- dovecot - dovecot.org

[Dovecot] Orientation and configuration help
by J Moore 29 Nov '04

29 Nov '04

This sounds to me like a "RTFM" question, but I've read the Wiki, and looked through the m.l. archives as far back as July... I still don't have a clear answer, so I'm posting here :/ I'm currently using mutt as my mail client. It runs on the same host that runs the sendmail MTA for my domain. So sendmail "delivers" my mail to /var/mail/<username>, and I read it from that location w/ mutt, transferring the "new" mail to a folder in my home directory if I want to save it (/home/<username>/Mail/<foldername>). This arrangement has been convenient, useful and reasonably secure (I think): I can check mail from anywhere via SSH, and I don't have to worry about downloading virus-laden spam/shit to my Windoze (corporate) laptop. Now, I want to change; I want to use dovecot to provide IMAP access to my mail. I'd like to do this in such a way that I can still access mail using mutt when I want/need to do so. I've installed dovecot, and reviewed /etc/dovecot.conf. I think I need to do the following to get underway: 1) create a directory for Maildir-formatted folders: mkdir /home/<username>/Maildir 2) start the dovecot daemon Is that it? Will dovecot "take over" from mutt, and put mail in my home directory? Or do I need to configure sendmail to deliver to dovecot? Also, there are other users/email accounts on the mail server that I would like to leave "as-is". Over time, I may want to migrate them to dovecot as well, but I'm reluctant to switch everything over until I've had a chance to evaluate it. Should I run dovecot as a "rootless" installation to get it for a single user, or should I just set my single UID in dovecot.conf? Thanks, Jay

2 3

[Dovecot] Which is the imap root directory? Conflicting documentation...
by Tom 29 Nov '04

29 Nov '04

So, which is the imap root directory? I am getting conflicting definitions from the documentation (copied below)... ------------------------ mbox storage requires detecting INBOX location and IMAP root directory. If MAIL environment points to file (+rw) it's treated as the INBOX file. If it points to directory (+rwx) which contains .imap/ (+rwx), inbox (+rw) or mbox (+rw) it's treated as IMAP root directory. If INBOX isn't known, imap_root/inbox file is used by default. If root directory isn't known, we try to find it from /, ~/mail or ~/Mail. Files created by Dovecot ------------------------ .subscriptions: One folder per line listing subscribed IMAP folders. There's only one of these files in the root mail directory (~/Maildir/ or ~/mail/.imap/). ---------------------------------------------------------------------------- ------ My .subscription file is located in ~/mail/ but the documentation states only one should be in ~/mail/.imap/ !!!! Thanks, OOOrah

2 1

[Dovecot] problem setting up dovecot server
by Tanim Islam 29 Nov '04

29 Nov '04

Hi all: I have a problem running my dovecot server. I get the following error message when trying to get mail from my account with INBOX in /var/spool/mail/tanim (username tanim). Nov 22 19:23:00 phobos imap(tanim): file_lock_dotlock() failed with mbox file /var/spool/mail/tanim: Permission denied What permissions should I set for the mailbox? I am running dovecot-0.99.11-1.1. Tanim -- Astronomy 109, Department of Astronomy P. O. Box 3818, University of Virginia Charlottesville, VA 22903

2 1

[Dovecot] Strace of Dovecot segfaulting.
by Chris Tooley 29 Nov '04

29 Nov '04

Please find attached the strace of dovecot, configure for use with LDAP segfaulting and throwing no error. I need to get this thing to run. It happens on startup. Chris Tooley Networking Technologies Resource Center, LLC Networking and Consulting Services Manager 8650 Spicewood Springs Rd Suite 105 Austin, TX 78759 (512)250-8985 x802 (512)659-2498 (Mobile) (512)250-5909 (Fax) www.ntrc.net

2 1

[Dovecot] Only one malfunction in months - now running dovecot-1.0-test52
by Kim Culhan 29 Nov '04

29 Nov '04

Dont think there has been even one failure in some months of use but tonight we're seeing this running test-52 While running squirrelmail 1.5.1-CVS a certain message causes: dovecot: Nov 17 22:25:14 Error: IMAP(kimc): file ostream-file.c: line 643 (_send_istream): assertion failed: (instream->v_offset <= in_size) dovecot: Nov 17 22:25:14 Error: child 72172 (imap) killed with signal 6 FWIW squirrelmail shows: ERROR : Connection dropped by imap-server. Query: FETCH 5 BODY[1] If I retrieve the message with Outlook, it shows the message has no text and a single jpeg attachment. __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

2 1

[Dovecot] SASL authentication
by Tom Allison 29 Nov '04

29 Nov '04

I was browsing the wiki and found a section on what appears to be as close to "exactly what I'm looking for" as I've seen in a long time. http://wiki.dovecot.org/moin.cgi/DovecotPostgresql However, I'm not inclined to do very much "blind" configuration on my machines without first understanding the what/why of it all. My theory is that this helps me with the RTFM syndromes later. Hopefully. My current dovecot installation is based on pgsql authentication with a single domain and files being placed in a $HOME. It's as if it were /etc/passwd based, but the passwords are different. I would very much like to migrate this into a system which supports multiple domains and this Wiki seems to be the best means for that. However, I didn't use SASL authentication. I was emotionally scarred trying to use SASL with a venture with Cyrus-IMAP under different circumstances. Could someone explain why SASL is a good thing in this case? Does it allow for something more, lead into future developements? Most of the rest of this general paper I do understand, but the SASL is the only part where I'm not sure if I must do that, want to do that, or can live without it.

2 1

[Dovecot] NFS, test52, maildir, freebsd 4.x and OS X (Panther) Server
by Sean Porter 29 Nov '04

