- dovecot - dovecot.org

[Dovecot]
by Jesse Peterson 08 Oct '03

08 Oct '03

% uname -a Darwin xxx 6.6 Darwin Kernel Version 6.6: Sun Jul 6 05:12:51 PDT 2003; root:tmp/xnu-6.6.2-4-root.obj/RELEASE_PPC Power Macintosh powerpc Attached is a gzipped "sh autogen.sh >& autogen.log" for the above machine. What do you think? Jesse Peterson <jesse(a)mactechs.com> Office 206.441.7443 / Fax 206.441.8078 MacTechs / Macintosh System and Network Support 2121 First Avenue, Suite 103 / Seattle, Washington 98121 http://www.mactechs.com/

1 0

[Dovecot] those assertions
by dovecot＠spam.turbolink.net 06 Oct '03

06 Oct '03

Timo, Just FYI while you're working on the mbox code, I discovered a bug that occasionally causes dovecot to insert a single blank line at the beginning of the mbox, I'm not sure when/how/why. A single blank line seems to really confuse dovecot, and causes the server to crash when somebody connects to an afflicted mbox. ("Error indexing mbox" in the log, and disconects the user right away). I fixed it with lots of ugly code at our site (basically just remember that we skipped an intial blank line when doing other operations, instead of skipping it then forgetting later). I suspect there's a more elegant way to do it. - Mike

1 0

[Dovecot] SSL Client Certificate Support
by Bert Koelewijn 06 Oct '03

06 Oct '03

Dear Timo, most modern enterprises make use of a Public Key Infrastructure. It would be nice to have dovecot check a client certificate instead of a password. This makes life much easier and more secure. Mail clients like Mozilla and MS Outlook do support this. What do you think of the following feature request: - Client authenticates with a certificate via SSL. (Like stunnel can) - Dovecot looks the username up in a table with (public key, username) - The mailclient gives a name and password, but dovecot ignores them - Dovecot gives the client access by the username found in the table This way existing mail clients can use this system and you can save your username with an empty password. Best Regards, Bert Koelewijn

5 10

[Dovecot] those assertions
by Bernard Blackham 05 Oct '03

05 Oct '03

Hi, I did a bit of digging into the assertions from mbox-rewrite.c (hdr_parsed_size.physical_size == hdr_size). Every time it happens, hdr_size is 0, while hdr_parsed_size.physical_size is non-zero (presumably the correct value). Does this help track it down? I can't manage to get hold of an mbox that causes this though. Another infrequent assertion that's popped up: file message-address.c: line 262 (message_address_write): assertion failed: (addr->domain != NULL) And one that's only ever been spotted once in the last few weeks: file imap-bodystructure.c: line 278 (part_parse_headers): assertion failed: (part->physical_pos >= input->v_offset - start_offset) I'm waiting for them to happen again to provide some more info... Regards, Bernard. -- Bernard Blackham bernard at blackham dot com dot au

2 1

[Dovecot] another Dovecot problem
by Tim Miller 05 Oct '03

05 Oct '03

Hi All-- First, thanks to Timo for solving my last issue. I got dovecot up and running on one of my machines, and it does exactly what I want. Now I'm trying to install dovecot on an older box (glibc 2.0.7 Linux kernel 2.0.36), and encountering some problems: -- firstly autoconf/automake does not seem to correctly deal with the madvise function on this system. It detects that we don't have madvise, yet it's prototyped in /usr/include/sys/mman.h. This causes the compilation to fail when dovecot tries to redefine this function. -- I attempted to solve this problem by renaming the function dovecot prototypes to dc_madvise and then changed all the calls in the code (and the implementation) from madvise to dc_madvise. This allows the code to compile correctly. -- However, once the server is installed, it does not appear to work correctly. I can login, but when I try to list my folders or select any folder (one that exists or one that doesn't exist) the connection times out and the following entry is written to the log file: dovecot: Oct 03 05:38:56 Error: login: received another "not listening" notification (if you can't login at all, see src/lib/fdpass.c) I tracked this message down in the source, but didn't see any obvious way to trace back the problem. Does anyone have experience building on this older configuration (the glibc is a Red Hat version, if it makes any difference)? Any ideas on what might be causing this issue? Best, Tim Miller

2 5

mbox/maildir/directories [was: Re: [Dovecot] still getting weird .{inbox} folder creations with latest -test7]
by Miquel van Smoorenburg 05 Oct '03

05 Oct '03

This is a bit of a late reply, but still: On Thu, 2003-09-04 at 15:06, Timo Sirainen wrote: > CVS has been optimized to assume all files beginning with a dot (except > .subscriptions currently) are mailboxes. This is faster since it doesn't > have to stat() each file to figure out if it's a directory or not. > Perhaps that should be optional. New Linux systems (maybe others too) > wouldn't actually even need the stat().. > > I'll probably some day also add support for dotless directory-structured > mailbox locations, but it's not really high priority. Well, on our systems the mailbox is in /var/mail in maildir format, and in ~/Mail users have split up their folders in subdirs, in mixed maildir and mbox formats. So if dovecot could support both dotless directory-structured mailbox locations and maildir/mbox mix-n-match in the same tree, that would be excellent for us. Mbox is a better format for archiving. Now if Dovecot could also access (read-only ofcourse) compressed mbox archives ... Food for thought. Just put it on the wishlist ;) Mike.

2 1

[Dovecot] Patches
by Jaldhar H. Vyas 05 Oct '03

05 Oct '03

As the freeze for Debian sarge slowly approaches I want to make sure the Dovecot packages are in as good condition as possible. I see there have been a number of patches since 0.99.10. I have added the following patches: * segfault when user home directory is empty * Proper PAM service name * Make suid work on 2.6 kernels Any other patches thatI ought to add. Or better yet, will there be a 0.99.11 soon? -- Jaldhar H. Vyas <jaldhar(a)debian.org> La Salle Debain - http://www.braincells.com/debian/

5 4

[Dovecot] Why does dovecot confuse mutt?
by Amelia A Lewis 04 Oct '03

04 Oct '03

Heylas, I just switched my primary mail server from courier imap to dovecot (I've been waiting to do this; dovecot showed up in debian testing for alpha, at last). So, using the same set of maildirs, there are slightly different behaviors. First, of course, dovecot displays the hierarchy as I thought it ought to be, such that INBOX is a sibling of all other top-level boxes, not the parent of everything. This is A Good Thing[tm]. That works as expected. However, as far as mutt is concerned, *every* mailbox has child folders. My muttrc contains the line: set folder=imap://localhost/. (and the home folder is set to imap://localhost/INBOX; the idea is to do all mail munging through the server, never directly touching the maildirs with an MUA). Oh, and I'm using maildir (~/Maildir). In mutt, from the currently-selected mailbox, one can use 'c' to change boxes, and ? displays a navigable folder hierarchy. If a folder contains only mail (no child folders), it shows up as "FolderName", if it has child folders (whether or not it has mail), it shows up as "FolderName.". You can display the mail in a folder that has child folders, but it requires a different keystroke than the default (enter selects a folder, which means showing child folders if there are any, showing mail if there aren't; to display mail in a folder that has child folders, space). This is tripping me up a little, because of course the commands are mostly bred into my fingertips, and it's a difficult adjustment. I hit return, and I see a folder that contains the "child" folder "../". Is this a glitch in mutt's handling of information that I ought to report to mutt maintainers? Is it a glitch in dovecot's presentation of information that I ought to report to ... err, well. *laugh* My other primary mail client seems to cope beautifully with the information that's supplied (sylpheed, if it matters). But then, sylpheed also coped perfectly when courier was supplying information. I gather that courier and dovecot are reporting something slightly different, somehow, but I don't really know what, and I don't know which should be considered "correct". Amy!

5 5

[Dovecot] mailbox sorting issue
by Paul 04 Oct '03

04 Oct '03

Thanks for the "junk at end" help. Now I'm having one more perplexing issue: When I sort a Dovecot mbox in Pine, the most recent messages tend to linger near the bottom of the message list, regardless of how they're sorted. Here's a snippet of the bottom of the list, sorted by arrival time: 448 2003-09-24 20:31 sprightly@e... Re: *hoopoe 449 2003-09-24 21:05 mlescaut@w... Re: yes! 450 2003-09-24 23:57 jackulysses@y... Re: oh my lord 451 2003-09-25 01:43 sprightly@e... attachments==take a look 452 2003-09-25 01:29 avantguild@m... Your Membership is Almost Up 453 2003-09-25 10:40 heidi@p... xhtml 454 2003-09-25 11:04 dembo@s. Re: bridge 455 2003-09-25 11:54 JKesner@m... Bombay 456 2003-09-25 12:05 cm2144@c... Re: bridge at linda's And here is a snippet of the same mbox list, sorted by From address: 449 2003-09-25 01:43 sprightly@e... attachments==take a look 450 2003-09-10 16:06 staff@c... Tribute in Light Shines 451 2003-09-08 18:44 starpiekat@y... Re: Sorry! 452 2003-09-23 22:01 starry@p... but... 453 2003-09-25 12:05 cm2144@c... Re: bridge at linda's 454 2003-09-17 17:07 wahrman@s... RE: bridge etc. 455 2003-09-19 13:11 wahrman@s... RE: bridge etc. 456 2003-09-15 23:39 waycross@u... waycross - the eagle Notice that message from cm2144 in both lists, way out of order in the second! I'm not 100% sure that this is a Dovecot issue, but I suspect it is, since this doesn't happen if I open the same mailbox locally or with UW-IMAP. I know that Pine makes use of IMAP server-based sorting if it is available. I tried deleting .imap-index* files, just in case, but that didn't help. thanks, Paul

3 2

Re: [Dovecot] PATCH: mysql authentication
by Matthew Reimer 03 Oct '03

03 Oct '03

> On Fri, 2003-10-03 at 19:54, Matthew Reimer wrote: > >Here's another patch. This one isn't much different from the last patch, >except it tries a little harder to make sure that the required fields >are returned by the query (like the pgsql module does). BTW, the patch lacks configure magic to detect mysql includes and libs, and to define USERDB_MYSQL and PASSDB_MYSQL in config.h. Matt

