- dovecot - dovecot.org

[Dovecot] dovecot 1.2 link error
by Axel Schmalowsky 12 Nov '08

12 Nov '08

Hello list, I need/want to build imaptest -- and I can only build it against at least dovecot 1.2 . dovecot 1.2 actually builds just fine but at the end I get the following linker error: /bin/sh ../../libtool --tag=CC --mode=link gcc -std=gnu99 -O2 -pipe -std=gnu99 -Wall -ftree-dce -ftree-dse -ftree-loop-optimize -ftree-loop-linear -I/usr/lib/gcc/i386-redhat-linux/4.1.1/include -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -Wstrict-aliasing=2 -Wl,-z -Wl,compreloc -Wl,-z -Wl,norelro -o imap -export-dynamic cmd-append.o cmd-capability.o cmd-cancelupdate.o cmd-check.o cmd-close.o cmd-copy.o cmd-create.o cmd-delete.o cmd-enable.o cmd-examine.o cmd-expunge.o cmd-fetch.o cmd-id.o cmd-idle.o cmd-list.o cmd-logout.o cmd-lsub.o cmd-namespace.o cmd-noop.o cmd-rename.o cmd-search.o cmd-select.o cmd-sort.o cmd-status.o cmd-store.o cmd-subscribe.o cmd-thread.o cmd-uid.o cmd-unselect.o cmd-unsubscribe.o cmd-x-cancel.o client.o commands.o commands-util.o imap-expunge.o imap-fetch.o imap-fetch-body.o imap-search.o imap-sort.o imap-status.o imap-sync.o mail-storage-callbacks.o main.o ../../src/lib-storage/register/libstorage-register.a ../../src/lib-storage/list/libstorage_list.a ../../src/lib-storage/index/maildir/libstorage_maildir.a ../../src/lib-storage/index/libstorage_index.a ../../src/lib-storage/libstorage.a ../../src/lib-index/libindex.a ../../src/lib-imap/libimap.a ../../src/lib-mail/libmail.a ../../src/lib-auth/libauth.a ../../src/lib-charset/libcharset.a ../../src/lib/liblib.a ../lib-dict/libdict.a ../lib/mountpoint.o -export-dynamic -ldl mkdir .libs gcc -std=gnu99 -O2 -pipe -std=gnu99 -Wall -ftree-dce -ftree-dse -ftree-loop-optimize -ftree-loop-linear -I/usr/lib/gcc/i386-redhat-linux/4.1.1/include -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -Wstrict-aliasing=2 -Wl,-z -Wl,compreloc -Wl,-z -Wl,norelro -o imap cmd-append.o cmd-capability.o cmd-cancelupdate.o cmd-check.o cmd-close.o cmd-copy.o cmd-create.o cmd-delete.o cmd-enable.o cmd-examine.o cmd-expunge.o cmd-fetch.o cmd-id.o cmd-idle.o cmd-list.o cmd-logout.o cmd-lsub.o cmd-namespace.o cmd-noop.o cmd-rename.o cmd-search.o cmd-select.o cmd-sort.o cmd-status.o cmd-store.o cmd-subscribe.o cmd-thread.o cmd-uid.o cmd-unselect.o cmd-unsubscribe.o cmd-x-cancel.o client.o commands.o commands-util.o imap-expunge.o imap-fetch.o imap-fetch-body.o imap-search.o imap-sort.o imap-status.o imap-sync.o mail-storage-callbacks.o main.o ../lib/mountpoint.o -Wl,--export-dynamic ../../src/lib-storage/register/libstorage-register.a ../../src/lib-storage/list/libstorage_list.a ../../src/lib-storage/index/maildir/libstorage_maildir.a ../../src/lib-storage/index/libstorage_index.a ../../src/lib-storage/libstorage.a ../../src/lib-index/libindex.a ../../src/lib-imap/libimap.a ../../src/lib-mail/libmail.a ../../src/lib-auth/libauth.a ../../src/lib-charset/libcharset.a ../../src/lib/liblib.a ../lib-dict/libdict.a -ldl ../../src/lib-storage/register/libstorage-register.a(mailbox-list-register.o): In function `mailbox_list_register_all': mailbox-list-register.c:(.text+0x2d): undefined reference to `shared_mailbox_list' collect2: ld returned 1 exit status make[3]: *** [imap] Error 1 make[3]: Leaving directory `/root/compile/imaptest/current/dovecot-1.2.alpha3/src/imap' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/root/compile/imaptest/current/dovecot-1.2.alpha3/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/root/compile/imaptest/current/dovecot-1.2.alpha3' make: *** [all] Error 2 does anyone have an idea as to how to get rid of it? thanks in advance ;) -- Freundliche Grüße / Kind regards Axel Schmalowsky Platform Engineer ___________________________________ domainfactory GmbH Oskar-Messter-Str. 33 85737 Ismaning Germany Telefon: +49 (0)89 / 55266-356 Telefax: +49 (0)89 / 55266-222 E-Mail: aschmalowsky(a)df.eu Internet: www.df.eu Registergericht: Amtsgericht München HRB 150294, Geschäftsführer Tobias Marburg, Jochen Tuchbreiter

2 2

[Dovecot] Dovecot master process
by Steven F Siirila 12 Nov '08

12 Nov '08

We are running into a situation where Dovecot master is simply trying to do too much. It some situations, we are finding that there are times in which it cannot service requests. Restarting Dovecot seems to help in these situations, possibly due to the fact that it no longer has to manage its THOUSANDS of file descriptors for pipes to the many imap/proxy processes that it uses for logging. Is there a way to turn off logging through the master process (in exchange for lesser security)? If not, would it be easy to have the master process do its logging using separate threads (which would help on some modern hardware)? Finally, would it be easy to delegate the task of logging to a dedicated process? We are still running Dovecot 1.0.0 at this time, on Solaris 10 servers. -- Steven F. Siirila Office: WBOB, 621F Internet Services E-mail: sfs(a)umn.edu Office of Information Technology Voice: (612) 626-0244 University of Minnesota Fax: (612) 626-7593

3 2

[Dovecot] Error: Maximum number of mail processes exceeded
by Antonio Casado Rodríguez 12 Nov '08

12 Nov '08

Hi, i don't know. Is normal login_max_processes_count > 1024?? Our environment is about 1700 users (imaps + thunderbird or imaps+horde). The server is RedHat Enterprise Linux 5.2 User logins different in a hour: # cat dovecot.info | grep 'Nov 11 10' | grep "login: Login" | cut -d'<' -f2 | cut -d'>' -f1 | sort | uniq | wc -l 685 Logins in a hour: # cat dovecot.info | grep 'Nov 11 10' | grep "login: Login" | wc -l 5749 Is normal?? Should i increment login_max_processes_count? # dovecot -n # 1.0.13: /etc/dovecot.conf log_path: /Correo/log/dovecot/dovecot.log info_log_path: /Correo/log/dovecot/dovecot.info protocols: imaps pop3 managesieve ssl_cert_file: /etc/pki/dovecot/certs/mycert.crt ssl_key_file: /etc/pki/dovecot/private/mycert.key login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login login_executable(managesieve): /usr/libexec/dovecot/managesieve-login login_process_per_connection: no login_max_processes_count: 1024 first_valid_uid: 200 mail_location: maildir:%h/.. mail_executable(default): /usr/local/sbin/post-login-imap-dovecot mail_executable(imap): /usr/local/sbin/post-login-imap-dovecot mail_executable(pop3): /usr/local/sbin/post-login-pop3-dovecot mail_executable(managesieve): /usr/libexec/dovecot/managesieve mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(pop3): quota mail_plugins(managesieve): mail_plugin_dir(default): /usr/lib64/dovecot/imap mail_plugin_dir(imap): /usr/lib64/dovecot/imap mail_plugin_dir(pop3): /usr/lib64/dovecot/pop3 mail_plugin_dir(managesieve): /usr/lib64/dovecot/managesieve imap_client_workarounds(default): outlook-idle delay-newmail imap_client_workarounds(imap): outlook-idle delay-newmail imap_client_workarounds(pop3): outlook-idle imap_client_workarounds(managesieve): outlook-idle sieve_storage(default): sieve_storage(imap): sieve_storage(pop3): sieve_storage(managesieve): ~/sieve sieve(default): sieve(imap): sieve(pop3): sieve(managesieve): ~/.dovecot.sieve namespace: type: private separator: / location: maildir:%h/.. inbox: yes auth default: passdb: driver: pam userdb: driver: passwd plugin: quota: maildir:storage=1048576

2 2

Re: [Dovecot] Install Configuring and run.
by Marko Weber 12 Nov '08

12 Nov '08

Hello Thorsten , sorry then again ........ details: i got dspam working, it now scans incoming mails and tag them in the headers. X-DSPAM-Result: = Spam X-DSPAM-Confidence: = 0.9984 X-DSPAM-Probability: = 1.0000 X-DSPAM-Signature: = 1,491930ac25229173225906 X-DSPAM-Factors: 15, so far okay. i emerged dovecot-antispam. and thought its easy going , just paste the code snippet of man dovecot-antispam to the imap section in the dovecot.conf . but thats not all i think. i thought now, when moving a mail from incoming to SPAM something happens, but despam.dbug and /var/log/messages dont show anything happen. i did this in the dovecot.conf = mail_plugins = antispam mail_plugin_dir = /usr/lib/dovecot/imap plugin { antispam_trash = trash;Trash;Deleted Items;Deleted Messages antispam_spam = SPAM;Spam antispam_dspam_binary = /usr/bin/dspam antispam_dspam_args = --user;%u } but as told above , moving mails into folder SPAM or from SPAM to incoming dont causes any action the log.files when i retstart dovecot i got following output on screen = /etc/init.d/dovecot restart Warning: Growing pool 'settings' with: 8192 * Stopping dovecot ... [ ok ] Warning: Growing pool 'settings' with: 8192 * Starting dovecot ... Warning: Growing pool 'settings' with: 8192 ILoading modules from directory: /usr/lib/dovecot/imap WGrowing pool 'module loader' with: 2048 IModule loaded: /usr/lib/dovecot/imap/lib90_antispam_plugin.so IEffective uid=65534, gid=65534, home= WGrowing pool 'antispam-pool' with: 2048 [ ok ] dovecot is running after restart and fully working, accepting mails , sending mails all oke. dunno if i told before to you, i use postfix-dovecot-mysql setup, virtual users & domains if you need any other config file or info lemme know. i really want this nice tool to get working. thank you marko Thorsten Vollmer schrieb: > On Sun, 2008-11-09 at 15:15 +0100, Marko Weber wrote: > >> Hello Thorsten, >> i sorted out to get dspam working, >> but it tags too much mails as spam, even mials that are not spam, >> >> now thats the poinzt where dovecot-antispam comes in, >> now my idea is, that mails that get "spam" tag by dspam, >> to retrain by "dovecot-antispam". >> but i dont get thru it. >> maybe this is now the pont where you can help me ? >> > > Asking for help without providing any detail is rather pointless. > > Thorsten > >

2 2

[Dovecot] alternate passwd/shadow
by Jorg B. 12 Nov '08

12 Nov '08

I'm using an alternate password/shadow combo to authenticate IMAP users and I can't seen to get it working... I'm using: passdb shadow { args = /etc/dovecot/shadow } Can somebody please give me some hints on how to get this to work.... Thanks JB

