- dovecot - dovecot.org

[Dovecot] disable_plaintext_auth = no as no effect on IMAP/POP3 logins
by Mikkel 14 Jun '12

14 Jun '12

Hello In my installation the disable_plaintext_auth does not appear to take effect. I can see that the value is correct using doveconf -a but it doesn't change anything. Whenever attempting to log in using IMAP I get this: * BAD [ALERT] Plaintext authentication not allowed without SSL/TLS, but your client did it anyway. If anyone was listening, the password was exposed. ls NO [PRIVACYREQUIRED] Plaintext authentication disallowed on non-secure (SSL/TLS) connections. POP3 login attempts give this error: -ERR Plaintext authentication disallowed on non-secure (SSL/TLS) connections Besides adding disable_plaintext_auth=no to dovecot.conf I also tried adding it specifically to the imap section. I also tried to invoke it just for certain networks, like this: remote 0.0.0.0 { disable_plaintext_auth = no } But none of this takes any effect either. Adding the testing network as trusted networks is working fine removing the error. But I would rather not add the whole internet to the trusted network section just to allow plain text logins in imap. I'm in the process of migrating form 1.1 to 2.1 so this configuration is for testing things out and is mainly based on the default configuration files comming with the centos installation. I should add that everything else in this setup is working fine. I did many searches for information on this topic but nothing I could find apply to my case. I'm sorry to post such a long conf but I'm not sure what parts I could have safely omitted. Here goes: # doveconf -a # 2.1.1: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-220.17.1.el6.x86_64 x86_64 CentOS release 6.2 (Final) auth_anonymous_username = anonymous auth_cache_negative_ttl = 2 mins auth_cache_size = 0 auth_cache_ttl = 2 mins auth_debug = no auth_debug_passwords = no auth_default_realm = plain auth_failure_delay = 2 secs auth_first_valid_uid = 500 auth_gssapi_hostname = auth_krb5_keytab = auth_last_valid_uid = 0 auth_master_user_separator = auth_mechanisms = plain auth_realms = plain login digest-md5 cram-md5 apop ntlm auth_socket_path = auth-userdb auth_ssl_require_client_cert = no auth_ssl_username_from_cert = no auth_use_winbind = no auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@ auth_username_format = %Lu auth_username_translation = auth_verbose = no auth_verbose_passwords = no auth_winbind_helper_path = /usr/bin/ntlm_auth auth_worker_max_count = 30 base_dir = /var/run/dovecot config_cache_size = 1 M debug_log_path = default_client_limit = 1000 default_idle_kill = 1 mins default_internal_user = dovecot default_login_user = dovenull default_process_limit = 100 default_vsz_limit = 256 M deliver_log_format = msgid=%m: %$ dict_db_config = director_doveadm_port = 0 director_mail_servers = director_servers = director_user_expire = 15 mins disable_plaintext_auth = no dotlock_use_excl = no doveadm_allowed_commands = doveadm_password = doveadm_proxy_port = 0 doveadm_socket_path = doveadm-server doveadm_worker_count = 0 dsync_alt_char = _ first_valid_gid = 1 first_valid_uid = 105 hostname = usrmta01.talkactive.net imap_capability = imap_client_workarounds = imap_id_log = imap_id_send = imap_idle_notify_interval = 2 mins imap_logout_format = in=%i out=%o imap_max_line_length = 64 k imapc_host = imapc_master_user = imapc_password = imapc_port = 143 imapc_rawlog_dir = imapc_ssl = no imapc_ssl_ca_dir = imapc_ssl_verify = yes imapc_user = %u import_environment = TZ info_log_path = /var/log/dovecot/dovecot.run instance_name = dovecot last_valid_gid = 0 last_valid_uid = 0 lda_mailbox_autocreate = no lda_mailbox_autosubscribe = no lda_original_recipient_header = libexec_dir = /usr/libexec/dovecot listen = *, :: lmtp_proxy = no lmtp_save_to_detail_mailbox = no lock_method = fcntl log_path = /var/log/dovecot/dovecot.err log_timestamp = "%b %d %H:%M:%S " login_access_sockets = login_greeting = Dovecot ready. login_log_format = %$: %s login_log_format_elements = user=<%u> method=%m rip=%r lip=%l mpid=%e %c login_trusted_networks = mail_access_groups = mail_attachment_dir = mail_attachment_fs = sis posix mail_attachment_hash = %{sha1} mail_attachment_min_size = 128 k mail_cache_fields = flags mail_cache_min_mail_count = 0 mail_chroot = mail_debug = no mail_fsync = always mail_full_filesystem_access = no mail_gid = mail_home = mail_location = mail_log_prefix = "%s(%u): " mail_max_keyword_length = 50 mail_max_lock_timeout = 0 mail_max_userip_connections = 10 mail_never_cache_fields = imap.envelope mail_nfs_index = yes mail_nfs_storage = yes mail_plugin_dir = /usr/lib64/dovecot mail_plugins = quota mail_prefetch_count = 0 mail_privileged_group = mail_save_crlf = no mail_temp_dir = /tmp mail_uid = mailbox_idle_check_interval = 30 secs mailbox_list_index = no maildir_broken_filename_sizes = no maildir_copy_with_hardlinks = yes maildir_stat_dirs = no maildir_very_dirty_syncs = no master_user_separator = mbox_dirty_syncs = yes mbox_dotlock_change_timeout = 2 mins mbox_lazy_writes = yes mbox_lock_timeout = 5 mins mbox_md5 = apop3d mbox_min_index_size = 0 mbox_read_locks = fcntl mbox_very_dirty_syncs = no mbox_write_locks = fcntl mdbox_preallocate_space = no mdbox_rotate_interval = 0 mdbox_rotate_size = 2 M mmap_disable = yes namespace inbox { hidden = no ignore_on_failure = no inbox = yes list = yes location = mailbox Drafts { auto = no special_use = \Drafts } mailbox Junk { auto = no special_use = \Junk } mailbox Sent { auto = no special_use = \Sent } mailbox "Sent Messages" { auto = no special_use = \Sent } mailbox Trash { auto = no special_use = \Trash } prefix = separator = subscriptions = yes type = private } passdb { args = /local/config/dovecot-sql.conf default_fields = deny = no driver = sql master = no override_fields = pass = no } plugin { quota = maildir quota_rule2 = Trash:storage=+10M:messages=+100 quota_warning = storage=80%% /local/scripts/quota-warning.sh 80 sieve_extensions = +imapflags +notify trash = /local/config/dovecot-trash.conf } pop3_client_workarounds = pop3_enable_last = no pop3_fast_size_lookups = no pop3_lock_session = no pop3_logout_format = top=%t/%p, retr=%r/%b, del=%d/%m, size=%s pop3_no_flag_updates = no pop3_reuse_xuidl = no pop3_save_uidl = no pop3_uidl_format = %08Xu%08Xv pop3c_host = pop3c_password = pop3c_port = 110 pop3c_rawlog_dir = pop3c_ssl = no pop3c_ssl_ca_dir = pop3c_ssl_verify = yes pop3c_user = %u postmaster_address = protocols = imap pop3 lmtp quota_full_tempfail = no recipient_delimiter = + rejection_reason = Your message to <%t> was automatically rejected:%n%r rejection_subject = Rejected: %s sendmail_path = /usr/sbin/sendmail service anvil { chroot = empty client_limit = 0 drop_priv_before_exec = no executable = anvil extra_groups = group = idle_kill = 4294967295 secs privileged_group = process_limit = 1 process_min_avail = 1 protocol = service_count = 0 type = anvil unix_listener anvil-auth-penalty { group = mode = 0600 user = } unix_listener anvil { group = mode = 0600 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service auth-worker { chroot = client_limit = 1 drop_priv_before_exec = no executable = auth -w extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 1 type = unix_listener auth-worker { group = mode = 0600 user = $default_internal_user } user = $default_internal_user vsz_limit = 18446744073709551615 B } service auth { chroot = client_limit = 0 drop_priv_before_exec = no executable = auth extra_groups = group = idle_kill = 0 privileged_group = process_limit = 1 process_min_avail = 0 protocol = service_count = 0 type = unix_listener /var/spool/postfix/private/auth { group = mode = 0666 user = } unix_listener auth-client { group = mode = 0600 user = } unix_listener auth-login { group = mode = 0600 user = $default_internal_user } unix_listener auth-master { group = mode = 0600 user = } unix_listener auth-userdb { group = mode = 0666 user = } unix_listener login/login { group = mode = 0666 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service config { chroot = client_limit = 0 drop_priv_before_exec = no executable = config extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 0 type = config unix_listener config { group = mode = 0600 user = } user = vsz_limit = 18446744073709551615 B } service dict { chroot = client_limit = 1 drop_priv_before_exec = no executable = dict extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 0 type = unix_listener dict { group = mode = 0600 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service director { chroot = . client_limit = 0 drop_priv_before_exec = no executable = director extra_groups = fifo_listener login/proxy-notify { group = mode = 00 user = } group = idle_kill = 4294967295 secs inet_listener { address = port = 0 ssl = no } privileged_group = process_limit = 1 process_min_avail = 0 protocol = service_count = 0 type = unix_listener director-admin { group = mode = 0600 user = } unix_listener director-userdb { group = mode = 0600 user = } unix_listener login/director { group = mode = 00 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service dns_client { chroot = client_limit = 1 drop_priv_before_exec = no executable = dns-client extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 0 type = unix_listener dns-client { group = mode = 0666 user = } unix_listener login/dns-client { group = mode = 0666 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service doveadm { chroot = client_limit = 1 drop_priv_before_exec = no executable = doveadm-server extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 1 type = unix_listener doveadm-server { group = mode = 0600 user = } user = vsz_limit = 18446744073709551615 B } service imap-login { chroot = login client_limit = 0 drop_priv_before_exec = no executable = imap-login extra_groups = group = idle_kill = 0 inet_listener imap { address = port = 143 ssl = no } inet_listener imaps { address = port = 993 ssl = yes } privileged_group = process_limit = 0 process_min_avail = 0 protocol = imap service_count = 0 type = login user = $default_login_user vsz_limit = 256 M } service imap { chroot = client_limit = 1 drop_priv_before_exec = no executable = imap extra_groups = group = idle_kill = 0 privileged_group = process_limit = 1024 process_min_avail = 0 protocol = imap service_count = 1 type = unix_listener login/imap { group = mode = 0666 user = } user = vsz_limit = 256 M } service indexer-worker { chroot = client_limit = 1 drop_priv_before_exec = no executable = indexer-worker extra_groups = group = idle_kill = 0 privileged_group = process_limit = 10 process_min_avail = 0 protocol = service_count = 0 type = unix_listener indexer-worker { group = mode = 0600 user = $default_internal_user } user = vsz_limit = 18446744073709551615 B } service indexer { chroot = client_limit = 0 drop_priv_before_exec = no executable = indexer extra_groups = group = idle_kill = 0 privileged_group = process_limit = 1 process_min_avail = 0 protocol = service_count = 0 type = unix_listener indexer { group = mode = 0666 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service ipc { chroot = empty client_limit = 0 drop_priv_before_exec = no executable = ipc extra_groups = group = idle_kill = 0 privileged_group = process_limit = 1 process_min_avail = 0 protocol = service_count = 0 type = unix_listener ipc { group = mode = 0600 user = } unix_listener login/ipc-proxy { group = mode = 0600 user = $default_login_user } user = $default_internal_user vsz_limit = 18446744073709551615 B } service lmtp { chroot = client_limit = 1 drop_priv_before_exec = no executable = lmtp extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = lmtp service_count = 0 type = unix_listener lmtp { group = mode = 0666 user = } user = vsz_limit = 18446744073709551615 B } service log { chroot = client_limit = 0 drop_priv_before_exec = no executable = log extra_groups = group = idle_kill = 4294967295 secs privileged_group = process_limit = 1 process_min_avail = 0 protocol = service_count = 0 type = log unix_listener log-errors { group = mode = 0600 user = } user = vsz_limit = 18446744073709551615 B } service pop3-login { chroot = login client_limit = 0 drop_priv_before_exec = no executable = pop3-login extra_groups = group = idle_kill = 0 inet_listener pop3 { address = port = 110 ssl = no } inet_listener pop3s { address = port = 995 ssl = yes } privileged_group = process_limit = 0 process_min_avail = 0 protocol = pop3 service_count = 1 type = login user = $default_login_user vsz_limit = 18446744073709551615 B } service pop3 { chroot = client_limit = 1 drop_priv_before_exec = no executable = pop3 extra_groups = group = idle_kill = 0 privileged_group = process_limit = 1024 process_min_avail = 0 protocol = pop3 service_count = 1 type = unix_listener login/pop3 { group = mode = 0666 user = } user = vsz_limit = 18446744073709551615 B } service ssl-params { chroot = client_limit = 0 drop_priv_before_exec = no executable = ssl-params extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 0 type = startup unix_listener login/ssl-params { group = mode = 0666 user = } user = vsz_limit = 18446744073709551615 B } service stats { chroot = empty client_limit = 0 drop_priv_before_exec = no executable = stats extra_groups = fifo_listener stats-mail { group = mode = 0600 user = } group = idle_kill = 4294967295 secs privileged_group = process_limit = 1 process_min_avail = 0 protocol = service_count = 0 type = unix_listener stats { group = mode = 0600 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } shutdown_clients = yes ssl = required ssl_ca = ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_cert_username_field = commonName ssl_cipher_list = ALL:!LOW:!SSLv2:!EXP:!aNULL ssl_client_cert = ssl_client_key = ssl_crypto_device = ssl_key = </etc/pki/dovecot/private/dovecot.pem ssl_key_password = ssl_parameters_regenerate = 1 weeks ssl_protocols = !SSLv2 ssl_verify_client_cert = no stats_command_min_time = 1 mins stats_domain_min_time = 12 hours stats_ip_min_time = 12 hours stats_memory_limit = 16 M stats_session_min_time = 15 mins stats_user_min_time = 1 hours submission_host = syslog_facility = mail userdb { args = default_fields = driver = prefetch override_fields = } userdb { args = /local/config/dovecot-sql.conf default_fields = driver = sql override_fields = } valid_chroot_dirs = verbose_proctitle = no verbose_ssl = no version_ignore = no protocol lda { mail_plugins = quota quota sieve trash } protocol imap { imap_client_workarounds = delay-newmail tb-extra-mailbox-sep tb-lsub-flags imap_logout_format = bytes=%i/%o mail_plugins = quota quota imap_quota trash } protocol pop3 { mail_plugins = quota quota pop3_logout_format = top=%t/%p, retr=%r/%b, del=%d/%m, size=%s pop3_uidl_format = %08Xu%08Xv } Regards, Mikkel

1 1

[Dovecot] Please help me out.
by neeraj gupta 13 Jun '12

13 Jun '12

Hi Sir/Madam, I am using dovecot with postfix email server to deliver our mails. Our requirement is to save mail file with different name. So Please help me to locate the module which save mail to inbox. -- -- Thanks & regards Neeraj Gupta Software Engineer Email Id : neeraj6117(a)gmail.com Mo:+91-9990366116

2 1

[Dovecot] doveadm doesn't subscribe to public folders
by Emiliano Rago 13 Jun '12

