- dovecot - dovecot.org

[Dovecot] Quota Display with Horde / IMP ( WebMail Client )
by edwardspl＠ita.org.mo 11 Oct '07

11 Oct '07

Dear All, For the Dovecot.conf : protocol imap { mail_plugins = quota imap_quota mail_plugin_dir = /usr/lib/dovecot/imap } plugin { quota = maildir } For /var/spool/mail : -rw------- 1 root root 7168 Sep 24 23:02 aquota.group -rw------- 1 root root 8192 Sep 24 18:05 aquota.user -rw------- 1 edward mail 301709 Sep 24 23:27 edward But the Quota display is un-limited status... So, what mistake about the config ? Mine is FC6 System ! Thanks ! Edward.

3 2

[Dovecot] GSSAPI Cross-Realm Patch
by Zachary Kotlarek 11 Oct '07

11 Oct '07

I've written a GSSAPI cross-realm auth patch for people not lucky enough to have the __gss_userok function, though it should apply pretty cleanly with that patch in place as well. The patch is available at: http://zinux.cynicbytrade.com/svn/servers/dovecot/cross-realm.diff.bz2 It works for me on MIT-kerb, and I tested compilation against heimdal, but I don't have a cross-realm setup to test functionality under heimdal (though I also have no reason to think it wouldn't work). Since neither MIT nor heimdal provide a gss_userok() function, I used the krb5_userok() function. So if you're using a mechanism other than krb5 this won't work. But it's the same thing that OpenSSH and the apps distributed with heimdal do, so it seemed relatively safe. I also choose to append the krb5_userok() check rather than replace the gss_compare_name() check -- that way same-realm auth works for non-krb5 mechanisms, and my new code doesn't get called unless the same-realm check fails. If you don't care about other mechanisms it would be faster to bypass the gss_compare_name() check entirely. If this is something you'd like to mainline I'd be happy to standardize the coding style -- just point me to a style definition document. And if it doesn't hit the mainline I expect to maintain it for the foreseeable future, with updates at the same URL. Zach

1 0

[Dovecot] Dovecot, postifx, virtual domains and deliver, what about luser_relay/fallback_relay?
by Alexander Hoogerhuis 10 Oct '07

10 Oct '07

I've read documentation (obviously not the right parts) and googled, but I can't seem how to solve this simple problem: I have a machine running postfix/dovecot and using virtual domains, delivery happens with dovecot's LDA. I also have an Exchange machine that I have to house some of the users of a given domain. How can I tell either postifx in general or dovecot's LDA that whatever specific user that cannot be found in the virutal setup can be pawned off to a given relay-server which will sort it out? -A

2 1

[Dovecot] FW: IMAP proxy with dovecot and hostname
by Limperis Antonis 10 Oct '07

10 Oct '07

Good morning dovecot users I read in http://wiki.dovecot.org/PasswordDatabase/ExtraFields/Proxy that dovecot need ip address in host field and then "This field is required. Note that currently it's required to use an IP address since no DNS resolving is done.". I use a qmail cluster and Courier IMAP. In this system used the ldap field mailhost for proxy functionality with dns name as value. Is there a plan to add the DNS resolving to dovecot in host field; Is there any patch; Thanks Antonis

3 2

[Dovecot] User database ldap lookups and sasl
by Olivier Castan 10 Oct '07

10 Oct '07

Hello I'm currently trying to use Active Directory with Unix extensions to store UID, GID and homedir and retrieve them with ldap. I don't want to allow anonymous bindings and I would rather not use TLS and manage a PKI. So I'm trying to use SASL to do a Kerberos authentication for Dovecot against AD LDAP. I'm currently getting GSSAPI errors about the lack of "credentials cache". Looking at similar cases where services act as clients, like using nss_ldap for unix host accounts, I understand the credentials cache should be initiated by an external program (cron and startup script), at least with the TGT and maybe the TGS for ldap. Since usually kerberosv5 cache is based on the user id ( /tmp/krb5cc_0 for root) there's an option in ldap.conf (krb5_ccname) to set the filename (/etc/.ldapcache in nss_ldap tutorials) for this cache. Is there any way to do this with dovecot-ldap.conf or should I try to use "auth user" default cache filename ? Thanks in advance

1 0

[Dovecot] SpamAssassin and Public Namespace
by James 10 Oct '07

10 Oct '07

Hi I know i might get flamed for asking this in the dovecot mailing list instead of the spamassassin one but i thought someone might be kind enough to help anyway. TIA I'm trying to do site-wide spam filtering with a public namespace but it's not reading the folder i have in the public namespace This is the public namespace set in my dovecot.conf #public spam folder namespace public { separator = / prefix = Filter/ location = maildir:/home/vmail/domains/Spam/Maildir/ hidden = no } There's also a .Spam and .Non-spam folder created in that directory server:/home/vmail/domains/Spam/Maildir# ls -al total 32 drwxrwxrwx 7 vmail vmail 4096 2007-10-09 10:35 . drwxrwxrwx 3 vmail vmail 4096 2007-10-05 13:23 .. drwx------ 2 vmail vmail 4096 2007-10-09 10:35 cur drwx------ 2 vmail vmail 4096 2007-10-09 10:35 new drwxrwxrwx 5 vmail vmail 4096 2007-10-09 11:20 .Non-Spam drwxrwxrwx 5 vmail vmail 4096 2007-10-09 11:19 .Spam -rw------- 1 vmail vmail 14 2007-10-08 11:58 subscriptions drwx------ 2 vmail vmail 4096 2007-10-09 10:35 tmp I'm trying to use this script to login and get the spam from the public spam folders and send it to spamassassin to learn I've highlighted the important parts There are 13 messages in Spam There are 5 messages in Non-Spam Here's the script: ######################################################################################### #!/usr/bin/perl # # Process mail from imap server shared folder 'spam' & 'not-spam' through spamassassin sa-learn # dmz(a)dmzs.com - March 19, 2004 # http://www.dmzs.com/tools/files/spam.phtml # LGPL # # Things to try if it doesn't work # 1) Turn debug onto 1 and see if you connect to imap server ad get messages (yes i could have made a command line flag, just didn't see the need once I got it working :) # 2) Check your local.cf for spamassassin (in debian it's /etc/spamassassin/local.cf) bayes_path settings. # # Also be sure to check that your spamassassin is truely using the bayes files (-D manual startup of spamd to debug there) # use Mail::IMAPClient; use IO::Socket::SSL; my $debug=1; my $salearn; my $username = 'user'; my $password = 'password'; my $server = 'server.example.com'; my $ssl=new IO::Socket::SSL("$server:imaps"); die ("Error connecting - $@") unless defined $ssl; $ssl->autoflush(1); my $imap = Mail::IMAPClient->new( #Server=> 'imapmailhost:143', Socket => $ssl, User => $username, Password => $password, Debug => $debug ); if (!defined($imap)) { die "IMAP Login Failed"; } # If debugging, print out the total counts for each mailbox if ($debug) { foreach my $foldername ($imap->folders) { my $number_of_messages = $imap->message_count( $foldername ); print $foldername, " is imap folder\n"; }* my $spamcount = $imap->message_count('Filter/Spam');* print $spamcount, " Spam to process\n"; * my $nonspamcount = $imap->message_count('Filter/Non-Spam');* print $nonspamcount, " Notspam to process\n" if $debug; } # Process the spam mailbox *$imap->select('Filter/Spam');* my @msgs = $imap->search("ALL"); for (my $i=0;$i <= $#msgs; $i++) { # I put it into a file for processing, doing it into a perl var & piping through sa-learn just didn't seem to work $imap->message_to_file("/tmp/salearn",$msgs[$i]); # execute sa-learn w/data # if ($debug) { $salearn = `/usr/bin/sa-learn -D --no-sync --showdots --spam /tmp/salearn`; } # else { $salearn = `/usr/bin/sa-learn --no-sync --showdots --spam /tmp/salearn`; } print "-------\nSpam: ",$salearn,"\n-------\n" if $debug; # delete processed message $imap->delete_message($msgs[$i]); unlink("/tmp/salearn"); } $imap->expunge(); $imap->close(); # Process the not-spam mailbox *$imap->select('Filter/Non-spam');* my @msgs = $imap->search("ALL"); for (my $i=0;$i <= $#msgs; $i++) { $imap->message_to_file("/tmp/salearn",$msgs[$i]); # execute sa-learn w/data # if ($debug) { $salearn = `/usr/bin/sa-learn -D --no-sync --showdots --ham /tmp/salearn`; } # else { $salearn = `/usr/bin/sa-learn --no-sync --showdots --ham /tmp/salearn`; } print "-------\nNotSpam: ",$salearn,"\n-------\n" if $debug; # delete processed message $imap->delete_message($msgs[$i]); unlink("/tmp/salearn"); } $imap->expunge(); $imap->close(); $imap->logout(); # integrate learned stuff my $sarebuild = `/usr/bin/sa-learn --sync`; print "-------\nRebuild: ",$sarebuild,"\n-------\n" if $debug; ######################################################################################### Results: server:/home/james# ./DMZS-sa-learn.pl Using Mail::IMAPClient version 2.2.9 and perl version 5.8.8 (5.008008) Spam to process Notspam to process . ------- Spam: Learned tokens from 0 message(s) (1 message(s) examined) ------- Autoloading: UID store +FLAGS.SILENT (\Deleted) . ------- NotSpam: Learned tokens from 1 message(s) (1 message(s) examined) ------- Autoloading: UID store +FLAGS.SILENT (\Deleted) ------- Rebuild: bayes: synced databases from journal in 0 seconds: 4 unique entries (4 total entries) -------

1 1

[Dovecot] Dovecot hanging up with many defunct processes
by Mayank Joshi 09 Oct '07

09 Oct '07

Hi, I am in a very awkward situation and need some kind of immediate fix up. I had installed dovecot in my organization as part of migration of email server. The setup involves sendmail, dovecot (imaps+pop3s) and webmail (squirrelmail) running on apache webserver. All was working fine until one day I found a lot of defunct processes on system related to dovecot. dovecot-auth, imap-login and imap were all defunct. The system is using pam_ldap and nss_ldap to authenticate users to a Windows 2003 Active Directory. Immediate restart of dovecot solved the problem for me that day, however since then it's been about 3 times that I've faced this problem. After visiting various forums I came to know one thing, that it has something to do with pam_ldap and nss_ldap. However with UW-IMAP we were using the same setup and we didn't find any problems there. It would be very kind of you, if you can help me out on this front as apart from these mishaps the mail server is running perfectly fine and we wish to continue using Dovecot for our setup in future as well. Following is the system details: 1) OS: RHEL4 (Kernel - 2.6.9-5.ELsmp) 2) Dovecot: Dovecot (Version - 1.0.3) 3) Following is dovecot configuration: log_path: /var/log/dovecot.log protocols: imaps pop3s ssl_cert_file: /usr/share/ssl/certs/imapd.pem ssl_key_file: /usr/share/ssl/private/imapd.pem login_dir: /usr/local/var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login max_mail_processes: 10240 mail_location: mbox:~/mail:INBOX=/var/mail/%u mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 pop3_uidl_format(default): pop3_uidl_format(imap): pop3_uidl_format(pop3): %08Xu%08Xv auth default: passdb: driver: pam userdb: driver: passwd 4) Dovecot's PAM file (/etc/pam.d/dovecot) #%PAM-1.0 auth required pam_ldap.so account required pam_ldap.so session required pam_mkhomedir.so skel=/etc/skel umask=0077 session required pam_ldap.so As far as I feel it's problem with pam_ldap not able to authenticate against Windows 2003 Active Directory due to some reason or the other. However I'm not sure why is this happening. Regards, Mayank Joshi.

