June 2019 - dovecot - dovecot.org

doveconf complains No matches on !include conf.d/* line but still writes out contents in conf.d
by runappz 05 Jun '19

05 Jun '19

I'm on dovecot 2.3.3 (dcead646b). Output of `dovecot -n`: # 2.3.3 (dcead646b): /etc/dovecot/dovecot.conf # Pigeonhole version 0.5.3 (f018bbab) doveconf: Fatal: Error in configuration file /etc/dovecot/dovecot.conf line 98: No matches doveconf: Error: managesieve-login: dump-capability process returned 89 doveconf: Fatal: Error in configuration file /etc/dovecot/dovecot.conf line 98: No matches While line 98 of dovecot.conf is just "!include conf.d/*.conf". Output of `doveconf -n`: # 2.3.3 (dcead646b): /etc/dovecot/dovecot.conf # Pigeonhole version 0.5.3 (f018bbab) doveconf: Fatal: Error in configuration file /etc/dovecot/dovecot.conf line 98: No matches doveconf: Error: managesieve-login: dump-capability process returned 89 # OS: Linux 4.12.14-lp151.28.4-default x86_64 # Hostname: XXX doveconf: Error: t_readlink(/var/run/dovecot/dovecot.conf) failed: readlink() failed: No such file or directory namespace inbox { ............. (Removed for simplicity) } ssl = required ssl_cert = </etc/postfix/ssl/certs/phys.cer ssl_options = no_compression ssl_prefer_server_ciphers = yes userdb { driver = passwd } It's strange that all the extra content (especially ssl conf) only occurs in conf.d/10-ssl.conf. To dig on what's happening underneath I ran `strace doveconf -n 2>&1 |egrep "\.conf|conf\.d"` and got: write(1, "# 2.3.3 (dcead646b): /etc/doveco"..., 47# 2.3.3 (dcead646b): /etc/dovecot/dovecot.conf openat(AT_FDCWD, "/etc/dovecot/dovecot.conf", O_RDONLY) = 7 wait4(-1, doveconf: Fatal: Error in configuration file /etc/dovecot/dovecot.conf line 98: No matches open("/etc/dovecot/conf.d", O_RDONLY|O_NONBLOCK|O_DIRECTORY|O_CLOEXEC) = 8 openat(AT_FDCWD, "/etc/dovecot/conf.d/90-sieve.conf", O_RDONLY) = 8 ............. (Removed for simplicity) openat(AT_FDCWD, "/etc/dovecot/conf.d/10-ssl.conf", O_RDONLY) = 20 openat(AT_FDCWD, "/etc/dovecot/conf.d/10-auth.conf", O_RDONLY) = 25 stat("/etc/dovecot/conf.d/auth-system.conf.ext", {st_mode=S_IFREG|0644, st_size=2182, ...}) = 0 openat(AT_FDCWD, "/etc/dovecot/conf.d/auth-system.conf.ext", O_RDONLY) = 26 stat("/etc/dovecot/local.conf", 0x7ffd94664760) = -1 ENOENT (No such file or directory) stat("/etc/resolv.conf", {st_mode=S_IFREG|0644, st_size=709, ...}) = 0 open("/etc/host.conf", O_RDONLY|O_CLOEXEC) = 7 read(7, "#\n# /etc/host.conf - resolver co"..., 4096) = 370 open("/etc/resolv.conf", O_RDONLY|O_CLOEXEC) = 7 read(7, "### /etc/resolv.conf is a symlin"..., 4096) = 709 readlink("/var/run/dovecot/dovecot.conf", 0x5555db302598, 128) = -1 ENOENT (No such file or directory) write(2, "doveconf: Error: t_readlink(/var"..., 112doveconf: Error: t_readlink(/var/run/dovecot/dovecot.conf) failed: readlink() failed: No such file or directory It seems that files in conf.d is never read before doveconf's complaint! I have totally no idea why this happens. Any help?

