- dovecot - dovecot.org

[Dovecot] Antispam plugin not compatible with Dovecot 2.1
by interfaSys sàrl 20 Mar '12

20 Mar '12

Here is what I get when I try to compile the antispam plugin agaisnt Dovecot 2.1 ************** mailbox.c: In function 'antispam_save_begin': mailbox.c:138:12: error: 'struct mail_save_context' has no member named 'copying' mailbox.c: In function 'antispam_save_finish': mailbox.c:174:12: error: 'struct mail_save_context' has no member named 'copying' Failed to compile mailbox.c (plugin)! gmake[3]: *** [mailbox.plugin.o] Error 1 ************** The other objects compile fine. Cheers, Olivier

4 5

[Dovecot] dovecot, sieve and vacation
by Cedric Jeanneret 20 Mar '12

20 Mar '12

Hi there ! Have a small problem with sieve and vacation: it seems to descard the vacation filter I created instead of sending back an email: Mar 20 11:56:28 hostname dovecot: deliver(virtual_user): sieve: msgid=unspecified: discarding vacation response for message implicitly delivered to <virtual_user@hostname> after searching a bit on the net, I stumbled on another (old) thread: http://www.mail-archive.com/dovecot@dovecot.org/msg25955.html I'm not really sure it's the same problem, as I'm sending the mail from another host (via telnet, for testing purpose). Other sieve rules (such as flagging, moving and so on) work fine. Only vacation is crapy. Here's the roundcube generated rule: require ["vacation"]; if true { vacation :days 2 "on holidays!"; } Any help welcome :) Cheers, C. Informations: # 1.2.15: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-6-pve i686 Debian 6.0.4 simfs log_timestamp: %Y-%m-%d %H:%M:%S protocols: imaps pop3s managesieve listen(default): * listen(imap): * listen(pop3): * listen(managesieve): localhost:2000 ssl_cipher_list: ALL:!LOW:!SSLv2 login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login login_executable(managesieve): /usr/lib/dovecot/managesieve-login first_valid_uid: 8 mail_privileged_group: mail mail_uid: mail mail_gid: mail mail_location: maildir:/var/local/vmail/%n mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_executable(managesieve): /usr/lib/dovecot/managesieve mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 mail_plugin_dir(managesieve): /usr/lib/dovecot/modules/managesieve managesieve_logout_format(default): bytes=%i/%o managesieve_logout_format(imap): bytes=%i/%o managesieve_logout_format(pop3): bytes=%i/%o managesieve_logout_format(managesieve): bytes ( in=%i : out=%o ) lda: postmaster_address: foo(a)bar.com mail_plugins: sieve auth default: mechanisms: plain login user: mail passdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf.ext userdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf.ext socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: mail master: path: /var/run/dovecot/auth-master mode: 432 user: postfix group: mail plugin: home: /var/local/vmail/%u sieve: /var/local/vmail/%n/.dovecot.sieve sieve_dir: /var/local/vmail/%n/sieve sieve_extensions: +notify +imapflags

2 2

[Dovecot] Dsync Dovecot
by Jitendra Bhaskar 20 Mar '12

20 Mar '12

Hey Frnds, Could you tell me about the error : # dsync -Dv -u jitendra.b(a)example.com mirror jitendra.b(a)example.com doveadm(root): Debug: Loading modules from directory: /usr/local/lib/dovecot/doveadm doveadm(root): Debug: Skipping module doveadm_acl_plugin, because dlopen() failed: /usr/local/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so: undefined symbol: acl_user_module (this is usually intentional, so just ignore this message) doveadm(root): Debug: Skipping module doveadm_expire_plugin, because dlopen() failed: /usr/local/lib/dovecot/doveadm/lib10_doveadm_expire_plugin.so: undefined symbol: expire_set_lookup (this is usually intentional, so just ignore this message) doveadm(root): Debug: Skipping module doveadm_quota_plugin, because dlopen() failed: /usr/local/lib/dovecot/doveadm/lib10_doveadm_quota_plugin.so: undefined symbol: quota_user_module (this is usually intentional, so just ignore this message) doveadm(root): Debug: Skipping module doveadm_zlib_plugin, because dlopen() failed: /usr/local/lib/dovecot/doveadm/lib10_doveadm_zlib_plugin.so: undefined symbol: i_stream_create_deflate (this is usually intentional, so just ignore this message) doveadm(root): Debug: Skipping module doveadm_fts_plugin, because dlopen() failed: /usr/local/lib/dovecot/doveadm/lib20_doveadm_fts_plugin.so: undefined symbol: fts_list_backend (this is usually intentional, so just ignore this message) doveadm(jitendra.b(a)example.com): Debug: Effective uid=3846, gid=3846, home=/home/example1.com/jitendra.b doveadm(jitendra.b(a)example.com): Debug: Namespace inbox: type=private, prefix=, sep=, inbox=yes, hidden=no, list=yes, subscriptions=yes location=mbox:/home/ example.com/jitendra.b/mail:INBOX=/var/spool/example.com/jitendra.b doveadm(jitendra.b(a)example.com): Debug: fs: root=/home/ example.com/jitendra.b/mail, index=, control=, inbox=/var/spool/ example.com/jitendra.b, alt= dsync-local(jitendra.b(a)example.com): Debug: Namespace : Using permissions from /home/example.com/jitendra.b/mail: mode=0777 gid=-1 doveadm(jitendra.b): Fatal: User doesn't exist dsync-local(jitendra.b(a)example.com): Error: read() from worker server failed: EOF -- * Thanks & Regards * *Jitendra Kumar Bhaskar* Cell:- +91 7306311531 +91 8102997821

2 1

[Dovecot] Dovecot with postfix setup
by evolution age 20 Mar '12

20 Mar '12

Hey frnds, Could you suggest me any ebook or documentation for the setup of dovecot with postfix on centos 5.7 . I need it. -- Warm Regards Jitendra Kumar Bhaskar cell :- +91-8886742555

3 2

[Dovecot] IMAP and POP3 per SSL
by Lamprecht, Andreas 20 Mar '12

20 Mar '12

Hi! I'm new to this list and i could not find a way to search through the already posted articles, so please forgive me if this subject has been discussed before. Our security scanner stumbled over the IMAPs server i've set up recently using dovecot on a RedHat Enterprise 64bit Server. The security scanner found an error regarding a new SSL security leak named "BEAST". The exact error number is CVE-2011-3389. Details can be found here: http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-3389 "The internet" has some workarounds for this problem. For example, in Apache webserver, you need to set SSLHonorCipherOrder On in apache config. This results in the following C-Code being executed: SSL_CTX_set_options(ctx, SSL_OP_CIPHER_SERVER_PREFERENCE); This setting tells OpenSSL not to honor the Ciper Order sent from the client, but prefer it's own configured set of CipherSuites. According to Qualis SSL Labs ( https://www.ssllabs.com/ssldb/index.html ), a webserver configured with this setting is not affected by that BEAST security leak. Is there a way to implement such a setting into Dovecot, too? I have created a very quick and dirty solution to avoid being listed on our internal security problem's list. This patch is for dovecot 2.0.9 which is included in Redhat Enterprise Linux 6.2: *** src/login-common/ssl-proxy-openssl.c 2010-12-30 10:42:54.000000000 +0100 --- src/login-common/ssl-proxy-openssl.c_1 2012-03-20 09:48:28.359508087 +0100 *************** *** 924,930 **** X509_STORE *store; STACK_OF(X509_NAME) *xnames = NULL; ! SSL_CTX_set_options(ssl_ctx, SSL_OP_ALL | SSL_OP_NO_SSLv2); if (*set->ssl_ca != '\0') { /* set trusted CA certs */ store = SSL_CTX_get_cert_store(ssl_ctx); --- 924,930 ---- X509_STORE *store; STACK_OF(X509_NAME) *xnames = NULL; ! SSL_CTX_set_options(ssl_ctx, SSL_OP_ALL | SSL_OP_NO_SSLv2 | SSL_OP_CIPHER_SERVER_PREFERENCE ); if (*set->ssl_ca != '\0') { /* set trusted CA certs */ store = SSL_CTX_get_cert_store(ssl_ctx); Of course there should be a way to switch this setting on or off, but my C programming skills are rather basic ... So, maybe you have the time to look over it and implement a final solution for the BEAST problem. Greetings Andreas lamprecht

2 2

[Dovecot] INBOX cant be created
by Radim Kolar 20 Mar '12

20 Mar '12

Inbox does not exists on disk, but following command sequence will not create it. 2 select INBOX 2 NO Mailbox doesn't exist: INBOX 3 create INBOX 3 NO [ALREADYEXISTS] Mailbox already exists: INBOX i think its bug

4 5

[Dovecot] Problem with sieve
by Cédric Jeanneret 20 Mar '12

20 Mar '12

Hello List! I have a tiny-teeny problem with dovecot + sieve: it seems that the LDA doesn't run sieve, and thus doesn't filter my emails. Here's the sieve configuration: plugin { # Used by both the Sieve plugin and the ManageSieve protocol sieve=/var/local/vmail/%n/dovecot.sieve sieve_dir=/var/local/vmail/%n/sieve sieve_extensions = +notify +imapflags } The managesiege: protocol managesieve { # Specify an alternative address:port the daemon must listen on # (default: *:2000) listen = localhost:2000 managesieve_logout_format = bytes ( in=%i : out=%o ) } (this one is working fine, I can edit the filters through roundcube webmail, and the correct file (/var/local/vmail/%n/dovecot.sieve) is edited) the lda part: protocol lda { postmaster_address = foo(a)bar.com mail_plugins = sieve } I think all is in place to allow dovecot to use sieve... ? One more thing: dovecot --version 1.2.15 Any help will be welcomed :). Thanks in advance ! Cheers, C.

