deleted Items autosubscribe5 = Archive quota = maildir:User quota quota_rule = *:storage=500M quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=80%% quota-warning 80 %u sieve = ~/.dovecot.sieve sieve_after = /usr/local/dovecot/sieve/spf.sieve sieve_before = /usr/local/dovecot/sieve/default.sieve sieve_dir = ~/sieve sieve_global_dir = /usr/local/dovecot/sieve/global/ sieve_global_path = /usr/local/dovecot/sieve/default.sieve } protocols = imap pop3 sieve service imap-login { inet_listener imap { port = 143 } } service imap-postlogin { executable = script-login /usr/local/dovecot/bin/postlogin.sh user = root } service imap { executable = /usr/local/dovecot/libexec/dovecot/imap imap-postlogin } service managesieve-login { inet_listener sieve-obsolete { port = 2000 } } service quota-warning { executable = script /usr/local/dovecot/bin/quota-warning.sh unix_listener quota-warning { user = vmail } user = dovecot } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { args = /usr/local/dovecot/etc/dovecot/dovecot-ldap.conf.ext driver = ldap } protocol sieve { managesieve_logout_format = bytes ( in=%i : out=%o ) } protocol lda { mail_plugins = quota acl sieve quota } protocol imap { mail_plugins = quota acl imap_acl autocreate imap_quota } Please let me know what is wrong with the configuration .. Thanks

3 2

[Dovecot] archiving
by PA 03 Jan '11

03 Jan '11

Hi, recently I installed the newest 2.x version of dovecot working with postfixadmin/mysql and it works great, thanks Timo, however I been reading dovecot's mailing list archived messages and haven't run across a good solution for archiving mail with dovecot. There was mention of using rsync but I was looking for incoming mail to be copied to another folder, maybe called archive J, in real time where the user would have only read access to the messages in the archive folder and the expire plug-in would delete messages older then x number of days. Does anyone have an suggestions on how I can implement this, I would also like to hear how some people were implement archiving if they do it differently. Also as far as shared calendars with dovecot what are my options. Sorry if it's a little off topic. Thanks, Paul

1 0

[Dovecot] dovecot director terminate ssl ?
by Jan-Frode Myklebust 03 Jan '11

03 Jan '11

I plan on putting two dovecot directors in front of our backend dovecot pop/imap servers, instead of our current haproxy loadbalancing of the connections -- but how do we handle SSL in such a setup. Will all SSL be terminated on the directors automatically, and then proxyed plain text, or is there any configuration needed to achieve this ? Does it matter that the directors are v2.0 while the backends are running v1.2 ? -jf

1 1

[Dovecot] RV: Quota ignore subfolders
by Héctor Moreno Blanco 03 Jan '11

03 Jan '11

Please, any help with this issue. Thanks. Héctor Moreno Blanco. -----Mensaje original----- De: dovecot-bounces+hmoreno=gmv.es(a)dovecot.org [mailto:dovecot-bounces+hmoreno=gmv.es@dovecot.org] En nombre de Héctor Moreno Blanco Enviado el: miércoles, 15 de diciembre de 2010 12:48 Para: dovecot(a)dovecot.org Asunto: [Dovecot] Quota ignore subfolders Hello, We have dovecot 2.0.8 in our servers with Scientific Linux SL release 5.2 (Boron). We want to ignore a mailbox and its child mailboxes. A few weeks ago Timo told me to do this in dovecot.conf, create a new namespace which will be the quotaless namespace and edit the quota: namespace { inbox = yes location = prefix = INBOX. separator = . type = private } namespace { location = maildir:%h/Maildir/carpeta1 prefix = carpeta1. separator = . type = private } plugin { quota = maildir:carpeta1:ns=INBOX. quota_warning = storage=75%% /usr/local/dovecot/bin/quota-warning.sh 75 quota_warning2 = storage=90%% /usr/local/dovecot/bin/quota-warning.sh 90 } We also have passdb and userdb with ldap, with dovecot-ldap.conf: pass_filter = (&(objectClass=qmailUser)(uid=%u)(accountActive=TRUE)) pass_attrs = uid=user,userPassword=password, mailQuotaSize=quota_rule=*:bytes=%$ user_attrs = mailMessageStore=home, mailQuotaSize=quota_rule=*:bytes=%$ user_filter = (&(objectClass=qmailUser)(|(mailAlternateAddress=%u)(mail=%u)(uid=%u))(accountActive=TRUE)) We also tried the easy solution which was to indicate a quota rule in order to ignore the mailbox but with no success. It still get every mailbox to calculate the quota. We set mail_debug=yes to see if there was any error, but everything seemed to be ok. Any suggestions? Thank you very much in advanced. Héctor Moreno Blanco. ______________________ This message including any attachments may contain confidential information, according to our Information Security Management System, and intended solely for a specific individual to whom they are addressed. Any unauthorised copy, disclosure or distribution of this message is strictly forbidden. If you have received this transmission in error, please notify the sender immediately and delete it. ______________________ Este mensaje, y en su caso, cualquier fichero anexo al mismo, puede contener informacion clasificada por su emisor como confidencial en el marco de su Sistema de Gestion de Seguridad de la Informacion siendo para uso exclusivo del destinatario, quedando prohibida su divulgacion copia o distribucion a terceros sin la autorizacion expresa del remitente. Si Vd. ha recibido este mensaje erroneamente, se ruega lo notifique al remitente y proceda a su borrado. Gracias por su colaboracion. ______________________ ______________________ This message including any attachments may contain confidential information, according to our Information Security Management System, and intended solely for a specific individual to whom they are addressed. Any unauthorised copy, disclosure or distribution of this message is strictly forbidden. If you have received this transmission in error, please notify the sender immediately and delete it. ______________________ Este mensaje, y en su caso, cualquier fichero anexo al mismo, puede contener informacion clasificada por su emisor como confidencial en el marco de su Sistema de Gestion de Seguridad de la Informacion siendo para uso exclusivo del destinatario, quedando prohibida su divulgacion copia o distribucion a terceros sin la autorizacion expresa del remitente. Si Vd. ha recibido este mensaje erroneamente, se ruega lo notifique al remitente y proceda a su borrado. Gracias por su colaboracion. ______________________

1 0

[Dovecot] Dovecot Quota plugin as Couier quota
by Antonio Perez-Aranda 03 Jan '11

03 Jan '11

I get a similar behavior between dovecot quota plugin and courier quota with the attached patch. When the client change flags, then is forced to recalc. This is because I don't know how to get the changed flags on quota sync method. The courier quota behavior is avoid to count all deleted mails, include "mark as deleted" mails. -- Antonio Pérez-Aranda Alcaide aperezaranda(a)yaco.es Yaco Sistemas S.L. http://www.yaco.es/ C/ Rioja 5, 41001 Sevilla Teléfono +34 954 50 00 57 Fax +34 954 50 09 29

2 2

[Dovecot] 2.0.9?
by John S 03 Jan '11

03 Jan '11

As many changes as the repository has had, isnt it time for 2.0.9?

