- dovecot - dovecot.org

[Dovecot] Load Balancing and HA
by Romer Ventura 06 Jun '13

06 Jun '13

Hello, I've been thinking about the best way to achieve load balancing and making my mail servers highly available. So far I believe I have 2 scenarios: Scenario1: This should allow any to lose any of the servers and clients still have access to their emails (although I am not sure how the indexes would react to this and sudden disconnection) - 2 Dovecot Proxy servers, using a virtual IP to where the clients will connect to from the WAN and LAN - 2 Dovecot+Postfix servers with local cache - 2 NFS servers and synced with dsync (mirror, 1 server writes to its own NFS and changes synced to the other via dsync) Scenario2: Pretty much as above on the back end. However, with this there is no way to load balance users. - 2 Dovecot+Postfix server with local cache - 2 NFS servers synced with dsync - Make use of DNS MX record priority to provide access to secondary email server Anyone care to comment? Thanks. <BR CLEAR="ALL"> <hr style="border: 1px solid #CCC;"> <p style="font-style:italic; font-size:8pt; font-family:verdana; color:gray;">This document and attachments may contain technical data controlled under the U.S. International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR) and may not be exported to a Foreign Person, either in the U.S. or abroad, without the proper authorization by the U.S. Department of State or Department of Commerce, whichever is applicable. CONFIDENTIALITY NOTE: This electronic transmission, including all attachments, is directed in confidence solely to the person(s) to whom it is addressed, or an authorized recipient, and may not otherwise be distributed, copied or disclosed. The contents of the transmission may also be subject to intellectual property rights and such rights are expressly claimed and are not waived. If you have received this transmission in error, please notify the sender immediately by return electronic transmission and then immediately delete this transmission, including all attachments, without copying, distributing or disclosing same. The recipient should check this e-mail and any attachments for the presence of viruses. Houston Sigma Technologies L.P. accepts no liability for any damage caused by any virus transmitted by this e-mail.</p>

6 8

[Dovecot] Dovecot mysql replication
by Edwardo Garcia 06 Jun '13

06 Jun '13

Halo, (First time posting, please forgive English is not native) Change from Courier to Dovecot 2.1.16 Having two server. Having mysql on thiz two server, one master, one slave. What we wish is slave Dovecot only ask slave mysql, unless slave mysql not work when then ask master, we have Postfix do thiz fallover good, but Dovecot talk to slave and master no mater what, we think thiz defeat fallover as we not want this aktion, but aktion like Postfix. The problemo is can not find Dovecot option for thiz in wiki2.dovecot.org, is possible?

9 26

[Dovecot] Error: Threading lost Message ID
by Oscar A. Jara 05 Jun '13

05 Jun '13

Hello everyone, I have just put in production dovecot imap and pop3 in replacement of courier in a setup of 700 accounts aprox. Dovecot release running is 1.2.16 in a Linux CentOS 5.8. Seems like some accounts are having problems dealing with message threading, as I read lines like this one in my logs: IMAP(some_user): Error: Threading lost Message ID ...and some of those accounts cannot even list the emails. I temporarily got rid of this problem deactivating threading on those accounts but I would like to solve it. I found a patch that seams to deal with this problem at http://hg.dovecot.org/dovecot-1.2/rev/76023d59c3b2 but it would be weird that CentOS wouldn't have release a patched version of the package. Am I missing something here? Thanks in advance! __________ Information from ESET Mail Security, version of virus signature database 8412 (20130604) __________ The message was checked by ESET Mail Security. http://www.eset.com

2 3

[Dovecot] Crash dovecot 1.2.15
by ib 05 Jun '13

05 Jun '13

Hi everybody We have a probleme with dovecot Jun 05 06:26:01 dovecot: Warning: SIGHUP received - reloading configuration Jun 05 06:26:02 dovecot: Error: Raw backtrace: /usr/sbin/dovecot() [0x41348a] -> /usr/sbin/dovecot() [0x413584] -> /usr/sbin/dovecot() [0x40b290] -> /usr/sbin/dovecot() [0x412bf6] -> /usr/sbin/dovecot() [0x405c9a] -> /usr/sbin/dovecot() [0x416f3d] -> /usr/sbin/dovecot() [0x4163b8] -> /usr/sbin/dovecot() [0x40bb39] -> /lib/libc.so.6(__libc_start_main+0xfd) [0x7f2bad861c8d] -> /usr/sbin/dovecot() [0x403859] Jun 05 07:58:09 dovecot: Info: Dovecot v1.2.15 starting up (core dumps disabled) -- Cordialement, <http://www.ice-dev.com> *Ivan BERTHELOT* Administrateur Réseaux ICE DEVELOPMENT 16 rue Maurice Bouchor Tel : 08 21 23 03 54 http://www.ice-dev.com

