- dovecot - dovecot.org

Re: [Dovecot] Lots of pop3-logins
by V S Rao 28 Jun '09

28 Jun '09

> > > Doing a "ps aux" on my Slackware box, I have approx 100 PID's of "pop3-login's going on. This is a production mail server, but it is getting VERY low traffic. In fact, only 3 people can "pop3" into it. I've check their e-mail clients, and they are not checking mail any more often than every 5 minutes. > > > > > > This is a new installation and I've had the server up and running since Sunday. If it matters, I'm using Postfix for the MTA and using the Dovecot SASL library to AUTH SMTP. > > > > > > Is this a cause for concern? Why does Dovecot need this many processes? > > > > > > > >> Because dovecot preforks the *-login processes to speed-up the login. > > > > >> No need to worry. > > > > 100 login sessions for just 3 connections? That is not right, no matter what. > > >> No, login_processes_count matters. > > How? If my understanding is correct, you have extra 3 login processes created to cater to new connections. So with only 3 POP3 users, why should so many login processes be spawned? I can understand 10-15. But 100 definitely indicates either the processes are not dying or something else happening on the system which is causing such high number of login processes. The system definitely needs to be checked for some kind of attack, a rogue process running on the system or something else. > >> My idle box has 64 imap-login processes and no, I'm not under a >> dictionary attack :) I am not sure what your load is (user base, system config etc), but I will give you my typical load here. I run mail server for about 6000 users with a mix of 70% POP3 and 30% IMAP (thro webmail). And here are the typical stats (I run a script in the background collecting this data every 5 secs): pop3-logins:12 pop3-connections:8 IMAP-logins:7 IMAP-connections:11 I have read other opinions in this thread by Timo & others. And I am interested in a few things. So if you will indulge me, maybe it will be useful for others who face these kind of issues Timo Wrote: You can also just decrease login_process_max_count Wouldn't decreasing the login_process_max_count simply create more problems. Now users will start experiencing timeouts sooner than before, because whatever is causing the login processes to increase (attack, rogue process or whatever) will *always* be trying to login and genuine users will be denied login. So without knowing the root cause of the issue simply decreasing or increasing the login_process_max_count will lead to other problems. Correct me if I am wrong. Rodman Wrote: I'll go ahead and lower that limit to something that fits my usage better. No, I think leave that value to default and try and identify the root cause and prevent it. Noel Wrote: What would be nice is, an anti brute force option Yes, that would be nice. But consider a situation where the system is not under brute force attack, but for some reason the number of login processes keep on increasing by the hour. This would ultimately lead the system to deny connections to the users. Is there a way to track what is happening? strace would be too complicated for us field guys to work with. Any suggestions? Regards --Rao

4 4

[Dovecot] Dovecot v1.2 ACL inheritance for new subfolders (aka copying ACLs)
by Steffen Kaiser 28 Jun '09

28 Jun '09

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, http://wiki.dovecot.org/ACL mentions: "Currently there is no ACL inheritance." However this applies to a folder inherit ACLs to existing subfolders; when you share a folder and a non-owner creates a sub-folder within, no ACLs are set, hence, the creator cannot access the new folder. Could the "create mailbox"-process copy the ACLs to the sub-folder? Actually, I would like most, if this is done regardless if owner or non-owner creates subfolders. Bye, - -- Steffen Kaiser -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) iQEVAwUBSj+FVnWSIuGy1ktrAQI81Af/aBOtllnFl1IP1RRMOri75cayXMWkiPkS GWKrZaK4vISUqL0yN0mSCMvP4sESwTndIn6kel3ZYqEDFrYWuhg+wAQx8XGxAfgs W1vsnlbPcQ6U02dtC7pGqhaFc8ZomLEFrO5xmDd+DEPTSqBiJzOz6C6mg7diqIuq Tmd0oGDqrP4shKt5y3oSM5tZSELnpQD2+J636JROlxvtuYgVti9M+DSPSjU3PRDs oS7eMUf9mmOt4BAUzWmq4mNda8NBFcDK3L70Lu5r1/maheEIcrDAlMmRTTtlShq8 FM2zXey5sLGMyuRhhlQmaefxuvYQosblbpGYlf6K71tKNPBzdFeR2A== =3pmt -----END PGP SIGNATURE-----

2 1

[Dovecot] bzip2 compression bug
by fernando＠dfcom.com.br 28 Jun '09

28 Jun '09

Hi, I compressed many files using bzip2, but in some cases it crashes. I believe that it is related to dovecot indexes. How to reproduce: Inside a Maildir folder without any indexes yet, compress a message with bzip2 and tryes to access it. At my server is showed the error: Jun 24 00:18:20 maildev dovecot: IMAP(xxx@xxx): FETCH for mailbox Trash UID 1 failed to read message input: No such file or directory Jun 24 00:18:20 maildev dovecot: IMAP(xxx@xxx): Disconnected: BUG: Unknown internal error bytes=329/1050 When I did the same with gzip compression it works as expected (opening the message and creating dovecot indexes). (version, 1.1.16) Best Regards, Fernando

3 2

[Dovecot] Dovecot v1.2rc6 dict-server socket path problem & pgsql crash
by Steffen Kaiser 28 Jun '09

28 Jun '09

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, I find this in the logs: 2009-06-25 14:10:37 IMAP(dvtest) [29566]: Error: net_connect_unix(/usr/local/dovecot-1.2.rc6acl-hook2/var/run/dovecot/dict-server) failed: Permission denied 2009-06-25 14:10:37 IMAP(dvtest) [29566]: Error: acl: dict iteration failed, can't update dict although base_dir is just /var/run/dovecot/ . Dovecot v1.2 changeset: 9157:d14e8b8df025 Conf is attached. I am trying to get ACL's shared dictionary running: acl_shared_dict: proxy::acl dict: acl: pgsql:/usr/local/dovecot-1.2.rc6acl-hook2/etc/dovecot-dict-acl-sql.conf ============ I created the symlink to get map /var/run/dovecot under $install_dir, then I get a crash: 2009-06-25 14:26:53 dict: Error: pgsql: Connect failed to dovecot: could not open certificate file "/root/.postgresql/postgresql.crt": No such file or directory ==> /var/log/postgresql/postgresql-8.1-main.log <== 2009-06-25 14:26:53 CEST LOG: could not accept SSL connection: peer did not return a certificate ==> /var/log/dovecot/dovecot-1.2.log <== 2009-06-25 14:26:58 dict: Error: pgsql: Connect failed to dovecot: could not open certificate file "/root/.postgresql/postgresql.crt": No such file or directory ==> /var/log/postgresql/postgresql-8.1-main.log <== 2009-06-25 14:26:58 CEST LOG: could not accept SSL connection: peer did not return a certificate ==> /var/log/dovecot/dovecot-1.2.log <== 2009-06-25 14:27:03 dict: Error: dict sql iterate failed: Not connected to database 2009-06-25 14:27:03 IMAP(dvtest) [29801]: Error: read(/usr/local/dovecot-1.2.rc6acl-hook2/var/run/dovecot/dict-server) failed: Remote disconnected 2009-06-25 14:27:03 IMAP(dvtest) [29801]: Error: acl: dict commit failed 2009-06-25 14:27:03 dovecot: Error: child 29802 (dict) killed with signal 11 (core dumps disabled) My sql-dict.conf is: connect = host=localhost dbname=dovecot user=dovecot # password=pass [CUT samples for quota & expire] # CREATE TABLE user_shares ( # from_user varchar(100) not null, # to_user varchar(100) not null, # primary key (from_user, to_user) # ); map { pattern = shared/shared-boxes/user/$to/$from table = user_shares fields { from_user = $from to_user = $to } } ================== So I changed the connect line into: connect = dbname=dovecot user=dovecot into forcing to use the local socket, which seems to work: 2009-06-25 14:37:24 dict: Info: pgsql: Connected to dovecot but: 2009-06-25 14:37:24 dovecot: Error: child 29986 (dict) killed with signal 11 (core dumped) 2009-06-25 14:37:24 IMAP(dvtest) [29985]: Error: read(/usr/local/dovecot-1.2.rc6acl-hook2/var/run/dovecot/dict-server) failed: Remote disconnected 2009-06-25 14:37:24 IMAP(dvtest) [29985]: Error: acl: dict commit failed ==> /var/log/postgresql/postgresql-8.1-main.log <== 2009-06-25 14:37:24 CEST LOG: unexpected EOF on client connection The core's bt full of this latter crash is: Core was generated by `dict'. Program terminated with signal 11, Segmentation fault. #0 0xb7ebe463 in strlen () from /lib/tls/i686/cmov/libc.so.6 (gdb) bt full #0 0xb7ebe463 in strlen () from /lib/tls/i686/cmov/libc.so.6 No symbol table info available. #1 0x08065072 in str_append (str=0x806c168, cstr=0x0) at str.c:91 No locals. #2 0x080509ef in sql_dict_set_query (build=0xbffe8c34) at dict-sql.c:536 dict = (struct sql_dict *) 0x8076e08 sql_fields = <value optimized out> extra_values = <value optimized out> i = 0 prefix = (string_t *) 0x806c168 suffix = (string_t *) 0x806c1d8 __PRETTY_FUNCTION__ = "sql_dict_set_query" #3 0x080518a4 in sql_dict_set (_ctx=0x8080028, key=0x806c032 "shared/shared-boxes/user/dvtest2/dvtest", value=0x806c05a "1") at dict-sql.c:648 build = {dict = 0x8076e08, fields = {arr = {buffer = 0x806c130, element_size = 8}, v = 0x806c130, v_modifiable = 0x806c130}, extra_values = 0xbffe8c50, key1 = 115 's', inc = false} field = {map = 0x8076ed8, value = 0x806c05a "1"} query = <value optimized out> _data_stack_cur_id = 4 ctx = <value optimized out> dict = <value optimized out> map = <value optimized out> values = {arr = {buffer = 0x806c0f0, element_size = 4}, v = 0x806c0f0, v_modifiable = 0x806c0f0} #4 0x08052460 in dict_set (ctx=0x8080028, key=0x806c032 "shared/shared-boxes/user/dvtest2/dvtest", value=0x806c05a "1") at dict.c:168 __PRETTY_FUNCTION__ = "dict_set" #5 0x0804f355 in cmd_set (conn=0x8075bc8, line=0x8075df8 "2\tshared/shared-boxes/user/dvtest2/dvtest\t1") at dict-server.c:288 trans = (struct dict_server_transaction *) 0x8080118 #6 0x0804fbf9 in dict_client_connection_input (conn=0x8075bc8) at dict-server.c:458 _data_stack_cur_id = 3 line = 0x8075df7 "S2\tshared/shared-boxes/user/dvtest2/dvtest\t1" i = 6 ret = <value optimized out> #7 0x0805e2d0 in io_loop_handler_run (ioloop=0x8074a38) at ioloop-epoll.c:208 ctx = <value optimized out> event = (const struct epoll_event *) 0x8074b80 list = (struct io_list *) 0x8075da8 io = (struct io_file *) 0x8075d80 tv = {tv_sec = 2147483, tv_usec = 0} t_id = 2 msecs = <value optimized out> ret = 1 i = 0 j = 0 call = <value optimized out> #8 0x0805d398 in io_loop_run (ioloop=0x8074a38) at ioloop.c:338 No locals. #9 0x0805002f in main () at main.c:129 No locals. - -- Steffen Kaiser -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) iQEVAwUBSkNxwXWSIuGy1ktrAQKuyAgAn8NU8Y59qGV75VStW2MZQH/7HWLF2z9y 2L41g+NzX5LEw9o/B2ZjlAVEsNhVbqbew2A57uuvOAgV5K8iGgx1yPUjmQT9ud6X uthcsBNQIVGu6ymCN2ufeh3XdNEkrOu1pLJaWkiVQjvc8FOczMp432Jhytc9Hpbo jtMbnFuSbZmg0GX6bqJ50kOsjwme7B7ak/ubVeOwGXHU4MQ8PRXl+TXdVTlnFwKw IUZj8xPB+Gi7nRdsJlkQItp//TgeAJ9lm+i/OWzH420qljADDs9NfrfKd/DDOo6i u6W6I+5FUsJ5N7CHDAvHeDnTHPomPC+bnYAWpRyXF/kMVPaccaFxQw== =O2WZ -----END PGP SIGNATURE-----

2 2

[Dovecot] [PATCH] allow disabling libcap support although it's installed
by Daniel Mierswa 28 Jun '09

