July 2021 - dovecot - dovecot.org

Dovecot silently discards duplicates?
by dovecot＠ptld.com 09 Jul '21

09 Jul '21

I setup an alias(a)example.com in postfix to point at me(a)example.com I send one email to me(a)example.com and alias(a)example.com, tried both ways of using CC and putting both addresses in the To field. I see in postfix logs that it delivers two messages to dovecot-lmtp. However i only get one copy of the email in my inbox. I assume dovecot is detecting duplicate emails going to the same location and just discarding one of them. Is there a setting to control this behavior? Can dovecot be told to deliver what it was given and not decide to discard?

1 0

dsync replication fails with No space left on device / Out of memory
by Steven Varco 08 Jul '21

08 Jul '21

Hi All Since I configured dsync replication I get strange errors in the maillog on my two mail dovecot nodes: PRIMARY: Jul 2 01:21:42 mx01.example.com dovecot: doveadm: Error: read(mx02.example.com) failed: read(size=3148) failed: Connection reset by peer (last sent=mail, last recv=mail (EOL)) The secondary is more interesting: SECONDARY Jul 2 01:21:42 mx02 dovecot: doveadm: Error: close(-1[istream-seekable.c:237]) failed: No space left on device Jul 2 01:21:43 mx02 dovecot: doveadm: Fatal: pool_system_realloc(268435456): Out of memory Jul 2 01:21:43 mx02 dovecot: doveadm: Error: Raw backtrace: /usr/lib64/dovecot/libdovecot.so.0(+0xa192e) [0x7f2e9be4c92e] -> /usr/lib64/dovecot/libdovecot.so.0(+0xa1a0e) [0x7f2e9be4ca0e] -> /usr/lib64/dovecot/libdovecot.so.0(i_error+0) [0x7f2e9bddc3d3] -> /usr/lib64/dovecot/libdo Jul 2 01:21:43 mx02 dovecot: doveadm: Fatal: master: service(doveadm): child 2876 returned error 83 (Out of memory (service doveadm { vsz_limit=256 MB }, you may need to increase it) - set CORE_OUTOFMEM=1 environment to get core dump) Jul 2 01:21:51 mx02 dovecot: dsync-local(user(a)example.com): Error: Raw backtrace: /usr/lib64/dovecot/libdovecot.so.0(+0xa192e) [0x7fd56e17e92e] -> /usr/lib64/dovecot/libdovecot.so.0(+0xa1a0e) [0x7fd56e17ea0e] -> /usr/lib64/dovecot/libdovecot.so.0(i_error+0) [0x7fd56e10e3d3] -> /us Jul 2 01:21:51 mx02 dovecot: dsync-local(user(a)example.com): Fatal: master: service(doveadm): child 2882 returned error 83 (Out of memory (service doveadm { vsz_limit=256 MB }, you may need to increase it) - set CORE_OUTOFMEM=1 environment to get core dump) The error messages state that disk space and/or memory is a problem, but disk space and memory is enough available: mx02 [~] # df -h /srv/mail/ Filesystem Size Used Avail Use% Mounted on /dev/mapper/system-mail 10G 5.7G 4.3G 58% /srv/mail mx02 [~] # free -m total used free shared buff/cache available Mem: 3789 1602 1088 199 1097 1759 Swap: 471 93 378 I also tried to increase vsz_limit from 256 MB to 512 MB, which did not help. And for the sake of completness also the connection to the doveadm port works well from both nodes: mx01-prod [~] # telnet mx02 14310 Trying 172.20.19.225... Connected to mx02. Escape character is '^]'. ^] mx02 [~] # telnet mx01 14310 Trying 172.20.19.251... Connected to mx01. Escape character is '^]'. ^] Although mail replication seems to be working properly and mails are in sync on both nodes (as what I could see), I would like to find the cause of this messages, as this does definetely don’t look normal… I’m grateful for any help, since I’m quite on a struggle now… Steven Here’s my config -------------------------------------------------------------------------------- # doveconf -n # 2.2.36 (1f10bfa63): /etc/dovecot/dovecot.conf # Pigeonhole version 0.4.24 (124e06aa) # OS: Linux 3.10.0-1160.31.1.el7.x86_64 x86_64 CentOS Linux release 7.9.2009 (Core) # Hostname: mx01.example.com auth_mechanisms = plain login auth_verbose = yes dict { sqlquota = mysql:/etc/dovecot/dict-sqlquota.conf.ext } doveadm_password = # hidden, use -P to show it doveadm_port = 14310 first_valid_uid = 1000 mail_plugins = quota notify replication managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate mime foreverypart extracttext mbox_write_locks = fcntl namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = separator = / type = private } passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { mail_replica = tcp:mx02.example.com quota = maildir:User quota quota_exceeded_message = Quota exceeded, please go to http://www.example.com/over_quota_help for instructions on how to fix this. quota_rule2 = INBOX.Trash:storage=+100M quota_status_nouser = DUNNO quota_status_overquota = 552 5.2.2 Mailbox is full / Mailbox ist voll quota_status_success = DUNNO quota_warning = storage=90%% quota-warning 90 %u quota_warning2 = -storage=90%% quota-warning below %u sieve = file:~/sieve;active=~/.dovecot.sieve } postmaster_address = postmaster(a)example.com protocols = imap pop3 lmtp sieve replication_dsync_parameters = -d -l 30 -U service aggregator { fifo_listener replication-notify-fifo { user = vmail } unix_listener replication-notify { user = vmail } } service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-userdb { user = vmail } } service dict { unix_listener dict { user = vmail } } service doveadm { inet_listener { port = 14310 ssl = no } } service managesieve-login { inet_listener sieve { port = 4190 } } service quota-status { client_limit = 1 executable = quota-status -p postfix inet_listener { port = 14340 } } service quota-warning { executable = script /usr/local/libexec/dovecot/quota-warning.sh unix_listener quota-warning { user = vmail } user = vmail } service replicator { process_min_avail = 1 unix_listener replicator-doveadm { mode = 0600 user = vmail } } ssl = required ssl_cert = </etc/ssl/acme/certs/mail.example.com.chain.crt ssl_key = # hidden, use -P to show it userdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } verbose_proctitle = yes protocol lmtp { mail_plugins = quota notify replication sieve } protocol lda { mail_plugins = quota notify replication sieve } protocol imap { mail_max_userip_connections = 20 mail_plugins = quota notify replication imap_quota } -------------------------------------------------------------------------------- mx02.example.com has exact the same config, except of: -------------------------------------------------------------------------------- plugin { mail_replica = tcp:mx01.example.com -------------------------------------------------------------------------------- — https://steven.varco.ch/ https://www.tech-island.com/

