April 2005 - dovecot - dovecot.org

[Dovecot] IMAP EXPUNGE disconnect/box hang - Fedora Core 2, Squirrelmail and Evolution
by Schettino, John Charles 22 Apr '05

22 Apr '05

I'm a bit befuddled by this behavior. I've been using dovecot for close to a year, and recently the Fedora Core 2 Update: dovecot-0.99.13-4.FC2 build came in via yum. Since then I occasionally get this EXPUNGE disconnect error. When the error hits, the box does not crash but I can no longer log in*, nor start any new processes. I happen to have gkrellm running and I see a slow but steady climb in the # of processess. The only way to recover the box is to do a hard reset, as I cannot log in, nor su - to do a shutdown. In one case I happened to have a root shell open, and I still could not do a shutdown. Any ideas as to what I should do with this? As long as I don't expung everything is fine, but when I do expunge (move something or a filter runs in squirrelmail, or Action/Expunge in Evolution) sometimes it works fine, sometimes I get this error and a weird zombie state. It was all rock solid before this new version. Suggestions welcome - I don't seem to be getting any logging when it goes bad, perhaps I can up the log level? I'm more then happy to build the current dovecot from source, and if I should post this to some Fedora list, point me at it :D

1 0

[Dovecot] IMAP EXPUNGE disconnect/box hang - Fedora Core 2, Squirrelmail and Evolution
by Schettino, John Charles 22 Apr '05

22 Apr '05

Correction: I'm running yum.log:03/07/05 05:48:28 Updated: dovecot 0.99.14-1.1.fc2.rf.i386 - Sorry about that. I'm a bit befuddled by this behavior. I've been using dovecot for close to a year, and recently the Fedora Core 2 Update: dovecot-0.99.13-4.FC2 build came in via yum. Since then I occasionally get this EXPUNGE disconnect error. When the error hits, the box does not crash but I can no longer log in*, nor start any new processes. I happen to have gkrellm running and I see a slow but steady climb in the # of processess. The only way to recover the box is to do a hard reset, as I cannot log in, nor su - to do a shutdown. In one case I happened to have a root shell open, and I still could not do a shutdown. Any ideas as to what I should do with this? As long as I don't expung everything is fine, but when I do expunge (move something or a filter runs in squirrelmail, or Action/Expunge in Evolution) sometimes it works fine, sometimes I get this error and a weird zombie state. It was all rock solid before this new version. Suggestions welcome - I don't seem to be getting any logging when it goes bad, perhaps I can up the log level? I'm more then happy to build the current dovecot from source, and if I should post this to some Fedora list, point me at it :D

1 0

Re: [Dovecot] 1.0 release
by Roger Marquis 22 Apr '05

22 Apr '05

> See http://www.dovecot.org/list/dovecot/2005-January/006144.html If anyone on this list is running 1.0 under FreeBSD inetd I'd really like to know if the syslog/ip address bug has been fixed. We're hoping to use dovecot with pop before smtp but 0.99's dovecot-auth + dovecot--inetd logs the local server's ip address instead of the remote client ip. -- Roger Marquis Roble Systems Consulting http://www.roble.com/

1 0

[Dovecot] How to setup dovecot under MACOSX?
by CHENG Gao 22 Apr '05

22 Apr '05

I have built Dovecot 1.0 test 67 under MACOSX. But I can not find any tutorial on how to setup it. Please allow me to explain my need. I want to setup a local imap server, and then import all my email from Mail.app and Gnus into it. Thus I can choose to read emails with any client. It's only a single user environment. Could anyone instruct me if there is any tutorial for Dovecot MACOSX setting? Thanks in advance.

2 1

[Dovecot] maildir creation
by Renzetti Federico 22 Apr '05

22 Apr '05

Hi all, this is my first post to the list and sorry for my english. I have a mail server based on qmail+dovecot+ldap with virtualdomains and maildir stored in /var/vmail/<DOMAIN>/<USERNAME>/Maildir. When I create a user on LDAP I don't create maildir too. So if I log-in with dovecot (143,110) I hope dovecot creates maildir for users but this is not I get: maildir are not created... dovecot.conf .... default_mail_env = maildir:/var/vmail/%d/%n/Maildir .... There is a way to create automatically maildir for users? Thanks all. -- Renzetti Federico System/Network Administrator RedHat Certified Engineer Fabaris S.r.l. Tel. +39 0765 22181 - Fax +39 0765 410100 Via G. Mameli, 90 02047 Poggio Mirteto (RI) Filiale: Viale dell'Università, 25 00185 Roma (RM) www.fabaris.it

4 3

[Dovecot] 1.0 release
by Patrick Avery 22 Apr '05

22 Apr '05

I'm dying to use the 1.0 capability to use more than one mysql user pasword database. However, I'm too chicken to use 1.0-test in a production environment. Does anyone know if there is a planned release date for 1.0? Or can anyone say how risky it is to use 1.0-test?