1 0

[Dovecot] lmtp (xxx@mydomain.yy): Error: user xxx@mydomain.yy: Initialization failed: Namespace '': mbox: mbox requires client_limit=1 for service
by G.Nau 02 Jan '11

02 Jan '11

new Dovecot 2.0.8 installation on Opensuse 11.3 I got the error "lmtp (xxx(a)mydomain.yy) Error: user xxx(a)mydomain.yy: Initialization failed: Namespace '': mbox: mbox requires client_limit=1 for service" while trying to transfer mails by lmtp from postfix to dovecot. I googled and looked on the dovecot wiki about this client_limit issue, but no success. What's the syntax of the client_limit and where to place it? Into which config file? Inside the global namespace doesn't seems to work (error on dovecot start). -What's the side effect of this setting to my IMAP clients? Are multiple imap connections to the same mailbox still possible? Regards Birte Nauer

2 1

[Dovecot] listescape breaks acl plugin
by Jens 02 Jan '11

02 Jan '11

Hi all Without the listescape plugin I see the following things happen: - If I share a mailbox, dovecot-acl-list in Maildir root is updated accordingly. - If I create a subfolder in an already shared mailbox the dovecot-acl file of the parent folder is copied to the new folder and dovecot-acl-list is updated as well. When I activate the "listescape" plugin, this doesn´t happen. Additionally (with listescape enabled), if I create a folder which contains a dot and then share that folder the dovecot-acl-list looses all entries except the first found shared folder without a dot in foldername. I Hope this is not a bug but only a configuration issue. Thanks for any hints in advance and best Regards Jens

1 0

[Dovecot] Shared Folders via Symlinking
by Adrian Mardlin 01 Jan '11

01 Jan '11

Hi folks, I'm trying to set up shared folders via symlinking and have come across a problem. I created a folder for one user, then symlinked it to another. I figured that one thing that is likely to happen at some point is that user 2 is going to decide they don't want to look at that folder any more, and will delete it, so I tried this. Much to my relief, it didn't delete the actual mails, just the symlink. However, it did alter the dovecot.index.cache file to indicate that the folder had been removed, and subsequent attempts to select this folder via the primary user resulted in an error, "NO Mailbox was deleted under us". I had to delete dovecot.index.cache to get it working again. Sorry - can't bring myself to call folders mailboxes... ;-) Adrian Mardlin in charge @ The Very Good Email Company t 01442 892641 m 07920 102401 f 01442 808081 w www.verygoodemail.com The content of this email and any attachment is private and may be legally privileged. If you are not the intended recipient, any use, disclosure, copying or forwarding of this email and/or its attachments is unauthorised. If you have received this email in error please notify the sender by email and delete this message and any attachments immediately from this system. The Very Good Email Company is a trading style of APM Internet Limited. APM Internet Limited is a limited company incorporated in England and Wales with registration number 04601087 and whose registered office is at Charter Court, Midland Road, Hemel Hempstead, Hertfordshire HP2 5GE

2 4

[Dovecot] Sieve rule issue with certain character sets
by Thomas Leuxner 01 Jan '11

01 Jan '11

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I have a global sieve rule in place to filter mailing-lists. This has worked well so far. Recently however one subscriber on a list seems to create strange character set encodings in the 'From' and 'To' headers. This leads to unprocessed/unfiltered mails (no errors thrown). Is this a configuration or Pigeonhole issue (latest HG used)? Headers from failing mail: From: "=?UTF-8?B?VG9yaW50aGllbA==?=" <user(a)domain.tld> To: "=?UTF-8?B?ImJpbmQtdXNlcnNAbGlzdHMuaXNjLm9yZyI=?=" <bind-users(a)lists.isc.org> Relevant sieve rule: if allof (address :is ["To","CC"] ["bind-users(a)lists.isc.org","bind-users(a)isc.org","comp-protocols-dns-bind(a)isc.org"], header :contains "List-Id" "bind-users.lists.isc.org") { fileinto "Public/Mailing-Lists/Bind-Users"; } Regards Thomas -----BEGIN PGP SIGNATURE----- Version: GnuPG/MacGPG2 v2.0.16 (Darwin) iEYEARECAAYFAk0dvZ4ACgkQ+meF/S97aXgYTACfZC70bsYn3d4/VRY2GfK5lF0k xOIAnRsBliv9EErA919vc5KoTAHhq3rC =IE3C -----END PGP SIGNATURE-----

3 13

[Dovecot] Dovecot 1.2.12 + Postfix + virtual domains: delivering to system users
by Ran Talbott 01 Jan '11

01 Jan '11

As mentioned in my previous posting, I've set up a mailserver for a domain of Winboxen, authenticated through Active Directory. After some struggles, I finally got that working. But I also need to receive emails for a few system users on the mailserver (like postmaster, and a couple of accounts set up for maintaining the system). I thought, based on the way I read the documentation, that I could just add a "userdb passwd", ahead of the "userdb ldap", and deliver would find their home directory maildirs. The virtual users would fail the passwd search, fall through to the LDAP check, and deliver would drop their mail into their maildirs in the /var/mailstore tree. I knew the system users wouldn't be able to login to the IMAP server, but this isn't a concern. Instead, the system users' mail got bounced, after an auth check via the "master" socket (from Postfix, I guess: it's a transient process) whose details don't get logged. And the virtual users' lookups (done by deliver) returned made-up UIDs and GIDs, and maildir locations (/home/<realm>/<username>) completely different from what the LDAP lookup normally returns (/var/mailstore/<username>). So what am I missing here? I managed to work around this by adding the system users to the Postfix virtual.db, but it would be nice to not need to do that. It would also be nice to neable the system users to check email by logging in to the IMAP serve, but I'm reluctant to even try that after the way delivery went completely wonky. Thanks, Ran

4 7

[Dovecot] Can doveadm rebuild thread indexes?
by David Warden 30 Dec '10

30 Dec '10

I'm already using "doveadm search" to update my squat fts indexes (dovecot.index.search and dovecot.index.search.uids) but I'd like to also update dovecot's thread index file (dovecot.index.thread) using doveadm. I checked the new wiki and the archives but didn't see any option for this. (I'm running 2.0.8) The alternative (AFAIK) is to write a script that signs in to IMAP and does "thread references UTF-8 ALL" in each folder. As an aside, could the dovecot LDA do any of this work? I'd surely be willing to spend the resources at delivery time to keep those indexes updated if it meant I didn't have to run a cron job to keep them updated. -David Warden

