- dovecot - dovecot.org

Error: /proc/self/status is larger than expected
by Elisamuel Resto Donate 06 Apr '23

06 Apr '23

Hello, Writing to get some insight as to how I might rid myself of a the pesky error message on the subject. Every binary throws out that error, every LMTP delivery... basically every time any dovecot binary is executed. I am unsure if this is configuration related or not, but intuition says it is an issue with a kernel feature or compiler issue. I saw the error message in the source code (file ), but I don't understand enough of the dovecot architecture or what the code itself is doing in this case. Below and excerpt of a few lines of logs. Since I don't know what specifically this would relate to (and I don't quite remember the command to send the "safe" version of the configuration), I am sending this message in hopes that whatever is needed can be asked and I will provide it. Regards, -Sam [... postfix and rspamd output...] Mar 20 22:17:02 gaia postfix/qmgr[21403]: 4PgcGQ33LfzdT4h: from=<list(a)someml.tld>, size=12064, nrcpt=1 (queue active) Mar 20 22:17:02 gaia postfix/smtpd[18941]: disconnect from some.list.server[1.2.3.4] ehlo=2 starttls=1 mail=1 rcpt=1 data=1 quit=1 commands=7 Mar 20 22:17:02 gaia dovecot: lmtp(18954): Error: /proc/self/status is larger than expected Mar 20 22:17:02 gaia dovecot: lmtp(18954): Connect from local Mar 20 22:17:02 gaia dovecot: lmtp(sam(a)samresto.dev)<18954><vbRKLa4hGWQKSgAAw1YR2w>: Error: /proc/self/status is larger than expected Mar 20 22:17:02 gaia dovecot: message repeated 2 times: [ lmtp(sam(a)samresto.dev)<18954><vbRKLa4hGWQKSgAAw1YR2w>: Error: /proc/self/status is larger than expected] Mar 20 22:17:02 gaia dovecot: lmtp(sam(a)samresto.dev)<18954><vbRKLa4hGWQKSgAAw1YR2w>: sieve: msgid=<84cf4a75-db54-f33c-cea2-f4772cd182d8(a)samresto.dev>: fileinto action: stored mail into mailbox 'Lists/Folder' Mar 20 22:17:02 gaia dovecot: lmtp(sam(a)samresto.dev)<18954><vbRKLa4hGWQKSgAAw1YR2w>: Error: /proc/self/status is larger than expected Mar 20 22:17:02 gaia dovecot: indexer-worker(sam(a)samresto.dev)<18956><vbRKLa4hGWQKSgAAw1YR2w:RtkiMa4hGWQMSgAAw1YR2w>: Error: /proc/self/status is larger than expected Mar 20 22:17:02 gaia postfix/lmtp[18943]: 4PgcGQ33LfzdT4h: to=<sam(a)samresto.dev>, relay=wyvern.samresto.dev[private/dovecot-lmtp], delay=0.4, delays=0.31/0/0.01/0.07, dsn=2.0.0, status=sent (250 2.0.0 <sam(a)samresto.dev> vbRKLa4hGWQKSgAAw1YR2w Saved) Mar 20 22:17:02 gaia dovecot: lmtp(18954): Disconnect from local: Logged out (state=READY) Mar 20 22:17:02 gaia dovecot: lmtp(18954): Error: /proc/self/status is larger than expected Mar 20 22:17:02 gaia postfix/qmgr[21403]: 4PgcGQ33LfzdT4h: removed

6 11

Email not working
by Michael Hooker 05 Apr '23

05 Apr '23

Hi, First of all may I say I am not an expert on Dovecot so please forgive me if the answer to my query is obvious. After upgrading from Ubuntu 20.04 to 22.04 my email is not working. root@mail:~# doveconf -n # 2.3.16 (7e2e900c1a): /etc/dovecot/dovecot.conf # Pigeonhole version 0.5.16 (09c29328) # OS: Linux 5.15.0-60-generic x86_64 Ubuntu 22.04.1 LTS # Hostname: mail.odysseytours.nz auth_debug = yes auth_mechanisms = plain login auth_username_format = %{if;%d;eq;mail.odysseytours.nz;%Ln;%Lu} listen = *, :: mail_debug = yes mail_location = mbox:~/mail:INBOX=/var/mail/%u mail_privileged_group = mail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate mime foreverypart extracttext namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { driver = pam } plugin { sieve = file:~/sieve;active=~/.dovecot.sieve } protocols = " imap lmtp sieve pop3" service stats { unix_listener stats-reader { group = vmail mode = 0660 user = vmail } unix_listener stats-writer { group = vmail mode = 0660 user = vmail } } ssl_cert = </etc/dovecot/private/dovecot.pem ssl_cipher_list = EECDH+CHACHA20:EECDH+AESGCM:EDH+AESGCM:AES256+EECDH ssl_client_ca_dir = /etc/ssl/certs ssl_dh = # hidden, use -P to show it ssl_key = # hidden, use -P to show it userdb { args = blocking=no driver = passwd } root@mail:~# doveadm user -f 'username' '*' nobody mike systemd-coredump sogo vmail mlmmj iredadmin iredapd snapd-range-524288-root snap_daemon Error: auth-master: userdb list: User listing returned failure Fatal: user listing failed root@mail:~# doveadm index -A -q \* doveadm(nobody): Error: mkdir(/nonexistent/mail/.imap) failed: Permission denied (euid=65534(nobody) egid=65534(nogroup)) doveadm(systemd-coredump): Error: mkdir(//mail/.imap) failed: Permission denied (euid=999(systemd-coredump) egid=999(systemd-coredump) missing +w perm: /, dir owned by 0:0 mode=0755) doveadm(snapd-range-524288-root): Error: mkdir(/nonexistent/mail/.imap) failed: Permission denied (euid=524288(snapd-range-524288-root) egid=524288(snapd-range-524288-root)) doveadm(snap_daemon): Error: mkdir(/nonexistent/mail/.imap) failed: Permission denied (euid=584788(snap_daemon) egid=584788(snap_daemon)) doveadm(3015804): Error: auth-master: userdb list: User listing returned failure doveadm: Error: Failed to iterate through some use Contents of /etc/dovecot/conf.d/10-auth.conf with all comments removed: auth_username_format=%{if;%d;eq;mail.odysseytours.nz;%Ln;%Lu} #https://serverfault.com/questions/260488/dovecot-user-lookup-fails-when-using-usernamedomain-format auth_mechanisms = plain login !include auth-system.conf.ext Contents of /etc/dovecot/conf.d/auth-system.conf.ext with all comments removed: passdb { driver = pam } userdb { driver = passwd ##https://doc.dovecot.org/configuration_manual/authentication/passwd/#authentication-passwd args = blocking=no } It says "Authentication failure (Password mismatch?)" but its definitely the correct password. root@mail:/home/mike# doveadm log errors Feb 22 02:43:48 Error: auth: passwd(postmaster(a)odysseytours.nz): getpwnam() failed: Address Don't know what this error means. root@mail:/home/mike# doveadm log errors Feb 22 02:43:48 Error: auth: passwd(postmaster(a)odysseytours.nz): getpwnam() failed: Address family not supported by protocol Don't know what this error means. Any help would be greatly appreciated.

2 1

Wildcard delivery from Postfix to Dovecot LDA issues
by EML 01 Apr '23

01 Apr '23

[apologies for postfix/dovecot cross-post] How, exactly, do postfix and dovecot communicate when postfix attempts to determine whether to deliver a message to the dovecot LDA, or to bounce it? In other words, how does postfix decide to bounce foo, and deliver bar, in these log messages: postfix/pipe[11857]: 933BCA071A: to=<foo(a)example.com>, relay=dovecot, ... status=bounced (user unknown) postfix/pipe[12266]: 8AD51A071A: to=<bar(a)example.com>, relay=dovecot, ... status=sent (delivered via dovecot service) The reason I ask is that the obvious answer with the main.cf setup doesn't appear to be sufficient, and dovecot appears to check whether or not the recipient exists in the userdb passwd file before allowing delivery. I have postfix set up for virtual hosts, as follows: virtual_mailbox_domains = example.com, sub.example.com virtual_mailbox_maps = hash:/var/www1/vdomains virtual_transport = dovecot where vdomains contains: bar(a)sub.example.com example.com/test/ bar(a)example.com example.com/test/ @sub.example.com example.com/test/ @example.com example.com/test/ postfix will deliver to bar(a)example.com, but not foo(a)example.com. I can't deliver anything to the subdomain. The interesting thing is that 'bar' already has a dovecot mailbox (the 'test' mailbox), but 'foo' doesn't. If this is correct, how do I do wildcard deliveries to dovecot, particularly for the subdomain?

2 2

Dovecot error invalid service_fd
by Michel Verdier 30 Mar '23

30 Mar '23

Hi all On debian stable, dovecot 2.3.13+dfsg1-2+deb11u1 and postfix 3.5.17-0+deb11u1 I set postfix sending mails to dovecot for mailbox storage: mailbox_transport = lmtp:unix:private/dovecot-lmtp dovecot listen with lmtp: service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { mode = 0666 user = postfix group = postfix } } passdb { driver = pam args = session=yes cache_key=%u%r%l dovecot } userdb { driver = passwd } # ls -l /var/spool/postfix/private/dovecot-lmtp srw-rw-rw- 1 postfix postfix 0 27 mars 11:24 /var/spool/postfix/private/dovecot-lmtp I get logs like this: postfix/lmtp[271076]: 6DB551008B3C1: to=..., relay=...[private/dovecot-lmtp], delay=0.7, delays=0.29/0.04/0.11/0.26, dsn=2.0.0, status=sent (250 2.0.0 ... postfix/qmgr[197419]: 6DB551008B3C1: removed dovecot: lmtp(271077): Disconnect from local: Client has quit the connection (state=READY) dovecot: log(253615): Error: Received master input for invalid service_fd 27: 27 271079 BYE I identify 271079 as the pid for dovecot auth worker process. If I add a timeout in dovecot: service auth-worker { idle_kill = 10s } Then I see error log coming 10 seconds after the end of every lmtp connexion from postfix. There is no other log messages around even with debug enable in dovecot. And mails are correctly delivered. Am I missing something or is this to be ignored? Cheers

1 0

Dovecot submission proxy constraints
by Peter Wienemann 29 Mar '23

29 Mar '23

Dear Dovecot experts, in 2017 Stephan Bosch mentioned in an email about the Dovecot submission proxy [0]: "The current implementation does require that the proxy has direct access to the user's mailbox for BURL (e.g. by running it on the same host as imap), but that restriction should be resolved soon, allowing for more complex setups." Is the mentioned restriction (access to mailbox) still valid in 2023 or has this constraint been lifted in the meantime? Best regards, Peter [0] https://dovecot.org/pipermail/dovecot/2017-December/110282.html

1 0

How to use dovecot with more recent versions of solr (8x, 9x)?
by jkdv＠w3.org 27 Mar '23

27 Mar '23

Hello, dovecot version 2.3.13 (89f716dc2) The dovecot solr installation guide [1] gives links and configuration info for sorl 7.7.0. However, sorl was deprecated some time ago. Those links to 7.7.0 don't work anymore. Sorl is currently available in versions 8.11.2 and 9.1.1 [3]. Specifically, one section in the guide states [2]: [[ Install schema.xml and solrconfig.xml Copy doc/solr-config-7.7.0.xml and doc/solr-schema-7.7.0.xml (Since Dovecot 2.3.6+) to /var/solr/data/dovecot/conf/ as solrconfig.xml and schema.xml. The managed-schema file is generated based on schema.xml. ]] Could someone confirm me if those 7.7.0 configuration files are compatible with 8.11.2? A diff between those files and the ones from the 8.11.2 dist reveal some changes, starting from the LuceneVersion. If they are not compatible, could someone tell me what changes were done in the doc/solr files that need to be replicated in the 8.x and 9.x versions? The doc is very opaque there as it only states that you should replace those files but doesn't go into details as to why, making it confusing on how to upgrade to a new version of solr. It would be great if the dovecot/solr doc page could be upgraded to reflect the new versions of solr. Thanks in advance for your help, --jose [1] https://doc.dovecot.org/configuration_manual/fts/solr/ [2] https://doc.dovecot.org/configuration_manual/fts/solr/#solr-configuration [3] https://downloads.apache.org/lucene/solr/

2 1

doveadm expunge unnecessarily tries to access TLS key
by Jesper Dybdal 27 Mar '23

27 Mar '23

I have just upgraded my Debian Buster (Dovecot 2.3.4, I think it was) to Bullseye (Dovecot 2.3.13). The Dovecot server works fine, which of course is the really important thing. But I have a cron job that cleans up all old mail from the mailbox that I use for my mobile phone by running "doveadm expunge" every night. That worked fine in 2.3.4, but now it fails: > jdmobile@nuser:~$ doveadm expunge mailbox '*' before 25d > doveconf: Fatal: Error in configuration file > /etc/dovecot/conf.d/10-ssl.conf line 23: ssl_cert: Can't open file > /etc/letsencrypt/live/nuser.dybdal.dk/fullchain.pem: Permission denied Of course, doveadm cannot access the TLS key when running as a normal user. But why should it try to access that key at all when I have just asked it to clean up my own files in my own Maildir? Is there a way to make it not try to access that key and do its job anyway? Or another way to delete old mail? (I could give it a "-u jdmobile" option and run it as root - but I really like to run things like that as a non-privileged user, so I won't make a stupid mistake that destroys the wrong mailbox.) Thanks, Jesper -- Jesper Dybdal https://www.dybdal.dk

2 2

Dovecot LTO build failure
by Arjen de Korte 26 Mar '23

26 Mar '23

In openSUSE Tumbleweed (and several other distributions as well), packages are build by default with linktime optimization (LTO) enabled. This didn´t work for Dovecot, so until now LTO was disabled for Dovecot. There is a way to make it work though, see the following link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=997513#20 So far a fix has not made it to upstream, the latest version 2.3.30 still fails to build without this patch. Is there any news to report regarding this?

