- dovecot - dovecot.org

Re: [Dovecot] Import from Evolution
by Wojciech Puchar 23 Jun '12

23 Jun '12

sorry for replying through that links but - as you may see - replying to Jonathan will not work. If AT&T have such strange policy then i am just sorry. It sings the beginning of end of open internet if more companies will start to do this, and result in few huge corporations handling everything. Not happy world to live. On Sat, 23 Jun 2012, Jonathan Ryshpan wrote: > On Sat, 2012-06-23 at 10:32 +0200, Wojciech Puchar wrote: >> For Jonathan Ryshpan: >> >> for no obvious reason my IP is blocked at AT&T mail server you use. > > I'm not sure what's going on, but I suspect the problem is this: Many US > mail servers refuse to accept mail from any servers that they have not > approved; if mail is coming direct from you to ATT, rather than via some > large ISP, it will likely be refused. This is supposed to reduce the > amount of spam (fat chance). > > Thanks for your reply - jon > > >

1 0

[Dovecot] cumulative userdb ?
by Benoit Branciard 22 Jun '12

22 Jun '12

in Dovecot 2.0, is it possible to have kind of "cumulative" multiple userdb ? that is, for all users: - extract some attributes (let's say: uid, gid, home) from a first userdb (Passwd for example), - an extract some other attributes (mail for example, but overwriting those from the first userdb in case of redundancy) from a second userdb (LDAP for example) ? This is *different* from the "multiple databases" setup described in http://wiki2.dovecot.org/Authentication/MultipleDatabases, where it is meant as "failover": the second database is looked up only if the user isn't found in the first database. -- Benoit BRANCIARD Service InfraStructures (SIS) - Direction du Système d'Information (DSI) Université Paris 1 Panthéon-Sorbonne Centre Pierre Mendès France B 406 - 90, rue de Tolbiac - 75634 Paris cedex 13 - France Tél : +33 1 44 07 89 68 - Fax : +33 1 44 07 89 66 Accueil tél. : +33 1 44 07 89 65 Assistance : assistance-dsi(a)univ-paris1.fr Web : http://dsi.univ-paris1.fr -- Ce message a ete verifie par MailScanner pour des virus ou des polluriels et rien de suspect n'a ete trouve.

2 1

[Dovecot] Dovecot LDA, Offlineimap and Sieve
by Johnny 22 Jun '12

22 Jun '12

Hi, I am trying to st up Offlineimap to use Dovecots LDA to be able to use Sieve for mail filtering, but am not sure how to get this working. I think the right way would be to use 'preauthtunnel' in .offlineimaprc and try the setup below, which doesn't work. ,----.offlineimaprc | [Repository LocalRepository] | type = IMAP | preauthtunnel = ssh -q localhost '/usr/libexec/dovecot/deliver -d myloginid' `---- If I go via the network card, the snch is fine, but Sieve can't be used? ,---- | [Repository LocalRepository] | type = IMAP | preauthtunnel = MAIL=maildir:$HOME/Maildir/myMailDir /usr/libexec/dovecot/deliver -d mylogonid | remotehost = localhost | port = 143 | remoteuser = mylogonid | remotepass = mypassword `---- Has anyone got any tips on how to get offlineimap to send mail to Dovecot in a way that Siev3e can be used? thanks! -- Johnny

2 2

[Dovecot] LDA vs maildrop... LDA *and* maildrop?
by email builder 22 Jun '12

22 Jun '12

We're considering a move from Courier to Dovecot. So far, looks like it's not too bad, but the most challenging obstacle is what to do about our local delivery. Factors: 1. we use a lot of maildrop "features" that are impossible in sieve without piping to an external program (would rather not re-write our working maildrop scripts in another language) 2. would love to try dbox 3. we use IMAP/Maildir++ quotas (looks like with a little finesse it's possible to get maildrop and dovecot to play nice on this account, yes?) I saw it suggested to just call LDA from maildrop for any maildrop "to" commands (hmmm, what about "cc"?) here: http://article.gmane.org/gmane.mail.imap.dovecot/56120 How much overhead will this take? Would it be possible or advisable to use LMTP instead if that would help? Is this idea just too crazy?