2 3

[Dovecot] dovecot-antispam crm114 config
by Peter Fern 12 Nov '08

12 Nov '08

Hi list, Does anyone have a working crm114 config for dovecot-antispam? I have mailreaver running perfectly otherwise, but it doesn't seem to be called correctly from dovecot-antispam - the css files show no change. Piping a message to the command... `/usr/share/crm114/mailreaver.crm --good -u /shared/domains/domain.tld/users/pfern/.crm/` works as expected, and the logs don't indicate anything useful that I can see as to why it isn't working from dovecot. Log follows: Nov 11 12:56:48 mx0 dovecot: imap-login: Login: user=<pfern(a)domain.tld>, method=PLAIN, rip=xxx.xxx.xxx.xxx, lip=xxx.xxx.xxx.xxx, TLS Nov 11 12:56:48 mx0 dovecot: IMAP(pfern(a)domain.tld): Loading modules from directory: /usr/lib64/dovecot/imap Nov 11 12:56:48 mx0 dovecot: IMAP(pfern(a)domain.tld): Module loaded: /usr/lib64/dovecot/imap/lib90_antispam_plugin.so Nov 11 12:56:48 mx0 dovecot: IMAP(pfern(a)domain.tld): Effective uid=xxxxx, gid=xxxxx, home=/shared/domains/domain.tld/users/pfern Nov 11 12:56:48 mx0 dovecot: IMAP(pfern(a)domain.tld): antispam: plugin initialising (unknown) Nov 11 12:56:48 mx0 dovecot: IMAP(pfern(a)domain.tld): antispam: "trash" is trash folder Nov 11 12:56:48 mx0 dovecot: IMAP(pfern(a)domain.tld): antispam: "Trash" is trash folder Nov 11 12:56:48 mx0 dovecot: IMAP(pfern(a)domain.tld): antispam: "Deleted Items" is trash folder Nov 11 12:56:48 mx0 dovecot: IMAP(pfern(a)domain.tld): antispam: "-SPAM-" is spam folder Nov 11 12:56:48 mx0 dovecot: IMAP(pfern(a)domain.tld): antispam: "-UNSURE-" is unsure folder Nov 11 12:56:48 mx0 dovecot: IMAP(pfern(a)domain.tld): antispam: reaver binary set to /usr/share/crm114/mailreaver.crm Nov 11 12:56:48 mx0 dovecot: IMAP(pfern(a)domain.tld): antispam: reaver extra arg -u Nov 11 12:56:48 mx0 dovecot: IMAP(pfern(a)domain.tld): antispam: reaver extra arg /shared/domains/domain.tld/users/pfern/.crm/ Nov 11 12:56:48 mx0 dovecot: IMAP(pfern(a)domain.tld): antispam: signature header line is "X-CRM114-CacheID" Nov 11 12:56:48 mx0 dovecot: IMAP(pfern(a)domain.tld): maildir: data=/shared/domains/domain.tld/users/pfern/.maildir:INDEX=/var/lib/dovecot/indexes/domain.tld/p/pfern Nov 11 12:56:48 mx0 dovecot: IMAP(pfern(a)domain.tld): maildir++: root=/shared/domains/domain.tld/users/pfern/.maildir, index=/var/lib/dovecot/indexes/domain.tld/p/pfern, control=, inbox=/shared/domains/domain.tld/users/pfern/.maildir Nov 11 12:56:56 mx0 dovecot: IMAP(pfern(a)domain.tld): antispam: mailbox_is_unsure(INBOX.Noojee): 0 Nov 11 12:56:56 mx0 dovecot: IMAP(pfern(a)domain.tld): antispam: mailbox_is_trash(-UNSURE-): 0 Nov 11 12:56:56 mx0 dovecot: IMAP(pfern(a)domain.tld): antispam: mailbox_is_trash(INBOX.Noojee): 0 Nov 11 12:56:56 mx0 dovecot: IMAP(pfern(a)domain.tld): antispam: mail copy: from trash: 0, to trash: 0 Nov 11 12:56:56 mx0 dovecot: IMAP(pfern(a)domain.tld): antispam: mailbox_is_spam(-UNSURE-): 0 Nov 11 12:56:56 mx0 dovecot: IMAP(pfern(a)domain.tld): antispam: mailbox_is_spam(INBOX.Noojee): 0 Nov 11 12:56:56 mx0 dovecot: IMAP(pfern(a)domain.tld): antispam: mailbox_is_unsure(-UNSURE-): 1 Nov 11 12:56:56 mx0 dovecot: IMAP(pfern(a)domain.tld): antispam: mail copy: src spam: 0, dst spam: 0, src unsure: 1

3 4

[Dovecot] dovecot permissions
by Fernando 11 Nov '08

11 Nov '08

Hello list, I would like to configure POP3 email such that user "mark" (only) must be able to retrieve email from my machine using POP3 from within mydomain.com Any ideas?

1 1

[Dovecot] How to specify /var/spool/mail/m/i/mike
by Network Operations 11 Nov '08

11 Nov '08

I was wondering if somebody could tell me how I can tell dovecot (IMAP) to read users' mail boxes at /var/spool/mail/{1st char}/{2nd char}/username . For example: Mailbox for user 'mike' would be located at /var/spool/mail/m/i/mike 'karen' would be at /var/spool/mail/k/a/karen etc... Is this possible is version 1.1.6? Please advise. Thanks JB

2 1

Re: [Dovecot] Another dovecot-antispam plugin can't call dspam
by Eugene 11 Nov '08

11 Nov '08

Hi Johannes, > From: Johannes Berg <johannes(a)sipsolutions.net> >> > I just committed a fix to debugv(), can you try that? If you downloaded >> > the tarball, get this one: >> > http://git.sipsolutions.net/?p=dovecot-antispam.git;a=snapshot;h=HEAD;sf=tgz >> > >> > If you can confirm that works I'll make a new release. >> >> The fixed version works perfectly, thank you very much! > > And it prints the full command line to the syslog, I assume? Thanks for > testing! It solves the problem here as well =) Thanks for the update. Do you plan to implement 'out of band' dspam calling? BTW maybe there is no need for a separate 'queue' folder especially as we only need a message signature. I think it can be stored in some buffer array so as the dspam calls are made i.e. during idle time (or during final cleanup at the latest). Also I am attaching a couple of patches that might be useful. dspam-exec.c.patch adds debug-dumping of the dspam reply (it turned out quite useful not only for the stack corruption problem). Makefile.patch fixes the syntax to compile with gmake under FreeBSD 6.1 and also adjusts the installed plugin permissions. Best wishes Eugene

2 3

[Dovecot] NFS Unbreakable lock issues
by Rod Treweek 11 Nov '08

11 Nov '08

Hello All, We are struggling to find a solution to a problem we are encountering with a load-balanced email setup. Currently, we have a Coyote loadbalancer, and 3 Postfix/Dovecot nodes that then get their information from a mysql database. The problem is that after a couple weeks, we start seeing NFS locking issues occur, which then takes email completely down, requiring a site visit to basically do an interactive mode reboot to shut off NFS so that we can remount the filesystem again. We have our mailstore on an Aberdeen NAS which is accessed over NFS v. 4. Dovecot version 1.1.2 Here's the relevant mysql string: grep -v '^ *$#.*$\?$' dovecot-mysql.conf driver = mysql connect = host=X.X.X.X dbname=Something user=Something password=Something password_query = SELECT username as user, password, concat('/NFS1MAILDIR/mailSysV2/', maildir) as userdb_home, concat('maildir:/NFS1MAILDIR/mailSysV2/', maildir) as userdb_mail, 143 as userdb_uid, 143 as userdb_gid, concat('*:bytes=', floor(quota*1024)) AS quota_rule FROM mailbox WHERE username = '%u' AND active = '1' user_query = SELECT concat('/NFS1MAILDIR/mailSysV2/', maildir) as home, concat('maildir:/NFS1MAILDIR/mailSysV2/', maildir) as mail, concat('maildir:/NFS1MAILDIR/mailSysV2/', maildir) as maildir, 143 AS uid, 143 AS gid, concat('*:bytes=', floor(quota*1024)) AS quota_rule FROM mailbox WHERE username = '%u' AND active = '1' And here's what our configuration is on each of the nodes: dovecot -n # 1.1.2: /usr/local/etc/dovecot.conf protocols: imap pop3 ssl_ca_file: /usr/local/etc/dovecot/certs/tdpserver.crt ssl_cert_file: /usr/local/etc/dovecot/certs/tdpserver.crt ssl_key_file: /usr/local/etc/dovecot/certs/tdpserver.key ssl_parameters_regenerate: 0 ssl_cipher_list: ALL:!LOW:!SSLv2 disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login login_user: postfix login_greeting: Something witty here.. login_process_per_connection: no login_max_connections: 512 max_mail_processes: 2048 mail_max_userip_connections: 50 verbose_proctitle: yes first_valid_uid: 69 last_valid_uid: 500 first_valid_gid: 69 last_valid_gid: 500 mail_access_groups: postfix mail_privileged_group: postfix mail_location: mbox:/NFS1MAILDIR/mailSysV2/%d/%u:INDEX=/usr/local/mail/indexes/%d/%1n/%n mmap_disable: yes dotlock_use_excl: no mail_nfs_storage: yes mail_nfs_index: yes mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(pop3): quota mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 imap_client_workarounds(default): delay-newmail netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(imap): delay-newmail netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(pop3): pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh auth default: mechanisms: login plain user: dovecot passdb: driver: sql args: /usr/local/etc/dovecot-mysql.conf userdb: driver: sql args: /usr/local/etc/dovecot-mysql.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: dovecot group: dovecot plugin: quota: dict:user::proxy::quota imap_quota: dict:user::proxy::quota quota_rule: *:storage=528576 dict: quota: mysql:/usr/local/etc/dovecot/dovecot-dict-quota.conf Any help you can offer is greatly appreciated, as well as opinions on any other 'validated' postfix/dovecot email enterprise design solutions. Thanks Very Much In Advance, R.T

1 0

[Dovecot] First release (v0.1.0) of the new Sieve implementation for Dovecot v1.2
by Stephan Bosch 11 Nov '08

11 Nov '08

Hello Dovecot users, Finally, after little more than a year, I finished the first release of the new Sieve implementation for Dovecot. The main reason for rewriting the Sieve engine is to provide more reliable script execution and to provide better error messages to users and system administrators. Also, since the Sieve language evolves quickly, with new language extensions published every year, the aim is to provide support for quickly extending the engine with new features. This implementation aims to comply to RFC8225 and it provides support for the following Sieve language extensions: * fileinto * reject * envelope * encoded-character * vacation * subaddress * relational * regex * imap4flags * copy * include * body * variables In comparison to the old CMU Sieve plugin, I added support for the very useful variables extension. However, the notify extension is notably missing. This will be implemented for next major release (0.2.x). Refer to the README file for a full list of its features: http://hg.rename-it.nl/dovecot-libsieve/raw-file/0.1.0/README Installation ------------ The source package is available as follows: http://www.rename-it.nl/dovecot/1.2/dovecot-1.2-sieve-0.1.0.tar.gz http://www.rename-it.nl/dovecot/1.2/dovecot-1.2-sieve-0.1.0.tar.gz.sig Alternatively, it can be cloned from the mercurial repository: hg clone http://hg.rename-it.nl/dovecot-libsieve The compilation procedure is identical to the cmusieve plugin (http://wiki.dovecot.org/LDA/Sieve) Don't forget to execute ./autogen.sh first if you obtained the sources through mercurial. This release will not compile against Dovecot versions older than v1.2.alpha3. The configuration is very similar to the original plugin as well. The most notable difference is the name of the plugin, which is simply 'sieve' in stead of 'cmusieve'. After compilation, the Sieve engine can be verified before deployment using the included test suite. This is done by executing `make test` in the top of the source tree. The test suite is known to finish flawlessly on the i386 and amd64 platforms. The test suite is not very comprehensive yet, as it only tests the evaluation of scripts and omits testing the actual execution of actions. As this release contains about 30k effective lines of fresh code, bugs will eventually surface. Make sure that you provide enough information to reproduce the problem if you report bugs, i.e. the script and the mail message that caused the problem and/or relevant log entries. Have fun testing the new Sieve plugin. Don't hesitate to notify me when there are problems. Regards, -- Stephan Bosch stephan(a)rename-it.nl IRC: Freenode, #dovecot, S[r]us

2 6

[Dovecot] ocfs2 dovecot
by Robert Schetterer 10 Nov '08

10 Nov '08

Hi Timo, in the wiki there is only talked about gfs filesystem are there any known breaking problems using ocfs2 with dovecot ? in my vmware setup ocfs2 seems to be more debian/ubuntu config friendly like gfs dont got gfs to run, perhaps this might be better on suse/centos/redhat but i simply want to use ubuntu hardy server version -- Best Regards MfG Robert Schetterer Germany/Munich/Bavaria