5 6

Deleting an active sieve script leaves sieve unfunctional
by Tobias Leupold 07 Jul '21

07 Jul '21

Dear devs, I noticed this using Dovecot 2.3.7.2, set up on a newly created Ubuntu 20.04 server. If I delete a sieve script via KMail's managesieve interface, and the script is active, it leaves sieve unfunctional afterwards. What's happening is this: Dovecot creates a USER.sieve script containing all active scripts, e. g.: require ["include"]; include :personal "some-script"; include :personal "some-other-script"; Now if I delete "some-script", it's actually deleted, but USER.sieve is not updated (and still contains 'include :personal "some-script";'). So next time an email is filtered, this happens: mail log: Jul 5 15:20:01 server dovecot: lda(user@domain)<123456> <xxxxxxxxxxxxxxxxxxxxxx>: sieve: Failed to compile script `/srv/sieve/user(a)domain/active-script.sieve' (view user logfile `/srv/sieve/user(a)domain/active-script.sieve.log' for more information) active-script.sieve.log: sieve: info: started log at Jul 05 14:57:54. USER: line 12: error: included personal script 'some_script' does not exist. USER: error: validation failed. So, to avoid this, one has to FIRST deactivate the respectice script, so that USER.sieve is updated and THEN delete the script. Or to manually fix USER.sieve on the server, which is surely not what's intended. So the question is now: Is this a KMail bug, a Doveceot bug, or is the server misconfigured?! Thanks for all help! Cheers, Tobias

6 13

Postfix / Dovecot Not Able to Authenticate
by techlists＠phpcoderusa.com 06 Jul '21

