- dovecot - dovecot.org

[Dovecot] qmail + dovecot-lda
by ckubu 17 Nov '10

17 Nov '10

hallo, i am changing my mailsetups to qmail+vpopmail+dovecot. is it possible to let dovecot's lda deliver mail into mailboxes but also deliver mails to forward-addresses in .qmail-files, if exists? b.t.w. i know, its not an dovecot issue, but maybe anyone knows: i have setup defaultdelivery in qmail-control directory, but vadddomain ignors it. is there a way to make that entry the default for .qmail-default files? thanks christoph

2 2

[Dovecot] Single-instance storage Thank You
by Daniel L. Miller 17 Nov '10

17 Nov '10

Timo, On following my previous thread that went somewhat off-topic, I noticed - or rather failed to notice - any response from you. This leaves me to draw one of the following conclusions: 1. You didn't see it. 2. You ignored it. 3. You saw it, took offense, and disregarded it. 4. You saw it, accepted the compliment for what it was - and didn't bother to respond. On the chance any of options 1-3 apply - please allow me to state as clearly as possible: your creation, that of Dovecot in general, and single-instance mdbox storage in particular, have significantly contributed to my own ease of system administration - and I offer my sincere thanks and admiration. -- Daniel

2 1

[Dovecot] Help - custom vpopmail
by Rick Romero 16 Nov '10

16 Nov '10

Hi, First, I'm not sure if dovecot should alter this, but it seems vpopmail writes the IP into the 'remote_ip' field instead of the auth type. Dovecot still writes the auth type. I want both. So I modified my vpopmail install to write an additional field into the lastauth table. My custom vpopmail writes the remote IP into remote_ip, and the auth type into a 'type' field. I tested with qmail's POP3 daemon to verify vchkpw would fill the table correcly. But I'm not sure how to get dovecot to do it: I know this is close, but there is something not right in src/auth/userdb-vpopmail.c line 99. vset_lastauth(vpop_user, vpop_domain, &auth_request->remote_ip, t_strdup_noconst(auth_request->service)); I'm, by far, NOT a C programmer - Feel free to laugh at my code publicly :) Thanks, Rick

2 2

[Dovecot] v2.0.7 released
by Timo Sirainen 16 Nov '10

16 Nov '10

http://dovecot.org/releases/2.0/dovecot-2.0.7.tar.gz http://dovecot.org/releases/2.0/dovecot-2.0.7.tar.gz.sig * master: default_process_limit wasn't actually used anywhere, rather the default was unlimited. Now that it is enforced, you might notice that the default limit is too low and you need to increase it. Dovecot logs a warning when this happens. * mail-log plugin: Log mailbox name as virtual name rather than physical name (e.g. namespace prefix is included in the name) + doveadm dump: Added imapzlib type to uncompress IMAP's COMPRESS DEFLATE I/O traffic (e.g. from rawlog). - IMAP: Fixed LIST-STATUS when listing subscriptions with subscriptions=no namespaces. - IMAP: Fixed SELECT QRESYNC not to crash on mailbox close if a lot of changes were being sent. - quota: Don't count virtual mailboxes in quota - doveadm expunge didn't always actually do the physical expunging - Fixed some index reading optimizations introduced by v2.0.5. - LMTP proxying fixes

4 12

[Dovecot] auth-worker ownership issue
by Jason 'XenoPhage' Frisvold 16 Nov '10

16 Nov '10

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Greetings, I installed 2.0.7 this evening and I'm getting these messages in /var/log/maillog : Nov 8 23:36:53 myserver dovecot: auth: Fatal: net_connect_unix(auth-worker) in directory /var/run/dovecot failed: Permission denied (euid=89(vpopmail) egid=89(vchkpw) missing +r perm: auth-worker, euid is not dir owner) Nov 8 23:36:53 myserver dovecot: master: Error: service(auth): command startup failed, throttling If I change the ownership of /var/run/dovecot/auth-worker to vpopmail, dovecot starts working properly. However, restarting the service results in this file being re-owned by dovecot. Am I missing a config option somewhere? I'm using dovecot with qmail and vpopmail 5.4.32. Thanks, - --------------------------- Jason 'XenoPhage' Frisvold xenophage(a)godshell.com - --------------------------- "Any sufficiently advanced magic is indistinguishable from technology." - - Niven's Inverse of Clarke's Third Law -----BEGIN PGP SIGNATURE----- Version: GnuPG/MacGPG2 v2.0.14 (Darwin) iEYEARECAAYFAkzY1OUACgkQ8CjzPZyTUTQVtQCgi3E0N9IL/kBdT59p0CxpU11u 5YMAoIA+2338GzFkRDt8ymusl73tJM07 =cVkA -----END PGP SIGNATURE-----