3 2

[Dovecot] undelete messages?
by Cory Coager 08 Oct '07

08 Oct '07

I'm using the lazy expunge plugin as configured in: http://wiki.dovecot.org/Plugins/Lazyexpunge The page claims users can undelete messages without assistance from a sysadmin. How is this accomplished? When I try to subscribe to the folders under the EXPUNGED namespace, nothing happens. ~Cory Coager

2 4

[Dovecot] global sieve script
by Jorge Salamero Sanz 08 Oct '07

08 Oct '07

hi all, i'm moving from a maildrop+courier setup to lda(sieve)+dovecot setup. with maildrop i had a global filter for all the users, so i could filter and archive into the spam folder spam tagged emails for users without custom filters, including them if they exist: LOGNAME=tolower($LOGNAME) `test -e $LOGNAME` if ( $RETURNCODE != 0 ) { `maildirmake $LOGNAME` `maildirmake $LOGNAME/._spam` } `test -f $LOGNAME/mailfilter` if ( $RETURNCODE == 0 ) { include "$LOGNAME/mailfilter" } if ( /^X-Spam-Status: YES */) { to "$LOGNAME/._spam" } else { to "$LOGNAME/" } how could i get this behaviour with dovecot lda and sieve ? thanks !

3 2

Re: [Dovecot] Moving email from a folder to another using IMAP isvery slow (sometimes)
by Stefano Scalise 08 Oct '07

08 Oct '07

Hi to all, I can confirm that if I downgrade to 1.0.5 version I have no more the slowness problem. Then I think it is a bug introduced in th 1.1.x releases. Stefano. ----- Original Message ----- From: "Stefano Scalise" <s.scalise(a)tno.it> To: "Stefano Scalise" <s.scalise(a)tno.it>; "Timo Sirainen" <tss(a)iki.fi> Cc: <dovecot(a)dovecot.org> Sent: Tuesday, October 02, 2007 12:04 PM Subject: Re: [Dovecot] Moving email from a folder to another using IMAP isvery slow (sometimes) > Hi to all, > > very strange! I tried to debug why imap process takes 100% CPu and it is > very slow when I move an email from an imap folder to another imap folder > and then I typed: > > strace -tt -o /log-imap.txt -p <process number> > > well, during the trace the imap process doesn't crash and it is very fast. > If I stop the tracing, I have again the problem and sometimes the crash of > the process. > > Any help? > Thank you, > Stefano. > > ----- Original Message ----- > From: "Stefano Scalise" <s.scalise(a)tno.it> > To: "Timo Sirainen" <tss(a)iki.fi> > Cc: <dovecot(a)dovecot.org> > Sent: Monday, October 01, 2007 4:21 PM > Subject: Re: [Dovecot] Moving email from a folder to another using IMAP > isvery slow (sometimes) > > >> Sorry, but with the new version (1.1.beta2), I still have the same >> problem of very slowness during moving email between two imap folders. >> What can I do for debugging it? >> Stefano. >> >> ----- Original Message ----- >> From: "Timo Sirainen" <tss(a)iki.fi> >> To: "Stefano Scalise" <s.scalise(a)tno.it> >> Cc: <dovecot(a)dovecot.org> >> Sent: Sunday, September 30, 2007 1:52 PM >> Subject: Re: [Dovecot] Moving email from a folder to another using IMAP >> isvery slow (sometimes) >> >> On Wed, 2007-09-26 at 12:05 +0200, Stefano Scalise wrote: >>> Update to the problem: >>> >>> I tried to stress the server with many moving and I received: >>> >>> Sep 26 10:56:40 sirio3 dovecot: IMAP(<email_address>): Trying to >>> allocate 0 >>> bytes >> >> This should fix it: http://hg.dovecot.org/dovecot/rev/c6b85cf1e63a >> >> I'll probably make a beta2 release today after fixing several other >> things. >> >> >

1 0

[Dovecot] User database ldap lookups and sasl
by olivier castan 08 Oct '07

08 Oct '07

Hello I'm currently trying to use Active Directory with Unix extensions to store UID, GID and homedir and retrieve them with ldap I don't want to allow anonymous bindings and I would rather not use TLS and manage a PKI. So I'm trying to use SASL to do a Kerberos authentication for Dovecot against AD LDAP. I'm currently getting GSSAPI errors about the lack of "credentials cache". Looking at similar cases where services act as clients, like using nss_ldap for unix host accounts, I understand the credentials cache should be initiated by an external program (cron and startup script), at least with the TGT and maybe the TGS for ldap. Since usually kerberosv5 cache is based on the user id ( /tmp/krb5cc_0 for root) there's an option in ldap.conf (krb5_ccname) to set the filename (/etc/.ldapcache in nss_ldap tutorials) for this cache. Is there any way to do this with dovecot-ldap.conf or should I try to use "auth user" default cache filename ? Thanks in advance

1 0

[Dovecot] quota exceeded not showing email address
by JC 07 Oct '07

07 Oct '07

Hi everyone, I have a mail server with postfix 2.3.8-2, dovecot 1.0.0 and mysql with virtual users and domains. Everything is working but when a mail bounces it doesn't show me what is the email address with overquota. I'm using Dovecot Delivery Agent to send a mail when an email bounces. This is the message that shows me: Your message was automatically rejected by Dovecot Mail Delivery Agent. The following reason was given: Quota exceeded It doesn't show me what is the email address. In my /etc/postfix/master.cf I added this: dovecot unix - n n - - pipe flags=DRhu user=xyz:xyz argv=/usr/lib/dovecot/deliver -d ${recipient} In my /etc/postfix/main.cf I added this: dovecot_destination_recipient_limit = 1 virtual_transport = dovecot In my /etc/dovecot/dovecot.conf : protocol lda { postmaster_address = <postmaster-address> auth_socket_path = /var/run/dovecot/auth-master } ... user = xyz socket listen { master { path = /var/run/dovecot/auth-master mode = 0660 user = xyz group = xyz } } What should i have to show the email address?

1 0

Re: [Dovecot] Postfix with Deliver (LDA) - user unknown
by Branislav Baca 06 Oct '07