5 12

[Dovecot] Per-user IMAP enable - is it possible?
by Alexander Chekalin 20 Mar '12

20 Mar '12

Just wonder if it is possible to enable/disable IMAP4 on Dovecot (2.0.x as far) on per-user basis? The deal is simple: our policy is not to store a lot of mailing on mailserver (the user should store it locally), thus the 'use POP3' approach, but for a vary few users it is permitted to use IMAP4. But users sometimes simple miss the point that some mail clients (e.g. TB) 'prefer' to use IMAP4 first, and afterward I see mailbox full of mailings and no local store of it on user's workstation. Sound too complicated, but setting up two Dovecots is not something I'd love to do as well. Thank you for any ideas, Alexander

3 4

[Dovecot] Dsync Dovecot
by Jitendra Bhaskar 20 Mar '12

20 Mar '12

Hi guys, I am using dovecot-2.1.0 in centos 5.7, I configured dovecot with postfix in 2 system both system is having same configuration and os. I want to use dsync in mirror mode via ssh but I am not able to do it. When I followed the dsync wiki then I an unable to find the username : *dsync -u username mirror ssh -i id_dsa.dovecot mailuser(a)example.com dsync -u username* In the above command what will b user name and id_dsa.dovecot I am unable to understand. -- * Thanks & Regards * *Jitendra Kumar Bhaskar* Cell:- +91 7306311531 +91 8102997821

2 1

Re: [Dovecot] Using plaintext auth and SSL
by Jeff Simmons 20 Mar '12

20 Mar '12

On Monday, March 19, 2012 04:16:46 pm you wrote: > On 3/19/2012 4:04 PM, Jeff Simmons wrote: > > I'm working with a company that presently has a Linux mailserver which > > all users have (no shell) accounts on. Mail is accessed via pop3 with > > plaintext authentication. They want to move to a system using imap with > > SSL. I'm building them a new server. I'd like to offer both for a while > > so we can work the bugs out and migrate users over to SSL imap over > > time. It appears that in order to limit the imap connections to SSL I > > will need to run two separate instances of Dovecot. Is this correct? > > I only have SSL or TLS connections enabled and I only have one copy of > Dovecot running. Let me rephrase that. I want to run plaintext authentication pop3 and ssl/tls only authentication imap. The 'allow plaintext authentication' configuration directive appears to be global, meaning I will need to run two instances of dovecot for a while. Is that correct, or can this be done on a single instance of dovecot? -- Jeff Simmons jsimmons(a)goblin.punk.net Simmons Consulting - Network Engineering, Administration, Security "You guys, I don't hear any noise. Are you sure you're doing it right?" -- My Life With The Thrill Kill Kult

5 6

[Dovecot] Using plaintext auth and SSL
by Jeff Simmons 20 Mar '12

20 Mar '12

I'm working with a company that presently has a Linux mailserver which all users have (no shell) accounts on. Mail is accessed via pop3 with plaintext authentication. They want to move to a system using imap with SSL. I'm building them a new server. I'd like to offer both for a while so we can work the bugs out and migrate users over to SSL imap over time. It appears that in order to limit the imap connections to SSL I will need to run two separate instances of Dovecot. Is this correct? -- Jeff Simmons jsimmons(a)goblin.punk.net Simmons Consulting - Network Engineering, Administration, Security "You guys, I don't hear any noise. Are you sure you're doing it right?" -- My Life With The Thrill Kill Kult

1 0

[Dovecot] Creating an IMAP repo for ~100 users need some advice
by Kaya Saman 19 Mar '12

19 Mar '12

Hi, I am currently in the process of setting up an IMAP repository for round 100 users.... Currently the user authentication method is being handled via a Windows Domain Controller. The host OS for Dovecot will either be FreeBSD or CentOS. Would Dovecot be able to authenticate to either the DC directly or would we need to go through LDAP?? Additionally what would be the best method to store the **mail** information? - as in MySQL database or Maildir format; coinciding with this what is the best backup method in order to be able to do 'dump' backups or restore single emails?? Can anyone give me a hand with this? Regards, Kaya

8 21

[Dovecot] Accessing maildir snapshots through dovecot
by Laurent CARON 19 Mar '12

19 Mar '12

Hi, I'm currently having a fairly simple setup: - users (real, not virtual) - Maildir storage (over NFS) - 1 namespace I'm currently trying to render the storage snapshots available through dovecot (to allow my users to browse their mail history). dovecot.conf: namespace { inbox = yes location = prefix = INBOX. type = private } I did the following modifications: dovecot.conf: namespace snaps-h0 { prefix = INBOX.EmailBackup.h0. hidden = no list = yes inbox = no location = maildir:/home/.snapshot/hourly.0/%u/Maildir:INDEX=/var/tmp/dovecot/indexes/hourly.0/%u:CONTROL=/var/dovecot/control/hourly.0/%u type = private } Problem: I don't see the content of the inbox folder contained in the snapshots (subfolders are perfectly viewed). Do any of you have a clue on how to render it visible ? Thanks Laurent

3 3

[Dovecot] Building Dovecot RHEL RPMs with custom LDAP packages
by Nikolaos Milas 19 Mar '12

19 Mar '12

Hi, We are (still) mainly using CentOS 5 (5.8 x86_64). As CentOS / RHEL 5 standard OpenLDAP packages are rather old (2.3.x), we've been using LTB OpenLDAP packages (http://ltb-project.org/wiki/download#openldap) which get installed in non-standard file system locations. So, I would like to re-build Dovecot packages based on these OpenLDAP libraries, esp. because I see that dovecot RPM packages are built using OpenLDAP v2.3 libraries. I am not much experienced in building RPMs and preparing spec files. In http://dl.atrpms.net/all/dovecot.spec I see: ------------------------------------------------ BuildRequires: openldap-devel, cyrus-sasl-devel ... Obsoletes: %{name}-pgsql < %{epoch}:%{version}-%{release}, %{name}-mysql < %{epoch}:%{version}-%{release}, %{name}-sqlite < %{epoch}:%{version}-%{release}, %{name}-ldap < %{epoch}:%{version}-%{release}, $ Conflicts: %{name}-pgsql > %{epoch}:%{version}-%{release}, %{name}-mysql > %{epoch}:%{version}-%{release}, %{name}-sqlite > %{epoch}:%{version}-%{release}, %{name}-ldap > %{epoch}:%{version}-%{release}, $ ------------------------------------------------ So, I can change the former reference (openldap-devel) to: openldap-ltb-debuginfo, cyrus-sasl-devel Question 1: What other changes should we make in order to specify that we will be using LDAP libraries from: /usr/local/openldap/lib64 and include files from: /usr/local/openldap/include (rather than from /usr/lib64 and /usr/include, respectively, which are the standard file paths used in openldap-devel) Question 2: How the Obsoletes and Conflicts lines should be changed? Question 3: It seems to me (by reading the spec file) that the final Dovecot RPM (and the included executables) does not need any LDAP dynamic library in order to run with LDAP support (because I don't see any dependencies on openldap package). Can somebody please confirm? Any other associated info would be appreciated. Thanks, Nick

2 4

[Dovecot] importing plain mboxes to dovecot maildirs
by Radim Kolar 19 Mar '12

19 Mar '12

Is there way to import old plain mboxes via dsync? It complains about lack of index files: ponto:(admin)~>dsync mirror mbox:~/mail dsync(admin): Error: Failed to sync mailbox sent-mail: Mailbox GUIDs are not permanent without index files dsync(admin): Error: Failed to sync mailbox saved-messages: Mailbox GUIDs are not permanent without index files dsync(admin): Error: Failed to sync mailbox sent-mail-feb-2012: Mailbox GUIDs are not permanent without index files

2 3

[Dovecot] mdbox and filesystem quota
by Arkadiusz Miśkiewicz 18 Mar '12

18 Mar '12

http://wiki2.dovecot.org/MailboxFormat/dbox "Expunging a message only decreases the message's refcount. The space is later freed in "purge" step. This is typically done in a nightly cronjob when there's less disk I/O activity. " What happens if there is filesystem hard quota that is exceeded? Will dovecot allow to delete mails to free space without a need to wait for cronjob to do the purge? -- Arkadiusz Miśkiewicz PLD/Linux Team arekm / maven.pl http://ftp.pld-linux.org/

2 3

[Dovecot] POP3 Performance
by Mauricio López Riffo 17 Mar '12

17 Mar '12

Hi, We actually have a mail hosting solutions with aprox. 100 thousand of email account, where about 90% of a customers use POP3 like email configuration. About a few mounths (we perfomed a lot of migration throught mbox email software to Maildir with dovecot) but i can see that the performance is very poor and receive complaint about delays of autentications of accounts. The solution lives in Metrocluster Netapp storage, filesystem NFS, VMware as a virtualization (the mtas are a virtual machines lives in netapp too) about 4T of data mails and a 10G network connection (betwen mtas and nfs storage) All account information work in LDAP plataform (two servers in replicated mode, no high average or delays detected in this servers) When the traffic have a peak of 1800 concurrent connections POP3, all of service suffer a high load average (about 8 - 20 load average in each dovecot) and authenticacion takes about 2 -10 seconds (in low traffic, autenticacion takes about 60 miliseconds) Also, each dovecot instance lives un MTA server CentOS 5.8 x86_64 with 6G RAM (virtual machine) and share's hardware with a exim instance, like a MTA relay system (autenticated relay) Usage of network have peaks of 80Mbits (all dmz network have 1Gbits of bandwith) Attach of dovecot -n output: # 2.0.18: /etc/dovecot/dovecot.conf # OS: Linux 2.6.18-308.1.1.el5 x86_64 CentOS release 5.8 (Final) auth_debug_passwords = yes auth_default_realm = portalplata.cl auth_realms = portalplata.cl auth_verbose = yes auth_verbose_passwords = plain auth_worker_max_count = 100 base_dir = /var/run/dovecot/ debug_log_path = /var/log/dovecot.log default_process_limit = 200 default_vsz_limit = 512 M disable_plaintext_auth = no first_valid_gid = 12 first_valid_uid = 8 lock_method = dotlock login_greeting = Dovecot mta10 mail_cache_min_mail_count = 5 mail_debug = yes mail_fsync = always mail_full_filesystem_access = yes mail_gid = 12 mail_location = maildir:%h/Maildir:INDEX=/data/cache/indexes/%2d/%1u/%2u/%u mail_nfs_storage = yes mail_plugins = " quota" mail_uid = 8 maildir_copy_with_hardlinks = no passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename mail_log_fields = box from subject quota = maildir } postmaster_address = mail(a)mail.com protocols = imap pop3 sendmail_path = /usr/lib/sendmail service auth { unix_listener auth-userdb { mode = 0600 user = exim } } service imap-login { service_count = 0 } service imap-postlogin { executable = script-login /usr/local/bin/postlogin.sh user = root } service imap { executable = imap imap-postlogin } service pop3-login { inet_listener pop3s { port = 995 ssl = yes } service_count = 0 } service pop3 { process_limit = 1024 } ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } verbose_proctitle = yes protocol lmtp { mail_plugins = " quota" } protocol lda { mail_plugins = " quota" } protocol imap { imap_capability = mail_max_userip_connections = 10 mail_plugins = " quota autocreate notify quota imap_quota mail_log" plugin { autocreate = Sent Items autocreate2 = Spam autocreate3 = Drafts autocreate4 = Trash autosubscribe = Sent Items autosubscribe2 = Spam autosubscribe3 = Drafts autosubscribe4 = Trash } } protocol pop3 { mail_plugins = " quota quota notify mail_log" pop3_reuse_xuidl = yes pop3_save_uidl = yes pop3_uidl_format = %u } Output of account information in a LDAP: # nettester, email.net, MAIL, USERS, cl dn: uid=nettester,dc=email.net,o=MAIL,o=USERS,c=cl dc: email.net mailMessageStore: /export/mdir/3/12/nettester(a)email.net/Maildir uid: nettester cn: nettester(a)email.net sn: nettester(a)email.net gidNumber: 12 homeDirectory: /export/mdir/3/12/nettester(a)email.net mail: nettester(a)email.net uidNumber: 8 objectClass: mailUser objectClass: posixAccount objectClass: mailSetting loginShell: /bin/false description: enable service: pop3 service: imap service2: webmail mailRate: 200 mailQuota: 1024M deliveryMode: none mailReplyText: . Any suggestions? All ideas will be have a good receptions ;) Pd: Sorry my english -- Mauricio López Riffo Red Hat Certified Engineer 804006455319519 Administrador de Servicios Internet Área Ingeniería Gtd Internet S.A. http://www.grupogtd.com/ Moneda 920, Oficina 602 - Fono : +562 4139742