2 1

[Dovecot] Virtual Folder by user.
by Henrique Fernandes 16 Nov '10

16 Nov '10

Can i only set a virtual folder for especific users ? dovecot 2.0.6. Thanks! []'sf.rique

2 1

[Dovecot] REpeated POP3 mail
by The Doctor 16 Nov '10

16 Nov '10

I know I have brought this up before. Question: How can one debug the pop3 process from repeated e-mail ? -- Member - Liberal International This is doctor(a)nl2k.ab.ca Ici doctor(a)nl2k.ab.ca God, Queen and country! Never Satan President Republic! Beware AntiChrist rising! http://twitter.com/rootnl2k http://www.facebook.com/dyadallee Lest we Forget!!

2 5

[Dovecot] dsync mbox->mdbox: Unexpectedly lost From-line and other issues from a big conversion.
by Axel Thimm 16 Nov '10

16 Nov '10

Hi, I'm trying to convert a 33GB mail store from mbox to compressed mdbox (largest mbox is 2.7GB). The source store is live, e.g. there are mails delivered into it and mails are being read. Actually it is my own mail. :) Although my test runs were very successful I have run into trouble with the first run on the whole store. After fighting a bit around with errors like Error: Trying to open a non-listed mailbox with guid=f59c5b31b8f3df4c70180000e7dd553b I did several reruns in case these errors would be fixed on the next iteration, but my mdbox storage wasn't growing anymore. I decided to restart after removing all old index files from the source store in case I had some corruption somewhere. Since on mbox/maildir index files are completely recreatable this would just slow down thing at the worst. Indeed many of the errors went away, and I managed to convert about 10-20%, but then I hit another array of errors that would persist even after restarting: > $ grep -v Info: dsync2.log.old* > dsync2.log.old1:dsync(user): Error: Next message unexpectedly lost from mbox file /home/user/mail/lists/mplayerhq.hu/ffmpeg-devel at 58706201 (cached) > dsync2.log.old1:dsync(user): Error: read(msg input) failed: Invalid argument > dsync2.log.old1:dsync(user): Error: Next message unexpectedly lost from mbox file /home/user/mail/lists/gnupg.org/gnupg-users at 6507197 (cached) > dsync2.log.old1:dsync(user): Error: Unexpectedly lost From-line from mbox file /home/user/mail/lists/gnupg.org/gnupg-users at 6486645 > dsync2.log.old2:dsync(user): Error: mdbox /home/user/mdbox/mailboxes/lists/mplayerhq.hu/ffmpeg-devel/dbox-Mails: map uid lost for uid 26483 > dsync2.log.old2:dsync(user): Error: msg guid lookup failed: Internal error occurred. Refer to server log for more information. [2010-11-15 02:36:21] > dsync2.log.old2:dsync(user): Warning: mdbox /home/user/mdbox/storage: rebuilding indexes > dsync2.log.old2:dsync(user): Error: Corrupted dbox file /home/user/mdbox/storage/m.1725 (around offset=697710): msg header has bad magic value > dsync2.log.old2:dsync(user): Warning: dbox: Copy of the broken file saved to /home/user/mdbox/storage/m.1725.broken > dsync2.log.old2:dsync(user): Warning: Transaction log file /home/user/mdbox/storage/dovecot.map.index.log was locked for 295 seconds > dsync2.log.old2:dsync(user): Error: Next message unexpectedly lost from mbox file /home/user/mail/lists/mplayerhq.hu/ffmpeg-devel at 58706201 (cached) > dsync2.log.old2:dsync(user): Error: read(msg input) failed: Invalid argument > dsync2.log.old2:dsync(user): Error: Next message unexpectedly lost from mbox file /home/user/mail/lists/gnupg.org/gnupg-users at 6507197 (cached) > dsync2.log.old2:dsync(user): Error: Unexpectedly lost From-line from mbox file /home/user/mail/lists/gnupg.org/gnupg-users at 6486645 > dsync2.log.old2:dsync(user): Error: Unexpectedly lost From-line from mbox file /home/user/mail/lists/gnupg.org/gnupg-users at 6507197 > dsync2.log.old2:dsync(user): Warning: Mailbox changes caused a desync. You may want to run dsync again. > dsync2.log.old3:dsync(user): Error: mdbox /home/user/mdbox/mailboxes/lists/mplayerhq.hu/ffmpeg-devel/dbox-Mails: map uid lost for uid 26484 > dsync2.log.old3:dsync(user): Error: msg guid lookup failed: Internal error occurred. Refer to server log for more information. [2010-11-15 09:49:26] > dsync2.log.old3:dsync(user): Warning: mdbox /home/user/mdbox/storage: rebuilding indexes > dsync2.log.old3:dsync(user): Error: Corrupted dbox file /home/user/mdbox/storage/m.1725 (around offset=758233): msg header has bad magic value > dsync2.log.old3:dsync(user): Error: link(/home/user/mdbox/storage/m.1725, /home/user/mdbox/storage/m.1725.broken) failed: File exists > dsync2.log.old3:dsync(user): Warning: Transaction log file /home/user/mdbox/storage/dovecot.map.index.log was locked for 271 seconds > dsync2.log.old3:dsync(user): Warning: Transaction log file /var/cache/dovecot/indexes/user/lists/lists.fedoraproject.org/.imap/users/dovecot.index.log was locked for 180 seconds > dsync2.log.old3:dsync(user): Error: Next message unexpectedly lost from mbox file /home/user/mail/lists/mplayerhq.hu/ffmpeg-devel at 58706201 (cached) > dsync2.log.old3:dsync(user): Error: read(msg input) failed: Invalid argument > dsync2.log.old3:dsync(user): Error: Next message unexpectedly lost from mbox file /home/user/mail/lists/gnupg.org/gnupg-users at 6507197 (cached) > dsync2.log.old3:dsync(user): Error: Unexpectedly lost From-line from mbox file /home/user/mail/lists/gnupg.org/gnupg-users at 6486645 > dsync2.log.old3:dsync(user): Error: Unexpectedly lost From-line from mbox file /home/user/mail/lists/gnupg.org/gnupg-users at 6507197 > dsync2.log.old3:dsync(user): Warning: Mailbox changes caused a desync. You may want to run dsync again. > dsync2.log.old4:dsync(user): Warning: Transaction log file /var/cache/dovecot/indexes/user/lists/lists.fedoraproject.org/.imap/scm-commits/dovecot.index.log was locked for 244 seconds > dsync2.log.old4:dsync(user): Warning: Transaction log file /var/cache/dovecot/indexes/user/lists/lists.fedoraproject.org/.imap/scm-commits/dovecot.index.log was locked for 186 seconds > dsync2.log.old4:dsync(user): Error: mdbox /home/user/mdbox/mailboxes/lists/mplayerhq.hu/ffmpeg-devel/dbox-Mails: map uid lost for uid 26485 > dsync2.log.old4:dsync(user): Error: msg guid lookup failed: Internal error occurred. Refer to server log for more information. [2010-11-15 12:40:24] > dsync2.log.old4:dsync(user): Warning: mdbox /home/user/mdbox/storage: rebuilding indexes > dsync2.log.old4:dsync(user): Error: Corrupted dbox file /home/user/mdbox/storage/m.1725 (around offset=1324287): msg header has bad magic value > dsync2.log.old4:dsync(user): Error: link(/home/user/mdbox/storage/m.1725, /home/user/mdbox/storage/m.1725.broken) failed: File exists > dsync2.log.old4:dsync(user): Warning: Transaction log file /home/user/mdbox/storage/dovecot.map.index.log was locked for 394 seconds > dsync2.log.old4:dsync(user): Warning: Transaction log file /var/cache/dovecot/indexes/user/lists/lists.fedoraproject.org/.imap/scm-commits/dovecot.index.log was locked for 249 seconds > dsync2.log.old4:dsync(user): Warning: Transaction log file /var/cache/dovecot/indexes/user/lists/lists.fedoraproject.org/.imap/scm-commits/dovecot.index.log was locked for 283 seconds > dsync2.log.old4:dsync(user): Error: Next message unexpectedly lost from mbox file /home/user/mail/lists/mplayerhq.hu/ffmpeg-devel at 58706201 (cached) > dsync2.log.old4:dsync(user): Error: read(msg input) failed: Invalid argument > dsync2.log.old4:dsync(user): Error: Next message unexpectedly lost from mbox file /home/user/mail/lists/gnupg.org/gnupg-users at 6507197 (cached) > dsync2.log.old4:dsync(user): Error: Unexpectedly lost From-line from mbox file /home/user/mail/lists/gnupg.org/gnupg-users at 6486645 > dsync2.log.old4:dsync(user): Error: Unexpectedly lost From-line from mbox file /home/user/mail/lists/gnupg.org/gnupg-users at 6507197 > dsync2.log.old4:dsync(user): Warning: Mailbox changes caused a desync. You may want to run dsync again. The quoted broken mdbox file and its successor differ quite late in the file itself: > $ ls -ltrA mdbox/storage/| tail > -rw------- 1 user user 2096503 2010-11-15 01:53 m.1719 > -rw------- 1 user user 2095681 2010-11-15 01:53 m.1720 > -rw------- 1 user user 2095121 2010-11-15 01:53 m.1721 > -rw------- 1 user user 2091386 2010-11-15 01:53 m.1722 > -rw------- 1 user user 2095194 2010-11-15 01:53 m.1723 > -rw------- 1 user user 2095317 2010-11-15 01:54 m.1724 > -rw------- 1 user user 697754 2010-11-15 01:54 m.1725.broken > -rw------- 1 user user 28818176 2010-11-15 13:04 dovecot.map.index > -rw------- 1 user user 14884 2010-11-15 14:49 dovecot.map.index.log > -rw------- 1 user user 1661548 2010-11-15 14:49 m.1725 > $ cmp mdbox/storage/m.1725.broken mdbox/storage/m.1725 > mdbox/storage/m.1725.broken mdbox/storage/m.1725 differ: byte 697638, line 7642 I'm running the process as the user himself with > $ dsync -vD backup mdbox:~/mdbox while my config looks like $ doveconf -n # 2.0.7: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32.21-168.fc12.x86_64 x86_64 Fedora release 12 (Constantine) mail_location = mbox:~/mail:INBOX=/var/mail/% u:INDEX=/var/cache/dovecot/indexes/%u mail_plugins = " zlib" managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date mbox_write_locks = fcntl namespace { inbox = yes location = prefix = separator = / } passdb { driver = pam } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve zlib_save = bz2 } service imap { executable = imap postlogin } service postlogin { executable = script-login rawlog } ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { driver = passwd } protocol lda { info_log_path = /var/log/dovecot-deliver.log log_path = /var/log/dovecot-deliver-errors.log mail_plugins = sieve } protocol imap { mail_plugins = " zlib imap_zlib" } I think I probably have some corrupt mbox files that give dovecot some headache. I'd like to spot them and correct them, so I tried let's convert to maildir first, which I can debug more easily. Unfortunatly the conversion speed to maildir is about 25 times slower than converting to mdbox (wow!), and it would take almost 5 days to convert to maildir. This is no sane timeframe for debugging, so I'd rather try different tactics with mdbox. One thing I'm going to try is to do an offline conversion of a snapshot of the store. Anyway I wanted to document the issues I saw in case it is something that is a bug in dovecot. -- http://thimm.gr/ - http://ATrpms.net/

