- dovecot - dovecot.org

ldap and proxy/proxy_maybe
by jjhoffart 04 Nov '15

04 Nov '15

Hello, I am trying to setup dovecot director and am receiving a lot of "Aborted login (proxy dest auth failed)" and "error proxying loops to itself" messages in the dovecot log. I don't fully understand the dovecot-ldap.conf file config? could someone please let me know if the following is correct. If so what could be causing the errors mentioned above, if not what needs to be corrected? hosts = 127.0.0.1:389 ldap_version = 3 auth_bind = yes dn = cn=vmail,dc=something,dc=somewhere dnpass = hi89Dfnptc55jRWG9oLQJUfWOH0CgV base = o=domains,dc=campus,dc=local scope = subtree deref = never # Below two are required by command 'doveadm mailbox ...' iterate_attrs = mail=user iterate_filter = (&(objectClass=mailUser)(accountStatus=active)(enabledService=mail)) user_filter = (&(objectClass=mailUser)(accountStatus=active)(enabledService=mail)(enabledService=%Ls%Lc)(|(mail=%u)(&(enabledService=shadowaddress)(shadowAddress=%u)))) user_attrs = mail=user,homeDirectory=home,=mail=maildir:~/Maildir/,mailQuota=quota_rule=*:bytes=%$ # Used for dn lookup pass_filter = (&(objectClass=mailUser)(accountStatus=active)(enabledService=mail)(enabledService=%Ls%Lc)(|(mail=%u)(&(enabledService=shadowaddress)(shadowAddress=%u)))) pass_attrs = mail=user,userPassword=password,someAttribute=proxy,hostName=host default_pass_scheme = CRYPT

1 0

ssl-params: slow startup (patch for consideration)
by Joseph Tam 04 Nov '15

04 Nov '15

Based on the recent found weaknesses in DH key exchange, http://weakdh.org/ I increased ssl_dh_parameters_length to 2048 bits, and found waited for 5+ minutes for dovecot to come back online after a restart. Unless you got a fast machine, the initialization of DH parameters can exceed your patience. Regeneration may not be a problem (if ssl_parameters_regenerate=0 or if Dovecot uses old parameters until regeneration finishes), but for cold starts, the server can be tied up for a few minutes creating DH parameters while clients queue up. I ran "openssl dhparam 2048" and got wildly varying run times of 1m45s, 11m56s, 0.4s, 2m19s, 3h23s. Most of the time was spent testing primality of candidate p *and* (p-1)/2 -- so called "safe prime". If you're unlucky, this can take a long time. However, it appears "safe" primes are not what they're cracked up to be -- they offer some guarantees, but are not safer than non-safe primes. Creating DH parameters without requiring primality of (p-1)/2 (i.e. what "openssl dhparam -dsaparam" does) results in much lower run-time bounds. I cribbed some OpenSSL code to create this (untested) patch. -------------------------------------------------------------------------------- --- iostream-openssl-params.c~ Tue Nov 3 16:08:38 2015 +++ iostream-openssl-params.c Tue Nov 3 15:43:39 2015 @@ -6,5 +6,2 @@ -/* 2 or 5. Haven't seen their difference explained anywhere, but 2 is the - default.. */ -#define DH_GENERATOR 2 @@ -14,2 +11,3 @@ DH *dh; + DSA *dsa; unsigned char *p; @@ -17,3 +15,13 @@ - dh = DH_generate_parameters(bitsize, DH_GENERATOR, NULL, NULL); + dsa = DSA_generate_parameters(bitsize, NULL, 0, NULL, NULL, NULL, NULL); + if (dsa == NULL) { + *error_r = t_strdup_printf( + "DSA_generate_parameters(bits=%d) failed: %s", + bitsize, openssl_iostream_error()); + return -1; + } + + dh = DSA_dup_DH(dsa); + DSA_free(dsa); + if (dh == NULL) { @@ -20,4 +28,4 @@ *error_r = t_strdup_printf( - "DH_generate_parameters(bits=%d, gen=%d) failed: %s", - bitsize, DH_GENERATOR, openssl_iostream_error()); + "DSA_dup_DH() failed: %s", + openssl_iostream_error()); return -1; -------------------------------------------------------------------------------- The other way to prevent long startup times is to pre-compute the DH parameter using "openssl dhparam -out dh2048.pem 2048". I can contribute a patch to do this (read file, convert it into ssl-parameters.dat, then set/behave like ssl_parameters_regenerate=0), but I couldn't figure out the best place to do this. ssl_params_if_unchanged()? Joseph Tam <jtam.home(a)gmail.com>