29 Nov '04

I've been working on setting up a Dovecot server with a maildir mailboxes stored over NFS. Initially, everything was working great, and then I started seeing this error as previously discussed on the list in my maillog: (mail_index_expunge): assertion failed: (!t->view->external) Timo, in another thread, suggested to remove line 247 in mail-index-transaction.c in the test52 source, which I blithely ignored as I thought this would remove only the error message from the logfile and not fix the problem. At Mark Lidstone's helpful off-list insistence I did remove the line, recompile, and everything did seem to be working, until I encountered a different error. I started doing some light load testing from multiple clients (essentially, clicking like a rabid monkey on Get Mail in Thunderbird and hitting different mailbox links in Squirrelmail as the same user) and started running into this error in the logs: Nov 22 20:10:46 server dovecot: IMAP(mailuser(a)example.com): rename(/host/mail/mailboxes/mailuser(a)example.com/dovecot-uidlist.lock, /host/mail/mailboxes/mailuser(a)example.com/dovecot-uidlist) failed: Input/output error Nov 22 20:10:46 server dovecot: IMAP(mailuser(a)example.com): file_dotlock_replace(/host/mail/mailboxes/mailuser(a)example.com/dovecot- uidlist) failed: Input/output error Oddly, the dovecot-uidlist.lock file was unremovable on the NFS server (OS X Panther Server) with a simple 'rm', so I started digging into things a little further. It seems that the OS X NFS code is based on the FreeBSD 5.x codebase. The server that Dovecot (and my NFS client) lives on is FreeBSD 4.x, which doesn't support NFS locking at all(incidentally, the FreeBSD NFS Server is apparently incompatible with Linux NFS clients as well -- nice!). Per the suggestion in http://www.dovecot.org/doc/nfs.txt I'd already been storing my index files locally, but it appeared that the control files were somehow blowing up, even with NFS-safe dotlocking. All hope was nearly lost when I came across this tidbit in a post from Timo(http://www.dovecot.org/list/dovecot/2003-May/001489.html): - :CONTROL=dir in default_mail_env can specify where to save dovecot-uidlist and .customflags files. Useful for above problems. I then changed my dovecot.conf to retreive the mailboxes from the NFS mount, but store the indexes and the control files locally: default_mail_env = maildir:/host/mail/mailboxes/%u:INDEX=/home/dovecot/%u/indexes: CONTROL=/home/dovecot/%u/control All seems well so far. I know this is a relatively unique setup, but I thought it might help some of the other people that are running into NFS-related issues. Suggestion: perhaps the :CONTROL directive could be added to mail-storages.txt or dovecot-example.conf? A hint may also want to be added to http://www.dovecot.org/doc/nfs.txt. Sean

2 1

[Dovecot] AppleMail causes dovecot error: file mbox-rewrite.c: line 429 assertion failed
by Adam Rosi-Kessel 29 Nov '04

29 Nov '04

I get the following error message in my syslog frequently when a user accesses the dovecot (IMAP) server from his OS X AppleMail client: Nov 24 09:45:42 myhost imap(someuser): file mbox-rewrite.c: line 429 (mbox_write_header): assertion failed: (hdr_parsed_size.physical_size == hdr_size) Nov 24 09:45:42 myhost dovecot: child 23277 (imap) killed with signal 6 Usually each message appears 5-6 times. The user on the other end doesn't notice any problems. Any idea why this occurs and what I can do to prevent it? I'm using dovecot from Debian sid, 0.99.11-3. Otherwise a fairly standard configuration. -- Adam Rosi-Kessel http://adam.rosi-kessel.org

2 1

[Dovecot] Runtime root directory
by Brad Robel-Forrest 29 Nov '04

29 Nov '04

I'm considering modifying the Dovecot source to support a runtime designation for the root directory instead of relying on the prefix provided via configure. Once complete, it would be possible to move the root directory around somewhat ad-hoc after installation without having to rebuild the source. The primary driver for this is that I'd like to wrap a binary build of Dovecot within an OSX application bundle. These bundles can be placed anywhere the user desires, so Dovecot couldn't rely on a particular build-defined root directory. Before I get too far down the path, I'd like to know if there's a desire for this type of enhancement. If so, I'd like to provide a diff that would meet any other requirements for this change. There are two methods I was considering. Feel free to suggest a better alternative as I'm not ecstatic about either at the moment. 1. Find and change all uses of the prefix directory to instead prepend a value obtained from the environment (say, DOVECOT_ROOT_DIR). 2. Find and change all uses of the prefix directory to instead prepend a value obtained from the configuration file (say, a new setting called "dovecot_root_dir"). In either case, if the value was not available or not a valid directory, I would fall back to the build prefix. I would also make this functionality optional via configure--defaulted "off". -brad

2 1

[Dovecot] Dovecot 1.0-test52 and LDAP authentication
by Jonathan Salomon 26 Nov '04