13 Jun '12

Hi, I'd like to subscribe folder with doveadm: doveadm mailbox subscribe -u rago public.Conferences This command doesn't work, while it works with an ordinary folder. However it's possible to subscribe to the folder with an imap connection: 1 login rago "mypasswd" 1 OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE SORTSORT=DISPLAY THREAD=REFERENCES THREAD=REFS MULTIAPPEND UNSELECT CHILDREN NAMESPCE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES ITHIN CONTEXT=SEARCH LIST-STATUS ACL RIGHTS=texk] Logged in 2 LSUB "" * * LSUB () "." "INBOX" 2 OK Lsub completed. 3 SUBSCRIBE "public.Conferences" 3 OK Subscribe completed. 4 LSUB "" * * LSUB () "." "INBOX" * LSUB () "." "public.Conferences" 4 OK Lsub completed. Am I doing anything wrong? This is my conf, thx for help, Emiliano # 2.0.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-220.4.1.el6.x86_64 x86_64 Red Hat Enterprise Linux Server release 5 (Tikanga) ext4 auth_cache_size = 128 M auth_master_user_separator = * auth_mechanisms = plain cram-md5 mail_location = maildir:/data/MAIL/MAILDIR/%u:INBOX=/data/MAIL/INBOX/%u:INDEX=/data/MAIL/METADATA/%u maildir_very_dirty_syncs = yes managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date mbox_write_locks = fcntl namespace { inbox = yes location = prefix = separator = . type = private } namespace { list = children location = maildir:/data/MAIL/MAILDIR/%%u:INDEX=/data/MAIL/METADATA/SHARED/%u/%%u prefix = shared.%%u. separator = . subscriptions = no type = shared } namespace { list = children location = maildir:/data/MAIL/PUBLIC:INDEX=/data/MAIL/METADATA/PUBLIC prefix = public. separator = . subscriptions = no type = public } passdb { args = scheme=cram-md5 /data/PWDDB/cram_dovecot.txt driver = passwd-file } passdb { args = /etc/dovecot/master-shared driver = passwd-file master = yes } passdb { args = /etc/dovecot/master-shared driver = passwd-file } plugin { acl = vfile:/etc/dovecot/global-acls:cache_secs=300 acl_anyone = allow acl_shared_dict = file:/data/MAIL/SHAREDDB/shared-mailboxes.db sieve = /data/MAIL/SIEVE/%u/dovecot.sieve sieve_dir = /data/MAIL/SIEVE/%u } postmaster_address = root protocols = imap sieve service auth { unix_listener /var/spool/postfix/private/auth { mode = 0666 } unix_listener auth-userdb { group = mailreader mode = 0600 user = mailreader } } service imap-login { process_min_avail = 8 service_count = 0 vsz_limit = 512 M } service imap-postlogin { executable = script-login /etc/dovecot/postlogin.sh user = $default_internal_user } service imap { executable = imap imap-postlogin } ssl_cert = </etc/dovecot/ssl/imaps.lal.in2p3.fr.crt ssl_key = </etc/dovecot/ssl/imaps.lal.in2p3.fr.key userdb { args = /etc/dovecot/master-shared driver = passwd-file } userdb { args = uid=mailreader gid=mailreader home=/data/MAIL/SIEVE/%u allow_all_users=yes driver = static } protocol lda { mail_plugins = acl sieve } protocol imap { mail_max_userip_connections = 128 mail_plugins = acl imap_acl }

2 4

[Dovecot] question about changing certificate
by oni-neko＠gmx.net 13 Jun '12

13 Jun '12

Good day! I'm having trouble changing certificate/keys for my dovecot(version 1.2.9). When I set up the server (unbuntu lts 10.4.4) I did it with a self-signed certificate. I can't remember exactly what I did, just that I followed the wiki and it worked fine =) Now I have to change the certificate because a friend bought an official one (from thawte) and I'm a bit stumped. As dovecot can use supposedly use the same file for both key and cert file, I copied the new certificate to /etc/ssl/private/dovecot.pem and to /etc/ssl/certs/dovecot.pem. next I get from managesieve-login, pop3-login and imap-login the following log entries: Fatal: Can't load private key file /etc/ssl/private/dovecot.pem: Key is for a different cert than /etc/ssl/certs/dovecot.pem some googling brought up the file ssl-cert-snakeoil.key in /etc/ssl/private and /etc/ssl/certs that some people change in that context. As I also have a symlink /etc/ssl/private/ssl-mail.key that points to /etc/ssl/private/ssl-cert-snakeoil.key I'm starting to be confused (even more). dovecot is using the dovecot.pem-files, who/what uses the ssl-mail.key? I'm pretty sure I'm just overlooking something completely obvious, but what? =) greetings silvia -- NEU: FreePhone 3-fach-Flat mit kostenlosem Smartphone! Jetzt informieren: http://mobile.1und1.de/?ac=OM.PW.PW003K20328T7073a

2 3

[Dovecot] v2.0.21 released
by Timo Sirainen 12 Jun '12

12 Jun '12

http://dovecot.org/releases/2.0/dovecot-2.0.21.tar.gz http://dovecot.org/releases/2.0/dovecot-2.0.21.tar.gz.sig + dict: file backend supports now also fcntl/flock locking optionally - imap-login: Memory leak fixed - imap: Non-UTF8 input on SEARCH command parameters could have crashed - auth: Fixed crash with DIGEST-MD5 when attempting to do master user login without master passdbs. - sdbox: Don't use more fds than necessary when copying mails. - mdbox kept the user's storage locked a bit longer than it needed to

4 3

[Dovecot] 2.1.7 shared folder index issued
by Alex Crow 12 Jun '12

12 Jun '12

Hi, Sorry to bother the list again so soon after fixing my own problem, but I now have this issue when clients try to view shared folders in Thunderbird (v12). They can see the shared folder, but the first time they click on in nothing happens. The second time they get an authentication failure. The third or fourth time it finally loads the shared mailbox, and I see this a few times in the logs: Jun 11 19:57:43 alsace dovecot: imap(sharedviewer(a)integrafin.co.uk): Error: mdbox map /home/indexes/integrafin.co.uk/t/sharedviewer/shared/sharedviewee(a)integrafin.co.uk/storage/dovecot.map.index corrupted: U nexpectedly lost shared/viewee(a)integrafin.co.uk/INBOX uid=73129 map_uid=74192 Jun 11 19:57:43 alsace dovecot: imap(sharedviewer(a)integrafin.co.uk): Disconnected: Internal error occurred. Refer to server log for more information. [2012-06-11 19:57:43] in=308 out=820 Jun 11 19:57:43 alsace dovecot: auth: Debug: auth client connected (pid=1957) Ideally I'd like shared mailboxes to work in the first click - any ideas? Cheers Alex

2 4

[Dovecot] gnutls support
by Daniel L. Miller 12 Jun '12

12 Jun '12

Other than license issues, is there an advantage to using gnutls vs openssl? Or is openssl superior - at least in the current implementations? -- Daniel

2 3

[Dovecot] auth_krb5_keytab ignored ?
by Leon Meßner 12 Jun '12

12 Jun '12

Hi list, i noticed that when doing imap gssapi authentication with kerberos, dovecot (here 2.1.7) always searches /etc/krb5.keytab although i have auth_krb5_keytab = /etc/mail3.krb5.keytab in my etc/dovecot/dovecot.conf and doveconf -n also show this setting. If i combine the keytabs in krb5.keytab it works. Is there another location where i should put my configuration regarding gssapi/kerberos ? Thanks, Leon logs: 18:48_root@mail3:/root# cat /var/log/dovecot.log | tail -n 8 Jun 08 18:48:16 auth: Debug: client in: AUTH 1 GSSAPI service=imap secured session=gexTxPjBZACClTqR lip=130.149.58.164 rip=130.149.58.145 lport=993 rport=31076 Jun 08 18:48:16 auth: Debug: gssapi(?,130.149.58.145,<gexTxPjBZACClTqR>): Obtaining credentials for imap(a)mail3.physik-pool.tu-berlin.de Jun 08 18:48:16 auth: Debug: client out: CONT 1 Jun 08 18:48:16 auth: Debug: client in: CONT<hidden> Jun 08 18:48:16 auth: Info: gssapi(?,130.149.58.145,<gexTxPjBZACClTqR>): While processing incoming data: Miscellaneous failure (see text) Jun 08 18:48:16 auth: Info: gssapi(?,130.149.58.145,<gexTxPjBZACClTqR>): While processing incoming data: Failed to find imap/mail3.physik-pool.tu-berlin.de(a)PCPOOL.PHYSIK.TU-BERLIN.DE(kvno 1) in keytab FILE:/etc/krb5.keytab (des3-cbc-sha1) Jun 08 18:48:18 auth: Debug: client out: FAIL 1 Jun 08 18:48:23 imap-login: Info: Aborted login (auth failed, 1 attempts in 7 secs): user=<>, method=GSSAPI, rip=130.149.58.145, lip=130.149.58.164, TLS, session=<gexTxPjBZACClTqR> # 2.1.7: /usr/local/etc/dovecot/dovecot.conf # OS: FreeBSD 8.2-RELEASE-p3 amd64 auth_debug = yes auth_gssapi_hostname = mail3.physik-pool.tu-berlin.de auth_krb5_keytab = /etc/mail3.krb5.keytab auth_mechanisms = gssapi plain login auth_verbose = yes auth_worker_max_count = 120 first_valid_gid = 300 first_valid_uid = 200 lda_mailbox_autocreate = yes listen = mail3.physik.tu-berlin.de log_path = /var/log/dovecot.log mail_fsync = always mail_location = maildir:~/maildir mail_nfs_index = yes mail_nfs_storage = yes mail_privileged_group = mail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave mmap_disable = yes namespace { inbox = yes location = prefix = separator = / type = private } namespace { location = mbox:~/mail prefix = mail/ separator = / type = private } passdb { args = session=yes failure_show_msg=yes max_requests=100 dovecot driver = pam } plugin { quota = fs sieve = ~/.dovecot.sieve sieve_dir = ~/.sieve } protocols = imap pop3 service auth { unix_listener auth-client { mode = 0660 } unix_listener auth-master { mode = 0600 } user = root } service imap-login { inet_listener imap { port = 0 } process_limit = 256 process_min_avail = 6 } service managesieve-login { process_limit = 256 process_min_avail = 6 } service pop3-login { inet_listener pop3 { port = 0 } process_limit = 256 process_min_avail = 6 } ssl_cert = </etc/private/mail3.physik.tu-berlin.de.pem ssl_key = </etc/private/physik.tu-berlin.de_privatekey.pem userdb { args = blocking=yes driver = passwd } verbose_proctitle = yes protocol lda { info_log_path = /var/log/dovecot-lda.log log_path = /var/log/dovecot-lda.log mail_plugins = " sieve quota" }

2 5

[Dovecot] Sieve: Mailbox doesn't exist
by Stefan Fricke 12 Jun '12

12 Jun '12

I have just set up a mail server on Ubuntu, using Postfix and Dovecot 2.0.19. It works well but I can't get Sieve working. I always get the error that the target mailbox doesn't exist. In fact it doesn't but isn'r Dovecot supposed to create it? Here is my doveconf -n: # 2.0.19: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-24-generic x86_64 Ubuntu 12.04 LTS mail_debug = yes mail_location = maildir:~/Maildir managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave passdb { driver = pam } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } protocols = imap pop3 sieve service auth { unix_listener /var/spool/postfix/private/dovecot-auth { group = postfix mode = 0660 user = postfix } } service managesieve-login { inet_listener sieve { port = 4190 } service_count = 1 } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_cipher_list = ALL:!LOW:!SSLv2:ALL:!aNULL:!ADH:!eNULL:!EXP:RC4+RSA:+HIGH: +MEDIUM ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = passwd } protocol imap { imap_client_workarounds = delay-newmail mail_max_userip_connections = 10 } protocol pop3 { mail_max_userip_connections = 10 pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } protocol lda { deliver_log_format = msgid=%m: %$ mail_plugins = sieve postmaster_address = postmaster quota_full_tempfail = yes rejection_reason = Your message to <%t> was automatically rejected:%n%r }

3 2

[Dovecot] commercial support -- feedback
by Костырев Александр Алексеевич 12 Jun '12

12 Jun '12

good day! Did anybody in here decide to go for commercial support from Dovecot Solutions Oy ? I'd like to know if you are satisfied with what they provide? if time of support reaction is really as what is stated at their site and stuff like that.

1 0

[Dovecot] Authentication issue
by Emiliano Rago 12 Jun '12

12 Jun '12

Hi, I need to set up a weird dovecot configuration: 1) outside a ssl tunnel I'd like to authenticate only with cram-md5 scheme 2) inside a ssl tunnel I'd like to authenticate only with plain auth The first is easily satisfied with auth_mechanisms = plain cram-md5 disable_plaintext_auth = yes but I don't know how to satisfy the second condition, if it's possible. Thanks for help, Emiliano Rago

2 2

[Dovecot] Getting duplicates despite trying hard to match lock styles
by Richard Walker 12 Jun '12

12 Jun '12

I'm attempting to replace (a) a very old setup that has POP (qpopper) access to inboxes and a separate UW IMAP server that provides folders, with (b) a shiny new mail setup with dovecot providing both inboxes and IMAP support. For the new mail server I created a virtual machine running a minimal Fedora 16 installation and installed sendmail, MIMEDefang, SpamAssassin, ClamAV, procmail, and dovecot. I have kept installing updates as they become available. For now I'm running the old and new mail setups in parallel; I have configured the original sendmail server to forward copies of incoming messages to the new sendmail running on the virtual machine. I then compare the results (e.g., how spam filtering is working). I've kept as much as possible of the original _style_ of setup as possible, which in particular means using sendmail, and message delivery through procmail to mbox files in /var/spool/mail. The key difference is the use of dovecot to provide IMAP access to the inbox and IMAP folders. Because of the legacy setup, my desktop access to email is via Thunderbird 2.0.0.22 on a very old Mac PowerBook G4 to work with both old and new setups and I have two windows open to make comparison possible. (Yes, both mail servers are on separate computers, not on this notebook.) Mostly this is working fine (after a fair bit of tweaking, including adding custom SELinux rules to get rid of all AVCs). I put the notebook to sleep overnight, and in the morning I open it up and see what happens. After a few minutes, the window with the old setup does its POP fetch; the window with the new setup almost straightaway shows the new messages in its version of the inbox. Not quite: again, for legacy reasons I have some Thunderbird filters, and I have duplicated those (still within Thunderbird) for the new setup. The filters are: 1. Move messages tagged as spam by SpamAssassin to the Junk folder. 2. Move messages from GeoNetwork-related senders to a "GeoNetwork" folder. 3. Move all remaining messages to the "In" folder. Most mornings this works just fine. But not always. Sometimes I get duplicates in the "In" and "GeoNetwork" folders of the new dovecot-based setup. I used to get _garbled_ duplicates (with extra random bits of other messages at the end of the duplicates) in the new setup, which I presumed must be due to a locking configuration mismatch. Having fixed that (see below) I no longer get garbled duplicates, but I do still sometimes (including today) get identical duplicates. This seems to happen when one of the incoming messages has a very large attachment - but you may wish to treat that as hearsay. I attach below: 0. The line from /etc/mtab on the new server that covers the filesystem (i.e., including /var/spool and /home). 1. Output of "doveconf -n" and a note about how I modified locking from the Fedora default. 2. Output of "procmail -v". 3. Sendmail procmail mailer config (for good measure; I don't think you need this). 4. An excerpt from /var/log/maillog on the new server showing the beginning of dovecot processing this morning when I opened my notebook. 5. A link to the dovecot raw log files of my "INBOX" and "In" folder processing from this morning. You'll see from the dovecot log files that Thunderbird sends expunge commands, but the expunged messages hang around -- indeed, the same messages get expunged several times! And eventually they get fetched again -- hence the duplicates I see in Thunderbird. Given that INBOX.out contains: 08:56:53.765423 * 537 EXISTS 08:56:53.765423 * 533 RECENT and then, after many expunges: 08:56:58.441341 * 16 EXPUNGE 08:56:58.441341 * 11 EXPUNGE 08:56:58.441341 * 3 EXPUNGE 08:56:58.441341 * 539 EXISTS 08:56:58.441341 * 536 RECENT 08:56:58.441341 9 OK Expunge completed. it looks like I still have a locking problem. I have tried very hard to understand the locking options in dovecot.conf and to match dovecot with procmail -- apparently, there is more to do. 0. The line from /etc/mtab for the filesystem: ---------- /dev/mapper/vg_f16i386serverbasic-lv_root / ext4 rw,seclabel,relatime,user_xattr,acl,barrier=1,data=ordered 0 0 ---------- 1. doveconf -n says: ---------- # 2.0.20: /etc/dovecot/dovecot.conf # OS: Linux 3.3.6-3.fc16.i686.PAE i686 Fedora release 16 (Verne) mail_debug = yes mail_privileged_group = mail namespace { hidden = yes inbox = yes list = no location = mbox:~/mail:INBOX=/var/spool/mail/%u prefix = "#mbox/" separator = / type = private } namespace { inbox = no location = maildir:~/Maildir prefix = separator = / type = private } passdb { driver = pam } service imap-login { inet_listener imap { address = localhost } } service imap { executable = imap postlogin } service pop3-login { inet_listener pop3 { address = localhost } } service postlogin { executable = script-login -d rawlog -t } ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { driver = passwd } ---------- Note that the default Fedora installation specifies: mbox_write_locks = fcntl and I commented that out. This seems to restore the default setting of: mbox_write_locks = dotlock fcntl to match procmail. 2. procmail -v (run as me) says: ---------- procmail v3.22 2001/09/10 Copyright (c) 1990-2001, Stephen R. van den Berg <srb(a)cuci.nl> Copyright (c) 1997-2001, Philip A. Guenther <guenther(a)sendmail.com> Submit questions/answers to the procmail-related mailinglist by sending to: <procmail-users(a)procmail.org> And of course, subscription and information requests for this list to: <procmail-users-request(a)procmail.org> Locking strategies: dotlocking, fcntl() Default rcfile: $HOME/.procmailrc It may be writable by your primary group Your system mailbox: /var/spool/mail/rw ---------- (There is no $HOME/.procmailrc or other system-wide procmailrc.) 3. The mailer as defined in sendmail.cf says: ---------- Mlocal, P=/usr/bin/procmail, F=lsDFMAw5:/|@qSPfhn9, S=EnvFromL/HdrFromL, R=EnvToL/HdrToL, T=DNS/RFC822/X-Unix, A=procmail -t -Y -a $h -d $u ---------- 4. The relevant lines from /var/log/maillog: ---------- Jun 12 08:56:53 localhost dovecot: imap-login: Login: user=<rw>, method=PLAIN, rip=192.168.2.200, lip=192.168.2.188, mpid=21618, TLS Jun 12 08:56:53 localhost dovecot: imap(rw): Debug: Effective uid=1000, gid=100, home=/home/rw Jun 12 08:56:53 localhost dovecot: imap(rw): Debug: Namespace : type=private, prefix=#mbox/, sep=/, inbox=yes, hidden=yes, list=no, subscriptions=yes location=mbox:~/mail:INBOX=/var/spool/mail/rw Jun 12 08:56:53 localhost dovecot: imap(rw): Debug: fs: root=/home/rw/mail, index=, control=, inbox=/var/spool/mail/rw, alt= Jun 12 08:56:53 localhost dovecot: imap(rw): Debug: Namespace : type=private, prefix=, sep=/, inbox=no, hidden=no, list=yes, subscriptions=yes location=maildir:~/Maildir Jun 12 08:56:53 localhost dovecot: imap(rw): Debug: maildir++: root=/home/rw/Maildir, index=, control=, inbox=, alt= Jun 12 08:56:58 localhost dovecot: imap-login: Login: user=<rw>, method=PLAIN, rip=192.168.2.200, lip=192.168.2.188, mpid=21625, TLS Jun 12 08:56:58 localhost dovecot: imap(rw): Debug: Effective uid=1000, gid=100, home=/home/rw Jun 12 08:56:58 localhost dovecot: imap(rw): Debug: Namespace : type=private, prefix=#mbox/, sep=/, inbox=yes, hidden=yes, list=no, subscriptions=yes location=mbox:~/mail:INBOX=/var/spool/mail/rw Jun 12 08:56:58 localhost dovecot: imap(rw): Debug: fs: root=/home/rw/mail, index=, control=, inbox=/var/spool/mail/rw, alt= Jun 12 08:56:58 localhost dovecot: imap(rw): Debug: Namespace : type=private, prefix=, sep=/, inbox=no, hidden=no, list=yes, subscriptions=yes location=maildir:~/Maildir Jun 12 08:56:58 localhost dovecot: imap(rw): Debug: maildir++: root=/home/rw/Maildir, index=, control=, inbox=, alt= Jun 12 08:57:03 localhost dovecot: imap-login: Login: user=<rw>, method=PLAIN, rip=192.168.2.200, lip=192.168.2.188, mpid=21632, TLS Jun 12 08:57:03 localhost dovecot: imap(rw): Debug: Effective uid=1000, gid=100, home=/home/rw Jun 12 08:57:03 localhost dovecot: imap(rw): Debug: Namespace : type=private, prefix=#mbox/, sep=/, inbox=yes, hidden=yes, list=no, subscriptions=yes location=mbox:~/mail:INBOX=/var/spool/mail/rw Jun 12 08:57:03 localhost dovecot: imap(rw): Debug: fs: root=/home/rw/mail, index=, control=, inbox=/var/spool/mail/rw, alt= Jun 12 08:57:03 localhost dovecot: imap(rw): Debug: Namespace : type=private, prefix=, sep=/, inbox=no, hidden=no, list=yes, subscriptions=yes location=maildir:~/Maildir Jun 12 08:57:03 localhost dovecot: imap(rw): Debug: maildir++: root=/home/rw/Maildir, index=, control=, inbox=, alt= ---------- 5. dovecot raw logs for "INBOX" and "In". Because I have trouble comparing times in epoch format, I've run the logs through a little filter that replaces the timestamps at the beginning of each line with a timestamp in HH:MM:SS.nanosecond format in local time. I've carefully deleted lots of (what I hope are) lines you don't need from the logs. E.g., I deleted the middle section of a block of FETCH statements, leaving the first few and the last few. Please let me know if I deleted too much -- I was trying to be helpful. And of course I replaced e-mail address/subject lines/etc with XXXXXXXXXX. Although the Thunderbird filters are "supposed" to be run in the order I listed above, it seems that Thunderbird fetches all headers, works out what messages should be filtered to which folders, and then sends corresponding IMAP commands that copy the messages to the other folders in a _different_ order of the filters. (I.e., the INBOX log shows copy/store/expunge operations in the order "In", "Junk", then "GeoNetwork", rather than "Junk", "GeoNetwork", "In".) I have renamed the in/out log files as INBOX.in, INBOX.out, In.in, In.out and uploaded them to: https://sites.google.com/site/rwdownloadssite/dovecot-logs Thanks in advance to anyone who is willing to take a look and advise what I need to do.

