July 2005 - dovecot - dovecot.org

[Dovecot] [PATCH, RFC] add APOP authentication mechanism
by Andrey Panin 14 Aug '17

14 Aug '17

Hello all, this patch add APOP authentication mechanism to dovecot 1.0-test23. Please take a look. Best regards. -- Andrey Panin | Linux and UNIX system administrator pazke(a)donpac.ru | PGP key: wwwkeys.pgp.net

3 2

[Dovecot] Too many open files
by Andrew Hutchings 10 Jan '08

10 Jan '08

Hi Guys, Just got this on one of my test72 dovecot servers: - Jun 10 12:40:28 svr21 dovecot: auth(default): net_connect_unix(/var/run/dovecot/auth-worker.18818) failed: Too many open files Jun 10 12:40:28 svr21 dovecot: pop3-login: Disconnected: method=PLAIN, rip=xxx.xxx.xxx.xxx, lip=xxx.xxx.xxx.xxx Jun 10 12:40:28 svr21 dovecot: pop3-login: Disconnected: method=PLAIN, rip=xxx.xxx.xxx.xxx, lip=xxx.xxx.xxx.xxx Jun 10 12:40:28 svr21 dovecot: child 18818 (auth) returned error 89 Jun 10 12:40:29 svr21 dovecot: Auth process died too early - shutting down Jun 10 12:40:29 svr21 dovecot: auth(default): mysql: Connected to localhost (maildb) Jun 10 12:40:29 svr21 dovecot: auth(default): net_connect_unix(/var/run/dovecot/auth-worker.13784) failed: No such file or directory Jun 10 12:40:29 svr21 dovecot: child 13784 (auth) returned error 89 - Is dovecot leaving files open? Or is it a large mailbox? Regards Andrew -- Andrew Hutchings (A-Wing) Linux Guru - Netserve Consultants Ltd. - http://www.domaincity.co.uk/ Admin - North Wales Linux User Group - http://www.nwlug.org.uk/ BOFH excuse 122: because Bill Gates is a Jehovah's witness and so nothing can work on St. Swithin's day.

5 5

[Dovecot] POP (dot) locks
by Christian Balzer 09 Apr '06

09 Apr '06

Hello, just to soothe my paranoia from many years of qpopper usage, which enforces solitary access to a POP mailbox. Only one login per user is possible at the same time and if a session terminates w/o qpopper being properly notified it will remain locked for some time, 30 minutes by default. With dovecot (0.99.10.4) one can login multiple times (using POP, with IMAP of course this comes as no surprise :) and thus I presume this bit from the configuration: --- # Should we create dotlock file even when we want only a read-lock? Setting # this to yes hurts the performance when the mailbox is accessed simultaneously # by multiple processes, but it's needed for reliable reading if no other # locking methods are available. #mbox_read_dotlock = no --- means that if the only other reading accesses to a (mbox style in this case here) mailbox are via other dovecot processes everything will be fine? Regards, Christian Balzer -- Christian Balzer Network/Systems Engineer NOC chibi(a)gol.com Global OnLine Japan/Fusion Network Services http://www.gol.com/

5 10

[Dovecot] Using mbox INBOX with Maildirs?
by Mark Winslow 22 Mar '06

22 Mar '06

Thanks for everybody's tips on the mbox to maildirs converter. I was unaware that Maildirs was a common format not specific to dovecot, so I was searching using a dovecot keyword. I'm having this problem now with inboxes. I want to use maildirs, but my mail is delivered to an mbox. I can't seem to get dovecot to recognize the inbox location. Is something like: maildir:%h/Maildir:INBOX=/var/mail/%u impossible to use? What I'm trying to do is slowly merge people from mboxes to maildirs, so I have to use the passwd file per user maildirs settings with some sort of recognizeable inbox. I'm using sendmail as my mail server. Do I have to tell that to put the mail in the right inbox format? Thanks. __________________________________ Discover Yahoo! Find restaurants, movies, travel and more fun for the weekend. Check it out! http://discover.yahoo.com/weekend.html