28 Jun '09

see subject :) patch is in hg export format -- Mierswa, Daniel If you still don't like it, that's ok: that's why I'm boss. I simply know better than you do. --- Linus Torvalds, comp.os.linux.advocacy, 1996/07/22 # HG changeset patch # User Daniel Mierswa <impulze(a)impulze.org> # Date 1245757676 -7200 # Branch HEAD # Node ID 343390a32894c654c8646650eba2cf130ca480d2 # Parent d77225a6412873528b3c94abe8268436df5dbe82 do not automagically depend on libcap if it's installed diff --git a/configure.in b/configure.in --- a/configure.in +++ b/configure.in @@ -196,6 +196,11 @@ TEST_WITH(bzlib, $withval), want_bzlib=auto) +AC_ARG_WITH(libcap, +[ --with-libcap Build with libcap support (Dropping capabilities).], + TEST_WITH(libcap, $withval), + want_libcap=auto) + AC_ARG_WITH(ssl, [ --with-ssl=gnutls|openssl Build with GNUTLS or OpenSSL (default)], if test x$withval = xno; then @@ -358,11 +363,13 @@ AC_DEFINE(HAVE_FDATASYNC,, Define if you have fdatasync()) ]) -AC_CHECK_LIB(cap, cap_init, [ - AC_DEFINE(HAVE_LIBCAP,, libcap is installed for cap_init()) - LIBCAP="-lcap" -]) -AC_SUBST(LIBCAP) +if test $want_libcap != no; then + AC_CHECK_LIB(cap, cap_init, [ + AC_DEFINE(HAVE_LIBCAP,, libcap is installed for cap_init()) + LIBCAP="-lcap" + ]) + AC_SUBST(LIBCAP) +fi AC_DEFINE(PACKAGE_WEBPAGE, "http://www.dovecot.org/", Support URL)

2 2

[Dovecot] strange quota behaviour with dovecot 1.1.7
by listacc＠gmx.de 28 Jun '09

28 Jun '09

Hello! I´m running dovecot 1.1.7 (which is the most recent binary of openSuSE 11.1 repository) with Postfix, MySQL and Postfixadmin. Now I´m trying for some days to get quota working, but I get some strange behaviour and I was not yet able to figure out where the error in my configuration is. Quota information is inserted by postfixadmin into a MySQL database. It seems that dovecot is reading this information correctly - when a mailbox is filled up and gets over-quota, further emails are rejected. But then, if I want to increase the quota for this filled-up mailbox in postfixadmin, postfixadmin correctly changes the quota information in MySQL table. After growing quota, mails to the account are accepted again. But my Thunderbird with Quota plugin continues showing the old quota setting. When more mails are sent to this account, it shows a quota > 100%. If I look into the "mailboxsize" file of this account, it still shows the old quota value before I raised it. If I delete the entry in mailboxsize, dovecot writes the old value in again. Seems that dovecot isn´t looking in the MySQL table (but it did after creating the account). But why are mails accepted again if dovecot is not recognizing the raised quota?? If I try now, as a user, to delete mails from the "overfilled" Inbox, it is denied with a "quota exceeded" message. But I´m able to send further mails to this account. The only way to get the account working properly again is to delete the messages directly on the server´s filesystem. I´m very grateful for every hint! regards, Andreas ------------- dovecot -n: # 1.1.7: /etc/dovecot/dovecot.conf # OS: Linux 2.6.27.23-0.1-default x86_64 openSUSE 11.1 (x86_64) ext3 base_dir: /drbd/mail/var/run/dovecot/ log_path: /var/log/dovecot.err info_log_path: /var/log/dovecot.info protocols: imaps managesieve listen(default): * listen(imap): * listen(managesieve): 192.168.1.8:2000 ssl_listen(default): *:993 ssl_listen(imap): *:993 ssl_listen(managesieve): ssl_cert_file: /etc/ssl/certs/imap.domain.crt ssl_key_file: /etc/ssl/private/imap.domain.key verbose_ssl: yes login_dir: /drbd/mail/var/run/dovecot//login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(managesieve): /usr/lib/dovecot/managesieve-login max_mail_processes: 2000 mail_max_userip_connections(default): 30 mail_max_userip_connections(imap): 30 mail_max_userip_connections(managesieve): 10 first_valid_uid: 5001 last_valid_uid: 5001 mail_location: maildir:/drbd/mail/vmail/%d/%n mail_debug: yes mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(managesieve): /usr/lib/dovecot/managesieve mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(managesieve): mail_plugin_dir(default): /usr/lib64/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib64/dovecot/modules/imap mail_plugin_dir(managesieve): /usr/lib64/dovecot/modules/managesieve managesieve_implementation_string(default): dovecot managesieve_implementation_string(imap): dovecot managesieve_implementation_string(managesieve): Cyrus timsieved v2.2.13 sieve_storage(default): sieve_storage(imap): sieve_storage(managesieve): /drbd/mail/vmail/%d/%n/sieve sieve(default): sieve(imap): sieve(managesieve): /drbd/mail/vmail/%d/%n/dovecot.sieve auth default: mechanisms: plain login cram-md5 user: nobody verbose: yes debug: yes debug_passwords: yes passdb: driver: pam passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: passwd userdb: driver: sql args: /etc/dovecot/dovecot-sql.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 432 user: vmail group: vmail plugin: sieve: /drbd/mail/vmail/%d/%n/dovecot.sieve quota: maildir --- dovecot-sql.conf: (...) password_query = SELECT username AS user, password, '/drbd/mail/vmail/%d/%n' AS userdb_home, 'maildir:/drbd/mail/vmail/%d/%n' AS userdb_mail, 5001 AS userdb_uid, 5001 AS userdb_gid FROM mailbox WHERE username = '%u' AND active = '1' (...) user_query = SELECT '/drbd/mail/vmail/%d/%n' AS home, 'maildir:/drbd/mail/vmail/%d/%n' AS mail, 5001 AS uid, 5001 AS gid, concat('*:storage=', quota, 'B') AS quota_rule FROM mailbox WHERE username = '%u' AND active = '1' --- mysql> select quota from mailbox; +-----------+ | quota | +-----------+ | 512000000 | | 512000000 | | 512000000 | | 512000000 | | 512000000 | | 512000000 | | 512000000 | | 512000000 | | 512000000 | | 30720000 | | 30720000 | +-----------+ 11 rows in set (0.00 sec) -- GRATIS für alle GMX-Mitglieder: Die maxdome Movie-FLAT! Jetzt freischalten unter http://portal.gmx.net/de/go/maxdome01

2 1

[Dovecot] POP3 flag updates
by Timo Sirainen 28 Jun '09

28 Jun '09

Why does Dovecot add \Seen flag for mails that have been RETRed? Does anyone really want to use this feature? I can't remember why I implemented it originally, perhaps it was just "because other servers do that too". I'm thinking about at least changing pop3_no_flag_updates=yes to be default. There's also of course pop3_enable_last setting to enable LAST command which was removed from POP3 specs. That requires knowing the last RETRed mail, so I guess I should add a check that it can't be enabled without pop3_no_flag_updates=no.

2 2

[Dovecot] Spliting Folders for Efficiency
by Daniel Watts 28 Jun '09

28 Jun '09

Dear Timo, Would there be any sense in giving Dovecot the option to split folders into multiple subfolders when they reached a specified size (probably message count) limit? Dovecot would monitor folders and when they reached, say, 10,000 messages, silently split the folder on the filesystem to ensure that access remains fast. I know that Dovecot scales very well but this would give practically unlimited storage capability and also keep things fast. You could even have it so that the latest 100 messages are kept in their own folder for fast access. .Folder.new .Folder.cur .Folder.tmp could become: .Folder__1.new .Folder__1.cur .Folder__1.tmp and .Folder__2.new .Folder__2.cur .Folder__2.tmp with Dovecot merging them before display as just "Folder" within the mail client. This could be further extended so that Dovecot could be configured to store 'old' message folders in a separate location. We could then have slower+cheaper+larger storage mounted so that 'old mail' does not take up the expensive local SCSI disks on the machine. Mail from 2 years ago is much less likely to be accessed than mail from the last week. This would provide very neat behind-the-scenes archiving functionality. Looking forward to hearing your thoughts. Best, Daniel -- Squirrelmail Stable 1.4.8 (and developing on 1.5.2) PHP 5.x Hardened with Eaccelerator Apache 2.x Mysql 5.0.x Imapproxy over Dovecot 1.0.rc27 with Maildir all running on Gentoo Linux for ~5,000 users.

7 11

[Dovecot] Sieve/ManageSieve integration into pkgsrc
by Edgar Fuß 28 Jun '09

28 Jun '09

I'm integrating Sieve (the new one) and ManageSieve into wip/dovecot. Currently, this works as dovecot options because dovecot must be built before sieve can be configured and sieve must be built before managesieve can be configured/built. Now, the question arose what the long-term solution (in pkgsrc) should be. To my understanding, with dovecot 2.0, ManageSieve will no longer need to patch dovecot. But what about both Sieve and ManageSieve depending on doevcot sources in order to build (or on libraries dovecot only builds internally)? The preferred way (for pkgsrc) would be if both Sieve and ManageSieve could be built as stand-alone packages and not needing a dovecot source tree to build. What's the long-term plan for Sieve/ManageSieve in this respect? The pkgsrc infrastructure (intentionally) doesn't like a package depending on anothers package working directory in order to build. So with these cross-dependencies, the only pkgsrc ways to go would be either to build it all as one package with options (that's what I currently do) or extract, patch, configure and build dovecot inside a sieve package.

3 2

[Dovecot] dovecot and vmailmgr/qmail mailboxes
by Mij 26 Jun '09

26 Jun '09

Hello folks, Time ago I worked on a patch for dovecot to work with vmailmgr http://mij.oltrelinux.com/net/dovecot-qmail-vmailmgr/ The patch was required because, despite vmailmgr complies with the checkpassword interface supported by dovecot, dovecot snips the mailbox directory returned by the authentication module at colon characters ':'. Incidentally, vmailmgr maps any "name.surname@domain" to "~domain/users/name:surname" (a standard practice in the qmail world, see eg http://www.qmail.org/man/man5/dot-qmail.html at "For security") This path dovecot would then parse as "~domain/users/name". An authentication module can't do anything about it, as this is due to dovecot collecting accounting information in one common buffer, tokenized by ':' separators. I soon stopped updating the patch because I didn't see much point in running indefinitely after releases. However, a bunch of people wrote me over the last years asking for details or updates. Partially for having a similar requirement myself, partially drafted by such feedback, I recently wrote a "compromise" wrapper solution (attached). It does not require patching dovecot (external module) and it's thus (supposedly) durable across dovecot releases; however, it cannot help with the colon problem. The wrapper works as follows: 1) compile and install: # cc -O2 -Wall -o checkvpw-dovecot-wrapper checkvpw-dovecot-wrapper.c # install -s -o root checkvpw-dovecot-wrapper /usr/local/bin 2) edit dovecot.conf, setup the auth section as follows: ============ auth default { mechanism = plain passdb checkpassword { args = /usr/local/bin/checkvpw-dovecot-wrapper } userdb prefetch { } user = root } ============ If "name.surname@domain" wants to be created, the administrator shall instead create the user "namesurname@domain" and an alias "name.surname@domain" pointing to it. This may be conceivable for new installations, but it is not for scenarios where dovecot is to replace another server on top of an existing user base. Of course, it's very desirable to support "." users too. I see that it would require several changes in the code, but I'd like to hear your opinion on this. What about - using a different separator than ":", less common and safer. Could '\0' be one? If not, what about '*'? - as a quicker & dirtier solution, what about allowing escaping? One can modify the auth module to replace ":" with "\:", if dovecot is instructed to avoid tokenizing when a "\" precedes a ":". - as an alternative, dovecot may require the module to chdir() to the mailbox directory instead of returning its path as a string, and subsequently operate locally on mailbox-relative paths. I can't guess how compatible this is with the current design. In the next days, I will publish such wrapper to the webpage. For your convenience, I will invite interested users to show up on this thread; this should help you in assessing how this is interesting for people. bye

4 7

Re: [Dovecot] Lots of pop3-logins
by V S Rao 26 Jun '09

26 Jun '09

> > Doing a "ps aux" on my Slackware box, I have approx 100 PID's of "pop3-login's going on. This is a production mail server, but it is getting VERY low traffic. In fact, only 3 people can "pop3" into it. I've check their e-mail clients, and they are not checking mail any more often than every 5 minutes. > > > > This is a new installation and I've had the server up and running since Sunday. If it matters, I'm using Postfix for the MTA and using the Dovecot SASL library to AUTH SMTP. > > > > Is this a cause for concern? Why does Dovecot need this many processes? > > > > >> Because dovecot preforks the *-login processes to speed-up the login. > > >> No need to worry. > > 100 login sessions for just 3 connections? That is not right, no matter what. >> No, login_processes_count matters. How? If my understanding is correct, you have extra 3 login processes created to cater to new connections. So with only 3 POP3 users, why should so many login processes be spawned? I can understand 10-15. But 100 definitely indicates either the processes are not dying or something else happening on the system which is causing such high number of login processes. The system definitely needs to be checked for some kind of attack, a rogue process running on the system or something else. Regards --Rao

7 9

[Dovecot] dovecot-acl-list not honouring owner / permissions that are set on dovecot-shared
by Stuart Rowan 25 Jun '09

25 Jun '09

Hi, I've just upgraded our dovecot installation from 1.0.15 to 1.1.13. This went smoothly and just worked -- thank you very much for writing such a high performance and robust piece of software. However, we have a shared mailbox that people can subscribe to. After upgrading to 1.1.13 ... dovecot tries to create a dovecot-acl-list file in the top level of this ... but it creates it chown'd to the first logged in user with a umask of -rw- --- --- A. -rw------- 1 userA shared 17179 2009-06-25 11:10 /home/imapshared/SharedMaildir/dovecot-acl-list Everyone else who tried to access the shared folder (and hence dovecot tried to read / update the dovecot-acl-list file) caused an error to be logged to the error.log I changed the permissions (once I realised what had gone wrong) to match those on the dovecot-shared file and all was well as everyone can now read/update it. B. -rw-rw---- 1 imapshared shared 17179 2009-06-25 11:19 /home/imapshared/SharedMaildir/dovecot-acl-list -rw-rw---- 1 imapshared shared 0 2008-04-25 13:20 /home/imapshared/SharedMaildir/dovecot-shared Also from time to time the permissions seem to get changed back on dovecot-acl-list inexplicably to those in situation A -- usually following a restart of dovecot but I haven't been able to reproduce this reliably. This seems like a bug to me ... do you agree / is there a sensible work-around? The declaration in dovecot.conf for the shared namespace sets user specific CONTROL and INDEX locations so that users can independently subscribe to folders and mark messages as read on an individual basis. Many thanks, Stu.