1 1

[Dovecot] Dovecot auth process delays exiting if LDAPS passdb used
by SATOH Fumiyasu 11 Jun '12

11 Jun '12

Hi, I'm using Dovecot 2.1.6 and LDAP server as a backend for Postfix SMTP-Auth (SASL) on Debian GNU/Linux (wheezy), Solaris 10 and AIX 6.1/7.1. If Dovecot passdb is configured with LDAP (no TLS/SSL), it is no problem. But if Dovecot passdb is configured with LDAPS (or LDAP+TLS), Dovecot auth process has a problem that Dovecot auth delays exiting about between 20 and 60 seconds when Dovecot dovecot (master) process is already terminated by an administrator. Is this known problem? On AIX, this problem prevents restart Dovecot service by the following error: May 24 00:42:03 build-aix6 mail:warn|warning dovecot: master: Warning: Killed with signal 15 (by pid=11337890 uid=0 code=kill) May 24 00:42:10 build-aix6 mail:err|error dovecot: master: Error: service(auth): Socket already exists: /opt/osstech/var/run/dovecot/auth-login May 24 00:42:11 build-aix6 mail:crit dovecot: master: Fatal: Failed to start listeners My Dovecot 2.1.6 platforms are: * Debian GNU/Linux wheezy + OpenLDAP 2.4.28 (linked with GNU TLS 2.12.18) * Solaris 10 + OpenLDAP 2.4.26 (linked with OpenSSL 0.9.7) * AIX 6.1 + OpenLDAP 2.4.31 (linked with OpenSSL 1.0.0) * AIX 7.1 + OpenLDAP 2.4.28 (linked with OpenSSL 1.0.0) Because I see the problem on the all of above, there is a bug in Dovecot 2.1.6, I think. Thanks. -- -- Name: SATOH Fumiyasu (fumiyas @ osstech co jp) -- Business Home: http://www.OSSTech.co.jp/ -- Personal Home: http://www.SFO.jp/blog/

2 9

[Dovecot] fts_lucene crashing
by Joe Beaubien 11 Jun '12

11 Jun '12

I found this in mail.err. Anyone ever experience this? May 22 14:51:51 mba dovecot: imap(formulaire): Panic: file lucene-wrapper.cc: line 196: unreached May 22 14:51:51 mba dovecot: imap(formulaire): Error: Raw backtrace: /opt/dovecot-2.1.6-lucene/lib/dovecot/libdovecot.so.0(+0x4200a) [0x7f7e0edfd00a] -> /opt/dovecot-2.1.6-lucene/lib/dovecot/libdovecot.so.0(+0x4204e) [0x7f7e0edfd04e] -> /opt/dovecot-2.1.6-lucene/lib/dovecot/libdovecot.so.0(i_fatal+0) [0x7f7e0edd43c0] -> /opt/dovecot/lib/dovecot/lib21_fts_lucene_plugin.so(+0x850e) [0x7f7e0d57a50e] -> /opt/dovecot/lib/dovecot/lib21_fts_lucene_plugin.so(+0xa7be) [0x7f7e0d57c7be] -> /opt/dovecot/lib/dovecot/lib21_fts_lucene_plugin.so(+0xa952) [0x7f7e0d57c952] -> /opt/dovecot/lib/dovecot/lib21_fts_lucene_plugin.so(lucene_index_lookup+0x7b) [0x7f7e0d57ce0b] -> /opt/dovecot/lib/dovecot/lib21_fts_lucene_plugin.so(+0x73a7) [0x7f7e0d5793a7] -> /opt/dovecot/lib/dovecot/lib20_fts_plugin.so(fts_backend_lookup+0x63) [0x7f7e0d98ece3] -> /opt/dovecot/lib/dovecot/lib20_fts_plugin.so(+0xa32d) [0x7f7e0d99232d] -> /opt/dovecot/lib/dovecot/lib20_fts_plugin.so(fts_search_lookup+0xa6) [0x7f7e0d992a26] -> /opt/dovecot/lib/dovecot/lib20_fts_plugin.so(+0xba25) [0x7f7e0d993a25] -> /opt/dovecot-2.1.6-lucene/lib/dovecot/libdovecot-storage.so.0(mailbox_search_next_nonblock+0x27) [0x7f7e0f0c1957] -> dovecot/imap() [0x4158a7] -> dovecot/imap() [0x415c62] -> /opt/dovecot-2.1.6-lucene/lib/dovecot/libdovecot.so.0(io_loop_handle_timeouts+0xc4) [0x7f7e0ee09cd4] -> /opt/dovecot-2.1.6-lucene/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0x5b) [0x7f7e0ee0ac2b] -> /opt/dovecot-2.1.6-lucene/lib/dovecot/libdovecot.so.0(io_loop_run+0x28) [0x7f7e0ee09998] -> /opt/dovecot-2.1.6-lucene/lib/dovecot/libdovecot.so.0(master_service_run+0x13) [0x7f7e0edf6233] -> dovecot/imap(main+0x285) [0x4086e5] -> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xed) [0x7f7e0ea1f76d] -> dovecot/imap() [0x40885d] May 22 14:51:51 mba dovecot: imap(formulaire): Fatal: master: service(imap): child 32761 killed with signal 6 (core dumped) I get these errors very very often. When I look at lucene-wrapper.cc source code I see the following 196: if (uni_utf8_to_ucs4(str, &dest_arr) < 0) i_unreached(); Any ideas? -Joe

2 6

[Dovecot] Director problems
by Joseba Torre 11 Jun '12

11 Jun '12

Hi, I've just setup a testing enviroment for director, and it's not working as expected. I have just 1 director (called director) and 2 dovecot servers (dovecot1 and dovecot2); these are exact copies. First problem: when both dovecot servers are up, every imap connection is redirected to the same server as you can see here: $ sudo doveadm director map user mail server ip expire time <unknown> 158.227.4.186 2012-06-06 13:34:12 <unknown> 158.227.4.186 2012-06-06 13:34:27 <unknown> 158.227.4.186 2012-06-06 13:34:34 (I don't know if that <unknown> is good or not) I've tried with 3 different users and ips to no change, users are always directed to the same host. Second problem: if I try to add/remove/modify one of the dovecot servers, the output of doveadm director map/status seems to be ok, but any new user connection fails with this log: Jun 6 14:51:59 director dovecot: director: Warning: Delaying new user requests until ring is synced Jun 6 14:52:27 director dovecot: director: Error: director: User test1 host lookup failed: Timeout - queued for 30 secs (Ring not synced for 73 secs) Jun 6 14:52:31 director dovecot: imap-login: Aborted login (auth failed, 1 attempts in 34 secs): user=<>, method=PLAIN, rip=158.227.4.186, lip=158.227.4.185, TLS, session=<Oyx9O83B/wCe4wS6> Any clue? This is the dovecot config -n output: # 2.1.7: /usr/local/etc/dovecot/dovecot.conf # OS: Linux 2.6.32-220.17.1.el6.x86_64 x86_64 Red Hat Enterprise Linux Server release 6.2 (Santiago) director_mail_servers = dovecot1.example dovecot2.example director_servers = director.example lmtp_proxy = yes managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave passdb { args = proxy=y nopassword=y starttls=any-cert driver = static } service auth { unix_listener auth-userdb { group = mail mode = 0660 user = dovecot } } service director { fifo_listener login/proxy-notify { mode = 0666 } inet_listener { port = 9090 } unix_listener director-userdb { mode = 0600 } unix_listener login/director { mode = 0666 } } service imap-login { executable = imap-login director service_count = 0 } service lmtp { client_limit = 1 inet_listener lmtp { port = 24 } unix_listener /var/lib/dovecot/lmtp-socket { group = root mode = 0600 user = root } } service pop3-login { executable = pop3-login director service_count = 0 } service pop3 { process_limit = 5000 } shutdown_clients = no ssl_cert = </etc/ssl/private/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = passwd } verbose_proctitle = yes version_ignore = yes protocol lmtp { auth_socket_path = director-userdb } protocol imap { mail_max_userip_connections = 100 }