2 1

Re: [Dovecot] dovecot and time
by Rick Romero 05 Jun '13

05 Jun '13

I found something interesting via strace. lda is writing a timestamp with utime before doign the fsync, but I'm really not a C guy, so I have no idea why that's going on via procmail and not via commandline. I assume it's related to the choice of pread64 vs read. when called from commandline (working): read(0, "July 14-20, 2013\n10 courses. Bon"..., 4096) = 4096 read(0, "s bigger\nthan most realistic cyb"..., 4096) = 4096 read(0, "olina company in\nnumerous small,"..., 4096) = 4096 read(0, "on't have any way to tell you\". "..., 4096) = 4096 read(0, "rer. This version of Chrome addr"..., 4096) = 4096 read(0, "edu.\n\nDr. Johannes Ullrich is Ch"..., 4096) = 3164 read(0, "", 932) = 0 umask(0177) = 077 open("/usr/home/vpopmail/domains/havokmon.com/rick/Maildir/tmp/1370448645.M589211P14191.smtp101", O_WRONLY|O_CREAT|O_EXCL|O_TRUNC|O_LARGEFILE, 0777) = 11 umask(077) = 0177 open("/usr/home/vpopmail/domains/havokmon.com/rick/Maildir/dovecot.index.cache", O_RDWR|O_LARGEFILE) = 12 fstat64(12, {st_mode=S_IFREG|0600, st_size=1568768, ...}) = 0 mmap2(NULL, 1568768, PROT_READ, MAP_SHARED, 12, 0) = 0xb7064000 fstat64(11, {st_mode=S_IFREG|0600, st_size=0, ...}) = 0 write(11, "Return-Path: <newsbites(a)sans.org"..., 8192) = 8192 write(11, "s bigger\nthan most realistic cyb"..., 8192) = 8192 write(11, "on't have any way to tell you\". "..., 11356) = 11356 fstat64(11, {st_mode=S_IFREG|0600, st_size=27740, ...}) = 0 fsync(11) = 0 _llseek(11, 0, [27740], SEEK_END) = 0 close(11) = 0 time(NULL) = 1370448645 umask(0177) = 077 when called from procmail (not working): pread64(10, "00.vfemail.net,S=10941\n968 W2552"..., 4064, 52993) = 4064 pread64(10, "53 :1361943010.39085.mx100.vfema"..., 4087, 57057) = 4087 pread64(10, " :1364597743.43999.mx100.vfemail"..., 4085, 61144) = 4085 pread64(10, "mx100.vfemail.net,S=15951\n17287 "..., 4065, 65229) = 4065 pread64(10, "637P32360.smtp101.vfemail.net,S="..., 4074, 69294) = 3967 pread64(10, "", 107, 73261) = 0 umask(0177) = 077 open("/usr/home/vpopmail/domains/havokmon.com/rick/Maildir/tmp/1370449940.M313792P17436.smtp101", O_WRONLY|O_CREAT|O_EXCL|O_TRUNC|O_LARGEFILE, 0777) = 11 umask(077) = 0177 open("/usr/home/vpopmail/domains/havokmon.com/rick/Maildir/dovecot.index.cache", O_RDWR|O_LARGEFILE) = 12 fstat64(12, {st_mode=S_IFREG|0600, st_size=1575936, ...}) = 0 mmap2(NULL, 1575936, PROT_READ, MAP_SHARED, 12, 0) = 0xb70b0000 fstat64(11, {st_mode=S_IFREG|0600, st_size=0, ...}) = 0 read(0, "", 1127) = 0 write(11, "Return-Path: <dovecot-bounces@do"..., 2911) = 2911 utime("/usr/home/vpopmail/domains/havokmon.com/rick/Maildir/tmp/1370449940.M313792P17436.smtp101", [2013/06/05-16:32:20, 2013/06/05-21:32:18]) = fsync(11) = 0 _llseek(11, 0, [2911], SEEK_END) = 0 close(11) = 0 time(NULL) = 1370449940 umask(0177) = 077 Should I attach full traces? They're 32k and 64k respectively. Sorry about the lack of threading, I had my subscription off and didn't get a copy to reply to :/ Rick

2 2

[Dovecot] 400 Bad Request response from pigeonhole.dovecot.org
by ben＠indietorrent.org 05 Jun '13

05 Jun '13

I'm attempting to access the Pigeonhole documentation but am receiving a 400 Bad Request response from http://pigeonhole.dovecot.org/ . Is this expected? If so, has the documentation moved? Thanks for any help! -Ben

