- dovecot - dovecot.org

Re: [Dovecot] expire-tool stops on first box with nothing to expire in it
by Joseph Tam 31 Jul '12

31 Jul '12

Timo Sirainen writes: > > In practice, if this query is done on a periodic interval (e.g. daily), > > the date.saved will be roughly correct, and is usable as an age test > > for expungement. > > > > Is there a way to force this value to be cached when the client actually > > saves or moves a message? > > Done for save: http://hg.dovecot.org/dovecot-2.1/rev/c598f76eeeed > > Fixed copy: http://hg.dovecot.org/dovecot-2.1/rev/b13b8267999d > > It still doesn't add it to cache if it's not already cached in both the > source and destination mailbox, but usually it should be after initial > doveadm run. Thanks, Timo. Joseph Tam <jtam.home(a)gmail.com>

1 0

Re: [Dovecot] Enable ACL for master user
by punit_j 30 Jul '12

30 Jul '12

Hi , No one has a solution to this ? Regards, Punit

1 0

[Dovecot] SSL Warnings in Debug Logs
by Asai 29 Jul '12

29 Jul '12

Greetings, In doing some debugging of authentication issues, I'm wondering if these SSL warnings are anything to be investigating? Jul 24 11:23:16 triata dovecot: imap-login: Warning: SSL: where=0x10, ret=1: before/accept initialization [192.168.70.101] Jul 24 11:23:16 triata dovecot: imap-login: Warning: SSL: where=0x2001, ret=1: before/accept initialization [192.168.70.101] Jul 24 11:23:16 triata dovecot: imap-login: Warning: SSL: where=0x2002, ret=-1: SSLv2/v3 read client hello A [192.168.70.101] Jul 24 11:23:16 triata dovecot: imap-login: Warning: SSL: where=0x2001, ret=1: SSLv3 read client hello A [192.168.70.101] Jul 24 11:23:16 triata dovecot: imap-login: Warning: SSL: where=0x2001, ret=1: SSLv3 write server hello A [192.168.70.101] Jul 24 11:23:16 triata dovecot: imap-login: Warning: SSL: where=0x2001, ret=1: SSLv3 write certificate A [192.168.70.101] Jul 24 11:23:16 triata dovecot: imap-login: Warning: SSL: where=0x2001, ret=1: SSLv3 write key exchange A [192.168.70.101] Jul 24 11:23:16 triata dovecot: imap-login: Warning: SSL: where=0x2001, ret=1: SSLv3 write server done A [192.168.70.101] Jul 24 11:23:16 triata dovecot: imap-login: Warning: SSL: where=0x2001, ret=1: SSLv3 flush data [192.168.70.101] Jul 24 11:23:16 triata dovecot: imap-login: Warning: SSL: where=0x2002, ret=-1: SSLv3 read client certificate A [192.168.70.101] Jul 24 11:23:16 triata dovecot: imap-login: Warning: SSL: where=0x2002, ret=-1: SSLv3 read client certificate A [192.168.70.101] Jul 24 11:23:16 triata dovecot: imap-login: Warning: SSL: where=0x2001, ret=1: SSLv3 read client key exchange A [192.168.70.101] Jul 24 11:23:16 triata dovecot: imap-login: Warning: SSL: where=0x2001, ret=1: SSLv3 read finished A [192.168.70.101] Jul 24 11:23:16 triata dovecot: imap-login: Warning: SSL: where=0x2001, ret=1: SSLv3 write change cipher spec A [192.168.70.101] Jul 24 11:23:16 triata dovecot: imap-login: Warning: SSL: where=0x2001, ret=1: SSLv3 write finished A [192.168.70.101] Jul 24 11:23:16 triata dovecot: imap-login: Warning: SSL: where=0x2001, ret=1: SSLv3 flush data [192.168.70.101] Jul 24 11:23:16 triata dovecot: imap-login: Warning: SSL: where=0x20, ret=1: SSL negotiation finished successfully [192.168.70.101] Jul 24 11:23:16 triata dovecot: imap-login: Warning: SSL: where=0x2002, ret=1: SSL negotiation finished successfully [192.168.70.101] [root@triata ~]# doveconf -n # 2.0.14: /etc/dovecot/dovecot.conf # OS: Linux 2.6.18-194.32.1.el5xen x86_64 CentOS release 5.5 (Final) ext3 auth_debug = yes auth_debug_passwords = yes auth_mechanisms = plain login auth_verbose = yes auth_verbose_passwords = plain mail_debug = yes mail_home = /vmail/%d/%n/home mail_location = maildir:/vmail/%d/%n managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date namespace { inbox = yes location = prefix = separator = / type = private } passdb { args = /etc/dovecot/dovecot-mysql.conf driver = sql } plugin { mail_log_fields = uid box msgid size from sieve = /vmail/%d/%n/sievescript } protocols = imap pop3 lmtp sieve sieve service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-master { group = vmail mode = 0660 user = vmail } unix_listener auth-userdb { mode = 0660 user = vmail } user = root } service imap-login { process_min_avail = 3 service_count = 0 vsz_limit = 0 } service managesieve-login { inet_listener sieve { port = 4190 } process_min_avail = 0 service_count = 1 vsz_limit = 64 M } ssl_cert = </etc/pki/dovecot/certs/smtpd.pem ssl_key = </etc/pki/dovecot/private/smtpd.pem userdb { args = /etc/dovecot/dovecot-mysql.conf driver = sql } verbose_ssl = yes protocol lda { hostname = triata.globalchangemultimedia.net mail_plugin_dir = /usr/lib64/dovecot/ mail_plugins = sieve postmaster_address = postmaster(a)globalchangemultimedia.net } protocol imap { imap_idle_notify_interval = 24 mins mail_max_userip_connections = 20 } protocol sieve { mail_max_userip_connections = 10 managesieve_implementation_string = Dovecot Pigeonhole managesieve_logout_format = bytes=%i/%o managesieve_max_line_length = 65536 } -- Asai

