- dovecot - dovecot.org

Doveadm backup...
by Stephane Magnier 28 Mar '22

28 Mar '22

Hi I've recently tried to use the Dovecadm backup to backup the emails.. with the following syntax doveadm -Dv backup -u userx maildir:/mnt/nfs-backup/userx Sounds to be OK with few emails... Some of them got a lot of emails and one f them got an error and stop ! dsync(userx): Debug: brain S: Import Trash: Import change type=expunge GUID=1725fa475d774ee19cb98dfb6737b4f1 UID=24891 hdr_hash= result=GUIDs match dsync(userx): Debug: brain S: Import Trash: Import change type=expunge GUID=916ed110b4b1522868be6194f1ae36ff UID=24892 hdr_hash= result=GUIDs match dsync(userx): Debug: brain S: Import Trash: Import change type=expunge GUID=eb8d75c530a7b02fc26b494d9006c91b UID=24893 hdr_hash= result=GUIDs match dsync(userx): Debug: brain S: Import Trash: Import change type=expunge GUID=aee9155875c34861fd6500f1f2f51a26 UID=24894 hdr_hash= result=GUIDs match dsync(userx): Debug: brain S: Import Trash: Last common UID=24894. Delayed expunges= dsync(userx): Debug: brain S: Import Trash: Saved UIDs: dsync(userx): Debug: brain S: Import Trash: Finish update: min_next_uid=24895 min_first_recent_uid=24895 min_highest_modseq=35344 min_highest_pvt_modseq=0 dsync(userx): Debug: /mnt/nfs-backup/userx/.Trash/dovecot.index.cache: Compressed, file_seq changed 1645803588 -> 1645803589, size=32, max_uid=24894 dsync(userx): Warning: Mailbox changes caused a desync. You may want to run dsync again: Remote lost mailbox GUID 7e05c335174bf1608f0a02004eac7fb4 (maybe it was just deleted?) dsync(userx): Debug: auth-master: conn unix:/run/dovecot/auth-userdb: Disconnected: Connection closed (fd=10) I empty the trash... exactly the same problem... Any idea why this ?? Thanks and regards,

5 10

Private \seen flags lost during message move for other users
by Cube . 28 Mar '22

28 Mar '22

Hello, I have a shared mailbox set up with a private index: maildir:/var/mail/public:INDEXPVT=~/Maildir/public Per user \Seen flags are working fine until one user moves a message into another folder/sub-mailbox. For that user doing the move the message remains \Seen however for other users who have already seen the message the flag is lost and it appears unread in the new location. If the message is moved back it still appears unread to the other user even if had been read in that folder/sub-mailbox in the past. Is there anyway to retain per user \Seen that follows the message when its moved? Thank you.

2 1

dovecot replication on dovecot v 2.3.8
by Stephane Magnier 27 Mar '22

27 Mar '22

Hi, I am trying using a replication. Here is my config : 10-mail.conf. Before going " on real life " I try to make a very basic example... but without any success :-( bad start I took the config example on dovecot wiki The idea is to replicate the user: "user1" on a different server IP 177.28.1.120 at the location /home/SERVER/test and to get at the end the folder "/home/SERVER/test/user1" On the top, I wish to replication with the user / group : vmail. For the transfer, I use the root login on the backup server to avoid other rights problems at the moment 2) how to synchronized specific users ? apparently it's trying to sync other things.. :-) # mbox_very_dirty_syncs = yes mail_plugins=$mail_plugins quota notify replication service replicator { process_min_avail = 1 } dsync_remote_cmd = ssh -l root 177.28.1.120 doveadm dsync-server -u user1 plugin { mail_replica =remote:root@177.28.1.120:/home/SERVER/test/ } service aggregator { fifo_listener replication-notify-fifo { user = vmail } unix_listener replication-notify { user = vmail } } service replicator { unix_listener replicator-doveadm { mode = 0600 user = vmail } } replication_max_conns = 10 But apparently nothing is happening.... [root@xxx xenia]# doveadm replicator status Queued 'sync' requests 0 Queued 'high' requests 0 Queued 'low' requests 0 Queued 'failed' requests 0 Queued 'full resync' requests 24 Waiting 'failed' requests 10 Total number of known users 34 and the folder test is empty Any idea what is wrong ? maybe I should ask a start a cmd line to start the process ? ( [root@mbox1 xenia]# doveadm replicator status '*' username priority fast sync full sync success sync failed rngd none - - - - *user1 none 00:00:04 00:40:05 - y ( failed )* saslauth none - - - - sa-milt none - - - -

1 1

disable authentication for a user in specialuserdb passwd-file
by Marc 27 Mar '22

27 Mar '22

Is it possible to disable the authentication for a specific user in userdb password-file?

1 0

log failed plaintext password for specific user only
by mj 25 Mar '22

25 Mar '22

Hi, We are logging failed authentication attempts, with the attempted password as auth_verbose_passwords=sha1 The question: is it possible to configure auth_verbose_passwords=plain for a specific user only? Turning it on globally would be too much sensitive information for the purpose. Reason: We are currently observing a high number of failed authentications for a specific user, coming from *many* diffirent IPs across the globe, with most IPs only trying once or twice, making this difficult to block. The number of failed authentications cause this account to regularly become blocked in AD. We would like to know if they are trying older actual passwords from the user, or if it's just dictionary attack. Thanks!

4 7

Setting imap-login process_limit when service_count>1
by Joseph Tam 25 Mar '22

25 Mar '22

More of my users are accessing mail remotely, which probably explained why I started seeing Mar 18 05:50:34 dovecot: master: Warning: service(imap-login): process_limit (2) reached, client connections are being dropped I played around with increasing limits, but made the mistake of setting service_count to a value other than 0 and 1. service imap-login { client_limit = 1024 service_count = 10240 process_min_avail = 2 process_limit = 8 } Doubling and redoubling process_limit and increasing service_count didn't prevent IMAP from eventually grinding to a halt because process_limit was reached. Mar 18 12:36:12 dovecot: master: Warning: service(imap-login): process_limit (4) reached, client connections are being dropped Mar 18 20:39:48 viol dovecot: master: Warning: service(imap-login): process_limit (8) reached, client connections are being dropped Observing the way imap-login processes spawn and retain file descriptors, I finally understood the subtlety of [1], which explains that imap-login will not exit despite reaching service_count if one SSL connection is still open. With many long-lived client connections, the asymptotic behaviour is that the total #clients plateaus, but get spread out over many imap-login processes, with many lingering on to hold a few SSL connections. For service_count>1, process_limit should be set to a large fraction of peak simultaneous clients (i.e. the same value used when service_count=1), otherwise there is a high likelihood of running into process_limit and game over. Given this behaviour, there doesn't seem much sense in setting service_count to anything but 0 (unlimited => performance mode) or 1 (security mode). Setting to other values supposedly limit memory leaks, but if a single persistent SSL client can hold up an imap-login process from exiting and releasing memory, it seems to negate this purpose. Anyways, maybe [1] can mention this so others don't fall into the same pit I did. References [1] https://doc.dovecot.org/admin_manual/login_processes/ Joseph Tam <jtam.home(a)gmail.com>

1 0

ok replication does not work
by Paul Kudla (SCOM.CA Internet) 24 Mar '22

24 Mar '22

would someone please send me the standard that you are working towards (rfc stuff) in the mean time a bad email or folder or both are simply causing replication not to work no there is no logging of any kind of an error i would appreciate the info as i will start ripping down the c code to fix this doveadm / replication (seems to be seperate ???) remote , tcp tcps nothing works your co operation on this matter would be appreciated i dumped the 5 accounts listed below started from scratch and it just simply DOES NOT WORK all account replicate except for # sync.status Queued 'sync' requests 0 Queued 'high' requests 5 Queued 'low' requests 0 Queued 'failed' requests 0 Queued 'full resync' requests 0 Waiting 'failed' requests 0 Total number of known users 255 username type status paul(a)scom.ca incremental Waiting for dsync to finish nick(a)elirpa.com incremental Waiting for dsync to finish keith(a)elirpa.com incremental Waiting for dsync to finish ed.hanna(a)dssmgmt.com incremental Waiting for dsync to finish ed(a)scom.ca incremental Waiting for dsync to finish always the same five accounts and always they choke without any info i am forced to do a sync every five minutes (ten minute intevals) to keep the servers in sync. someone please give me a standard to work with otherwise the hacks that i do will be exactly that a hack???

2 1

Pop3 Panic Error
by Aurel Mihai 24 Mar '22

24 Mar '22

Hello, after upgrade to version 2.3.18, we enconter a lot of errors, such as: Mar 22 14:08:32 mail2 dovecot: pop3(user@domain)<52269><3y3GeM3aQ+tWadtM>: Panic: file lib-event.c: line 585 (event_reason_code_prefix): assertion failed: (name[0] != '\0') Mar 22 14:08:32 mail2 dovecot: pop3(user@domain)<52269><3y3GeM3aQ+tWadtM>: Error: Raw backtrace: /usr/lib/dovecot/libdovecot.so.0(backtrace_append+0x42) [0x7f7ce322e012] -> /usr/lib/dovecot/libdovecot.so.0(backtrace_get+0x1e) [0x7f7ce322e12e] -> /usr/lib/dovecot/libdovecot.so.0(+0x101d4b) [0x7f7ce323ad4b] -> /usr/lib/dovecot/libdovecot.so.0(+0x101de1) [0x7f7ce323ade1] -> /usr/lib/dovecot/libdovecot.so.0(+0x55519) [0x7f7ce318e519] -> /usr/lib/dovecot/libdovecot.so.0(+0x594e2) [0x7f7ce31924e2] -> dovecot/pop3(client_handle_input+0x1c9) [0x55d5b5efa539] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_call_io+0x69) [0x7f7ce3250f79] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0x96) [0x7f7ce3251066] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_run+0x40) [0x7f7ce32511e0] -> /usr/lib/dovecot/libdovecot.so.0(master_service_run+0x13) [0x7f7ce31c4003] -> dovecot/pop3(main+0x2e6) [0x55d5b5ef81f6] -> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xea) [0x7f7ce2f93d0a] -> dovecot/pop3(_start+0x2a) [0x55d5b5ef838a] Mar 22 14:08:32 mail2 dovecot: pop3(user@domain)<52269><3y3GeM3aQ+tWadtM>: Fatal: master: service(pop3): child 52269 killed with signal 6 (core dumps disabled - https://dovecot.org/bugreport.html#coredumps) # dovecot -n # 2.3.18 (9dd8408c18): /etc/dovecot/dovecot.conf # Pigeonhole version 0.5.18 (0bc28b32) # OS: Linux 5.10.0-12-amd64 x86_64 Debian 11.2 # Hostname: auth_cache_verify_password_with_worker = yes auth_failure_delay = 5 secs auth_mechanisms = plain login auth_verbose = yes auth_worker_max_count = 256 default_client_limit = 10000 default_process_limit = 10000 default_vsz_limit = 1 G dict { lastlogin = mysql:/etc/dovecot/mysql/dovecot-dict-lastlogin.conf quotadict = mysql:/etc/dovecot/mysql/dovecot-dict-quota.conf } disable_plaintext_auth = no first_valid_uid = 100 imap_hibernate_timeout = 5 secs imap_idle_notify_interval = 3 mins log_timestamp = "%Y-%m-%d %H:%M:%S " login_log_format_elements = user=<%u> method=%m rip=%r lip=%l pid=%p %c login_trusted_networks = mail_fsync = always mail_gid = 8 mail_home = /home/virtual0/%d/%n mail_location = maildir:~/Maildir mail_nfs_index = yes mail_nfs_storage = yes mail_plugins = zlib quota mail_log notify mail_privileged_group = mail mail_uid = 150 maildir_stat_dirs = yes managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave metric imap_command { filter = event=imap_command_finished AND tagged_reply_state=OK group_by = cmd_name } metric imap_select_no { filter = event=imap_command_finished AND cmd_name=SELECT AND tagged_reply_state=NO } metric imap_select_no_notfound { filter = event=imap_command_finished AND cmd_name=SELECT AND tagged_reply="NO*Mailbox doesn't exist:*" } metric storage_http_gets { filter = event=http_request_finished AND category=storage AND method=get } mmap_disable = yes namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { auto = subscribe special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Spam { auto = subscribe autoexpunge = 30 days special_use = \Junk } mailbox Trash { auto = subscribe autoexpunge = 60 days special_use = \Trash } mailbox virtual/All { special_use = \All } prefix = } passdb { args = /etc/dovecot/mysql/dovecot-sql.conf driver = sql } plugin { last_login_dict = proxy::lastlogin last_login_key = # hidden, use -P to show it mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename mail_log_fields = uid box msgid size quota = dict:user::proxy::quotadict quota_rule2 = Trash:ignore quota_rule3 = Spam:ignore quota_status_nouser = DUNNO quota_status_overquota = 552 5.2.2 The email account that you tried to reach is over quota quota_status_success = DUNNO quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=80%% quota-warning 80 %u sieve = ~/.dovecot.sieve sieve_before = /etc/dovecot/sieve/default.sieve sieve_dir = ~/sieve trash = /etc/dovecot/dovecot-trash.conf zlib_save = gz zlib_save_level = 6 } protocols = imap sieve pop3 lmtp service anvil { client_limit = 50000 unix_listener anvil-auth-penalty { mode = 00 } } service auth { client_limit = 50000 unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-master { group = mail mode = 0660 user = vmail } user = root vsz_limit = 1 G } service dict { unix_listener dict { mode = 0660 user = vmail } } service imap-hibernate { unix_listener imap-hibernate { group = $default_internal_group mode = 0660 } } service imap-login { inet_listener imap { address = * port = 143 } inet_listener imaps { address = * port = 993 } process_min_avail = 16 service_count = 1 } service imap { extra_groups = $default_internal_group process_min_avail = 16 unix_listener imap-master { user = $default_internal_user } vsz_limit = 2 G } service lmtp { process_min_avail = 16 unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0600 user = postfix } vsz_limit = 1 G } service managesieve-login { inet_listener sieve { port = 4190 } process_min_avail = 16 service_count = 1 } service managesieve { vsz_limit = 1 G } service pop3-login { inet_listener pop3 { address = * port = 110 } inet_listener pop3s { address = * port = 995 } process_min_avail = 16 service_count = 1 } service pop3 { process_min_avail = 16 vsz_limit = 1 G } service quota-status { executable = /usr/lib/dovecot/quota-status -p postfix process_min_avail = 16 unix_listener /var/spool/postfix/private/quota-status { group = postfix mode = 0666 user = postfix } } service quota-warning { executable = script /usr/local/bin/quota-warning.sh unix_listener quota-warning { mode = 0660 user = vmail } user = vmail } service stats { unix_listener stats-reader { mode = 0660 user = vmail } unix_listener stats-writer { mode = 0666 user = vmail } } ssl_cert = </etc/dovecot/ssl/domain.pem ssl_dh = # hidden, use -P to show it ssl_key = # hidden, use -P to show it ssl_min_protocol = TLSv1 userdb { args = /etc/dovecot/mysql/dovecot-sql.conf driver = sql } protocol imap { imap_max_line_length = 64 k mail_max_userip_connections = 16 mail_plugins = zlib quota mail_log notify trash imap_quota last_login } protocol pop3 { mail_max_userip_connections = 10 mail_plugins = zlib quota mail_log notify last_login pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_fast_size_lookups = yes pop3_no_flag_updates = yes pop3_uidl_format = %08Xu%08Xv } protocol sieve { mail_max_userip_connections = 10 managesieve_max_compile_errors = 5 } protocol lda { auth_socket_path = /var/run/dovecot/auth-master mail_plugins = zlib quota mail_log notify sieve sendmail_path = /usr/lib/sendmail syslog_facility = mail } protocol lmtp { mail_plugins = zlib quota mail_log notify sieve syslog_facility = mail } Any help please? Aurel

2 2

imap_metadata plugin panic
by Elisamuel Resto 23 Mar '22

23 Mar '22

Hello, This may be covered somewhere but recently I enabled the metadata plugin to work with sieve as part of some updates I did a while back and I hadn't checked my logs for any issues with it and so far they're not completely taking my system down. Right now, upon trying to delete a folder I noticed the following in my logs... what am I missing? I see the broken SQL query, but I don't know enough about the dict system or the metadata plugin to know how to add the missing information or fix it otherwise. Regards, Elisamuel Resto Nov 15 12:19:19 wyvern dovecot[461]: dict(51438): Panic: lib-sql: Too many bind args (2) for statement: SELECT meta_key FROM metadata WHERE meta_key LIKE AND username = ? Nov 15 12:19:19 wyvern dovecot[461]: dict(51438): Error: Raw backtrace: /usr/lib/dovecot/libdovecot.so.0(backtrace_append+0x43) [0x7f449789d073] -> /usr/lib/dovecot/libdovecot.so.0(backtrace_get+0x20) [0x7f449789d190] -> /usr/lib/dovecot/libdovecot.so.0(+0xfaf1f) [0x7f44978a9f1f] -> /usr/lib/dovecot/libdovecot.so.0(+0xfafb1) [0x7f44978a9fb1] -> /usr/lib/dovecot/libdovecot.so.0(+0x4cd20) [0x7f44977fbd20] -> dovecot/dict [0 clients, 0 lookups:0/0/0/0, 0 iters:0/0/0/0, 0 commits:0/0/0/0](+0x875a) [0x555e60d7775a] -> dovecot/dict [0 clients, 0 lookups:0/0/0/0, 0 iters:0/0/0/0, 0 commits:0/0/0/0](sql_statement_query+0x42) [0x555e60d7f262] -> dovecot/dict [0 clients, 0 lookups:0/0/0/0, 0 iters:0/0/0/0, 0 commits:0/0/0/0](+0xd97f) [0x555e60d7c97f] -> /usr/lib/dovecot/libdovecot.so.0(dict_iterate_values+0x25) [0x7f4497868615] -> dovecot/dict [0 clients, 0 lookups:0/0/0/0, 0 iters:0/0/0/0, 0 commits:0/0/0/0](+0xa929) [0x555e60d79929] -> dovecot/dict [0 clients, 0 lookups:0/0/0/0, 0 iters:0/0/0/0, 0 commits:0/0/0/0](+0xb224) [0x555e60d7a224] -> dovecot/dict [0 clients, 0 lookups:0/0/0/0, 0 iters:0/0/0/0, 0 commits:0/0/0/0](+0xb381) [0x555e60d7a381] -> dovecot/dict [0 clients, 0 lookups:0/0/0/0, 0 iters:0/0/0/0, 0 commits:0/0/0/0](dict_command_input+0xd9) [0x555e60d7a579] -> dovecot/dict [0 clients, 0 lookups:0/0/0/0, 0 iters:0/0/0/0, 0 commits:0/0/0/0](+0x95b8) [0x555e60d785b8] -> /usr/lib/dovecot/libdovecot.so.0(connection_input_default+0x15e) [0x7f44978a16ce] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_call_io+0x6b) [0x7f44978bfebb] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run_internal+0x13b) [0x7f44978c15cb] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0x51) [0x7f44978bff61] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_run+0x41) [0x7f44978c0131] -> /usr/lib/dovecot/libdovecot.so.0(master_service_run+0x14) [0x7f4497831f74] -> dovecot/dict [0 clients, 0 lookups:0/0/0/0, 0 iters:0/0/0/0, 0 commits:0/0/0/0](main+0x189) [0x555e60d78139] -> /usr/lib/libc.so.6(__libc_start_main+0xd5) [0x7f44972cfb25] -> dovecot/dict [0 clients, 0 lookups:0/0/0/0, 0 iters:0/0/0/0, 0 commits:0/0/0/0](_start+0x2e) [0x555e60d7819e] Nov 15 12:19:19 wyvern dovecot[461]: imap(sam(a)samresto.dev)<51449><+BGq2NfQM/7Pisr9>: Error: Mailbox Trash/Processed: dict_iterate(priv/c841ad0291c27461ac670100a07d9965/) failed: Connection closed (reply took 0.204 secs (0.204 in dict wait, 0.000 in other ioloops, 0.000 in locks)) Nov 15 12:19:19 wyvern dovecot[461]: dict(51438): Fatal: master: service(dict): child 51438 killed with signal 6 (core dumped)