1 0

Re: Potfix+Dovecot with dsync replication problem
by Zeljko Dokman 05 Jun '19

05 Jun '19

Hi all, I am still struggling with this issue. I scraped my previous configuration and started from beginning. Thanks to Aki Tuomi and his suggestion I changed the users in my configurations from vmail --> root and that helped. Now I have a working replication but with some problems and strange behavior. Replication works only when I manually execute a command: "doveadm sync -A tcp:secundary:server:12345" Automatic fast and full sync do not work: doveadm replicator status "*" username priority fast sync full sync success sync failed zdokman none 01:46:14 01:46:14 01:46:14 - doveadm replicator status Queued 'sync' requests 0 Queued 'high' requests 0 Queued 'low' requests 0 Queued 'failed' requests 0 Queued 'full resync' requests 0 Waiting 'failed' requests 0 Total number of known users 1 doveadm replicator dsync-status username type status - Not connected maillog has no error entries. my conf files are attached. I don't understand why is this happening and how to fix it, any help is much appreciated. Best regards, On Mon, 13 May 2019 at 15:23, Zeljko Dokman <zdokman(a)gmail.com> wrote: > Hi, > Thank you for your reply Aki. > I changed my configuration and substituted vmail user with root user. > > Now I have no error massages in maillog but replication is not working, > mails are not visible on second server. > > BR > > > > > > On Mon, 13 May 2019 at 10:50, Aki Tuomi <aki.tuomi(a)open-xchange.com> > wrote: > >> Your problem is that you are running service doveadm as vmail, but you >> are using real uids. You need to start doveadm server as root to be able to >> switch into the correct target user. >> >> Aki >> >> >> On 13.5.2019 11.26, Zeljko Dokman via dovecot wrote: >> >> Hi all, >> >> Any suggestion? >> >> BR >> >> On Mon, 6 May 2019 at 14:22, Zeljko Dokman <zdokman(a)gmail.com> wrote: >> >>> Hi all, >>> >>> I am in need of some help. >>> >>> Straggling to make something work, trying to configure postfix and >>> dovecote imap server with dovecote replication. >>> >>> Can’t figure out what is wrong with my configuration. >>> >>> >>> >>> Replication is working only for vmail user account, I am getting this >>> error on my secondary server for all other users… >>> >>> >>> >>> dovecot: doveadm: Fatal: setgid(4015(zdokman) from userdb lookup) failed >>> with euid=5000(vmail), gid=5000(vmail), egid=5000(vmail): Operation not >>> permitted (This binary should probably be called with process group set to >>> 4015(zdokman) instead of 5000(vmail)) >>> >>> >>> >>> primary server reports this error: >>> >>> >>> >>> dovecot: doveadm(zdokman): Error: doveadm server disconnected before >>> handshake: EOF >>> >>> dovecot: doveadm(zdokman): Error: sync: Disconnected from remote: EOF >>> >>> >>> >>> >>> >>> doveadm replicator status '*' >>> >>> username >>> priority fast sync full sync success sync failed >>> >>> vmail >>> none 01:58:13 02:05:25 01:58:13 - >>> >>> zdokman >>> none 00:00:25 02:55:26 - y >>> >>> test >>> none 00:01:00 21:48:13 - y >>> >>> >>> >>> doveadm sync * >>> >>> doveadm(root): Fatal: execvp(Maildir) failed: Permission denied >>> >>> dsync-local(root): Error: read(remote) failed: EOF (version not received) >>> >>> >>> >>> I am attaching my dovecot.conf main.cf and master.cf. >>> >>> >>> >>> I think my problem is with permissions but I can figure out how to >>> workaround it. >>> >>> >>> >>> Best regards >>> >> >> >> -- >> >> >> >> >> >> > > -- > > > > > --

