- dovecot - dovecot.org

[Dovecot] Deleting a mailbox and all its children
by Micah Anderson 16 Nov '11

16 Nov '11

I'm looking at scripting a mechanism to delete a mailbox, which is easy with 'doveadm mailbox delete' -- however it gets complicated when there are children of arbitrary depth, for example, I may have this: restored.daily1.INBOX restored.daily1.Sent restored.daily1.Mystuff restored.daily1.Mystuff.foo I would like to delete the 'restored' mailbox and all its children (and unsubscribe the folders), but the 'doveadm mailbox delete' command wont delete any children. I'm surprised that there isn't a -r (recursive) option to 'doveadm mailbox delete', but perhaps I am missing the easier way to handle this? thanks for any ideas or suggestions! micah --

3 2

[Dovecot] Excessive imap-logins, never die
by Nick Edwards 16 Nov '11

16 Nov '11

Hiya, Today I note there are 38 imap-logins that seem to be stale on our staff imap server, they do not seem to die off, new imap-logins are created with new logins and exit accordingly. Now, these are from our monitoring software that runs on another server on our LAN. Our corporate link was taken down for 2 hours for urgent relocation of fibre (demolishing old adjoining building, and just in case, they needed to move it which we were glad about), so, this begs the question, why would imap-logins be there I guess in some sort of wait state, even with a still working internal DNS (internal view as well) the only difference is no actual internet connection in this time. A week ago when they first started to working and we lost internet for 45 minutes I also saw a few extra stale imap-logins, but after todays events, I decided this is a bigger issue that needs to be looked into, as dovecot required a restart to clear it all (I wasnt going to sit there killing individual PIDs all evening). Dovecot version 1.2.17, built from source

2 2

Re: [Dovecot] default Dovecot-LDA CHGRP/CHMOD
by Chris Young 15 Nov '11

15 Nov '11

I am familiar with this article http://wiki.dovecot.org/LDA#multipleuids I want to disable setuid-root, but I don't know the default group and permissions. sudo chgrp root /usr/libexec/dovecot/dovecot-lda sudo chmod 00750 /usr/libexec/dovecot/dovecot-lda but my delivery is still failing Nov 9 18:22:39 vl42 postfix/pipe[23039]: DEC54700B1: to=<user(a)domain.com>, orig_to=<user(a)domain.com>, relay=dovecot, delay=0.05, delays=0.04/0/0/0.01, dsn=4.3.0, status=deferred (temporary failure. Command output: pipe: fatal: pipe_command: execvp /usr/libexec/dovecot/dovecot-lda: Permission denied ) Thoughts? Thanks Chris