7 9

[Dovecot] Update problem from 1.2 => 2.0.19 and recommended imap storage
by Gerhard Wiesinger 17 Mar '12

17 Mar '12

Hello, After fixing configuration and other issues I'm still having one problem with imap executable and pine: less .pinerc # Changed config: #rsh-command=/usr/sbin/dovecot --exec-mail imap rsh-command=/usr/local/bin/imap Calling imap still fails as non root: imap /usr/bin/ld: cannot open output file /usr/local/bin/.libs/2612-lt-imap: Permission denied collect2: ld returned 1 exit statusn Any ideas to fix it? BTW: What is the recommended dovecot storage for dovecot 2.x (upgradeable from mbox)? Thnx. Ciao, Gerhard

2 2

[Dovecot] Just in time AV scanning
by Kelsey Cummings 16 Mar '12

16 Mar '12

I'm curious if anyone has any plugins for AV integration directly into dovecot. Our old pop servers have been scanning messges as they're moved from new->cur in the inbox and, at least where user's aren't poping every few seconds, there is occasionally enough time between scanning through the MXs to message retreval to snag a few more virues with updated definitions before they reach customers. Anyone doing anything similar? -- Kelsey Cummings - kgc(a)corp.sonic.net sonic.net, inc. System Architect 2260 Apollo Way 707.522.1000 Santa Rosa, CA 95407

3 4

[Dovecot] Problem copying e-mails to IMAP - Dovecot 2.1.2
by Odhiambo Washington 16 Mar '12

16 Mar '12

I have a situation where I need to migrate e-mails from Outlook 2011 (Mac) to Apple Mail. Having looked at all options, I have resorted to the, perhaps, most difficult way: Create folders on the IMAP server, copy e-mails into them from Outlook, connect Apple Mail and do the reverse. However, I have hit a wall. I am running Dovecot 2.1.2 on FreeBSD, with mdbox storage. In my first attempt, I have 1792 messages in the "Sent Items" folder for Outlook. I have tried (3 times) to copy the messages to the IMAP/Sent Items folder, but the process dies at some point. When that happens, Outlook pops a screen saying "IMAP session state is inconsistent, please relogin". Dovecot says: Mar 16 13:30:26 jaribu dovecot: master: Warning: Killed with signal 15 (by pid=72242 uid=0 code=kill) Mar 16 13:30:29 master: Info: Dovecot v2.1.2 starting up Mar 16 13:31:15 auth-worker(72594): Info: mysql(localhost): Connected to database exim4u Mar 16 13:31:15 imap-login: Info: Login: user=<wash(a)kictanet.or.ke>, method=PLAIN, rip=192.168.40.194, lip=192.168.40.252, mpid=72595 Mar 16 13:31:15 imap: Debug: Loading modules from directory: /opt/dovecot2.1/lib/dovecot Mar 16 13:31:15 imap: Debug: Module loaded: /opt/dovecot2.1/lib/dovecot/lib10_quota_plugin.so Mar 16 13:31:15 imap(wash(a)kictanet.or.ke): Debug: Effective uid=26, gid=26, home=/var/spool/virtual/kictanet.or.ke/wash Mar 16 13:31:15 imap(wash(a)kictanet.or.ke): Debug: quota: No quota setting - plugin disabled Mar 16 13:31:15 imap(wash(a)kictanet.or.ke): Debug: Namespace inbox: type=private, prefix=, sep=, inbox=yes, hidden=no, list=yes, subscriptions=yes location=mdbox:~/mdbox Mar 16 13:31:15 imap(wash(a)kictanet.or.ke): Debug: fs: root=/var/spool/virtual/kictanet.or.ke/wash/mdbox, index=, control=, inbox=, alt= Mar 16 13:31:15 imap(wash(a)kictanet.or.ke): Debug: Namespace : Using permissions from /var/spool/virtual/kictanet.or.ke/wash/mdbox: mode=0700 gid= -1 Mar 16 13:31:30 imap-login: Info: Login: user=<wash(a)kictanet.or.ke>, method=PLAIN, rip=192.168.40.194, lip=192.168.40.252, mpid=72646 Mar 16 13:31:30 imap: Debug: Loading modules from directory: /opt/dovecot2.1/lib/dovecot Mar 16 13:31:30 imap: Debug: Module loaded: /opt/dovecot2.1/lib/dovecot/lib10_quota_plugin.so Mar 16 13:31:30 imap(wash(a)kictanet.or.ke): Debug: Effective uid=26, gid=26, home=/var/spool/virtual/kictanet.or.ke/wash Mar 16 13:31:30 imap(wash(a)kictanet.or.ke): Debug: quota: No quota setting - plugin disabled Mar 16 13:31:30 imap(wash(a)kictanet.or.ke): Debug: Namespace inbox: type=private, prefix=, sep=, inbox=yes, hidden=no, list=yes, subscriptions=yes location=mdbox:~/mdbox Mar 16 13:31:30 imap(wash(a)kictanet.or.ke): Debug: fs: root=/var/spool/virtual/kictanet.or.ke/wash/mdbox, index=, control=, inbox=, alt= Mar 16 13:31:30 imap(wash(a)kictanet.or.ke): Debug: Namespace : Using permissions from /var/spool/virtual/kictanet.or.ke/wash/mdbox: mode=0700 gid= -1 Mar 16 13:31:30 imap: Debug: Loading modules from directory: /opt/dovecot2.1/lib/dovecot Mar 16 13:31:30 imap: Debug: Module loaded: /opt/dovecot2.1/lib/dovecot/lib10_quota_plugin.so Mar 16 13:31:30 imap(wash(a)kictanet.or.ke): Debug: Effective uid=26, gid=26, home=/var/spool/virtual/kictanet.or.ke/wash Mar 16 13:31:30 imap(wash(a)kictanet.or.ke): Debug: quota: No quota setting - plugin disabled Mar 16 13:31:30 imap(wash(a)kictanet.or.ke): Debug: Namespace inbox: type=private, prefix=, sep=, inbox=yes, hidden=no, list=yes, subscriptions=yes location=mdbox:~/mdbox Mar 16 13:31:30 imap(wash(a)kictanet.or.ke): Debug: fs: root=/var/spool/virtual/kictanet.or.ke/wash/mdbox, index=, control=, inbox=, alt= Mar 16 13:31:30 imap(wash(a)kictanet.or.ke): Debug: Namespace : Using permissions from /var/spool/virtual/kictanet.or.ke/wash/mdbox: mode=0700 gid=-1 Mar 16 13:31:30 imap-login: Info: Login: user=<wash(a)kictanet.or.ke>, method=PLAIN, rip=192.168.40.194, lip=192.168.40.252, mpid=72647 Mar 16 13:33:23 jaribu dovecot: imap(wash(a)kictanet.or.ke): Error: Corrupted dbox file /var/spool/virtual/kictanet.or.ke/wash/mdbox/storage/m.4 (around offset=894): msg header has bad magic value Mar 16 13:33:23 jaribu dovecot: imap(wash(a)kictanet.or.ke): Warning: mdbox /var/spool/virtual/kictanet.or.ke/wash/mdbox/storage: rebuilding indexes Mar 16 13:33:23 jaribu dovecot: imap(wash(a)kictanet.or.ke): Error: /var/spool/virtual/kictanet.or.ke/wash/mdbox/mailboxes/SentItems/dbox-Mails/dovecot.index reset, view is now inconsistent Mar 16 13:33:23 imap(wash(a)kictanet.or.ke): Info: Disconnected: IMAP session state is inconsistent, please relogin. bytes=13816863/907529 My doveconf output is here -> http://pastebin.com/6yNP5ygt -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254733744121/+254722743223 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ I can't hear you -- I'm using the scrambler. Please consider the environment before printing this email.

4 11

[Dovecot] v2.1.3 released
by Timo Sirainen 16 Mar '12

16 Mar '12

http://dovecot.org/releases/2.1/dovecot-2.1.3.tar.gz http://dovecot.org/releases/2.1/dovecot-2.1.3.tar.gz.sig Do not use v2.1.2 with multi-dbox format, it's broken. I didn't notice that a small optimization I did a few days ago broke mdbox in some situations (when mdbox first created a new m.X file, and later in same session saved another message to it). It's quite a high priority for me to run some automated testing before releasing new versions, for example a small imaptest run with mdbox would have caught this. Perhaps the next release will already have the automated testing.

1 0

[Dovecot] Another hint from the clue box 8-) imapc/imap proxy user mailbox server location
by Terry Carmen 16 Mar '12

16 Mar '12

I'm running imapproxy as shown at http://wiki2.dovecot.org/HowTo/ImapcProxy. In fact, that's my config in the wiki. 8-) It's been working, but has performance issues when the Exchange server that's hard-coded as imapc_host=xxx.xxx.xxx.xxx doesn't happen to be the user's home exchange server. I'd like to point dovecot at the correct Exchange server based on an LDAP query, and in fact, have an LDAP search that works: DC=example,DC=com (&(objectCategory=person)(objectClass=user)(!(userAccountcontrol:1.2.840.113556.1.4.803:=2))(sAMAccountName=username)) With the exchange server being returned in the msExchHomeServerName property as: /O=example/OU=INT/cn=Configuration/cn=Servers/cn=exchangeservername I believe this should somehow end up in the userdb section, which currently contains "driver = prefetch", but can't seem to figure out specifically what should be there. The only important part is "cn=exchangeservername", which is the machine name and would need to be prepended to example.com to get the fqdn. Can anybody toss me a clue? Once I get it working, I'll update the wiki. Thanks! Terry

4 14

[Dovecot] ldapi support
by Nikolaos Milas 16 Mar '12

16 Mar '12

Hi, Quick question: Does Dovecot support ldapi (i.e. via Unix Sockets) connections for LDAP lookups (user, password, auth etc.) or only ldap/ldaps (over TCP)? If yes, how do we specify ldapi://localhost in Dovecot configuration files? Thanks, Nick

2 1

[Dovecot] imaptest: performance testing
by Nick Urbanik 16 Mar '12

16 Mar '12

Dear Folks, Using head of imaptest with dovecot 2.1, I am attempting to put a heavy load on the server, with insufficient success. I made 15000 user accounts, put them in to a file, one per line. Then I ran imaptest with ./imaptest userfile=../../imap-test-userlist-15001.txt clients=15001 pass=SECRETPASSWORD But CPU load is only reaching 20. I put an mbox containing 67 messages into ~/mail/dovecot-crlf So what is the best way to put a really heavy load on an imap server? The documentation describes testing correctness of the server without really emphasising performance. I would like to do something like dnsperf, which adds a linearly increasing load until the server is unable to cope. This machine has 24G RAM and 8 cores. I'll be grateful for any constructive suggestions. -- Nick Urbanik http://nicku.org nicku(a)nicku.org GPG: 7FFA CDC7 5A77 0558 DC7A 790A 16DF EC5B BB9D 2C24 ID: BB9D2C24

