- dovecot - dovecot.org

[Dovecot] Corrupted index cache file dovecot.index.cache: invalid record size
by bofh list 07 Nov '06

07 Nov '06

Hi, Our dovecot setup consists of two hosts running dovecot-1.0.beta9 with Maildir/indices stored on NFS(noac,actimeo=0 used). I am seeing these messages at times - but no real problems on the client side. Is this something to worry about? dovecot: Oct 17 10:33:31 Error: IMAP(user): Corrupted index cache file mailstore/user/Maildir/.mail.incoming/dovecot.index.cache: invalid record size Thanks!

2 6

[Dovecot] RC10 errors
by Eric Rostetter 07 Nov '06

07 Nov '06

I just installed a limited test of RC10 last night. So far, all is great except for errors being logged for one user (out of about 150 users total). This one user has not yet complained or anything, but the log file has repeated entries of the following format for him (host and username changed to protect the guilty/innocent): Oct 24 06:13:02 mail dovecot: IMAP(username): file mbox-sync-rewrite.c: line 405 (mbox_sync_read_and_move): assertion failed: (need_space == (uoff_t)-mails[idx].space) Oct 24 06:13:02 mail1 dovecot: child 18235 (imap) killed with signal 6 I find it most interesting that only 1 out of 150+ users is getting this error... And again, no complaints from the user. Setup is: wu-imap mbox files in /var/spool/mail (exported via NFS, but local to the dovecot server). Mail in ~/mail/ (NFS mount, foreign to devecot server). Indexes in /var/dovecot/indexes (local to dovecot server with no NFS at all). -- Eric Rostetter The Department of Physics The University of Texas at Austin Go Longhorns!

1 1

[Dovecot] rc13 soon
by Timo Sirainen 07 Nov '06

07 Nov '06

I think I'll just start making new releases whenever I've fixed something important. You'll have a while to report more bugs and then I'll make rc13 release, maybe in about 5 hours or maybe tomorrow. I updated already the nightly snapshot if you want to test the upcoming rc13. Changes so far: + deliver: If we're executing as a normal system user, get the HOME environment from passwd if it's not set. This makes it possible to run deliver from .forward. - Older compilers caused LDAP authentication to crash - Dying LDAP connections weren't handled exactly correctly in rc11, although it seemed to work usually - Fixed crashes and memory leaks with AUTHENTICATE command - Fixed crashes and leaks with IMAP/POP3 proxying

1 0

[Dovecot] 1.0rc10 proxy memory usage problem
by Laurent Papier 07 Nov '06

07 Nov '06

Hi, I have a rather large dovecot setup (4 proxy only servers and 21 IMAP/POP3 servers) in production for 3 days now. The memory usage on my proxy servers only grows over time. It looks like a memory leak somewhere in dovecot. I have a RRD graph available on demand. Any advise on the configuration ? Timo, I have strace a process before the manual restart. If it can help just ask for. My configuration : Linux kernel 2.6. I use MySQL as authentication back-end. # dovecot --version 1.0.rc10 # dovecot --build-options Build options: ioloop=epoll notify=dnotify ipv6 openssl SQL drivers: mysql Passdb: checkpassword pam passwd passwd-file shadow sql Userdb: checkpassword passwd prefetch passwd-file sql static ----- config ----- protocols = pop3 imap disable_plaintext_auth = no ssl_disable = yes login_process_size = 128 login_process_per_connection = no login_processes_count = 16 login_max_connections = 512 login_greeting = ready auth_cache_size = 32768 auth_cache_ttl = 1800 auth_worker_max_count = 30 auth default { mechanisms = plain # Userdb settings are not used with proxy but there need to be something. userdb static { args = static uid=5000 gid=5000 home=/dev/null } passdb sql { args = /etc/dovecot-mysql.conf } user = root count = 1 } -- Laurent Papier

2 5

[Dovecot] Dovecot-ldap doesnt reconnect if openldap restarts
by Peter Nixon 07 Nov '06

07 Nov '06

Hi Guys I have recently migrated an existing courier install to dovecot + openldap and think dovecot is wonderfull. Great work! However, I am seeing that dovecot-ldap doesnt reconnect if openldap restarts. Is there an options I am missing or is this a know problem?As I am using dovecot for sasl with postfix and pop/imap this basically completely stops my mail sytem... Thanks in Advance -- Peter Nixon http://www.peternixon.net/ PGP Key: http://www.peternixon.net/public.asc

2 6

[Dovecot] move the message between folder problem with quota.
by Antonio Casado Rodríguez 07 Nov '06

07 Nov '06

Hi, i have dovecot 1.0rc12, postfix, RedHat Enterprise Linux ES 4.0 Update 4. IMAP client Thunderbird 1.5.0.7 Only namespace: namespace private { separator = / inbox = yes prefix = location = maildir:~/Maildir/ } When the quota limit is near... more maildirsize 5242880S 0 0 2688058 1 1993336 1 ... if i move the message betweeen foders, dovecot say: quota exceeded. Is this a error? If i delete the message (trash folder), it not work too. would not have to work as Maildir++ specification says? http://www.inter7.com/courierimap/README.maildirquota.html (Reading from a Maildir++) Thanks a lot.

2 1

[Dovecot] rc12 dovecot-auth core dump with ldap
by Chris Wakelin 07 Nov '06

07 Nov '06

Hi, I've got a core dump during initialisation when I use 1.0.rc12 and LDAP with authenticated binds in Solaris. It worked OK in 1.0.rc10. Here's the non-commented entries in dovecot-ldap.conf - some of which are probably redundant :) :- hosts = xxx.yyy.rdg.ac.uk auth_bind = yes auth_bind_userdn = "cn=%n,cn=users,dc=xxx,dc=yyy,dc=rdg,dc=ac,dc=uk" ldap_version = 3 base = "dc=xxx,dc=yyy,dc=rdg,dc=ac,dc=uk" deref = never scope = subtree user_filter = (&(objectClass=User)(sAMAccountName=%n)) pass_filter = (&(objectClass=User)(sAMAccountName=%n)) Strangely, it crashes in a different place when I don't define the scope, so I'm guessing it's something to do with reading parameters. backtrace with "scope = subtree" : #0 0x1ec94 in db_ldap_init ( config_path=0x5bc08 "/opt/RDGdovect/etc/dovecot-ldap.conf") at db-ldap.c:661 661 if (*conn->set.user_global_gid == '\0') (gdb) bt #0 0x1ec94 in db_ldap_init ( config_path=0x5bc08 "/opt/RDGdovect/etc/dovecot-ldap.conf") at db-ldap.c:661 #1 0x246e8 in passdb_ldap_preinit (auth_passdb=0x5bbe8, args=0x5bc08 "/opt/RDGdovect/etc/dovecot-ldap.conf") at passdb-ldap.c:486 #2 0x2328c in passdb_preinit (auth=0x5b838, driver=0xffbefec0 "ldap", args=0x0, id=332176) at passdb.c:169 #3 0x17648 in auth_preinit () at auth.c:45 #4 0x1ff0c in drop_privileges () at main.c:195 #5 0x2024c in main (argc=0, argv=0xffbefb54) at main.c:319 and with scope left commented out: #0 0xff0cf600 in strcasecmp () from /usr/lib/libc.so.1 (gdb) bt #0 0xff0cf600 in strcasecmp () from /usr/lib/libc.so.1 #1 0x1df58 in scope2str (str=0x0) at db-ldap.c:116 #2 0x1ec4c in db_ldap_init ( config_path=0x5bc08 "/opt/RDGdovect/etc/dovecot-ldap.conf") at db-ldap.c:648 #3 0x246e8 in passdb_ldap_preinit (auth_passdb=0x5bbe8, args=0x5bc08 "/opt/RDGdovect/etc/dovecot-ldap.conf") at passdb-ldap.c:486 #4 0x2328c in passdb_preinit (auth=0x5b838, driver=0xffbefec0 "ldap", args=0x0, id=332176) at passdb.c:169 #5 0x17648 in auth_preinit () at auth.c:45 #6 0x1ff0c in drop_privileges () at main.c:195 #7 0x2024c in main (argc=0, argv=0xffbefb54) at main.c:319 If I don't define "deref" then I get an error in the dovecot log (but no crash) :- dovecot: Nov 07 12:36:45 Error: auth(default): LDAP: Unknown deref option 'subtree' I'll keep digging and see if I can find the cause, but has anybody else seen this? Chris -- --+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+- Christopher Wakelin, c.d.wakelin(a)reading.ac.uk IT Services Centre, The University of Reading, Tel: +44 (0)118 378 8439 Whiteknights, Reading, RG6 2AF, UK Fax: +44 (0)118 975 3094

2 1

[Dovecot] suspected bug in dovecot-ldap setup?
by Pedro Venda 07 Nov '06

07 Nov '06

Hi everyone, [first post: long and boring. beware!] I've been working on a virtual multidomain MX server with pop3 access. Accounting for users/domains is done via OpenLDAP with the Jamm[1] schema and dovecot is 1.0rc10 (dovecot-1.0-0_27.rc10.el4.at fetched as RPM from atrpms.net for CentOS 4.4). I intended to have authenticated binds but there was a problem with the user_filter directive being ignored: user_filter = (&(objectClass=JammMailAccount)(mail=%n@%d)(accountActive=TRUE) (delete=FALSE)) dovecot: Oct 26 16:20:58 Info: auth(default): client in: AUTH 1 PLAIN service=IMAP secured lip=::ffff:192.168.0.5 rip=::ffff:192.168.0.69 resp=<hidden> dovecot: Oct 26 16:20:58 Info: auth(default): ldap(dave@info.test,::ffff:192.168.0.69): bind search: base=o=hosting,dc=example,dc=com scope=subtree filter= **(&(objectClass=posixAccount(uid=dave(a)info.test))** dovecot: Oct 26 16:20:58 Info: auth(default): ldap(dave@info.test,::ffff:192.168.0.69): unknown user dovecot: Oct 26 16:20:59 Info: auth(default): client out: FAIL 1 user=dave(a)info.test dovecot: Oct 26 16:20:59 Info: imap-login: Disconnected: user=<dave(a)info.test>, method=PLAIN, rip=::ffff:192.168.0.69, lip=::ffff:192.168.0.5, TLS (nevermind the data, it's test only) As you can see from the info file, the search filter used was being (&(objectClass=posixAccount(uid=dave(a)info.test)) and not (&(objectClass=JammMailAccount)(mail=dave(a)info.test)(accountActive=TRUE) (delete=FALSE)). I sorted this out by trying to enable auth_bind_userdn: auth_bind_userdn = mail=%n@%d,jvd=%d,o=hosting,dc=example,dc=com Now, the login worked well and the debug info is as follows: dovecot: Oct 27 12:01:48 Info: auth(default): client in: AUTH 1 PLAIN service=IMAP lip=::ffff:192.168.0.5 rip=::ffff:192.168.0.69 resp=AGRhdmVAaW5mb y50ZXN0AFRlbXAuMTIz dovecot: Oct 27 12:01:48 Info: auth(default): client out: OK 1 user=dave(a)info.test dovecot: Oct 27 12:01:48 Info: auth(default): master in: REQUEST 1 10634 1 dovecot: Oct 27 12:01:48 Info: auth(default): ldap(dave@info.test,::ffff:192.168.0.69): base=o=hosting,dc=example,dc=com scope=subtree filter=(&(objectClass=JammMailAccount)(mail=dave(a)info.test) (accountActive=TRUE)(delete=FALSE)) fields=mailbox dovecot: Oct 27 12:01:48 Info: auth(default): master out: USER 1 dave(a)info.test mail=info.test/dave/ uid=5000 gid=5000 (nevermind the debug data, passwords, etc. it's test only) In this case, the search filter is ok: (&(objectClass=JammMailAccount)(mail=dave(a)info.test)(accountActive=TRUE) (delete=FALSE)) So aparently, the auth_bind_userdn directive that supposedly adds a performance gain by sparing one bind request, seems to interfere with the user_filter directive. I suspect this might be a bug, so here's my report. Is this a new issue? Thanks for surviving this far through this post, Best regards, Pedro Venda. [1]: [Java Mail Manager]: web applications to manage virtual email account information stored in an LDAP directory. (http://jamm.sourceforge.net) -- Pedro João Lopes Venda email: pjvenda at pjvenda org http://www.pjvenda.org