26 Nov '04

Hi all! I have upgraded Dovecot 0.99.11 installation that's worked with LDAP to Dovecot 1.0-test52 and I can't get LDAP to work. I noticed the /etc/dovecot.conf is slightly different, so I have adjusted changes. If I use the standard auth (passw & pam) everything works fine, however when I user ldap for auth Dovecot starts but then dies: dovecot: Nov 26 14:14:36 Error: Auth process died too early - shutting down dovecot: Nov 26 14:14:36 Error: child 16454 (auth) killed with signal 11 As far as I can tell the /etc/dovecot-ldap.conf hasn't changed since 0.99.11 and the LDAP server is working properly. What is happening here? I did a 'strace -f dovecot 2>log' because I saw this in the mailing list archive, but it doesn't really tell me anything, so I have someone can tell me what is happening here. I have included the tail below. Thank you in advance! Jonathan [pid 16545] rt_sigaction(SIGTERM, {0x8056330, [TERM], SA_RESTART}, <unfinished ...> [pid 16546] <... sendmsg resumed> ) = -1 EPIPE (Broken pipe) [pid 16545] <... rt_sigaction resumed> {SIG_DFL}, 8) = 0 [pid 16546] --- SIGPIPE (Broken pipe) @ 0 (0) --- [pid 16545] rt_sigaction(SIGPIPE, {SIG_IGN}, <unfinished ...> [pid 16546] write(2, "\1Ffd_send(-1) failed: Broken pip"..., 34 <unfinished ...> [pid 16545] <... rt_sigaction resumed> {SIG_IGN}, 8) = 0 [pid 16546] <... write resumed> ) = -1 EPIPE (Broken pipe) [pid 16545] rt_sigaction(SIGALRM, {SIG_IGN}, <unfinished ...> [pid 16546] --- SIGPIPE (Broken pipe) @ 0 (0) --- [pid 16545] <... rt_sigaction resumed> {SIG_IGN}, 8) = 0 [pid 16546] exit_group(82) = ? Process 16546 detached [pid 16545] open(".", O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY) = 6 [pid 16545] fstat64(6, {st_mode=S_IFDIR|0750, st_size=4096, ...}) = 0 [pid 16545] fcntl64(6, F_SETFD, FD_CLOEXEC) = 0 [pid 16545] getdents64(6, /* 2 entries */, 4096) = 48 [pid 16545] getdents64(6, /* 0 entries */, 4096) = 0 [pid 16545] close(6) = 0 [pid 16545] getsockname(0, {sa_family=AF_INET, sin_port=htons(143), sin_addr=inet_addr("0.0.0.0")}, [16]) = 0 [pid 16545] getsockname(1, <unfinished ...> [pid 16547] <... select resumed> ) = 1 (in [5]) [pid 16545] <... getsockname resumed> 0xfef3d050, [28]) = -1 ENOTSOCK (Socket operation on non-socket) [pid 16547] read(5, <unfinished ...> [pid 16545] sendmsg(3, {msg_name(0)=NULL, msg_iov(1)=[{"\1\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 56}], msg_controllen=0, msg_flags=0}, 0 <unfinished ...> [pid 16547] <... read resumed> "0\f\2\1\2e\7\n", 8) = 8 [pid 16545] <... sendmsg resumed> ) = -1 EPIPE (Broken pipe) [pid 16547] read(5, <unfinished ...> [pid 16545] --- SIGPIPE (Broken pipe) @ 0 (0) --- [pid 16547] <... read resumed> "\1\0\4\0\4\0", 6) = 6 [pid 16545] write(2, "\1Ffd_send(-1) failed: Broken pip"..., 34 <unfinished ...> [pid 16547] time( <unfinished ...> [pid 16545] <... write resumed> ) = -1 EPIPE (Broken pipe) [pid 16547] <... time resumed> NULL) = 1101483703 [pid 16545] --- SIGPIPE (Broken pipe) @ 0 (0) --- [pid 16547] time( <unfinished ...> [pid 16545] exit_group(82) = ? Process 16545 detached <... time resumed> [1101483703]) = 1101483703 geteuid32() = 0 geteuid32() = 0 time(NULL) = 1101483703 write(5, "0s\2\1\3cn\4\35ou=Groups,dc=2male"..., 117) = 117 time([1101483703]) = 1101483703 select(1024, [5], [], NULL, NULL) = 1 (in [5]) read(5, "0\f\2\1\3e\7\n", 8) = 8 read(5, "\1\0\4\0\4\0", 6) = 6 time(NULL) = 1101483703 geteuid32() = 0 setgroups32(1, [97]) = 0 open("/etc/localtime", O_RDONLY) = 6 fstat64(6, {st_mode=S_IFREG|0644, st_size=1074, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xf6f0f000 read(6, "TZif\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\r\0\0\0\r\0"..., 4096) = 1074 close(6) = 0 munmap(0xf6f0f000, 4096) = 0 chroot("/var/run/dovecot/login") = 0 chdir("/") = 0 setuid32(97) = 0 setuid32(0) = -1 EPERM (Operation not permitted) getgid32() = 97 getegid32() = 97 setgid32(0) = -1 EPERM (Operation not permitted) setrlimit(RLIMIT_NPROC, {rlim_cur=1, rlim_max=1}) = 0 gettimeofday({1101483703, 638988}, {4294967236, 0}) = 0 rt_sigaction(SIGHUP, {0x8056320, [], 0}, NULL, 8) = 0 rt_sigaction(SIGINT, {0x8056330, [INT], SA_RESTART}, {SIG_DFL}, 8) = 0 rt_sigaction(SIGTERM, {0x8056330, [TERM], SA_RESTART}, {SIG_DFL}, 8) = 0 rt_sigaction(SIGPIPE, {SIG_IGN}, {SIG_IGN}, 8) = 0 rt_sigaction(SIGALRM, {SIG_IGN}, {SIG_IGN}, 8) = 0 open(".", O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY) = 6 fstat64(6, {st_mode=S_IFDIR|0750, st_size=4096, ...}) = 0 fcntl64(6, F_SETFD, FD_CLOEXEC) = 0 getdents64(6, /* 2 entries */, 4096) = 48 getdents64(6, /* 0 entries */, 4096) = 0 close(6) = 0 getsockname(0, {sa_family=AF_INET, sin_port=htons(143), sin_addr=inet_addr("0.0.0.0")}, [16]) = 0 getsockname(1, 0xfef8b470, [28]) = -1 ENOTSOCK (Socket operation on non-socket) sendmsg(3, {msg_name(0)=NULL, msg_iov(1)=[{"\1\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 56}], msg_controllen=0, msg_flags=0}, 0) = -1 EPIPE (Broken pipe) --- SIGPIPE (Broken pipe) @ 0 (0) --- write(2, "\1Ffd_send(-1) failed: Broken pip"..., 34) = -1 EPIPE (Broken pipe) --- SIGPIPE (Broken pipe) @ 0 (0) --- exit_group(82) = ? Process 16547 detached

1 0

[Dovecot] [OT] Apple Mail.app access to localhost imap when no network
by Alan Schmitt 25 Nov '04

25 Nov '04

Hello, Sorry for the offtopic subject, but I tried asking this on some Apple mailing lists and could not find an answer there, and as it's related to imap (provided by dovecot), someone might know something about this. The problem is the following: I have a local IMAP server provided by dovecot, so that I can store my mail in maildir format, and read it both using mutt and Apple Mail.app. Mail.app is configured to access localhost:143 to access mail. However, I discovered that when there is no network connection (no ethernet cable plugged in and no wifi network), Mail.app is saying that it's working in disconnected mode and refuses to access the imap server. Would someone have a suggestion as to what to do to allow connected access to localhost when no network is present? I'm very new to OS X (I come from Linux). Thanks a lot, Alan Schmitt

6 12

Re: [Dovecot] dovecot only answers to imap connections
by Mitch Pirtle 25 Nov '04

25 Nov '04

Nope, just sticking with simple pop3 at this point ;-) The second issue I am having is that Thunderbird seems to 'freeze' from time to time on directories that have more than 1000 messages in them. I remember reading earlier that there were some performance tweaks for Thunderbird, but I lost the link :-( I cannot replicate the authentication problem, and will wait to see if it is a layer 8 protocol error (between the ears). Thanks for the help, you have been stupendous! -- Mitch On Wed, 24 Nov 2004 19:01:29 -0700, Saurabh Barve <sa(a)atmos.colostate.edu> wrote: > Are you using simple POP3 or secure POP3? If you are using secure POP3, > then you have to tell the clients that they need to accept your > certificate permanently, not just for that session. Otherwise, the mail > clients will complain about self-signed certificates every time they > log in.

1 0

[Dovecot] Cannot see contents of ~/mail folder
by Saurabh Barve 25 Nov '04

25 Nov '04

Hi, I just installed dovecot-0.99 on my Fedora Core 2 machine. When I start the secure IMAP daemon, I am able to see my Inbox, but not the other folders in the 'mail' folder in my home directory (sent-mail, saved-messages, etc.) These folders were created when I was using pine earlier on the machine. In my dovecot.conf file, I have set: default_mail_env = mbox:~/mail:INBOX=/var/mail/%u I am using Mozilla Mail as my mail client, if that makes a difference. Dovecot seems to be creating a directory called .imap inside the 'mail' folder, where it is storing the inbox and a Trash folder. I have set "mail_full_filesystem_access = no" so that users don't access any of their other files except the mail folder. From what I understand, I don't have to set IMAP path in Mozilla Mail. I tried doing that too, just to try it out, but as expected, it didn't work. What do I need to set in order to see my other folders in the 'mail' directory? Thanks, Saurabh. ------------------------------------------------------------------------ --------------------------- Saurabh Barve Phone : (970) 491-7714 E-mail : sa(a)atmos.colostate.edu System Administrator, Montgomery Research Group, Deptt of Atmos. Sci., CSU, Fort Collins, CO - 80523