2 1

Re: User authentication using local file
by Horst Simon 23 Mar '23

23 Mar '23

OS environment: Linux qnap-nas 5.10.60-qnap #1 SMP Thu Jan 12 04:39:10 CST 2023 x86_64 GNU/Linux I enabled "auth-passwdfile.conf.ext” in 10-auth.conf #!include auth-deny.conf.ext #!include auth-master.conf.ext #!include auth-system.conf.ext #!include auth-sql.conf.ext #!include auth-ldap.conf.ext !include auth-passwdfile.conf.ext #!include auth-checkpassword.conf.ext #!include auth-static.conf.ext In this file I have following entries and I don’t know what to enter for userdb passdb { driver = passwd-file args = /opt/local/etc/dovecot/users } userdb { driver = passwd-file #args = username_format=%u /opt/local/etc/dovecot/users # Default fields that can be overridden by passwd-file #default_fields = quota_rule=*:storage=1G # Override fields from passwd-file #override_fields = home=/home/virtual/%u } In the users file I have 2 users defined as follow: user1:{SSHA512}<encrypted password>:::::: user2:{SSHA512}<encrypted password:::::: Dovecot gives following error message on startup: Mar 23 08:50:30 master: Info: Dovecot v2.3.20 (80a5ac675d) starting up for imap, lmtp, sieve (core dumps disabled) Mar 23 08:50:30 auth: Debug: Loading modules from directory: /opt/local/lib/dovecot/auth Mar 23 08:50:30 auth: Debug: Module loaded: /opt/local/lib/dovecot/auth/lib20_auth_var_expand_crypt.so Mar 23 08:50:30 auth: Fatal: userdb passwd-file: Missing args I don’t know what arguments I have to enter for userdb Horst > On 22 Mar 2023, at 23:00, Narcis Garcia > > Please, specify OS environment, Dovecot version, and what options did > you try. > > > El 22/3/23 a les 4:52, Horst Simon ha escrit: >> I try to configure to have user authenticate to a local file called >> users, with their mailboxes in ../../spool/dovecot, not in their home >> directories. I have this working correctly with pam authentication on >> different servers(openSuse and macOS). This server has no pam >> authentication so I need to use a local file, but I can not make any >> sense of the documentation, can someone please help on which files I >> need to change and to which values. >> I tried several options but getting all kind of errors with UID. >> >> Horst >> > > -- > > Narcis Garcia > > __________ > I'm using this dedicated address because personal addresses aren't > masked enough at this mail public archive. Public archive administrator > should fix this against automated addresses collectors. > > > ------------------------------ > > Subject: Digest Footer > > _______________________________________________ > dovecot mailing list > dovecot(a)dovecot.org > https://dovecot.org/mailman/listinfo/dovecot > > > ------------------------------ > > End of dovecot Digest, Vol 239, Issue 36 > ****************************************

2 4

User authentication using local file
by Horst Simon 22 Mar '23

22 Mar '23

I try to configure to have user authenticate to a local file called users, with their mailboxes in ../../spool/dovecot, not in their home directories. I have this working correctly with pam authentication on different servers(openSuse and macOS). This server has no pam authentication so I need to use a local file, but I can not make any sense of the documentation, can someone please help on which files I need to change and to which values. I tried several options but getting all kind of errors with UID. Horst

2 1

Re: Error: Can't load SSL certificate
by Horst Simon 22 Mar '23

22 Mar '23

The others are on openSUSE 15.4 and macOS, all are binary installs Entware build options Build options: ioloop=epoll openssl io_block_size=8192 SQL drivers: mysql Passdb: checkpassword ldap passwd passwd-file shadow sql Userdb: checkpassword ldap passwd prefetch passwd-file sql macOS build options Build options: ioloop=kqueue notify=kqueue openssl io_block_size=8192 SQL drivers: mysql Passdb: checkpassword pam passwd passwd-file sql Userdb: checkpassword passwd prefetch passwd-file sql openSUSE build options Build options: ioloop=epoll notify=inotify openssl io_block_size=8192 SQL driver plugins: mysql postgresql sqlite Passdb: checkpassword ldap pam passwd passwd-file shadow sql Userdb: checkpassword ldap(plugin) passwd prefetch passwd-file sql The libz.so are for OpenSUSE and the QNap in the same directories withe the same permissions The macOS does not have a libz.so, this dovecot was build by macports. All servers are running dovecot with the same user accounts. At the moment I will look into this issue later and will try to authenticate without using SSL. On the MACs and openSUSE I authenticate using pam, the QNAP does not use pam so I want to authenticate using a local password file, but I have problems to set it up correctly I have changed it 10-auth.conf to use auth-passwdfile.conf.ext and created a password file called userdb. I don’t know what else to change and what exactly should be in the userdb file. The log only shows Mar 20 23:52:45 auth: Debug: auth client connected (pid=6966) Mar 20 23:52:45 imap-login: Info: Disconnected: Aborted login by logging out (no auth attempts in 0 secs): user=<>, rip=192.168.117.5, lip=192.168.117.2, session=<AhJNZ1T3GcDAqHUF> I need to fix this first before I can enable SSL again. Maybe I should open a new threat Horst > > My suggests to look for: > > 1. Are your other servers setups installed from "Entware for QNAP" too? > 2. Do your other servers have libz.so* located under /opt/lib/ too? > 3. Did you compare owner and permissions of every libz.so* file between > servers too? > 4. Are other servers running Dovecot with same user account? > > > El 20/3/23 a les 4:01, Horst Simon ha escrit: >> I try to logon to map using dovecot with SSL required. I get following >> entries in the log:Mar 20 13:49:30 auth: Debug: Loading modules from >> directory: /opt/lib/dovecot/modules/auth >> Mar 20 13:49:30 auth: Debug: Module loaded: >> /opt/lib/dovecot/modules/auth/lib20_auth_var_expand_crypt.so >> Mar 20 13:49:30 auth: Debug: Read auth token secret from >> /opt/var/run/dovecot/auth-token-secret.dat >> Mar 20 13:49:30 auth: Debug: passwd-file /opt/etc/dovecot/userdb:Read 1 >> users in 0 secs >> Mar 20 13:49:30 auth: Debug: auth client connected (pid=26120) >> Mar 20 13:49:30 imap-login: Error: Failed to initialize SSL server >> context: Can't load SSL certificate (ssl_cert setting): >> error:12800067:DSO support routines::could not load the shared library: >> filename(libz.so): libz.so: cannot open shared object file: No such file >> or directory, error:12800067:DSO support routines::could not load the >> shared library: user=<>, rip=192.168.117.5, lip=192.168.117.2, >> session=<eX3e+Uv3k8DAqHUF> >> Mar 20 13:49:30 imap-login: Info: Disconnected: TLS initialization >> failed. (no auth attempts in 0 secs): user=<>, rip=192.168.117.5, >> lip=192.168.117.2, session=<eX3e+Uv3k8DAqHUF >> >> The library files exist in the include directory >> [/opt] # find . -name libz* -print >> >> ./lib/opkg/info/libzstd.control >> >> ./lib/opkg/info/libzstd.list >> >> ./lib/libz.so >> >> ./lib/libz.so.1 >> >> ./lib/libz.so.1.2.13 >> >> ./lib/libzstd.so >> >> ./lib/libzstd.so.1 >> >> ./lib/libzstd.so.1.5.2 >> >> ./lib/libz.a >> >> >> Have the dovecot settings the same on other servers and it works, >> Dovecot is v2.3.18, installed from Entware for QNAP. Any help?appreciated. >> >> Horst >> >> >> > > -- > > Narcis Garcia >

1 1

ot: how to t/s TBird problems ?
by Voytek Eymont 22 Mar '23

22 Mar '23

I have a Dovecot/Postfix/MariaDB on a Centos, just have a user ask me: ------------------ I recently upgraded my Thunderbird email client and have experienced problems since. It appears that when Tbird polls for new messages it gets held up waiting for a response from the server I'm using POP port 995. Any ideas as to why I'm having a problem ? ------------------- how to investigate such issue ? CentOS release 6.10 (Final) # dovecot --version 2.3.11.3 (502c39af9) load average on server 0.05/0.01 user log shows like: Oct 12 10:08:50 pop3-login: Info: Login: user=<user(a)tld.com.au>, method=PLAIN, rip=49.111.222.333, lip=103.xxx.yyy.zzz, mpid=17371, TLS, session=<E83xW8rqDPkxw3EW> Oct 12 10:09:34 pop3(user(a)tld.com.au)<17371><E83xW8rqDPkxw3EW>: Info: Disconnected: Logged out top=0/0, retr=0/0, del=0/114194, size=10616009472 Oct 12 10:14:36 imap-login: Info: Login: user=<user(a)tld.com.au>, method=PLAIN, rip=49.111.222.333, lip=103.xxx.yyy.zzz, mpid=17460, TLS, session=<ftiLcMrqR/gxw3EW> Oct 12 10:14:37 imap(user(a)tld.com.au)<17460><ftiLcMrqR/gxw3EW>: Info: Logged out in=152 out=69724 deleted=0 expunged=0 trashed=0 hdr_count=0 hdr_bytes=0 body_count=1 body_bytes=68628 Oct 12 10:28:27 pop3-login: Info: Login: user=<user(a)tld.com.au>, method=PLAIN, rip=49.111.222.333, lip=103.xxx.yyy.zzz, mpid=17714, TLS, session=<+WsXosrqK/gxw3EW> Oct 12 10:29:16 pop3(user(a)tld.com.au)<17714><+WsXosrqK/gxw3EW>: Info: Disconnected: Logged out top=0/0, retr=1/76174, del=0/114195, size=10616085600 Oct 12 10:32:19 imap-login: Info: Login: user=<user(a)tld.com.au>, method=PLAIN, rip=49.111.222.333, lip=103.xxx.yyy.zzz, mpid=17817, TLS, session=<bZftr8rqq/gxw3EW> Oct 12 10:32:20 imap(user(a)tld.com.au)<17817><bZftr8rqq/gxw3EW>: Info: Logged out in=153 out=135592 deleted=0 expunged=0 trashed=0 hdr_count=0 hdr_bytes=0 body_count=1 body_bytes=134503 Oct 12 10:45:58 imap-login: Info: Login: user=<user(a)tld.com.au>, method=PLAIN, rip=49.111.222.333, lip=103.xxx.yyy.zzz, mpid=18081, TLS, session=<U3674Mrqzfgxw3EW> Oct 12 10:45:59 imap(user(a)tld.com.au)<18081><U3674Mrqzfgxw3EW>: Info: Logged out in=152 out=24602 deleted=0 expunged=0 trashed=0 hdr_count=0 hdr_bytes=0 body_count=1 body_bytes=23514 Oct 12 10:48:49 pop3-login: Info: Login: user=<user(a)tld.com.au>, method=PLAIN, rip=49.111.222.333, lip=103.xxx.yyy.zzz, mpid=18135, TLS, session=<y1/r6srqtPsxw3EW> Oct 12 10:49:53 pop3(user(a)tld.com.au)<18135><y1/r6srqtPsxw3EW>: Info: Disconnected: Logged out top=0/0, retr=2/166190, del=0/114197, size=10616251743 Oct 12 10:50:42 imap(user(a)tld.com.au)<3274><cr10yqTqifgxw3EW>: Info: Logged out in=192516 out=5957294 deleted=0 expunged=0 trashed=0 hdr_count=263 hdr_bytes=358656 body_count=126 body_bytes=5110403 Oct 12 10:50:42 imap(user(a)tld.com.au)<3271><hLl0yqTqh/gxw3EW>: Info: Logged out in=78324 out=58677 deleted=0 expunged=0 trashed=0 hdr_count=0 hdr_bytes=0 body_count=0 body_bytes=0 Voytek

4 3

iPhone Mail clients generate high Solr I/O
by Alessio Cecchi 22 Mar '23

22 Mar '23

Hi, I'm running a mail server with Dovecot 2.3.20 and Apache Solr as FTS backend. It seems that iPhone/iPad Mail clients are generating some IMAP searches, especially on header Message-ID, that are increasing our Solr I/O load, especially during the night. Are these kind of queries normal? What are they? You can find some logs below. Dovecot logs: Mar 13 21:06:14 dovecot: imap-login: Login: user=<user@domain>, method=PLAIN, rip=x.x.x.x, lip=z.z.z.z, mpid=11263, secured, session=<PQSppM32gePCBJGh> Mar 13 21:06:14 dovecot: imap(user@domain) session=<PQSppM32gePCBJGh>: ID sent: name=iPhone Mail, version=20D67, os=iOS, os-version=16.3.1 (20D67) Mar 13 21:06:14 dovecot: imap(user@domain) session=<PQSppM32gePCBJGh>: Disconnected: Logged out in=207 out=1128 deleted=0 expunged=0 autoexpunged=0 trashed=0 appended=0 hdr_count=0 hdr_bytes=0 body_count=0 body_bytes=0 Solr logs: 2023-03-13 21:06:14.411 INFO (qtp1671846437-1652) [ x:dovecot] o.a.s.c.S.Request [dovecot] webapp=/solr path=/select params={q={!lucene+q.op%3DAND}hdr:<DB8P189MB08692AE65580C36C3B7D6F53C1F59(a)domain6.tld>+OR+hdr:<\!\%26\!AAAAAAAAAAAYAAAAAAAAAI\/Oo\%2BConZZMkCvmEY7yWqjCgAAAEAAAAP968Yud4n1LmhwJxWgTURQBAAAAAA%3D%3D(a)domain5.tld>+OR+hdr:<CALEb\-gfyeQ1zJhjGKS3V8Rn3gk3byNa9co9nOU1L2BtUtKO0aw(a)domain7.tld>+OR+hdr:<AS4P195MB1790AA65F5F367F3CF0888BEDEA19(a)domain5.tld>+OR+hdr:<24E36A6E5BB2410C8090482B3E1EB40F(a)domain8.tld>&fl=uid,score&sort=uid+asc&fq=%2Bbox:d0f433254ee1b161c82c00002e1056c4+%2Buser:user@domain&rows=88&wt=xml} hits=0 status=0 QTime=275 2023-03-13 21:06:14.511 INFO (qtp1671846437-1628) [ x:dovecot] o.a.s.c.S.Request [dovecot] webapp=/solr path=/select params={q={!lucene+q.op%3DAND}hdr:<af03d59c\-2cd5\-1165\-aea5\-6ce7cfe16a89(a)domain.tld>+OR+hdr:<CAJbcrLvxCOGy6fcKBuhuu9B1SALwm9opS\-\-O\-kcMd3nevKrf1A(a)domain7.tld>+OR+hdr:<00eb01d8c8dc$caa8a580$5ff9f080$(a)domain1.tld>+OR+hdr:<VE1PR08MB4846DD525845DC743D47ED52EEBA9(a)domain7.tld>+OR+hdr:<00c701d8bb83$f307bc70$d9173550$(a)domain1.tld>&fl=uid,score&sort=uid+asc&fq=%2Bbox:d0f433254ee1b161c82c00002e1056c4+%2Buser:user@domain&rows=88&wt=xml} hits=0 status=0 QTime=59 2023-03-13 21:06:14.714 INFO (qtp1671846437-1652) [ x:dovecot] o.a.s.c.S.Request [dovecot] webapp=/solr path=/select params={q={!lucene+q.op%3DAND}hdr:<AS4P195MB179002723893D3932AF83A4CDEA29(a)domain5.tld>+OR+hdr:<F3112D85FDF144319FB0ABE348A75AE5(a)domain8.tld>+OR+hdr:<AM9PR10MB510032098A44B16182C9AAF39C4D9(a)domain8.tld>+OR+hdr:<\!\%26\!AAAAAAAAAAAYAAAAAAAAAI\/Oo\%2BConZZMkCvmEY7yWqjCgAAAEAAAADl2MLfkWRxJjQW\%2B3dOhZn0BAAAAAA%3D%3D(a)domain5.tld>+OR+hdr:<CAJbcrLtAEjLO0wbK5AAp8a3p0iRaoUeKA1wsD2ppDFeMnhL\-kA(a)domain7.tld>&fl=uid,score&sort=uid+asc&fq=%2Bbox:d0f433254ee1b161c82c00002e1056c4+%2Buser:user@domain&rows=88&wt=xml} hits=0 status=0 QTime=178 2023-03-13 21:06:14.771 INFO (qtp1671846437-1628) [ x:dovecot] o.a.s.c.S.Request [dovecot] webapp=/solr path=/select params={q={!lucene+q.op%3DAND}hdr:<DU0P189MB208990AA60E3EB5CB2F9BE98DCD39@domain>+OR+hdr:<DDA00A9A19CE4864AD87EF31B0E2113F(a)domain8.tld>+OR+hdr:<GV1PR01MB882049EDFF560AF4F4444F4BB1EE9(a)domain7.tld>&fl=uid,score&sort=uid+asc&fq=%2Bbox:d0f433254ee1b161c82c00002e1056c4+%2Buser:user@domain&rows=88&wt=xml} hits=0 status=0 QTime=34 2023-03-13 21:06:14.899 INFO (qtp1671846437-1652) [ x:dovecot] o.a.s.c.S.Request [dovecot] webapp=/solr path=/select params={q={!lucene+q.op%3DAND}hdr:<AS4P195MB1790922D3154E37AEF263FD1DEDF9(a)domain5.tld>+OR+hdr:<02E5E16DF27945B6A764F49A5D9E055E(a)domain8.tld>+OR+hdr:<CAEK\-5TdF_f%3Dn\%2BL1VWj3EVP9i%3DQe\%2BWaYcW%3DFNy8GSLfE5O1U7dw(a)domain7.tld>+OR+hdr:<4edb1720076ab71575067b0fc2b5d96c(a)domain2.tld>+OR+hdr:<1657012847.68884591(a)domain6.tld>&fl=uid,score&sort=uid+asc&fq=%2Bbox:4830f5144ee1b161c82c00002e1056c4+%2Buser:user@domain&rows=1&wt=xml} hits=0 status=0 QTime=46 Thanks -- Alessio Cecchi Postmaster @http://www.qboxmail.it https://www.linkedin.com/in/alessice