2 4

Re: [Dovecot] Lots of pop3-logins
by V S Rao 25 Jun '09

25 Jun '09

> Hello, > > Doing a "ps aux" on my Slackware box, I have approx 100 PID's of "pop3-login's going on. This is a production mail server, but it is getting VERY low traffic. In fact, only 3 people can "pop3" into it. I've check their e-mail clients, and they are not checking mail any more often than every 5 minutes. > > This is a new installation and I've had the server up and running since Sunday. If it matters, I'm using Postfix for the MTA and using the Dovecot SASL library to AUTH SMTP. > > Is this a cause for concern? Why does Dovecot need this many processes? > >> Because dovecot preforks the *-login processes to speed-up the login. >> No need to worry. 100 login sessions for just 3 connections? That is not right, no matter what. There is definitely some issue. Once the load increases the system will start timing out on POP3 connections or other network connections, such as IMAP, SSH etc. Better check out the system logs, utilization etc. for any abnormal values. Regards Rao

2 1

[Dovecot] Lots of pop3-logins
by Rodman Frowert 25 Jun '09

25 Jun '09

Hello, Doing a "ps aux" on my Slackware box, I have approx 100 PID's of "pop3-login's going on. This is a production mail server, but it is getting VERY low traffic. In fact, only 3 people can "pop3" into it. I've check their e-mail clients, and they are not checking mail any more often than every 5 minutes. This is a new installation and I've had the server up and running since Sunday. If it matters, I'm using Postfix for the MTA and using the Dovecot SASL library to AUTH SMTP. Is this a cause for concern? Why does Dovecot need this many processes? Thanks! Rodman

3 3

Re: [Dovecot] deliver does not update maildirsize
by ftriboix＠falcon-one.com 24 Jun '09

24 Jun '09

Hi Timo, Thank you very much for replying! > What does your configuration look like now? v1.1 has different quota > configuration. Is the problem only with deliver, or is imap also not > updating quota? And dovecot -n unfortunately doesn't show > protocol lda {} contents, so could you show them too? And finally, > enable mail_debug=yes and paste its logs when a message is delivered. mail_debug was already enabled, actually. maildirsize is not updated with imap now. If I logged in imap with dovecot 1.0.13, maildirsize was updated. This is not the case anymore with dovecot 1.1.16 ... I am actually realizing something. Do I need to add the "quota" plugin in the "protocol lda {}" section of dovecot.conf? Please find the configuration information below: # dovecot -n # 1.1.16: /etc/dovecot-1.1.16/dovecot.conf # OS: Linux 2.6.27.10-grsec-xxxx-grs-ipv4-32 i686 Debian 4.0 ext3 base_dir: /var/dovecot-1.1.16 log_path: /var/dovecot-1.1.16/log/errors.log info_log_path: /var/dovecot-1.1.16/log/info.log ssl_disable: yes disable_plaintext_auth: no login_dir: /var/dovecot-1.1.16/login login_executable: /usr/local/dovecot-1.1.16/libexec/dovecot/imap-login login_user: ldovecotlogin mail_location: maildir:/var/vmail/%d/%n mail_debug: yes mail_plugins: quota imap_quota auth default: mechanisms: plain login user: nobody chroot: /var/dovecot-1.1.16 verbose: yes debug: yes debug_passwords: yes passdb: driver: sql args: /etc/dovecot-1.1.16/dovecot-mysql-passdb.conf userdb: driver: sql args: /etc/dovecot-1.1.16/dovecot-mysql-userdb.conf socket: type: listen client: path: /var/postfix-2.5.1/private/auth.dovecot mode: 432 user: lpostfix group: lpostfix master: path: /var/dovecot-1.1.16/auth-master mode: 384 user: vmail group: vmail plugin: quota: maildir:Quota protocol lda { # Address to use when sending rejection mails. postmaster_address = postmaster@MyDomain # Hostname to use in various parts of sent mails, eg. in Message-Id. # Default is the system's real hostname. #hostname = # Support for dynamically loadable plugins. mail_plugins is a space separated # list of plugins to load. #mail_plugins = #mail_plugin_dir = /usr/lib/dovecot/lda # Binary to use for sending mails. #sendmail_path = /usr/lib/sendmail # UNIX socket path to master authentication server to find users. #auth_socket_path = /var/run/dovecot/auth-master log_path = /var/dovecot-1.1.16/log/delivery.log auth_socket_path = /var/dovecot-1.1.16/auth-master } # egrep '^deliver.test' info.log | tail deliver(test@MyDomain): Jun 24 13:28:35 Info: auth input: uid=5000 deliver(test@MyDomain): Jun 24 13:28:35 Info: auth input: gid=5000 deliver(test@MyDomain): Jun 24 13:28:35 Info: auth input: mail=maildir:/home/vmail/MyDomain/test deliver(test@MyDomain): Jun 24 13:28:35 Info: auth input: home=/home/vmail/MyDomain/test/home deliver(test@MyDomain): Jun 24 13:28:35 Info: auth input: quota=maildir:Quota deliver(test@MyDomain): Jun 24 13:28:35 Info: auth input: quota_rule=*:storage=1024 deliver(test@MyDomain): Jun 24 13:28:35 Info: auth input: quota_rule2=Trash:storage=50M deliver(test@MyDomain): Jun 24 13:28:35 Info: Home dir not found: /home/vmail/MyDomain/test/home deliver(test@MyDomain): Jun 24 13:28:35 Info: maildir: data=/home/vmail/MyDomain/test deliver(test@MyDomain): Jun 24 13:28:35 Info: maildir++: root=/home/vmail/MyDomain/test, index=, control=, inbox=/home/vmail/MyDomain/test deliver(test@MyDomain): Jun 24 13:28:35 Info: msgid=<290034.94281.qm(a)web24608.mail.ird.yahoo.com>: saved mail to INBOX deliver(test@MyDomain): Jun 24 16:59:57 Info: auth input: uid=5000 deliver(test@MyDomain): Jun 24 16:59:57 Info: auth input: gid=5000 deliver(test@MyDomain): Jun 24 16:59:57 Info: auth input: mail=maildir:/home/vmail/MyDomain/test deliver(test@MyDomain): Jun 24 16:59:57 Info: auth input: home=/home/vmail/MyDomain/test/home deliver(test@MyDomain): Jun 24 16:59:57 Info: auth input: quota=maildir:Quota deliver(test@MyDomain): Jun 24 16:59:57 Info: auth input: quota_rule=*:storage=1024 deliver(test@MyDomain): Jun 24 16:59:57 Info: auth input: quota_rule2=Trash:storage=50M deliver(test@MyDomain): Jun 24 16:59:57 Info: Home dir not found: /home/vmail/MyDomain/test/home deliver(test@MyDomain): Jun 24 16:59:57 Info: maildir: data=/home/vmail/MyDomain/test deliver(test@MyDomain): Jun 24 16:59:57 Info: maildir++: root=/home/vmail/MyDomain/test, index=, control=, inbox=/home/vmail/MyDomain/test deliver(test@MyDomain): Jun 24 16:59:57 Info: msgid=<542353.92671.qm(a)web24614.mail.ird.yahoo.com>: saved mail to INBOX # cat maildirsize 1048576S 1846384 10 Best regards, Fabrice

2 2

[Dovecot] Quota_rules ignored
by A. Gideonse 24 Jun '09

24 Jun '09

Today I upgraded to version 1.1.16 of Dovecot (and Sieve), because I wanted to use mailbox quotas. I tried using the instructions on http://wiki.dovecot.org/Quota/1.1 and simular websites for 4 hours now, but it seems that all quota_rules are ignored. Also, whenever I use a '*' in my MySQL query I get the error: 'unknown quota backend'. With the following query the quota from the database is used (if value is not NULL), but the quota_rules are ignored once again: user_query = SELECT maildir AS home, 5000 AS uid, 5000 AS gid, CONCAT('maildir:storage=', quota) AS quota FROM mailbox WHERE username = '%u' Below is my configuration: # 1.1.16: /etc/dovecot/dovecot.conf # OS: Linux 2.6.24-19-virtual i686 Ubuntu 8.04.1 nfs log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap imaps pop3 pop3s ssl_disable: yes disable_plaintext_auth: no login_dir: /usr/local/var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login mail_privileged_group: mail mail_location: maildir:/data/vmail/%d/%n mail_debug: yes mmap_disable: yes dotlock_use_excl: no mbox_write_locks: fcntl mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(pop3): quota mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 auth default: mechanisms: plain login debug: yes passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: passwd userdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: static args: uid=5000 gid=5000 home=/home/vmail/%d/%n allow_all_users=yes socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vmail plugin: quota: maildir:User quota quota_rule: *:storage=1G quota_rule2: .Trash:storage=100M Any thoughts on how to solve this problem? Thanks in advance!

3 14

[Dovecot] deliver does not update maildirsize
by ftriboix＠falcon-one.com 24 Jun '09

