October 2007 - dovecot

[Dovecot] --enable-headers-install problem in 1.0.5
by Trever L. Adams 02 Oct '07

02 Oct '07

I am trying to get a SPEC file for an RPM to build a devel package. I have it working, except for one thing. 1.0.5 doesn't actually install the headers with that option to configure found in the subject. It does create the directory, but it doesn't put the files there. Timo, is this a known/unknown bug, or am I doing something stupid? Thanks, Trever

3 2

[Dovecot] SORT(DATE) and missing Date headers
by Kyle Wheeler 02 Oct '07

02 Oct '07

Hello, Occasionally, I get mail that's missing a Date header. The usual suspects are iTunes weekly mailings and NYTimes email-to-a-friend articles. I use qmail, which doesn't "fix" these malformed emails by adding a Date header (like Sendmail does), so when they get to my mailbox, they're just as badly formed as they were when they were sent, which is to say, they have no Date header. Unfortunately, this means that SORT (DATE) puts them at the beginning of the list---and in a mailbox with lots of old mail, that's usually the wrong spot. Now, my email clients will do some basic guesswork about when the message was sent, usually by falling back on the timestamp of the first-added Received header. So, they will display a date. But they have to then sort all messages themselves in order to get a valid sorting. Would it be possible to get Dovecot to fall back to Received header parsing whenever a message is missing a Date header? The idea is that SORT (DATE) would then become useful even in the face of commonly malformed email. How hard would this be to hack into the current Dovecot source? Does this maybe exist already (e.g. as SORT (X-DATE)? ~Kyle -- There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order. -- Ed Howdershelt

3 7

[Dovecot] Slight problem with dovecot + IMAP
by Timothy Murphy 02 Oct '07

02 Oct '07

I'm running dovecot on my desktop with kmail as IMAP client on my laptop. When I start kmail on the laptop it sometimes takes several minutes to "calm down". The number of messages listed in the IMAP inbox increases greatly - maybe from 2500 to 3000 - and then slowly decreases. There are sometimes a large number of duplicate messages, which kmail allows one to delete. I don't know if this is a kmail or dovecot problem. It is quite likely there is something wrong in my setup. Any suggestions or advice gratefully received.

2 4

[Dovecot] IMAP Fetch fails with BAD instead of NO
by Reinier Bezuidenhout 02 Oct '07

02 Oct '07

Hi, I'm running version 1.0.3 of dovecot using IMAP and using javamail to access the mail. The application I'm using (when stress testing the system by doing simultaious creation of email and deleting emails, it sometimes get into the state where the application (via javamail) ask for the UID of a message that has been expunged and deleted (no longer exists). Dovecot returns with the following error: AXXX FETCH 14 (UID) AXXX BAD Error in IMAP command FETCH: Invalid messageset This can easily be reproduced by using telnet to 143 and giving the command by hand. When I read through the source code, there were obvious comments that states the dovecot will not return NO on fetch errors, only BAD. So I assume it is done on purpose. My question is that in RFC 3501 for fetch it says: (section 6.4.5) Result: OK - fetch completed NO - fetch error: can't fetch that data BAD - command unknown or arguments invalid No I guess a UID that is out of range could be considered "arguments invalid", but shouldn't it be a soft error with NO as a result where "can't fetch that data" is more appropriate according the the RFC. The command isn't syntactically BAD, the requested data just does not exists. The same command tested against another IMAP server returns AXXX NO message not available Not that they are necessarily correct, but it just begs the question. Thanks Reinier Running on FreeBSD 6.x (x86) devmail# dovecot -n # 1.0.3: /usr/local/etc/dovecot.conf protocols: imap pop3 ssl_disable: yes disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login valid_chroot_dirs: /var/mail verbose_proctitle: yes first_valid_uid: 3000 last_valid_uid: 5000 first_valid_gid: 0 mail_extra_groups: mail mail_location: mbox:~/mail/:INBOX=/var/mail/%u mail_debug: yes maildir_copy_with_hardlinks: yes mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 imap_client_workarounds(default): delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(imap): delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(pop3): outlook-idle pop3_uidl_format(default): pop3_uidl_format(imap): pop3_uidl_format(pop3): %08Xu%08Xv pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh auth default: verbose: yes passdb: driver: ldap args: /usr/local/etc/dovecot-ldap.conf userdb: driver: ldap args: /usr/local/etc/dovecot-ldap-user.conf userdb: driver: prefetch devmail#