2 4

[Dovecot] multi-instance doveadm user -m woes
by David Warden 11 Jun '12

11 Jun '12

I'm having difficulty with the doveadm who command on a multi-instance setup of dovecot. When I run the who command on the non-standard instance with the -m flag (to see their mail location), this happens: [root@wardentest3 dovecot]# doveadm -i mailtest user -m warden doveadm(root): Error: user warden: Initialization failed: Namespace 'INBOX.': Ambiguous mail location setting, don't know what to do with it: /var/spool/mail/root (try prefixing it with mbox: or maildir:) I tried adding my mail_location setting as location to both of my legacy and default namespaces, but got the same error. I also tried adding the -a flag like so: doveadm user -a /var/run/dovecot/mailtest/auth-userdb -m warden doveadm(root): Error: userdb lookup: connect(/var/run/dovecot/auth-userdb) failed: Connection refused (the default instance is currently stopped) and combining -a and -i out of curiosity: [root@wardentest3 conf.d]# doveadm -i mailtest user -a /var/run/dovecot/mailtest/auth-userdb -m warden doveadm(root): Error: user warden: Initialization failed: Namespace 'INBOX.': Ambiguous mail location setting, don't know what to do with it: /var/spool/mail/root (try prefixing it with mbox: or maildir:) I have 2 instances, default and mailtest: [root@wardentest3 conf.d]# doveadm instance list path name last used running /var/run/dovecot/mailtest mailtest 2012-05-11 10:57:16 yes /var/run/dovecot default 2012-05-11 10:54:09 no my doveconf -n for the mailtest instance: # 2.1.6: mailtest/dovecot.conf doveconf: Warning: service auth { client_limit=4096 } is lower than required under max. load (12288) doveconf: Warning: service anvil { client_limit=4096 } is lower than required under max. load (12291) # OS: Linux 2.6.32-220.13.1.el6.x86_64 x86_64 Red Hat Enterprise Linux Server release 6.2 (Santiago) nfs auth_cache_negative_ttl = 0 auth_cache_size = 16 M auth_gssapi_hostname = $ALL auth_krb5_keytab = /etc/dovecot/mailtest/mail.combined.keytab auth_master_user_separator = * auth_mechanisms = plain login gssapi auth_username_format = %Ln base_dir = /var/run/dovecot/mailtest/ default_client_limit = 4096 default_process_limit = 4096 deliver_log_format = msgid="%m" subject="%s" from="%f" size=%p result="%$" first_valid_uid = 0 hostname = mailtest.geneseo.edu instance_name = mailtest lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes login_log_format_elements = user=%u method=%m rip=%r lip=%l lport=%a mpid=%e encryption=%c mail_fsync = always mail_location = maildir:/Mail/mailhome/%Ln/mailtest/Maildir:CONTROL=/Mail/mailhome/%Ln/mailtest/.dovecot-control:INDEX=/Mail/mailhome/%Ln/mailtest/.dovecot-index mail_log_prefix = "service=%s user=%u rip=%r " mail_nfs_index = yes mail_nfs_storage = yes mail_plugins = zlib quota mail_log notify fts fts_squat stats maildir_very_dirty_syncs = yes managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave mbox_write_locks = fcntl mmap_disable = yes namespace default { inbox = yes location = mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox Junk { auto = no special_use = \Junk } mailbox Sent { auto = subscribe special_use = \Sent } mailbox Trash { auto = subscribe special_use = \Trash } prefix = separator = . subscriptions = yes type = private } namespace legacy { alias_for = hidden = yes inbox = no list = no location = mailbox INBOX.Drafts { auto = no special_use = \Drafts } mailbox INBOX.Junk { auto = no special_use = \Junk } mailbox INBOX.Sent { auto = no special_use = \Sent } mailbox INBOX.Trash { auto = no special_use = \Trash } prefix = INBOX. separator = . type = private } passdb { args = /etc/dovecot/passwd.masterusers driver = passwd-file master = yes } passdb { args = cache_key=%u dovecot driver = pam } plugin { fts = squat mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename flag_change append mail_log_fields = uid box msgid size from subject flags mail_log_group_events = yes quota = maildir:User quota quota_exceeded_message = Quota exceeded (mailbox for user is full). Please see http://go.geneseo.edu/emailoverquota for help deleting messages while over quota. quota_rule = *:storage=200M quota_rule2 = Trash:storage=+50M sieve = /Mail/mailhome/%Ln/mailtest/.filter.sieve sieve_dir = /Mail/mailhome/%Ln/mailtest/.sievedir sieve_max_redirects = 25 stats_memory_limit = 32 M stats_refresh = 30 secs stats_track_cmds = yes } postmaster_address = postmaster(a)geneseo.edu protocols = imap sieve lmtp quota_full_tempfail = yes service auth { unix_listener auth-exim { group = exim mode = 0660 } } service doveadm { inet_listener { port = 12345 } } service imap-login { inet_listener imap { port = 1143 } inet_listener imaps { port = 1993 } service_count = 0 vsz_limit = 256 M } service imap { process_limit = 4096 } service lmtp { inet_listener lmtp { port = 124 } } service managesieve-login { inet_listener sieve { port = 14190 } inet_listener sieve_deprecated { port = 12000 } inet_listener sieves { port = 14191 ssl = yes } } service pop3 { process_limit = 4096 } service stats { fifo_listener stats-mail { mode = 0666 } } ssl_ca = </etc/pki/tls/certs/geotrust-intermediate.pem ssl_cert = </etc/pki/tls/certs/wildcard-geotrust.geneseo.edu.pem ssl_key = </etc/pki/tls/private/wildcard-geotrust.geneseo.edu.key userdb { driver = passwd } verbose_proctitle = yes protocol lmtp { mail_plugins = zlib quota mail_log notify fts fts_squat stats sieve } protocol lda { mail_location = maildir:/Mail/mailhome/%Ln/mailtest/Maildir:CONTROL=/Mail/mailhome/%Ln/mailtest/.dovecot-control:INDEX=/Mail/mailhome/%Ln/mailtest/.dovecot-index mail_plugins = zlib quota mail_log notify fts fts_squat stats sieve plugin { quota = maildir:User quota quota_rule = *:storage=200M quota_rule2 = Trash:storage=+50M zlib_save = gz zlib_save_level = 6 } } protocol imap { imap_logout_format = bytes(in/out)=%i/%o mail_max_userip_connections = 50 mail_plugins = zlib quota mail_log notify fts fts_squat stats imap_quota imap_zlib imap_stats } protocol sieve { managesieve_logout_format = bytes(in/out)=%i/%o } protocol pop3 { pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_logout_format = bytes(in/out)=%i/%o, top=%t/%p, retr=%r/%b, del=%d/%m, mailbox-size=%s pop3_uidl_format = UID%u-%v } remote 137.238.0.0/16/16 { disable_plaintext_auth = no } local 137.238.2.0/24/24 { doveadm_password = *scrub* } …and for the default instance: # 2.1.6: /etc/dovecot/dovecot.conf doveconf: Warning: service auth { client_limit=4096 } is lower than required under max. load (12288) doveconf: Warning: service anvil { client_limit=4096 } is lower than required under max. load (12291) # OS: Linux 2.6.32-220.13.1.el6.x86_64 x86_64 Red Hat Enterprise Linux Server release 6.2 (Santiago) nfs auth_cache_negative_ttl = 0 auth_cache_size = 16 M auth_gssapi_hostname = $ALL auth_krb5_keytab = /etc/dovecot/mailtest.combined.keytab auth_master_user_separator = * auth_mechanisms = plain login auth_username_format = %Ln default_client_limit = 4096 default_process_limit = 4096 deliver_log_format = msgid="%m" subject="%s" from="%f" size=%p result="%$" first_valid_uid = 0 hostname = mail.geneseo.edu instance_name = default lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes login_log_format_elements = user=%u method=%m rip=%r lip=%l lport=%a mpid=%e encryption=%c mail_location = maildir:/Mail/mailhome/%Ln/Maildir:CONTROL=/Mail/mailhome/%Ln/.dovecot:INDEX=/var/cache/dovecot/mailtestindexes/%Ln/.dovecot-index mail_log_prefix = "service=%s user=%u rip=%r " mail_nfs_storage = yes mail_plugins = zlib quota mail_log notify fts fts_squat stats maildir_very_dirty_syncs = yes managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave mbox_write_locks = fcntl namespace default { inbox = yes location = mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox Junk { auto = no special_use = \Junk } mailbox Sent { auto = subscribe special_use = \Sent } mailbox Trash { auto = subscribe special_use = \Trash } prefix = separator = . subscriptions = yes type = private } namespace legacy { alias_for = hidden = yes inbox = no list = no location = mailbox INBOX.Drafts { auto = no special_use = \Drafts } mailbox INBOX.Junk { auto = no special_use = \Junk } mailbox INBOX.Sent { auto = no special_use = \Sent } mailbox INBOX.Trash { auto = no special_use = \Trash } prefix = INBOX. separator = . type = private } passdb { args = /etc/dovecot/passwd.masterusers driver = passwd-file master = yes } passdb { args = cache_key=%u dovecot driver = pam } plugin { fts = squat mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename flag_change append mail_log_fields = uid box msgid size from subject flags mail_log_group_events = yes quota = fs:User quota quota_exceeded_message = Quota exceeded (mailbox for user is full). Please see http://go.geneseo.edu/emailoverquota for help deleting messages while over quota. sieve = /Mail/mailhome/%Ln/.filter.sieve sieve_dir = /Mail/mailhome/%Ln/.sievedir sieve_max_redirects = 25 stats_memory_limit = 32 M stats_refresh = 5 secs stats_track_cmds = yes } postmaster_address = postmaster(a)geneseo.edu protocols = imap sieve lmtp quota_full_tempfail = yes service auth { unix_listener auth-exim { group = exim mode = 0660 } } service imap-login { inet_listener imap_mygeneseo { port = 144 } service_count = 0 vsz_limit = 256 M } service imap { process_limit = 4096 } service lmtp { inet_listener lmtp { port = 24 } } service managesieve-login { inet_listener sieve { port = 4190 } inet_listener sieve_deprecated { port = 2000 } inet_listener sieves { port = 4191 ssl = yes } } service pop3 { process_limit = 4096 } service stats { fifo_listener stats-mail { mode = 0666 } } ssl_ca = </etc/pki/tls/certs/geotrust-intermediate.pem ssl_cert = </etc/pki/tls/certs/wildcard-geotrust.geneseo.edu.pem ssl_key = </etc/pki/tls/private/wildcard-geotrust.geneseo.edu.key userdb { driver = passwd } verbose_proctitle = yes protocol lmtp { mail_plugins = zlib quota mail_log notify fts fts_squat stats sieve } protocol lda { mail_location = maildir:/Mail/mailhome/%Ln/Maildir:CONTROL=/Mail/mailhome/%Ln/.dovecot:INDEX=/var/cache/dovecot/mailtestindexes/%Ln/.dovecot-index mail_plugins = zlib quota mail_log notify fts fts_squat stats sieve plugin { quota = fs:User quota } } protocol imap { imap_logout_format = bytes(in/out)=%i/%o mail_max_userip_connections = 50 mail_plugins = zlib quota mail_log notify fts fts_squat stats quota imap_quota imap_zlib fts imap_stats } protocol sieve { managesieve_logout_format = bytes(in/out)=%i/%o } protocol pop3 { pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_logout_format = bytes(in/out)=%i/%o, top=%t/%p, retr=%r/%b, del=%d/%m, mailbox-size=%s pop3_uidl_format = UID%u-%v } remote 137.238.0.0/16/16 { disable_plaintext_auth = no }

2 2

[Dovecot] dsync migration with preserving pop3 uidl
by Tomáš Herceg 11 Jun '12

11 Jun '12

Hi all, I'm trying to migrate messages from icewarp (merak) mailserver to dovecot via dsync, IMAP migration is looking fine, but I'm unable to migrate pop3 uidls from originating server, probably is something wrong with configuration, but I don't know what. The only documentation i found is on the wiki: http://wiki2.dovecot.org/Migration/Dsync where is bad writen mail_plugins = pop3-migration, i corrected it to mail_plugins = pop3_migration, but it still didn't work, here is my configuration: dovecot --version 2.1.5 dovecot -n # 2.1.5: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-220.13.1.el6.centos.plus.x86_64 x86_64 CentOS release 6.2 (Final) auth_mechanisms = PLAIN LOGIN dict { acl = mysql:/etc/dovecot/dovecot-share-folder.conf expire = db:/var/lib/dovecot/expire/expire.db quotadict = mysql:/etc/dovecot/dovecot-used-quota.conf } disable_plaintext_auth = no imapc_features = rfc822.size imapc_host = **originating_server** last_valid_uid = 500 listen = * log_path = /var/log/dovecot.log mail_fsync = never mail_gid = 500 mail_location = maildir:/%Lh/Maildir/:INDEX=/%Lh/Maildir/ mail_uid = 500 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment ma ilbox date ihave namespace { inbox = yes location = prefix = separator = / type = private } namespace { list = children location = maildir:/%%Lh/Maildir/:INDEX=/%%Lh/Maildir/Shared/%%u prefix = Shared/%%u/ separator = / subscriptions = yes type = shared } namespace { hidden = yes list = yes location = pop3c: prefix = POP3/ } passdb { args = /etc/dovecot/dovecot-mysql.conf driver = sql } plugin { acl = vfile acl_shared_dict = proxy::acl auth_socket_path = /var/run/dovecot/auth-master autocreate = INBOX autocreate2 = Sent autocreate3 = Trash autocreate4 = Drafts autocreate5 = Spam autosubscribe = INBOX autosubscribe2 = Sent autosubscribe3 = Trash autosubscribe4 = Drafts autosubscribe5 = Spam expire = Trash 7 Trash/* 7 Spam 30 expire_dict = proxy::expire pop3_migration_mailbox = POP3/INBOX quota = dict:user::proxy::quotadict quota_rule = *:storage=1G quota_warning = storage=85%% quota-warning 85 %u quota_warning2 = storage=90%% quota-warning 90 %u quota_warning3 = storage=95%% quota-warning 95 %u sieve = /%Lh/sieve/dovecot.sieve sieve_dir = /%Lh/sieve sieve_global_dir = /home/mail/sieve sieve_global_path = /home/mail/sieve/dovecot.sieve zlib_save = bz2 zlib_save_level = 9 } pop3c_host = **originating_server** protocols = pop3 imap sieve service auth { unix_listener /var/spool/postfix/dovecot-auth { group = postfix mode = 0666 user = postfix } unix_listener auth-master { group = vmail mode = 0666 user = vmail } } service dict { unix_listener dict { group = vmail mode = 0660 user = vmail } } service quota-warning { executable = script /usr/local/bin/dovecot-quota-warning.sh unix_listener quota-warning { group = vmail mode = 0660 user = vmail } } ssl_cert = </etc/pki/tls/certs/iRedMail_CA.pem ssl_key = </etc/pki/tls/private/iRedMail.key userdb { args = /etc/dovecot/dovecot-mysql.conf driver = sql } protocol lda { auth_socket_path = /var/run/dovecot/auth-master lda_mailbox_autocreate = yes log_path = /var/log/sieve.log mail_plugins = quota sieve autocreate zlib postmaster_address = root } protocol imap { imap_client_workarounds = tb-extra-mailbox-sep mail_plugins = quota imap_quota autocreate zlib } protocol pop3 { mail_plugins = quota zlib pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } protocol doveadm { mail_plugins = pop3_migration } I'm runnig dsync this way: /usr/bin/time -f "%E" doveadm -vD -o imapc_user=test1(a)irock.cz -o imapc_password=***** backup -u test1(a)irock.cz -f -R imapc:/tmp-ram/imapc-test1 doveadm(root): Debug: Loading modules from directory: /usr/lib64/dovecot/doveadm doveadm(root): Debug: Skipping module doveadm_acl_plugin, because dlopen() failed: /usr/lib64/dovecot/doveadm/lib10_doveadm_acl_plugin.so: undefined symbol: acl_user_module (this is usually intention al, so just ignore this message) doveadm(root): Debug: Skipping module doveadm_expire_plugin, because dlopen() failed: /usr/lib64/dovecot/doveadm/lib10_doveadm_expire_plugin.so: undefined symbol: expire_set_lookup (this is usually i ntentional, so just ignore this message) doveadm(root): Debug: Skipping module doveadm_quota_plugin, because dlopen() failed: /usr/lib64/dovecot/doveadm/lib10_doveadm_quota_plugin.so: undefined symbol: quota_user_module (this is usually int entional, so just ignore this message) doveadm(root): Debug: Skipping module doveadm_zlib_plugin, because dlopen() failed: /usr/lib64/dovecot/doveadm/lib10_doveadm_zlib_plugin.so: undefined symbol: i_stream_create_deflate (this is usually intentional, so just ignore this message) doveadm(root): Debug: Skipping module doveadm_fts_lucene_plugin, because dlopen() failed: /usr/lib64/dovecot/doveadm/lib20_doveadm_fts_lucene_plugin.so: undefined symbol: lucene_index_deinit (this is usually intentional, so just ignore this message) doveadm(root): Debug: Skipping module doveadm_fts_plugin, because dlopen() failed: /usr/lib64/dovecot/doveadm/lib20_doveadm_fts_plugin.so: undefined symbol: fts_list_backend (this is usually intentional, so just ignore this message) doveadm(test1(a)irock.cz): Debug: Added userdb setting: plugin/quota_rule=*:bytes=20971520000 doveadm(test1(a)irock.cz): Debug: Effective uid=500, gid=500, home=/home/mail/i/irock.cz/test1/ doveadm(test1(a)irock.cz): Debug: Namespace : type=private, prefix=, sep=/, inbox=yes, hidden=no, list=yes, subscriptions=yes location=maildir://home/mail/i/irock.cz/test1//Maildir/:INDEX=//home/mail/i/irock.cz/test1//Maildir/ doveadm(test1(a)irock.cz): Debug: maildir++: root=//home/mail/i/irock.cz/test1//Maildir, index=, control=, inbox=//home/mail/i/irock.cz/test1//Maildir, alt= doveadm(test1(a)irock.cz): Debug: Namespace : type=shared, prefix=Shared/%u/, sep=/, inbox=no, hidden=no, list=children, subscriptions=yes location=maildir:/%Lh/Maildir/:INDEX=/%Lh/Maildir/Shared/%u doveadm(test1(a)irock.cz): Debug: shared: root=/var/run/dovecot, index=, control=, inbox=, alt= doveadm(test1(a)irock.cz): Debug: Namespace : type=private, prefix=POP3/, sep=, inbox=no, hidden=yes, list=yes, subscriptions=yes location=pop3c: doveadm(test1(a)irock.cz): Debug: fs: root=, index=, control=, inbox=, alt= dsync(test1(a)irock.cz): Debug: Effective uid=500, gid=500, home=/home/mail/i/irock.cz/test1/ dsync(test1(a)irock.cz): Debug: Namespace : type=private, prefix=, sep=/, inbox=yes, hidden=no, list=yes, subscriptions=yes location=imapc:/tmp-ram/imapc-test1 dsync(test1(a)irock.cz): Debug: imapc: root=/tmp-ram/imapc-test1, index=, control=, inbox=, alt= dsync(test1(a)irock.cz): Debug: maildir++: root=/tmp-ram/imapc-test1, index=, control=, inbox=, alt= dsync(test1(a)irock.cz): Debug: imapc(**originating_server**:143): Looking up IP address dsync(test1(a)irock.cz): Debug: imapc(**originating_server**:143): Connecting to 95.168.205.4:143 dsync(test1(a)irock.cz): Debug: imapc(**originating_server**:143): Server capabilities: IMAP4rev1 AUTH=PLAIN AUTH=LOGIN AUTH=DIGEST-MD5 AUTH=CRAM-MD5 AUTH=NTLM AUTH=GSSAPI SORT THREAD=ORDEREDSUBJECT UIDPLUS QUOTA ACL NAMESPACE CHILDREN IDLE ID UNSELECT METADATA X-ICEWARP-SERVER X-MOVE MSEARCH XLIST CREATE-SPECIAL-USE STARTTLS dsync(test1(a)irock.cz): Debug: imapc(**originating_server**:143): Authenticating as test1(a)irock.cz dsync(test1(a)irock.cz): Debug: imapc(**originating_server**:143): Authenticated successfully dsync(test1(a)irock.cz): Debug: Namespace : type=shared, prefix=Shared/%u/, sep=/, inbox=no, hidden=no, list=children, subscriptions=yes location=maildir:/%Lh/Maildir/:INDEX=/%Lh/Maildir/Shared/%u dsync(test1(a)irock.cz): Debug: shared: root=/var/run/dovecot, index=, control=, inbox=, alt= dsync(test1(a)irock.cz): Debug: Namespace : type=private, prefix=POP3/, sep=, inbox=no, hidden=yes, list=yes, subscriptions=yes location=pop3c: dsync(test1(a)irock.cz): Debug: fs: root=, index=, control=, inbox=, alt= dsync(test1(a)irock.cz): Debug: Namespace : Using permissions from /tmp-ram/imapc-test1: mode=0700 gid=-1 dsync(test1(a)irock.cz): Debug: Namespace : Using permissions from //home/mail/i/irock.cz/test1//Maildir: mode=0700 gid=-1 dsync(test1(a)irock.cz): Error: stat((null)) failed: Bad address dsync(test1(a)irock.cz): Error: stat((null)) failed: Bad address dsync(test1(a)irock.cz): Debug: imapc(**originating_server**:143): Looking up IP address dsync(test1(a)irock.cz): Debug: imapc(**originating_server**:143): Connecting to 95.168.205.4:143 dsync(test1(a)irock.cz): Debug: imapc(**originating_server**:143): Server capabilities: IMAP4rev1 AUTH=PLAIN AUTH=LOGIN AUTH=DIGEST-MD5 AUTH=CRAM-MD5 AUTH=NTLM AUTH=GSSAPI SORT THREAD=ORDEREDSUBJECT UIDPLUS QUOTA ACL NAMESPACE CHILDREN IDLE ID UNSELECT METADATA X-ICEWARP-SERVER X-MOVE MSEARCH XLIST CREATE-SPECIAL-USE STARTTLS dsync(test1(a)irock.cz): Debug: imapc(**originating_server**:143): Authenticating as test1(a)irock.cz dsync(test1(a)irock.cz): Debug: imapc(**originating_server**:143): Authenticated successfully dsync(test1(a)irock.cz): Debug: imapc(**originating_server**:143): Disconnected dsync(test1(a)irock.cz): Debug: imapc(**originating_server**:143): Disconnected 0:00.52 can somebody give me a hint how to use the pop3 migration plugin please? -- Best regards Tomas Herceg Linux System Administrator Red Hat Certified Engineer 111-070-975 tomas.herceg(a)stable.cz Stable.cz, s.r.o. | www.stable.cz www.stable.cz | www.kvapem.cz | www.multak.cz | www.otoman.cz