24 Jun '09

Hello, I have installed postfix 2.5.1 + dovecot 1.0.13 + MySQL and it all works perfectly. I use deliver as the local delivery agent and use IMAP only with maildir mailboxes. I am using virtual mailboxes. Now I wanted to introduce quotas, but I can't manage to make them work. Quota information is retreived from MySQL in userdb requests. I have noticed that the maildirsize file is not updated by deliver when a new mail comes in. I don't know if this is correct or not... It is updated though when I log in. But even then mails are still received without any kind of problem while the mailbox is well over the quota. I tried to add a "-v" option to deliver in postfix's master.cf to debug deliver, but it apparently does not like this option. Please find below my postfix and dovecot's configurations. Thank you very much for any help. NB: I removed some sensitive configuration option for this email NB2: The user in question has a quota of 1MB # postconf -n alias_maps = mysql:/etc/postfix-2.5.1/mysql-localalias.cf append_at_myorigin = no append_dot_mydomain = no biff = no command_directory = /usr/local/postfix-2.5.1/sbin config_directory = /etc/postfix-2.5.1 daemon_directory = /usr/local/postfix-2.5.1/libexec data_directory = /var/postfix-2.5.1/data debug_peer_level = 2 html_directory = /usr/local/postfix-2.5.1/doc/html mail_owner = lpostfix mail_spool_directory = /var/mail mailq_path = /usr/local/postfix-2.5.1/bin/mailq manpage_directory = /usr/local/postfix-2.5.1/man mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain mydomain = MyHostingDomain myhostname = MyMachine.MyHostingDomain mynetworks_style = host myorigin = $mydomain newaliases_path = /usr/local/postfix-2.5.1/bin/newaliases queue_directory = /var/postfix-2.5.1 readme_directory = /usr/local/postfix-2.5.1/doc/text relay_domains = relayhost = [MyRelayHost] sample_directory = /etc/postfix-2.5.1 sendmail_path = /usr/sbin/sendmail setgid_group = lpostdrop smtp_sasl_auth_enable = yes smtp_sasl_password_maps = hash:/etc/postfix-2.5.1/tmp-sasl-pwd smtp_sasl_security_options = noanonymous smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_non_fqdn_hostname, reject_non_fqdn_sender, reject_non_fqdn_recipient, reject_unauth_destination, reject_unauth_pipelining, reject_invalid_hostname smtpd_sasl_auth_enable = yes smtpd_sasl_local_domain = $myhostname smtpd_sasl_path = private/auth.dovecot smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot syslog_facility = local0 unknown_local_recipient_reject_code = 550 virtual_alias_maps = mysql:/etc/postfix-2.5.1/mysql-alias.cf,mysql:/etc/postfix-2.5.1/mysql-global-alias.cf,mysql:/etc/postfix-2.5.1/mysql-email2email.cf virtual_gid_maps = static:5000 virtual_mailbox_domains = mysql:/etc/postfix-2.5.1/mysql-domain.cf virtual_mailbox_maps = mysql:/etc/postfix-2.5.1/mysql-mailbox.cf virtual_transport = dovecot virtual_uid_maps = static:5000 # cat master.cf # # Postfix master process configuration file. For details on the format # of the file, see the master(5) manual page (command: "man 5 master"). # # Do not forget to execute "postfix reload" after editing this file. # # ========================================================================== # service type private unpriv chroot wakeup maxproc command + args # (yes) (yes) (yes) (never) (100) # ========================================================================== smtp inet n - n - - smtpd #submission inet n - n - - smtpd # -o smtpd_tls_security_level=encrypt # -o smtpd_sasl_auth_enable=yes # -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #smtps inet n - n - - smtpd # -o smtpd_tls_wrappermode=yes # -o smtpd_sasl_auth_enable=yes # -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #628 inet n - n - - qmqpd pickup fifo n - n 60 1 pickup cleanup unix n - n - 0 cleanup qmgr fifo n - n 300 1 qmgr #qmgr fifo n - n 300 1 oqmgr tlsmgr unix - - n 1000? 1 tlsmgr rewrite unix - - n - - trivial-rewrite bounce unix - - n - 0 bounce defer unix - - n - 0 bounce trace unix - - n - 0 bounce verify unix - - n - 1 verify flush unix n - n 1000? 0 flush proxymap unix - - n - - proxymap proxywrite unix - - n - 1 proxymap smtp unix - - n - - smtp # When relaying mail as backup MX, disable fallback_relay to avoid MX loops relay unix - - n - - smtp -o smtp_fallback_relay= # -o smtp_helo_timeout=5 -o smtp_connect_timeout=5 showq unix n - n - - showq error unix - - n - - error retry unix - - n - - error discard unix - - n - - discard local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - n - - lmtp anvil unix - - n - 1 anvil scache unix - - n - 1 scache dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/local/dovecot-1.0.13/libexec/dovecot/deliver -f ${sender} -d ${recipient} # dovecot -n # 1.0.13: /etc/dovecot-1.0.13/dovecot.conf base_dir: /var/dovecot-1.0.13 log_path: /var/dovecot-1.0.13/log/errors.log info_log_path: /var/dovecot-1.0.13/log/info.log ssl_disable: yes disable_plaintext_auth: no login_dir: /var/dovecot-1.0.13/login login_executable: /usr/local/dovecot-1.0.13/libexec/dovecot/imap-login login_user: ldovecotlogin mail_location: maildir:/var/vmail/%d/%n mail_debug: yes maildir_copy_with_hardlinks: yes mail_plugins: quota imap_quota auth default: mechanisms: plain login user: nobody chroot: /var/dovecot-1.0.13 verbose: yes debug: yes debug_passwords: yes passdb: driver: sql args: /etc/dovecot-1.0.13/dovecot-mysql-passdb.conf userdb: driver: sql args: /etc/dovecot-1.0.13/dovecot-mysql-userdb.conf socket: type: listen client: path: /var/postfix-2.5.1/private/auth.dovecot mode: 432 user: lpostfix group: lpostfix master: path: /var/dovecot-1.0.13/auth-master mode: 384 user: vmail group: vmail plugin: quota: maildir:storage=10240:ignore=Trash # cat dovecot-mysql-passdb.conf driver = mysql connect = [ --- snip --- ] default_pass_scheme = PLAIN-MD5 password_query = SELECT password FROM view_vuser WHERE email = '%u' AND active = 1 # cat dovecot-mysql-passdb.conf driver = mysql connect = [ --- snip --- ] default_pass_scheme = PLAIN-MD5 user_query = SELECT 5000 AS uid, 5000 AS gid, CONCAT("maildir:", mail) AS mail, CONCAT(mail, "/home") AS home, CONCAT("maildir:storage=", quota_mb * 1024, ":ignore=Trash") AS quota FROM view_vuser WHERE email = '%u' AND active = 1 # ls -l maildirsize -rw------- 1 vmail vmail 20 2009-06-23 08:47 maildirsize # cat maildirsize 1048576S 1846384 10

3 3

[Dovecot] Dovecot Problem
by Robert Sloan 24 Jun '09

24 Jun '09

Every 2 or 3 days dovecot will not allow me to log into my IMAP server. It keeps requesting my username and password. If I do a /etc/init.d/dovecot restart it will start working again for a few days. I have dovecot set up to use Maildir. Dovecot Version: Not sure but it is the one that comes with Ubuntu 9.04 OS: Ubuntu 9.04 CPU: x86 Filesystem: Local EXT4 Dovecot Config: # 1.1.11: /etc/dovecot/dovecot.conf # OS: Linux 2.6.28-11-server i686 Ubuntu 9.04 log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap imaps pop3 pop3s disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login mail_privileged_group: mail mail_location: maildir:~/Maildir mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 auth default: passdb: driver: pam userdb: driver: passwd Thanks.

2 3

[Dovecot] Asked about Dovecot Logging
by Jose Luis Marin Perez 24 Jun '09

24 Jun '09

Dear Sirs, I was able to migrate successfully from Courier-Imap to Dovecot, Timo I appreciate your help. I have notices that the file /var/log/dovecot.log shows the following: dovecot: Jun 23 15:04:05 Info: imap-login: Login: user=<dtoledo>, method=PLAIN, rip=172.16.10.15, lip=172.16.10.19 dovecot: Jun 23 15:04:06 Info: imap-login: Login: user=<abonilla>, method=PLAIN, rip=172.16.10.14, lip=172.16.10.19 dovecot: Jun 23 15:04:06 Info: IMAP(abonilla): Disconnected: Logged out bytes=59/566 dovecot: Jun 23 15:04:06 Info: imap-login: Login: user=<slopez>, method=PLAIN, rip=172.16.10.14, lip=172.16.10.19 dovecot: Jun 23 15:04:06 Info: IMAP(slopez): Disconnected: Logged out bytes=59/567 dovecot: Jun 23 15:04:06 Info: IMAP(dtoledo): Disconnected: Logged out bytes=1252/34481 dovecot: Jun 23 15:04:07 Info: imap-login: Login: user=<slopez>, method=PLAIN, rip=172.16.10.14, lip=172.16.10.19 dovecot: Jun 23 15:04:07 Info: IMAP(slopez): Disconnected: Logged out bytes=59/567 dovecot: Jun 23 15:04:07 Info: IMAP(framirez): Disconnected: Logged out bytes=1252/34041 dovecot: Jun 23 15:04:08 Info: imap-login: Login: user=<mgomez>, method=PLAIN, rip=172.16.10.14, lip=172.16.10.19 dovecot: Jun 23 15:04:10 Info: IMAP(mgomez): Disconnected: Logged out bytes=1805/66570 dovecot: Jun 23 15:04:13 Info: imap-login: Login: user=<curibe>, method=PLAIN, rip=172.16.10.14, lip=172.16.10.19 dovecot: Jun 23 15:04:15 Info: IMAP(curibe): Disconnected: Logged out bytes=749/351591 Given that there are several domains hosted on the server, how can I configure Dovecot to the log file shows the full user name. Example: user=<user1(a)dominio1.com> user=<user2(a)dominio2.com> Thanks Jose Luis _________________________________________________________________ Invite your mail contacts to join your friends list with Windows Live Spaces. It's easy! http://spaces.live.com/spacesapi.aspx?wx_action=create&wx_url=/friends.aspx…

2 9

[Dovecot] Deliver, sieve and duplicate message
by jean-Noël Chardron 24 Jun '09

24 Jun '09

Hello, Some users subscribe to several mailing lists which causes them to have the same message several times what they do not want . Today we use procmail as delivery agent to discard duplicate message, we want to migrate to dovecot deliver + sieve I read a previous post about the duplicate messages : http://www.dovecot.org/list/dovecot/2007-March/021085.html But I do not understand if this feature exists and how to activate Some explanations or documentation would be welcome. thank you, -- Jean-Noel Chardron

2 1

[Dovecot] dovecot-antispam problem with sa-learn
by maxlosblob＠tiscali.it 24 Jun '09

24 Jun '09

Hi all, I just set up a dovecot+postfix+roundcubemail+spamassassin system with virtual users. These applications work fine, I have a problem with the dovecot-antispam plugin. Dovecot is compiled from tarball, version 1.1.16, the plugin is version 1.2. The problem is that when I move messages from or to "Posta indesiderata", which is in antispam_spam list, nothing happens. I have no logs about sa-learn activity in /var/log/maillog, nor in /var/log messages, no matter if I set DEBUG=syslog or DEBUG=stderr. Here are my confs: dovecot-antispam .config BACKEND=mailtrain USER=root GROUP=root DEBUG=syslog DEBUG_VERBOSE=5 PLUGINNAME=antispam dovecot -n # 1.1.16: /usr/local/etc/dovecot.conf # OS: Linux 2.6.18-sblob i686 CentOS release 5.2 (Final) simfs protocols: imap pop3 ssl_disable: yes disable_plaintext_auth: no login_dir: /usr/local/var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login last_valid_uid: 500 first_valid_gid: 500 last_valid_gid: 500 mail_location: maildir:/var/virtual/%d/%n/Posta mail_debug: yes mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable (pop3): /usr/local/libexec/dovecot/pop3 mail_plugins(default): listescape antispam mail_plugins(imap): listescape antispam mail_plugins (pop3): mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir (pop3): /usr/local/lib/dovecot/pop3 namespace: type: private separator: / inbox: yes list: yes subscriptions: yes auth default: passdb: driver: sql args: /etc/dovecot-sql.conf userdb: driver: static args: uid=500 gid=500 home=/var/virtual/% d/%u plugin: antispam_trash: trash;Trash;Deleted Items;Cestino; antispam_spam: Spam;Posta indesiderata;.Posta indesiderata;SPAM;.SPAM antispam_mail_sendmail: /usr/bin/sa-learn antispam_mail_spam: --spam antispam_mail_notspam: --ham antispam_mail_tmpdir: /tmp Thanks in advance Max Non rinunciare ai tuoi ricordi...Tiscali Photo affronta la crisi con incredibili offerte http://photo.tiscali.it

2 1

[Dovecot] v1.2.rc6 released
by Timo Sirainen 24 Jun '09

24 Jun '09

http://dovecot.org/releases/1.2/rc/dovecot-1.2.rc6.tar.gz http://dovecot.org/releases/1.2/rc/dovecot-1.2.rc6.tar.gz.sig I think it's time to get v1.2.0 released soon. There is apparently still one rare crashing bug in virtual plugin, but unless someone can reproduce the bug I'm not going to delay v1.2.0 because of it. The release plan is: - Release v1.2.rc7 next Friday (assuming there have been some fixes) - Release v1.2.0 the next Monday I'll be giving a Dovecot talk in Berlin on July 2nd, and I really want to have v1.2.0 released by them. So July 1st is the absolute final deadline for v1.2.0. :) Changes since rc5: * imap proxy: Pass through to client unexpected untagged replies from remote server (e.g. alerts). * Solr: Don't use "any" copyfield, it doubles the index size. * mail_location: Allow using ":" characters in dir names by escaping it as "::". - mbox: Don't crash with invalid From_-lines. - IMAP: Don't crash if IDLE command is pipelined after a long-running UID FETCH or UID SEARCH. - ACL / shared mailbox fixes - Some metadata files were incorrectly getting 0666 permissions.

4 3

[Dovecot] courier-imap 2 Dovecot Migration
by Odhiambo ワシントン 24 Jun '09

24 Jun '09

I have a question about migration from courier-imap. I have a server running courier-imap which I'd like to change to dovecot. The problem at hand is that there are POP3 users as well as IMAP4 users.Some of the POP3 users have the option to "leave a copy of the message on the server" set in their MuAs. Is it possible to migrate from courier-imap --> Dovecot and not have these people re fetching all their old e-mails all over again? -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254733744121/+254722743223 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ "If you have nothing good to say about someone, just shut up!." -- Lucky Dube

2 1

[Dovecot] tcp_wrappers
by listmail 23 Jun '09

23 Jun '09

Hi, I've just started using Dovecot (v1.1.14), and I'm noticing a lot of dictionary attacks. I searched through the documentation and the mailing list archives hoping to find support for tcp_wrappers (hosts.deny) support. I did find some suggested patches in the list from last year, but as far as I can tell, there is no support in the released versions. Is this implemented and undocumented, or just unimplemented? I would be surprised to find it unimplemented in such an otherwise sophisticated project. Thanks in advance, --Bill

4 3

[Dovecot] A X-Mailbox header?
by Alessandro Ranellucci 23 Jun '09

23 Jun '09

Hi all, I'm waiting for the virtual mailbox feature in order to make a single POP3 access to retrieve messages contained in all my mailbox folders. This is because I use webmail and other IMAP clients but my main workstation uses a POP3-only client. I was wondering if there's a way to keep the name of the folder containing each message while retrieving via POP3. I guess this could be done by dynamically adding a header to messages at retrieval time. Is there a feature for this or a plugin API? Otherwise I was thinking about modifying the messages themselves on the server using a script. However, such a script would need to be run when a IMAP user moves a message to a folder and I believe Dovecot doesn't provide a trigger/hook mechanism. I also don't know if modifying stored messages is allowed since it could break some caching/hashing mechanism. Do you have any idea for this? Thanks in advance and thanks to Timo for the great work! - alessandro.