2 5

[Dovecot] Store outgoing mail in users mailbox
by Mark Ruys 07 Nov '06

07 Nov '06

This might be a MTA question, but because I use Dovecot as an LDA, maybe some can help me here. Our users would like that outgoing mail is automatically saved in some folder, say Sent. We use Postfix with virtual domains, Maildir and Dovecot+Sieve as LDA. Outgoing mail is relayed by our imap-server (with authentification of course, no open relay). Most people seem to advice Postfix sender_bcc_maps and Dovecot's deliver with the -m argument. But I can't get it work. I tried: In master.cf: dovecot-archive unix - n n - - pipe flags=DRhu user=mailowner:mailowner argv=/usr/libexec/dovecot/deliver -d ${recipient} -m Sent In main.cf: sender_bcc_maps = hash:/etc/postfix/sender_bcc_map In sender_bcc_map: tester(a)ruijs.cc dovecot-archive: But that doesn't work. It looks like "dovecot-archive:" should be a real email address, not a transport (this give an idea of my Postfix knowledge ;). Then I tried: In sender_bcc_map: tester(a)ruijs.cc tester+archive(a)ruijs.cc But I don't think Dovecot's LDA supports plus addressing. So my question is, has anyone here done a similar thing in a similar setting. If so, how did you configure it. Thans, Mark Oudenhof 14b, 4191 NW Geldermalsen, The Netherlands Web site and travel directions: www.in2sports.net Phone +31.345.473699 :: Mobile +31.6.51298623

2 1

[Dovecot] Upgrade from RC7 to RC10 didn't go too well...
by Ivo Truxa 06 Nov '06

06 Nov '06

I have the same problem after upgrading to RC10. Did you find a solution? Should I update to RC11 or rather downgrade back to an earlier version? Thanks, Ivo Truxa >>>>>>> original message >>>>>>> Hi, On the weekend I tried to upgrade from RC7 to RC10. Clearly, I have to change some things before I can do this. What does it take to get to RC10? As is, my mail client got an error trying to list messages in /INBOX (via IMAP) and the mail.err log shows the following messages: Oct 29 10:27:32 siona dovecot: IMAP(archangel): open(/var/mail/archangel/inbox, O_CREAT) failed: Not a directory Oct 29 10:27:32 siona dovecot: IMAP(archangel): mkdir_parents(/var/mail/archangel/.imap/INBOX) failed: Not a directory Oct 29 10:27:32 siona dovecot: IMAP(archangel): open() failed with subscription file /var/mail/archangel/.subscriptions: Not a directory My dovecot.conf includes default_mail_env = mbox:/var/mail/%u And other then enabling SSL, I've got a pretty vanilla configuration (e.g. nothing in the IMAP section at all, no odd namespaces...) /var/mail/archangel is an mbox file, why is dovecot trying to open files under there? I know at least part of the discussion has happened on the list before so I'm sorry for duplicating other questions. My TODO is about ten km long so I hope someone can at least give me a couple good pointers. Thanks in advance! -- Dominic Lepiane The IRMACS Centre

3 2

[Dovecot] v1.0 plans, rc11 tomorrow
by Timo Sirainen 06 Nov '06

06 Nov '06

As you can probably guess from my today's burst of activity, I'm no longer extremely busy. Actually it looks like for the next 3-4 weeks I don't have anything especially time consuming to do. So it's time to get Dovecot v1.0 released :) I've now read all the mails from this list again, and it looks like pretty much the only problems with rc10 was the mbox assert crash, which is now fixed. My TODO contains: v1.0 blocker: - inetd logins are broken? I should look more into this.. I only remembered this just now while writing this mail. New non-v1.0 blockers: - trash plugin is apparently broken? - mbox_min_index_size != 0 causes Invalid new transaction log sequence (4 >= 4) The old preferrably-fixed-for-v1.0 items are: - ldap auth is leaking memory? maybe not, maybe it's something else. - master leaks log fds with kqueue. I don't have a machine to test this on. Could someone give me an account in some BSD system for a while to test this? Anyway, I'll most likely release rc11 tomorrow, but it would be nice if you tested today's CVS snapshot already to see if I accidentally broke something. :) http://dovecot.org/nightly/dovecot-latest.tar.gz Oh and one thing that I wanted for Dovecot v1.0 was nice documentation. I think the current wiki is a bit chaotic. I started http://wiki.dovecot.org/NewIndex a long time ago. Maybe I should finish it finally and put it as the new main index..

9 16

[Dovecot] Auto-expire messages in a folder
by Mike Cisar 05 Nov '06

05 Nov '06

I have a Fedora 5 server running Dovecot (currently 1.0 rc10). The spam filter (amavis) automatically tags email (using plussed addressing) such that messages flagged as spam are sorted into a "spambox" folder by procmail. Seemed like a good idea at the time, but because of some legacy issues with filesystem quota also being in place, combined with most users connecting with POP3 rather than IMAP... spam doesn't stay in their inbox, they don't check their spambox and they are very quickly over quota. What I would like to do is stick with the "spambox" folder idea, but have any messages in that folder which are older than a certain number of days deleted automatically. Could this be done by Dovecot? If so how would dovecot know to visit all the user's mailboxes to do it... or would it only be able to do so when a user logged in via IMAP (as opposed to POP3)? If not, is anyone aware of a script that I could run in nightly maintenance to do a cleanup pass on all the mailboxes? I know there are any number of ways that this could be accomplished but I would like to do it as much within my existing framework as possible... sendmail/procmail/amavis on the delivery side, dovecot in the middle, horde/imp for webmail and whatever email client the end users have (likely Outlook/Outlook Express for the most part)... all pretty generic, standard mailbox formats... nothing fancy like data stored in mySQL or anything like that. As everyone encounters, the more parts you change, the more other parts you have to fix to be compatible with the changes :-) Obviously I would like the solution to also be as feature rich as I can at the same time (might as well wish for it all right :-). Maybe for the sake of the POP3 folks it would also be nice to generate a once-daily email with the names, subjects of the messages in the folder saying "here's what is in your spam folder, please log in to webmail to manage your spam" (and in a perfect world some sort of link to click on which could move the message from the spambox back into the inbox). Does anyone have any solutions they can share that run within a similar framework to what I have set up? The thing that I need in the immediate term is to purge the spam folder automatically, the mid-term goal is to evolve that into a sort of spam-processing center/solution for the users. Thanks for any suggestions! Cheers, >>>>> Mike <<<<<

3 2

[Dovecot] ~/.maildir preferable to %h/Maildir and ~/Maildir?
by Jeff Kowalczyk 05 Nov '06

05 Nov '06

I have a recently deployed dovecot server and am readying another. Upon updating to rc12, I note the following change in the default dovecot.conf file: -default_mail_env = mbox:/var/spool/mail/%u:INDEX=/var/dovecot/%u +mail_location = maildir:~/.maildir Integrating this change to my local dovecot.conf: # formerly used default_mail_env = maildir:%h/Maildir # dovecot default mail_location = maildir:~/.maildir mail_location = maildir:~/Maildir With unix users of the form: myuser:x:505:100:My User:/home/myuser:/sbin/nologin each having ~/Maildir, should I: 1) use the ~/.maildir form over ~/Maildir. 2) use the ~ instead of %h 3) do anything for dovecot's benefit (reindex, etc.) besides a per-user 'mv ~/Maildir ~/.maildir' if 1). I came straight from an ancient sendmail mbox setup to dovecot, so I want to do things the best-pracitce IMAP/dovecot way. Thanks.

