July 2019 - dovecot - dovecot.org

doveadm migration to server with no root access
by jon rose 26 Jul '19

26 Jul '19

Hi I am trying to do mailbox migrations using doveadm to a server that I do not have root access on without success. Is this possible? What I have done and results: ssh to server with mailboxes to copy and then su cp /etc/dovecot/dovecot.conf /root/tmp/dovecot_new.conf append text below** to end of dovecot_new.conf try to copy mail 3 different ways (all fail see error messages) doveadm -D -v -c /root/tmp/dovecot_new.conf -o mail_fsync=never sync -1 -u test(a)propertyzone.co.za pop3c: fail with: Error: Mailbox INBOX.Archive sync: mailbox_set_subscribed failed: Subscriptions not supported doveadm -D -v -c /root/tmp/dovecot_new.conf -o mail_fsync=never sync -u test(a)propertyzone.co.za pop3c: fail with: Error: Can't create mailbox INBOX.Archive: POP3 mailbox creation isn't supported doveadm -D -v -c /root/tmp/dovecot_new.conf -o mail_fsync=never backup -u test(a)propertyzone.co.za pop3c: fail with: dsync(test(a)propertyzone.co.za): Panic: file mailbox-list-delete.c: line 473 (mailbox_list_delete_symlink_default): assertion failed: (ret > 0) ** append at end of dovecot_new.conf pop3c_host = dedi225.jnb3.host-h.net pop3c_user = test(a)propertyzone.co.za pop3c_password = ***** namespace inbox { inbox = yes } namespace { prefix = POP3-MIGRATION-NS/ location = pop3c: list = no hidden = yes } protocol doveadm { mail_plugins = $mail_plugins pop3_migration } plugin { pop3_migration_mailbox = POP3-MIGRATION-NS/INBOX -- Sent from: http://dovecot.2317879.n4.nabble.com/

2 4

Dovecot, FreeBSD, and Solr?
by David Mehler 26 Jul '19

26 Jul '19

Hello, Does anyone have this combination going? I'm running freebsd and dovecot, to which i'd like to add solr text search. I am stuck on xml schema integration, if anyone has any notes i'd appreciate them. Thanks. Dave.