2 3

Re: [Dovecot] dovecot Digest, Vol 67, Issue 19
by Tahir riaz 10 Nov '08

10 Nov '08

Thanks Buddy, I got it working. It was giving error when running make 'undefined reference to `request_init' etc' then I ran it with gmake LDFLAGS+=-lwrap and it worked and everything is working fine. Thanks again for your help Thankyou Tahir Riaz Assistant Director (Systems) COMSATS Internet Services COMSATS Headquarters Building 9, Shahrah-e-Jamhuriat, G-5/2 Islamabad. -----Original Message----- From: dovecot-bounces+tahir.riaz=comsats.net.pk(a)dovecot.org [mailto:dovecot-bounces+tahir.riaz=comsats.net.pk@dovecot.org] On Behalf Of dovecot-request(a)dovecot.org Sent: Friday, November 07, 2008 4:48 PM To: dovecot(a)dovecot.org Subject: dovecot Digest, Vol 67, Issue 19 Send dovecot mailing list submissions to dovecot(a)dovecot.org To subscribe or unsubscribe via the World Wide Web, visit http://dovecot.org/cgi-bin/mailman/listinfo/dovecot or, via email, send a message with subject or body 'help' to dovecot-request(a)dovecot.org You can reach the person managing the list at dovecot-owner(a)dovecot.org When replying, please edit your Subject line so it is more specific than "Re: Contents of dovecot digest..." Today's Topics: 1. Re: Cannot get the libwrap patch work (Edgar Fu?) 2. libwrap patch for 1.1.6 (Edgar Fu?) 3. Re: Cannot get the libwrap patch work (Edgar Fu?) 4. Problem witch dovecot-auth (Grzegorz Zalewski) 5. Problem witch dovecot-auth continue (Grzegorz Zalewski) 6. limit logins by time (Andre H?bner) 7. Re: limit logins by time (Timo Sirainen) 8. Re: limit logins by time (Andre H?bner) 9. Re: limit logins by time (Timo Sirainen) ---------------------------------------------------------------------- Message: 1 Date: Fri, 7 Nov 2008 12:01:43 +0100 From: Edgar Fu? <ef(a)math.uni-bonn.de> Subject: Re: [Dovecot] Cannot get the libwrap patch work To: Dovecot Mailing List <dovecot(a)dovecot.org> Message-ID: <20081107110142.GA304(a)orion.math.uni-bonn.de> Content-Type: text/plain; charset=us-ascii > "Error: login_tcp_wrappers can't be used because Dovecot wasn't built with libwrap" What does the configure script tell you about "tcpd.h usability" and "tcpd.h presence"? What does config.log say about them? ------------------------------ Message: 2 Date: Fri, 7 Nov 2008 12:05:26 +0100 From: Edgar Fu? <ef(a)math.uni-bonn.de> Subject: [Dovecot] libwrap patch for 1.1.6 To: Dovecot Mailing List <dovecot(a)dovecot.org> Message-ID: <20081107110526.GB304(a)orion.math.uni-bonn.de> Content-Type: text/plain; charset="us-ascii" Btw, I've updated the patch for 1.1.6, see attached file.

2 1

Re: [Dovecot] Managesieve: Remote login fails
by Brainkiller - Tom 10 Nov '08

10 Nov '08

Stephan Bosch schreef: >> Brainkiller schreef: >>> Hello, >>> >>> I've been trying to get managesieve to work for our LAN, but when I >>> try to login from a remote host i always get the following line in >>> the log file: >>> dovecot: child 26014 (login) killed with signal 11 >>> >>> When i enable debuging, it just gives me that line, nothing more. I >>> can only login from the localhost through telnet but not from a >>> remote host. >> This is a segmentation fault (crash) and therefore definitely a bug >> in the ManageSieve service. But without more information I cannot fix >> find and fix this bug. You should try to obtain a core dump or a gdb >> trace as explained at http://dovecot.org/bugreport.html . Debugging >> the login daemons can be a little more tricky. I usually attach gdb >> to the managesieve-login process that is handling my connection >> (using the gdb attach command). Be sure to compile dovecot with >> debugging symbols enabled (default Debian packages are stripped). >> >> It is also interesting to know when exactly during the login process >> it crashes. If you login manually from a remote host (as explained in >> section 6 of http://wiki.dovecot.org/ManageSieve) you will be able to >> check where it crashes. If you do not use TLS, you can also sniff the >> traffic between client and server using ngrep to see where the login >> process dies. >> >> Regards, >> Hello again, I tried to get a coredump with the infromation an the provided web-page. However i never got a dump. I used the packages provided by "deb http://xi.rename-it.nl/debian/ testing-auto main". I don't know if these contain the debugging symbols. So it seems i can't provide any further information. Regard, Tom

3 3

[Dovecot] Managesieve: Remote login fails
by Brainkiller 09 Nov '08

09 Nov '08

Hello, I've been trying to get managesieve to work for our LAN, but when I try to login from a remote host i always get the following line in the log file: dovecot: child 26014 (login) killed with signal 11 When i enable debuging, it just gives me that line, nothing more. I can only login from the localhost through telnet but not from a remote host. My conf: # 1.1.6: /etc/dovecot/dovecot.conf # OS: Linux 2.6.26.5.2008.10.03 i686 Debian lenny/sid ext3 log_timestamp: %Y-%m-%d %H:%M:%S protocols: imaps managesieve listen(default): * listen(imap): * listen(managesieve): *:12000 ssl_listen(default): * ssl_listen(imap): * ssl_listen(managesieve): ssl_cert_file: /etc/dovecot/mail.lan-cert.pem ssl_key_file: /etc/dovecot/mail.lan-key.pem ssl_cipher_list: ALL:!LOW:!SSLv2 login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(managesieve): /usr/lib/dovecot/managesieve-login login_process_size: 80 login_processes_count: 6 login_max_processes_count: 256 login_max_connections: 1024 mail_access_groups: mail mail_location: maildir:/home/mail/%u mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(managesieve): /usr/lib/dovecot/managesieve mail_plugins(default): quota trash imap_quota fts fts_squat mail_plugins(imap): quota trash imap_quota fts fts_squat mail_plugins(managesieve): mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(managesieve): /usr/lib/dovecot/modules/managesieve imap_client_workarounds(default): tb-extra-mailbox-sep imap_client_workarounds(imap): tb-extra-mailbox-sep imap_client_workarounds(managesieve): dict_db_config: /etc/dovecot/dovecot-db.conf managesieve_implementation_string(default): dovecot managesieve_implementation_string(imap): dovecot managesieve_implementation_string(managesieve): Cyrus timsieved v2.2.13 sieve_storage(default): sieve_storage(imap): sieve_storage(managesieve): /home/mail/sieve/%u/scripts sieve(default): sieve(imap): sieve(managesieve): /home/mail/sieve/%u/dovecot.sieve namespace: type: private separator: / inbox: yes list: yes subscriptions: yes auth default: mechanisms: plain login cache_negative_ttl: 60 passdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf userdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf socket: type: listen client: path: /var/run/dovecot/auth-client mode: 432 master: path: /var/run/dovecot/auth-master mode: 438 user: dovecot group: mail plugin: fts: squat sieve: ~/.dovecot.sieve quota: maildir quota_rule: *:storage=190M quota_rule2: Trash:storage=50M acl: vfile:/etc/dovecot/dovecot-acls trash: /etc/dovecot/dovecot-trash.conf

3 2

[Dovecot] antispam plugin claims "antispam signature not found"
by Jakob Curdes 09 Nov '08

09 Nov '08

Hi, I am trying to setup the antispam plugin using the direct dspam backend. I have set antispam_signature = X-DSPAM-Signature in dovecot.conf and in all mails I have signature lines like X-DSPAM-Signature: 1,49084a24139132188715614 but still, if I try to move a mail into the spam folder, i get the IMAP error message "antispam signature not found". I thought it might have to do with permissions and made sure that the user running dovecot is able to execute the dspam binary. I also tried to enable debug logging to syslog (via the .config file in the make process) but I do not see any debug messages showing up; where should these go? to the mail facility? Perhaps somebody who has a working setup can shed some light on this? Yours, JC

2 4

[Dovecot] Install Configuring and run.
by Marko Weber 09 Nov '08

09 Nov '08

Hello,. i installed dovecot with virtual user and domains. but i dont get thru "dovecot-antispam" config. is there any HOWTO, for gentoo , how to setup and configure dovecot-antispam ? with examples for the config files ? maybe i have dspam self totally wrong configured. thanks marko

4 15

Re: [Dovecot] Cannot get the libwrap patch work
by Tahir riaz 08 Nov '08

08 Nov '08

Hello again, Generated the configure script with autoconf. But stiil the same error when I start dovecot "Error: login_tcp_wrappers can't be used because Dovecot wasn't built with libwrap" . Below are the usability and presence report from config.log configure:30349: checking tcpd.h usability configure:30366: gcc -c -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -Wstrict-aliasing=2 -I/usr/kerberos/include conftest.c >&5 configure:30372: $? = 0 configure:30386: result: yes configure:30390: checking tcpd.h presence configure:30405: gcc -E conftest.c configure:30411: $? = 0 configure:30425: result: yes configure:30458: checking for tcpd.h configure:30465: result: yes ac_cv_header_sys_vmount_h=no ac_cv_header_tcpd_h=yes ac_cv_header_ucontext_h=yes Thankyou Tahir Riaz Assistant Director (Systems) COMSATS Internet Services COMSATS Headquarters Building 9, Shahrah-e-Jamhuriat, G-5/2 Islamabad. -----Original Message----- From: Tahir riaz [mailto:tahir.riaz@comsats.net.pk] Sent: Saturday, November 08, 2008 1:00 PM To: 'dovecot(a)dovecot.org' Subject: RE: Cannot get the libwrap patch work Hello, Again the same issue. The patch is not working again. There are no signs of tcpd.h in config.log. Do I have to make changes in configure script also. I am not a pogrammer so I follwed the step by step instructions on editing the described file. Are some other steps required ? configure is used with following parameters ./configure --prefix=/userdata/usr/local/dovecot-1.1.6 --with-libwrap --with-zlib --with-storages=maildir,mbox,raw Thankyou Tahir Riaz Assistant Director (Systems) COMSATS Internet Services COMSATS Headquarters Building 9, Shahrah-e-Jamhuriat, G-5/2 Islamabad. -----Original Message----- From: dovecot-bounces+tahir.riaz=comsats.net.pk(a)dovecot.org [mailto:dovecot-bounces+tahir.riaz=comsats.net.pk@dovecot.org] On Behalf Of dovecot-request(a)dovecot.org Sent: Friday, November 07, 2008 4:48 PM To: dovecot(a)dovecot.org Subject: dovecot Digest, Vol 67, Issue 19 Send dovecot mailing list submissions to dovecot(a)dovecot.org To subscribe or unsubscribe via the World Wide Web, visit http://dovecot.org/cgi-bin/mailman/listinfo/dovecot or, via email, send a message with subject or body 'help' to dovecot-request(a)dovecot.org You can reach the person managing the list at dovecot-owner(a)dovecot.org When replying, please edit your Subject line so it is more specific than "Re: Contents of dovecot digest..." Today's Topics: 1. Re: Cannot get the libwrap patch work (Edgar Fu?) 2. libwrap patch for 1.1.6 (Edgar Fu?) 3. Re: Cannot get the libwrap patch work (Edgar Fu?) 4. Problem witch dovecot-auth (Grzegorz Zalewski) 5. Problem witch dovecot-auth continue (Grzegorz Zalewski) 6. limit logins by time (Andre H?bner) 7. Re: limit logins by time (Timo Sirainen) 8. Re: limit logins by time (Andre H?bner) 9. Re: limit logins by time (Timo Sirainen) ---------------------------------------------------------------------- Message: 1 Date: Fri, 7 Nov 2008 12:01:43 +0100 From: Edgar Fu? <ef(a)math.uni-bonn.de> Subject: Re: [Dovecot] Cannot get the libwrap patch work To: Dovecot Mailing List <dovecot(a)dovecot.org> Message-ID: <20081107110142.GA304(a)orion.math.uni-bonn.de> Content-Type: text/plain; charset=us-ascii > "Error: login_tcp_wrappers can't be used because Dovecot wasn't built with libwrap" What does the configure script tell you about "tcpd.h usability" and "tcpd.h presence"? What does config.log say about them? ------------------------------ Message: 2 Date: Fri, 7 Nov 2008 12:05:26 +0100 From: Edgar Fu? <ef(a)math.uni-bonn.de> Subject: [Dovecot] libwrap patch for 1.1.6 To: Dovecot Mailing List <dovecot(a)dovecot.org> Message-ID: <20081107110526.GB304(a)orion.math.uni-bonn.de> Content-Type: text/plain; charset="us-ascii" Btw, I've updated the patch for 1.1.6, see attached file.