06 Oct '07

Glenn wrote: > Howdy BB! Hopefully this helps to answer your questions... > > /etc/mail/postfix/vmailboxes contains: > > test(a)geekinetdev.com test/ > > /etc/passwd contains: > > test:*:5000:5000:test account for email:/var/mailboxes/test:/nonexistent probably you need here to have a full user@domain name. i.e: test@geekinetdev.com:*:5000:5000:test account for email:/var/mailboxes/test:/nonexistent > > The reason for the virtual_* stuff is that I am testing each program > configuration as I set up a new SMTP server. The goal is to move all > the virtual_* settings to MySQL. However, I want to walk before I run. > Not sure if that is part of my problem.?. Of course, you can leave it there, I've just said it is not necessary for dovecot to work. Also try to avoid using mysql, except you have dedicated mysql server or playing on small site with a lot of RAM. This is by my own experiences. LDAP is probably better solution but more complex to setup. > > Thanks for your assistance! > > glenn > > > Branislav Baca wrote: >> You have set in the main.cf: >> virtual_mailbox_maps = hash:/etc/mail/postfix/vmailboxes >> but dovecot deliver is using userdb for this purpose, which you have >> set to >> passwd. Have you equivalent data in both places? Similary nearly all >> configuration parameters in the main.cf of the postfix starting with >> virtual_??? are not required, but should be provided by userdb for >> dovecot >> deliver. >> >> BB >> >> On 1:26 04/10/07 "Karin Gregorec" <karinnv1(a)gmail.com> wrote: >>> Good Day All! I am attempting to configure deliver as our LDA. I am >>> also configuring the server to use Postfix instead of Sendmail. I >>> have followed the all the documentation and examples I could find. >>> >>> Below are my Dovecot and Postfix configs. Can someone please smack me >>> upside the head and tell me why I am getting "user unknown" errors? >>> If i don't use deliver as the LDA, all works perfectly. Help... >>> >>> TIA, >>> glenn >>> >>> ========== >>> >>> >>> *** Dovecot Config *** >>> >>> dovecot -n >>> # 1.0.5: /usr/local/etc/dovecot.conf >>> base_dir: /var/run/dovecot/ >>> log_path: /var/log/maillogs/dovecot.log >>> protocols: imap imaps pop3 pop3s >>> ssl_cipher_list: ALL:!LOW >>> disable_plaintext_auth: no >>> verbose_ssl: yes >>> login_dir: /var/run/dovecot/login >>> login_executable(default): /usr/local/libexec/dovecot/imap-login >>> login_executable(imap): /usr/local/libexec/dovecot/imap-login >>> login_executable(pop3): /usr/local/libexec/dovecot/pop3-login >>> login_greeting: GID Ready >>> login_log_format_elements: user=<%u> service=%s authMethod=%m rIP=%r >>> lIP=%l encryption=%c >>> login_max_processes_count: 256 >>> verbose_proctitle: yes >>> first_valid_uid: 5000 >>> last_valid_uid: 10000 >>> first_valid_gid: 0 >>> mail_extra_groups: mail >>> mail_location: maildir:~/Maildir >>> dotlock_use_excl: yes >>> fsync_disable: yes >>> maildir_copy_with_hardlinks: yes >>> mail_executable(default): /usr/local/libexec/dovecot/imap >>> mail_executable(imap): /usr/local/libexec/dovecot/imap >>> mail_executable(pop3): /usr/local/libexec/dovecot/pop3 >>> mail_process_size: 1024 >>> mail_plugins(default): quota imap_quota >>> mail_plugins(imap): quota imap_quota >>> mail_plugins(pop3): >>> mail_plugin_dir(default): /usr/local/lib/dovecot/imap >>> mail_plugin_dir(imap): /usr/local/lib/dovecot/imap >>> mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 >>> imap_client_workarounds(default): delay-newmail outlook-idle >>> netscape-eoh tb-extra-mailbox-sep >>> imap_client_workarounds(imap): delay-newmail outlook-idle netscape-eoh >>> tb-extra-mailbox-sep >>> imap_client_workarounds(pop3): outlook-idle >>> pop3_uidl_format(default): >>> pop3_uidl_format(imap): >>> pop3_uidl_format(pop3): %08Xu%08Xv >>> pop3_client_workarounds(default): >>> pop3_client_workarounds(imap): >>> pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh >>> pop3_logout_format(default): top=%t/%p, retr=%r/%b, del=%d/%m, size=%s >>> pop3_logout_format(imap): top=%t/%p, retr=%r/%b, del=%d/%m, size=%s >>> pop3_logout_format(pop3): top=%t/%T, retr=%r/%R, del=%d/%m, size=%s >>> auth default: >>> cache_size: 1024 >>> cache_ttl: 604800 >>> verbose: yes >>> passdb: >>> driver: pam >>> args: cache_key=%Lu >>> userdb: >>> driver: passwd >>> socket: >>> type: listen >>> master: >>> path: /var/run/dovecot/auth-master >>> mode: 384 >>> user: maildrop >>> plugin: >>> quota: maildir:storage=10000000:ignore=Trash >>> >>> >>> *** Postfix main.cf *** >>> >>> alias_database = hash:/etc/mail/postfix/aliases >>> alias_maps = hash:/etc/mail/postfix/aliases >>> biff = no >>> command_directory = /usr/local/sbin >>> daemon_directory = /usr/local/libexec/postfix >>> >>> debug_peer_level = 2 >>> debugger_command = >>> PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont; >>> echo where) | gdb $daemon_directory/$process_name $process_id 2>&1 >>> > $config_directory/$process_name.$process_id.log & sleep 5 >>> >>> #### Dovecot LDA Service - http://wiki.dovecot.org/LDA/Postfix >>> dovecot_destination_recipient_limit = 1 >>> >>> home_mailbox = Maildir/ >>> html_directory = no >>> inet_interfaces = all >>> mail_owner = postfix >>> mail_spool_directory = /var/mail >>> mailq_path = /usr/local/bin/mailq >>> manpage_directory = /usr/local/man >>> message_size_limit = 12000000 >>> mydestination = $myhostname, localhost.$mydomain, localhost >>> mydomain = geekinternetdevelopment.com >>> myhostname = superman.geekinternetdevelopment.com >>> mynetworks = 72.18.193.0/24, 127.0.0.0/8 >>> newaliases_path = /usr/local/bin/newaliases >>> queue_directory = /var/spool/postfix >>> readme_directory = no >>> sample_directory = /usr/local/etc/postfix >>> sendmail_path = /usr/local/sbin/sendmail >>> setgid_group = maildrop >>> smtpd_banner = $myhostname NO WHAMMIES!!! >>> >>> virtual_gid_maps = static:5000 >>> virtual_mailbox_base = /var/mailboxes >>> virtual_mailbox_domains = hash:/etc/mail/postfix/vdomains >>> virtual_mailbox_maps = hash:/etc/mail/postfix/vmailboxes >>> virtual_minimum_uid = 1000 >>> virtual_transport = dovecot >>> virtual_uid_maps = static:5000 >>> unknown_local_recipient_reject_code = 550 >>> >>> *** Postfix master.cf *** >>> ...snip... >>> dovecot unix - n n - - pipe >>> flags=DRhu user=maildrop:maildrop >>> argv=/usr/local/libexec/dovecot/deliver -e -d ${recipient} > >

1 0

[Dovecot] dovecot cloning mails?
by Andreas Schneider 06 Oct '07

06 Oct '07

Hi, I have a strange issue here. I have a large message of a svn commit and the message is cloning itself more and more. I've deleted it several time completely but it doesn't go away. http://www.cynapses.org/tmp/dovecot.png How can I debug it? Thanks, -- andreas milliways:~ # dovecot -n # 1.0.5: /etc/dovecot/dovecot.conf base_dir: /var/run/dovecot/ log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap imaps managesieve listen(default): * listen(imap): * listen(managesieve): *:2000 ssl_ca_file: /etc/ssl/certs/cacert.pem ssl_cert_file: /etc/ssl/certs/milliways.pem ssl_key_file: /etc/ssl/private/milliways.key login_dir(default): /var/run/dovecot//login login_dir(imap): /var/run/dovecot//login login_dir(managesieve): login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(managesieve): /usr/lib/dovecot/managesieve-login first_valid_uid: 150 last_valid_uid: 150 mail_extra_groups: mail mail_location: maildir:/srv/mail/%u maildir_copy_with_hardlinks: yes mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(managesieve): /usr/lib/dovecot/managesieve mail_plugins(default): dspam mail_plugins(imap): dspam mail_plugins(managesieve): mail_plugin_dir(default): /usr/lib64/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib64/dovecot/modules/imap mail_plugin_dir(managesieve): /usr/lib64/dovecot/modules/managesieve auth default: passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: sql args: /etc/dovecot/dovecot-sql.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vmail group: mail plugin: dspam_spamfolder: Junk -- http://www.cynapses.org/ - cybernetic synapses

2 2

[Dovecot] Strange errors
by Ralf Hildebrandt 06 Oct '07

06 Oct '07

One of our users seems to have strange problems with his mailbox: Oct 2 00:36:42 postamt dovecot: IMAP(rbxxxx): Corrupted transaction log file /home/r/b/rbxxxx/Maildir/.listen.CCL/dovecot.index.log: Append with UID 1096, but next_uid = 1097 Oct 2 00:36:42 postamt dovecot: IMAP(rbxxxx): Corrupted transaction log file /home/r/b/rbxxxx/Maildir/.listen.CCL/dovecot.index.log: Append with UID 1096, but next_uid = 1097 Oct 2 00:36:42 postamt dovecot: IMAP(rbxxxx): Unexpected transaction log desync with index /home/r/b/rbxxxx/Maildir/.listen.CCL/dovecot.index Oct 2 00:36:42 postamt dovecot: IMAP(rbxxxx): Transaction log file /home/r/b/rbxxxx/Maildir/.listen.CCL/dovecot.index.log: marked corrupted Oct 2 02:40:54 postamt dovecot: IMAP(rbxxxx): Unlinked a duplicate: 1191278050.P11797Q0M631938.postamt.charite.de,S=3164:2, Oct 2 02:40:54 postamt dovecot: IMAP(rbxxxx): Maildir /home/r/b/rbxxxx/Maildir/.listen.CCL sync: UID inserted in the middle of mailbox (1097 > 1096, file = 1191278202.P12120Q0M512940.postamt.charite.de,S=5349:2,) Oct 2 13:46:12 postamt dovecot: IMAP(rbxxxx): Corrupted transaction log file /home/r/b/rbxxxx/Maildir/.listen.jmol/dovecot.index.log: Append with UID 570, but next_uid = 571 Oct 2 13:46:12 postamt dovecot: IMAP(rbxxxx): Transaction log file /home/r/b/rbxxxx/Maildir/.listen.jmol/dovecot.index.log: marked corrupted Oct 2 13:46:12 postamt dovecot: IMAP(rbxxxx): Unlinked a duplicate: 1191322757.P13572Q0M515987.postamt.charite.de,S=3982:2,a Oct 2 13:46:12 postamt dovecot: IMAP(rbxxxx): Maildir /home/r/b/rbxxxx/Maildir/.listen.jmol sync: UID inserted in the middle of mailbox (571 > 570, file = 1191325571.P17909Q0M852537.postamt.charite.de,S=5674:2,) This is dovecot 1.0.5. -- Ralf Hildebrandt (Ralf.Hildebrandt(a)charite.de) plonk(a)charite.de Postfix - Einrichtung, Betrieb und Wartung Tel. +49 (0)30-450 570-155 http://www.arschkrebs.de Never underestimate the bandwidth of a station wagon full of tapes. -- Dr. Warren Jackson, Director, UTCS

2 2

[Dovecot] Timeout leak
by Lars Stavholm 06 Oct '07

06 Oct '07

In my development environment I sometimes get: dovecot: IMAP(stava): Timeout leak: 0x4425d0 Does anyone know what it means or how I can use this information? Cheers /Lars

2 2

[Dovecot] Corrupt Message?
by Daniel Watts 06 Oct '07

06 Oct '07

Dear List, Am accessing dovecot imap through squirrelmail. Squirrelmail paginates the message list into pages. All works fine except for the page one particular email is in. When I try to open that page (or in fact click 'show all') the server returns: ERROR: Bad or malformed request. Query: FETCH 549,551,555:557,563,565,567:569 (FLAGS UID RFC822.SIZE INTERNALDATE BODY.PEEK[HEADER.FIELDS (Date To Cc From Subject X-Priority Importance Priority Content-Type)]) Server responded: No mailbox selected. Could you possibly let me know what I should do and also how I can find the guilty mail file from that error? Can I just delete the email? Or is there a nice script to repair a dovecot maildir? Many thanks for your advice, Daniel -- Squirrelmail Stable 1.4.8 PHP 5.x Hardened with Eaccelerator Apache 2.x Imapproxy over Dovecot/Maildir all running on Gentoo Linux for ~5,000 users.