1 1

Stats/Metrics in 2.3
by Nikolai Lusan 03 Jun '19

03 Jun '19

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Greetings, So the changes to the stats modules between v2.2 and v2.3 have broken some of my monitoring. I am attempting to use the new method of gathering "metrics" from "events" - but the details in the documentation are a bit thin. I started with the examples provided at https://wiki2.dovecot.org/Statistics and tried to build from there with only moderate success. What I am trying to achieve is the monitoring of login attempts (with successes and failures as separate modules - as well as aborted attempts), user sessions an bytes transferred. All this for multiple virtual domains and users. I have attached my current /etc/dovecot/conf.d/10-stats.conf so people can see what I have attempted so far. Based on that file the output I get is: # doveadm stats dump metric_name field count sum min max avg median stddev %95 imap_login_attempt_lusan.id.au duration 0 0 0 0 0.00 0 0.00 0 imap_login_lusan.id.au_failed duration 0 0 0 0 0.00 0 0.00 0 imap_login_lusan.id.au_success duration 0 0 0 0 0.00 0 0.00 0 imap_select_no duration 702 197998 89 13942 282.05 133 1247.14 278 imap_select_no_notfound duration 702 197998 89 13942 282.05 133 1330.67 285 imap_command_list duration 14 287397 17595 25823 20528.36 20060 2194.36 25823 imap_command_select duration 1593 2354698 355 81662 1478.15 743 4583.03 4460 imap_command_search duration 0 0 0 0 0.00 0 0.00 0 imap_command_fetch_ok duration 0 0 0 0 0.00 0 0.00 0 storage_http_gets duration 0 0 0 0 0.00 0 0.00 0 Based on the metrics I have set I would expect to see entries in the first 2 lines at least, given that there are multiple users logged into the server from the monitored domain (or at least the domain I am trying to monitor to begin with). I am also not sure how to get the session and data transfer information out of the metrics/stats system. If anyone can help me I would appreciate it. Thanks - -- Nikolai Lusan <nikolai(a)lusan.id.au> -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEVfd4GW6z4nsBxdLo4ZaDRV2VL6QFAlzz29EACgkQ4ZaDRV2V L6QnIg/8CcB4V/69QSn+zqNhGNX2sHApoaGK0zCt7ITthOlDDVsdVKNT48hxJ3AR uEtoDQL9g3jcDJOQplsobDXmcs/Z6Po275T++8+CY0Bl5iqWO0/6g5LSvNDi6VlS VZzdLyDvAT0+oemaeTHgT/zPwx2waCrs84ZVwMCnuNVQKlE8l05gV2r6aLpgkRFf /Pc6zBwNEXGdthTcnowV2yPiYZkp87jaEl6+4RcHQcYQO1/Q/JEl38/iYlPWdVFZ NVOHpmzZdY9tGRhN0lqiUgivPLZu7gYyfzBeO6JHDOajLUNFW1NR7aKKhyALEOgM GZmjgSODzLjLw8CYx8iGnyMGRsEBDk+NLrJ1zjDqN+xIZkoUcnjkqwpNzurMIW4c kAkFDaPjquXu9eFy4T6V+r23p9E0z0IcWqTFfUyHkdctQApvkjLBFxoc35Abp1Yy I6LzGlGRmiV2Z2HNQYNM3n0w2O+tl4lDpLDN1UCialzfFO81fbHfopk/f9+RHt7b LHy1gTNrUwnLS+3Lobt5p179zNw3C9gtDMdgq355WC/B8jYYJGrw4Y0Jwh7WoyMF w1lPPEByeGTEl/P4zxegKz7oHL+DDBw9BdRdREJ3praUYAVtnMrZgJCJTS0qGh3Z 3m2wCF6yRSwGG8QkwsmoeIF2A6HwjnXcDWHWbOwkkDwh705BUXo= =QfOl -----END PGP SIGNATURE-----

4 6

Mailman option "Set Reply-To header to list" unavailable
by Ralph Seichter 01 Jun '19

01 Jun '19

Looking at https://dovecot.org/mailman/options/dovecot I see that the option "Set Reply-To header to list?" does not accept any changes from me. I assume this might be related to DMARC related header mangling that was discussed at length before. While I do not want to open that particular can of worms again, I would like to force Reply-To: dovecot(a)dovecot.org for my own (!) postings to this mailing list. I actually set this header in my MUA when I post to the Dovecot ML, but it gets overwritten to include my own sender address in Reply-To, which is not what I want. Is there something I can do on my end to ensure that replies get sent to the list only? If not, Is this something the list owners can set for me? Thanks, Ralph