2 1

[Dovecot] LDAP binds
by Trever L. Adams 30 Dec '10

30 Dec '10

I am using 2.0.8. Anonymous binds are no longer supported in the environment I am using. I need to change my userdb ldap setup to bind. I believe the ldap server does Kerberos (or can) authentication. My users are authenticating using Kerberos or Kerberos/PAM. This needs to stay in place. Can anyone suggest how I might go about changing my setup to work? My current ldap setup is as follows (the directories, user id, etc are set statically in the configuration elsewhere): tls = yes hosts = MAILSERVER base = dc=middleearth,dc=sapphiresunday,dc=org ldap_version = 3 user_attrs = userPrincipalName=user user_filter = (&(objectClass=person)(|(mail=%u)(sAMAccountName=%u)(userPrincipalName=%u))) # For using doveadm -A: iterate_attrs = userPrincipalName=user iterate_filter = (objectClass=person) Thank you, Trever Adams -- "Seize the day, put no trust in the morrow!" -- Quintus Horatius Flaccus (Horace)

2 2

[Dovecot] doveadm search
by dovecot 30 Dec '10

30 Dec '10

I would like to have soem information added to this page: http://wiki2.dovecot.org/Tools/Doveadm/Fetch Under 'Arguments'/fields is mentioned that 'hdr' could be used. But i wanted doveadm to just return the header of my message I found out, by simply trying, that next statement works: $ doveadm -f table fetch -u <username> "date.sent mailbox hdr.Subject" subject seomthing date.sent mailbox hdr.subject 2010-12-30 11:56:38 (+0100) INBOX RE: Question about seomthing 2010-12-30 13:24:29 (+0100) INBOX RE: Question about seomthing 2010-12-30 11:12:33 (+0100) Sent Question about seomthing 2010-12-30 12:11:19 (+0100) Sent Re: Question about seomthing I think it would be nice to add information to the field 'hdr' to let people know that 'hdr.Subject' is also allowed. -- Luuk

1 0

[Dovecot] dovecot-keywords problem with MDN
by Mauro D. 30 Dec '10

30 Dec '10

Hi all, I have Dovecot 1.2.13 installed. My clients ask why Disposition-Notification is requested every time the mail is moved on a new IMAP folder... I take a look into dovecot-keywords file and I see that: 1) I have only one row 0 NonJunk 2) dovecot-keywords file is not present inside every directory. How I can restore normal status? Where is probably the problem? Thanks Mauro D.

2 3

[Dovecot] Error: User doesn't have home dir set, disabling duplicate database
by fila＠pruda.com 30 Dec '10

30 Dec '10

Hello, I have found this message in logs. But delivering is working. Error: User peter(a)mydomain.cz doesn't have home dir set, disabling duplicate database doveconf -n # 2.0.8: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-lts i686 ext3 auth_mechanisms = plain login disable_plaintext_auth = no mail_location = maildir:/home/vmail/%u managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { home = /home/vmail/%u sieve = /home/vmail/%u/dovecot.sieve sieve_global_path = /home/vmail/dovecot-global.sieve } postmaster_address = postmaster(a)mydomain.cz protocols = imap pop3 service auth { unix_listener auth-userdb { group = vmail mode = 0660 user = vmail } } ssl_cert = </etc/ssl/dovecot/cert.pem ssl_key = </etc/ssl/dovecot/key.pem userdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } protocol lda { mail_plugins = sieve } I have googled little bit. According to this article http://wiki2.dovecot.org/VirtualUsers/Home I think the problem is: mail_location = maildir:/home/vmail/%u and plugin { home = /home/vmail/%u } is the same directory. Is it right? Is the solution to set mail_location = maildir:/home/vmail/mail/%u ? -- Best regards Filip

2 2

[Dovecot] IMAP messages not being marked read
by void372＠transientvoid.com 30 Dec '10

30 Dec '10

I recently moved from Fedora 13 to Fedora 14 and consequently to dovecot 2.0.8. Since then, I have observed that messages are not being marked as read in all cases. The general behavior is: 1. Use my mail client to read all unseen messages. All mail folders show no messages unread. 2. Tell mail client to check for new mail. 3. Mail client now says that some folders have new mail (1 or more messages) 4. Clicking on a folder with new mail (say with 6 unread) shows that there are no unread messages. I have observed this behavior using both kmail and squirrelmail so do not believe it is a mail client problem. I have maildir folders to which mail is delivered using procmail recipes directly to the appropriate dovecot folder. In these folders, I notice that the "cur" directory has a matching number of messages that do not have an "S" flag on the end of the file name. For example: # ls .fedora-list/ cur/ dovecot.index.log new/ dovecot.index.cache dovecot-uidlist tmp/ # ls .fedora-list/cur 1293379204.26554_1.nehalem.home.rainbowdreams.com:2,S 1293379206.26571_1.nehalem.home.rainbowdreams.com:2, 1293379207.26581_1.nehalem.home.rainbowdreams.com:2, 1293380106.26744_1.nehalem.home.rainbowdreams.com:2, 1293380106.26748_1.nehalem.home.rainbowdreams.com:2,S 1293381904.26876_1.nehalem.home.rainbowdreams.com:2,S 1293383704.26978_1.nehalem.home.rainbowdreams.com:2,S 1293384604.27005_1.nehalem.home.rainbowdreams.com:2,S 1293385504.27067_1.nehalem.home.rainbowdreams.com:2,S 1293386404.27105_1.nehalem.home.rainbowdreams.com:2,S 1293387305.27158_1.nehalem.home.rainbowdreams.com:2, 1293387305.27166_1.nehalem.home.rainbowdreams.com:2, 1293388204.27193_1.nehalem.home.rainbowdreams.com:2, 1293389105.27234_1.nehalem.home.rainbowdreams.com:2,S 1293390005.27292_1.nehalem.home.rainbowdreams.com:2,S 1293390006.27298_1.nehalem.home.rainbowdreams.com:2,S 1293392706.27400_1.nehalem.home.rainbowdreams.com:2,S 1293392706.27406_1.nehalem.home.rainbowdreams.com:2,S 1293393611.27515_1.nehalem.home.rainbowdreams.com:2,S 1293396304.27673_1.nehalem.home.rainbowdreams.com:2,S 1293396305.27675_1.nehalem.home.rainbowdreams.com:2,S 1293398104.27743_1.nehalem.home.rainbowdreams.com:2,S 1293399003.27966_1.nehalem.home.rainbowdreams.com:2,S I have so far been unable to observe a pattern as to which messages get affected. I made the assumption that perhaps the issue is a conversion issue in my existing maildir folders, but this does not appear to be the case. When I moved the existing directory out of the way and started with a fresh empty directory the issue has come back after a day or two. Unfortunately, my install of Fedora 14 overlaid the partition with Fedora 13, so I cannot confirm the version of dovecot I was using with no issues. (so very glad I use separate disk and partition for the OS!) I can say that all configuration was in one dovecot.conf file, not the multiple conf.d files I see on Fedora 14. Any assistance on what to troubleshoot next is greatly appreciated! The info about my dovecot is shown below. The maildir's are on local LVM/RAID and not remote. Thanks!! # dovecot -n # 2.0.8: /etc/dovecot/dovecot.conf # OS: Linux 2.6.35.10-72.fc14.x86_64 x86_64 Fedora release 14 (Laughlin) ext3 disable_plaintext_auth = no mail_debug = yes mail_location = maildir:/vg02/mail/%u mbox_write_locks = fcntl passdb { driver = pam } plugin { mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename flag_change append mail_log_fields = uid box msgid size flags } ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { driver = passwd } # dovecot --version 2.0.8