2 2

[Dovecot] Seg fault in dovecot/auth 2.0.15
by Mark Goldey 15 Nov '11

15 Nov '11

Folks: I've been running Dovecot 2.0.7 on a Qmail / Vpopmail installation built on Debian Squeeze, with no problems for about a year. Dovecot is used for IMAP/S auth only. Dovecot is built from source. I just upgraded to 2.0.15 but it segfaults whenever an IMAP auth is attempted, regardless of the user who tries to login, whether by webmail (Roundmail) Android phone (K-9 Mail) or iPad (Roundmail) I downgraded to 2.0.13 but the segfault persisted. Re-installed 2.0.7 and that cleared it right up. Here's the pertinent details from 2.0.15. Anything else I can provide? root@XXX:/# uname -a Linux XXX 2.6.32-5-686 #1 SMP Wed Jan 12 04:01:41 UTC 2011 i686 GNU/Linux root@XXX:/# dovecot -n # 2.0.15: /usr/local/etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-686 i686 Debian 6.0.3 auth_debug = yes auth_debug_passwords = yes auth_verbose = yes auth_verbose_passwords = plain disable_plaintext_auth = no first_valid_uid = XXXX last_valid_uid = XXXX log_path = /var/log/dovecot.log mail_debug = yes passdb { driver = vpopmail } protocols = imap service imap-login { inet_listener imap { address = * port = 143 } inet_listener imaps { address = * port = 993 } process_limit = 128 vsz_limit = 64 M } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = vpopmail } verbose_ssl = yes Here's a failed login transaction from /var/log/dovecot [snip -- 10 lines or so. The SSL handshake completes OK] Nov 15 14:08:43 auth: Debug: client in: AUTH 1 PLAIN service=imap secured lip=192.xxx.xxx.xxx rip=174.79.xxx.xxxlport=143 rport=55437 resp=XYXYXYXYXYXXYXYXYXYXYXYXYXYX== Nov 15 14:08:43 auth-worker: Debug: Loading modules from directory: /usr/local/lib/dovecot/auth Nov 15 14:08:43 auth-worker: Debug: vpopmail(user(a)mydomain.net,174.79.xxx.xxx): lookup user=user domain=domain.net Nov 15 14:08:43 auth: Debug: client out: OK 1 user=user(a)mydomain.net Nov 15 14:08:43 auth: Debug: master in: REQUEST 2710831105 686 1 XYXYXYXYXYXXYYXYXYX Nov 15 14:08:43 auth-worker: Debug: vpopmail(user(a)domain.net,174.79.xxx.xxx): lookup user=user domain=domain.net Nov 15 14:08:43 auth: Error: auth worker: Aborted request: Worker process died unexpectedly Nov 15 14:08:43 master: Error: service(auth-worker): child 690 killed with signal 11 (core dumped) Nov 15 14:08:43 auth: Debug: master out: FAIL 2710831105 Nov 15 14:08:43 imap: Error: Internal auth failure (client-pid=686 client-id=1) Nov 15 14:08:43 imap-login: Info: Internal login failure (pid=686 id=1) (auth failed, 1 attempts): user=<user(a)domain.net>, method=PLAIN, rip=174.79.xxx.xxx, lip=192.xxx.xxx.xxx, mpid=691, TLS Nov 15 14:08:43 imap-login: Warning: SSL alert: where=0x4008, ret=256: warning close notify [174.79.xxx.xxx] Nov 15 14:08:43 auth-worker: Debug: Loading modules from directory: /usr/local/lib/dovecot/auth I ought to mention that /usr/local/lib/dovecot/auth is empty. Here's the backtrace: root@XXX:/# gdb /usr/local/libexec/dovecot/auth /usr/local/var/run/dovecot/core GNU gdb (GDB) 7.0.1-debian [snip] Reading symbols from /usr/local/libexec/dovecot/auth...done. warning: Can't read pathname for load map: Input/output error. Reading symbols from /usr/local/lib/dovecot/libdovecot.so.0...done. Loaded symbols for /usr/local/lib/dovecot/libdovecot.so.0 Reading symbols from /lib/i686/cmov/libcrypt.so.1...Reading symbols from /usr/lib/debug/lib/i686/cmov/libcrypt-2.11.2.so...done. (no debugging symbols found)...done. Loaded symbols for /lib/i686/cmov/libcrypt.so.1 Reading symbols from /home/vpopmail/lib/libvpopmail.so...(no debugging symbols found)...done. Loaded symbols for /home/vpopmail/lib/libvpopmail.so Reading symbols from /lib/i686/cmov/libdl.so.2...Reading symbols from /usr/lib/debug/lib/i686/cmov/libdl-2.11.2.so...done. (no debugging symbols found)...done. Loaded symbols for /lib/i686/cmov/libdl.so.2 Reading symbols from /lib/i686/cmov/librt.so.1...Reading symbols from /usr/lib/debug/lib/i686/cmov/librt-2.11.2.so...done. (no debugging symbols found)...done. Loaded symbols for /lib/i686/cmov/librt.so.1 Reading symbols from /lib/i686/cmov/libc.so.6...Reading symbols from /usr/lib/debug/lib/i686/cmov/libc-2.11.2.so...done. (no debugging symbols found)...done. Loaded symbols for /lib/i686/cmov/libc.so.6 Reading symbols from /lib/ld-linux.so.2...Reading symbols from /usr/lib/debug/lib/ld-2.11.2.so...done. (no debugging symbols found)...done. Loaded symbols for /lib/ld-linux.so.2 Reading symbols from /lib/i686/cmov/libpthread.so.0...Reading symbols from /usr/lib/debug/lib/i686/cmov/libpthread-2.11.2.so...done. (no debugging symbols found)...done. Loaded symbols for /lib/i686/cmov/libpthread.so.0 Reading symbols from /home/vpopmail/etc/vpopmail.authmodule...(no debugging symbols found)...done. Loaded symbols for /home/vpopmail/etc/vpopmail.authmodule Core was generated by `dovecot/auth -w'. Program terminated with signal 11, Segmentation fault. #0 0x00000000 in ?? () (gdb) bt full #0 0x00000000 in ?? () No symbol table info available. #1 0x08059890 in auth_worker_handle_user (client=0x82b34d0) at auth-worker-client.c:405 auth_request = 0x82b56e8 userdb_id = 1 #2 auth_worker_handle_line (client=0x82b34d0) at auth-worker-client.c:534 id = 2 #3 auth_worker_input (client=0x82b34d0) at auth-worker-client.c:614 _data_stack_cur_id = 3 line = <value optimized out> ret = 232 #4 0xb785f021 in io_loop_call_io (io=0x82b3688) at ioloop.c:384 ioloop = 0x82a6398 t_id = 2 #5 0xb78600d3 in io_loop_handler_run (ioloop=0x82a6398) at ioloop-epoll.c:213 ctx = 0x82b1f38 event = 0x82b1f78 list = 0x82b36b0 io = 0x829e2b0 tv = {tv_sec = 2147483, tv_usec = 0} msecs = 1 ret = 1 i = 0 j = 0 call = 192 #6 0xb785efa0 in io_loop_run (ioloop=0x82a6398) at ioloop.c:405 No locals. #7 0xb784abaa in master_service_run (service=0x82a62e8, callback=0x805c470 <worker_connected>) at master-service.c:481 No locals. #8 0x0805c828 in main (argc=2, argv=0x82a61c0) at main.c:298 c = <value optimized out> (gdb) --mhg

