February 2016 - dovecot

Found bug in quota-status + patch
by Thierry Coppey 03 Mar '16

03 Mar '16

Hello, I've found a bug in the quota-status util (Dovecot 2.2.21, and probably below): it always return OK (sufficient quota) because it fails to load the user properly. More specifically, the branch " if (quser == NULL) return 1; " in src/plugins/quota/quota-status.c:59 is always taken. (at least with postgresql backend, test your config with the (adapted) command below: printf "recipient=mailbox(a)example.com\nsize=10000000000\n\n" | nc inet:mailstore.example.com 12340 it should reject, unless you have no quota, or more than 10G). Therefore it is pointless to configure the quota-status service as described in http://wiki2.dovecot.org/Quota because of that bug: the mail would be always accepted from the client and rejected at the end of the (Postfix) processing by lda. It is possible to reject directly at SMTP level when the mailbox is full using Postfix and main.cf: smtpd_recipient_restrictions = ... reject_unauth_destination, ... check_policy_service inet:mailstore.example.com:12340 smtpd_end_of_data_restrictions = check_policy_service inet:mailstore.example.com:12340 However there remain a *small inconsistency* as lda will count the size of message including headers whereas smtpd_end_of_data_restrictions seems not to count them towards the message size (or additional headers might be added by other preprocessing e.g. antispam etc...) I propose the patch below to fix quota-status. Could an expert double-check that it doesn't have memory leaks? (it shouldn't but I'm not yet comfortable enough with Dovecot memory management). Best regards, Thierry C.

3 3

Deleting / Removing users
by John Krug 03 Mar '16

03 Mar '16

i have a list of users that I’ve removed from LDAP and I want to delete their mail storage. sdbox Dovecot 2.2.15.8 I have mail messages in one location and indexes in another. Should I just rm -rf /messages/<username> rm -rf /indexes/<username> Thanks, JK ----------------------------------------------------------------------- John "JK" Krug System Administrator The University of Chicago | Laboratory Schools 1362 East 59th Street | Chicago, IL 60637 Phone: (773) 834-4476 jk(a)ucls.uchicago.edu <mailto:jkallo@ucls.uchicago.edu> | http://helpdesk.ucls.uchicago.edu _______________________________________________

2 3

Get mailbox from its guid through IMAP
by Peter Chiochetti 02 Mar '16

02 Mar '16

In the shell I'do: doveadm fetch -u bob mailbox mailbox-guid $box uid 1 Is there a way through IMAP to get the same? -- peter

2 1

Setup changes 1.x to 2.x -- custom POP3 account handling required.
by Andrew McGlashan 01 Mar '16

01 Mar '16

Hi, Previously I did /special/ processing for some email accounts; if a particular file existed in the user's home directory, then I caused the account to use /var/mail/$USER file for POP -- otherwise it used IMAP. Now, because I adjusted the setup for POP only, IMAP still worked perfectly well. Some users have both POP and IMAP access for various reasons. The special POP processing was done using a shell script [1] in place of: /usr/lib/dovecot/pop3 - which in turn called the normal binary once setting up the environment. Now, I have been forced to upgrade my Debian from squeeze-lts to wheezy and the dovecot setup is quite different. How can I implement my /wrapper/ script for POP handling now? Here is my current setup with dovecot -n ... # 2.1.7: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-xen-amd64 x86_64 Debian 7.9 mail_location = maildir:~/Maildir namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Items" { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { driver = pam } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } protocols = " imap pop3" service imap-login { inet_listener imap { port = 0 } } service pop3-login { inet_listener pop3 { port = 0 } } ssl = required ssl_cert = </etc/exim4/exim.crt ssl_key = </etc/exim4/exim.key userdb { driver = passwd } [1] This is the content of the original wrapper script: #!/bin/sh if [ -f $HOME/.use-mbox-for-pop3s ]; then export MAIL=mbox:$HOME/mail:INBOX=/var/mail/$USER export USER_INBOX=/var/mail/$USER if [ -f $USER_INBOX ] then export USER_INBOX_GROUP=$(stat -c %G $USER_INBOX) if [ $USER_INBOX_GROUP != $USER ] then ( date ls -l $USER_INBOX chown Debian-exim:$USER $USER_INBOX ls -l $USER_INBOX ) >> /var/log/usr-lib-dovecot--pop3-affinity.log fi fi else if [ -d $HOME/Maildir ]; then export MAIL=Maildir:$HOME/Maildir else export MAIL=mbox:$HOME/mail:INBOX=/var/mail/$USER fi fi # Finally execute the imap/pop3. If you use both, you'll need two scripts. # - this customization just for POP3S ... exec /usr/lib/dovecot/pop3 Thanks AndrewM