4 12

Dovecot 2.3.18 Panic-Error (name[0] != '\0')
by Aurel Mihai 22 Mar '22

22 Mar '22

Hello, after upgrade to version 2.3.18, we enconter a lot of errors, such as: Mar 22 14:08:32 mail2 dovecot: pop3(user@domain)<52269><3y3GeM3aQ+tWadtM>: Panic: file lib-event.c: line 585 (event_reason_code_prefix): assertion failed: (name[0] != '\0') Mar 22 14:08:32 mail2 dovecot: pop3(user@domain)<52269><3y3GeM3aQ+tWadtM>: Error: Raw backtrace: /usr/lib/dovecot/libdovecot.so.0(backtrace_append+0x42) [0x7f7ce322e012] -> /usr/lib/dovecot/libdovecot.so.0(backtrace_get+0x1e) [0x7f7ce322e12e] -> /usr/lib/dovecot/libdovecot.so.0(+0x101d4b) [0x7f7ce323ad4b] -> /usr/lib/dovecot/libdovecot.so.0(+0x101de1) [0x7f7ce323ade1] -> /usr/lib/dovecot/libdovecot.so.0(+0x55519) [0x7f7ce318e519] -> /usr/lib/dovecot/libdovecot.so.0(+0x594e2) [0x7f7ce31924e2] -> dovecot/pop3(client_handle_input+0x1c9) [0x55d5b5efa539] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_call_io+0x69) [0x7f7ce3250f79] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0x96) [0x7f7ce3251066] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_run+0x40) [0x7f7ce32511e0] -> /usr/lib/dovecot/libdovecot.so.0(master_service_run+0x13) [0x7f7ce31c4003] -> dovecot/pop3(main+0x2e6) [0x55d5b5ef81f6] -> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xea) [0x7f7ce2f93d0a] -> dovecot/pop3(_start+0x2a) [0x55d5b5ef838a] Mar 22 14:08:32 mail2 dovecot: pop3(user@domain)<52269><3y3GeM3aQ+tWadtM>: Fatal: master: service(pop3): child 52269 killed with signal 6 (core dumps disabled - https://dovecot.org/bugreport.html#coredumps) # dovecot -n # 2.3.18 (9dd8408c18): /etc/dovecot/dovecot.conf # Pigeonhole version 0.5.18 (0bc28b32) # OS: Linux 5.10.0-12-amd64 x86_64 Debian 11.2 # Hostname: auth_cache_verify_password_with_worker = yes auth_failure_delay = 5 secs auth_mechanisms = plain login auth_verbose = yes auth_worker_max_count = 256 default_client_limit = 10000 default_process_limit = 10000 default_vsz_limit = 1 G dict { lastlogin = mysql:/etc/dovecot/mysql/dovecot-dict-lastlogin.conf quotadict = mysql:/etc/dovecot/mysql/dovecot-dict-quota.conf } disable_plaintext_auth = no first_valid_uid = 100 imap_hibernate_timeout = 5 secs imap_idle_notify_interval = 3 mins log_timestamp = "%Y-%m-%d %H:%M:%S " login_log_format_elements = user=<%u> method=%m rip=%r lip=%l pid=%p %c login_trusted_networks = mail_fsync = always mail_gid = 8 mail_home = /home/virtual0/%d/%n mail_location = maildir:~/Maildir mail_nfs_index = yes mail_nfs_storage = yes mail_plugins = zlib quota mail_log notify mail_privileged_group = mail mail_uid = 150 maildir_stat_dirs = yes managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave metric imap_command { filter = event=imap_command_finished AND tagged_reply_state=OK group_by = cmd_name } metric imap_select_no { filter = event=imap_command_finished AND cmd_name=SELECT AND tagged_reply_state=NO } metric imap_select_no_notfound { filter = event=imap_command_finished AND cmd_name=SELECT AND tagged_reply="NO*Mailbox doesn't exist:*" } metric storage_http_gets { filter = event=http_request_finished AND category=storage AND method=get } mmap_disable = yes namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { auto = subscribe special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Spam { auto = subscribe autoexpunge = 30 days special_use = \Junk } mailbox Trash { auto = subscribe autoexpunge = 60 days special_use = \Trash } mailbox virtual/All { special_use = \All } prefix = } passdb { args = /etc/dovecot/mysql/dovecot-sql.conf driver = sql } plugin { last_login_dict = proxy::lastlogin last_login_key = # hidden, use -P to show it mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename mail_log_fields = uid box msgid size quota = dict:user::proxy::quotadict quota_rule2 = Trash:ignore quota_rule3 = Spam:ignore quota_status_nouser = DUNNO quota_status_overquota = 552 5.2.2 The email account that you tried to reach is over quota quota_status_success = DUNNO quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=80%% quota-warning 80 %u sieve = ~/.dovecot.sieve sieve_before = /etc/dovecot/sieve/default.sieve sieve_dir = ~/sieve trash = /etc/dovecot/dovecot-trash.conf zlib_save = gz zlib_save_level = 6 } protocols = imap sieve pop3 lmtp service anvil { client_limit = 50000 unix_listener anvil-auth-penalty { mode = 00 } } service auth { client_limit = 50000 unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-master { group = mail mode = 0660 user = vmail } user = root vsz_limit = 1 G } service dict { unix_listener dict { mode = 0660 user = vmail } } service imap-hibernate { unix_listener imap-hibernate { group = $default_internal_group mode = 0660 } } service imap-login { inet_listener imap { address = * port = 143 } inet_listener imaps { address = * port = 993 } process_min_avail = 16 service_count = 1 } service imap { extra_groups = $default_internal_group process_min_avail = 16 unix_listener imap-master { user = $default_internal_user } vsz_limit = 2 G } service lmtp { process_min_avail = 16 unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0600 user = postfix } vsz_limit = 1 G } service managesieve-login { inet_listener sieve { port = 4190 } process_min_avail = 16 service_count = 1 } service managesieve { vsz_limit = 1 G } service pop3-login { inet_listener pop3 { address = * port = 110 } inet_listener pop3s { address = * port = 995 } process_min_avail = 16 service_count = 1 } service pop3 { process_min_avail = 16 vsz_limit = 1 G } service quota-status { executable = /usr/lib/dovecot/quota-status -p postfix process_min_avail = 16 unix_listener /var/spool/postfix/private/quota-status { group = postfix mode = 0666 user = postfix } } service quota-warning { executable = script /usr/local/bin/quota-warning.sh unix_listener quota-warning { mode = 0660 user = vmail } user = vmail } service stats { unix_listener stats-reader { mode = 0660 user = vmail } unix_listener stats-writer { mode = 0666 user = vmail } } ssl_cert = </etc/dovecot/ssl/domain.pem ssl_dh = # hidden, use -P to show it ssl_key = # hidden, use -P to show it ssl_min_protocol = TLSv1 userdb { args = /etc/dovecot/mysql/dovecot-sql.conf driver = sql } protocol imap { imap_max_line_length = 64 k mail_max_userip_connections = 16 mail_plugins = zlib quota mail_log notify trash imap_quota last_login } protocol pop3 { mail_max_userip_connections = 10 mail_plugins = zlib quota mail_log notify last_login pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_fast_size_lookups = yes pop3_no_flag_updates = yes pop3_uidl_format = %08Xu%08Xv } protocol sieve { mail_max_userip_connections = 10 managesieve_max_compile_errors = 5 } protocol lda { auth_socket_path = /var/run/dovecot/auth-master mail_plugins = zlib quota mail_log notify sieve sendmail_path = /usr/lib/sendmail syslog_facility = mail } protocol lmtp { mail_plugins = zlib quota mail_log notify sieve syslog_facility = mail } Any help please? Aurel

1 0

Disconnected: Shutting down (disconnected while authenticating) :: after mysql restart :: bug?
by rudolf＠padaru.de 17 Mar '22

17 Mar '22

Good morning list, i looking for a while for a solution above problem. We use dovecot 2.3.7.2 (3c910f64b) (Ubuntu 20.04) and 2.3.13 (89f716dc2) (Ubuntu 18.04) . Often we have the problem, that the authentication (dovecot <-> mysql) dont work after an mysql restart. Unfortunately i cant reproduce this problem, if i restart the mysql-server the authentication work when the database is up again. If we have this problem it is enough to reload the dovecot. So that the auth-worker will reconnect and everything is fine again. I have tried to encircle the problem with verbose auth-logging a wile ago but i only see timeouts from the auth-worker while mysql is running But this is not the solution für the problem. Is there an option i can set to force the auth-worker to reconnect? Maybe an timeout or something else? Or is there an value set to high in my conf? Somethin like the idle_kill from anvil service? Or is it simply a bug? doveconf output: auth_anonymous_username = anonymous auth_cache_negative_ttl = 1 hours auth_cache_size = 0 auth_cache_ttl = 1 hours auth_cache_verify_password_with_worker = no auth_debug = no auth_debug_passwords = no auth_default_realm = auth_failure_delay = 2 secs auth_gssapi_hostname = auth_krb5_keytab = auth_master_user_separator = auth_mechanisms = plain login auth_policy_check_after_auth = yes auth_policy_check_before_auth = yes auth_policy_hash_mech = sha256 auth_policy_hash_nonce = auth_policy_hash_truncate = 12 auth_policy_log_only = no auth_policy_reject_on_fail = no auth_policy_report_after_auth = yes auth_policy_request_attributes = login=%{requested_username} pwhash=%{hashed_password} remote=%{rip} device_id=%{client_id} protocol=%s auth_policy_server_api_header = auth_policy_server_timeout_msecs = 2000 auth_policy_server_url = auth_proxy_self = auth_realms = auth_socket_path = auth-userdb auth_ssl_require_client_cert = no auth_ssl_username_from_cert = no auth_stats = no auth_use_winbind = no auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@üÜöÖäÄ auth_username_format = %Lu auth_username_translation = auth_verbose = no auth_verbose_passwords = no auth_winbind_helper_path = /usr/bin/ntlm_auth auth_worker_max_count = 60 base_dir = /var/run/dovecot config_cache_size = 1 M debug_log_path = default_client_limit = 1000 default_idle_kill = 1 mins default_internal_group = dovecot default_internal_user = dovecot default_login_user = dovenull default_process_limit = 100 default_vsz_limit = 256 M deliver_log_format = msgid=%m: %$ dict_db_config = director_flush_socket = director_mail_servers = director_max_parallel_kicks = 100 director_max_parallel_moves = 100 director_output_buffer_size = 10 M director_ping_idle_timeout = 30 secs director_ping_max_timeout = 1 mins director_servers = director_user_expire = 15 mins director_user_kick_delay = 2 secs director_username_hash = %u disable_plaintext_auth = no dotlock_use_excl = yes doveadm_allowed_commands = doveadm_api_key = doveadm_http_rawlog_dir = doveadm_password = doveadm_port = 0 doveadm_socket_path = doveadm-server doveadm_username = doveadm doveadm_worker_count = 0 dsync_alt_char = _ dsync_commit_msgs_interval = 100 dsync_features = dsync_hashed_headers = Date Message-ID dsync_remote_cmd = ssh -l%{login} %{host} doveadm dsync-server -u%u -U first_valid_gid = 1 first_valid_uid = 500 haproxy_timeout = 3 secs haproxy_trusted_networks = hostname = imap_capability = +XLIST imap_client_workarounds = imap_fetch_failure = disconnect-immediately imap_hibernate_timeout = 0 imap_id_log = imap_id_retain = no imap_id_send = name * imap_idle_notify_interval = 2 mins imap_literal_minus = no imap_logout_format = in=%i out=%o del=%{deleted} fetched_mails=%{fetch_hdr_count} imap_max_line_length = 64 k imap_metadata = no imap_urlauth_host = imap_urlauth_logout_format = in=%i out=%o imap_urlauth_port = 143 imapc_cmd_timeout = 5 mins imapc_connection_retry_count = 1 imapc_connection_retry_interval = 1 secs imapc_features = imapc_host = imapc_list_prefix = imapc_master_user = imapc_max_idle_time = 29 mins imapc_max_line_length = 0 imapc_password = imapc_port = 143 imapc_rawlog_dir = imapc_sasl_mechanisms = imapc_ssl = no imapc_ssl_verify = yes imapc_user = import_environment = TZ CORE_OUTOFMEM CORE_ERROR LISTEN_PID LISTEN_FDS info_log_path = instance_name = dovecot last_valid_gid = 0 last_valid_uid = 0 lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes lda_original_recipient_header = libexec_dir = /usr/lib/dovecot listen = *, :: lmtp_hdr_delivery_address = final lmtp_proxy = no lmtp_proxy_rawlog_dir = lmtp_rawlog_dir = lmtp_rcpt_check_quota = no lmtp_save_to_detail_mailbox = no lmtp_user_concurrency_limit = 0 lock_method = flock log_core_filter = log_debug = log_path = syslog log_timestamp = "%b %d %H:%M:%S " login_access_sockets = login_greeting = <myServer.com> mailserver ready. login_log_format = %$: %s login_log_format_elements = user=<%u> method=%m rip=%r lip=%l %c login_plugin_dir = /usr/lib/dovecot/modules/login login_plugins = login_proxy_max_disconnect_delay = 0 login_proxy_notify_path = proxy-notify login_source_ips = login_trusted_networks = mail_access_groups = mail_always_cache_fields = hdr.* flags mime.parts binary.parts body.snippet mail_attachment_detection_options = mail_attachment_dir = mail_attachment_fs = sis posix mail_attachment_hash = %{sha1} mail_attachment_min_size = 128 k mail_attribute_dict = mail_cache_compress_continued_percentage = 200 mail_cache_compress_delete_percentage = 20 mail_cache_compress_header_continue_count = 4 mail_cache_compress_min_size = 32 k mail_cache_fields = flags mail_cache_min_mail_count = 30 mail_cache_record_max_size = 64 k mail_cache_unaccessed_field_drop = 30 days mail_chroot = mail_debug = no mail_fsync = optimized mail_full_filesystem_access = no mail_gid = mail_home = mail_index_log2_max_age = 2 days mail_index_log_rotate_max_size = 1 M mail_index_log_rotate_min_age = 5 mins mail_index_log_rotate_min_size = 32 k mail_index_rewrite_max_log_bytes = 128 k mail_index_rewrite_min_log_bytes = 8 k mail_location = auto: mail_log_prefix = "%s(%u)<%{pid}><%{session}>: " mail_max_keyword_length = 50 mail_max_lock_timeout = 0 mail_max_userip_connections = 30 mail_never_cache_fields = mail_nfs_index = no mail_nfs_storage = no mail_plugin_dir = /usr/lib/dovecot/modules mail_plugins = " zlib" mail_prefetch_count = 0 mail_privileged_group = mail mail_save_crlf = no mail_server_admin = mail_server_comment = mail_shared_explicit_inbox = no mail_sort_max_read_count = 0 mail_temp_dir = /tmp mail_temp_scan_interval = 1 weeks mail_uid = mail_vsize_bg_after_count = 0 mailbox_idle_check_interval = 30 secs mailbox_list_index = yes mailbox_list_index_include_inbox = no mailbox_list_index_very_dirty_syncs = no maildir_broken_filename_sizes = no maildir_copy_with_hardlinks = yes maildir_empty_new = no maildir_stat_dirs = no maildir_very_dirty_syncs = no managesieve_client_workarounds = managesieve_implementation_string = Dovecot (Ubuntu) Pigeonhole managesieve_logout_format = bytes=%i/%o managesieve_max_compile_errors = 5 managesieve_max_line_length = 65536 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate mime foreverypart extracttext editheader imapflags notify vnd.dovecot.pipe vnd.dovecot.filter vnd.dovecot.execute master_user_separator = mbox_dirty_syncs = yes mbox_dotlock_change_timeout = 2 mins mbox_lazy_writes = yes mbox_lock_timeout = 5 mins mbox_md5 = apop3d mbox_min_index_size = 0 mbox_read_locks = dotlock mbox_very_dirty_syncs = yes mbox_write_locks = fcntl dotlock mdbox_preallocate_space = no mdbox_rotate_interval = 0 mdbox_rotate_size = 250 M mmap_disable = no namespace inbox { disabled = no hidden = no ignore_on_failure = no inbox = yes list = yes location = mailbox Archiv { auto = no autoexpunge = 0 autoexpunge_max_mails = 0 comment = driver = special_use = } mailbox Drafts { auto = no autoexpunge = 0 autoexpunge_max_mails = 0 comment = driver = special_use = } mailbox Junk { auto = no autoexpunge = 0 autoexpunge_max_mails = 0 comment = driver = special_use = } mailbox Sent { auto = no autoexpunge = 0 autoexpunge_max_mails = 0 comment = driver = special_use = } mailbox "Sent Messages" { auto = no autoexpunge = 0 autoexpunge_max_mails = 0 comment = driver = special_use = \Sent } mailbox Trash { auto = no autoexpunge = 0 autoexpunge_max_mails = 0 comment = driver = special_use = } order = 0 prefix = separator = subscriptions = yes type = private } old_stats_carbon_interval = 30 secs old_stats_carbon_name = old_stats_carbon_server = old_stats_command_min_time = 1 mins old_stats_domain_min_time = 12 hours old_stats_ip_min_time = 12 hours old_stats_memory_limit = 16 M old_stats_session_min_time = 15 mins old_stats_user_min_time = 1 hours passdb { args = /etc/dovecot/conf.d/zDovecot-sql.conf.ext auth_verbose = default default_fields = deny = no driver = sql master = no mechanisms = name = override_fields = pass = no result_failure = continue result_internalfail = continue result_success = return-ok skip = never username_filter = } plugin { sieve = ~/sieve/.dovecot.sieve sieve_after = ~/sieve_after/.dovecot_after.sieve sieve_before = ~/sieve_before/.dovecot_before.sieve sieve_dir = ~/sieve sieve_execute_bin_dir = /usr/local/bin/ sieve_execute_input_eol = lf sieve_extensions = +notify +imapflags +vnd.dovecot.pipe +vnd.dovecot.filter +vnd.dovecot.execute +editheader -reject sieve_filter_bin_dir = /usr/local/bin/ sieve_filter_input_eol = lf sieve_global_dir = /etc/dovecot/sieve/ sieve_max_redirects = 25 sieve_pipe_bin_dir = /usr/local/bin/ sieve_pipe_input_eol = lf sieve_plugins = sieve_extprograms sieve_redirect_envelope_from = recipient zlib_save = gz zlib_save_level = 6 } pop3_client_workarounds = pop3_delete_type = default pop3_deleted_flag = pop3_enable_last = no pop3_fast_size_lookups = no pop3_lock_session = no pop3_logout_format = top=%t/%p, retr=%r/%b, del=%d/%m, size=%s pop3_no_flag_updates = no pop3_reuse_xuidl = no pop3_save_uidl = no pop3_uidl_duplicates = allow pop3_uidl_format = %08Xu%08Xv pop3c_features = pop3c_host = pop3c_master_user = pop3c_password = pop3c_port = 110 pop3c_quick_received_date = no pop3c_rawlog_dir = pop3c_ssl = no pop3c_ssl_verify = yes pop3c_user = %u postmaster_address = postmaster@%{if;%d;ne;;%d;%{hostname}} protocols = imap pop3 sieve quota_full_tempfail = no rawlog_dir = recipient_delimiter = + rejection_reason = Your message to <%t> was automatically rejected:%n%r rejection_subject = Rejected: %s replication_dsync_parameters = -d -N -l 30 -U replication_full_sync_interval = 1 days replication_max_conns = 10 replicator_host = replicator replicator_port = 0 sendmail_path = /usr/sbin/sendmail service aggregator { chroot = . client_limit = 0 drop_priv_before_exec = no executable = aggregator extra_groups = fifo_listener replication-notify-fifo { group = mode = 0600 user = } group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 0 type = unix_listener replication-notify { group = mode = 0600 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service anvil { chroot = empty client_limit = 0 drop_priv_before_exec = no executable = anvil extra_groups = group = idle_kill = 4294967295 secs privileged_group = process_limit = 1 process_min_avail = 1 protocol = service_count = 0 type = anvil unix_listener anvil-auth-penalty { group = mode = 0600 user = } unix_listener anvil { group = mode = 0600 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service auth-worker { chroot = client_limit = 1 drop_priv_before_exec = no executable = auth -w extra_groups = group = idle_kill = 1 mins privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 1 type = unix_listener auth-worker { group = mode = 0600 user = $default_internal_user } user = vsz_limit = 18446744073709551615 B } service auth { chroot = client_limit = 0 drop_priv_before_exec = no executable = auth extra_groups = group = idle_kill = 1 mins privileged_group = process_limit = 1 process_min_avail = 0 protocol = service_count = 0 type = unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-client { group = mode = 0600 user = $default_internal_user } unix_listener auth-login { group = mode = 0600 user = $default_internal_user } unix_listener auth-master { group = mode = 0600 user = } unix_listener auth-userdb { group = mode = 0666 user = $default_internal_user } unix_listener login/login { group = mode = 0666 user = } unix_listener token-login/tokenlogin { group = mode = 0666 user = } user = root vsz_limit = 18446744073709551615 B } service config { chroot = client_limit = 0 drop_priv_before_exec = no executable = config extra_groups = group = idle_kill = 4294967295 secs privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 0 type = config unix_listener config { group = mode = 0600 user = } user = vsz_limit = 18446744073709551615 B } service dict-async { chroot = client_limit = 0 drop_priv_before_exec = no executable = dict extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 0 type = unix_listener dict-async { group = $default_internal_group mode = 0660 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service dict { chroot = client_limit = 1 drop_priv_before_exec = no executable = dict extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 0 type = unix_listener dict { group = $default_internal_group mode = 0660 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service director { chroot = . client_limit = 0 drop_priv_before_exec = no executable = director extra_groups = fifo_listener login/proxy-notify { group = mode = 00 user = } group = idle_kill = 4294967295 secs inet_listener { address = haproxy = no port = 0 reuse_port = no ssl = no } privileged_group = process_limit = 1 process_min_avail = 0 protocol = service_count = 0 type = unix_listener director-admin { group = mode = 0600 user = } unix_listener director-userdb { group = mode = 0600 user = } unix_listener login/director { group = mode = 00 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service dns_client { chroot = client_limit = 1 drop_priv_before_exec = no executable = dns-client extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 0 type = unix_listener dns-client { group = mode = 0666 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service doveadm { chroot = client_limit = 1 drop_priv_before_exec = no executable = doveadm-server extra_groups = $default_internal_group group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 1 type = unix_listener doveadm-server { group = mode = 0600 user = } user = vsz_limit = 18446744073709551615 B } service imap-hibernate { chroot = client_limit = 0 drop_priv_before_exec = no executable = imap-hibernate extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = imap service_count = 0 type = unix_listener imap-hibernate { group = $default_internal_group mode = 0660 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service imap-login { chroot = login client_limit = 0 drop_priv_before_exec = no executable = /usr/lib/dovecot/imap-login extra_groups = group = idle_kill = 0 inet_listener imap { address = haproxy = no port = 143 reuse_port = no ssl = no } inet_listener imaps { address = haproxy = no port = 993 reuse_port = no ssl = yes } privileged_group = process_limit = 0 process_min_avail = 4 protocol = imap service_count = 0 type = login user = dovecot vsz_limit = 18446744073709551615 B } service imap-urlauth-login { chroot = token-login client_limit = 0 drop_priv_before_exec = no executable = imap-urlauth-login extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = imap service_count = 1 type = login unix_listener imap-urlauth { group = mode = 0666 user = } user = $default_login_user vsz_limit = 18446744073709551615 B } service imap-urlauth-worker { chroot = client_limit = 1 drop_priv_before_exec = no executable = imap-urlauth-worker extra_groups = $default_internal_group group = idle_kill = 0 privileged_group = process_limit = 1024 process_min_avail = 0 protocol = imap service_count = 1 type = unix_listener imap-urlauth-worker { group = mode = 0600 user = $default_internal_user } user = vsz_limit = 18446744073709551615 B } service imap-urlauth { chroot = client_limit = 1 drop_priv_before_exec = no executable = imap-urlauth extra_groups = group = idle_kill = 0 privileged_group = process_limit = 1024 process_min_avail = 0 protocol = imap service_count = 1 type = unix_listener token-login/imap-urlauth { group = mode = 0666 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service imap { chroot = client_limit = 1 drop_priv_before_exec = no executable = imap extra_groups = $default_internal_group group = idle_kill = 0 privileged_group = process_limit = 1024 process_min_avail = 0 protocol = imap service_count = 1 type = unix_listener imap-master { group = mode = 0600 user = } unix_listener login/imap { group = mode = 0666 user = } user = vsz_limit = 18446744073709551615 B } service indexer-worker { chroot = client_limit = 1 drop_priv_before_exec = no executable = indexer-worker extra_groups = $default_internal_group group = idle_kill = 0 privileged_group = process_limit = 10 process_min_avail = 0 protocol = service_count = 0 type = unix_listener indexer-worker { group = mode = 0600 user = $default_internal_user } user = vsz_limit = 18446744073709551615 B } service indexer { chroot = client_limit = 0 drop_priv_before_exec = no executable = indexer extra_groups = group = idle_kill = 0 privileged_group = process_limit = 1 process_min_avail = 0 protocol = service_count = 0 type = unix_listener indexer { group = mode = 0666 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service ipc { chroot = empty client_limit = 0 drop_priv_before_exec = no executable = ipc extra_groups = group = idle_kill = 0 privileged_group = process_limit = 1 process_min_avail = 0 protocol = service_count = 0 type = unix_listener ipc { group = mode = 0600 user = $default_internal_user } unix_listener login/ipc-proxy { group = mode = 0600 user = $default_login_user } user = $default_internal_user vsz_limit = 18446744073709551615 B } service lmtp { chroot = client_limit = 1 drop_priv_before_exec = no executable = lmtp extra_groups = $default_internal_group group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = lmtp service_count = 0 type = unix_listener lmtp { group = mode = 0666 user = } user = vsz_limit = 18446744073709551615 B } service log { chroot = client_limit = 0 drop_priv_before_exec = no executable = log extra_groups = group = idle_kill = 4294967295 secs privileged_group = process_limit = 1 process_min_avail = 0 protocol = service_count = 0 type = log unix_listener log-errors { group = mode = 0600 user = } user = vsz_limit = 18446744073709551615 B } service managesieve-login { chroot = login client_limit = 0 drop_priv_before_exec = no executable = managesieve-login extra_groups = group = idle_kill = 0 inet_listener sieve { address = haproxy = no port = 4190 reuse_port = no ssl = no } privileged_group = process_limit = 0 process_min_avail = 0 protocol = sieve service_count = 0 type = login user = dovecot vsz_limit = 18446744073709551615 B } service managesieve { chroot = client_limit = 1 drop_priv_before_exec = no executable = managesieve extra_groups = group = idle_kill = 0 privileged_group = process_limit = 1024 process_min_avail = 0 protocol = sieve service_count = 1 type = unix_listener login/sieve { group = mode = 0666 user = } user = dovecot vsz_limit = 18446744073709551615 B } service old-stats { chroot = empty client_limit = 0 drop_priv_before_exec = no executable = old-stats extra_groups = fifo_listener old-stats-mail { group = mode = 0600 user = } fifo_listener old-stats-user { group = mode = 0600 user = } group = idle_kill = 4294967295 secs privileged_group = process_limit = 1 process_min_avail = 0 protocol = service_count = 0 type = unix_listener old-stats { group = mode = 0600 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service pop3-login { chroot = login client_limit = 0 drop_priv_before_exec = no executable = /usr/lib/dovecot/pop3-login extra_groups = group = idle_kill = 0 inet_listener pop3 { address = haproxy = no port = 110 reuse_port = no ssl = no } inet_listener pop3s { address = haproxy = no port = 995 reuse_port = no ssl = yes } privileged_group = process_limit = 0 process_min_avail = 4 protocol = pop3 service_count = 0 type = login user = dovecot vsz_limit = 18446744073709551615 B } service pop3 { chroot = client_limit = 1 drop_priv_before_exec = no executable = /usr/lib/dovecot/pop3 extra_groups = $default_internal_group group = idle_kill = 0 privileged_group = process_limit = 1024 process_min_avail = 0 protocol = pop3 service_count = 1 type = unix_listener login/pop3 { group = mode = 0666 user = } user = vsz_limit = 18446744073709551615 B } service replicator { chroot = client_limit = 0 drop_priv_before_exec = no executable = replicator extra_groups = group = idle_kill = 4294967295 secs privileged_group = process_limit = 1 process_min_avail = 0 protocol = service_count = 0 type = unix_listener replicator-doveadm { group = mode = 00 user = $default_internal_user } unix_listener replicator { group = mode = 0600 user = $default_internal_user } user = vsz_limit = 18446744073709551615 B } service stats { chroot = empty client_limit = 0 drop_priv_before_exec = no executable = stats extra_groups = group = idle_kill = 4294967295 secs privileged_group = process_limit = 1 process_min_avail = 0 protocol = service_count = 0 type = unix_listener stats-reader { group = dovecot mode = 0666 user = } unix_listener stats-writer { group = dovecot mode = 0666 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service submission-login { chroot = login client_limit = 0 drop_priv_before_exec = no executable = submission-login extra_groups = group = idle_kill = 0 inet_listener submission { address = haproxy = no port = 587 reuse_port = no ssl = no } privileged_group = process_limit = 0 process_min_avail = 0 protocol = submission service_count = 1 type = login user = $default_login_user vsz_limit = 18446744073709551615 B } service submission { chroot = client_limit = 1 drop_priv_before_exec = no executable = submission extra_groups = $default_internal_group group = idle_kill = 0 privileged_group = process_limit = 1024 process_min_avail = 0 protocol = submission service_count = 1 type = unix_listener login/submission { group = mode = 0666 user = } user = vsz_limit = 18446744073709551615 B } service tcpwrap { chroot = client_limit = 1 drop_priv_before_exec = no executable = tcpwrap extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 0 type = user = $default_internal_user vsz_limit = 18446744073709551615 B } shutdown_clients = no ssl = yes ssl_alt_cert = ssl_alt_key = ssl_ca = </etc/apache2/zertifikate/<myServer.com>.com.pem ssl_cert = </etc/apache2/zertifikate/<myServer.com>.com.pem ssl_cert_username_field = commonName ssl_cipher_list = EECDH+ECDSA+AESGCM:EECDH+aRSA+AESGCM:EECDH+ECDSA+SHA384:EECDH+ECDSA+SHA256:E ECDH+aRSA+SHA384:EECDH+aRSA+SHA256:EECDH+aRSA+RC4:EECDH:EDH+aRSA:!aNULL:!eNU LL:!LOW:!3DES:!MD5:!EXP:!PSK:!SRP:!DSS:!RC4 ssl_client_ca_dir = ssl_client_ca_file = ssl_client_cert = ssl_client_key = ssl_client_require_valid_cert = yes ssl_crypto_device = ssl_curve_list = ssl_dh = # hidden, use -P to show it ssl_key = # hidden, use -P to show it ssl_key_password = ssl_min_protocol = TLSv1.2 ssl_options = ssl_prefer_server_ciphers = yes ssl_require_crl = yes ssl_verify_client_cert = no state_dir = /var/lib/dovecot stats_writer_socket_path = stats-writer submission_client_workarounds = submission_host = submission_logout_format = in=%i out=%o submission_max_mail_size = 0 submission_max_recipients = 0 submission_relay_command_timeout = 5 mins submission_relay_connect_timeout = 30 secs submission_relay_host = submission_relay_master_user = submission_relay_max_idle_time = 29 mins submission_relay_password = submission_relay_port = 25 submission_relay_rawlog_dir = submission_relay_ssl = no submission_relay_ssl_verify = yes submission_relay_trusted = no submission_relay_user = submission_ssl = no submission_timeout = 30 secs syslog_facility = mail userdb { args = /etc/dovecot/conf.d/zDovecot-sql.conf.ext auth_verbose = default default_fields = driver = sql name = override_fields = result_failure = continue result_internalfail = continue result_success = return-ok skip = never } valid_chroot_dirs = verbose_proctitle = yes verbose_ssl = no version_ignore = no protocol lda { mail_plugins = " zlib sieve zlib" rejection_reason = Your message to <%t> was automatically discarded:%n%r } protocol imap { imap_client_workarounds = delay-newmail mail_plugins = " zlib mail_log notify zlib" ssl = yes } protocol pop3 { mail_plugins = zlib pop3_client_workarounds = oe-ns-eoh outlook-no-nuls pop3_no_flag_updates = no pop3_uidl_format = %08Xu%08Xv ssl = yes } Thank you for any advide or solution. Mit freundlichen Grüßen Yours sincerely Pascal Rudolf