2 1

Re: [Dovecot] Cannot get the libwrap patch work
by Tahir riaz 08 Nov '08

08 Nov '08

Hello, Again the same issue. The patch is not working again. There are no signs of tcpd.h in config.log. Do I have to make changes in configure script also. I am not a pogrammer so I follwed the step by step instructions on editing the described file. Are some other steps required ? configure is used with following parameters ./configure --prefix=/userdata/usr/local/dovecot-1.1.6 --with-libwrap --with-zlib --with-storages=maildir,mbox,raw Thankyou Tahir Riaz Assistant Director (Systems) COMSATS Internet Services COMSATS Headquarters Building 9, Shahrah-e-Jamhuriat, G-5/2 Islamabad. -----Original Message----- From: dovecot-bounces+tahir.riaz=comsats.net.pk(a)dovecot.org [mailto:dovecot-bounces+tahir.riaz=comsats.net.pk@dovecot.org] On Behalf Of dovecot-request(a)dovecot.org Sent: Friday, November 07, 2008 4:48 PM To: dovecot(a)dovecot.org Subject: dovecot Digest, Vol 67, Issue 19 Send dovecot mailing list submissions to dovecot(a)dovecot.org To subscribe or unsubscribe via the World Wide Web, visit http://dovecot.org/cgi-bin/mailman/listinfo/dovecot or, via email, send a message with subject or body 'help' to dovecot-request(a)dovecot.org You can reach the person managing the list at dovecot-owner(a)dovecot.org When replying, please edit your Subject line so it is more specific than "Re: Contents of dovecot digest..." Today's Topics: 1. Re: Cannot get the libwrap patch work (Edgar Fu?) 2. libwrap patch for 1.1.6 (Edgar Fu?) 3. Re: Cannot get the libwrap patch work (Edgar Fu?) 4. Problem witch dovecot-auth (Grzegorz Zalewski) 5. Problem witch dovecot-auth continue (Grzegorz Zalewski) 6. limit logins by time (Andre H?bner) 7. Re: limit logins by time (Timo Sirainen) 8. Re: limit logins by time (Andre H?bner) 9. Re: limit logins by time (Timo Sirainen) ---------------------------------------------------------------------- Message: 1 Date: Fri, 7 Nov 2008 12:01:43 +0100 From: Edgar Fu? <ef(a)math.uni-bonn.de> Subject: Re: [Dovecot] Cannot get the libwrap patch work To: Dovecot Mailing List <dovecot(a)dovecot.org> Message-ID: <20081107110142.GA304(a)orion.math.uni-bonn.de> Content-Type: text/plain; charset=us-ascii > "Error: login_tcp_wrappers can't be used because Dovecot wasn't built with libwrap" What does the configure script tell you about "tcpd.h usability" and "tcpd.h presence"? What does config.log say about them? ------------------------------ Message: 2 Date: Fri, 7 Nov 2008 12:05:26 +0100 From: Edgar Fu? <ef(a)math.uni-bonn.de> Subject: [Dovecot] libwrap patch for 1.1.6 To: Dovecot Mailing List <dovecot(a)dovecot.org> Message-ID: <20081107110526.GB304(a)orion.math.uni-bonn.de> Content-Type: text/plain; charset="us-ascii" Btw, I've updated the patch for 1.1.6, see attached file.

1 0

[Dovecot] Renames across namespaces
by Ben Winslow 08 Nov '08

08 Nov '08

Will Dovecot ever support renames across namespaces? I'm attempting to support mailboxes under "INBOX" for compatibility with Courier, which I'm trying to replace, while also supporting mailboxes with no prefix. I don't want to confuse new users (who aren't already subscribed to their mailboxes with the INBOX prefix) by listing the entire tree twice (parented at the root and at INBOX.) This configuration seems to provide what I want: mail_location: maildir:~/mail namespace: type: private separator: . prefix: INBOX. inbox: yes hidden: yes namespace: type: private separator: . list: yes subscriptions: yes ...except that, when a legacy user tries to delete a mailbox under INBOX, Thunderbird (at least) renames the mailbox to make it a child of Trash at the root, e.g.: tag123 RENAME "INBOX.test" "Trash.test" tag123 NO Can't rename mailbox to another storage type. I was a little surprised that it didn't work at first, since they're both using the same (default) mail_location, but I see why it doesn't work after looking at the code. Is there any chance cross-namespace (and even cross-storage _type_) wouldn't eventually be supported? (I guess that the big problem is making cross-type renames appear atomic to clients.) Is there a better way to do what I'm trying to do? -- Ben Winslow <rain(a)bluecherry.net>

1 0

[Dovecot] Fetch order
by Warren Baker 07 Nov '08

07 Nov '08

Hi all, Is there a function to modify the fetch order of messages? We have just migrated from Courier to Dovecot and I notice that there is a slight difference in the way messages are fetched in Dovecot compared to Courier. Both Courier and Dovecot sort the mailbox correctly (UID SORT (REVERSE ARRIVAL) UTF-8 ALL), for example: [ 13:22:02.790 ]50800314 UID SORT (REVERSE ARRIVAL) UTF-8 ALL * SORT 195 194 193 192 191 190 189 188 187 186 185 184 183 182 181 180 179 178 177 176 175 174 173 172 171 170 169 168 167 166 165 164 163 162 161 160 159 158 157 156 155 154 153 152 151 150 149 148 147 146 145 144 143 142 141 140 139 138 137 136 135 134 133 132 131 130 129 128 127 126 125 124 123 122 121 120 119 118 117 116 115 114 113 112 111 110 109 108 107 106 105 104 103 102 101 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 43 44 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 1 4 8 10 15 18 20 25 14 19 2 3 5 9 13 17 21 22 7 11 16 6 12 23 24 50800314 OK Sort completed. But if we fetch the latest 25 messages, Dovecot will fetch the lowest UID in the list first, so from the example above it would fetch UID 171,172,173 and so on. Courier on the other hand would start the fetch on UID 195,194,193 and so on. We have an internal developed webmail application that has been affected by this change, so I am just wondering whether there is a interim fix while we fix our webmail application to cater for this. Thanks, Warren

2 3

[Dovecot] limit logins by time
by Andre Hübner 07 Nov '08

07 Nov '08

Hello, i want to limit the count of pop3 logins for users by time. Whats the correct way to do this? I searched the webpage and conf parameters but did not find a fitting solution. Please give me litte hint. Thanks, Andre

2 4

[Dovecot] index storage usage
by Giorgenes Gelatti 07 Nov '08

07 Nov '08

Hello there, I failed in finding the answer in the wiki so i'm asking it here. In average, how much the dovecot's indexes increase the usage of storage, compared to a standard maildir mailbox? I believe it would be a function of the number of messages instead of the message's size. Is there a known aproximated function for that? Thank you. gpg

2 1

[Dovecot] Cannot get the libwrap patch work
by Tahir riaz 07 Nov '08

07 Nov '08

Hello there, I have been trying to make the patch work for libwrap(TCP Wrappers) posted on http://dovecot.org/patches <http://dovecot.org/patches%20Patch%20of%201.1> Patch of 1.1 but could not get it work. Any help will be highly appreciated. After compiling and running it I get error "Error: login_tcp_wrappers can't be used because Dovecot wasn't built with libwrap" Dovecot Version dovecot-1.1.5 OS CENTOS 5.1 Thankyou Tahir Riaz Assistant Director (Systems) COMSATS Internet Services COMSATS Headquarters Building 9, Shahrah-e-Jamhuriat, G-5/2 Islamabad.

2 3

[Dovecot] Problem witch dovecot-auth
by Grzegorz Zalewski 07 Nov '08

07 Nov '08

Hello i`m post in this mailing list first time. I`ve debian Etch witch dovecot version 1.2.alpha3 from: deb http://xi.rename-it.nl/debian/ experimental-auto main I`m installing this version dovecot becouse this version solved my problem witch imap problem. It`s working but once or twice times for a day i have error in log: -------- dovecot: 2008-11-06 22:11:59 Error: auth(default): Raw backtrace: dovecot-auth [0x8075761] -> dovecot-auth [0x80757e2] -> dovecot-auth [0x8075179] -> dovecot-auth [0x805c478] -> dovecot-auth(io_loop_handle_timeouts+0xe9) [0x8078629] -> dovecot-auth(io_loop_handler_run+0x82) [0x8078eb2] -> dovecot-auth(io_loop_run+0x20) [0x80783d0] -> dovecot-auth(main+0x28c) [0x805e07c] -> /lib/i686/cmov/libc.so.6(__libc_start_main+0xe5) [0xb7a7b455] -> dovecot-auth [0x8053cd1]dovecot: 2008-11-06 22:11:59 Error: child 28945 (auth) killed with signal 6 -------- my dovecot configuration is: -------- # 1.2.alpha3: /etc/dovecot/dovecot.conf# OS: Linux 2.6.18-6-686 i686 Debian 4.0log_path: /var/log/dovecot.loglog_timestamp: %Y-%m-%d %H:%M:%Sprotocols: imap imaps pop3 pop3sssl_listen(default): my_ip:993ssl_listen(imap): my_ip:993ssl_listen(pop3): my_ip:995ssl_cert_file: /etc/dovecot/ssl/dovecot.pemssl_key_file: /etc/dovecot/ssl/dovecot.pemverbose_ssl: yeslogin_dir: /var/run/dovecot/loginlogin_executable(default): /usr/lib/dovecot/imap-loginlogin_executable(imap): /usr/lib/dovecot/imap-loginlogin_executable(pop3): /usr/lib/dovecot/pop3-loginlogin_greeting: POP readyverbose_proctitle: yesmail_access_groups: postfixmail_location: maildir:~/Maildirmail_executable(default): /usr/lib/dovecot/imapmail_executable(imap): /usr/lib/dovecot/imapmail_executable(pop3): /usr/lib/dovecot/pop3mail_plugin_dir(default): /usr/lib/dovecot/modules/imapmail_plugin_dir(imap): /usr/lib/dovecot/modules/imapmail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3imap_client_workarounds: outlook-idlepop3_client_workarounds: outlook-no-nulsauth default: verbose: yes debug: yes passdb: driver: pam userdb: driver: passwd -------- Have anyone any idea what is wrong ??