2 2

dsync issues due to Prefix difference?
by Mark Little 01 Mar '16

01 Mar '16

Hi everyone, I'm hoping I am just missing something obvious - but I cannot seem to get a one-way migration dsync working between two Dovecot servers because the Prefix configuration is different. I am doing a migration from our old Dovecot servers to some new cPanel based ones. Source: 2.2.15 Dest: 2.2.21 Here is the debug output for the sync: doveadm(root): Debug: Loading modules from directory: /usr/lib/dovecot/modules/doveadm doveadm(root): Debug: Module loaded: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_sieve_plugin.so doveadm(testuser(a)example.ca): Debug: Effective uid=1322, gid=1322, home=/khstor3/khmail-mailboxes/l/li/example.ca/testuser doveadm(testuser(a)example.ca): Debug: Namespace inbox: type=private, prefix=, sep=, inbox=yes, hidden=no, list=yes, subscriptions=yes location=maildir:~/Maildir doveadm(testuser(a)example.ca): Debug: maildir++: root=/khstor3/khmail-mailboxes/l/li/example.ca/testuser/Maildir, index=, indexpvt=, control=, inbox=/khstor3/khmail-mailboxes/l/li/example.ca/testuser/Maildir, alt= doveadm(testuser(a)example.ca): Debug: Namespace : Using permissions from /khstor3/khmail-mailboxes/l/li/example.ca/testuser/Maildir: mode=0777 gid=default stdin: is not a tty dsync-local(testuser(a)example.ca): Debug: brain M: Local mailbox tree: INBOX guid=f055ac07d79cad508a7a000075e38adc uid_validity=1353555159 uid_next=2085 subs=no last_change=0 last_subs=0 dsync-local(testuser(a)example.ca): Debug: brain M: Local mailbox tree: Junk guid=703a8b1d51ceab56f91e0000667eee40 uid_validity=1391566942 uid_next=1 subs=yes last_change=0 last_subs=1454100049 dsync-local(testuser(a)example.ca): Debug: brain M: Local mailbox tree: Trash guid=9bee9f0f2aacb65039260000b171e44d uid_validity=1353555163 uid_next=25 subs=no last_change=0 last_subs=0 dsync-local(testuser(a)example.ca): Debug: brain M: Local mailbox tree: Drafts guid=4d03661058a0f1524f240000e9d81ad0 uid_validity=1391566936 uid_next=1 subs=no last_change=0 last_subs=0 dsync-local(testuser(a)example.ca): Debug: brain M: Local mailbox tree: Sent guid=99ee9f0f2aacb65039260000b171e44d uid_validity=1353555161 uid_next=4 subs=no last_change=0 last_subs=0 dsync-local(testuser(a)example.ca): Debug: brain M: Remote mailbox tree: INBOX guid=6460141741cfab5643470000afb0d608 uid_validity=1454100291 uid_next=2064 subs=no last_change=0 last_subs=0 dsync-local(testuser(a)example.ca): Debug: brain M: Remote mailbox tree: INBOX.Trash guid=6360141741cfab5643470000afb0d608 uid_validity=1454100290 uid_next=12 subs=yes last_change=0 last_subs=1454100289 dsync-local(testuser(a)example.ca): Debug: brain M: Remote mailbox tree: INBOX.Sent guid=6260141741cfab5643470000afb0d608 uid_validity=1454100289 uid_next=2 subs=yes last_change=0 last_subs=1454100289 dsync-remote(testuser(a)example.ca): Error: Couldn't find namespace for mailbox Junk I believe the problem is because on the source we have no prefix set, but on the destination it has INBOX as the prefix. I need to use dsync because we have many POP3 clients so I need to ensure the UIDL's are copied correctly. Here is the output from 'doveconf namespace': Source: namespace inbox { disabled = no hidden = no ignore_on_failure = no inbox = yes list = yes location = mailbox Drafts { auto = subscribe driver = special_use = \Drafts } mailbox Junk { auto = subscribe driver = special_use = \Junk } mailbox Sent { auto = subscribe driver = special_use = \Sent } mailbox "Sent Messages" { auto = no driver = special_use = \Sent } mailbox Trash { auto = subscribe driver = special_use = \Trash } order = 0 prefix = separator = subscriptions = yes type = private } Destination: namespace { disabled = no hidden = no ignore_on_failure = no inbox = yes list = yes location = mailbox Archive { auto = create autoexpunge = 0 comment = driver = special_use = \Archive } mailbox Archives { auto = no autoexpunge = 0 comment = driver = special_use = \Archive } mailbox Drafts { auto = subscribe autoexpunge = 0 comment = driver = special_use = \Drafts } mailbox Junk { auto = create autoexpunge = 0 comment = driver = special_use = \Junk } mailbox Sent { auto = subscribe autoexpunge = 0 comment = driver = special_use = \Sent } mailbox "Sent Messages" { auto = no autoexpunge = 0 comment = driver = special_use = \Sent } mailbox Trash { auto = subscribe autoexpunge = 0 comment = driver = special_use = \Trash } order = 0 prefix = INBOX. separator = subscriptions = yes type = private } If anyone could provide some assistance it would be greatly appreciated! Thanks, Mark