1 0

Finding Users Over Quota
by dovecot＠ptld.com 17 Mar '22

17 Mar '22

Using doveadm quota will let you see if a specific user is over quota. Is there a way to have dovecot tell you which users are currently over quota? Is the quota_clone plugin a way to save user quota to dict like how last_login saves to dict? The documentation for quota_clone is MIA. (As of 3/16/22) https://wiki2.dovecot.org/Plugins v https://wiki2.dovecot.org/Plugins/QuotaClone v https://doc.dovecot.org/plugin-settings/quota-clone-plugin/ v 404 Not Found

2 1

SIS and tracing the origin of an attachment
by doug 16 Mar '22

16 Mar '22

Hi All, I'm trying to trace an attachment within an SIS subdirectory to the email message(s) that link to it. I say messages because I'm also using dovecot dedup. My understanding is the linked file name is the hash value of the attachments contents concatenated with the GUID of the email message. I have had marginal success with a message I created myself. Example: I generated an email with two attachments. Here are the links in my attachment directory. ./26/c5/26c5c540d41779d83d2f5388041d05c67d720d9a-73eca8051acd276272310000f2bc99a3 ./65/cd/65cd73112a489ef07f17ed5740aa60358e2dd3fb-74eca8051acd276272310000f2bc99a3 In my sent folder the actual GUID of the message is 75eca8051acd276272310000f2bc99a3. So the GUID of the attachment is based on the GUID of the message, but not exact. The second hex byte seems to be decremented as an offset of the attachment index from the GUID of the message. At least in my one example. # doveadm dump /mailstore/doug/mail/mailboxes/Sent/dbox-Mails/dovecot.index | grep guid | tail -1 - guid: 75eca8051acd276272310000f2bc99a3 With that actual GUID I can find the message with a search: # doveadm search -u doug mailbox Sent guid 75eca8051acd276272310000f2bc99a3 doug e5711f1cf2c9294f71090000059b96e4 53526 Now let's try to track down another email when only the HASH-GUID value is known. Here is one randomly picked. ./00/a2/00a2d5de3e41053d59bd10084826bbe094aa1c59-57857b09d1a327627e260000f2bc99a3 # doveadm search -A mailbox '*' guid 57857b09d1a327627e260000f2bc99a3 # doveadm search -A mailbox '*' guid 58857b09d1a327627e260000f2bc99a3 # doveadm search -A mailbox '*' guid 59857b09d1a327627e260000f2bc99a3 I repeated this incrementing and decrementing from 5085... through 5f85... and never located the message. This seems like it should be trivial but I've been struggling with it for days. The GUID isn't random, there must be a way to track the attachment back. What am I missing? And for those wondering why, our virus scanner flagged a number of attachments, some with several links, and I want ask the users to delete the offending messages so I can purge them from the server. If I can find the emails I can give them the mail folder, date/time, and subject of the message. -- Doug

3 5

AW: [EXT] AW: AW: AW: invalid lz4 chunk size??
by Joachim Lindenberg 16 Mar '22

16 Mar '22

What might go wrong? Or should I copy the directory myself from remote? What can go wrong with that? Thanks, Joachim -----Ursprüngliche Nachricht----- Von: Aki Tuomi <aki.tuomi(a)open-xchange.com> Gesendet: Wednesday, 16 March 2022 11:31 An: Joachim Lindenberg <dovecot(a)lindenberg.one> Betreff: Re: [EXT] AW: AW: AW: invalid lz4 chunk size?? It might, I can't promise it =) Aki > On 16/03/2022 12:29 Joachim Lindenberg <dovecot(a)lindenberg.one> wrote: > > > With remote I am referring to the second instance of mailcow including dovecot I am running, which has dovecot replication active. I am observing the issue on just one box. Thus I am hoping that when I remove the user mail directory on one host, replication will restore it from remote. > Thanks, Joachim > > -----Ursprüngliche Nachricht----- > Von: Aki Tuomi <aki.tuomi(a)open-xchange.com> > Gesendet: Wednesday, 16 March 2022 11:17 > An: Joachim Lindenberg <dovecot(a)lindenberg.one>; dovecot(a)dovecot.org > Betreff: Re: AW: AW: invalid lz4 chunk size?? > > Not sure what "remote" you are talking about. You can remove the file, and dovecot will notice it's absence and update it's indexes if this is maildir++ format. > > If this is sdbox, you need to run `doveadm force-resync -u user FolderName`. > > Aki > > > On 16/03/2022 12:08 Joachim Lindenberg <dovecot(a)lindenberg.one> wrote: > > > > > > Hi Aki, > > sure I can delete (or rename) the file(s) in the mail directory. > > Will sync then restore it from remote or should I do this manually? Should I stop dovecot during the process?` I am not very familiar with dovecot yet, as most of the complexity is hidden by mailcow. > > Thanks, Joachim > > > > -----Ursprüngliche Nachricht----- > > Von: Aki Tuomi <aki.tuomi(a)open-xchange.com> > > Gesendet: Wednesday, 16 March 2022 08:38 > > An: Joachim Lindenberg <dovecot(a)lindenberg.one>; dovecot(a)dovecot.org > > Betreff: Re: AW: invalid lz4 chunk size?? > > > > Hi, > > > > looks a lot like your mail file is corrupted. Not much you can do about it other than maybe delete the file? You can try recover it with `doveadm fetch -u someone text uid 1553 mailbox Sent` and then using `doveadm save -u someone -m Sent` to store it back. > > > > Aki > > > > > On 16/03/2022 09:35 Joachim Lindenberg <dovecot(a)lindenberg.one> wrote: > > > > > > > > > Nobody that can help? > > > Thanks, > > > Joachim > > > > > > ---------- > > > > > > I am still experiencing the issue. Any suggestion? > > > As I do have replication between two nodes and only one is showing the issue - can I rename the mailbox easily on one side and rely on replication to get the copy replaced? If that makes sense, which commands do you recommend? > > > Thanks, > > > Joachim > > > > > > -----Ursprüngliche Nachricht----- > > > Von: Joachim Lindenberg <dovecot(a)lindenberg.one> > > > Gesendet: Thursday, 3 March 2022 12:06 > > > An: 'Aki Tuomi' <aki.tuomi(a)open-xchange.com>; dovecot(a)dovecot.org > > > Betreff: AW: invalid lz4 chunk size?? > > > > > > dovecot --version reports 2.3.17.1 (476cd46418) Joachim > > > > > > -----Ursprüngliche Nachricht----- > > > Von: Aki Tuomi <aki.tuomi(a)open-xchange.com> > > > Gesendet: Thursday, 3 March 2022 11:56 > > > An: Joachim Lindenberg <dovecot(a)lindenberg.one>; > > > dovecot(a)dovecot.org > > > Betreff: Re: invalid lz4 chunk size?? > > > > > > > > > > On 03/03/2022 12:24 Joachim Lindenberg <dovecot(a)lindenberg.one> wrote: > > > > > > > > > > > > Hello, > > > > when accessing one mailbox via ActiveSync / SoGo / Dovecot I get the following error repeatedly in dovecot log: > > > > imap(somemailbox(a)example.org)<1579><***>: Error: Mailbox Sent: > > > > UID=1553: read(compress()) failed: read() failed: lz4.read(): invalid lz4 chunk size: 1601505441 at 16842752 (read reason=) I can still access the mailbox via IMAP though. > > > > What can I do to resolve the issue? > > > > Thanks, > > > > Joachim > > > > > > Which version of Dovecot? > > > > > > Aki

2 1

invalid lz4 chunk size??
by Joachim Lindenberg 16 Mar '22

16 Mar '22

Hello, when accessing one mailbox via ActiveSync / SoGo / Dovecot I get the following error repeatedly in dovecot log: imap(somemailbox(a)example.org)<1579><***>: Error: Mailbox Sent: UID=1553: read(compress()) failed: read() failed: lz4.read(): invalid lz4 chunk size: 1601505441 at 16842752 (read reason=) I can still access the mailbox via IMAP though. What can I do to resolve the issue? Thanks, Joachim

2 7

sieve-filter not respecting :create flag of fileinto
by David Arroyo 16 Mar '22

16 Mar '22

Hello, I recently significantly modified my sieve rules for filing mailing list posts in my Fastmail inbox. The rules contain a few rules that file mail like so: fileinto :create ml.${5}${4}{$3}{$2}{$1}; # reversed list-id The rules work as expected on delivery to fastmail. Because these rules only run on delivery, and the new folder layout is different from my existing one, I want to apply the rules to my existing mail. I thought dovecot's `sieve-filter` command, together with the `imapc` storage backend, would be a good way to do that, so I moved some existing mail into a folder, `sieve-test`, and ran the following: sieve-filter -x '+editheader +mailbox' -W -e rules.sieve sieve-test However, what I see is that sieve-filter fails when the new directory does not exist. Here is some example (redacted) output: Info: imapc(imap.fastmail.com:993): Connected to x.x.x.x:993 (local x.x.x.x) error: msgid=<xxx>: fileinto action: failed to store into mailbox 'ml.gnu.guix-devel': Mailbox does not exist. sieve-filter(me): Info: sieve: msgid=<xxx>: left message in mailbox 'sieve-test' error: sieve script execution failed for this message; message left in source mailbox. sieve-filter(me): Info: sieve: msgid=<yyy>: fileinto action: stored mail into mailbox 'ml.9fans.9fans' My config looks like this: protocols = none mail_location = imapc: namespace { inbox = yes separator = . } imapc_host = imap.fastmail.com imapc_port = 993 imapc_ssl = imaps imapc_user = $username If this is a bug in sieve-filter I'd be happy to try and fix it, but I'm reaching out here first to see if this is expected behavior or a misconfiguration on my part. Thanks for any help, David

2 4

mdbox_rotate_size recommendation / performance
by Lucas Rolff 15 Mar '22

15 Mar '22

Hi guys, When using mdbox under Dovecot, the mdbox_rotate_size setting defaults to 10 megabyte - from a performance point of view if using spinning drives does this matter whether one goes for e.g. 2MB versus 10MB, especially in the combination with compression. Does anyone have any performance data regarding it’s size, and what’s a decent trade-off between limiting IOPS required by the drive versus the sequential read/write speeds. Any pointers would be awesome! Thanks in advance

1 0

AntiVirus in Maildir
by Masakazu Hirose 15 Mar '22

15 Mar '22

Hi all, I run a mail server on Maildir. Does Dovecot work correctly if I delete the mail files stored in Maildir? Do I need to run the doveadm command? I want to run a virus scan on Maildir. When a virus is detected, the mail file is deleted without notifying Dovecot. I assumed this was incorrect behavior for Dovecot. Please help me when someone has time. Thanks, Masa

4 5

allow_nets equivalent for all users?
by Bryan K. Walton 14 Mar '22

14 Mar '22

Hi, It is my understanding that allow_nets is a field that gets used in a password database, and therefore is a per-user setting. Is there an equivalent method for defining allowed network(s) for ALL users? In other words, a single setting that applies to every user? Thanks, Bryan

2 4

Possible bug interaction between Dovecot and Thunderbird 98/99 email client
by Arthur Koziol 11 Mar '22

11 Mar '22

Hi Dovecot devs, My name is Arthur. I'm a volunteer with Mozilla and am working with a user who's having some odd issues with his Thunderbird email client. I'm reaching out to you folks because he's using an at-home IMAP setup with Dovecot. It's not 100% clear if his setup is polling his GMail accounts and then pulling everything to his Dovecot setup but if there's any interesting in jumping into the bug we're trying to help this user with, feel free to browse the bug at https://bugzilla.mozilla.org/show_bug.cgi?id=1726319 I asked the user if he's reached out to the Dovecot devs yet but he's not replied. We're not sure if this is a Dovecot / setup issue, a Thunderbird issue or something in between but we could use some other eyes and ideas of what to check for this user if you guys have a couple seconds to take a look. Thanks for reading. best, Arthur

1 0

Dovecot High Availability ?
by White, Daniel E. (GSFC-770.0)[NICS] 11 Mar '22

11 Mar '22

Are there any current, free high availability strategies for Dovecot ?

2 1

Can't create viable password hashes
by David Griffith 11 Mar '22

11 Mar '22

I recently discovered that I can no longer create viable password hashes for use in /etc/dovecot/dovecot.passwd. So far, I've been using the following command done by root: doveadm_cmd pw -s SHA512-CRYPT -u joe -p mypassword This creates something that looks legit, but dovecot won't accept it. I've been using my own solution for allowing users to change their dovecot passwords (https://gitlab.com/DavidGriffith/dovepasswd) and this is how it generates the hashes. Is there a better way of going about this? -- David Griffith dave(a)661.org A: Because it fouls the order in which people normally read text. Q: Why is top-posting such a bad thing? A: Top-posting. Q: What is the most annoying thing in e-mail?