2 4

[Dovecot] Email backend monitor script for Director
by Aliet Santiesteban Sifontes 16 Nov '10

16 Nov '10

Hi people, I know I saw this at some point in the list but can't find it, I need a script wich monitor the health of the email backend and if a node fails remove it from the director server, once is up again add it, I plan tu run the script at the load balancer, if you have some let me know.. thank's in advance

1 1

[Dovecot] POP users complaining about multiple copies of mail
by H. Wade Minter 16 Nov '10

16 Nov '10

Hello, We just switched from UW to Dovecot for our mail server. The transition went smoothly, except we have some users complaining about their email clients re-downloading mail or getting multiple copies of emails. When we go into their accounts, we only see one copy of the email, so I'm assuming there's something odd in the communication between their client and us that's causing the mail to get downloaded repeatedly. The clients that we've heard about are Outlook and one called "Goldmine". Has anyone run across this before? Scanning the archives didn't show me anything. This is Dovecot 1.2.12-1ubuntu8 on Ubuntu 10.10. Here's my config: # 1.2.12: /etc/dovecot/dovecot.conf # OS: Linux 2.6.35.4-rscloud x86_64 Ubuntu 10.10 log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap imaps pop3 pop3s managesieve ssl_ca_file: /etc/ssl/certs/ca.pem ssl_cert_file: /etc/ssl/certs/wildcard.skiltech.com.pem ssl_key_file: /etc/ssl/private/wildcard.skiltech.com.key disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login login_executable(managesieve): /usr/lib/dovecot/managesieve-login mail_privileged_group: mail mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_executable(managesieve): /usr/lib/dovecot/managesieve mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 mail_plugin_dir(managesieve): /usr/lib/dovecot/modules/managesieve imap_client_workarounds(default): outlook-idle delay-newmail imap_client_workarounds(imap): outlook-idle delay-newmail imap_client_workarounds(pop3): imap_client_workarounds(managesieve): pop3_enable_last(default): no pop3_enable_last(imap): no pop3_enable_last(pop3): yes pop3_enable_last(managesieve): no pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh pop3_client_workarounds(managesieve): lda: postmaster_address: postmaster mail_plugins: sieve quota_full_tempfail: yes deliver_log_format: msgid=%m: %$ rejection_reason: Your message to <%t> was automatically rejected:%n%r auth default: mechanisms: plain login passdb: driver: pam userdb: driver: passwd socket: type: listen client: path: /var/spool/postfix/private/dovecot-auth mode: 432 user: postfix group: postfix plugin: sieve: ~/.dovecot.sieve sieve_dir: ~/sieve

2 5