3 4

[Dovecot] RC11 Build Failure on FreeBSD 6.1
by Tim Wilde 05 Nov '06

05 Nov '06

I just ran into a build failure on Dovecot 1.0RC11 on FreeBSD 6.1. Identical command sequence for the build worked fine for RC10. uname -a: FreeBSD thor.krellis.org 6.1-RELEASE-p5 FreeBSD 6.1-RELEASE-p5 #0: Fri Sep 1 01:47:32 EDT 2006 root@jail7.jvds.com:/usr/obj/usr/src/sys/JAIL7 i386 Configured with a straight ./configure, no options, no problems reported during configure, but make failed with: if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT mountpoint.o -MD -MP -MF ".deps/mountpoint.Tpo" -c -o mountpoint.o mountpoint.c; then mv -f ".deps/mountpoint.Tpo" ".deps/mountpoint.Po"; else rm -f ".deps/mountpoint.Tpo"; exit 1; fi mountpoint.c:11:30: #if with no expression mountpoint.c:40: warning: unused parameter 'path' mountpoint.c:40: warning: unused parameter 'pool' *** Error code 1 Stop in /usr/home/tim/build/dovecot-1.0.rc11/src/lib. *** Error code 1 Stop in /usr/home/tim/build/dovecot-1.0.rc11/src. *** Error code 1 Stop in /usr/home/tim/build/dovecot-1.0.rc11. *** Error code 1 Stop in /usr/home/tim/build/dovecot-1.0.rc11. Full output of everything I did after untarring (I apologize in advance for any bad wrapping, I can attach as text/plain if necessary for diagnosis): [tim@thor ~/build/dovecot-1.0.rc11]$ ./configure checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... no checking for mawk... no checking for nawk... nawk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for style of include used by make... GNU checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... gcc3 checking for library containing strerror... none required checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking dependency style of gcc... (cached) gcc3 checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ANSI C header files... yes checking for inline... inline checking build system type... i386-unknown-freebsd6.1 checking host system type... i386-unknown-freebsd6.1 checking for a sed that does not truncate output... /usr/bin/sed checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for /usr/bin/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm -B checking whether ln -s works... yes checking how to recognise dependent libraries... pass_all checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking how to run the C++ preprocessor... g++ -E checking for g77... no checking for f77... f77 checking whether we are using the GNU Fortran 77 compiler... yes checking whether f77 accepts -g... yes checking the maximum length of command line arguments... 196608 checking command to parse /usr/bin/nm -B output from gcc object... ok checking for objdir... .libs checking for ar... ar checking for ranlib... ranlib checking for strip... strip checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC checking if gcc PIC flag -fPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... yes checking dynamic linker characteristics... freebsd6.1 ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by g++... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC checking if g++ PIC flag -fPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... freebsd6.1 ld.so checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for f77 option to produce PIC... -fPIC checking if f77 PIC flag -fPIC works... yes checking if f77 static flag -static works... yes checking if f77 supports -c -o file.o... yes checking whether the f77 linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... freebsd6.1 ld.so checking how to hardcode library paths into programs... immediate checking for ld used by GCC... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for shared library run path origin... /usr/local/bin/bash: ./config.rpath: No such file or directory done checking for iconv... no, consider installing GNU libiconv checking for strings.h... (cached) yes checking for stdint.h... (cached) yes checking for unistd.h... (cached) yes checking dirent.h usability... yes checking dirent.h presence... yes checking for dirent.h... yes checking sys/uio.h usability... yes checking sys/uio.h presence... yes checking for sys/uio.h... yes checking sys/sysmacros.h usability... no checking sys/sysmacros.h presence... no checking for sys/sysmacros.h... no checking sys/resource.h usability... yes checking sys/resource.h presence... yes checking for sys/resource.h... yes checking sys/select.h usability... yes checking sys/select.h presence... yes checking for sys/select.h... yes checking libgen.h usability... yes checking libgen.h presence... yes checking for libgen.h... yes checking sys/quota.h usability... no checking sys/quota.h presence... no checking for sys/quota.h... no checking sys/fs/ufs_quota.h usability... no checking sys/fs/ufs_quota.h presence... no checking for sys/fs/ufs_quota.h... no checking ufs/ufs/quota.h usability... yes checking ufs/ufs/quota.h presence... yes checking for ufs/ufs/quota.h... yes checking jfs/quota.h usability... no checking jfs/quota.h presence... no checking for jfs/quota.h... no checking mntent.h usability... no checking mntent.h presence... no checking for mntent.h... no checking sys/mnttab.h usability... no checking sys/mnttab.h presence... no checking for sys/mnttab.h... no checking sys/event.h usability... yes checking sys/event.h presence... yes checking for sys/event.h... yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking sys/mkdev.h usability... no checking sys/mkdev.h presence... no checking for sys/mkdev.h... no checking linux/dqblk_xfs.h usability... no checking linux/dqblk_xfs.h presence... no checking for linux/dqblk_xfs.h... no checking xfs/xqm.h usability... no checking xfs/xqm.h presence... no checking for xfs/xqm.h... no checking sasl.h usability... no checking sasl.h presence... no checking for sasl.h... no checking sasl/sasl.h usability... no checking sasl/sasl.h presence... no checking for sasl/sasl.h... no checking for socket... yes checking for inet_addr... yes checking for fdatasync... no checking for fdatasync in -lrt... no checking for fcntl... yes checking for flock... yes checking for lockf... yes checking for inet_aton... yes checking for sigaction... yes checking for getpagesize... yes checking for madvise... yes checking for strcasecmp... yes checking for stricmp... no checking for vsnprintf... yes checking for vsyslog... yes checking for writev... yes checking for pread... yes checking for setrlimit... yes checking for setproctitle... yes checking for seteuid... yes checking for setreuid... yes checking for setegid... yes checking for setresgid... yes checking for strtoull... yes checking for strtouq... yes checking for setpriority... yes checking for quotactl... yes checking for getmntent... no checking for kqueue... yes checking for kevent... yes checking for getrusage... yes checking for poll... yes checking if we can use inotify... "no" checking if we can use dnotify... "no" checking for int... yes checking size of int... 4 checking for long... yes checking size of long... 4 checking for void *... yes checking size of void *... 4 checking for long long... yes checking size of long long... 8 checking for _Bool... yes checking for uoff_t... no checking type of off_t... long long checking whether size_t is signed... no checking type of size_t... unsigned int checking for stdint.h... (cached) yes checking for uintmax_t... yes checking for uint_fast32_t... yes checking for socklen_t... yes checking for /dev/urandom... yes checking for tm_gmtoff... yes checking how large time_t values gmtime() accepts... 32 checking for struct iovec... yes checking Linux compatible mremap()... no checking whether shared mmaps get updated by write()s... yes checking whether fd passing works... yes checking for sendfile in -lsendfile... no checking Linux compatible sendfile()... no checking FreeBSD compatible sendfile()... yes checking if we should use _XPG6 macro for crypt()... yes checking if statvfs.f_mntfromname exists... no checking if statfs.f_mntfromname exists... yes checking if struct dqblk.dqb_curblocks exists... yes checking if struct dqblk.dqb_curspace exists... no checking if struct Q_QUOTACTL ioctl exists... no checking for an implementation of va_copy()... yes checking for an implementation of __va_copy()... no checking whether va_lists can be copied by value... yes checking for SSL_read in -lssl... yes checking openssl/ssl.h usability... yes checking openssl/ssl.h presence... yes checking for openssl/ssl.h... yes checking openssl/err.h usability... yes checking openssl/err.h presence... yes checking for openssl/err.h... yes checking for getspnam... no checking for pam_start in -lpam... yes checking security/pam_appl.h usability... yes checking security/pam_appl.h presence... yes checking for security/pam_appl.h... yes checking pam/pam_appl.h usability... no checking pam/pam_appl.h presence... no checking for pam/pam_appl.h... no checking for pam_setcred in -lpam... yes checking for auth_userokay... no checking for vpopmail configuration at ~vpopmail/etc/lib_deps... not found checking for crypt in -lcrypt... yes checking for dlopen... yes checking whether byte ordering is bigendian... no checking for IPv6... yes checking zlib.h usability... yes checking zlib.h presence... yes checking for zlib.h... yes configure: creating ./config.status config.status: creating Makefile config.status: creating doc/Makefile config.status: creating src/Makefile config.status: creating src/lib/Makefile config.status: creating src/lib-sql/Makefile config.status: creating src/lib-auth/Makefile config.status: creating src/lib-charset/Makefile config.status: creating src/lib-dict/Makefile config.status: creating src/lib-imap/Makefile config.status: creating src/lib-index/Makefile config.status: creating src/lib-mail/Makefile config.status: creating src/lib-ntlm/Makefile config.status: creating src/lib-settings/Makefile config.status: creating src/lib-storage/Makefile config.status: creating src/lib-storage/index/Makefile config.status: creating src/lib-storage/index/maildir/Makefile config.status: creating src/lib-storage/index/mbox/Makefile config.status: creating src/lib-storage/index/dbox/Makefile config.status: creating src/lib-storage/subscription-file/Makefile config.status: creating src/lib-storage/register/Makefile config.status: creating src/auth/Makefile config.status: creating src/deliver/Makefile config.status: creating src/dict/Makefile config.status: creating src/imap/Makefile config.status: creating src/imap-login/Makefile config.status: creating src/login-common/Makefile config.status: creating src/master/Makefile config.status: creating src/pop3/Makefile config.status: creating src/pop3-login/Makefile config.status: creating src/util/Makefile config.status: creating src/plugins/Makefile config.status: creating src/plugins/acl/Makefile config.status: creating src/plugins/convert/Makefile config.status: creating src/plugins/quota/Makefile config.status: creating src/plugins/imap-quota/Makefile config.status: creating src/plugins/trash/Makefile config.status: creating src/plugins/zlib/Makefile config.status: creating stamp.h config.status: creating dovecot-config.in config.status: creating config.h config.status: executing depfiles commands Install prefix ...................... : /usr/local File offsets ........................ : 64bit I/O loop method ..................... : poll File change notification method ..... : none Building with SSL support ........... : yes (OpenSSL) Building with IPv6 support .......... : yes Building with pop3 server ........... : yes Building with mail delivery agent .. : yes Building with GSSAPI support ........ : no Building with user database modules . : static prefetch passwd passwd-file checkpassword (modules) Building with password lookup modules : passwd passwd-file pam checkpassword (modules) Building with SQL drivers ............: [tim@thor ~/build/dovecot-1.0.rc11]$ make make all-recursive Making all in src Making all in lib if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT base64.o -MD -MP -MF ".deps/base64.Tpo" -c -o base64.o base64.c; then mv -f ".deps/base64.Tpo" ".deps/base64.Po"; else rm -f ".deps/base64.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT bsearch-insert-pos.o -MD -MP -MF ".deps/bsearch-insert-pos.Tpo" -c -o bsearch-insert-pos.o bsearch-insert-pos.c; then mv -f ".deps/bsearch-insert-pos.Tpo" ".deps/bsearch-insert-pos.Po"; else rm -f ".deps/bsearch-insert-pos.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT buffer.o -MD -MP -MF ".deps/buffer.Tpo" -c -o buffer.o buffer.c; then mv -f ".deps/buffer.Tpo" ".deps/buffer.Po"; else rm -f ".deps/buffer.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT close-keep-errno.o -MD -MP -MF ".deps/close-keep-errno.Tpo" -c -o close-keep-errno.o close-keep-errno.c; then mv -f ".deps/close-keep-errno.Tpo" ".deps/close-keep-errno.Po"; else rm -f ".deps/close-keep-errno.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT compat.o -MD -MP -MF ".deps/compat.Tpo" -c -o compat.o compat.c; then mv -f ".deps/compat.Tpo" ".deps/compat.Po"; else rm -f ".deps/compat.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT data-stack.o -MD -MP -MF ".deps/data-stack.Tpo" -c -o data-stack.o data-stack.c; then mv -f ".deps/data-stack.Tpo" ".deps/data-stack.Po"; else rm -f ".deps/data-stack.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT env-util.o -MD -MP -MF ".deps/env-util.Tpo" -c -o env-util.o env-util.c; then mv -f ".deps/env-util.Tpo" ".deps/env-util.Po"; else rm -f ".deps/env-util.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT failures.o -MD -MP -MF ".deps/failures.Tpo" -c -o failures.o failures.c; then mv -f ".deps/failures.Tpo" ".deps/failures.Po"; else rm -f ".deps/failures.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT fd-close-on-exec.o -MD -MP -MF ".deps/fd-close-on-exec.Tpo" -c -o fd-close-on-exec.o fd-close-on-exec.c; then mv -f ".deps/fd-close-on-exec.Tpo" ".deps/fd-close-on-exec.Po"; else rm -f ".deps/fd-close-on-exec.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT fd-set-nonblock.o -MD -MP -MF ".deps/fd-set-nonblock.Tpo" -c -o fd-set-nonblock.o fd-set-nonblock.c; then mv -f ".deps/fd-set-nonblock.Tpo" ".deps/fd-set-nonblock.Po"; else rm -f ".deps/fd-set-nonblock.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT fdpass.o -MD -MP -MF ".deps/fdpass.Tpo" -c -o fdpass.o fdpass.c; then mv -f ".deps/fdpass.Tpo" ".deps/fdpass.Po"; else rm -f ".deps/fdpass.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT file-cache.o -MD -MP -MF ".deps/file-cache.Tpo" -c -o file-cache.o file-cache.c; then mv -f ".deps/file-cache.Tpo" ".deps/file-cache.Po"; else rm -f ".deps/file-cache.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT file-copy.o -MD -MP -MF ".deps/file-copy.Tpo" -c -o file-copy.o file-copy.c; then mv -f ".deps/file-copy.Tpo" ".deps/file-copy.Po"; else rm -f ".deps/file-copy.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT file-dotlock.o -MD -MP -MF ".deps/file-dotlock.Tpo" -c -o file-dotlock.o file-dotlock.c; then mv -f ".deps/file-dotlock.Tpo" ".deps/file-dotlock.Po"; else rm -f ".deps/file-dotlock.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT file-lock.o -MD -MP -MF ".deps/file-lock.Tpo" -c -o file-lock.o file-lock.c; then mv -f ".deps/file-lock.Tpo" ".deps/file-lock.Po"; else rm -f ".deps/file-lock.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT file-set-size.o -MD -MP -MF ".deps/file-set-size.Tpo" -c -o file-set-size.o file-set-size.c; then mv -f ".deps/file-set-size.Tpo" ".deps/file-set-size.Po"; else rm -f ".deps/file-set-size.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT hash.o -MD -MP -MF ".deps/hash.Tpo" -c -o hash.o hash.c; then mv -f ".deps/hash.Tpo" ".deps/hash.Po"; else rm -f ".deps/hash.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT hex-binary.o -MD -MP -MF ".deps/hex-binary.Tpo" -c -o hex-binary.o hex-binary.c; then mv -f ".deps/hex-binary.Tpo" ".deps/hex-binary.Po"; else rm -f ".deps/hex-binary.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT hex-dec.o -MD -MP -MF ".deps/hex-dec.Tpo" -c -o hex-dec.o hex-dec.c; then mv -f ".deps/hex-dec.Tpo" ".deps/hex-dec.Po"; else rm -f ".deps/hex-dec.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT hmac-md5.o -MD -MP -MF ".deps/hmac-md5.Tpo" -c -o hmac-md5.o hmac-md5.c; then mv -f ".deps/hmac-md5.Tpo" ".deps/hmac-md5.Po"; else rm -f ".deps/hmac-md5.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT home-expand.o -MD -MP -MF ".deps/home-expand.Tpo" -c -o home-expand.o home-expand.c; then mv -f ".deps/home-expand.Tpo" ".deps/home-expand.Po"; else rm -f ".deps/home-expand.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT hostpid.o -MD -MP -MF ".deps/hostpid.Tpo" -c -o hostpid.o hostpid.c; then mv -f ".deps/hostpid.Tpo" ".deps/hostpid.Po"; else rm -f ".deps/hostpid.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT imem.o -MD -MP -MF ".deps/imem.Tpo" -c -o imem.o imem.c; then mv -f ".deps/imem.Tpo" ".deps/imem.Po"; else rm -f ".deps/imem.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT iostream.o -MD -MP -MF ".deps/iostream.Tpo" -c -o iostream.o iostream.c; then mv -f ".deps/iostream.Tpo" ".deps/iostream.Po"; else rm -f ".deps/iostream.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT istream.o -MD -MP -MF ".deps/istream.Tpo" -c -o istream.o istream.c; then mv -f ".deps/istream.Tpo" ".deps/istream.Po"; else rm -f ".deps/istream.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT istream-data.o -MD -MP -MF ".deps/istream-data.Tpo" -c -o istream-data.o istream-data.c; then mv -f ".deps/istream-data.Tpo" ".deps/istream-data.Po"; else rm -f ".deps/istream-data.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT istream-file.o -MD -MP -MF ".deps/istream-file.Tpo" -c -o istream-file.o istream-file.c; then mv -f ".deps/istream-file.Tpo" ".deps/istream-file.Po"; else rm -f ".deps/istream-file.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT istream-limit.o -MD -MP -MF ".deps/istream-limit.Tpo" -c -o istream-limit.o istream-limit.c; then mv -f ".deps/istream-limit.Tpo" ".deps/istream-limit.Po"; else rm -f ".deps/istream-limit.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT istream-mmap.o -MD -MP -MF ".deps/istream-mmap.Tpo" -c -o istream-mmap.o istream-mmap.c; then mv -f ".deps/istream-mmap.Tpo" ".deps/istream-mmap.Po"; else rm -f ".deps/istream-mmap.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT istream-seekable.o -MD -MP -MF ".deps/istream-seekable.Tpo" -c -o istream-seekable.o istream-seekable.c; then mv -f ".deps/istream-seekable.Tpo" ".deps/istream-seekable.Po"; else rm -f ".deps/istream-seekable.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT ioloop.o -MD -MP -MF ".deps/ioloop.Tpo" -c -o ioloop.o ioloop.c; then mv -f ".deps/ioloop.Tpo" ".deps/ioloop.Po"; else rm -f ".deps/ioloop.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT ioloop-iolist.o -MD -MP -MF ".deps/ioloop-iolist.Tpo" -c -o ioloop-iolist.o ioloop-iolist.c; then mv -f ".deps/ioloop-iolist.Tpo" ".deps/ioloop-iolist.Po"; else rm -f ".deps/ioloop-iolist.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT ioloop-notify-none.o -MD -MP -MF ".deps/ioloop-notify-none.Tpo" -c -o ioloop-notify-none.o ioloop-notify-none.c; then mv -f ".deps/ioloop-notify-none.Tpo" ".deps/ioloop-notify-none.Po"; else rm -f ".deps/ioloop-notify-none.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT ioloop-notify-dn.o -MD -MP -MF ".deps/ioloop-notify-dn.Tpo" -c -o ioloop-notify-dn.o ioloop-notify-dn.c; then mv -f ".deps/ioloop-notify-dn.Tpo" ".deps/ioloop-notify-dn.Po"; else rm -f ".deps/ioloop-notify-dn.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT ioloop-notify-inotify.o -MD -MP -MF ".deps/ioloop-notify-inotify.Tpo" -c -o ioloop-notify-inotify.o ioloop-notify-inotify.c; then mv -f ".deps/ioloop-notify-inotify.Tpo" ".deps/ioloop-notify-inotify.Po"; else rm -f ".deps/ioloop-notify-inotify.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT ioloop-notify-kqueue.o -MD -MP -MF ".deps/ioloop-notify-kqueue.Tpo" -c -o ioloop-notify-kqueue.o ioloop-notify-kqueue.c; then mv -f ".deps/ioloop-notify-kqueue.Tpo" ".deps/ioloop-notify-kqueue.Po"; else rm -f ".deps/ioloop-notify-kqueue.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT ioloop-poll.o -MD -MP -MF ".deps/ioloop-poll.Tpo" -c -o ioloop-poll.o ioloop-poll.c; then mv -f ".deps/ioloop-poll.Tpo" ".deps/ioloop-poll.Po"; else rm -f ".deps/ioloop-poll.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT ioloop-select.o -MD -MP -MF ".deps/ioloop-select.Tpo" -c -o ioloop-select.o ioloop-select.c; then mv -f ".deps/ioloop-select.Tpo" ".deps/ioloop-select.Po"; else rm -f ".deps/ioloop-select.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT ioloop-epoll.o -MD -MP -MF ".deps/ioloop-epoll.Tpo" -c -o ioloop-epoll.o ioloop-epoll.c; then mv -f ".deps/ioloop-epoll.Tpo" ".deps/ioloop-epoll.Po"; else rm -f ".deps/ioloop-epoll.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT ioloop-kqueue.o -MD -MP -MF ".deps/ioloop-kqueue.Tpo" -c -o ioloop-kqueue.o ioloop-kqueue.c; then mv -f ".deps/ioloop-kqueue.Tpo" ".deps/ioloop-kqueue.Po"; else rm -f ".deps/ioloop-kqueue.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT lib.o -MD -MP -MF ".deps/lib.Tpo" -c -o lib.o lib.c; then mv -f ".deps/lib.Tpo" ".deps/lib.Po"; else rm -f ".deps/lib.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT lib-signals.o -MD -MP -MF ".deps/lib-signals.Tpo" -c -o lib-signals.o lib-signals.c; then mv -f ".deps/lib-signals.Tpo" ".deps/lib-signals.Po"; else rm -f ".deps/lib-signals.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT md4.o -MD -MP -MF ".deps/md4.Tpo" -c -o md4.o md4.c; then mv -f ".deps/md4.Tpo" ".deps/md4.Po"; else rm -f ".deps/md4.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT md5.o -MD -MP -MF ".deps/md5.Tpo" -c -o md5.o md5.c; then mv -f ".deps/md5.Tpo" ".deps/md5.Po"; else rm -f ".deps/md5.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT mempool.o -MD -MP -MF ".deps/mempool.Tpo" -c -o mempool.o mempool.c; then mv -f ".deps/mempool.Tpo" ".deps/mempool.Po"; else rm -f ".deps/mempool.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT mempool-alloconly.o -MD -MP -MF ".deps/mempool-alloconly.Tpo" -c -o mempool-alloconly.o mempool-alloconly.c; then mv -f ".deps/mempool-alloconly.Tpo" ".deps/mempool-alloconly.Po"; else rm -f ".deps/mempool-alloconly.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT mempool-datastack.o -MD -MP -MF ".deps/mempool-datastack.Tpo" -c -o mempool-datastack.o mempool-datastack.c; then mv -f ".deps/mempool-datastack.Tpo" ".deps/mempool-datastack.Po"; else rm -f ".deps/mempool-datastack.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT mempool-system.o -MD -MP -MF ".deps/mempool-system.Tpo" -c -o mempool-system.o mempool-system.c; then mv -f ".deps/mempool-system.Tpo" ".deps/mempool-system.Po"; else rm -f ".deps/mempool-system.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT mempool-unsafe-datastack.o -MD -MP -MF ".deps/mempool-unsafe-datastack.Tpo" -c -o mempool-unsafe-datastack.o mempool-unsafe-datastack.c; then mv -f ".deps/mempool-unsafe-datastack.Tpo" ".deps/mempool-unsafe-datastack.Po"; else rm -f ".deps/mempool-unsafe-datastack.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT mkdir-parents.o -MD -MP -MF ".deps/mkdir-parents.Tpo" -c -o mkdir-parents.o mkdir-parents.c; then mv -f ".deps/mkdir-parents.Tpo" ".deps/mkdir-parents.Po"; else rm -f ".deps/mkdir-parents.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT mmap-anon.o -MD -MP -MF ".deps/mmap-anon.Tpo" -c -o mmap-anon.o mmap-anon.c; then mv -f ".deps/mmap-anon.Tpo" ".deps/mmap-anon.Po"; else rm -f ".deps/mmap-anon.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT mmap-util.o -MD -MP -MF ".deps/mmap-util.Tpo" -c -o mmap-util.o mmap-util.c; then mv -f ".deps/mmap-util.Tpo" ".deps/mmap-util.Po"; else rm -f ".deps/mmap-util.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT module-dir.o -MD -MP -MF ".deps/module-dir.Tpo" -c -o module-dir.o module-dir.c; then mv -f ".deps/module-dir.Tpo" ".deps/module-dir.Po"; else rm -f ".deps/module-dir.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT mountpoint.o -MD -MP -MF ".deps/mountpoint.Tpo" -c -o mountpoint.o mountpoint.c; then mv -f ".deps/mountpoint.Tpo" ".deps/mountpoint.Po"; else rm -f ".deps/mountpoint.Tpo"; exit 1; fi mountpoint.c:11:30: #if with no expression mountpoint.c:40: warning: unused parameter 'path' mountpoint.c:40: warning: unused parameter 'pool' *** Error code 1 Stop in /usr/home/tim/build/dovecot-1.0.rc11/src/lib. *** Error code 1 Stop in /usr/home/tim/build/dovecot-1.0.rc11/src. *** Error code 1 Stop in /usr/home/tim/build/dovecot-1.0.rc11. *** Error code 1 Stop in /usr/home/tim/build/dovecot-1.0.rc11. I don't /think/ I did anything or changed anything from rc10 to rc11 that would cause this. Any assistance would be greatly appreciated. Regards, Tim Wilde