1 0

XOAUTH2 submission - "500 5.5.2 Line too long"
by Rosario Esposito 08 Mar '22

08 Mar '22

Hello, I setup a dovecot submission server, using xoauth2 authentication. My roundcube webmail points to dovecot submission. In roundcube smtp logs, I see: [08-Mar-2022 15:47:16 +0100]: <qjonb57c> Recv: 250-PIPELINING [08-Mar-2022 15:47:16 +0100]: <qjonb57c> Recv: 250 XCLIENT ADDR PORT PROTO HELO LOGIN SESSION TTL TIMEOUT FORWARD [08-Mar-2022 15:47:16 +0100]: <qjonb57c> Send: AUTH XOAUTH2 dXNlcj1yZXNwb3NpdAFhdXRoPWJlYXJlci<<<...*very long base64 string*....>>> [08-Mar-2022 15:47:16 +0100]: <qjonb57c> Recv: 500 5.5.2 Line too long [08-Mar-2022 15:47:16 +0100]: <qjonb57c> Send: ****** [4] [08-Mar-2022 15:47:16 +0100]: <qjonb57c> Recv: 221 2.0.0 Bye And, in dovecot logs I found: Mar 8 15:47:17 ### dovecot[97376]: submission-login: Debug: smtp-server: conn 172.18.6.100:38658 [1]: command EHLO: 250 reply: Sent: 250-###.<#####> 8BITMIME AUTH PLAIN OAUTHBEARER XOAUTH2 BURL imap CHUNKING ENHANCEDSTATUSCODES SIZE PIPELINING XCLIENT ADDR PORT PROTO HELO LOGIN SESSION TTL TIMEOUT FORWARD Mar 8 15:47:17 ### dovecot[97376]: submission-login: Debug: smtp-server: conn 172.18.6.100:38658 [1]: command EHLO: Finished Mar 8 15:47:17 ### dovecot[97376]: submission-login: Debug: smtp-server: conn 172.18.6.100:38658 [1]: command EHLO: Destroy Mar 8 15:47:17 ### dovecot[97376]: submission-login: Debug: smtp-server: conn 172.18.6.100:38658 [1]: command EHLO: 250 reply: Destroy Mar 8 15:47:17 ### dovecot[97376]: submission-login: Debug: smtp-server: conn 172.18.6.100:38658 [1]: Trigger output Mar 8 15:47:17 ### dovecot[97376]: submission-login: Debug: smtp-server: conn 172.18.6.100:38658 [1]: No more commands pending Mar 8 15:47:17 ### dovecot[97376]: submission-login: Debug: smtp-server: conn 172.18.6.100:38658 [1]: Sending replies Mar 8 15:47:17 ### dovecot[97376]: submission-login: Debug: smtp-server: conn 172.18.6.100:38658 [1]: No more commands pending Mar 8 15:47:17 ### dovecot[97376]: submission-login: Debug: smtp-server: conn 172.18.6.100:38658 [1]: Client sent invalid command: Command line is too long Apparently, the problem came out after upgrading from dovecot 2.3.17 to 2.3.18 Any ideas ?

3 2

Replicator Issues on Large Mail Boxes
by Paul Kudla (Scom.ca Internet Services Inc.) 08 Mar '22

08 Mar '22

Ok running : freebsd-12.1 dovecot-2.3.18.current dovecot-2.3-pigeonhole-0.5.18.current simply put replication works fine on smaller email boxes without issues. dsync also works when run manually, longest sync is 60 secords or so when using dsync so need replicator bumped up ? i get the fact that the file locking issue relative since a larger mailbox will take longer to replicate when an email comes in ? mail18 03-05 18:05:51 {dovecot} [15799] (872623573) doveadm(keith(a)elirpa.com)<32249><GnS3M53sI2L5fQAAz1jc/w>: Error: Couldn't lock /data/dovecot/users/elirpa.com/keith(a)elirpa.com//tmp/.dovecot-sync.lock: fcntl(/data/dovecot/users/elirpa.com/keith@elirpa.com//tmp/.dovecot-sync.lo…, write-lock, F_SETLKW) locking failed: Timed out after 30 seconds (WRITE lock held by pid 31519) so what i need is where fcntl is setting a 30 second timeout for replication (i have adjust all the others in the src code) simply put replicator fails and retries and keeps failing which is understandable as it probably needs a little more time ? # sync.users carol(a)scom.ca none 00:02:51 08:16:34 - y nick(a)elirpa.com low 02:45:17 09:28:32 - y keith(a)elirpa.com none 02:30:13 09:28:32 - y paul(a)scom.ca high 02:45:17 09:28:32 - y ed(a)scom.ca none 02:34:34 09:28:32 - y ed.hanna(a)dssmgmt.com high 02:45:17 09:28:32 - y i found under /programs/src/mail/dovecot-2.3.18.current/src/lib file-lock.c struct flock fl; fl.l_type = lock_type; fl.l_whence = SEEK_SET; fl.l_start = 0; fl.l_len = 0; ret = fcntl(fd, timeout_secs != 0 ? F_SETLKW : F_SETLK, &fl); if (timeout_secs != 0) { alarm(0); file_lock_wait_end(path); } if (ret == 0) break; if (timeout_secs == 0 && (errno == EACCES || errno == EAGAIN)) { /* locked by another process */ *error_r = t_strdup_printf( "fcntl(%s, %s, F_SETLK) locking failed: %m " "(File is already locked)", path, lock_type_str); return 0; } if (err_is_lock_timeout(started, timeout_secs)) { errno = EAGAIN; *error_r = t_strdup_printf( "fcntl(%s, %s, F_SETLKW) locking failed: " "Timed out after %u seconds%s", path, lock_type_str, timeout_secs, file_lock_find(fd, set->lock_method, lock_type)); return 0; } *error_r = t_strdup_printf("fcntl(%s, %s, %s) locking failed: %m", path, lock_type_str, timeout_secs == 0 ? "F_SETLK" : "F_SETLKW"); if (errno == EDEADLK && !set->allow_deadlock) { i_panic("%s%s", *error_r, file_lock_find(fd, set->lock_method, lock_type)); } return -1; #endif -- Happy Saturday !!! Thanks - paul Paul Kudla Scom.ca Internet Services <http://www.scom.ca> 004-1009 Byron Street South Whitby, Ontario - Canada L1N 4S3 Toronto 416.642.7266 Main 1.866.411.7266 Fax 1.888.892.7266

2 1

Is fts_autoindex_exclude options working fine?
by Alessio Cecchi 07 Mar '22

07 Mar '22

Hi, we have some trouble with Solr ad FTS engine. Solr have some spike of load and responding slow when an user expunge or append a message. fts_autoindex is set to "yes". So I add to 90-plugin.conf these options: fts_autoindex_exclude = Drafts fts_autoindex_exclude2 = Spam fts_autoindex_exclude3 = Trash fts_autoindex_exclude4 = Sent or fts_autoindex_exclude = \Drafts fts_autoindex_exclude2 = \Junk fts_autoindex_exclude3 = \Trash fts_autoindex_exclude4 = \Sent But the problem is still present. Here some example of logs when users have timeout in their email client, specially when saving in Drafts automatically: Mar 7 12:21:37 pop01 dovecot: imap(user1(a)company1.com) session=<flNVCZ/ZcO5dPnGT>: Warning: Maildir /home/vmail/domains/company1.com/user1/Maildir/.Drafts: Synchronization took 119 seconds (0 new msgs, 0 flag change attempts, 1 expunge attempts) Mar 7 12:21:37 pop01 dovecot: imap(user1(a)company1.com) session=<flNVCZ/ZcO5dPnGT>: Disconnected: Connection closed (UID EXPUNGE finished 118.715 secs ago) in=77617 out=679511 deleted=1 expunged=1 autoexpunged=0 trashed=0 appended=2 hdr_count=0 hdr_bytes=0 body_count=0 body_bytes=0 Mar 7 12:21:52 pop02 dovecot: imap(user2(a)company2.net) session=<B9NNCZ/Z+uC5Ydlv>: Warning: Maildir /home/vmail/domains/company2.net/user2/Maildir/.Trash: Synchronization took 149 seconds (0 new msgs, 0 flag change attempts, 1 expunge attempts) Mar 7 12:21:52 pop02 dovecot: imap(user2(a)company2.net) session=<B9NNCZ/Z+uC5Ydlv>: Disconnected: Logged out in=2407 out=7025 deleted=0 expunged=0 autoexpunged=1 trashed=0 appended=0 hdr_count=0 hdr_bytes=0 body_count=0 body_bytes=0 Is my fts_autoindex_exclude wrong or there are some limits with this option? Here the relevant part of 15-mailboxes.conf namespace inbox { inbox = yes location = mailbox Archive { auto = subscribe special_use = \Archive } mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox Sent { auto = subscribe special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Spam { auto = subscribe special_use = \Junk } mailbox Trash { auto = subscribe special_use = \Trash } mailbox virtual/All { comment = All my messages special_use = \All } prefix = separator = / } Thanks -- Alessio Cecchi Postmaster @http://www.qboxmail.it https://www.linkedin.com/in/alessice

1 0

doveadm complains about virtual namespace
by Roberto Sanchez 07 Mar '22

07 Mar '22

Hi, I’ve setup my server __user__nd mail sending/receiving is all working without issue. However, a cron script that cleans up the Junk folder and runs: doveadm expunge -A mailbox Junk savedbefore 60d gives out the following error: doveadm(__user__(a)example.com): Error: Namespace 'Virtual.': Unknown mail storage driver virtual I don’t know if I have a configuration issue or if I have to load the virtual plugin at some other point in the config? I would appreciate any help. This is the output with debug enabled, and further below is my dovecot -n output (I’ve changed the user name to __user__ and the domain to example.com) Debug: Loading modules from directory: /usr/lib/dovecot/modules/doveadm Debug: Skipping module doveadm_acl_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_acl_plugin.so: undefined symbol: acl_user_module (this is usually intentional, so just ignore this message) Debug: Skipping module doveadm_expire_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_expire_plugin.so: undefined symbol: expire_set_deinit (this is usually intentional, so just ignore this message) Debug: Skipping module doveadm_quota_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_quota_plugin.so: undefined symbol: quota_user_module (this is usually intentional, so just ignore this message) Debug: Module loaded: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_sieve_plugin.so Debug: Skipping module doveadm_fts_lucene_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/lib20_doveadm_fts_lucene_plugin.so: undefined symbol: lucene_index_iter_deinit (this is usually intentional, so just ignore this message) Debug: Skipping module doveadm_fts_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/lib20_doveadm_fts_plugin.so: undefined symbol: fts_user_get_language_list (this is usually intentional, so just ignore this message) Debug: Skipping module doveadm_mail_crypt_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/libdoveadm_mail_crypt_plugin.so: undefined symbol: mail_crypt_box_get_pvt_digests (this is usually intentional, so just ignore this message) Debug: auth-master: userdb list: Started listing users (user_mask=) Debug: auth-master: conn unix:/var/run/dovecot/auth-userdb: Connecting Debug: auth-master: conn unix:/var/run/dovecot/auth-userdb: Client connected (fd=10) Debug: auth-master: userdb list: Returned username: __user__(a)example.com doveadm(__user__(a)example.com)<1068593><>: Debug: auth-master: userdb lookup(__user__(a)example.com): Started userdb lookup doveadm(__user__(a)example.com)<1068593><>: Debug: auth-master: conn unix:/var/run/dovecot/auth-userdb: Connecting doveadm(__user__(a)example.com)<1068593><>: Debug: auth-master: conn unix:/var/run/dovecot/auth-userdb: Client connected (fd=12) doveadm(__user__(a)example.com)<1068593><>: Debug: auth-master: userdb lookup(__user__(a)example.com): auth USER input: __user__(a)example.com maildir=example.com/__user__/ home=/var/mail/vhosts/example.com/__user__ uid=5000 gid=5000 doveadm(__user__(a)example.com)<1068593><>: Debug: auth-master: userdb lookup(__user__(a)example.com): Finished userdb lookup (username=__user__(a)example.com maildir=example.com/__user__/ home=/var/mail/vhosts/example.com/__user__ uid=5000 gid=5000) doveadm(__user__(a)example.com)<1068593><>: Debug: Added userdb setting: plugin/maildir=example.com/__user__/ doveadm(__user__(a)example.com): Debug: Effective uid=5000, gid=5000, home=/var/mail/vhosts/example.com/__user__ doveadm(__user__(a)example.com): Debug: Namespace inbox: type=private, prefix=, sep=, inbox=yes, hidden=no, list=yes, subscriptions=yes location=maildir:/var/mail/vhosts/example.com/__user__/Maildir doveadm(__user__(a)example.com): Debug: maildir++: root=/var/mail/vhosts/example.com/__user__/Maildir, index=, indexpvt=, control=, inbox=/var/mail/vhosts/example.com/__user__/Maildir, alt= doveadm(__user__(a)example.com): Debug: Namespace virtual: type=private, prefix=Virtual., sep=., inbox=no, hidden=no, list=yes, subscriptions=yes location=virtual:/var/mail/virtual:INDEX=/var/mail/vhosts/example.com/__use… doveadm(__user__(a)example.com): Error: Namespace 'Virtual.': Unknown mail storage driver virtual > dovecot -n # 2.3.7.2 (3c910f64b): /etc/dovecot/dovecot.conf # Pigeonhole version 0.5.7.2 () # OS: Linux 5.16.3-x86_64-linode152 x86_64 Ubuntu 20.04.4 LTS # Hostname: bender.example.com auth_mechanisms = plain login auth_username_format = %u mail_location = maildir:%h/Maildir mail_privileged_group = vmail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate mime foreverypart extracttext namespace inbox { inbox = yes location = mailbox Archive { auto = subscribe special_use = \Archive } mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox Junk { auto = subscribe autoexpunge = 30 days special_use = \Junk } mailbox Sent { auto = subscribe special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { auto = subscribe autoexpunge = 30 days special_use = \Trash } prefix = } namespace virtual { list = yes location = virtual:/var/mail/virtual:INDEX=/var/mail/vhosts/%d/%n/virtual mailbox All { auto = subscribe comment = All my messages special_use = \All } mailbox Flagged { auto = subscribe comment = All my flagged messages special_use = \Flagged } prefix = Virtual. separator = . subscriptions = yes } passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { sieve = file:%h/sieve;active=%h/dovecot.sieve sieve_before = /etc/dovecot/sieve/ } postmaster_address = postmaster at example.com protocols = imap lmtp sieve service auth-worker { user = vmail } service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-userdb { mode = 0600 user = vmail } user = dovecot } service imap-login { inet_listener imap { port = 0 } inet_listener imaps { port = 993 ssl = yes } } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0600 user = postfix } } service managesieve-login { inet_listener sieve { address = localhost port = 4190 } } service stats { unix_listener stats-reader { group = www-data mode = 0660 user = www-data } unix_listener stats-writer { group = www-data mode = 0660 user = www-data } } ssl = required ssl_cert = </etc/dovecot/private/dovecot.pem ssl_client_ca_dir = /etc/ssl/certs ssl_dh = # hidden, use -P to show it ssl_key = # hidden, use -P to show it ssl_min_protocol = TLSv1.2 ssl_prefer_server_ciphers = yes userdb { driver = prefetch } userdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } userdb { args = uid=vmail gid=vmail home=/var/mail/vhosts/%d/%n driver = static } protocol lmtp { mail_plugins = " sieve virtual" postmaster_address = postmaster(a)example.com } protocol lda { mail_plugins = " virtual" } protocol imap { mail_plugins = " virtual" } protocol sieve { mail_plugins = virtual }

3 2

Pigeonhole Sieve: Vacation Extension issue
by Zakaria 05 Mar '22

05 Mar '22

Hi there, I wondered if there is any one who can help me out on this issue. I tried to setup the vacation extension, and it works fine if the Return-Path header and Envelope-From field in Received wasn’t rewritten and contains the actual sender email address which the vacation extension will retrieve from and reply to. Given, I’ve rewritten both headers, to modify TLS connection mailed-by address and I had to revert back to get the vacation extension working, I wondered if there is anyone know how to modify the Sieve settings in Dovecot config for LMTP/LDA and Sieve, or Sieve script rules to retrieve sender email address from From header or any other specific header? If it's not possible, it would be so good if its implemented, it doesn’t seem to be a hard task, so please log this as a feature request. With thanks. Zakaria. Btw, all my prayers and solidarity I send out to Ukraine, Russia and the rest of Europe, and the world, and the sick from this and COVID and alike. We should value one another, Seriously, Putin must urgently stop giving to who want destruction and harm in Europe and manipulating behind the scene such devil affair and leading to this very sickening and unacceptable horror. Palestine deserve justice than preoccupying the world with creating more injustices.

1 0

doveadm quota get hangs for 60 seconds (some analysis done)
by jaroslav＠thinline.cz 05 Mar '22

05 Mar '22

Hello, I encountered somewhat strange behaviour when running doveadm quota get with wildcard username (all usernames are in user@domain format): doveadm -f pager quota get -u *(a)example.domain The command hangs for 60 seconds before returning its result. I tried to dig into the issue a bit using strace and found out that there seems to be some kind of communication mismatch between Dovecot processes. Here is what I found - sorry for the wall of text, strace outputs tend to be large, I tried to reduce them as much as possible. I also tried to draw some conclusions below. This is from strace in the doveadm process, it connects to auth-userdb and requests list of users 1646473083.263021 connect(10, {sa_family=AF_UNIX, sun_path="/run/dovecot/auth-userdb"}, 110) = 0 1646473083.263627 write(10, "VERSION\t1\t0\nLIST\t1\tuser=*(a)example.domain\n", 47) = 47 1646473083.263807 read(10, "VERSION\t1\t1\nSPID\t30012\n", 8192) = 23 1646473084.188212 read(10, "LIST\t1\tuser1@notthat.domain\nLIST\t1\tuser2@another.domain\nLIST\t1\tuser3@also.not\nLIST\t1\t.... This list goes on, the server has over 10000 user accounts. (As a side note, this behaviour struck me as strange - I would expect that the result would be filtered by the server side of the connection, only listing users that match the requested wildcard. I don't know anything about Dovecot internals though, so this might be perfectly normal.) At some point the returned data contain users doveadm is interested in (ie. users that match the wildcard) and requests their information from other Dovecot services, this is an excerpt for a dict service: 1646473084.224608 connect(13, {sa_family=AF_UNIX, sun_path="/run/dovecot/dict"}, 110) = 0 1646473084.225617 write(13, "H2\t2\t0\trelevantuser(a)example.domain\tsqldomainquota\n", 50) = 50 No data are read from FD 10 during this time. When all users are queried, reading from FD 10 resumes 1646473084.274405 read(10, "ifth.domain\nLIST\t1\tuser987(a)domain.six\nLIST\t1\t... At this point though, the process gets stuck: 1646473084.274514 epoll_wait(11, [], 1, 0) = 0 1646473084.274555 read(10, 0x5620076d79dd, 6035) = -1 EAGAIN (Resource temporarily unavailable) 1646473084.274601 epoll_wait(11, [{EPOLLIN, {u32=124338208, u64=94695563280416}}], 1, 155000) = 1 It resumes after 60 seconds, reads some more users and then receives string "DONE" 1646473144.287149 read(10, "LIST\t1\tuser456@domain.seven\nLIST\t1\tuser123@domain.e8\nLIST\t1\tuser7865@dom.nine\n", 6035) = 99 1646473144.287149 read(10, "LIST\t1\t ... ", 5936) = 82 ... 1646473144.294373 epoll_wait(11, [{EPOLLIN, {u32=124338208, u64=94695563280416}}], 1, 155000) = 1 1646473144.307846 read(10, "DONE\t1\t\n", 1611) = 8 Note that at this point the read syscall is no longer trucated. As opposed to reads above, which amounted to 8kB blocks, these are reading few addresses at a time. After the "DONE" string is received, there is no more communication with other Dovecot processes, doveadm prints out results to the console and terminates. Next I investigated the auth process. 1646473083.263121 accept(11, {sa_family=AF_UNIX}, [28->2]) = 23 1646473083.263181 getsockname(23, {sa_family=AF_UNIX, sun_path="/run/dovecot/auth-userdb"}, [28->27]) = 0 1646473083.263690 read(23, "VERSION\t1\t0\nLIST\t1\tuser=*(a)example.domain\n", 1024) = 47 1646473083.263939 connect(24, {sa_family=AF_UNIX, sun_path="auth-worker"}, 110) = 0 1646473083.264228 write(24, "VERSION\tauth-worker\t1\t0\nDBHASH\t1234567890abcdef1234567890abcdef\tfedcba0987654321fedcba0987654321\n", 97) = 97 1646473083.264271 writev(24, [{iov_base="1\t", iov_len=2}, {iov_base="LIST\t1\tuser=*(a)example.domain\tservice=\toriginal-username", iov_len=61}, {iov_base="\n", iov_len=1}], 3) = 64 1646473084.187567 read(24, "1\t*\tuser1(a)notthat.domain\n1\t*\t... 1646473084.187977 write(23, "LIST\t1\tuser1(a)notthat.domain\nLIST\t1\t Reads and writes alternate until these syscalls: 1646473084.238938 read(24, " ... \n1\tOK\n", 8167) = 5354 1646473084.239108 write(23, "LIST\t1\t ... , 51224) = -1 EAGAIN (Resource temporarily unavailable) 1646473084.239536 write(23, "LIST\t1\t ... , 51224) = -1 EAGAIN (Resource temporarily unavailable) From the timing this looks like a kernel buffer for the connection is filled because the other side is not reading the data. This matches strace from doveadm which is at this point reading information about quotas from dict service (timestamp 1646473084.225617.) Auth process seems to react to this by putting the FD on epoll list and then it goes to handle other connections. FD 24 is removed from the epoll list at the same time: 1646473084.239926 epoll_ctl(14, EPOLL_CTL_ADD, 23, {EPOLLOUT|EPOLLERR|EPOLLHUP, {u32=109861328, u64=94566699784656}}) = 0 1646473084.239980 epoll_ctl(14, EPOLL_CTL_DEL, 24, 0x7ffca3a9ae2c) = 0 FD 23 becomes writable relatively quickly, pending data is written to it and read from FD 24 is attempted with no data available: 1646473084.270224 epoll_ctl(14, EPOLL_CTL_DEL, 23, 0x7ffca3a9ae5c) = 0 1646473084.270271 write(23, "LIST\t1\t ... , 51224) = 51224 1646473084.270620 epoll_ctl(14, EPOLL_CTL_ADD, 24, {EPOLLIN|EPOLLPRI|EPOLLERR|EPOLLHUP, {u32=109860944, u64=94566699784272}}) = 0 1646473084.270712 read(24, 0x5602069198e3, 2813) = -1 EAGAIN (Resource temporarily unavailable) Again, nothing else happens for 60 seconds until FD 24 signals what I presume is a connection close attempt. Note that there was no data read from FD 24 but when the "SHUTDOWN" string arrives from it, auth process starts writing items to FD 23, one by one. 1646473144.286936 read(24, "SHUTDOWN\n", 2813) = 9 1646473144.287003 write(23, "LIST\t1\tuser456(a)domain.seven\n", 29) = 29 1646473144.287059 write(23, "LIST\t1\tuser123(a)domain.e8\n", 31) = 31 1646473144.287103 write(23, "LIST\t1\tuser7865(a)dom.nine\n", 39) = 39 There are multiple user databases, I assume the following is a lookup from the others: 1646473144.294256 writev(24, [{iov_base="2\t", iov_len=2}, {iov_base="LIST\t2\tuser=*(a)example.domain\tservice=\toriginal-username", iov_len=61}, {iov_base="\n", iov_len=1}], 3) = 64 1646473144.294379 read(24, 0x5602069198ec, 2804) = -1 EAGAIN (Resource temporarily unavailable) 1646473144.300490 read(24, "2\tOK\n", 2804) = 5 1646473144.300556 writev(24, [{iov_base="3\t", iov_len=2}, {iov_base="LIST\t3\tuser=*(a)example.domain\tservice=\toriginal-username", iov_len=61}, {iov_base="\n", iov_len=1}], 3) = 64 1646473144.300653 read(24, 0x5602069198f1, 2799) = -1 EAGAIN (Resource temporarily unavailable) 1646473144.307687 read(24, "3\tOK\n", 2799) = 5 1646473144.307751 write(23, "DONE\t1\t\n", 8) = 8 1646473144.307944 close(24) = 0 1646473144.308092 read(23, "", 977) = 0 1646473144.308185 close(23) = 0 I also looked into the auth-userdb (auth -w) service, it seems to mirror what happens in the auth process: [pid 22387] 1646473083.407660 accept(7, <unfinished ...> [pid 22387] 1646473083.407767 <... accept resumed>{sa_family=AF_UNIX}, [28->2]) = 17 [pid 22387] 1646473084.187096 write(17, "1\t*\tuser1(a)notthat.domain\n1\t*\t [pid 22387] 1646473084.233120 write(17, "1\tOK\n", 5 <unfinished ...> [pid 22387] 1646473084.233577 epoll_ctl(9, EPOLL_CTL_ADD, 17, {EPOLLIN|EPOLLPRI|EPOLLERR|EPOLLHUP, {u32=659542480, u64=94356796068304}} <unfinished ...> [pid 22387] 1646473084.234006 read(17, <unfinished ...> [pid 22387] 1646473084.234254 <... read resumed>0x55d12753b7d1, 8031) = -1 EAGAIN (Resource temporarily unavailable) And after 60 seconds: [pid 22387] 1646473144.286843 write(17, "SHUTDOWN\n", 9 <unfinished ...> At which point the other two requests come in and are replied to. As I said above, I don't know anything about Dovecot internals but from I can gather from these outputs, all data are exchanged correctly and nothing gets stuck reading them from a permanent storage or alike. This bug doesn't manifest every time but seems to be fairly deterministic in that it always triggers for some domains but not for others. From what I've noticed, this affected domain receives all its users in single 8k read in the doveadm process, which in turns triggers (relatively) lengthy lookups and forces the auth process to put more writes on hold (at timestamp 1646473084.239108) Is it possible that when this happens, the "OK" string received from auth-userdb process (timestamp 1646473084.238938) is overlooked and auth process is waiting for more data from auth-userdb while auth-userdb waits for another request? The server itself runs Dovecot 1:2.3.13+dfsg1-2 from Debian repository on amd64. Output from dovecot --version is 2.3.13 (89f716dc2). As far as I can see, nothing indicates this is a performance problem related to insufficient hardware - server runs at 25% CPU utilization average, Pressure Stall Information reports average of 0.5% for CPU, 1% for I/O. System memory used is 10 out of 64GB. As far as I can see, no Dovecot process becomes CPU-bound when doveadm is running. I tried some web search but found nothing related to this. For our purposes, this issue has a relatively simple workaround - using doveadm quota get on specific usernames instead of the wildcard one. Since this might be an issue with a relatively easy fix for someone who knows where to look, I decided to post this bug report anyway. If needed, I should be able to test patches that apply cleanly to Debian sources and compile with dpkg-buildpackage. Thanks