1 0

Re: [Dovecot] PATCH: mysql authentication
by Matthew Reimer 03 Oct '03

03 Oct '03

Timo Sirainen wrote: > On Fri, 2003-10-03 at 19:54, Matthew Reimer wrote: >>One question about how t_strdup works. How and who should memory >>returned by t_strdup be freed? My patch has a function my_get_str() >>which returns the value of t_strdup, and then I do this: >> >> user.uid = atoi(my_get_str(res, row, "uid")); /* XXX leak */ >> user.gid = atoi(my_get_str(res, row, "gid")); /* XXX leak */ >> >>Will this result in a memory leak? > > > No. > > Memory allocated by t_*() functions are freed "later". There's first > t_push(), then you allocate memory, then t_pop() frees it all. So they > never leak memory, but they could allocate more memory than necessary if > called inside loop. That can be fixed by adding t_push/t_pop calls > there. Nice! Thanks for the answer Timo. Matt

1 0

Re: [Dovecot] PATCH: mysql authentication
by Matthew Reimer 03 Oct '03

03 Oct '03

Here's another patch. This one isn't much different from the last patch, except it tries a little harder to make sure that the required fields are returned by the query (like the pgsql module does). One question about how t_strdup works. How and who should memory returned by t_strdup be freed? My patch has a function my_get_str() which returns the value of t_strdup, and then I do this: user.uid = atoi(my_get_str(res, row, "uid")); /* XXX leak */ user.gid = atoi(my_get_str(res, row, "gid")); /* XXX leak */ Will this result in a memory leak? Matt diff -u -r --new-file work/dovecot-0.99.10/doc/dovecot-mysql.conf work.patched/dovecot-0.99.10/doc/dovecot-mysql.conf --- work/dovecot-0.99.10/doc/dovecot-mysql.conf Wed Dec 31 16:00:00 1969 +++ work.patched/dovecot-0.99.10/doc/dovecot-mysql.conf Tue Sep 30 12:24:00 2003 @@ -0,0 +1,70 @@ +# For the mysql passdb module, you'll need a database with a table that +# contains fields for at least the userid and password. If you want to +# use the user@domain syntax, you might want to have a separate domain +# field as well. +# +# If your users all have the same uig/gid, and have predictable home +# directories, you can use the static userdb module to generate the home +# dir based on the userid and domain. In this case, you won't need fields +# for home, uid, or gid in the database. +# +# If you prefer to use the mysql userdb module, you'll want to add fields +# for home, uid, and gid. Here is an example table: +# +# CREATE TABLE users ( +# userid VARCHAR(128) NOT NULL, +# password VARCHAR(64) NOT NULL, +# home VARCHAR(256) NOT NULL, +# uid INTEGER NOT NULL, +# gid INTEGER NOT NULL, +# active CHAR(1) DEFAULT 'Y' NOT NULL +# ); + +db_host = localhost +db_port = 3306 +#db_unix_socket = /var/tmp/mysql.sock +db = users +db_user = dovecot-db +db_passwd = opensesame +db_client_flags = 0 + +# Default password scheme. +# +# Currently supported schemes include PLAIN, PLAIN-MD5, DIGEST-MD5, and CRYPT. +# +#default_pass_scheme = PLAIN-MD5 + +# Query to retrieve the password. +# +# The query should return one row, one column. If more than one row or column +# is returned, authentication will automatically fail. +# +# Available substitutions: +# %u = entire userid +# %n = user part of user@domain +# %d = domain part of user@domain +# +# Example: +# password_query = SELECT password FROM users WHERE userid = '%n' AND domain = '%d' +# password_query = SELECT password FROM users WHERE userid = '%u' AND active = 'Y' +# +#password_query = SELECT password FROM users WHERE userid = '%u' + +# Query to retrieve the user information. +# +# The query must return only one row. The columns to return are: +# home - Home directory +# mail - MAIL environment +# system_user - System user name (for initgroups()) +# uid - System UID +# gid - System GID +# +# Either home or mail is required. uid and gid are required. If more than one +# row is returned or there's missing fields, login will automatically fail. +# +# Examples +# user_query = SELECT home, uid, gid FROM users WHERE userid = '%n' AND domain = '%d' +# user_query = SELECT dir AS home, user AS uid, group AS gid FROM users where userid = '%u' +# user_query = SELECT home, 501 AS uid, 501 AS gid FROM users WHERE userid = '%u' +# +#user_query = SELECT home, uid, gid FROM users WHERE userid = '%u' diff -u -r --new-file work/dovecot-0.99.10/src/auth/Makefile.in work.patched/dovecot-0.99.10/src/auth/Makefile.in --- work/dovecot-0.99.10/src/auth/Makefile.in Thu Jun 26 09:15:11 2003 +++ work.patched/dovecot-0.99.10/src/auth/Makefile.in Tue Sep 30 12:24:00 2003 @@ -99,10 +99,10 @@ dovecot_auth_LDADD = ../lib-settings/libsettings.a ../lib/liblib.a $(AUTH_LIBS) $(RAND_LIBS) $(MODULE_LIBS) -dovecot_auth_SOURCES = auth-module.c db-ldap.c db-pgsql.c db-passwd-file.c login-connection.c main.c master-connection.c md5crypt.c mech.c mech-anonymous.c mech-cyrus-sasl2.c mech-plain.c mech-digest-md5.c mycrypt.c passdb.c passdb-ldap.c passdb-passwd.c passdb-passwd-file.c passdb-pam.c passdb-shadow.c passdb-vpopmail.c passdb-pgsql.c password-scheme.c userdb.c userdb-ldap.c userdb-passwd.c userdb-passwd-file.c userdb-static.c userdb-vpopmail.c userdb-pgsql.c +dovecot_auth_SOURCES = auth-module.c db-ldap.c db-pgsql.c db-mysql.c db-passwd-file.c login-connection.c main.c master-connection.c md5crypt.c mech.c mech-anonymous.c mech-cyrus-sasl2.c mech-plain.c mech-digest-md5.c mycrypt.c passdb.c passdb-ldap.c passdb-passwd.c passdb-passwd-file.c passdb-pam.c passdb-shadow.c passdb-vpopmail.c passdb-pgsql.c passdb-mysql.c password-scheme.c userdb.c userdb-ldap.c userdb-passwd.c userdb-passwd-file.c userdb-static.c userdb-vpopmail.c userdb-pgsql.c userdb-mysql.c -noinst_HEADERS = auth-login-interface.h auth-master-interface.h auth-mech-desc.h auth-module.h db-ldap.h db-pgsql.h db-passwd-file.h common.h login-connection.h master-connection.h md5crypt.h mech.h mycrypt.h passdb.h password-scheme.h userdb.h userdb-vpopmail.h +noinst_HEADERS = auth-login-interface.h auth-master-interface.h auth-mech-desc.h auth-module.h db-ldap.h db-pgsql.h db-mysql.h db-passwd-file.h common.h login-connection.h master-connection.h md5crypt.h mech.h mycrypt.h passdb.h password-scheme.h userdb.h userdb-vpopmail.h mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = ../../config.h @@ -116,17 +116,17 @@ LDFLAGS = @LDFLAGS@ LIBS = @LIBS@ dovecot_auth_OBJECTS = auth-module.$(OBJEXT) db-ldap.$(OBJEXT) \ -db-pgsql.$(OBJEXT) db-passwd-file.$(OBJEXT) login-connection.$(OBJEXT) \ +db-pgsql.$(OBJEXT) db-mysql.$(OBJEXT) db-passwd-file.$(OBJEXT) login-connection.$(OBJEXT) \ main.$(OBJEXT) master-connection.$(OBJEXT) md5crypt.$(OBJEXT) \ mech.$(OBJEXT) mech-anonymous.$(OBJEXT) mech-cyrus-sasl2.$(OBJEXT) \ mech-plain.$(OBJEXT) mech-digest-md5.$(OBJEXT) mycrypt.$(OBJEXT) \ passdb.$(OBJEXT) passdb-ldap.$(OBJEXT) passdb-passwd.$(OBJEXT) \ passdb-passwd-file.$(OBJEXT) passdb-pam.$(OBJEXT) \ passdb-shadow.$(OBJEXT) passdb-vpopmail.$(OBJEXT) \ -passdb-pgsql.$(OBJEXT) password-scheme.$(OBJEXT) userdb.$(OBJEXT) \ +passdb-pgsql.$(OBJEXT) passdb-mysql.$(OBJEXT) password-scheme.$(OBJEXT) userdb.$(OBJEXT) \ userdb-ldap.$(OBJEXT) userdb-passwd.$(OBJEXT) \ userdb-passwd-file.$(OBJEXT) userdb-static.$(OBJEXT) \ -userdb-vpopmail.$(OBJEXT) userdb-pgsql.$(OBJEXT) +userdb-vpopmail.$(OBJEXT) userdb-pgsql.$(OBJEXT) userdb-mysql.$(OBJEXT) dovecot_auth_DEPENDENCIES = ../lib-settings/libsettings.a \ ../lib/liblib.a dovecot_auth_LDFLAGS = @@ -295,6 +295,13 @@ ../../src/lib/strfuncs.h ../../src/lib/network.h \ ../../src/lib/str.h ../../src/lib-settings/settings.h \ db-pgsql.h +db-mysql.o: db-mysql.c ../../config.h common.h ../../src/lib/lib.h \ + ../../src/lib/compat.h ../../src/lib/macros.h \ + ../../src/lib/failures.h ../../src/lib/data-stack.h \ + ../../src/lib/mempool.h ../../src/lib/imem.h \ + ../../src/lib/strfuncs.h ../../src/lib/network.h \ + ../../src/lib/str.h ../../src/lib-settings/settings.h \ + db-mysql.h login-connection.o: login-connection.c common.h ../../src/lib/lib.h \ ../../config.h ../../src/lib/compat.h ../../src/lib/macros.h \ ../../src/lib/failures.h ../../src/lib/data-stack.h \ @@ -388,6 +395,14 @@ ../../src/lib/str.h ../../src/lib/strescape.h \ ../../src/lib/var-expand.h password-scheme.h db-pgsql.h \ passdb.h mech.h auth-login-interface.h +passdb-mysql.o: passdb-mysql.c ../../config.h common.h \ + ../../src/lib/lib.h ../../src/lib/compat.h \ + ../../src/lib/macros.h ../../src/lib/failures.h \ + ../../src/lib/data-stack.h ../../src/lib/mempool.h \ + ../../src/lib/imem.h ../../src/lib/strfuncs.h \ + ../../src/lib/str.h ../../src/lib/strescape.h \ + ../../src/lib/var-expand.h password-scheme.h db-mysql.h \ + passdb.h mech.h auth-login-interface.h passdb-shadow.o: passdb-shadow.c ../../config.h common.h \ ../../src/lib/lib.h ../../src/lib/compat.h \ ../../src/lib/macros.h ../../src/lib/failures.h \ @@ -428,6 +443,13 @@ ../../src/lib/imem.h ../../src/lib/strfuncs.h \ ../../src/lib/str.h ../../src/lib/strescape.h \ ../../src/lib/var-expand.h db-pgsql.h userdb.h +userdb-mysql.o: userdb-mysql.c ../../config.h common.h \ + ../../src/lib/lib.h ../../src/lib/compat.h \ + ../../src/lib/macros.h ../../src/lib/failures.h \ + ../../src/lib/data-stack.h ../../src/lib/mempool.h \ + ../../src/lib/imem.h ../../src/lib/strfuncs.h \ + ../../src/lib/str.h ../../src/lib/strescape.h \ + ../../src/lib/var-expand.h db-mysql.h userdb.h userdb-static.o: userdb-static.c ../../config.h common.h \ ../../src/lib/lib.h ../../src/lib/compat.h \ ../../src/lib/macros.h ../../src/lib/failures.h \ diff -u -r --new-file work/dovecot-0.99.10/src/auth/db-mysql.c work.patched/dovecot-0.99.10/src/auth/db-mysql.c --- work/dovecot-0.99.10/src/auth/db-mysql.c Wed Dec 31 16:00:00 1969 +++ work.patched/dovecot-0.99.10/src/auth/db-mysql.c Tue Sep 30 12:24:00 2003 @@ -0,0 +1,181 @@ +/* Copyright (C) 2003 Alex Howansky, Timo Sirainen */ + +#include "config.h" +#undef HAVE_CONFIG_H + +#if defined(PASSDB_MYSQL) || defined(USERDB_MYSQL) + +#include "common.h" +#include "network.h" +#include "str.h" +#include "settings.h" +#include "db-mysql.h" + +#include <limits.h> +#include <stddef.h> +#include <stdlib.h> + +#define DEF(type, name) { type, #name, offsetof(struct mysql_settings, name) } + +static struct setting_def setting_defs[] = { + DEF(SET_STR, db_host), + DEF(SET_STR, db_port), + DEF(SET_STR, db_unix_socket), + DEF(SET_STR, db), + DEF(SET_STR, db_user), + DEF(SET_STR, db_passwd), + DEF(SET_STR, db_client_flags), + DEF(SET_STR, password_query), + DEF(SET_STR, user_query), + DEF(SET_STR, default_pass_scheme) +}; + +struct mysql_settings default_mysql_settings = { + MEMBER(db_host) "localhost", + MEMBER(db_port) "0", + MEMBER(db_unix_socket) "/var/tmp/mysql.sock", + MEMBER(db) "email_accounts", + MEMBER(db_user) "dovecot", + MEMBER(db_passwd) "changeme", + MEMBER(db_client_flags) "0", + MEMBER(password_query) "SELECT password FROM users WHERE userid = '%u'", + MEMBER(user_query) "SELECT home, uid, gid FROM users WHERE userid = '%u'", + MEMBER(default_pass_scheme) "PLAIN-MD5" +}; + +static struct mysql_connection *mysql_connections = NULL; + +static int mysql_conn_open(struct mysql_connection *conn); +static void mysql_conn_close(struct mysql_connection *conn); + +void db_mysql_query(struct mysql_connection *conn, const char *query, + struct mysql_request *request) +{ + MYSQL_RES *res; + int failed; + + if (!conn->connected) { + if (!mysql_conn_open(conn)) { + request->callback(conn, request, NULL); + return; + } + } + + if (verbose_debug) + i_info("MYSQL: Performing query: %s", query); + + if (mysql_query(conn->mysql, query)) + i_info("MYSQL: Error executing query \"%s\": %s", query, + mysql_error(conn->mysql)); + + if ((res = mysql_store_result(conn->mysql))) + failed = FALSE; + else { + i_info("MYSQL: Error retrieving results: %s", + mysql_error(conn->mysql)); + failed = TRUE; + } + + request->callback(conn, request, failed ? NULL : res); + mysql_free_result(res); + i_free(request); +} + +static int mysql_conn_open(struct mysql_connection *conn) +{ + if (conn->connected) + return TRUE; + + if (conn->mysql == NULL) { + conn->mysql = mysql_init(NULL); + if (conn->mysql == NULL) { + i_error("MYSQL: mysql_init failed"); + return FALSE; + } + + if (!mysql_real_connect(conn->mysql, conn->set.db_host, + conn->set.db_user, conn->set.db_passwd, + conn->set.db, + atoi(conn->set.db_port), + conn->set.db_unix_socket, + strtoul(conn->set.db_client_flags, + NULL, 10))) { + i_error("MYSQL: Can't connect to database %s: %s", + conn->set.db, mysql_error(conn->mysql)); + return FALSE; + } + } + + conn->connected = TRUE; + return TRUE; +} + +static void mysql_conn_close(struct mysql_connection *conn) +{ + conn->connected = FALSE; + + if (conn->mysql != NULL) { + mysql_close(conn->mysql); + conn->mysql = NULL; + } +} + +static struct mysql_connection *mysql_conn_find(const char *config_path) +{ + struct mysql_connection *conn; + + for (conn = mysql_connections; conn != NULL; conn = conn->next) { + if (strcmp(conn->config_path, config_path) == 0) + return conn; + } + + return NULL; +} + +static const char *parse_setting(const char *key, const char *value, + void *context) +{ + struct mysql_connection *conn = context; + + return parse_setting_from_defs(conn->pool, setting_defs, + &conn->set, key, value); +} + +struct mysql_connection *db_mysql_init(const char *config_path) +{ + struct mysql_connection *conn; + pool_t pool; + + conn = mysql_conn_find(config_path); + if (conn != NULL) { + conn->refcount++; + return conn; + } + + pool = pool_alloconly_create("mysql_connection", 1024); + conn = p_new(pool, struct mysql_connection, 1); + conn->pool = pool; + + conn->refcount = 1; + + conn->config_path = p_strdup(pool, config_path); + conn->set = default_mysql_settings; + settings_read(config_path, parse_setting, conn); + + (void)mysql_conn_open(conn); + + conn->next = mysql_connections; + mysql_connections = conn; + return conn; +} + +void db_mysql_unref(struct mysql_connection *conn) +{ + if (--conn->refcount > 0) + return; + + mysql_conn_close(conn); + pool_unref(conn->pool); +} + +#endif diff -u -r --new-file work/dovecot-0.99.10/src/auth/db-mysql.h work.patched/dovecot-0.99.10/src/auth/db-mysql.h --- work/dovecot-0.99.10/src/auth/db-mysql.h Wed Dec 31 16:00:00 1969 +++ work.patched/dovecot-0.99.10/src/auth/db-mysql.h Tue Sep 30 12:24:00 2003 @@ -0,0 +1,51 @@ +#ifndef __DB_MYSQL_H +#define __DB_MYSQL_H + +#include <mysql.h> + +struct mysql_connection; +struct mysql_request; + +typedef void mysql_query_callback_t(struct mysql_connection *conn, + struct mysql_request *request, + MYSQL_RES *res); + +struct mysql_settings { + const char *db_host; + const char *db_port; + const char *db_unix_socket; + const char *db; + const char *db_user; + const char *db_passwd; + const char *db_client_flags; + const char *password_query; + const char *user_query; + const char *default_pass_scheme; +}; + +struct mysql_connection { + struct mysql_connection *next; + + pool_t pool; + int refcount; + + char *config_path; + struct mysql_settings set; + + MYSQL *mysql; + + unsigned int connected:1; +}; + +struct mysql_request { + mysql_query_callback_t *callback; + void *context; +}; + +void db_mysql_query(struct mysql_connection *conn, const char *query, + struct mysql_request *request); + +struct mysql_connection *db_mysql_init(const char *config_path); +void db_mysql_unref(struct mysql_connection *conn); + +#endif diff -u -r --new-file work/dovecot-0.99.10/src/auth/master-connection.c work.patched/dovecot-0.99.10/src/auth/master-connection.c --- work/dovecot-0.99.10/src/auth/master-connection.c Mon May 26 08:27:13 2003 +++ work.patched/dovecot-0.99.10/src/auth/master-connection.c Tue Sep 30 12:24:00 2003 @@ -55,7 +55,7 @@ reply.virtual_user_idx = reply_add(buf, user->virtual_user); reply.mail_idx = reply_add(buf, user->mail); - p = strstr(user->home, "/./"); + p = user->home ? strstr(user->home, "/./") : NULL; if (p == NULL) { reply.home_idx = reply_add(buf, user->home); reply.chroot_idx = reply_add(buf, NULL); diff -u -r --new-file work/dovecot-0.99.10/src/auth/passdb-mysql.c work.patched/dovecot-0.99.10/src/auth/passdb-mysql.c --- work/dovecot-0.99.10/src/auth/passdb-mysql.c Wed Dec 31 16:00:00 1969 +++ work.patched/dovecot-0.99.10/src/auth/passdb-mysql.c Tue Sep 30 12:24:00 2003 @@ -0,0 +1,171 @@ +/* Copyright (C) 2003 Alex Howansky, Timo Sirainen */ + +#include "config.h" +#undef HAVE_CONFIG_H + +#ifdef PASSDB_MYSQL + +#include "common.h" +#include "str.h" +#include "strescape.h" +#include "var-expand.h" +#include "password-scheme.h" +#include "db-mysql.h" +#include "passdb.h" + +#include <mysql.h> +#include <stdlib.h> +#include <string.h> + +struct passdb_mysql_connection { + struct mysql_connection *conn; +}; + +struct passdb_mysql_request { + struct mysql_request request; + + enum passdb_credentials credentials; + union { + verify_plain_callback_t *verify_plain; + lookup_credentials_callback_t *lookup_credentials; + } callback; + + char password[1]; +}; + +static struct passdb_mysql_connection *passdb_mysql_conn; + +static void mysql_handle_request(struct mysql_connection *conn, + struct mysql_request *request, MYSQL_RES *res) +{ + struct passdb_mysql_request *mysql_request = + (struct passdb_mysql_request *) request; + struct auth_request *auth_request = request->context; + const char *user, *password, *scheme; + int ret = 0; + + user = auth_request->user; + password = NULL; + + if (res != NULL) { + if (mysql_num_rows(res) == 0) { + if (verbose) + i_info("mysql(%s): Unknown user", user); + } else if (mysql_num_rows(res) > 1) { + i_error("mysql(%s): Multiple matches for user", user); + } else if (mysql_num_fields(res) != 1) { + i_error("mysql(%s): Password query returned " + "more than one field", user); + } else { + MYSQL_ROW row; + + row = mysql_fetch_row(res); + if (row) + password = t_strdup(row[0]); + } + } + + scheme = password_get_scheme(&password); + if (scheme == NULL) { + scheme = conn->set.default_pass_scheme; + i_assert(scheme != NULL); + } + + if (mysql_request->credentials != -1) { + passdb_handle_credentials(mysql_request->credentials, + user, password, scheme, + mysql_request->callback.lookup_credentials, + auth_request); + return; + } + + /* verify plain */ + if (password == NULL) { + mysql_request->callback.verify_plain(PASSDB_RESULT_USER_UNKNOWN, + auth_request); + return; + } + + ret = password_verify(mysql_request->password, password, + scheme, user); + if (ret < 0) + i_error("mysql(%s): Unknown password scheme %s", user, scheme); + else if (ret == 0) { + if (verbose) + i_info("mysql(%s): Password mismatch", user); + } + + mysql_request->callback.verify_plain(ret > 0 ? PASSDB_RESULT_OK : + PASSDB_RESULT_PASSWORD_MISMATCH, + auth_request); +} + +static void mysql_lookup_pass(struct auth_request *auth_request, + struct mysql_request *mysql_request) +{ + struct mysql_connection *conn = passdb_mysql_conn->conn; + const char *query; + string_t *str; + + str = t_str_new(512); + var_expand(str, conn->set.password_query, + str_escape(auth_request->user), NULL); + query = str_c(str); + + mysql_request->callback = mysql_handle_request; + mysql_request->context = auth_request; + + db_mysql_query(conn, query, mysql_request); +} + +static void +mysql_verify_plain(struct auth_request *request, const char *password, + verify_plain_callback_t *callback) +{ + struct passdb_mysql_request *mysql_request; + + mysql_request = i_malloc(sizeof(struct passdb_mysql_request) + + strlen(password)); + mysql_request->credentials = -1; + mysql_request->callback.verify_plain = callback; + strcpy(mysql_request->password, password); + + mysql_lookup_pass(request, &mysql_request->request); +} + +static void mysql_lookup_credentials(struct auth_request *request, + enum passdb_credentials credentials, + lookup_credentials_callback_t *callback) +{ + struct passdb_mysql_request *mysql_request; + + mysql_request = i_new(struct passdb_mysql_request, 1); + mysql_request->credentials = credentials; + mysql_request->callback.lookup_credentials = callback; + + mysql_lookup_pass(request, &mysql_request->request); +} + +static void passdb_mysql_init(const char *args) +{ + struct mysql_connection *conn; + + passdb_mysql_conn = i_new(struct passdb_mysql_connection, 1); + passdb_mysql_conn->conn = conn = db_mysql_init(args); +} + +static void passdb_mysql_deinit(void) +{ + db_mysql_unref(passdb_mysql_conn->conn); + i_free(passdb_mysql_conn); +} + +struct passdb_module passdb_mysql = { + passdb_mysql_init, + passdb_mysql_deinit, + + mysql_verify_plain, + mysql_lookup_credentials +}; + +#endif diff -u -r --new-file work/dovecot-0.99.10/src/auth/passdb.c work.patched/dovecot-0.99.10/src/auth/passdb.c --- work/dovecot-0.99.10/src/auth/passdb.c Sun May 18 05:26:28 2003 +++ work.patched/dovecot-0.99.10/src/auth/passdb.c Tue Sep 30 12:24:00 2003 @@ -110,6 +110,10 @@ if (strcasecmp(name, "pgsql") == 0) passdb = &passdb_pgsql; #endif +#ifdef PASSDB_MYSQL + if (strcasecmp(name, "mysql") == 0) + passdb = &passdb_mysql; +#endif #ifdef HAVE_MODULES passdb_module = passdb != NULL ? NULL : auth_module_open(name); if (passdb_module != NULL) { diff -u -r --new-file work/dovecot-0.99.10/src/auth/passdb.h work.patched/dovecot-0.99.10/src/auth/passdb.h --- work/dovecot-0.99.10/src/auth/passdb.h Thu Mar 20 07:46:33 2003 +++ work.patched/dovecot-0.99.10/src/auth/passdb.h Tue Sep 30 12:24:00 2003 @@ -58,6 +58,7 @@ extern struct passdb_module passdb_vpopmail; extern struct passdb_module passdb_ldap; extern struct passdb_module passdb_pgsql; +extern struct passdb_module passdb_mysql; void passdb_init(void); void passdb_deinit(void); diff -u -r --new-file work/dovecot-0.99.10/src/auth/userdb-mysql.c work.patched/dovecot-0.99.10/src/auth/userdb-mysql.c --- work/dovecot-0.99.10/src/auth/userdb-mysql.c Wed Dec 31 16:00:00 1969 +++ work.patched/dovecot-0.99.10/src/auth/userdb-mysql.c Tue Sep 30 12:24:00 2003 @@ -0,0 +1,160 @@ +/* Copyright (C) 2003 Alex Howansky, Timo Sirainen */ + +#include "config.h" +#undef HAVE_CONFIG_H + +#ifdef USERDB_MYSQL + +#include "common.h" +#include "str.h" +#include "strescape.h" +#include "var-expand.h" +#include "db-mysql.h" +#include "userdb.h" + +#include <mysql.h> +#include <stdlib.h> +#include <string.h> + +struct userdb_mysql_connection { + struct mysql_connection *conn; +}; + +struct userdb_mysql_request { + struct mysql_request request; + userdb_callback_t *userdb_callback; + + char username[1]; /* variable width */ +}; + +static struct userdb_mysql_connection *userdb_mysql_conn; + +static int is_result_valid(MYSQL_RES *res) +{ + int i, n_fields, found; + MYSQL_FIELD *fields; + + if (res == NULL) { + i_error("MYSQL: Query failed"); + return FALSE; + } + + if (mysql_num_rows(res) == 0) { + if (verbose) + i_error("MYSQL: Authenticated user not found"); + return FALSE; + } + + n_fields = mysql_num_fields(res); + fields = mysql_fetch_fields(res); + + /* Make sure the 'uid' field exists. */ + for (found = 0, i = 0; i < n_fields; i++) + if (strcmp("uid", fields[i].name) == 0) { + found = 1; + break; + } + + if (!found) { + i_error("MYSQL: User query did not return 'uid' field"); + return FALSE; + } + + /* Make sure the 'gid' field exists. */ + for (found = 0, i = 0; i < n_fields; i++) + if (strcmp("gid", fields[i].name) == 0) { + found = 1; + break; + } + + if (!found) { + i_error("MYSQL: User query did not return 'gid' field"); + return FALSE; + } + + return TRUE; +} + +static const char *my_get_str(MYSQL_RES *res, MYSQL_ROW row, const char *field) +{ + int i, n_fields; + unsigned long *lengths; + MYSQL_FIELD *fields; + + n_fields = mysql_num_fields(res); + lengths = mysql_fetch_lengths(res); + fields = mysql_fetch_fields(res); + for (i = 0; i < n_fields; i++) + if (strcmp(field, fields[i].name) == 0) + return (const char *) lengths[i] == 0 ? + NULL : t_strdup(row[i]); + + return NULL; +} + +static void mysql_handle_request(struct mysql_connection *conn __attr_unused__, + struct mysql_request *request, MYSQL_RES *res) +{ + struct userdb_mysql_request *urequest = + (struct userdb_mysql_request *) request; + struct user_data user; + MYSQL_ROW row; + + if (res != NULL && is_result_valid(res) && + (row = mysql_fetch_row(res))) { + memset(&user, 0, sizeof(user)); + user.virtual_user = urequest->username; + user.system_user = my_get_str(res, row, "system_user"); + user.home = my_get_str(res, row, "home"); + user.mail = my_get_str(res, row, "mail"); + user.uid = atoi(my_get_str(res, row, "uid")); /* XXX leak */ + user.gid = atoi(my_get_str(res, row, "gid")); /* XXX leak */ + urequest->userdb_callback(&user, request->context); + } else { + urequest->userdb_callback(NULL, request->context); + } +} + +static void userdb_mysql_lookup(const char *user, userdb_callback_t *callback, + void *context) +{ + struct mysql_connection *conn = userdb_mysql_conn->conn; + struct userdb_mysql_request *request; + const char *query; + string_t *str; + + str = t_str_new(512); + var_expand(str, conn->set.user_query, str_escape(user), NULL); + query = str_c(str); + + request = i_malloc(sizeof(struct userdb_mysql_request) + strlen(user)); + request->request.callback = mysql_handle_request; + request->request.context = context; + request->userdb_callback = callback; + strcpy(request->username, user); + + db_mysql_query(conn, query, &request->request); +} + +static void userdb_mysql_init(const char *args) +{ + struct mysql_connection *conn; + + userdb_mysql_conn = i_new(struct userdb_mysql_connection, 1); + userdb_mysql_conn->conn = conn = db_mysql_init(args); +} + +static void userdb_mysql_deinit(void) +{ + db_mysql_unref(userdb_mysql_conn->conn); + i_free(userdb_mysql_conn); +} + +struct userdb_module userdb_mysql = { + userdb_mysql_init, + userdb_mysql_deinit, + + userdb_mysql_lookup +}; + +#endif diff -u -r --new-file work/dovecot-0.99.10/src/auth/userdb.c work.patched/dovecot-0.99.10/src/auth/userdb.c --- work/dovecot-0.99.10/src/auth/userdb.c Sun May 18 05:26:28 2003 +++ work.patched/dovecot-0.99.10/src/auth/userdb.c Tue Sep 30 12:24:00 2003 @@ -49,6 +49,10 @@ if (strcasecmp(name, "pgsql") == 0) userdb = &userdb_pgsql; #endif +#ifdef USERDB_MYSQL + if (strcasecmp(name, "mysql") == 0) + userdb = &userdb_mysql; +#endif #ifdef HAVE_MODULES userdb_module = userdb != NULL ? NULL : auth_module_open(name); if (userdb_module != NULL) { diff -u -r --new-file work/dovecot-0.99.10/src/auth/userdb.h work.patched/dovecot-0.99.10/src/auth/userdb.h --- work/dovecot-0.99.10/src/auth/userdb.h Sun May 18 05:26:28 2003 +++ work.patched/dovecot-0.99.10/src/auth/userdb.h Tue Sep 30 12:24:00 2003 @@ -29,6 +29,7 @@ extern struct userdb_module userdb_vpopmail; extern struct userdb_module userdb_ldap; extern struct userdb_module userdb_pgsql; +extern struct userdb_module userdb_mysql; void userdb_init(void); void userdb_deinit(void);