2 2

[Dovecot] partionning users among backends
by Emmanuel Dreyfus 05 Jun '13

05 Jun '13

Hi I face growing load on a mailserver, and I would like to spread the load on multiple machines. I made a first attempt with dsync but got burnt with issues with mbox, therefore now I am looking for another safer approach. Partitionning users on multiple backends would address my load problem. I would have 50% of users on mail1.example.net and 50% on mail2.example.net, but I need to correctly redirect users requests, as their mail user agents only know about mail.example.net. Is dovecot able to send request to the local machine or to proxy them to another one, depending on information it would have on user mailboxes location? If it does, do we have documentation on this? -- Emmanuel Dreyfus manu(a)netbsd.org

2 1

[Dovecot] Bad exit status from dsync
by Jan-Frode Myklebust 05 Jun '13

05 Jun '13

I just tried to migrate one of my users from maildir to mdbox using dsync. My conversion script is checking the dsync exit code to know if the conversion goes fine or not, and surprisingly dsync returned "0" at the same time as it gave the error: Error: Failed to sync mailbox .ta\ vare\ på ... (sorry, lost the rest of the error message) Changing the folder name to mUTF7 manually made it work, but I didn't like that dsync returned success when it got this error. That breaks the failsafe logic in my conversion script. Dovecot version dovecot-ee-2.1.16.3-1, x86_64, RHEL5. Dsync command used: dsync -v -u username(a)example.net mirror maildir:/usr/local/atmail/users/u/s/username@example.net With these dovecot.conf settings: mail_home = /srv/mailstore/%256LRHu/%Ld/%Ln mail_location = mdbox:~/mdbox -jf

2 1

[Dovecot] Dovecot and time (again)
by Rick Romero 05 Jun '13

05 Jun '13

I'm rehashing/reliving my issues from 2010: http://www.dovecot.org/list/dovecot/2010-October/053528.html In short, when calling deliver from vdelivermail (or procmail), and delivering via NFS to Maildir, the timestamp on the file is GMT. If procmail or vdelivermail completely handle the email, the timestamp is CST. The server is set to CST. What's changed from the original issue? Previously was running dovecot 1.x on FreeBSD, now 2.1.7 on Debian 7. I know it's a few versions behind, but this is a deliver only server, and ChangeLog doesn't show too many fixes for lda. Of course, running the command from the command line works perfectly... So where could my problem reside? Two examples: 1st via Calling from procmail: :0 * ? test -f /usr/lib/dovecot/dovecot-lda { :0w |/usr/lib/dovecot/deliver -d $EXT@$HOST } -rw------- 1 vpopmail vchkpw 87196 Jun 5 13:43 1370439849.M812P29560.smtp101,S=87196,W=88094 2nd via Commandline: #sudo -u vpopmail cat /tmp/testmail.txt | /usr/lib/dovecot/deliver -d rick(a)havokmon.com -rw------- 1 vpopmail vchkpw 27740 Jun 5 08:46 1370440001.M421646P29846.smtp101,S=27740,W=28243 I've thrown the TZ variable in the mix as well with no resolution |/usr/bin/env -i TZ=CST /usr/lib/dovecot/deliver -d $EXT@$HOST |/usr/bin/env -i TZ=America/Chicago /usr/lib/dovecot/deliver -d $EXT@$HOST I've also set import_environment = TZ , but it doesn't seem to show in dovecot -n ... Any other thoughts? Side note - deliver behavior has changed since 1.x. I used to be able to specifiy the HOME directory, but now deliver requires the -d parameter, so I've had to setup an Auth server where I didn't have to in the past. Am I the only one who doesn't run my servers in GMT? I seem to only find my own posts when searching on this :) Rick

2 1

[Dovecot] valid folder name
by Jan-Frode Myklebust 05 Jun '13

05 Jun '13

We have a quite large user base, with lots of bad folder names because the mail folders was earlier accessible outside of dovecot. Now we're running dsync conversions from maildir to mdbox for all users, but are struggelig a bit with dsync not liking invalid folder names. Before we convert a user we try to determine if the folder names are valid, but we don't have a very good regexp for validating it. Maybe someone else knows a way to verify (and fix?) folder names that are invalid. The rules I know is: - name doesn't start with '.' or '~' (after the initial '.') - name doesn't end with '.' - the name doesn't contain '..' - the name is valid mUTF7 So, any regexp gurus that can distill those rules down to something usable? -jf -- Some people, when confronted with a problem, think "I know, I'll use regular expressions." Now they have two problems. -jwz