06 Jul '21

Hi My name is Keith Smith. I am a PHP developer and have been a freelance PHP developer since 2006. I have been working on a PHP web server in the hope of learning more about Linux hosting server administration. Over the years I have had the opportunity to create many PHP virtual hosts. I have not worked with or configured BIND, Postfix, and Dovecot before about 3 weeks ago. My home server is connected to the Internet via my home office business cable account. No blocked ports and I am able run one or more servers. I am running Ubuntu 20.04lts / Apache / MySql (or a clone) / PHP / BIND9 / Postfix / Dovecot / Let's Encrypt SSL. My server’s FQDN is : soho.keiththewebguy.com as is my reverse lookup on my IP : 98.191.108.149. The purpose is for learning. I intend to run one such configured server out of my home office running one domain or more (virtual hosts) and would like to configure Postfix/Dovecot to service one or more email addresses per virtual hosting. I have BIND working. At least enough that a simple web page can be displayed. I've installed Postfix and Dovecot and am getting an authentication issue that shows up in the logs. I do not know all that you might need. Please let me know. I admit I find Postfix and Dovecot difficult to understand. I am at the newbie stage. I've scoured the Internet looking for answers. After I configured Postfix and Dovecot I issued the commend : telnet keiththewebguy.com 25 on my web server. It returned: Trying 98.191.108.149... Connected to keiththewebguy.com. Escape character is '^]'. 220 soho.keiththewebguy.com ESMTP Postfix I issued : ehlo soho.keiththewebguy.com 250-soho.keiththewebguy.com 250-PIPELINING 250-SIZE 10240000 250-VRFY 250-ETRN 250-STARTTLS 250-AUTH PLAIN LOGIN 250-ENHANCEDSTATUSCODES 250-8BITMIME 250-DSN 250 CHUNKING I issued : quit 221 2.0.0 Bye Connection closed by foreign host. --- I assume this means things are configured correctly. I am looking at both logs: 1) /var/log/mail.err which contains no content. 2) /var/log/mail.log which is verbose. To /etc/dovecot/dovecot.conf I added the following for debugging: auth_verbose = yes auth_verbose_passwords = no auth_debug = yes auth_debug_passwords = yes mail_debug = yes verbose_ssl = yes I am trying to connect using Thunderbird. Config: IMAP port 993 / ssl/TLS / Normal Password / username : keith(a)keiththewebguy.com and password that is in /etc/dovecot/dovecot-users SMTP port 25 / STARTTLS / Normal Password / username : keith(a)keiththewebguy.com and password that is in /etc/dovecot/dovecot-users Thunderbird tests these configurations and reports them as found on the server. When I press the done button to create the email account I get a message "Unable to log into the server. Probably wrong configuration, username, or password.". The output when trying to create the Thunderbird account: /var/log/mail.log =============== Jul 5 18:58:35 soho dovecot: imap-login: Debug: SSL: where=0x10, ret=1: before SSL initialization Jul 5 18:58:35 soho dovecot: imap-login: Debug: SSL: where=0x2001, ret=1: before SSL initialization Jul 5 18:58:35 soho dovecot: imap-login: Debug: SSL: where=0x2002, ret=-1: before SSL initialization Jul 5 18:58:35 soho dovecot: imap-login: Debug: SSL: where=0x2001, ret=1: before SSL initialization Jul 5 18:58:35 soho dovecot: imap-login: Debug: SSL: where=0x2001, ret=1: SSLv3/TLS read client hello Jul 5 18:58:35 soho dovecot: imap-login: Debug: SSL: where=0x2001, ret=1: SSLv3/TLS write server hello Jul 5 18:58:35 soho dovecot: imap-login: Debug: SSL: where=0x2001, ret=1: SSLv3/TLS write certificate Jul 5 18:58:35 soho dovecot: imap-login: Debug: SSL: where=0x2001, ret=1: SSLv3/TLS write key exchange Jul 5 18:58:35 soho dovecot: imap-login: Debug: SSL: where=0x2001, ret=1: SSLv3/TLS write server done Jul 5 18:58:35 soho dovecot: imap-login: Debug: SSL: where=0x2002, ret=-1: SSLv3/TLS write server done Jul 5 18:58:35 soho dovecot: message repeated 2 times: [ imap-login: Debug: SSL: where=0x2002, ret=-1: SSLv3/TLS