2 1

Re: [Dovecot] Different but probably related issue
by Johannes Berg 11 Jun '12

11 Jun '12

Hi Marc, [+list since I'm unlikely to be able to solve this problem myself] > I am trying to setup a debian testing (wheeze) mail server using > postfix, dovecot and amavisd-new with spamassassin. I have everything > working fine, using mdbox mailboxes and system users. As a final touch > for this setup, I wanted to be able to train the (global) bayes > database directly through IMAP. > > Hence, I installed your plugin (directly from the official debian > repositories) and set it up to report mails to spamassassin. I am > using the "pipe" backend to call a wrapper script, that stores the > mail into a temporary file and launches sa-learn to learn it. My tests > indicate that this is working properly. Ok, nice. > However, when the dovecot-antispam plugin is enabled, I have a weird > problem sending emails. This is, whenever my MUA tries to save the > just sent message to the "Sent" folder, dovecot shows the following > error: Hmm, ok, let's see > > --------------------------------------------------- > > Dovecot's error log: > > --------------------------------------------------- > > Jun 4 22:35:14 aiur dovecot: imap(user): Error: mdbox /home/user/.mdbox/mailboxes/Sent/dbox-Mails: map uid lost for uid 0 > > Jun 4 22:36:06 aiur dovecot: imap(user): Error: /home/user/.mdbox/mailboxes/Spam/dbox-Mails/dovecot.index reset, view is now inconsistent > > Jun 4 22:36:09 aiur dovecot: imap(user): Error: Log synchronization error at seq=8,offset=27592 for /home/user/.mdbox/storage/dovecot.map.index: Append with UID 56056, but next_uid = 56057 > > Jun 4 22:36:09 aiur dovecot: lda(user): Error: Log synchronization error at seq=8,offset=27592 for /home/user/.mdbox/storage/dovecot.map.index: Append with UID 56056, but next_uid = 56057 > > Jun 4 22:36:10 aiur dovecot: imap(user): Error: /home/user/.mdbox/mailboxes/INBOX/dbox-Mails/dovecot.index reset, view is now inconsistent > > > As a result, the MUA hangs for a while (some minute and a half). After > that it closes the IMAP session properly, but I am left with two > copies of the sent email in the "Sent" folder: one that is marked as > unread and one that is not. Curious. I think the problem is likely the mdbox storage... There have always been some issues with it and the antispam plugin when combined. The first issue was that we couldn't access the raw text or something ... not sure what's up now. > > IMAP Conversation (as logged by roundcube webmail) > > [04-Jun-2012 22:35:14 +0200]: [4A68] C: A0005 APPEND INBOX.Sent (\Seen) {519+} > > [04-Jun-2012 22:35:14 +0200]: [4A68] C: Received: from cpe-76-169-183-245.socal.res.rr.com ([76.169.183.245]) > > by server.domain.tld > > with HTTP (HTTP/1.1 POST); Mon, 04 Jun 2012 22:35:14 +0200 > > MIME-Version: 1.0 ... > > [04-Jun-2012 22:36:10 +0200]: [4A68] S: A0005 OK [APPENDUID > 1338488996 4274] Append completed. That looks ... pretty normal. > At this point, I do not know what else to try or how to fix this > problem. Thus, I have had to disable your plugin for now. Do you have > any ideas on how to proceed? I can give you access to this machine if > need be (it's a personal server). Unfortunately, I don't. I can only suggest, as a test, trying with some other storage format -- I only use Maildir -- to see if the problem is really in the interaction with mdbox. I'm fairly sure that's likely the problem, maybe the plugin doesn't pass something through append that is needed by mdbox, but I've never even attempted to understand mdbox. Maybe Timo can comment. Timo, you can find the latest code here: http://git.sipsolutions.net/?p=dovecot-antispam.git;a=summary johannes

2 1

[Dovecot] Accessing maildir snapshots through dovecot / namespace
by Karl Oulmi 11 Jun '12

11 Jun '12

Hi, I've the following setup : - FreeBSD 9.0 / Dovecot 2.1.7 - Maildir storage over iSCSI (Dell MD3200i) - Virtual users over LDAP to render the storage snapshots available through dovecot (to allow my users to browse their mail history). Here is my conf : namespace { type = private inbox = yes list = yes prefix = INBOX. location = maildir:/home/%u/Maildir:CONTROL=/home/dovecot/control/%u:INDEX=/home/dovecot/indexes/%u } namespace snap { prefix = INBOX.snapshot.h0. hidden = no inbox = no list = yes location = maildir:/da1/%u/Maildir:INDEX=/da1/dovecot/indexes/%u:CONTROL=/da1/dovecot/control/%u type = private } The problem is that I don't see the content of the inbox folder contained in the snapshots whereas subfolders are perfectly viewed ! Inbox cur|new are is /da1/%u/Maildir/ If anyone have a tip, It would be nice... Regards, Karl. -- _______________________________________________________________ Karl OULMI Centre de Ressources Informatiques Institut de Biologie de Lille - CNRS GDS3366 _______________________________________________________________

2 1

[Dovecot] dovecot does not find libpam when compiling with customized prefix
by Roland 11 Jun '12

11 Jun '12

Hello everybody, I try to compile dovecot 2.1.7 with a customized --prefix setting and --with-pam . Although I installed libpam into the same --prefix, dovecot does not find it: checking for pam_start in -lpam... no configure: error: Can't build with PAM support: libpam not found The same or a similar problem seems to have appeared 4 years ago: http://www.dovecot.org/list/dovecot/2008-February/028750.html Which libpam file does dovecot expect in which directory? And possibly there is something wrong with the pam_start function? Thanks in advance, Roland

2 1

[Dovecot] Dovecot over NFS
by James Devine 11 Jun '12

11 Jun '12

I'm playing with running dovecot over NFS and I am running into some issues. I have followed the guide at http://wiki2.dovecot.org/NFS and my setup includes 1 nfs server and 1 client running postfix/dovecot. In testing I am running postal via the command: postal -t 10 -c 10 localhost users399 The test file has a list of 399 users to deliver to. I've provided a sample of the errors I'm receiving and my configuration below, I am running dovecot 2.0.19. Any idea what I might be doing wrong and what I might do to resolve it? My ultimate goal is to setup multiple clients with director so each user is still handled on a single machine, however with a single machine I still seem to be having issues. Here is a sample of some of the errors I'm seeing: Jun 6 15:55:12 test-gluster-client1 dovecot: lmtp(12072, testuser130): Error: mdbox /mnt/testuser130/mdbox/mailboxes/INBOX/dbox-Mails: Invalid dbox header size: 0 Jun 6 15:55:12 test-gluster-client1 dovecot: lmtp(11999, testuser99): Error: Log synchronization error at seq=2,offset=556 for /mnt/testuser99/mdbox/storage/dovecot.map.index: Append with UID 2, but next_uid = 3 Jun 6 15:55:14 test-gluster-client1 dovecot: lmtp(12047, testuser41): Error: mdbox /mnt/testuser41/mdbox/mailboxes/INBOX/dbox-Mails: Invalid dbox header size: 0 Jun 6 15:55:18 test-gluster-client1 dovecot: lmtp(12133, testuser138): Error: Log synchronization error at seq=2,offset=556 for /mnt/testuser138/mdbox/storage/dovecot.map.index: Append with UID 2, but next_uid = 3 Jun 6 15:55:19 test-gluster-client1 dovecot: lmtp(12076, testuser217): Error: mdbox /mnt/testuser217/mdbox/mailboxes/INBOX/dbox-Mails: Invalid dbox header size: 0 Jun 6 15:55:19 test-gluster-client1 dovecot: lmtp(12047, testuser41): Error: mdbox /mnt/testuser41/mdbox/mailboxes/INBOX/dbox-Mails: Invalid dbox header size: 0 Jun 6 15:55:23 test-gluster-client1 dovecot: lmtp(11985, testuser166): Error: mdbox /mnt/testuser166/mdbox/mailboxes/INBOX/dbox-Mails: Invalid dbox header size: 0 Jun 6 15:55:23 test-gluster-client1 dovecot: lmtp(12072, testuser130): Error: Log synchronization error at seq=2,offset=204 for /mnt/testuser130/mdbox/mailboxes/INBOX/dbox-Mails/dovecot.index: uid_validity updated unexpectedly: 1339019655 -> 1339019656 Jun 6 15:55:23 test-gluster-client1 dovecot: lmtp(11928, testuser130): Error: Log synchronization error at seq=2,offset=204 for /mnt/testuser130/mdbox/mailboxes/INBOX/dbox-Mails/dovecot.index: uid_validity updated unexpectedly: 1339019655 -> 1339019656 Jun 6 15:55:24 test-gluster-client1 dovecot: lmtp(11954, testuser192): Error: mdbox /mnt/testuser192/mdbox/mailboxes/INBOX/dbox-Mails: Invalid dbox header size: 0 Jun 6 15:55:24 test-gluster-client1 dovecot: lmtp(12130, testuser128): Error: mdbox /mnt/testuser128/mdbox/mailboxes/INBOX/dbox-Mails: Invalid dbox header size: 0 Jun 6 15:55:27 test-gluster-client1 dovecot: lmtp(12076, testuser217): Error: mdbox /mnt/testuser217/mdbox/mailboxes/INBOX/dbox-Mails: Invalid dbox header size: 0 Jun 6 15:55:27 test-gluster-client1 dovecot: lmtp(12211, testuser60): Error: mdbox /mnt/testuser60/mdbox/mailboxes/INBOX/dbox-Mails: Invalid dbox header size: 0 Jun 6 15:55:27 test-gluster-client1 dovecot: lmtp(12112, testuser190): Error: mdbox /mnt/testuser190/mdbox/mailboxes/INBOX/dbox-Mails: Invalid dbox header size: 0 Jun 6 15:55:27 test-gluster-client1 dovecot: lmtp(12047, testuser41): Error: Log synchronization error at seq=2,offset=204 for /mnt/testuser41/mdbox/mailboxes/INBOX/dbox-Mails/dovecot.index: uid_validity updated unexpectedly: 1339019658 -> 1339019659 Jun 6 15:55:27 test-gluster-client1 dovecot: lmtp(11937, testuser41): Error: Log synchronization error at seq=2,offset=204 for /mnt/testuser41/mdbox/mailboxes/INBOX/dbox-Mails/dovecot.index: uid_validity updated unexpectedly: 1339019658 -> 1339019659 Jun 6 15:55:28 test-gluster-client1 dovecot: lmtp(11985, testuser166): Error: mdbox /mnt/testuser166/mdbox/mailboxes/INBOX/dbox-Mails: Invalid dbox header size: 0 Jun 6 15:55:30 test-gluster-client1 dovecot: lmtp(12130, testuser128): Error: mdbox /mnt/testuser128/mdbox/mailboxes/INBOX/dbox-Mails: Invalid dbox header size: 0 My dovecot config is: auth_debug = yes auth_debug_passwords = yes auth_username_format = %Ln auth_verbose = yes base_dir = /var/run/dovecot-service/ disable_plaintext_auth = no instance_name = dovecot-service mail_debug = yes mail_fsync = always mail_location = mdbox:~/mdbox mail_nfs_index = yes mail_nfs_storage = yes mail_plugins = quota mdbox_rotate_size = 16 M mmap_disable = yes passdb { driver = pam } plugin { quota = dict:User quota::file:%h/mdbox/dovecot-quota } protocols = " imap lmtp pop3" service auth { unix_listener auth-userdb { group = postfix mode = 0666 user = postfix } } service imap-login { inet_listener imap { port = 10143 } } service lmtp { inet_listener lmtp { port = 10024 } } service pop3-login { inet_listener pop3 { port = 10110 } } ssl = no ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = passwd }

3 4

[Dovecot] Frequently login problem
by Jitendra Bhaskar 11 Jun '12

11 Jun '12

Hi, I am using dovecot 2.1.3 on centos 5.7. It was working fine but last few days I need to restart or reload dovecot service because at that time users are not able to login. Each time I am getting information from doveco.log is as : Jun 04 11:52:54 auth: Error: BUG: Authentication client gave a PID 17564 of existing connection Jun 04 11:52:54 auth: Error: BUG: Authentication client gave a PID 17566 of existing connection Jun 04 11:52:59 auth: Error: BUG: Authentication client gave a PID 17564 of existing connection -- * Thanks & Regards * *Jitendra Kumar Bhaskar* Cell:- +91 7306311531 +91 8102997821

2 2

[Dovecot] Dovecot antispam plugin bug: got an empty message
by Petr Bravenec 10 Jun '12

10 Jun '12

It is few months ago I requested help with combination dovecot - dovecot- antispam plugin and dspam. Now I got into troubles with a lot of spam delivering to users inbox. Problem described bellow is now better hidden but stil remains: When moving a message from INBOX to Junk, dspam got an empty message. I made a wrapper about dspamc and there is no input on stdio. The dspam was not trained (got an empty message). Looking to source code of dspam and antispam plugin I suspect the dovecot not to sending any content to plugin when moving from inbox to junk. Petr Bravenec Dne Wednesday 25 of January 2012 17:19:18 Tom Hendrikx napsal(a): > On 25-01-12 08:05, Petr Bravenec wrote: > > Few weeks ago I upgraded dovecot from 1.2 to 2.0.16 and antispam plugin > > to 2.0_pre20101222. Since the upgrade I'm not able to move messages to > > my Junk folder. In the maillog I have found this message: > > > > dspam[25060]: empty message (no data received) > > Gentoo has included the antispam plugin from Johannes historically, but > added the fork by Eugene to support upgrades to dovecot 2.0. It is not > really made clear by the gentoo ebuild is that the forked plugin needs a > slightly different config. > > I use the config below with dovecot 2.0.17 and a git checkout for > dovecot-antispam: > > ===8<======== > plugin { > antispam_signature = X-DSPAM-Signature > antispam_signature_missing = move > antispam_spam_pattern_ignorecase = Junk;Junk.* > antispam_trash_pattern_ignorecase = Trash;Deleted Items;Deleted > Messages > > # Backend specific > antispam_backend = dspam > antispam_dspam_binary = /usr/bin/dspamc > antispam_dspam_args = > --user;%u;--deliver=;--source=error;--signature=%%s > antispam_dspam_spam = --class=spam > antispam_dspam_notspam = --class=innocent > #antispam_dspam_result_header = X-DSPAM-Result > } > > > -- > Regards, > Tom

2 1

[Dovecot] director userdb problem
by Костырев Александр Алексеевич 10 Jun '12

10 Jun '12

hello ! I'm trying to get users from dovecot director server: doveadm director map doveadm(root): Error: User listing returned failure doveadm(root): Error: user listing failed user mail server ip expire time <unknown> 192.168.5.101 2012-06-10 21:54:06 in logs I get: Jun 10 21:41:14 mail-lvsm dovecot: auth-worker(17510): mysql(172.5.14.1): Connected to database EXIM Jun 10 21:41:14 mail-lvsm dovecot: auth-worker(17510): Warning: mysql: Query failed, retrying: Table 'EXIM.users' doesn't exist Jun 10 21:41:14 mail-lvsm dovecot: auth-worker(17510): Error: sql: Iterate query failed: Table 'EXIM.users' doesn't exist (using built-in default iterate_query: SELECT username, domain FROM users) in my dovecot.conf I have: userdb { driver = sql args = /etc/dovecot/dovecot-sql.conf } passdb { driver = static args = proxy=y nopassword=y } and in /etc/dovecot/dovecot-sql.conf: user_query = select MBOX_NAME AS user from M_MAILBOX WHERE (MBOX_NAME = '%u'); Do I have to use special table named users ? is it hard-coded?