2 2

[Dovecot] How to upgrade a running Dovecot?
by Mike Brudenell 06 Oct '07

06 Oct '07

Greetings - Could someone confirm how to perform various upgrades on a live system running Dovecot please? Scenario 1: Change to dovecot.conf =================================== If I make a change to dovecot.conf am I right in thinking I can simply send a HUP signal to the main dovecot process to get it to re- read the configuration file and act on its revised content? Scenario 2: Altered SSL Certificates ===================================== I need to replace our current certificates and have prepared new files containing the replacement certificate and private key. Am I right in thinking that I can simply modify dovecot.conf to point at the new files and send a HUP signal to dovecot? Specifically, will new connections use the revised certificates, and existing connections continue to work OK without interruption? Scenario 3: Software Upgrade ============================= I build a particular version of Dovecot into the tree /usr/local/ dovecot-A.B.C and then have a symlink called "dovecot" pointing at the this directory. To upgrade I can then build the new version into /usr/local/dovecot-X.Y.Z and test. To actually switch over the live service to the new X.Y.Z version do I need to: a) Totally shut down the old A.B.C version of Dovecot, thereby breaking all open connections for users? or b) Assuming I am using "shutdown_clients = no" can I just kill the master "dovecot" process and then start up the new version? Ideally I want existing connections to remain running, but new connections to start up using the new X.Y.Z version of Dovecot. The comment for "shutdown_clients" implies this, but also says: "This however means that after master process has died, the client processes can't write to log files anymore." So if I understand this correctly then with "shutdown_clients = no" in force then the sequence and behaviour is this? ... 1. Old version A.B.C of Dovecot running, clients can log through the master "dovecot" process to the logfiles. 2. Kill the old master "dovecot" process, start new X.Y.Z version up. 3. New connections get served by version X.Y.Z. Old connections DON'T get killed and can continue, BUT can no longer write anything to the logfiles? With many thanks, Mike B-) -- The Computing Service, University of York, Heslington, York Yo10 5DD, UK Tel:+44-1904-433811 FAX:+44-1904-433740 * Unsolicited commercial e-mail is NOT welcome at this e-mail address. *

2 1

[Dovecot] "Corrupted index cache file" error (Dovecot 1.0.3)
by Mike Brudenell 06 Oct '07

06 Oct '07

Greetings - Now that users are beginning to pile up more on our new Dovecot-based IMAP service I'm seeing a small number of entries like this in the logfiles: Corrupted index cache file /mailstore/index/o/ozw100/.INBOX/ dovecot.index.cache : invalid record size We are using Dovecot 1.0.3 with Maildir folders served over NFS from NetApp filers, but the index files are stored on local disk. By "a small number" I mean 4 or 5 on each of our two IMAP servers since midnight. * Should I be worried? * Is there anything I need to do fix the files? (I'm guessing not as no problem reports have come in, and the logs show the people affected continuing to work throughout the day.) * Would upgrading to 1.0.5 help? (I couldn't see anything in the Release Notes for either 1.0.4 or 1.0.5 about this) Cheers, Mike B-) -- The Computing Service, University of York, Heslington, York Yo10 5DD, UK Tel:+44-1904-433811 FAX:+44-1904-433740 * Unsolicited commercial e-mail is NOT welcome at this e-mail address. *

3 2

[Dovecot] Custom password encryption scheme, how to do it?
by Madison Kelly 06 Oct '07

06 Oct '07

Hi all, I'm a fairly recent convert to Dovecot/Postfix from Sendmail, so please be gentle (and assume I know nothing). :) I've got a Postfix/Dovecot/PostgreSQL setup with a custom DB schema for my email. This database is also used for a bigger program I use for all my hosting needs (domains, etc.). Currently, I've set it up to use plain-text authentication while I was developing it and getting things running. Now though it's up and running fine, so I want to increase the strength of my passwords that Postfix/Dovecot use. I currently have two fields in a table called 'users'; 'usr_password' which is plain-text and what Postfix/Dovecot currently use and 'usr_strong_password', which stores a stronger hash and is used by the main program. My question is, can I have Postfix/Dovecot use a custom password hashing system? The way I store my strong password (as used by the web-interface) is; - Take the password provided from the user - Read a stored 'salt' value from the database (unique per user and changed on password [re]sets). - Generate an initial SHA256 hash out of the password+salt. - Re-hash the initial SHA256 hash many thousands of times. - Compare the final hash with the hash stored in 'usr_strong_password'. If I can tell Dovecot how to do this, where would I do it? Is there a document/howto/etc someone could point me to? Is there a file I should look at? Thanks all!! Madi

3 3

[Dovecot] saslauth for digest or cram-md5?
by Knute Johnson 06 Oct '07

06 Oct '07

Is it possible to use saslauth for digest-md5 or cram-md5 authentication? If so how would one go about configuring dovecot? Thanks, -- Knute Johnson Molon Labe...

2 1

[Dovecot] imap sort assertion failure
by Andrew Garner 06 Oct '07

06 Oct '07

The following error occurred after a "SORT (TO) US-ASCII ALL" command. This only seems to happen with "to", all our other tests work as expected. Oct 1 20:32:49 dovecot: IMAP(example(a)example.com): pool_data_stack_realloc(): stack frame changed Oct 1 20:32:49 dovecot: IMAP(example(a)example.com): Raw backtrace: imap [0x80c5ed1] -> imap [0x80c5dec] -> imap [0x80cde63] -> imap [0x80c43c0] -> imap(buffer_write+0x85) [0x80c46f5] -> imap(buffer_append+0x26) [0x80c4766] -> imap [0x80be2f5] -> imap(message_header_decode+0x75) [0x80be3d5] -> imap(message_header_decode_utf8+0x56) [0x80be5f6] -> imap [0x80903c4] -> imap(index_mail_get_first_header+0x3e) [0x809125e] -> imap(mail_get_first_header_utf8+0x26) [0x80b4726] -> imap [0x809386b] -> imap [0x8093900] -> imap [0x809414e] -> imap(index_sort_list_finish+0x33) [0x80949d3] -> imap(index_storage_search_next_nonblock+0x3b6) [0x80924a6] -> imap(mailbox_search_next+0x30) [0x80b5b70] -> imap(imap_sort+0xdd) [0x806407d] -> imap(cmd_sort+0x2a4) [0x805d454] -> imap [0x805e7b9] -> imap [0x805e862] -> imap(client_input+0x65) [0x805ee85] -> imap(io_loop_handler_run+0x162) [0x80cc2a2] -> imap(io_loop_run+0x28) [0x80cb628] -> imap(main+0x4ab) [0x806643b] -> /lib/tls/i686/cmov/libc.so.6(__libc_start_main+0xc Oct 1 20:32:49 dovecot: child 31161 (imap) killed with signal 6 # dovecot -n # 1.1.beta2: /etc/dovecot/dovecot.conf protocols: imap pop3 listen: 127.0.0.1 disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login first_valid_uid: 89 mail_location: maildir:~/Maildir mail_debug: yes mmap_disable: yes mail_nfs_storage: yes mail_nfs_index: yes lock_method: dotlock mail_executable(default): /usr/lib/dovecot/rawlog /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/rawlog /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugins(default): mail_plugins(imap): mail_plugins(pop3): mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 auth default: mechanisms: plain cram-md5 verbose: yes debug: yes debug_passwords: yes passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: sql args: /etc/dovecot/dovecot-sql.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vmail group: vmail

2 1

[Dovecot] Folder renaming oddities.
by Tan Shao Yi 06 Oct '07

06 Oct '07

Hi Timo, We are observing some weird behaviour when we try to rename an inferior folder, followed by the superior folder. These folders have an asterisk in the name. * LIST (\HasChildren) "." "*Own Family" * LIST (\HasChildren) "." "*Own Family.Tour" * LIST (\HasNoChildren) "." "*Own Family.Maid" * LIST (\HasNoChildren) "." "*Own Family.Tour.NZ" a OK List completed. a rename "*Own Family.Tour.NZ" "Own Family.Tour.NZ" a OK Rename completed. a LIST "" * * LIST (\HasChildren) "." "*Own Family" * LIST (\HasNoChildren) "." "*Own Family.Tour" * LIST (\HasNoChildren) "." "*Own Family.Maid" * LIST (\HasNoChildren) "." "Own Family.Tour.NZ" a OK List completed. a rename "*Own Family.Tour" "Own Family.Tour" a rename "*Own Family.Tour" "Own Family.Tour"a NO Internal error occurred. Refer to server log for more information. [2007-10-02 11:02:59] a LIST "" * * LIST (\HasChildren) "." "*Own Family" * LIST (\HasNoChildren) "." "*Own Family.Maid" * LIST (\HasChildren) "." "Own Family.Tour" * LIST (\HasNoChildren) "." "Own Family.Tour.NZ" dovecot: Oct 02 11:02:59 Error: IMAP(XXX): rename(/XXX/Maildir/.*Own Family.TourNZ, /XXX/Maildir/.Own Family.TourNZ) failed: No such file or directory It seems that the renaming of the folder succeeds, though the "a NO Internal error occurred" is reported. However, when the folders do not have an asterisk in the name. * LIST (\HasChildren) "." "Own Family" * LIST (\HasNoChildren) "." "Own Family.Maid" * LIST (\HasChildren) "." "Own Family.Tour" * LIST (\HasNoChildren) "." "Own Family.Tour.NZ" a rename "Own Family.Tour.NZ" "*Own Family.Tour.NZ" a OK Rename completed. a rename "Own Family.Tour" "*Own Family.Tour" a OK Rename completed. a LIST "" * * LIST (\HasChildren) "." "Own Family" * LIST (\HasNoChildren) "." "Own Family.Maid" * LIST (\HasChildren) "." "*Own Family.Tour" * LIST (\HasNoChildren) "." "*Own Family.Tour.NZ" The rename operation completes successfully with no error. Is there something that I am doing wrong? P.S., Will it be possible to also request the mail-log plugin to log rename operations too? :) Thanking in advance. Cheers, Tan Shao Yi

2 2

[Dovecot] Dovecot + OCFS2
by Jon Blazquez 06 Oct '07

06 Oct '07

Hello, We are running Red Hat Enterprise Linux AS release 4 (Nahant Update 4) with OCFS2 for our mail servers. There are three nodes in the cluster with shared storage and OCFS2 filesystem on it. The filesystem is used for mail storage(using Maildir layout) and is accessed by smtpd, pop3 and imap processes(DOVECOT). The system works fine but when there are mailing lists the load increases dramatically. It only occurs when there are mailing lists. We have tested it in lab with good results and now in production we are having some load problems caused by dovecot´s deliver process. In lab we had sent lots of mails but always to a few accounts. It was OK. Now there are sent less mails but there are more accounts. The load increases until it reaches about 100 and only restart fixes the problem. The umounting of the OCFS2 filesystem is not possible even when all process accessing it are killed. Any suggestions? TIA Info: Three nodes. OS: Red Hat Enterprise Linux AS release 4 (Nahant Update 4) Mailbox format: Maildir SMTP daemon: Dovecot deliver + Sendmail OCFS2 version: 1.2.5-6 Kernel Version: 2.6.9-42.0.10.ELsmp Pop3 and imap daemon: Dovecot 1.0.3 -- _________________________________________________ Jon Blázquez Diez jblazquez(a)unav.es Servicios Informáticos https://www.unav.es/SI/ Universidad de Navarra https://www.unav.es _________________________________________________

