October 2005 - dovecot

[Dovecot] ssl + dovecot + debian sid
by Novák Áron 16 Oct '05

16 Oct '05

Hi! On the unstable version of Debian I try to use Dovecot POP3-ssl server. I both tried out the debian package(1.0.alpha3-2.0.1) from the official repository and compiling from source(1.0 alpha3 version). The error is always the same: Oct 15 09:28:04 www dovecot: pop3-login: Can't set cipher list to 'all:! LOW': error:25066067:DSO support routines:DLFCN_LOAD:could not load the shared library Is it a bug of dovecot or a bug of the openssl package? My relevant libssl packages: Package: libssl0.9.8 State: installed Version: 0.9.8-3 ------- Package: libssl0.9.7 State: installed Version: 0.9.7g-5 Thanks: Aron Novak

6 8

[Dovecot] a few questions about my experience with alpha1
by Glenn Leavell 16 Oct '05

16 Oct '05

Hi all, I've just switched from 0.99.10.6 to alpha1 on a Solaris 9 system, and I have a few questions: 1) I'm using "verbose_proctitle = yes" but I don't see the special username or IP address information in the output of ps. I've used: ps -fu dovecot ps -ef | grep dovecot /usr/ucb/ps aux | grep dovecot The process table simply shows the /usr/local/sbin/dovecot, dovecot-auth, and imap-login processes. Is there something else that I need to do, or is there a special way that I should use ps? 2) After sending dovecot a HUP signal, the logs will report something like: Warning: SIGHUP received - reloading configuration And everything seems to work fine. However, *sometimes* after sending a HUP signal, logging will stop indefinitely. Has anyone else noticed anything similar? 3) We use UW in production, and I'm new to any real use of namespaces. Almost all of our clients use the root "~/Mail/" to find their folders (in $HOME/Mail/) and their INBOXes are located in $HOME/.inbox. A few people actually find their folders with the direct path Mail/foldername. So, I'm trying to configure Dovecot to work with any of these roots / prefixes: ~/Mail/ Mail/ "" (empty/blank) I'm using the namespace configuration below, and it seems to work with any of the above prefixes. However, the logging that I see makes me wonder if I'm doing it the best way. Note the attached log file. All of this output was generated with this single IMAP command: A01 LOGIN bozo mypassword Here's my configuration: **************************************************************************** # Default namespace private { separator = / prefix = location = mbox:%h/Mail/:INBOX=%h/.inbox:INDEX=%h/Mail/ inbox = yes hidden = no } # This is the standard ~/Mail/ namespace that our clients tend to use namespace private { separator = / prefix = ~/Mail/ location = mbox:%h/Mail/ hidden = yes } # This namespace is for a few folks who might actually try to # directly access "Mail/foldername" -- as if they were accessing a real # filesystem path. namespace private { separator = / prefix = Mail/ location = mbox:%h/Mail/ hidden = yes } **************************************************************************** So, is this the best way to configure the namespaces for what I'm trying to accomplish? And any pointers on how to interpret what Dovecot is working through with regard to the attached logs would be appreciated. Notice the "Sending log messages too fast, throttling.." message (again, generated from that single login command). What might be causing that? By the way, is there any real difference between the use of %h/Mail and the possible use of ~/Mail in the location fields above? Thanks very much! -- Glenn Leavell <glenn(a)usg.edu> Office of Information and Instructional Technology Board of Regents of the University System of Georgia

3 9

[Dovecot] Problem with pop3 and alpha3
by aspar＠unisa.it 16 Oct '05

16 Oct '05

Hi all, I have a problem with dovecot-alpha3 and pop3 protocol (on a tru64 5.1a...) In my Maildir/cur there are 8144 mails and if I use pop3 protocol I receive in the output 8146 line instead of 8144. The problem is that 2 mails are duplicated . The output of List command is like: 1 51265 2 261783 . . . 2987 30291 2987 30291 (duplicated line) 2988 16631 . 4601 1231 4602 8921 4602 8921 (Another duplicated line) 4603 1313 I've deleted dovecot.* and dovecot-uidlist in the Maildir path but the problem remains. Suggest? Is a bug? I've tried also to remove the first 1000 messages but the problem now is on the mail number 2635 and not 1987 like I can think. Alfonso ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.