3 3

[Dovecot] Sending email using IMAP
by Marc Perkel 05 Nov '06

05 Nov '06

This is something for after the 1.0 release but I think it's important and I'm going to try to figure out how to make it happen. I'd like to see some way to pass outgoing email from Thunderbird back to dovecot through some new command that we would have to make up. Email would be sent back over the IMAP connection and when Dovecot gets it dovecot would hand it off to an SMTP server that would deliver it. If a crude experimental spec can be written I'll try to find someone on the Thunderbird side to write some sort of module to talk to it. The reason for this is that I think that the elimination of SMTP from the client is a big step to control spam. The idea being that if IMAP can transfer outgoing mail the SMTP wouldn't be necessary for clients and we can block port 25 on windows machines and viruses can't send email. And the virus wouldn't have access to the IMAP password so viruses can't authenticate to send mail. So - the key question is - what would it take to create an outgoing spec for sending email over IMAP? Like to see something clean and simple.

20 36

[Dovecot] trash plugin not working as expected
by Robert Schetterer 04 Nov '06

04 Nov '06

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi @ll ,i use dovecot 1.rc7 setting in dovecot.conf protocol imap { mail_plugins = quota imap_quota } protocol pop3 { mail_plugins = quota } plugin { quota = maildir trash = /etc/dovecot/dovecot-trash.conf } dovecot-trash.conf file 1 Sent results in Disconnected: Too many invalid IMAP commands when i try to sent mails from a mailbox which is nearly full with inbox and Sent mails folder I expected the oldest mail in Sent to be deleted before copy to Sent after deliver. as described here http://wiki.dovecot.org/Plugins/Trash the client was squirrelmail 1.48 the setup works very nice without having tras installed sombody with an idea, or did i miss something in the conf or missunderstood the wiki? - -- Mit freundlichen Gruessen Best Regards Robert Schetterer robert_at_schetterer_dot_org Munich / Bavaria / Germany https://www.schetterer.org https://www.schetterer.com/public-gpg-robert-schetterer.key -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (MingW32) iD8DBQFFL9a6NxddAhXBw7QRAsusAKCeeGoK5ePoc7ccO6UHbsextBbJSwCfd1ry aBhnaGZSVizfwunNU0iZYZ4= =jtrL -----END PGP SIGNATURE----- -- Diese Nachricht wurde auf Viren und andere gefährliche Inhalte untersucht und ist - aktuelle Virenscanner vorausgesetzt - sauber.