2 1

[mail-crypt-plugin] Private key location in Folder Key Mode
by emordin 01 Jun '19

01 Jun '19

Nice. It worked but I think there is a little output error (probably not a big issue): When I type the following command I get this output: user'@'host:~$ doveadm -o plugin/mail_crypt_private_private_password=1234 mailbox cryptokey export -u username -U /var/vmail/domain/username/Maildir/dovecot-attributes Folder: Public ID: <Public key ID> Error: -----BEGIN PRIVATE KEY----- <private_key> -----END PRIVATE KEY----- And when I type the following command I get this output: user'@'host:~$ doveadm mailbox cryptokey export -u username -U /var/vmail/domain/username/Maildir/dovecot-attributes Folder: Public ID: <Public key ID> Error: ERROR: error:03070068:bignum routines:BN_mpi2bn:encoding error Key: So in the first command the private key shows but it's under Error, and I believe it should be under Key. Thanks again. Sent with [ProtonMail](https://protonmail.com) Secure Email.

1 0

macOS Notes.app IMAP Syncing Not Working
by Steven Smith 01 Jun '19

01 Jun '19

I’m requesting help getting macOS’s Notes.app to sync notes with a new dovecot IMAP server. Thanks to dovecot’s excellent online documentation and help from this list, I have a new perfectly functioning IMAP server. The issue is that macOS Note.app does not sync with this server. However, iOS Notes.app *does* sync and work well with this IMAP server, and the differences between macOS and iOS Notes apps are well known. (Thanks, Apple.) https://apple.stackexchange.com/questions/265579/notes-wont-sync-via-imap-i… <https://apple.stackexchange.com/questions/265579/notes-wont-sync-via-imap-i…> https://jpmens.net/2015/09/28/experiments-using-imap-for-notes/ <https://jpmens.net/2015/09/28/experiments-using-imap-for-notes/> … I am migrating from a working Server.app system in which Notes.app syncing does work across all devices, and therefore have a working dovecot configuration from Server.app, although it does not contain an explicit configuration for the “Notes” mailbox. I would greatly appreciate any help or pointers for these questions: Does anyone have a working template for dovecot that works with macOS Notes.app? I’ve posted doveconf -n of both the new server and the old Server.app server below. Would you all be able to provide advice on TO-DO’s and NOT-TO-DO’s for mailbox/name-space reconfiguration as I try to muck around with a nicely working, deployed IMAP server? I believe that the solution has something to do with name spaces and separators, and I’ve already changed the separator from the original ‘/’ to ‘.’ on the working server without success or obvious changes. All the mail boxes on the new IMAP server look like this, *without* a prefix ‘.’: > ls -1 /var/mail/tld.domain.mail/username/mdbox/mailboxes/ > Archive/ > Deleted Messages/ > Drafts/ > INBOX/ > Junk/ > Notes/ > Sent/ > Trash/ All the mailboxes on the working Server.app mailserver look like this, *with* a prefix ‘.’: > $ sudo ls -1 /Library/Server/Mail/Data/mail/users/username > .Archive > .Deleted Messages > .Drafts > .Junk > .Notes > .Sent Messages > cur > … > new > subscriptions > tmp Here are the `doveconf -n` of the new server that doesn’t sync macOS Notes.app, and the old Server.app IMAP server that does: New server `dovecot -n` [Note: original separator was set to ‘/’, now changed to ‘.’ in config.d/10-mail.conf]: > # 2.3.6 (): /opt/local/etc/dovecot/dovecot.conf > # Pigeonhole version 0.5.6 () > # OS: Darwin 18.6.0 x86_64 apfs > # Hostname: newhost.domain.tld > auth_cache_size = 10 M > auth_gssapi_hostname = $ALL > auth_krb5_keytab = /opt/local/etc/dovecot/imap.keytab > auth_mechanisms = plain gssapi > auth_realms = newhost.domain.tld > auth_socket_path = /opt/local/var/run/dovecot/auth-userdb > auth_username_format = %Ln > debug_log_path = /opt/local/var/log/mail/mail-debug.log > disable_plaintext_auth = no > first_valid_gid = 6 > first_valid_uid = 6 > imap_id_log = * > imap_id_send = "name" * "version" * > imap_idle_notify_interval = 29 mins > imap_urlauth_submit_user = submit > info_log_path = /opt/local/var/log/mail/mail-info.log > last_valid_gid = 100 > lda_mailbox_autocreate = yes > log_path = /opt/local/var/log/mail/mail-err.log > login_log_format_elements = user=<%u> method=%m rip=%r lip=%l mpid=%e %c > mail_access_groups = mail > mail_attachment_dir = /private/var/mail/tld.domain.mail/attachments > mail_attachment_fs = sis posix:mode=0666 > mail_debug = yes > mail_gid = mail > mail_home = /private/var/mail/tld.domain.mail > mail_location = mdbox:/private/var/mail/tld.domain.mail/%Ln/mdbox > mail_log_prefix = "%s(pid %p user %u): " > mail_plugins = quota zlib acl fts fts_solr fts_lucene > mail_privileged_group = mail > mail_uid = _dovecot > managesieve_notify_capability = mailto > managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate mime foreverypart extracttext imapsieve vnd.dovecot.imapsieve > mdbox_rotate_size = 200 M > namespace inbox { > inbox = yes > location = > mailbox Archive { > auto = subscribe > special_use = \Archive > } > mailbox Drafts { > auto = subscribe > special_use = \Drafts > } > mailbox Junk { > auto = create > special_use = \Junk > } > mailbox Notspam_train { > auto = create > special_use = \Junk > } > mailbox Sent { > auto = subscribe > special_use = \Sent > } > mailbox "Sent Messages" { > special_use = \Sent > } > mailbox Spam_train { > auto = create > special_use = \Junk > } > mailbox Trash { > auto = create > special_use = \Trash > } > prefix = > separator = . > } > passdb { > driver = pam > name = pam > } > plugin { > fts = solr > fts_autoindex = yes > fts_autoindex_exclude = \Junk > fts_solr = url=http://127.0.0.1:8983/solr/dovecot/ > imapsieve_mailbox1_before = file:/opt/local/etc/dovecot/sieve/report-spam.sieve > imapsieve_mailbox1_causes = COPY APPEND > imapsieve_mailbox1_name = Spam_train > imapsieve_mailbox2_before = file:/opt/local/etc/dovecot/sieve/report-ham.sieve > imapsieve_mailbox2_causes = COPY APPEND > imapsieve_mailbox2_name = Notspam_train > mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename > mail_log_fields = uid box msgid from subject size flags > quota_grace = 10%% > quota_rule = *:storage=16G > quota_rule2 = Trash:storage=+256M > quota_warning = storage=100%% quota-exceeded %u > quota_warning2 = storage=80%% quota-warning %u > recipient_delimiter = + > sieve = /private/var/mail/tld.domain.mail/rules/%Ln/dovecot.sieve > sieve_after = /opt/local/etc/dovecot/sieve-after.d > sieve_before = /opt/local/etc/dovecot/sieve-before.d > sieve_dir = /private/var/mail/tld.domain.mail/rules/%Ln/%u > sieve_global_extensions = +vnd.dovecot.pipe +vnd.dovecot.environment > sieve_pipe_bin_dir = /opt/local/etc/dovecot/sieve > sieve_plugins = sieve_imapsieve sieve_extprograms > sieve_quota_max_storage = 50M > } > postmaster_address = postmaster(a)domain.tld > protocols = imap lmtp sieve > quota_full_tempfail = yes > sendmail_path = /opt/local/sbin/sendmail > service auth-worker { > group = mail > user = root > } > service auth { > extra_groups = _keytabusers > idle_kill = 15 mins > unix_listener /opt/local/var/spool/postfix/private/auth { > group = mail > mode = 0660 > user = _postfix > } > } > service imap-login { > inet_listener imap { > address = 127.0.0.1, ::1 > port = 143 > } > inet_listener imaps { > port = 993 > ssl = yes > } > process_min_avail = 6 > service_count = 0 > vsz_limit = 2 G > } > service imap { > process_limit = 200 > process_min_avail = 6 > } > service lmtp { > unix_listener /opt/local/var/spool/postfix/private/dovecot-lmtp { > group = mail > mode = 0660 > user = _postfix > } > } > ssl = required > ssl_ca = </etc/certificates/newhost.domain.tld.SHA1.chain.pem > ssl_cert = </etc/certificates/newhost.domain.tld.SHA1.cert.pem > ssl_cipher_list = ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256 > ssl_dh = # hidden, use -P to show it > ssl_key = # hidden, use -P to show it > ssl_min_protocol = TLSv1.2 > ssl_prefer_server_ciphers = yes > userdb { > driver = passwd > name = passwd > } > verbose_proctitle = yes > protocol lda { > mail_fsync = optimized > mail_plugins = quota zlib acl fts fts_solr fts_lucene sieve > } > protocol imap { > mail_max_userip_connections = 50 > mail_plugins = quota zlib acl fts fts_solr fts_lucene imap_acl imap_quota imap_zlib imap_sieve > } > protocol lmtp { > mail_fsync = optimized > mail_plugins = quota zlib acl fts fts_solr fts_lucene sieve > } Old Server.app server `dovecot -n`: > # 2.2.30.2 (c0c463e): /Library/Server/Mail/Config/dovecot/dovecot.conf > # Pigeonhole version 0.4.18 (29cc74d) > # OS: Darwin 17.7.0 x86_64 apfs > aps_topic = com.apple.mail.XServer.d7d6581e-37ed-4a8a-8775-92c4c5a4bf28 > auth_gssapi_hostname = $ALL > auth_mechanisms = cram-md5 plain login gssapi > auth_realms = host.domain.tld > auth_socket_path = /var/run/dovecot/auth-userdb > auth_username_format = %n > debug_log_path = /Library/Logs/Mail/mail-debug.log > default_internal_user = _dovecot > default_login_user = _dovenull > disable_plaintext_auth = no > first_valid_gid = 6 > first_valid_uid = 6 > imap_id_log = * > imap_id_send = "name" * "version" * > imap_urlauth_submit_user = submit > info_log_path = /Library/Logs/Mail/mail-info.log > log_path = /Library/Logs/Mail/mail-err.log > login_log_format_elements = user=<%u> method=%m rip=%r lip=%l mpid=%e %c > mail_access_groups = mail > mail_attribute_dict = file:/Library/Server/Mail/Data/attributes/attributes.dict > mail_location = maildir:/Library/Server/Mail/Data/mail/%u > mail_log_prefix = "%s(pid %p user %u): " > mail_plugins = quota zlib acl fts fts_sk > managesieve_notify_capability = mailto > managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate mime foreverypart extracttext > mdbox_rotate_size = 200 M > namespace acl-mailboxes { > list = children > location = maildir:/Library/Server/Mail/Data/mail/users/%%u:INDEX=/Library/Server/Mail/Data/mail/shared/%%u > prefix = shared.%%u. > separator = . > subscriptions = no > type = shared > } > namespace inbox { > inbox = yes > location = > mailbox Drafts { > special_use = \Drafts > } > mailbox Junk { > special_use = \Junk > } > mailbox Sent { > special_use = \Sent > } > mailbox "Sent Messages" { > special_use = \Sent > } > mailbox Trash { > special_use = \Trash > } > prefix = > } > namespace list-archives { > list = children > location = maildir:/Library/Server/Mail/Data/listserver/messages/archive/lists/%%u:INDEX=/Library/Server/Mail/Data/listserver/messages/archive/shared/%%u > prefix = archives.