4 6

[Dovecot] ssl_ca_file
by Jacob Elder 25 Nov '04

25 Nov '04

I am very fond of Dovecot, but it would be nice to have a more useful SSL implementation. When do you think we'll see a non-beta version that supports ssl_ca_file? I am running 0.99.11-3 from Debian testing. -- Jacob Elder

1 0

[Dovecot] Error in IMAP command GETACL: Unknown command..
by Ingo Lantschner (Lists) 24 Nov '04

24 Nov '04

Hi all, I have just installed dovecot on my Fedora Core 2 box. I would like to use it only for reading archived email from within my Mozilla 1.7.3. I syminked my old opera-files (*.mbs whoch seems to be same as mbox) into ~/mail. Seems to work fine, mostly I can open the mailfiles - sometimes it hangs with the following error: The current command did not succeed. The mailserver responded: Error in IMAP command GETACL: Unknown command.. And then: The current command did not succeed. The mailserver responded: Error in IMAP command MYRIGHTS: Unknown command.. ALthough I searched in Google and in the Wiki on dovecot, I did not find any hint - am I the first with this problem? TIA Ingo. -- Ingo Lantschner T (+43-1) 59 55 766 M (+43-664) 143 84 18 -- Ingo Lantschner T (+43-1) 59 55 766 M (+43-664) 143 84 18

2 1

Re: [Dovecot] [OT] Apple Mail.app access to localhost imap when no network
by Alan Schmitt 22 Nov '04

22 Nov '04

Le 22 nov. 04, à 14:30, Simon Waters a écrit : >> I tried that, and it did not work. I guess Mail.app must be trying to >> resolve some name (that is not localhost), and failing somehow. > > Stupid question, but does "localhost" resolve. Most systems it must > appear in > /etc/hosts for it to resolve. You can always specify 127.0.0.1 as the > server > to rule out name resolution. Thanks for this suggestion. "localhost" does resolve (I tried to ping it, and it worked), and 127.0.0.1 does not change anything. So I guess my initial guess was wrong, and Mail must be trying to see if the network is up before even trying to log in. Alan Schmitt

1 0

[Dovecot] .INBOX required?
by Todd Slater 20 Nov '04

20 Nov '04

Hi, Newbie to Dovecot and IMAP in general. The system in question is RH 9, Dovecot 0.99.11, Maildir, accessing mail with SquirrelMail, Thunderbird, Kmail, Mutt, Entourage and Mail.app. I've set up the maildir for users in ~/Maildir. Inside that I have other folders, .Sent, .Drafts, .Trash, .Junk, .MakeJunk, .MakeGood. ~/Maildir itself has the cur, new, and tmp folders, but I note that there is also an .INBOX folder. Mail to the account does end up in ~/Maildir/new and it's readable in the various MUA's (as Inbox). I'm just not certain why the .INBOX is there, and if I'm supposed to be creating the other folders as .INBOX.otherfolder. Thanks, Todd

3 3

[Dovecot] [PATCH] add initial response support for NTLM and RPA
by Andrey Panin 19 Nov '04

19 Nov '04

Hello, this patch adds initial response support for NTLM and RPA authentication mechanism. It can be useful if dovecot acts as authentication backend for SMTP server. RFC2554 permits initial response in AUTH command, so it's legal to send NTLM type 1 message or RPA token 1 in it. Please consider applying. Best regards. -- Andrey Panin | Linux and UNIX system administrator pazke(a)donpac.ru | PGP key: wwwkeys.pgp.net

1 0

[Dovecot] assertion failed: (!t->view->external)
by Peter Hessler 19 Nov '04

19 Nov '04

Nov 18 17:29:54 gir dovecot: imap-login: Login: jmcvetta [69.106.50.255] Nov 18 17:30:02 gir dovecot: IMAP(jmcvetta): file mail-index-transaction.c: line 247 (mail_index_expunge): assertion failed: (!t->view->external) Nov 18 17:30:02 gir dovecot: child 31094 (imap) killed with signal 6 I saw this in my maillog. I have no idea what that user is doing, but I can harrass him and find out if need be. I'm using 1.0-test52 on OpenBSD/macppc. -- There are three ways to get something done: (1) Do it yourself. (2) Hire someone to do it for you. (3) Forbid your kids to do it.

2 2

[Dovecot] [Fwd: Re: [Evolution] evo confused when searching message bodies on large folders?]
by Dan Stromberg 19 Nov '04

19 Nov '04

Is this possibly a problem with dovecot 0.99.10.9? Maybe it's been fixed in a later release? Might it be a security issue? Thanks!

2 1

[Dovecot] (mail_index_expunge): assertion failed: (!t->view->external)
by Mark Lidstone 18 Nov '04

18 Nov '04

Hi all, I was wondering if anyone's seen anything like this? Nov 15 14:16:13 olympic dovecot: imap-login: Login: postmaster [192.168.0.32] Nov 15 14:17:05 olympic dovecot: IMAP(postmaster): file mail-index-transaction.c: line 247 (mail_index_expunge): assertion failed: (!t->view->external) Nov 15 14:17:05 olympic dovecot: child 20184 (imap) killed with signal 6 Nov 15 14:17:19 olympic dovecot: Killed with signal 15 Nov 15 14:17:19 olympic dovecot: Dovecot v1.0-test52 starting up I'm running (as you might have guessed) test52 on Linux (i386) using maildirs. The client is Thunderbird. This only appears to be happening when viewing certain mail folders in the IMAP account. As a temporary fix, it seems to stop happening when I delete the ".imap*" files in the affected folder, but this is hardly an ideal solution. If you want any debug-type information please send me "idiots guide" type instructions as to how to do it - I'm not a software engineer :? Many thanks, Mark Lidstone IT and Network Support Administrator BMT SeaTech Ltd Grove House, Meridians Cross, 7 Ocean Way Ocean Village, Southampton. SO14 3TJ. UK Tel: +44 (0)23 8063 5122 Fax: +44 (0)23 8063 5144 E-Mail: mailto:mark.lidstone@bmtseatech.co.uk Website: www.bmtseatech.co.uk ======================================================================== == Confidentiality Notice and Disclaimer: The contents of this e-mail and any attachments are intended only for the use of the e-mail addressee(s) shown. If you are not that person, or one of those persons, you are not allowed to take any action based upon it or to copy it, forward, distribute or disclose the contents of it and you should please delete it from your system. BMT SeaTech Limited does not accept liability for any errors or omissions in the context of this e-mail or its attachments which arise as a result of Internet transmission, nor accept liability for statements which are those of the author and not clearly made on behalf of BMT SeaTech Limited. ======================================================================== ==