2 1

[Dovecot] INIT startup script for Fedora Core 5
by jaysen＠emtjaysen.net 04 Nov '06

04 Nov '06

4 3

[Dovecot] MySQL Configuration
by Gerard Seibert 04 Nov '06

04 Nov '06

Dovecot 1.0.rc10 FreeBSD 6.1 This is probably a dumb question; however, I have never let a little thing like that bother me in the past. In the 'dovecot.conf' file there are the follow two sections: # SQL database passdb sql { # Path for SQL configuration file, see doc/dovecot-sql.conf for example args = /usr/local/etc/dovecot-sql.conf } userdb sql { # Path for SQL configuration file, see doc/dovecot-sql.conf for example args = /usr/local/etc/dovecot-sql.conf } I keep the 'users' and their respective 'passwords' in the same MySQL database. I am not sure why I wouldn't. Therefore, would it not make more sense to have just one MySQL configuration line in the 'dovecot.conf' file rather than two, or am I missing something here? -- Gerard Seibert gerard(a)seibercom.net Laws are like sausages. It's better not to see them being made. Otto von Bismarck

2 1

[Dovecot] auth-req-handler.c adds spurious tab
by Chris Laif 04 Nov '06

04 Nov '06

If the auth backend (postgresql in my case) returns extra fields, and all of these extra_fields begin with 'userdb_', the auth_callback functions adds an unwanted extra tab at the end of the response: auth(default): client out: OK^I8^Iuser=foo@bar^I This extra tab at the end confuses exim's dovecot-auth handler (the exim-dovecot auth handler does not correctly count the number of returned fields then (side note: the code on exim's side should probably be cleaned up as well)). A quick fix is attached below. Chris --- src/auth/auth-request-handler.c.orig 2006-11-03 13:10:35.000000000 +0100 +++ src/auth/auth-request-handler.c 2006-11-03 13:08:32.000000000 +0100 @@ -139,6 +139,10 @@ str_append(str, fields[src]); } } + + if (str_len(str) == 0) + return NULL; + return str_c(str); }

2 1

[Dovecot] mbox sync: Expunged message reappeared in mailbox
by Jim Garrison 04 Nov '06

04 Nov '06

Starting at 05:32 this morning, one user on my dovecot server is receiving hundreds of copies of old email. This is a short excerpt from my dovecot.log showing the problem: > dovecot: Nov 03 05:27:02 Info: pop3-login: Login: > user=<howard(a)obfusca.ted>, method=PLAIN, rip=::ffff:81.44.31.210, > lip=::ffff:zz.zz.zz.zz, TLS > dovecot: Nov 03 05:27:02 Info: POP3(howard(a)obfusca.ted): Disconnected: > Logged out top=0/0, retr=0/0, del=0/0, size=0 > dovecot: Nov 03 05:32:01 Error: POP3(joyce(a)obfusca.ted): mbox sync: > Expunged message reappeared in mailbox > /var/mail/vhosts/obfusca.ted/joyce (UID 1443 < 1446, seq=2, idx_msgs=0) > dovecot: Nov 03 05:32:01 Info: pop3-login: Login: > user=<joyce(a)obfusca.ted>, method=PLAIN, rip=::ffff:67.9.149.201, > lip=::ffff:zz.zz.zz.zz, TLS > dovecot: Nov 03 05:32:02 Info: pop3-login: Login: > user=<howard(a)obfusca.ted>, method=PLAIN, rip=::ffff:81.44.31.210, > lip=::ffff:zz.zz.zz.zz, TLS > dovecot: Nov 03 05:32:03 Info: POP3(joyce(a)obfusca.ted): Disconnected: > Logged out top=0/0, retr=3/163473, del=3/3, size=163419 > dovecot: Nov 03 05:32:03 Error: POP3(joyce(a)obfusca.ted): mbox sync: > Expunged message reappeared in mailbox > /var/mail/vhosts/obfusca.ted/joyce (UID 1443 < 1449, seq=2, idx_msgs=0) > dovecot: Nov 03 05:32:03 Info: POP3(howard(a)obfusca.ted): Disconnected: > Logged out top=0/0, retr=0/0, del=0/0, size=0 > dovecot: Nov 03 05:37:02 Info: pop3-login: Login: > user=<howard(a)obfusca.ted>, method=PLAIN, rip=::ffff:81.44.31.210, > lip=::ffff:zz.zz.zz.zz, TLS > dovecot: Nov 03 05:37:03 Info: POP3(howard(a)obfusca.ted): Disconnected: > Logged out top=0/0, retr=0/0, del=0/3, size=0 > dovecot: Nov 03 05:42:01 Info: pop3-login: Login: > user=<joyce(a)obfusca.ted>, method=PLAIN, rip=::ffff:67.9.149.201, > lip=::ffff:zz.zz.zz.zz, TLS > dovecot: Nov 03 05:42:02 Info: pop3-login: Login: > user=<howard(a)obfusca.ted>, method=PLAIN, rip=::ffff:81.44.31.210, > lip=::ffff:zz.zz.zz.zz, TLS > dovecot: Nov 03 05:42:02 Info: POP3(howard(a)obfusca.ted): Disconnected: > Logged out top=0/0, retr=0/0, del=0/0, size=0 > dovecot: Nov 03 05:42:03 Info: POP3(joyce(a)obfusca.ted): Disconnected: > Logged out top=0/0, retr=3/163461, del=3/3, size=0 > dovecot: Nov 03 05:47:02 Info: pop3-login: Login: > user=<howard(a)obfusca.ted>, method=PLAIN, rip=::ffff:81.44.31.210, > lip=::ffff:zz.zz.zz.zz, TLS > dovecot: Nov 03 05:47:02 Info: POP3(howard(a)obfusca.ted): Disconnected: > Logged out top=0/0, retr=0/0, del=0/0, size=0 > dovecot: Nov 03 05:52:01 Error: POP3(joyce(a)obfusca.ted): mbox sync: > Expunged message reappeared in mailbox > /var/mail/vhosts/obfusca.ted/joyce (UID 1449 < 1452, seq=2, idx_msgs=0) > dovecot: Nov 03 05:52:01 Info: pop3-login: Login: > user=<joyce(a)obfusca.ted>, method=PLAIN, rip=::ffff:67.9.149.201, > lip=::ffff:zz.zz.zz.zz, TLS > dovecot: Nov 03 05:52:02 Info: pop3-login: Login: > user=<howard(a)obfusca.ted>, method=PLAIN, rip=::ffff:81.44.31.210, > lip=::ffff:zz.zz.zz.zz, TLS > dovecot: Nov 03 05:52:02 Info: POP3(howard(a)obfusca.ted): Disconnected: > Logged out top=0/0, retr=0/0, del=0/0, size=0 > dovecot: Nov 03 05:52:03 Info: POP3(joyce(a)obfusca.ted): Disconnected: > Logged out top=0/0, retr=3/163473, del=3/3, size=163419 > dovecot: Nov 03 05:52:03 Error: POP3(joyce(a)obfusca.ted): mbox sync: > Expunged message reappeared in mailbox > /var/mail/vhosts/obfusca.ted/joyce (UID 1449 < 1455, seq=2, idx_msgs=0) > dovecot: Nov 03 05:57:02 Info: pop3-login: Login: > user=<howard(a)obfusca.ted>, method=PLAIN, rip=::ffff:81.44.31.210, > lip=::ffff:zz.zz.zz.zz, TLS > dovecot: Nov 03 05:57:03 Info: POP3(howard(a)obfusca.ted): Disconnected: > Logged out top=0/0, retr=0/0, del=0/3, size=0 > dovecot: Nov 03 06:02:01 Info: pop3-login: Login: > user=<joyce(a)obfusca.ted>, method=PLAIN, rip=::ffff:67.9.149.201, > lip=::ffff:zz.zz.zz.zz, TLS > dovecot: Nov 03 06:02:02 Info: pop3-login: Login: > user=<howard(a)obfusca.ted>, method=PLAIN, rip=::ffff:81.44.31.210, > lip=::ffff:zz.zz.zz.zz, TLS > dovecot: Nov 03 06:02:02 Info: POP3(howard(a)obfusca.ted): Disconnected: > Logged out top=0/0, retr=0/0, del=0/0, size=0 > dovecot: Nov 03 06:02:02 Info: POP3(joyce(a)obfusca.ted): Disconnected: > Logged out top=0/0, retr=3/163461, del=3/3, size=0 > dovecot: Nov 03 06:07:02 Info: pop3-login: Login: > user=<howard(a)obfusca.ted>, method=PLAIN, rip=::ffff:81.44.31.210, > lip=::ffff:zz.zz.zz.zz, TLS > dovecot: Nov 03 06:07:02 Info: POP3(howard(a)obfusca.ted): Disconnected: > Logged out top=0/0, retr=0/0, del=0/0, size=0 > dovecot: Nov 03 06:12:01 Error: POP3(joyce(a)obfusca.ted): mbox sync: > Expunged message reappeared in mailbox > /var/mail/vhosts/obfusca.ted/joyce (UID 1455 < 1458, seq=2, idx_msgs=0) Dovecot version: [jhg@helios ~]$ rpm -q dovecot dovecot-1.0-0.beta8.2.fc5 The MTA is postfix, and this is the first time this has ever happened. I made a copy of the mbox file, and find that it's over a megabyte long. Checking the postfix maillog I find that only three messages arrived for that user in the hour preceding the start of this behavior (all SPAM). No other users are affected, and I can't see anything obviously wrong in the mbox file. Could a bad message cause this?

2 2

[Dovecot] Server-side mail archiving - possible dovecot lda feature?
by Charles Marcus 03 Nov '06

03 Nov '06

Hi Timo, I have a question on the feasibility of adding the capability directly in dovecot LDA (or maybe this wouldn't be the correct place?) to provide a server-side mail archiving feature. What I'd like is a simple way to define a maildir, ie: vmail/archive/$user/Inbox and vmail/archive/$user/Inbox.Sent And then have the dovecot LDA deliver a copy of all mail (incoming and outgoing) to this archive folder. Is the dovecot LDA the best place for this to go? Or would an entirely new plug-in be more appropriate? My boss may be willing to pay to have this capability added. I have investigated other third party solutions, but I would prefer something that is tightly integrated with dovecot. I look forward to your response... -- Best regards, Charles

5 9

[Dovecot] Authentication in outlook
by Paul Aguirre 03 Nov '06

03 Nov '06

Hi all, I have instaled dovecot 1.0.rc10, and my configuration works fine if I get the mail with Evolution mail client, bu if I try to use outlook to get mails the authentication fail and I can't pass through the logon window. The maillog appear this message: dovecot: pop3-login: Disconnected: rip=192.168.0.22, lip=192.168.0.1 My dovecot configuration is: protocols = pop3 ssl_disable = yes mail_extra_groups = mail protocol imap { } protocol pop3 { pop3_uidl_format = %v.%u } protocol lda { postmaster_address = postmaster(a)example.com } auth_username_translation = "@." auth default { mechanisms = plain passdb pam { } userdb passwd { } user = root } dict { } plugin { } any idea to solve. thanks Paul

6 7

Re: [Dovecot] installation problem
by jaysen＠emtjaysen.net 03 Nov '06

03 Nov '06

2 1

[Dovecot] Last connection date/time
by Luigi Rosa 03 Nov '06

03 Nov '06

Hi, in an installation of Dovecot I need to know when each user made his/her last POP3 connection in a maildir environment. The date of which of the index files maintained by Dovecot can I use to get this information? Thanks. Ciao, luigi -- / +--[Luigi Rosa]-- \ Left-Handers have rights too.