3 2

[Dovecot] Possible bug: why is the owner of home-directory important?
by Qweb - Yavuz Aydin 16 Oct '05

16 Oct '05

Dear all, I am trying to migrate one of our systems to dovecot. We were using uw-imapd in black-box-mode before. Since the home-directory of a user is not unique per definition on our systems, we have kind of a different setup. As an example: I got a user, let's say user1. It's home directory is /local/web/websites/5850844095/www. This directory has the following permissions: # ls -la /local/web/websites/5850844095/|grep www drwxr-x--- 7 www-data g5850844095 4096 Oct 13 12:28 www (user1 is member of the group g5850844095) Why is logging in not working properly? See: # telnet localhost 143 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. * OK dovecot ready. 1 LOGIN user1 password 1 OK Logged in. Connection closed by foreign host. And in the logfile I see: Oct 13 13:09:47 s1 dovecot: chdir(/local/web/websites/5850844095/www) failed with uid 1020: Permission denied Oct 13 13:09:47 s1 dovecot: child 1527 (imap) returned error 89 However, when I change the permissions on the home-dir to 755, it works. The point is, none of my mailboxes (INBOX or others) are in my home-dir, so why does dovecot need my home-directory? I hope someone can help. PS1 the default_mail_env reads: default_mail_env = mbox:/local/mail/imap/%u/:INBOX=/local/mail/spool/%u PS2 This is on a Debian Sarge (3.1) system. -- Best regards, Yavuz Aydin Qweb Internet Services

2 2

[Dovecot] after updating to dovecot 1.0a series, nokia 9500 communicator crashes while checking imap mailboxes?
by Eero Volotinen 16 Oct '05

16 Oct '05

After updating from Dovecot 0.99.x series to Dovecot 1.0A, Nokia 9500 communicator crashes frequently while checking imap mailboxes over wlan? Any ideas? Any people with same problem? Looks like it dovecot relates since, it works with 0.99.x series. -- Eero

2 1

[Dovecot] Cyrus migration - Header version 6 not supported
by Arnaud Limbourg 16 Oct '05

16 Oct '05

Hello, I was previously running a cyrus server which I realized later on is overkill for what my needs so I would like to switch to dovecot. Unfortunately the cyrus2courier utility to migrate the mails gives me the error Header version 6 not supported I was using cyrus 2.2.3. Does anybody have any advice on how I could migrate all the mails ? Thank you. Arnaud.

2 1

[Dovecot] Need help with SQL queries after updating to 1.0a3
by Jonathan Vanasco 16 Oct '05

16 Oct '05

I upgraded to 1.0a3 - i have everything in the config migrated over, but I'm unsure about the way i should be querying postgres my db handles virtual accounts only, and is set as such: CREATE TABLE accounts ( local_part VARCHAR(64) NOT NULL, domain VARCHAR(64) NOT NULL, password VARCHAR(64) NULL, home_dir VARCHAR(256) NOT NULL, uid INTEGER DEFAULT '1003', gid INTEGER DEFAULT '1003', active CHAR(1) DEFAULT 'Y' ); so an entry would be something like: user | domain.com | md5('passwprd') | /path/to/maildir/ | 1003 | 1003 | Y I've rewritten the password query as such: password_query = SELECT local_part || '@' || domain as user, password FROM accounts WHERE local_part = '%n' AND domain = '%d' AND active = 'Y' ; but i can't get things to work with the user query user_query = SELECT home_dir AS home, uid, gid FROM accounts WHERE local_part = '%n' AND domain = '%d' ; can anyone point me in the right direction? the docs in the distribution aren't very clear, and the wiki seems to have more .9 info than 1.0 info this is what i've gotten of of auth_debug: Oct 11 11:53:37 rsrr1 dovecot: auth(default): client in: AUTH 1 PLAIN service=IMAP secured lip=66.250.131.114 rip=209.73.1.130 resp=xxxxxxxxxxxxxx Oct 11 11:53:37 rsrr1 dovecot: auth(default): sql(test(a)mydomain.com, 209.73.1.130): query: SELECT local_part || '@' || domain as user, password FROM accounts WHERE local_part = 'test' AND domain = 'mydomain.com' AND active = 'Y' ; Oct 11 11:53:37 rsrr1 dovecot: auth(default): client out: OK 1 user=test@ mydomain.com Oct 11 11:53:37 rsrr1 dovecot: auth(default): master in: REQUEST 26 93326 1 Oct 11 11:53:37 rsrr1 dovecot: auth(default): passdb(test@ mydomain.com,209.73.1.130): passdb didn't return userdb entries Oct 11 11:53:37 rsrr1 dovecot: auth(default): userdb(test@ mydomain.com,209.73.1.130): user not found from userdb Oct 11 11:53:37 rsrr1 dovecot: auth(default): master out: NOTFOUND 26 Oct 11 11:53:37 rsrr1 dovecot: imap-login: Internal login failure: user=<test@ mydomain.com>, method=PLAIN, rip=209.73.1.130, lip=66.250.131.114, TLS