2 4

[Dovecot] Manual manipulation of Sieve files
by email builder 22 Jun '12

22 Jun '12

We have some scripts that take care of some tasks when creating new email accounts, such as creating some default mail filter rules. I know Sieve scripts are plain text files, but need to be compiled for use. I see that you can use seivec to compile scripts manually, which can help me create .dovecot.svbin which can be placed where needed and permissioned correctly. But a couple questions: * Sieve has the concept of an active script - is this merely whatever is compiled into the .dovecot.svbin file? * Does dovecot (managesieve) do any other housekeeping when a user sieve script is installed and set as the active script? I would need to replicate this manually. * If the default script is always the same (sorry, for us, the solution isn't global scripts), would it work to compile that script once, keep the compiled version somewhere and merely copy it into the correct place for a new user? Are there issues with this? * Should we always have the plain text version along with the compiled one for proper managesieve operation going forward (users can edit their sieve scripts) Thank you

2 2

[Dovecot] Dovecot proxy/director and mail pop3/imap backend service on same server
by Aerion Stevens 22 Jun '12

22 Jun '12

Hi all, I am interested in running a Dovecot Proxy(with Director) on the same server as the main Dovecot IMAP/POP3 service. I have a basic Proxy/Director configuration working, however I am struggling with getting the Proxy and IMAP/POP3 service to coexist on the same server. I plan to use three IMAP/POP3 servers with a NFS/maildir backend, and I am playing with Dovecot 2.1.5 at the moment. I have two seperate configurations, one for the Proxy/Director and one for the Dovecot IMAP/POP3 "mail backend servers". For this to work my thoughts are that I will need to run the Proxy/Director imap/pop3 login process on the standard ports 143, 110, 993, 995 and for the Dovecot IMAP/POP3 mail backend service running on the same server will need to use different ports (I decided to be 9143, 9110, 9993, 9995 for example). How do I tell the director to proxy incoming imap/pop3 connection to the mail backend servers running on ports 9143, 9110, 9993, 9995 rather than the default imap/pop3 ports? Using the default ports will clearly cause loops. Can anyone kindly provide an example snippet of config that tells the director to use different port for IMAP and POP3 proxy? I have so far found the following pages helpful to what I am working on: http://wiki2.dovecot.org/PasswordDatabase/ExtraFields/Proxy http://wiki2.dovecot.org/PasswordDatabase/ExtraFields http://wiki2.dovecot.org/Director Cheers, Aerion.

2 1

[Dovecot] GlusterFS + Dovecot
by Romer Ventura 22 Jun '12

22 Jun '12

Hello, Has anyone used GlusterFS as storage file system for dovecot or any other email system..? It says that it can be presented as a NFS, CIFS and as GlusterFS using the native client, technically using the client would allow the machine to read and write to it, therefore, I think that Dovecot would not care about it. Correct? Anyone out there used this setup?? Thanks.