5 6

[Dovecot] Rebuilind help
by Clinton Mills 18 Nov '04

18 Nov '04

Okay see if you can see what I am doing wrong? Looking at the timestamp [root@ns3 sbin]# ls -la /usr/local/sbin/dovecot -rwxr-xr-x 1 root root 471186 Nov 13 18:25 /usr/local/sbin/dovecot rebuilding [root@ns3 sbin]# /root/dovecot-0.99.11/configure --sysconfdir=/etc --localstatedir=/var ...... [root@ns3 sbin]# make ...... [root@ns3 sbin]# sudo make install .... Looking at the timestamp [root@ns3 sbin]# ls -la /usr/local/sbin/dovecot -rwxr-xr-x 1 root root 471186 Nov 17 13:35 /usr/local/sbin/dovecot The file was updated! [root@ns3 dovecot-0.99.11]# /usr/local/sbin/dovecot Fatal: Can't open configuration file /usr/local/etc/dovecot.conf: No such file or directory Any ideas on why it is looking in /usr/local? Thanks Clinton Hitcents.com Tel: (270) 796-5063 ext 105# Fax: (270) 796-3195 Cell: (270) 996-1122

2 1

[Dovecot] Dovecot LDAP, SQL auth process memory leaks fixed
by Timo Sirainen 17 Nov '04

17 Nov '04

Pretty simple bug, fixed finally. For 0.99.x: http://dovecot.org/patches/sql-ldap-auth-leak.diff Next 1.0-test release (or next nightly snapshot) fixes it for 1.0-tests.

2 1

[Dovecot] noob - Outlook Duplicate Problem Question
by Jeff Ramsey 17 Nov '04

17 Nov '04

Hi, I use dovecot 0.99-11 with sendmail latest, and clamav-milter, and spamass-milter. Whole setup works great. We only use dovecot for pop3, no imap. We use primarily Outlook 2000-2003 for a client. I have a couple of users who prefer to leave a copy of each message on the server. I read the archives about the Outlook Duplicate Message problem regarding the setting 'Leave a copy on the Server'. I read that someone fixed this by changing the order of the UIDL from datestamp.message# to message#.datestamp. My question is if I make that change in my source for 0.99-11, will the 1.0 version have a fix for this included, or should I look for another pop3 server? I'd like to continue to use dovecot as it is very light and fast, but I'm trying to eliminate using source compiled binaries on my production servers, and letting YUM do my updates for me. I can compile this version from source, using the fix that was mentioned in the September Archives for this list, if I know that the problem (which is an MS problem, go figure) will be gone in future RPM binary packages. Thanks for any info or help. Jeff Ramsey MIS Administrator Tubafor Mill, Inc.

6 7

[Dovecot] 1.0-test52
by Timo Sirainen 16 Nov '04

16 Nov '04

http://dovecot.org/test/ I have very high hopes that mbox support is finally stable in this version. I've been running some stress tests for an hour now without it breaking (well, there are two potential problems but I think they were just fixing previous breakages). Before it took only a few minutes at most to break. - fixes several mbox syncing problems, especially expunges potentially deleted parts of wrong messages - maildir: readdir() race conditions are fixed by keeping dovecot-uidlist lock a bit more than before (it really doesn't matter in most cases, we did this before as well but slightly less often. so this really fixes just the problematic cases without giving hardly any more overhead than there was before) - index header changed a bit. will rebuild indexes and print some cache indexid errors.. i should hide these errors too.. - fixed memory leaks in dovecot-auth

2 5

[Dovecot] dovecot and outlook express and large messages
by Daniel 16 Nov '04

16 Nov '04

Hi I have been using Dovecot 0.99.11 and 1.0-test52 on a server with about 2000 accounts. All has been working good until a few days ago. Now I'm stuck and can't work out whats going on. The problem seems to be only with Outlook/outlook express clients. If the mail is large with an attachment its fails. After you hit the send and receive button after a while Outlook express gives the error "Your POP3 server has not responded in 60 seconds". Network activity seem to be minimal between the client and the server. There is no log entry out of the ordinary to say what went wrong. I have tried out a number of changes to the dovecot.conf file, none make any difference. Thanks for any help. Regards Daniel Rowe

2 1

[Dovecot] eudora issue
by kent crispin 16 Nov '04

16 Nov '04

There seems to be a protocol mismatch between eudora and dovecot when using pop. The login interchange with, for example, mozilla, is as follows: MO: [connects] DC: +OK dovecot ready. MO: CAPA DC: +OK DC: CAPA DC: TOP DC: USER DC: UIDL DC: RESP-CODES DC: STLS DC: SASL PLAIN DC: . MO: USER yyy DC: +OK MO: PASS xxxxxxxx DC: +OK Logged in. But with eudora, with apparently equivalent configuration, the sequence is as follows: EU: [connects] DC: +OK dovecot ready. EU: CAPA DC: +OK DC: CAPA DC: TOP DC: USER DC: UIDL DC: RESP-CODES DC: STLS DC: SASL PLAIN DC: . EU: auth PLAIN AG1tcgBtaXN0bGV0b2U= DC: -ERR Unsupported authentication mechanism. At this point eudora reports an error back to the user, and the connection fails. Can anyone shed any light on this? Is it just that there is an incompatibility in how eudora and dovecot view the protocol? Or is there some configuration option I need to tweak to make things work? Thanks for any help. Kent -- Kent Crispin kent(a)songbird.com SIP: 81202(a)fwd.pulver.com

3 2

[Dovecot] (mail_index_expunge): assertion failed: (!t->view->external) Is this a bug?
by Daniel 16 Nov '04

16 Nov '04

Hi I am getting this a lot. Is this a bug? (mail_index_expunge): assertion failed: (!t->view->external) can be fixed by deleting the /home/<user>/mail/.imap directory. It has happened a few times with me. Regards Daniel Rowe

1 0

[Dovecot] (mail_index_expunge): assertion failed: (!t->view->external)
by Daniel 16 Nov '04

16 Nov '04

Hi (mail_index_expunge): assertion failed: (!t->view->external) can be fixed by deleting the /home/<user>/mail/.imap directory. It has happened a few times with me. Regards Daniel Rowe

1 0

[Dovecot] RE: dovecot and outlook express and large messages
by Daniel 16 Nov '04

16 Nov '04

Hi Dose dovecot have problem working on a eth0:1 alias type interfaces? I just wondering if this could be my problem? Dovecot would do the authentication correctly and send small email but as soon as any load was put on it like downloading a mail with a large attachment it would fail. All network traffic would stop. No errors in the logs. As soon as I move the service to listen on a non alias interface eth0 all works fine. Very strange. I have taken a good look at our server to check that is not anything. I'm pretty sure we are good. I have also rebooted the box to see if that would fixed it which it didn't. Regards Daniel

3 2

[Dovecot] dovecot with different POP3S / IMAPS Certs
by Vincent Jaussaud 15 Nov '04