2 1

Import collection of files containing one raw message each into dovecot
by Markus Schönhaber 21 Mar '23

21 Mar '23

Hi, given a bunch of files, each containing the raw source of a single email message. There's no structural or naming scheme like Maildir or something. Is there a (easy) way to import those mails into dovecot? AIUI doveadm import needs a source location in a supported mailbox format - which doesn't seem applicable here. -- Regards mks

2 2

"doveadm altmove -r" not working ?
by Benoit Branciard 21 Mar '23

21 Mar '23

Hello, I have some trouble using "doveadm altmove -r". Regular "doveadm altmove" is OK, selected mails were moved to alternate storage as expected. But I can't manage to get them back to original location, "doveadm altmove -r" has no effect. We are using Dovecot 2.3.4 (Debian Buster package). mail_location = mdbox:~/mdbox:DIRNAME=_@@_dbox-Mails_@@_:ALT=/slow%h/mdbox doveadm altmove -u myuser since 90d -> some message files are created under /slow/my/homedir/mdbox/storage doveadm altmove -r -u myuser all -> message files are still sitting under /slow/my/homedir/mdbox/storage, none were created into /my/homedir/mdbox/storage. Is there some known issues with doveadm altmove in this version ? Or am I missing something ? I can share more config details if needed. -- Benoit BRANCIARD Université Paris 1 Panthéon-Sorbonne - DSIUN-SIS B405 - Centre PMF - 90 rue de Tolbiac - 75013 Paris Tel. 01 44 07 89 68 http://dsiun.univ-paris1.fr

4 5

Read-only / archive mode for IMAP mailboxes?
by Rᴇɴᴇ́ Pꜰᴇɪꜰꜰᴇʀ 20 Mar '23

20 Mar '23

Hello! We are currently exploring email archiving solutions. Is there a way to use an IMAP mailbox in read-only / archive mode? The requirement is that delibveries of new emails should be possible (via SMTP/LMTP), but no messages should be deleted via IMAP access. Frankly I don't think this works, but maybe some of you have tried this already. Regards, René. -- )\._.,--....,'``. fL Let GNU/Linux work for you while you take a nap. /, _.. \ _\ (`._ ,. R. Pfeiffer <lynx at luchs.at> + https://web.luchs.at/ `._.-(,_..'--(,_..'`-.;.' - System administration + Consulting + Teaching - 📨 Got mail delivery problems? https://web.luchs.at/information/blockedmail.php 📯 Complete contact information: https://web.luchs.at/kontakt/ 🔏 Download latest GPG/PGP keys: https://web.luchs.at/kontakt/gpg.asc ⛔ W͇A͇R͇N͇I͇N͇G͇:͇ ͇D͇O͇ ͇_͇N͇O͇T͇_͇ ͇S͇E͇N͇D͇ ͇E͇M͇A͇I͇L͇S͇ ͇W͇I͇T͇H͇ ͇H͇T͇M͇L͇ ͇C͇O͇N͇T͇E͇N͇T͇ ͇T͇O͇ ͇M͇Y͇ ͇E͇M͇A͇I͇L͇ ͇A͇D͇D͇R͇E͇S͇S͇!͇ ⛔

3 3

Remote backup of IMAP user fails with dsync_remote epoll_ctl error
by dml＠plumeriahale.net 20 Mar '23

20 Mar '23

I’m trying backup a user’s IMAP folders from a system running dovecot 2.1.7. to a system running dovecot 2.3.19.1. After much perusing of the web and Dovecot documentation I tried this: 1) On the 2.1.7 host set up the doveadm server to listen on TCP port 2425 and defined a doveadm_password value 2) Issued the following command on the 2.13.19.1 system: doveadm -o doveadm_password=<password> backup -R -u <username> -S <host>:2425 tcp:<host> 3) The command returned the following errors: Error: doveadm server disconnected before handshake: EOF Error: Command backup failed for <username>: EOF 4) In the Dovecot log on the 2.1.7 system I found the following error message: dsync(<username>): Error: user <username>: Initialization failed: Namespace '': Unknown mail storage driver tcp dovecot: dsync(<username>): Fatal: User init failed A couple of questions: 1) I thought that setting up doveadm-server as an inet_listener (with a password) meant that all communications (including the backup) occurred over that link - is that not correct? Or does SSH also need to be enabled as well? 2) Am I specifying the arguments correctly? The definition of the destination argument is confusing in the documentation - if doveadm is trying to backup a user’s IMAP mailboxes from a remote source, and you’ve already specified the information needed to connect to the remote sources doveadm-server why would the source need to be specified again via the TCP: argument?

1 0

Disable folder creation for details username
by Robert Blayzor 20 Mar '23

20 Mar '23

This may be more of a CPanel issue than Dovecot but CPanel uses Dovecot and not sure if this is a knob we have available in Dovecot or we need to reach out to Cpanel directly to see if this is some custom code they added to their distros. Anyway, W/R/T emails sent with dtails/ + addresses ie: foo+bar(a)mydomain.com And with LDA/LMTP, in Cpanel by default the detials part, in this case "bar" will be created in it's own folder. Automatically. To us, this can be an attack vector/DOS from a malicious actor so we want to turn it off. We understand there is: lda_mailbox_autocreate Which we have yes, as we do want to create mailboxes automatically when the first message comes in, but not these folders. I don't know if this folder autocreation on detail part is a Dovecot thing, or specific to Cpanel. It appears CPanel has a patch/code to option to turn it off, but it's only on a per mailbox basis. We want to turn this behavior off globally. As far as I know, CPanel doesn't release whatever patches they made to make this happen, asking here if anyone has experience with this before we start chasing them for answers. -- inoc.net!rblayzor XMPP: rblayzor.AT.inoc.net PGP: https://pgp.inoc.net/rblayzor/

2 2

Dovecot unified event filtering
by Felix Auringer 20 Mar '23

20 Mar '23

Hello, I have an issue with debug logging when using a custom plugin for Dovecot. In my plugin, I create a child event of the session's user event: ```c struct event *plugin_event = event_create(list->ns->user->event); event_set_name(plugin_event, "oidc_shared_mailboxes_plugin"); event_set_min_log_level(plugin_event, LOG_TYPE_WARNING); event_set_append_log_prefix(plugin_event, "oidc-shared-mailboxes-plugin: "); ``` I then use passthrough events like the following: ``` e_debug(event_create_passthrough(data->event)->event(), "Modified mailbox_list_iter_init was called."); e_warning(event_create_passthrough(event)->event(), "Did not find required key 'roles' in the JWT body."); ``` `e_warning` and `e_error` work fine. If I understand the documentation for the unified event filtering (https://doc.dovecot.org/configuration_manual/event_filter/#unified-filter-l…) correctly, I should be able to enable debug logging for with `log_debug = event="oidc_shared_mailboxes_plugin"`. However, this setting has no influence on the logging behavior. The setting I have to set for the debug logging to work is `mail_debug = yes` (I do not have to set `log_debug` at all). Is this intended behavior or am I doing something wrong? Best regards, Felix Auringer Here is the output of `dovecot -n` (I removed the passdb, userdb, namespace, service, and managesieve settings as they cluttered the output): ``` # 2.3.19 (b3ad6004dc): /etc/dovecot/dovecot.conf # Pigeonhole version 0.5.19 (4eae2f79) # OS: Linux 5.10.0-15-amd64 x86_64 Debian 11.6 # Hostname: c3dd5b346d22 auth_mechanisms = plain login xoauth2 oauthbearer debug_log_path = /dev/stdout disable_plaintext_auth = no first_valid_uid = 1000 info_log_path = /dev/stdout last_valid_uid = 1000 log_debug = event="oidc_shared_mailboxes_plugin" log_path = /dev/stdout login_greeting = Hello there! .... GIZ Mail! mail_location = maildir:~/mail mail_plugins = " oidc_shared_mailboxes" plugin { oidc_shared_mailboxes_client_id = dovecot-test } protocols = imap lmtp ``` --- Gesellschaft für interkulturelles Zusammenleben gGmbH (GIZ) Felix Auringer IT Reformationsplatz 2 13597 Berlin Tel: 030/513 0100 00; Fax: 030/513 0100 09 www.giz.berlin; felix.auringer(a)giz.berlin Amtsgericht Charlottenburg HRB 200872 B Geschäftsführerin: Dr. Britta Marschke

2 1

Error: Can't load SSL certificate
by Horst Simon 20 Mar '23

20 Mar '23

I try to logon to map using dovecot with SSL required. I get following entries in the log:Mar 20 13:49:30 auth: Debug: Loading modules from directory: /opt/lib/dovecot/modules/auth Mar 20 13:49:30 auth: Debug: Module loaded: /opt/lib/dovecot/modules/auth/lib20_auth_var_expand_crypt.so Mar 20 13:49:30 auth: Debug: Read auth token secret from /opt/var/run/dovecot/auth-token-secret.dat Mar 20 13:49:30 auth: Debug: passwd-file /opt/etc/dovecot/userdb:Read 1 users in 0 secs Mar 20 13:49:30 auth: Debug: auth client connected (pid=26120) Mar 20 13:49:30 imap-login: Error: Failed to initialize SSL server context: Can't load SSL certificate (ssl_cert setting): error:12800067:DSO support routines::could not load the shared library: filename(libz.so): libz.so: cannot open shared object file: No such file or directory, error:12800067:DSO support routines::could not load the shared library: user=<>, rip=192.168.117.5, lip=192.168.117.2, session=<eX3e+Uv3k8DAqHUF> Mar 20 13:49:30 imap-login: Info: Disconnected: TLS initialization failed. (no auth attempts in 0 secs): user=<>, rip=192.168.117.5, lip=192.168.117.2, session=<eX3e+Uv3k8DAqHUF The library files exist in the include directory [/opt] # find . -name libz* -print ./lib/opkg/info/libzstd.control ./lib/opkg/info/libzstd.list ./lib/libz.so ./lib/libz.so.1 ./lib/libz.so.1.2.13 ./lib/libzstd.so ./lib/libzstd.so.1 ./lib/libzstd.so.1.5.2 ./lib/libz.a Have the dovecot settings the same on other servers and it works, Dovecot is v2.3.18, installed from Entware for QNAP. Any help appreciated. Horst

2 1

Can't seem to setup remote access to doveadmI'm using
by dml＠plumeriahale.net 18 Mar '23

18 Mar '23

I’m running version 2.1.7 under Raspbian Wheezy (and have been for a number of years). I want to allow one of my other computers to remotely issue doveadm commands to my server but can’t seem to find the right way to add an inet listener to permit this. Using ‘doveconf -a’ I’ve found the default service definition for doveadm-server. So I copied that and added it to the dovecot configuration with an inet listener section added to it. But that was rejected as a duplicate service definition when I restarted dovecot. I then tried specifying a “host:port” value for the doveadm_socket_path value but that didn’t work as no listening socket at that port appeared when I restarted dovecot. I can’t seem to find in any of the dovecot documentation a way to do this and there seems to be nothing like a “Here’s how to setup doveadm remote access” section in the documentation (which would be most helpful). How can I get doveadm-server to listen not only locally (as it’s already doing) but also open an inet port for remote access?