3 2

[Dovecot] Upgrading from 2.0.x to 2.1.x
by Nikolaos Milas 16 Mar '12

16 Mar '12

Hi, A quick question: Are there any incompatibilities in config settings among versions 2.0.x and 2.1.x (and subsequently v2.2.x)? That is, upgrading Dovecot 2.0.x to 2.1.x software, will also require changes of any config settings (as upgrading from v1.x to 2.0.x did)? Thanks, Nick

2 2

[Dovecot] Lack of external documentation?
by Steve Campbell 16 Mar '12

16 Mar '12

Firstly, this isn't meant to be critical, and I realize the subject line probably suggest criticism, so... I was sort of forced into using dovecot as my imap/pop server due to upgrading 3 versions of OS on my mail servers. So far, that's not bad. What surprises me is that one of the first things I usually do whenever I start using different software is to purchase a book that seems to suit me. Searching all of the common places like amazon, ebay, etc for manuals turned up little to nothing on dovecot. I'm wondering why and is this so new that people just haven't written books about it yet? The one thing I'm a little critical of, though, is that trying to make heads or tails of dovecot by following the online documentation is a little problematic. I'm constantly jumping to another page and then back to the original page, and for the most part, I just don't know enough about it all yet to know what I'm looking for. Does anyone know of any manuals/books that have been written that might introduce me to most of the stuff in dovecot? So far, the list has been great, but once the "dsync" threads started popping up, I find there's even more I don't know about. Thanks for all the help I've received so far and I think I'm really going to like dovecot. Once I get the hang of it, I'll probably reduce the amount of noise on the list by half. steve campbell

8 8

[Dovecot] v2.1.2 released
by Timo Sirainen 16 Mar '12

16 Mar '12

http://dovecot.org/releases/2.1/dovecot-2.1.2.tar.gz http://dovecot.org/releases/2.1/dovecot-2.1.2.tar.gz.sig There are a ton of proxying related improvements in this release. You should now be able to do pretty much anything you want with Dovecot proxy/director. This release also includes the initial version of dsync-based replication. I'm already successfully using it for @dovecot.fi mails, but it still has some problems. See http://dovecot.org/list/dovecot/2012-March/064243.html for some details how to configure it. + Initial implementation of dsync-based replication. For now this should be used only on non-critical systems. + Proxying: POP3 now supports sending remote IP+port from proxy to backend server via Dovecot-specific XCLIENT extension. + Proxying: proxy_maybe=yes with host=<hostname> (instead of IP) works now properly. + Proxying: Added auth_proxy_self setting + Proxying: Added proxy_always extra field (see wiki docs) + Added director_username_hash setting to specify what part of the username is hashed. This can be used to implement per-domain backends (which allows safely accessing shared mailboxes within domain). + Added a "session ID" string for imap/pop3 connections, available in %{session} variable. The session ID passes through Dovecot IMAP/POP3 proxying to backend server. The same session ID is can be reused after a long time (currently a bit under 9 years). + passdb checkpassword: Support "credentials lookups" (for non-plaintext auth and for lmtp_proxy lookups) + fts: Added fts_index_timeout setting to abort search if indexing hasn't finished by then (default is to wait forever). - doveadm sync: If mailbox was expunged empty, messages may have become back instead of also being expunged in the other side. - director: If user logged into two directors while near user expiration, the directors might have redirected the user to two different backends. - imap_id_* settings were ignored before login. - Several fixes to mailbox_list_index=yes - Previous v2.1.x didn't log all messages at shutdown. - mbox: Fixed accessing Dovecot v1.x mbox index files without errors.

4 4

[Dovecot] problems with SSH-based clustering dovecot 2.1.1
by Michescu Andrei 16 Mar '12

16 Mar '12

Hello, I'm using dovecot 2.1.1 with vpopmail 5.4.30 with multiples domains and I have problems setting up synchronization in between multiple computers. All act like master (my clients can connect to any of the them and read their emails either via POP3 either via IMAP, inbound email gets on any of the machines). Each machine is on a different continent, there is no shared drive in between and the synchronization is supposed to be asynchronous via cron scripts. To simplify the case, let's consider 2 machines (mx1.a and mx2.a) with 3 virtual domains (a and b and c). On both machine domain a is the default domain (needs only username to connect to imap). Initially I synchronize mx1.a with mx2.a using rsync. I check that I can login using dovecot. I tried any of the following commands to synchronize the 2 machines: mx1.a$ doveadm -Dv sync -u user1@a -f ssh mx2.a doveadm dsync-server -u user1@a mx1.a$ doveadm -Dv sync -u user1@a ssh mx2.a doveadm -u user1@a mx1.a$ doveadm -Dv sync -u user1@a user1@a The only thing that happens is that the on each machine the folders get doubled with some random extension (eg. Inbox becomes Inbox_3e3ff3g3gb3bb3b22). Also, another bug, if there is a domain setup as default (auth_default_realm) dsync simply ignores the specified -u <user> and attempts to sync the first email in the default domain. Please advise. # 2.1.1: /etc/dovecot/dovecot/dovecot.conf # OS: Linux 2.6.38-b i686 Slackware 13.0.0.0.0 auth_debug = yes auth_debug_passwords = yes auth_default_realm = a first_valid_gid = 89 first_valid_uid = 89 last_valid_gid = 89 last_valid_uid = 89 listen = * log_path = /dev/stderr login_greeting = A login_trusted_networks = 192.168.20.64/26 mail_debug = yes mail_gid = vchkpw mail_location = maildir:~/Maildir mail_privileged_group = vchkpw mail_uid = vpopmail passdb { driver = vpopmail } protocols = imap pop3 service auth-worker { unix_listener auth-worker { user = vpopmail } user = vpopmail } service auth { user = vpopmail } service imap-login { user = vpopmail } service pop3-login { user = vpopmail } ssl = no userdb { driver = vpopmail }

5 24

[Dovecot] Compiler warnings in dovecot-2.1.2 and pigeonhole 0.3.0
by Tom Talpey 16 Mar '12

16 Mar '12

I'm seeing a few warnings emitted when building for x86. They're pretty obvious, but if you want the configure options etc, I can provide those. In Dovecot 2.1.2 (I also see some of these in 2.1.1): 1) src/lib-index/mail-cache-fields.c (comparison between two last_used fields) mail-cache-fields.c: In function 'mail_cache_header_fields_read': mail-cache-fields.c:406: warning: comparison between signed and unsigned 2) src/director/user-directory.c (comparison with ioloop_time) user-directory.c: In function 'user_directory_user_is_recently_updated': user-directory.c:147: warning: comparison between signed and unsigned 3) src/replication/replicator/replicator-brain.c (comparison with ioloop_time) replicator-brain.c: In function 'doveadm_replicate': replicator-brain.c:113: warning: comparison between signed and unsigned 4) src/replication/replicator/replicator-queue.c (comparison with ioloop_time) replicator-queue.c: In function 'replicator_queue_pop': replicator-queue.c:201: warning: comparison between signed and unsigned In Pigeonhole 0.3.0: 5) src/managesieve-login/client-authenticate.c (passing size_t * not uoff_t *) client-authenticate.c: In function 'managesieve_client_auth_read_response': client-authenticate.c:214: warning: passing argument 3 of 'i_stream_get_size' from incompatible pointer type

3 3

[Dovecot] 2.1.1: doveadm backup errors
by e-frog 15 Mar '12

15 Mar '12

Hello Timo, I'm experimenting with 'doveadm backup' on 2.1.1 (latest hg, full dovecot -n output attached) and haven't managed to get it working. This is what I have done: 1. Create the directory /tmp/backup which is empty 2. Run doveadm -v backup -u testuser(a)ubuntu-test.localdomain mdbox:/tmp/backup/ Then I see the following errors: doveadm -v backup -u testuser(a)ubuntu-test.localdomain mdbox:/tmp/backup/ dsync(testuser(a)ubuntu-test.localdomain): Error: Can't delete mailbox INBOX: INBOX can't be deleted. dsync(testuser(a)ubuntu-test.localdomain): Info: INBOX: only in dest (guid=9e4b88178b905f4f456e0000381555a6) dsync(testuser(a)ubuntu-test.localdomain): Info: INBOX: only in source (guid=bd05451f2fbb574d40600000ec8d17cd) dsync(testuser(a)ubuntu-test.localdomain): Error: Trying to open a non-listed mailbox with guid=9e4b88178b905f4f456e0000381555a6 dsync(testuser(a)ubuntu-test.localdomain): Error: msg iteration failed: Couldn't open mailbox 9e4b88178b905f4f456e0000381555a6 dsync(testuser(a)ubuntu-test.localdomain): Error: Trying to open a non-listed mailbox with guid=9e4b88178b905f4f456e0000381555a6 dsync(testuser(a)ubuntu-test.localdomain): Error: Mailbox INBOX changed its GUID (bd05451f2fbb574d40600000ec8d17cd -> 9e4b88178b905f4f456e0000381555a6) dsync(testuser(a)ubuntu-test.localdomain): Error: msg iteration failed: Couldn't open mailbox bd05451f2fbb574d40600000ec8d17cd dsync(testuser(a)ubuntu-test.localdomain): Error: Mailbox INBOX changed its GUID (bd05451f2fbb574d40600000ec8d17cd -> 9e4b88178b905f4f456e0000381555a6) It somehow finds INBOX in destination however the backup directory is newly created and empty. Thanks, e-frog

2 5

[Dovecot] Multiple locations, 2 servers - planning questions...
by Charles Marcus 15 Mar '12