3 2

RE: [Dovecot] IMAP login name conversion
by Zoong Pham 24 Feb '06

24 Feb '06

> -----Original Message----- > From: Timo Sirainen [mailto:tss@iki.fi] > Sent: Tuesday, 1 June 2004 9:39 PM > To: Zoong Pham > Cc: dovecot(a)dovecot.org > Subject: Re: [Dovecot] IMAP login name conversion > > What passdb and userdb do you use? Unless you're authenticating from > SQL you probably have to modify the source. Let me explain: My server runs OpenBSD-3.5 and Sendmail. We host few virtual domains. Local accounts have login names in this format: login-domain_abc_xyz For example: joedirt-joedomain_com_au, info-adomain_com, info-otherdomain_com That way login accounts are unique across all the virtual domains. I use the OpenBSD pre-compiled dovecot-0.99.10p2. It is set to use "auth_passdb = passwd" and "auth_userdb = passwd" I can use mutt to access my mailbox via IMAPS with login name format joedirt-joedomain_com_au. Other users use different MUA like Outlook and prefer to login with their email addresses (joedirt(a)joedomain.com.au, info(a)adomain.com, info(a)otherdomain.com) We use squirrelmail for webmail. I modified squirrelmail to automatically convert login name from format of joedirt(a)joedomain.com.au to joedirt-joedomain_com_au. So if users use squirrelmail, they can just login with their email addresses. My question is how to achieve the same thing with other MUAs like Outlook? Do I have to modify dovecot source? Can I use LDAP or SQL instead? Note that we are using Sendmail and prefer it than othe MTA. I have looked at the Wiki, specially the "DovecotOpenLdap" but am still confused. Thanks Zoong

3 2

[Dovecot] dovecot rpms, .subscriptions file, mbox to maildir
by Saurabh Barve 07 Feb '06

07 Feb '06

Hi, I am running dovecot 0.99-14 on a Fedora Core 2 machine. I had a few questions: 1) I wanted to upgrade to the dovecot-1.0 release. However, I am not sure if that's really required. dovecot-0.99-14 has been running very well for me for quite some time. Is there a real advantage to switching to the latest release. The reason I'm asking this is because: i) I don't have too many users to server - around 15 only. ii) My mail server is a pretty fast machine (~1 GHz, 1 GB RAM) machine, so hardware isn't too much of an issue. iii) I like to install software from rpm's. It's not that I can't install from source, but installing from rpm's makes it much easier for me. Just a personal preference. The version of dovecot that I am running was obtained from Dag Wieers web site. I haven't seen a newer version there. I've googled for rpm's for newer versions, and they are available, but I don't want to install it from some third party source that I don't know/trust. iv) I am also planning to support web mail for my users (probably through Squirrelmail). Are there any advantages/disadvantages to upgrading dovecot for that? v) People use Mozilla Mail, Mail.app, Thunderbird, Outlook, and Opera. Does the 1.0 version provide better integration with different mail clients (even though I understand that sometimes it's a problem with the client implementation). So, are there newer version of dovecot (1.0-stable) available in rpm formats which are guaranteed to be safe and un-trojaned? And is there any really good reason why I should upgrade to 1.0-stable? 2) My second question is about creating the .subscriptions (or subscriptions in 1.0) file. When I moved people over from using pine to using a mail client like Evolution/Thunderbird, I had to create .subscriptions/.mailboxlist file for them so that they could see the folders that they had created in pine. However, people still sometimes access e-mail using pine. They then create new folders in pine, which they are unable to see in their mail client. Is there a way around it? This occurs especially when people check their mail at the start of the month, and pine asks about saving/deleting old sent-mail folders, Trash folders. Is there a way to add these folders automagically to the .subscriptions file? 3) Would I be able to support web mail using mailboxes in mbox format, as I have them now? Or do I have to go for Maildir format? Since our university introduced web mail, they have had two sets of folders - one with capitalization (Sent, Deleted Messages, etc.) and one without (sent-mail, etc. - these were from our pine days). Is this due to web mail? Also, if I do need to convert from mbox to Maildir, what is the standard tool for doing that? I saw at least three different tools/scripts for doing that (mbox2maildir,mb2d,mb2md-2,mb2md.pl, .. ). Which tool (and from where) should I use to convert mailboxes without problems? Any help is greatly appreciated. Thanks in advance, Saurabh. ----- sa(a)atmos.colostate.edu