2 1

[Dovecot] Dovecot SASL on another machine
by Tobias Hachmer 15 Nov '11

15 Nov '11

Hello list, is there a way to use Dovecot SASL Authentication for submission on a different machine dovecot runs? e.g.: Dovecot machine <-> postfix machine(for submission) How can I authenticate my senders on a different physical machine against Dovecot SASL? Thanks, Tobias

3 6

[Dovecot] indexes permissions problem
by Mark Hanford 15 Nov '11

15 Nov '11

Hey all, I did a search but didn't find the answer to my problem, so here goes. I've got a centos 6 server running Dovecot 2.0.beta6 (3156315704ef). For legacy reasons (I'm moving mail from a Dovecot 1.1.1 and FreeBSD box with user home directories NFS mounted), my index files are setup to be in /u/indexes/ On the Dovecot 1.1.1 installation, the perms on the indexes directory is 777 with root:mail ownership. The same thing on the Dovecot 2 / Centos server results in a 'permission denied' error when Dovecot tries to create files. So, I guess my main question is, what perms and ownership should /u/indexes be set to? I've tried several different things before this cry for help... Thanks. Mark

2 1

[Dovecot] Limit the number of pop/imap requests
by wwl 15 Nov '11

15 Nov '11

Hello Group, is it possible to Limit the number of pop/imap requests to Dovecot? I read the Wiki and found max_mail_processes = 512 is this the way to limit this ? dovecot --version 1.2.15 Thanx for help Christian