1 0

[Dovecot] (1.0.13) fsync failed: Disk quota exceeded for some accounts
by Eric Marin 07 Nov '08

07 Nov '08

Hello all, We've recently migrated the mail server used by our 5000 students, from Tru64/UW-IMAP/Procmail/Postfix/mbox to Debian Etch/Dovecot/Deliver/Postfix/Maildir E-mails are not stored directly on the server (except for index and control files), but on an NAS that exports the students' homedirs on NFS. Each student has a 100MB quota on the NAS. Here is the configuration : vega:~# dovecot -n # 1.0.13: /etc/dovecot/dovecot.conf log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap pop3 listen: [::] ssl_disable: yes disable_plaintext_auth: no verbose_ssl: yes login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login login_greeting_capability(default): yes login_greeting_capability(imap): yes login_greeting_capability(pop3): no login_process_size: 32 login_max_processes_count: 1024 mail_privileged_group: mail mail_location: maildir:~/Maildir:INDEX=/var/mail/index/%u:CONTROL=/var/mail/control/%u maildir_copy_with_hardlinks: yes maildir_copy_preserve_filename: yes mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 pop3_uidl_format(default): pop3_uidl_format(imap): pop3_uidl_format(pop3): %08Xu%08Xv namespace: type: private separator: / inbox: yes namespace: type: private separator: / prefix: mail/ hidden: yes auth default: cache_size: 1024 passdb: driver: pam args: blocking=yes cache_key=%u dovecot userdb: driver: passwd args: blocking=yes When one mails a student that has filled his quota, one immediately receives this message : "Your message to <studentx> was automatically rejected: Not enough disk space Reporting-UA: vega; Dovecot Mail Delivery Agent Final-Recipient: rfc822; studentx Original-Message-ID: <490F0A9A.8030109(a)utc.fr> Disposition: automatic-action/MDN-sent-automatically; deleted" And in /var/log/mail.log : (...) save failed to INBOX: Not enough disk space (...) Rejected: Not enough disk space So far, so good, except that for *some* users (and I can't seem to find anything unusual about their account), one gets this in /var/log/mail.log : Nov 6 10:42:24 vega deliver(studentx): fsync(/voletu/users/studentx/Maildir/tmp/1225964544.P25878Q0M80993.vega) failed: Disk quota exceeded Nov 6 10:42:24 vega deliver(studentx): msgid=<2254E7BC-665D-4599-B719-825E3A58DC1D(a)utc.fr>: save failed to INBOX: Internal error occurred. Refer to server log for more information. [2008-11-06 10:42:24] Nov 6 10:42:24 vega postfix/local[25827]: 010F45EC18: to=<studentx(a)vega.utc.fr>, orig_to=<studentx(a)etu.utc.fr>, relay=local, delay=0.2, delays=0.02/0/0/0.17, dsn=4.3.0, status=deferred (temporary failure) So for *some* users, it seems that Deliver doesn't detect that there isn't enough space, it tries to write the e-mail and of course fails, then reports an error, and Postfix interprets this as a temporary error and retries later. After about a week : vega:~# qshape deferred T 5 10 20 40 80 160 320 640 1280 1280+ TOTAL 500 1 4 3 9 12 6 8 17 140 300 etu.utc.fr 499 1 4 3 9 12 6 8 17 139 300 vega.utc.fr 1 0 0 0 0 0 0 0 0 1 0 For the students that have this problem (about 30 for now), this happens *even* if I delete ~studentx/Maildir, /var/mail/index/studentx and /var/mail/control/studentx, let Deliver recreate the necessary files (by sending the user a mail) so that everything is clean, artificially fill the quota with a big file in the homedir, then send a mail again. It gets deferred... I have looked at the changelog for Dovecot, but have not found a clear clue that is a bug (if it is !) that has already been corrected in a more recent version... Though if possible, I'd like to keep the Debian package (from etch-backports) instead of compiling it from source. Also, while I've found Dovecot's wiki to be surprisingly informative, there are still a few points that did not seem very clear : - should I use the quota:fs plugin in this case (it seems to work out well without it for most users) ? - would it work in v1.0.13 on NFS ? - if it worked, and I enabled it, what would change for me ? - what is *supposed* to happen without the quota plugin when a user has filled his quota : mail is rejected, or mail is deferred ? - and what about imap_quota ? Best regards, Eric

5 9

[Dovecot] Compiling dovecot 1.1.6 with ICC
by Steve 06 Nov '08

06 Nov '08

Hello list I have compiled PostgreSQL with ICC (Intel C/C++ compiler) and this forces me to compile dovecot 1.1.6 as well with ICC. Trying to compile it with GCC fails, telling me it can not build with PostgreSQL support since it can not find libpq (but libpq is there!). The funny part is that I can compile dovecot 1.1.6 with GCC 4.3.2 against MySQL which is build with ICC. But I can not build against PostgreSQL build with ICC. Why is that? Does any one know the reason why PostgreSQL is treated differently then MySQL in dovecot? Well... so no way to get around to build dovecote with ICC. I can build dovecot with ICC but as soon as I start it, I get a crash. Loading the core dump into GDB does not give me much info. Probably because I have not compiled dovecot with debug symbols. Currently I am doing that. Hopefully this will produce better core dumps. I will post more info as soon as I get them. But in the mean time maybe some one has a hint for me how to get dovecot 1.1.6 to build properly with ICC? // Steve -- GMX Download-Spiele: Preizsturz! Alle Puzzle-Spiele Deluxe über 60% billiger. http://games.entertainment.gmx.net/de/entertainment/games/download/puzzle/i…

1 0

Re: [Dovecot] [Postfixadmin-devel] Quota not working ?
by Marko Weber 06 Nov '08

06 Nov '08

Hello Michiel, i sent 2 further mails with 4mb attachement no quota warning, mails was delivered to user. is the "multiplier" in the postfixadmin the wrong one ? or is there a setting that MUST be in main.cf of postfix ? marko Michiel van Baak schrieb: > On 17:20, Thu 06 Nov 08, Marko Weber wrote: > >> Hi Michiel, >> i tried your hints. >> but seems not to go with quota. >> >> i send an 11mb mp3 to user and after that an 6mb mp3 >> the quota is set in postfixadmin to 15mb, so it should send a mail that >> quota is reached or not ? >> > > I think it will send the email on the next mail. > 11 mb != quota reached. 6mb = one email so I think it will go through. > Can you test by sending yet another email now that the user is over > quota? > > >> do i have to set any special on postfixadmin config ? >> maybe its the quota multiplier ? >> >> >> in the postfixadmin config for quota is this = >> >> // Default Domain Values >> // Specify your default values below. Quota in MB. >> $CONF['aliases'] = '15'; >> $CONF['mailboxes'] = '15'; >> $CONF['maxquota'] = '15'; >> >> // Quota >> // When you want to enforce quota for your mailbox users set this to 'YES'. >> $CONF['quota'] = 'YES'; >> // You can either use '1024000' or '1048576' >> $CONF['quota_multiplier'] = '1024000'; >> >> 10240000 is also in the mysql db as "quota" in the quota field for the >> mail where i send the mp3?s >> >> any ideas ? >> >> marko >> >> >> >> >> >> Michiel van Baak schrieb: >> >>> On 00:58, Wed 05 Nov 08, Marko Weber wrote: >>> >>> >>>> I set this in the postfixadmin config.file = >>>> >>>> // Default Domain Values >>>> // Specify your default values below. Quota in MB. >>>> $CONF['aliases'] = '15'; >>>> $CONF['mailboxes'] = '15'; >>>> $CONF['maxquota'] = '15'; >>>> >>>> // Quota >>>> // When you want to enforce quota for your mailbox users set this to 'YES'. >>>> $CONF['quota'] = 'YES'; >>>> // You can either use '1024000' or '1048576' >>>> $CONF['quota_multiplier'] = '15728640'; >>>> >>>> >>>> i gave on postfix admin backend the domain = >>>> >>>> domain settings >>>> --------- >>>> aliase = -1 >>>> mailbox = 12 >>>> max quota 15 >>>> >>>> >>>> >>>> i created a mailbox for this domain and set for this mailbox 15mb quota >>>> >>>> i send an 11mb mp3 to this box and get this = >>>> >>>> This is the mail system at host xxxxxxxx.de. >>>> >>>> I'm sorry to have to inform you that your message could not >>>> be delivered to one or more recipients. It's attached below. >>>> >>>> For further assistance, please send mail to postmaster. >>>> >>>> If you do so, please include this problem report. You can >>>> delete your own text from the attached returned message. >>>> >>>> The mail system >>>> >>>> <xxxx(a)xxxx.de>: message size 15075956 exceeds size limit 10240000 of >>>> server xxxxxxx.de[xxx.xxx.243.37] >>>> >>>> Any ideas why i get size limit 10240000 ???? >>>> >>>> >>> In the main postfix configuration you can set the maximum message size. >>> As you can see, the default is 10MB per message. >>> >>> To remove all size limits and let the quota actually apply try setting >>> this in your main.cf and reload postfix: >>> >>> mailbox_size_limit = 0 >>> message_size_limit = 0 >>> virtual_mailbox_limit = 0 >>> >>> Good luck. >>> >>> >> ------------------------------------------------------------------------- >> This SF.Net email is sponsored by the Moblin Your Move Developer's challenge >> Build the coolest Linux based applications with Moblin SDK & win great prizes >> Grand prize is a trip for two to an Open Source event anywhere in the world >> http://moblin-contest.org/redirect.php?banner_id=100&url=/ >> _______________________________________________ >> Postfixadmin-devel mailing list >> Postfixadmin-devel(a)lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/postfixadmin-devel >> > >

1 0

[Dovecot] Strange and sudden deletion of mails messages
by נור דאוד 06 Nov '08

06 Nov '08

Hello everyone, I'm having a bizarre problem (bug?) concerning deletion of messages from one of the mailboxes. The platform is set up as follows: FreeBSD 7-STABLE Postfix 2.6-20080411 Dovecot 1.0.13 Webmail using RoundCube 0.1-STABLE The trace (in Postfox logs) revealed that the message has been actually received, and saved to maildir, and then viewed once in Webmail. Hitting Reply in Webmail produced an error, and the letter (somehow) was nowhere to be found on the server! I have no clue what's the cause of this. Is there a way in Dovecot to catch all commands sent to the server, thus revealing who in effect deleted the message? Thanks in advance. Noor

3 3

[Dovecot] feature request for dovecot 1.2 Master users/passwords for virtual domain admins
by Robert Schetterer 06 Nov '08

06 Nov '08

Hi Timo, currently superadmins can be configured in dovecot i.e in mysql as "superadmins" this means the can log in in any mailbox on the server this is a very nice feature in real world scenarios specially for support people in postfixadmin i.e there are also defined domainadmins ( this is for delegate usermail creation/delete etc in the postfixadmingui ) in mysql it would be nice to have or simply use postfixadmins mysql domainadmins in mysql table entries to login for domainadmins only login to mailboxes of their related maildomain this would be also massiv helpfull for postmasters/support people in a full virtual setup perhaps you might get this in dovecot 1.2 before closing at beta stage -- Best Regards MfG Robert Schetterer Germany/Munich/Bavaria

2 1

[Dovecot] How do I use plus-addressing in Dovecot 1.1.x?
by Jon Fullmer 06 Nov '08

06 Nov '08

I'm using Postfix, Amavisd-new/SpamAssassin, and Dovecot. They all run on the same server (running Linux). The mailboxes are stored on the same server in maildir format. The logical path for incoming messages (as I understand it) is: 1) received by Postfix; handed off to Amavisd-new 2) Amavisd-new checks to see whether or not it's spam/undesirable; hands off to Dovecot deliver 3) Dovecot deliver delivers the message to the local mailbox Under each of my user's mailbox is a submailbox called "spam". Just so I don't confuse terminologies (I'm no IMAP/maildir expert), for example, we have someone(a)domain.com. My configured mail_location is "maildir:/srv/mail/%d/%n", so this person's mailbox is located here: / srv/mail/domain.com/someone/ Within this directory is another mailbox: /srv/mail/domain.com/someone/.spam/ The plan is to have Dovecot deliver send a message (which has been labeled by Amavisd-new as spam) directly to the ".spam" submailbox, instead of the INBOX (/srv/mail/domain.com/someone/). With Dovecot 1.0.x, I used "plus addressing". Amavisd-new was configured so that, if a message was found to be spam, it delivered the message to Dovecot deliver, but changed the delivery address. Now, instead of "someone(a)domain.com ", it was "someone+spam(a)domain.com". Dovecot deliver took this message and delivered it correctly to the ".spam" submailbox (/srv/mail/ domain.com/someone/.spam/) Just to emphasize, this process does work (using Dovecot 1.0.x). With Dovecot 1.1.0, this process is broken. Now, spam messages are delivered to the INBOX instead, and, when checking the dovecot- deliver.log, I'm seeing "save failed to spam: Unknown namespace". As best as I can tell, the answer seems to lie in "namespaces" as a feature added in Dovecot 1.1.0. The problem is that I don't understand how I could use them to resolve this situation. I've read the documentation. I've looked at as many example configurations as I could find. Please help. I want to get this working again. I'm sure it's something very straight-forward, but I don't understand. How must I change my Dovecot 1.1.x configuration so that my "plus addressing" set up (detailed above) will work again? Or is there a better way? Thanks so much for your help, and thanks for a great product! - Jon

5 10

[Dovecot] (v1.1.6) Fatal: userdb didn't return a home directory, but mail location used it (%h)
by Zhang Huangbin 06 Nov '08