1 2

[Dovecot] Restoring older messages to new server?
by Voytek Eymont 10 Jun '12

10 Jun '12

I had Dovcot 1.x setup, all was working well (till...) Server got stuffed up and same Dovecot 1.x was rebuilt, put back in service, all's working well. I have recovered data from Maildirs messages from the old server, As some of the inboxes now have new messages, what is correct way to copy older messages from old server to new server ? (There are no duplicates, simply old messages from past server, data is physically on new server) Thanks for pointers, Voytek -- Swyped on my Motrix with K-9 Mail. Please excuse my brevity.

2 2

[Dovecot] Dovecot setup fails w. multiple mail locations (gnus/dovecot/offlineimap)
by Johnny 10 Jun '12

10 Jun '12

Hi, I am trying to setup a Gnus - Dovecot - Offlineimap - Webmail (Gmail / Fastmail) chain and cannot configure the correct behaviour. Any advice to get this working properly would be very appreciated! I have set up Offlineimap to synchronise two mail accounts into separate folders under ~/Maildir. After running Offlineimap, the folders look as below. Maildir/ |-- Gmail | |-- cur | |-- dovecot.index.log | |-- dovecot-uidlist | |-- dovecot-uidvalidity | |-- dovecot-uidvalidity.4fd3b80e | |-- [Gmail].All\ Mail | |-- [Gmail].Drafts | |-- [Gmail].Important | |-- [Gmail].Sent\ Mail | |-- [Gmail].Spam | |-- [Gmail].Starred | |-- [Gmail].Trash | |-- INBOX | |-- new | |-- Personal | |-- Receipts | |-- tmp | |-- Travel | `-- Work `-- Fastmail |-- cur |-- dovecot.index.log |-- dovecot.mailbox.log |-- dovecot-uidlist |-- dovecot-uidvalidity |-- dovecot-uidvalidity.4fd3b75e |-- INBOX |-- INBOX.Drafts |-- INBOX.Sent\ Items `-- INBOX.Trash The Dovecot config is below. (I have set up a blank "MailTest" directory as inbox, believing that this may preserve the two imap directories better for offlineimap synching (not sure if this is correct)). ,---- | mail_location = maildir:~/Maildir:LAYOUT=fs | | namespace inbox { | location = maildir:~/MailTest | inbox = yes | } | | namespace mygmail { | type = private | separator = . | prefix = "mygmail." | location = maildir:%h/Maildir/Gmail/:LAYOUT=fs | inbox = no | hidden = no | list = yes | subscriptions = yes | } | | namespace myfastmail { | type = private | separator = . | prefix = "myfastmail." | location = maildir:%h/Maildir/FASTMAIL/:LAYOUT=fs | inbox = no | hidden = no | list = yes | subscriptions = yes | } `---- Accessing dovecot through gnus with this setup only sees the files in the directories that are not prefixed (e.g. under Fastmail, INBOX is the only seen folder, all INBOX.subfolder are not there). Removing the prefix manually they can be seen again however (e.g. INBOX.subfolder -> subfolder). If I remove LAYOUT=fs in the dovecot config, nothing is seen at all, although the directories look like proper Maildirs! A second issue is that running Offlineimap a second time seems to work ok for gmail, but Fastmail complains that "cannot create directory '.'"? Thanks! -- Johnny Dovecot 2.1.6 Offlineimap 6.5.2.1 Ma Gnus v0.6

1 0

[Dovecot] director: backend health monitoring
by Костырев Александр Алексеевич 10 Jun '12

10 Jun '12

Hello! I am wonder if there are plans to include backend health monitoring feature to Dovecot Director ? Yes, I'm aware of poolmon by Brad Davidson but I think it's kind of must-have feature out of box. thanks

2 1

[Dovecot] Upgrading 1.2.17 -> 2.1.x
by Adam G Tilghman 10 Jun '12

10 Jun '12

We're planning to upgrade our site from 1.2.17 to 2.1.x within the next few months, but we must ensure our ability to revert to 1.2.17 if problems arise. I don't expect our maildir storage would present a problem, but am less certain about 2.1.x index/control files remaining readable under 1.2.17. Should I have any reason to worry? -- Adam Tilghman Systems Support / Academic Computing & Media Services agt(a)ucsd.edu 858-822-0711 University of California, San Diego

2 1

[Dovecot] Deliver quota-warning via director
by Daniel Parthey 10 Jun '12

10 Jun '12

Hi there, I'm using NFS with Dovecot 2.0.20 and would like to deliver a quota warning to the user using the LMTP director. I have configured quota warnings according to http://wiki2.dovecot.org/Quota/Configuration But it seems that lda delivers the mail directly to the local filesystem and is not using our lmtp director, which prevents NFS mailboxes from getting corrupted. Is there a way to tell lda to use LMTP or the director and ignore the quota while delivering the notification? Regards Daniel

2 1

[Dovecot] Dovecot 1.x on AIX -> Dovecot 2.x on Ubuntu
by root＠yuma.acns.colostate.edu 10 Jun '12

10 Jun '12

We are working on migrating Dovecot 1.2.17 running on AIX 5.3 (believe it or not!) to Dovecot 2.0.13 running on Ubuntu. We have hundreds of users mboxes we will be migrating. My question is regarding the index files. Should we remove those after the migration, but before we open it up to users so Dovecot can create new ones? I did a test migration of a single user, and Dovecot detects the architecture change and put out some panic errors, corrupt files and backtrace messages in syslog on Ubuntu. The messages are shown below. If every user is going to generate these types of errors, I'm thinking maybe it makes sense to remove all the .imap directories and let Dovecot create new clean ones. I realize that may slow things down for awhile while Dovecot is rebuilding new files. Thanks for any info. Jackie Hunt Acad Computing & Networking Srvcs Colorado State University Jun 6 13:43:02 newlamar dovecot: imap-login: Login: user=<cacti>, method=PLAIN, rip=129.82.100.64, lip=129.82.100.124, mpid=19593, TLS Jun 6 13:43:21 newlamar dovecot: imap-login: Login: user=<cacti>, method=PLAIN, rip=129.82.100.64, lip=129.82.100.124, mpid=19597, TLS Jun 6 13:43:21 newlamar dovecot: imap-login: Login: user=<cacti>, method=PLAIN, rip=129.82.100.64, lip=129.82.100.124, mpid=19600, TLS Jun 6 13:44:11 newlamar dovecot: imap(cacti): Disconnected: Logged out bytes=107/441 Jun 6 13:44:11 newlamar dovecot: imap(cacti): Disconnected: Logged out bytes=1676/2724868 Jun 6 13:44:11 newlamar dovecot: imap(cacti): Disconnected: Logged out bytes=129/759 Jun 6 13:51:49 newlamar dovecot: imap-login: Login: user=<cacti>, method=PLAIN, rip=129.82.100.64, lip=129.82.100.124, mpid=19657, TLS Jun 6 13:51:49 newlamar dovecot: imap(cacti): Error: Rebuilding index file /adhome/cacti/.imap/INBOX/dovecot.index: CPU architecture changed Jun 6 13:51:58 newlamar dovecot: imap-login: Login: user=<cacti>, method=PLAIN, rip=129.82.100.64, lip=129.82.100.124, mpid=19662, TLS Jun 6 13:51:58 newlamar dovecot: imap(cacti): Error: Corrupted transaction log file /adhome/cacti/.imap/Trash/dovecot.index.log seq 16777216: log file shrank (1428 < 6144) (sync_offset=6144) Jun 6 13:51:58 newlamar dovecot: imap(cacti): Panic: file buffer.c: line 295 (buffer_set_used_size): assertion failed: (used_size <= buf->alloc) Jun 6 13:51:58 newlamar dovecot: imap(cacti): Error: Raw backtrace: /usr/lib/dovecot/libdovecot.so.0(+0x374fa) [0x7f3ada59c4fa] -> /usr/lib/dovecot/libdovecot.so.0(+0x3753e) [0x7f3ada59c53e] -> /usr/lib/dovecot/libdovecot.so.0(i_fatal+0) [0x7f3ada576837] -> /usr/lib/dovecot/libdovecot.so.0(+0x35319) [0x7f3ada59a319] -> /usr/lib/dovecot/libdovecot-storage.so.0(mail_transaction_log_file_open+0x21e) [0x7f3ada87acee] -> /usr/lib/dovecot/libdovecot-storage.so.0(mail_transaction_log_open+0xb8) [0x7f3ada877a68] -> /usr/lib/dovecot/libdovecot-storage.so.0(mail_index_open+0xe5) [0x7f3ada860e75] -> /usr/lib/dovecot/libdovecot-storage.so.0(index_storage_mailbox_open+0xbc) [0x7f3ada826eac] -> /usr/lib/dovecot/libdovecot-storage.so.0(+0x5f7fb) [0x7f3ada8417fb] -> /usr/lib/dovecot/libdovecot-storage.so.0(+0x28c4c) [0x7f3ada80ac4c] -> /usr/lib/dovecot/libdovecot-storage.so.0(index_storage_mailbox_enable+0x24) [0x7f3ada827584] -> dovecot/imap(imap_status_get+0xfd) [0x7f3adacead8d] -> doveco t/imap(cmd_status+0x182) [0x7f3adace1f92] -> dovecot/imap(+0x1105d) [0x7f3adace405d] -> dovecot/imap(+0x11135) [0x7f3adace4135] -> dovecot/imap(client_handle_input+0x125) [0x7f3adace4385] -> dovecot/imap(client_input+0x65) [0x7f3adace4c35] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_call_io+0x48) [0x7f3ada5a8048] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0xa7) [0x7f3ada5a90c7] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_run+0x28) [0x7f3ada5a7fd8] -> /usr/lib/dovecot/libdovecot.so.0(master_service_run+0x13) [0x7f3ada5962c3] -> dovecot/imap(main+0x2f4) [0x7f3adacdc544] -> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xed) [0x7f3ada1e530d] -> dovecot/imap(+0x95d5) [0x7f3adacdc5d5] Jun 6 13:51:59 newlamar dovecot: imap-login: Login: user=<cacti>, method=PLAIN, rip=129.82.100.64, lip=129.82.100.124, mpid=19664, TLS Jun 6 13:51:59 newlamar dovecot: imap(cacti): Error: Transaction log file /adhome/cacti/.imap/Trash/dovecot.index.log: marked corrupted Jun 6 13:51:59 newlamar dovecot: imap(cacti): Error: Rebuilding index file /adhome/cacti/.imap/Trash/dovecot.index: CPU architecture changed

3 2

[Dovecot] per user quota
by Andreas Meyer 09 Jun '12

09 Jun '12

Hello! I activated quota plugin { quota = maildir:User quota quota_rule = *:storage=1GB # 10% of 1GB = 100MB quota_rule2 = Trash:storage=+10%% } But when I want to do per user quota in the passwd-file ...vhosts/anup.de/anmeyer::userdb_mail=maildir:~/userdb_quota_rule=*:bytes=10G I get this in the logfile and can't login: Jun 08 22:25:52 imap(anmeyer(a)anup.de): Error: user anmeyer(a)anup.de: Initialization failed: Initializing mail storage from mail_location setting failed: Unknown setting: bytes Jun 08 22:25:52 imap(anmeyer(a)anup.de): Error: Invalid user settings. Refer to server log for more information. Same with 'storage' in the passwd-file. What's wrong? Andreas

2 2

[Dovecot] director and doveadm server
by Angel L. Mateo 09 Jun '12

09 Jun '12

Hi, I've been reading doc at http://wiki2.dovecot.org/Director to configure my servers. My question is regarding configuration of doveadm server. I have configured both, director and backend servers, as described in that doc, but I don't know how to run doveadm commands in director servers. doveadm is working, because I can run commands, but they are executed in local (director) server. For example: root@myotis40:/etc/dovecot/conf.d# doveadm director status mail server ip vhosts users 155.54.211.169 100 1 but doveadm who seems to be executed just in local: (backend server) root@myotis30:/etc/dovecot/conf.d# doveadm who username # proto (pids) (ips) angel.luis 2 imap (11931 11936) (155.54.67.5) (director server) root@myotis40:/etc/dovecot/conf.d# doveadm who username # proto (pids) (ips) And another question about this... what is the local config option? I haven't found it documented anywhere. -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información _o) y las Comunicaciones Aplicadas (ATICA) / \\ http://www.um.es/atica _(___V Tfo: 868887590 Fax: 868888337

2 1

[Dovecot] director and IPs shown at the backends
by Angel L. Mateo 09 Jun '12

09 Jun '12

Hello, I am configuring a dovecot imap/pop servers with a dovecot director in front of them. Because I am using director proxy, connections in the backends are show as coming from director IPs. Is there any way to configure director (or backends) so the backends know (and report) the original IP instead of the director IP?

3 3

[Dovecot] Corrupted mdbox on LMTP director delivery while user is logged in via IMAP
by Daniel Parthey 09 Jun '12