2 5

[Dovecot] Dovecot failing to start
by dovecot＠corwyn.net 23 Jun '09

23 Jun '09

So I rebooted my mail server, and now dovecot fails to start with: Stopping Dovecot Imap: [FAILED] Starting Dovecot Imap: Fatal: listen(::, 143) failed: Address already in use [FAILED] [root@agencymail postfix]# dovecot -n # 1.1.8: /etc/dovecot.conf # OS: Linux 2.6.18-92.el5 i686 Red Hat Enterprise Linux Server release 5.2 (Tikanga) ext3 ssl_cert_file: /etc/httpd/certs/agencymail_example_com.crt ssl_key_file: /etc/httpd/certs/agencymail.example.com.key.no.password login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login login_max_processes_count: 256 mail_uid: 1015 mail_gid: 105 mail_location: maildir:/var/spool/mail/%d/%n/Maildir mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugins(default): acl quota imap_quota expire trash mail_plugins(imap): acl quota imap_quota expire trash mail_plugins(pop3): expire quota mail_plugin_dir(default): /usr/lib/dovecot/imap mail_plugin_dir(imap): /usr/lib/dovecot/imap mail_plugin_dir(pop3): /usr/lib/dovecot/pop3 imap_client_workarounds(default): delay-newmail outlook-idle imap_client_workarounds(imap): delay-newmail outlook-idle imap_client_workarounds(pop3): pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh dict_db_config: /etc/dovecot-db.conf auth default: mechanisms: plain login passdb: driver: sql args: /etc/dovecot-sql.conf userdb: driver: passwd userdb: driver: sql args: /etc/dovecot-sql.conf userdb: driver: static socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vuser group: vuser plugin: quota: maildir quota_rule: *:storage=102400000 quota_rule2: Trash:storage=100M acl: vfile:/etc/dovecot/acls trash: /etc/dovecot-trash.conf expire: Trash 14 Trash/* 14 Spam 14 expire_dict: proxy::expire dict: expire: mysql:/etc/dovecot-dict-expire.conf Rick Steeves http://www.sinister.net "The more I learn, it seems, the less I know." Frazz

2 2

[Dovecot] Problem migration from Courier-Imap to Dovecot
by Jose Luis Marin Perez 23 Jun '09

23 Jun '09

Dear friends, My intention is to migrate from Courier-Imap Dovecot 4.4.1 to 1.1.16, the problem is that I've noticed that when creating folders using the Courier does not create the file courierimapsubscribed therefore I doubt if this will bring me problems trying to perform the migration script by courier-dovecot-migrate.pl drwx------ 8 vpopmail vchkpw 4096 Jun 18 16:38 . drwx------ 3 vpopmail vchkpw 4096 Jun 18 09:32 .. drwx------ 2 vpopmail vchkpw 4096 Jun 18 16:36 courierimapkeywords -rw-r--r-- 1 vpopmail vchkpw 265566 Jun 18 16:36 courierimapuiddb drwx------ 2 vpopmail vchkpw 593920 Jun 16 10:05 cur drwx------ 2 vpopmail vchkpw 4096 Jun 18 09:32 new drwx------ 6 vpopmail vchkpw 4096 Jun 18 16:38 .Personal drwx------ 6 vpopmail vchkpw 4096 Jun 18 16:38 .RPV drwx------ 2 vpopmail vchkpw 4096 Jun 18 16:41 tmp Please could help me with this problem because I do not have much experience in this type of migration. Thanks Jose Luis _________________________________________________________________ Discover the new Windows Vista http://search.msn.com/results.aspx?q=windows+vista&mkt=en-US&form=QBRE

2 10

[Dovecot] CRAM-MD5 authentication but plain-md5 password storage.
by Richard 22 Jun '09

22 Jun '09

Hi all, Got a question on configuring dovecot, I'm still new at this so I might be doing this all wrong. I want dovecot to authenticate the mail client using CRAM-MD5 so I've setup the config in dovecot.conf: auth default { mechanisms = cram-md5 passdb sql { # Path for SQL configuration file, see doc/dovecot-sql-example.conf args = /etc/dovecot/dovecot-sql.conf } <snipped> } In my dovecot-sql.conf I've setup the password scheme to be: default_pass_scheme = MD5 Somehow this does not work, the error I see in the logfile is: auth-worker(default): password(info(a)richard5.tld,127.0.0.1): Requested CRAM-MD5 scheme, but we have only MD5 Is there a way to get this working or does this feature only works with passwords stored in plain text ? Thanks! Richard

2 3

[Dovecot] dedup in dovecot?
by Roy Sigurd Karlsbakk 22 Jun '09

22 Jun '09

Hi all Deduplicating data is not really a new thing, but quite efficient in mail systems where an email with an nMB attachment may be sent to multiple recipients. This might call for deduplicating data. Is there a way to do this, or is it far off? If I understand the system correctly, usually an MTA is calling dovecot on every single message, meaning the message itself won't necessarily be a duplicate in terms of headers (BCCs and so on). Would it be possible to dedup the content in terms of using separate files for the header and content and then deduping this with hard or symbolic links? Sorry if this is an old question, but I couldn't find anything about it. roy -- Roy Sigurd Karlsbakk (+47) 97542685 roy(a)karlsbakk.net http://blogg.karlsbakk.net/ -- I all pedagogikk er det essensielt at pensum presenteres intelligibelt. Det er et elementært imperativ for alle pedagoger å unngå eksessiv anvendelse av idiomer med fremmed opprinnelse. I de fleste tilfeller eksisterer adekvate og relevante synonymer på norsk.

3 3

[Dovecot] Dovecot v1.2 share user Maildir problems with %%h
by Steffen Kaiser 22 Jun '09

22 Jun '09

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, I'm using Dovecot v1.2 9133:f65112bd90b3 with attached config and try to share user Maildirs. The ACLs are working. However the %%h gives me head aches, well, the location in general: I've copied the default mail_location and changed its CONTROL and INDEX settings: namespace shared { ... location = maildir:%%h/Maildir:CONTROL=/var/cache/dovecot/%i/control/shared/%%u:INDEX=/var/cache/dovecot/%i/index/shared/%%u } Now the first wows are that: a) IMAP insists to connect to $install_prefix/var/run/dovecot/auth-master instead of /var/run/dovecot/auth-master used by deliver. My workaround was to symlink /var/run/dovecot/ to $install_prefix/var/run/dovecot/ b) This socket needs to be r/w for every user, which is a security risk as mentioned in the conf and the default permission is 0600. For deliver I changed the socket attr to permission 0660 and group=mail; for making %%h work I added mail_access_groups=mail c) The user's mailbox is not found still, because: 2009-06-17 15:04:57 auth(default): Info: master in: USER 1 testusr/INBOX service=internal 2009-06-17 15:04:57 auth(default): Info: auth(?): Invalid username: testusr/INBOX 2009-06-17 15:04:57 auth(default): Info: userdb(?): Username contains disallowed character: 0x2f 2009-06-17 15:04:57 auth(default): Info: master out: NOTFOUND 1 The imap process passes the mailbox to the authentificator, too. Also, it changes the '.' to '/', although rawlog has: select "shared.testusr.INBOX" If I allow "/" as userchar, I get: 2009-06-17 15:43:00 auth(default): Info: ldap(testusr/INBOX): Unknown user 2009-06-17 15:43:00 auth(default): Info: master out: NOTFOUND 1 It reallt requests the data of user "testusr/INBOX". d) If I use location = maildir:/home/%%u/Maildir: instead of %%h/Maildir, things work _except_ that some user's %%h != /home/%%u . ============== Basically I have yet another problem with location in the user-share namespace: Because one can override the default mail_location for each user, I did so for some users. Some of them even do not have the Maildir. That leads to the problem, that I need one shared namespace for each location template. There had been a suggestion of a special user-shared namespace a while back. How about to add the base location in the shared-mailboxes.db? So instead of "1" the value is the base of the shared location, e.g. maildir:/local/testuser or maildir:/home/user/Maildir..., and some %%? token takes the string from there. Because the path is known from the db now, the other problems mentioned above do no longer apply. Bye, - -- Steffen Kaiser -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) iQEVAwUBSjj/63WSIuGy1ktrAQLliQf9E/fh9BK+5eeHfiJBwfD1kGfP7AYc4CwE Kj6Snkq/eG05F7VM5TyANDZVNFpGY0WsNkmQHutx3OSfh+gVe2gxNljk7KdISMpC 7+PS1Rsnz+0iqq6ueCbs7LGNQCgZyD9Ne14XTzRymJJElw7MfHh7A6+Zhul+CzTL 4D7owW+vcyOVBMY9G2e978MkzXXWQ0zDBHamjeFm4idx4Bl1sbMOuqpWHCse+sP8 XET58VXOMI1LBsrdgoobXRGojLFxZe7r77lSrTkUprFa3ljOsYIIxOEk6mskELue SAftwNlqbkHMAwZQ0G0rlD6vBdyw7B3sN48yFoLEd/cw1SyttVrCdA== =vC9k -----END PGP SIGNATURE-----

2 5

Re: [Dovecot] How do I get my mail from fetchmail into dovecot
by Michael Steinbeck-Reeves 22 Jun '09

22 Jun '09

> Message: 3 > Date: Wed, 29 Apr 2009 16:53:49 +0300 > From: Odhiambo ????? <odhiambo(a)gmail.com> > Subject: Re: [Dovecot] How do I get my mail from fetchmail into > dovecot? > To: Dovecot Mailing List <dovecot(a)dovecot.org> > Message-ID: > <991123400904290653g205c603m2e4b511486a69b52(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > On Wed, Apr 29, 2009 at 4:46 PM, Michael Steinbeck-Reeves < > michael(a)steinbeck-reeves.uk.com> wrote: > > > I have dovecot (with squirrel mail etc.) running without any problems > > but cannot understand how to get e-mail from a pop server into dovecot. > > I have fetchmail configured to pick up the mail from the pop3 server but > > don't understand how to get it from there into my dovecot mbox > > > Where does fetchmail put the e-mails? > Point dovecot there with "mail_location =..." then use your favorite MuA to > access the e-mail. That is the problem, fetchmail just forwards it to port 25 (I think) and I need to work out what to put between fetchmail and dovecot in order to get the mail into the correct folders... And I am just going around in circles on this at the moment. Any hint would be appreciated! Thanks, Michael

6 6

[Dovecot] POP3 -ERR Authentication failed.
by Tariq Ismail Dalvi 22 Jun '09

22 Jun '09

Hello guys I am having problem of pop3 with my mail server I am using postfix-2.3.3 and Dovecot v1.0.7 when i telnet localhost or xyz.net i get following output [root@dalvis ~]# telnet mail.xyz.net 110 Trying 192.168.12.14... Connected to mail.xyz.net (192.168.12.14). Escape character is '^]'. +OK Dovecot ready. user johne(a)xyz.net +OK pass 768tidzx -ERR Authentication failed. Connection closed by foreign host. and my maillog shows Jun 21 19:25:20 localhost dovecot: pop3-login: Aborted login: user=<johne(a)xyz.net>, method=PLAIN, rip=::ffff:192.168.12.14, lip=::ffff:192.168.12.14, secured my dovecot.conf is as follow:- # Remove pop3 things if you don't want them protocols = imap imaps pop3 pop3s # It's nice to have separate log files for Dovecot. You could do this # by changing syslog configuration also, but this is easier. log_path = /var/log/dovecot.log info_log_path = /var/log/dovecot-info.log # Disable SSL for now. ssl_disable = yes disable_plaintext_auth = no # We're using Maildir format mail_location = maildir:~/Maildir # If you're using POP3, you'll need this: pop3_uidl_format = %08Xu%08Xv # Optimizations: dotlock_use_excl=yes maildir_copy_with_hardlinks=yes # Authentication configuration: auth_verbose = yes auth default { mechanisms = plain passdb passwd-file { args = /etc/dovecot/passwd } userdb static { args = uid=vmail gid=vmail home=/var/mail/vmail/%d/%u } } I shall highly appreciate if anyone shall have a look at it and let me know what i am doing wrong. Thank you Best regards. Supports Team Leader tariq(a)dalvis.net tariq(a)unitedinfotechs.net tariqdalvi(a)gmail.com Mobile : 9769681727 Tel : 22 26319389

3 2

[Dovecot] exceeds the global size limit
by Pawel Eljasz 22 Jun '09

22 Jun '09

hi all, I cannot come up if anything sensible? I get this message when I'm sending and quota plugins are disabled, no fs quotas? ... ??? cheers

2 2

[Dovecot] ldap , quotes, upgrade from dovecot-1.0.14 (q2.0)
by razor razor 22 Jun '09