15 Mar '12

Hello all/Timo, Up until now, my main Clients office has consisted of a single location, and I have never had to deal with the situation of multiple locations for a single company. They have just told me that they are acquiring an additional floor at a building that is about 4 minutes away - but obviously far enough away that I now have to deal with supporting users in the same domain but at two disparate physical locations. These two locations will be connected via a private Gb ethernet connection, and each location will have its own internet connection (I think - still waiting on some numbers to present to the owner to see what he wants to do in that regard, but that will be my recommendation), so bandwidth for replication won't be an issue. I have a couple of months to get this done, and I am already planning on hiring Timo's new commercial support company to help with the final and actual design and implementation, but obviously first I need to know what my actual options are. Just a rough idea of what I'd like to do is: 1. Set up one dovecot server at each location (these will be VMs), so users at each location are accessing the local server for that office 2. Full replication between the two for the mail/indexes, and configure them such that each can act as a failover for the other in case one goes down for whatever reason This is my first/main question... I recall that 'dsync based replication' is actually on the map for 2.1, but, since apparently dsync can't do this now, Timo, do you have even a rough idea how much work this would be to get it working for only 2 locations (assuming it *may* be easier to get the initial support for only 2 locations, my client may be willing to pay for it if it isn't a huge amount - feel free to reply privately to this question), then you could revisit it later to make it more scalable? Or, if it is going to take more work than my client is willing to pay for (I'm hoping not, since you said it was on the map for 2.1, not 2.2+), maybe the notify plugin could be leveraged in some way to provide something 'close enough' until it is fully implemented in dsync? On that note (something 'close enough' until dsync fully supports this natively), would setting up a dsync cron job, say, every 5 or 10 minutes, be asking for trouble? Our mail server is not all that busy, really, so in 5 or 10 minutes, there wouldn't be many changes at all. If that is not recommended, although I want to avoid the hassles of NFS if at all possible, maybe there is another shared filesystem that will work ok - or... since I will be forcing users to a single server always anyway, maybe NFS or some other shared filesystem is really the best option here, and just let it take care of the syncing? and 3. Configure things such that each offices users are directed to the local server for that office, but connections will fail-over to the remote server in the case of one of them going down for whatever reason? I'm fairly sure that some combination of Dovecot Proxy/Director will accomplish this, but one concern is - for internal users, my understanding is it will redirect them via the private IP, but that would result in lots of traffic across the Gb connection between the two locations, and I'd like to eliminate that if possible - so how will this work when they are accessing it from outside the office, where each office has its own public IP? I'd prefer to not rely on users using the correct hostname (currently, we just use 'mail.example.com', and I know I could set up two new ones - office1.example.com and office2.example.com - but then I'd be relying on the users to get it right, and I'd prefer to avoid that can of worms). I guess a worst case scenario (if there is no better way) would be to do it that way, then watch the logs for users who get it wrong and are using the inter-office connection, and deal with them on a case by case basis. Thanks to any/all for reading this far and for any thoughts, suggestions and/or ideas... -- Best regards, Charles

9 19

[Dovecot] director lmtp -> smtp problem
by Jim Lawson 15 Mar '12

15 Mar '12

Hi Timo & Dovecot users, We have a 2-node director setup which front-ends for 4 nodes which share a clustered filesystem (GFS). All nodes run Dovecot 2.0.18. Approximately 40k users, but typically only a few thousand active at any time. The director nodes run sendmail, which deliver mail "locally" using LMTP to the director, which then feeds to SMTP on the real servers (also sendmail.) Why sendmail? Because procmail is used for mail filtering and as the delivery agent. Here's the problem, on the director: Mar 14 20:40:08 imapdir2 dovecot: lmtp(10692): Connect from local Mar 14 20:40:38 imapdir2 dovecot: lmtp(10692): Panic: file lmtp-proxy.c: line 376 (lmtp_proxy_output_timeout): assertion failed: (proxy->data_input ->eof) Mar 14 20:40:38 imapdir2 dovecot: lmtp(10692): Error: Raw backtrace: /usr/lib/dovecot/libdovecot.so.0(+0x3d99a) [0x7f79156c499a] -> /usr/lib/doveco t/libdovecot.so.0(+0x3d9e6) [0x7f79156c49e6] -> /usr/lib/dovecot/libdovecot.so.0(i_error+0) [0x7f791569df8f] -> dovecot/lmtp() [0x406e77] -> /usr/l ib/dovecot/libdovecot.so.0(io_loop_handle_timeouts+0xd4) [0x7f79156d0044] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0x5b) [0x7f79156d 0c3b] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_run+0x28) [0x7f79156cfca8] -> /usr/lib/dovecot/libdovecot.so.0(master_service_run+0x13) [0x7f7915 6bdfc3] -> dovecot/lmtp(main+0x154) [0x403f84] -> /lib64/libc.so.6(__libc_start_main+0xfd) [0x7f7914ef8cdd] -> dovecot/lmtp() [0x403d69] Mar 14 20:40:38 imapdir2 sendmail[6905]: q2D8KodI018432: SYSERR(root): timeout writing message to localhost: Broken pipe Most mail goes through OK, but some messages do not and end up queued until they run into the queue time limit. So far as I have been able to tell, all of the messages have this failure when the following conversation takes place between sendmail (on director), the Dovecot LMTP proxy, and sendmail on the backend node (SMTP): (names mangled to protect the guilty) (first, sendmail -> director LMTP) > [root@imapdir2 ~]# sendmail -qIq2EFZt1p004708 -v > > Running /var/spool/mqueue/qd2/q2EFZt1p004708 (sequence 1 of 1) > <ntssdfwe(a)pobox2.uvm.edu>... Connecting to > /var/lib/dovecot/lmtp-socket via cyrusv2... > 220 imapdir2.uvm.edu Dovecot LMTP ready > >>> LHLO imapdir2.uvm.edu > 250-imapdir2.uvm.edu > 250-8BITMIME > 250-ENHANCEDSTATUSCODES > 250 PIPELINING > >>> MAIL From:<owner-dasfqeiuasd*Abrasf*-Gorpwe**UVM*-EDU(a)LIST.UVM.EDU> > 250 2.1.0 OK > >>> RCPT To:<ntssdfwe> > >>> DATA > 250 2.1.5 OK > 354 OK > timeout writing message to localhost: Broken pipe > <ntssdfwe(a)pobox2.uvm.edu>... Deferred > Closing connection to localhost The conversation between the director (LMTP) and the backend (sendmail SMTP) goes like this: > 250-penguinc.uvm.edu Hello imapdir2.uvm.edu [132.198.100.150], pleased > to meet you > 250-ENHANCEDSTATUSCODES > 250-PIPELINING > 250-8BITMIME > 250-SIZE 10485760 > 250-ETRN > 250-AUTH DIGEST-MD5 CRAM-MD5 > 250-DELIVERBY > 250 HELP > MAIL FROM:<owner-dasfqeiuasd*Abrasf*-Gorpwe**UVM*-EDU(a)LIST.UVM.EDU> > 250 2.1.0 <owner-dasfqeiuasd*Abrasf*-Gorpwe**UVM*-EDU(a)LIST.UVM.EDU>... > Sender ok > RCPT TO:<ntssdfwe> > 552 5.2.2 User ntssdfwe mailbox is full At this point Dovecot should return the failed RCPT TO: status back to sendmail over LMTP, but instead it sits there (waiting for a timeout to expire?) and eventually dies. doveconf -n output: # 2.0.18: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-220.4.2.el6.x86_64 x86_64 Red Hat Enterprise Linux Server release 6.2 (Santiago) base_dir = /var/run/dovecot/ default_client_limit = 6000 default_process_limit = 10240 director_mail_servers = penguina.uvm.edu penguinb.uvm.edu penguinc.uvm.edu penguind.uvm.edu director_servers = imapdir1.uvm.edu imapdir2.uvm.edu lmtp_proxy = yes login_trusted_networks = [REDACTED] passdb { args = proxy=y nopassword=y protocol=smtp driver = static } service anvil { client_limit = 40000 } service auth { client_limit = 45960 unix_listener auth-userdb { group = mail mode = 0660 user = dovecot } } service director { fifo_listener login/proxy-notify { mode = 0666 } inet_listener { port = 9090 } unix_listener director-userdb { mode = 0600 } unix_listener login/director { mode = 0666 } } service imap-login { executable = imap-login director service_count = 0 } service imap { process_limit = 10240 vsz_limit = 1 G } service lmtp { client_limit = 1 inet_listener lmtp { port = 24 } unix_listener /var/lib/dovecot/lmtp-socket { group = root mode = 0600 user = root } } service pop3-login { executable = pop3-login director service_count = 0 } service pop3 { process_limit = 5000 } shutdown_clients = no ssl_cert = <[REDACTED].pem ssl_key = <[REDACTED].key userdb { driver = passwd } verbose_proctitle = yes version_ignore = yes protocol lmtp { auth_socket_path = director-userdb } protocol imap { mail_max_userip_connections = 100 } Hope you can help, Jim Lawson

2 6

[Dovecot] v2.0.19 released
by Timo Sirainen 15 Mar '12

15 Mar '12

http://dovecot.org/releases/2.0/dovecot-2.0.19.tar.gz http://dovecot.org/releases/2.0/dovecot-2.0.19.tar.gz.sig Hopefully one of the last v2.0.x releases. - IMAP: ENABLE CONDSTORE/QRESYNC + STATUS for a mailbox might not have seen latest external changes to it, like new mails. - imap_id_* settings were ignored before login. - doveadm altmove did too much work sometimes, retrying moves it had already done. - mbox: Fixed accessing Dovecot v1.x mbox index files without errors.

1 0

[Dovecot] sieve.before script is taking preceedence over user defined rules
by Alexis Lelion 15 Mar '12

15 Mar '12

Hello, In my current setup, I have a spam filter upstream that adds a specific header - X-Spam-Level on every incoming mail. Based on this level, the mail will be moved to the user spam folder using sieve by doing "fileinto :create 'spam';" Unfortunately, some legitimate email may end up in this spam folder, so I have kind of a whitelist that performs an explicit keep over specific trusted domains. So, my complete spam filtering rule is : if address :domain :contains "From" ["mycompany.tld", "trusted.tld" ]{ keep; elseif header :contains "X-Spam-Level" ["0","1","2"] { fileinto :create "__spam__"; } This rule is stored in "/var/lib/dovecot/sieve/before.sieve", which is my "sieve_before" file as defined in /etc/dovecot/conf.d/90-sieve.conf This works as expected except that it doesn't take into account users filtering for domains that were matched for the explicit keep. For example, I have the following rule : if address :domain "From" "trusted.tld" { fileinto "trusted" } But mail coming from that domain are still delivered in my mailbox. Is there something I'm missing here? I guess yes, otherwise it would work as I want ^_^ Any help/comment is appreciated Thanks! Alexis

2 4

Re: [Dovecot] doveadm -A stops processing at first uid<first_valid_uid
by Joseph Tam 15 Mar '12

15 Mar '12

On Sun, 4 Mar 2012, Timo Sirainen writes: > > I would like to run various doveadm commands that involves all (mail) users like > > > > doveadm expunge -A mailbox Trash savedbefore 30d > > > > but any doveadm command that uses "-A" to iterate through all users will > > stop processing at the first account with UID<first_valid_uid. > > What userdb are you using? userdb passwd should already skip users that > aren't in the valid range. And what Dovecot version are you using? passwd-file under dovecot 2.0.16. > And one more thing: Does it really even stop there? Looking at the code > it's supposed to log an error and continue to next user. Note that it says > "Failed to iterate through SOME users". The wording did not escape my notice, which is why I suspect it's not doing what it was designed to do. This is my test: # Command doveadm mailbox list -A # Start of password file sysdaemon:*:500:500:System daemon:/:/dev/null ... and the rest ... # dovecot.conf ... first_valid_uid = 10000 first_valid_gid = 10000 ... In this situation, doveadm will exit immediately with an UID error message. If I change the UID>10000, it will produce the analogous GID error message. If I satify both UID and GID constraints, it will fail on the next daemon entry. If I move the sysdaemon entry all the way to the bottom of the pasword file, I get user1 saved-messages user1 sent-mail user1 postponed-msgs user1 temp user1 temp/temp user1 INBOX user2 sent-mail user2 101 user2 345 user2 ckf ... all user's mailbox with UID>10000, then ... doveadm(sysdaemon): Error: user sysdaemon: Couldn't drop privileges: Mail access for users with UID 500 not permitted (see first_valid_uid in config file, uid from userdb lookup). doveadm(sysdaemon): Error: User init failed doveadm: Error: Failed to iterate through some users > Oh, it says about first_valid_gid. Is sysdaemon's UID within valid range? Sorry for this error mismatch -- I cut&pasted the wrong test output; however, the problem I witnessed applies to both UID and GID (if either constraint is not met, user iteration terminates). > I also added this today: http://hg.dovecot.org/dovecot-2.1/rev/85a8d582d37f It looks like I'll be upgrading. Oh, I just spotted this in the ChangeLog -- maybe you are undoing this? (2010-10-21) * src/auth/auth-settings.c, src/auth/auth-settings.h, src/auth/userdb- passwd.c: auth: userdb passwd iteration now lists only users within first_valid_uid..last_valid_uid range. [745ef289b0ea] Joseph Tam <jtam.home(a)gmail.com>