1 0

[Dovecot] Make install error
by kengheng 05 Jun '13

05 Jun '13

Hi, I'm recompiling dovecot 2.2.0/2.2.1 with error below during make install: test -z "/usr/local/dovecot/lib/dovecot/auth" || /usr/bin/mkdir -p "/usr/local/dovecot/lib/dovecot/auth" /usr/bin/mkdir: cannot create directory ‘/usr/local/dovecot/lib/dovecot/auth’: File exists make[3]: *** [install-auth_moduleLTLIBRARIES] Error 1 make[3]: Leaving directory `/usr/local/src/dovecot-2.2.1/src/auth' make[2]: *** [install-am] Error 2 make[2]: Leaving directory `/usr/local/src/dovecot-2.2.1/src/auth' make[1]: *** [install-recursive] Error 1 make[1]: Leaving directory `/usr/local/src/dovecot-2.2.1/src' make: *** [install-recursive] Error 1 The target Svr OS: OpenSuse 12.2 x86 and installed success for qmail/vpopmail. The configuration for dovecot as below: ./configure \ --prefix=/usr/local/dovecot \ --with-vpopmail \ --with-docs \ --with-ssl \ --without-shadow \ --without-pam \ --without-ldap \ --without-pgsql \ --without-sql \ --without-mysql \ --without-sqlite Thanks, KH. Chan

4 11

[Dovecot] Director in v2.2.2
by Joe Wong 05 Jun '13

05 Jun '13

Hi, I am going to try and study Dovecot with Director in v2.2.2, would like to confirm the Director bundled there is the latest version, as I saw #define DIRECTOR_VERSION_NAME "director" #define DIRECTOR_VERSION_MAJOR 1 #define DIRECTOR_VERSION_MINOR 3 in director.h thanks, - Joe

1 0

[Dovecot] Support not compiled in for passdb driver 'pam' + telnet localhost imap.
by Maria Jose Yañez Dacosta 05 Jun '13

05 Jun '13

Hi!, I Install dovecot version 2.1.16 on CentOS 6.4 x86_64. When I try to test the installation (by telnet localhost imap) the following error occurs: "auth: Fatal: Support not compiled in for passdb driver 'pam'". I do not discover what caused this. Here I leave the configuration data and the log. Thanks ------------------------------------ / var / log / maillog --------------------------------------- May 31 15:45:55 prueba-mail dovecot: master: Dovecot v2.1.16 starting up (core dumps disabled) May 31 15:46:04 prueba-mail dovecot: auth: Fatal: Support not compiled in for passdb driver 'pam' May 31 15:46:04 prueba-mail dovecot: master: Error: service(auth): command startup failed, throttling for 2 secs May 31 15:46:04 prueba-mail dovecot: imap-login: Disconnected: Auth process broken (disconnected before greeting, waited 0 secs): user=<>, rip=::1, lip=::1, secured, session=<jabyBgjevAAAAAAAAAAAAAAAAAAAAAAB> ------------------------------------ doveconf-n -------------------------------------------------- # 2.1.16: /usr/local/etc/dovecot/dovecot.conf # OS: Linux 2.6.32-358.6.2.el6.x86_64 x86_64 CentOS release 6.4 (Final) auth_use_winbind = yes namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } passdb { driver = pam } protocols = imap pop3 ssl = no userdb { args = uid=10000 gid=10000 home=/mail/%d/%n allow_all_users=yes driver = static } -- Maria José

1 0

[Dovecot] Fw: Cannot Authenticate via LDAP
by Christian Wiese 04 Jun '13

04 Jun '13

Hello Christian, I tried what you suggested by adding "REFERALS off" to /etc/ldap/ldap.conf and restarting slapd and dovecot, but the error persists. On Tue, Jun 4, 2013 at 7:56 AM, Christian Wiese < christian.wiese(a)securepoint.de> wrote: > Hi Ron, > > I didn't had the time to check all logs but the error log. > First thing you should check if there are LDAP REFFERALS enabled in > the systems ldap.conf. > I had a similar looking issue and it took me a good amount of time to > figure out that I had to disable LDAP REFFERALS globally. > This happened when using an AD as LDAP backend, but also applies to > Samba4 as you can see in the following mailing list thread: > > > http://dovecot.markmail.org/message/mjurv4fp4w65u2ib?q=Dovecot+LDA+LDAP+loo… > > The settings within the systems ldap.conf might influence dovecot, > because libldap (openldap) functions might read the global ldap.conf > settings. > > Hope that helps. > > Cheers, > Chris > > Am Tue, 4 Jun 2013 05:50:16 -0400 > schrieb Ron Scott-Adams <ron(a)tohuw.net>: > > > a login tohuw [myPassword] returns "NO [AUTHENTICATIONFAILED] > > Authentication failed." I believe I'm missing a configuration > > detail, but what? > > > > > > info.log: http://pastebin.ca/2388873 > > > > debug.log: http://pastebin.ca/2388872 > > > > error.log: http://pastebin.ca/2388871 > > > > dovecot -n: http://pastebin.ca/2388870 > > > > dovecot-ldap.conf.ext summary: http://pastebin.ca/2388867 > >