2 2

[Dovecot] Dovecot consulting companies
by Timo Sirainen 30 Dec '10

30 Dec '10

Once in a while someone asks about companies who could help installing / running / etc. their mail server. I don't really know many, so I thought I'd add a wiki page about it. Feel free to add your company on the list if you offer some Dovecot related services. Write also a few words what type of services you offer. http://wiki2.dovecot.org/Consulting I'll add a link there once at least one company is listed. :) Oh and if it's not clear above, I don't mean that the list should contain companies that only offer email accounts (Dovecot or not).

1 0

[Dovecot] Reverting from 2.0. to 1.2
by Thomas Hummel 30 Dec '10

30 Dec '10

Hello Timo, I switched this morning from dovecot-1.2.12 to 2.0.8 with a basic setup (high performance login mode, Maildir, everyhing on NFS, one shared but unused namespace). No problem so far except that some Thunderbird users who wouldn't succeed in moving messages from some one folder to another. They'd get a message about some illegal character in the mailboxname (already existing mailbox of course). This is user input so I don't have any details nor sufficient element to consider it a real problem. A Thunderbird restart seems to solve the problem. My questions were : . is there a different handling in the hierarchy separator (internal or advertized for the namespace) ? (I use "/" for both namespaces and "." since in Maildir). . is there a different handling in the non-ASCII mailbox names ? Could it be related ? . if something goes really wrong, is it safe to revert to 1.2.12 ? Maybe some files has non-compatible format (dovecot-uidlist, indexes, ...) ? Thanks. -- Thomas Hummel | Institut Pasteur <hummel(a)pasteur.fr> | Pôle informatique - systèmes et réseau

3 14

[Dovecot] Fetch without setting flags
by Behrooz Afghahi 30 Dec '10

30 Dec '10

Hello, I'm customizing squirrelmail and I want to print a line from the message in front of the subject in mailbox listing (like gmail). the problem is, when I use 'FETCH {SOME_ID} BODY[]' the message gets marked as seen. How can I fetch without setting the senn flag ? Thanks Behrooz

3 2

[Dovecot] How incoming emails are routed to public shared mailboxes ?
by Frank Bonnet 30 Dec '10

30 Dec '10

Hello I'm setting up few public shared maiboxes ( maildir format ) but I'm wondering how are they routed into the right ? Does authorized users have to place them inside manually ? Could it be automated ? I'm stuck Thank for any infos

2 1

[Dovecot] over quota issue
by PA 30 Dec '10

30 Dec '10

I have a situation where if a user is over quota and sending through postfix I get an error, now this error only happens if the user is over quota, otherwise it works with no problem. However if sending using /usr/local/libexec/dovecot/dovecot-lda it works every time even if overquota, any ideas? I just can't seem to figure this one out. TIA, Paul Using mail command Dec 21 11:44:53 testip5 dovecot: lda(user2(a)virttest1.meganet.net): Panic: stream doesn't support seeking backwards Dec 21 11:44:53 testip5 dovecot: lda(user2(a)virttest1.meganet.net): Error: Raw backtrace: /usr/local/lib/dovecot/libdovecot.so.0 [0xe660c0] -> /usr/local/lib/dovecot/libdovecot.so.0(i_syslog_fatal_handler+0x34) [0xe66164] -> /usr/local/lib/dovecot/libdovecot.so.0 [0xe65704] -> /usr/local/lib/dovecot/libdovecot.so.0 [0xe6f600] -> /usr/local/lib/dovecot/libdovecot.so.0(i_stream_seek+0x68) [0xe6cb68] -> /usr/local/lib/dovecot/libdovecot.so.0 [0xe6fda8] -> /usr/local/lib/dovecot/libdovecot.so.0(i_stream_read+0x7a) [0xe6cc3a] -> /usr/local/lib/dovecot/libdovecot.so.0(i_stream_read_data+0x2b) [0xe6ceab] -> /usr/local/lib/dovecot/libdovecot.so.0(message_parse_header_next+0x87) [0xe504a7] -> /usr/local/lib/dovecot/libdovecot.so.0 [0xe51d5e] -> /usr/local/lib/dovecot/libdovecot.so.0(message_parser_parse_next_block+0x43) [0xe51543] -> /usr/local/lib/dovecot/libdovecot.so.0(message_parser_parse_header+0x2f) [0xe5175f] -> /usr/local/lib/dovecot/libdovecot-storage.so.0(index_mail_parse_headers+0x10 1) [0x14bb51] -> /usr/local Dec 21 11:44:53 testip5 postfix/pipe[20848]: D1F46958166: to=<user2(a)virttest1.meganet.net>, relay=dovecot, delay=0.03, delays=0.01/0/0/0.02, dsn=4.3.0, status=deferred (Command died with signal 6: "/usr/local/libexec/dovecot/dovecot-lda") Or Dec 21 11:44:35 testip5 dovecot: dict: mysql: Connected to localhost (dovecotquota) Dec 21 11:44:35 testip5 dovecot: lda(user2(a)virttest1.meganet.net): Panic: stream doesn't support seeking backwards Dec 21 11:44:35 testip5 dovecot: lda(user2(a)virttest1.meganet.net): Error: Raw backtrace: /usr/local/lib/dovecot/libdovecot.so.0 [0xc230c0] -> /usr/local/lib/dovecot/libdovecot.so.0(i_syslog_fatal_handler+0x34) [0xc23164] -> /usr/local/lib/dovecot/libdovecot.so.0 [0xc22704] -> /usr/local/lib/dovecot/libdovecot.so.0 [0xc2c600] -> /usr/local/lib/dovecot/libdovecot.so.0(i_stream_seek+0x68) [0xc29b68] -> /usr/local/lib/dovecot/libdovecot.so.0 [0xc2cda8] -> /usr/local/lib/dovecot/libdovecot.so.0(i_stream_read+0x7a) [0xc29c3a] -> /usr/local/lib/dovecot/libdovecot.so.0(i_stream_read_data+0x2b) [0xc29eab] -> /usr/local/lib/dovecot/libdovecot.so.0(message_parse_header_next+0x87) [0xc0d4a7] -> /usr/local/lib/dovecot/libdovecot.so.0 [0xc0ed5e] -> /usr/local/lib/dovecot/libdovecot.so.0(message_parser_parse_next_block+0x43) [0xc0e543] -> /usr/local/lib/dovecot/libdovecot.so.0(message_parser_parse_header+0x2f) [0xc0e75f] -> /usr/local/lib/dovecot/libdovecot-storage.so.0(index_mail_parse_headers+0x10 1) [0x1afb51] -> /usr/local Dec 21 11:44:35 testip5 postfix/pipe[20848]: A2739958163: to=<user2(a)virttest1.meganet.net>, relay=dovecot, delay=0.07, delays=0.03/0.01/0/0.03, dsn=4.3.0, status=deferred (Command died with signal 6: "/usr/local/libexec/dovecot/dovecot-lda") Using dovecot-lda to send Dec 21 11:48:23 testip5 dovecot: dict: mysql: Connected to localhost (dovecotquota) Dec 21 11:48:23 testip5 dovecot: lda(user2(a)virttest1.meganet.net): msgid=unspecified: save failed to INBOX: Quota exceed, please email support for further assistance. Dec 21 11:48:23 testip5 dovecot: lda(user2(a)virttest1.meganet.net): msgid=unspecified: rejected: Quota exceed, please email support for further assistance. Postfix master: # Dovecot LDA dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/local/libexec/dovecot/dovecot-lda -f ${sender} -a ${recipient} -d ${user}@${nexthop} dovecot --version 2.0.8