%%u. > separator = . > subscriptions = no > type = shared > } > passdb { > driver = od > } > passdb { > args = /Library/Server/Mail/Config/dovecot/submit.passdb > driver = passwd-file > } > plugin { > acl = vfile:/Library/Server/Mail/Config/dovecot/global-acls:cache_secs=300 > acl_shared_dict = file:/Library/Server/Mail/Data/shared/shared-mailboxes > fts = sk > quota = maildir:User quota > quota_warning = storage=100%% quota-exceeded %u > quota_warning2 = storage=80%% quota-warning %u > sieve = /Library/Server/Mail/Data/rules/%u/dovecot.sieve > sieve_dir = /Library/Server/Mail/Data/rules/%u > stats_refresh = 30 secs > stats_track_cmds = yes > } > postmaster_address = postmaster(a)host.domain.tld > protocols = imap pop3 lmtp sieve > quota_full_tempfail = yes > service auth { > extra_groups = _keytabusers > idle_kill = 15 mins > unix_listener auth-userdb { > user = _dovecot > } > } > service dns_client { > unix_listener dns-client { > mode = 0600 > } > } > service imap-login { > inet_listener imap { > port = 143 > } > inet_listener imaps { > port = 993 > ssl = yes > } > service_count = 0 > } > service imap { > client_limit = 5 > process_limit = 200 > service_count = 0 > } > service indexer-worker { > user = _dovecot > } > service lmtp { > unix_listener lmtp { > mode = 0600 > } > } > service managesieve-login { > inet_listener sieve { > port = 4190 > } > } > service pop3-login { > inet_listener pop3 { > port = 110 > } > inet_listener pop3s { > port = 995 > ssl = yes > } > } > service pop3 { > client_limit = 5 > process_limit = 200 > service_count = 0 > } > service quota-exceeded { > executable = script /Applications/Server.app/Contents/ServerRoot/usr/libexec/dovecot/quota-exceeded.sh > unix_listener quota-exceeded { > group = mail > mode = 0660 > user = _dovecot > } > user = _dovecot > } > service quota-warning { > executable = script /Applications/Server.app/Contents/ServerRoot/usr/libexec/dovecot/quota-warning.sh > unix_listener quota-warning { > group = mail > mode = 0660 > user = _dovecot > } > user = _dovecot > } > service stats { > fifo_listener stats-mail { > mode = 0600 > user = _dovecot > } > } > ssl = required > ssl_ca = </etc/certificates/host.domain.tld.SHA1.chain.pem > ssl_cert = </etc/certificates/host.domain.tld.SHA1.cert.pem > ssl_cipher_list = ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-DSS-AES128-GCM-SHA256:kEDH+AESGCM:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA256:DHE-RSA-AES256-SHA256:DHE-DSS-AES256-SHA:DHE-RSA-AES256-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:AES:CAMELLIA:DES-CBC3-SHA:!aNULL:!eNULL:!EXPORT:!DES:!RC4:!MD5:!PSK:!aECDH:!EDH-DSS-DES-CBC3-SHA:!EDH-RSA-DES-CBC3-SHA:!KRB5-DES-CBC3-SHA > ssl_key = # hidden, use -P to show it > ssl_key_path = # hidden, use -P to show it > ssl_protocols = !SSLv2 !SSLv3 > userdb { > args = partition=/Library/Server/Mail/Config/dovecot/partition_map.conf global_quota=8192 enforce_quotas=yes > driver = od > } > userdb { > args = /Library/Server/Mail/Config/dovecot/submit.passdb > driver = passwd-file > } > verbose_proctitle = yes > protocol lmtp { > mail_plugins = quota zlib acl fts fts_sk sieve push_notify > } > protocol lda { > mail_plugins = quota zlib acl fts fts_sk sieve push_notify > } > protocol imap { > mail_max_userip_connections = 20 > mail_plugins = quota zlib acl fts fts_sk imap_acl imap_quota imap_zlib > } > protocol pop3 { > mail_max_userip_connections = 6 > }

3 6

[mail-crypt-plugin] Private key location in Folder Key Mode
by emordin 01 Jun '19

01 Jun '19

Hi, So I am trying to locate the private key in dovecot-attributes but I can't seem to find it. I have went thru the strings in the file with the lib-dcrypt document as a guide but the private key doesn't seem to be in there. I'm guessing the private key is an internal attribute located here '/private/vendor/vendor.dovecot/pvt' , but according to the mail-attribute.h file that location is not accessible. Is this true? Or is there a way to see the private key? Thanks. Sent with [ProtonMail](https://protonmail.com) Secure Email.

2 1