1 0

Dupliate-ish email search?
by ＠lbutlr 04 Mar '22

04 Mar '22

I'm mulling over writing some code to find emails in a maildir that are duplicates, ish. That is to say that sometimes the same message doesn't quite show up as an exact match. Like some ad company may send you three identical messages, except they aren't actually EXACTLY identical, the message-IDs are different, and may the to address quoted part is different, so normal duplicate finders fail to find them. Before I start, is this a solved problem? -- I thought that they were angels, but to my surprise, we climbed aboard their starship, we headed for the skies.

3 2

Issue in 2.3.18 with fts_header_excludes/includes
by Alessio Cecchi 03 Mar '22

03 Mar '22

Hi, I'm still doing some test with fts-flatcurve, after updating to 2.3.18 I enabled: fts_header_excludes = * fts_header_includes = From To Cc Bcc Subject Message-ID but when I try to re-index all messages with FTS flatcurve the fts-flatcurve/ folder inside the Maildir/ become huge. Taking for example a Maildir with cur folder of 1.1G the related fts-flatcurve folder passed from 140M to 2.2G. After remove fts_header_excludes/includes config options, and re-index all messages, the fts-flatcurve/ size return to normal size. Is an issue? Thanks -- Alessio Cecchi Postmaster @http://www.qboxmail.it https://www.linkedin.com/in/alessice

1 1

Does disabling POP3 just mean removing it from the `protocols` list?
by Sean McBride 02 Mar '22

02 Mar '22

Hi all, Hopefully a simple question. If I want to disable POP3 support (because everyone is using IMAP anyway), it is just a matter of removing `pop3` from the `protocols` setting in dovecot.conf? Are there side effects or other considerations I should be aware of? Thanks, Sean

7 9

multiple doveadm ports?
by Joachim Lindenberg 02 Mar '22

02 Mar '22

Hello, I am trying to add another doveadm listener but am struggling with that. The primary reason is that I want to enable replication between two systems and want the replication to be encrypted using TLS. However there are also other doveadm clients locally that are not using TLS and I don´t want to touch all of them. I tried to define something like service doveadm { inet_listener { port = 2425 } inet_listener { port = 2426 ssl = true } } But didn´t get that to work. Is that not possible? I also tried service doveadm { inet_listener { port = 2425 } inet_listener http { port = 2426 ssl = yes } } but then I failed with plugin { mail_replica = https:dove2.example.com:2426 } Can someone please share what is supported and what not, or any pointer to documentation that does? Thanks a lot! Regards, Joachim

2 4

Apple Mail behaviour: can not create sub-folders
by Joseph Tam 02 Mar '22

02 Mar '22

One of my Apple Mail users recently complained his mail reader couldn't create sub-folders -- he could only create top-level folders. Playing around with this, I discovered that I could create folders ( as opposed to mialboxes) *if* I specified mailbox name with a trailing slash. Has anyone come across this? Is this related to https://doc.dovecot.org/configuration_manual/mail_location/mbox/mboxchildfo… ? Joseph Tam <jtam.home(a)gmail.com>

2 2

Re: dovecot Digest, Vol 212, Issue 56
by Korehicom 01 Mar '22

01 Mar '22

1 0

Custom Authentication Method
by Matthew R 01 Mar '22

01 Mar '22

Hi guys, we're using Dovecot/Postfix here for our mail system. I'd like to switch the `passdb` authentication on Dovecot from PAM over to a custom implementation. We'd prefer to have some sort of script check the password with an external IAM provider via HTTP. Is there any way we can accomplish this? The idea is to have Dovecot somehow call a script or send a username/password to some service, which checks the username/password against the identity provider and returns a "yes/no" back to Dovecot. `checkpassword` seems like it may work but I see no documentation on its API. Matthew R, AD, FSEN, FSO, FSCR Chief Director of Engineering & Chairman of the Board of Directors Library of Code sp-us matthew(a)staff.libraryofcode.org

3 2

General Locking & Replication Issues
by Paul Kudla (Scom.ca Internet Services Inc.) 01 Mar '22