4 4

[Dovecot] Subscribe to root of Maildir namespace?
by Adam Tilghman 06 Oct '07

06 Oct '07

Our users currently make use of a single namespace, mbox format: namespace private { separator = / prefix = hidden = no inbox = yes location = mbox:~/:INBOX=/var/spool/mail/%u:INDEX=/var/spool/poptemp/dovecot/%u } I'd like to give them access to additional Maildir-format storage area, so to the above I've added: namespace private { separator = / prefix = archive/ hidden = no location = maildir:/newmail/%-3.3i/%u/:INDEX=/var/spool/poptemp/dovecot/%u.a-thumper-mail } I can set up subfolders of archive/, and they work as expected. I can also designate the "root" of archive/ as INBOX and that works properly. But "SUBSCRIBE archive" fails. Is it possible to subscribe to the "root" of this new Maildir heirarchy as if it were just another folder? If not, would this be a useful feature to add? Thanks, -- Adam Tilghman | Systems Support / Academic Computing | +1 858 822 0711 agt(a)ucsd.edu | University of California, San Diego | fax +1 858 534 7018

2 1

[Dovecot] problematic ACL with shared folders and maildir
by Dominik L. Borkowski 05 Oct '07

05 Oct '07

Hello, Recently we have been asked to deploy some shared imap folders within our instance of dovecot. However, we ran into a problem with how ACLs are implemented, and consequences regarding maildir++ mailboxes. Long story short: * IMAP clients sees the hierarchy as a tree: sample/1, where 1 is a child of sample * on the filesystem, sample/1 is represented as .sample and .sample.1, both on the same level This presents a problem: dovecot-acl file meant for sample mailbox does not apply to mailbox 1. In fact, a user with permissions to create mailboxes under sample, will not be able to access those mailboxes, once created. Wonder if anybody has been in a similar predicament, and found a solution. Any hints would be greatly appreciated. PS) I'm also documenting this process, maybe others will find it useful: https://collaboration.vbi.vt.edu/display/~dom/dovecot+-+shared+imap+folders -- Dominik L. Borkowski - Senior Systems Administrator Virginia Bioinformatics Institute - www.vbi.vt.edu

1 0

Re: [Dovecot] How to upgrade a running Dovecot?
by Jerry Yeager 05 Oct '07

05 Oct '07

On Oct 5, 2007, at 12:41 PM, dovecot-request(a)dovecot.org wrote: > > ---------------------------------------------------------------------- > > Message: 1 > Date: Fri, 5 Oct 2007 10:25:49 +0100 > From: Mike Brudenell <pmb1(a)york.ac.uk> > Subject: Re: [Dovecot] How to upgrade a running Dovecot? > To: Dovecot Mailing List <dovecot(a)dovecot.org> > Message-ID: <B9A4EC9A-82C0-4250-BC98-606695775041(a)york.ac.uk> > Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed > > Hi, Jerry/et al - > Hello Mike, (stuff chomped out) > >>> Scenario 2: Altered SSL Certificates >>> ===================================== >>> I need to replace our current certificates and have prepared new >>> files containing the replacement certificate and private key. Am I >>> right in thinking that I can simply modify dovecot.conf to point at >>> the new files and send a HUP signal to dovecot? Specifically, will >>> new connections use the revised certificates, and existing >>> connections continue to work OK without interruption? >> >> Ehh not really, the auth child processes can be killed and new ones >> started. See your next scenario question. > > ...So here you're saying that although the "dovecot" master process > re-reads the configuration file, it doing so has no effect on the > existing authenticator child processes? And is it these processes > that are dealing with the SSL connection? ... I'd have thought it was > either the "imap-login" or "imap" processes? > Just to be clear about this for myself, (instead of relying on the 'ol saying 'that is how it used to work' -- because I am switching over to 1.1 from 1.0.n your question takes on new relevance for me as well) I tested this and yes it works as before, the new files seem to be used for the new connections (all of the dovecot auth processes are killed on the HUP signal -- dovecot itself just rereads the conf file and new auth listeners are started -- assuming that you use Dovecot for the auth mechanism to Postfix) and existing connections seem to handle things okay. I did find something new (or I have not noticed it before) If you kill (not just restart) the Dovecot process itself and restart it with existing connections (someone was connected to IMAPS when you killed Dovecot) Dovecot will not restart, complaining that port 993 is taken already. This happens regardless of the shutdown_clients = yes/no setting. This may be particular to the new version 1.1, I do not know. > Jerry

1 0

[Dovecot] Thunderbird and imap alerts
by Marco De Benedetto 05 Oct '07

05 Oct '07

Is Thunderbird supposed to show alerts sent via post-login scripts as in the wiki example? dovecot-imapd 1.0.5-1 (Debian) Thunderbird (Icedove) 2.0.0.4 (Debian) # dovecot -n|grep 'mail_executable(imap)' mail_executable(imap): /usr/local/sbin/dovecot-alert.sh # cat /usr/local/sbin/dovecot-alert.sh #!/bin/sh echo "* OK [ALERT] Hello World." exec /usr/lib/dovecot/imap Logging in with Thunderbird I get this alert: "Mail server imap.example.org is not an IMAP4 server". -- Thank you, Marco De Benedetto

1 0

Re: [Dovecot] How to upgrade a running Dovecot?
by Jerry Yeager 05 Oct '07

05 Oct '07

> Have you considered sending out a message to each user to the effect that on some day, darned-early a.m. the system will be offline for 30 minutes for maintenance (no incoming email will be lost, etc., etc.). > Message: 3 > Date: Thu, 4 Oct 2007 13:57:03 +0100 > From: Mike Brudenell <pmb1(a)york.ac.uk> > Subject: [Dovecot] How to upgrade a running Dovecot? > To: Dovecot Mailing List <dovecot(a)dovecot.org> > Message-ID: <06B4C604-41E3-4061-96B2-C7C719E21D49(a)york.ac.uk> > Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed > > Greetings - > > Could someone confirm how to perform various upgrades on a live > system running Dovecot please? > > > Scenario 1: Change to dovecot.conf > =================================== > If I make a change to dovecot.conf am I right in thinking I can > simply send a HUP signal to the main dovecot process to get it to re- > read the configuration file and act on its revised content? > Yes, this is correct. > > Scenario 2: Altered SSL Certificates > ===================================== > I need to replace our current certificates and have prepared new > files containing the replacement certificate and private key. Am I > right in thinking that I can simply modify dovecot.conf to point at > the new files and send a HUP signal to dovecot? Specifically, will > new connections use the revised certificates, and existing > connections continue to work OK without interruption? > > Ehh not really, the auth child processes can be killed and new ones started. See your next scenario question. > Scenario 3: Software Upgrade > ============================= > I build a particular version of Dovecot into the tree /usr/local/ > dovecot-A.B.C and then have a symlink called "dovecot" pointing at > the this directory. To upgrade I can then build the new version > into /usr/local/dovecot-X.Y.Z and test. > > To actually switch over the live service to the new X.Y.Z version do > I need to: > > a) Totally shut down the old A.B.C version of Dovecot, thereby > breaking all > open connections for users? or > > b) Assuming I am using "shutdown_clients = no" can I just kill the > master > "dovecot" process and then start up the new version? > See the preface, do the update when you typically have few folks using the system -- which gives you fewer complaints from users should things break on their end. > Ideally I want existing connections to remain running, but new > connections to start up using the new X.Y.Z version of Dovecot. > > The comment for "shutdown_clients" implies this, but also says: > > "This however means that after master process has died, the > client > processes can't write to log files anymore." > > So if I understand this correctly then with "shutdown_clients = no" > in force then the sequence and behaviour is this? ... > > 1. Old version A.B.C of Dovecot running, clients can log > through the > master "dovecot" process to the logfiles. > > 2. Kill the old master "dovecot" process, start new X.Y.Z > version up. > > 3. New connections get served by version X.Y.Z. > Old connections DON'T get killed and can continue, BUT can > no longer > write anything to the logfiles? > > > With many thanks, > Mike B-) > > -- > The Computing Service, University of York, Heslington, York Yo10 > 5DD, UK > Tel:+44-1904-433811 FAX:+44-1904-433740 > > * Unsolicited commercial e-mail is NOT welcome at this e-mail > address. * > > > > >

4 3

[Dovecot] Compiling drac.c on a 64 bit system
by Robin Atwood 05 Oct '07

05 Oct '07

I have just installed dovecot and want to set up the drac interface. However, when I compile drac.c I get the following link errors; anybody know what the right compile options are for a 64 bit system? I have a Gentoo Linux system using the amd64 architecture. gcc -Wall -W -shared -fPIC -DHAVE_CONFIG_H -I$dovecot -I$dovecot/src/lib drac.c -o drac.so -ldrac /usr/lib/gcc/x86_64-pc-linux-gnu/4.1.2/../../../../x86_64-pc-linux-gnu/bin/ld: /usr/lib/gcc/x86_64-pc-linux-gnu/4.1.2/../../../../lib64/libdrac.a(dracauth.o): relocation R_X86_64_32S against `a local symbol' can not be used when making a shared object; recompile with -fPIC /usr/lib/gcc/x86_64-pc-linux-gnu/4.1.2/../../../../lib64/libdrac.a: could not read symbols: Bad value collect2: ld returned 1 exit status TIA -Robin. -- ---------------------------------------------------------------------- Robin Atwood. "Ship me somewheres east of Suez, where the best is like the worst, Where there ain't no Ten Commandments an' a man can raise a thirst" from "Mandalay" by Rudyard Kipling ----------------------------------------------------------------------