write server done] Jul 5 18:58:35 soho dovecot: imap-login: Debug: SSL: where=0x2001, ret=1: SSLv3/TLS write server done Jul 5 18:58:35 soho dovecot: imap-login: Debug: SSL: where=0x2001, ret=1: SSLv3/TLS read client key exchange Jul 5 18:58:35 soho dovecot: imap-login: Debug: SSL: where=0x2001, ret=1: SSLv3/TLS read change cipher spec Jul 5 18:58:35 soho dovecot: imap-login: Debug: SSL: where=0x2001, ret=1: SSLv3/TLS read finished Jul 5 18:58:35 soho dovecot: imap-login: Debug: SSL: where=0x2001, ret=1: SSLv3/TLS write session ticket Jul 5 18:58:35 soho dovecot: imap-login: Debug: SSL: where=0x2001, ret=1: SSLv3/TLS write change cipher spec Jul 5 18:58:35 soho dovecot: imap-login: Debug: SSL: where=0x2001, ret=1: SSLv3/TLS write finished Jul 5 18:58:35 soho dovecot: imap-login: Debug: SSL: where=0x20, ret=1: SSL negotiation finished successfully Jul 5 18:58:35 soho dovecot: imap-login: Debug: SSL: where=0x2002, ret=1: SSL negotiation finished successfully Jul 5 18:58:35 soho dovecot: auth: Debug: Loading modules from directory: /usr/lib/dovecot/modules/auth Jul 5 18:58:35 soho dovecot: auth: Debug: Module loaded: /usr/lib/dovecot/modules/auth/lib20_auth_var_expand_crypt.so Jul 5 18:58:35 soho dovecot: auth: Debug: Read auth token secret from /var/run/dovecot/auth-token-secret.dat Jul 5 18:58:35 soho dovecot: auth: Debug: passwd-file /etc/dovecot/dovecot-users: Read 1 users in 0 secs Jul 5 18:58:35 soho dovecot: auth: Debug: auth client connected (pid=2021) Jul 5 18:58:35 soho dovecot: auth: Debug: client in: AUTH#0111#011PLAIN#011service=imap#011secured=tls#011session=wVJ55GTGvspiv2yV#011lip=192.168.1.10#011rip=98.191.108.149#011lport=993#011rport=51902#011local_name=mail.keiththewebguy.com#011ssl_cipher=ECDHE-RSA-AES128-GCM-SHA256#011ssl_cipher_bits=128#011ssl_pfs=KxECDHE#011ssl_protocol=TLSv1.2 Jul 5 18:58:35 soho dovecot: auth: Debug: client passdb out: CONT#0111#011 Jul 5 18:58:35 soho dovecot: auth: Debug: client in: CONT#0111#011AGtlaXRoQGtlaXRodGhld2ViZ3V5LmNvbQBJY2VjcmVhbS1Db25lXjIx (previous base64 data may contain sensitive data) Jul 5 18:58:35 soho dovecot: auth: Debug: passwd-file(keith(a)keiththewebguy.com,98.191.108.149,<wVJ55GTGvspiv2yV>): Performing passdb lookup Jul 5 18:58:35 soho dovecot: auth: Debug: passwd-file(keith(a)keiththewebguy.com,98.191.108.149,<wVJ55GTGvspiv2yV>): lookup: user=keith(a)keiththewebguy.com file=/etc/dovecot/dovecot-users Jul 5 18:58:35 soho dovecot: auth: passwd-file(keith(a)keiththewebguy.com,98.191.108.149,<wVJ55GTGvspiv2yV>): unknown user Jul 5 18:58:35 soho dovecot: auth: Debug: passwd-file(keith(a)keiththewebguy.com,98.191.108.149,<wVJ55GTGvspiv2yV>): Finished passdb lookup Jul 5 18:58:35 soho dovecot: auth: Debug: auth(keith(a)keiththewebguy.com,98.191.108.149,<wVJ55GTGvspiv2yV>): Auth request finished Jul 5 18:58:37 soho dovecot: auth: Debug: client passdb out: FAIL#0111#011user=keith(a)keiththewebguy.com Jul 5 18:58:37 soho dovecot: auth: Debug: client in: AUTH#0112#011LOGIN#011service=imap#011secured=tls#011session=wVJ55GTGvspiv2yV#011lip=192.168.1.10#011rip=98.191.108.149#011lport=993#011rport=51902#011local_name=mail.keiththewebguy.com#011ssl_cipher=ECDHE-RSA-AES128-GCM-SHA256#011ssl_cipher_bits=128#011ssl_pfs=KxECDHE#011ssl_protocol=TLSv1.2 Jul 5 18:58:41 soho dovecot: auth: Debug: client passdb out: CONT#0112#011VXNlcm5hbWU6 Jul 5 18:58:41 soho dovecot: auth: Debug: client in: CONT#0112#011a2VpdGhAa2VpdGh0aGV3ZWJndXkuY29t (previous base64 data may contain sensitive data) Jul 5 18:58:41 soho dovecot: auth: Debug: client passdb out: CONT#0112#011UGFzc3dvcmQ6 Jul 5 18:58:41 soho dovecot: auth: Debug: client in: CONT#0112#011SWNlY3JlYW0tQ29uZV4yMQ== (previous base64 data may contain sensitive data) Jul 5 18:58:41 soho dovecot: auth: Debug: passwd-file(keith(a)keiththewebguy.com,98.191.108.149,<wVJ55GTGvspiv2yV>): Performing passdb lookup Jul 5 18:58:41 soho dovecot: auth: Debug: passwd-file(keith(a)keiththewebguy.com,98.191.108.149,<wVJ55GTGvspiv2yV>): lookup: user=keith(a)keiththewebguy.com