06 Nov '08

Hi, all. I upgrade to 1.1.6, but the same config didn't work now. Error message while start dovecot: ----<---- Starting Dovecot Imap: Fatal: userdb didn't return a home directory, but mail location used it (%h): /%Lh/%Ld/%Ln/:INDEX=/%Lh/%Ld/%Ln/ Error: imap dump-capability process returned 89 Fatal: Invalid configuration in /etc/dovecot.conf ----<---- Here is my dovecot.conf file and dovecot-ldap.conf: ----<---- # dovecot -n # 1.1.6: /etc/dovecot.conf # OS: Linux 2.6.18-92.el5 x86_64 Red Hat Enterprise Linux Server release 5.2 (Tikanga) log_path: /var/log/dovecot.log protocols: pop3 pop3s imap imaps listen: * ssl_cert_file: /etc/pki/iRedMail/SSL_Cert.pem ssl_key_file: /etc/pki/iRedMail/SSL_Key.pem login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login mail_uid: 2000 mail_gid: 2000 mail_location: maildir:/%Lh/%Ld/%Ln/:INDEX=/%Lh/%Ld/%Ln/ mail_debug: yes mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugins(default): quota imap_quota zlib mail_plugins(imap): quota imap_quota zlib mail_plugins(pop3): quota zlib mail_plugin_dir(default): /usr/lib64/dovecot/imap mail_plugin_dir(imap): /usr/lib64/dovecot/imap mail_plugin_dir(pop3): /usr/lib64/dovecot/pop3 pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh auth default: mechanisms: plain login default_realm: a.cn user: vmail passdb: driver: ldap args: /etc/dovecot-ldap.conf userdb: driver: ldap args: /etc/dovecot-ldap.conf socket: type: listen client: path: /var/spool/postfix/dovecot-auth mode: 438 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 438 user: vmail group: vmail plugin: quota: maildir quota_rule: *:storage=10M expire: Trash 7 Trash/* 7 Junk 30 expire_dict: proxy::expire auth_socket_path: /var/run/dovecot/auth-master sieve: /var/www/sieve/%Ld/%Ln/.dovecot.sieve dict: expire: db:/var/lib/dovecot/expire/expire.db ----<---- dovecot-ldap.conf ----<---- hosts = 127.0.0.1:389 ldap_version = 3 auth_bind = yes dn = cn=vmail,dc=iredmail,dc=org dnpass = 2888$11175@27748!29315&29049*31446)15524 base = domainName=%d,o=domains,dc=iredmail,dc=org scope = subtree deref = never user_filter = (&(mail=%u)(objectClass=mailUser)(accountStatus=active)) pass_filter = (mail=%u) pass_attrs = userPassword=password default_pass_scheme = CRYPT user_attrs = homeDirectory=home,=sieve_dir=/var/www/sieve/%Ld/%Ln/,mailMessageStore=maildir:mail,mailQuota=quota_rule=*:bytes=%$ ----<---- -- Best regards. - Open Source Mail Server Solution for RHEL/CentOS 5.x: http://code.google.com/p/iredmail/

2 1

[Dovecot] antispam - Unable to determine the destination user
by Romanczyk Guillaume 06 Nov '08

06 Nov '08

Hello, I'm trying to install dovecot antispam plugin and I've some problems with dspam user. When I move a mail out of 'SPAM' folder I have this error in my /var/log/messages : Oct 28 17:01:41 tony2 imap: antispam: /usr/bin/dspam --source=error --class=innocent --signature=47de4679174462472577556 ... Oct 28 17:01:41 tony2 dspam[24313]: Unable to determine the destination user Oct 28 17:01:41 tony2 dspam[24313]: DSPAM agent misconfigured: aborting I've tried to install it by 'emerging' and compiling from sources but with the same result. plugin .config : BACKEND=dspam-exec DOVECOT=/usr/include/dovecot INSTALLDIR=/usr/lib/dovecot/imap USER=vpopmail GROUP=vpopmail #(same result with different user/group) antispam_dspam_args = --user;$EXT@$USER DEBUG=syslog DEBUG_VERBOSE=1 PLUGINNAME=antispam Mail server configuration : - NetQmail (1.05-r8) - Vpopmail (5.4.16) - Dovecot (1.1.4-r1) - dspam (3.8.0-r13) All these packages are emerge without mysql support. If someone is able to give me some help... -- Guillaume Romanczyk Itaapy <http://itaapy.com> Tel +33 (0)1 42 23 67 45 9 rue Darwin, 75018 Paris Fax +33 (0)1 53 28 27 88

3 4

[Dovecot] Limit simultaneous pop3 login for users?
by Patrick MacDonald 05 Nov '08

05 Nov '08

Is there a way to limit simultaneous pop3 logins for users? Like for a user that has pop-every-minute running on two different computers from two different networks? If dovecot can't stop it, anyone know of a trick I could implement? Thanks in advance! Patrick

2 1

[Dovecot] mUTF-7 vs UTF-8 in mailbox names
by Timo Sirainen 05 Nov '08

05 Nov '08

(This is about v1.2 only, v1.1 will stay as it is.) Until today Dovecot didn't care about mailbox names. IMAP RFC requires them to be modified-UTF-7, but Dovecot didn't try to enforce it in any way. Mailbox names in Sieve scripts should be UTF-8, but currently Dovecot doesn't translate them to mUTF-7 as it should. Cyrus also did this until the latest release (v2.3.13). Now that I finally today wrote code to do mUTF-7 <-> UTF-8 conversion, Dovecot can finally do the right thing. But should there be an option to keep things backwards compatible? - IMAP: CREATE command requiring the mailbox name to be valid mUTF-7 is probably ok. Several other servers already verify that mailbox names are valid, so I doubt there are clients left anymore that don't send mUTF-7 names. - deliver -m assumes now that the mailbox name is UTF-8 and converts it to UTF-7. Should there be a -7 parameter that changes this behavior back? - Stephan's Dovecot Sieve also needs to be changed so that the mailbox name in fileinto commands can be UTF-8. If -7 parameter is added, it could control this behavior too. Also I'm wondering if in the future the mailbox names in filesystem should be converted to UTF-8. Probably not anytime soon though.. I also added imap_utf7 binary for doing mUTF-7 <-> UTF-8 conversion.

3 2

[Dovecot] Another dovecot-antispam plugin can't call dspam
by Rob Klingsten 05 Nov '08

05 Nov '08

Hi folks - I am configuring a new system and the antispam plugin is the last piece I need, everything else is working. Thanks to Johannes for this plugin, it's exactly what I want and an elegant solution for filter training. But I've been trying everything I can think of for the last 3 days to get this to work, no success. I've got: Postfix 2.5.3, dspam 3.8.0, Dovecot 1.1.6, Maildrop 2.0.4 and dovecot-antispam 1.0 tarball. I've built dspam from source with --disable-trusted-user-security to try and isolate the source of the plugin problem, which is the message at the IMAP client "Failed to call dspam." Here's what I've got configured for the plugin: antispam_signature = X-DSPAM-Signature antispam_trash = trash;Trash;Deleted Items;Deleted Messages antispam_spam = SPAM;Spam antispam_dspam_binary = /usr/local/bin/dspam antispam_dspam_args = --user %u And here's what happens: Nov 5 09:31:29 venus imap: antispam: plugin initialising (1.0-notgit) Nov 5 09:31:29 venus imap: antispam: "trash" is trash folder Nov 5 09:31:29 venus imap: antispam: "Trash" is trash folder Nov 5 09:31:29 venus imap: antispam: "Deleted Items" is trash folder Nov 5 09:31:29 venus imap: antispam: "Deleted Messages" is trash folder Nov 5 09:31:29 venus imap: antispam: "SPAM" is spam folder Nov 5 09:31:29 venus imap: antispam: "Spam" is spam folder Nov 5 09:31:29 venus imap: antispam: no unsure folders Nov 5 09:31:29 venus imap: antispam: dspam binary set to /usr/local/bin/dspam Nov 5 09:31:29 venus imap: antispam: dspam extra arg --user dump-capability Nov 5 09:31:29 venus imap: antispam: signature header line is "X-DSPAM-Signature" Nov 5 09:31:29 venus dovecot: Dovecot v1.1.6 starting up Nov 5 09:31:29 venus dovecot: auth-worker(default): mysql: Connected to 127.0.0.1 (postfix) Nov 5 09:31:30 venus dovecot: auth(default): new auth connection: pid=686 Nov 5 09:31:30 venus dovecot: auth(default): new auth connection: pid=687 Nov 5 09:31:30 venus dovecot: auth(default): new auth connection: pid=688 Nov 5 09:32:45 venus dovecot: auth(default): client in: AUTH 1 PLAIN service=imap lip=xxxx rip=xxxx lport=143 rport=55904 Nov 5 09:32:45 venus dovecot: auth(default): client out: CONT 1 Nov 5 09:32:45 venus dovecot: auth(default): client in: CONT<hidden> Nov 5 09:32:45 venus dovecot: auth-worker(default): sql(rob(a)xxxx.org,xxxx): query: SELECT password, email AS user FROM users WHERE email = 'rob(a)xxxx.org'; Nov 5 09:32:45 venus dovecot: auth(default): client out: OK 1 user=rob(a)xxxx.org Nov 5 09:32:45 venus dovecot: auth(default): master in: REQUEST 1 688 1 Nov 5 09:32:45 venus dovecot: auth(default): master out: USER 1 rob(a)xxxx.org uid=5000 gid=5000 home=/var/mail/xxxx.org/rob Nov 5 09:32:45 venus dovecot: imap-login: Login: user=<rob(a)xxxx.org>, method=PLAIN, rip=xxxx, lip=xxxx Nov 5 09:32:45 venus dovecot: auth(default): new auth connection: pid=688 Nov 5 09:32:45 venus dovecot: IMAP(rob(a)xxxx.org): Loading modules from directory: /usr/lib/dovecot/imap Nov 5 09:32:45 venus dovecot: IMAP(rob(a)xxxx.org): Module loaded: /usr/lib/dovecot/imap/lib90_antispam_plugin.so Nov 5 09:32:45 venus dovecot: IMAP(rob(a)xxxx.org): Effective uid=5000, gid=5000, home=/var/mail/xxxx.org/rob Nov 5 09:32:45 venus imap: antispam: plugin initialising (1.0-notgit) Nov 5 09:32:45 venus imap: antispam: "trash" is trash folder Nov 5 09:32:45 venus imap: antispam: "Trash" is trash folder Nov 5 09:32:45 venus imap: antispam: "Deleted Items" is trash folder Nov 5 09:32:45 venus imap: antispam: "Deleted Messages" is trash folder Nov 5 09:32:45 venus imap: antispam: "SPAM" is spam folder Nov 5 09:32:45 venus imap: antispam: "Spam" is spam folder Nov 5 09:32:45 venus imap: antispam: no unsure folders Nov 5 09:32:45 venus imap: antispam: dspam binary set to /usr/local/bin/dspam Nov 5 09:32:45 venus imap: antispam: dspam extra arg --user rob(a)xxxx.org Nov 5 09:32:45 venus dovecot: IMAP(rob(a)xxxx.org): maildir: data=/var/mail/xxxx.org/rob Nov 5 09:32:45 venus dovecot: IMAP(rob(a)xxxx.org): maildir++: root=/var/mail/xxxx.org/rob, index=, control=, inbox=/var/mail/xxxx.org/rob Nov 5 09:32:45 venus imap: antispam: signature header line is "X-DSPAM-Signature" Nov 5 09:32:45 venus imap: antispam: mailbox_is_unsure(Spam): 0 Nov 5 09:32:45 venus imap: antispam: mailbox_is_trash(INBOX): 0 Nov 5 09:32:45 venus imap: antispam: mailbox_is_trash(Spam): 0 Nov 5 09:32:45 venus imap: antispam: mail copy: from trash: 0, to trash: 0 Nov 5 09:32:45 venus imap: antispam: mailbox_is_spam(INBOX): 0 Nov 5 09:32:45 venus imap: antispam: mailbox_is_spam(Spam): 1 Nov 5 09:32:45 venus imap: antispam: mailbox_is_unsure(INBOX): 0 Nov 5 09:32:45 venus imap: antispam: mail copy: src spam: 0, dst spam: 1, src unsure: 0 Can anyone give me some more suggestions? thanks! Rob Klingsten