2 2

Re: [Dovecot] Moving email from a folder to another using IMAP isvery slow (sometimes)
by Stefano Scalise 02 Oct '07

02 Oct '07

Hi to all, very strange! I tried to debug why imap process takes 100% CPu and it is very slow when I move an email from an imap folder to another imap folder and then I typed: strace -tt -o /log-imap.txt -p <process number> well, during the trace the imap process doesn't crash and it is very fast. If I stop the tracing, I have again the problem and sometimes the crash of the process. Any help? Thank you, Stefano. ----- Original Message ----- From: "Stefano Scalise" <s.scalise(a)tno.it> To: "Timo Sirainen" <tss(a)iki.fi> Cc: <dovecot(a)dovecot.org> Sent: Monday, October 01, 2007 4:21 PM Subject: Re: [Dovecot] Moving email from a folder to another using IMAP isvery slow (sometimes) > Sorry, but with the new version (1.1.beta2), I still have the same problem > of very slowness during moving email between two imap folders. What can I > do for debugging it? > Stefano. > > ----- Original Message ----- > From: "Timo Sirainen" <tss(a)iki.fi> > To: "Stefano Scalise" <s.scalise(a)tno.it> > Cc: <dovecot(a)dovecot.org> > Sent: Sunday, September 30, 2007 1:52 PM > Subject: Re: [Dovecot] Moving email from a folder to another using IMAP > isvery slow (sometimes) > > On Wed, 2007-09-26 at 12:05 +0200, Stefano Scalise wrote: >> Update to the problem: >> >> I tried to stress the server with many moving and I received: >> >> Sep 26 10:56:40 sirio3 dovecot: IMAP(<email_address>): Trying to allocate >> 0 >> bytes > > This should fix it: http://hg.dovecot.org/dovecot/rev/c6b85cf1e63a > > I'll probably make a beta2 release today after fixing several other > things. > >

1 0

Re: [Dovecot] Dovecot do not retrieve mail from spool directory (pop3)
by jsorlowscy＠netzero.net 02 Oct '07

02 Oct '07

Hello, This is new yum installation .I guess to have it upgraded I would have to do it from sources. Slawomir _____________________________________________________________ Be your own boss today! Go to Technical School. Click here. http://3rdpartyoffers.netzero.net/TGL2211/fc/Ioyw6ijngzUEYVPPo5gAQYgMx4ihgx…

1 0

[Dovecot] plugin problem
by Lars Stavholm 02 Oct '07

02 Oct '07

I'm trying to do a rewrite of the dspam_plugin for dovecot 1.1b1. There are some API changes that warranted an update of the plugin. Also, I wanted the dspam_plugin to be able to handle pristine mails for dspam retraining, as opposed to the signature based retraining. Question: How can I retrieve the full unix path for a specific mail? The original code uses mail_get_first_header() to retrieve the signature header. I need something like mail_get_mail_file_path(&path) which I then could pass on to dspam. Is there some such function available? Thanks in advance /Lars

5 19

[Dovecot] Dovecot do not retrieve mail from spool directory (pop3)
by jsorlowscy＠netzero.net 02 Oct '07