2 2

[Dovecot] mysql auth failover failing
by Paul B. Henson 29 Jul '12

29 Jul '12

We are running dovecot to provide authentication for postfix, using two mysql servers in a multi-master replication set as the password source: ---------------------------------------- # 2.0.13: /etc/dovecot/dovecot.conf # OS: Linux 2.6.37-gentoo-r4 x86_64 Gentoo Base System release 2.0.2 auth_mechanisms = plain login digest-md5 cram-md5 auth_verbose = yes passdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } protocols = none service auth-worker { unix_listener auth-worker { user = postfix } user = $default_internal_user } service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } user = postfix } ssl = no userdb { driver = passwd } --------------------------------------- With an sql config of: ------------------------- driver = mysql connect = host=mysql-1.unx.csupomona.edu host=mysql-2.unx.csupomona.edu dbname=idmgmt user=postfix password=XXXXXXX default_pass_scheme = PLAIN password_query = XXXXXXXXX ------------------------- According to the sample SQL configuration file "HA / round-robin load-balancing is supported by giving multiple host settings, like: host=sql1.host.org host=sql2.host.org". However, as far as I can tell dovecot only connects to the first listed host, and processes all queries through it, there does not appear to be any load-balancing going on. That's not necessarily a dealbreaker; however, high-availability does not appear to be working either. If I shutdown the first mysql server, dovecot starts to log connection failures: Sep 9 15:47:34 tweak dovecot: auth: Error: mysql(mysql-1.unx.csupomona.edu): Connect failed to database (idmgmt): Can't connect to MySQL server on 'mysql-1.unx.csupomona.edu' (111) - waiting for 1 seconds before retry Sep 9 15:47:39 tweak dovecot: auth: Error: mysql(mysql-1.unx.csupomona.edu): Connect failed to database (idmgmt): Can't connect to MySQL server on 'mysql-1.unx.csupomona.edu' (111) - waiting for 25 seconds before retry And postfix starts to fail authentications: Sep 9 15:47:35 tweak postfix/smtpd[5119]: warning: bender.iitsys.csupomona.edu[134.71.250.134]: SASL DIGEST-MD5 authentication failed: Connection lost to authentication server Now and again the authentication process dies: Sep 9 15:47:39 tweak dovecot: auth: Panic: file auth-request-handler.c: line 697 (auth_request_handler_flush_failures): assertion failed: (auth_request->state == AUTH_REQUEST_STATE_FINISHED) Sep 9 15:47:39 tweak dovecot: auth: Error: Raw backtrace: /usr/lib64/dovecot/libdovecot.so.0(+0x3f71a) [0x7f25822ca71a] -> /usr/lib64/dovecot/libdovecot.so.0(+0x3f766) [0x7f25822ca766] -> /usr/lib64/dovecot/libdovecot.so.0(+0x198ca) [0x7f25822a48ca] -> dovecot/auth() [0x4137f4] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_handle_timeouts+0xd4) [0x7f25822d5fe4] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_handler_run+0x5b) [0x7f25822d6bcb] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_run+0x28) [0x7f25822d5c48] -> /usr/lib64/dovecot/libdovecot.so.0(master_service_run+0x13) [0x7f25822c3de3] -> dovecot/auth(main+0x2be) [0x4179de] -> /lib64/libc.so.6(__libc_start_main+0xfd) [0x7f2581898bbd] -> dovecot/auth() [0x40bdc9] Sep 9 15:47:39 tweak dovecot: master: Error: service(auth): child 4154 killed with signal 6 (core dumps disabled) Requests start to pile up: Sep 9 15:51:46 tweak dovecot: auth: Warning: auth workers: Auth request was queued for 25 seconds, 45 left in queue Lookups time out: Sep 9 15:57:22 tweak dovecot: auth: Error: auth worker: Aborted request: Lookup timed out This occasionally pops up: Sep 9 15:58:38 tweak dovecot: auth: Fatal: net_connect_unix(auth-worker) failed: Resource temporarily unavailable And sometimes the auth process gets temporarily disabled: Sep 9 15:58:57 tweak dovecot: master: Error: service(auth): command