May 2012 - dovecot - dovecot.org

Re: [Dovecot] Dovecot for POP3S proxying
by Gilles Albusac 09 May '12

09 May '12

Dovecot is installed but actually I just use auth module (for postfix authentication). In your dovecot.conf example, I don't see the "proxy" command ? Could you give me a few more details on the "proxy" command usage (ExtraFields/Proxy is not clear for me)? Regards -----Message d'origine----- From: David Jonas Sent: Thursday, May 03, 2012 8:04 PM To: Gilles Albusac Subject: Re: [Dovecot] Dovecot for POP3S proxying On Thu May 3 05:14:40 2012, Gilles Albusac wrote: > Dovecot is already installed in my architecture and I just would like > to know how to configure Dovecot for POP3S proxying with authentication. > > For security reasons I prefer to install as little as possible binary > (see vulnerability 2011 - remote exploit - STUNNEL). If you already have dovecot running in proxy mode it's easy to add pop3s. If not, see http://wiki2.dovecot.org/PasswordDatabase/ExtraFields/Proxy See http://wiki2.dovecot.org/Services search the page for pop3s. A simple example: ssl = yes ssl_cert = </etc/dovecot/dovecot.pem ssl_key = </etc/dovecot/dovecot.pem service pop3-login { inet_listener pop3 { port = 110 } inet_listener pop3s { port = 995 ssl = yes } } Of course there is a lot more SSL tuning that can be done: http://wiki2.dovecot.org/SSL/DovecotConfiguration > -----Message d'origine----- From: David Jonas > Sent: Wednesday, May 02, 2012 10:29 PM > To: Gilles Albusac > Cc: dovecot(a)dovecot.org > Subject: Re: [Dovecot] Dovecot for POP3S proxying > > On Wed May 2 06:41:00 2012, Gilles Albusac wrote: >> I would like to configure Dovecot for POP3S proxying all users from >> the Internet to the internal Exchange Mail Server. > > Unless I'm missing something with your request, you don't need dovecot. > Any ssl proxy can do that for you, such as stunnel > (http://www.stunnel.org/) We use the hardware ssl termination on our > load balancers for pop3s, imaps, and smtps.

3 4

[Dovecot] IMAP NOTIFY extension
by ashley willis 09 May '12

09 May '12

your work on NOTIFY was brought to my attention, and I see it hasn't been changed in two months, a week after you announced it. a few users and some mail admins have been wanting something like this for k9 mail, which I help develop. what is the current status? is it worth installing and starting work in getting k9 to support it yet? I'd offer help on your end, but I just know java and perl. c code usually confuses me (i keep meaning to learn, but...). thanks! -ashley -- Sent from my Android phone with K-9 Mail. Please excuse my brevity.

2 1

Re: [Dovecot] [exim] Exim / Dovecot and AUTH LOGIN
by Frank Elsner 08 May '12

08 May '12

On Tue, 08 May 2012 19:47:39 +0200 Jonas Eckerman wrote: > On 2012-05-08 15:22, Frank Elsner wrote: > > [About exim authenticating PLAIN and LOGIN against dovecot auth socket] > > > PLAIN Authentication works perfect, LOGIN gives > > > 2012-05-08 15:08:43 login authenticator failed for xxxxxx.tu-berlin.de [130.149.X.YY]: 435 Unable to authenticate at present: authentication socket protocol error > > This is just a guess since I'm not too good at dovecot, but could it be > that you need to set at least "auth_mechanisms = plain login" your in > dovecot config? Yeah, that was it! You made my day! --Frank Elsner

1 0

[Dovecot] [+]: Exim / Dovecot and AUTH LOGIN
by Frank Elsner 08 May '12

08 May '12

On Tue, 8 May 2012 15:22:11 +0200 Frank Elsner wrote: > > Hi to both adressed mailing lists, > > I followed the instructions in http://wiki2.dovecot.org/HowTo/EximAndDovecotSASL Forgot to mention the versions :-( exim 4.77 dovecot 2.1.6 self compiled under Fedora 14. --Frank Elsner

1 0

[Dovecot] dovecot smtp authentication with sendmail
by Hadi Salem 08 May '12

08 May '12

Hi, It’s possible to use sasl dovecot smtp authentication with sendmail ? Hadi.Salem

4 3

[Dovecot] Exim / Dovecot and AUTH LOGIN
by Frank Elsner 08 May '12

08 May '12

Hi to both adressed mailing lists, I followed the instructions in http://wiki2.dovecot.org/HowTo/EximAndDovecotSASL exim.conf: | plain: | driver = dovecot | public_name = PLAIN | server_socket = /var/run/dovecot/auth-client | server_set_id = $auth1 | | login: | driver = dovecot | public_name = LOGIN | server_socket = /var/run/dovecot/auth-client | server_set_id = $auth1 10-master.conf for dovecot: | service auth { | # auth_socket_path points to this userdb socket by default. It's typically | # used by dovecot-lda, doveadm, possibly imap process, etc. Its default | # permissions make it readable only by root, but you may need to relax these | # permissions. Users that have access to this socket are able to get a list | # of all usernames and get results of everyone's userdb lookups. | # unix_listener auth-userdb { | #mode = 0600 | #user = | #group = | # } | | # Exim SMTP AUTH | unix_listener auth-client { | mode = 0660 | user = exim | group = exim | } PLAIN Authentication works perfect, LOGIN gives 2012-05-08 15:08:43 login authenticator failed for xxxxxx.tu-berlin.de [130.149.X.YY]: 435 Unable to authenticate at present: authentication socket protocol error Where is the problem? Kind regards, Frank Elsner