22 Jun '09

hello list help me please - i am trying to fix quotas about 2 days :( i was using 1.0.14+ldap as userdb/passwd+lda+exim, and after upgrading to last release my quotas goes away so > pkg_info | grep dove dovecot-1.1.16 Secure and compact IMAP and POP3 servers dovecot-sieve-1.1.6 A Sieve plugin for the Dovecot 'deliver' LDA dovecot.conf ... protocol imap { listen = *:143 ssl_listen = *:993 mail_plugin_dir = /usr/local/lib/dovecot/imap mail_plugins = quota imap_quota login_executable = /usr/local/libexec/dovecot/imap-login login_greeting_capability = yes imap_client_workarounds = delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep } ... protocol lda { postmaster_address = postmaster at lg.informjust.ua # mail_plugins = cmusieve quota mail_plugin_dir = /usr/local/lib/dovecot/lda mail_plugins = quota ... auth default { mechanisms = plain socket listen { master { path = /var/run/dovecot/auth-master mode = 0700 user = mailnull group = mail } } passdb ldap { args = /usr/local/etc/dovecot-ldap.conf } userdb prefetch { } userdb ldap { args = /usr/local/etc/dovecot-ldap.conf } user = mailnull } plugin { #########quota = maildir:storage=20240 quota = maildir:User quota quota_rule = maildir:storage=500000K ####quota_rule = *:bytes=500000K ####quota_rule = maildir:storage=50240K #####new for 1.1 ver quota_overide = *:storage=20M } ============================ dovecot-ldap.conf ... ldap_version = 3 ... #WAS IN 1.0.14 VER #for deliver #user_attrs = uid,,,homeDirectory=home,uidNumber=uid,gidNumber=gid,boxQuota=quota=dirsize:storage,status user_attrs = homeDirectory=home,uidNumber=uid,gidNumber=gid,boxQuota=quote_rule=maildir:storage=%$K,status user_filter = (&(objectClass=posixAccount)(uid=%u)) pass_attrs = uid=user,,,homeDirectory=userdb_home,uidNumber=userdb_uid,gidNumber=userdb_gid,boxQuota=userdb_quota=maildir:storage=%$K,userPassword=password,status=userdb_status pass_filter = (&(objectClass=posixAccount)(uid=%u)) ================= plan is: 1. if there is a quota in ldap (boxQuota) - we use it 2. if not - quota_rule = maildir:storage=500000K but in real world i have : in my box maildirsize : 512000000S <----------- not 300 mb from my ldap 188854660 1623 1245 1 but in dovecot.log: dovecot: Jun 16 11:00:03 Info: auth(default): ldap(XXXXXXXX,10.2.29.1): pass search: base=cn=XX,dc=XX,dc=lg scope=subtree filter=(&(objectClass=posixAccount)(uid=XXXXXXXX)) fields=uid,homeDirectory,uidNumber,gidNumber,boxQuota,userPassword,status dovecot: Jun 16 11:00:03 Info: auth(default): ldap(XXXXXXXX,10.2.29.1): result: uid(user)=XXXXXXXX uidNumber(userdb_uid)=26 g idNumber(userdb_gid)=6 homeDirectory(userdb_home)=/nonexistent status(userdb_status)=True userPassword(password)=irfaxbr boxQuota(userdb_quota=maildir:storage=%$K)=maildir:storage=50000K <---- CORRECT!! dovecot: Jun 16 11:00:03 Info: auth(default): client out: OK 1 user=XXXXXXXX dovecot: Jun 16 11:00:03 Info: auth(default): master in: REQUEST 219 96373 1 dovecot: Jun 16 11:00:03 Info: auth(default): prefetch(XXXXXXXX,10.2.29.1): success dovecot: Jun 16 11:00:03 Info: auth(default): master out: USER 219 perevdvs uid=26 gid=6 home=/nonexistent status=True quota=maildir:storage=50000K dovecot: Jun 16 11:00:03 Info: imap-login: Login: user=<XXXXXXXX>, method=PLAIN, rip=10.2.29.1, lip=10.2.29.1, secured dovecot: Jun 16 11:00:03 Info: IMAP(perevdvs): Connection closed bytes=50/96360 and in dovecot-delivery.log: deliver(vrog): Jun 16 13:08:08 Info: Loading modules from directory: /usr/local/lib/dovecot/lda deliver(vrog): Jun 16 13:08:08 Info: Module loaded: /usr/local/lib/dovecot/lda/lib10_quota_plugin.so deliver(vrog): Jun 16 13:08:08 Info: auth input: uid=26 deliver(vrog): Jun 16 13:08:08 Info: auth input: gid=6 deliver(vrog): Jun 16 13:08:08 Info: auth input: home=/nonexistent deliver(vrog): Jun 16 13:08:08 Info: auth input: status=True deliver(vrog): Jun 16 13:08:08 Info: auth input: quote_rule=*:storage=50000K <-----CORRECT deliver(vrog): Jun 16 13:08:08 Info: Home dir not found: /nonexistent deliver(vrog): Jun 16 13:08:08 Info: Quota root: name=User quota backend=maildir args= deliver(vrog): Jun 16 13:08:08 Info: Quota rule: root=User quota mailbox=maildir bytes=512000000 messages=0 <-----NOT CORRECT deliver(vrog): Jun 16 13:08:08 Info: Namespace: type=private, prefix=, sep=, inbox=yes, hidden=no, list=yes, subscriptions=ye s deliver(vrog): Jun 16 13:08:08 Info: maildir: data=/XXXX/Maildir deliver(vrog): Jun 16 13:08:08 Info: maildir++: root=/XXXX/Maildir, index=, control=, inbox= /XXX/Maildir what am i doing wrong? -- Using Opera's revolutionary e-mail client: http://www.opera.com/mail/

3 7

[Dovecot] auth_cache multiple passwords ?
by Geoffroy Desvernay 22 Jun '09

22 Jun '09

Hi, First, thanks Timo and Stefan for this great IMAP/Sieve implementation... We are using 1.1.16+cmu_sieve/managesieve additions for now (following releases since ~ 1.0.1). We have a specific problem here with auth-cache: We use direct imap/sieve connection from different clients, using LDAP password: everything is fine. The problem appears with our webmail access using a web-SSO system (jasig's CAS), using one-time-tickets as password for imap connections (checked by pam_cas module for now). For a single webmail connection par login, it work, thanks to cache_key using client's IP. But for multiple use of the same login in the webmail, there are more than one 'password' valid at a time… What may be the 'correct' solution: - patching auth-cache.c (auth_cache_lookup function ?) - writing a different login backend ? - ??? Hope I'm clear enough… -- geoffroy desvernay Ecole Centrale de Marseille

2 4

[Dovecot] dovecot-acl file questions
by Steffen Kaiser 22 Jun '09

22 Jun '09

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, playing around with Dovecot's v1.2 ACLs I wondered about some things about the dovecot-acl files: + They are created within the Maildirs, as described in http://wiki.dovecot.org/ACL. But why? Shouldn't they belong to the CONTROL= directories? So it is more compatible with filesystem quota. + They have 0666 permissions, but all other files (e.g. when I create a new mailbox) have 0660 permissions. Are the permissions selected explicitly to allow "a"-right for other (system) users? + When one removes all rights, the size of the file drops to zero. The wasted space is no great deal; but how much processing is wasted if such file is present? I mean, the log says that the files are opened very regularily. Would it help to remove zero-size files? Regards, - -- Steffen Kaiser -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) iQEVAwUBSjdoh3WSIuGy1ktrAQKlfQf/X6jxEKTINNwdiFAYq7XEW78Lgjf7FDNc xK3PnT8Opz+4yCiWxDSlUSJPjdc2csTIimR1ZKDn2hUN54jcfJBt6U6bWKPl6rvB Fyycsnx3ONNiYBaqcIoFG4LWGk+QLnXZaVWdCVil2Pn3LotW2Unxe26d51pvt38Q N8dXyyv1yaCpIBzhgFYyn0J7DZxM8HzWUVZNybXGnwm1u13GPf+g7pMlAcF0wNsQ 6gSrFVmu3tzp5FF+3v5rb7GVMAYyLeKeZkzDBOQetuNCkUrUcY3qqYplwKEHvLe5 70e69zh7epGPw9UiSV/FJm+Q/GStz7T7vl7hdoO+WHeJcDhX/IXFBg== =XTLy -----END PGP SIGNATURE-----

2 2

[Dovecot] Dovecot v1.2 assert() in ACL
by Steffen Kaiser 22 Jun '09

22 Jun '09

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, using Dovecot v1.2 changeset: 9126:b745911012bb ACL config: acl = vfile # To let users LIST mailboxes shared by other users, Dovecot needs a # shared mailbox dictionary. For example: acl_shared_dict = file:/var/cache/dovecot/shared-mailboxes telnet localhost imap 0 login .... 1 getacl Sent * ACL "Sent" "testuser" lrwstipekxacd 1 OK Getacl completed. 2 setacl Sent timo +lrwtsd 2 OK Setacl complete. 3 setacl Sent timo -lrwtsd Aborted (core dumped) cat /var/cache/dovecot/shared-mailboxes shared/shared-boxes/user/timo/testuser 1 === The assert happens when the last right is to remove: setacl I user +lwp setacl I user -l setacl I user -w setacl I user -p Abort === log: Panic: file ../../../src/lib/array.h: line 162 (array_idx_i): assertion failed: (idx * array->element_size < array->buffer->used) Raw backtrace: imap [0x80e9ed0] -> imap(i_syslog_fatal_handler+0x2d) [0x80e9f6d] -> imap [0x80e97da] -> /usr/local/dovecot-1.2.rc5unpatched/lib/dovecot/imap/lib01_acl_plugin.so [0xb7e4ede4] -> /usr/local/dovecot-1.2.rc5unpatched/lib/dovecot/imap/lib01_acl_plugin.so [0xb7e4ee40] -> /usr/local/dovecot-1.2.rc5unpatched/lib/dovecot/imap/lib01_acl_plugin.so [0xb7e50c3b] -> /usr/local/dovecot-1.2.rc5unpatched/lib/dovecot/imap/lib01_acl_plugin.so(acl_object_update+0x18) [0xb7e4de98] -> /usr/local/dovecot-1.2.rc5unpatched/lib/dovecot/imap/lib02_imap_acl_plugin.so [0xb7f951cf] -> imap [0x8063dbc] -> imap [0x8063e6b] -> imap(client_handle_input+0x3f) [0x8063fbf] -> imap(client_input+0x5f) [0x8064b2f] -> imap(io_loop_handler_run+0x110) [0x80f2a10] -> imap(io_loop_run+0x28) [0x80f1ad8] -> imap(main+0x764) [0x806cf34] -> /lib/tls/i686/cmov/libc.so.6(__libc_start_main+0xc8) [0xb7e6eea8] -> imap [0x805cb71] (gdb) bt full #0 0xb7f99410 in ?? () No symbol table info available. #1 0xbfe106ac in ?? () No symbol table info available. #2 0x00000006 in ?? () No symbol table info available. #3 0x000054a6 in ?? () No symbol table info available. #4 0xb7e82811 in raise () from /lib/tls/i686/cmov/libc.so.6 No symbol table info available. #5 0xb7e83fb9 in abort () from /lib/tls/i686/cmov/libc.so.6 No symbol table info available. #6 0x080e9edd in default_fatal_finish (type=<value optimized out>, status=0) at failures.c:160 backtrace = 0x81205e0 "imap [0x80e9ed0] -> imap(i_syslog_fatal_handler+0x2d) [0x80e9f6d] -> imap [0x80e97da] -> /usr/local/dovecot-1.2.rc5unpatched/lib/dovecot/imap/lib01_acl_plugin.so [0xb7e4ede4] -> /usr/local/dovecot-1.2"... #7 0x080e9f6d in i_syslog_fatal_handler (type=LOG_TYPE_PANIC, status=0, fmt=0xb7e55714 "file %s: line %d (%s): assertion failed: (%s)", args=0xbfe10854 "\"Y?") at failures.c:315 No locals. #8 0x080e97da in i_panic ( format=0xb7e55714 "file %s: line %d (%s): assertion failed: (%s)") at failures.c:207 args = 0xbfe10854 "\"Y?" #9 0xb7e4ede4 in modify_right_list (pool=0x8154330, rightsp=0x8154450, modify_rights=0x8120338, modify_mode=ACL_MODIFY_MODE_REMOVE) at ../../../src/lib/array.h:162 old_rights = (const char * const *) 0x8154360 new_rights = (const char * const *) 0xbfe10894 null = 0x0 #10 0xb7e4ee40 in vfile_object_modify_right (aclobj=0x81542d0, idx=0, update=0xbfe10a2c) at acl-backend-vfile.c:940 c1 = 74 c2 = <value optimized out> #11 0xb7e50c3b in acl_backend_vfile_object_update (_aclobj=0x81542d0, update=0xbfe10a2c) at acl-backend-vfile.c:1099 str = <value optimized out> i = <value optimized out> ret = <value optimized out> output = <value optimized out> rights = <value optimized out> aclobj = (struct acl_object_vfile *) 0x0 dotlock = <value optimized out> path = <value optimized out> i = 0 fd = 7 changed = <value optimized out> __PRETTY_FUNCTION__ = "acl_backend_vfile_object_update" #12 0xb7e4de98 in acl_object_update (aclobj=0x81542d0, update=0xbfe10a2c) at acl-api.c:137 No locals. #13 0xb7f951cf in cmd_setacl (cmd=0x8130a10) at imap-acl-plugin.c:574 ns = (struct mail_namespace *) 0x8129988 storage = <value optimized out> box = (struct mailbox *) 0x8154f88 backend = (struct acl_backend *) 0x812e2f0 update = {rights = {id_type = ACL_ID_USER, identifier = 0x8135b18 "timo", rights = 0x8120338, neg_rights = 0x0, global = 0}, modify_mode = ACL_MODIFY_MODE_REMOVE, neg_modify_mode = ACL_MODIFY_MODE_REMOVE} mailbox = 0x8135b10 "Sent" identifier = 0x8135b18 "timo" rights = 0x8135b21 "lrwtsd" error = <value optimized out> negative = false #14 0x08063dbc in client_command_input (cmd=0x8130a10) at client.c:607 client = (struct client *) 0x812f748 command = <value optimized out> __PRETTY_FUNCTION__ = "client_command_input" #15 0x08063e6b in client_command_input (cmd=0x8130a10) at client.c:656 client = (struct client *) 0x812f748 command = (struct command *) 0x54a6 __PRETTY_FUNCTION__ = "client_command_input" #16 0x08063fbf in client_handle_input (client=0x812f748) at client.c:697 _data_stack_cur_id = 3 remove_io = <value optimized out> handled_commands = false __PRETTY_FUNCTION__ = "client_handle_input" #17 0x08064b2f in client_input (client=0x812f748) at client.c:748 cmd = <value optimized out> output = (struct ostream *) 0x813098c bytes = 27 __PRETTY_FUNCTION__ = "client_input" #18 0x080f2a10 in io_loop_handler_run (ioloop=0x8128ac8) at ioloop-epoll.c:208 ctx = <value optimized out> event = (const struct epoll_event *) 0x8128c10 list = (struct io_list *) 0x812f808 io = (struct io_file *) 0x812f7e0 tv = {tv_sec = 1789, tv_usec = 997764} t_id = 2 msecs = <value optimized out> ret = 1 i = 0 j = 0 call = <value optimized out> #19 0x080f1ad8 in io_loop_run (ioloop=0x8128ac8) at ioloop.c:338 No locals. #20 0x0806cf34 in main (argc=Cannot access memory at address 0x54a6 ) at main.c:323 buf = <value optimized out> - -- Steffen Kaiser -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) iQEVAwUBSjZLO3WSIuGy1ktrAQIiQQf+OVIEEnHua9i/f282/LLGyo48jQMQjq6b VsxUuS6pwPc6HNq16EUNfWOEA6F1/dItNLW0LbvG4bOFwtGv5HnfrzUkkf0WwZun RrVvuXCD+5vF9pMJMbilhGm4h+js+Ymu9dnl43Y64l+7t7lDMPl/JYhGgTYPFF2g 7AgNfwaRG0G4G6zQrjQr9TdefCpq9esZadQwiYMMTWTZA1krfj4QW2ITTeoKaEIL gOR6wjMWVCw6XTYYoLG9dXXJ989U3yhXEu8aXkjAZjdf6Pb/nSrrTluLDgawK65+ IlIIVD5Nx/sqsVQAZ9dK9WGNdG4i6RK/1MZH80bomJ8Ot+KrhW76oQ== =d3r4 -----END PGP SIGNATURE-----