2 1

dsync crash
by tono 25 Jul '19

25 Jul '19

Hello, I am getting a persistent seg fault while trying to sync our server to a new location. We are on 2.2.33.2, due for an upgrade but we have used dsync successfully in the past. In fact, we used it to populate this same instance. So I hope this is just a configuration issue. My logs are being filled with these errors:: 2019-07-10T08:29:53-04:00 localhost dovecot: [ID 583609 mail.crit] doveadm: Fatal: master: service(doveadm): child 44707 killed with signal 11 (core dumped) On the remote we see: 2019-07-10T10:17:24-04:00 localhost dovecot: [ID 583609 mail.error] doveadm: Error: read(111.111.111.111) failed: EOF (version not received) I tried doing sync manually: truss -rall -wall -f doveadm sync -u tpyro(a)metro-email.com tcp:123.123.123.123 55440: V E R S I O N\t d o v e a d m - s e r v e r\t 1\t 1\n 55440: pollsys(0x0816EB88, 1, 0x00000000, 0x00000000) = 1 55440: read(10, " -\n", 8192) = 2 55440: write(10, 0x08126598, 31) = 31 55440: P L A I N\t P A S s w o R d R E D A C t E D x W o e N X H h\n 55440: read(10, 0x0814980A, 8190) Err#11 EAGAIN 55440: pollsys(0x0816EB88, 1, 0x00000000, 0x00000000) = 1 55440: read(10, 0x0814980A, 8190) = 27 55440: V E R S I O N\t d o v e a d m - c l i e n t\t 1\t 1\n 55440: read(10, 0x08149825, 8163) Err#11 EAGAIN 55440: pollsys(0x0816EB88, 1, 0x00000000, 0x00000000) = 1 55440: read(10, " +\n", 8163) = 2 55440: write(10, 0x081738D0, 60) = 60 55440: \t u s e r 1 @ d o m a i n - n a m e . c o m\t d s y n c - s e r 55440: v e r\t - u u s e r 1 @ d o m a i n - n a m e . c o m\n 55440: pollsys(0x0816EB88, 1, 0x00000000, 0x00000000) = 1 55440: Incurred fault #6, FLTBOUNDS %pc = 0xFEC84490 55440: siginfo: SIGSEGV SEGV_MAPERR addr=0xD89CDB4E 55440: Received signal #11, SIGSEGV [default] 55440: siginfo: SIGSEGV SEGV_MAPERR addr=0xD89CDB4E I saw the note in the wiki about "dovecot --hostdomain" so I made sure they do not match. The new target (z-imap2) was built using a zfs clone from the source (z-imap1). I changed the 'hostname', 'instance_name", and 'mail_replica' fields but otherwise they are identical. Did I miss something? Thanks, Tony # 2.2.33.2 (d6601f4ec): /opt/local/etc/dovecot/dovecot.conf # Pigeonhole version 0.4.21 (92477967) # OS: SunOS 5.11 i86pc auth_cache_negative_ttl = 0 auth_cache_size = 1 M auth_default_realm = domain-name.com auth_mechanisms = plain login auth_verbose = yes default_process_limit = 500 default_vsz_limit = 512 M doveadm_password = # hidden, use -P to show it doveadm_port = 10993 hostname = z-imap1 instance_name = dovecot-2.2.13 # Note this was a reference to an earlier install, just an oversight. True version is 2.2.33.2. mail_location = mdbox:%h/mdbox mail_plugins = " mail_log notify replication" mail_privileged_group = mail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave duplicate mdbox_rotate_size = 10 M namespace inbox { inbox = yes location = mailbox "Deleted Messages" { special_use = \Trash } mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = } prefix = separator = / } passdb { args = scheme=CRYPT username_format=%Lu /opt/local/etc/dovecot/users driver = passwd-file } plugin { imapsieve_mailbox1_before = file:/opt/local/etc/dovecot/sieve/spam-training/report-spam.sieve imapsieve_mailbox1_causes = COPY imapsieve_mailbox1_name = Junk imapsieve_mailbox2_before = file:/opt/local/etc/dovecot/sieve/spam-training/report-spam.sieve imapsieve_mailbox2_causes = COPY imapsieve_mailbox2_name = Spam imapsieve_mailbox3_before = file:/opt/local/etc/dovecot/sieve/spam-training/report-ham.sieve imapsieve_mailbox3_causes = COPY imapsieve_mailbox3_from = Junk imapsieve_mailbox3_name = INBOX imapsieve_mailbox4_before = file:/opt/local/etc/dovecot/sieve/spam-training/report-ham.sieve imapsieve_mailbox4_causes = COPY imapsieve_mailbox4_from = Spam imapsieve_mailbox4_name = INBOX imapsieve_mailbox5_before = file:/opt/local/etc/dovecot/sieve/spam-training/report-ham.sieve imapsieve_mailbox5_causes = COPY imapsieve_mailbox5_from = * imapsieve_mailbox5_name = NotJunk mail_replica = tcp:123.123.123.123 # True IP redacted sieve = file:~/sieve;active=~/.dovecot.sieve sieve_after = /opt/local/etc/dovecot/sieve/spam-training/spam-to-folder.sieve sieve_global_extensions = +vnd.dovecot.pipe +vnd.dovecot.environment sieve_pipe_bin_dir = /opt/local/etc/dovecot/sieve/spam-training sieve_plugins = sieve_imapsieve sieve_extprograms sieve_trace_dir = /opt/local/etc/dovecot/sieve/trace sieve_trace_level = matching } postmaster_address = postmaster(a)domain-name.com protocols = imap lmtp sieve replication_max_conns = 1 service aggregator { fifo_listener replication-notify-fifo { user = doveuser } unix_listener replication-notify { user = doveadm } } service anvil { client_limit = 1503 } service auth { client_limit = 2500 unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-userdb { group = mail mode = 0660 } } service doveadm { inet_listener { port = 10993 } vsz_limit = 4 G } service imap { executable = imap postlogin vsz_limit = 3 G } service indexer-worker { vsz_limit = 4 G } service lmtp { inet_listener lmtp { port = 51924 } unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0660 user = postfix } } service postlogin { executable = script-login rawlog -t } service replicator { process_min_avail = 1 unix_listener replicator-doveadm { mode = 0600 } } ssl_cert = </opt/custom/etc/ssl/wildcard.domain-name.com/wildcard.domain-name.com.bundled.crt ssl_key = # hidden, use -P to show it userdb { args = username_format=%u /opt/local/etc/dovecot/users driver = passwd-file } verbose_proctitle = yes protocol imap { mail_max_userip_connections = 24 mail_plugins = mail_log notify replication imap_sieve } protocol lmtp { mail_plugins = mail_log notify replication sieve }