2 2

[Dovecot] Dovecot 1.2.12+Postfix+Active Directory: virtual domain name dropped.
by Ran Talbott 30 Dec '10

30 Dec '10

I have a Windoze-only client who wants to move their mail hosting from godaddy.com hosting to an in-house system. I'm pitching Linux as an alternative to Exchange, and trying to set up a demonstration system for them. While a long-time Linux user, my server admin experience has been in setting up front-ends (mostly Apache-based web interfaces) for the embedded systems I specialize in. The goal is to have an IMAP server where the users don't have Linux IDs, and only need to manually login to the Active Directory domain controller. The client has multiple Internet domains, but all users are in the same Active Directory realm internally. With the help of the how-tos at linuxmail.info, I got the system to the point of being able to authenticate logins for both IMAP and SMTP (usng dovecot-SASL). I tried using PAM first, but it didn't work: running kinit from the command line takes over 90 seconds to get a ticket, and Dovecot timed out after 60 on every login attempt. So I switched to LDAP. Note: I still don't understand why, but authentication through Active Directory didn't work until I changed the querying distinguished name from the "cn=,dc=,dc=" format to "user(a)xxxx.local" format. I have Postfix using dovecot-deliver as the LDA, but I hit a snag: deliver is not putting the domain name in the path to the maildir. I have the active directory query set as: user_filter = (&(objectClass=user)(samaccountname=%n)) user_attrs = =home=/var/mailstore/%d/%n. =uid=501, =gid=501, \ =mail=maildir:/var/mailstore/%d/%n/Maildir/ When I send mail to testing.testing(a)xxxx.xxx (real domain obscured), I see this in mail.log Dec 23 10:49:24 IBMUBUNTU1 dovecot: auth(default): master in: USER#0111#011testing.testing(a)xxxx.xxx#011service=deliver Dec 23 10:49:24 IBMUBUNTU1 dovecot: auth(default): ldap(testing.testing): user search: base=dc=lawley, dc=local scope=subtree filter=(&(objectClass=user) (samaccountname=testing.testing)) fields= Dec 23 10:49:24 IBMUBUNTU1 dovecot: auth(default): ldap(testing.testing): result: objectClass(?unknown?)= cn(?unknown?)= sn(?unknown?)= givenName(?unknown?)= distinguishedName(?unknown?)= instanceType(?unknown?)= whenCreated(?unknown?)= whenChanged(?unknown?)= displayName(?unknown?)= uSNCreated(?unknown?)= uSNChanged(?unknown?)= name(?unknown?)= objectGUID(?unknown?)= userAccountControl(?unknown?)= primaryGroupID(?unknown?)= objectSid(?unknown?)= sAMAccountName(?unknown?)= sAMAccountType(?unknown?)= userPrincipalName(?unknown?)= objectCategory(?unknown?)= Dec 23 10:49:24 IBMUBUNTU1 dovecot: auth(default): master out: USER#0111#011testing.testing#011home=/var/mailstore//testing.testing. =uid=501#011gid=501#011mail=maildir:/var/mailstore//testing.testing/Maildir/ i.e., the domain does not appear in the paths to the home directory or maildir. I found a bug report in the mailing list that looks like it might be the same problem (%d not supported in user_attrs), but the fix it references is for 2.0. Is this a known problem in 1.x? Is there a fix/workaround for it? E.g., could I have Postfix generate the maidir path and pass it to deliver as the "-m" parameter? Thanks, Ran

2 1

[Dovecot] 'Doveadm user' could use better error codes
by Thomas Leuxner 30 Dec '10

30 Dec '10

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 - -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 The error codes for' doveadm user' should be improved to avoid error handling workarounds when scripting commands: $ doveadm user doveadm user [-a <userdb socket path>] [-x <auth info>] <user mask> […] $ echo $? 1 $ doveadm user foo userdb lookup: user foo doesn't exist $ echo $? 0 Please compare to ID output: $ id foo id: foo: No such user $ echo $? 1 Regards Thomas - -----BEGIN PGP SIGNATURE----- Version: GnuPG/MacGPG2 v2.0.16 (Darwin) iEYEARECAAYFAk0Z6FkACgkQ+meF/S97aXgxnQCfWk1ECdMoCewbr1O6lAkdksoH 324AoLCTg0dFmFhumEkM936irpcG7YF5 =wuwz - -----END PGP SIGNATURE----- -----BEGIN PGP SIGNATURE----- Version: GnuPG/MacGPG2 v2.0.16 (Darwin) iEYEARECAAYFAk0Z6HQACgkQ+meF/S97aXgGdACfawa02hZxk71CjIsj64sW0xXv CW8AoJRQZLFi4QwbvcDg6rzqzUv/3mE8 =Rt1O -----END PGP SIGNATURE-----

4 9

[Dovecot] doveadm quota get -u segmentation fault
by subscriber＠viliar.net.ru 30 Dec '10