2 2

[Dovecot] Deliver prints passwort to the syslog
by Dominik Schulz 05 Oct '07

05 Oct '07

Hi, I've got the problem that dovecot's deliver prints the authentification information to the syslog. Like this: Sep 18 12:11:22 mail deliver(user(a)domain.tld): auth input: user=user(a)domain.tld Sep 18 12:11:22 mail deliver(user(a)domain.tld): auth input: password=XXXX Sep 18 12:11:22 mail deliver(user(a)domain.tld): auth input: home=/home/mail/domain.tld/user Sep 18 12:11:22 mail deliver(user(a)domain.tld): auth input: uid=8 Sep 18 12:11:22 mail deliver(user(a)domain.tld): auth input: gid=8 I guess that it's only a configuration option but right now I can't figure out which one I need to change to turn this off. Any help would be appreciated. Thanks in advance. Best Regards Dominik

3 3

[Dovecot] UIDL and IMAP
by Kenneth Porter 04 Oct '07

04 Oct '07

I finally got my aging FC2 box retired and moved all email to my new CentOS 5 box. My site is all-IMAP, no POP3. I have one user who downloads all email to Thunderbird on his laptop so that he can work offline while away from a network connection (eg. on an airplane). I forgot to change the pop3_uidl_format setting as described here: <http://wiki.dovecot.org/Upgrading/1.0> So he was seeing repeated downloads of all his mail (about 300 MBytes) every time he connected. (I'm not sure why it didn't happen only the first time.) I changed the setting and haven't heard back whether if fixed things for him. Does this setting in fact get used by IMAP? It's in the POP3 section, so I'm wondering if it takes effect when one is using IMAP from the client. CentOS 5 is currently shipping with: dovecot-1.0-1.2.rc15.el5 I may look for a newer release. CentOS, based on RHEL, is intended to be a conservative distro, so I'll probably need to look at RPMForge (an addon repository of more exotic and bleeding edge software) to see if it offers a newer release.

2 1

[Dovecot] Dovceot user pop3 last connect info?
by Tim Tyler 04 Oct '07

04 Oct '07

Dovecot experts, I am a newbie to Dovecot. I am in the process of replacing qpopper with dovecot to support pop 3 clients. I have installed the latest version of Dovecot on Fedora Core 6. Everything seems to be working fine using ldap, etc. However, with qpopper, I used to have .pop.username files which would give me a time stamp of the last time a user established a pop3 connection. I know that Dovecot has logs of connection in the /var/log/maillog files, but these files rotate out over a relatively short period of time. Is there a method by which one can keep track of the last time a pop3 connection was established for each user when using Dovecot? Tim Tyler Network Engineer - Beloit College tyler(a)beloit.edu

2 1

[Dovecot] Namespace "hidden" option not working?
by Ed W 04 Oct '07

04 Oct '07

I either misunderstand the namespace hidden option, or else perhaps it's not working correctly in 1.0.5? dovecot.conf # default namespace namespace private { separator = / prefix = inbox = yes hidden = yes } # for backwards compatibility: namespace private { separator = . prefix = INBOX. inbox = yes } Then login and test s6jh LIST "" "*" SND: <<< len(939) Comp_len(118) Time:0.137985 * LIST (\HasNoChildren) "/" "Diary" * LIST (\HasNoChildren) "/" "Spam" * LIST (\HasNoChildren) "/" "Sent" * LIST (\HasNoChildren) "/" "Archive" * LIST (\HasNoChildren) "/" "Sent Items" * LIST (\HasNoChildren) "/" "Subdir" * LIST (\HasNoChildren) "/" "Junk E-mail" * LIST (\HasNoChildren) "/" "Trash" * LIST (\HasNoChildren) "/" "Drafts" * LIST (\HasNoChildren) "/" "Deleted Items" * LIST (\HasNoChildren) "/" "INBOX" * LIST (\HasNoChildren) "." "INBOX.Diary" * LIST (\HasNoChildren) "." "INBOX.Spam" * LIST (\HasNoChildren) "." "INBOX.Sent" * LIST (\HasNoChildren) "." "INBOX.Archive" * LIST (\HasNoChildren) "." "INBOX.Sent Items" * LIST (\HasNoChildren) "." "INBOX.Subdir" * LIST (\HasNoChildren) "." "INBOX.Junk E-mail" * LIST (\HasNoChildren) "." "INBOX.Trash" * LIST (\HasNoChildren) "." "INBOX.Drafts" * LIST (\HasNoChildren) "." "INBOX.Deleted Items" * LIST (\HasChildren) "." "INBOX" The idea was to support an old client using Courier like access whilst still letting new clients access using the normal process Ed W

3 6

[Dovecot] Disable imap proxy access
by Dominique Feyer 04 Oct '07

04 Oct '07

I work on a dovecot cluster (15 servers) we need to add a new storage array and move the data for a list of user from the old storage to the new one. We use dovecot proxy to redirect imap and pop3 to the same server everytime. How to disable pop3 and imap access during the data migration process (duration 5 minutes to 10 minutes). Can i send a custom error message to our users ? Thanks for your help Dominique Feyer

4 4

[Dovecot] Postfix with Deliver (LDA) - user unknown
by Karin Gregorec 04 Oct '07

04 Oct '07

Good Day All! I am attempting to configure deliver as our LDA. I am also configuring the server to use Postfix instead of Sendmail. I have followed the all the documentation and examples I could find. Below are my Dovecot and Postfix configs. Can someone please smack me upside the head and tell me why I am getting "user unknown" errors? If i don't use deliver as the LDA, all works perfectly. Help... TIA, glenn ========== *** Dovecot Config *** dovecot -n # 1.0.5: /usr/local/etc/dovecot.conf base_dir: /var/run/dovecot/ log_path: /var/log/maillogs/dovecot.log protocols: imap imaps pop3 pop3s ssl_cipher_list: ALL:!LOW disable_plaintext_auth: no verbose_ssl: yes login_dir: /var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login login_greeting: GID Ready login_log_format_elements: user=<%u> service=%s authMethod=%m rIP=%r lIP=%l encryption=%c login_max_processes_count: 256 verbose_proctitle: yes first_valid_uid: 5000 last_valid_uid: 10000 first_valid_gid: 0 mail_extra_groups: mail mail_location: maildir:~/Maildir dotlock_use_excl: yes fsync_disable: yes maildir_copy_with_hardlinks: yes mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_process_size: 1024 mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(pop3): mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 imap_client_workarounds(default): delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(imap): delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(pop3): outlook-idle pop3_uidl_format(default): pop3_uidl_format(imap): pop3_uidl_format(pop3): %08Xu%08Xv pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh pop3_logout_format(default): top=%t/%p, retr=%r/%b, del=%d/%m, size=%s pop3_logout_format(imap): top=%t/%p, retr=%r/%b, del=%d/%m, size=%s pop3_logout_format(pop3): top=%t/%T, retr=%r/%R, del=%d/%m, size=%s auth default: cache_size: 1024 cache_ttl: 604800 verbose: yes passdb: driver: pam args: cache_key=%Lu userdb: driver: passwd socket: type: listen master: path: /var/run/dovecot/auth-master mode: 384 user: maildrop plugin: quota: maildir:storage=10000000:ignore=Trash *** Postfix main.cf *** alias_database = hash:/etc/mail/postfix/aliases alias_maps = hash:/etc/mail/postfix/aliases biff = no command_directory = /usr/local/sbin daemon_directory = /usr/local/libexec/postfix debug_peer_level = 2 debugger_command = PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont; echo where) | gdb $daemon_directory/$process_name $process_id 2>&1 >$config_directory/$process_name.$process_id.log & sleep 5 #### Dovecot LDA Service - http://wiki.dovecot.org/LDA/Postfix dovecot_destination_recipient_limit = 1 home_mailbox = Maildir/ html_directory = no inet_interfaces = all mail_owner = postfix mail_spool_directory = /var/mail mailq_path = /usr/local/bin/mailq manpage_directory = /usr/local/man message_size_limit = 12000000 mydestination = $myhostname, localhost.$mydomain, localhost mydomain = geekinternetdevelopment.com myhostname = superman.geekinternetdevelopment.com mynetworks = 72.18.193.0/24, 127.0.0.0/8 newaliases_path = /usr/local/bin/newaliases queue_directory = /var/spool/postfix readme_directory = no sample_directory = /usr/local/etc/postfix sendmail_path = /usr/local/sbin/sendmail setgid_group = maildrop smtpd_banner = $myhostname NO WHAMMIES!!! virtual_gid_maps = static:5000 virtual_mailbox_base = /var/mailboxes virtual_mailbox_domains = hash:/etc/mail/postfix/vdomains virtual_mailbox_maps = hash:/etc/mail/postfix/vmailboxes virtual_minimum_uid = 1000 virtual_transport = dovecot virtual_uid_maps = static:5000 unknown_local_recipient_reject_code = 550 *** Postfix master.cf *** ...snip... dovecot unix - n n - - pipe flags=DRhu user=maildrop:maildrop argv=/usr/local/libexec/dovecot/deliver -e -d ${recipient}

4 3

[Dovecot] autocreate plugin
by Lars Stavholm 04 Oct '07

04 Oct '07

Did anyone get the autocreate plugin working? I've compiled, installed and configured, but no mailboxes/folders are created. /L

1 1

Re: [Dovecot] Postfix with Deliver (LDA) - user unknown
by Lars Stavholm 04 Oct '07