1 1

lmtp with non ASCII Parameters changed in dovecot 2.3
by Matthias Lay 25 Jul '19

25 Jul '19

Hi, I updated from 2.2 to 2.3 and noticed lmtp rejects parameters containing non ASCII now. this worked with dovecot-2.2 lmtp. the string is already denied after reading in "smtp_command_parse_parameters()" mail from:<bluö> 500 5.5.2 Invalid command syntax is there a plan to change this behaviour, or to implement the SMTPUTF8 extension in lib-smtp? I guess thie would fix Michals "Dovecot LMTP rejecting mail from address with apostrophe" Problem too. Greetz Matze

1 1

Sieve adding header content to a different header
by ＠lbutlr 24 Jul '19

24 Jul '19

Given a message itht he headers: Subject: This is the subject: X-Foo: bar how would I do the following: 1) Add the contents of X-Foo to subject Subject: [bar] This is the subject 2) replicate the X-Foo header into X-temp X-temp: X-foo-bar -- THE PRESIDENT DID IT IS NOT AN EXCUSE Bart chalkboard Ep. AABF05

2 2

Freebsd ports?
by ＠lbutlr 23 Jul '19

23 Jul '19

The version of dovecot in freebsd ports tree is still 2.3.6, any idea when this will be updated to 2.3.7? -- "I can't see the point in the theatre. All that sex and violence. I get enough of that at home. Apart from the sex, of course." - Baldrick

2 2

Dovecot v2.3.7.1 & Pigeonhole v0.5.7.1 released
by Timo Sirainen 23 Jul '19

23 Jul '19

https://dovecot.org/releases/2.3/dovecot-2.3.7.1.tar.gz https://dovecot.org/releases/2.3/dovecot-2.3.7.1.tar.gz.sig https://pigeonhole.dovecot.org/releases/2.3/dovecot-2.3-pigeonhole-0.5.7.1.… https://pigeonhole.dovecot.org/releases/2.3/dovecot-2.3-pigeonhole-0.5.7.1.… Binary packages in https://repo.dovecot.org/ These releases fix the reported regressions in v2.3.7 & v0.5.7. Dovecot core: - Fix TCP_NODELAY errors being logged on non-Linux OSes - lmtp proxy: Fix assert-crash when client uses BODY=8BITMIME - Remove wrongly added checks in namespace prefix checking Pigeonhole: - dsync: Sieve script syncing failed if mailbox attributes weren't enabled.

2 1

Fwd: Character not allowed in mailbox name
by Lothar Schilling 23 Jul '19

23 Jul '19

Hi Arnold, thanks for your assistance. I solved the issue right now by changing prefix = Shared/%%u/ to prefix = Shared/%%n/ This omits the @mydomain.de part which holds the dot causing the trouble. Why this became a problem due to the update I wouldn't know. Regards Lothar Am 22.07.2019 um 10:49 schrieb Arnold Opio Oree: > Hi Lothar, > > I haven't yet had the opportunity to go deep into Dovecot engineering / > development, (so please correct me if necessary anyone). > > I have experienced this exception where attempting to copy mailbox data > within a client from IMAP account to IMAP account, but I have not had > it cause a mailbox to become inaccessible. > > The reason was because Maildir++ format uses the "." separator to > delineate child directories, and therefore the character is illegal in > mailbox names. The issue was addressed by either changing the > filesystem layout to LAYOUT=fs or by changing the mailbox format > altogether to e.g. sdbox. > >> location = maildir:%%h:INDEX=%h/shared/%%u > I can see from your configuration that the LAYOUT is not set as fs, so > I would assume is still using Maildir++. > > Perhaps this setting was lost during the upgrade? > > Regards, > > Arnold Opio Oree > Chief Executive Officer > Parallax Digital Technologies > > arnoldoree(a)parallaxdt.com > > http://www.parallaxdt.com > > tel : +44 (0) 333 577 8587 > fax : +44 (0) 20 8711 2477 > > Parallax Digital Technologies is a trading name of Parallax Global > Limited. U.K. Co. No. 08836288 > > The contents of this e-mail are confidential. If you are not the > intended recipient you are to delete this e-mail immediately, disregard > its contents and disclose them to no other persons. > > -----Original Message----- > From: Lothar Schilling via dovecot <dovecot(a)dovecot.org> > Reply-To: Lothar Schilling <ls(a)proasyl.de> > To: dovecot(a)dovecot.org > Subject: Character not allowed in mailbox name > Date: Mon, 22 Jul 2019 08:33:45 +0200 > > Hi everybody, > > after an update this morning to dovecot 2.3.7 we cannot connect to our > shared mailboxes anymore. The error message as issued in Thunderbird: > > "Character not allowed in mailbox name '.'" > > I didn't change anything about the configuration. Output of dovecot -n: > > [...] > namespace { > list = children > location = maildir:%%h:INDEX=%h/shared/%%u > prefix = Shared/%%u/ > separator = / > subscriptions = yes > type = shared > } > [...] > > Any help would be appreciated, thank you very much. > > Lothar Schilling > > > > >