2 1

[Dovecot] Shared folder prefix listed multiple times with dovecot 2.1.1
by Markus Petri 15 Mar '12

15 Mar '12

Hi, after upgrading from 2.0.18 to 2.1.1 I noticed that I could not use shared folders with mutt anymore. 2.1 lists the shared namespace prefix once per user sharing an folder in LIST "" "%". I also noticed, that with 2.1 the user folder (Shared/<username>) is no longer tagged as \NoSelect. Is this the intended behaviour and mutt simply cannot cope with it or is it a dovecot problem? Here an example with three users sharing a folder to the logged in user with Dovecot 2.1.1: 2 LIST "" "*" * LIST (\HasNoChildren) "/" "INBOX" * LIST (\HasChildren) "/" "Shared/test" * LIST (\HasNoChildren) "/" "Shared/test/Share" * LIST (\HasChildren) "/" "Shared/test2" * LIST (\HasNoChildren) "/" "Shared/test2/Share2" * LIST (\HasChildren) "/" "Shared/test3" * LIST (\HasNoChildren) "/" "Shared/test3/Share3" 2 OK List completed. 2 LIST "" "%" * LIST (\HasNoChildren) "/" "INBOX" * LIST (\Noselect \HasChildren) "/" "Shared" * LIST (\Noselect \HasChildren) "/" "Shared" * LIST (\Noselect \HasChildren) "/" "Shared" 2 OK List completed. The same three users and config with Dovecot 2.0.18: 2 LIST "" "*" * LIST (\HasNoChildren) "/" "INBOX" * LIST (\Noselect \HasChildren) "/" "Shared/test" * LIST (\Noselect \HasChildren) "/" "Shared/test2" * LIST (\Noselect \HasChildren) "/" "Shared/test3" * LIST (\HasNoChildren) "/" "Shared/test/Share" * LIST (\HasNoChildren) "/" "Shared/test2/Share2" * LIST (\HasNoChildren) "/" "Shared/test3/Share3" 2 OK List completed. 2 LIST "" "%" * LIST (\HasNoChildren) "/" "INBOX" * LIST (\Noselect \HasChildren) "/" "Shared" 2 OK List completed. Markus # 2.1.1: /opt/dovecot-2.1/etc/dovecot/dovecot.conf # OS: Linux 3.2.0-1-amd64 x86_64 Debian wheezy/sid auth_mechanisms = plain login disable_plaintext_auth = no listen = 192.168.56.11 mail_location = maildir:~/Maildir mail_plugins = acl managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace { inbox = yes location = prefix = separator = / subscriptions = yes type = private } namespace { inbox = no list = children location = maildir:%%h/Maildir:INDEX=~/Maildir/index/shared/%%u prefix = Shared/%%u/ separator = / subscriptions = no type = shared } passdb { args = /opt/dovecot-2.1/etc/dovecot/passwd driver = passwd-file } plugin { acl = vfile acl_anyone = allow acl_shared_dict = file:/var/lib/vdovecot/shared-mailboxes.db } protocols = imap service auth { unix_listener auth-userdb { mode = 0600 user = vdovecot } } ssl = no userdb { args = /opt/dovecot-2.1/etc/dovecot/passwd driver = passwd-file } verbose_proctitle = yes protocol imap { mail_plugins = acl imap_acl }

2 3

Re: [Dovecot] Dovecot 2.1 with custom OpenSSL fails to build
by Andreas M. Kirchwitz 15 Mar '12

15 Mar '12

Timo Sirainen <tss(a)iki.fi> wrote: >> There seems to be a new dependency in some modules (eg, lib-storage, >> libdovecot-lda, libdovecot-ssl) on OpenSSL. In Dovecot 2.0, those >> modules didn't require OpenSSL, but 2.1 does. >> >> For the linking process the path to the OpenSSL library isn't >> specified properly (SSL_LIBS). Dovecot fails to build if OpenSSL >> is in a non-standard path. (Haven't checked if SSL_CFLAGS isn't >> properly used as well.) > > Maybe http://hg.dovecot.org/dovecot-2.1/rev/c07415305d9e fixes > everything? That's the way to go. Makes things better, but I've found three more dependencies. This patch is against the daily snapshot 20120228. (Sorry for the changes to Makefile.in which you won't need. But this way I don't have to rebuild Makefile.in from Makefile.am when compiling. ;-) diff -ur dovecot-20120228.original/src/auth/Makefile.am dovecot-20120228/src/auth/Makefile.am --- dovecot-20120228.original/src/auth/Makefile.am 2012-02-26 04:00:02.000000000 +0100 +++ dovecot-20120228/src/auth/Makefile.am 2012-02-29 01:38:41.000000000 +0100 @@ -167,7 +167,7 @@ libauthdb_imap_la_LIBADD = \ ../lib-imap-client/libimap_client.la \ ../lib-ssl-iostream/libssl_iostream.la \ - $(LIBDOVECOT) + $(LIBDOVECOT) $(SSL_LIBS) libauthdb_imap_la_CPPFLAGS = \ $(AM_CPPFLAGS) \ -I$(top_srcdir)/src/lib-imap \ diff -ur dovecot-20120228.original/src/auth/Makefile.in dovecot-20120228/src/auth/Makefile.in --- dovecot-20120228.original/src/auth/Makefile.in 2012-02-28 04:00:12.000000000 +0100 +++ dovecot-20120228/src/auth/Makefile.in 2012-02-29 01:38:44.000000000 +0100 @@ -499,7 +499,7 @@ libauthdb_imap_la_LIBADD = \ ../lib-imap-client/libimap_client.la \ ../lib-ssl-iostream/libssl_iostream.la \ - $(LIBDOVECOT) + $(LIBDOVECOT) $(SSL_LIBS) libauthdb_imap_la_CPPFLAGS = \ $(AM_CPPFLAGS) \ diff -ur dovecot-20120228.original/src/lib-storage/Makefile.am dovecot-20120228/src/lib-storage/Makefile.am --- dovecot-20120228.original/src/lib-storage/Makefile.am 2012-02-10 04:00:02.000000000 +0100 +++ dovecot-20120228/src/lib-storage/Makefile.am 2012-02-29 01:38:21.000000000 +0100 @@ -85,7 +85,7 @@ pkglib_LTLIBRARIES = libdovecot-storage.la libdovecot_storage_la_SOURCES = -libdovecot_storage_la_LIBADD = $(shlibs) $(MODULE_LIBS) +libdovecot_storage_la_LIBADD = $(shlibs) $(MODULE_LIBS) $(SSL_LIBS) libdovecot_storage_la_DEPENDENCIES = $(shlibs) libdovecot_storage_la_LDFLAGS = -export-dynamic diff -ur dovecot-20120228.original/src/lib-storage/Makefile.in dovecot-20120228/src/lib-storage/Makefile.in --- dovecot-20120228.original/src/lib-storage/Makefile.in 2012-02-28 04:00:15.000000000 +0100 +++ dovecot-20120228/src/lib-storage/Makefile.in 2012-02-29 01:38:21.000000000 +0100 @@ -397,7 +397,7 @@ pkglib_LTLIBRARIES = libdovecot-storage.la libdovecot_storage_la_SOURCES = -libdovecot_storage_la_LIBADD = $(shlibs) $(MODULE_LIBS) +libdovecot_storage_la_LIBADD = $(shlibs) $(MODULE_LIBS) $(SSL_LIBS) libdovecot_storage_la_DEPENDENCIES = $(shlibs) libdovecot_storage_la_LDFLAGS = -export-dynamic test_programs = \ diff -ur dovecot-20120228.original/src/login-common/Makefile.am dovecot-20120228/src/login-common/Makefile.am --- dovecot-20120228.original/src/login-common/Makefile.am 2011-11-09 04:00:01.000000000 +0100 +++ dovecot-20120228/src/login-common/Makefile.am 2012-02-29 01:38:21.000000000 +0100 @@ -40,6 +40,6 @@ pkglib_LTLIBRARIES = libdovecot-login.la libdovecot_login_la_SOURCES = -libdovecot_login_la_LIBADD = liblogin.la ../lib-ssl-iostream/libssl_iostream.la ../lib-dovecot/libdovecot.la +libdovecot_login_la_LIBADD = liblogin.la ../lib-ssl-iostream/libssl_iostream.la ../lib-dovecot/libdovecot.la $(SSL_LIBS) libdovecot_login_la_DEPENDENCIES = liblogin.la libdovecot_login_la_LDFLAGS = -export-dynamic diff -ur dovecot-20120228.original/src/login-common/Makefile.in dovecot-20120228/src/login-common/Makefile.in --- dovecot-20120228.original/src/login-common/Makefile.in 2012-02-28 04:00:18.000000000 +0100 +++ dovecot-20120228/src/login-common/Makefile.in 2012-02-29 01:38:21.000000000 +0100 @@ -320,7 +320,7 @@ pkginc_lib_HEADERS = $(headers) pkglib_LTLIBRARIES = libdovecot-login.la libdovecot_login_la_SOURCES = -libdovecot_login_la_LIBADD = liblogin.la ../lib-ssl-iostream/libssl_iostream.la ../lib-dovecot/libdovecot.la +libdovecot_login_la_LIBADD = liblogin.la ../lib-ssl-iostream/libssl_iostream.la ../lib-dovecot/libdovecot.la $(SSL_LIBS) libdovecot_login_la_DEPENDENCIES = liblogin.la libdovecot_login_la_LDFLAGS = -export-dynamic all: all-am