3 2

Re: [EXT] Re: Corrupted sizes using zlib plugin
by Tim Evers 16 Mar '23

16 Mar '23

Am 06.03.23 um 16:45 schrieb Aki Tuomi: >> On 06/03/2023 16:52 EET Tim Evers <te-ml-ext(a)artfiles.de> wrote: >> >> >> Am 06.03.23 um 15:29 schrieb Aki Tuomi: >>>> On 06/03/2023 15:56 EET Tim Evers <te-ml-ext(a)artfiles.de> wrote: >>>> >>>> >>>> Am 06.03.23 um 14:49 schrieb Aki Tuomi: >>>>>> On 06/03/2023 15:45 EET Tim Evers <te-ml-ext(a)artfiles.de> wrote: >>>>>> >>>>>> >>>>>> Am 06.03.23 um 14:00 schrieb Aki Tuomi: >>>>>>>> On 06/03/2023 13:06 EET Tim Evers <te-ml-ext(a)artfiles.de> wrote: >>>>>>>> >>>>>>>> >>>>>>>> Am 06.03.23 um 11:59 schrieb Aki Tuomi: >>>>>>>> >>>>>>>>>> On 06/03/2023 12:44 EET Tim Evers <te-ml-ext(a)artfiles.de> wrote: >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Am 06.03.23 um 11:42 schrieb Aki Tuomi: >>>>>>>>>> >>>>>>>>>>>> On 06/03/2023 12:32 EET Tim Evers <te-ml-ext(a)artfiles.de> wrote: >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> Hi, >>>>>>>>>>>> >>>>>>>>>>>> since I did not get any feedback on my bug report post regarding >>>>>>>>>>>> corrupted sizes while using zlib >>>>>>>>>>>> (https://dovecot.org/pipermail/dovecot/2023-February/126105.html) I >>>>>>>>>>>> would like to confirm that this bug report reached someone in charge. >>>>>>>>>>>> >>>>>>>>>>>> Or if not - I would kindly ask for directions on how to post it in a way >>>>>>>>>>>> that spawns some action. >>>>>>>>>>>> >>>>>>>>>>>> Thx >>>>>>>>>>>> >>>>>>>>>>>> Tim >>>>>>>>>>> Can you try erasing dovecot.index.cache and see if the problem fixes itself? It's possible your cache contains invalid values from old errors. >>>>>>>>>>> >>>>>>>>>>> Aki >>>>>>>>>> Did that already several times (other dovecot.index.* files too). The >>>>>>>>>> only thing that helps is actually deleting the dovecot-uidlist file but >>>>>>>>>> the problem returns. >>>>>>>>>> >>>>>>>>>> Tim >>>>>>>>> I think it's because the value on the filename is wrong. The filename contains the virtual and physical size. >>>>>>>>> >>>>>>>>> Can you try if https://github.com/dovecot/tools/blob/main/maildir-size-fix.pl fixes your issue? >>>>>>>>> >>>>>>>>> Aki >>>>>>>> Quoting >>>>>>>> >>>>>>>> https://doc.dovecot.org/configuration_manual/zlib_plugin/ : >>>>>>>> >>>>>>>> "All mails must have ,|S=<size>|in their filename where <size> contains >>>>>>>> the original uncompressed mail size, otherwise there will be problems >>>>>>>> with quota calculation as well as other potential random failures." >>>>>>>> >>>>>>>> And the script you send: >>>>>>>> >>>>>>>> "# Check if the files are compressed. Use the uncompressed size for S=size." >>>>>>>> >>>>>>>> Which it does in my example. S= contains the uncompressed size, not the >>>>>>>> size on disk. Is this not correct? All Files are written exclusively by >>>>>>>> dovecot, no other software is involved. >>>>>>>> >>>>>>>> Tim >>>>>>> Can you send output from `doveconf -n`? I am having suspicion that zlib plugin isn't always involved in your config, which causes the compressed file to be cached wrongly. Especially it feels like your IMAP protocol does not have compression on while LMTP does. >>>>>>> >>>>>>> Aki >>>>>> Actually it is the other way round (I removed zlib from lmtp to reduce >>>>>> the impact of the problem): >>>>>> >>>>>> # 2.3.20 (80a5ac675d): /etc/dovecot/dovecot.conf >>>>>> # Pigeonhole version 0.5.20 (149edcf2) >>>>>> # OS: Linux 4.15.0-204-generic x86_64 Ubuntu 18.04.6 LTS >>>>>> # Hostname: node2.mst27.artfiles.de >>>>>> auth_verbose = yes >>>>>> auth_worker_max_count = 1000 >>>>>> default_client_limit = 5000 >>>>>> dict { >>>>>> sqlquota = mysql:/etc/dovecot/dovecot-dict-sql.conf.ext >>>>>> } >>>>>> disable_plaintext_auth = no >>>>>> import_environment = TZ CLUSTERNAME >>>>>> lda_mailbox_autocreate = yes >>>>>> lda_mailbox_autosubscribe = yes >>>>>> mail_location = maildir:~/Maildir >>>>>> mail_plugins = " mail_log notify old_stats" >>>>>> mailbox_idle_check_interval = 10 mins >>>>>> maildir_broken_filename_sizes = yes >>>>>> managesieve_notify_capability = mailto >>>>>> managesieve_sieve_capability = fileinto reject envelope >>>>>> encoded-character vacation subaddress comparator-i;ascii-numeric >>>>>> relational regex imap4flags copy include variables body enotify >>>>>> environment mailbox date index ihave duplicate mime foreverypart >>>>>> extracttext editheader imapsieve vnd.dovecot.imapsieve >>>>>> namespace inbox { >>>>>> inbox = yes >>>>>> location = >>>>>> mailbox Drafts { >>>>>> auto = subscribe >>>>>> special_use = \Drafts >>>>>> } >>>>>> mailbox Junk { >>>>>> auto = subscribe >>>>>> special_use = \Junk >>>>>> } >>>>>> mailbox Sent { >>>>>> auto = subscribe >>>>>> special_use = \Sent >>>>>> } >>>>>> mailbox "Sent Messages" { >>>>>> special_use = \Sent >>>>>> } >>>>>> mailbox Trash { >>>>>> auto = subscribe >>>>>> special_use = \Trash >>>>>> } >>>>>> prefix = INBOX. >>>>>> separator = . >>>>>> } >>>>>> passdb { >>>>>> args = /etc/dovecot/dovecot-sql.conf.ext >>>>>> driver = sql >>>>>> } >>>>>> plugin { >>>>>> imapsieve_mailbox1_before = file:~/af_report-spam.sieve >>>>>> imapsieve_mailbox1_causes = COPY >>>>>> imapsieve_mailbox1_name = INBOX.Junk >>>>>> imapsieve_mailbox2_before = file:~/af_report-ham.sieve >>>>>> imapsieve_mailbox2_causes = COPY >>>>>> imapsieve_mailbox2_from = INBOX.Junk >>>>>> imapsieve_mailbox2_name = * >>>>>> quota = dict:User quota::proxy::sqlquota >>>>>> quota_rule = *:storage=0:messages=0 >>>>>> sieve = file:~/sieve;active=~/.dovecot.sieve >>>>>> sieve_before = file:~/af_master.sieve >>>>>> sieve_before2 = file:~/af_konto.sieve >>>>>> sieve_before3 = file:~/af_domain.sieve >>>>>> sieve_before4 = file:~/af_spamfilter.sieve >>>>>> sieve_extensions = +editheader >>>>>> sieve_filter_bin_dir = /usr/local/bin/sieve >>>>>> sieve_global_extensions = +vnd.dovecot.pipe +vnd.dovecot.filter >>>>>> +vnd.dovecot.environment >>>>>> sieve_max_redirects = 100 >>>>>> sieve_pipe_bin_dir = /usr/local/bin/sieve >>>>>> sieve_plugins = sieve_imapsieve sieve_extprograms >>>>>> stats_refresh = 30 secs >>>>>> zlib_save = gz >>>>>> zlib_save_level = 6 >>>>>> } >>>>>> pop3_no_flag_updates = yes >>>>>> protocols = " imap lmtp sieve pop3" >>>>>> service anvil { >>>>>> client_limit = 6203 >>>>>> } >>>>>> service auth-worker { >>>>>> process_limit = 1000 >>>>>> } >>>>>> service auth { >>>>>> client_limit = 6300 >>>>>> } >>>>>> service dict { >>>>>> process_limit = 500 >>>>>> unix_listener dict { >>>>>> group = vmail >>>>>> mode = 0600 >>>>>> user = vmail >>>>>> } >>>>>> } >>>>>> service imap-login { >>>>>> process_limit = 4000 >>>>>> process_min_avail = 0 >>>>>> service_count = 0 >>>>>> vsz_limit = 512 M >>>>>> } >>>>>> service imap { >>>>>> client_limit = 1 >>>>>> process_limit = 4000 >>>>>> vsz_limit = 1 G >>>>>> } >>>>>> service lmtp { >>>>>> inet_listener lmtp { >>>>>> address = 127.0.0.1 >>>>>> port = 10024 >>>>>> } >>>>>> process_limit = 80 >>>>>> process_min_avail = 20 >>>>>> vsz_limit = 2 G >>>>>> } >>>>>> service pop3-login { >>>>>> process_limit = 2000 >>>>>> service_count = 0 >>>>>> vsz_limit = 512 M >>>>>> } >>>>>> service pop3 { >>>>>> client_limit = 1 >>>>>> process_limit = 2000 >>>>>> vsz_limit = 1 G >>>>>> } >>>>>> service stats { >>>>>> fifo_listener stats-mail { >>>>>> mode = 0600 >>>>>> user = vmail >>>>>> } >>>>>> } >>>>>> ssl_cert = </etc/dovecot/private/dovecot.pem >>>>>> ssl_client_ca_dir = /etc/ssl/certs >>>>>> ssl_key = # hidden, use -P to show it >>>>>> submission_host = smtp4.artfiles.de >>>>>> syslog_facility = local5 >>>>>> userdb { >>>>>> args = /etc/dovecot/dovecot-sql.conf.ext >>>>>> driver = sql >>>>>> } >>>>>> protocol lmtp { >>>>>> mail_plugins = " mail_log notify old_stats sieve quota" >>>>>> } >>>>>> protocol imap { >>>>>> mail_max_userip_connections = 50 >>>>>> mail_plugins = " mail_log notify old_stats quota imap_quota >>>>>> imap_sieve zlib imap_old_stats" >>>>>> rawlog_dir = /var/log/rawlog/%u >>>>>> } >>>>>> protocol pop3 { >>>>>> mail_max_userip_connections = 50 >>>>>> mail_plugins = " mail_log notify old_stats zlib" >>>>>> } >>>>> It will probably compound on the issue though, especially when rebuilding caches and indexes, as it will record the sizes wrong. I'm not sure if this is *really* the issue, but it's most likely culprit. The 8192 is very odd number to have there, which either indicates that the zlib plugin is not consistently used, or you have some issues with the gz library itself. >>>>> >>>>> Aki >>>> Not sure if I understand this - shouldn't dovecot always note the >>>> decompressed size in cache and filename regardless if it's compressed or >>>> not? >>>> >>>> I just removed the zlib plugin from lmtp to reduce the footprint of the >>>> problem. The problem itself showed up first while lmtp zlib was on. >>>> >>>> Tim >>> It is complaining about the **physical** size though, that is, the amount stored on disk. If you have a dovecot process which is unaware of compression, it can record the wrong size for the file. >>> >>> Aki >> OK, I see. Another thing I noticed: The uidlist entry for a suspicious >> number of these problematic files contains what looks like a GUID: >> >> G1674674677.M641373P33277.node2 >> >> If I remove the uidlist and let dovecot recreate it, it is usually gone. >> Might that be an indicator of some other process writing to the uidlist >> file? the GUID is not mentioned in the dovecot docs as far as I can see. >> >> Tim > It sure sounds like that. > > Aki OK, for future reference: I think I found the issue. There was a periodic doveadm quotacheck job that was unaware of the zlib compression. I fixed that and no new corruption occured (though I still see errors from already corrupted cache data - that will hopefully dry up over time). However: I have still no idea why dovecot is complaining about the index.* files. It seems that the source of the wrong data is the dovecot-uidlist. Also I don't see why the quotacheck cmd (doveadm quota recalc -u <>) **sometimes** updates the dovecot-uidlist file. The quota itself is stored in a sql dict. Thanks to all who provided their input and especially Aki for the support! Tim

1 0

Postfix : root and system user authentication
by Aymeric Agon-Rambosson 16 Mar '23

16 Mar '23

Hello everyone, >From what I understand of the documentation, it is impossible to log in to the dovecot server as root, or as any user not in the interval between first_valid_uid and last_valid_uid. I have been able to verify this. However, when we have a postfix server on the same machine, that delegates authentication to dovecot SASL according to the configuration described at https://doc.dovecot.org/configuration_manual/howto/postfix_and_dovecot_sasl/, we can indeed log in as root on the postfix server. Proof (/var/log/mail.log with auth=debug) : Mar 13 20:16:37 ricorambo dovecot: auth: Debug: client in: AUTH#0111#011PLAIN#011service=smtp#011nologin#011lip=<redacted>#011rip=<redacted>#011secured#011resp=<hidden> Mar 13 20:16:37 ricorambo dovecot: auth: Debug: pam(root,<redacted>): Performing passdb lookup Mar 13 20:16:37 ricorambo dovecot: auth-worker(136499): Debug: Loading modules from directory: /usr/lib/dovecot/modules/auth Mar 13 20:16:37 ricorambo dovecot: auth-worker(136499): Debug: Module loaded: /usr/lib/dovecot/modules/auth/lib20_auth_var_expand_crypt.so Mar 13 20:16:37 ricorambo dovecot: auth-worker(136499): Debug: conn unix:auth-worker (pid=136444,uid=111): Server accepted connection (fd=13) Mar 13 20:16:37 ricorambo dovecot: auth-worker(136499): Debug: conn unix:auth-worker (pid=136444,uid=111): Sending version handshake Mar 13 20:16:37 ricorambo dovecot: auth-worker(136499): Debug: conn unix:auth-worker (pid=136444,uid=111): auth-worker<1>: Handling PASSV request Mar 13 20:16:37 ricorambo dovecot: auth-worker(136499): Debug: conn unix:auth-worker (pid=136444,uid=111): auth-worker<1>: pam(root,<redacted>): Performing passdb lookup Mar 13 20:16:37 ricorambo dovecot: auth-worker(136499): Debug: conn unix:auth-worker (pid=136444,uid=111): auth-worker<1>: pam(root,<redacted>): lookup service=dovecot Mar 13 20:16:37 ricorambo dovecot: auth-worker(136499): Debug: conn unix:auth-worker (pid=136444,uid=111): auth-worker<1>: pam(root,<redacted>): #1/1 style=1 msg=Password: Mar 13 20:16:37 ricorambo dovecot: auth-worker(136499): Debug: conn unix:auth-worker (pid=136444,uid=111): auth-worker<1>: pam(root,<redacted>): Finished passdb lookup Mar 13 20:16:37 ricorambo dovecot: auth-worker(136499): Debug: conn unix:auth-worker (pid=136444,uid=111): auth-worker<1>: Finished Mar 13 20:16:37 ricorambo dovecot: auth: Debug: pam(root,<redacted>): Finished passdb lookup Mar 13 20:16:37 ricorambo dovecot: auth: Debug: auth(root,<redacted>): Auth request finished Mar 13 20:16:37 ricorambo dovecot: auth: Debug: client passdb out: OK#0111#011user=root#011 At this moment, the smtps client connecting to postfix produces "Authentication successful" and we can continue. In contrast, when we try to login to dovecot directly as root, we have the following : Mar 13 20:28:38 ricorambo dovecot: auth: Debug: client in: AUTH#0111#011PLAIN#011service=imap#011secured=tls#011session=<redacted>#011lip=<redacted>#011rip=<redacted>#011lport=993#011rport=52004#011local_name=mail.ricorambo.su#011resp=<hidden> Mar 13 20:28:38 ricorambo dovecot: auth: Debug: pam(root,<redacted>,<redacted>): Performing passdb lookup Mar 13 20:28:38 ricorambo dovecot: auth-worker(137089): Debug: Loading modules from directory: /usr/lib/dovecot/modules/auth Mar 13 20:28:38 ricorambo dovecot: auth-worker(137089): Debug: Module loaded: /usr/lib/dovecot/modules/auth/lib20_auth_var_expand_crypt.so Mar 13 20:28:38 ricorambo dovecot: auth-worker(137089): Debug: conn unix:auth-worker (pid=137079,uid=111): Server accepted connection (fd=13) Mar 13 20:28:38 ricorambo dovecot: auth-worker(137089): Debug: conn unix:auth-worker (pid=137079,uid=111): Sending version handshake Mar 13 20:28:38 ricorambo dovecot: auth-worker(137089): Debug: conn unix:auth-worker (pid=137079,uid=111): auth-worker<1>: Handling PASSV request Mar 13 20:28:38 ricorambo dovecot: auth-worker(137089): Debug: conn unix:auth-worker (pid=137079,uid=111): auth-worker<1>: pam(root,<redacted>,<redacted>): Performing passdb lookup Mar 13 20:28:38 ricorambo dovecot: auth-worker(137089): Debug: conn unix:auth-worker (pid=137079,uid=111): auth-worker<1>: pam(root,<redacted>,<redacted>): lookup service=dovecot Mar 13 20:28:38 ricorambo dovecot: auth-worker(137089): Debug: conn unix:auth-worker (pid=137079,uid=111): auth-worker<1>: pam(root,<redacted>,<redacted>): #1/1 style=1 msg=Password: Mar 13 20:28:38 ricorambo dovecot: auth-worker(137089): Debug: conn unix:auth-worker (pid=137079,uid=111): auth-worker<1>: pam(root,<redacted>,<redacted>): Finished passdb lookup Mar 13 20:28:38 ricorambo dovecot: auth-worker(137089): Debug: conn unix:auth-worker (pid=137079,uid=111): auth-worker<1>: Finished Mar 13 20:28:38 ricorambo dovecot: auth: Debug: pam(root,<redacted>,<eU8pHs32JMuE40wF>): Finished passdb lookup Mar 13 20:28:38 ricorambo dovecot: auth: Debug: auth(root,<redacted>,<eU8pHs32JMuE40wF>): Auth request finished Mar 13 20:28:38 ricorambo dovecot: auth: Debug: client passdb out: OK#0111#011user=root#011#011original_user=root(a)ricorambo.su Mar 13 20:28:38 ricorambo dovecot: auth: Debug: master in: REQUEST#<redacted> Mar 13 20:28:38 ricorambo dovecot: auth: Debug: passwd(root,<redacted>,<redacted>): Performing userdb lookup Mar 13 20:28:38 ricorambo dovecot: auth-worker(137089): Debug: conn unix:auth-worker (pid=137079,uid=111): auth-worker<2>: Handling USER request Mar 13 20:28:38 ricorambo dovecot: auth-worker(137089): Debug: conn unix:auth-worker (pid=137079,uid=111): auth-worker<2>: passwd(root,<redacted>,<redacted>): Performing userdb lookup Mar 13 20:28:38 ricorambo dovecot: auth-worker(137089): Debug: conn unix:auth-worker (pid=137079,uid=111): auth-worker<2>: passwd(root,<redacted>,<redacted>): lookup Mar 13 20:28:38 ricorambo dovecot: auth-worker(137089): Debug: conn unix:auth-worker (pid=137079,uid=111): auth-worker<2>: passwd(root,<redacted>,<redacted>): Finished userdb lookup Mar 13 20:28:38 ricorambo dovecot: auth-worker(137089): Debug: conn unix:auth-worker (pid=137079,uid=111): auth-worker<2>: Finished Mar 13 20:28:38 ricorambo dovecot: auth: Debug: passwd(root,<redacted>,<redacted>): Finished userdb lookup Mar 13 20:28:38 ricorambo dovecot: auth: Debug: master userdb out: USER#<redacted> Mar 13 20:28:38 ricorambo dovecot: imap-login: Login: user=<root>, method=PLAIN, rip=<redacted>, lip=192.168.1.22, mpid=137090, TLS, session=<redacted> Mar 13 20:28:38 ricorambo dovecot: imap(root): Error: Invalid settings in userdb: userdb returned 0 as uid Mar 13 20:28:38 ricorambo dovecot: imap(root): Warning: Event 0xaaab0e9db2a0 leaked (parent=0xaaab0e9cdc80): mail-storage-service.c:1336 Mar 13 20:28:38 ricorambo dovecot: imap(root): Warning: Event 0xaaab0e9cdc80 leaked (parent=(nil)): main.c:246 At this moment, the imap client produces "Internal server error" and finishes. Steps to reproduce : - Delegate SASL authentication from postfix to dovecot as such : /etc/postfix/master.cf smtps inet n - y - - smtpd -o syslog_name=postfix/smtps -o smtpd_tls_wrappermode=yes -o smtpd_sasl_auth_enable=yes -o smtpd_relay_restrictions=permit_sasl_authenticated,reject -o smtpd_recipient_restrictions=permit_sasl_authenticated,reject -o smtpd_sasl_type=dovecot -o smtpd_sasl_path=private/auth and of course : /etc/dovecot/conf.d/10-master.conf unix_listener /var/spool/postfix/private/auth { mode = 0660 user = postfix group = postfix } - login to your server, port 465, with a client like openssl : openssl s_client -connect mail.example.org:465 EHLO whateveryouwant AUTH PLAIN \0root\0password (in base 64, ofc) You should be able to login, and produce the first log trace I have included. My question is, is this a feature or a bug ? The hardcoded impossibility to login as root to dovecot, and the honouring of the variables {first,last}_valid_{u,g}id, are those specific to login to dovecot directly, or should they be applicable to any other process that has delegated its authentication to dovecot ? If this is a feature, that is if postfix cannot profit from the variables {first,last}_valid_{u,g}id (or the hardcoded forbidding of root) through dovecot sasl : - This should maybe made more obvious somewhere in the documentation. - What would be the good way to prevent root login to postfix, when authentication is delegated to dovecot ? The dovecot version is 2.3.13 (89f716dc2) The system is the following : Linux 5.10.0-21-arm64 #1 SMP Debian 5.10.162-1 (2023-01-21) aarch64 GNU/Linux Thank you in advance for your time. I have included the output of dovecot -n for reference. Best regards, Aymeric