2 6

where is pop3_migration_ignore_missing_uidls=yes set?
by Leon Kyneur 01 Mar '16

01 Mar '16

While doing pop3 migrations with dsync I am getting an error: dsync(user(a)domain.net): Error: pop3_migration: 2 POP3 messages have no matching IMAP messages (first POP3 msg 2638 UIDL fb3d6f3299541e695a28585f5803ed1c) - set pop3_migration_ignore_missing_uidls=yes to continue anyway dsync(user(a)domain.net): Error: Exporting mailbox INBOX failed: Can't lookup pop3-uidl for UID=3252: POP3 UIDLs couldn't be synced Can't see this is doveconf -a so it's not a setting? - tried configuring it as a plugin setting but that didn't work... Where is the correct place to set this? TIA

2 1

Alternative storage backend for Dovecot
by Oleksandr Natalenko 01 Mar '16

01 Mar '16

Hi. We have corporate Dovecot setup with GlusterFS as file storage. We store maildirs on GlueterFS share, mounting it via NFS. Mounting share via native GlusterFS FUSE client introduces visible performance overhead. Also, NFS mount does not provide us with HA. That's why I have an idea to use GlusterFS C API to access maildirs share. I'd like to preserve maildir structure, but get access to it not via FS mount point but with GlusterFS C API calls. I've discovered that Dovecot source tree has src/lib-fs infrastructure with fs-posix implemented on top of it. Is that the right place to start from? GlusterFS C API calls are POSIX-like, so they could be easily used as substitutions for VFS ops. Could such a backend be implemented as separate plugin? Are there any examples of alternative storage backend to look at? Thanks. Regards, Oleksandr.

2 1

search problem dovecot 2.2.21 + fts - Solr
by Anderson Barbosa 01 Mar '16

01 Mar '16

Hello, Realized update dovecot on my server. Now the search is returning differently from the previous version bringing reference information of other messages . For example when doing a search for anderson.joao this new version of the dovecot dovecot 2.2.21 + fts - Solr response will be all email that has the word anderson and joao, instead of returning only items with the word anderson.joao. Before used version 2.2.18 + dovecot fts - Solr and the problem did not occur . For example practical test : Dovecot 2.2.18 # telnet SERVER 143 Trying SERVER... Connected to SERVER. Escape character is '^]'. * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE AUTH=PLAIN] Zimbra IMAP4. a login conta(a)conta.com.br 1223456 a OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS THREAD=ORDEREDSUBJECT MULTIAPPEND URL-PARTIAn a select INBOX * FLAGS (\Answered \Flagged \Deleted \Seen \Draft) * OK [PERMANENTFLAGS (\Answered \Flagged \Deleted \Seen \Draft \*)] Flags permitted. * 14 EXISTS * 0 RECENT * OK [UIDVALIDITY 1452548222] UIDs valid * OK [UIDNEXT 25] Predicted next UID * OK [HIGHESTMODSEQ 52] Highest a OK [READ-WRITE] Select completed (0.001 secs). a SEARCH text "anderson" * SEARCH 11 12 (2 found emails) a OK Search completed (0.265 secs). a SEARCH text "joao" * SEARCH 13 14 (2 found emails) a OK Search completed (0.003 secs). a SEARCH text "anderson.joao" * SEARCH (0 found emails) a OK Search completed (0.004 secs). a logout * BYE Logging out a OK Logout completed. Connection closed by foreign host. Dovecot 2.2.21 # telnet SERVER 143 Trying SERVER... Connected to SERVER. Escape character is '^]'. * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE AUTH=PLAIN] Zimbra IMAP4. a login conta(a)conta.com.br 1223456 a OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS THREAD=ORDEREDSUBJECT MULTIAPPEND URL-PARTIAn a select INBOX * FLAGS (\Answered \Flagged \Deleted \Seen \Draft) * OK [PERMANENTFLAGS (\Answered \Flagged \Deleted \Seen \Draft \*)] Flags permitted. * 14 EXISTS * 0 RECENT * OK [UIDVALIDITY 1452548222] UIDs valid * OK [UIDNEXT 25] Predicted next UID * OK [HIGHESTMODSEQ 52] Highest a OK [READ-WRITE] Select completed (0.000 + 0.000 secs). a SEARCH text "anderson" * SEARCH 11 12 (2 found emails) a OK Search completed (0.004 + 0.000 secs). a SEARCH text "joao" (2 found emails) * SEARCH 13 14 a OK Search completed (0.005 + 0.000 secs). a SEARCH text "anderson.joao" * SEARCH 11 12 13 14 *(4 found emails)* a OK Search completed (0.005 + 0.000 secs). a logout * BYE Logging out a OK Logout completed. Connection closed by foreign host. Even using characters Special "" \ scape, ' ' for an answer will always be all emails with the word anderson and joao. Checking the Changelog dovecot noticed que NAS versions Previous v2.2.20 and v2.2.19 certain changes with respect to fts . There Have Another way to Make Search for Exact Word In this new version to loft? -- Anderson Barbosa dos Santos Em todo o universo, nada existe de mais parecido com Deus que o silêncio. "Johanes Eckhart"