2 1

[Dovecot] any idea why the mail downloading is slow?
by LeVA 03 Nov '06

03 Nov '06

Hi! I'm using rc10, but had this problem with previous releases too. Not sure if this is a dovecot problem, but I can not think of anything else. The mail downloading with pop3 is ~very slow, approx. 20 Kbyte / sec. no matter how many mails I've got in my mailbox, or how big are the mails. My ISP provides me a dedicated 100mbit line, and everything else works as fast as expected eg. http, ftp, scp... The OS is OpenBSD 3.9-stable and the system is not under heavy load at all. I've tried to turn off TLS but there was no change. Is the pop3 protocol this slow by design or there is something wrong with my setup? Thanks! Daniel -- LeVA

2 4

[Dovecot] installation problem
by jaysen＠emtjaysen.net 03 Nov '06

03 Nov '06

2 1

[Dovecot] CRAM-MD5 auth broken with postgresql passdb?
by Chris Laif 03 Nov '06

03 Nov '06

I'm currently experiencing a problem which has already been described by Jonathan in http://www.dovecot.org/list/dovecot/2006-August/015501.html If I use CRAM-MD5 auth with passwd-file as a backend (Thunderbird client) everything works fine (MD5-hashes have been shortened for readability): dovecot: auth(default): password(bob(a)foo.bar,10.0.0.123): Credentials: f12c884ba3cc82.. dovecot: imap-login: Login: user=<bob(a)foo.bar>, method=CRAM-MD5, rip=10.0.0.123, lip=10.0.0.234 My passwd file contains a line like this: bob@foo.bar:{HMAC-MD5}f12c884ba3cc82.. If I change to postgresql-based passdb, PLAIN auth works (!) and CRAM-MD5 does not work: dovecot: auth(default): sql(bob(a)foo.bar,10.0.0.123): query: SELECT 'bob(a)foo.bar' AS user, '{HMAC-MD5}f12c884ba3cc82..' AS password dovecot: auth(default): password(bob(a)foo.bar,10.0.0.123): Credentials: dovecot: auth(default): cram-md5(bob(a)foo.bar,10.0.0.123): password mismatch Please note the ultra-simple SELECT-statement (I've tried other combinations as well - no success). sql.conf setting is "default_pass_scheme = HMAC-MD5". Dovecot version 1.0.rc10. In the postgresql-based example the "Credentials:" variable is empty. I wonder if this is a bug in dovecot. Please let me know if you need any further information to resolve this issue. Thanks, Chris (As a side not I still do not understand how CRAM-MD5 auth is able to work without a plain text password, but that's another story. If it works with an HMAC-MD5 hash in a passwd-file backend it should work with the postgresql-db backend as well.)

2 3

[Dovecot] quota question
by Jakob Curdes 03 Nov '06

03 Nov '06

.. maybe a silly one, but how does the user get notified when he is over quota? Did not find anything in the docs. Is there a general IMAP way to do this or what else ? Yours JC

4 4

[Dovecot] Check plugin loading for LDA and dovecot-sieve
by Will Prater 03 Nov '06

03 Nov '06

Hello, I found this thread: http://www.dovecot.org/list/dovecot/2006- September/015955.html and have successfully compiled and installed cmusieve plugin. How does one test to make sure its being loaded? It's not parsing my sieve files in the users homes and I'd like to first check if the plugin is being loaded, since I am getting no errors about it. Thanks

2 3

[Dovecot] Postfix + Dovecot LDA Problem
by Steven F Siirila 03 Nov '06

03 Nov '06

I am having a problem setting up a server to handle e-mail in a way in which it had always done traditionally, but with Postfix+Dovecot LDA. Here's a rundown... Solaris 9 Postfix 2.3.3 Dovecot 1.0.rc10 Postfix non-defaults (postconf -n): alias_maps = dbm:/etc/mail/aliases command_directory = /opt/postfix/sbin config_directory = /etc/opt/postfix daemon_directory = /opt/postfix/libexec debug_peer_level = 2 html_directory = no inet_interfaces = $myhostname mail_owner = postfix mailbox_command = /opt/dovecot/libexec/dovecot/deliver -f "$SENDER" mailq_path = /opt/postfix/bin/mailq manpage_directory = /opt/postfix/man masquerade_domains = tc.umn.edu masquerade_exceptions = root mydestination = $myhostname mynetworks = 127.0.0.0/8, ... (omitted) myorigin = $mydomain newaliases_path = /opt/postfix/bin/newaliases queue_directory = /var/spool/postfix readme_directory = no relayhost = [omitted.tc.umn.edu] sample_directory = /etc/opt/postfix sendmail_path = /opt/postfix/sbin/sendmail setgid_group = postdrop smtpd_client_restrictions = permit_mynetworks, reject unknown_local_recipient_reject_code = 550 This works just like our old MTA, with one exception: sending e-mail to addresses within our domain (@tc.umn.edu) requires us to specify the @tc.umn.edu -- otherwise it is rejected with a message like alias(a)host.tc.umn.edu does not exist. I want such messages to be relayed to the relayhost. When I set mydestination to null, and luser_relay = $user@$domain the message goes into a black hole (I never get the message, nor do I get an NDN.) I am posting this to both the Dovecot and Postfix lists since I'm not sure where the fault lies, configuration- or software-wise. Thanks in advance for any helpful tips. -- Steven F. Siirila Office: Lind Hall, Room 130B Internet Services E-mail: sfs(a)umn.edu Office of Information Technology Voice: (612) 626-0244 University of Minnesota Fax: (612) 626-7593

1 0

[Dovecot] errors on copying messages to sent-mail
by Herr Nagengast 03 Nov '06

03 Nov '06

Howdy, In rc10 I'm still experiencing the occasional error copying mail to my sent messages folder. This is on Thunderbird 1.5.0.7 on a Mac. My configure command: ./configure --without-shadow --localstatedir=/var -with-cyrus-sasl2 --without-gssapi --without-vpopmail --prefix=/usr/local --build=i386-portbld-freebsd5.3 FYI, Todd

2 2

[Dovecot] compiling dovecot-sieve
by Fintec 02 Nov '06

02 Nov '06

Our server is an CentOS4.4 box and we use the atrpms built RPMs for installing dovecot. I am wanting to use the sieve plug-in so I've followed the dovecot wiki instructions, downloaded the files from CVS, but I'm not sure what configure options to use. When I try without any options I get: dovecot-config not found from /usr/src/dovecot-sieve, use --with-dovecot=PATH to give path to compiled Dovecot sources I tried using "./configure --with-dovecot=/usr/libexec/dovecot" but get the same problem. Any help would be greatly appreciated. Gavin -- ATRPMS RPM file listing -- /etc/dovecot.conf /etc/pam.d/dovecot /etc/pki/dovecot/dovecot-openssl.cnf /etc/rc.d/init.d/dovecot /usr/lib64/dovecot/imap /usr/lib64/dovecot/imap/lib01_acl_plugin.so /usr/lib64/dovecot/imap/lib01_convert_plugin.so /usr/lib64/dovecot/imap/lib01_quota_plugin.so /usr/lib64/dovecot/imap/lib01_zlib_plugin.a /usr/lib64/dovecot/imap/lib01_zlib_plugin.la /usr/lib64/dovecot/imap/lib01_zlib_plugin.so /usr/lib64/dovecot/imap/lib02_imap_quota_plugin.a /usr/lib64/dovecot/imap/lib02_imap_quota_plugin.la /usr/lib64/dovecot/imap/lib02_imap_quota_plugin.so /usr/lib64/dovecot/imap/lib02_trash_plugin.so /usr/lib64/dovecot/lda /usr/lib64/dovecot/lda/lib01_acl_plugin.so /usr/lib64/dovecot/lda/lib01_convert_plugin.so /usr/lib64/dovecot/lda/lib01_quota_plugin.so /usr/lib64/dovecot/lda/lib02_trash_plugin.so /usr/lib64/dovecot/lib01_acl_plugin.a /usr/lib64/dovecot/lib01_acl_plugin.la /usr/lib64/dovecot/lib01_acl_plugin.so /usr/lib64/dovecot/lib01_convert_plugin.a /usr/lib64/dovecot/lib01_convert_plugin.la /usr/lib64/dovecot/lib01_convert_plugin.so /usr/lib64/dovecot/lib01_quota_plugin.a /usr/lib64/dovecot/lib01_quota_plugin.la /usr/lib64/dovecot/lib01_quota_plugin.so /usr/lib64/dovecot/lib02_trash_plugin.a /usr/lib64/dovecot/lib02_trash_plugin.la /usr/lib64/dovecot/lib02_trash_plugin.so /usr/lib64/dovecot/pop3 /usr/lib64/dovecot/pop3/lib01_convert_plugin.so /usr/lib64/dovecot/pop3/lib01_quota_plugin.so /usr/libexec/dovecot /usr/libexec/dovecot/checkpassword-reply /usr/libexec/dovecot/deliver /usr/libexec/dovecot/dict /usr/libexec/dovecot/dovecot-auth /usr/libexec/dovecot/gdbhelper /usr/libexec/dovecot/imap /usr/libexec/dovecot/imap-login /usr/libexec/dovecot/pop3 /usr/libexec/dovecot/pop3-login /usr/libexec/dovecot/rawlog /usr/libexec/dovecot/ssl-build-param /usr/sbin/dovecot /usr/sbin/dovecotpw /usr/share/doc/dovecot-1.0 /usr/share/doc/dovecot-1.0/REDHAT-FAQ.txt /usr/share/doc/dovecot-1.0/USE-WIKI-INSTEAD /usr/share/doc/dovecot-1.0/UW-to-Dovecot-Migration /usr/share/doc/dovecot-1.0/UW-to-Dovecot-Migration/maildir-migration.txt /usr/share/doc/dovecot-1.0/UW-to-Dovecot-Migration/migrate-folders /usr/share/doc/dovecot-1.0/UW-to-Dovecot-Migration/migrate-users /usr/share/doc/dovecot-1.0/UW-to-Dovecot-Migration/perfect_maildir.pl /usr/share/doc/dovecot-1.0/auth-protocol.txt /usr/share/doc/dovecot-1.0/auth.txt /usr/share/doc/dovecot-1.0/configuration.txt /usr/share/doc/dovecot-1.0/design.txt /usr/share/doc/dovecot-1.0/examples /usr/share/doc/dovecot-1.0/examples/dovecot-ldap.conf /usr/share/doc/dovecot-1.0/examples/dovecot-sql.conf /usr/share/doc/dovecot-1.0/examples/mkcert.sh /usr/share/doc/dovecot-1.0/index.txt /usr/share/doc/dovecot-1.0/mail-storages.txt /usr/share/doc/dovecot-1.0/multiaccess.txt /usr/share/doc/dovecot-1.0/nfs.txt /usr/share/doc/dovecot-1.0/securecoding.txt /usr/share/doc/dovecot-1.0/variables.txt /var/cache/dovecot /var/cache/dovecot/indexes /var/run/dovecot /var/run/dovecot/login

3 15

[Dovecot] making dovecot and exim write to one log
by Zbigniew Szalbot 02 Nov '06

02 Nov '06

Hello, I am looking for some advice. I am trying to force dovecot to run to the same log as exim does. In dovecot.conf I put the exim log path /var/log/exim/mainlog. I restarted dovecot and the process worked fine. However at midnight exim log file is rotated and since then dovecot stops logging to this log. In syslog.conf I put: mail.* /var/log/exim/mainlog And in newsyslog.conf I have: /var/log/exim/mainlog mailnull:mail 640 60 * @T00 Z I used to have an N flag next to Z but after reading the man I realized that its job is not to inform other processes about log creation. My qeustion is how do I set up things that dovecot and exim happily write to one log without having to restart dovecot at midnight? I am fairly new to FreeBSD which I use so I beg your patience with me. Thanks! -- Zbigniew Szalbot