09 Jun '12

Hi, we get errors about corrupted indexes and we are losing flags with mdbox on NFSv4: Error: Recent flags state corrupted for mailbox Error: Corrupted dbox file Error: Corrupted transaction log file It looks like a LMTP director problem. The user has IMAP IDLE connections open and lmtp delivers to another host. This leads to nfs corruption problems. The user is logged into mail04 and has some IMAP IDLE mailbox connections open: mail04:~# ps -ef|grep someuser vmail 5217 23918 0 Jun07 ? 00:00:00 dovecot/imap [someuser(a)example.de 10.129.3.190 IDLE] vmail 8623 23918 0 Jun07 ? 00:00:00 dovecot/imap [someuser(a)example.de 10.129.3.233 IDLE] vmail 20279 23918 0 00:37 ? 00:00:00 dovecot/imap [someuser(a)example.de 10.129.3.213 IDLE] If postfix on mail01/dcmailbox01 receives an incoming mail now, the director on mail01 does NOT direct LMTP to the responsible host mail04/dcmailbox04 (10.129.3.190), but delivers it locally to mail01 (10.129.3.193), which leads to file corruption. mail01:~# doveadm -c /etc/dovecot-director/dovecot-director.conf director status someuser(a)example.de Current: not assigned Hashed: 10.129.3.193 Initial config: 10.129.3.193 mail01:~# host 10.129.3.193 193.3.129.10.in-addr.arpa domain name pointer dcmailbox01.example.net. mail01 runs the lmtp proxy and lmtp delivery, even though the user is logged in via IMAP IDLE on mail04: mail01:~# grep "^Jun 8 03:36:.*someuser@example.de" /var/log/server/dovecot.log Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27124): Debug: auth input: someuser(a)example.de home=/mail/dovecot/example.de/someuser uid=501 gid=123 quota_rule=*:bytes=5000M:messages=0 Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27124, someuser(a)example.de) Debug: Effective uid=501, gid=123, home=/mail/dovecot/example.de/someuser Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27124, someuser(a)example.de) Debug: Quota root: name=User quota backend=dict args=:proxy::quota Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27124, someuser(a)example.de) Debug: Quota rule: root=User quota mailbox=* bytes=5242880000 messages=0 Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27124, someuser(a)example.de) Debug: Quota rule: root=User quota mailbox=Trash bytes=+104857600 messages=0 Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27124, someuser(a)example.de) Debug: Quota warning: bytes=4980736000 (95%) messages=0 reverse=no command=quota-warning 95 someuser(a)example.de Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27124, someuser(a)example.de) Debug: Quota warning: bytes=4194304000 (80%) messages=0 reverse=no command=quota-warning 80 someuser(a)example.de Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27124, someuser(a)example.de) Debug: dict quota: user=someuser(a)example.de, uri=proxy::quota, noenforcing=0 Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27124, someuser(a)example.de) Debug: fs: root=/mail/dovecot/example.de/someuser/mail, index=, control=, inbox=, alt= Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27124, someuser(a)example.de) Debug: Namespace : Using permissions from /mail/dovecot/example.de/someuser/mail: mode=0700 gid=-1 Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27124, someuser(a)example.de) Debug: sieve: include: sieve_global_dir is not set; it is currently not possible to include `:global' scripts. Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27124, someuser(a)example.de) Debug: jOv8JgJX0U/0aQAA3l+BKA: sieve: using sieve path for user's script: /mail/dovecot/example.de/someuser/.dovecot.sieve Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27124, someuser(a)example.de) Debug: jOv8JgJX0U/0aQAA3l+BKA: sieve: opening script /mail/dovecot/example.de/someuser/.dovecot.sieve Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27124, someuser(a)example.de) Debug: jOv8JgJX0U/0aQAA3l+BKA: sieve: script binary /mail/dovecot/example.de/someuser/.dovecot.svbin successfully loaded Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27124, someuser(a)example.de) Debug: jOv8JgJX0U/0aQAA3l+BKA: sieve: binary save: not saving binary /mail/dovecot/example.de/someuser/.dovecot.svbin, because it is already stored Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27124, someuser(a)example.de) Debug: jOv8JgJX0U/0aQAA3l+BKA: sieve: executing script from /mail/dovecot/example.de/someuser/.dovecot.svbin Jun 8 03:36:02 10.129.3.213 dovecot: lmtp(23404): Debug: auth input: user=someuser(a)example.de proxy port=19024 host=10.129.3.193 proxy_refresh=450 Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27124, someuser(a)example.de) jOv8JgJX0U/0aQAA3l+BKA: sieve: mailbox: deliver: msgid=<201206080136.q581a1Rc024891(a)iolite.ham.srv.mcs.de> from=service(a)cityline.net: stored mail into mailbox 'INBOX' Jun 8 03:36:02 10.129.3.213 dovecot: lmtp(23406): Debug: auth input: user=someuser(a)example.de proxy port=19024 host=10.129.3.193 proxy_refresh=450 Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27125): Debug: auth input: someuser(a)example.de home=/mail/dovecot/example.de/someuser uid=501 gid=123 quota_rule=*:bytes=5000M:messages=0 Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27125, someuser(a)example.de) Debug: Effective uid=501, gid=123, home=/mail/dovecot/example.de/someuser Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27125, someuser(a)example.de) Debug: Quota root: name=User quota backend=dict args=:proxy::quota Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27125, someuser(a)example.de) Debug: Quota rule: root=User quota mailbox=* bytes=5242880000 messages=0 Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27125, someuser(a)example.de) Debug: Quota rule: root=User quota mailbox=Trash bytes=+104857600 messages=0 Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27125, someuser(a)example.de) Debug: Quota warning: bytes=4980736000 (95%) messages=0 reverse=no command=quota-warning 95 someuser(a)example.de Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27125, someuser(a)example.de) Debug: Quota warning: bytes=4194304000 (80%) messages=0 reverse=no command=quota-warning 80 someuser(a)example.de Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27125, someuser(a)example.de) Debug: dict quota: user=someuser(a)example.de, uri=proxy::quota, noenforcing=0 Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27125, someuser(a)example.de) Debug: fs: root=/mail/dovecot/example.de/someuser/mail, index=, control=, inbox=, alt= Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27125, someuser(a)example.de) Debug: Namespace : Using permissions from /mail/dovecot/example.de/someuser/mail: mode=0700 gid=-1 Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27125, someuser(a)example.de) Debug: sieve: include: sieve_global_dir is not set; it is currently not possible to include `:global' scripts. Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27125, someuser(a)example.de) Debug: gWijMAJX0U/1aQAA3l+BKA: sieve: using sieve path for user's script: /mail/dovecot/example.de/someuser/.dovecot.sieve Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27125, someuser(a)example.de) Debug: gWijMAJX0U/1aQAA3l+BKA: sieve: opening script /mail/dovecot/example.de/someuser/.dovecot.sieve Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27125, someuser(a)example.de) Debug: gWijMAJX0U/1aQAA3l+BKA: sieve: script binary /mail/dovecot/example.de/someuser/.dovecot.svbin successfully loaded Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27125, someuser(a)example.de) Debug: gWijMAJX0U/1aQAA3l+BKA: sieve: binary save: not saving binary /mail/dovecot/example.de/someuser/.dovecot.svbin, because it is already stored Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27125, someuser(a)example.de) Debug: gWijMAJX0U/1aQAA3l+BKA: sieve: executing script from /mail/dovecot/example.de/someuser/.dovecot.svbin Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27125, someuser(a)example.de) gWijMAJX0U/1aQAA3l+BKA: sieve: mailbox: deliver: msgid=<201206080136.q581a1t0024890(a)iolite.ham.srv.mcs.de> from=service(a)cityline.net: stored mail into mailbox 'INBOX' The "user logged on via IMAP on mail04" and "lmtp delivery on mail01" seems to lead to corruption of mdbox indexes: Jun 8 03:36:03 10.129.3.200 dovecot: mailbox: mail: imap(someuser(a)example.de): Error: Corrupted transaction log file /mail/dovecot/example.de/someuser/mail/mailboxes/INBOX/dbox- Mails/dovecot.index.log seq 82: Invalid transaction log size (32856 vs 32824): /mail/dovecot/example.de/someuser/mail/mailboxes/INBOX/dbox-Mails/dovecot.index.log (sync_offset=32856) Jun 8 03:36:03 10.129.3.200 dovecot: mailbox: mail: imap(someuser(a)example.de): Error: Index /mail/dovecot/example.de/someuser/mail/mailboxes/INBOX/dbox-Mails/dovecot.index: Lost log for seq=82 offset=32856 Jun 8 03:36:03 10.129.3.200 dovecot: mailbox: mail: imap(someuser(a)example.de): Warning: fscking index file /mail/dovecot/example.de/someuser/mail/mailboxes/INBOX/dbox-Mails/dovecot.index Jun 8 03:36:03 10.129.3.200 dovecot: mailbox: mail: imap(someuser(a)example.de): Error: Fixed index file /mail/dovecot/example.de/someuser/mail/mailboxes/INBOX/dbox-Mails/dovecot.index: log_file_seq 82 -> 83 Jun 8 03:36:38 10.129.3.200 dovecot: mailbox: mail: imap(someuser(a)example.de): Error: Transaction log file /mail/dovecot/example.de/someuser/mail/mailboxes/INBOX/dbox-Mails/dovecot.index.log.2: marked corrupted How to enable the LMTP director to deliver to the correct mailbox host? Configuration of mailbox and director of mail01 is attached. Regards, Daniel

1 1

[Dovecot] ntlm_auth in Dovecot
by Leonardo 09 Jun '12

09 Jun '12

Hi, I'm trying getting NTLM auth working against AD in my Dovecot 2.0.15. I'm getting the following error: Jun 08 14:18:11 auth: Info: winbind(?,10.44.3.151): user not authenticated: NT_STATUS_UNSUCCESSFUL "wbinfo -u" reports all the users of the domain and "ntlm_auth --username=%name% --domain="%domain%" gets authenticated successfully. Debugging winbind I can see the following error: [2012/06/08 14:18:11.129611, 10] winbindd/winbindd.c:651(process_request) process_request: unknown request fn number 14 [2012/06/08 14:18:11.129671, 10] winbindd/winbindd.c:738(winbind_client_response_written) winbind_client_response_written[2822:unknown request]: delivered response to client My dovecot.conf is the following: auth_mechanisms = plain ntlm login auth_username_format = %n auth_verbose = yes auth_winbind_helper_path = /usr/bin/ntlm_auth auth_use_winbind = yes auth_debug = yes disable_plaintext_auth = no info_log_path = /var/log/dovecot-info.log log_path = /var/log/dovecot.log mail_location = maildir:/var/mail/domains/%d/%n plugin { autocreate = Trash autocreate2 = Spam autocreate3 = Sent autosubscribe = Trash autosubscribe2 = Spam autosubscribe3 = Sent } protocols = imap ssl = no userdb { driver = static args = uid=100 gid=101 home=/var/mail/domains/%d/%n first_valid_uid=100 } passdb ldap { driver = ldap args = /etc/dovecot/dovecot-ldap.conf } protocol imap { mail_plugins = autocreate } Sounds like there is an issue when Dovecot runs "ntlm_auth". It doesn't appear to be a permission issue (perms are 755). Any help is appreciated. Thank you in advance. -- leonardo.

1 2

[Dovecot] [ Re: best practises for mail systems]
by Michescu Andrei 09 Jun '12

09 Jun '12

Hello, If disk space and bandwidth are affordable (and from your setup it seems that they are affordable as you have everything locally) I would split the mail storage completely and use replication in between n-master servers (n=2 for your case). The replication is not yet fully tested, but Timo is actively working on this feature. The fear of lossing the imap session does not make sense (at least to me) as the client will reconnect automatically in the background. Like this you have no SPOF and no split-brain and you get the flexibility (if needed) to geographically distribute your servers in the the future. Keep each server with its own ip, connect to them via DNS (round robin etc etc). We are currently experimenting with a setup similar to this one, but with geographically distributed servers (trans-continental) (bandwidth limited and high cost). Best regards, Andrei > We once try to use similar solution as your first. > > 3 servers for LVS -HA > > This master server redirect users for 2 or 3 dovecot backends.. > > The mail storage were maildir ontop of OCFS2 > > Our problem were that OCFS2 were too slow. We could not handle many users. > > So we took an step back and now use only user one server. > > But still thinking in go back to the first one. with LVS > > When using LVS try to sticky user to the same backend, LVs can do ths by > source ip. > > Where i work we have problens on testign storage. If you have any advices > for testing disk performance, i will be thankfull. > > I wil be glad to answer anything else. > > []'sf.rique > > > On Tue, Jun 5, 2012 at 9:59 AM, ëÏÓÔÙÒÅ× áÌÅËÓÁÎÄÒ áÌÅËÓÅÅ×ÉÞ < > a.kostyrev(a)serverc.ru> wrote: > >> I think LVS is just fine and it is not a SPOF 'cause it is actually 2 >> servers: >> active master --> and standby slave. >> LVS supports real time replication of connections from master to slave, >> so if master dies slave knows which IP was connected to which dovecot >> server. >> >> I'm more worried about right design of mailstorage.. should I use some >> cluster fs with all mail of all users >> or should I split mailstorage across servers and somehow avoid long >> downtime if one of servers goes down. >> >> >> -----Original Message----- >> From: dovecot-bounces(a)dovecot.org [mailto:dovecot-bounces@dovecot.org] >> On >> Behalf Of Matthias-Christian Ott >> Sent: Tuesday, June 05, 2012 11:28 PM >> To: dovecot(a)dovecot.org >> Subject: Re: [Dovecot] best practises for mail systems >> >> On 2012-06-05 05:14, ëÏÓÔÙÒÅ× áÌÅËÓÁÎÄÒ áÌÅËÓÅÅ×ÉÞ wrote: >> > On each host system we created one VM and passed through 3x2TB disks >> into it. >> > >> > >> > >> > In guests vms on top of this disks we made XFS and fired up glusterfs >> with distributed replicated volumes for our mailstorage. >> > >> > so it looks like this: >> > >> > >> > >> > vm1 replicate vm2 >> > >> > disk1 ------------> disk4 >> > >> > disk2 ------------> disk5 >> > >> > disk3 ------------> disk6 >> > >> > >> > >> > in each vm we mounted glusterfs and pointed dovecot to that dir for >> mail >> creation (as ltmp) and imap4 user access. >> > >> > also we use exim as smtp. >> > >> > >> > >> > So, with glusterfs as mailstorage we can go for LVS to load balancing >> for exim and dovecot. >> > >> > so wherenever one of host systems (hence one of mail vms) goes down, >> users don't notice that >> > >> > 'cause LVS points them to working smtp and imap4 servers >> > >> > and they get their mail 'cause of glusterfs. >> > [...] >> > Cons: >> > >> > - not quite sure if glusterfs is production ready solution 'cause I've >> experienced split-brains during setting it up >> > >> > - IO performance issue. Though we didn't yet run any io tests, but >> glusterfs uses fuse to mount on clients. And guys on #gluster told me >> writing to the glusterfs mount will not be strictly local io. >> >> I'm not familiar with LVS, but from the project description it seems >> that you need a "front server" that does the load balancing, so you >> either have to run at least two of these servers in parallel or add to >> your cons that you introduced a single point of failure. But you >> mentioned that you only have two servers, so you really can do this. >> >> I would rather ensure high availability by running the two servers as >> masters and using either IP address takeover or DNS failover (with >> dynamic DNS) and either use Dovecot's replication (I haven't tested it >> yet and I'm not sure what happens in case of IP address takeover) or a >> file system that can handle these kinds of errors (e.g. Coda). You could >> do load balancing via round-robin DNS. This only protects you against >> the failure of single machine and because IMAP sessions are not >> replicated between the servers, connections will get reset if one server >> fails, but it's cost-effective and uses software that already exists. >> >> Regards, >> Matthias-Christian >> > > > !DSPAM:4fce037e104291424646138! >

4 9

[Dovecot] 2.0.X -> 2.1 pitfalls?
by Frank Elsner 09 Jun '12

09 Jun '12

Hi all, are there any pitfalls known for the migration from 2.0.18 to 2.1? Can I simply stop dovecot, make install and start again? --Frank Elsner

10 22

[Dovecot] Maildir filename has wrong S value
by Wouter de Geus 09 Jun '12

09 Jun '12

Hello folks, This morning I tried to open an old archive mail folder using Mutt. However, while fetching headers it aborted. Checking the dovecot log gave me this: @400000004fb21996267d37d4 imap(benv): Error: Cached message size smaller than expected (9115 < 9420) @400000004fb21996267e8bac imap(benv): Error: Maildir filename has wrong S value, renamed the file from /home/vpopmail/domains/benv.junerules.com/benv/Maildir/.Old.2009/cur/1260395566.28175.black,S=9115:2,S to /home/vpopmail/domains/benv.junerules.com/benv/Maildir/.Old.2009/cur/1260395566.28175.black,S=9420:2,S @400000004fb21996267e937c imap(benv): Error: Corrupted index cache file /home/vpopmail/domains/benv.junerules.com/benv/Maildir/.Old.2009/dovecot.index.cache: Broken physical size for mail UID 294 @400000004fb21996267eaaec imap(benv): Error: read(/home/vpopmail/domains/benv.junerules.com/benv/Maildir/.Old.2009/cur/1… failed: Input/output error (uid=294) @400000004fb219962680683c imap(benv): Info: Disconnected: Internal error occurred. Refer to server log for more information. [2012-05-15 10:53:32] in=6503 out=192718 I've retried opening this folder several times, but each time Dovecot only fixes 1 file and then aborts. (the folder apparently has a lot more files with incorrect sizes). My question here is: Why does dovecot abort? Isn't the issue fixed after the rename? Also: The files are not corrupted or unreadable, reading them through the commandline works fine. I've looked through my backups and saw that at least half a year ago this mismatch in size was already present. I've been running dovecot for quite a while, so the cause of this size mismatch might very well be a issue in an older version of dovecot / my configuration. Right now I'm running dovecot 2.1.6, but I've been running the v1.2 version for quite a while before that. Is this something that can be improved in dovecot so it doesn't abort after 1 rename? (of course I could script a rename operation, but that seems like a workaround to me) Thanks for reading. Wouter. My current configuration: ========================= # 2.1.6: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32.32-g3d14ce7 x86_64 Slackware 11.0.0 base_dir = /var/run/dovecot2/ disable_plaintext_auth = no first_valid_uid = 89 info_log_path = /dev/stderr last_valid_uid = 89 log_path = /dev/stderr log_timestamp = mail_debug = yes mail_location = maildir:~/Maildir mail_max_userip_connections = 50 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify e nvironment mailbox date namespace { inbox = yes location = prefix = INBOX. separator = . type = private } passdb { driver = vpopmail } plugin { autocreate = INBOX.Spam quota = maildir sieve = ~/.sieve/dovecot.sieve sieve_dir = ~/.sieve sieve_global_dir = /etc/dovecot/sieve/ sieve_subaddress_sep = -+ } protocols = imap pop3 sieve service auth { unix_listener auth-master { group = vchkpw mode = 0660 } unix_listener auth-userdb { group = vchkpw mode = 0660 } } service imap-login { inet_listener imap { address = [::] * port = 143 } inet_listener imaps { address = [::] * port = 993 } process_limit = 256 process_min_avail = 3 service_count = 1 user = dovecot } service managesieve-login { process_limit = 256 process_min_avail = 3 service_count = 1 user = dovecot } service pop3-login { inet_listener pop3 { address = [::] * port = 110 } inet_listener pop3s { address = [::] * port = 995 } process_limit = 256 process_min_avail = 3 service_count = 1 user = dovecot } ssl_cert = </var/qmail/control/servercert.pem ssl_cipher_list = ALL:!LOW ssl_key = </var/qmail/control/servercert.pem userdb { driver = vpopmail } verbose_proctitle = yes protocol lda { hostname = mail.benv.junerules.com info_log_path = /var/log/dovecot/dovecot2-deliver.log log_path = /var/log/dovecot/dovecot2-deliver-errors.log mail_plugins = sieve postmaster_address = postmaster(a)benv.junerules.com sendmail_path = /var/qmail/bin/sendmail } protocol imap { imap_max_line_length = 64 k mail_plugins = quota imap_quota autocreate } protocol pop3 { mail_plugins = quota autocreate pop3_no_flag_updates = no pop3_uidl_format = %v-%u } =================================

