- dovecot - dovecot.org

[Dovecot] dovecot created mailbox empty - all mail forwarded to main MX server and cyrus-dovecot conflict
by Hans Neukomm 03 Jul '10

03 Jul '10

Hi all after lots of trial and error and the help of THIS mail list, finally my dovecot-postfix combination seems to work yet the dovecot mail spool always is empty all mail forwarded to my main mail server - but i have no mail relay configured. why is the mail NOT in the dovecot inbox but forwarded to another mail server ?? and why does postconf -A show cyrus and NOT dovecot ?? below some relevant config data. my goal is to have a clean simple dovecot+postfix mail system with nothing else (cyrus or so) involved when ever possible. ---------- DNS MX stuff dig mx kriyayoga.com ;; ANSWER SECTION: kriyayoga.com. 3600 IN MX 10 smtp.kriyayoga.com. kriyayoga.com. 3600 IN MX 0 mail.kriyayoga.com. the new dovecot setup is tested on smtp.kriyayoga.com and when successfully working shall be used on both mail MX servers. ---------- postfix stuff relevant to dovecot > postconf -A cyrus > postconf -a cyrus dovecot my postconf -n shows nothing about cyrus in the config NOR anything about mail-relay to my main MX relayhost = mailbox_transport = mailbox_command = smtpd_sasl_type = dovecot virtual_transport = dovecot ---------- below the mail log for sending mail to my dovecot box Jul 3 20:31:08 kriyayoga postfix/smtpd[27801]: connect from unknown[124.108.51.96] Jul 3 20:31:08 kriyayoga dovecot: auth(default): new auth connection: pid=27801 Jul 3 20:31:09 kriyayoga dovecot: auth(default): client in: AUTH#0111#011PLAIN#011service=smtp#011nologin#011lip=78.46.101.111#011rip=124.108.51.96#011resp=aGFucwBoYW5zAEk4Q3Nhd084MUR4Y1JlTTh1QmgwTA== Jul 3 20:31:09 kriyayoga dovecot: auth(default): passwd-file(hans,124.108.51.96): lookup: user=hans file=/etc/dovecot/passwd Jul 3 20:31:09 kriyayoga dovecot: auth(default): client out: OK#0111#011user=hans Jul 3 20:31:09 kriyayoga postfix/smtpd[27801]: BC90129D9F: client=unknown[124.108.51.96], sasl_method=PLAIN, sasl_username=hans Jul 3 20:31:10 kriyayoga postfix/cleanup[27807]: BC90129D9F: message-id=<201007032031.07830.hans(a)kriyayoga.com> Jul 3 20:31:10 kriyayoga postfix/qmgr[14627]: BC90129D9F: from=<hans(a)kriyayoga.com>, size=1287, nrcpt=2 (queue active) Jul 3 20:31:10 kriyayoga postfix/smtp[27808]: BC90129D9F: to=<hans(a)kriyayoga.com>, relay=mail.kriyayoga.com[88.198.14.45]:25, delay=0.95, delays=0.5/0.01/0.17/0.26, dsn=2.0.0, status=sent (250 Ok: queued as 97FCE138024) Jul 3 20:31:10 kriyayoga postfix/smtp[27808]: BC90129D9F: to=<hans(a)kriyayoga.com>, relay=mail.kriyayoga.com[88.198.14.45]:25, delay=0.95, delays=0.5/0.01/0.17/0.26, dsn=2.0.0, status=sent (250 Ok: queued as 97FCE138024) Jul 3 20:31:10 kriyayoga postfix/qmgr[14627]: BC90129D9F: removed at this point the mail is gone already - NO mail in my dovecot inbox - NO error - just automatically relayed to my main MX ---------- any help or tip or pointer to a howto is welcome and highly appreciated. greetings Hans <hans(a)kriyayoga.com> Cyberspace Ashram http://www.kriyayoga.com/

2 2

[Dovecot] dovecot: pop3-login: Internal login failure - howto add dovecot users that are NO server users
by Hans Neukomm 02 Jul '10