2 1

Re: [Dovecot] PATCH: mysql authentication
by Matthew Reimer 03 Oct '03

03 Oct '03

Timo Sirainen wrote: > > On Saturday, Aug 30, 2003, at 02:16 Europe/Helsinki, Matthew Reimer > wrote: > >> Here's a patch that implements mysql authentication. I started with >> the pgsql files and tweaked them to use mysql instead. It works for >> me, but there might be a couple of memory leaks. I'm welcome to >> suggestions on how to clean it up so it can be committed. > > Thank you. I'll look at it more closely later, but it looked fine with > a quick look. > > It would be nice to be able to use asynchronous database lookups. I'm > not sure how easy that is with MySQL, of if it's possible at all. With > PostgreSQL it looked annoyingly difficult so I haven't done it yet. > > Synchronous calls anyway mean that there's only one SQL statement > executing at a time and that may slow down the authentication if > there's a _lot_ of users logging in constantly. If that's a problem, > growing auth_count should help at least some. It specifies the number > of auth processes that respond to the authentication queries. > > And some day I'll probably move the sql stuff into separate lib-sql > and have only a single sql authenticator.. I'm not sure what you mean by asynchronous database lookups. Do you mean you'd like to be able to fire off a db lookup and then come back later to get the results? Like blocking vs non-blocking? I've pasted what may be relevant mysql documentation below in case it might help answer the question. N db handles could be allocated, giving us N simultaneous lookups. Matt --- From http://www.mysql.com/doc/en/C_API_function_overview.html: There are two ways for a client to process result sets. One way is to retrieve the entire result set all at once by calling mysql_store_result(). This function acquires from the server all the rows returned by the query and stores them in the client. The second way is for the client to initiate a row-by-row result set retrieval by calling mysql_use_result(). This function initialises the retrieval, but does not actually get any rows from the server. In both cases, you access rows by calling mysql_fetch_row(). With mysql_store_result(), mysql_fetch_row() accesses rows that have already been fetched from the server. With mysql_use_result(), mysql_fetch_row() actually retrieves the row from the server. Information about the size of the data in each row is available by calling mysql_fetch_lengths(). After you are done with a result set, call mysql_free_result() to free the memory used for it. The two retrieval mechanisms are complementary. Client programs should choose the approach that is most appropriate for their requirements. In practice, clients tend to use mysql_store_result() more commonly. An advantage of mysql_store_result() is that because the rows have all been fetched to the client, you not only can access rows sequentially, you can move back and forth in the result set using mysql_data_seek() or mysql_row_seek() to change the current row position within the result set. You can also find out how many rows there are by calling mysql_num_rows(). On the other hand, the memory requirements for mysql_store_result() may be very high for large result sets and you are more likely to encounter out-of-memory conditions. An advantage of mysql_use_result() is that the client requires less memory for the result set because it maintains only one row at a time (and because there is less allocation overhead, mysql_use_result() can be faster). Disadvantages are that you must process each row quickly to avoid tying up the server, you don't have random access to rows within the result set (you can only access rows sequentially), and you don't know how many rows are in the result set until you have retrieved them all. Furthermore, you must retrieve all the rows even if you determine in mid-retrieval that you've found the information you were looking for. --- end

1 0

[Dovecot] can't read attachments using javamail with dovecot
by Jonas Bosson 03 Oct '03

03 Oct '03

Dear folks, this might be a java-bug, but it seems to occur only when connecting to dovecot-IMAP. UW and Cyrus-ditto works, while when I try to read attachments (base64), I get slapped in the face with this: java.lang.NullPointerException at com.sun.mail.iap.Response.parse(Response.java:99) at com.sun.mail.iap.Response.<init>(Response.java:68) at com.sun.mail.imap.protocol.IMAPResponse.<init>(IMAPResponse.java:31) at com.sun.mail.imap.protocol.IMAPResponse.readResponse(IMAPResponse.java:105) at com.sun.mail.imap.protocol.IMAPProtocol.readResponse(IMAPProtocol.java:153) at com.sun.mail.iap.Protocol.command(Protocol.java:215) at com.sun.mail.imap.protocol.IMAPProtocol.fetch(IMAPProtocol.java:882) at com.sun.mail.imap.protocol.IMAPProtocol.fetch(IMAPProtocol.java:874) at com.sun.mail.imap.protocol.IMAPProtocol.fetchBody(IMAPProtocol.java:677) at com.sun.mail.imap.IMAPInputStream.fill(IMAPInputStream.java:74) at com.sun.mail.imap.IMAPInputStream.read(IMAPInputStream.java:105) at com.sun.mail.util.BASE64DecoderStream.decode(BASE64DecoderStream.java:143) at com.sun.mail.util.BASE64DecoderStream.read(BASE64DecoderStream.java:54) at se.illuminet.httpd.mail.MailXMLService.serviceXml(MailXMLService.java:361) This occurs in booth javamail 1.2 and 1.3(.1) using dovecot. Of course this unfriendly/unhandled response is a problem with javamail while biting the dust. Further analysis points to that the reading works OK up until 2^16 bytes, so it fails either in reading the tail of the attachment or resuming after the first buffered data is consumed. I tried the BODYSTRCUTURE-patch (booth #1 and then #2), but it didn't help. Now I am fresh out of ideas. The java-bug has a three week delay to surface on "bug-parade". But I still have to explain why it works in UW/Cyrus and not with dovecot. Next step would be to add trace-lines in dovecot. Any ideas? /Jonas

2 6

[Dovecot] pop3s in Outlook
by Antonin Karasek 03 Oct '03

03 Oct '03

Hi, I'm using Dovecot for pop3-ssl. Unofortunatelly, most of my users are using MS Outlook. I want them to be able to remove standard mesage: "The certificat is not signed by...", but I don't know how :-( In the dialog isn't a button "Trust this certificate forever"... Is there anybody, who know, how to solve this? Many thanks.

2 1

[Dovecot] Handling of X-Status flags
by Bernard Blackham 29 Sep '03

29 Sep '03

Hi all, I've done a bit of searching and haven't seen anybody else coming across this problem yet: I noticed that Dovecot uses the opposite flags for marking messages as deleted and draft to most other MUAs I've seen or used: With PINE, mutt and uw-imapd at least, messages are marked with X-Status 'D' for Deleted, and 'T' for drafT. Dovecot reverses this behaviour, using 'D' for Draft, and 'T' for Trashed. Was there any reason behind this? Or have I gone loopy? At our site, we have users reading mail with a mix of PINE locally, and through dovecot via WebMail and there seems to arise a bit of confusion between the two flags. Attached is a patch that reverses this behaviour (prepared against 0.99.10 but applies with a little fuzz to cvs). I'd like to hear people's comments on the issue... is it just me? :) Thanks, Bernard. -- Bernard Blackham bernard at blackham dot com dot au

2 2

[Dovecot] UIDPLUS?
by Keith Edmunds 29 Sep '03

29 Sep '03

Any plans to implement UIDPLUS in Dovecot? Keith

2 1

[Dovecot] Odd problem with dovecot segfaulting
by Tim Miller 29 Sep '03

29 Sep '03

Hi All, I installed dovecot on one of my servers the other day, and I want to use it in a vhosting environment. To this end, I have set it up to use password file authentication with a passwd file specified by me. This file will contain both system users and virtual accounts. To test it, I set up two accounts in the dovecot passwd file. One is a system user, I give his home dir in the correct field, along with the MD5 hash of his password in its field, and everything seems to work OK (he can login, read mail out of /var/spool/mail/user etc.). The seconmd account is a vhosted account, and I set the uid and gid to that under which the vhosting account exists. I did not set a home dir, but I set a mail dir in /var/spool/vmail/imap/vhost/user, and made this dir group writeable by dovecot. The user can login, but immediately upon authentication, dovecot segfaults (the log reports an "Internal login failure" and the authentication process is killed with signal 11, i.e. a segfault). Has anyone encountered this before? Is this even the right way to set up vhosting (I don't want to go with LDAP or SQL authentication right at the moment, but I may move to that later on)? Are there any things I should look for (this is probably due to something I've done wrong) or make dovecot be a bit more verbose in reporting errors to its log? Thanks in advance for any help. From what I've seen so far, dovecot looks like an excellent product. Best, Tim Miller

2 1

[Dovecot] pine and mozilla at the same time
by Gasha 26 Sep '03

26 Sep '03

Hi all, what is the best way to read e-mail from server using "pine" ?? I would like to use graphical IMAP client, mozilla for example. And sometimes run pine from shell. mbox or Maildir? Or maybe setup pine to use IMAP server on "localhost" ?? Gasha

2 1

[Dovecot] can't read attachments using javamail with dovecot
by Jonas Bosson 25 Sep '03

25 Sep '03

Dear folks, this might be a javamail-bug, but it seems to occur only when connecting to dovecot-IMAP. UW and Cyrus-ditto works, while when I try to read attachments (base64), I get slapped in the face with this: java.lang.NullPointerException at com.sun.mail.iap.Response.parse(Response.java:99) at com.sun.mail.iap.Response.<init>(Response.java:68) at com.sun.mail.imap.protocol.IMAPResponse.<init>(IMAPResponse.java:31) at com.sun.mail.imap.protocol.IMAPResponse.readResponse(IMAPResponse.java:105) at com.sun.mail.imap.protocol.IMAPProtocol.readResponse(IMAPProtocol.java:153) at com.sun.mail.iap.Protocol.command(Protocol.java:215) at com.sun.mail.imap.protocol.IMAPProtocol.fetch(IMAPProtocol.java:882) at com.sun.mail.imap.protocol.IMAPProtocol.fetch(IMAPProtocol.java:874) at com.sun.mail.imap.protocol.IMAPProtocol.fetchBody(IMAPProtocol.java:677) at com.sun.mail.imap.IMAPInputStream.fill(IMAPInputStream.java:74) at com.sun.mail.imap.IMAPInputStream.read(IMAPInputStream.java:105) at com.sun.mail.util.BASE64DecoderStream.decode(BASE64DecoderStream.java:143) at com.sun.mail.util.BASE64DecoderStream.read(BASE64DecoderStream.java:54) at se.illuminet.httpd.mail.MailXMLService.serviceXml(MailXMLService.java:361) This occurs in booth javamail 1.2 and 1.3(.1) using dovecot. Of course this unfriendly/unhandled response is a problem with javamail while it bites the dust. Further analysis points to that the reading works OK up until 2^16 bytes, so it fails either in reading the tail of the attachment or resuming after the first buffered data is consumed. I tried the BODYSTRCUTURE-patch (booth #1 and then #2), but it didn't help. Now I am fresh out of ideas. The java-bug has a three week delay to surface on "bug-parade". But I still have to explain why it works in UW/Cyrus and not with dovecot. Next step would be to add trace-lines in dovecot. Any ideas? /Jonas