04 Oct '07

Let's try to keep this on the list shall we. hgic(a)geekazoid.com wrote: > Here is the conversation from my maillog: > Oct 3 20:52:15 superman postfix/pickup[179]: B77EA130C28: uid=0 from=<root> > Oct 3 20:52:15 superman postfix/cleanup[232]: B77EA130C28: > message-id=<20071004035215.B77EA130C28(a)superman.geekinternetdevelopment.com> > Oct 3 20:52:15 superman postfix/qmgr[98583]: B77EA130C28: > from=<root(a)superman.geekinternetdevelopment.com>, size=375, nrcpt=1 (queue > active) > Oct 3 20:52:15 superman postfix/pipe[234]: B77EA130C28: > to=<test(a)geekinetdev.com>, relay=dovecot, delay=0.25, > delays=0.16/0.01/0/0.08, dsn=5.1.1, status=bounced (user unknown) > Oct 3 20:52:15 superman postfix/cleanup[232]: E0729130C32: > message-id=<20071004035215.E0729130C32(a)superman.geekinternetdevelopment.com> > Oct 3 20:52:15 superman postfix/bounce[236]: B77EA130C28: sender > non-delivery notification: E0729130C32 > Oct 3 20:52:15 superman postfix/qmgr[98583]: E0729130C32: from=<>, > size=2294, nrcpt=1 (queue active) > Oct 3 20:52:15 superman postfix/qmgr[98583]: B77EA130C28: removed > Oct 3 20:52:16 superman postfix/local[237]: E0729130C32: > to=<geekserver(a)superman.geekinternetdevelopment.com>, Do you have a user called "geekserver". Looks a bit dodgy. > orig_to=<root(a)superman.geekinternetdevelopment.com>, relay=local, dovecot is a bit peculiar with the "root" user. You should always alias that to a real user. Or maybe you have. > delay=0.13, delays=0.06/0.01/0/0.06, dsn=5.1.1, status=bounced (unknown > user: "geekserver") Well, do you have a user called "geekserver"? > Oct 3 20:52:16 superman postfix/qmgr[98583]: E0729130C32: removed > > dovecot.log has: > > dovecot: Oct 03 08:57:04 Info: auth(default): > passwd(test(a)geekinetdev.com): unknown user That seems to be unrelated to the above. /L > dovecot-deliver.log is empty... > > Thanks for your assistance!!! ;-) > > glenn > >> System log could help. >> /L >> >> Karin Gregorec wrote: >>> Good Day All! I am attempting to configure deliver as our LDA. I am >>> also configuring the server to use Postfix instead of Sendmail. I >>> have followed the all the documentation and examples I could find. >>> >>> Below are my Dovecot and Postfix configs. Can someone please smack me >>> upside the head and tell me why I am getting "user unknown" errors? >>> If i don't use deliver as the LDA, all works perfectly. Help... >>> >>> TIA, >>> glenn >>> >>> ========== >>> >>> >>> *** Dovecot Config *** >>> >>> dovecot -n >>> # 1.0.5: /usr/local/etc/dovecot.conf >>> base_dir: /var/run/dovecot/ >>> log_path: /var/log/maillogs/dovecot.log >>> protocols: imap imaps pop3 pop3s >>> ssl_cipher_list: ALL:!LOW >>> disable_plaintext_auth: no >>> verbose_ssl: yes >>> login_dir: /var/run/dovecot/login >>> login_executable(default): /usr/local/libexec/dovecot/imap-login >>> login_executable(imap): /usr/local/libexec/dovecot/imap-login >>> login_executable(pop3): /usr/local/libexec/dovecot/pop3-login >>> login_greeting: GID Ready >>> login_log_format_elements: user=<%u> service=%s authMethod=%m rIP=%r >>> lIP=%l encryption=%c >>> login_max_processes_count: 256 >>> verbose_proctitle: yes >>> first_valid_uid: 5000 >>> last_valid_uid: 10000 >>> first_valid_gid: 0 >>> mail_extra_groups: mail >>> mail_location: maildir:~/Maildir >>> dotlock_use_excl: yes >>> fsync_disable: yes >>> maildir_copy_with_hardlinks: yes >>> mail_executable(default): /usr/local/libexec/dovecot/imap >>> mail_executable(imap): /usr/local/libexec/dovecot/imap >>> mail_executable(pop3): /usr/local/libexec/dovecot/pop3 >>> mail_process_size: 1024 >>> mail_plugins(default): quota imap_quota >>> mail_plugins(imap): quota imap_quota >>> mail_plugins(pop3): >>> mail_plugin_dir(default): /usr/local/lib/dovecot/imap >>> mail_plugin_dir(imap): /usr/local/lib/dovecot/imap >>> mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 >>> imap_client_workarounds(default): delay-newmail outlook-idle >>> netscape-eoh tb-extra-mailbox-sep >>> imap_client_workarounds(imap): delay-newmail outlook-idle netscape-eoh >>> tb-extra-mailbox-sep >>> imap_client_workarounds(pop3): outlook-idle >>> pop3_uidl_format(default): >>> pop3_uidl_format(imap): >>> pop3_uidl_format(pop3): %08Xu%08Xv >>> pop3_client_workarounds(default): >>> pop3_client_workarounds(imap): >>> pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh >>> pop3_logout_format(default): top=%t/%p, retr=%r/%b, del=%d/%m, size=%s >>> pop3_logout_format(imap): top=%t/%p, retr=%r/%b, del=%d/%m, size=%s >>> pop3_logout_format(pop3): top=%t/%T, retr=%r/%R, del=%d/%m, size=%s >>> auth default: >>> cache_size: 1024 >>> cache_ttl: 604800 >>> verbose: yes >>> passdb: >>> driver: pam >>> args: cache_key=%Lu >>> userdb: >>> driver: passwd >>> socket: >>> type: listen >>> master: >>> path: /var/run/dovecot/auth-master >>> mode: 384 >>> user: maildrop >>> plugin: >>> quota: maildir:storage=10000000:ignore=Trash >>> >>> >>> *** Postfix main.cf *** >>> >>> alias_database = hash:/etc/mail/postfix/aliases >>> alias_maps = hash:/etc/mail/postfix/aliases >>> biff = no >>> command_directory = /usr/local/sbin >>> daemon_directory = /usr/local/libexec/postfix >>> >>> debug_peer_level = 2 >>> debugger_command = >>> PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont; >>> echo where) | gdb $daemon_directory/$process_name $process_id 2>&1 >>> >$config_directory/$process_name.$process_id.log & sleep 5 >>> >>> #### Dovecot LDA Service - http://wiki.dovecot.org/LDA/Postfix >>> dovecot_destination_recipient_limit = 1 >>> >>> home_mailbox = Maildir/ >>> html_directory = no >>> inet_interfaces = all >>> mail_owner = postfix >>> mail_spool_directory = /var/mail >>> mailq_path = /usr/local/bin/mailq >>> manpage_directory = /usr/local/man >>> message_size_limit = 12000000 >>> mydestination = $myhostname, localhost.$mydomain, localhost >>> mydomain = geekinternetdevelopment.com >>> myhostname = superman.geekinternetdevelopment.com >>> mynetworks = 72.18.193.0/24, 127.0.0.0/8 >>> newaliases_path = /usr/local/bin/newaliases >>> queue_directory = /var/spool/postfix >>> readme_directory = no >>> sample_directory = /usr/local/etc/postfix >>> sendmail_path = /usr/local/sbin/sendmail >>> setgid_group = maildrop >>> smtpd_banner = $myhostname NO WHAMMIES!!! >>> >>> virtual_gid_maps = static:5000 >>> virtual_mailbox_base = /var/mailboxes >>> virtual_mailbox_domains = hash:/etc/mail/postfix/vdomains >>> virtual_mailbox_maps = hash:/etc/mail/postfix/vmailboxes >>> virtual_minimum_uid = 1000 >>> virtual_transport = dovecot >>> virtual_uid_maps = static:5000 >>> unknown_local_recipient_reject_code = 550 >>> >>> *** Postfix master.cf *** >>> ...snip... >>> dovecot unix - n n - - pipe >>> flags=DRhu user=maildrop:maildrop >>> argv=/usr/local/libexec/dovecot/deliver -e -d ${recipient} >

1 0

[Dovecot] In-site migration from /etc/passwd to LDAP
by Maykel Moya 04 Oct '07

04 Oct '07

I'm doing in-site migration of accounts from /etc/passwd to an LDAP directory. The migration should be progressive (not all users at the same time). I'm already able to check mail for accounts in /etc/passwd and accounts in LDAP. The problem is with mail delivery. I'm using Postfix + Dovecot-LDA. This is the error I get with every delivery -- dovecot: Oct 03 00:16:09 Info: auth(default): master in: USER 1 moya service=deliver dovecot: Oct 03 00:16:09 Info: auth(default): ldap(moya): user search: base=ou=users,dc=sld,dc=cu scope=subtree filter=(&(objectClass=posixAccount)(uid=moya)) fields=sldMailbox,uidNumber dovecot: Oct 03 00:16:09 Info: auth(default): master out: USER 1 moya home=/srv/vmail/m/moya/ uid=29174 gid=101 deliver(moya): Oct 03 00:16:09 Fatal: setuid(29174) failed: Operation not permitted -- 29174 is the uid for moya, is the same in /etc/passwd or in LDAP via posixAccount class. Any advise please? Regards, maykel

3 4

[Dovecot] new antispam plugin
by Johannes Berg 03 Oct '07

03 Oct '07

Sparked from the discussion on the list, I've put my antispam plugin into git and split up the code into a frontend and possibly multiple backends. See http://git.sipsolutions.net/dovecot-antispam.git/ (URL functions as both gitweb and git URL) Andreas, I took your README file and adjusted it, I hope you don't mind. I didn't fork from your git tree because you'd already implemented the libdspam backend there. Maybe you could take a look at the new backend/frontend separation and implement a libdspam backend. Aria, it should be possible to write a spamassassin plugin, quite easily if spamassassin supports training based on signatures, not quite so easily otherwise though I intend to plan this. Timothy, you could write the mysql logger as a backend too. I take patches :) Oh and as always thanks to Timo for implementing such a nice server and string, memory and mail handling API. johannes

4 17

[Dovecot] --enable-headers-install problem in 1.0.5
by Trever L. Adams 02 Oct '07

02 Oct '07

I am trying to get a SPEC file for an RPM to build a devel package. I have it working, except for one thing. 1.0.5 doesn't actually install the headers with that option to configure found in the subject. It does create the directory, but it doesn't put the files there. Timo, is this a known/unknown bug, or am I doing something stupid? Thanks, Trever

3 2

[Dovecot] SORT(DATE) and missing Date headers
by Kyle Wheeler 02 Oct '07

02 Oct '07

Hello, Occasionally, I get mail that's missing a Date header. The usual suspects are iTunes weekly mailings and NYTimes email-to-a-friend articles. I use qmail, which doesn't "fix" these malformed emails by adding a Date header (like Sendmail does), so when they get to my mailbox, they're just as badly formed as they were when they were sent, which is to say, they have no Date header. Unfortunately, this means that SORT (DATE) puts them at the beginning of the list---and in a mailbox with lots of old mail, that's usually the wrong spot. Now, my email clients will do some basic guesswork about when the message was sent, usually by falling back on the timestamp of the first-added Received header. So, they will display a date. But they have to then sort all messages themselves in order to get a valid sorting. Would it be possible to get Dovecot to fall back to Received header parsing whenever a message is missing a Date header? The idea is that SORT (DATE) would then become useful even in the face of commonly malformed email. How hard would this be to hack into the current Dovecot source? Does this maybe exist already (e.g. as SORT (X-DATE)? ~Kyle -- There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order. -- Ed Howdershelt

3 7

[Dovecot] Slight problem with dovecot + IMAP
by Timothy Murphy 02 Oct '07

02 Oct '07

I'm running dovecot on my desktop with kmail as IMAP client on my laptop. When I start kmail on the laptop it sometimes takes several minutes to "calm down". The number of messages listed in the IMAP inbox increases greatly - maybe from 2500 to 3000 - and then slowly decreases. There are sometimes a large number of duplicate messages, which kmail allows one to delete. I don't know if this is a kmail or dovecot problem. It is quite likely there is something wrong in my setup. Any suggestions or advice gratefully received.