5 4

[Dovecot] how to use new style namespace for INBOX
by ml 21 Jun '12

21 Jun '12

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 dear honorable doctor timo reading the list I saw appear a new style for the "writing of INBOX". namely this example mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = I do not know how to use it can you help me now is my config ~]# /usr/sbin/dovecot -n # 2.1.7: /etc/dovecot/dovecot.conf # OS: Linux 2.6.34.6-xxxx-grs-ipv6-32 i686 CentOS release 5.8 (Final) auth_mechanisms = plain login base_dir = /var/run/dovecot/ lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes listen = [::] log_path = /var/log/maillog log_timestamp = %Y-%m-%d %H:%M:%S login_log_format_elements = user=<%u> method=%m rip=%r lip=%l %c mail_debug = yes mail_location = maildir:~/Maildir mail_max_userip_connections = 30 mail_plugins = " quota trash zlib" mailbox_list_index = yes maildir_broken_filename_sizes = yes managesieve_notify_capability = mailto managesieve_sieve_capability = comparator-i;octet comparator-i;ascii-casemap fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date spamtest spamtestplus virustest namespace { inbox = yes location = prefix = separator = . } passdb { driver = pam } plugin { autocreate = Trash autocreate2 = Junk autocreate3 = Sent autocreate4 = Drafts autosubscribe = Trash autosubscribe2 = Junk autosubscribe3 = Sent autosubscribe4 = Drafts deleted_to_trash_folder = Trash plugin = $mail_plugins autocreate managesieve sieve quota quota = maildir:User quota quota_exceeded_message = Quota exceeded, please go to http://www.fakessh.eu/over_quota_help.html for instructions on how to fix this. quota_rule = *:storage=10GB quota_rule2 = Trash:storage=+10% quota_rule3 = Spam:storage=+20% quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=80%% quota-warning 80 %u sieve = ~/.dovecot.sieve sieve_before = /var/sieve-scripts/roundcube.sieve sieve_dir = ~/sieve sieve_global_path = whatever trash = /etc/dovecot/dovecot-trash.conf.ext zlib_save = bz2 zlib_save_level = 9 } protocols = sieve imap pop3 service anvil { client_limit = 6000 } service auth { client_limit = 6000 process_limit = 1 unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0600 user = postfix } unix_listener auth-master { mode = 0666 } unix_listener auth-userdb { mode = 0666 } vsz_limit = 64 M } service imap-login { client_limit = 0 inet_listener imap { port = 0 } inet_listener imaps { address = * , [::] port = 993 } process_limit = 1024 service_count = 1 vsz_limit = 64 M } service imap { process_limit = 1024 process_min_avail = 0 service_count = 1 vsz_limit = 64 M } service managesieve-login { inet_listener managesieve-login { address = * , [::] port = 2000 } process_limit = 1 vsz_limit = 64 M } service pop3-login { inet_listener pop3 { port = 0 } inet_listener pop3s { address = * , [::] port = 995 } process_limit = 1 vsz_limit = 64 M } service quota-warning { executable = script /usr/local/bin/quota-warning.sh unix_listener quota-warning { user = mail } user = dovecot } ssl_ca = </etc/pki/tls/certs/class3.crt ssl_cert = </etc/pki/tls/certs/ks37777.kimsufi.com.cert ssl_key = </etc/pki/tls/private/ks37777.kimsufi.com.key ssl_verify_client_cert = yes userdb { driver = passwd } userdb { driver = passwd } version_ignore = yes protocol imap { imap_client_workarounds = delay-newmail tb-extra-mailbox-sep imap_max_line_length = 64 k mail_plugins = " quota trash zlib autocreate quota imap_quota imap_zlib zlib" } protocol pop3 { mail_plugins = autocreate quota quota autocreate deleted_to_trash zlib pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_logout_format = top=%t/%p, retr=%r/%b, del=%d/%m, size=%s } protocol lda { hostname = ks37777.kimsufi.com info_log_path = log_path = mail_plugins = autocreate sieve quota postmaster_address = postmaster(a)fakessh.eu sendmail_path = /usr/lib/sendmail } protocol sieve { managesieve_implementation_string = dovecot managesieve_logout_format = bytes ( in=%i : out=%o ) managesieve_max_line_length = 65536 } - -- http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xC2626742 gpg --keyserver pgp.mit.edu --recv-key C2626742 http://urlshort.eu fakessh @ http://gplus.to/sshfake http://gplus.to/sshswilting http://gplus.to/john.swilting https://lists.fakessh.eu/mailman/ This list is moderated by me, but all applications will be accepted provided they receive a note of presentation -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.14 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAk/iZKsACgkQNgqL0sJiZ0LNvgCgwO5+e7zu+OfTqOWdtSpxzqCL 6ZgAnRuEtAtALE9zUfxIb9zN/5fhmy3t =rF7F -----END PGP SIGNATURE-----

3 2

[Dovecot] dovecot 2.1.5 performance
by Angel L. Mateo 21 Jun '12

21 Jun '12

Hello, I'm migrating from 1.1.16 running in 4 debian lenny servers virtualized with xenserver and 1 core and 5GB of RAM to 2.1.5 running in 4 ubuntu 12.04 servers with 6 cpu cores and 16GB of RAM virtualized with VMWare, but I'm having lots a performance problems. I don't think that virtualization platform could be the problem, because the new servers running in xenserver has the same problems than running in vmware. I have about 70000 user accounts, most of them without real activity (they are students who doesn't read his email or have its account redirected to other provider). I have about 700-1000 concurrent imap connections. I have storage in nfs (nfsv3, the nfs server is a celerra), but indexes are in local filesystems (each server has its own index fs). Mailboxes are in maildir format. Old servers and actual director servers are load balanced with an radware appdirector load balancer (the new backend servers don't need to be balanced because I'm using a director farm) In the old platform I have scenario number 2 described at http://wiki2.dovecot.org/NFS, but in the new ones I have a director proxy directing all connections from each user to the same server (I don't specify any server for the user, director selects it according to the hash algorithm it has). Some doubts I have for the recommended in that url: * mmap_disable: both single and multi server configurations have mmap_disable=yes but in index file section says that you need it if you have your index files stored in nfs. I have it stored locally. Do I need mmap_disable=yes? What it's the best? * dotlock_use_excl: it is set to no in both configurations, but the comment says that it is needed only in nfsv2. Since I have nfs3, I have it set it to yes. * mail_nfs_storage: In single server is set to no, but in multi server it set to yes. Since I have a director in front of my backend server, what is the recommended? With this configuration, when I have a few connections (about 300-400 imap connections) everything is working fine, but when I disconnect the old servers and direct all my users' connections to the new servers I have lot of errors. server loads increments to over 300 points, with a very high io wait. With atop, I could see that of my 6 cores, I have one with almost 100% waiting for i/o and the other with almost 100% idle, but load of the server is very, very high. With the old servers, I have performance problems, access to mail is slow, but it works. But with the new ones it doesn't work at all. Any idea? -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información _o) y las Comunicaciones Aplicadas (ATICA) / \\ http://www.um.es/atica _(___V Tfo: 868887590 Fax: 868888337