3 5

[Dovecot] Administrative mailbox deletions
by Alan Brown 04 Jun '13

04 Jun '13

I'm in the process of nuking a bunch of dead mailboxes after they've been migrated to other servers - but the accounts have been kept. A simple shell script takes care of most of it, BUT.... (there's always a "but" isn't there?) One user has named all his mailboxes with leading hyphens. ie: -foo -bar -bazz and "doveadm mailbox delete" doesn't like it. Does anyone have the magic sauce needed to escape the - character? Thanks in advance Alan

3 2

[Dovecot] Cannot Authenticate via LDAP
by Ron Scott-Adams 04 Jun '13

04 Jun '13

a login tohuw [myPassword] returns "NO [AUTHENTICATIONFAILED] Authentication failed." I believe I'm missing a configuration detail, but what? info.log: http://pastebin.ca/2388873 debug.log: http://pastebin.ca/2388872 error.log: http://pastebin.ca/2388871 dovecot -n: http://pastebin.ca/2388870 dovecot-ldap.conf.ext summary: http://pastebin.ca/2388867

2 1

Re: [Dovecot] Administrative mailbox deletions
by Alan Brown 04 Jun '13

04 Jun '13

>> and "doveadm mailbox delete" doesn't like it. >> >> Does anyone have the magic sauce needed to escape the - character? > > An "escaping" that works at the *nix level (not necessarily with > doveadm, but I would assume it works there too) is, e.g., > > rm -- -foo > > i.e., double dashes to nullify the "-" option flag, followed by the > filename. That does work. Thanks. Alan

1 0

[Dovecot] Imap Server as storage backend for dovecot
by Micha Krause 04 Jun '13

04 Jun '13

Hi, I remember reading about the possibility to configure a namespace to point to another imap server (not dovecot) and use it as a backend for storing mails. However, I could not find any documentation about this, so Im not sure if I remember correctly. Micha Krause

1 0

[Dovecot] recursive mail_location?
by Eric Abrahamsen 04 Jun '13

04 Jun '13

Forgive what may be a newby question, but I'm trying to get a new setup working, and there are many different things confusing me. I'm trying for a gnus + dovecot + mbsync arrangement, with mbsync writing to maildirs, and gnus reading from those dirs with a dovecot invocation. Fairly standard, I think. I have multiple email accounts I'm trying to sync, all of them gmail. My problem is that mbsync creates one maildir structure for each mailbox in each account. So I end up with: ~/mail ├── acc1 │ ├── INBOX │ │ ├── cur │ │ ├── new │ │ └── tmp │ └── OTHERBOX │ ├── cur │ ├── new │ └── tmp └── acc2 ├── INBOX │ ├── cur │ ├── new │ └── tmp └── OTHERBOX ├── cur ├── new └── tmp And so on, for many accounts, and many mailboxes. I believe there's something I can configure in mbsync to collapse this a little, but there's still going to be quite a bit of nesting. Gnus, meanwhile, is meant to invoke dovecot with the "-o mail_location" switch, and as far as I can tell that needs to be pointed at a maildir structure, which means I would need a separate gnus server for each mailbox in each account. Does anyone have a recommended way of handling this? Is it possible to either "flatten" the structure further, or somehow tell dovecot to recurse into directories? I don't mind having a separate gnus server for each mail account, but I'd hate to have to do one per mailbox. I'm only just getting started and haven't invested myself in any particular setup, so if the answer is "you're doing it all wrong", I would love to hear that. Thanks! Eric

