June 2019 - dovecot - dovecot.org

Addheader specified field name `Reply-To:' is invalid.
by ＠lbutlr 14 Jun '19

14 Jun '19

Well, progress. At least now editheader loads. Sadly that brings up new errors. specified field name `Reply-To:' is invalid. if header :contains "List-id" "<users.spamassassin.apache.org>" { addheader "Reply-To:" "<users.spamassassin.apache.org>"; addheader "X-added-reply-To:" "True"; fileinto :create “spamassassin"; stop;} -- You only had to look into Teatime's mismatched eyes to know one thing, which was this: if Teatime wanted to find you he would not look everywhere. He'd look in only one place, which would be the place where you were hiding. —Hogfather

2 3

MultiMaster dsync (cluster1 cluster2 cluster3)
by Matthew Brown 14 Jun '19

14 Jun '19

Will MultiMaster dsync work fine or will be big problems ? I configured dovecot to dsync from serv1 to serv2 to serv3 and repeat to serv1 to serv2 to serv3 and repeat... When email received to serv2, it will be synced to serv3, and serv3 will sync it to serv1, and serv1 will sync it to serv2 and will stop here because emails matched. What problems can be with this kind of configuration ? (except that if one of server(cluster) will be stopped, sync will be stopped too until cluster is online again)

2 1

Sieve rewrite headers?
by ＠lbutlr 14 Jun '19

14 Jun '19

I’ve bene looking for examples on how to do this, but so far am coming up short. I want to check certain messages for a reply-ro header and if it is present, rewrite it to X-Reply-To: and then add my own reply-to header. I don’t see anything in the various sieve examples I’ve found on altering the actual message. There is the editheader extension, but I failed to find documentation or examples on how to use it. It appears that I can add a header and delete a header (addheader deleteheader?) but not rewrite one. So something like if header “Reply-to: foo(a)bar.xn--tld-9o0a { addheader "X-Reply-To: foo(a)bar.xn--tld-9o0a deleteheader “Reply-To:” addheader "X-Reply-To: bar(a)foo.xn--tld-9o0a } ?? Do I need to delete the header or will the add header overwrite the one that is there? Also, how do people manage different sieve files? Just cat them all into the active one, or is there a mechanism to import/switch/load other files?

2 1

unknown Sieve Capability `editheader'
by ＠lbutlr 14 Jun '19

14 Jun '19

I am getting "error: error: require command: unknown Sieve capability `editheader’.” In sieve.log: This is the start of .active_sieve ## Active require [ "editheader", "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags" ]; Editheader is also listed in dovecot.conf managesieve_sieve_capability = editheader fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave

2 1

Re: Re: CASifying dovecot and webmail
by charli AGOSSOU 14 Jun '19

14 Jun '19

Hi. I have been trying for a long time to roundcube but I have trouble doing it. It may therefore be necessary to manage the casification of dovecot. Something that is not easy right now with the operating system version that I use. I am working with a kali 2019, and I have compilation errors when running the make on pam_cas. Any help will be useful to me. Thank you Charlie Harper Best regards,

1 0

Re: Migrated from maildir to sdbox: questions
by Daniel Betz 14 Jun '19

14 Jun '19

Hi Ranbir, i think youre just using the wrong quota backend. https://wiki2.dovecot.org/Quota You should switch from "quota = maildir...." to another one, like dict. Converting your Public mailbox you could try this ( no guarantee .. just guessing. make backup ! ): doveadm -o mail_location="maildir:/var/spool/mail/thesandhufamily.ca/public" sync sdbox:/target/folder Regards, Daniel > > Hi Everyone, > > I migrated my maildir mailboxes to sdbox without any show stopping errors, > but I did see this during the migration and now I'm also seeing it in the log: > > Warning: quota: Namespace '' is not Maildir, skipping for Maildir++ quota > > I'm not quite sure why this is happening. Any ideas? > > I am using a "public" namespace for several mailboxes to share emails: > > # public namespace configuration > namespace { > type = public > # the default separator for Maildir is ".", so that is what should be > # used automatically. > separator = . > prefix = Public. > location = maildir:/var/spool/mail/thesandhufamily.ca/public > subscriptions = no > } > > Under the "public" dir in the old maildir setup, I have folders configured for > various mail accounts. For example: > > .Ads > .Junk > .Bills > > etc. > > These "users" are setup in a passwd file so that I can use a different mail > storage location for them than the one they get from ldap (same as above). > > Using dsync to migrate my other mailboxes was easy, but I don't know how > to migrate these public mailboxes. I looked through the wiki and didn't see > anything about how to do it. Could someone explain how I can migrate the > public mailboxes? > > > -- > Ranbir >