1 0

[Dovecot] Multiple instances of .customflags staying open
by Ron 25 Sep '03

25 Sep '03

# cat /proc/version Linux version 2.4.20-18.9 (bhcompile(a)daffy.perf.redhat.com) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu May 29 07:09:43 EDT 2003 # dovecot --version 0.99.10 I've just recently noticed a serious problem with my system. After about an hour or so I get errors in /var/log/maillog such as this; Sep 21 06:40:16 the-system imap(ray): opendir() failed with file \ \/home/ray/Maildir//new: Too many open files I investigated with 'lsof' and found that many copies of '.customflags' were open for each and every folder. ie; Each folder's '.customflags' file was open 15 times! I suspect that postfix is not able to store newly collected email while this is occuring, therefore I am likely losing messages. I've tried with multiple mail clients (Sylpheed & Evolution) and multiple users, always with the same result. Further investigation indicates that each time the client scans for new mail another instance of each and every '.customflags' is opened. As I have the client set for checking at five minute intervals then it was probably 75 minutes until the client barfed. Less, if I manualy scan for new mail a few times. If I shutdown the client and restart it then everything is fine for about an hour. Running 'lsof /home/ray/Maildir/.customflags' on the server I can see the list of files increasing each time the client checks for new mail. Any help would be appreciated!

4 14

[Dovecot] Re: Bug: Message time gets changed during move/copy
by Timo Sirainen 25 Sep '03

25 Sep '03

On Sat, 2003-09-13 at 13:10, Akhilesh Agarwal wrote: > SERVER > > * Redhat 9.0 stable (with all up2date updates installed) > * Sendmail-8.12.8-6.90 > * Dovecot 0.99.10 release > * On the workstation running Outlook Express, there should be > some existing messages in Local Folders. (example: message > downloaded from a POP3 server) > * Change the time zone of the workstation machine to non-GMT > time zone. In my case GMT +0530 (Indian Standard Time) > * Create a test IMAP account on the server > * Configure Outlook Express to connect to the IMAP account. > * Now select a message in the Local Folders and copy it to a > folder on the IMAP server. > * If you check the message time on the IMAP account, you will > find that +0530 hrs was added to the message time. (+0530 is > apparently the time zone of my workstation as configure above) Sorry for taking this long to reply, it always takes so much effort to turn on my Windows computer :) I cannot reproduce this. I have my server and workstation set to GMT+3 and copying message from Dovecot to OE6 local folder and back keeps the message date the same. Or actually it looks like IMAP -> local folder copies using the message's Date field rather than IMAP's INTERNALDATE which Received-field shows. I'm not sure if this could be Dovecot's or OE6's fault .. Has anyone else seen timestamps going wrong when copying? > Can anyone please confirm this and let me know, as I am not subscribed > to the list. It actually never made it to list because it was decided to be spam (mostly due to being HTML).

1 0

[Dovecot] status of maildir and mbox
by Eric S. Johansson 25 Sep '03

25 Sep '03

what is the status of mixed support of maildir and mbox at the same time? Has any progress been made? --- eric

3 7

Re: [Dovecot] PC-Pine "Junk in end of group" (fwd)
by Paul 25 Sep '03

25 Sep '03

Also, this line is popping up in my syslog. It wasn't there before the recompile: imap(paul): Error indexing mbox file /home/paul/mail/postponed-msgs: LF not found where expected Paul ---------- Forwarded message ---------- Date: Wed, 24 Sep 2003 14:17:20 -0400 (Eastern Daylight Time) From: Paul <lists(a)pote.com> To: dovecot(a)procontrol.fi Subject: Re: [Dovecot] PC-Pine "Junk in end of group" Timo, thanks - I applied the patch and recompiled, but I am still getting the same error, under the same circumstances. Paul

2 1

[Dovecot] PC-Pine "Junk in end of group"
by Paul Adams 25 Sep '03

25 Sep '03

I am running PC-Pine under Windows XP, connecting via SSL to a Dovecot IMAP server (0.99.10-2 under Debian woody). When I open a mail folder (mbox format) in Pine I get the following non-fatal error: [Junk in end of group: pn=undisclosed-recipients al= dn=] A similar error was reported to comp.mail.pine as happening with a Lotus Domino server. Mark Crispin explained it as a server-side bug: http://groups.google.com/groups?hl=en&lr=lang_en&ie=UTF-8&safe=off&threadm=… Is this something that can be easily fixed? Paul

3 3

[Dovecot] debian installation
by Ewald Geschwinde 23 Sep '03

23 Sep '03

apt-get install postfix-tls postfix-pgsql sasl2-bin libsasl2-modules postgresql libpam-pgsql Reading Package Lists... Done Building Dependency Tree... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: Sorry, but the following packages have unmet dependencies: sasl2-bin: Depends: libcomerr1-kerberos4kth (>= 1.2.2-2) but it is not installable E: Sorry, broken packages I think the new users should know this Maybe it takes some time before the sasl2-bin is update Regards Ewald Geschwinde

3 3

[Dovecot] shared folders?
by Samuel Verner 23 Sep '03

23 Sep '03

hello, does dovecot support shared folders (a very nice feature in cyrus-imapd)? sam

2 1

[Dovecot] dovecot IMAP misserving problem?
by Warren Togami 23 Sep '03

23 Sep '03

http://togami.com/~warren/archive/2003/evolution-1.4.4-crash.mbox I suspect that dovecot-0.99.10 is misserving this message in some way that is confusing some IMAP clients. This behavior causes evolution-1.4.4 to segfault, and squirrelmail-1.4.1 to be unable to read the message. The same message served by uw-imapd works works fine in both evolution and squirrelmail. https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=104288 Red Hat Bugzilla dovecot report https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=104289 Red Hat Bugzilla evolution segfault report http://bugzilla.ximian.com/show_bug.cgi?id=48418 Ximian evolution segfault report

2 6

[Dovecot] problem with auth
by Ewald Geschwinde 22 Sep '03

22 Sep '03

I'm new to dovecot (it's a cool piece of software!!!) I'm using Debian woody I'm trying to start the server but then there is this mail Do I have to set an environment variable or waht does this mean. I'm trying to use a pgsql backend for authentification and I have compiled it from source /usr/local/libexec/dovecot/dovecot-auth start dovecot-auth: Fatal: MECHANISMS environment is unset Regards Ewald Geschwinde

2 1

[Dovecot] feature request: maildirquota
by Eero Volotinen 21 Sep '03

21 Sep '03

Hope maildirquota++ is soon supported, without it, dovecot is useless in my use (mail hosting with maildirquotas). Also QUOTA cabability in dovecot is needed to get to use my webmail plugins that use a001 CAPABILITY to get quota support. Courier imapd supports this. --snippet from quota usage plugin to squirrelmail-- function sqimap_get_quota ($imap_stream, $mailbox) { if (check_quota_capability($imap_stream, "QUOTA")) { fputs ($imap_stream, "a001 GETQUOTAROOT \"$mailbox\"\r\n"); $read_ary = sqimap_read_data ($imap_stream, 'a001', true, $result, $message); for ($i = 0; $i < count($read_ary); $i++) { if (ereg("STORAGE", $read_ary[$i])) { $tempusage = ereg_replace("^.*[(]STORAGE +(.*)[)].*$", "\\1", $read_ary[$i]); $usagearray = explode(" ", $tempusage); return $usagearray[0].":".$usagearray[1]; } } } return "NOQUOTA"; } function check_quota_capability($imap_stream, $capability) { global $imap_general_debug; fputs ($imap_stream, "a001 CAPABILITY\r\n"); $read_ary = sqimap_read_data($imap_stream, 'a001', true, $a, $b); for($i = 0; $i < count($read_ary); $i++) { if (ereg("QUOTA", $read_ary[$i])) return TRUE; } return false; } -- end snippet-- -- Eero

3 2

[Dovecot] Secure coding guide
by Timo Sirainen 21 Sep '03

21 Sep '03

I thought I'd write a small guide to what Dovecot's "secure coding techniques" are and how you'd use them: http://dovecot.fi/doc/securecoding.txt

1 0

[Dovecot] convert wu-imap Maildir format to dovecot
by Alin Osan 21 Sep '03

21 Sep '03

Hello, I intend to migrate a mail server with Maildir from wu-imap to dovecot imap. Using horde/IMP, users can not access their imap forders, as wu-imap created Mail directory that holds all created folders. Dovecot could not detect the mail directory so I had to put default_mail_env = ~/Maildir in dovecot.conf. Before I begin to read the source-code of dovecot or try to migrate the the mailboxes using a shell script, is there any way I can make dovecot read the wu-imap folders format? Please suggest any solution that you find viable. Thank you. -- -- We are what we repeatedly do. Excellence, then, is not an act, but a habit. -- Alin Osan

3 7

[Dovecot] namespaces
by Brian Marcotte 21 Sep '03

21 Sep '03

I'm trying to use the namespaces feature to set up dovecot to look just like our existing Courier IMAP server, and our previous Cyrus server. That is, all folders are subfolders of INBOX, and the hierachy separator is ".". I put this in the configuration file: namespace private { separator = . prefix = INBOX. location = maildir:~/.maildir } This makes subfolders work correctly, but it can't find the INBOX: x1 select INBOX x1 NO Unknown namespace. Also, I don't really want to specify the location here. I want to use the userdb settings (I'm using password-file). Is there a way to make it use my setting in the userdb/password-file? Also, I'm not sure if it actually matters, but when selecting a folder, the number of RECENT messages is always the same as the number of messages which EXISTS: x2 select INBOX.Tech * FLAGS (\Answered \Flagged \Deleted \Seen \Draft) * OK [PERMANENTFLAGS (\Answered \Flagged \Deleted \Seen \Draft \*)] Flags permitted. * 70 EXISTS * 70 RECENT * OK [UNSEEN 69] First unseen. * OK [UIDVALIDITY 1057356619] UIDs valid * OK [UIDNEXT 181] Predicted next UID x2 OK [READ-WRITE] Select completed. I'm afraid some clients may use this information for something, and display incorrect information to the user. Thanks! -- - Brian

2 6

[Dovecot] Feature question/request
by Dan Sully 20 Sep '03

20 Sep '03

So I have a bunch of users who are roaming - IE no static IP address from all over the internet. Some of them are able to use SMTP-AUTH which is great, but for those that can't, a pop before smtp solution is in place using relay-ctrl-age & cdb files via qmail. Would it be desirable to have this feature in dovecot? I'd really like to ditch qmail-pop3d, etc. vpopmail has a open_smtp_relay() when using vchkpw directly. -D -- <iNoah> I won't be satisfied until I have a rectally-insertable laptop

5 8

[Dovecot] Multiple auth checkers
by Dan Sully 18 Sep '03

18 Sep '03

I noticed this is in the TODO: - support for multiple auth checkers. passdb+userdb should be tied together. auth process configurations really should be used for this.. and is functionality that I really would like, as I have local users (passwd+shadow) and vpopmail users. In -test7's dovecot-example.conf, there is a different format for "blocking" multiple auth types, and I created a conf as such: auth default { mechanisms = plain userdb = passwd passdb = shadow user = root count = 2 } auth vpopmail { mechanisms = plain userdb = vpopmail passdb = vpopmail user = vpopmail count = 2 } Password authentication still works fine, but I can't find a way to get it to fallback to using the vpopmail auth. Is this simply not working yet? Timo - what part of the code needs this update? Thanks. -D -- Change? We fear change.