6 10

Build dovecot from source
by Horst Simon 16 Mar '23

16 Mar '23

I am sorry if this is not the correct list for asking this. T try to build dovecot 2.3.20 from source on a QNAP NAS, which is a linux variant. There is an dovecot available, but this does not include a pigeonhole sieve, that’s why I try to build it from source. The configure script works fine, but the make fails as follows: *** Warning: Linking the executable test-http-payload against the loadable module *** libssl_iostream_openssl.so is not portable! libtool: link: gcc -std=gnu99 -g -O2 -fstack-protector-strong -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -mfunction-return=keep -mindirect-branch=keep -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -fno-builtin-strftime -Wstrict-aliasing=2 -Wl,--as-needed -o .libs/test-http-payload test-http-payload.o -Wl,--export-dynamic -L/share/CACHEDEV1_DATA/.qpkg/Entware/lib -L/share/CACHEDEV1_DATA/.qpkg/Apache81/lib ./.libs/libhttp.a ../lib-dns/.libs/libdns.a ../lib-ssl-iostream/.libs/libssl_iostream.a ../lib-master/.libs/libmaster.a ../lib-auth/.libs/libauth.a ../lib-settings/.libs/libsettings.a ../lib-test/.libs/libtest.a ../lib/.libs/liblib.a -ldl ../lib-ssl-iostream/.libs/libssl_iostream_openssl.so -Wl,-rpath -Wl,/opt/lib/dovecot /opt/bin/ld: ../lib-ssl-iostream/.libs/libssl_iostream_openssl.so: undefined reference to `ENGINE_set_default@OPENSSL_1_1_0' /opt/bin/ld: ../lib-ssl-iostream/.libs/libssl_iostream_openssl.so: undefined reference to `ENGINE_init@OPENSSL_1_1_0' /opt/bin/ld: ../lib-ssl-iostream/.libs/libssl_iostream_openssl.so: undefined reference to `ENGINE_load_builtin_engines@OPENSSL_1_1_0' /opt/bin/ld: ../lib-ssl-iostream/.libs/libssl_iostream_openssl.so: undefined reference to `ENGINE_free@OPENSSL_1_1_0' /opt/bin/ld: ../lib-ssl-iostream/.libs/libssl_iostream_openssl.so: undefined reference to `ENGINE_finish@OPENSSL_1_1_0' /opt/bin/ld: ../lib-ssl-iostream/.libs/libssl_iostream_openssl.so: undefined reference to `ENGINE_by_id@OPENSSL_1_1_0' collect2: error: ld returned 1 exit status make[3]: *** [Makefile:892: test-http-payload] Error 1 make[3]: Leaving directory '/share/CACHEDEV1_DATA/temp/dovecot-2.3.20/src/lib-http' make[2]: *** [Makefile:573: all-recursive] Error 1 make[2]: Leaving directory '/share/CACHEDEV1_DATA/temp/dovecot-2.3.20/src' make[1]: *** [Makefile:702: all-recursive] Error 1 make[1]: Leaving directory '/share/CACHEDEV1_DATA/temp/dovecot-2.3.20' make: *** [Makefile:546: all] Error 2 I already asked in the GitHub forum, but haven’t received any answers, that why I m asking here if anyone can help me to get it working. Horst

1 0

Bug with lmtp_save_to_detail_mailbox
by Dejan 15 Mar '23

15 Mar '23

> lmtp_save_to_detail_mailbox = yes Plus-delivery conflicts with existing, reserved files such as "subscriptions": Message for kim+subscriptions@ results in: lmtp(kim(a)***.com)<14493><SK7sEvaHEWSdOAAAvAYmHA>: Error: ....stat(/var/mails/***/kim/Maildir/subscriptions/tmp) failed: Not a directory Version: 2.3.18

2 4

dovecot crash with Panic: file istream-header-filter.c: line 663
by Patrick Mansfield 13 Mar '23

13 Mar '23

Hi - I'm hitting a crash in dovecot, I get this logged followed by a terse stack trace and systemd-coredump details not included here - full gdb stack trace and more details are further down: Mar 12 10:32:26 goffin dovecot[8269]: imap-login: Login: user=<patman>, method=PLAIN, rip=192.168.1.4, lip=192.168.1.1, mpid=8477, TLS, session=<5RvGYLf2RrDAqAEE> Mar 12 10:32:26 goffin audit[8304]: USER_AUTH pid=8304 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='op=PAM:authentication grantors=pam_usertype,pam_localuser,pam_unix acct="patman" exe="/usr/libexec/dovecot/auth" hostname=192.168.1.4 addr=192.168.1.4 terminal=dovecot res=success' Mar 12 10:32:26 goffin audit[8304]: USER_ACCT pid=8304 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='op=PAM:accounting grantors=pam_unix,pam_localuser acct="patman" exe="/usr/libexec/dovecot/auth" hostname=192.168.1.4 addr=192.168.1.4 terminal=dovecot res=success' Mar 12 10:32:26 goffin dovecot[8269]: imap-login: Login: user=<patman>, method=PLAIN, rip=192.168.1.4, lip=192.168.1.1, mpid=8479, TLS, session=<PnHKYLf2SrDAqAEE> Mar 12 10:32:27 goffin dovecot[8269]: imap(patman)<8452><r+ynYLf2PrDAqAEE>: Panic: file istream-header-filter.c: line 663 (i_stream_header_filter_snapshot_free): assertion failed: (snapshot->mstream->snapshot_pending) Mar 12 10:32:27 goffin audit[8452]: ANOM_ABEND auid=4294967295 uid=1000 gid=1000 ses=4294967295 subj=kernel pid=8452 comm="imap" exe="/usr/libexec/dovecot/imap" sig=6 res=1 email client is fairemail version 1.2042a on android, but an older version had the same problem. I mainly use fairemail to read emails on my phone, and that is working fine but I noticed that deleted emails were not actually getting deleted, that it has a bunch of "pending operations" it has were not running, and that dovecot has been crashing like this since about feb 2 (over a month ago). I can't figure out what changed at that time, but my cert says it should have expired over a year ago, but the cert as created 26 months ago. log files only go back to Feb 5 so just missed that. I generated a new cert but it's still crashing (I probably still need to do something on the client side or my setup is broken). I assume there is something wrong or some "snapshot" thing that's stuck, but since it's crashing I can't figure out what the undelysing problem is. Thanks for any help. More details: -------------------------------------------------------------------------------- # dovecot --version 2.3.20 (80a5ac675d) Running with up to date fedora core 37. -------------------------------------------------------------------------------- # dovecot -n # 2.3.20 (80a5ac675d): /etc/dovecot/dovecot.conf # OS: Linux 6.1.15-200.fc37.x86_64 x86_64 Fedora release 37 (Thirty Seven) # Hostname: specu mail_location = mbox:~/Mail:INBOX=~/Mail/inbox mbox_write_locks = fcntl namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { driver = pam } ssl = required ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_cipher_list = PROFILE=SYSTEM ssl_key = # hidden, use -P to show it userdb { driver = passwd } -------------------------------------------------------------------------------- gdb backtrace via coredumpctl debug PID: Core was generated by `dovecot/imap'. Program terminated with signal SIGABRT, Aborted. --Type <RET> for more, q to quit, c to continue without paging-- #0 __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6, no_tid=no_tid@entry=0) at pthread_kill.c:44 44 return INTERNAL_SYSCALL_ERROR_P (ret) ? INTERNAL_SYSCALL_ERRNO (ret) : 0; (gdb) bt #0 __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6, no_tid=no_tid@entry=0) at pthread_kill.c:44 #1 0x00007fa3840afec3 in __pthread_kill_internal (signo=6, threadid=<optimized out>) at pthread_kill.c:78 #2 0x00007fa38405fa76 in __GI_raise (sig=sig@entry=6) at ../sysdeps/posix/raise.c:26 #3 0x00007fa3840497fc in __GI_abort () at abort.c:79 #4 0x00007fa3847541e3 in default_fatal_finish (status=0, type=LOG_TYPE_PANIC) at ../lib/failures.c:465 #5 fatal_handler_real (ctx=<optimized out>, format=<optimized out>, args=<optimized out>) at ../lib/failures.c:477 #6 0x00007fa3847ff5f7 in i_internal_fatal_handler (ctx=<optimized out>, format=<optimized out>, args=<optimized out>) at ../lib/failures.c:879 #7 0x00007fa3847540e1 in i_panic (format=0x7fa384844040 "file %s: line %d (%s): assertion failed: (%s)") at ../lib/failures.c:530 #8 0x00007fa38474fdf8 in i_stream_header_filter_snapshot_free (_snapshot=<optimized out>) at ../lib-mail/istream-header-filter.c:663 #9 i_stream_header_filter_snapshot_free (_snapshot=0x56150ea92250) at ../lib-mail/istream-header-filter.c:655 #10 0x00007fa38480cb6c in i_stream_snapshot_free (_snapshot=_snapshot@entry=0x56150ea9d2a0) at ../lib/istream.c:253 #11 0x00007fa38480cc14 in i_stream_unref (stream=0x56150ea9d338) at ../lib/istream.c:66 #12 0x00007fa3847dd179 in message_parse_header_deinit (_ctx=_ctx@entry=0x56150ea9d0c8) at ../lib-mail/message-header-parser.c:52 #13 0x00007fa3847deea1 in preparsed_parse_next_header (ctx=0x56150ea9d050, block_r=0x7ffc8222ca70) at ../lib-mail/message-parser-from-parts.c:310 #14 0x00007fa3847dfedc in message_parser_parse_next_block (ctx=ctx@entry=0x56150ea9d050, block_r=block_r@entry=0x7ffc8222ca70) at ../lib-mail/message-parser.c:838 #15 0x00007fa3847e0029 in message_parser_parse_header (ctx=0x56150ea9d050, hdr_size=hdr_size@entry=0x56150ea5ff00, callback=callback@entry=0x7fa3849aa3f0 <index_mail_parse_part_header_cb>, context=context@entry=0x56150ea5fc78) at ../lib-mail/message-parser.c:877 #16 0x00007fa3849aa60a in index_mail_parse_headers_internal (mail=mail@entry=0x56150ea5fc78, headers=headers@entry=0x0) at index/index-mail-headers.c:465 #17 0x00007fa3849aa71e in index_mail_parse_headers (mail=0x56150ea5fc78, headers=0x0, reason=<optimized out>) at index/index-mail-headers.c:499 #18 0x00007fa3849b021e in index_mail_parse_bodystructure_full (mail=0x56150ea5fc78, field=MAIL_CACHE_IMAP_BODYSTRUCTURE) at index/index-mail.c:1491 #19 0x00007fa3849b02b3 in index_mail_parse_bodystructure (mail=mail@entry=0x56150ea5fc78, field=field@entry=MAIL_CACHE_IMAP_BODYSTRUCTURE) at index/index-mail.c:1515 #20 0x00007fa3849b06cd in index_mail_get_special (_mail=0x56150ea5fc78, field=<optimized out>, value_r=0x7ffc8222cbe0) at index/index-mail.c:1713 #21 0x00007fa38492fa1e in mail_get_special (mail=<optimized out>, field=field@entry=MAIL_FETCH_IMAP_BODYSTRUCTURE, value_r=value_r@entry=0x7ffc8222cbe0) at /usr/src/debug/dovecot-2.3.20-1.fc37.x86_64/src/lib-storage/mail.c:418 #22 0x000056150dcf458c in fetch_bodystructure (ctx=0x56150ea57530, mail=<optimized out>, context=<optimized out>) at /usr/src/debug/dovecot-2.3.20-1.fc37.x86_64/src/imap/imap-fetch.c:740 #23 0x000056150dcfa3f3 in imap_fetch_more_int (ctx=ctx@entry=0x56150ea57530, cancel=false) at /usr/src/debug/dovecot-2.3.20-1.fc37.x86_64/src/imap/imap-fetch.c:562 #24 0x000056150dcfa6cd in imap_fetch_more (ctx=0x56150ea57530, cmd=0x56150ea57368) at /usr/src/debug/dovecot-2.3.20-1.fc37.x86_64/src/imap/imap-fetch.c:617 #25 0x000056150dceed11 in cmd_fetch (cmd=0x56150ea57368) at /usr/src/debug/dovecot-2.3.20-1.fc37.x86_64/src/imap/cmd-fetch.c:382 #26 0x000056150dcf79a5 in command_exec (cmd=cmd@entry=0x56150ea57368) at /usr/src/debug/dovecot-2.3.20-1.fc37.x86_64/src/imap/imap-commands.c:201 #27 0x000056150dcfd712 in client_command_input (cmd=<optimized out>, cmd@entry=0x56150ea57368) at /usr/src/debug/dovecot-2.3.20-1.fc37.x86_64/src/imap/imap-client.c:1232 #28 0x000056150dcfd7b8 in client_command_input (cmd=<optimized out>) at /usr/src/debug/dovecot-2.3.20-1.fc37.x86_64/src/imap/imap-client.c:1302 #29 0x000056150dcfdc05 in client_handle_next_command (remove_io_r=<synthetic pointer>, client=0x56150ea567f8) at /usr/src/debug/dovecot-2.3.20-1.fc37.x86_64/src/imap/imap-client.c:1344 #30 client_handle_input (client=client@entry=0x56150ea567f8) at /usr/src/debug/dovecot-2.3.20-1.fc37.x86_64/src/imap/imap-client.c:1358 #31 0x000056150dcfdfd4 in client_input (client=0x56150ea567f8) at /usr/src/debug/dovecot-2.3.20-1.fc37.x86_64/src/imap/imap-client.c:1402 #32 0x00007fa3848183ad in io_loop_call_io (io=0x56150ea890b0) at ../lib/ioloop.c:737 #33 0x00007fa38481973a in io_loop_handler_run_internal (ioloop=ioloop@entry=0x56150ea2def0) at ../lib/ioloop-epoll.c:222 #34 0x00007fa3848197e4 in io_loop_handler_run (ioloop=ioloop@entry=0x56150ea2def0) at ../lib/ioloop.c:789 #35 0x00007fa3848199a0 in io_loop_run (ioloop=0x56150ea2def0) at ../lib/ioloop.c:762 #36 0x00007fa384788bf7 in master_service_run (service=0x56150ea2dd40, callback=callback@entry=0x56150dd00ae0 <client_connected>) at ../lib-master/master-service.c:869 #37 0x000056150dce9c4d in main (argc=<optimized out>, argv=<optimized out>) at /usr/src/debug/dovecot-2.3.20-1.fc37.x86_64/src/imap/main.c:566 (gdb)