2 4

[Dovecot] IMAP Fetch fails with BAD instead of NO
by Reinier Bezuidenhout 02 Oct '07

02 Oct '07

Hi, I'm running version 1.0.3 of dovecot using IMAP and using javamail to access the mail. The application I'm using (when stress testing the system by doing simultaious creation of email and deleting emails, it sometimes get into the state where the application (via javamail) ask for the UID of a message that has been expunged and deleted (no longer exists). Dovecot returns with the following error: AXXX FETCH 14 (UID) AXXX BAD Error in IMAP command FETCH: Invalid messageset This can easily be reproduced by using telnet to 143 and giving the command by hand. When I read through the source code, there were obvious comments that states the dovecot will not return NO on fetch errors, only BAD. So I assume it is done on purpose. My question is that in RFC 3501 for fetch it says: (section 6.4.5) Result: OK - fetch completed NO - fetch error: can't fetch that data BAD - command unknown or arguments invalid No I guess a UID that is out of range could be considered "arguments invalid", but shouldn't it be a soft error with NO as a result where "can't fetch that data" is more appropriate according the the RFC. The command isn't syntactically BAD, the requested data just does not exists. The same command tested against another IMAP server returns AXXX NO message not available Not that they are necessarily correct, but it just begs the question. Thanks Reinier Running on FreeBSD 6.x (x86) devmail# dovecot -n # 1.0.3: /usr/local/etc/dovecot.conf protocols: imap pop3 ssl_disable: yes disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login valid_chroot_dirs: /var/mail verbose_proctitle: yes first_valid_uid: 3000 last_valid_uid: 5000 first_valid_gid: 0 mail_extra_groups: mail mail_location: mbox:~/mail/:INBOX=/var/mail/%u mail_debug: yes maildir_copy_with_hardlinks: yes mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 imap_client_workarounds(default): delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(imap): delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(pop3): outlook-idle pop3_uidl_format(default): pop3_uidl_format(imap): pop3_uidl_format(pop3): %08Xu%08Xv pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh auth default: verbose: yes passdb: driver: ldap args: /usr/local/etc/dovecot-ldap.conf userdb: driver: ldap args: /usr/local/etc/dovecot-ldap-user.conf userdb: driver: prefetch devmail#

2 2

Re: [Dovecot] Moving email from a folder to another using IMAP isvery slow (sometimes)
by Stefano Scalise 02 Oct '07

02 Oct '07

Hi to all, very strange! I tried to debug why imap process takes 100% CPu and it is very slow when I move an email from an imap folder to another imap folder and then I typed: strace -tt -o /log-imap.txt -p <process number> well, during the trace the imap process doesn't crash and it is very fast. If I stop the tracing, I have again the problem and sometimes the crash of the process. Any help? Thank you, Stefano. ----- Original Message ----- From: "Stefano Scalise" <s.scalise(a)tno.it> To: "Timo Sirainen" <tss(a)iki.fi> Cc: <dovecot(a)dovecot.org> Sent: Monday, October 01, 2007 4:21 PM Subject: Re: [Dovecot] Moving email from a folder to another using IMAP isvery slow (sometimes) > Sorry, but with the new version (1.1.beta2), I still have the same problem > of very slowness during moving email between two imap folders. What can I > do for debugging it? > Stefano. > > ----- Original Message ----- > From: "Timo Sirainen" <tss(a)iki.fi> > To: "Stefano Scalise" <s.scalise(a)tno.it> > Cc: <dovecot(a)dovecot.org> > Sent: Sunday, September 30, 2007 1:52 PM > Subject: Re: [Dovecot] Moving email from a folder to another using IMAP > isvery slow (sometimes) > > On Wed, 2007-09-26 at 12:05 +0200, Stefano Scalise wrote: >> Update to the problem: >> >> I tried to stress the server with many moving and I received: >> >> Sep 26 10:56:40 sirio3 dovecot: IMAP(<email_address>): Trying to allocate >> 0 >> bytes > > This should fix it: http://hg.dovecot.org/dovecot/rev/c6b85cf1e63a > > I'll probably make a beta2 release today after fixing several other > things. > >

1 0

Re: [Dovecot] Dovecot do not retrieve mail from spool directory (pop3)
by jsorlowscy＠netzero.net 02 Oct '07

02 Oct '07

Hello, This is new yum installation .I guess to have it upgraded I would have to do it from sources. Slawomir _____________________________________________________________ Be your own boss today! Go to Technical School. Click here. http://3rdpartyoffers.netzero.net/TGL2211/fc/Ioyw6ijngzUEYVPPo5gAQYgMx4ihgx…

1 0

[Dovecot] plugin problem
by Lars Stavholm 02 Oct '07

02 Oct '07

I'm trying to do a rewrite of the dspam_plugin for dovecot 1.1b1. There are some API changes that warranted an update of the plugin. Also, I wanted the dspam_plugin to be able to handle pristine mails for dspam retraining, as opposed to the signature based retraining. Question: How can I retrieve the full unix path for a specific mail? The original code uses mail_get_first_header() to retrieve the signature header. I need something like mail_get_mail_file_path(&path) which I then could pass on to dspam. Is there some such function available? Thanks in advance /Lars

5 19

[Dovecot] Dovecot do not retrieve mail from spool directory (pop3)
by jsorlowscy＠netzero.net 02 Oct '07

02 Oct '07

Hello, I have Dovecot 1.0.beta8 on FC5.[root@topaz orlowscy.com] # dovecot -n log_path: /var/log/dovecot protocols: pop3 login_dir: /var/run/dovecot/login login_executable: /usr/libexec/dovecot/pop3-login default_mail_env: mbox:/tmp:INBOX:/var/spool/vmail/%d/%n:INDEX=MEMORY mail_executable: /usr/libexec/dovecot/pop3 mail_plugin_dir: /usr/lib/dovecot/pop3 auth default: verbose: yes passdb: driver: pam passdb: driver: passwd-file args: /etc/mail/passwd-dovecot userdb: driver: passwd userdb: driver: static args: uid=vmail gid=vmail home=/var/spool/vmail/%d/%n I can send and receive email by exim SMTP server. I would like to use dovecot as pop3 only server. I can send and .email and I see them delivered to /var/spool/vmail/virtualdomain/ directories. They are own by vmail user created for dovecot. Dovecot is able to authenticate but is not retrieving any emails. dovecot: Oct 01 23:19:55 Info: auth(default): pam(sorlowski@orlowscy.com,::ffff:83.14.109.98): pam_authenticate() f ailed: Error in service module dovecot: Oct 01 23:19:55 Info: auth(default): passwd(sorlowski@orlowscy.com,::ffff:83.14.109.98): unknown user dovecot: Oct 01 23:19:55 Info: pop3-login: Login: user=<sorlowski(a)orlowscy.com>, method=PLAIN, rip=::ffff:83.14.109 .98, lip=::ffff:83.14.109.98 dovecot: Oct 01 23:20:49 Info: POP3(sorlowski(a)orlowscy.com): Disconnected: Logged out top=0/0, retr=0/0, del=0/0, s ize=0 I was trying to retrieve them by Outlook express. When logged in as telnet localhost 110 after LIST commant I'm getting +OK Logged in. list +OK 0 messages: even there is file with some emails. [root@topaz log]# ls -l /var/spool/vmail/orlowscy.com/sorlowski -rw-rw---- 1 vmail vmail 5164 Oct 1 23:18 /var/spool/vmail/orlowscy.com/sorlowski Please anybody help. Regards Slawomir _____________________________________________________________ Click for free info on earning your associates degrees. http://3rdpartyoffers.netzero.net/TGL2211/fc/Ioyw6ijlTO8Ob6PMzIhmxC5HdvZZ6S…

2 1

[Dovecot] shared mailboxes question
by Cory Coager 01 Oct '07

01 Oct '07

I'm using a virtual mailbox setup. Lets say my users have mailboxes in /home/vmail/domain/%u. What I'm trying to do is setup one namespace that points to /home/vmail/domain and contains everyones mailboxes that I can subscribe to. Is this possible? I tried using a symlink to /home/vmail/domain but it doesn't work because its looking for the dotFoldername. The only way I could get this to work is by creating a symlink for each folder in every mailbox. This is way too much maintenance especially since it will dynamically change. The only other way I could get it working was to create a namespace for each user and point to /home/vmail/domain/%u/Maildir/. Then inside everyones Maildir/ create a symlink for INBOX -> . This works but I'd have to do it for each user when I'd rather just use one namespace. Is there an easier way of doing this?

4 9

[Dovecot] Opinions on preferred namespace?
by Ed W 01 Oct '07

01 Oct '07

Hi Any opinions on a preferred namespace setting for use with Dovecot? Deciding factors seem to be client support, not being too unusual, accidental ease of setup, wider character range support (eg dots in folder names?), issues when scripting imap commands? For example Outlook Express (common with our userbase) seems to assume no folderprefix when using our current Courier server and from memory I think this causes some subtle issue with Sent Items and Drafts folders until you tell it to use an INBOX. folder prefix? (can't recall the exact details right now) I notice also that Thunderbird will show all folders under "Inbox" if I have an INBOX. prefix, but shows them all in a list if there is not one. Actually I find the former quite a useful feature because I have a number of test accounts where I only want to click into the INBOX, do I can keep the list of folders closed up Any other programs exhibit any (possibly beneficial) side effects from different prefix choices? Anyone got any preferences either way? Any pros/cons in using a dot as folder separator rather than a slash? I can see some logic in using an INBOX folder prefix and a slash as the folder separator because this would then mimic the on-disk layout.. (Is this what cyrus does?) I mainly care about best support for Outlook Express / Windows Mail and Thunderbird - any opinions on most compatible settings? Cheers Ed W

1 1