file=/etc/dovecot/dovecot-users Jul 5 18:58:41 soho dovecot: auth: passwd-file(keith(a)keiththewebguy.com,98.191.108.149,<wVJ55GTGvspiv2yV>): unknown user Jul 5 18:58:41 soho dovecot: auth: Debug: passwd-file(keith(a)keiththewebguy.com,98.191.108.149,<wVJ55GTGvspiv2yV>): Finished passdb lookup Jul 5 18:58:41 soho dovecot: auth: Debug: auth(keith(a)keiththewebguy.com,98.191.108.149,<wVJ55GTGvspiv2yV>): Auth request finished Jul 5 18:58:43 soho dovecot: auth: Debug: client passdb out: FAIL#0112#011user=keith(a)keiththewebguy.com Jul 5 18:58:43 soho dovecot: auth: Debug: client in: AUTH#0113#011PLAIN#011service=imap#011secured=tls#011session=wVJ55GTGvspiv2yV#011lip=192.168.1.10#011rip=98.191.108.149#011lport=993#011rport=51902#011local_name=mail.keiththewebguy.com#011ssl_cipher=ECDHE-RSA-AES128-GCM-SHA256#011ssl_cipher_bits=128#011ssl_pfs=KxECDHE#011ssl_protocol=TLSv1.2#011resp=AGtlaXRoQGtlaXRodGhld2ViZ3V5LmNvbQBJY2VjcmVhbS1Db25lXjIx (previous base64 data may contain sensitive data) Jul 5 18:58:47 soho dovecot: auth: Debug: passwd-file(keith(a)keiththewebguy.com,98.191.108.149,<wVJ55GTGvspiv2yV>): Performing passdb lookup Jul 5 18:58:47 soho dovecot: auth: Debug: passwd-file(keith(a)keiththewebguy.com,98.191.108.149,<wVJ55GTGvspiv2yV>): lookup: user=keith(a)keiththewebguy.com file=/etc/dovecot/dovecot-users Jul 5 18:58:47 soho dovecot: auth: passwd-file(keith(a)keiththewebguy.com,98.191.108.149,<wVJ55GTGvspiv2yV>): unknown user Jul 5 18:58:47 soho dovecot: auth: Debug: passwd-file(keith(a)keiththewebguy.com,98.191.108.149,<wVJ55GTGvspiv2yV>): Finished passdb lookup Jul 5 18:58:47 soho dovecot: auth: Debug: auth(keith(a)keiththewebguy.com,98.191.108.149,<wVJ55GTGvspiv2yV>): Auth request finished Jul 5 18:58:49 soho dovecot: auth: Debug: client passdb out: FAIL#0113#011user=keith(a)keiththewebguy.com Jul 5 18:58:49 soho dovecot: imap-login: Debug: SSL alert: close notify Jul 5 18:58:49 soho dovecot: imap-login: Disconnected (auth failed, 3 attempts in 14 secs): user=<keith(a)keiththewebguy.com>, method=PLAIN, rip=98.191.108.149, lip=192.168.1.10, TLS, session=<wVJ55GTGvspiv2yV> Jul 5 18:58:49 soho dovecot: imap-login: Debug: SSL alert: close notify ================== I see the following lines: passwd-file /etc/dovecot/dovecot-users: Read 1 users in 0 secs passwd-file(keith(a)keiththewebguy.com,98.191.108.149,<wVJ55GTGvspiv2yV>): Performing passdb lookup passwd-file(keith(a)keiththewebguy.com,98.191.108.149,<wVJ55GTGvspiv2yV>): lookup: user=keith(a)keiththewebguy.com file=/etc/dovecot/dovecot-users file(keith(a)keiththewebguy.com,98.191.108.149,<wVJ55GTGvspiv2yV>): unknown user passwd-file(keith(a)keiththewebguy.com,98.191.108.149,<wVJ55GTGvspiv2yV>): Finished passdb lookup auth(keith(a)keiththewebguy.com,98.191.108.149,<wVJ55GTGvspiv2yV>): Auth request finished client passdb out: FAIL#0111#011user=keith(a)keiththewebguy.com - - - - dovecot -n : # 2.3.7.2 (3c910f64b): /etc/dovecot/dovecot.conf # Pigeonhole version 0.5.7.2 () # OS: Linux 5.4.0-77-generic x86_64 Ubuntu 20.04.2 LTS ext4 # Hostname: soho.keiththewebguy.com auth_debug = yes auth_debug_passwords = yes auth_mechanisms = plain login auth_verbose = yes mail_debug = yes mail_location = maildir:/var/mail/vhosts/%d/%n mail_privileged_group = mail namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { args = scheme=PLAIN username_format=%u /etc/dovecot/dovecot-users driver = passwd-file } protocols = " imap lmtp pop3" service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0666 user = postfix } } service imap-login { inet_listener imaps { port = 993 ssl = yes } } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0600 user = postfix } } ssl = required ssl_cert = </etc/letsencrypt/live/keiththewebguy.com/fullchain.pem ssl_client_ca_dir = /etc/ssl/certs ssl_dh = # hidden, use -P to show it ssl_key = # hidden, use -P to show it userdb { args = uid=vmail gid=vmail home=/var/mail/vhosts/%d/%n driver = static } verbose_ssl = yes - - - Any thoughts are most welcome!! Thanks in advance!!