2 3

[Dovecot] .mailboxlist -> .subscriptions
by Steve Campbell 15 Mar '12

15 Mar '12

I've mostly finished a conversion from an old Centos 3 UW-Imap server to a new Centos 6 dovecot server. I did not copy the old ~/.mailboxlist file to ~/mail/.subscriptions file, but notice some users have the latter file now. These are all mbox folders on the old and new server. I'm getting ready to do the same to another old/new pair of servers and I'm wondering if there is an advantage of doing the copy. I'm assuming the .subscription files are created when they access their account through our webmail application, but I'm not sure if it was automatic or due to a "subscribe" action done manually. There are 49 accounts with a .mailboxlist file and only 4 with the new .subscriptions file. So either our webmail application isn't being used a lot or there's a problem with it due to the missing .subscriptions file, but the phone usually rings pretty quickly when problems arise. One last question, please. Over the years, some imap accounts had their folders directly in their home directory and the contents of the .mailboxlist file would have an entry with just the name of the folder in it (Trash, eg), and most had the folders in their ~/mail folder with an entry like "mail/Trash". Our webmail app, Horde/Imp, always seemed to take care of this. If I create the .subscription file for the users during the move to the new server, should I move the folders to the mail directory and amend their .subscriptions file to reflect that change on these odd ball accounts, and will that affect how their client is seeing these? The first server conversion was a bear due to my lack of dovecot knowledge. I've since learned a little more, and mostly found out that dovecot is a more complex application than the old imap application. There's so much more that can be done with dovecot, whereas the old imap server was mostly just load-and-go. Seems like no matter how much I read, the more I discovered I didn't know. Anyway, thanks for all the past help and any opinions anyone might decide to offer on this post. steve campbell

3 6

[Dovecot] 2.1: timeout waiting for lock?
by Ralf Hildebrandt 15 Mar '12

15 Mar '12

Mar 15 09:46:11 postamt dovecot: pop3(username): Error: Couldn't open INBOX: Timeout while waiting for lock Mar 15 09:46:11 postamt dovecot: pop3(username): Couldn't open INBOX top=0/0, retr=0/0, del=0/0, size=0 Mar 15 09:47:26 postamt dovecot: pop3(username): Error: Couldn't open INBOX: Timeout while waiting for lock Mar 15 09:47:26 postamt dovecot: pop3(username): Couldn't open INBOX top=0/0, retr=0/0, del=0/0, size=0 Mar 15 09:51:01 postamt dovecot: pop3(username): Error: Couldn't open INBOX: Timeout while waiting for lock Mar 15 09:51:01 postamt dovecot: pop3(username): Couldn't open INBOX top=0/0, retr=0/0, del=0/0, size=0 during that time, I wasn't able to access the mailbox using imap. I then issued doveadm kick username and all over sudden the mailbox was accessible (via IMAP) # doveadm kick username kicked connections from the following users: username # /usr/local/scripts/find_abnormal_imap Mar 15 11:38:48 postamt dovecot: imap: Warning: Killed with signal 15 (by pid=24545 uid=0 code=kill) -- Ralf Hildebrandt Geschäftsbereich IT | Abteilung Netzwerk Charité - Universitätsmedizin Berlin Campus Benjamin Franklin Hindenburgdamm 30 | D-12203 Berlin Tel. +49 30 450 570 155 | Fax: +49 30 450 570 962 ralf.hildebrandt(a)charite.de | http://www.charite.de

2 4

Re: [Dovecot] .mailboxlist -> .subscriptions
by Joseph Tam 15 Mar '12

15 Mar '12

Steve Campbell <campbell(a)cnpapers.com> writes: > Their imap folders, the ones that they create using an imap client or > webmail, are either in ~ or ~/mail. Their original .mailboxlist is > always in ~. Based on that, I should probably copy any imap folders not > in ~/mail to that folder, duplicate ~/.mailboxlist to the file > ~/mail/.subscriptions, and amend any .subscriptions file contents to > just have the name of the folders (without any "mail/folder" reference > in it). > > My example would then be as follows > > /home/steve = folder > /home/steve/Drafts = original folder > /home/steve/AnyFolder = original folder > /home/steve/.mailboxlist = original file > /home/steve/mail = folder (either original or created) > /home/steve/mail/.subscriptions = copied contents of .mailboxlist > file > /home/steve/mail/Drafts = copied folder of original > /home/steve/mail/AnyFolder = copied folder of original > > Contents of original .mailboxlist and new .subscriptions: > > Drafts > AnyFolder > > If the imap folders were in ~/mail, then the original .mailboxlist would > have been > > mail/Drafts > mail/AnyFolder > > but after the corrections to the .subscriptions file, they would be as > above (without reference to the mail folder). > > Is this correct? That depends -- are you aliasing namespaces so that prefix={"", "mail/", etc.} all map to a user's ~/mail folder? You may be creating a confusing situation where a client with a null IMAP prefix has 2 copies of a mailbox. Joseph Tam <jtam.home(a)gmail.com>

2 1

[Dovecot] firefox dovecot-sieve
by paul 15 Mar '12

15 Mar '12

Send this to dovecot(a)dovecot.org, not dovecot-owner(a)dovecot.org On 14.3.2012, at 4.45, paul wrote: > HI. I have just started to play with sieve and everything seems ok when > logging on using telnet localhost 4190 and an encoded username/password. > If I try to connect with firefox at localhost:4190 I get > "IMPLEMENTATION" "Dovecot Pigeonhole" > "SIEVE" "fileinto reject envelope encoded-character vacation subaddress > comparator-i;ascii-numeric relational regex imap4flags copy include > variables body enotify environment mailbox date ihave" > "NOTIFY" "mailto" > "SASL" "PLAIN LOGIN" > "STARTTLS" > "VERSION" "1.0" > OK "Dovecot ready." > NO "Error in MANAGESIEVE command received by server." > NO "Error in MANAGESIEVE command received by server." > NO "Invalid characters in atom" > BYE "Too many invalid MANAGESIEVE commands." > my dovecot -n shows > # 2.0.18: /etc/dovecot/dovecot.conf > # OS: Linux 2.6.42.9-1.fc15.i686.PAE i686 Fedora release 15 (Lovelock) > auth_mechanisms = plain login > disable_plaintext_auth = no > mail_location = mbox:~/mail:INBOX=/var/spool/mail/%u > mail_privileged_group = mail > managesieve_notify_capability = mailto > managesieve_sieve_capability = fileinto reject envelope > encoded-character vacation subaddress comparator-i;ascii-numeric > relational regex imap4flags copy include variables body enotify > environment mailbox date ihave > mbox_write_locks = fcntl > passdb { > driver = pam > } > plugin { > sieve = ~/.dovecot.sieve > sieve_dir = ~/sieve > } > protocols = imap pop3 lmtp sieve > service managesieve-login { > inet_listener sieve { > port = 4190 > } > } > ssl_cert = </etc/pki/dovecot/certs/dovecot.pem > ssl_key = </etc/pki/dovecot/private/dovecot.pem > userdb { > driver = passwd > } > Have I missed something obvious or does Firefox clash with Managesieve? > Thanks. Paul >

2 1

[Dovecot] Login Failed
by Aydın Demirel 15 Mar '12

15 Mar '12

Hi; We are using scripts for login successes. Is there a feature for login failed status or can it be developed? Regards -- *Aydın Demirel Endersys Ltd. Sistem Destek Mühendisi/ System Support Engineer* * *<<Endersys is the first Advanced Business Partner of Red Hat in Turkey! http://www.europe.redhat.com/partners/endersys/>> Phone : +90 216 470 9423 | GSM : +90 530 401 8203 Fax : +90 216 470 9508 | Web : http://www.endersys.com <http://www.endersys.com/> Blog : http://blog.endersys.com <http://blog.endersys.com/> Twitter : http://www.twitter.com/endersys LPI : The #1 Linux Certification for IT Professionals LPI (Linux Professional Institute) Turkey http://www.lpi-turkey.com <http://www.lpi-turkey.com/>

2 1

[Dovecot] FTS crash
by Joan Moreau 14 Mar '12

14 Mar '12

Hi Timo, I updated my 2.1 from HG, and now the FTS (Squat) plugin makes a segmentation fault. When I remove the plugin from the dovecot.conf, all works fine. No debug available here, but let me know how can I help you. Joan

2 2

[Dovecot] RECENT status always 0
by Arnaud Abélard 14 Mar '12

14 Mar '12

Hello, we are using dovecot 2.0.13 with maildir++ (we migrated away from courrier just a few months ago) and the RECENT status doesn't seem to be working: . STATUS INBOX (MESSAGES UNSEEN RECENT) * STATUS "INBOX" (MESSAGES 35106 RECENT 0 UNSEEN 10) then 2 minutes later: . STATUS INBOX (MESSAGES UNSEEN RECENT) * STATUS "INBOX" (MESSAGES 35106 RECENT 0 UNSEEN 11) How can the UNSEEN count change without the RECENT count changing accordingly? Thanks in advance, Arnaud -- Arnaud Abélard (jabber: arnaud.abelard(a)univ-nantes.fr) Administrateur Système - Responsable Services Web Direction des Systèmes d'Informations Université de Nantes - ne pas utiliser: trapemail(a)univ-nantes.fr

2 1

[Dovecot] Thunderbird Archive to slower storage - sort of alternate storage
by Marcio Merlone 14 Mar '12

14 Mar '12

Hi people, When a user archives a message from Thunderbird it moves to an IMAP folder "Archives", everyone knows that. I use dovecot 1:1.2.9-1ubuntu6.5 on Ubuntu 10.04 and want to move that folder (and respective IMAP sub-folders) to a slower storage, link it to original location and my first idea for this is find -type d -name .Archives\* -print0 | \ while read -d $'\0' archive; do \ mv "$archive" /dead/Emails/jhon.doe/; \ ln -s "/dead/Emails/jhon.doe/$archive" .; done It works, given that the files are not locked. I could restart dovecot before so it would unlock the files, but there is no guarantee it does not get locked again before the find finishes. I took a look on mailling list archives, but could not find something like that and was wondering what you guys use (if any) for such task and what are the recommendations, best practices, solutions for that? Thanks in advance, best regards. -- *Marcio Merlone*

2 5

Re: [Dovecot] \NoSelect on missing folders in LIST
by Peter Mogensen 14 Mar '12

14 Mar '12

On 2012-03-05 16:36, Timo Sirainen wrote: >> Still curious about if Courier is doing something wrong which the scripts just happened to take advantage of. > > Neither behavior is wrong, just different. :) Ok... I were in doubt if I had missed something from the RFC. However... for testing, I tried to create "INBOX.INBOX" on dovecot. But then dovecot answers NO and complains that the folder already exists. Though it's still not on disk and dovecot still doesn't list it with "*". /Peter

2 1

[Dovecot] No passdbs specified in configuration file with passdb/userdb in protocol sections
by btb＠bitrate.net 13 Mar '12