30 Dec '10

Hello! I'm trying move to dovecot2 (centos 5.5, dovecot 2.0.8, dovecot compiled/packaged via edited dovecot2.spec from fedora git). Almost all fine, I can login via imap/pop3 and work with mail. I get segfault error with "doveadm quota get -u user" Here backtrace and other info: # gdb `which doveadm` core.5202 GNU gdb (GDB) Red Hat Enterprise Linux (7.0.1-23.el5_5.2) Copyright (C) 2009 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "i386-redhat-linux-gnu". For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>... Reading symbols from /usr/bin/doveadm...Reading symbols from /usr/lib/debug/usr/bin/doveadm.debug...done. done. Reading symbols from /usr/lib/dovecot/libdovecot-storage.so.0...Reading symbols from /usr/lib/debug/usr/lib/dovecot/libdovecot-storage.so.0.0.0.debug...done. done. Loaded symbols for /usr/lib/dovecot/libdovecot-storage.so.0 Reading symbols from /lib/libcrypt.so.1...(no debugging symbols found)...done. Loaded symbols for /lib/libcrypt.so.1 Reading symbols from /lib/libpam.so.0...(no debugging symbols found)...done. Loaded symbols for /lib/libpam.so.0 Reading symbols from /usr/lib/dovecot/libdovecot.so.0...Reading symbols from /usr/lib/debug/usr/lib/dovecot/libdovecot.so.0.0.0.debug...done. done. Loaded symbols for /usr/lib/dovecot/libdovecot.so.0 Reading symbols from /lib/libdl.so.2...(no debugging symbols found)...done. Loaded symbols for /lib/libdl.so.2 Reading symbols from /lib/librt.so.1...(no debugging symbols found)...done. Loaded symbols for /lib/librt.so.1 Reading symbols from /lib/libc.so.6...(no debugging symbols found)...done. Loaded symbols for /lib/libc.so.6 Reading symbols from /lib/libaudit.so.0...(no debugging symbols found)...done. Loaded symbols for /lib/libaudit.so.0 Reading symbols from /lib/ld-linux.so.2...(no debugging symbols found)...done. Loaded symbols for /lib/ld-linux.so.2 Reading symbols from /lib/libpthread.so.0...(no debugging symbols found)...done. Loaded symbols for /lib/libpthread.so.0 Reading symbols from /usr/lib/dovecot/lib10_quota_plugin.so...Reading symbols from /usr/lib/debug/usr/lib/dovecot/lib10_quota_plugin.so.debug...done. done. Loaded symbols for /usr/lib/dovecot/lib10_quota_plugin.so Reading symbols from /usr/lib/dovecot/doveadm/lib10_doveadm_quota_plugin.so...Reading symbols from /usr/lib/debug/usr/lib/dovecot/doveadm/lib10_doveadm_quota_plugin.so.debug...done. done. Loaded symbols for /usr/lib/dovecot/doveadm/lib10_doveadm_quota_plugin.so Core was generated by `doveadm quota get -u xxx@xxx'. Program terminated with signal 11, Segmentation fault. #0 0x00cc2b95 in cmd_quota_get_run (ctx=0x94dd3a8, user=0x94ee098) at doveadm-quota.c:52 52 array_foreach(&quser->quota->roots, root) (gdb) bt full #0 0x00cc2b95 in cmd_quota_get_run (ctx=0x94dd3a8, user=0x94ee098) at doveadm-quota.c:52 root__foreach_end = 0x94cd548 root = 0x94dec90 #1 0x0804f079 in doveadm_mail_next_user (ctx=0x94dd3a8, input=<value optimized out>, error_r=0xbffdf4e8) at doveadm-mail.c:220 service_user = 0x94debe0 error = <value optimized out> ret = 1 #2 0x0804f18c in doveadm_mail_single_user (ctx=0x94dd3a8, argv=0x94d51d4, username=0x94d51ed "xxx@xxx", service_flags=130) at doveadm-mail.c:246 input = {module = 0x0, service = 0x0, username = 0x94d51ed "xxx@xxx", local_ip = {family = 0, u = {ip6 = {in6_u = {u6_addr8 = '\000' <repeats 15 times>, u6_addr16 = {0, 0, 0, 0, 0, 0, 0, 0}, u6_addr32 = {0, 0, 0, 0}}}, ip4 = {s_addr = 0}}}, remote_ip = {family = 0, u = {ip6 = {in6_u = { u6_addr8 = '\000' <repeats 15 times>, u6_addr16 = {0, 0, 0, 0, 0, 0, 0, 0}, u6_addr32 = {0, 0, 0, 0}}}, ip4 = {s_addr = 0}}}, userdb_fields = 0x0, no_userdb_lookup = 0} error = <value optimized out> ret = <value optimized out> #3 0x0804f379 in doveadm_mail_cmd (cmd=0x94dc0d0, argc=3, argv=0x94d51d4) at doveadm-mail.c:418 service_flags = <value optimized out> ctx = 0x94dd3a8 getopt_args = 0x94cd2d0 "As:u:" username = 0x94d51ed "xxx@xxx" wildcard_user = 0x0 c = <value optimized out> #4 0x0804f6f8 in doveadm_mail_try_run_multi_word (cmd=0x94dc0d0, cmdname=0xcc2f18 "get", argc=4, argv=0x94d51c4) at doveadm-mail.c:453 No locals. #5 0x0804f7b7 in doveadm_mail_try_run (cmd_name=0x94d51e0 "quota", argc=4, argv=0x94d51c4) at doveadm-mail.c:476 cmd__foreach_end = 0x94dc0e8 cmd = 0x94dc0d0 cmd_name_len = 5 __FUNCTION__ = "doveadm_mail_try_run" #6 0x08053e11 in main (argc=Cannot access memory at address 0x14 ) at doveadm.c:344 cmd_name = 0x94d51e0 "quota" i = 134626935 quick_init = false c = <value optimized out> # 2.0.8: /etc/dovecot/dovecot.conf # OS: Linux 2.6.18-194.17.1.el5.028stab073.1 i686 CentOS release 5.5 (Final) simfs auth_mechanisms = plain login digest-md5 cram-md5 apop auth_socket_path = /var/run/dovecot/auth-userdb first_valid_gid = 5000 listen = * mail_location = maildir:/mail/%d/%n/maildir:INDEX=/mail/%d/%n/indexes mail_plugins = quota managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { autocreate2 = virus autocreate3 = spam sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } protocols = imap pop3 lmtp sieve sieve service auth-worker { user = root } service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } } service imap-login { inet_listener imap { port = 143 } inet_listener imaps { port = 993 ssl = yes } } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0660 user = postfix } } service managesieve-login { inet_listener sieve { port = 4190 } inet_listener sieve_deprecated { port = 2000 } } service pop3-login { inet_listener pop3 { port = 110 } inet_listener pop3s { port = 995 ssl = yes } } ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { driver = prefetch } userdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } verbose_proctitle = yes protocol lmtp { mail_plugins = quota sieve } protocol lda { mail_plugins = quota sieve } protocol imap { mail_max_userip_connections = 10 mail_plugins = quota imap_quota autocreate } protocol sieve { mail_max_userip_connections = 3 } protocol pop3 { mail_max_userip_connections = 3 mail_plugins = quota } # grep -v '^ *$#.*$\?$' /etc/dovecot/dovecot-sql.conf.ext driver=sqlite connect = /etc/mailserver/mail.db default_pass_scheme = PLAIN user_query = SELECT '/mail/' || domain || '/' || mail || '/maildir' as home, uid, gid, '*:storage=' || quota || 'B' AS quota_rule FROM users WHERE mail || '@' || domain = '%u' password_query = SELECT mail || '@' || domain as user, password as password, '/mail/' || domain || '/' || mail || '/maildir' as userdb_home, uid as userdb_uid, gid as userdb_gid, 'maildir:storage=' || (quota/1024) as userdb_quota, nice as userdb_nice, hosts as allow_nets FROM users WHERE mail = '%n' and domain = '%d' and access = 'Y' and %Ls = 'Y';