15 Nov '04

Hi, I'm new to dovecot, but actually planning to switch a wide WU-IMAP/POP installation to dovecot. With WU-IMAP, a different certificate can be used by pop3s and imaps, allowing both server to be reachable through different hostnames,without SSL complaints on the client side; this is mostly used for scalability. I'm trying to do the same thing with dovecot; that is having dovecot using a different certificate for it's pop3s instance and imaps instance. Unfortunately, in dovecot configuration file, only one certificate can be set; used by both pop3s / imaps. Any idea of the best way to handle this ? Thanks ! Vincent. -- Vincent Jaussaud Kelkoo.com Security Manager email: tatooin(a)kelkoo.com GPG key: 1024D/3BFE3FC7 2002-02-07 "Those who desire to give up freedom in order to gain security will not have, nor do they deserve, either one." -- President Thomas Jefferson. 1743-1826

2 2

[Dovecot] dovecot-auth leaves zombies
by Stefano Maffulli 15 Nov '04

15 Nov '04

Hi all, I have installed and configured dovecot on two different machines, so I don't have much experience with this server. One installation is giving me serious problems, that I have a hard time tracing. From the beginning: the machine is a debian mix (stable/unstable) dovecot 0.9.11, real users authenticated via pam_ldap/nss_ldap. It serves ~70 users, all of them using Outlook, Outlook Express and IMP. The system seems to work just fine for a while, but after a some time, some dovecot-auth zombies start appearing. I can't really understand who/what is causing them. The only thing I see in the logs are these lines, very sporadically, but I still couldn't trace when they happened. Nov 5 09:40:28 csv-mail-01 dovecot-auth: nss_ldap: reconnecting to LDAP server... Nov 5 09:40:28 csv-mail-01 dovecot-auth: nss_ldap: reconnected to LDAP server after 1 attempt(s) (BTW, also apache2 sends similar messages, I don't know if they are related) Nov 5 09:52:14 csv-mail-01 apache2: nss_ldap: reconnecting to LDAP server... Nov 5 09:52:14 csv-mail-01 apache2: nss_ldap: reconnected to LDAP server after 1 attempt(s) After a while dovecot stops authenticating and needs to be killed and restarted (/etc/init.d/dovecot stop takes some time to actually stop dovecot processes). Do you have any clue of what is going on and where I can investigate further? I would like to say 'it's Outlook's fault', but I really can't. Any hint appreciated. regards stef

2 5

RE: [Dovecot] Fatal: chdir(homedir) failed: Permission denied
by Καράμπης Παναγιώτης 15 Nov '04

15 Nov '04

matthias thnx a lot for your hint. We are 2 admins on this box and this makes things complicated. /home 's permissions where 705 and that's the reason for this. Solved thank u again mate:) ________________________________ Από: Matthias Andree [mailto:matthias.andree@gmx.de] Αποστολή: Κυρ 14/11/2004 1:52 πμ Προς: Καράμπης Παναγιώτης Κοιν.: dovecot(a)dovecot.org Θέμα: Re: [Dovecot] Fatal: chdir(homedir) failed: Permission denied Καράμπης Παναγιώτης <epp719(a)epp.teicrete.gr> writes: > hello all i run dovecot as my imap server on my university and squirrel as webmail. But squirrel returns an error: > ERROR : Connection dropped by imap-server > CAPABILITY > > i tail my /var/log/dovecot and this is the output with whatever user i try to log in and view mails: > > dovecot: Nov 13 17:51:27 Fatal: chdir(/home/epp719) failed with uid 2975: Permission denied > dovecot: Nov 13 17:51:27 Error: child 17554 (imap) returned error 89 > ---------------------------------------------------------------------- > i give the: > root@(host edited):/root# ls -lad /home/epp719 Panagiotis, if the user epp719 and dovecot are in a common group, that may be the cause why it isn't working. > drwx---r-x 4 epp719 users 368 2004-11-13 17:49 /home/epp719 > and directory exists i tried also changing permissions on dir but same things happen. > both .qmail and Maildir exist in the home directory. What are the permissions of the / and /home directories? ls -lad /home -- can dovecot execute the / and /home directories? If these are drwx------ or similar, that might be the problem. Hope that helps. -- Matthias Andree

1 0

[Dovecot] Fatal: chdir(homedir) failed: Permission denied
by Καράμπης Παναγιώτης 14 Nov '04

14 Nov '04

hello all i run dovecot as my imap server on my university and squirrel as webmail. But squirrel returns an error: ERROR : Connection dropped by imap-server CAPABILITY i tail my /var/log/dovecot and this is the output with whatever user i try to log in and view mails: dovecot: Nov 13 17:51:27 Fatal: chdir(/home/epp719) failed with uid 2975: Permission denied dovecot: Nov 13 17:51:27 Error: child 17554 (imap) returned error 89 ---------------------------------------------------------------------- i give the: root@(host edited):/root# ls -lad /home/epp719 drwx---r-x 4 epp719 users 368 2004-11-13 17:49 /home/epp719 and directory exists i tried also changing permissions on dir but same things happen. both .qmail and Maildir exist in the home directory. I attach the dovecot.conf file... any help is appreciated! PS: Sorry about my english its not my native language.. oh i forgot squirrel gets data and attachments from mysql...

2 1

[Dovecot] make error
by Ken Woodward (IS) 12 Nov '04

12 Nov '04

Dear DINH and TIMO, Here are the last lines before the fatal error. It says that "set fnord ; amf=$2; \ " is the command that caused the error. Does this make any sense to you? "if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" make: Fatal error: Command failed for target `all-recursive' Current working directory /r/downloads/dovecot-0.99.11/src *** Error code 1 The following command caused the error: set fnord ; amf=$2; \ dot_seen=no; \ target=`echo all-recursive | sed s/-recursive//`; \ list='src doc'; for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (cd $subdir && make $local_target) \ || case "$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" make: Fatal error: Command failed for target `all-recursive' Current working directory /r/downloads/dovecot-0.99.11 *** Error code 1 make: Fatal error: Command failed for target `all-recursive-am' /r/downloads/dovecot-0.99.11>"\ ============================================================================ ============================= I can include my complete config.log which does complete with no indication of failure reported at the end, BUT, inside it does list fatal errors like: "configure:2802: gcc -o conftest -g -O2 conftest.c -lcposix >&5 ld: fatal: library -lcposix: not found ld: fatal: File processing errors. No output written to conftest" AND "Undefined first referenced symbol in file socket /var/tmp//ccsUoghx.o ld: fatal: Symbol referencing errors. No output written to conftest collect2: ld returned 1 exit status configure:21217: $? = 1 configure: failed program was: | /* confdefs.h. */ " AND "Undefined first referenced symbol in file inet_addr /var/tmp//cceuY9Eo.o (symbol belongs to implicit dependency /usr/lib/libnsl.so.1) ld: fatal: Symbol referencing errors. No output written to conftest collect2: ld returned 1 exit status configure:21383: $? = 1 configure: failed program was: | /* confdefs.h. */ " ============================================================================ ================================= Thanks for your help. P.S. Was I supposed to send a new message to dovecot at dovecot dot org like this or reply to your message?