2 1

Re: [Dovecot] deliver + quota failure
by Mark Ruijs 02 Nov '06

02 Nov '06

I investigated the deliver with quota's bug a little more (rc10, mysql, virtual domains, maildir). My log files reads: deliver(test(a)ruijs.cc): Info: msgid=<000f01c6fac1$bd4e8670$8801a8c0@Moskou>: save failed to INBOX deliver(test(a)ruijs.cc): Info: sieve runtime error: Keep: Generic Error deliver(test(a)ruijs.cc): Info: msgid=<000f01c6fac1$bd4e8670$8801a8c0@Moskou>: save failed to INBOX deliver(test(a)ruijs.cc): Error: open(ruijs.cc/test//.temp.in2sports2.vianetworks.nl.13210.72d247ac698d0019) failed: No such file or directory deliver(mark(a)ruijs.cc): Info: msgid=<dovecot-1162066721-407295-0(a)in2sports2.vianetworks.nl>: saved mail to Junk Dovecot tries to deliver, but notices quota exceeded. I don't think Sieve is playing a role here - I added Sieve before I encountered the problem. Two problems: 1) The .dovecot.lda-dupes can't be written (that's what the open...failed notice is about). 2) The Quota Exceed mail seem to contain mal-formed headers (that's why it the notice-mail ends in my junk-folder). Digging into deliver.c, I noticed that auth_client_put_user_env() changes the HOME environment from /var/mail (which is ok), to ruijs.cc/test/ (which is the maildir, relative to /var/mail). And then fopen fails (see the trace below). So I think that the code auth_socket = getenv("AUTH_SOCKET_PATH"); if (auth_socket == NULL) auth_socket = DEFAULT_AUTH_SOCKET_PATH; ret = auth_client_put_user_env(ioloop, auth_socket, destination, process_euid); if (ret != 0) return ret; home = getenv("HOME"); if (home != NULL) { /* If possible chdir to home directory so core file could be written. If it fails, don't worry. */ (void)chdir(home); is the key. Should the chdir be done *before* the call to auth_client_put_user_env()? I'm not familiar with the internal workings of the Dovecot LDA, so I won't suggest a proper fix. Who will. As for the mal-formed headers, I'll take a look at it later. Mark #0 i_error (format=0x80ac5f7 "open(%s) failed: %m") at failures.c:203 #1 0x0809f900 in dotlock_create (path=0x9ece2c0 "ruijs.cc/test//.dovecot.lda-dupes", dotlock=0x9edfc48, flags=Variable "flags" is not available. ) at file-dotlock.c:265 #2 0x0809fb71 in file_dotlock_open (set=0x80b9c90, path=0x9ece2c0 "ruijs.cc/test//.dovecot.lda-dupes", flags=0, dotlock_r=0x9ee7920) at file-dotlock.c:614 #3 0x08056ec5 in duplicate_new (path=0x9ece2c0 "ruijs.cc/test//.dovecot.lda-dupes") at duplicate.c:157 #4 0x080571c6 in duplicate_mark (id=0x9ece270, id_size=55, user=0xbf9edb45 "test(a)ruijs.cc", time=1162163205) at duplicate.c:195 #5 0x080573c9 in mail_send_rejection (mail=0x9ede7e0, recipient=0xbf9edb45 "test(a)ruijs.cc", reason=0x9edc218 "Quota exceeded") at mail-send.c:51 #6 0x08056c51 in main (argc=5, argv=0xbf9ec5d4) at deliver.c:595

3 4

[Dovecot] INBOX un-subscribable (is that a word?)
by Jim Horner 02 Nov '06

02 Nov '06

I am trying to get open-xchange installed and working (which after two days might be futile). In doing this I noticed that no email client can subscribe to INBOX. I'm using rc10 and my namespaces are the following. 99% of the email clients ignore the inability to subscribe to INBOX and display all the folders underneath anyway which is why I've never noticed this issue... however, open-xchange is not in that camp and only displays messages in INBOX. All folders are in the subscriptions file including INBOX but all email clients always list INBOX as not subscribed to. COMPANY are ROOTMAIL are share folders with ACLs in /etc/dovecot/acl and those top folders are not subscribable either. namespace public { separator = . prefix = COMPANY. location = maildir:/home/services/mail/arinbe.com/arinbe/Maildir:CONTROL=%h/shared-set… hidden = no inbox = no } namespace public { separator = . prefix = ROOTMAIL. location = maildir:/home/services/mail/arinbe.com/rootmail/Maildir:CONTROL=%h/shared-s… hidden = no inbox = no } # default namespace namespace private { separator = . inbox = yes hidden = no prefix = INBOX. }

2 1

[Dovecot] FC4 and Dovecot 1.0 not displaying all migrated mailboxes
by Lovell Mcilwain 02 Nov '06

02 Nov '06

Hello all, I recently switched to dovecot on my FC4 server from UW-IMAP on my Mac OS X 10.3 machine and I was able to get my inbox and my trash box to be seen without any issues but all of my other mailboxes don't seem to show up. My mail directory is ~/mail and that is where I placed all of my mailboxes that I moved from my mac, but when I log into my new server using SSL/IMAP, only my trash and my inbox show up. My other mailboxes don't show up at all. Can anyone tell me how I can get my other mailboxes to show? As far as I know these mailboxes are standard unix mailbox files. Thanks

2 1

[Dovecot] another suggestion
by Hans Morten Kind 02 Nov '06

02 Nov '06

On our solaris systems we quite often sees dovecot coredump on exit when trying to free a null buffer. After including if (array->buffer == NULL) return; in array_free() in array.h these coredums have been avoided. hmk

2 1

[Dovecot] BUG in RC10 deliver using mbox format
by Steven F Siirila 02 Nov '06

02 Nov '06

After recently adding the -f parameter to the call to the deliver command which is called by Postfix, I found that e-mail with a null return path (MAIL FROM:<>) was causing Dovecot deliver to SEGFAULT. I verified this by making this patch to deliver.c (notice I fixed a typo here, too): *** deliver.c.orig Fri Oct 13 07:32:28 2006 --- deliver.c Fri Oct 27 21:26:08 2006 *************** *** 446,454 **** i++; if (i == argc) { i_fatal_status(EX_USAGE, ! "Missing envleope argument"); } ! envelope_sender = argv[i]; } else { print_help(); i_fatal_status(EX_USAGE, --- 446,455 ---- i++; if (i == argc) { i_fatal_status(EX_USAGE, ! "Missing envelope argument"); } ! if (*argv[i]) ! envelope_sender = argv[i]; } else { print_help(); i_fatal_status(EX_USAGE, While this fixed my SEGFAULT, it still leaves the "From_" line with the default "dovecot.deliver" as the return path, something I don't want. It should be "MAILER-DAEMON" or some-such just like all the other LDAs in the case of a NULL return path. Perhaps there needs to be a new parameter so one can specify what a NULL return path should be converted to when it is encountered... Also, note that the "Usage" message in deliver.c does not include the relatively new -f option either, so that should have been part of my above patch as well. -- Steven F. Siirila Office: Lind Hall, Room 130B Internet Services E-mail: sfs(a)umn.edu Office of Information Technology Voice: (612) 626-0244 University of Minnesota Fax: (612) 626-7593

3 2

[Dovecot] quota with sendmail and dovecot
by Antonio Casado Rodríguez 02 Nov '06

02 Nov '06

I have a problem with dovecot and quotas I don't want quota in INBOX with sendmail (mbox), it's work ok. Sendmail can put the new messages in INBOX although exceed the quota limit. I have two namespace in dovecot: namespace private { separator = / inbox = yes prefix = "#mbox/" location = mbox:/Public/Maildir/%n_mbox_indexes:INBOX=/var/mail/%n } namespace private { separator = / prefix = "" location = maildir:/Public/Maildir/%n } I have this quota: plugin { quota = maildir:storage=10240 } It's work ok, i have 10 MB in INBOX and i have 10 MB in maildir. My clients are Mozilla Thunderbird My problem: when Sendmail put one new message in INBOX, Thunderbird see it, but the quota don't change. I think that when dovecot do a full sync it must update the quota.

2 1

[Dovecot] mbox_sync_read_and_move failure
by Timothy Daly 02 Nov '06

02 Nov '06

Hi, I recently switched to using dovecot for my IMAP server. I'm running dovecot 1.0rc10 on redhat linux 7.3. The filesystem is ext2, not NFS. I'm using mbox for mail storage. It worked okay for a day or two, but now when I try to check my mail I get an error from evolution, my imap client, saying that the server unexpectedly disconnected. In the server logs I see: Nov 2 13:10:49 tenkan dovecot: imap-login: Login: user=<tim>, method=PLAIN, rip=192.132.92.15, lip=216.114.78.229, TLS Nov 2 13:10:58 tenkan dovecot: IMAP(tim): file mbox-sync-rewrite.c: line 405 (mbox_sync_read_and_move): assertion failed: (need_space == (uoff_t)-mails[idx].space) Nov 2 13:10:58 tenkan dovecot: child 30315 (imap) killed with signal 6 I see that this came up on this list a little while ago, but it doesn't sound like it got resolved. For the moment, I'm unable to read my mail via IMAP. :/ Any ideas? Cheers, Tim ____________________________________________________________________________________ Access over 1 million songs - Yahoo! Music Unlimited (http://music.yahoo.com/unlimited)

1 1

[Dovecot] Dovecot-auth stand alone
by Jorgen Lundman 02 Nov '06

02 Nov '06

Since you have to have a SASL implementation with Postfix, either Cyrus or Dovecot, would it be feasable to have autoconf options to build only those parts required? Currently I attempt to disable most things, except for LDAP which we want to use: ./configure --with-ldap --without-pop3d --without-passwd --without-passwd-file --without-shadow --without-pam --without-checkpassword --without-bsdauth --without-vpopmail --without-ssl --without-deliver --without-sql-drivers --with-storages= That still compiles, and installs, imap. No way to stop that. However, master process "dovecot" does not want to start with "protocols=" set to empty. This is somewhat understandable, but I really do not want any listening ports, just the Unix auth socket and dovecot-auth process. Bind localhost for now? I take it I should run dovecot-auth as stand-alone, setting the AUTH_1 environment variable as well as a few others. Lund -- Jorgen Lundman | <lundman(a)lundman.net> Unix Administrator | +81 (0)3 -5456-2687 ext 1017 (work) Shibuya-ku, Tokyo | +81 (0)90-5578-8500 (cell) Japan | +81 (0)3 -3375-1767 (home)