2 6

[Dovecot] Corrupted index cache file issues (Corrupted physical size)
by Brent Bloxam 22 Jun '09

22 Jun '09

Hello, I'm running Dovecot 1.1.13 on FreeBSD 7.0-RELEASE and I'm receiving a large number of errors much like the following: dovecot: Jun 08 09:27:04 Error: IMAP(x(a)x.x): Corrupted index cache file /nfs/x.x/x/Maildir/dovecot.index.cache: Corrupted physical size for uid=2284: 5312 != 5217 dovecot: Jun 08 09:27:04 Error: IMAP(x(a)x.x): Corrupted index cache file /nfs/x.x/x/Maildir/dovecot.index.cache: Corrupted physical size for uid=2281: 6992 != 6894 dovecot: Jun 08 09:31:17 Error: IMAP(y(a)y.y): Corrupted index cache file /nfs/y.y/y/Maildir/dovecot.index.cache: Corrupted physical size for uid=9241: 14545 != 14453 dovecot: Jun 08 09:37:05 Error: IMAP(z(a)z.z): Corrupted index cache file /nfs/z.z/z/Maildir/dovecot.index.cache: Corrupted physical size for uid=22741: 12150 != 12066 These are not occurring for all users, but it occurs frequently for the addresses that do show up in the logs. The maildirs are migrated from a previous courier server. I've tried searching the archives and can't find anything related to this error. Could someone shed some light on it? Other than the error messages, I'm not aware of anything being affected, but I'd like to be sure of it Some info about the configuration: Maildirs are accessed via NFS, related settings are mmap_disable: yes mail_nfs_storage: yes mail_nfs_index: yes lock_method: dotlock Regards, Brent

3 8

[Dovecot] dovecot and ntp: Fatal: Time just moved backwards
by Arno Wald 22 Jun '09

22 Jun '09

Hallo, I am running dovecot on a PC (a workstation) to have a mail client independent storage for my mails. Now I would like to have the system clock set correctly by using ntpd or ntpdate (using debian/sid). The problem is, that the PC is not online at boot time, but is set online on demand manually using "pon" to start the pppd later. So ntpd cannot sync the time on boot time before dovecot gets started. First I was using ntpdate that was started in ppp's if.up.d/ directory. This tool does set the time very hard instead of just slightly shifting some milliseconds. So dovecot did stop itself, reporting: "Fatal: Time just moved backwards by 118 seconds. This might cause a lot of problems, so I'll just kill myself now." So I have tried ntpd as I thought it shifts the time in smaller time deltas. But this takes much time (several seconds) when booting, giving up on all configured servers, because they are not reachable when booting (as going online later manually). This turns off ntp functionality because ntpd does think that all servers are unreachable for ever. (I have tried a command "dynamic" in ntp.conf but this did not change anything and ntpd reports it to be obsolete.) My idea now is to not start ntpd on system boot, but only on if-up. But this brings up the same fatal error of dovecot as ntpd seems to hardly set the time, too. The only idea I have left is to stop dovecot, start ntpd and then start dovecot again on if-up. Is there a more elegant way to use dovecot and ntpd on a manually dialed in PC? Thanks, Arno

10 30

[Dovecot] procmail/dovecot error
by Claude Gélinas 21 Jun '09

21 Jun '09

My procmail log keep filling with the following error procmail: Program failure (75) of "/usr/libexec/dovecot/deliver" Can't open log file /var/log/dovecot.log: Permission denied ls -l /usr/libexec/dovecot/deliver -rwxr-xr-x. 1 root root 964760 avr 20 03:55 /usr/libexec/dovecot/deliver ls -l /var/log/dovecot.log -rw-------. 1 root root 34689 jun 20 15:26 /var/log/dovecot.log what do I need to check or change -- Claude Gélinas agr. Phyto Ressources inc.

3 2

[Dovecot] cross compiling (arm)
by Stephen Feyrer 21 Jun '09

21 Jun '09

Hi. I'm trying to cross compile dovecot. My desktop machine is an AMD64 box with bells and whistles. The ARM based machine is a network attached storage box. When I run "make" always get x86_64 binaries. My OS is Gentoo, so I have been able to build using emerge a variety of other programs from source. What am I doing wrong here. (Gentoo doesn't have Dovecot for the arm) I run: ./configure --prefix=/opt --target=armv5tel-softfloat-linux-gnueabi host=armv5tel-softfloat-linux-gnueabi --build=x86_64-pc-linux-gnu --cache-file=config.cache These are some values from config.cache which I think are pertinent: ac_cv_build=${ac_cv_build=x86_64-pc-linux-gnu} ac_cv_c_compiler_gnu=${ac_cv_c_compiler_gnu=yes} ac_cv_env_build_alias_set=set ac_cv_env_build_alias_value=x86_64-pc-linux-gnu ac_cv_env_host_alias_set= ac_cv_env_host_alias_value= ac_cv_env_target_alias_set=set ac_cv_env_target_alias_value=armv5tel-softfloat-linux-gnueabi acl_cv_path_LD=${acl_cv_path_LD='/usr/x86_64-pc-linux-gnu/bin/ld -m elf_x86_64'} lt_cv_path_LDCXX=${lt_cv_path_LDCXX='/usr/x86_64-pc-linux-gnu/bin/ld -m elf_x86_64'} lt_cv_sys_lib_dlsearch_path_spec=${lt_cv_sys_lib_dlsearch_path_spec='/lib /usr/lib /usr/local/lib //usr/lib32/opengl/nvidia/lib //usr/lib64/opengl/nvidia/lib /lib /usr/lib /lib64 /usr/lib64 /usr/local/lib64 /lib32 /usr/lib32 /usr/local/lib32 /usr/x86_64-pc-linux-gnu/lib /usr/lib/gcc/x86_64-pc-linux-gnu/4.3.2 /usr/lib/gcc/x86_64-pc-linux-gnu/4.3.2/32 /usr/lib/gcc/x86_64-pc-linux-gnu/4.2.3 /usr/lib/gcc/x86_64-pc-linux-gnu/4.2.3/32 /usr/lib/gcc/x86_64-pc-linux-gnu/4.1.2 /usr/lib/gcc/x86_64-pc-linux-gnu/4.1.2/32 /usr/lib64/nspr /usr/lib64/nss /usr/lib64/seamonkey /opt/blackdown-jdk-1.4.2.03/jre/lib/amd64/ /opt/blackdown-jdk-1.4.2.03/jre/lib/amd64/native_threads/ /opt/blackdown-jdk-1.4.2.03/jre/lib/amd64/classic/ /opt/blackdown-jdk-1.4.2.03/jre/lib/amd64/server/ /usr/kde/4.1/lib /usr/kde/4.1/lib64 /usr/kde/4.1/lib32 /usr/kde/4.2/lib /usr/kde/4.2/lib64 /usr/kde/4.2/lib32 /usr/lib64/qca1 /usr/lib64/qca2 /usr/lib/qt4 /usr/lib64/qt4 /usr/lib32/qt4 /usr/qt/3/lib /usr/qt/3/lib64 /usr/qt/3/lib32 /usr/games/lib /usr/games/lib64 /usr/games/lib32 /opt/flash-libcompat /usr/lib64/fltk-1.1 /usr/lib32/libstdc++-v3/ '} lt_cv_sys_lib_search_path_spec=${lt_cv_sys_lib_search_path_spec='/usr/lib/gcc/x86_64-pc-linux-gnu/4.3.2 /usr/lib64 /lib64 /usr/x86_64-pc-linux-gnu/lib'}

1 1

[Dovecot] Transfer incomming email to INBOX
by Claude Gélinas 20 Jun '09

20 Jun '09

I've installed dovecot with maildir format in /home/claude/mail. I fetch my email with fetchmail and they are placed in /var/spool/mail/claude. How can I transfer them automatically in /home/claude/mail/INBOX/new How can I setup something to transfer my email automatically as they arrive. Claude

2 1

[Dovecot] trouble to start dovecot when ldap enabled
by jean-Noël Chardron 19 Jun '09

19 Jun '09

Hello I need help on a fedora release 11 (Leonidas) when I start the dovecot process I get an error : Jun 17 10:15:24 aragon dovecot: Dovecot v1.2.rc3 starting up (core dumps disabled) Jun 17 10:15:24 aragon dovecot: Fatal: auth(default): Support not compiled in for passdb driver 'ldap' Jun 17 10:15:24 aragon dovecot: Fatal: Auth process died too early - shutting down I installed : Paquetages installés dovecot.x86_64 1:1.2-0.rc3.1.fc11 installed dovecot-ldap.x86_64 1:1.2-0.rc3.1.fc11 installed # dovecot --version 1.2.rc3 # dovecot -n # 1.2.rc3: /etc/dovecot.conf # OS: Linux 2.6.29.4-167.fc11.x86_64 x86_64 Fedora release 11 (Leonidas) ext3 login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login mail_uid: vmail mail_gid: vmail mail_location: maildir:/home/vmail/%u/ mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugins(default): autocreate mail_plugins(imap): autocreate mail_plugins(pop3): mail_plugin_dir(default): /usr/lib64/dovecot/imap mail_plugin_dir(imap): /usr/lib64/dovecot/imap mail_plugin_dir(pop3): /usr/lib64/dovecot/pop3 auth default: passdb: driver: passwd-file args: /etc/passwd passdb: driver: ldap args: /etc/dovecot-ldap.conf userdb: driver: ldap args: uid=vmail gid=vmail socket: type: listen client: path: /var/run/dovecot/auth-client mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vmail group: vmail plugin: sieve: ~/.dovecot.sieve sieve_dir: ~/sieve # cat /etc/dovecot-ldap.conf # hosts = localhost base = dc=ad,dc=dr15,dc=cnrs,dc=fr ldap_version = 3 auth_bind = yes scope = subtree # user_attrs = uid=home=/home/vmail/%L$, =gid=vmail,=uid=vmail user_filter = (&(objectclass=person)(|(mail=%u)(uid=%u))) pass_attrs = uid=user pass_filter = (&(objectclass=person)(uid=%u)) user_global_uid = dovecot user_global_gid = mail if I launch strace : #strace -f dovecot -F [...] [pid 12796] open("/usr/lib64/dovecot/auth/libauthdb_ldap.so", O_RDONLY) = 6 [...] [pid 12796] open("/usr/lib64/libldap-2.4.so.2", O_RDONLY) = 6 [...] -- Jean-Noel Chardron