3 5

[Dovecot] Configuration advice needed.
by Olivier Girard 03 Jun '13

03 Jun '13

Hello, First, thanks for this great piece of software. I'm new to dovecot and i've just converted my old courier configuration on pop/imap server side, everithing is working just fine on this side and speed gain expected was found (not enough for our busy servers :). Setup is done with 3 dovecot virtual servers load balanced with a Hardware load balancer (this part is a big point of the question). Postfix and dovecot servers use an NFS share on a NetApp for mail, Postfix servers are writting directly to inbox maildirs. Load balanced is maintaining afinity betwen client and server so i've got no problem with this for the moment. Now, i want to setup postfix (3 HW load balanced) for local delivery with LMTP on deovecot servers, and here come my questions. Afinity can't be maintained between IMAP and LMTP for a user with my load balancer so mail can be delivered on dovecot01 and read on dovecot02, from what i've read this can be an issue with indexes. I think i need to setup a director to maintain LMTP and IMAP afinity between users and servers but on imap servers i'm identifying user with their UID, and LMTP need to see emails. Does dovecot see the same user or 2 users with the same homedir? So my question is: could you point me to the right direction with this setup, do you have any advice on this config. Actual configurations: (postlogin not in real use, just a touch on (imap/pop3)_last_login) POP/IMAP server: dovecot01# doveconf -n # 2.1.15: /usr/local/etc/dovecot/dovecot.conf # OS: FreeBSD 8.3-RELEASE-p3 amd64 auth_cache_negative_ttl = 0 auth_cache_size = 10 M auth_mechanisms = plain login auth_verbose = yes default_client_limit = 1500 default_process_limit = 500 default_vsz_limit = 1 G disable_plaintext_auth = no dotlock_use_excl = no lock_method = dotlock mail_fsync = always mail_gid = vmail mail_location = maildir:%h/Maildir:INDEX=/mail_index%h mail_nfs_index = yes mail_nfs_storage = yes mail_plugins = " stats" mail_uid = vmail mmap_disable = yes namespace { inbox = yes location = prefix = INBOX. separator = . } passdb { args = /usr/local/etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { stats_refresh = 30 secs stats_track_cmds = yes } protocols = imap pop3 service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0666 user = postfix } user = $default_internal_user } service imap-postlogin { executable = script-login /usr/local/bin/imap-postlogin.sh user = vmail } service imap { executable = imap imap-postlogin process_limit = 1024 } service pop3-postlogin { executable = script-login /usr/local/bin/pop3-postlogin.sh user = vmail } service pop3 { executable = pop3 pop3-postlogin process_limit = 1024 } service stats { fifo_listener stats-mail { mode = 0600 user = vmail } } ssl_cert = </etc/ssl/cert/mail.univ-angers.fr.pem ssl_key = </etc/ssl/cert/mail.univ-angers.fr.key userdb { args = /usr/local/etc/dovecot/dovecot-ldap.conf.ext driver = ldap } protocol imap { mail_plugins = " stats imap_stats" } Postfix Test Server: %doveconf -n # 2.1.15: /usr/local/etc/dovecot/dovecot.conf # OS: FreeBSD 8.3-RELEASE-p3 amd64 auth_debug = yes auth_mechanisms = plain login auth_verbose = yes default_client_limit = 1500 default_process_limit = 500 default_vsz_limit = 512 M disable_plaintext_auth = no dotlock_use_excl = no lock_method = dotlock mail_fsync = always mail_gid = vmail mail_location = maildir:%h/Maildir:INDEX=/mail_index%h mail_nfs_index = yes mail_nfs_storage = yes mail_uid = vmail mmap_disable = yes namespace { inbox = yes location = prefix = INBOX. separator = . } passdb { args = /usr/local/etc/dovecot/dovecot-ldap.conf.ext driver = ldap } protocols = lmtp service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0666 user = postfix } unix_listener auth-userdb { user = vmail } user = $default_internal_user } service imap-postlogin { executable = script-login /usr/local/bin/imap-postlogin.sh user = vmail } service imap { executable = imap imap-postlogin process_limit = 1024 } service lmtp { inet_listener lmtp { address = * :: port = 24 } process_min_avail = 20 user = vmail } service pop3-postlogin { executable = script-login /usr/local/bin/pop3-postlogin.sh user = vmail } service pop3 { executable = pop3 pop3-postlogin process_limit = 1024 } ssl_cert = </etc/ssl/cert/mail.univ-angers.fr.pem ssl_key = </etc/ssl/cert/mail.univ-angers.fr.key userdb { args = /usr/local/etc/dovecot/dovecot-ldap.conf.ext driver = ldap } File dovecot-ldap.conf.ext uris = ldap://ldap.uang dn = cn=acces-smtp, ou=access, dc=univ-angers, dc=fr dnpass = ********** base = ou=people, dc=univ-angers, dc=fr user_attrs = homeDirectory=home user_filter = (&(|(uid=%u) (mail=%u) (auaAliasEmail=%u))(|(auaStatut=etu)(auaStatut=etu-sortant)(auaStatut=perso)(auaStatut=perso-sortant))) pass_attrs = uid=user,userPassword=password pass_filter = (&(|(uid=%u) (mail=%u) (auaAliasEmail=%u)) (|(auaStatut=etu)(auaStatut=etu-sortant)(auaStatut=perso) (auaStatut=perso-sortant))) iterate_attrs = uid=user iterate_filter = (|(auaStatut=etu)(auaStatut=etu-sortant)(auaStatut=perso)(auaStatut=perso-sortant)) default_pass_scheme = MD5-CRYPT