startup failed, throttling Resulting in more postfix authentication failures: Sep 9 15:58:57 tweak postfix/smtpd[6531]: warning: bender.iitsys.csupomona.edu[134.71.250.134]: SASL DIGEST-MD5 authentication failed: Sep 9 15:59:08 tweak postfix/smtpd[6551]: fatal: no SASL authentication mechanisms To the point where postfix also temporarily throttles smtpd: Sep 9 15:59:21 tweak postfix/master[6526]: warning: /usr/lib64/postfix/smtpd: bad command startup -- throttling Resulting in a complete unavailability of smtp service, not just unavailability of authenticated services. I don't think all authentications fail during the scenario, but I think the majority do. Based on the network traffic, dovecot is almost continuously trying to connect to the first listed server. It sometimes connects to the second listed server, but when it does, the connection does not persist, it goes away almost immediately. Ideally, I would like no authentications to fail if one of the MySQL servers is unavailable. If a few fail just when the server dies, that would be undesirable but acceptable as long as they do not continuously fail while the server is down. Am I doing something wrong? Does the example sql config have incorrect information? We were previously running dovecot 1.2.11, we just recently upgraded to 2. In the previous version, we actually had two different passdb's configured, each one listing only one of the mysql servers. I seem to recall that was the recommendation at the time for high-availability. When that configuration did not seem to work under version 2, I found an updated recommendation to list both servers in the same passdb, which also does not appear to work correctly. I actually went back and tested the older version, and determined it seemed to work okay in the case where the server was up but the service was down, and connections were refused, but also failed a large number of authentication attempts when the server was completely down and connections were timing out. Thanks much... -- Paul B. Henson | (909) 979-6361 | http://www.csupomona.edu/~henson/ Operating Systems and Network Analyst | henson(a)csupomona.edu California State Polytechnic University | Pomona CA 91768

5 19

[Dovecot] Enable ACL for master user
by punit_j 29 Jul '12

29 Jul '12

Hi Team, I have dovecot setup and I have enabled master User login in dovecot.conf file as below :- auth_master_user_separator = * passdb { driver = passwd-file args = /etc/dovecot/passwd.masterusers master = yes pass = yes } passdb { driver = shadow } userdb { driver = passwd } and craeted file. I can login to the user but what I see after login is : - Trying 0.0.0.0... Connected to 0. Escape character is '^]'. * OK [CAPABILITY IMAP4rev1 SASL-IR SORT THREAD=REFERENCES MULTIAPPEND UNSELECT LITERAL+ IDLE CHILDREN NAMESPACE LOGIN-REFERRALS UIDPLUS LIST-EXTENDED I18NLEVEL=1 STARTTLS AUTH=PLAIN] Dovecot ready. a login user*masteruser password a OK Logged in. a list "" * * LIST (\HasNoChildren) "." "Trash" * LIST (\Unmarked) "." "INBOX" a OK List completed. However when I login as a normal user I see this : - Connected to 0. Escape character is '^]'. * OK [CAPABILITY IMAP4rev1 SASL-IR SORT THREAD=REFERENCES MULTIAPPEND UNSELECT LITERAL+ IDLE CHILDREN NAMESPACE LOGIN-REFERRALS UIDPLUS LIST-EXTENDED I18NLEVEL=1 STARTTLS AUTH=PLAIN] Dovecot ready. a login user userpassword a OK Logged in. a list "" * * LIST (\HasNoChildren) "." "Drafts" * LIST (\HasNoChildren) "." "Trash" * LIST (\HasNoChildren) "." "Sent items" * LIST (\HasNoChildren) "." "INBOX" a OK List completed. I think its because of ACL for user and it is using masterusers ACL. I looked at http://wiki2.dovecot.org/PostLoginScripting, however do we have sample login script so that I can use that script with modifications. Sorry I am new to dovecot. Thanks and Regards.