5 5

[Dovecot] 2.1.7 altmove not working
by Alex Crow 09 Jun '12

09 Jun '12

Hi list, I've just set up a 2.1.7 server, and have migrated a couple of accounts across from a 2.0.15 server, keeping the old configs. I have a strange problem on the new box in that altmove just doesn't work. I have my main storage under /home/email, indexes under /home/indexes and ALT under /home/email_archive. When I run the altmove command, the following broken symlink is created in /home/email/integrafin.co.uk/acrow: lrwxrwxrwx. 1 email email 54 Jun 8 10:46 dbox-alt-root -> /home/email_archive/integrafin.co.uk/a/acrow/mailboxes But nothing is created in the archive other than the empty directory: /home/email_archive/integrafin.co.uk/a/acrow. My mail_location is: mail_location = mdbox:/home/email/%d/%n:INDEX=/home/indexes/%d/%1n/%n:ALT=/home/email_archive/%d/%1n/%n This worked perfectly on the older server. I have attached my doveconf -a output. Any help much appreciated. Regards Alex

1 2

Re: [Dovecot] auth trouble
by Joseph Tam 08 Jun '12

08 Jun '12

Glenn English writes: > I'm getting a lot of what I think is a local socket asking > dovecot:auth to verify username/passwords: > >> May 31 09:00:54 server dovecot-auth: pam_unix(dovecot:auth): authentication failure; logname= uid=0 euid=0 tty=dovecot ruser=admin rhost= If dovecot-auth is getting input from a local socket, then rhost information is irrelevant since the host doing the asking is the server itself (maybe from another daemon connected to a remote host). Maybe someone is brute forcing your server's Postfix authenticated SMTP service since Postfix can be configured to use Dovecot's SASL authentication framework. Joseph Tam <jtam.home(a)gmail.com>

4 5

[Dovecot] upgrade from 1.0.5 to 2.1.7
by Andreas Meyer 08 Jun '12

08 Jun '12

Hello! I want to upgrade the docevot-installation from v 1.0.5 to 2.1..7 Now I get the following executing doveconf -n -c /etc/dovecot/dovecot.conf > /home/mail1/dovecot-2.conf doveconf: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:217: add auth_ prefix to all settings inside auth {} and remove the auth {} section completely doveconf: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:219: passdb passwd-file {} has been replaced by passdb { driver=passwd-file } doveconf: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:222: userdb passwd-file {} has been replaced by userdb { driver=passwd-file } The section at line 217 looks like this: auth default { mechanisms = plain passdb passwd-file { args = /etc/dovecot/passwd } userdb passwd-file { args = /etc/dovecot/passwd } How do I change it to fullfill the new needs? And how do I handle line 217? add auth_ prefix to all settings inside auth {} and remove the auth {} section completely ? Thanks for help! Andreas

3 14

[Dovecot] Fwd: ntlm_auth in Dovecot
by Алексей Переклад 08 Jun '12

08 Jun '12

Try to delete your server from domain and add it again by "net ads join..." > I'm trying getting NTLM auth working against AD in my Dovecot 2.0.15. > > I'm getting the following error: > > > Jun 08 14:18:11 auth: Info: winbind(?,10.44.3.151): user not > authenticated: NT_STATUS_UNSUCCESSFUL

1 0

[Dovecot] Director pop3 real ips v2.1.1
by Костырев Александр Алексеевич 08 Jun '12

08 Jun '12

good day! I'm experiencing problem with pop3 proxying: on backend servers in logs there's director's ip instead of remote's like this: Jun 8 15:21:23 host-01 dovecot: pop3-login: Login: user=<test1(a)example.com>, method=PLAIN, rip=192.168.5.102, lip=192.168.5.100, mpid=26170, secured Jun 8 15:32:16 host-01 dovecot: pop3-login: Login: user=<test1(a)example.com>, method=PLAIN, rip=192.168.5.102, lip=192.168.5.100, mpid=26426, secured -- С уважением, Костырев Александр системный администратор ЗАО "Сервер-Центр" тел.: (423) 262-02-62 (доб. 2037) факс: (423) 262-02-10 a.kostyrev(a)serverc.ru icq: 404-198-497

3 3

[Dovecot] dovecot ignores entries in virtual_alias_maps when using dovecot lda
by Marko Weber 08 Jun '12

08 Jun '12

hello list, i need help. dovecot dont look into my virtual_alias_maps . i set via postzfixadmin an alias postmaster(a)domain.tld to newmail(a)domainother.tld. when i send mails to postmaster(a)domain.tld mails are rejected. dovecot authworker tells me in log: user unknown. but i can request the data via postmap -v -q postmaster(a)domain.tld mysql:/etc/postfix/mysql_virtual_alias.cf and get result "newmail(a)domainother.tld". any ideas, hwo to get dovecot to look into my alias maps? marko

2 2

[Dovecot] Can we know when a user read our email?
by Beto Moreno 08 Jun '12

08 Jun '12

Hi. I have seen some emails servers that if I send a email to other person I can see if that person have read our emails and with a option to delete the email if the person hasn't read our email. Does dovecot have some like this feature? Thanks!!!

13 32

[Dovecot] Problems since upgrading to 2.1.6 from 2.0.20
by Trever L. Adams 08 Jun '12

08 Jun '12

Hello Everyone, I saw the text about the change and needing to define an inbox namespace. Everything seems to work fine except doveadm. I get the following from a cronjob that has worked well for years now. doveadm(account(a)example.com): Error: Syncing mailbox TRASH failed: Mailbox doesn't exist: TRASH doveadm(account(a)example.com): Error: Syncing mailbox TRASH failed: Mailbox doesn't exist: TRASH doveadm(account(a)example.com): Error: Syncing mailbox TRASH failed: Mailbox doesn't exist: TRASH The cronjob is: 1 4 * * * doveadm expunge -A mailbox TRASH SAVEDBEFORE 30D What is the problem? I have tried to find documentation and do searches for others having the same problem. I do not know if I am just missing something or what. Any help would be greatly appreciated. Thank you, Trever

1 1

[Dovecot] Postfix don't relay to dovecot virtual user
by phil25lsbin 07 Jun '12

07 Jun '12

Hi, I run a mail server on debian squeeze system , i installed the following software postfix dovecot spamassassin postgrey I configured a virtual domain and virtual mailbox but postfix don't pipe mail in dovecot. In log, it's appear that the relay mode is local and the delivery message is delivered to mailbox) Jun 7 15:23:01 ns230370 postfix/smtpd[27501]: 66BBA4D40F0: client=localhost.localdomain[127.0.0.1] Jun 7 15:23:01 ns230370 postfix/cleanup[8017]: 66BBA4D40F0: message-id=< E1Sccg1-00029S-9I(a)ns231581.ovh.net> Jun 7 15:23:01 ns230370 postfix/qmgr[27490]: 66BBA4D40F0: from=< admlb(a)lebest.fr>, size=1807, nrcpt=1 (queue active) Jun 7 15:23:01 ns230370 postfix/local[7907]: 66BBA4D40F0: to=< admlb(a)lebest.fr>, relay=local, delay=0, delays=0/0/0/0, dsn=2.0.0, status=sent (delivered to mailbox) Jun 7 15:23:01 ns230370 postfix/qmgr[27490]: 66BBA4D40F0: removed My dovecot.conf: protocols = imap imaps pop3 pop3s log_timestamp = "%Y-%m-%d %H:%M:%S " log_path = /var/log/dovecot/dovecot.log info_log_path = /var/log/dovecot/dovecot-info.log mail_privileged_group = mail disable_plaintext_auth = no mail_location = maildir:/home/smtp/%d/%n:INDEX=/home/smtp/%d/%n/indexes protocol imap { } protocol pop3 { } protocol managesieve { } protocol lda { postmaster_address = admlb(a)XXX.FR mail_plugin_dir = /usr/lib/dovecot/modules/lda auth_socket_path = /var/run/dovecot/auth-master } auth default { userdb sql { args = /etc/dovecot/dovecot-mysql.conf } passdb sql { args = /etc/dovecot/dovecot-mysql.conf } socket listen { master { path = /var/run/dovecot/auth-master mode = 0600 user = smtp } client { path = /var/spool/postfix/private/auth mode = 0660 user = postfix group = postfix } } } dict { } plugin { } My main.cf myhostname = smtp.XXX.FR alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = XXX.FR mydestination = XXX.FR, smtp.XXX.FR, localhost.XXX.FRr, localhost relayhost = mynetworks = 172.16.0.0/12 127.0.0.0/8 mailbox_size_limit = 0 inet_interfaces = all virtual_uid_maps = static:3000 virtual_gid_maps = static:3000 virtual_mailbox_base = /home/smtp virtual_transport = dovecot virtual_mailbox_domains = mysql:/etc/postfix/ mysql_virtual_mailbox_domains.cf virtual_mailbox_maps = mysql:/etc/postfix/mysql_virtual_mailbox_maps.cf virtual_alias_maps = mysql:/etc/postfix/mysql_virtual_alias_maps.cf relay_domains = mysql:/etc/postfix/mysql_relay_domains.cf smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_non_fqdn_hostname, reject_non_fqdn_sender, reject_non_fqdn_recipient, reject_unauth_destination, reject_unauth_pipelining, check_policy_service inet:127.0.0.1:10023, reject_invalid_hostname smtpd_sasl_auth_enable = yes smtpd_sasl_security_options = noanonymous content_filter = amavis:[127.0.0.1]:10024 receive_override_options = no_address_mappings inet_protocols = ipv4 The end of master.cf file dovecot unix - n n - - pipe flags=DRhu user=smtp:smtp argv=/usr/lib/dovecot/deliver -f ${sender} -d ${user}@${nexthop} amavis unix - - - - 2 smtp -o smtp_data_done_timeout=1200 -o smtp_send_xforward_command=yes 127.0.0.1:10025 inet n - - - - smtpd -o content_filter= -o local_recipient_maps= -o relay_recipient_maps= -o smtpd_restriction_classes= -o smtpd_client_restrictions= -o smtpd_helo_restrictions= -o smtpd_sender_restrictions= -o smtpd_recipient_restrictions=permit_mynetworks,reject -o mynetworks=127.0.0.0/8 -o strict_rfc821_envelopes=yes -o receive_override_options=no_unknown_recipient_checks,no_header_body_checks -o smtpd_bind_address=127.0.0.1 Thanks

3 3

[Dovecot] auth-worker problem here.
by Marko Weber 07 Jun '12

07 Jun '12

hello, in howto for gentoo i found this: To tell Postfix about the maps that you've just set up, add the following (substituting mysql for pgsql if you're on PostgreSQL) to the bottom of /etc/postfix/main.cf: virtual_alias_maps = mysql:/etc/postfix/sql_virtual_alias_maps.cf virtual_mailbox_domains = mysql:/etc/postfix/sql_virtual_domain_maps.cf virtual_mailbox_maps = mysql:/etc/postfix/sql_virtual_mailbox_maps.cf Tip: Because this is using the Dovecot's LDA, all results from virtual_mailbox_maps are ignored beyond checking if they exist. I added in the mysql db an alias postmaster(a)domainn.tld that should be forwarded to name(a)domainn.tld. The tip above tells me when using dovecot lda the virtual_alias_maps is ignored by dovecot. now when i send a mail to postmaster(a)domainn.tld the mail is not transported to name(a)domainn.tld. in logfile i see this: dovecot: auth-worker: sql(postmaster(a)zbfmail.de): Unknown user how can i tell dovecot to also use the virtual_alias_maps? thank you marko

1 0

[Dovecot] Problem with Dovecot and AD LDAP auth
by Алексей Переклад 07 Jun '12

07 Jun '12

Hi. Seems it's a bug in dovecot auth. I have FreeBSD 8.1-RELEASE-p1 and I tried 1.2.17 and 2.1.7 versions of Dovecot, and still no luck. The problem: when I set in dovecot-ldap.conf: base = CN=Users,DC=domain,DC=local everything works fine. But if I set: base = DC=domain,DC=local mail client can't authorize. /var/log/dovecot.log says: =============================================== Jun 07 18:07:17 auth: Debug: auth client connected (pid=14611) Jun 07 18:08:11 auth: Debug: client in: AUTH 1 PLAIN service=imap session=G1//aeLB6wAKAABu lip=10.0.0.3 rip=10.0.0.110 lport=143 rport=55787 resp=AGdhdGV3YXkAVU82eUpuUXQ= Jun 07 18:08:11 auth: Debug: ldap(gateway,10.0.0.110,<G1//aeLB6wAKAABu>): bind search: base=DC=domain,DC=local filter=(&(objectClass=person)(sAMAccountName=gateway)) Jun 07 18:08:11 auth: Debug: ldap(gateway,10.0.0.110,<G1//aeLB6wAKAABu>): result: uid missing Jun 07 18:10:18 imap-login: Info: Disconnected: Inactivity during authentication (disconnected while authenticating, waited 127 secs): user=<>, method=PLAIN, rip=10.0.0.110, lip=10.0.0.3, session=<G1//aeLB6wAKAABu> Jun 07 18:10:18 auth: Debug: client in: CANCEL 1 Jun 07 18:10:18 auth: Debug: auth client connected (pid=14706) Jun 07 18:10:26 auth: Debug: client in: AUTH 1 PLAIN service=imap session=n6IBcuLB7AAKAABu lip=10.0.0.3 rip=10.0.0.110 lport=143 rport=55788 resp=AGdhdGV3YXkAVU82eUpuUXQ= Jun 07 18:10:26 auth: Debug: ldap(gateway,10.0.0.110,<n6IBcuLB7AAKAABu>): bind search: base=DC=domain,DC=local filter=(&(objectClass=person)(sAMAccountName=gateway)) Jun 07 18:10:26 auth: Error: ldap(gateway,10.0.0.110,<n6IBcuLB7AAKAABu>): Connection appears to be hanging, reconnecting Jun 07 18:10:26 auth: Debug: ldap(gateway,10.0.0.110,<n6IBcuLB7AAKAABu>): result: uid missing Jun 07 18:10:26 auth: Error: ldap(gateway,10.0.0.110,<G1//aeLB6wAKAABu>): Request lost Jun 07 18:10:26 auth: Error: ldap(gateway,10.0.0.110,<n6IBcuLB7AAKAABu>): ldap_search(base=DC=domain,DC=local filter=(&(objectClass=person)(sAMAccountName=gateway))) failed: Operations error Jun 07 18:10:26 auth: Error: LDAP: Reply with unknown msgid 2 Jun 07 18:10:26 auth: Error: LDAP: Reply with unknown msgid 2 Jun 07 18:10:26 auth: Error: LDAP: Reply with unknown msgid 2 Jun 07 18:10:26 auth: Error: LDAP: Reply with unknown msgid 2 Jun 07 18:10:28 auth: Debug: client out: FAIL 1 user=gateway temp Jun 07 18:10:28 auth: Debug: client out: FAIL 1 user=gateway temp Jun 07 18:13:18 imap-login: Info: Disconnected: Inactivity (auth failed, 1 attempts in 172 secs): user=<gateway>, method=PLAIN, rip=10.0.0.110, lip=10.0.0.3, session=<n6IBcuLB7AAKAABu> ============================================ My dovecot-ldap.conf: =============================== ldap_version = 3 hosts = ad.domain.local base = DC=hrom,DC=local scope = subtree dn = CN=mailserver,CN=Users,DC=domain,DC=local dnpass = here_is_pass auth_bind = yes pass_attrs = uid=user pass_filter = "(&(objectClass=person)(sAMAccountName=%u))" user_attrs = name=mail=maildir:/var/mail/virtual/hrom.local/%n user_filter = "(&(objectClass=person)(sAMAccountName=%u))" =================================================== I need base = DC=domain,DC=local for searching for user's accounts in different OU of my AD. If I set base = CN=Users,DC=domain,DC=local, Dovecot can't authorize user accounts from OU. P.S.: Postfix with base = DC=domain,DC=local works perfectly, so the problem is not with our domain controller (LDAP server as well) .

1 0

[Dovecot] Email auto purging applied to all mail folders
by Joe V Aldeguer 07 Jun '12

07 Jun '12

Hello, Is it possible to have this done not only for spam and trash folder but lets say like the user inbox and any user created mail folders too? My ultimate goal is to have a way to automate the email deletion process of emails stored in the user inbox or mail folders when it reaches a specified date. My boss wants to force users to keep emails only a month old anything beyond that will be deleted. Has anyone done this using dovecot and are there any guides available? I am also open to suggestions for commercial solutions but so far searching online for solutions only comes up with email archiving. The dovecot version I have installed is version 2.0.19. Thanks in advance. - Joe

2 1