2 5

master - master syncronization: *-temp-1-temp-1-temp-2-* recursion
by Heiko Schlittermann 05 Jul '21

05 Jul '21

Hi, I'm using dovecot 2.3.4.1 (f79e8e7e4) (Debian Build) and doing master/master replication. Recently we added a huuge .Archive* folder structure to the items being replicated. And now, suddenly we see new folders with a naming like *-temp-1-temp-1-temp-2-* appearing. This finally lead to infinite recursion until the replicator crashed. I've a theory, but please see below (**) for influence from outside of dovecot: SiteA starts replication of a huge .Archive folder, which doesn't exist on siteB yet A B .Archive ----> .Archive-temp-1 Because it takes ages to sync, the replicator on siteB now sees the new .Archive-temp-1 folder and starts replicating this back to siteA .Archive-temp-1-temp-1 <----- .Archive-temp-1 If now the replicator on siteA hits that new folder, it starts replicating it to site B .Archive-temp-1-temp-1 ----> .Archive-temp-1-temp-1-temp-2 … and so on. Sometimes the digit is "2", or even "3". I didn't check the Dovecot source yet, if the Replicator fails to skip the temporary folders it gets "injected" from the other side. (**) Possible external influence: On siteA a cronjob once per day moves the .Archive* folders to another filesystem and replaces the .Archive* directory with a symlink. This script "touches" the dovecot-uidlist.lock prior to its action (but doesn't check if there is already a lock). Could this mailbox move *behind* the back of the replicator be a reason for the odd behaviour? Additional info: On *both* nodes the config looks like this: doveadm_password = <password> service doveadm { inet_listener { port = 9090 ssl = yes } } replication_max_conns = 16 plugin { mail_replica = tcps:<other site>:9090 } service replicator { process_min_avail = 1 unix_listener replicator-doveadm { mode = 0666 user = dovecot } } service aggregator { fifo_listener replication-notify-fifo { mode = 0666 user = dovecot } unix_listener replication-notify { mode = 0666 user = dovecot } }