3 2

Outlook renames Junk folder
by Cliff Hayes 13 Jun '19

13 Jun '19

Hello, Some versions of Outlook will randomly rename the Junk folder to Junk Email. This of course causes errors because Dovecot can no longer store junk. I go in to Outlook for each user and add another Junk folder, so now they have Junk and Junk Email. This fix action lasts a while until Outlook decides to do it again. Is there a way to tell Dovecot that if the Junk folder doesn't exist, try sending the email to Junk Email folder? Thanks in advance.

3 3

Sieve logging?
by ＠lbutlr 13 Jun '19

13 Jun '19

I am trying to create some sieve scripts to filter my mailing lists and am wondering if sieve logs anywhere, and it so where? I don’t see anything in mail.log beyond lines like: dovecot: lda(kremels(a)kreme.com)<39790><hNchChSkAV1umwAAIdGjjQ>: sieve: msgid=<267D5D71-D99C-4790-8706-C1A92BCC9F97(a)kreme.com>: stored mail into mailbox ‘INBOX' Which doesn’t really tell me anything other than that the script failed. -- If the #2 pencil is the most popular, why is it still #2?

3 6

Re: Sieve logging?
by Matt Anton 13 Jun '19

13 Jun '19

On 13 Jun 2019, at 14:47, @lbutlr wrote: > What sort of configuration change would I need to do to use LMTP instead of LDA? Regarding dovecot, all you need to do is following: <https://wiki.dovecot.org/LMTP> <https://wiki.dovecot.org/HowTo/PostfixDovecotLMTP> (if postfix is your MTA) <https://wiki.dovecot.org/LMTP/Exim> (if exim is your MTA) > And are there any downsides? Not that I’m aware of. Things remained the same as when I was using LDA but using LMTP over Dovecot’s LDA brings some advantages like better performances (no need to fire up new processes for deliveries) among others one. There were several threads on the list related to LDA vs LMTP, such as: <https://dovecot.org/pipermail/dovecot/2016-June/104670.html> <https://dovecot.org/list/dovecot/2013-July/091617.html> > What do I do about > > lda_mailbox_autocreate = yes > lda_mailbox_autosubscribe = yes > > ? They’re also used by LMTP so no need to worry when migrating from LDA to LMTP. You can check what LDA’s options are specifically also used by LMTP in examples/conf.d/15-lda.conf -- matt [at] lv223.org GPG key ID: 7D91A8CA

1 0

Migrated from maildir to sdbox: questions
by Ranbir 13 Jun '19

13 Jun '19

Hi Everyone, I migrated my maildir mailboxes to sdbox without any show stopping errors, but I did see this during the migration and now I'm also seeing it in the log: Warning: quota: Namespace '' is not Maildir, skipping for Maildir++ quota I'm not quite sure why this is happening. Any ideas? I am using a "public" namespace for several mailboxes to share emails: # public namespace configuration namespace { type = public # the default separator for Maildir is ".", so that is what should be # used automatically. separator = . prefix = Public. location = maildir:/var/spool/mail/thesandhufamily.ca/public subscriptions = no } Under the "public" dir in the old maildir setup, I have folders configured for various mail accounts. For example: .Ads .Junk .Bills etc. These "users" are setup in a passwd file so that I can use a different mail storage location for them than the one they get from ldap (same as above). Using dsync to migrate my other mailboxes was easy, but I don't know how to migrate these public mailboxes. I looked through the wiki and didn't see anything about how to do it. Could someone explain how I can migrate the public mailboxes? -- Ranbir

1 0