2 1

[Dovecot] Is this really a user agent issue?
by Phil Howard 30 Dec '10

30 Dec '10

I suspect this is a user agent issue, given that Evolution is flaky in so many areas. When I deliver mail to a subfolder/subbox (e.g. the -m option in the deliver command), and Evolution doesn't know of it, yet, creating it fails, and Evolution still can't get to it. Doing things the other way around (create it in Evolution first, then deliver to it) works fine. Seems to be silliness to me. Just wondered if any Dovecot aspects might be involved ... such as the fact that the case is different (e.g. "INBOX" in the filesystem, but "Inbox" in Evolution). -- sHiFt HaPpEnS!

6 12

[Dovecot] How to get a working dovecot.conf?
by oddball56 29 Dec '10

29 Dec '10

Hi, I installed openSUSE 11.3 server version, and followed the guidelines from: http://www.howtoforge.com/perfect-server-opensuse-11.3-x86_64-ispconfig-3 Everything works, accept loggin into dovecot. For many days i tried to get logged into dovecot, from localhost, from other pc in the lan, from squirrelmail, not possible. I read manuals on http://wiki.dovecot.org/ and tried to set the passwd db like: auth default { .. passdb passwd-file { args = /etc/passwd.dovecot } .. The "args" were not accepted according to the output from dovecot -n As now i installed dovecot 20, with a fresh dovecot.conf. Ofcourse this was not working, so i 'updated' ISPConfig. Now my dovecot.conf is a mess, and i get errormessages like: Dec 20 21:00:02 AsusTT-sfn6 postfix/smtpd[7073]: fatal: no SASL authentication mechanisms And from dovecot: dovecot.pem missing from /etc/ssl/certs, so no ssl login possible also Now i am checking dovecot -n line by line and this message pops out: mail_plugin_dir: access(/usr/lib/dovecot/modules/imap) failed: No such file or directory passdb { driver = pam } passdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } furtheron: ssl = no userdb { driver = passwd } userdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } it has 64 lines. first and last_valid_uid and gid are set to 5000. In this conf i did not change anything. I would realy appreciate some help, as my only goal was to set up an imap server so i can access my mail from all over the world, and have all mail in 'one' central place, instead of scattered all over many pc's and laptops. The irony is that evrything but this works ;-p tia, for an answer. Rob. -- View this message in context: http://old.nabble.com/How-to-get-a-working-dovecot.conf--tp30506797p3050679… Sent from the Dovecot mailing list archive at Nabble.com.

6 11

[Dovecot] panic with lmtp proxy (assertion failed)
by imaami＠netikka.fi 29 Dec '10

29 Dec '10

Hello! Got a panic&assertion failed with LMTP proxy. Target Dovecot LMTP server hanged and Dovecot LMTP proxy server started logging panics/assertions. Core dumps were disabled unfortunately, so I don't know if this is helpful at all: Dec 29 15:41:58 lmtp(8853): Panic: file lmtp-proxy.c: line 370 (lmtp_proxy_output_timeout): assertion failed: (proxy->data_input->eof) Dec 29 15:41:58 lmtp(8853): Error: Raw backtrace: /usr/local/dovecot20/lib/dovecot/libdovecot.so.0 [0xb76aa7c1] -> /usr/local/dovecot20/lib/dovecot/libdovecot.so.0 [0xb76aa83f] -> /usr/local/dovecot20/lib/dovecot/libdovecot.so.0(i_error+0) [0xb76aab14] -> dovecot/lmtp [0x804e3f4] -> /usr/local/dovecot20/lib/dovecot/libdovecot.so.0(io_loop_handle_timeouts+0xe0) [0xb76b7720] -> /usr/local/dovecot20/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0x8b) [0xb76b843b] -> /usr/local/dovecot20/lib/dovecot/libdovecot.so.0(io_loop_run+0x40) [0xb76b7340] -> /usr/local/dovecot20/lib/dovecot/libdovecot.so.0(master_service_run+0x2a) [0xb76a31fa] -> dovecot/lmtp(main+0x170) [0x804b380] -> /lib/i686/cmov/libc.so.6(__libc_start_main+0xe5) [0xb7516455] -> dovecot/lmtp [0x804b171] Dec 29 15:41:58 master: Error: service(lmtp): child 8853 killed with signal 6 (core dumps disabled) doveconf -n output: $ /usr/local/dovecot20/bin/doveconf -c /usr/local/dovecot20/etc/dovecot/dovecot-lmtpproxy.conf -n # 2.0.8: /usr/local/dovecot20/etc/dovecot/dovecot-lmtpproxy.conf # OS: Linux 2.6.31.5 i686 Debian 5.0.7 auth_cache_negative_ttl = 0 auth_mechanisms = plain login auth_socket_path = /usr/local/dovecot20/var/run/dovecot-lmtpproxy/auth-userdb auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@&: auth_verbose = yes base_dir = /usr/local/dovecot20/var/run/dovecot-lmtpproxy/ disable_plaintext_auth = no listen = * lmtp_proxy = yes log_path = /var/log/dovecot.lmtpproxy/dovecot.lmtpproxy.log login_log_format_elements = user=<%u> service=%s method=%m rip=%r lip=%l %c login_trusted_networks = 172.16.83.64/26 mail_fsync = never mail_gid = 1000 mail_location = maildir:~/Maildir mail_uid = 1000 maildir_very_dirty_syncs = yes passdb { args = /usr/local/dovecot20/etc/dovecot/dovecot-sql.lmtpproxy.alias.conf driver = sql } postmaster_address = postmaster(a)example.com protocols = lmtp service auth-worker { user = $default_internal_user } service auth { client_limit = 8192 unix_listener auth-userdb { mode = 0666 } } service imap-login { process_min_avail = 1 service_count = 0 vsz_limit = 1 G } service imap { process_limit = 2048 } service lmtp { inet_listener lmtp { address = * port = 24 } process_min_avail = 1 service_count = 0 user = mailuser vsz_limit = 512 M } service pop3-login { process_min_avail = 1 service_count = 0 vsz_limit = 1 G } service pop3 { process_limit = 2048 } ssl = no verbose_proctitle = yes protocol lda { info_log_path = log_path = mail_fsync = optimized } protocol imap { imap_client_workarounds = delay-newmail mail_max_userip_connections = 20 } protocol lmtp { mail_fsync = optimized } protocol pop3 { mail_max_userip_connections = 5 pop3_client_workarounds = outlook-no-nuls oe-ns-eoh }