01 Mar '22

Ok I am running two dovecot servers and feel pretty close to getting things resolved config wise there are however 2 or 3 issues that all seem to be related i have enclosed FULL config files for both mail18.scom.ca & mail19.scom.ca I have a private network that is used for the replication (10.221.0.0/24) - port 12345 is blocked by pf firewall from outside. I am running freebsd 12.1 and built one server and then raid copied it to the second (mail19) so all the ports / builds etc are identical I did start with dovecot-2.3.14 but pigeonhole would not build on freebsd (thanks for that advice / reply )until upgrade to dovecot-2.3.18 dovecot-2.3.18 was built and installed on both servers along with a good build (freebsd build error was fixed after upgrading) dovecot-2.3-pigeonhole-0.5.18 please note that the second mailserver (mail19) is on an nfs share dedicated to the server (i am awaiting sdram drives to replace this issue) but since i am getting errors on both servers i feel nfs share is not the issue (and yes i enabled dlock) mail18 is on normal sdram drives (more of an fyi as i dont think this is the issue) neither mail server is connected to the other in any kind of a shared way - other then replication postfix should be delivering via : pipe -n dovecot -t unix flags=DRhu user=vmail:vmail argv=/usr/local/libexec/dovecot/deliver -f ${sender} -d ${recipient} Replication only works properly at startup (ie the mail boxes do sync), afterwhich nothing seems to trigger the differences between the servers to update (notify i believe) manually running : [05:04:46] mail18.scom.ca [root:0] /usr/local/etc/dovecot # doveadm sync -u paul(a)scom.ca remote:10.221.0.19 & [05:21:18] mail19.scom.ca [root:0] /usr/local/etc/dovecot # doveadm sync -u paul(a)scom.ca remote:10.221.0.18 does seem to work but with mixed results. I also included postfix main.cf & master.cf as well as some googling has indicated the file locking may be on the postfix side ?? Also more then happy to donate just can not figure out how ??? so that being said : General logging errors are as follows ? [04:46:43] peer1.scom.ca [paul:0] /home/paul ## log dovecot rror Filtering by : dovecot & rror mail18 02-28 04:46:58 {dovecot} [30374] (859753649) doveadm(ed(a)scom.ca)<30486><SUtDJMGZHGIWdwAAz1jc/w>: Error: write(<local>) failed: Timed out after 60 seconds mail19 02-28 04:47:00 {dovecot} [22194] (859753669) doveadm(paul(a)scom.ca)<22219><KQzDNbyZHGLLVgAA0dxyZQ>: Error: write(<local>) failed: Timed out after 60 seconds mail18 02-28 04:47:05 {dovecot} [30374] (859753724) doveadm(ed.hanna(a)dssmgmt.com)<30484><0dYbI8G ZHGIUdwAAz1jc/w>: Error: write(<local>) failed: Timed out after 60 seconds mail18 02-28 04:47:14 {dovecot} [30374] (859753799) doveadm(paul(a)scom.ca)<30485><W/KsI8GZHGIVdwAAz1jc/w>: Error: write(<local>) failed: Timed out after 60 seconds mail18 02-28 04:47:57 {dovecot} [30374] (859754250) doveadm(paul(a)paulkudla.net)<30676></v6tIASaH GLUdwAAz1jc/w>: Error: write(<local>) failed: Timed out after 60 seconds mail18 02-28 04:49:05 {dovecot} [30374] (859754939) doveadm(keith(a)elirpa.com)<30675><aasfIASaHGL TdwAAz1jc/w>: Error: write(<local>) failed: Timed out after 60 seconds mail19 02-28 04:54:45 {dovecot} [22194] (859759457) doveadm(paul(a)paulkudla.net)<22533><m1NpN4GbH GIFWAAA0dxyZQ>: Error: write(<local>) failed: Timed out after 60 seconds mail19 02-28 04:55:07 {dovecot} [22194] (859759868) doveadm(ed(a)scom.ca)<22535><UrLTOYGbHGIHWAAA0dxyZQ>: Error: write(<local>) failed: Timed out after 60 seconds mail19 02-28 04:55:28 {dovecot} [22194] (859760130) doveadm(ed.hanna(a)dssmgmt.com)<22534><kc2dOIG bHGIGWAAA0dxyZQ>: Error: write(<local>) failed: Timed out after 60 seconds mail19 02-28 04:58:52 {dovecot} [22194] (859762842) replicator: Error: Raw backtrace: #0 fatal_handler_real[0x11370e50] -> #1 i_internal_fatal_handler[0x11370f80] -> #2 i_panic[0x112c4456] -> #3 mem_block_alloc.cold[0x112c3d0d] -> #4 t_malloc_real[0x1136a420] -> #5 pool_data_stack_realloc[0x113905f0] -> #6 buffer_alloc[0x11366060] -> #7 buffer_append[0x11366390] -> #8 replicator_queue_push[0x01026fb0] -> #9 dsync_callback[0x01026730] -> #10 dsync_callback[0x01025e60] -> #11 dsync_input[0x010 mail19 02-28 04:58:52 {dovecot} [22194] (859762844) replicator: Error: 0x11388360] -> #14 io_loop_handler_run[0x11386fb0] -> #15 io_loop_run[0x11387130] -> #16 master_service_run[0x112f9c00] -> #17 main[0x01024de0] -> #18 _start[0x01024ff0] -> #19 [unw_get_proc_name() failed: -1] mail19 02-28 04:58:55 {dovecot} [22194] (859762875) doveadm(keith(a)elirpa.com)<22532><zxU4NoGbHGI EWAAA0dxyZQ>: Error: write(<local>) failed: Timed out after 60 seconds Dovecot config for mail18.scom.ca (server - 1) [05:03:57] mail18.scom.ca [root:0] /usr/local/etc/dovecot # cat dovecot.conf # 2.3.14 (cee3cbc0d): /usr/local/etc/dovecot/dovecot.conf # OS: FreeBSD 12.1-RELEASE amd64 # Hostname: mail18.scom.ca auth_debug = no auth_debug_passwords = no mail_debug = no #lock_method = dotlock #mail_max_lock_timeout = 300s #mbox_read_locks = dotlock #mbox_write_locks = dotlock mmap_disable = yes mail_fsync = always mail_nfs_storage = yes mail_nfs_index = yes auth_mechanisms = plain login auth_verbose = yes base_dir = /data/dovecot/run/ debug_log_path = syslog disable_plaintext_auth = no dsync_features = empty-header-workaround #imapc_features = rfc822.size fetch-headers #imapc_host = mail.scom.ca #imapc_password = Pk554669 #imapc_user = paul(a)scom.ca info_log_path = syslog login_greeting = SCOM.CA Internet Services Inc. - Dovecot ready login_log_format_elements = user=<%u> method=%m rip=%r lip=%l mpid=%e %c mail_location = maildir:~/ mail_plugins = " virtual" mail_prefetch_count = 20 protocols = imap pop3 sieve mail_plugins = $mail_plugins notify replication protocol lmtp { mail_plugins = $mail_plugins notify replication sieve } protocol lda { mail_plugins = $mail_plugins notify replication sieve } namespace inbox { inbox = yes location = mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox Sent { auto = subscribe special_use = \Sent } mailbox Trash { auto = subscribe special_use = \Trash } prefix = separator = / } passdb { args = /usr/local/etc/dovecot/dovecot-pgsql.conf driver = sql } doveadm_port = 12345 doveadm_password = secretxxxx service doveadm { inet_listener { port = 12345 } } #dsync_remote_cmd = ssh -l%{login} %{host} doveadm dsync-server -u%u #dsync_remote_cmd = doveadm sync -d -u%u replication_dsync_parameters = -d -N -l 30 -U plugin { mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename mail_log_fields = uid, box, msgid, from, subject, size, vsize, flags sieve = file:~/sieve/sieve;active=~/sieve/.dovecot.sieve sieve_duplicate_default_period = 1h sieve_duplicate_max_period = 1d mail_replica = tcp:10.221.0.19 #mail_replica = remote:10.221.0.19 replication_sync_timeout = 2 } service anvil { unix_listener anvil { group = vmail mode = 0666 } } service auth { unix_listener /usr/home/postfix/private/auth { mode = 0660 user = postfix group = postfix } } service stats { unix_listener stats-reader { group = vmail mode = 0660 } unix_listener stats-writer { group = vmail mode = 0660 } } userdb { args = /usr/local/etc/dovecot/dovecot-pgsql.conf driver = sql } protocol imap { mail_max_userip_connections = 50 mail_plugins = $mail_plugins notify replication } protocol pop3 { mail_max_userip_connections = 50 mail_plugins = $mail_plugins notify replication } service managesieve-login { inet_listener sieve { port = 4190 } } verbose_proctitle = yes replication_max_conns = 10 replication_full_sync_interval = 30m service replicator { unix_listener replicator-doveadm { mode = 0666 user = vmail } } service aggregator { fifo_listener replication-notify-fifo { user = vmail } unix_listener replication-notify { user = vmail } } #Addition ssl config !include sni.conf And dovecot-pgsql.conf file (same on both servers) : driver = pgsql connect = host=localhost port=5433 dbname=scom_billing user=pgsql password=Scom411400 default_pass_scheme = PLAIN password_query = SELECT username as user, password FROM email_users WHERE username = '%u' and password <> 'alias' and status = True and destination = '%u' user_query = SELECT home, uid, gid FROM email_users WHERE username = '%u' and password <> 'alias' and status = True and destination = '%u' iterate_query = SELECT user, password FROM email_users WHERE username = '%u' and password <> 'alias' and status = True and destination = '%u' Mail 19 dovecot config file : [05:05:40] mail19.scom.ca [root:0] /usr/local/etc/dovecot # cat dovecot.conf # 2.3.14 (cee3cbc0d): /usr/local/etc/dovecot/dovecot.conf # OS: FreeBSD 12.1-RELEASE amd64 # Hostname: mail19.scom.ca auth_debug = no auth_debug_passwords = no mail_debug = no #lock_method = dotlock #mail_max_lock_timeout = 5s #mbox_read_locks = dotlock #mbox_write_locks = dotlock mmap_disable = yes mail_fsync = always mail_nfs_storage = yes mail_nfs_index = yes auth_mechanisms = plain login auth_verbose = yes base_dir = /data/dovecot/run/ debug_log_path = syslog disable_plaintext_auth = no dsync_features = empty-header-workaround #imapc_features = rfc822.size fetch-headers #imapc_host = mail.scom.ca #imapc_password = Pk554669 #imapc_user = paul(a)scom.ca info_log_path = syslog login_greeting = SCOM.CA Internet Services Inc. - Dovecot ready login_log_format_elements = user=<%u> method=%m rip=%r lip=%l mpid=%e %c mail_location = maildir:~/ mail_plugins = " virtual" mail_prefetch_count = 20 mail_plugins = $mail_plugins notify replication protocols = imap pop3 sieve protocol lmtp { mail_plugins = $mail_plugins notify replication sieve } protocol lda { mail_plugins = $mail_plugins notify replication sieve } namespace inbox { inbox = yes location = mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox Sent { auto = subscribe special_use = \Sent } mailbox Trash { auto = subscribe special_use = \Trash } prefix = separator = / } passdb { args = /usr/local/etc/dovecot/dovecot-pgsql.conf driver = sql } doveadm_port = 12345 doveadm_password = secretxxxx service doveadm { inet_listener { port = 12345 } } #dsync_remote_cmd = ssh -l%{login} %{host} doveadm dsync-server -u%u #dsync_remote_cmd = doveadm sync -d -u%u replication_dsync_parameters = -d -N -l 30 -U plugin { mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename mail_log_fields = uid, box, msgid, from, subject, size, vsize, flags sieve = file:~/sieve/sieve;active=~/sieve/.dovecot.sieve sieve_duplicate_default_period = 1h sieve_duplicate_max_period = 1d mail_replica = tcp:10.221.0.18 #mail_replica = remote:vmail@10.221.0.18 replication_sync_timeout = 2 } service anvil { unix_listener anvil { group = vmail mode = 0666 } } service auth { unix_listener /usr/home/postfix/private/auth { mode = 0660 user = postfix group = postfix } } service stats { unix_listener stats-reader { group = vmail mode = 0660 } unix_listener stats-writer { group = vmail mode = 0660 } } userdb { args = /usr/local/etc/dovecot/dovecot-pgsql.conf driver = sql } protocol imap { mail_max_userip_connections = 50 mail_plugins = $mail_plugins notify replication } protocol pop3 { mail_max_userip_connections = 50 mail_plugins = $mail_plugins notify replication } service managesieve-login { inet_listener sieve { port = 4190 } } verbose_proctitle = yes replication_max_conns = 10 replication_full_sync_interval = 30m service replicator { unix_listener replicator-doveadm { mode = 0666 user = vmail } } service aggregator { fifo_listener replication-notify-fifo { user = vmail } unix_listener replication-notify { user = vmail } } service replicator { unix_listener replicator-doveadm { mode = 0600 user = vmail } } replication_dsync_parameters = -d -N -l 30 -U #Addition ssl config !include sni.conf sni.conf file (same on both servers) : #sni.conf ssl = yes verbose_ssl = yes ssl_dh =</usr/local/etc/dovecot/dh-4096.pem ssl_prefer_server_ciphers = yes #ssl_min_protocol = TLSv1.2 #Default *.scom.ca ssl_key =</usr/local/etc/dovecot/scom.pem ssl_cert =</usr/local/etc/dovecot/scom.pem ssl_ca =</usr/local/etc/dovecot/scom.pem local_name .scom.ca { ssl_key = /programs/common/getssl.cert -c *.scom.ca -q yes ssl_cert = /programs/common/getssl.cert -c *.scom.ca -q yes ssl_ca = /programs/common/getssl.cert -c *.scom.ca -q yes } local_name mail.clancyca.com { ssl_key = /programs/common/getssl.cert -c mail.clancyca.com -q yes ssl_cert = /programs/common/getssl.cert -c mail.clancyca.com -q yes ssl_ca = /programs/common/getssl.cert -c mail.clancyca.com -q yes } local_name secure.clancyca.com { ssl_key = /programs/common/getssl.cert -c secure.clancyca.com -q yes ssl_cert = /programs/common/getssl.cert -c secure.clancyca.com -q yes ssl_ca = /programs/common/getssl.cert -c secure.clancyca.com -q yes } local_name mail.paulkudla.net { ssl_key = /programs/common/getssl.cert -c mail.paulkudla.net -q yes ssl_cert = /programs/common/getssl.cert -c mail.paulkudla.net -q yes ssl_ca = /programs/common/getssl.cert -c mail.paulkudla.net -q yes } local_name mail.ekst.ca { ssl_key = /programs/common/getssl.cert -c mail.ekst.ca -q yes ssl_cert = /programs/common/getssl.cert -c mail.ekst.ca -q yes ssl_ca = /programs/common/getssl.cert -c mail.ekst.ca -q yes } local_name mail.hamletdevelopments.ca { ssl_key = /programs/common/getssl.cert -c mail.hamletdevelopments.ca -q yes ssl_cert = /programs/common/getssl.cert -c mail.hamletdevelopments.ca -q yes ssl_ca = /programs/common/getssl.cert -c mail.hamletdevelopments.ca -q yes } Postfix main.cf (same on both servers) [05:15:03] mail19.scom.ca [root:0] /usr/home/postfix.local/config # cat main.cf # Global Postfix configuration file. This file lists only a subset # of all parameters. For the syntax, and for a complete parameter # list, see the postconf(5) manual page (command: "man 5 postconf"). # # For common configuration examples, see BASIC_CONFIGURATION_README # and STANDARD_CONFIGURATION_README. To find these documents, use # the command "postconf html_directory readme_directory", or go to # http://www.postfix.org/. # # For best results, change no more than 2-3 parameters at a time, # and test if Postfix still works after every change. alternate_config_directories = /usr/home/postfix/config data_directory = /var/lib/postfix.local maillog_file = /var/log/postfix.local compatibility_level=2 #compatibility_level=3.6 # SOFT BOUNCE # # The soft_bounce parameter provides a limited safety net for # testing. When soft_bounce is enabled, mail will remain queued that # would otherwise bounce. This parameter disables locally-generated # bounces, and prevents the SMTP server from rejecting mail permanently # (by changing 5xx replies into 4xx replies). However, soft_bounce # is no cure for address rewriting mistakes or mail routing mistakes. # soft_bounce = no #relayhost = 216.106.96.23 # LOCAL PATHNAME INFORMATION # # The queue_directory specifies the location of the Postfix queue. # This is also the root directory of Postfix daemons that run chrooted. # See the files in examples/chroot-setup for setting up Postfix chroot # environments on different UNIX systems. # queue_directory = /usr/home/postfix.local # The command_directory parameter specifies the location of all # postXXX commands. # command_directory = /usr/local/sbin # The daemon_directory parameter specifies the location of all Postfix # daemon programs (i.e. programs listed in the master.cf file). This # directory must be owned by root. # daemon_directory = /usr/local/libexec/postfix # QUEUE AND PROCESS OWNERSHIP # # The mail_owner parameter specifies the owner of the Postfix queue # and of most Postfix daemon processes. Specify the name of a user # account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS # AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In # particular, don't specify nobody or daemon. PLEASE USE A DEDICATED # USER. # mail_owner = postfix # The default_privs parameter specifies the default rights used by # the local delivery agent for delivery to external file or command. # These rights are used in the absence of a recipient user context. # DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER. # #default_privs = nobody # INTERNET HOST AND DOMAIN NAMES # # The myhostname parameter specifies the internet hostname of this # mail system. The default is to use the fully-qualified domain name # from gethostname(). $myhostname is used as a default value for many # other configuration parameters. # #myhostname = localhost myhostname = mail19.scom.ca # The mydomain parameter specifies the local internet domain name. # The default is to use $myhostname minus the first component. # $mydomain is used as a default value for many other configuration # parameters. # #mydomain = localhost mydomain = mail19.scom.ca # SENDING MAIL # # The myorigin parameter specifies the domain that locally-posted # mail appears to come from. The default is to append $myhostname, # which is fine for small sites. If you run a domain with multiple # machines, you should (1) change this to $mydomain and (2) set up # a domain-wide alias database that aliases each user to # user(a)that.users.mailhost. # # For the sake of consistency between sender and recipient addresses, # myorigin also specifies the default domain name that is appended # to recipient addresses that have no @domain part. # myorigin = $myhostname #myorigin = $mydomain # RECEIVING MAIL # The inet_interfaces parameter specifies the network interface # addresses that this mail system receives mail on. By default, # the software claims all active interfaces on the machine. The # parameter also controls delivery of mail to user(a)[ip.address]. # # See also the proxy_interfaces parameter, for network addresses that # are forwarded to us via a proxy or network address translator. # # Note: you need to stop/start Postfix when this parameter changes. # inet_interfaces = 127.0.0.1 #inet_interfaces = $myhostname #inet_interfaces = $myhostname, localhost, 76.74.132.2 #inet_interfaces = mail.dsl.scom.ca, dsl.scom.ca # The proxy_interfaces parameter specifies the network interface # addresses that this mail system receives mail on by way of a # proxy or network address translation unit. This setting extends # the address list specified with the inet_interfaces parameter. # # You must specify your proxy/NAT addresses when your system is a # backup MX host for other domains, otherwise mail delivery loops # will happen when the primary MX host is down. # #proxy_interfaces = #proxy_interfaces = 1.2.3.4 # The mydestination parameter specifies the list of domains that this # machine considers itself the final destination for. # # These domains are routed to the delivery agent specified with the # local_transport parameter setting. By default, that is the UNIX # compatible delivery agent that lookups all recipients in /etc/passwd # and /etc/aliases or their equivalent. # # The default is $myhostname + localhost.$mydomain. On a mail domain # gateway, you should also include $mydomain. # # Do not specify the names of virtual domains - those domains are # specified elsewhere (see VIRTUAL_README). # # Do not specify the names of domains that this machine is backup MX # host for. Specify those names via the relay_domains settings for # the SMTP server, or use permit_mx_backup if you are lazy (see # STANDARD_CONFIGURATION_README). # # The local machine is always the final destination for mail addressed # to user(a)[the.net.work.address] of an interface that the mail system # receives mail on (see the inet_interfaces parameter). # # Specify a list of host or domain names, /file/name or type:table # patterns, separated by commas and/or whitespace. A /file/name # pattern is replaced by its contents; a type:table is matched when # a name matches a lookup key (the right-hand side is ignored). # Continue long lines by starting the next line with whitespace. # # See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS". # #mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain #mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain, # mail.$mydomain, www.$mydomain, ftp.$mydomain # REJECTING MAIL FOR UNKNOWN LOCAL USERS # # The local_recipient_maps parameter specifies optional lookup tables # with all names or addresses of users that are local with respect # to $mydestination, $inet_interfaces or $proxy_interfaces. # # If this parameter is defined, then the SMTP server will reject # mail for unknown local users. This parameter is defined by default. # # To turn off local recipient checking in the SMTP server, specify # local_recipient_maps = (i.e. empty). # # The default setting assumes that you use the default Postfix local # delivery agent for local delivery. You need to update the # local_recipient_maps setting if: # # - You define $mydestination domain recipients in files other than # /etc/passwd, /etc/aliases, or the $virtual_alias_maps files. # For example, you define $mydestination domain recipients in # the $virtual_mailbox_maps files. # # - You redefine the local delivery agent in master.cf. # # - You redefine the "local_transport" setting in main.cf. # # - You use the "luser_relay", "mailbox_transport", or "fallback_transport" # feature of the Postfix local delivery agent (see local(8)). # # Details are described in the LOCAL_RECIPIENT_README file. # # Beware: if the Postfix SMTP server runs chrooted, you probably have # to access the passwd file via the proxymap service, in order to # overcome chroot restrictions. The alternative, having a copy of # the system passwd file in the chroot jail is just not practical. # # The right-hand side of the lookup tables is conveniently ignored. # In the left-hand side, specify a bare username, an @domain.tld # wild-card, or specify a user(a)domain.tld address. # local_recipient_maps = unix:passwd.byname $alias_maps #local_recipient_maps = proxy:unix:passwd.byname $alias_maps #local_recipient_maps = # The unknown_local_recipient_reject_code specifies the SMTP server # response code when a recipient domain matches $mydestination or # ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty # and the recipient address or address local-part is not found. # # The default setting is 550 (reject mail) but it is safer to start # with 450 (try again later) until you are certain that your # local_recipient_maps settings are OK. # #unknown_local_recipient_reject_code = 450 #Set by Mailscanner # TRUST AND RELAY CONTROL # The mynetworks parameter specifies the list of "trusted" SMTP # clients that have more privileges than "strangers". # # In particular, "trusted" SMTP clients are allowed to relay mail # through Postfix. See the smtpd_recipient_restrictions parameter # in postconf(5). # # You can specify the list of "trusted" network addresses by hand # or you can let Postfix do it for you (which is the default). # # By default (mynetworks_style = subnet), Postfix "trusts" SMTP # clients in the same IP subnetworks as the local machine. # On Linux, this does works correctly only with interfaces specified # with the "ifconfig" command. # # Specify "mynetworks_style = class" when Postfix should "trust" SMTP # clients in the same IP class A/B/C networks as the local machine. # Don't do this with a dialup site - it would cause Postfix to "trust" # your entire provider's network. Instead, specify an explicit # mynetworks list by hand, as described below. # # Specify "mynetworks_style = host" when Postfix should "trust" # only the local machine. # #mynetworks_style = class #mynetworks_style = subnet #mynetworks_style = host # Alternatively, you can specify the mynetworks list by hand, in # which case Postfix ignores the mynetworks_style setting. # # Specify an explicit list of network/netmask patterns, where the # mask specifies the number of bits in the network part of a host # address. # # You can also specify the absolute pathname of a pattern file instead # of listing the patterns here. Specify type:table for table-based lookups # (the value on the table right-hand side is not used). # mynetworks = 127.0.0.0/8 65.39.148.0/26 10.220.0.0/16 10.221.0.0/16 #mynetworks = $config_directory/mynetworks #mynetworks = hash:/usr/local/etc/postfix/network_table # The relay_domains parameter restricts what destinations this system will # relay mail to. See the smtpd_recipient_restrictions description in # postconf(5) for detailed information. # # By default, Postfix relays mail # - from "trusted" clients (IP address matches $mynetworks) to any destination, # - from "untrusted" clients to destinations that match $relay_domains or # subdomains thereof, except addresses with sender-specified routing. # The default relay_domains value is $mydestination. # # In addition to the above, the Postfix SMTP server by default accepts mail # that Postfix is final destination for: # - destinations that match $inet_interfaces or $proxy_interfaces, # - destinations that match $mydestination # - destinations that match $virtual_alias_domains, # - destinations that match $virtual_mailbox_domains. # These destinations do not need to be listed in $relay_domains. # # Specify a list of hosts or domains, /file/name patterns or type:name # lookup tables, separated by commas and/or whitespace. Continue # long lines by starting the next line with whitespace. A file name # is replaced by its contents; a type:name table is matched when a # (parent) domain appears as lookup key. # # NOTE: Postfix will not automatically forward mail for domains that # list this system as their primary or backup MX host. See the # permit_mx_backup restriction description in postconf(5). # relay_domains = $mydestination # INTERNET OR INTRANET # The relayhost parameter specifies the default host to send mail to # when no entry is matched in the optional transport(5) table. When # no relayhost is given, mail is routed directly to the destination. # # On an intranet, specify the organizational domain name. If your # internal DNS uses no MX records, specify the name of the intranet # gateway host instead. # # In the case of SMTP, specify a domain, host, host:port, [host]:port, # [address] or [address]:port; the form [host] turns off MX lookups. # # If you're connected via UUCP, see also the default_transport parameter. # #relayhost = [gateway.my.domain] #relayhost = [mailserver.isp.tld] #relayhost = uucphost #relayhost = [an.ip.add.ress] # REJECTING UNKNOWN RELAY USERS # # The relay_recipient_maps parameter specifies optional lookup tables # with all addresses in the domains that match $relay_domains. # # If this parameter is defined, then the SMTP server will reject # mail for unknown relay users. This feature is off by default. # # The right-hand side of the lookup tables is conveniently ignored. # In the left-hand side, specify an @domain.tld wild-card, or specify # a user(a)domain.tld address. # #relay_recipient_maps = hash:/usr/local/etc/postfix/relay_recipients # INPUT RATE CONTROL # # The in_flow_delay configuration parameter implements mail input # flow control. This feature is turned on by default, although it # still needs further development (it's disabled on SCO UNIX due # to an SCO bug). # # A Postfix process will pause for $in_flow_delay seconds before # accepting a new message, when the message arrival rate exceeds the # message delivery rate. With the default 100 SMTP server process # limit, this limits the mail inflow to 100 messages a second more # than the number of messages delivered per second. # # Specify 0 to disable the feature. Valid delays are 0..10. # #in_flow_delay = 1s # ADDRESS REWRITING # # The ADDRESS_REWRITING_README document gives information about # address masquerading or other forms of address rewriting including # username->Firstname.Lastname mapping. # ADDRESS REDIRECTION (VIRTUAL DOMAIN) # # The VIRTUAL_README document gives information about the many forms # of domain hosting that Postfix supports. # "USER HAS MOVED" BOUNCE MESSAGES # # See the discussion in the ADDRESS_REWRITING_README document. # TRANSPORT MAP # # See the discussion in the ADDRESS_REWRITING_README document. # ALIAS DATABASE # # The alias_maps parameter specifies the list of alias databases used # by the local delivery agent. The default list is system dependent. # # On systems with NIS, the default is to search the local alias # database, then the NIS alias database. See aliases(5) for syntax # details. # # If you change the alias database, run "postalias /etc/aliases" (or # wherever your system stores the mail alias file), or simply run # "newaliases" to build the necessary DBM or DB file. # # It will take a minute or so before changes become visible. Use # "postfix reload" to eliminate the delay. # #alias_maps = dbm:/etc/aliases alias_maps = hash:/usr/home/postfix/config/aliases #alias_maps = hash:/etc/aliases, nis:mail.aliases #alias_maps = netinfo:/aliases # The alias_database parameter specifies the alias database(s) that # are built with "newaliases" or "sendmail -bi". This is a separate # configuration parameter, because alias_maps (see above) may specify # tables that are not necessarily all under control by Postfix. # #alias_database = dbm:/etc/aliases #alias_database = dbm:/etc/mail/aliases alias_database = hash:/etc/postfix/aliases #alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases # ADDRESS EXTENSIONS (e.g., user+foo) # # The recipient_delimiter parameter specifies the separator between # user names and address extensions (user+foo). See canonical(5), # local(8), relocated(5) and virtual(5) for the effects this has on # aliases, canonical, virtual, relocated and .forward file lookups. # Basically, the software tries user+foo and .forward+foo before # trying user and .forward. # recipient_delimiter = + # DELIVERY TO MAILBOX # # The home_mailbox parameter specifies the optional pathname of a # mailbox file relative to a user's home directory. The default # mailbox file is /var/spool/mail/user or /var/mail/user. Specify # "Maildir/" for qmail-style delivery (the / is required). # #home_mailbox = Mailbox #home_mailbox = Maildir/ # The mail_spool_directory parameter specifies the directory where # UNIX-style mailboxes are kept. The default setting depends on the # system type. # #mail_spool_directory = /var/mail # The mailbox_command parameter specifies the optional external # command to use instead of mailbox delivery. The command is run as # the recipient with proper HOME, SHELL and LOGNAME environment settings. # Exception: delivery for root is done as $default_user. # # Other environment variables of interest: USER (recipient username), # EXTENSION (address extension), DOMAIN (domain part of address), # and LOCAL (the address localpart). # # Unlike other Postfix configuration parameters, the mailbox_command # parameter is not subjected to $parameter substitutions. This is to # make it easier to specify shell syntax (see example below). # # Avoid shell meta characters because they will force Postfix to run # an expensive shell process. Procmail alone is expensive enough. # # IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN # ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER. # #mailbox_command = /some/where/procmail #mailbox_command = /some/where/procmail -a "$EXTENSION" # The mailbox_transport specifies the optional transport in master.cf # to use after processing aliases and .forward files. This parameter # has precedence over the mailbox_command, fallback_transport and # luser_relay parameters. # # Specify a string of the form transport:nexthop, where transport is # the name of a mail delivery transport defined in master.cf. The # :nexthop part is optional. For more details see the sample transport # configuration file. # # NOTE: if you use this feature for accounts not in the UNIX password # file, then you must update the "local_recipient_maps" setting in # the main.cf file, otherwise the SMTP server will reject mail for # non-UNIX accounts with "User unknown in local recipient table". # mailbox_transport = dovecot # The fallback_transport specifies the optional transport in master.cf # to use for recipients that are not found in the UNIX passwd database. # This parameter has precedence over the luser_relay parameter. # # Specify a string of the form transport:nexthop, where transport is # the name of a mail delivery transport defined in master.cf. The # :nexthop part is optional. For more details see the sample transport # configuration file. # # NOTE: if you use this feature for accounts not in the UNIX password # file, then you must update the "local_recipient_maps" setting in # the main.cf file, otherwise the SMTP server will reject mail for # non-UNIX accounts with "User unknown in local recipient table". # #fallback_transport = lmtp:unix:/file/name #fallback_transport = cyrus #fallback_transport = # The luser_relay parameter specifies an optional destination address # for unknown recipients. By default, mail for unknown@$mydestination, # unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned # as undeliverable. # # The following expansions are done on luser_relay: $user (recipient # username), $shell (recipient shell), $home (recipient home directory), # $recipient (full recipient address), $extension (recipient address # extension), $domain (recipient domain), $local (entire recipient # localpart), $recipient_delimiter. Specify ${name?value} or # ${name:value} to expand value only when $name does (does not) exist. # # luser_relay works only for the default Postfix local delivery agent. # # NOTE: if you use this feature for accounts not in the UNIX password # file, then you must specify "local_recipient_maps =" (i.e. empty) in # the main.cf file, otherwise the SMTP server will reject mail for # non-UNIX accounts with "User unknown in local recipient table". # #luser_relay = $user(a)other.host #luser_relay = $local(a)other.host #luser_relay = admin+$local # JUNK MAIL CONTROLS # # The controls listed here are only a very small subset. The file # SMTPD_ACCESS_README provides an overview. # The header_checks parameter specifies an optional table with patterns # that each logical message header is matched against, including # headers that span multiple physical lines. # # By default, these patterns also apply to MIME headers and to the # headers of attached messages. With older Postfix versions, MIME and # attached message headers were treated as body text. # # For details, see "man header_checks". # #header_checks = regexp:/usr/local/etc/postfix/header_checks #Divert to Hold Queue #header_checks = regexp:/etc/postfix/header_checks # FAST ETRN SERVICE # # Postfix maintains per-destination logfiles with information about # deferred mail, so that mail can be flushed quickly with the SMTP # "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld". # See the ETRN_README document for a detailed description. # # The fast_flush_domains parameter controls what destinations are # eligible for this service. By default, they are all domains that # this server is willing to relay mail to. # #fast_flush_domains = $relay_domains # SHOW SOFTWARE VERSION OR NOT # # The smtpd_banner parameter specifies the text that follows the 220 # code in the SMTP server's greeting banner. Some people like to see # the mail version advertised. By default, Postfix shows no version. # # You MUST specify $myhostname at the start of the text. That is an # RFC requirement. Postfix itself does not care. # #smtpd_banner = $myhostname ESMTP $mail_name #smtpd_banner = $myhostname ESMTP $mail_name ($mail_version) # PARALLEL DELIVERY TO THE SAME DESTINATION # # How many parallel deliveries to the same user or domain? With local # delivery, it does not make sense to do massively parallel delivery # to the same user, because mailbox updates must happen sequentially, # and expensive pipelines in .forward files can cause disasters when # too many are run at the same time. With SMTP deliveries, 10 # simultaneous connections to the same domain could be sufficient to # raise eyebrows. # # Each message delivery transport has its XXX_destination_concurrency_limit # parameter. The default is $default_destination_concurrency_limit for # most delivery transports. For the local delivery agent the default is 2. #local_destination_concurrency_limit = 1 #2 #default_destination_concurrency_limit = 100 #20 # DEBUGGING CONTROL # # The debug_peer_level parameter specifies the increment in verbose # logging level when an SMTP client or server host name or address # matches a pattern in the debug_peer_list parameter. # debug_peer_level = 9 # The debug_peer_list parameter specifies an optional list of domain # or network patterns, /file/name patterns or type:name tables. When # an SMTP client or server host name or address matches a pattern, # increase the verbose logging level by the amount specified in the # debug_peer_level parameter. # #debug_peer_list = 127.0.0.1 #debug_peer_list = some.domain # The debugger_command specifies the external command that is executed # when a Postfix daemon program is run with the -D option. # # Use "command .. & sleep 5" so that the debugger can attach before # the process marches on. If you use an X-based debugger, be sure to # set up your XAUTHORITY environment variable before starting Postfix. # debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin xxgdb $daemon_directory/$process_name $process_id & sleep 5 # If you can't use X, use this to capture the call stack when a # daemon crashes. The result is in a file in the configuration # directory, and is named after the process name and the process ID. # # debugger_command = # PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont; # echo where) | gdb $daemon_directory/$process_name $process_id 2>&1 # >$config_directory/$process_name.$process_id.log & sleep 5 # # Another possibility is to run gdb under a detached screen session. # To attach to the screen sesssion, su root and run "screen -r # <id_string>" where <id_string> uniquely matches one of the detached # sessions (from "screen -list"). # # debugger_command = # PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen # -dmS $process_name gdb $daemon_directory/$process_name # $process_id & sleep 1 # INSTALL-TIME CONFIGURATION INFORMATION # # The following parameters are used when installing a new Postfix version. # # sendmail_path: The full pathname of the Postfix sendmail command. # This is the Sendmail-compatible mail posting interface. # sendmail_path = /usr/local/sbin/sendmail # newaliases_path: The full pathname of the Postfix newaliases command. # This is the Sendmail-compatible command to build alias databases. # newaliases_path = /usr/local/bin/newaliases # mailq_path: The full pathname of the Postfix mailq command. This # is the Sendmail-compatible mail queue listing command. # mailq_path = /usr/local/bin/mailq # setgid_group: The group for mail submission and queue management # commands. This must be a group name with a numerical group ID that # is not shared with other accounts, not even with the Postfix account. # setgid_group = maildrop # html_directory: The location of the Postfix HTML documentation. # html_directory = no # manpage_directory: The location of the Postfix on-line manual pages. # manpage_directory = /usr/local/man # sample_directory: The location of the Postfix sample configuration files. # This parameter is obsolete as of Postfix 2.1. # #sample_directory = /usr/local/etc/postfix # readme_directory: The location of the Postfix README files. # #readme_directory = no #Auth Stuff smtpd_sasl_auth_enable = yes broken_sasl_auth_clients = yes smtpd_sasl_security_options = noanonymous smtpd_sasl_authenticated_header = yes smtpd_sasl_local_domain = $myhostname smtpd_sasl_path = smtpd smtpd_recipient_restrictions = permit_sasl_authenticated, permit_mynetworks reject_unauth_destination, #check_policy_service unix:private/policyd-spf #TLS Stuff #TLS Stuff #smtpd_tls_mandatory_protocols = !SSLv2,!SSLv3,!TLSv1 #smtp_tls_mandatory_protocols = !SSLv2,!SSLv3,!TLSv1 #smtpd_tls_protocols = !SSLv2,!SSLv3,!TLSv1 #smtp_tls_protocols = !SSLv2,!SSLv3,!TLSv1 smtpd_tls_exclude_ciphers = RC4, aNULL smtpd_tls_ask_ccert = yes smtpd_tls_security_level = may smtp_tls_security_level = may smtpd_tls_req_ccert = no smtpd_tls_auth_only = no smtpd_tls_loglevel = 2 smtp_tls_loglevel = 2 smtpd_use_tls = yes smtp_tls_chain_files = /etc/ssl/.scom.ca smtp_use_tls = yes smtp_tls_chain_files = /etc/ssl/.scom.ca smtpd_tls_session_cache_database = btree:${queue_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${queue_directory}/smtp_scache smtp_tls_CApath = /etc/ssl/certs smtpd_tls_CApath = /etc/ssl/certs #Sort out hard bounce to softbounce smtp_reply_filter = pcre:/usr/home/postfix.local/config/smtp_5xx_to_4xx #General Options delay_warning_time = 1h mailbox_size_limit = 0 message_size_limit = 1000000000 #Mailscanner Options #header_checks = regexp:/usr/local/etc/postfix/header_checks unknown_local_recipient_reject_code = 550 #Dovecot stuff #Postgres Stuff #Temp off till i am a mail server mydestination = pgsql:/usr/home/postfix/config/pgsql-mydestination.cf virtual_maps=pgsql:/usr/home/postfix/config/pgsql-virtual.cf #Dovecot Stuff? dovecot_destination_recipient_limit = 1 virtual_transport = dovecot #Spf filter #policy_time_limit = 3600 #Other restrictions strict_rfc821_envelopes = yes smtpd_client_connection_count_limit = 1000 default_process_limit = 100 #minimal_backoff_time = 300s #maximal_backoff_time = 600s #queue_run_delay = 300s #Duplicate suppresion #enable_original_recipient = no #smtpd_discard_ehlo_keywords = silent-discard, dsn milter_default_action = accept milter_protocol = 6 smtpd_milters = inet:localhost:8891 non_smtpd_milters = inet:localhost:8891 #virtual_mailbox_lock = dotlock Postfix Master.cf : [05:16:09] mail19.scom.ca [root:0] /usr/home/postfix.local/config # cat master.cf # # Postfix master process configuration file. For details on the format # of the file, see the master(5) manual page (command: "man 5 master"). # # Do not forget to execute "postfix reload" after editing this file. # # ========================================================================== # service type private unpriv chroot wakeup maxproc command + args # (yes) (yes) (yes) (never) (100) # ========================================================================== #smtp inet n - n - - smtpd #submission inet n - n - - smtpd #465 inet n - n - - smtpd #995 inet n - n - - smtpd 61220 inet n - n - - smtpd # -o smtpd_tls_security_level=encrypt # -o smtpd_sasl_auth_enable=yes # -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #smtps inet n - n - - smtpd # -o smtpd_tls_wrappermode=yes # -o smtpd_sasl_auth_enable=yes # -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #628 inet n - n - - qmqpd pickup fifo n - n 60 1 pickup cleanup unix n - n - 0 cleanup qmgr fifo n - n 300 1 qmgr #qmgr fifo n - n 300 1 oqmgr tlsmgr unix - - n 1000? 1 tlsmgr rewrite unix - - n - - trivial-rewrite bounce unix - - n - 0 bounce defer unix - - n - 0 bounce trace unix - - n - 0 bounce verify unix - - n - 1 verify flush unix n - n 1000? 0 flush proxymap unix - - n - - proxymap proxywrite unix - - n - 1 proxymap smtp unix - - n - - smtp # When relaying mail as backup MX, disable fallback_relay to avoid MX loops relay unix - - n - - smtp -o smtp_fallback_relay= # -o smtp_helo_timeout=5 -o smtp_connect_timeout=5 showq unix n - n - - showq error unix - - n - - error retry unix - - n - - error discard unix - - n - - discard local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - n - - lmtp anvil unix - - n - 1 anvil scache unix - - n - 1 scache # # ==================================================================== # Interfaces to non-Postfix software. Be sure to examine the manual # pages of the non-Postfix software to find out what options it wants. # # Many of the following services use the Postfix pipe(8) delivery # agent. See the pipe(8) man page for information about ${recipient} # and other message envelope options. # ==================================================================== # # maildrop. See the Postfix MAILDROP_README file for details. # Also specify in main.cf: maildrop_destination_recipient_limit=1 # #maildrop unix - n n - - pipe # flags=DRhu user=vmail argv=/usr/local/bin/maildrop -d ${recipient} # # ==================================================================== # # The Cyrus deliver program has changed incompatibly, multiple times. # #old-cyrus unix - n n - - pipe # flags=R user=cyrus argv=/usr/local/cyrus/bin/deliver -e -m ${extension} ${user} # # ==================================================================== # # Cyrus 2.1.5 (Amos Gouaux) # Also specify in main.cf: cyrus_destination_recipient_limit=1 # #cyrus unix - n n - - pipe # user=cyrus argv=/usr/local/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${recipient} # # ==================================================================== # # See the Postfix UUCP_README file for configuration details. # #uucp unix - n n - - pipe # flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient) # # ==================================================================== # # Other external delivery methods. # #ifmail unix - n n - - pipe # flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient) # #bsmtp unix - n n - - pipe # flags=Fq. user=bsmtp argv=/usr/local/sbin/bsmtp -f $sender $nexthop $recipient # #scalemail-backend unix - n n - 2 pipe # flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store # ${nexthop} ${user} ${extension} # #mailman unix - n n - - pipe # flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py # ${nexthop} ${user} dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/local/libexec/dovecot/deliver -f ${sender} -d ${recipient} policyd-spf unix - n n - - spawn user=nobody argv=/usr/local/bin/policyd-spf postlog unix-dgram n - n - 1 postlogd -- Happy Monday !!! Thanks - paul Paul Kudla Scom.ca Internet Services <http://www.scom.ca> 004-1009 Byron Street South Whitby, Ontario - Canada L1N 4S3 Toronto 416.642.7266 Main 1.866.411.7266 Fax 1.888.892.7266

