May 2012 - dovecot - dovecot.org

Re: [Dovecot] mdbox packing
by Daniel L. Miller 07 May '12

07 May '12

On 5/6/2012 8:09 PM, Daniel L. Miller wrote: > On 4/30/2012 5:23 PM, Timo Sirainen wrote: >> On Mon, 2012-04-30 at 12:43 -0700, Daniel L. Miller wrote: >>> Is there a way to manually force an mdbox storage to be rebuilt into >>> new >>> files? Particularly files of the maximum size? >> You could do it with dsync. >> >> > dsync seems to do a marvelous job - new question.? > > Given a mailbox with a larger number of older mails - assuming any new > mails will have later dates - will the new mail storage files be > identical? I'm probably not saying the right - let me try this: > > 1. "dsync backup mdbox" (with appropriate args) is run for a given user. > 2. "dsync mirror mdbox" is done just to catch up. > 3. Old mailstore moved off. > 4. New mailstore moved to active location. > > I'm sure there's a safer way to do the above - but I've got a > low-traffic site and I can just shut down mail service altogether for > a few minutes if I want during this. > > Now - repeat the above four steps. Will mail files m.1 through > m.(n-1) be identical to the last run? Is this a valid packing > strategy prior to performing an rsync type backup - assuming no > changes are being made to the archived mails between pack runs? Given the above, and SIS - if the backup is performed in the same spool, i.e. original is /var/mail/domain/user, backup is /var/mail/domain/user-new - will this result in any problems with SIS? If after the pack and rename operation, the old mail tree is simply deleted - will that leave SIS files unreferenced if the user later deletes the messages from their active store? -- Daniel

1 0

[Dovecot] mdbox packing
by Daniel L. Miller 07 May '12

07 May '12

Is there a way to manually force an mdbox storage to be rebuilt into new files? Particularly files of the maximum size? -- Daniel

3 3

[Dovecot] Authentication process holding open filehandles
by George Barnett 07 May '12

07 May '12

Hi, We're using dovecot to provide pop3 for a number of mailboxes. The setup is pretty simple: Each user / domain has a mailstore in /data/mailstore/<domain>/<user>/Maildir (backed by NFS). Passwords are in simple passwd-file format in the top level domain directory eg: # cat /data/mailstore/foo.com/.passwd user:{plain}password The passdb setup looks like this. passdb { args = username_format=%n /data/mailstore/%d/.passwd driver = passwd-file } The problem we're having is that when we want to remove a domain from the system and we go to rm -rf /data/mailstore/<domain>/ we are unable to because the auth process is still holding onto the file handles for the password file. Can somebody suggest an alternative pattern that I could use for storing password files? Ideally, we'd avoid one large file to prevent locking issues and would also keep the passwd-file setup since it's simple. It would be possible to have the password files in a separate dir, but over time I'm guessing that would lead to nfs turds? Easy to clean up I suppose, but maybe there's a simpler solution I'm missing? George

2 1

[Dovecot] smtp -auth with using clear text password
by Agnello George 06 May '12

06 May '12

Hi I am setting up a mailserver .. where clients need to authenticate to the mail server . The mta i am using is postfix . It is possible to use a file like this : ---------------------------------- cat /etc/postfix/dovecote_passwd agnello:123456 --------------------------------- where user is agnello and password is 123456 If you can please send me some reference links thanks a ton -- Regards Agnello D'souza

5 9

Re: [Dovecot] IMAP STARTTLS Problem
by Patrick Ben Koetter 06 May '12

06 May '12

* markus(a)opsys.de <markus(a)opsys.de>: > Am 05.05.2012 22:44, schrieb Patrick Ben Koetter: > >* Markus Fritz <markus.fritz(a)opsys.de>: > >>Am 05.05.2012 21:06, schrieb Markus Fritz: > >Assuming your server cert is located in > >/etc/ssl/certs/ca-certificates.crt try > >this on your server: > > > >openssl s_client -starttls imap -CAfile > >/etc/ssl/certs/ca-certificates.crt -connect localhost:143 > > > >Use "2 logout" to get out of the session. > > > >If it works, try the same from your client host. > > > >Does it work both times? > > yes: > > Verify return code: 0 (ok) > --- > . OK Capability completed. > > it works. But I cannot login with Thunderbird. I imported the cert > in Thunderbird, too. IIRC it is not enough to import the cert. You also need to set a policy i.e. allow the cert to be used for e-mail. p@rick -- state of mind () http://www.state-of-mind.de Franziskanerstraße 15 Telefon +49 89 3090 4664 81669 München Telefax +49 89 3090 4666 Amtsgericht München Partnerschaftsregister PR 563