5 12

[Dovecot] Dovecot, Outlook Express and new accounts
by news.gmane.org 12 Nov '05

12 Nov '05

I have come across a strange situation, involving new accounts. I am running Dovecot 0.99.10-5 on Fedora Core 2. Dovecot is configured to use pam for authentication, and the dovecot pam service is configured to use pam_mkhomedir. When an account is created and the user logs in through SquirrelMail, there is no problem. The standard folders are available - Inbox, Drafts, Sent Items and Trash. When logging in through Outlook Express first, it gives the following error:- The server did not respond to this IMAP command before the connection was terminated. Configuration: Account: mail.server Server: mail.server User name: username Protocol: IMAP Port: 143 Secure(SSL): 0 Code: 800ccc0f A packet trace shows the following:- <<< * OK dovecot ready. >>> 008E CAPABILITY <<< * CAPABILITY IMAP4rev1 SORT THREAD=REFERENCES MULTIAPPEND UNSELECT LITERAL+ IDLE CHILDREN LISTEXT LIST-SUBSCRIBED STARTTLS AUTH=PLAIN <<< 008E OK Capability completed. >>> 008F LOGIN "username" "password" <<< 008F OK Logged in. >>> 008G IDLE <<< + idling >>> DONE <<< 008G OK Idle completed. 008H LIST "" "*" Connection to host lost. My suspicion that Outlook Express is not intelligent enough to create the folders, although the sudden connection drop might indicate a bug. If it is not a bug, is there a workaround? Regards -- Chris Hills IT Services North East Worcestershire College

6 10

[Dovecot] [Fwd: Dovecot disconnecting users at login for inactivity]
by Chris Liljenstolpe 25 Oct '05

25 Oct '05

3 3

[Dovecot] verbose pop3 logging
by Ilo Lorusso 17 Oct '05

17 Oct '05

Hi Im new to dovecot and am looking for some options in the /etc/dovecot.conf to make dovecot a bit more verbose in terms pop3 usage, What ip a user is coming from? How many mails the user downloaded? Timing? Errors occurred while downloading mail?? Is this all possible with dovecot?

3 2

[Dovecot] 1.0-test75 and roadmap for v1.0
by Timo Sirainen 07 Sep '05

07 Sep '05

http://dovecot.org/test/ Keywords are finally stored in maildir filenames and listed in "dovecot-keywords" file. It should be possible to just rename 0.99.x's .customflags file to dovecot-keywords (but it can't be renamed back after modification). Also fixed another uid/sequence mixup bug with setting keywords in general (in mbox too). Fixed SHA1 checksum generation with big-endian machines (used only in passwords). I think I'll forget about the master/config rewrite for a while and leave it for Dovecot v2.0. That would mean the next release will be called 1.0-alpha1. After that there should be only bugfixes and some smaller features and optimizations left. I looked through my TODO and found the following missing features / optimizations that pretty much have to be done before v1.0. Anything important missing? - keywords: - add some limits to how many there can be - send FLAGS/PERMANENTFLAGS untagged replies when they change (required by IMAP RFC) - remove unused keywords from keyword list? (only when adding new ones) - mail cache file - cache _all_ headers that are marked to be cached when headers are being parsed, not just the ones client is requesting at that time. - compression should drop fields with last_used < (latest_mail_index_date - month) - when parsing mbox or saving message, parse the mail through index-mail so things gets saved into cache immediately - mbox - when we're updating flags with lazy writing, we're still parsing the mbox, just not writing to it! - always add empty line after mail. - make the parser require it too? syncing should make sure there always exists two LFs at end of file. raw-mbox-stream should make sure the last message ends with LF even if it doesn't exist in the file - COPY doesn't work to same mailbox (lock assert crash) - keep mbox lock for two extra seconds after sync to make sure we notice changes made by other mbox writer software - maildir - hardlink copying doesn't update indexes (does it even work?) - deliver needs quota integration somehow so it returns out-of-quota failure as fatal instead of temporary Probably after v1.0: - Full NFS support - Try to handle out-of-quota/disk space situations well

8 18