2 2

[Dovecot] An unconstructive grumble
by dd 03 Jun '13

03 Jun '13

5 hours of configuration attempts, error after confusing error, documentation with examples that only show extracts of working configurations. I really feel like throwing in the towel with dovecot. It should not be this hard and frankly almost impossible to understand and configure for such an incedibly simple configuration. /home/vmail/domain.name/username/cur /home/vmail/domain.name/username/new /home/vmail/domain.name/username/tmp 3 virtual users. All I want is a username and password to access my email. I have to have hit every error and problem there can be. No response at all from server, unable to find password file, unable to recognise user, invalid password. God it went on and on and on for five or more hours. For such a simple config. I know this is a totally unconstructive complaint and I should be taking the time to set out a careful explanation of my problem along with errors and logfiles but I just can't be bothered. I've tried so many many configurations and options and nothing works. How can it possibly be this hard to ghet some emails off the server with simple username/password configurations. Go ahead and flame me to a crisp. -- View this message in context: http://dovecot.2317879.n4.nabble.com/An-unconstructive-grumble-tp42598.html Sent from the Dovecot mailing list archive at Nabble.com.

7 7

[Dovecot] Settings: Dovecot + NTLM + Single Sing On + Windows + Outlook or Thunderbird.
by Maria Jose Yañez Dacosta 03 Jun '13

03 Jun '13

I am following the steps listed in: http://wiki.dovecot.org/HowTo/ActiveDirectoryNtlm My goal is to have single sign-on for Microsoft Outlook applications. I working and I have some doubts since I never set up an imap server, hope I can help :). The version that I have installed is devecot 2.0.9. "dovecot -n" shows the following: # 2.0.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-71.el6.x86_64 x86_64 CentOS release 6.4 (Final) auth_use_winbind = yes mbox_write_locks = fcntl passdb { driver = pam } protocols = imap pop3 ssl = no userdb { args = uid=10000 gid=10000 home=/mail/%d/%n driver = static } I show what I have in /etc/samba/smb.conf [global] workgroup = EJEMPLO realm = EJEMPLO.COM.UY server string = %h (Samba %v) security = ADS password server = ad.domain.dom username map = /etc/samba/mapeousuarios map untrusted to domain = Yes syslog = 0 log file = /var/log/samba/log.%m max log size = 1000 name resolve order = wins host bcast local master = No domain master = No dns proxy = No wins server = here active directory ip panic action = /usr/share/samba/panic-action %d winbind separator = + winbind use default domain = Yes winbind rpc only = Yes idmap config * : range = 1200-3000 idmap config * : backend = tdb [usuarios3] path = /exports/archivos-usuarios read only = No map acl inherit = Yes store dos attributes = Yes "wbinfo -g" and "wbinfo -u" work well. kinit Administrator work well also. Some steps of the configuration in dovecot.conf does not recognize: 1) "protocols = imap imaps pop3 pop3s". 2) "mechanisms = plain ntlm login". 3) "allow_all_users=yes" y "mail=maildir:/home/vmail/%d/%1Ln/%Ln:INBOX=/home/vmail/%d/%1Ln/%Ln". I'm not sure I should put in place. I also have some doubts: 1) I have to create a keytab file containing the principal for imap and pop?, as it would indicate Dovecot?. 2) That should indicate values uid y el gid? 3) I have to set something in pam? if I make "telnet localhost imap" shows the following: OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE AUTH=PLAIN] Dovecot ready NTLM not appears in the options. I hope I can shed some light on the subject :) Thanks and greetings. -- Maria José

2 5

[Dovecot] =Davide Pasquale=
by Davide Pasquale 02 Jun '13

02 Jun '13

http://archiv.isusice.eu/ewcyozyg/fltdigdpmijtefzkeuuepzdutvxu.hnfzuk

1 0

Re: [Dovecot] MS asks for feedback on standards support in Outlook/Exchange
by Robert Schetterer 01 Jun '13