1 0

[Dovecot] HG 3d8a25a4394d Patch breaks UserDB Lookups
by Thomas Leuxner 06 May '12

06 May '12

Patch http://hg.dovecot.org/dovecot-2.1/rev/3d8a25a4394d breaks auth May 5 09:01:52 spectre dovecot: lmtp(24442): Connect from local May 5 09:01:52 spectre dovecot: lmtp(24442): Error: userdb lookup(tlx(a)leuxner.net): Disconnected unexpectedly May 5 09:01:52 spectre dovecot: auth: Fatal: master: service(auth): child 24443 killed with signal 11 (core not dumped) May 5 09:01:52 spectre dovecot: lmtp(24442): Disconnect from local: Client quit (in reset) Regards Thomas

2 2

[Dovecot] IMAP STARTTLS Problem
by Markus Fritz 05 May '12

05 May '12

Hello, I have this problem: May 5 21:02:35 opsys dovecot: imap-login: Disconnected (no auth attempts): rip=84.150.52.31, lip=78.46.216.126 Connecting via Thunderbird to STARTTLS won't work, but with a website from the same server it works for tls://opsys.de. So why is the port closed for external ip's? IPTABLES entry for imap is this: fail2ban-dovecot-pop3imap tcp -- anywhere anywhere multiport dports pop3,pop3s,imap2,imaps Key files are correct TLS is working from localhost. System is Debian squeeze -- Markus Fritz Administration opsys.de

3 4

[Dovecot] Corrupted mdbox file
by Daniel L. Miller 05 May '12

05 May '12

With an error like this: doveadm(dmiller(a)amfes.com): Error: Corrupted dbox file /var/mail/amfes.com/dmiller/mdbox/storage/m.20 (around offset=74408): Unexpected EOF while reading metadata header What can be done? -- Daniel

2 1

[Dovecot] Dovecot/doveadm crash
by Daniel L. Miller 05 May '12

05 May '12

Having a problem with a mailbox. I've been trying to rebuild - but doveadm force-resync crashes. This is mdbox with sis. doveadm purge -u dmiller(a)amfes.com doveadm(dmiller(a)amfes.com): Panic: file istream.c: line 466 (i_stream_grow_buffer): assertion failed: (stream->max_buffer_size > 0) doveadm(dmiller(a)amfes.com): Error: Raw backtrace: /usr/local/lib/dovecot/libdovecot.so.0(+0x4167a) [0x7fb73465467a] -> /usr/local/lib/dovecot/libdovecot.so.0(default_fatal_handler+0x32) [0x7fb734654762] -> /usr/local/lib/dovecot/libdovecot.so.0(i_fatal+0) [0x7fb73462c2a0] -> /usr/local/lib/dovecot/libdovecot.so.0(+0x4949b) [0x7fb73465c49b] -> /usr/local/lib/dovecot/libdovecot.so.0(i_stream_get_buffer_space+0x82) [0x7fb73465c522] -> /usr/local/lib/dovecot/libdovecot.so.0(+0x4b1c8) [0x7fb73465e1c8] -> /usr/local/lib/dovecot/libdovecot.so.0(i_stream_read+0x69) [0x7fb73465bb69] -> /usr/local/lib/dovecot/libdovecot.so.0(i_stream_read_next_line+0x1d) [0x7fb73465c04d] -> /usr/local/lib/dovecot/libdovecot-storage.so.0(mdbox_purge+0x921) [0x7fb7348d7d71] -> doveadm() [0x40e1e6] -> doveadm() [0x40e018] -> doveadm() [0x40ea83] -> doveadm(doveadm_mail_try_run+0x141) [0x40eef1] -> doveadm(main+0x3c1) [0x415911] -> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xff) [0x7fb73429deff] -> doveadm() [0x40de39] -- Daniel

2 2

[Dovecot] per user sieve after filters
by Andre Rodier 05 May '12

05 May '12

Hello, Thanks for dovecot, as it's still the best mail server. I'd like to use per users sieve_after scripts. Can I put in my dovecot config file, something like that: sieve_after = %h/Mails/Sieve/After/ It would be very useful for me, as I'd like to add vacation script to be executed from this place. Kind regards, André.

2 3