3 2

Re: Dovecot 2.3.6 on Solaris10: build issues, segfaults
by Joseph Tam 22 Jul '19

22 Jul '19

Looking further into this segfault at settings-parser.c:setting_copy():1519 *dest_size = *src_size; *src_size points to type size_t (typedef unsigned long), a 4-byte aligned value consistent with a 32-bit build. This is mismatched with declared type (gdb) whatis src_size type = const uoff_t * (gdb) whatis uoff_t type = unsigned long long (gdb) p sizeof(uoff_t) $1 = 8 resulting in the segfault when *src_size is dereferened. The implied condition of this code segment is typeof(uoff_t)==typeof(size_t) which is clearly not the case. I'm not sure how/if uoff_t is defined, but configure reports checking for uoff_t... no checking type of off_t... long long The latter is weird, because if I compile and run using the same compiler flags #include <stdio.h> int main(void) { printf("%d %d\n",sizeof(long long),sizeof(off_t)); } the output is "8 4". Joseph Tam <jtam.home(a)gmail.com>

2 2

Dovecot with MySQL over SSL.
by Reio Remma 22 Jul '19

22 Jul '19

Hello! I'm attempting to get Dovecot working with MySQL user database on another machine. I can connect to the MySQL (5.7.26) instance with SSL enabled: mysql -h db.mrst.ee --ssl-ca=/etc/dovecot/ca.pem --ssl-cert=/etc/dovecot/client-cert.pem --ssl-key=/etc/dovecot/client-key.pem --ssl-cipher=DHE-RSA-AES256-SHA -u vmail -p However if I use the same values in dovecot-sql.conf.ext, I get the following error: Jul 19 00:20:18 turin dovecot: master: Dovecot v2.3.7 (494d20bdc) starting up for imap, lmtp, sieve (core dumps disabled) Jul 19 00:20:18 turin dovecot: auth-worker(82996): Error: mysql(db.mrst.ee): Connect failed to database (vmail): SSL connection error: protocol version mismatch - waiting for 1 seconds before retry Jul 19 00:20:18 turin dovecot: auth-worker(82996): Error: mysql(db.mrst.ee): Connect failed to database (vmail): SSL connection error: protocol version mismatch - waiting for 1 seconds before retry Jul 19 00:20:19 turin dovecot: auth-worker(82996): Error: mysql(db.mrst.ee): Connect failed to database (vmail): Connections using insecure transport are prohibited while --require_secure_transport=ON. - waiting for 5 seconds before retry Jul 19 00:20:19 turin dovecot: auth-worker(82996): Error: mysql(db.mrst.ee): Connect failed to database (vmail): Connections using insecure transport are prohibited while --require_secure_transport=ON. - waiting for 5 seconds before retry Database connection string: connect = host=db.mrst.ee dbname=vmail user=vmail password=stuff \ ssl_ca=/etc/dovecot/ca.pem \ ssl_cert=/etc/dovecot/client-cert.pem \ ssl_key=/etc/dovecot/client-key.pem \ ssl_cipher=DHE-RSA-AES256-SHA If I leave the ssl_cipher unset, I get: Jul 19 00:23:41 turin dovecot: auth-worker(83069): Error: mysql(db.mrst.ee): Connect failed to database (vmail): SSL connection error: Failed to set ciphers to use - waiting for 1 seconds before retry Any ideas? Thanks! Reio

4 9