1 0

[Dovecot] make error
by Ken Woodward (IS) 12 Nov '04

12 Nov '04

Can anyone help with this? I get the following error when running "make". "configure" worked fine. I am installing the latest dovecot on a Solaris OS10 machine make: Fatal error: Command failed for target `all-recursive' **** Error code 1 Also could someone tell me if it is possible to search all the archives through the complete message bodies or are we limited to searching each month individually and only on the message subject? Thanks for any help, Sincerely, Ken

3 2

[Dovecot] pem help
by Clinton Mills 12 Nov '04

12 Nov '04

When I run this: /usr/local/sbin/dovecot -c /etc/dovecot.conf I get this Fatal: Can't use SSL certificate /etc/ssl/certs/dovecot.pem: No such file or directory But in my conf file these are commented out?? #ssl_cert_file = /usr/share/ssl/certs/dovecot.pem #ssl_key_file = /usr/share/ssl/private/dovecot.pem Why would I get this error? Thanks Clinton Mills

2 1

[Dovecot] pop3d keeps downloading messages over and over again
by Gordon Thagard 12 Nov '04

12 Nov '04

Solaris 9 SunOS 5.9 Generic_117171-11 sun4u sparc SUNW,Ultra-250 gcc version 3.3.2 dovecot-0.99.11 compile options: LDFLAGS=-L/usr/local/ssl/lib CPPFLAGS=-I/usr/local/ssl/include/openssl ./configure --prefix=/opt/dovecot --disable-ipv6 --with-file-offset-size=32 --with-mem-align=4 --with-rawlog --with-ssl=openssl OK, this applies whether or not a user account is set to leave mail on the server or not. There are several things that might happen, depending on who knows what: 1. Mail pops fine. 2. The "DO NOT DELETE THIS EMAIL" keeps downloading over and over again. 3. All emails since the switch to this new test dovecot pop3d will be downloaded over and over again. Any help would be greatly appreciated. Thank you, Gordon Thagard

2 2

[Dovecot] duplicate woes
by Jeff Ramsey 12 Nov '04

12 Nov '04

Hi, I have FC2/Sendmail/Dovecot default setup. I turned on POP3 and POP3S in /etc/dovecot.conf. I started out getting duplicates only when I was using Outlook w/ 'Leave copy on server' option. Lately, I've been getting duplicates at seemingly random messages sent to and from seemingly random users. Any help will be appreciated. Thanks, Jeff Ramsey Tubafor Mill, Inc.

2 1

[Dovecot] Popping without home directories
by Andre Grove 12 Nov '04

12 Nov '04

Hello there I tend to e-mail user accounts to my servers with /sbin/nologin and /dev/null as their shell and home directories respectively. I have discovered that Dovcot does not like it when a user does not have a home directory. Obviosly the user POP3 and not IMAP! :P Is there a work around for this? I have a suspicion it is one of the chroot option, but I do not know the meaning chroot. Thanks Andre

2 1

[Dovecot] Possible Bug
by Chris L. Franklin 12 Nov '04

12 Nov '04

Okay in dovecot.conf I set the fallowing settings log_path = /var/log/dovecot info_log_path = /var/log/dovecot Then I setup log rotation for that file (using logrotate). But after it does the rotation. Dovecot dies. Now I know why this happens. But should it ? To over come this I now have it set to stop dovecot and start dovecot after it's done dealing with the log file. -- Chris L. Franklin --

2 1

[Dovecot] bug with LIST IMAP command
by DINH Viet Hoa 12 Nov '04

12 Nov '04

I am in mbox configuration, and I am getting INBOX listed 3 times. I suppose the first is /var/mail/login and the others are $HOME/Mail but they appear twice. However, it seems this is a bug. << $ telnet localhost 143 Trying 127.0.0.1... Connected to utopia.priv. Escape character is '^]'. * OK dovecot ready. 01 LOGIN login password 01 OK Logged in. 02 LIST "" "*" * LIST (\NoInferiors) "/" INBOX * LIST (\Noselect \HasChildren) "/" "queue" * LIST (\Noselect \HasChildren) "/" INBOX * LIST (\Noselect \HasChildren) "/" INBOX * LIST (\NoInferiors \UnMarked) "/" "INBOX/pingouin" * LIST (\Noselect \HasChildren) "/" "sent" * LIST (\NoInferiors) "/" "sent/1" 02 OK List completed. 02 LOGOUT * BYE Logging out 02 OK Logout completed. Connection closed by foreign host. >> -- DINH V. Hoa, "c'est stressant comme taf" -- coin

1 0

[Dovecot] [PATCH] NTLM update and crashfix
by Andrey Panin 10 Nov '04

10 Nov '04

Hello, attached patch allows LM authentication for older (Win9x) clients which do not pass NTLM response in type 3 message. It also fixes crash in dovecot-auth (empty credentials could be passed to hex_to_binary function if NTLM2 was negotiated). Please consider applying. Best regards. -- Andrey Panin | Linux and UNIX system administrator pazke(a)donpac.ru | PGP key: wwwkeys.pgp.net

1 0

[Dovecot] noob - integrating dovecot with postfix
by Mitch Pirtle 09 Nov '04

09 Nov '04

Hi list, Just jumped providers and am now desperately trying to get IMAP running on a new server... But not getting the link between postfix and dovecot working. :-( My two problems are: 1) local mail seems to get into the ~/Maildirs, but not from the outside (this is a postfix issue?) 2) I cannot find information on how to tell postfix to use virtual domains/addresses and then connect dovecot to them (as they are now in non-standard locations and/or formats) I'm sure this is a FAQ, but cannot find an example that would walk me though this. Can someone kindly point me in the right direction? -- Mitch

2 1

[Dovecot] Excessive imap-login and pop3-login processes
by Ben Beuchler 08 Nov '04

08 Nov '04

I'm running a Linux mail server with Postfix and Dovecot. I've noticed that the number of "imap-login" processes usually sits around 240, and "pop3-login" usually around 50 or so. The comments in the config file seem to indicate that, with my setup, I shouldn't see more than about 10 of each. Am I misunderstanding the config or is this expected behavior? login_process_per_connection = no login_processes_count = 10 login_max_processes_count = 128 login_max_logging_users = 256 The mail server receives about 1.5 - 3 logins per second and usually has around 75 simultaneous IMAP sessions. There are rarely more than 1 or 2 simultaneous POP3 sessions open. Thanks... -Ben -- Ben Beuchler There is no spoon. insyte(a)emt-p.org -- The Matrix