1 0

[Dovecot] search pattern -- which format?
by Ralf Hildebrandt 28 Dec '10

28 Dec '10

I had a look at the docs, but I could really see which kind of patterns the "search patterns" for doveadm must be. Regexp? PCRE? -- Ralf Hildebrandt Geschäftsbereich IT | Abteilung Netzwerk Charité - Universitätsmedizin Berlin Campus Benjamin Franklin Hindenburgdamm 30 | D-12203 Berlin Tel. +49 30 450 570 155 | Fax: +49 30 450 570 962 ralf.hildebrandt(a)charite.de | http://www.charite.de

2 1

[Dovecot] Can dovecot+solr search on attachments?
by Antonio Perez-Aranda 28 Dec '10

28 Dec '10

I remember to read that dovecot+solr support search on mail attachment Is this true? Maybe, is needed to improve the basic solr schema to do this? -- Antonio Pérez-Aranda Alcaide aperezaranda(a)yaco.es Yaco Sistemas S.L. http://www.yaco.es/ C/ Rioja 5, 41001 Sevilla Teléfono +34 954 50 00 57 Fax +34 954 50 09 29

2 4

[Dovecot] Iphone all imap folders are visibles !
by Frank Bonnet 28 Dec '10

28 Dec '10

Hello When I use my iphone to read my emails through IMAP I can see ALL folders that are in my email home directory not only those are listed in the .subscriptions file ... This should be a real security problem Anyone have the same problem ? Thanks

2 1

[Dovecot] director in large(ish) environments
by Cor Bosman 28 Dec '10

28 Dec '10

Hey all, just wondering who here is running the director service in a larger environment. I just switched our whole production setup to the director and am quite pleased with the result. We're doing a peak of about 25000 tot 30000 concurrent sessions on 3 servers. But ive shut 1 server down a couple of days ago to see what would happen and 2 servers carried the load easily. (16 CPU, 24GB memory servers). If others are using the director on larger setups maybe we can all post when things do or dont work well. Now to see if the solution is better than the problem :) Cor

2 2

[Dovecot] Migrate from Maildir to mdbox
by Odhiambo Washington 28 Dec '10

28 Dec '10

Looking at http://wiki2.dovecot.org/Migration/MailFormat, I do not see much on how to do a migration from Maildir to mdbox. That page isn't quite updated it looks. I have several domains (virtual) with the following storage layout: /var/spool/virtual/$domain. So the users have their mail stored as follows: /var/spool/virtual/domain1/$user/Maildir /var/spool/virtual/domain2/$user/Maildir /var/spool/virtual/domain3/$user/Maildir /var/spool/virtual/domainN/$user/Maildir >From the wiki, I am told the steps to take are: 1. Set mail_location=mdbox:~/mdbox 2. Run "doveadm mirror -u username maildir:~/Maildir" The instruction above confuses me because in my situation, I don't have a "username" per se. dovecot-deliver knows how to figure out my usernames and their mail_location settings. How do I derive my "username" when users are virtual, stored in MySQL back end? Again, the right command seems to rely on dsync, not "doveadm mirror". I could manually get all the values for the users for each domain and run: dysnc -u $u -o "mail_location=maildir:/var/spool/virtual/domain1/$u/Maildir" mirror "mdbox:/var/spool/virtual/domain1/$u/mdbox" This is so manual, especially because I have to (if I remember well) create /var/spool/virtual/domain1/$u/mdbox (and have the permissions right) before running dysnc. Is there an easier way out, perhaps?? -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254733744121/+254722743223 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Damn!!

5 11

[Dovecot] Postfix - deliver problem.
by Mark Bronstein 28 Dec '10

28 Dec '10

I really could use some help. I have been using dovecot and qmail on Debian for years with no problems. I just replaced qmail with Postfix and have not been able to get messages to dovecot via deliver. I have tried to set it up as a virtual mailbox only "no lookup necessary" system following the vaious help pages. I am using just a single user vmail:mail to execute postfix and deliver. My Dovecot.conf is: ----------------------- # 1.2.16: /etc/dovecot/dovecot.conf # OS: Linux 2.6.18-194.17.1.el5.028stab070.7 i686 Debian 5.0.7 simfs log_path: /var/log/dovecot/dovecot.log info_log_path: /var/log/dovecot/dovecot_info.log log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap pop3 imaps pop3s disable_plaintext_auth: no verbose_ssl: yes login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login first_valid_uid: 112 last_valid_uid: 112 first_valid_gid: 8 last_valid_gid: 8 mail_location: maildir:/var/mail/domains/%d/%n/Maildir mail_debug: yes mail_full_filesystem_access: yes mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 lda: postmaster_address: mark(a)bronsteinlaw.com mail_plugins: sieve log_path: /var/log/dovecot/dovecot-local-deliver.log auth_socket_path: var/run/dovecot/auth-master auth default: user: vmail verbose: yes debug: yes debug_passwords: yes passdb: driver: passwd-file args: /etc/dovecot/passwd userdb: driver: static args: uid=vmail gid=mail home=/var/mail/domains/%d/%n allow_all_users=yes socket: type: connect master: path: /var/run/dovecot/auth-master mode: 384 user: vmail group: mail plugin: sieve_global_dir: /etc/dovecot/sieve/global/ -------------------------------- I have the dovecot deliver line in postfix's master.cf according to the docs: --------------- dovecot unix - n n - - pipe flags=DRhu user=vmail argv=/usr/lib/dovecot/deliver -f ${sender} -d ${recipient} ------------------ Incoming emails are being saved to the Postfix queue but then delivery is unsuccessful with an error message of: 2010-12-26 23:11:09 deliver(mark(a)bronsteinlaw.com): Error: userdb lookup: connect(var/run/dovecot/auth-master) failed: No such file or directory Any help would be appreciated. Thanks, Mark B

6 6