2 1

[Dovecot] Dovecot versus libsafe 2.0.15
by _ 16 Oct '05

16 Oct '05

Hi, I encountered a problem using Dovecot (todays CVS, 11/10/2005) with libsafe, systemwide install. Dovecot silently dies. Here is the end of the systrace output I got: bind(6, {sin_family=AF_INET, sin_port=htons(143), sin_addr=inet_addr("0.0.0.0")}}, 16) = 0 getsockname(6, {sin_family=AF_INET, sin_port=htons(143), sin_addr=inet_addr("0.0.0.0")}}, [16]) = 0 listen(6, 8) = 0 fcntl64(0x6, 0x3, 0, 0x8072ed8) = 2 fcntl64(0x6, 0x4, 0x802, 0x8072ed8) = 0 fcntl64(0x6, 0x1, 0, 0x8072ed8) = 0 fcntl64(0x6, 0x2, 0x1, 0x8072ed8) = 0 socket(PF_INET, SOCK_STREAM, IPPROTO_IP) = 8 setsockopt(8, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 setsockopt(8, SOL_SOCKET, SO_KEEPALIVE, [1], 4) = 0 bind(8, {sin_family=AF_INET, sin_port=htons(993), sin_addr=inet_addr("0.0.0.0")}}, 16) = 0 getsockname(8, {sin_family=AF_INET, sin_port=htons(993), sin_addr=inet_addr("0.0.0.0")}}, [16]) = 0 listen(8, 8) = 0 fcntl64(0x8, 0x3, 0, 0x8072ed8) = 2 fcntl64(0x8, 0x4, 0x802, 0x8072ed8) = 0 fcntl64(0x8, 0x1, 0, 0x8072ed8) = 0 fcntl64(0x8, 0x2, 0x1, 0x8072ed8) = 0 dup2(4, 0) = 0 dup2(4, 1) = 1 dup2(4, 2) = 2 fork() = 8739 --- SIGCHLD (Child exited) --- _exit(0) = ? kind regards Sascha Warner

2 1

[Dovecot] Cannot see new messages in Inbox
by Mark Farmer 16 Oct '05

16 Oct '05

Hi, just wondering if anyone has any suggestions on this. I'm having a rather odd problem in that I cannot see new emails in my IMAP inbox, this is true for both Thunderbird & Squirrelmail. I know the mails are arriving & being delivered correctly as I see the logs for postfix & procmail, and I can also list them from a command prompt on the Linux mail server. The really odd thing is that I can see new mail in other folders within the same mailbox (maildir) without issue, it's only the inbox that seems to be exhibiting the problem. Nothing has changed on the server and all permissions look fine. The only thing I can think of is that I reinstalled my other machine with Linux the other day & setup Thunderbird as normal - I didn't have any problem at the time but yesterday I noticed the problem. I have tried stopping & restarting the dovecot service a few times but this hasn't helped. I've had this running for months now & this just seems to have cropped up, very strange. Any thoughts anyone? farmorg

2 1

[Dovecot] How to set up a passwd file for virtual hosting
by Richard Freeman 16 Oct '05

16 Oct '05

Hi, Exim4 is running fine and I am trying to set up Dovecot 0.99 to handle virtual users (http://wiki.dovecot.org/moin.cgi/VirtualhostingWithExim) so I don't have to set up user accounts for each e-mail address I want to server out via pop3. I need to create a user and passd file, a bit like /etc/passwd, but in a different location for my dovecot virtual users. I can create a blank file such as /etc/dovecot/users (beware my increasing vi skills...) but how do I add users and passwords to this? Can I just type them in and separate them with colons? If so, how would I add a password to the file? I am happy using the passwd command which alters my user passwords in /etc/passwd. Can I use it or something similar to create the passwords for the users in my new file /etc/dovecot/users ? Is there any way I can use an MD5 hash or CRYPT format for the passwords? Yours, Richard

2 1