2 1

dovecot-lda can't create /var/mail dotlocks on debian
by John Clements 03 Nov '15

03 Nov '15

I've been using dovecot+postfix happily for many years, and I'm now configuring it for a new machine. However, I'm running into an old problem again, and thinking that there must be a better solution. The problem is that dovecot-lda is unable to create dotlock files in the /var/mail directory. Dovecot version: 1:2.2.13-12~deb8u1 (I'm guessing this is upstream version 2.2.13) OS: Debian Jessie Currently, my mail directory has these permissions: clements@desmond:~$ ls -ld /var/mail drwxrwsr-x 2 root mail 4096 Nov 2 22:07 /var/mail clements@desmond:~$ ls -l /var/mail total 8 -rw------- 1 clements mail 1382 Nov 2 21:59 clements -rw------- 1 granitemon mail 530 Nov 2 22:07 granitemon I've added mail_privileged_group = mail to allow creation of the dotlock files. When I configure postfix to deliver using dovecot-lda, I get logs that look like this: Nov 3 11:12:20 desmond dovecot: lda(granitemon): Error: setegid(privileged) failed: Operation not permitted Nov 3 11:12:20 desmond dovecot: lda(granitemon): msgid=< 20151103181306.A4B5B5FF32(a)desmond.XXXDOMAIN.org>: save failed to INBOX: BUG: Unknown internal error In order to isolate the error, I took postfix out of the equation, and called dovecot-lda directly: clements@desmond:/tmp$ cat bogusmail From: clements(a)XXXDOMAIN.org To: granitemon@localhost Date: November 3 2015 Subject: graaaah this is the body clements@desmond:/tmp$ /usr/lib/dovecot/dovecot-lda -e -d clements < bogusmail BUG: Unknown internal error clements@desmond:/tmp$ In response to this, mail.log now contains this similar error: Nov 3 11:34:57 desmond dovecot: lda(clements): msgid=unspecified: save failed to INBOX: BUG: Unknown internal error Nov 3 11:34:57 desmond dovecot: lda(clements): Error: setegid(privileged) failed: Operation not permitted I've tried a number of "random internet search" solutions, including - changing perms on mail files from 660 to 600 - enabling 'mail_access_groups=mail' in 10-mail.conf - adding individual users to the mail group. I guess I'm pretty confident that if dovecot is writing "BUG: Unknown internal error" in the logs, that this is is actually a bug in dovecot. OBresearch: I read through the release notes of 2.2.14 -- 2.2.19 to see if a relevant-looking bug had been fixed, but nothing jumped out at me. OBresearch: searching the dovecot mailing list, I found one *extremely* relevant thread called "Re: [Dovecot] started with dovecot sieve <http://dovecot.markmail.org/message/kgd34wberxuvmrsa?q=setegid>", but there didn't seem to be a solution contained in the thread. Final note: this doesn't appear to be confined to debian jessie: I took a look at my existing installation, and I see that in fact I just went ahead and made /var/mail world-writeable, which seems... sub-optimal. I'm sure I could do that here, too, but I'd certainly rather not. Thanks in advance, and let me know if I've left out relevant crucial information. Best, John Clements

2 7

[dovceot-2.2.19] doveadm fts expand constantly gives Segfault
by Marcin Mirosław 03 Nov '15