2 1

[Dovecot] Dovecot 2.0.15 quota configuration with mbox
by David Ocana 15 Nov '11

15 Nov '11

Hello, I've been trying to set up dovecot 2.0.15, everything seems to work pretty well except for the quota feature. I would like to set a quota limit only for the Inbox folder. I configured two namespaces, according to some posts from Timo Sirainen (http://dovecot.org/list/dovecot/2006-July/014530.html) & (http://www.dovecot.org/list/dovecot/2011-January/056131.html) but I can't configure the quota plugin to act the way I pretend. Here's my namespace configuration: namespace { separator = / prefix = INBOX/ location = mbox:/var/empty:INBOX=/mail/%d/%n:INDEX=/var/dovecot/%d/%n inbox = yes hidden = yes } namespace { separator = / prefix = inbox = no location = mbox:/mail/%d/MAILBOXES/%n:INDEX=/var/dovecot/%d/%n } Quota config: plugin { quota = dirsize:User quota # I've tried with: quota_rule = INBOX:storage=819200K quota_rule = INBOX/*:storage=819200K quota_rule = INBOX/Inbox:storage=819200K # Works with: quota_rule = *:storage=819200K quota_rule = ?:storage=819200K (Same behavior as '*') } Using '*' and '?', is the only way I get it to work, but obviously, quota is calculated summing up all the mailbox folders. I don't know what else to change, any ideas? Is the two namespace configuration correct? Thanks in advance. David

2 3

[Dovecot] Migration From Courier Imap.
by Rajeev Sharma 15 Nov '11

15 Nov '11

Sir, I am using vpopmail,qmail along with courier-imap 4.0 i want to migrate from courier to dovecot but i have 100 shared folder under /home/vpopmail/domains/domain.com/Malidir and user shared them on the basis of rights assign. I am very much clear how to migrate from courier to dovecot but i am unable how to migrate shared folder and assign rights. Rajeev Sharma. -- Rajeev Sharma

2 1

[Dovecot] getenv() in plugin not working
by Trutwin, Joshua 15 Nov '11

15 Nov '11

Hi - new to the list, can't find much on this using google. I'm trying to setup the dovecot DRAC plugin as described here: http://wiki.dovecot.org/HowTo/PopBSMTPAndDovecot#DRAC DRAC is installed and running using this startup command: /usr/local/sbin/rpc.dracd -i -e 5 /etc/postfix/dracd.db I downloaded the drac.c file linked on the above URL: http://www.dovecot.org/patches/1.1/drac.c and built it using this command: gcc -Wall -W -shared -fPIC -DHAVE_CONFIG_H drac.c -I/usr/include/dovecot -L/usr/lib64/dovecot -o drac.so -ldrac Then I copied drac.so to /usr/lib64/dovecot (this is an x86_64 SL 6.1 system - dovecot 2.0.9) and modified my /etc/dovecot/conf.d/20-imap.conf file: mail_plugin_dir = /usr/lib64/dovecot mail_plugins = drac Restart dovecot and try to login and getting these messages for ANY login attempts: dovecot: imap-login: Login: user=<snip>, method=PLAIN, rip=<snip>, lip=<snip>, mpid=4018, TLS server dovecot: imap(<snip>: Error: DRAC: IP environment not given I traced the "IP environment not given" to the drac.c plugin file, and the code is pretty simple: void drac_init(void) { const char *ip_str; struct ip_addr ip; ip_str = getenv("IP"); if (ip_str == NULL) i_error("DRAC: IP environment not given"); Is there anything special that needs to be done for getenv("IP") to report the login IP? I tried to put getenv("RIP") for remote ip and even getenv("USER") as well but always get NULL. Is this API only for dovecot 1.x? If so is there a 2.0 equivalent? The rest of the plugin is very basic... I think this is the last step in getting this setup running. I'd have to have this one last piece force me to run that icky perl program instead. Thank you, Let me know if anything else is needed. Josh

3 3