3 3

Inconsistent mdbox index while running doveadm altmove
by Ricardo Machini Barbosa 01 Mar '16

01 Mar '16

Hello, I was performing doveadm altmove for one account while this mailbox was being accessed. Dovecot version: 2.2.21 Mailbox format: mdbox Command: doveadm altmove -u user1(a)domain.com.br before 360d This command took about 5 minutes to finish and during the execution I found some log messages: Feb 25 19:57:51 dovecot: imap(user1(a)domain.com.br): Error: mdbox map /var/mail/user1/mdbox/storage/dovecot.map.index corrupted: Unexpectedly lost INBOX uid=77 map_uid=76 Feb 25 19:57:51 dovecot: imap(user1(a)domain.com.br): Internal error occurred. Refer to server log for more information. [2016-02-25 19:57:51] in=4798 out=1361819 deleted=0 expunged=0 trashed=0 Feb 25 19:57:51 dovecot: imap(user1(a)domain.com.br): Warning: fscking index file /var/mail/user1/mdbox/storage/dovecot.map.index Feb 25 19:58:15 dovecot: imap(user1(a)domain.com.br): Error: /var/mail/user1/mdbox/mailboxes/INBOX/dbox-Mails/dovecot.index reset, view is now inconsistent Feb 25 19:58:20 dovecot: imap(user1(a)domain.com.br): Error: /var/mail/user1/mdbox/mailboxes/Rascunhos/dbox-Mails/dovecot.index reset, view is now inconsistent After that these messages moved to alternate storage disappeared from the mailbox/IMAP but these files were all on alternative storage. I had to execute doveadm force-resync -u user1(a)domain.com.br INBOX to recovery this mailbox, but losing all e-mail's flags. I should do some kind of lock before running the command altmove ? Regards, Ricardo

2 1

Returning custom autoexpunge for user's INBOX
by Tom Johnson 01 Mar '16

01 Mar '16

I want to be able to have custom autoexpunge settings for different users. I have it working for various folders (draft, junk, trash), but I can't seem to get it working for the user's primary inbox. In my user_query (I'm using mysql), I'm returning entries like this in the userdb_import field: namespace/inbox/mailbox/autoexpunge=5d namespace/inbox/mailbox/Drafts/autoexpunge=5d namespace/inbox/mailbox/Junk/autoexpunge=5d namespace/inbox/mailbox/Trash/autoexpunge=5d And everything works fine for Drafts, Junk, and Trash, but not for the main inbox. The logs show: Debug: Unknown userdb setting: plugin/namespace/inbox/mailbox/autoexpunge=5d I've also tried variations, trying to get the namespace correct for the main inbox, but they all get the same "Unknown userdb setting" error: namespace/inbox/mailbox/autoexpunge=5d namespace/inbox/mailbox/inbox/autoexpunge=5d namespace/inbox/mailbox/Inbox/autoexpunge=5d namespace/inbox/mailbox/INBOX/autoexpunge=5d I suspect I'm just giving the wrong namespace for the primary inbox. What's the right way to do this? Tom

2 2