03 Nov '15

Hi! When I issue: doveadm fts expand -A body xxx I'm always getting Segfault. I can't find descrption of this command in manual, is it possible to add some information to manual? # gdb -q doveadm Reading symbols from doveadm...Reading symbols from /usr/lib64/debug//usr/bin/doveadm.debug...done. done. (gdb) set args fts expand -A body XXX (gdb) run Starting program: /usr/bin/doveadm fts expand -A body XXX Warning: couldn't activate thread debugging using libthread_db: Cannot find new threads: generic error warning: File "/lib64/libthread_db-1.0.so" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load". To enable execution of this file add add-auto-load-safe-path /lib64/libthread_db-1.0.so line to your configuration file "/root/.gdbinit". To completely disable this security protection add set auto-load safe-path / line to your configuration file "/root/.gdbinit". For more information about this security protection see the "Auto-loading safe path" section in the GDB manual. E.g., run from the shell: info "(gdb)Auto-loading safe path" warning: Unable to find libthread_db matching inferior's thread library, thread debugging will not be available. Program received signal SIGSEGV, Segmentation fault. 0x00007ffff65a61af in fts_user_get_search_tokenizer (user=<optimized out>) at fts-user.c:248 248 fts-user.c: No such file or directory. (gdb) bt #0 0x00007ffff65a61af in fts_user_get_search_tokenizer (user=<optimized out>) at fts-user.c:248 #1 0x00007ffff65a2f8a in fts_search_arg_expand (backend=0x555555802f10, argp=0x7fffffffdf10, pool=0x5555557e56e0) at fts-search-args.c:108 #2 fts_search_args_expand_tree (backend=backend@entry=0x555555802f10, pool=0x5555557e56e0, argp=argp@entry=0x7fffffffdf10) at fts-search-args.c:171 #3 0x00007ffff65a31a5 in fts_search_args_expand (backend=backend@entry=0x555555802f10, args=0x5555557e5700) at fts-search-args.c:199 #4 0x00007ffff2118b2e in cmd_fts_expand_run (ctx=0x5555557e2f10, user=<optimized out>) at doveadm-fts.c:127 #5 0x000055555557a945 in doveadm_mail_next_user (ctx=0x5555557e2f10, input=<optimized out>, error_r=0x7fffffffe028) at doveadm-mail.c:384 #6 0x000055555557bf53 in doveadm_mail_all_users (wildcard_user=0x0, argv=<optimized out>, ctx=0x5555557e2f10) at doveadm-mail.c:452 #7 doveadm_mail_cmd (argv=<optimized out>, argc=<optimized out>, cmd=<optimized out>) at doveadm-mail.c:621 #8 doveadm_mail_try_run (cmd_name=<optimized out>, argc=4, argv=0x5555557ce3a0) at doveadm-mail.c:710 #9 0x000055555556ba6a in main (argc=5, argv=0x5555557ce398) at doveadm.c:345 (gdb) mail_plugins = acl fts fts_lucene listescape quota notify mail_log stats zlib protocol lmtp { mail_plugins = acl fts fts_lucene listescape quota notify mail_log stats zlib sieve } protocol lda { mail_plugins = quota sieve } protocol imap { mail_max_userip_connections = 25 mail_plugins = acl fts fts_lucene listescape quota notify mail_log stats zlib antispam imap_acl imap_quota imap_stats imap_zlib last_login } protocol pop3 { mail_plugins = acl fts fts_lucene listescape quota notify mail_log stats zlib last_login } Thanks, Marcin

1 0

[dovceot-2.2.19] doveadm fetch with fts_squat returns random results
by Marcin Mirosław 03 Nov '15

03 Nov '15

Hi all! I've got problem with results returned by doveadm fetch. The are random and incorrect. I'll try show you: - trying to fetch emails with both: nonexistent header name and non existent value of header name: -- doveadm fetch -u user@domain uid HEADER X-Sasdasdsendasasdasdasdasaer XXtuxie |grep -c uid 0 - trying to fetch email with: non existent header name and existent value of header (value exists usually in header X-Sender) -- # doveadm fetch -u user@domain uid HEADER X-Sasdasdsendasasdasdasdasaer tuxie |grep -c uid 13743 second search: -- # doveadm fetch -u user@domain uid HEADER X-Sasdasdsendasasdasdasdasaer tuxie |grep -c uid 16639 another search with the same criteria: -- doveadm fetch -u user@domain uid HEADER X-Sasdasdsendasasdasdasdasaer tuxie |grep -c uid 20296 so the number of fetched emails is random and none of them contains such header: -- # doveadm fetch -u user@domain hdr HEADER X-Sasdasdsendasasdasdasdasaer tuxie |grep -c X-Sasdasdsendasasdasdasdasaer 0 - now I'm searching for email with existent header contained existent value: -- # doveadm fetch -u user@domain uid HEADER X-Sender tuxie |grep -c uid 50699 second search: -- # doveadm fetch -u user@domain uid HEADER X-Sender tuxie |grep -c uid 50375 It looks for me that searching is done only for value of header not for both header name with given value. Next I turn off fts_squat in config and now results are correct. If someone uses doevadm expunge with fts_squat should be carefull. I just tried fts_lucene - no problem. Regards, Marcin