02 Jul '10

Hi all my Linux system: opensuse 11.2 my mail system: postfix - dovecot my key problem since several days googling and testing is: how can I have a pop account with dovecot for a user if that user is NO linux system user it appears to me that most auth mechanisms somehow expect a mail user also to be a linux system user either to be found in the /etc/passwd or /etc/alias on my 4 servers I have NO users at all registered, NO login at all for any normal user - incl me. I strictly work as root and with serverkey auth on a tightly secured system since many years my goal is to have the most simple possible mail system - one user to send/receive (me) may be a very few friends with a pop3 account - that's that I have since many years - using cyrus. now I want to move to dovecot and I missed somehow since many days searching to find a simple howto add mail users - just for mail - pop3 and smtp, no imap, no home directory, etc I think that most of the errors I get in my mail log are about user unknown, I try different variations of postfix main.cf found in www the result always is some error like the newest dovecot: pop3-login: Internal login failures - below the last mail log - after I added a user to /etc/passwd hans:x:1000:100:xxxx yyyyyyy::/sbin/nologin ------------- dovecot: auth(default): client in: AUTH#0111#011PLAIN#011service=pop3#011secured#011lip=127.0.0.1#011rip=127.0.0.1#011lport=110#011rport=53082#011resp=AGhhbnMASThDc2F3TzgxRHhjUmVNOHVCaDBM dovecot: auth(default): passwd-file(hans,127.0.0.1): lookup: user=hans file=/etc/dovecot/passwd dovecot: auth(default): client out: OK#0111#011user=hans dovecot: auth(default): master in: REQUEST#0112#01115510#0111 dovecot: auth(default): passwd(hans,127.0.0.1): lookup dovecot: auth(default): master out: USER#0112#011hans#011system_groups_user=hans#011uid=1000#011gid=100#011home= dovecot: dovecot: Relative home directory paths not supported (user hans): dovecot: pop3-login: Internal login failure (auth failed, 1 attempts): user=<hans>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured ------------- WITHOUT the user hans entry in /etc/passwd I get the following mail log errors ------------- Jul 1 02:43:01 kriyayoga dovecot: auth(default): new auth connection: pid=17860 Jul 1 02:43:22 kriyayoga dovecot: auth(default): client in: AUTH#0111#011PLAIN#011service=pop3#011lip=78.46.101.111#011rip=124.108.51.96#011lport=110#011rport=50152#011resp=AGhhbnMASThDc2F3TzgxRHhjUmVNOHVCaDBM Jul 1 02:43:22 kriyayoga dovecot: auth(default): passwd-file(hans,124.108.51.96): lookup: user=hans file=/etc/dovecot/passwd Jul 1 02:43:22 kriyayoga dovecot: auth(default): client out: OK#0111#011user=hans Jul 1 02:43:22 kriyayoga dovecot: auth(default): master in: REQUEST#0112#01117840#0111 Jul 1 02:43:22 kriyayoga dovecot: auth(default): passwd(hans,124.108.51.96): lookup Jul 1 02:43:22 kriyayoga dovecot: auth(default): passwd(hans,124.108.51.96): unknown user Jul 1 02:43:22 kriyayoga dovecot: auth(default): userdb(hans,124.108.51.96): user not found from userdb passwd Jul 1 02:43:22 kriyayoga dovecot: auth(default): master out: NOTFOUND#0112 Jul 1 02:43:22 kriyayoga dovecot: pop3-login: Internal login failure (auth failed, 1 attempts): user=<hans>, method=PLAIN, rip=124.108.51.96, lip=78.46.101.111 ------------- any help or pointer to a solution or howto setup dovecot pop3 accounts for non-system users would be MOST welcome greetings hans

3 4

[Dovecot] dovecot ldap search result ordering?
by chasye 02 Jul '10

02 Jul '10

I use openLDAP as dovecot pass/user db. here is main part of dovecot-ldap.conf: pass_attrs = mail=user, uid=userdb_home=/home/xadmin/%d/%$,userPassword=password pass_filter = (&(objectClass=posixAccount)(uid=%u)) default_pass_scheme = SSHA user_attrs = mail=user, uid=home=/home/xadmin/%d/%$ user_filter = (&(objectClass=posixAccount)(|(mail=%u)(mailAlias=%u))) It works fine, but some account failed to get their domain in pass_attrs. I check the log. when it success, the result order is "mail, uid, userPassword" when it failed, the order is "userPassword, uid, mail" we just use a username to login. I think dovecot cant get the domain before username changed to "username@domain". So can dovecot sort the result order and How? -- 　　多情卻似總無情，　　唯覺尊前笑不成。　　蠟燭有心還惜別，　　替人垂淚到天明。

3 4

[Dovecot] dovecot 1.2.11/ thunderbird 3.1 - moving folders
by Andre Hübner 02 Jul '10

02 Jul '10

Hello List, customers telled me problem when moving folders in thunderbird which i can confirm. Following setup on my side: dovecot 1.2.11 with mbox. Thunderbird 3.1 with ready mailaccount and "Server supports folders that contain sub-folders and messages" is disabled. i create folder1 for subfolders and in folder1 a folder2 for mails. Now i create folder3 on toplevel like just like folder1 for subfolders. Now i drag/dop folder2 to folder3. Thunderbird is moving this folder successful but in folder1/.imap i can still see a folder folder2 which is containing a dovecot.index.log At this point thunderbird shows error-message when i start to delete folder1. It tells: [CANNOT] Mailbox is'nt selectable: folder1. AND [NONEXISTENT] Directory folder1 is'nt empty, can't delete it. What to do now? Is error on my or thunderbirds side? Parts of my config needed? Thanks, Andre