2 1

Build with MySQL -> libmysqlclient not found
by Dimitri 28 Feb '22

28 Feb '22

> John: > > ./configure --help > > might also be a good idea, I think it might have some options like: > > --mysql-libs=/path/to/lib > --mysql-includes=/path/to/include > > or something similiar to use. Unfortunately not, just the "--with-mysql" Option. > Oscar: > > You might need CPPFLAGS as well. (e.g. CPPFLAGS="-I/test/core/mariadb/include") > Check also "config.log" for errors. I had already done both, just forgot to mention it. But i should have looked further. Near the end of config.log is saw: ================================ > | /* Override any GCC internal prototype to avoid an error. > | Use char because int might match the return type of a GCC > | builtin and then its argument prototype would still apply. */ > | #ifdef __cplusplus > | extern "C" > | #endif > | char mysql_init (); > | int > | main () > | { > | return mysql_init (); > | ; > | return 0; > | } > configure:23386: result: noconfigure:23520: error: Can't build with MySQL support: libmysqlclient not found ================================ and thought that wouldn't help me. Now i looked again but further up an saw: ================================ > configure:23377: gcc -o conftest -std=gnu99 -g -O2 -fstack-protector-strong -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -mfunction-return=keep -mindirect-branch=keep -Wall -W -Wmissing-prototypes -Wmissing-declarations> ... > /usr/bin/ld: cannot find -lzcollect2: error: ld returned 1 exit status ================================ Zlib i have (of course ;) ) also compiled from source. After adding "/test/dep/zlib/include" to CPPFLAGS and "/test/dep/zlib/lib" to LDFLAGS the configuration runs without errors. However i don't understand why the configuration-script takes the non-standard path for openssl automatically and correctly from the PKG_CONFIG_PATH, but the paths to my zlib and mariadb installations, which i also set in PKG_CONFIG_PATH not...

3 3

Build with MySQL -> libmysqlclient not found
by Dimitri 28 Feb '22

28 Feb '22

Hi folks, just step into another problem and don't know why? If i try to configure dovecot with the following: > ./configure --prefix=/test/core/dovecot --with-ssldir=/test/core/dovecot/tls --with-mysql i get > ... > checking for auth_userokay... no > checking for mysql_config... NO > checking for mysql_init in -lmysqlclient... noconfigure: error: Can't build with MySQL support: libmysqlclient not found After that i've tried to configure with following: > LDFLAGS="-L/test/core/mariadb/lib" ./configure --prefix=/test/core/dovecot --with-ssldir=/test/core/dovecot/tls --with-mysql but with same result. The Content of "/test/core/mariadb/lib" is: libmariadbclient.a libmariadb.so -> libmariadb.so.3 libmariadb.so.3 libmysqlclient.a -> libmariadbclient.a libmysqlclient_r.a -> libmariadbclient.a libmysqlclient_r.so -> libmariadb.so.3 libmysqlclient.so -> libmariadb.so.3 libmysqlservices.a pkgconfigplugin Also the Path "/test/core/mariadb/lib/pkgconfig" is in the PKG_CONFIG_PATH variable and the Library-Path "/test/core/mariadb/lib" is known by the dynamic linker (/etc/ld.so.conf.d/mylibs.conf). So what am i doing wrong? My Dovecot version: 2.3.18 My Mariadb version: 10.6.5 My OS: Ubuntu 20.04

4 4

Build with MySQL -> libmysqlclient not found
by Dimitri 27 Feb '22

27 Feb '22

> Why aren't you just using the Ubuntu 20.04 packaged version instead? > > Also, did you install the headers for libmysqlclient properly as > > well? > > What does /test/core/mariadb/includes/ or > > /test/core/includes/... show? Hi John, i just want to manage all the software manually, use own directorie-structur and have all the programs in one place, deepen my understanding how these programs work and build these programs only with the components i need. The content of "/test/core/mariadb/include/mysql" is: > errmsg.h > ma_list.h > ma_pvio.h > mariadb/ > mariadb/ma_io.h > mariadb_com.h > mariadb_ctype.h > mariadb_dyncol.h > mariadb_rpl.h > mariadb_stmt.h > mariadb_version.h > ma_tls.h > my_config.h > my_global.h > mysql/ > mysql/client_plugin.h > mysql/plugin_auth_common.h > mysql/plugin_auth.h > mysql_com.h > mysqld_error.h > mysql.h > mysql_version.h > my_sys.h > server/...

1 0

email location - files or sql
by Robert Moskowitz 25 Feb '22

25 Feb '22

I have been running a Dovecot based mail server for over 10 years and it is time (really past) to upgrade. I really don't want to roll my own anymore. Too much time and too many skills needed. Time to retire. But still want it 'in-house'. What I am seeing is that many of the packages seem to roll the messages into some SQL database. My Dovecot setup uses the /home/vmail/doman/../{cur,new,etc} tree structure. Is there any pros vs cons on this that I can read? Is there some nice packed mailserver I can drop on a Centos-arm server that has Dovecot under the covers and I can easily rsync my current mail store to it? Mail-in-a-box looks interesting. But I have not figured out its internals and if I have to worry about anything compiled for arm that is not part of the distro. Thanks in advance for help.

5 7

Messages reappearing in mailboxes as duplicates
by Andrew Skipper 23 Feb '22

23 Feb '22

Hello, We have 3 nodes running, with a two way replication between 2 of them and a 1 way replication to a DR node running off one. We use mdbox, and directors to split traffic across nodes. There is no shared file system. Users are experiencing messages reappearing in their INBOX as unread with duplicate GUID and message headers. This occurs generally several days after a message was first received (and often actioned; read, moved, trashed, expunged, also often bulk moved/deleted). We have attempted to remove replication from the equation by cutting down to one single node with all replication disabled which did not have any impact. We have also started regular cache and mailbox purging. There are no logged events when mail items reappear, and we only observe it based on user report, mailbox inspection (doveadm looking for duplicate GUIDs/unique message headers) or seeing IMAP commands being done against the same message twice (e.g. monday they copy to trash, delete and expunge from inbox, delete and expunge from trash, then the next monday they will have to do the same for the reappearing message). OS: Centos 7 Dovecot: dovecot -version Scheduled jobs: */15 0 * * 0 doveadm sync -u "*" tcps:<dr node>:12345 > /var/log/dovecot/dr_sync.log 2>&1 1 3 * * * doveadm mailbox cache purge -A INBOX 21 3 * * * doveadm mailbox cache purge -A Trash 0 1 * * 0 /usr/bin/doveadm purge -A >/dev/null 2>&1 Conf: dovecot -n # 2.3.16 (7e2e900c1a): /etc/dovecot/dovecot.conf # OS: Linux 3.10.0-1160.53.1.el7.x86_64 x86_64 CentOS Linux release 7.9.2009 (Core) # Hostname: <primary node> auth_master_user_separator = * default_vsz_limit = 1 G disable_plaintext_auth = no dotlock_use_excl = no doveadm_password = # hidden, use -P to show it listen = * mail_fsync = always mail_location = mdbox:~/mail mail_nfs_index = yes mail_nfs_storage = yes mail_plugins = " notify replication" mmap_disable = yes namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { autoexpunge = 30 days special_use = \Trash } prefix = separator = . } passdb { args = /etc/dovecot/conf.d/passwd.masterusers driver = passwd-file master = yes } passdb { args = /etc/dovecot/conf.d/passwd.masterusers driver = passwd-file } plugin { mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename save flag_change mail_log_fields = uid box msgid size flags mail_log_group_events = mail_replica = tcps:<second node>:12345 } protocols = imap service aggregator { fifo_listener replication-notify-fifo { mode = 0666 user = vmail } unix_listener replication-notify { mode = 0666 user = vmail } } service doveadm { inet_listener { port = 12345 ssl = yes } } service imap-login { inet_listener imap { port = 144 } inet_listener imaps { port = 994 ssl = yes } } service replicator { process_min_avail = 1 unix_listener replicator-doveadm { mode = 0666 } } ssl = required ssl_cert = </etc/pki/dovecot/certs/dovecot-internal.pem ssl_cipher_list = TLS_AES_256_GCM_SHA384:TLS_CHACHA20_POLY1305_SHA256:TLS_AES_128_GCM_SHA256:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-SHA256:DHE-RSA-AES128-SHA256:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA256:!aNULL:!eNULL:!EXPORT:!DES:!RC4:!MD5:!PSK:!aECDH:!EDH-DSS-DES-CBC3-SHA:!EDH-RSA-DES-CBC3-SHA:!KRB5-DES-CBC3-SHA ssl_client_ca_file = /etc/ssl/certs/ca-bundle.crt ssl_dh = # hidden, use -P to show it ssl_key = # hidden, use -P to show it ssl_prefer_server_ciphers = yes userdb { args = /etc/dovecot/conf.d/dovecot-dict-auth.conf.ext driver = dict } userdb { args = /etc/dovecot/conf.d/dovecot-ldap.conf.ext driver = ldap } protocol imap { mail_max_userip_connections = 9999 mail_plugins = " notify replication mail_log notify" } Any thoughts would be greatly appreciated. Thanks in advance, Andrew

1 0

Pigeonhole page's RFC links broken (fix attached)
by Patrick Nagel 22 Feb '22

22 Feb '22

Hi there, I was just reading https://pigeonhole.dovecot.org/ and noticed that all the links to the RFCs are broken. I fixed them via regexp search & replace curl https://pigeonhole.dovecot.org/ | sed -e 's|https\?://tools.ietf.org/html/rfc$[0-9]\{4\}$/\?|https://www.ietf.org/r…' >Pigeonhole_fixed_rfc_links.html and attached the resulting page. Cheers, Patrick.

1 0

postfix, dovecot-lda, /run/dovecot/stats-writer socket permision and local user delivery, again
by Michael Tokarev 22 Feb '22

22 Feb '22

Hi! There are many questions on the 'net about the same theme: lda(mjt): Error: net_connect_unix(/run/dovecot/stats-writer) failed: Permission denied dovecot-lda is run from postfix as mailbox_command for local users. There's even a suggestion on dovecot wiki to make dovecot-lda setgid (to mail) - for a different reason but people use this trick to shut this error message up. See eg the last message at https://forum.zentyal.org/index.php?topic=35236.0 which points to https://wiki2.dovecot.org/LDA/Postfix . But the thing is: mail delivery stops right after making dovecot-lda setgid, like this: Feb 22 00:06:46 tsrv dovecot: lda(mjt)<253650><s+nnHub+E2LS3gMA7tuOMA>: \ Fatal: setresgid(914(dovecot),914(dovecot),8(mail)) failed with euid=1000(mjt): \ Operation not permitted why the hell lda tries to setuid to dovecot user? It will definitely unable to write to the maildir since it is owned by user mjt, not by user dovecot! And I *only* made it setgid, not setuid. How to use dovecot-lda together with postfix, after all? Thanks, /mjt

2 2

RE: Different auth logging with cache lookup. (OPEN)
by Eikås Arvid 22 Feb '22

22 Feb '22

No, the problem is the logging of the cache lookup with password mismatch. (release 2.3.17) We missing client IP and user in the cache lookup logging. auth-worker(1676266): Info: conn unix:auth-worker (pid=1675846,uid=97): auth-worker<2>: Password mismatch (given password: xxxx) Arvid -----Original Message----- From: Aki Tuomi <aki.tuomi(a)open-xchange.com> Sent: tirsdag 22. februar 2022 09:15 To: Eikås Arvid <arvid.eikas(a)telenor.no>; dovecot(a)dovecot.org Subject: Re: Different auth logging with cache lookup. (OPEN) > On 22/02/2022 09:42 Eikås Arvid <arvid.eikas(a)telenor.no> wrote: > > > dovecot-2.3.5 and centos 7 > User and IP are logged in both scenarios. > auth-worker(26145): sql(user,1.1.1.1,<XXXXXXXX>): Password mismatch > auth-worker(13380): cache(user(a)online.no,1.1.1.1): Password mismatch > > > > > dovecot-2.3.17 and rhel 8 > Feb 03 14:42:53 auth-worker(1676266): Info: conn unix:auth-worker > (pid=1675846,uid=97): auth-worker<1>: sql(user,127.0.0.1,<XXXXXXXX>): > Password mismatch (given password: xxxx) Feb 03 14:43:48 > auth-worker(1676266): Info: conn unix:auth-worker > (pid=1675846,uid=97): auth-worker<2>: Password mismatch (given > password: xxxx) > > User and IP is not logged in cache lookup. > Is this a design change or a unplanned change? > > Any ide when it was changed? Looks more like 2.3.5 is incorrectly checking both cache and sql? Aki

1 0

Different auth logging with cache lookup. (OPEN)
by Eikås Arvid 22 Feb '22

22 Feb '22

dovecot-2.3.5 and centos 7 User and IP are logged in both scenarios. auth-worker(26145): sql(user,1.1.1.1,<XXXXXXXX>): Password mismatch auth-worker(13380): cache(user(a)online.no,1.1.1.1<mailto:user@online.no,1.1.1.1>): Password mismatch dovecot-2.3.17 and rhel 8 Feb 03 14:42:53 auth-worker(1676266): Info: conn unix:auth-worker (pid=1675846,uid=97): auth-worker<1>: sql(user,127.0.0.1,<XXXXXXXX>): Password mismatch (given password: xxxx) Feb 03 14:43:48 auth-worker(1676266): Info: conn unix:auth-worker (pid=1675846,uid=97): auth-worker<2>: Password mismatch (given password: xxxx) User and IP is not logged in cache lookup. Is this a design change or a unplanned change? Any ide when it was changed?