1 0

[Dovecot] lmtp log message
by Daniel L. Miller 29 Jul '12

29 Jul '12

I just tried switching to lmtp from lda. Messages are being delivered, but I now see messages similar to: Jul 26 22:59:21 bubba dovecot: lmtp(20508): Disconnect from local: Client quit (in reset) in my log for every message. Is this a normal sign-off - or does this indicate a misconfiguration? -- Daniel

4 6

[Dovecot] Problem with preserving MIME format with Dovecot IMAP and Outlook
by Peter Grimmond 29 Jul '12

29 Jul '12

Hello, I have installed Dovecot 2.0.19 on Ubuntu 12.04 LTS. I have set up a very basic IMAP configuration. I have two different laptops running Outlook (one MacOS, one Windows 7) and I have configured both to connect to the Dovecot service. My problem is, emails in MIME format that I synchronise from one Outlook client are not being correctly decoded as MIME messages on the other client. Instead, the message is rendered in plaintext, starting with the lines: This message is in MIME format. Since your mail reader does not understandthis format, some or all of this message may not be legible. --B_3426360453_22814Content-type: multipart/alternative; boundary="B_3426360453_4099" --B_3426360453_4099Content-type: text/plain; charset="ISO-8859-1"Content-transfer-encoding: quoted-printable Can anyone help me understand why this might be happening? The output from dovecot -n is: # 2.0.19: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-26-generic-pae i686 Ubuntu 12.04 LTS auth_debug = yes auth_verbose = yes disable_plaintext_auth = no mail_location = maildir:~/Maildir passdb { driver = pam } protocols = " imap" ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = passwd } Thanks! PG ___ Peter Grimmond E:peter@grimmond.org M:+44 7770 963352

1 0

Re: [Dovecot] expire-tool stops on first box with nothing to expire in it
by Joseph Tam 28 Jul '12

28 Jul '12

Michael Wessel writes: > When I run for example: > > doveadm -D search -A mailbox Trash savedbefore 60d > /tmp/discard I previously observed that the "date.saved" field (tested by savedbefore) seems to be clustered around particular timestamps. Dumping out this field using doveadm -ftab fetch -A \ "mailbox date.saved" \ $ mailbox Trash OR mailbox Junk OR mailbox "Deleted Items" $ it seems the timestamps do not actually correspond to when the client moves messages to their trash folder, but rather, to the time I query for it i.e. a query instantiates this value. This timestamp is then retained. In practice, if this query is done on a periodic interval (e.g. daily), the date.saved will be roughly correct, and is usable as an age test for expungement. Is there a way to force this value to be cached when the client actually saves or moves a message? Joseph Tam <jtam.home(a)gmail.com>

2 1

[Dovecot] [PATCH] Pop3/imap ordering in courier-dovecot-migrate.pl
by Pavel Stano 28 Jul '12

28 Jul '12

Hi, current version of courier migration script courier-dovecot-migrate.pl preserve order of POP3 UIDLs, but it keep IMAP UIDs not in order which cause problems with clients using IMAP along with POP3 in some cases. Attached patch use MAIL_FETCH_POP3_ORDER feature added in version 2.0.13 to keep POP3 and IMAP UID[L]s in order. -- [ Ohodnotte kvalitu mailu: http://nicereply.com/websupport/4afafd34/ ] Pavel Stano | admin team http://WebSupport.sk *** TAKE AND ENJOY ***

2 1

Re: [Dovecot] Disable W=<vsize> in filenames
by Daniel Pieper 28 Jul '12

28 Jul '12

I implemented a plugin for dovecot and now i got a error that maildir filename has wrong W value. When i rename the filename manually and delete the W value, all is ok.

2 1