4 8

[Dovecot] public namespace
by Daniel Fischer 21 Jun '12

21 Jun '12

Hello, dovecot -n # 2.0.18: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-2-amd64 x86_64 Debian wheezy/sid mail_gid = 5000 mail_location = maildir:~:INDEX=/var/mail/indexes/%d/%n mail_privileged_group = vmail mail_uid = 5000 namespace { hidden = no inbox = yes list = yes location = prefix = separator = / subscriptions = yes type = private } namespace { list = children location = maildir:/var/mail/vhosts/%d/public:INDEX=/var/mail/indexes/%d/%n/public prefix = Public/ separator = / subscriptions = no type = public } i´m a little bit confused but I hope I find help here. The user mailboxes work perfectly just the public mailbox is a little bit tricky I expect that all public maildirs be placed under /var/mail/vhosts/%d/public. They are created by defining a public namespace, under which all the shared mailboxes are. For those special users, I have set the maillocation via passwd file to /%d/public/%n, all other users have /%d/%n. So we have following folder structure \public \public\.info \public\.lager \public\.buchhaltung And so on Thats works fine, but with subfolder start the problems. When the info-user loggs on and creates a subfolder under his INBOX(called hust2) then no other people can see this. Otherside, if a normal user creates a folder in public folder info(called hust), the info user can´ t see this one. If I look to filesystem, the reason is clear: %d/public/.info# ls -la insgesamt 32 drwx--S---+ 2 vmail vmail 6 Jun 19 11:50 cur -rwxrwx---+ 1 vmail vmail 51 Jun 21 09:50 dovecot-uidlist -rw-rw----+ 1 vmail vmail 8 Jun 19 11:51 dovecot-uidvalidity -r--r-----+ 1 vmail vmail 0 Jun 19 11:50 dovecot-uidvalidity.4fe04b06 drwx--S---+ 5 vmail vmail 78 Jun 19 11:54 .INBOX.hust2 drwx--S---+ 2 vmail vmail 6 Jun 19 11:50 new -rw-rw----+ 1 vmail vmail 18 Jun 19 11:51 subscriptions drwx--S---+ 2 vmail vmail 6 Jun 19 11:50 tmp drwx--S---+ 5 vmail vmail 78 Jun 21 09:51 .Trash %d/public# ls -la insgesamt 16 -rw-rw----+ 1 vmail vmail 8 Jun 19 11:51 dovecot-uidvalidity -r--r-----+ 1 vmail vmail 0 Jun 19 11:51 dovecot-uidvalidity.4fe04b36 drwx--S---+ 7 vmail vmail 4096 Jun 21 09:50 .info drwx--S---+ 5 vmail vmail 78 Jun 21 09:51 .info.hust A look to the info mailbox makes it clear: info@BLABLA \INBOX \hust2 >create by info user in his mailbox \Trash \Public \info >his own public share \hust >create by other user in public folder What I need is: %d/public/lager/cur %d/public/lager/new %d/public/lager/tmp %d/public/lager/.foo %d/public/lager/.foo.bar %d/public/ info /cur %d/public/ info /new %d/public/ info /tmp %d/public/info/.hust %d/public/info/.hust.deeperhust %d/public/info/.hust2 All public maildirs under /%d/public/%n Must I create a namespace for all public maildirs?: namespace { location = maildir:/var/mail/vhosts/%d/public/info } namespace { location = maildir:/var/mail/vhosts/%d/public/lager } I can´ t figure out on my own, please give me an explanation. Thanks for soon comment. Daniel

1 0