13 Mar '12

hi- i have a configuration in which i'm using different passdb/userdb settings for each of imap, lmtp and smtp [without getting too far off on a tangent, this is so ldap group membership can be used to independently control authorization for receiving [lmtp], retrieving [imap], and sending [smtp/postfix] of email. each passdb/userdb uses a different search filter.] when i use this as my config: # 2.0.13: /etc/dovecot/dovecot.conf # OS: Linux 3.0.0-15-generic-pae i686 Ubuntu 11.10 auth_debug = yes first_valid_gid = 2000 first_valid_uid = 2000 log_timestamp = "%d.%m.%Y %H.%M.%S " login_greeting = dovecot ready mail_debug = yes protocols = " imap lmtp" service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0666 user = postfix } } service lmtp { inet_listener lmtp { address = 127.0.0.1 ::1 port = 10026 } } ssl_cert = </etc/dovecot/pki/mra.example.com-cert.pem ssl_key = </etc/dovecot/pki/mra.example.com-key.pem verbose_proctitle = yes protocol imap { mail_max_userip_connections = 20 passdb { args = /etc/dovecot/dovecot-ldap-imap.conf.ext driver = ldap } userdb { driver = prefetch } userdb { args = /etc/dovecot/dovecot-ldap-imap.conf.ext driver = ldap } } protocol lmtp { userdb { args = /etc/dovecot/dovecot-ldap-lmtp.conf.ext driver = ldap } } protocol smtp { passdb { args = /etc/dovecot/dovecot-ldap-smsp.conf.ext driver = ldap } } dovecot complains: dovecot: auth: Fatal: No passdbs specified in configuration file. PLAIN mechanism needs one which is a little confusing, since there are multiple passdbs specified, in the various protocol sections. i found that adding another "global" passdb to the config allows dovecot to work - e.g.: # 2.0.13: /etc/dovecot/dovecot.conf # OS: Linux 3.0.0-15-generic-pae i686 Ubuntu 11.10 auth_debug = yes first_valid_gid = 2000 first_valid_uid = 2000 log_timestamp = "%d.%m.%Y %H.%M.%S " login_greeting = dovecot ready mail_debug = yes passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } protocols = " imap lmtp" service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0666 user = postfix } } service lmtp { inet_listener lmtp { address = 127.0.0.1 ::1 port = 10026 } } ssl_cert = </etc/dovecot/pki/mra.example.com-cert.pem ssl_key = </etc/dovecot/pki/mra.example.com-key.pem verbose_proctitle = yes protocol imap { mail_max_userip_connections = 20 passdb { args = /etc/dovecot/dovecot-ldap-imap.conf.ext driver = ldap } userdb { driver = prefetch } userdb { args = /etc/dovecot/dovecot-ldap-imap.conf.ext driver = ldap } } protocol lmtp { userdb { args = /etc/dovecot/dovecot-ldap-lmtp.conf.ext driver = ldap } } protocol smtp { passdb { args = /etc/dovecot/dovecot-ldap-smsp.conf.ext driver = ldap } } the problem with this is that while each of the passdb/userdb configs for the various protocols does indeed work, if a result is not found in one of them, the global passdb appears to then function as a catch-all. how can i tell dovecot it doesn't need a global passdb? each of the protocols' passdb/userdb configs is functioning as desired, but having dovecot look elsewhere upon failure ends up defeating the purpose. thanks -ben

2 2

[Dovecot] invalid mailbox name
by Vincent Schut 13 Mar '12

13 Mar '12

Hi, while migrating all mail from our old to our new server (using offlineimap, imap -> imap), I get the following error for one of my user's mailboxes: ERROR: Folder 'Organisations.RS Env & IJRS'[local_hoekman] could not be created. Server responded: ('NO', ['Invalid mailbox name: Organisations.RS Env & IJRS']) I suppose this is because of the ampersand in the mailbox name? Because other folder with spaces in it go just fine... Is this a fixed thing? Why was my user able to create the folder once? And why is dovecot 1.2.15 refusing to create the folder now? Migration is from dovecot 1.1.11 to 1.2.15. Thanks, Vincent.

2 5

[Dovecot] upgrade convert omissions
by Nick Edwards 13 Mar '12

13 Mar '12

It did not convert over some things: protocol imap { listen = *:143 mail_plugins = quota imap_quota imap_client_workarounds = outlook-idle ssl_listen = *:993 } protocol pop3 { pop3_uidl_format = %f mail_plugins = quota pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } protocol lda { mail_plugins = quota cmusieve quota_full_tempfail = no log_path = /var/log/dovecot/deliver.log deliver_log_format = msgid=%m: from=%f: %$ auth_socket_path = /var/run/dovecot/auth-master } I ended up with service imap-login { inet_listener imap { address = * port = 143 } inet_listener imaps { address = * port = 993 } process_limit = 1024 service_count = 1 } service imap { process_limit = 1024 } service pop3-login { process_limit = 1024 service_count = 1 } service pop3 { process_limit = 1024 } It looks like service-foobar is replacing stuff inside protocol {} but protocol still exists in examples, kind of confusing. Oh what about service-pop3, different than examples and service-imap, where's pop3s ? I guess I'll just copy the service pop3 section from an example file. Does all this mean the protocol section is not needed? or everything inside of them I had is no longer valid? No LDA specific logging converted, it did not include the quota stuff in where it is needed (mail_plugins went MIA), but did inside converted plugin section. I did note the conversion warned that workarounds = outlook-idle is no longer needed, but nothing about the other stuff. Just concerns me if it ignored some needed stuff, what else did it ignore. Nik (who is rather reluctant to use series 2 and break everything and stay with 1.2) Below is the new conf file: auth_cache_negative_ttl = 0 auth_cache_ttl = 5 mins auth_mechanisms = plain login auth_verbose = yes disable_plaintext_auth = no first_valid_uid = 95 last_valid_uid = 95 listen = *,:: log_path = /var/log/dovecot/pop3.log login_log_format_elements = user=<%u> method=%m rip=%r %c mail_location = maildir:/vmail/%d/%n/Maildir mail_nfs_index = yes mail_nfs_storage = yes maildir_very_dirty_syncs = yes mmap_disable = yes passdb { args = /etc/dovecot-sql.conf driver = sql } plugin { quota = maildir quota_rule = *:storage=1000M quota_rule2 = Trash:storage=100M quota_rule3 = Junk:ignore quota_rule4 = Spam:ignore quota_warning = storage=90%% /usr/local/bin/quotawarn-90.sh quota_warning2 = storage=75%% /usr/local/bin/quotawarn-75.sh } pop3_lock_session = yes protocols = imap pop3 service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-master { mode = 0600 user = vmail } user = vmail } service imap-login { inet_listener imap { address = * port = 143 } inet_listener imaps { address = * port = 993 } process_limit = 1024 service_count = 1 } service imap { process_limit = 1024 } service pop3-login { process_limit = 1024 service_count = 1 } service pop3 { process_limit = 1024 } shutdown_clients = no ssl_cert = </etc/ssl/certs/mail.crt ssl_key = </etc/ssl/certs/mail.key userdb { args = /etc/dovecot-sql.conf driver = sql }

2 2

[Dovecot] Trouble adding sasl support via dovecot
by Richard Troy 12 Mar '12

12 Mar '12

Hello Folks, I've been the admin of a site that uses Postfix with Dovecot on RedHat since, oh, gosh, maybe 1996? It's been a long time. I've never built it from source, though, just used the rpms (and I wonder if maybe that's my problem now). It just works, is reliable, and lets me be a very-part-time administrator. Repeatedly over the last few years I've been asked to have our mail system "join the modern age" and provide mail sending capabilities for clients that aren't on our internal network - via their smart-phones, from home, etc. OK... Well, way back when the site was set up, smtp servers didn't do any kind of "auth", but along the way to solving this problem (trying to configure pop-before-smtp, someone mentioned that Postfix now has an auth mechanism that uses Dovecot and I should use that instead! Great! ... Except that I've spent between 16 and 20 hours on this with no joy, and while I hate having to ask for help, it's time to ask what things that are obvious to the less ignorant that I must be doing wrong... Certainly, given the solid history of Postfix and Dovecot, I must be the problem! My problem statement is simply, "it should be working", but doesn't, and I don't get any announcement of "auth" when testing connections to Postfix as per directions here: http://www.postfix.org/SASL_README.html#server_test At least I haven't broken the normal functionality! I'm building a new server on the latest Fedora Core (16), but it's lacking in some hardware and won't be ready for a while, so I'm working with FC 14, running Postfix 2.5.6, and Dovecot 1.2.8. It uses the "cram-md5" auth scheme (which works fine and I'd hate to change it if I don't have to). The system has been up and functional on these versions for a couple of years, and quite stable, we just can't send if we're not local. When I do "postconf-a" it indicates cyrus and dovecot, so I take it that means Postfix has been built with sasl support. (I presume this means I don't have to compile it from source.) First Dovecot. Its set up to provide all protocols, but only imaps and pop3s have ports forwarded through the firewall. Plain-text auth is disabled, ssl is set to yes, ssl_listen is not specified, and the cert and key files are in the default locations - and work. No cipher list is used. Dovecot's chrooted. The protocol sections imap and pop3 take ALL the defaults, as does lda (I've ignored sendmail_path = /usr/lib/sendmail) as I don't think it matters. "auth default {" has mechanisms set to cram-md5, digest-md5, plain, and login, with passdb passwd-file pointing to a file in /etc where the cram data goes. It's not using pam, and there's an OLD comment in the config: # Experience says we need an empty passdb - passwd group: which is followed by passdb passwd{}. Later, there's "userdb passwd {}. All of that was configured long ago and has been functional. The changes I've made to add sasl support primarily pertain to the "socket listen section of "auth default". There, the master section remains commented out while the client section has been uncommented, the path set to /var/spool/postfix/private/auth, mode set to 0660, and the user and group have been set to postfix. ...This is all as described here: http://www.postfix.org/SASL_README.html and http://wiki.dovecot.org/HowTo/PostfixAndDovecotSASL That's it for Dovecot. Now, to Postfix itself. >From the working environ, only listening on port 25, I simply added the following (as per directions already cited above): smtpd_sasl_type = dovecot smtpd_sasl_path = private/auth smtpd_sasl_auth_enable = yes broken_sasl_auth_clients = yes smtpd_sasl_security_options = noanonymous, noplaintext smtp_sasl_security_options = noanonymous, noplaintext smtpd_sasl_tls_security_options = noanonymous smtp_sasl_tls_security_options = noanonymous And, of course, permit_sasl_authenticated was added to smtpd_recipient_restrictions. I got the impression from the baove sources that Postfix will then use Dovecot's authentication mechanism via a socket it finds in its private/auth subdirectory. NOT documented in any of those places, someone suggested I must turn on TLS. OK... The documentation found here: http://www.postfix.org/TLS_README.html claims (intimates) that it's not possible to run a site on a self-signed certificate, however, there's ZERO budget for a signed certificate, so unless I can get one for ten bucks somewhere, that could be a deal-breaker here. However, we've been using self-signed certificates for a while now and wonder why an "exception" mechanism wouldn't exist. As that web page talks about "Netscape" I suspect it's very old and may no longer apply. In any event, I tried this, too (after trying without). On the good side, an available Android phone, previously reading fine, but unable to send, no longer complained when the setup was changed to the imap username and password, same server address, TLS security type, and the server port of 25. HOWEVER, no mail has passed through it successfully, it just gives no error whatsoever, so far, while the server's log reports "Relay access denied." Notably, when setting up TLS, Postfix complained when the smtpd_tls_key_file was incorrect, but did not complain when it was provided properly, suggesting it's reading and accepting my self-signed certificate and private key. Ideas, please?! And, by the way, what's port 465 all about? Some clients propose that's what should be used to send... Thanks in advance for your help, Richard

2 2