02 Oct '07

Hello, I have Dovecot 1.0.beta8 on FC5.[root@topaz orlowscy.com] # dovecot -n log_path: /var/log/dovecot protocols: pop3 login_dir: /var/run/dovecot/login login_executable: /usr/libexec/dovecot/pop3-login default_mail_env: mbox:/tmp:INBOX:/var/spool/vmail/%d/%n:INDEX=MEMORY mail_executable: /usr/libexec/dovecot/pop3 mail_plugin_dir: /usr/lib/dovecot/pop3 auth default: verbose: yes passdb: driver: pam passdb: driver: passwd-file args: /etc/mail/passwd-dovecot userdb: driver: passwd userdb: driver: static args: uid=vmail gid=vmail home=/var/spool/vmail/%d/%n I can send and receive email by exim SMTP server. I would like to use dovecot as pop3 only server. I can send and .email and I see them delivered to /var/spool/vmail/virtualdomain/ directories. They are own by vmail user created for dovecot. Dovecot is able to authenticate but is not retrieving any emails. dovecot: Oct 01 23:19:55 Info: auth(default): pam(sorlowski@orlowscy.com,::ffff:83.14.109.98): pam_authenticate() f ailed: Error in service module dovecot: Oct 01 23:19:55 Info: auth(default): passwd(sorlowski@orlowscy.com,::ffff:83.14.109.98): unknown user dovecot: Oct 01 23:19:55 Info: pop3-login: Login: user=<sorlowski(a)orlowscy.com>, method=PLAIN, rip=::ffff:83.14.109 .98, lip=::ffff:83.14.109.98 dovecot: Oct 01 23:20:49 Info: POP3(sorlowski(a)orlowscy.com): Disconnected: Logged out top=0/0, retr=0/0, del=0/0, s ize=0 I was trying to retrieve them by Outlook express. When logged in as telnet localhost 110 after LIST commant I'm getting +OK Logged in. list +OK 0 messages: even there is file with some emails. [root@topaz log]# ls -l /var/spool/vmail/orlowscy.com/sorlowski -rw-rw---- 1 vmail vmail 5164 Oct 1 23:18 /var/spool/vmail/orlowscy.com/sorlowski Please anybody help. Regards Slawomir _____________________________________________________________ Click for free info on earning your associates degrees. http://3rdpartyoffers.netzero.net/TGL2211/fc/Ioyw6ijlTO8Ob6PMzIhmxC5HdvZZ6S…

2 1

[Dovecot] shared mailboxes question
by Cory Coager 01 Oct '07

01 Oct '07

I'm using a virtual mailbox setup. Lets say my users have mailboxes in /home/vmail/domain/%u. What I'm trying to do is setup one namespace that points to /home/vmail/domain and contains everyones mailboxes that I can subscribe to. Is this possible? I tried using a symlink to /home/vmail/domain but it doesn't work because its looking for the dotFoldername. The only way I could get this to work is by creating a symlink for each folder in every mailbox. This is way too much maintenance especially since it will dynamically change. The only other way I could get it working was to create a namespace for each user and point to /home/vmail/domain/%u/Maildir/. Then inside everyones Maildir/ create a symlink for INBOX -> . This works but I'd have to do it for each user when I'd rather just use one namespace. Is there an easier way of doing this?

4 9

[Dovecot] Opinions on preferred namespace?
by Ed W 01 Oct '07

01 Oct '07

Hi Any opinions on a preferred namespace setting for use with Dovecot? Deciding factors seem to be client support, not being too unusual, accidental ease of setup, wider character range support (eg dots in folder names?), issues when scripting imap commands? For example Outlook Express (common with our userbase) seems to assume no folderprefix when using our current Courier server and from memory I think this causes some subtle issue with Sent Items and Drafts folders until you tell it to use an INBOX. folder prefix? (can't recall the exact details right now) I notice also that Thunderbird will show all folders under "Inbox" if I have an INBOX. prefix, but shows them all in a list if there is not one. Actually I find the former quite a useful feature because I have a number of test accounts where I only want to click into the INBOX, do I can keep the list of folders closed up Any other programs exhibit any (possibly beneficial) side effects from different prefix choices? Anyone got any preferences either way? Any pros/cons in using a dot as folder separator rather than a slash? I can see some logic in using an INBOX folder prefix and a slash as the folder separator because this would then mimic the on-disk layout.. (Is this what cyrus does?) I mainly care about best support for Outlook Express / Windows Mail and Thunderbird - any opinions on most compatible settings? Cheers Ed W

1 1