1 0

Initialization Failed:
by brian 01 Nov '15

01 Nov '15

Hi dovecotters I am trying to install dovecot on a mail server I am provisioning for myself in AWS. I am following an ArsTechnica guide, and at some stage in the process the author recommends and provides instructions to configure Dovecot (http://arstechnica.com/information-technology/2014/03/taking-e-mail-back-pa…) So, now I have it installed and configured (I believe the way suggested) but when I try to connect via IMAP I am getting an error. If I try : root@ip-10-0-0-244:~# telnet mail.myactualdomain.com 143 Trying 127.0.0.1... Connected to mail.myactualdomain.com. Escape character is '^]'. * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE STARTTLS AUTH=PLAIN AUTH=LOGIN] Dovecot (Ubuntu) ready. a1 LOGIN brian(a)myactualdomain.com plaintextpassword * BYE Internal error occurred. Refer to server log for more information. Connection closed by foreign host. root@ip-10-0-0-244:~# If I go to /var/log/syslog I can see the following lines: Oct 31 05:31:06 ip-10-0-0-244 dovecot: imap-login: Login: user=<brian(a)myactualdomain.com>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=16934, secured, session=<oCTO2V8jUwB/AAAB> Oct 31 05:31:06 ip-10-0-0-244 dovecot: imap(brian(a)myactualdomain.com): Error: user brian(a)myactualdomain.com: Initialization failed: Namespace '': Unknown setting: /var/mail/vmail/myactualdomain.com/brian/mail Oct 31 05:31:06 ip-10-0-0-244 dovecot: imap(brian(a)myactualdomain.com): Error: Invalid user settings. Refer to server log for more information. root@ip-10-0-0-244:~# dovecot --version 2.2.9 So, I don't know why it's giving me an error about : Initialization failed: Namespace '': Unknown setting: /var/mail/vmail/myactualdomain.com/brian/mail The location is there, with the permissions with I believe the correct permissions. I'm a bit stuck as to where to even go from here. Any help would be greatly appreciated. Kind Regards Brian root@ip-10-0-0-244:~# dovecot -n # 2.2.9: /etc/dovecot/dovecot.conf # OS: Linux 3.13.0-48-generic x86_64 Ubuntu 14.04.2 LTS auth_mechanisms = plain login auth_verbose = yes mail_home = /var/mail/vmail/%d/%n mail_location = maildir:~/Maildir:/var/mail/vmail/%d/%n/mail:LAYOUT=fs managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace inbox { inbox = yes location = mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox Junk { auto = subscribe special_use = \Junk } mailbox Sent { auto = subscribe special_use = \Sent } mailbox Trash { auto = subscribe special_use = \Trash } prefix = } passdb { args = username_format=%u scheme=ssha512 /etc/dovecot/passwd.db driver = passwd-file } plugin { sieve = ~/.dovecot.sieve sieve_after = /var/mail/vmail/sieve-after sieve_before = /var/mail/vmail/sieve-before sieve_dir = ~/sieve } protocols = imap sieve service auth { unix_listener /var/spool/postfix/private/dovecot-auth { group = postfix mode = 0660 user = postfix } } ssl_cert = </etc/ssl/private/ssl-chain-mail-myactualdomain.pem ssl_cipher_list = ALL:!LOW:!SSLv2:ALL:!aNULL:!ADH:!eNULL:!EXP:RC4+RSA:+HIGH:+MEDIUM ssl_client_ca_dir = /etc/ssl/certs ssl_key = </etc/ssl/private/ssl-key-decrypted-mail-myactualdomain.key userdb { args = uid=5000 gid=5000 home=/var/mail/vmail/%d/%n driver = static } protocol lda { deliver_log_format = msgid=%m: %$ mail_plugins = sieve postmaster_address = postmaster(a)myactualdomain.com quota_full_tempfail = yes rejection_reason = Your message to <%t> was automatically rejected:%n%r } protocol imap { imap_client_workarounds = delay-newmail tb-extra-mailbox-sep mail_max_userip_connections = 10 }

2 2

Re: Dovecot, JavaMail, UIDs and Message Numbers
by Filippo Carletti 31 Oct '15

31 Oct '15

We're using dovecot-2.1.16 on CentOS (rpm package from epel repo). Maildir format on ext4. > What exactly do you mean by "Dovecot started reindexing"? Selecting thread sort on the javamail client, the imap process opens all files in the folder and updates the following files on disk: dovecot.index dovecot.index.cache dovecot.index.log dovecot.index.log.2 dovecot.index.thread The folder has around 5000 mails and the operation takes some minutes (hw is not the bottleneck). Selecting thread view on Thunderbird or Roundcube takes less than a second, I can't see the imap process doing anything. > Dovecot's normal indexes or full text search indexes? Normal indexes. > How have you configured everything? What do you need to know in particular? doveconf output? Maildir infos: # time cat cur/* >/dev/null real 0m4.651s user 0m0.045s sys 0m0.141s # ls -f cur/ | wc -l 4170 # du -sh cur 49M cur Things go worse with a bigger maildir. > Does Dovecot log anything (especially any errors/warnings about anything)? No errors or warnings at all. I've enabled the mail_log plugin, but I think it can't log indexing operations. Thank you. -- Ciao, Filippo