1 0

Duplicate users with multiple userdb iteration
by Slavko 05 Jul '21

05 Jul '21

Hi, recently i decided to use quota_over_flag with passwd_file userdb. The main idea is to prevent dovecot (or vmail) user to have write access to file with passwords. To do it, i setup separate userdb as this (SQL userdb is SQLite based, thus the same problem with write): passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } userdb { args = username_format=%u /etc/dovecot/over_quota default_fields = quota_over_flag=1 driver = passwd-file result_internalfail = continue-fail result_success = continue-fail } userdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } For testing i add one user into over_quota file: slavko(a)slavino.eu::::::: With this setting the doveadm user with user in over_quota seems to work: doveadm user slavko(a)slavino.eu field value uid 20000 gid 20000 home /srv/vmail/slavino.eu/slavko mail maildir:~/Maildir quota_over_flag 1 quota_rule *:storage=0M quota2_rule *:storage=0M But the user iteration shows duplicate users: doveadm user '*' slavko(a)slavino.eu slavko(a)slavino.eu ... As we discussed on IRC, it is how iteration works, as it emit users as soon as it meet it, but this doesn't correspond with "multiple userdb are merged" in docs (for iteration). I am surprised by this mainly because the particular userdb has set result_success to "continue-fail" and thus have to set user not found as with any user, which is not in this db. But it seems, that iteration ignores this result. I wrote this as we discussed via IRC, i am not subscribed, thus please CC me. regards -- Slavko http://slavino.sk

1 0

Re: Re: lost mailbox
by Stephane Magnier 05 Jul '21

05 Jul '21

Hi , Thanks Erwan, Yes I did it.. what worries me is, that that instruction lsub "" * seems not to work.. I mean I am not allowed to see it b lsub "" * b NO [NOPERM] No permission to read subscriptions (0.001 + 0.000 secs). So not sure that this is the fault of Thunderbird :-) Thanks for your help

2 1

Pb with Dovecot and visble folders
by Stephane Magnier 04 Jul '21

04 Jul '21

Hi, I've got a problem with my Dovecot installation.. Up to now, that was working fine.but today [root@mbox admin]# telnet localhost 143 Trying ::1... telnet: connect to address ::1: Connection refused Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. * OK [CAPABILITY IMAP4rev1 SASL-IR LOGIN-REFERRALS ID ENABLE IDLE LITERAL+ STARTTLS AUTH=PLAIN] Dovecot ready. a login azt000 xxxxxx a OK [CAPABILITY IMAP4rev1 SASL-IR LOGIN-REFERRALS ID ENABLE IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS THREAD=ORDEREDSUBJECT MULTIAPPEND URL-PARTIAL CATENATE UNSELECT CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS BINARY MOVE SNIPPET=FUZZY PREVIEW=FUZZY LITERAL+ NOTIFY SPECIAL-USE QUOTA] Logged in b list "" * * LIST (\NoInferiors \UnMarked) "/" ssss * LIST (\NoInferiors \UnMarked) "/" 2021-TEST * LIST (\NoInferiors \UnMarked) "/" 2015 * LIST (\NoInferiors \UnMarked) "/" 2020-IT * LIST (\NoInferiors \UnMarked) "/" 2018-PERSO * LIST (\NoInferiors \UnMarked) "/" 2017 * LIST (\NoInferiors \UnMarked) "/" 2020-MARKETING * LIST (\NoInferiors \UnMarked) "/" 2019-AZT * LIST (\NoInferiors \UnMarked) "/" 2019-ADMIN * LIST (\NoInferiors \UnMarked) "/" "2020- PERSO" * LIST (\NoInferiors \UnMarked) "/" sss * LIST (\NoInferiors \UnMarked) "/" 2019-COMPTA * LIST (\NoInferiors \UnMarked) "/" 2019-PERSO * LIST (\NoInferiors \UnMarked) "/" 2017-ADMIN * LIST (\NoInferiors \UnMarked) "/" 2016 * LIST (\NoInferiors \UnMarked) "/" 2020-compta * LIST (\NoInferiors \Marked \Trash) "/" Trash * LIST (\NoInferiors \UnMarked) "/" Archives * LIST (\NoInferiors \UnMarked \Sent) "/" Sent * LIST (\NoInferiors \Marked \Junk) "/" Junk * LIST (\NoInferiors \UnMarked \Drafts) "/" Drafts * LIST (\NoInferiors \UnMarked \Sent) "/" "Sent Messages" * LIST (\NoInferiors \UnMarked) "/" INBOX/2021-AZT * LIST (\NoInferiors \UnMarked) "/" INBOX/2021-WebMEETING * LIST (\NoInferiors \UnMarked) "/" INBOX/2021-zezez * LIST (\NoInferiors \UnMarked) "/" INBOX/2021-PERSO * LIST (\NoInferiors \UnMarked) "/" INBOX/2021-MARKETING * LIST (\NoInferiors \UnMarked) "/" INBOX/2021-COMPTA * LIST (\NoInferiors \UnMarked) "/" INBOX/2021-ADMIN * LIST (\NoInferiors \UnMarked) "/" INBOX/2021-ATV * LIST (\NoInferiors \UnMarked) "/" INBOX/2021-test * LIST (\HasChildren) "/" INBOX b OK List completed (0.016 + 0.000 + 0.015 secs). *c lsub "" ** c NO [NOPERM] No permission to read subscriptions (0.001 + 0.000 secs). If I understand correctly, lsub should see what is visible by the Email client ? How can I let all the folders visible ? [root@mbox dovecot]# cat dovecot-new.conf # 2.3.8 (9df20d2db): /etc/dovecot/dovecot.conf # Pigeonhole version 0.5.8 (b7b03ba2) # OS: Linux 4.18.0-305.3.1.el8.x86_64 x86_64 CentOS Linux release 8.4.2105 nfs4 # Hostname: mbox1.aztgrp.net auth_debug_passwords = yes auth_username_format = %n disable_plaintext_auth = no login_trusted_networks = 177.18.0.0/16 127.0.0.1 ::1 mail_access_groups = mail mail_fsync = always mail_location = mbox:/var/spool2/mail/%u:INBOX=/var/spool/mail/%u:INDEX=/var/indexes/%u:CONTROL=/var/spool/mail-control mail_plugins = " quota" mail_privileged_group = mail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave mbox_very_dirty_syncs = yes mbox_write_locks = fcntl namespace inbox { inbox = yes location = mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox Junk { auto = subscribe special_use = \Junk } mailbox Sent { auto = subscribe special_use = \Sent } mailbox "Sent Messages" { auto = subscribe special_use = \Sent } mailbox Trash { auto = no special_use = \Trash } mailbox virtual/All { auto = no special_use = \All } prefix = } passdb { driver = pam } plugin { quota_grace = 10%% quota_max_mail_size = 100M quota_rule = *:storage=10000M quota_rule2 = Trash:Storage=+100M quota_status_nouser = DUNNO quota_status_overquota = 552 5.2.2 Mailbox is full quota_status_success = DUNNO quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=80%% quota-warning 80 %u sieve = file:~/sieve;active=~/.dovecot.sieve } pop3_uidl_format = %v-%u service auth { unix_listener auth-master { mode = 0666 } } service dict { unix_listener dict { mode = 0600 user = mail } } service imap-login { inet_listener imap { address = * port = 143 } inet_listener imaps { address = * port = 993 ssl = yes } } service lmtp { inet_listener lmtp { address = ::1, 127.0.0.1 port = 24 } } service pop3-login { inet_listener pop3 { address = * port = 110 } inet_listener pop3s { address = * port = 995 ssl = yes } } service quota-warning { executable = script /usr/local/bin/quota-warning.sh unix_listener quota-warning { user = mail } user = dovecot } ssl = required ssl_ca = </etc/mail/ssl/ssl1/STAR_xxxxp_net.ca-bundle ssl_cert = </etc/mail/ssl/ssl1/STAR_xxxp_net.crt ssl_key = # hidden, use -P to show it userdb { driver = passwd } verbose_proctitle = yes protocol lmtp { mail_plugins = autocreate quota acl fts fts_solr zlib mail_log notify sieve } protocol lda { mail_plugins = " quota sieve quota" } protocol imap { mail_max_userip_connections = 80 mail_plugins = " quota quota imap_quota" ssl_cert = </etc/mail/ssl/ssl1/STAR_xxxp_net.crt ssl_key = # hidden, use -P to show it } protocol pop3 { mail_max_userip_connections = 10 mail_plugins = " quota" } protocol submission { mail_max_userip_connections = 10 mail_plugins = " quota" } My dovecot config Thanks and regards,