3 6

Option to disable client-initiated renegotiation
by Serg 13 Mar '23

13 Mar '23

Hello, is there any way to disallow client-initiated renegotiation at the dovecot? I haven't found any mention of this feature within source code as well as at the documentation. I am asking about it because without this feature mail server is vulnerable to a TLS renegotiation DoS attack which can consume a lot of CPU and is harder to combat comparing to a basic TLS connections flood.

2 1

bug: usersfile very weird behaviour regarding path to mbox
by Mikel Pérez 13 Mar '23

13 Mar '23

dovecot --version 2.3.20 (80a5ac675d) having the following setup: (1) aioria:/srv/franper/mail # cat /etc/dovecot/users ***snip*** ventas-respaldo@franper.net:*snip*:1001:1000::/srv/franper/mail/ventas (2) aioria:/srv/franper/mail # ls -lha total 0 drwxr-x---. 1 1001 1000 238 Mar 13 05:07 . drwxr-sr-x. 1 1000 1001 62 Oct 24 21:29 .. ***snip*** drwxr-x---. 1 1001 1000 578 Mar 4 18:53 ventas drwx------. 1 1001 1000 246 Mar 13 05:07 ventas-respaldo (3) aioria:/srv/franper/mail # date -u Mon Mar 13 05:09:06 UTC 2023 where (1) I'm trying to expose the contents of the mbox ventas as ventas-respaldo(a)franper.net, well, for some reason it disregards that I'm pointing at /srv/franper/mail/ventas BUT does take the directory path at /srv/franper/mail and then constructs a /srv/franper/mail/ventas-respaldo path, which you can confirm with (2) showing ventas-respaldo modification date being today's date (3) because a client (Thunderbird 103 if you're interested but I think that it's not its fault at all) tried accessing ventas-respaldo(a)franper.net which should have pointed to /srv/franper/mail/ventas but instead did this very weird thing. Nowhere in /etc/dovecot/users do I have a line pointing to /srv/franper/mail/ventas-respaldo. dovecut just generates it somehow. dovecot -n: # 2.3.20 (80a5ac675d): /etc/dovecot/dovecot.conf # Pigeonhole version 0.5.20 (149edcf2) # OS: Linux 6.2.1-1-default x86_64 ## (OpenSUSE micro OS) # Hostname: aioria disable_plaintext_auth = no mail_location = maildir:/srv/franper/mail/%n managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables b ody enotify environment mailbox date index ihave duplicate mime foreverypart extracttext namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { args = scheme=CRYPT username_format=%u /etc/dovecot/users driver = passwd-file } plugin { sieve = file:~/sieve;active=~/.dovecot.sieve } ssl = required ssl_cert = <*snip* ssl_cipher_list = ALL:!DH:!kRSA:!SRP:!kDHd:!DSS:!aNULL:!eNULL:!EXPORT:!DES:!3DES:!MD5:!PSK:!RC4:!ADH:!LOW@STRENGTH ssl_key = # hidden, use -P to show it ssl_options = no_compression ssl_prefer_server_ciphers = yes userdb { args = username_format=%u /etc/dovecot/users driver = passwd-file } tell me if you need the sysreport tar and big thanks

1 0

set imap flags in user sieve scripts
by spi 11 Mar '23

11 Mar '23

Hi all Could anyone lead me into the right direction please? I use 'addflag ...' or 'fileinto :flags ...' in global sieve scripts to flag and sort incoming mail - that works. Trying to do that with custom user scripts doesn't work - I get the error that imap4flags only can be used in global scripts. Is there any way to get incoming mails labled and sorted by user sieve scripts? So something like this for a particular user doesn't work: if address :domain "From" "whatever.com"{ fileinto :flags ["\\todo"] "working/whatever"; } -- Cheers spi

3 4

Inconsistent filtering with debugging
by Christian Wolf 11 Mar '23

11 Mar '23

Hello, I have the problem, that I have a Postfix/Dovecot combination running with Sieve activated. The sieve script is running in general as some messages get filtered and moved to the appropriate folders. Now, I see that for the envelope filter, the behavior differs depending if I am debugging the rules or if the mails are received in a regular way. I have something like this: require "envelope"; # ... if envelope :is "to" "foo(a)subdaomin.example.com" { fileinto "INBOX.bar"; stop; } # ... The thing is if I call sieve-filter on the INBOX, I get the information that the mail is to be moved to the appropriate folder. However during delivery the mail is not moved there. Other rules in the script are working so it is installed in general. Of course, I could send mails to the mail address for testing but I have no clue on where to look for issues, especially as the "main debugging tool" for the rules (sieve-filter) is strangely behaving differently. The reason, I wanted to use the envelope was because the mails are delivered to foo(a)subdomain.example.com. From there, some virtual aliases are forwarded to a cental account bar(a)example.net using postfix virtual aliases. Thus, the Delivered-To header is always showing the value bar(a)example.net which is not suited for filtering. I could filter the Received headers but hoped for a more "high level" solution. Can you give me any advice? Christian

3 3

Winbind auhentication
by Luciano Mannucci 10 Mar '23

10 Mar '23

Helo all! I'm trying to set up a dovecot server so that it authenticates local user via /etc/passwd (I'm on a Freebsd 13.1) and via winbindd for those that it cannot find localy. The samba suite is alive and well, postfix gets happily mail from domain users and saves it with correct name and permissions from the windows domain. If I try to authenticate a domain user via wbinfo it works, with dovecot it doesn't. I guess I'v forgot something in the dovecot config... :) Here is my doveconf -n: # 2.3.20 (80a5ac675d): /usr/local/etc/dovecot/dovecot.conf # Pigeonhole version 0.5.20 (149edcf2) # OS: FreeBSD 13.1-RELEASE-p5 powerpc ufs # Hostname: numeron.mcs.it auth_cache_size = 30 k auth_debug_passwords = yes auth_mechanisms = plain ntlm login auth_use_winbind = yes auth_username_format = %n auth_winbind_helper_path = /usr/local/bin/ntlm_auth default_client_limit = 1128 default_vsz_limit = 712 M disable_plaintext_auth = no first_valid_uid = 0 info_log_path = /var/log/dovecot/logfile.info listen = * lock_method = flock log_path = /var/log/dovecot/logfile login_greeting = Dovecot at Nameron Ready. mail_location = mbox:/var/spool/dovecot/%u:INBOX=/var/mail/%u mail_plugins = fts managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate mime foreverypart extracttext passdb { driver = passwd } protocols = imap pop3 service replication-notify-fifo { name = aggregator } service anvil-auth-penalty { name = anvil } service auth-worker { name = auth-worker } service auth-client { user = root name = auth } service config { name = config } service dict-async { name = dict-async } service dict { name = dict } service login/proxy-notify { name = director } service dns-client { name = dns-client } service doveadm-server { name = doveadm } service imap-hibernate { name = imap-hibernate } service imap { service_count = 0 name = imap-login } service imap-urlauth { name = imap-urlauth-login } service imap-urlauth-worker { name = imap-urlauth-worker } service token-login/imap-urlauth { name = imap-urlauth } service imap-master { name = imap } service indexer-worker { name = indexer-worker } service indexer { name = indexer } service ipc { name = ipc } service lmtp { name = lmtp } service log-errors { name = log } service sieve { name = managesieve-login } service login/sieve { name = managesieve } service old-stats-mail { name = old-stats } service pop3 { process_limit = 255 service_count = 1 name = pop3-login } service login/pop3 { name = pop3 } service replicator-doveadm { name = replicator } service login/stats-writer { unix_listener { group = mail mode = 0666 user = dovecot path = stats-reader } unix_listener { group = mail mode = 0666 user = dovecot path = stats-writer } name = stats } service submission { name = submission-login } service login/submission { name = submission } ssl = no userdb { driver = passwd } protocol pop3 { pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_enable_last = yes pop3_uidl_format = %08Xu%08Xv service replication-notify-fifo { name = aggregator } service anvil-auth-penalty { name = anvil } service auth-worker { name = auth-worker } service auth-client { name = auth } service config { name = config } service dict-async { name = dict-async } service dict { name = dict } service login/proxy-notify { name = director } service dns-client { name = dns-client } service doveadm-server { name = doveadm } service imap-hibernate { name = imap-hibernate } service imap { name = imap-login } service imap-urlauth { name = imap-urlauth-login } service imap-urlauth-worker { name = imap-urlauth-worker } service token-login/imap-urlauth { name = imap-urlauth } service imap-master { name = imap } service indexer-worker { name = indexer-worker } service indexer { name = indexer } service ipc { name = ipc } service lmtp { name = lmtp } service log-errors { name = log } service sieve { name = managesieve-login } service login/sieve { name = managesieve } service old-stats-mail { name = old-stats } service pop3 { name = pop3-login } service login/pop3 { name = pop3 } service replicator-doveadm { name = replicator } service login/stats-writer { name = stats } service submission { name = submission-login } service login/submission { name = submission } } protocol lda { debug_log_path = /var/log/dovecot/lda-debug.log info_log_path = /var/log/dovecot/lda.info log_path = /var/log/dovecot/lda.err mail_debug = yes postmaster_address = l(a)mcs.it service replication-notify-fifo { name = aggregator } service anvil-auth-penalty { name = anvil } service auth-worker { name = auth-worker } service auth-client { name = auth } service config { name = config } service dict-async { name = dict-async } service dict { name = dict } service login/proxy-notify { name = director } service dns-client { name = dns-client } service doveadm-server { name = doveadm } service imap-hibernate { name = imap-hibernate } service imap { name = imap-login } service imap-urlauth { name = imap-urlauth-login } service imap-urlauth-worker { name = imap-urlauth-worker } service token-login/imap-urlauth { name = imap-urlauth } service imap-master { name = imap } service indexer-worker { name = indexer-worker } service indexer { name = indexer } service ipc { name = ipc } service lmtp { name = lmtp } service log-errors { name = log } service sieve { name = managesieve-login } service login/sieve { name = managesieve } service old-stats-mail { name = old-stats } service pop3 { name = pop3-login } service login/pop3 { name = pop3 } service replicator-doveadm { name = replicator } service login/stats-writer { name = stats } service submission { name = submission-login } service login/submission { name = submission } } root@numeron:~# Thanks for any hint, Luciano. -- /"\ /Via A. Salaino, 7 - 20144 Milano (Italy) \ / ASCII RIBBON CAMPAIGN / PHONE : +39 02485781 FAX: +39 0248028247 X AGAINST HTML MAIL / E-MAIL: posthamster(a)sublink.sublink.ORG / \ AND POSTINGS / WWW: http://www.lesassaie.IT/

2 2

NFS and performances
by tomate aceite 10 Mar '23

10 Mar '23

Thanks!!!!

1 0

how to setup timestamp
by tomate aceite 10 Mar '23

10 Mar '23

*Thanks** Alessio Cecchi*

1 0

index locally
by tomate aceite 10 Mar '23

10 Mar '23

Thanks guys for all the help. I will check if i can do a rsync script.

1 0

Backend doesn't support GUIDs
by Jose Celestino 09 Mar '23

09 Mar '23

Hi, Have some old dboxes where doveadm sync fails with "Backend doesn't support GUIDs, sync with header hashes instead". The error is right after reading from the folder dovecot.index.log.2. The dovecot version is 2.3.10. Any fix/workaround for the error?

1 0

how to setup timestamp
by tomate aceite 08 Mar '23

08 Mar '23

Does anyone got any example about how to implement delay_until = timestamp ? I am not sure where i can setup it. Thanks!