3 5

[Dovecot] 1.0.rc10 status report
by David Lee 02 Nov '06

02 Nov '06

(Background: Relatively new to dovecot; looking to do transparent replacement of long-established UW-IMAP on cluster of Linux boxes which NFS-mount a shared "/var/spool/mail".) With rc8, where I had already increased "login_max_processes_count" from default 128 to 1024, we had still hit the issue of too many logins crashing dovecot, so that trial had only lasted a couple of hours. With rc10, I doubled this to try to avoid the problem (I didn't want to risk testing the new code that addressed the problem... sorry!). We ran for almost a full working day. Good! Because of a few issues (below) I then backed off. 1. "User unknown": We use NIS for our passwd information. On the earlier rc8 test we had had several occurences of "User unknown" (from "deliver") giving "dsn=5..." for perfectly valid users. So for this rc10 test I applied a local patch so these were reduced to "EX_TEMPFAIL" (dsn=4...). (This was triggered, as epected, a few times and subsequent delivery attemtps succeeded.) I strongly suspect that this is some sort of issue with FC5, probably "nscd" and nothing to do with dovecot. Hints would be nice, but from the dovecot perspective you may probably ignore this item. 2. For one particular user, the "deliver" consistently gave: Failed to create storage for '...' with mail 'mbox:/HOME_DIRECTORY_USED_BUT_NOT_GIVEN_BY_USERDB:INBOX=... I think this is ultimately due to something strange in the user ".forward" file. I'd be delighted to follow this up with anyone else who might have seen it. Although in one sense we may be drifting off-topic, in another sense I suspect that there is scope for adjusting "deliver" to handle this more gracefully. 3. There were several occurences of: IMAP(...): file ../../../../../src/lib-storage/index/mbox/mbox-sync-rewrite.c: line 405 (mbox_sync_read_and_move): assertion failed: (need_space == (uoff_t)-mails[idx].space) child 30842 (imap) killed with signal 6 This looks particularly awkward. Any thoughts? 4. There were two occurences of: IMAP(...): file ../../../src/lib-index/mail-index.c: line 1801 (mail_index_move_to_memory): assertion failed: (index->fd == -1) child 20493 (imap) killed with signal 6 Again, this looks particularly awkward. Any thoughts? For these last two items, note that the indexes are currently NFS-shared alongside the INBOX area. I'm still not clear on how to regard the concept of indexes, as applied to a small cluster of machines, and handling simultaneous updates to INBOXes (analogous to the vital importance of INBOX locking for such updates). If one imagines the IMAP daemon (and pop and deliver) as file-clients of the (NFS-shared) INBOXes on a fileserver, do the indexes belong very close to the INBOXes (fileserver) or the dovecot software (file client)? So should I have the indexes on the fileserver (one instance), or should they be on each cluster machine's private storage (possibly several instances; one per cluster machine)? I've got them on the server; would they be better on the cluster clients? (Might that be the cause and fix of these two problems?) -- : David Lee I.T. Service : : Senior Systems Programmer Computer Centre : : Durham University : : http://www.dur.ac.uk/t.d.lee/ South Road : : Durham DH1 3LE : : Phone: +44 191 334 2752 U.K. :

3 2

[Dovecot] deliver + quota failure
by Mark Ruijs 02 Nov '06

02 Nov '06

I use Dovecot's deliver as the LDA for Postfix in a virtual user setting. My maillog reads: Oct 22 00:17:51 mail dovecot: auth(default): master in: USER 1 mark.ruys(a)in2sports.net service=deliver Oct 22 00:17:51 mail dovecot: auth-worker(default): sql(mark.ruys(a)in2sports.net): SELECT maildir AS home, 5000 AS uid, 5000 AS gid, CONCAT('dirsize:storage=', round(quota/1000)) AS quota FROM mailbox WHERE username = 'mark.ruys(a)in2sports.net' AND active = 1 Oct 22 00:17:51 mail dovecot: auth(default): master out: USER 1 mark.ruys(a)in2sports.net home=in2sports.net/mark.ruys/ uid=5000 gid=5000 quota=dirsize:storage=10240 Oct 22 00:17:51 mail deliver(mark.ruys(a)in2sports.net): msgid=<00c801c6f55e$af416fb0$8801a8c0@Moskou>: save failed to INBOX Oct 22 00:17:51 mail deliver(mark.ruys(a)in2sports.net): open(in2sports.net/mark.ruys//.temp.mail.in2sports.net.12777.5c70c02bb158bd1 a) failed: No such file or directory The reason is, I'm out of quota. I expected some kind of bounce, but the message is killed by Amavis because of a bad header: Content-Type: text/plain; charset=utf-8 Content-Disposition: inline Content-Transfer-Encoding: 8bit Your message was automatically rejected by Dovecot Mail Delivery Agent. The following reason was given: Quota exceeded --12684/mail.in2sports.net Content-Type: message/disposition-notification Reporting-UA: mail.in2sports.net; Dovecot Mail Delivery Agent Final-Recipient: rfc822; mark.ruys(a)in2sports.net The problem is, there is no recipient (header is missing). Anyone a clue how to fix it? Thanks for some directions. Mark Ruys Config: - Dovecot rc 10 - postfix-2.3.3-2.mysql.sasl2.vda.fc4 dovecot.conf: protocol imap { mail_plugins = quota imap_quota } protocol lda { postmaster_address = postmaster(a)in2sports.net mail_plugins = quota auth_socket_path = /var/run/dovecot/auth-master } postfix/main.cf: dovecot_destination_recipient_limit = 1 virtual_transport = dovecot virtual_create_maildirsize = yes virtual_mailbox_limit_maps = mysql:/etc/postfix/mysql/limits.cfg virtual_mailbox_limit_override = yes virtual_overquota_bounce = yes

2 1

[Dovecot] valid_chroot_dirs question
by Luca Corti 02 Nov '06

02 Nov '06

Hello, I've got a dovecot setup using PAM and real system users. In this setup I also use pure-ftpd to give local users ftp access to their $HOMEs. To have pure-ftpd chroot into the user home i replaced /home/user with /home/user/./ in /etc/passwd. Unfortunately this breaks Dovecot this way: Oct 23 18:18:20 localhost dovecot: Invalid chroot directory '/home/foo' (user foo) (see valid_chroot_dirs in config file) and dovecot.conf says # ':' separated list of directories under which chrooting is allowed for mail # processes (ie. /var/mail will allow chrooting to /var/mail/foo/bar too). # This setting doesn't affect login_chroot or auth_chroot variables. # WARNING: Never add directories here which local users can modify, that # may lead to root exploit. Usually this should be done only if you don't # allow shell access for users. See doc/configuration.txt for more information. #valid_chroot_dirs = Now if I set valid_chroot_dirs = /home everything works, but the WARNING pretty much scares me since user foo HAS shell access. Is this safe? Is there a way to avoid this? Why I can't chroot to /home/foo/./ if I can to /home/foo ? I'm on 1.0rc10 thanks

2 1

[Dovecot] Dovecot imap bug
by Lauri Jesmin 02 Nov '06

02 Nov '06

Hello, i got such error from dovecot RC10, Oct 24 10:38:58 raud dovecot: [ID 107833 mail.info] imap-login: Login: user=<eleppik>, method=PLAIN, rip=xxx, lip=yyy Oct 24 10:39:03 raud dovecot: [ID 107833 mail.error] IMAP(eleppik): file mbox-sync-rewrite.c: line 405 (mbox_sync_read_and_move): assertion failed: (need_space == (uoff_t)-mails[idx].space) This is Solaris on x86, 32 bit executable, compiled with gcc, and there is enough room for index creation. -- Lauri Jesmin <lauri.jesmin(a)ut.ee> Tartu Ülikool

2 1

[Dovecot] Installation of Dovecot
by Steven F Siirila 02 Nov '06

02 Nov '06

When I configure Dovecot to conform to our directory hierarchy, it insists on adding 'dovecot/' to the prefixes I specify. Is there any way to inhibit this? My configure command is: ./configure --prefix=/opt/dovecot --sysconfdir=/etc/opt/dovecot \ --libexecdir=/opt/dovecot/libexec --localstatedir=/var/opt/dovecot \ --without-sql-drivers --with-ssl=openssl \ --with-ssldir=/etc/opt/dovecot My problem is with the resulting directories: /opt/dovecot/libexec/dovecot is used instead of /opt/dovecot/libexec /var/opt/dovecot/lib/dovecot is used instead of /var/opt/dovecot/lib /var/opt/dovecot/run/dovecot is used instead of /var/opt/dovecot/run It seems that Dovecot assumes that libexecdir and localstatedir refer to non-Dovecot-specific directories, and adds 'dovecot/' to the path. Is there any way to avoid this? In our environment )we use: /opt/XXX Optional software XXX /etc/opt/XXX Configuration for optional software XXX /var/opt/XXX Variable data for optional software XXX (Which makes for easier upgrades) -- Steven F. Siirila Office: Lind Hall, Room 130B Internet Services E-mail: sfs(a)umn.edu Office of Information Technology Voice: (612) 626-0244 University of Minnesota Fax: (612) 626-7593

2 1

[Dovecot] Maildir++?
by Marten Lehmann 02 Nov '06

02 Nov '06

Hello just to have up2date records: Is the current dovecot release capable of the maildirsizefile as described in http://www.exim.org/exim-html-4.63/doc/html/spec_html/ch26.html#id2643923 ? Regards Marten

2 1

[Dovecot] Fw: POP 23 problem
by Manoj Fernandez 02 Nov '06

02 Nov '06

Hi there I am using Dovecot on Ubuntu 6 LTS forPOP3 services. The user account created at installation works fine and Iam able to log to POP3 services by telnetr. When I created a another user and tried tologin via telnet this is what happens telnet XXX.XXX.XXX.XXX 10 + OK Dovecot ready user XXXX + OK pass XXX +OK logged in Connection tohost lost and session terminates. Pls advise what could be the problem Tks Manoj Sri Lanka

2 1

[Dovecot] imap process crashing with "file mail-cache-fields.c: line 26: unreached"
by JB Zimmerman 02 Nov '06

02 Nov '06

Hoping someone's seen this and/or can help...heh. I'm running the at rpm of dovecot, version dovecot-1.0-0_27.rc10.el4.at. I'm running it on RHEL4, up to date. We're using Maildir (we're upgraded from a Courier-IMAP installation) and things are working...but...we have a few users with very large mailboxes (not their inboxes) where they archive stuff (200k+ messages). When they try to read those mailboxes, the imap server instantly drops the connection, and I get the following in the log: --cut-- Oct 27 11:20:11 hostname dovecot: IMAP(user): file mail-cache-fields.c: line 26: unreached Oct 27 11:20:11 hostname dovecot: child 27514 (imap) killed with signal 6 --cut-- host and user names changed to protect the guilty. I have tried increasing the imap process size max to 512, as well as doubling the IMAP command size to 131072 (bytes)? Neither made a difference. *other* mailboxes on the same account work fine. The error happens *immediately*, not after a timeout, as soon as they select the mailbox in their client (we're using Evolution, and have tried pine as well...I'm working on trying other clients). The Maildir caching optimization settings in the conf are left to default. Any ideas? Many thanks. J.B. Zimmerman --

3 3

Re: [Dovecot] Clustering (replication and proxying) plans for the future
by Bill Boebel 02 Nov '06

02 Nov '06

On Tue, October 24, 2006 2:31 pm, Timo Sirainen <tss(a)iki.fi> said: > The replication could work simply by sending the transaction logs' > contents to the replicatio process which passes it onto other servers, > which finally sync their local mailboxes based on that data. Since > Dovecot already is able to sync mailboxes based on the transaction log's > contents this should be pretty easy to implement. > > Of course the new mails' contents also have to be sent. This could be > prioritized lower than the transaction traffic, so that each server > always has very up-to-date view of the mailbox metadata, but not > necessarily the contents of all the mails. > > If the server finds itself in a situation that it doesn't have some > specific mail, it'll send a request to the replication process to fetch > it ASAP from another server. The reply will then take the highest > priority in the queue. Is your primary goal with this replication to add redundancy or to distribute load such as for shared mailboxes? I've thought about the redundancy side of this a lot, but not so much about load distribution. It sounds like you're going for load distribution, but... If the goal is redundancy, I'd suggest that mailbox state is less important than the mail data. Index files can be recreated from the data, and would not even be needed on the secondary server(s) unless the primary fails. So I'd put a higher priority on getting the mail content to the secondary servers. If the goal is to distribute load for shared mailboxes, then your prioritization makes sense. Also, if the goal is redundancy, this design can be simplified a lot by having one master and one or more slaves. All modify operations would go to the master, so that you do not need global locks. Different sets of users would belong to different namespaces, so that you can have multiple replication paths in your cluster. You'd also want an API for the replication process so that third-party applications that modify mailboxes can log those changes so that they are replicated. And in that case, the replication process could be made generic enough so that it can be used to replicate any set of files, with or without Dovecot. Bill

1 0