6 9

[Dovecot] Disable multiple POP3 logins
by Jesus Salvo Jr. 21 Apr '05

21 Apr '05

Hi, With some POP3 servers, when you login more than once, the POP3 server says "Err: multiple login". How can I achieve that with dovecot ? For example: I login to my POP account that is hosted by the ISP: $ telnet pop.x.com 110 Trying x.x.x.x... Connected to pop.x.com (x.x.x.x). Escape character is '^]'. +OK <25628.1113981451@bne022mfe> USER mb13536d +OK PASS testcase +OK LIST +OK 1 4608 . STAT +OK 1 4608 While that pop3 login is still active, I run another telnet session to login again to the same account. $ telnet pop.x.com 110 Trying x.x.x.x... Connected to pop.x.com (x.x.x.x). Escape character is '^]'. +OK <11709.1113981546@bne021mfe> USER mb13536d +OK PASS testcase -ERR multiple login Connection closed by foreign host. Thanks, John

3 2

[Dovecot] assertion failed in 1.0-stable
by Martin Preen 21 Apr '05

21 Apr '05

Hello everybody, I get the following assertion error with dovecot 1.0-stable when accessing a large folder: file istream-raw-mbox.c: line 383 (istream_raw_mbox_get_body_size): assertion failed: (rstream->body_offset != (uoff_t)-1) There is no error when using dovecot 0.99.14. Any ideas ? Martin ----------------------------------------------------------------- Martin Preen, Universitaet Freiburg, Institut fuer Informatik Georges-Koehler-Allee, Geb.52, Zi.00-006, 79110 Freiburg, Germany phone: ++49 761 203-8250 preen(a)informatik.uni-freiburg.de fax: ++49 761 203-8242 www.informatik.uni-freiburg.de

2 2

[Dovecot] message status changed from new to old on read
by Andrew Pimlott 21 Apr '05

21 Apr '05

Hi. I'm new to IMAP, but just tried uw-imapd and then dovecot in conjuction with offlineimap. I'm using Debian package version 0.99.14-1 and have my mail in mbox format. One of the first things that annoys me about both programs is that as soon as you read a mailbox over imap, the imapd changes all "new" messages to "old". It seems to have the assumption that the IMAP client is "reading" the messages, but particularly in the case of offlineimap, this assumption is not justified: I might not read the message on the client on which I've just synced, I might read it on the server or another client. So I would like dovecot to leave the mailbox alone, and leave it up to the client to write any changes to message status. Is there any option to dovecot that would accomplish this? While experimenting, I noticed that dovecot sometimes doesn't notice changes to the status made directly on the server. For example, if I create new mbox mailbox with one message (initially "new"), and access it with imap (using mutt in this example), it shows up "new" in the client. When I next access it with imap, it shows up "old", because dovecot modified the status as described above. If I then run mutt directly on the mailbox and change the status back to "new", then access it with imap, it still shows up "old". If I then remove the .imap directory containing the caches, it is back to "new". I assume that dovecot is supposed to pick up changes made directly on the server, right? Thanks for your help, Andrew

2 2

[Dovecot] minimial maildir++ quota for dovecot-0.99
by David Harris 21 Apr '05

21 Apr '05

Hello, I'm using dovecot-0.99.14, and I wonder if anyone has created patch for *minimal* Maildir++ support. By minimal Maildir++ support, I mean the following: (1) New messages created by dovecot will include the ,S=nnnnn string in the unique identifier so that Maildir++ clients don't have to stat the file to know the size. (2) Dovecot will append to the maildirsize file when a message is deleted or added. If maildirsize gets larger than the 5120 limit, then just delete it and let someone else recalculate the quota. My goal isn't full Maildir++ support in dovecot, but just to make it play nicely with my Maildir++ aware delivery agent. (If someone has full Maildir++ support, I'd be glad for that too!) If what I describe above doesn't exist, I am interested in paying someone to make this quick patch. E-mail me off list if you are interested. Thanks, David

1 0