01 Jun '13

Am 01.06.2013 13:40, schrieb Timo Sirainen: > On 1.6.2013, at 9.35, Robert Schetterer <rs(a)sys4.de> wrote: > >> Am 01.06.2013 00:28, schrieb Timo Sirainen: >>> Someone should at least mention that they should support the real SPECIAL-USE instead of just Gmail-specific XLIST.. >> >> i cant see any major Problems recent with i.e outlook 2013 and dovecot >> and SPECIAL-USE, perhaps look the screens at > > What about http://dovecot.org/list/dovecot/2013-May/090489.html ? > --- Outlook 2013 is only working when adding XLIST manually to imap_capability imap_capability = +XLIST --- i dont have this on my servers, and outlook 2013 works with special use as expected perhaps this helps http://social.technet.microsoft.com/Forums/de-DE/officeitpro/thread/eacaa11… --- You're welcome. Regarding your questions: Exchange 2010 and its supported (and unsupported and deviations from) IMAP standards are described on MS-STANXIMAP (MSDN). As far as I can tell, neither XLIST nor the enhanced (=extension of the standard) version of LIST is supported. Please keep in mind that this wouldn't matter very much, since most would connect to an Exchange 2010 server using either ActiveSync or MAPI/RPC. The following scenarios would definitely work: (A) your provider allows connections using ActiveSync (often referred to as "mobile" connection/access) and you're using Outlook 2013, (B) your provider allows connections using MAPI/RPC and you're using Outlook 2010. Outlook 2013 supports the extension specified in RFC 6154 and implements it using the XLIST command (as per MS-STANOIMAP), as documented in MS-STANOIMAP part 2.2.38; however, the LIST command in the same document doesn't mention the extension, so I'd assume it (Outlook 2013) doesn't necessarily support this feature using LIST as specified per RFC6154 (but only using explicitly XLIST.) Usually, any newer IMAP server supporting RFC6154 "LIST" ("XLIST") supports both the older XLIST as well as the newer LIST syntax. If it doesn't, a patch implementing this feature shouldn't be longer than a few (10 maybe?) lines of code and a few kind words to the developer team to get it into the next release of the server in question. --- http://msdn.microsoft.com/en-us/library/ee624430%28v=exchg.80%29.aspx ----------- V0061: The specification describes how to define an experimental command or any command that is not part of the specification. Microsoft Office Outlook 2007, Microsoft Outlook 2010 Outlook does not define any such commands. Microsoft Outlook 2013 Outlook 2013 implements the IMAP LIST extension specified in [RFC6154] as the XLIST command. --------------- so it may more a typical microsoft doku problem *g but however ,in fact no working trouble with dovecot SPECIAL-USE as far i remmeber to that list posting the problem whas there should get fixed was outlooks meaning of the Junk folder stuff, which is basicly done in another way by having its own antispam feature setup, so there are a few way to workaround that problem which i never tested and never will. My simple answer always is, Outlook is the client of exchange, with few stuff supporting normal internet mail ( imap etc ), dont use it with internet mail or live with its problems for notice Horde will implement Outlook 2013 complete active sync stack , so if that will happen, use active sync modus outlook 2013 with calender, abook, push mail , should no need for direct imap server con then, and it should "feel" like using exchnage ( but i think for one account only ), as horde has caldav and carddav , syncml too it can be used as middleware between many clients on many different os types i.e thunderbird lightning and k9 or native androids mail clients in exchange mode Best Regards MfG Robert Schetterer -- [*] sys4 AG http://sys4.de, +49 (89) 30 90 46 64 Franziskanerstraße 15, 81669 München Sitz der Gesellschaft: München, Amtsgericht München: HRB 199263 Vorstand: Patrick Ben Koetter, Axel von der Ohe, Marc Schiffbauer Aufsichtsratsvorsitzender: Florian Kirstein Best Regards MfG Robert Schetterer -- [*] sys4 AG http://sys4.de, +49 (89) 30 90 46 64 Franziskanerstraße 15, 81669 München Sitz der Gesellschaft: München, Amtsgericht München: HRB 199263 Vorstand: Patrick Ben Koetter, Axel von der Ohe, Marc Schiffbauer Aufsichtsratsvorsitzender: Florian Kirstein

1 1

[Dovecot] v2.2.2 (7b1152c83e3e) latest changes break LMTP
by Thomas Leuxner 01 Jun '13

01 Jun '13

Suppose this one breaks it: http://hg.dovecot.org/dovecot-2.2/rev/c4a85c9df948 ==> /var/log/mail.log <== Jun 1 14:01:30 spectre postfix/lmtp[456]: 3bN0qP5kwFzSy: to=<tlx(a)leuxner.net>, relay=spectre.leuxner.net[private/dovecot-lmtp], delay=1481, delays=1481/0/0.01/0.01, dsn=4.3.0, status=deferred (host spectre.leuxner.net[private/dovecot-lmtp] said: 451 4.3.0 <tlx(a)leuxner.net> Temporary internal error (in reply to end of DATA command)) ==> /var/log/dovecot/dovecot.log <== Jun 1 14:01:30 spectre dovecot: lmtp(523): Error: Can't open delivery mail as raw: Invalid mailbox name: Name is empty Regards Thomas

4 7