2 6

[Dovecot] Dovecot + PostgreSQL + Postfix with SMTP AUTH HOWTO
by Timo Sirainen 17 Sep '03

17 Sep '03

Just built one and figured I'd write down what I did :) Still needing some web thingy to configure it. At least a password changer plugin for Squirrelmail. http://wiki.dovecot.fi/moin.cgi/DovecotPostgresql

3 3

[Dovecot] Unable to access the mailbox or folders !!
by nasir nasir 17 Sep '03

17 Sep '03

Hi, Thanx a lot for your reply. But my log file(its /var/log/dovecot) doesnt have any information other than the following line for example, imap-login: Sep 16 10:31:50 Info: Login: usr1 [127.0.0.1] After this when I give select command or anything like that, its not logged(I dont know also, how to enable maximum debug information, I checked the docs and all) Again, let me tell you that I suspect there is something wrong with the mail environment setting. its as follows default_mail_env = maildir:/var/spool/mail/%u/Maildir and when i give some nonexisting location ( eg; /var/blah/blah) also, I get the SAME ERROR. Here is a sample telnet session Trying 127.0.0.1... Connected to localhost.localdomain (127.0.0.1). Escape character is '^]'. * OK dovecot ready. a01 login usr1 XXXXXXXXX a01 OK Logged in. a02 select inbox a02 NO Please tell me if you would like to have any other info. Thanx again and regards, Nasirudheen --- Timo Sirainen <tss(a)iki.fi> wrote: > On Tue, 2003-09-16 at 01:35, nasir nasir wrote: > > Hi all, > > I have installed dovecot on redhat linux > with > > ldap backend. I can login using ldap account in to > my > > webmail (squirrelmail) .But when I login to the > > webmail , I cant see any inbox or anything . Just > some > > error messages like this , > > Check the log file. /var/log/mail.log usually. It > should give more > specific error message on what happened. > > > I tried to telnet to port 143. Its also similar > case. > > It allows me to login but when I give "select" > command > > , it gives error(in fact, "NO" and nothing else). > > "x select inbox" too? > > __________________________________ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com

2 1

[Dovecot] Locking foolishness
by Ian Marlier 16 Sep '03

16 Sep '03

I'm working on getting Dovecot set up on my school's mailserver, as an IMAP and POP server. Everything is going well, move over to maildir went well, and all that... The catch: When I coverted from mbox to maildir (as part of this whole process), I put the Maildir folders under user home dirs -- and the home dirs are mounted via NFS from a server. This is for reasons of space as well as simply seeming to make sense. Now I get errors in my mail.log which read: imap-login: Sep 16 00:16:24 dovecot:Info: Login: marlier [209.6.159.188] imap(marlier): Sep 16 00:16:28 dovecot:Error: file_wait_lock() failed with index file /Network/Servers/network.uphamscornercs.net/Users/marlier/Maildir/.INBOX/.im ap.index: Invalid argument It looks to me like it's a file locking problem...any thoughts on how to get around it? I've already tried the dotlock mechanism alone...without success... More information available upon request... - Ian

2 1

[Dovecot] Locking foolishness - Better info
by Ian Marlier 16 Sep '03

16 Sep '03

I realized that my last message about locking gave bad information -- or rather, very little information. Here's my setup: - Home directories and user login information are located on an Xserve running Mac OS X 10.2.6. Home directories are split between 2 different directories -- /Users and /Students. Home dirs are exported via NFS to the mail server. User login info is shared via LDAP to the mail server and to Windows machines in classrooms. - The mail server is an old beige G3 running Debian Woody (linux 2.4.20) kernel. It's completely up-to-date. Homedirs are mounted at /Network/Servers/network.uphamscornercs.net/Users and /Network/Servers/network.uphamscornercs.net/Students, in keeping with the OS X Server userdir name scheme. The only user with a shell on the server is root, other than that all user information is pulled from LDAP using PAM. Postfix is setup to deliver mail to maildir:~/Maildir, and dovecot is set to read mail from the same directory. This is working without any problem. - Clients Entourage works fine to access mailboxes -- it reads mail without a problem. However, it pops up an error message intermittently that reads "Mail could not be read: Internal Error [<datestamp>]". This message doesn't seem to interfere with reading mail, it's just an annoyance. Squirrelmail doesn't work to access mailboxes. It logs in fine, but gives the following error message in all windows that require mailbox access: "ERROR : Could not complete request. Query: <imap query string> Reason Given: Internal error [<datestamp>]" In both cases (Entourage and Squirrelmail), the Internal Error is accompanied by the following error message in the /var/log/mail.log file: "imap(marlier): Sep 16 08:40:45 dovecot:Error: /Network/Servers/network.uphamscornercs.net/Users/marlier/Maildir/.subscript ions failed with subscription file file_wait_lock(): Invalid argument" So, it looks to me like something isn't working with locking. I'm not sure whether the problem is with the NFS mount, or with dovecot, or with permissions, or something else, but I'd like to get it fixed. I love the server, and if I can get this licked I think I've got a long-term setup. Relevant sections of /usr/local/etc/dovecot.conf: -------- # Use mmap() instead of read() to read mail files. read() seems to be a bit # faster with my Linux/x86 and it's better with NFS, so that's the default. mail_read_mmaped = no # Copy mail to another folders using hard links. This is much faster than # actually copying the file. This is problematic only if something modifies # the mail in one folder but doesn't want it modified in the others. I don't # know any MUA which would modify mail files directly. IMAP protocol also # requires that the mails don't change, so it would be problematic in any case. # If you care about performance, enable it. maildir_copy_with_hardlinks = no # Check if mails' content has been changed by external programs. This slows # down things as extra stat() needs to be called for each file. If changes are # noticed, the message is treated as a new message, since IMAP protocol # specifies that existing message are immutable. maildir_check_content_changes = yes # Which locking methods to use for locking mbox. There's three available: # dotlock: Create <mailbox>.lock file. This is the oldest and most NFS-safe # solution. If you want to use /var/mail/ like directory, the users # will need write access to that directory. # fcntl : Use this if possible. Works with NFS too if lockd is used. # flock : May not exist in all systems. Doesn't work with NFS. # # You can use both fcntl and flock too; if you do the order they're declared # with is important to avoid deadlocks if other MTAs/MUAs are using both fcntl # and flock. Some operating systems don't allow using both of them # simultaneously, eg. BSDs. If dotlock is used, it's always created first. mbox_locks = dotlock # Should we create dotlock file even when we want only a read-lock? Setting # this to yes hurts the performance when the mailbox is accessed simultaneously # by multiple processes, but it's needed for reliable reading if no other # locking methods are available. mbox_read_dotlock = yes # Maximum time in seconds to wait for lock (all of them) before aborting. mbox_lock_timeout = 300 # If dotlock exists but the mailbox isn't modified in any way, override the # lock file after this many seconds. mbox_dotlock_change_timeout = 30 # umask to use for mail files and directories umask = 0077 # Drop all privileges before exec()ing the mail process. This is mostly # meant for debugging, otherwise you don't get core dumps. Note that setting # this to yes means that log file is opened as the logged in user, which # might not work. It could also be a small security risk if you use single UID # for multiple users, as the users could ptrace() each others processes then. mail_drop_priv_before_exec = no --------- Thanks in advance for any help you can give. - Ian

1 0

[Dovecot] Unable to access the mailbox or folders !!
by nasir nasir 16 Sep '03

16 Sep '03

Hi all, I have installed dovecot on redhat linux with ldap backend. I can login using ldap account in to my webmail (squirrelmail) .But when I login to the webmail , I cant see any inbox or anything . Just some error messages like this , ERROR: ERROR : Connection dropped by imap-server. Query: LIST "" "Sent" ERROR : Could not complete request. Query: SELECT "INBOX" Reason Given: I tried to telnet to port 143. Its also similar case. It allows me to login but when I give "select" command , it gives error(in fact, "NO" and nothing else). Required info, OS - Redhat 8.0 dovecot - dovecot-0.99.10-2.dag.src.rpm ( --with-ldap --with-rawlog additionally) MTA - Exim 4.14 Webmail - Squirrelmail 1.4.1-2 Location of Maildir - /var/spool/mail/USERNAME/Maildir dovecot configuration has the following line, default_mail_env = maildir:/var/spool/mail/%u/Maildir Is there anything I am missing or doing wrong ? I am sorry if this is a silly question. But I am a newbie to dovecot and did a lot of google search for this error or even additional documentation for dovecot without any success. Any suggestion or advice would be highly appreciated. Regards, Nasirudheen __________________________________ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com