1 0

Re: [Dovecot] Shared namespace
by Daniel L. Miller 08 May '12

08 May '12

On 5/7/2012 6:46 AM, Daniel L. Miller wrote: > On 5/6/2012 8:34 PM, Daniel L. Miller wrote: >> I'm not sure what's triggered it - I THINK it has something to do >> with a force-resync, but not sure. >> >> I'm no longer viewing my full list of shared mailboxes. I used to >> have a number of users shown - they had all had their ACL's set >> individually and were shown in the list. "doveadm acl debug" shows >> they SHOULD be shown - at least I think so, as the output for the >> mailboxes that DO appear is identical for those that don't. >> >> Where should I look for breakage? > > After upgrading to 2.1.6 - mailboxes are back. Not sure I want to TRY > to break it again... > Ok - I broke it again. Tried changing mail_shared_explicit_inbox to no - problem mailboxes disappeared again. Changed back to yes - they came back. Problem with both Thunderbird and Roundcube as clients. -- Daniel

2 9

[Dovecot] courier to dovecot
by Grafibit Rendszergazda 08 May '12

08 May '12

Dear All, I know there were many threads on this topic. I was searching the archive and the net also, but did not find a solution on my problem. I hope you can help me. I am migrating from an old server using courier to a new server with dovecot and i can not manage to have the same uids after the migration. After copying the message files from the old server to the new, and executing the script from the wiki page the messages are still re-downloaded by the mail clients. After telnet and logging in to the old server port 110, I got the following on the command *uidl*: 1 UID377-1278276092 2 UID387-1278276092 3 UID394-1278276092 4 UID498-1278276092 5 UID499-1278276092 6 UID564-1278276092 On the new server i set up the *pop3_uidl_format = UID%u-%v* because it seems for me that the old server is using the same uidl format. Either if i execute the /./courier-dovecot-migrate.pl --to-dovecot --recursive --convert /command or i don't the uidls on the new server won't be the same. Both the %u and %v numbers are differ. Please give me any hints how to continue the investigation to have a successful migration. Thank you in advance, Tamás * dovecot -n* # 1.2.15: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-0.bpo.2-amd64 x86_64 Debian 6.0.4 protocols: imap imaps pop3 pop3s managesieve ssl_cert_file: /var/lib/dtc/etc/ssl/dovecot/new.cert.cert ssl_key_file: /var/lib/dtc/etc/ssl/dovecot/new.cert.key disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login login_executable(managesieve): /usr/lib/dovecot/managesieve-login mail_location: maildir:%h/Maildir mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_executable(managesieve): /usr/lib/dovecot/managesieve mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(pop3): quota mail_plugins(managesieve): mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 mail_plugin_dir(managesieve): /usr/lib/dovecot/modules/managesieve pop3_uidl_format: UID%u-%v managesieve_logout_format(default): bytes=%i/%o managesieve_logout_format(imap): bytes=%i/%o managesieve_logout_format(pop3): bytes=%i/%o managesieve_logout_format(managesieve): bytes ( in=%i : out=%o ) namespace: type: private separator: . prefix: INBOX. inbox: yes list: yes subscriptions: yes lda: postmaster_address: mail(a)exemple.com mail_plugin_dir: /usr/lib/dovecot/modules/lda auth_socket_path: /var/run/dovecot-auth-master log_path: /var/log/sieve.log info_log_path: /var/log/sieve.info mail_plugins: sieve quota auth default: passdb: driver: sql args: /var/lib/dtc/etc/dovecot-mysql.conf userdb: driver: prefetch userdb: driver: sql args: /var/lib/dtc/etc/dovecot-mysql.conf socket: type: listen client: path: /var/run/dovecot/dovecot-auth-client mode: 438 master: path: /var/run/dovecot-auth-master mode: 384 user: dtc plugin: sieve: ~/.dovecot.sieve sieve_dir: ~/sieve quota: maildir

3 3

Re: [Dovecot] Upgrading known problems (2.0 to 2.1) ?
by Timo Sirainen 08 May '12

08 May '12

Yes, that's possible. The IMAP/POP3 servers behind Dovecot director wouldn't even need to be Dovecots at all. Although you really want to use v2.1 director since it has a lot of fixes compared to v2.0. On 8.5.2012, at 0.02, Jean Michel wrote: > Thanks, an other thing is that I didnt saw anything about a cenario like this, its possible to have a director working on 2.0 and a backend with 2.1 simultaneously and vice-versa? > > 2012/5/7 Timo Sirainen <tss(a)iki.fi> > On 7.5.2012, at 23.21, Jean Michel wrote: > > > Is there any known/possible problem while upgrading from dovecot 2.0 to 2.1 > > ? > > Did anybody had any trouble with this ? > > http://wiki2.dovecot.org/Upgrading/2.1 lists all known problems. > > > > > -- > ------------------------------ > Jean Michel Feltrin >

1 0

[Dovecot] Upgrading known problems (2.0 to 2.1) ?
by Jean Michel 07 May '12

07 May '12

Is there any known/possible problem while upgrading from dovecot 2.0 to 2.1 ? Did anybody had any trouble with this ? ------------------------------ Jean Michel Feltrin

2 1