1 0

Re: Webmail accessive Dovecot logins
by Joseph Tam 30 Oct '15

30 Oct '15

"A. Schulze" writes: > David Mehler: > >> Second question, in the doveconf -n there's reference to my ssl_cipher >> am I using current tls ciphers that support pfs? > >> ssl_cipher_list = ALL:!LOW:!SSLv3:!SSLv2:!EXP:!aNULL > > some non pfs cipher would be still active. check yourself: > # openssl ciphers -v 'ALL:!LOW:!SSLv3:!SSLv2:!EXP:!aNULL' | grep -v DH You'll want the 'E' variation (ephemeral) of the DH algorithms, and preferably, the ECDHE variety as they are faster and supported on more browsers. The pattern to search for (or exclude) is "DHE" openssl ciphers -v {cipher-specs} | grep DHE If the OP wants preferentially use PFS ciphers (but keep the other ciphers around for very old browsers), maybe something like ssl_cipher_list = ECDH:ALL:!LOW:!SSLv2:!EXP:!aNULL ssl_prefer_server_ciphers = yes > finally you could use the service provided by ssllabs.com to scan your host. I second this recommendation, if you can work out the port issue. Maybe using a ncat | ncat pipe. Joseph Tam <jtam.home(a)gmail.com>

1 0

updating and wsitching repo to yum.dovecot.fi - Unknown protocol: sieve
by Götz Reinicke - IT Koordinator 30 Oct '15

30 Oct '15

Hi, winter is coming and so I start to clean up some left overs of the year. One thing is to use the yum.dovecot.fi repository. After installing the current availabel dovecot and dovecot-ee-pigeonhole package and restarting dovecot I do get the error: doveconf: Fatal: Error in configuration file /etc/dovecot/dovecot.conf: protocols: Unknown protocol: sieve Is the sieve protocol an extra package? I thought in the 2.2. tree I dont have to do bigger config changes. We run already 2.2.something from city-fan.org and the switch was also the idea of going to the most recent release. Thanks for hints and feedback . Götz -- Götz Reinicke IT-Koordinator Tel. +49 7141 969 82420 E-Mail goetz.reinicke(a)filmakademie.de Filmakademie Baden-Württemberg GmbH Akademiehof 10 71638 Ludwigsburg www.filmakademie.de Eintragung Amtsgericht Stuttgart HRB 205016 Vorsitzender des Aufsichtsrats: Jürgen Walter MdL Staatssekretär im Ministerium für Wissenschaft, Forschung und Kunst Baden-Württemberg Geschäftsführer: Prof. Thomas Schadt