3 9

[Dovecot] problem with i_stream_next_line()
by Giorgenes Gelatti 05 Nov '08

05 Nov '08

Hello there, I have a "subscriptions" file that is *not* ended with a line break (created by another system). When I do a "lsub "" "*"" the last mailbox name is not listed. Debugging a little showed that it looks like i_stream_next_line() is not returning the last line if it doesn't end with a line break. Is this a bug? btw, i'm using version 1.1.6. []'s

2 4

[Dovecot] MasterUser and old rev of Dovecot (0.99.14)
by Christopher Alexander 04 Nov '08

04 Nov '08

I need to migrate an old mail server running Dovecot (0.99.14) to a new server running Dovecot (1.0.7; as shipped with CentOS 5.2). My plan was to use the imapsync utility as this will "seamlessly" do the conversion from mbox to maildir between the boxes as well. I've got the MasterUser authentication working fine on the new host and was just about to start getting MasterUsers working on the old host. I noticed that the old .99 version dovecot.conf seems to have a mildly different syntax from 1.0 dovecot.conf. In particular a lot of the directives do not use braces and such. Is the .99 dovecot.conf file essentially able to deal with the same sort of syntax as outlined in the MasterUsers wiki page? [ http://wiki.dovecot.org/Authentication/MasterUsers ] I just wanted to bounce this off you guys before I started messing with a live system. ;) Thanks in advance. -- Christopher Alexander UNIX Network Administrator Broadband Network Technologies Branch (VPNT), Research Network Systems (MRNS) Communications Research Centre [ http://www.crc.ca ] Government of Canada [ http://www.gc.ca ]

2 3

[Dovecot] how to integrate dspam with dovecot-antispam ?
by Marko Weber 04 Nov '08

04 Nov '08

Hello, i dont get dovecot-antispam working, i think ? any1 can help me, how to configure dovecot-antispam that it work together with dspam ? i have postfix / dovecot setup as virtual user / domains.......... marko thanks for any hints or help. -- -- *Marko Weber* | Administration *SALON DIGITAL* Media GmbH Rothenbaumchaussee 19a 20148 Hamburg T. (040) 429 48 68 - 23 F. (040) 429 48 68 - 20 marko.weber(a)salondigital.de <mailto:marko.weber@salondigital.de> www.salondigital.de <http://www.salondigital.de> -- Geschäftsführung: Stephan Michalik, Ekkehart Opitz Registergericht: Amtsgericht Hamburg, NR: HRB 78111 NOTE: This communication is confidential and is intended for the use of the individual or entity to which it is directed. It may contain information that is privileged and exempt from disclosure under applicable law. If you are not the intended recipient please notify us immediately. You should not copy it or disclose its contents to any other person.

2 1

Re: [Dovecot] dovecot-1.1.6 fatal error: userdb didn't return a home directory
by JM 04 Nov '08

04 Nov '08

Sorry, doesn't work for SQL, /var/spool/postfix/virtual/~ is pretty useless Nov 4 14:31:04 jm dovecot: IMAP(user@domain): Effective uid=1030, gid=1030, home=domain/user@domain/ Nov 4 14:31:04 jm dovecot: IMAP(user@domain): maildir: data=/var/spool/postfix/virtual/~ Nov 4 14:31:04 jm dovecot: IMAP(user@domain): Thank you for patch, try to use it. On Tue, Nov 4, 2008 at 2:29 PM, Thorsten Vollmer <thorsten(a)thvo.de> wrote: > This error has been corrected: > http://hg.dovecot.org/dovecot-1.1/rev/2fbd36039526 > http://hg.dovecot.org/dovecot-1.1/rev/cbde69815b8a > > On Fri, 2008-10-31 at 18:07 +0200, Timo Sirainen wrote: >> One workaround is to use ~ instead of %h. It'll log errors, but it >> still works. > >

1 0

[Dovecot] dovecot-1.1.6 fatal error: userdb didn't return a home directory
by JM 04 Nov '08

04 Nov '08

dovecot version 1.1.6 >dovecot -n # 1.1.6: /etc/dovecot/dovecot.conf # OS: Linux 2.6.27-gentoo-r1 i686 Gentoo Base System release 2.0.0 xfs base_dir: /var/run/dovecot/ protocols: imap pop3 listen(default): *:143 listen(imap): *:143 listen(pop3): *:110 ssl_disable: yes disable_plaintext_auth: no login_dir: /var/run/dovecot//login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login login_greeting: Server ready. login_process_per_connection: no login_processes_count: 6 mail_privileged_group: vmail mail_uid: vmail mail_gid: vmail mail_location: maildir:/var/spool/postfix/virtual/%h mail_debug: yes fsync_disable: yes maildir_copy_preserve_filename: yes mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugins(default): expire fts fts_squat mail_plugins(imap): expire fts fts_squat mail_plugins(pop3): expire mail_plugin_dir(default): /usr/lib/dovecot/imap mail_plugin_dir(imap): /usr/lib/dovecot/imap mail_plugin_dir(pop3): /usr/lib/dovecot/pop3 imap_client_workarounds(default): delay-newmail imap_client_workarounds(imap): delay-newmail imap_client_workarounds(pop3): pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh auth default: mechanisms: plain login cache_size: 1024 debug: yes passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: sql args: /etc/dovecot/dovecot-sql.conf socket: type: listen master: path: /var/run/dovecot/auth-master mode: 384 user: vmail plugin: expire: Trash 7 Spam 30 expire_dict: proxy::expire fts: squat fts_squat: partial=4 full=10 dict: expire: db:/var/lib/dovecot/expire.db /etc/dovecot/dovecot-sql.conf driver = mysql connect = host=localhost dbname=postfix user=postfix password=**** default_pass_scheme = PLAIN password_query = SELECT username, password FROM mailbox WHERE username = '%u' AND active = '1' user_query = SELECT maildir AS home, 1030 AS uid, 1030 AS gid FROM mailbox WHERE username = '%u' After upgrade from version 1.1.4 to 1.1.6, got following error when dovecot starts * Starting dovecot ... Fatal: userdb didn't return a home directory, but mail location used it (%h): /var/spool/postfix/virtual/%h Error: imap dump-capability process returned 89 Fatal: Invalid configuration in /etc/dovecot/dovecot.conf Mail locations should be /var/spool/postfix/virtual/domain/user@domain/ where %h = domain/user@domain/ Version 1.1.4 works fine with this settings.

2 1

Re: [Dovecot] Issue with domains
by Sahil Tandon 03 Nov '08

03 Nov '08

David M Lemcoe Jr. <mailing(a)ender.ath.cx> wrote: > The MX Record was removed, and now when sending from a seperate e-mail > server, I get an e-mail: > " > The following addresses had delivery problems: > > <mailing(a)lemcoe.com> > Permanent Failure: 554_5.7.1_<mailing(a)lemcoe.com>:_Relay_access_denied > Delivery last attempted at Sun, 2 Nov 2008 20:52:55 -0000 > " > Any ideas? This is not a dovecot problem. Please do not send replies only to me but instead to the appropriate mailing list. I would try the Postfix mailing list for starters. -- Sahil Tandon <sahil(a)tandon.net>

1 0

Re: [Dovecot] Issue with domains
by Jon Fullmer 02 Nov '08

02 Nov '08

It's not clear from your response that you understand why it's failing. It would seem clear that postfix doesn't see this as a local domain. Instead, it thinks you're trying to relay to somewhere else. Check your virtual_mailbox_domains file (or database) and make sure it has an entry for the new domain. Good luck! - Jon On Nov 2, 2008, at 2:30 PM, David M Lemcoe Jr. wrote: > > I just found out that /var/logs IS showing something. > > > Nov 2 16:27:46 ubuntu postfix/smtpd[11635]: connect from > rv-out-0506.google.com[209.85.198.239] > Nov 2 16:27:46 ubuntu postfix/smtpd[11635]: NOQUEUE: reject: RCPT > from > rv-out-0506.google.com[209.85.198.239]: 554 5.7.1 > <mailing(a)lemcoe.com>: > Relay access denied; from=<ki4yj$ > Nov 2 16:27:46 ubuntu postfix/smtpd[11635]: disconnect from > rv-out-0506.google.com[209.85.198.239] > Nov 2 16:27:47 ubuntu postfix/smtpd[11622]: disconnect from > fmailhost06.isp.att.net[207.115.11.56] > > Yes, it was sent from Gmail. > > Thanks for the help. > > > On Sun, 2 Nov 2008 14:26:21 -0700, Jon Fullmer <jon(a)jonfullmer.com> > wrote: >> Does the log show that the incoming messages are actually received? >> If not, it sounds like you're missing an MX record in DNS. If you are >> seeing the message come in, what does the log say it did with it? >> >> - Jon >> >> On Nov 2, 2008, at 1:45 PM, mailing wrote: >> >>> >>> I am using Postfix and /var/logs/mail.log does not have any errors >>> when >>> sending to lemcoe.com >>> >>> Thanks for quick response. >>> >>> On Sun, 2 Nov 2008 13:41:31 -0700, Jon Fullmer <jon(a)jonfullmer.com> >>> wrote: >>>> What are you using as your MTA (i.e., which server is listening for >>>> the incoming SMTP message)? Postfix? Sendmail? >>>> >>>> Have you checked for errors at this level? >>>> >>>> - Jon >>>> >>>> On Nov 2, 2008, at 1:34 PM, David M Lemcoe Jr. wrote: >>>> >>>>> >>>>> I am running Dovecot 1.0.10 and have it working great on >>>>> ender.ath.cx (my >>>>> free DynDNS.com subdomain), but recently I registered lemcoe.com >>>>> and >>>>> pointed it to the same IP address as ender.ath.cx. The problem is, >>>>> only >>>>> e-mail sent to the @ender.ath.cx works. If it is send it to >>>>> @lemcoe.com, I >>>>> don't know where it goes. I get no errors either. >>>>> >>>>> How can I get Dovecot to recognize both domains? >>>>> >>>>> TIA. >>>>> >>>>> David >>>> >>

1 0

Re: [Dovecot] Issue with domains
by Jon Fullmer 02 Nov '08

02 Nov '08

Does the log show that the incoming messages are actually received? If not, it sounds like you're missing an MX record in DNS. If you are seeing the message come in, what does the log say it did with it? - Jon On Nov 2, 2008, at 1:45 PM, mailing wrote: > > I am using Postfix and /var/logs/mail.log does not have any errors > when > sending to lemcoe.com > > Thanks for quick response. > > On Sun, 2 Nov 2008 13:41:31 -0700, Jon Fullmer <jon(a)jonfullmer.com> > wrote: >> What are you using as your MTA (i.e., which server is listening for >> the incoming SMTP message)? Postfix? Sendmail? >> >> Have you checked for errors at this level? >> >> - Jon >> >> On Nov 2, 2008, at 1:34 PM, David M Lemcoe Jr. wrote: >> >>> >>> I am running Dovecot 1.0.10 and have it working great on >>> ender.ath.cx (my >>> free DynDNS.com subdomain), but recently I registered lemcoe.com and >>> pointed it to the same IP address as ender.ath.cx. The problem is, >>> only >>> e-mail sent to the @ender.ath.cx works. If it is send it to >>> @lemcoe.com, I >>> don't know where it goes. I get no errors either. >>> >>> How can I get Dovecot to recognize both domains? >>> >>> TIA. >>> >>> David >>

1 0

[Dovecot] Issue with domains
by David M Lemcoe Jr. 02 Nov '08

02 Nov '08

I am running Dovecot 1.0.10 and have it working great on ender.ath.cx (my free DynDNS.com subdomain), but recently I registered lemcoe.com and pointed it to the same IP address as ender.ath.cx. The problem is, only e-mail sent to the @ender.ath.cx works. If it is send it to @lemcoe.com, I don't know where it goes. I get no errors either. How can I get Dovecot to recognize both domains? TIA. David