1 0

[Dovecot] dovecot 1.0-test52 build notes
by Mark E. Mallett 08 Nov '04

08 Nov '04

I thought I would try to use 'configure' to lay out the dovecot install a little differently than the default. I prefer all the support files under one tree (e.g. in /usr/local/lib/dovecot-1.0) rather than distributed around the filesystem. And I'd be happiest if all of the support files were just at that top level rather than in subdirectories. e.g.: /usr/local/lib/dovecot-1.0/dovecot.conf /usr/local/lib/dovecot-1.0/imap-login /usr/local/lib/dovecot-1.0/dovecot-auth etc. (I'm happy to have a "doc" subdirectory though.) And ideally I'd have the primary executable installed in a more generic place, but tagged with its version number, like /usr/local/sbin/dovecot-1.0 Note that I'm not suggesting this, just explaining what I am after. So the second to last thing I tried was: --program-suffix=-1.0 \ --bindir=/usr/local/lib/dovecot-1.0 \ --sbindir=/usr/local/lib/dovecot-1.0 \ --libexecdir=/usr/local/lib/dovecot-1.0 \ --sysconfdir=/usr/local/lib/dovecot-1.0 \ --datadir=/usr/local/lib/dovecot-1.0 \ --localstatedir=/usr/local/lib/dovecot-1.0 \ But that didn't really work, for the reasons listed in the "last" try below, plus all of the executables got the "-1.0" suffix, not just the "dovecot" program (not a big surprise..). And the last thing I tried: --bindir=/usr/local/lib/dovecot-1.0 \ --sbindir=/usr/local/lib/dovecot-1.0 \ --libexecdir=/usr/local/lib/dovecot-1.0 \ --sysconfdir=/usr/local/lib/dovecot-1.0 \ --datadir=/usr/local/lib/dovecot-1.0 \ --localstatedir=/usr/local/lib/dovecot-1.0 \ which kinda got me where I wanted, except that if I want a dovecot-1.0 executable in /usr/local/sbin I need to add that by hand, and also that the build process added another subdirectory "dovecot": /usr/local/lib/dovecot-1.0/dovecot/ I can (and did) manually remove that final directory and flatten out the tree, and fortunately you've made it possible to specify in dovecot.conf the paths to all the executables and so forth. But it would be nice to be able to create this desired layout entirely via configure and not have to move things around after the fact. Is that even possible? Obviously, don't spend a lot of time on it.. but if I'm missing an option that would get me where I want, I'd be interested in knowing about it. Oh, and "strings src/master/dovecot | grep /usr/local" gives this: /usr/local/lib/dovecot-1.0/dovecot.conf /usr/local/lib/dovecot/imap /usr/local/lib/dovecot-1.0/dovecot/imap /usr/local/lib/dovecot-1.0/run/dovecot /usr/local/lib/dovecot-1.0/dovecot/dovecot-auth /usr/local/lib/dovecot-1.0/dovecot/imap-login /usr/local/lib/dovecot-1.0/dovecot/pop3-login /usr/local/lib/dovecot-1.0/dovecot/pop3 /usr/local/lib/dovecot/pop3 So it looks like there are a couple of places where the configured paths aren't caught (or so it would seem). Yours, -mm-

2 2

[Dovecot] dovecot 1.0-test52 compile notes
by Mark E. Mallett 08 Nov '04

08 Nov '04

Compile issues on an older BSD/OS 4.2 system: src/lib/byteorder.h needs #include <netinet/in.h> to pick up in_addr struct src/lib/byteorder.c no "libgen" here (no basename()). Added it inline, no big deal, but you might want to have configure test for this and provide one if it's missing. Also, on this system there are no types like "uint8_t" and "uint64_t" -- instead there are the u_int8_t and u_int64_t et al types. I added some global typedefs, but I gather this is a somewhat common issue, so you might want to test for these. -mm-

2 2

[Dovecot] Runas Question
by Chris L. Franklin 08 Nov '04

08 Nov '04

Okay heres a weird question is there anyways to make dovecot run as root ? Heres why: I'm currently using XMail email server (smtp/pop3/virtual accounts). And I love using it. But it really must run as root. I've tryed all the non-root solutions for it. and really I'd prefer to have it run as root. And I'd like to really use dovecot as (on server with xmail). Currently I've got it running with some sendmail server and a few postfixs But really I'd like to get it working with Xmail. So if anyone has any Ideas or how to get Dovecot to run as root. PS. I know the Idea behind dovecot is security and how it's coded to be able to run using non-root accont. So please I'm really only looking for ways to get dove to run as root. And not new ways of reconfiguring my smtp servers so as they don't need to be run as root. -- Chris L. Franklin --

2 1

[Dovecot] strange timeout with ssl
by Arnaud Lacroix 08 Nov '04

08 Nov '04

Hello, First sorry for my poor english. slack 9.1 dovecot-0.99.11 (thanks for this) compiled with openssl (0.9.7b) MUA : Mozilla 1.5 (win32) Under a ssl session, at first, it's work. But a later ago, i recieved alway, when i tried to contact the server imap : "connecting to <host> timed out ..." This fact is never without ssl. No dns problems. I don't know how can i help you my best because i don't see the problem. So, i give you this information. Hope it will be help you for a solution. But its seem to be ok. #openssl s_client -host localhost -port 993 -verify -debug ... ... --- SSL handshake has read 841 bytes and written 340 bytes --- New, TLSv1/SSLv3, Cipher is AES256-SHA Server public key is 1024 bit SSL-Session: Protocol : TLSv1 Cipher : AES256-SHA Session-ID: ED349971D46EC76E2F75BB80ED52A0D081CE10B609F4761E176361629C9AE6AD Session-ID-ctx: Master-Key: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Key-Arg : None Start Time: 1099614038 Timeout : 300 (sec) Verify return code: 18 (self signed certificate) --- * OK dovecot ready. // timeout : * BYE Disconnected for inactivity. read:errno=0 Thanks very much. Regards, Arnaud Lacroix.

4 4

[Dovecot] Unread mail problem
by Clinton Mills 08 Nov '04

08 Nov '04

Okay, here is the set up. I have Outlook set up to keep mail on the server for 5 days. At some point I started downloading all my mail that was on the server over and over again, even though I already have the mail. The weird thing is that it did not download all the mail, just a few. For example it would download 6 messages, then 18, then 12, etc! After I tried it a few times I had 50 of the same message in Outlook? A small fix, but I do not want to so this ever time If I unclick save on server and then check my mail, it will delete all the mail in my mail box. Then I reclick the leave on server for 5 days and it will work fine! Any idea what is going on? Clinton Hitcents.com Tel: (270) 796-5063 ext 105# Fax: (270) 796-3195 Cell: (270) 996-1122

2 1