1 0

Bypass Trash Folder Sometimes.
by dovecot＠ptld.com 04 Jul '21

04 Jul '21

Is there a way, or a config setting, that would allow you to for-reals delete an email from the inbox instead of sending it to the Trash folder? Not always, the default behavior should still send deleted emails to the trash folder, but on a per case bases be able to just delete an email without it going to the trash folder. Same like how the windows desktop works. If you Delete a file on your desktop it goes to the recycle bin. However if you do Shift + Delete the file gets deleted without going to the recycle bin.

3 3

How to use xapian with non-text attachments
by André Rodier 03 Jul '21

03 Jul '21

Hello, I am developing a hosting platform on Debian Bullseye, with Dovecot amongst other tools. I am trying to use the xapian full test search plugin, but I can see the attachments are skipped: This is what I have in the logs when running the indexing in verbose mode: ----------------------------------------------------------------------- doveadm(camille): Info: FTS Xapian: fts_backend_xapian_check_access doveadm(camille): Info: FTS Xapian: Memory stats : Used = 56 MB, Free = 66 MB doveadm(camille): Info: FTS Xapian: fts_backend_xapian_index_hdr doveadm(camille): Info: FTS Xapian: fts_backend_xapian_query doveadm(camille): Info: FTS Xapian: Query= uid:"44" doveadm(camille): Info: FTS Xapian: Ngram(S) -> 63 items (total 0 KB) doveadm(camille): Info: FTS Xapian: fts_backend_xapian_update_unset_build_key doveadm(camille): Info: FTS Xapian: fts_backend_xapian_update_set_build_key doveadm(camille): Info: FTS Xapian: New part (Header=Message- Id,Type=(null),Disposition=(null)) doveadm(camille): Info: FTS Xapian: fts_backend_xapian_update_build_more doveadm(camille): Info: FTS Xapian: fts_backend_xapian_check_access doveadm(camille): Info: FTS Xapian: Memory stats : Used = 56 MB, Free = 66 MB doveadm(camille): Info: FTS Xapian: fts_backend_xapian_index_hdr doveadm(camille): Info: FTS Xapian: fts_backend_xapian_query doveadm(camille): Info: FTS Xapian: Query= uid:"44" doveadm(camille): Info: FTS Xapian: Ngram(XMID) -> 4 items (total 0 KB) doveadm(camille): Info: FTS Xapian: fts_backend_xapian_update_unset_build_key doveadm(camille): Info: FTS Xapian: fts_backend_xapian_update_set_build_key doveadm(camille): Info: FTS Xapian: New part (Header=X- Mailer,Type=(null),Disposition=(null)) doveadm(camille): Info: FTS Xapian: Unknown header (indexing) 'xmailer' doveadm(camille): Info: FTS Xapian: fts_backend_xapian_update_set_build_key doveadm(camille): Info: FTS Xapian: New part (Header=MIME- Version,Type=(null),Disposition=(null)) doveadm(camille): Info: FTS Xapian: Unknown header (indexing) 'mimeversion' doveadm(camille): Info: FTS Xapian: fts_backend_xapian_update_set_build_key doveadm(camille): Info: FTS Xapian: New part (Header=Content- Type,Type=(null),Disposition=(null)) doveadm(camille): Info: FTS Xapian: Unknown header (indexing) 'contenttype' doveadm(camille): Info: FTS Xapian: fts_backend_xapian_update_set_build_key doveadm(camille): Info: FTS Xapian: New part (Header=Authentication- Results,Type=(null),Disposition=(null)) doveadm(camille): Info: FTS Xapian: Unknown header (indexing) 'authenticationresults' doveadm(camille): Info: FTS Xapian: fts_backend_xapian_update_set_build_key doveadm(camille): Info: FTS Xapian: New part (Header=X-AV- Checked,Type=(null),Disposition=(null)) doveadm(camille): Info: FTS Xapian: Unknown header (indexing) 'xavchecked' doveadm(camille): Info: FTS Xapian: fts_backend_xapian_update_set_build_key doveadm(camille): Info: FTS Xapian: New part (Header=Content- Type,Type=(null),Disposition=(null)) doveadm(camille): Info: FTS Xapian: Unknown header (indexing) 'contenttype' doveadm(camille): Info: FTS Xapian: fts_backend_xapian_update_set_build_key doveadm(camille): Info: FTS Xapian: New part (Header=(null),Type=text/plain,Disposition=(null)) doveadm(camille): Info: FTS Xapian: fts_backend_xapian_update_build_more doveadm(camille): Info: FTS Xapian: fts_backend_xapian_update_unset_build_key doveadm(camille): Info: FTS Xapian: fts_backend_xapian_update_set_build_key doveadm(camille): Info: FTS Xapian: New part (Header=Content- Type,Type=(null),Disposition=(null)) doveadm(camille): Info: FTS Xapian: Unknown header (indexing) 'contenttype' doveadm(camille): Info: FTS Xapian: fts_backend_xapian_update_set_build_key doveadm(camille): Info: FTS Xapian: New part (Header=Content- Description,Type=(null),Disposition=(null)) doveadm(camille): Info: FTS Xapian: Unknown header (indexing) 'contentdescription' doveadm(camille): Info: FTS Xapian: fts_backend_xapian_update_set_build_key doveadm(camille): Info: FTS Xapian: New part (Header=Content- Disposition,Type=(null),Disposition=(null)) doveadm(camille): Info: FTS Xapian: Unknown header (indexing) 'contentdisposition' doveadm(camille): Info: FTS Xapian: fts_backend_xapian_update_set_build_key doveadm(camille): Info: FTS Xapian: New part (Header=Content-Transfer- Encoding,Type=(null),Disposition=(null)) doveadm(camille): Info: FTS Xapian: Unknown header (indexing) 'contenttransferencoding' doveadm(camille): Info: FTS Xapian: fts_backend_xapian_update_set_build_key doveadm(camille): Info: FTS Xapian: New part (Header=(null),Type=text/csv,Disposition=attachment; filename="file.csv") doveadm(camille): Info: FTS Xapian: Skipping part of type 'text/csv' and disposition 'attachment; filename="file.csv"' doveadm(camille): Info: FTS Xapian: fts_backend_xapian_update_set_mailbox doveadm(camille): Info: FTS Xapian: Unset box 'INBOX' (c0d4e304584e5460dae30000075d7e67) doveadm(camille): Info: FTS Xapian: fts_backend_xapian_oldbox doveadm(camille): Info: FTS Xapian: Done indexing 'INBOX' (c0d4e304584e5460dae30000075d7e67) (13 msgs in 261 ms, rate: 49.8) doveadm(camille): Info: FTS Xapian: fts_backend_xapian_release (unset_box) doveadm(camille): Info: FTS Xapian: Committed 'unset_box' in 17 ms doveadm(camille): Info: FTS Xapian: Box is empty doveadm(camille): Info: FTS Xapian: fts_backend_xapian_update_deinit (/home/users/camille/mails/indexes/xapian-indexes) doveadm(camille): Info: FTS Xapian: fts_backend_xapian_release (update_deinit) doveadm(camille): Info: FTS Xapian: Committed 'update_deinit' in 0 ms doveadm(camille): Info: FTS Xapian: Deinit /home/users/camille/mails/indexes/xapian-indexes) ----------------------------------------------------------------------- Especially thos line: doveadm(camille): Info: FTS Xapian: Skipping part of type 'text/csv' and disposition 'attachment; filename="file.csv"' I have seen this as a bug on fts-xapian: https://github.com/grosjo/fts-xapian/issues/68 Which then references a PR on Dovecot core itself: https://github.com/dovecot/core/pull/155 Any idea on how to use xapian with non-text attachments ? Thanks a lot for your help! André

2 2