2 1

[Dovecot] child 9436 (pop3) killed with signal 11
by Gunter Ohrner 15 Sep '03

15 Sep '03

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi! Suddenly since this afternoon the following happens: Sep 14 18:16:55 UnseenUniversity pop3-login: Login: gunter [127.0.0.1] Sep 14 18:16:55 UnseenUniversity pop3(gunter): Corrupted index data file / home/gunter/Mail/.imap/INBOX/.imap.index.data: Field 1 size points outside file (205408 / 205376) for record 4662 Sep 14 18:16:55 UnseenUniversity pop3(gunter): Corrupted index data file / home/gunter/Mail/.imap/INBOX/.imap.index.data: Missing location field for record 4662 Sep 14 18:16:55 UnseenUniversity dovecot: child 9436 (pop3) killed with signal 11 I thought dovecot would delete damaged index files but I get this always when checking mail for the first time, cheking mail for the second time tells me: Sep 14 18:18:43 UnseenUniversity pop3-login: Login: gunter [127.0.0.1] Sep 14 18:18:43 UnseenUniversity pop3(gunter): Corrupted binary tree file / home/gunter/Mail/.imap/INBOX/.imap.index.tree: Invalid used_file_size in header (0) but actually fetches the mail after that. So what can/should I do? Simply delete the offending index file? The dovecot version I'm using here is Debian's ii dovecot-pop3d 0.99.10-7 A secure POP3 server that supports mbox and and only it's pop3 part. Greetings, Gunter - -- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + PGP-verschlüsselte Mails bevorzugt! + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ 3) I don't sign parts of the body, even if they're still attached. -- From Terry's Rules of Book Signing (Terry Pratchett, alt.fan.pratchett) +-+-+-+-+-+-+-+-+-+-+-+-+ http://www.lspace.org +-+-+-+-+-+-+-+-+-+-+-+-+ -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQE/ZKEX0ORHvREo8l8RAnKoAJoDpKu3OprNQ0W7ZWXpj5/RcYmZFgCfWU2c s5uLQS9yQpe7LQlVDRbnlvk= =ngZu -----END PGP SIGNATURE-----

2 1

[Dovecot] Dovecot Wiki
by Timo Sirainen 14 Sep '03

14 Sep '03

I finally got around to cleaning up the MoinMoin pages out of it and added a link to it from main page. I also got dovecot.fi domain, so Dovecot pages can be accessed from http://www.dovecot.fi/ and Wiki is at http://wiki.dovecot.fi/

2 2

[Dovecot] Setting up a local shared mailbox
by Peter Clark 14 Sep '03

14 Sep '03

One: I have never set up an IMAP server before, so I thought I would ask first before blindly stumbling around. The problem I am want to solve is this: my wife and I have a "joint" email account that we both want to access (we also have our own personal accounts, but that's beside the point.) I posed the question to my local LUG, and several suggested setting up a local IMAP server so that we can both access it through KMail. Would you concur? If so, is there a tutorial or something similar that gives instructions for setting up dovecot locally? As I said, I've never set up an IMAP server before, and I'm not really sure how to go about it. (I'm running Debian Sid, so the packages are already installed, but I don't know what additional steps need to be taken.) Thanks for your help, :Peter

4 8

[Dovecot] Patch for auto-creating home directories
by David S Madole 13 Sep '03

13 Sep '03

I've created a patch that adds a feature that is helpful to my setup. If 'parent_dir_umask' is set in the configuration file, any missing directories in the home directory path are created. The home directory itself is created according to the 'umask' setting, 'parent_dir_umask' is only used for intermediate directories that might need creating. This is useful to me, as I pull user information from a PostgreSQL database. This allows a new account to be created just by populating the database. The directory gets created the first time the user logs in (by Dovecot) or mail is received (by the MTA). As the patch is of modest length, I have included it below. I hope my meager skills are not an insult to the beatiful Dovecot code base! Thanks, David *** ./src/master/mail-process.c.orig Wed Sep 10 10:14:04 2003 --- ./src/master/mail-process.c Wed Sep 10 12:16:06 2003 *************** *** 95,100 **** --- 95,136 ---- return str_c(str); } + static int create_directories(const char *directory, mode_t mask) + { + char *chunk, *slash, *path; + mode_t oldmask; + int result; + + if (mkdir(directory, 0777) == 0 || errno == EEXIST) + return TRUE; + + if (errno != ENOENT) + return FALSE; + + path = t_strdup_noconst(directory); + + oldmask = umask(mask); + + for (chunk = path; (slash = strchr(chunk, '/')); chunk = slash + 1) { + + if (slash > chunk) { + + *slash = '\0'; + result = mkdir(path, 0777); + *slash = '/'; + + if (result != 0 && errno != EEXIST) { + umask(oldmask); + return FALSE; + } + } + } + + umask(oldmask); + + return (mkdir(path, 0777) == 0 || errno == EEXIST); + } + int create_mail_process(int socket, struct ip_addr *ip, const char *executable, const char *module_dir, unsigned int process_size, int process_type, *************** *** 156,164 **** --- 192,205 ---- restrict_process_size(process_size, (unsigned int)-1); + (void)umask(set->umask); + if (*home_dir != '\0') { full_home_dir = *chroot_dir == '\0' ? home_dir : t_strconcat(chroot_dir, "/", home_dir, NULL); + if (set->parent_dir_umask != 0777 && + !create_directories(full_home_dir, set->parent_dir_umask)) + i_fatal("mkdir(%s) failed: %m", full_home_dir); if (chdir(full_home_dir) < 0) i_fatal("chdir(%s) failed: %m", full_home_dir); } *************** *** 188,194 **** env_put("MAILDIR_CHECK_CONTENT_CHANGES=1"); if (set->mail_full_filesystem_access) env_put("FULL_FILESYSTEM_ACCESS=1"); - (void)umask(set->umask); env_put(t_strconcat("MBOX_LOCKS=", set->mbox_locks, NULL)); env_put(t_strdup_printf("MBOX_LOCK_TIMEOUT=%u", --- 229,234 ---- *** ./src/master/master-settings.h.orig Wed Sep 10 12:13:45 2003 --- ./src/master/master-settings.h Wed Sep 10 12:13:47 2003 *************** *** 51,56 **** --- 51,57 ---- int mbox_read_dotlock; unsigned int mbox_lock_timeout; unsigned int mbox_dotlock_change_timeout; + unsigned int parent_dir_umask; unsigned int umask; int mail_drop_priv_before_exec; *** ./src/master/master-settings.c.orig Wed Sep 10 12:13:59 2003 --- ./src/master/master-settings.c Wed Sep 10 12:14:40 2003 *************** *** 67,72 **** --- 67,73 ---- DEF(SET_BOOL, mbox_read_dotlock), DEF(SET_INT, mbox_lock_timeout), DEF(SET_INT, mbox_dotlock_change_timeout), + DEF(SET_INT, parent_dir_umask), DEF(SET_INT, umask), DEF(SET_BOOL, mail_drop_priv_before_exec), *************** *** 180,185 **** --- 181,187 ---- MEMBER(mbox_read_dotlock) FALSE, MEMBER(mbox_lock_timeout) 300, MEMBER(mbox_dotlock_change_timeout) 30, + MEMBER(parent_dir_umask) 0777, MEMBER(umask) 0077, MEMBER(mail_drop_priv_before_exec) FALSE,

2 1

[Dovecot] Dovecot on Linux 2.6.0-test1-ac1
by Kyler Laird 12 Sep '03

12 Sep '03

I've been using Dovecot on 2.6.0-test1 for quite awhile but today I jumped ahead to test5 and it broke in the way you described. http://dovecot.procontrol.fi/list/dovecot/2003-July/001943.html I used your workaround and now everyone is back in business. Thank you for the help! (I was sweating there for a bit.) --kyler

1 0

[Dovecot] Web administration tool
by Timo Sirainen 10 Sep '03

10 Sep '03

Any suggestions for a small web based tool to manage virtual domains/users? I tried to look but didn't really find anything that didn't seem to be tightly integrated with Courier or Cyrus, and I'd rather not spend time writing yet another one of those. I would be using Postfix and Squirrelmail with LDAP or PostgreSQL. On a somewhat related thought, I've been thinking about writing some kind of performance and statistics tool which would at least show the users who are logged in and how much CPU, memory and disk I/O they're eating so that you could see what's happening when load is too high. From Dovecot side that'd be done using a plugin. I'm not sure what the client side would be.. HTML might not be enough. Java maybe. Would Flash be too evil? :)

3 2

[Dovecot] Problem with mbox files.
by David Röhr 09 Sep '03

09 Sep '03

I have trouble to get my INBOX-mbox to work properly. I have set the default_mail_env, to this.. "default_mail_env = mbox:~/mail/:INBOX=/var/mail/%u" Since my users are using thier home-dirs to store folders and old mails, and recieving them in /var/mail/username. But when logging in i get this.. Sep 9 12:25:23 angelica imap-login: Login: username [217.151.192.103] Sep 9 12:25:23 angelica imap(username): stat() failed with mbox file /var/mail/username : No such file or directory Just like the file wasn't there?! But checking.. .~ > ls -l /var/mail/username 1200 -rw-rw---- 1 username mail 1222055 Sep 9 12:16 /var/mail/username I can see that it is there, and containing mails.. It's not corrupt or anything like that. And its not a link of any kind. Why am I getting this error? And how do I solve it? I've tested to disable chroots, but get the same error... /d -- ... david röhr | o_ .. unix systems consultant | o/ /\ Solaris, AIX, HP-UX . qbranch system management | /|_, \\ and GNU/Linux Certified. www.qbranch.se / `

2 2

[Dovecot] what is the current state
by Farkas Levente 09 Sep '03

09 Sep '03

hi, what is the current state of dovecot? is it worth to upgrade now or wait for some release in the near future? -- Levente "Si vis pacem para bellum!"

4 10

[Dovecot] squirrelmail + dovecot + qmail + vpopmail error
by Warren Togami 09 Sep '03

09 Sep '03

ERROR : Could not complete request. Query: COPY 99:99 "INBOX.SPAM" Reason Given: [TRYCREATE] Mailbox doesn't exist: INBOX.SPAM Running latest stable version of squirrelmail, dovecot, qmail and vpopmail with Maildir storage in virtual users. One of my users reports seeing this yesterday, then it went away for a few hours, then early in the next day it happened again on the same account, but went away a little while after that. Any idea what could be happening here? Warren Togami warren(a)togami.com

1 0

[Dovecot] Dovecot not starting
by Antonin Karasek 07 Sep '03

07 Sep '03

Hello everybody, sorry for stupid qustion, but I have following problem: I succesfully installed Dovecot on Debian (from source). Now I want to run it. I tryed: # /usr/local/dovecot/sbin/dovecot # but nothing happened: # ps -Af | grep dove ....... ps -Af | grep dove # What is wrong? I want Dovecot to serve POP3 over SSL. Many thanks and sorry again :o)

3 4