7 13

[Dovecot] 1.1.16 stops authenticating users after several days
by Juergen Obermann 19 Jun '09

19 Jun '09

Hello, we use dovecot v1.1.16 on two servers with Solaris 9. This week both suddenly stopped authenticating users. The first server was startet on Jun 2 and ran until Jun 18 and the other startet on Jun 3 and failed on Jun 15. Both generated then lots of error messages, three for every user that attemps to login, looking like that: Jun 15 08:35:23 minerva dovecot-auth[20831]: [ID 401707 user.error] open_module: /usr/lib/security/pam_unix_account.so.1 failed: ld.so.1: dovecot-auth: fatal: /usr/lib/security/pam_unix_account.so.1: open failed: No such file or directory Jun 15 08:35:23 minerva dovecot-auth[20831]: [ID 487707 user.error] load_modules: can not open module /usr/lib/security/pam_unix_account.so.1 Jun 15 08:35:23 minerva dovecot: [ID 107833 local0.error] auth-worker(default): pam(gp1071,134.176.2.89): pam_acct_mgmt() failed: Dlopen failure The file /usr/lib/security/pam_unix_account.so.1 was still there and had not been changed. Until these events there have been on both servers circa 1.600.000 logins. After a restart dovecot did work again. The configuration is: # ulimit -n 8192 # /opt/local/sbin/dovecot -n # 1.1.16: /opt/local/etc/dovecot.conf # OS: SunOS 5.9 sun4u syslog_facility: local0 protocols: imap imaps pop3 pop3s ssl_cert_file: /etc/ssl/server.crt ssl_key_file: /etc/ssl/server.key disable_plaintext_auth: no version_ignore: yes login_dir: /opt/local/var/run/dovecot/login login_executable(default): /opt/local/libexec/dovecot/imap-login login_executable(imap): /opt/local/libexec/dovecot/imap-login login_executable(pop3): /opt/local/libexec/dovecot/pop3-login login_process_per_connection: no login_processes_count: 12 max_mail_processes: 4096 mail_location: mbox:~/Mail:INBOX=/var/mail/%u mmap_disable: yes mail_nfs_storage: yes mail_nfs_index: yes mail_executable(default): /opt/local/libexec/dovecot/imap mail_executable(imap): /opt/local/libexec/dovecot/imap mail_executable(pop3): /opt/local/libexec/dovecot/pop3 mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(pop3): quota mail_plugin_dir(default): /opt/local/lib/dovecot/imap mail_plugin_dir(imap): /opt/local/lib/dovecot/imap mail_plugin_dir(pop3): /opt/local/lib/dovecot/pop3 imap_client_workarounds(default): delay-newmail netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(imap): delay-newmail netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(pop3): pop3_uidl_format(default): %08Xu%08Xv pop3_uidl_format(imap): %08Xu%08Xv pop3_uidl_format(pop3): %08Xv%08Xu pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh namespace: type: private separator: / inbox: yes list: yes subscriptions: yes namespace: type: private separator: / prefix: Mail/ hidden: yes subscriptions: yes auth default: passdb: driver: pam userdb: driver: passwd plugin: quota: fs:Home-Verzeichnis Greetings, Jürgen -- Hochschulrechenzentrum der | Mail: Juergen.Obermann(a)hrz.uni-giessen.de Justus-Liebig-Universitaet | WWW: http://www.uni-giessen.de/~g033 Heinrich-Buff-Ring 44 | Tel: 0641-99-13054 (0641-99-13001) D-35392 Giessen, Germany | Fax: 0641-99-13009

2 1

Re: [Dovecot] ldap , quotes, upgrade from dovecot-1.0.14 (q2.0)
by razor razor 19 Jun '09

19 Jun '09

> On Thu, 2009-06-18 at 09:53 +0300, razor razor wrote: > > plugin { > > #########quota = maildir:storage=20240 > > quota = maildir:User quota > > quota_rule = maildir:storage=500000K >quota_rule = *:storage=500000k >> user_attrs = > > > homeDirectory=home,uidNumber=uid,gidNumber=gid,boxQuota=quote_rule=maildir:storage=%$K,status > > user_filter = (&(objectClass=posixAccount)(uid=%u)) >boxQuota=quota_rule=*:storage=%$k >> pass_attrs = > > > uid=user,,,homeDirectory=userdb_home,uidNumber=userdb_uid,gidNumber=userdb_gid,boxQuota=userdb_quota=maildir:storage=%$K,userPassword=password,status=userdb_status > > pass_filter = (&(objectClass=posixAccount)(uid=%u)) >boxQuota=userdb_quota_rule=*:storage=%$k >And remove the extra commas after uid=user. thanks for your answer! but it seems that it still doesnt take data from ldap :( now: plugin { quota_rule = *:storage=500000K } user_attrs = homeDirectory=home,uidNumber=uid,gidNumber=gid,boxQuota=quote_rule=*:storage=%$k,status pass_attrs = uid=user,homeDirectory=userdb_home,uidNumber=userdb_uid,gidNumber=userdb_gid,boxQuota=userdb_quota=maildir:stora ge=%$K,userPassword=password,status=userdb_status ================= but in log : > sudo /usr/local/etc/rc.d/dovecot start Starting dovecot. ILoading modules from directory: /usr/local/lib/dovecot/imap IModule loaded: /usr/local/lib/dovecot/imap/lib10_quota_plugin.so IModule loaded: /usr/local/lib/dovecot/imap/lib11_imap_quota_plugin.so IEffective uid=65534, gid=65534, home=/tmp Iquota: No quota setting - plugin disabled <------------ dovecot: Jun 19 10:58:56 Info: IMAP(test): Loading modules from directory: /usr/local/lib/dovecot/imap dovecot: Jun 19 10:58:56 Info: IMAP(test): Module loaded: /usr/local/lib/dovecot/imap/lib10_quota_plugin.so dovecot: Jun 19 10:58:56 Info: IMAP(test): Module loaded: /usr/local/lib/dovecot/imap/lib11_imap_quota_plugin.so dovecot: Jun 19 10:58:56 Info: IMAP(test): Effective uid=26, gid=6, home=/nonexistent dovecot: Jun 19 10:58:56 Info: IMAP(test): Quota root: name=storage=1000K backend=maildir args= <------------ dovecot: Jun 19 10:58:56 Info: IMAP(test): Quota rule: root=storage=1000K mailbox=* bytes=512000000 messages=0 <------------ dovecot: Jun 19 10:58:56 Info: IMAP(test): Namespace: type=private, prefix=, sep=, inbox=yes, hidden=no, list=yes, subscripti ons=yes dovecot: Jun 19 10:58:56 Info: IMAP(test): maildir: data=/data/vmail/data/XXXXXXXXXXXXXXXXXXXX/test/Maildir dovecot: Jun 19 10:58:56 Info: IMAP(test): maildir++: root=/data/vmail/data/XXXXXXXXXXXXXXXXXXXX/test/Maildir, index=, control=, inbox=/data/vmail/data/XXXXXXXXXXXXXXXXXXXX/test/Maildir dovecot: Jun 19 10:58:56 Info: IMAP(test): Disconnected: Logged out bytes=131/492 deliver(test): Jun 19 10:53:46 Info: Loading modules from directory: /usr/local/lib/dovecot/lda deliver(test): Jun 19 10:53:46 Info: Module loaded: /usr/local/lib/dovecot/lda/lib10_quota_plugin.so deliver(test): Jun 19 10:53:46 Info: auth input: uid=26 deliver(test): Jun 19 10:53:46 Info: auth input: gid=6 deliver(test): Jun 19 10:53:46 Info: auth input: home=/nonexistent deliver(test): Jun 19 10:53:46 Info: auth input: status=true deliver(test): Jun 19 10:53:46 Info: auth input: quote_rule=*:storage=1000k <------------ deliver(test): Jun 19 10:53:46 Info: Home dir not found: /nonexistent deliver(test): Jun 19 10:53:46 Info: quota: No quota setting - plugin disabled <------------ deliver(test): Jun 19 10:53:46 Info: Namespace: type=private, prefix=, sep=, inbox=yes, hidden=no, list=yes, subscriptions=ye s deliver(test): Jun 19 10:53:46 Info: maildir: data=/data/vmail/data/XXXXXXXXXXXXXXXXXXXX/test/Maildir deliver(test): Jun 19 10:53:46 Info: maildir++: root=/data/vmail/data/XXXXXXXXXXXXXXXXXXXX/test/Maildir, index=, control=, inbox= /data/vmail/data/XXXXXXXXXXXXXXXXXXXX/test/Maildir deliver(test): Jun 19 10:53:46 Info: msgid=<op.uvrhtvdgwnsbdb@lg54>: saved mail to INBOX and in maildirsize - 512000000S but not 1000K :( and when i login to box via squirelmail with plugin quota it show "1.6% of 488.3MB" -- Using Opera's revolutionary e-mail client: http://www.opera.com/mail/

1 0

[Dovecot] compiling dovecot-1.2-sieve-0.1.5 with the latest dovecot-1.2.rc5
by Tim Traver 19 Jun '09

19 Jun '09

Hi all, ok, downloaded dovecot-1.2.rc5 and compiled it with no problem. Then, I went to compile the latest dovecot-1.2-sieve-0.1.5 with it, and got the following error : mail-raw.c: In function 'mail_raw_init': mail-raw.c:119: error: 'NAMESPACE_FLAG_INTERNAL' undeclared (first use in this function) mail-raw.c:119: error: (Each undeclared identifier is reported only once mail-raw.c:119: error: for each function it appears in.) *** Error code 1 In looking around, I noticed in a changed log dated last month, that the NAMESPACE_FLAG_INTERNAL was moved to be two separate flags "_NOQUOTA and _NOACL"... But I think that the author of dovecot-1.2-sieve-0.1.5 hasn't made the change to handle that... So, first of all, I guess I would just like to bring it to the authors attention if it hasn't been already, and second, what is the last rc version before that change so I can actually get things to compile? Thanks, Tim.

2 2

[Dovecot] Released Sieve v0.1.6 and ManageSieve v0.11.5 for Dovecot v1.2.rc5
by Stephan Bosch 19 Jun '09

19 Jun '09

Hello Dovecot users, After more than a week on one of the Dutch islands, I finally managed to update the Sieve and Managesieve packages for the new v1.2.rc5 release. Sorry for the delay. Changelog Sieve v0.1.6: * Adjusted to changes in Dovecot to make it compile against v1.2.rc5 * Made default of sieve_dir setting match the ManageSieve implementation. - Fixed a few problems in de body extension that caused assert failures in specific situations. Changelog ManageSieve v0.11.5: * Incorporated various changes from imap-login into managesieve-login. This includes changes in the proxy support. -- The releases are available as follows: Sieve: http://www.rename-it.nl/dovecot/1.2/dovecot-1.2-sieve-0.1.6.tar.gz http://www.rename-it.nl/dovecot/1.2/dovecot-1.2-sieve-0.1.6.tar.gz.sig ManageSieve (package + patch): http://www.rename-it.nl/dovecot/1.2/dovecot-1.2-managesieve-0.11.5.tar.gz http://www.rename-it.nl/dovecot/1.2/dovecot-1.2-managesieve-0.11.5.tar.gz.s… http://www.rename-it.nl/dovecot/1.2/dovecot-1.2.rc5-managesieve-0.11.5.diff… http://www.rename-it.nl/dovecot/1.2/dovecot-1.2.rc5-managesieve-0.11.5.diff… -- Have fun testing the new releases and don't hesitate to notify me when there are problems. Regards, -- Stephan Bosch stephan(a)rename-it.nl

1 0

[Dovecot] do_vfs_lock: VFS is out of sync with lock manager!
by Frank Bonnet 18 Jun '09

18 Jun '09

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello This message appears many times in the mailhub console do_vfs_lock: VFS is out of sync with lock manager! machine run Debian etch Dovecot is 1.1.16 version onsite compiled Many users complains about deny of service Thanks -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.11 (FreeBSD) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAko6TdIACgkQ6f7UMO5oSsXMgACgjGp9hOQ2cXJv4Nho8XXl1qej TUMAoJv4PaqE8Qw+3QY6HooInPap7lEO =AxVU -----END PGP SIGNATURE-----

1 1

[Dovecot] quota.
by Mauro 18 Jun '09

18 Jun '09

Hallo. Sorry for may bad english. I'm running dovecot 1.0.15 on a debian lenny system. I've set quota plugin and, under section plugin, I've set: quota = maildir quota_rule = *:storage=50M quota_rule2 = Trash:storage=10%% quota_warning = storage=95%% /usr/local/bin/quota-warning.sh 95 quota_warning2 = storage=80%% /usr/local/bin/quota-warning.sh 80. For some accounts the quota limit works well. When I send mail I receive a rejected mail for quota exceeded. For some other accounts it doesn'work despite they have passed the 50M storage limit. Why?

4 12

[Dovecot] quota for the domain
by pj2002＠inbox.lv 18 Jun '09

18 Jun '09

Hello. Is it possible to limit quota for the whole domain? Thanks, Paul Advertisement: Saudze perkot! Latvijas Zalais punkts www.zalais.lv

2 1