2 1

/usr/libexec/dovecot/anvil crashes immediately
by Friedrich Kink 21 Feb '22

21 Feb '22

Dear list, I built a dovecot package for openindiana (which is a Solaris derivative) from latest version 2.3.18. Everything compiles and builds fine without any issue. Even subsequent installation and startup of main dovecot process works as expected. But execution of /usr/libexec/dovecot/anvil immediately crashes. To get some more meaningful backtrace I compiled with -g. Below some facts of my environment and a backtrace. Maybe some of you are more familiar with this kind of issue as I, and can give some hint or share ideas how to nail down the problem. Or can it be a configuration issue? BTW it is running in a so-called zone. And former versions, I don't know exactly but I believe up to 2.3.17, did not show this crash. gcc --version gcc (OpenIndiana 7.5.0-il-0) 7.5.0 Configure parameters: gcc_OPT = -g CONFIGURE_OPTIONS+= --sysconfdir=/etc \ --localstatedir=/var \ --with-gssapi=plugin \ --with-ldap=plugin \ --with-sql=plugin \ --with-lua=plugin \ --with-ssl=openssl \ --with-ioloop=poll \ --with-notify=none \ --with-sodium \ --with-mysql \ --with-pgsql \ --enable-static=no \ --without-systemd \ SSL_CFLAGS=-I/usr/openssl/1.1/include \ SSL_LIBS="-L/usr/openssl/1.1/lib/amd64 -lssl -lcrypto" \ LDFLAGS="-lldap_r" Backtrace: (gdb) bt full #0 0x00007fff5d2e6f2a in _lwp_kill () from /lib/64/libc.so.1 No symbol table info available. #1 0x00007fff5d2dd7f0 in thr_kill () from /lib/64/libc.so.1 No symbol table info available. #2 0x00007fff5d27ae7e in raise () from /lib/64/libc.so.1 No symbol table info available. #3 0x00007fff5d254ad8 in abort () from /lib/64/libc.so.1 No symbol table info available. #4 0x00007ffef05367c0 in default_fatal_finish (type=LOG_TYPE_PANIC, status=0) at /usr/src/myoi-userland/components/mail/dovecot/dovecot-2.3.18/src/lib/failures.c:459 backtrace = 0x4178b8 "/usr/lib/amd64/dovecot/libdovecot.so.0.0.0'backtrace_append_libc+0x4c [0x7ffef0522042] -> /usr/lib/amd64/dovecot/libdovecot.so.0.0.0'backtrace_append+0x18 [0x7ffef05221c5] -> /usr/lib/amd64/dovecot/li"... recursed = 0 #5 0x00007ffef0536827 in fatal_handler_real (ctx=0x7fffbffff820, format=0x7ffef05d8730 "file %s: line %d (%s): assertion failed: (%s)", args=0x7fffbffff850) at /usr/src/myoi-userland/components/mail/dovecot/dovecot-2.3.18/src/lib/failures.c:471 status = 0 #6 0x00007ffef0536871 in default_fatal_handler (ctx=0x7fffbffff820, format=0x7ffef05d8730 "file %s: line %d (%s): assertion failed: (%s)", args=0x7fffbffff850) at /usr/src/myoi-userland/components/mail/dovecot/dovecot-2.3.18/src/lib/failures.c:479 No locals. #7 0x00007ffef0536aed in i_panic (format=0x7ffef05d8730 "file %s: line %d (%s): assertion failed: (%s)") at /usr/src/myoi-userland/components/mail/dovecot/dovecot-2.3.18/src/lib/failures.c:524 ctx = {type = LOG_TYPE_PANIC, exit_status = 0, timestamp = 0x0, timestamp_usecs = 0, log_prefix = 0x0, log_prefix_type_pos = 0} args = {{gp_offset = 8, fp_offset = 48, overflow_arg_area = 0x7fffbffff930, reg_save_area = 0x7fffbffff870}} #8 0x00007ffef056048b in io_loop_handle_add (io=0x42d7c0) at /usr/src/myoi-userland/components/mail/dovecot/dovecot-2.3.18/src/lib/ioloop-poll.c:94 ctx = 0x423180 condition = IO_READ old_count = 3221223792 index = 0 old_events = 59 fd = 4 __func__ = "io_loop_handle_add" #9 0x00007ffef055c1ab in io_add_file (ioloop=0x423070, fd=4, condition=IO_READ, source_filename=0x7ffef05d9f48 "/usr/src/myoi-userland/components/mail/dovecot/dovecot-2.3.18/src/lib/lib-signals.c", source_linenum=192, callback=0x7ffef05698f4 <signal_read>, context=0x0) at /usr/src/myoi-userland/components/mail/dovecot/dovecot-2.3.18/src/lib/ioloop.c:72 io = 0x42d7c0 __func__ = "io_add_file" #10 0x00007ffef055c27a in io_add_to (ioloop=0x423070, fd=4, condition=IO_READ, source_filename=0x7ffef05d9f48 "/usr/src/myoi-userland/components/mail/dovecot/dovecot-2.3.18/src/lib/lib-signals.c", source_linenum=192, callback=0x7ffef05698f4 <signal_read>, context=0x0) at /usr/src/myoi-userland/components/mail/dovecot/dovecot-2.3.18/src/lib/ioloop.c:94 io = 0x7ffef0609aa0 <static_system_pool> __func__ = "io_add_to" #11 0x00007ffef0569289 in lib_signals_init_io (l=0x420a00) at /usr/src/myoi-userland/components/mail/dovecot/dovecot-2.3.18/src/lib/lib-signals.c:192 __func__ = "lib_signals_init_io" #12 0x00007ffef056933c in lib_signals_ioloop_ref (ioloop=0x423070) at /usr/src/myoi-userland/components/mail/dovecot/dovecot-2.3.18/src/lib/lib-signals.c:205 l = 0x420a00 #13 0x00007ffef0569507 in signal_handler_switch_ioloop (h=0x4209c0) at /usr/src/myoi-userland/components/mail/dovecot/dovecot-2.3.18/src/lib/lib-signals.c:232 No locals. #14 0x00007ffef056a10a in lib_signals_set_handler (signo=2, flags=LIBSIG_FLAG_DELAYED, handler=0x7ffef0475e74 <sig_die>, context=0x422f20) at /usr/src/myoi-userland/components/mail/dovecot/dovecot-2.3.18/src/lib/lib-signals.c:520 h = 0x4209c0 __func__ = "lib_signals_set_handler" #15 0x00007ffef0477596 in master_service_init_finish (service=0x422f20) at /usr/src/myoi-userland/components/mail/dovecot/dovecot-2.3.18/src/lib-master/master-service.c:668 sigint_flags = LIBSIG_FLAG_DELAYED st = {st_dev = 79, st_ino = 4209307, st_mode = 1, st_nlink = 79, st_uid = 4218704, st_gid = 0, st_rdev = 17179869185, st_size = 4337776, st_atim = {tv_sec = 140736414612384, tv_nsec = 1}, st_mtim = {tv_sec = 0, tv_nsec = 8388608}, st_ctim = {tv_sec = 0, tv_nsec = 0}, st_blksize = 4378928, st_blocks = 255, st_fstype = " /B\000\000\000\000\000 /B\000\000\000\000"} __func__ = "master_service_init_finish" #16 0x0000000000403cce in main (argc=1, argv=0x7fffbffffc38) at /usr/src/myoi-userland/components/mail/dovecot/dovecot-2.3.18/src/anvil/main.c:80 service_flags = (MASTER_SERVICE_FLAG_UPDATE_PROCTITLE | MASTER_SERVICE_FLAG_DONT_SEND_STATS) error = 0x7fffbffffc10 " \374\377\277\377\177" Thanks a lot for any help, Fritz

2 1

Fwd: Memory problems with config service
by Víctor Rubiella Monfort 21 Feb '22

21 Feb '22

(Resend to list, sorry for personal reply) -------- Mensaje reenviado -------- Asunto: Re: Memory problems with config service Fecha: Wed, 16 Feb 2022 16:19:32 +0100 De: Víctor Rubiella Monfort <vrubiella(a)cdmon.com> Para: Aki Tuomi <aki.tuomi(a)open-xchange.com> # 2.2.27 (): /etc/dovecot/dovecot.conf # Pigeonhole version 0.4.16 () # OS: Linux 4.9.0-16-amd64 x86_64 Debian 9.9 auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@& auth_worker_max_count = 25 default_client_limit = 1200 disable_plaintext_auth = no first_valid_uid = 100 info_log_path = /var/log/dovecot-info.log log_path = /var/log/dovecot.log login_greeting = Server ready login_log_format_elements = user=<%u> method=%m port=%a rip=%r lip=%l mpid=%e %c mail_location = maildir:%h mail_max_userip_connections = 100 passdb { args = /etc/dovecot/mailaccounts.db driver = passwd-file } plugin { quota = maildir:User quota quota_rule3 = SPAM:storage=+50M } protocols = imap pop3 service config { vsz_limit = 9 G } service imap-login { process_limit = 500 } service pop3-login { process_limit = 500 } ssl_ca = </home/ssl/system/domain.cat/ca.pem ssl_cert = </home/ssl/system/domain.cat/crt.pem ssl_dh_parameters_length = 2048 ssl_key = # hidden, use -P to show it userdb { args = /etc/dovecot/mailaccounts.db driver = passwd-file } valid_chroot_dirs = /home/postfix/ protocol imap { mail_plugins = quota imap_quota mail_log notify } protocol pop3 { mail_plugins = quota mail_log notify } protocol lda { mail_plugins = quota } local_name *.hidden.com { ssl_cert = </home/ssl/dovecot/live/hidden.com/fullchain.pem ssl_key = # hidden, use -P to show it } #3100+ local_name more with different domains. El 16/2/22 a las 10:02, Aki Tuomi escribió: >> On 16/02/2022 07:30 Víctor Rubiella Monfort <vrubiella(a)cdmon.com> wrote: >> >> >> Hi all, >> I'm having problems with memory in config service. I increased >> vsz_limit to 10GB but continue with this errors when try to reload or >> restart dovecot: >> >> config: Panic: data stack: Out of memory when allocating 2147483688 bytes >> master: Error: service(config): command startup failed, throttling >> for 2 secs >> config: Fatal: master: service(config): child 5512 killed with signal >> 6 (core dumps disabled) >> >> Dovecot has a lot of certificates TLS configured (SNI) (about 3k), >> but if I check the size of all of them is aprox 170MB on disk.Why >> does it need so much memory to boot? Is normal? >> >> >> >> service config { >> vsz_limit = {{ vszlimit }} >> } > Hi! > > Can you send your doveconf -n output? > > Aki >

2 2

Index Corruption Problem with new VM Host - But Only With Replication Enabled
by Reuben Farrelly 21 Feb '22

21 Feb '22

Hi, I've recently migrated my two VMs across from Linode (who use KVM) onto a local VPS service (which also uses KVM). Since doing so I have started to see some strange problems with Dovecot relating to indexes and replication. I have copied the configuration files across from old host to new host. The kernel is the same - as this is Gentoo everything was rebuilt and installed from fresh, but with the same options (use flags). Even the Linux kernel is the same version with the exact same options (as is Dovecot). The filesystem is the same EXT4 with the same options too. Here is what is logged: Feb 18 15:20:41 tornado.reub.net dovecot: imap(reuben)<20031><d0yxIEPY3ROfxG3u>: Error: Mailbox INBOX: /home/reuben/Maildir/dovecot.index reset, view is now inconsistent Feb 18 15:20:41 tornado.reub.net dovecot: imap(reuben)<20031><d0yxIEPY3ROfxG3u>: Disconnected: IMAP session state is inconsistent, please relogin. in=146 out=1398 deleted=0 expunged=0 trashed=0 hdr_count=0 hdr_bytes=0 body_count=0 body_bytes=0 The trigger is the move/delete of an email. Just reading seems to be OK. But as soon as you move/delete an email this event occurs and is logged. The move fails on the first attempt (error is logged, client refreshes) but then if attempted again it succeeds. This error causes the clients to be thrown off and the client view refreshed which seems to require a redownload of everything. It is extremely disruptive to client access. The odd thing is that as soon as I disable replication by commenting out the mail_replica line, *all* of the index corruption messages and symptoms go away completely and I don't see this problem occur. As soon as I re-add it they come back. So it appears that replication at least is triggering the problem. Replication is imap1 -> imap2 and on the other host imap2 - imap1 The odd thing is that this never was a problem while the system was on Linode. I have removed all files on the remote and let dovecot re-replicate everything but this didn't help. I can go back to the VPS host and talk to them about it as I have an open ticket but from their perspective it looks like an application level problem, so there's not a lot for them to go on especially given everything else is working OK. Could the underlying host be playing a role in this? It seems unlikely given turning replication or or off causes the problem to appear or disappear. All clients are connecting to only the master of the two replication partners. Many have multiple concurrent sessions (eg my phone, and Thunderbird at the same time) but all are connecting to only one instance at a time. The second instance is only there for a failover scenario (update a DNS entry to failover). There is no NFS or any sort of sharing set up on the VMs. They are dedicated virtual disks. Can anyone give me any ideas how to troubleshoot this further or things to try? Some system details: # 2.3.18 (9dd8408c18): /etc/dovecot/dovecot.conf # Pigeonhole version 0.5.18 (0bc28b32) # OS: Linux 5.16.10-gentoo x86_64 Gentoo Base System release 2.8 # Hostname: tornado.reub.net auth_mechanisms = plain login auth_username_format = %Ln doveadm_password = # hidden, use -P to show it first_valid_uid = 1000 imap_client_workarounds = tb-lsub-flags tb-extra-mailbox-sep last_valid_uid = 1099 login_log_format_elements = user=<%u> auth-method=%m remote=%r local=%l %c %k mail_attribute_dict = file:%h/Maildir/dovecot-attributes mail_location = maildir:~/Maildir mail_plugins = notify replication managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate mime foreverypart extracttext namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { args = failure_show_msg=yes %s driver = pam } plugin { mail_replica = tcp:imap2.reub.net:4814 replication_full_sync_interval = 2 hours sieve = file:~/sieve;active=~/.dovecot.sieve } postmaster_address = postmaster(a)reub.net protocols = imap lmtp sieve submission sieve recipient_delimiter = - service aggregator { fifo_listener replication-notify-fifo { mode = 0666 user = root } unix_listener replication-notify { mode = 0666 user = root } } service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0666 user = postfix } unix_listener auth-userdb { mode = 0777 } } service doveadm { inet_listener { address = 2404:9400:2264:7200::143 port = 4813 ssl = yes } inet_listener { address = 2404:9400:2264:7200::143 port = 4814 ssl = no } user = root } service imap-login { inet_listener imap { port = 143 } } service lmtp { inet_listener lmtp { address = ::1 port = 24 } unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0660 user = postfix } } service managesieve-login { inet_listener sieve { address = 127.0.0.1 port = 4190 } } service replicator { process_min_avail = 1 unix_listener replicator-doveadm { mode = 0666 } } service submission-login { inet_listener submission { address = 103.4.234.81 2404:9400:2264:7200::587 port = 587 } } ssl_cert = </etc/ssl/dovecot/reub.net.pem ssl_client_ca_dir = /etc/ssl/certs ssl_dh = # hidden, use -P to show it ssl_key = # hidden, use -P to show it submission_client_workarounds = whitespace-before-path submission_relay_host = localhost submission_relay_port = 587 submission_relay_trusted = yes userdb { driver = passwd result_success = continue-ok } protocol lmtp { mail_plugins = notify replication sieve } protocol lda { mail_plugins = notify replication sieve } protocol imap { imap_metadata = yes mail_max_userip_connections = 25 } Thanks, Reuben

2 2

dovecot-2.3-pigeonhole-0.5.18 : Freebsd Will not build
by Paul Kudla (Scom.ca Internet Services Inc.) 21 Feb '22

21 Feb '22

dovecot version : dovecot-2.3.14 freebsd 12.1 dovecot-2.3.14 built manually (no port build) : ./configure --with-pgsql currentconfig (dovecot-2.3-pigeonhole-0.5.18) : ./configure --with-dovecot=/usr/local/lib/dovecot Error when building : Screen Shot (color may help) Actual : libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../../../.. -I/usr/local/include/dovecot -I../../../.. -I../../../../src/lib-sieve -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -fno-builtin-strftime -Wstrict-aliasing=2 -fstack-protector-strong -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -mfunction-return=keep -mindirect-branch=keep -I../../../.. -MT sieve-dict-script.lo -MD -MP -MF .deps/sieve-dict-script.Tpo -c sieve-dict-script.c -fPIC -DPIC -o .libs/sieve-dict-script.o sieve-dict-script.c: In function 'sieve_dict_script_open': sieve-dict-script.c:84:9: error: variable 'set' has initializer but incomplete type 84 | struct dict_op_settings set = { | ^~~~~~~~~~~~~~~~ sieve-dict-script.c:85:4: error: 'struct dict_op_settings' has no member named 'username' 85 | .username = dstorage->username, | ^~~~~~~~ sieve-dict-script.c:85:15: warning: excess elements in struct initializer 85 | .username = dstorage->username, | ^~~~~~~~ sieve-dict-script.c:85:15: note: (near initialization for 'set') sieve-dict-script.c:84:26: error: storage size of 'set' isn't known 84 | struct dict_op_settings set = { | ^~~ sieve-dict-script.c:88:31: warning: passing argument 3 of 'dict_lookup' from incompatible pointer type [-Wincompatible-pointer-types] 88 | (dscript->dict, &set, script->pool, path, &data_id, &error); | ~~~~~~^~~~~~ | | | pool_t {aka struct pool *} In file included from sieve-dict-script.c:8: /usr/local/include/dovecot/dict.h:102:15: note: expected 'const char *' but argument is of type 'pool_t' {aka 'struct pool *'} 102 | const char *key, const char **value_r, const char **error_r); | ~~~~~~~~~~~~^~~ sieve-dict-script.c:88:39: warning: passing argument 4 of 'dict_lookup' from incompatible pointer type [-Wincompatible-pointer-types] 88 | (dscript->dict, &set, script->pool, path, &data_id, &error); | ^~~~ | | | const char * In file included from sieve-dict-script.c:8: /usr/local/include/dovecot/dict.h:102:33: note: expected 'const char **' but argument is of type 'const char *' 102 | const char *key, const char **value_r, const char **error_r); | ~~~~~~~~~~~~~^~~~~~~ sieve-dict-script.c:87:8: error: too many arguments to function 'dict_lookup' 87 | ret = dict_lookup | ^~~~~~~~~~~ In file included from sieve-dict-script.c:8: /usr/local/include/dovecot/dict.h:101:5: note: declared here 101 | int dict_lookup(struct dict *dict, pool_t pool, | ^~~~~~~~~~~ sieve-dict-script.c:84:26: warning: unused variable 'set' [-Wunused-variable] 84 | struct dict_op_settings set = { | ^~~ sieve-dict-script.c: In function 'sieve_dict_script_get_stream': sieve-dict-script.c:126:9: error: variable 'set' has initializer but incomplete type 126 | struct dict_op_settings set = { | ^~~~~~~~~~~~~~~~ sieve-dict-script.c:127:4: error: 'struct dict_op_settings' has no member named 'username' 127 | .username = dstorage->username, | ^~~~~~~~ sieve-dict-script.c:127:15: warning: excess elements in struct initializer 127 | .username = dstorage->username, | ^~~~~~~~ sieve-dict-script.c:127:15: note: (near initialization for 'set') sieve-dict-script.c:126:26: error: storage size of 'set' isn't known 126 | struct dict_op_settings set = { | ^~~ sieve-dict-script.c:130:32: warning: passing argument 3 of 'dict_lookup' from incompatible pointer type [-Wincompatible-pointer-types] 130 | (dscript->dict, &set, dscript->data_pool, path, &data, &error); | ~~~~~~~^~~~~~~~~~~ | | | pool_t {aka struct pool *} In file included from sieve-dict-script.c:8: /usr/local/include/dovecot/dict.h:102:15: note: expected 'const char *' but argument is of type 'pool_t' {aka 'struct pool *'} 102 | const char *key, const char **value_r, const char **error_r); | ~~~~~~~~~~~~^~~ sieve-dict-script.c:130:45: warning: passing argument 4 of 'dict_lookup' from incompatible pointer type [-Wincompatible-pointer-types] 130 | (dscript->dict, &set, dscript->data_pool, path, &data, &error); | ^~~~ | | | const char * In file included from sieve-dict-script.c:8: /usr/local/include/dovecot/dict.h:102:33: note: expected 'const char **' but argument is of type 'const char *' 102 | const char *key, const char **value_r, const char **error_r); | ~~~~~~~~~~~~~^~~~~~~ sieve-dict-script.c:129:8: error: too many arguments to function 'dict_lookup' 129 | ret = dict_lookup | ^~~~~~~~~~~ In file included from sieve-dict-script.c:8: /usr/local/include/dovecot/dict.h:101:5: note: declared here 101 | int dict_lookup(struct dict *dict, pool_t pool, | ^~~~~~~~~~~ sieve-dict-script.c:126:26: warning: unused variable 'set' [-Wunused-variable] 126 | struct dict_op_settings set = { | ^~~ gmake[5]: *** [Makefile:461: sieve-dict-script.lo] Error 1 gmake[5]: Leaving directory '/usr/local/src/mail/dovecot-2.3-pigeonhole-0.5.18/src/lib-sieve/storage/dict' gmake[4]: *** [Makefile:426: all-recursive] Error 1 gmake[4]: Leaving directory '/usr/local/src/mail/dovecot-2.3-pigeonhole-0.5.18/src/lib-sieve/storage' gmake[3]: *** [Makefile:909: all-recursive] Error 1 gmake[3]: Leaving directory '/usr/local/src/mail/dovecot-2.3-pigeonhole-0.5.18/src/lib-sieve' gmake[2]: *** [Makefile:438: all-recursive] Error 1 gmake[2]: Leaving directory '/usr/local/src/mail/dovecot-2.3-pigeonhole-0.5.18/src' gmake[1]: *** [Makefile:763: all-recursive] Error 1 gmake[1]: Leaving directory '/usr/local/src/mail/dovecot-2.3-pigeonhole-0.5.18' gmake: *** [Makefile:622: all] Error 2 -- Happy Sunday !!! Thanks - paul Paul Kudla Scom.ca Internet Services <http://www.scom.ca> 004-1009 Byron Street South Whitby, Ontario - Canada L1N 4S3 Toronto 416.642.7266 Main 1.866.411.7266 Fax 1.888.892.7266

2 1

initial replication or clone?
by Joachim Lindenberg 20 Feb '22

20 Feb '22

Hello, I want to improve availability of my dovecot installation by implementing replication as outlined in https://wiki.dovecot.org/Replication. I am wondering whether I have to install an empty copy or whether it is also an option to clone the entire existing system and then configure replication, just to avoid the initial overhead. Any input? Thanks, Joachim

1 0