3 5

Webmail accessive Dovecot logins
by David Mehler 30 Oct '15

30 Oct '15

Hello, I've seen this issue before, running a imap/smtp/database server on localhost and adding in a webmail interface, in this case Roundcube. In my maillog I'm seeing accessive Dovecot connections and logouts just from my own transaction of logging in, going to compose a message, sending, and logging out. I'm using Mysql as database backend and was wondering if there was something I could do to cut down on the amount of connections needed? I'm running 2.2.19 on a FreeBSD 10.2 system. I'm not sure what other information to provide, here's the relevant log and a doveconf -n. Second question, in the doveconf -n there's reference to my ssl_cipher am I using current tls ciphers that support pfs? Thanks. Dave. Oct 29 20:51:21 server dovecot: imap-login: Login: user=<xxx>, method=PLAIN, rip=::1, lip=::1, mpid=71405, secured, session=<6Px600cja6cAAAAAAAAAAAAAAAAAAAAB> Oct 29 20:51:21 server dovecot: imap(xxx): Disconnected: Logged out in=82 out=763 Oct 29 20:51:22 server dovecot: imap-login: Login: user=<xxx>, method=PLAIN, rip=::1, lip=::1, mpid=72189, secured, session=<c8eL00cjxXYAAAAAAAAAAAAAAAAAAAAB> Oct 29 20:51:22 server dovecot: imap(xxx): Disconnected: Logged out in=70 out=932 Oct 29 20:51:29 server dovecot: imap-login: Login: user=<xxx>, method=PLAIN, rip=::1, lip=::1, mpid=74281, secured, session=<AQz100cj378AAAAAAAAAAAAAAAAAAAAB> Oct 29 20:51:29 server dovecot: imap-login: Login: user=<xxx>, method=PLAIN, rip=::1, lip=::1, mpid=74927, secured, session=<fH3100cjQ5AAAAAAAAAAAAAAAAAAAAAB> Oct 29 20:51:29 server dovecot: imap(xxx): Disconnected: Logged out in=439 out=1702 Oct 29 20:51:29 server dovecot: imap(xxx): Disconnected: Logged out in=326 out=24327 Oct 29 20:51:45 server dovecot: imap-login: Login: user=<xxx>, method=PLAIN, rip=::1, lip=::1, mpid=75557, secured, session=<3tjm1EcjsjUAAAAAAAAAAAAAAAAAAAAB> Oct 29 20:51:45 server dovecot: imap(xxx): Disconnected: Logged out in=32 out=521 Oct 29 20:51:46 server dovecot: imap-login: Login: user=<xxx>, method=PLAIN, rip=::1, lip=::1, mpid=77051, secured, session=<N6311EcjlbQAAAAAAAAAAAAAAAAAAAAB> Oct 29 20:51:46 server dovecot: imap(xxx): Disconnected: Logged out in=44 out=799 doveconf -n # 2.2.19: /usr/local/etc/dovecot/dovecot.conf # Pigeonhole version 0.4.9 (357ac0a0e68b+) # OS: FreeBSD 10.2-RELEASE amd64 ufs auth_default_realm = domain.com auth_mechanisms = plain login dict { sqlquota = mysql:/usr/local/etc/dovecot/dovecot-dict-sql.conf.ext } first_valid_gid = 999 first_valid_uid = 999 hostname = xxx(a)domain.com imap_client_workarounds = delay-newmail tb-extra-mailbox-sep tb-lsub-flags last_valid_gid = 999 last_valid_uid = 999 lmtp_rcpt_check_quota = yes mail_gid = vmail mail_home = /home/vmail/%d/%n/home mail_location = maildir:/home/vmail/%d/%n:LAYOUT=fs mail_plugins = acl quota zlib mail_server_admin = mailto:postmaster@domain.com mail_uid = vmail mailbox_list_index = yes maildir_broken_filename_sizes = yes maildir_empty_new = yes maildir_stat_dirs = yes maildir_very_dirty_syncs = yes managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate namespace { list = yes location = maildir:/home/vmail/public:LAYOUT=fs prefix = public/ separator = / subscriptions = yes type = public } namespace inbox { hidden = no inbox = yes list = yes location = mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox Sent { auto = subscribe special_use = \Sent } mailbox Spam { auto = subscribe special_use = \Junk } mailbox Trash { auto = subscribe special_use = \Trash } prefix = separator = / subscriptions = yes type = private } passdb { args = /usr/local/etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { quota = dict:User quota::proxy::sqlquota quota_grace = 10%% quota_status_nouser = DUNNO quota_status_overquota = 552 5.2.2 Mailbox is full quota_status_success = DUNNO sieve_default = /home/vmail/conf.d/domain.com/sieve/default.sieve } postmaster_address = postmaster(a)domain.com protocols = imap service auth { unix_listener /var/spool/postfix/private/auth { mode = 0666 } unix_listener auth-userdb { mode = 0600 user = vmail } } service dict { unix_listener dict { mode = 0600 user = vmail } } service imap-login { inet_listener imap { address = } inet_listener imaps { ssl = yes } } service lmtp { unix_listener dovecot-lmtp { group = postfix mode = 0660 user = postfix } } service quota-status { client_limit = 1 executable = quota-status -p postfix inet_listener { address = 127.0.0.1 port = 12345 } } ssl = required ssl_cert = </etc/ssl/certs/server.crt ssl_cipher_list = ALL:!LOW:!SSLv3:!SSLv2:!EXP:!aNULL ssl_dh_parameters_length = 4096 ssl_key = </etc/ssl/private/server.key ssl_protocols = TLSv1 !SSLv3 !SSLv2 userdb { args = /usr/local/etc/dovecot/dovecot-sql.conf.ext driver = sql } protocol lmtp { mail_plugins = acl quota zlib sieve } protocol lda { mail_plugins = acl quota zlib quota sieve } protocol imap { mail_plugins = acl quota zlib imap_acl imap_quota imap_zlib }

3 2