2 1

Missing mailboxes after migration from Maildir -> mdbox
by Ansgar 08 Mar '23

08 Mar '23

I migrated from existing dovecot Maildir to dbox. After adding separator to the namespace it migrated all Inbox mails, but the other mailboxes like user-created ones and "Junk", "Sent" and so on has not been migrated. Any advice would be helpful, here is my dovconf: https://pastebin.com/rDSeBcLe My migration I made using: 1. Edit dovecot.conf with new mdbox and adding separator 2. dsync mirror per user with old maildir:~/mail 3. missing mailboxes: tried with doveadm sync also with -f mode and specified mailboxes. No luck. dsync -v -u admin(a)sajdowski.de mirror maildir:~/mail mail_home = /var/vmail/mailboxes/%d/%n #mail_location = maildir:~/mail:LAYOUT=fs mail_location=mdbox:~/mdbox My directorys: root@mail:/var/vmail/mailboxes/example.de/admin# ls -l insgesamt 56 drwxrwx--- 2 vmail vmail 4096 8. Mär 01:14 cur -rw-rw---- 1 vmail vmail 160 8. Mär 01:14 dovecot.index.log -rw-rw---- 1 vmail vmail 3712 8. Mär 01:14 dovecot.list.index.log -rw-rw---- 1 vmail vmail 96 8. Mär 01:14 dovecot.mailbox.log -rw-rw---- 1 vmail vmail 51 8. Mär 01:14 dovecot-uidlist -rw-rw---- 1 vmail vmail 8 8. Mär 01:14 dovecot-uidvalidity -r--r--r-- 1 vmail vmail 0 8. Mär 00:57 dovecot-uidvalidity.6407cf6d drwxrwx--- 20 vmail vmail 4096 8. Mär 02:51 mail drwx------ 7 vmail vmail 4096 8. Mär 13:52 mailboxes drwx------ 13 vmail vmail 4096 8. Mär 02:36 Maildir drwx------ 5 vmail vmail 4096 8. Mär 04:20 mdbox drwxrwx--- 2 vmail vmail 4096 8. Mär 01:14 new -rw-rw---- 1 vmail vmail 28 8. Mär 01:14 subscriptions drwxrwx--- 2 vmail vmail 4096 8. Mär 01:14 tmp drwxrwx--- 2 vmail vmail 4096 8. Mär 00:57 xapian-indexes root@mail:/var/vmail/mailboxes/example.de/admin/mail# ls -l insgesamt 87576 drwxrwx--- 2 vmail vmail 9113600 8. Mär 02:20 cur -rw-rw---- 1 vmail vmail 1602296 8. Mär 02:20 dovecot.index -rw-rw---- 1 vmail vmail 73030876 8. Mär 02:41 dovecot.index.cache -rw-rw---- 1 vmail vmail 441656 8. Mär 02:39 dovecot.index.log -rw-rw---- 1 vmail vmail 83568 8. Mär 02:20 dovecot.index.log.2 -rwxrwx--- 1 vmail vmail 206490 17. Jun 2019 dovecot.index.thread -rwxrwx--- 1 vmail vmail 51 2. Aug 2019 dovecot-keywords -rw-rw---- 1 vmail vmail 1392 8. Mär 01:25 dovecot.list.index -rw-rw---- 1 vmail vmail 6712 8. Mär 02:41 dovecot.list.index.log -rwxrwx--- 1 vmail vmail 1464 8. Mär 02:20 dovecot.mailbox.log -rw-rw---- 1 vmail vmail 4875528 8. Mär 02:20 dovecot-uidlist -rwxrwx--- 1 vmail vmail 8 8. Mär 01:25 dovecot-uidvalidity -rwxrwx--- 1 vmail vmail 0 17. Jun 2019 dovecot-uidvalidity.5a6912f0 drwxrwx--- 5 vmail vmail 4096 7. Mär 20:14 Drafts -rw-rw---- 1 vmail vmail 49 6. Mär 11:10 maildirsize drwxrwx--- 5 vmail vmail 4096 7. Mär 20:44 'Mailling Listen' drwxrwx--- 2 vmail vmail 204800 8. Mär 00:04 new drwxrwx--- 5 vmail vmail 4096 7. Mär 20:14 Sent drwxrwx--- 5 vmail vmail 4096 7. Mär 20:44 Spam drwxrwx--- 5 vmail vmail 4096 26. Feb 19:44 'SPF Fail' -rw-rw---- 1 vmail vmail 23 8. Mär 02:20 subscriptions drwxrwx--- 2 vmail vmail 4096 8. Mär 02:20 tmp drwxrwx--- 5 vmail vmail 4096 26. Feb 19:12 Trash drwxrwx--- 5 vmail vmail 4096 7. Mär 22:30 ubb drwxrwx--- 10 vmail vmail 4096 27. Feb 18:44 xapian-indexes

1 0

index locally
by tomate aceite 08 Mar '23

08 Mar '23

Hello, Do you know if is possible to store indexes locally instead of NFS in dovecot 2.2.7 ? Thanks.

3 2

Dovecot "Mailbox sharing between users".
by Jobst Schmalenbach 07 Mar '23

07 Mar '23

Hi I have appended the important bits of my server configuration to the end of this email I am trying to get "Mailbox sharing between users" to work. For starters it is very hard to follow the doc only https://doc.dovecot.org/configuration_manual/shared_mailboxes/shared_mailbo… without an actual example. I tried to use this (sorry in German) https://dokuwiki.tachtler.net/doku.php?id=tachtler:dovecot_shares and this got me a little further down the track. I followed the instructions required for the dovecot config files. Restarted dovecot, not errors displayed in the logs. I have got access to two user accounts, say USER1 and USER2. I executed this lines doveadm acl set -u USER1 INBOX user=USER2 admin create delete expunge insert lookup post read write write-deleted write-seen doveadm acl set -u USER2 INBOX user=USER1 admin create delete expunge insert lookup post read write write-deleted write-seen and created (just to be sure) two folders for each user /home/USER1/Mail/shared/USER1 /home/USER1/Mail/shared/USER2 /home/USER2/Mail/shared/USER1 /home/USER2/Mail/shared/USER2 The tried to create a mailboxes like so /home/USER1/Mail/shared/USER1/testa /home/USER1/Mail/shared/USER2/testb /home/USER2/Mail/shared/USER1/testa /home/USER2/Mail/shared/USER2/testb They are not created and no error is displayed - even looking at the dovecot logs. What I see in the folders for BOTH users though (for every folder) dovecot.list.index.log On the command line I can see the .imap files and do a 'ls -alR' in the folders, but no created mbox. I can definitely see the folders, but I cannot create a mbox file. What am I doing wrong? Help please. --------------------------------------------------------------------------------------------------------------------------------------------------------------- Here are the important configuration items # 2.3.16 (7e2e900c1a): /etc/dovecot/dovecot.conf # OS: Linux 4.18.0-425.13.1.el8_7.x86_64 x86_64 AlmaLinux release 8.7 (Stone Smilodon) xfs namespace shared { list = children location = maildir:~/Mail/:INDEX=~/Mail/shared/%%u:CONTROL=~/Mail/shared/ prefix = shared/%%u/ separator = / subscriptions = yes type = shared } mail_location = mbox:/home/%u/Mail/:INBOX=/var/mail/%u mail_plugins = acl passdb { driver = pam } plugin { acl = vfile acl_shared_dict = file:/var/lib/dovecot/db/shared-mailboxes.db } service auth { unix_listener auth-userdb { group = dovecot mode = 0777 user = dovecot } } protocol imap { mail_plugins = " acl imap_acl" } --

1 0

Flags/tags lost when moving e-mails to another folder
by Alexis Ben Miloud--Josselin 06 Mar '23

06 Mar '23

Hi, I have an issue with e-mail tags/flags. The IMAP user is using Thunderbird or Roundcube with Thunderbird tags. When the user (with an IMAP client) moves an e-mail from a folder to another, tags set on the e-mail are lost. When we check the filesystem, we can see the "a" tag: -rw-rw---- 2 test mailusers 2498 Dec 29 15:31 'cur/1676643827.M563793P15241.<HOSTNAME>,S=2498,W=2551:2,a' When we move the e-mail to another folder, the tag disappear: -rw-rw---- 2 test mailusers 2498 Dec 29 15:31 '.test/cur/1676644340.M214404P22014.<HOSTNAME>,S=2498,W=2551:2,' In both folders, the dovecot-keywords file is: 0 $LABEL1 The problem appeared after a major system upgrade (Debian 9 to 10). Dovecot version went from 2.2.27 to 2.3.4.1. Some system informations: # dovecot --version 2.3.4.1 (f79e8e7e4) # cat /etc/debian_version 10.13 # uname -a Linux <HOSTNAME> 4.19.0-23-amd64 #1 SMP Debian 4.19.269-1 (2022-12-20) x86_64 GNU/Linux # findmnt /var TARGET SOURCE FSTYPE OPTIONS /var /dev/vda3 ext4 rw,nosuid,relatime # findmnt /home TARGET SOURCE FSTYPE OPTIONS /home /dev/vdb ext4 rw,nosuid,nodev,noexec,relatime The output of `dovecot -n output` is here (link expires in one year): https://paste.evolix.org/?96d46acaea638568#56g7AQLuzJxxy4xintpexJCPgiAAG23c… Here are the operations I see on an e-mail file using strace: 15507 link("/home/test/Maildir/cur/1672326270.M619318P11927.<HOSTNAME>,S=2498,W=2551:2,Sa", "/home/test/Maildir/.test/tmp/1672326456.M737812P15507.<HOSTNAME>") = 0 15507 rename("/home/test/Maildir/.test/tmp/1672326456.M737812P15507.<HOSTNAME>", "/home/test/Maildir/.test/cur/1672326456.M737813P15507.<HOSTNAME>,S=2498,W=2551:2,S") = 0 15507 unlink("/home/test/Maildir/cur/1672326270.M619318P11927.<HOSTNAME>,S=2498,W=2551:2,Sa") = 0 Setting mbox_lazy_writes to yes and/or unsetting mail_cache_fields doesn't change anything. Any idea of what I am missing? Could this be a bug in Dovecot? Thanks in advance, -- Alexis Ben Miloud--Josselin <abenmiloud(a)evolix.fr> Evolix - Hébergement et Infogérance Open Source Marseille (37 rue Guibal, Pôle Média, 13003) / Paris / Montréal http://evolix.com | Twitter: @Evolix @EvolixNOC | http://blog.evolix.com

2 2

Re: Corrupted sizes using zlib plugin
by Tim Evers 06 Mar '23

06 Mar '23

Am 06.03.23 um 11:42 schrieb Aki Tuomi: >> On 06/03/2023 12:32 EET Tim Evers <te-ml-ext(a)artfiles.de> wrote: >> >> >> Hi, >> >> since I did not get any feedback on my bug report post regarding >> corrupted sizes while using zlib >> (https://dovecot.org/pipermail/dovecot/2023-February/126105.html) I >> would like to confirm that this bug report reached someone in charge. >> >> Or if not - I would kindly ask for directions on how to post it in a way >> that spawns some action. >> >> Thx >> >> Tim > Can you try erasing dovecot.index.cache and see if the problem fixes itself? It's possible your cache contains invalid values from old errors. > > Aki Did that already several times (other dovecot.index.* files too). The only thing that helps is actually deleting the dovecot-uidlist file but the problem returns. Tim

2 3

Corrupted sizes using zlib plugin
by Tim Evers 06 Mar '23

06 Mar '23

Hi, since I did not get any feedback on my bug report post regarding corrupted sizes while using zlib (https://dovecot.org/pipermail/dovecot/2023-February/126105.html) I would like to confirm that this bug report reached someone in charge. Or if not - I would kindly ask for directions on how to post it in a way that spawns some action. Thx Tim

2 1

Setting up the mail-crypt plugin with virtual accounts that have no home directories
by Jeremy 05 Mar '23

05 Mar '23

Hi again, I am using dovecot 2.3.16, along with postfix and a PostgreSQL database for managing virtual accounts. After an initial topic from me about encrypting already existent mail, I could now use some pointers on how to set up the mail-crypt plugin for pure virtual accounts (i.e. that have no matching system users and/or home directories. I hope somebody can clarify a few things that are not entirely clear to me yet. After doing my own research, I believe the following should be possible: I'd like to use the password of virtual email accounts to let dovecot encrypt/decrypt the keys needed to encrypt/decrypt the mail in the relevant folders. As per the documentation @ https://doc.dovecot.org/configuration_manual/mail_crypt_plugin/ I believe this would be all the configuration I need: # Config mail_attribute_dict = file:%h/Maildir/dovecot-attributes mail_plugins = $mail_plugins mail_crypt plugin { mail_crypt_curve = secp521r1 # or some other preferred curve mail_crypt_save_version = 2 mail_crypt_require_encrypted_user_key = yes # necessary for encrypting keys with user password } # File: /etc/dovecot/dovecot-sql.conf.ext password_query = SELECT \ email as user, password, \ '%w' AS userdb_mail_crypt_private_password \ FROM virtual_users WHERE email='%u'; My first question is: Is it possible to configure mail_attribute_dict in such a way as to not use home directories. Since I only use virtual accounts, without those accounts having home directories, can I somehow tell dovecot to save the attributes into the PostsreSQL database, for instance? If not, can you suggest another approach, without having to create home directories for virtual users? My second question is: The documentation warns about not using password directly in the above SQL query: > Choosing encryption key > DO NOT use password directly. It can contain % which is interpreted as > variable expansion and can cause errors. Does this refer to not accidentally substituting '%w' with password? In other words, if I leave the above query as is, should I be good, even if plain text passwords of users potentially have % signs in them? Or would I need to take further measurements? (The passwords in my database are already hashed, by the way). I hope somebody can offer some guidance on this. Thanks.