3 2

[Dovecot] v1.2.alpha1 released
by Timo Sirainen 02 Nov '08

02 Nov '08

http://dovecot.org/releases/1.2/alpha/dovecot-1.2.alpha1.tar.gz http://dovecot.org/releases/1.2/alpha/dovecot-1.2.alpha1.tar.gz.sig This is the only v1.2.alpha announcement I'm going to send to dovecot-news list. Next announcement will be for either v1.2.beta1 or v1.2.rc1. I'm hoping that v1.2 stabilizes pretty soon. There are no huge changes like there were in 0.99->1.0 or 1.0->1.1, so most of the bugs are probably related to new features. I'm already running v1.2 myself and it's gone through heavy stress testing with my imaptest tool, so I'm expecting it to be stable enough for real world testing with not-all-that-important servers. It's safe to jump between v1.1 and v1.2 at any time or even have them concurrently accessing the same mailboxes. Dovecot v1.2 has a lot of new IMAP extensions implemented. The biggest change comes from CONDSTORE extension which adds a new concept of "modification sequences" (modseq for short). Each message has a modseq that increases whenever a flag is changed or when the message is expunged. The client can keep track of the highest seen modseq and request only changes done since the modseq. See QRESYNC (RFC 5162) for more information. Dovecot starts keeping track of the modseqs only when the first "CONDSTORE/QRESYNC enabling command" is executed. Before that no disk space is used for modseqs. When modseqs are enabled dovecot.index file uses 8 bytes per message more space. Other implemented IMAP extensions are: ESEARCH, SEARCHRES, WITHIN, ID and CONTEXT=SEARCH. Added thread indexes to optimize IMAP THREAD command. Only the first half of threading is currently optimized, the rest will hopefully follow later. Added a non-standard X-REFERENCES2 threading algorithm where threads are sorted by their latest message instead of the thread root message. There is also no base subject merging. This may be renamed and become part of SEARCH=INTHREAD extension some day. SEARCH=INTHREAD is still a draft, but the INTHREAD search key is already implemented by Dovecot v1.2. This is mostly useful with virtual mailboxes. Virtual mailboxes: http://wiki.dovecot.org/Plugins/Virtual Then there are also some internal API changes which will make some things easier. For example lib-storage now allows handling multiple different users at the same time.

6 78

[Dovecot] pam_dovecotpw anybody?
by Steinar Bang 02 Nov '08

02 Nov '08

Samba has pam_smbpass which is a PAM module that hooks into password changing, and changes the users' samba password (presumably used for NTLM auth?), when the users change their ordinary unix/linux password. http://gitweb.samba.org/?p=samba.git;a=tree;f=source3/pam_smbpass;h=c230a1b… It shouldn't bee too hard to take the code from here, combine it with dovecotpw and create a PAM module that changes the dovecot password in a way that can be used for cram-md5. Ideally it should read the /etc/dovecot/dovecot.conf (whereever it is), and find the path of the passwd-file and use that. Has anyone else looked into doing something like this?

1 0

[Dovecot] Backing Up
by Neil 02 Nov '08

02 Nov '08

What is the best way to do a (server-side) backup of all mail in a user's mail? I don't think I'm doing anything weird as far as configs go; here's dovecot -n if it helps: # 1.1.4: /etc/dovecot/dovecot.conf protocols: imaps listen: *, [::] ssl_cert_file: /etc/ssl/dovecot/cert.pem ssl_key_file: /etc/ssl/dovecot/key.pem login_dir: /var/run/dovecot/login login_executable: /usr/libexec/dovecot/imap-login mail_location: maildir:~/.maildir auth default: mechanisms: plain login passdb: driver: pam args: * userdb: driver: passwd socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix

16 28

[Dovecot] feature request for managesieve build from packager
by seriv＠parkheights.dyndns.org 02 Nov '08

02 Nov '08

Hi everybody, dovecot-1.2 alpha3 with cmusieve, libsieve and managesieve are available as rpm packages for Sisyphus repository (http://ftp.altlinux.org/pub/distributions/ALTLinux/Sisyphus, and specs/patches are available at http://git.altlinux.org/people/seriv/packages/?p=dovecot.git and http://git.altlinux.org/people/seriv/packages/?p=dovecot-sieve.git) Thank you very much Timo and Stephan! I have a feature-request for managesieve configure and Makefiles: they depend on dovecot sources as they are used for build process. I think it would be very nice to have not just --with-dovecot parameter in configure parameters, but also --with-dovecot-includes and --with-dovecot-libs. The same about cmusieve plugin: dovecot has --enable-header-install parameter, but installed headers are not sufficient for building cmusieve, I need install libraries and then modify cmusieve's Makefiles by running something like: --- for f in `find . -name Makefile` do mv -f $f $f.orig sed -e's/\$(dovecotdir)\/src$\/lib\/.*\.a$/\$(libdir)\/dovecot\/modules\1/g' \ < $f.orig > $f done --- before make in %build section. -- With best regards, Sergey Ivanov.

1 0

[Dovecot] imap processes eating IO
by Ryan Rawdon 02 Nov '08

02 Nov '08

[Ignore the previous e-mail, I somehow sent it when I was trying to paste from clipboard] I recently migrated my dovecot/postfix setup to a new machine. After doing so, I have encountered a problem where imap processes get stuck in a loop eating loads of IO on the machine. Looking at the trace (snippet below), it looks like they are sitting and reading the inbox and other folders of certain users repeatedly. This seems to be triggered by the delivery of a new e-mail to the user's mailbox while they have an IMAP client connected, though I cannot say for sure. This had never happened before on the old machine. I'm certain more information would be useful, please let me know what I can provide to help! Trace of process 22342 - imap lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203440140.P6242Q0M41485.scarecrow:2,RSc", {st_mode=S_IFREG|0600, st_size=3079, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203446630.P7458Q0M562949.scarecrow:2,Sc", {st_mode=S_IFREG|0600, st_size=27769, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203454830.P9042Q0M402016.scarecrow:2,RSe", {st_mode=S_IFREG|0600, st_size=730534, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203460967.P10096Q0M631472.scarecrow:2,S", {st_mode=S_IFREG|0600, st_size=2690, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203463833.P10601Q0M946162.scarecrow:2,Sbc", {st_mode=S_IFREG|0600, st_size=2319, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203468449.P11425Q0M422185.scarecrow:2,Sc", {st_mode=S_IFREG|0600, st_size=2650, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203469387.P11575Q0M276926.scarecrow:2,Sc", {st_mode=S_IFREG|0600, st_size=1317, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203472851.P12516Q0M604824.scarecrow:2,Sc", {st_mode=S_IFREG|0600, st_size=2491, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203474105.P12705Q0M450957.scarecrow:2,RS", {st_mode=S_IFREG|0600, st_size=1489, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203474330.P12758Q0M302789.scarecrow:2,S", {st_mode=S_IFREG|0600, st_size=1483, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203474352.P12765Q0M853382.scarecrow:2,RS", {st_mode=S_IFREG|0600, st_size=1520, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203475497.P12947Q0M759098.scarecrow:2,RS", {st_mode=S_IFREG|0600, st_size=1554, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203476420.P13131Q0M140164.scarecrow:2,Sc", {st_mode=S_IFREG|0600, st_size=1011, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203477055.P13350Q0M324248.scarecrow:2,S", {st_mode=S_IFREG|0600, st_size=1511, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203485834.P14664Q0M678604.scarecrow:2,RSc", {st_mode=S_IFREG|0600, st_size=2153, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203555290.P27989Q0M937789.scarecrow:2,S", {st_mode=S_IFREG|0600, st_size=2017, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203566780.P29789Q0M486178.scarecrow:2,Sc", {st_mode=S_IFREG|0600, st_size=1570, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1216416810.P17960Q0M786183.tinman:2,S", {st_mode=S_IFREG|0600, st_size=1447, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203567387.P29984Q0M463701.scarecrow:2,Sc", {st_mode=S_IFREG|0600, st_size=1560, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203568156.P30125Q0M174453.scarecrow:2,Sc", {st_mode=S_IFREG|0600, st_size=1570, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203568755.P30222Q0M271021.scarecrow:2,Sc", {st_mode=S_IFREG|0600, st_size=1555, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203578404.P31535Q0M370292.scarecrow:2,Sc", {st_mode=S_IFREG|0600, st_size=1125, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203581122.P31861Q0M954508.scarecrow:2,Sc", {st_mode=S_IFREG|0600, st_size=2108, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203596470.P3307Q0M326986.scarecrow:2,S", {st_mode=S_IFREG|0600, st_size=2738, ...}) = 0 getdents64(12, /* 64 entries */, 4096) = 4096 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203615744.P6582Q0M282341.scarecrow:2,Sc", {st_mode=S_IFREG|0600, st_size=2027, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203619209.P7288Q0M583007.scarecrow:2,Sc", {st_mode=S_IFREG|0600, st_size=8739, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203629165.P9049Q0M921642.scarecrow:2,Sc", {st_mode=S_IFREG|0600, st_size=3049, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203638438.P10774Q0M313047.scarecrow:2,RS", {st_mode=S_IFREG|0600, st_size=8889, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203639137.P10877Q0M554068.scarecrow:2,S", {st_mode=S_IFREG|0600, st_size=9549, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203679395.P16427Q0M89616.scarecrow:2,Sc", {st_mode=S_IFREG|0600, st_size=1364, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203689732.P20116Q0M93680.scarecrow:2,Sbc", {st_mode=S_IFREG|0600, st_size=2440, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203690022.P20155Q0M909689.scarecrow:2,Sbc", {st_mode=S_IFREG|0600, st_size=2303, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203693712.P20948Q0M30023.scarecrow:2,Sc", {st_mode=S_IFREG|0600, st_size=3991, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203693933.P20990Q0M934746.scarecrow:2,Sc", {st_mode=S_IFREG|0600, st_size=2371, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203695416.P21386Q0M135204.scarecrow:2,RS", {st_mode=S_IFREG|0600, st_size=6992, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203698879.P21995Q0M135839.scarecrow:2,Sc", {st_mode=S_IFREG|0600, st_size=1691, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203700228.P22234Q0M28365.scarecrow:2,Sc", {st_mode=S_IFREG|0600, st_size=1013, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203703239.P23143Q0M571200.scarecrow:2,Sc", {st_mode=S_IFREG|0600, st_size=2122, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203704119.P23375Q0M653158.scarecrow:2,Sc", {st_mode=S_IFREG|0600, st_size=2256, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203713490.P25274Q0M840767.scarecrow:2,RSc", {st_mode=S_IFREG|0600, st_size=19577, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203736413.P29935Q0M732560.scarecrow:2,RSc", {st_mode=S_IFREG|0600, st_size=3143, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203802545.P10420Q0M281614.scarecrow:2,Sc", {st_mode=S_IFREG|0600, st_size=2620, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203803404.P10616Q0M912757.scarecrow:2,RSc", {st_mode=S_IFREG|0600, st_size=2622, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203804020.P10721Q0M538580.scarecrow:2,S", {st_mode=S_IFREG|0600, st_size=3003, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203805331.P10980Q0M701431.scarecrow:2,RS", {st_mode=S_IFREG|0600, st_size=2361, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203809386.P25318Q0M128371.scarecrow:2,RSc", {st_mode=S_IFREG|0600, st_size=4004, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203809725.P27021Q0M447783.scarecrow:2,Sc", {st_mode=S_IFREG|0600, st_size=3679, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203813058.P6051Q0M690481.scarecrow:2,Sc", {st_mode=S_IFREG|0600, st_size=816, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203874686.P31025Q0M52827.scarecrow:2,Sc", {st_mode=S_IFREG|0600, st_size=2933, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203892798.P6675Q0M22252.scarecrow:2,RSc", {st_mode=S_IFREG|0600, st_size=2357, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203892996.P6750Q0M114883.scarecrow:2,Sc", {st_mode=S_IFREG|0600, st_size=1561, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203896197.P7621Q0M934348.scarecrow:2,S", {st_mode=S_IFREG|0600, st_size=616, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203896810.P8108Q0M440868.scarecrow:2,RS", {st_mode=S_IFREG|0600, st_size=3620, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203900525.P10657Q0M868027.scarecrow:2,S", {st_mode=S_IFREG|0600, st_size=6304, ...}) = 0 lstat64("/home/vmail/u13.net/ryan/Maildir/cur/1203902148.P10984Q0M386235.scarecrow:2,S", {st_mode=S_IFREG|0600, st_size=3086, ...}) = 0

3 6