2 7

bug report: imap-login not killed
by Sacha 05 Mar '23

05 Mar '23

Hi, We have growing imap-login processes until we reach the max processes. This occurs when a particular user have a login error due to our LDAP misconfiguration: --- Mar 4 14:59:33 hera dovecot[2226963]: auth: Error: plain(john.doe,XX.XX.XX.XX,<13C0eBP2354lqXpO>): user not found from any userdbs Mar 4 14:59:33 hera dovecot[2226963]: imap: Error: auth-master: login: request [1001652225]: Login auth request failed: Authenticated user not found from userdb, auth lookup id=1001652225 (auth connected 2 msecs ago, request took 1 msecs, client-pid=2235348 client-id=1) Mar 4 14:59:33 hera dovecot[2226963]: imap-login: Internal login failure (pid=2235348 id=1): user=<ohn.doe>, method=PLAIN, rip=XX.XX.XX.XX, lip=18 5.233.100.1, mpid=2235359, TLS, session=<13C0eBP2354lqXpO> --- The origin of is issue is when passdb finds the user and userdb not. The result is imap-login processes with no timeout growing until we reach the max processes. * OS version Debian stable - Bullseye * Dovecot version dpkg -l |grep dovecot ii dovecot-antispam 2.0+20171229-1+b7 amd64 Dovecot plugins for training spam filters ii dovecot-common 1:2.1.7-7+deb7u1 all Transitional package for dovecot ii dovecot-core 1:2.3.13+dfsg1-2+deb11u1 amd64 secure POP3/IMAP server - core files ii dovecot-core-dbgsym 1:2.3.13+dfsg1-2+deb11u1 amd64 debug symbols for dovecot-core ii dovecot-imapd 1:2.3.13+dfsg1-2+deb11u1 amd64 secure POP3/IMAP server - IMAP daemon ii dovecot-imapd-dbgsym 1:2.3.13+dfsg1-2+deb11u1 amd64 debug symbols for dovecot-imapd ii dovecot-ldap 1:2.3.13+dfsg1-2+deb11u1 amd64 secure POP3/IMAP server - LDAP support ii dovecot-managesieved 1:2.3.13+dfsg1-2+deb11u1 amd64 secure POP3/IMAP server - ManageSieve server ii dovecot-mysql 1:2.3.13+dfsg1-2+deb11u1 amd64 secure POP3/IMAP server - MySQL support ii dovecot-pop3d 1:2.3.13+dfsg1-2+deb11u1 amd64 secure POP3/IMAP server - POP3 daemon ii dovecot-sieve 1:2.3.13+dfsg1-2+deb11u1 amd64 secure POP3/IMAP server - Sieve filters support * doveconf -n --- # 2.3.13 (89f716dc2): /etc/dovecot/dovecot.conf # Pigeonhole version 0.5.13 (cdd19fe3) doveconf: Warning: service auth { client_limit=1000 } is lower than required under max. load (4096) doveconf: Warning: service anvil { client_limit=1000 } is lower than required under max. load (4099) # OS: Linux 5.10.0-21-cloud-amd64 x86_64 Debian 11.6 ext4 # Hostname: XXX auth_mechanisms = plain login default_process_limit = 1024 first_valid_gid = 8 first_valid_uid = 109 last_valid_gid = 8 last_valid_uid = 109 login_greeting = XXX listening. mail_access_groups = mail mail_gid = 8 mail_location = maildir:/srv/vmail/%d/%n mail_privileged_group = mail mail_uid = 109 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy i nclude variables body enotify environment mailbox date index ihave duplicate mime foreverypart extracttext imapflags notify imapsieve vnd.dovecot.imapsieve vnd.dovecot.filter namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { args = /etc/dovecot/dovecot-ldap.conf driver = ldap } passdb { args = /etc/dovecot/dovecot-ldap-girondix.conf driver = ldap } passdb { args = /etc/dovecot/dovecot-oauth2.conf.ext driver = oauth2 mechanisms = xoauth2 oauthbearer } plugin { quota_rule = *:storage=100M quota_rule2 = Trash:storage=10%% recipient_delimiter = + sieve = /srv/vmail/%d/%n/dovecot.sieve sieve_default = /var/lib/dovecot/sieve/default.sieve sieve_dir = /srv/vmail/%d/%n/sieve sieve_extensions = +notify +imapflags +vnd.dovecot.filter sieve_filter_bin_dir = /usr/lib/dovecot/sieve-filter sieve_global_extensions = +vnd.dovecot.pipe sieve_max_script_size = 1M sieve_pipe_bin_dir = /etc/dovecot/sieve sieve_pipe_socket_dir = sieve-pipe sieve_plugins = sieve_imapsieve sieve_extprograms sieve_redirect_envelope_from = orig_recipient } protocols = imap pop3 sieve service auth { unix_listener /var/spool/postfix/private/auth { group = mail mode = 0600 user = postfix } unix_listener auth-master { group = mail mode = 0660 user = vmail } unix_listener auth-userdb { group = mail mode = 0600 user = vmail } } service imap-login { inet_listener imap { port = 0 } } service imap { vsz_limit = 1 G } service lmtp { executable = lmtp -L process_min_avail = 2 } service pop3-login { inet_listener pop3 { port = 0 } } ssl_cert = </srv/letsencrypt/pem/mail.aquilenet.fr.pem ssl_client_ca_dir = /etc/ssl/certs ssl_dh = # hidden, use -P to show it ssl_key = # hidden, use -P to show it userdb { args = /etc/dovecot/dovecot-ldap.conf driver = ldap } userdb { args = /etc/dovecot/dovecot-ldap-girondix.conf driver = ldap } protocol lmtp { auth_username_format = %n info_log_path = /var/log/dovecot-lmtp.log mail_plugins = " sieve" } protocol lda { mail_plugins = " mailbox_alias sieve" } protocol imap { imap_client_workarounds = delay-newmail tb-extra-mailbox-sep imap_idle_notify_interval = 30 secs mail_max_userip_connections = 50 mail_plugins = quota mailbox_alias imap_quota } protocol pop3 { mail_plugins = quota mailbox_alias acl pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } ---

2 2

Multiple scripts with postlogin
by Dan Conway 03 Mar '23

03 Mar '23

Hello, I'm having trouble understanding how to execute separate scripts with postlogin. According to the documentation, it should be as simple as: You can run multiple post-login scripts by just giving multiple scripts as parameters to|script-login|, for example: executable = script-login rawlog /usr/local/bin/postlogin.sh /usr/local/bin/postlogin2.sh Given this information, I supplied two scripts to service imap-postlogin below: service imap { executable = imap imap-postlogin } service imap-postlogin { executable = script-login -d rawlog /usr/local/bin/postlogin.pl /usr/local/bin/postlogin2.pl user = $default_internal_user unix_listener imap-postlogin { } } Both scripts simply print "Script 1" and "Script 2" to STDERR. Here is what they look like: #!/usr/bin/perl use strict; use warnings; print STDERR "Script 1\n"; system("/usr/lib/dovecot/script-login"); After logging in, only the first script is executed. The second one is ignored. I tried not executing "/usr/lib/dovecot/script-login" in the first script, in hopes that it would execute the second script, but it only denies the connection after printing "Script 1" imap-postlogin: Error: Script 1 imap(<user>): Error: Post-login script denied access to user <user> Am I missing something? Thanks.

2 1

OAuth2: local validation with RFC9068 tokens
by Tomas Habarta 01 Mar '23

01 Mar '23

Hello, my IdP is kind of progressive and implemented RFC9068, where all access tokens now come with typ "at+JWT". Since the setup has used local validation, I had to switch and currently use introspection endpoint. Looked around at the src and there seems to be relatively simple check of the token typ checking the only fixed value of "JWT" -- do you think you could consider tuning it a little bit so that local validation works also with such tokens? I am not an expert on OAuth2 so have no idea whether this is a valid request, but think that such a token is still JWT but has the required structure per RFC, which should not anyhow be in collision with a simple "JWT" typ. Saying that, I would not wonder if the statement is not correct :) Many thanks, Tomas

1 0

Can't receive mail before connecting with mutt and sending mail
by efeizbudak 01 Mar '23

01 Mar '23

Hi everyone, I've recently set up an email server. I also have mail crypt plugin and the users are set up through pam. The problem is that whenever I set up a new user, it can send mail but not receive it until the account is connected with mutt and at least one mail is sent. I've noticed that the mail_attribute_dict file is also not set up before doing this. One peculiar thing about all this is that if an account is connected through the stock android email app, the same "send email to get email" trick does not work. How can I debug this? Thank you! -- All the best, Efe The funny quote of this email is trivial and left as an exercise.

1 0

"sh: doveadm: command not found" with doveadm -Dv backup -R
by James Brown 01 Mar '23

01 Mar '23

I’m moving from an old mail server to a new one. On the new one, trying to transfer mailboxes from the old machine using doveadm. It fails saying it can’f find doveadm: % sudo doveadm -Dv backup -R -u myuser(a)bordo.com.au remote:mail.bordo.com.au Password: Debug: Loading modules from directory: /usr/local/lib/dovecot/doveadm Debug: Skipping module doveadm_acl_plugin, because dlopen() failed: dlopen(/usr/local/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so, 0x000A): symbol not found in flat namespace '_acl_backend_nonowner_lookups_iter_deinit' (this is usually intentional, so just ignore this message) Debug: Skipping module doveadm_quota_plugin, because dlopen() failed: dlopen(/usr/local/lib/dovecot/doveadm/lib10_doveadm_quota_plugin.so, 0x000A): symbol not found in flat namespace '_quota_get_resource' (this is usually intentional, so just ignore this message) Debug: Skipping module doveadm_fts_plugin, because dlopen() failed: dlopen(/usr/local/lib/dovecot/doveadm/lib20_doveadm_fts_plugin.so, 0x000A): symbol not found in flat namespace '_fts_backend_lookup' (this is usually intentional, so just ignore this message) Debug: Skipping module doveadm_mail_crypt_plugin, because dlopen() failed: dlopen(/usr/local/lib/dovecot/doveadm/libdoveadm_mail_crypt_plugin.so, 0x000A): symbol not found in flat namespace '_mail_crypt_acl_secure_sharing_enabled' (this is usually intentional, so just ignore this message) Feb 28 12:42:02 Debug: Loading modules from directory: /usr/local/lib/dovecot/doveadm Feb 28 12:42:02 Debug: Skipping module doveadm_acl_plugin, because dlopen() failed: dlopen(/usr/local/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so, 0x000A): symbol not found in flat namespace '_acl_backend_nonowner_lookups_iter_deinit' (this is usually intentional, so just ignore this message) Feb 28 12:42:02 Debug: Skipping module doveadm_quota_plugin, because dlopen() failed: dlopen(/usr/local/lib/dovecot/doveadm/lib10_doveadm_quota_plugin.so, 0x000A): symbol not found in flat namespace '_quota_get_resource' (this is usually intentional, so just ignore this message) Feb 28 12:42:02 Debug: Skipping module doveadm_fts_plugin, because dlopen() failed: dlopen(/usr/local/lib/dovecot/doveadm/lib20_doveadm_fts_plugin.so, 0x000A): symbol not found in flat namespace '_fts_backend_lookup' (this is usually intentional, so just ignore this message) Feb 28 12:42:02 Debug: Skipping module doveadm_mail_crypt_plugin, because dlopen() failed: dlopen(/usr/local/lib/dovecot/doveadm/libdoveadm_mail_crypt_plugin.so, 0x000A): symbol not found in flat namespace '_mail_crypt_acl_secure_sharing_enabled' (this is usually intentional, so just ignore this message) Feb 28 12:42:02 doveadm(myuser(a)bordo.com.au)<76814><>: Debug: auth-master: userdb lookup(myuser(a)bordo.com.au): Started userdb lookup Feb 28 12:42:02 doveadm(myuser(a)bordo.com.au)<76814><>: Debug: auth-master: conn unix:/usr/local/var/run/dovecot/auth-userdb: Connecting Feb 28 12:42:02 doveadm(myuser(a)bordo.com.au)<76814><>: Debug: auth-master: conn unix:/usr/local/var/run/dovecot/auth-userdb (uid=0): Client connected (fd=9) Feb 28 12:42:02 doveadm(myuser(a)bordo.com.au)<76814><>: Debug: auth-master: userdb lookup(myuser(a)bordo.com.au): auth USER input: myuser(a)bordo.com.au home=/usr/local/virtual/bordo.com.au/myuser mail=maildir:/usr/local/virtual/bordo.com.au/myuser uid=102 gid=102 quota=*:storage=0 Feb 28 12:42:02 doveadm(myuser(a)bordo.com.au)<76814><>: Debug: auth-master: userdb lookup(myuser(a)bordo.com.au): Finished userdb lookup (username=myuser(a)bordo.com.au home=/usr/local/virtual/bordo.com.au/myuser mail=maildir:/usr/local/virtual/bordo.com.au/myuser uid=102 gid=102 quota=*:storage=0) Feb 28 12:42:02 doveadm(myuser(a)bordo.com.au)<76814><>: Debug: Added userdb setting: mail=maildir:/usr/local/virtual/bordo.com.au/myuser Feb 28 12:42:02 doveadm(myuser(a)bordo.com.au)<76814><>: Debug: Added userdb setting: plugin/quota=*:storage=0 Feb 28 12:42:02 doveadm(myuser(a)bordo.com.au): Debug: Effective uid=102, gid=102, home=/usr/local/virtual/bordo.com.au/myuser Feb 28 12:42:02 doveadm(myuser(a)bordo.com.au): Debug: open(/proc/self/stat) failed: No such file or directory Feb 28 12:42:02 doveadm(myuser(a)bordo.com.au): Debug: open(/proc/self/io) failed: No such file or directory Feb 28 12:42:02 doveadm(myuser(a)bordo.com.au): Debug: Namespace inbox: type=private, prefix=, sep=, inbox=yes, hidden=no, list=yes, subscriptions=yes location=maildir:/usr/local/virtual/bordo.com.au/myuser Feb 28 12:42:02 doveadm(myuser(a)bordo.com.au): Debug: maildir++: root=/usr/local/virtual/bordo.com.au/myuser, index=, indexpvt=, control=, inbox=/usr/local/virtual/bordo.com.au/myuser, alt= Feb 28 12:42:02 doveadm(myuser(a)bordo.com.au): Debug: brain M: Namespace has location maildir:/usr/local/virtual/bordo.com.au/myuser Feb 28 12:42:02 doveadm(myuser(a)bordo.com.au): Debug: Mailbox INBOX: Couldn't open mailbox in list index: Mailbox not found Feb 28 12:42:02 doveadm(myuser(a)bordo.com.au): Debug: Namespace : Using permissions from /usr/local/virtual/bordo.com.au/myuser: mode=0700 gid=default (root(a)mail.bordo.com.au) Password: sh: doveadm: command not found Feb 28 12:42:06 dsync-local(myuser(a)bordo.com.au)<SJq/Iepb/WMOLAEAiJz6GQ>: Error: read(mail.bordo.com.au) failed: EOF (version not received) Feb 28 12:42:06 dsync-local(myuser(a)bordo.com.au)<SJq/Iepb/WMOLAEAiJz6GQ>: Error: Remote command returned error 127: ssh mail.bordo.com.au doveadm dsync-server -umyuser(a)bordo.com.au -U Feb 28 12:42:06 dsync-local(myuser(a)bordo.com.au)<SJq/Iepb/WMOLAEAiJz6GQ>: Debug: User session is finished Feb 28 12:42:06 dsync-local(myuser(a)bordo.com.au)<SJq/Iepb/WMOLAEAiJz6GQ>: Debug: auth-master: conn unix:/usr/local/var/run/dovecot/auth-userdb (uid=0): Disconnected: Connection closed (fd=9) Does this mean the remote machine can’t fine doveadm? (Both machines are running macOS) I could probably transfer the mailboxes using rsync, but I thought that doveadm was a better way. Thanks, James.

2 2

Re: Auth variables unknown variable -- about to go crazy
by efeizbudak 28 Feb '23

28 Feb '23

1 0

Auth variables unknown variable -- about to go crazy
by efeizbudak 28 Feb '23

28 Feb '23

Hi everyone, I'm trying to configure my email server to encrypt mails on a per user basis. I have the following in my conf: mail_plugins = $mail_plugins mail_crypt mail_attribute_dict = file:%h/Mail/dovecot-attributes plugin { mail_crypt_curve = secp521r1 mail_crypt_save_version = 2 mail_crypt_require_encrypted_user_key = yes mail_crypt_private_password = %N{password} } And I'm getting %password unknown variable error. I use pam to store the passwords. All I want is to be able to hash the user password and use that to encrypt/decrypt the keys. Can someone _please_ help me? -- All the best, Efe The funny quote of this email is trivial and left as an exercise.

2 1