3 7

[Dovecot] Quota in mysql dict not properly recalculated on 1.2?
by Joan 02 Jul '10

02 Jul '10

Good morning, I am trying to add quota storage on mysql following the guide in the wiki http://wiki.dovecot.org/Quota/Dict, and I am having some problems. My setup works fine for the newly created accounts, and correctly increases/decreases quota when necessary. The wrong part seems to be the recalculation. It seems to me that the system doesn't count the real occupation when it has to recreate the quota entry for a username. This is the case: .- User test(a)testing.com has a quota 200000 bytes, I delete the entry of the database for user, and then when I do the: echo 'x GETQUOTAROOT Inbox' | USER=test(a)testing.com /usr/sbin/dovecot --exec-mail imap .- These are ALL the queries I see, I am missing the userdb queries to get the real quota. INSERT INTO quota_dovecot (bytes,username) VALUES ('0','test(a)testing.com') ON DUPLICATE KEY UPDATE bytes='0' INSERT INTO quota_dovecot (messages,username) VALUES ('0','test(a)testing.com') ON DUPLICATE KEY UPDATE messages='0' COMMIT SELECT bytes FROM quota_dovecot WHERE username = 'test(a)testing.com' SELECT messages FROM quota_dovecot WHERE username = 'test(a)testing.com' .- And the result also seems to indicate that it's not reading the quota from userdb * PREAUTH [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS MULTIAPPEND UNSELECT IDLE CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS QUOTA] Logged in as test(a)testing.com * QUOTAROOT "Inbox" "user" * QUOTA "user" (STORAGE 0 1048576) x OK Getquotaroot completed. It seems to me that dovecot --exec-mail doesn't do the mysql lookups to get the usersdb. Note: attached are my dovecot -n output and the relevant .conf files

2 4

[Dovecot] Per-user quotas aren't working
by Guillaume CHARREYRON 02 Jul '10

02 Jul '10

Hello I tried to get per-user quotas working. The global quota is working well, but I can't get the one work on my test user: dovecot -n # 1.1.20: /etc/dovecot.conf # OS: Linux 2.6.18-164.el5 i686 Red Hat Enterprise Linux Server release 5.4 (Tikanga) log_path: /var/log/dovecot.log info_log_path: /var/log/dovecot.info.log protocols: pop3 login_dir: /var/run/dovecot/login login_executable: /usr/libexec/dovecot/pop3-login login_greeting: test-POP3 READY mail_location: maildir:~/Maildir mail_executable: /usr/libexec/dovecot/pop3 mail_plugins: quota mail_plugin_dir: /usr/lib/dovecot/pop3 pop3_client_workarounds: outlook-no-nuls oe-ns-eoh lda: postmaster_address: grog(a)test.mymail.srv mail_plugins: quota auth default: verbose: yes debug: yes debug_passwords: yes passdb: driver: passwd-file args: /etc/password.pop3 userdb: driver: passwd-file args: /etc/password.pop3 plugin: quota: maildir:User quota quota_rule: *:storage=10M quota_rule2: Trash:storage=1M with users line in my password.pop3 like this: test-oper:{plain}test-oper:501:501::/home/test-oper::userdb_quota_rule=*:bytes=2 0M allow_nets=192.168.4.0/24 I know that this file is well understood since the allow_nets works well. But I don't know why, the specific user quota rule isn't taken. I also use the Dovecot deliver process. Here is the info log: dovecot: Jul 02 12:55:32 Info: auth(default): passwd-file(test-oper,192.168.4.239): lookup: user=test-oper file=/etc/password.pop3 dovecot: Jul 02 12:55:32 Info: auth(default): auth(test-oper,192.168.4.239): allow_nets: Matching for network 192.168.4.0/24 dovecot: Jul 02 12:55:32 Info: auth(default): client out: OK 1 user=test-oper dovecot: Jul 02 12:55:32 Info: auth(default): master in: REQUEST 1 4521 1 dovecot: Jul 02 12:55:32 Info: auth(default): passwd-file(test-oper,192.168.4.239): lookup: user=test-oper file=/etc/password.pop3 dovecot: Jul 02 12:55:32 Info: auth(default): master out: USER 1 test-oper uid=501 gid=501 home=/home/test-oper quota_rule=*:bytes=20M dovecot: Jul 02 12:55:32 Info: pop3-login: Login: user=<test-oper>, method=PLAIN, rip=192.168.4.239, lip=192.168.4.239, secured deliver(test-oper): Jul 02 12:55:47 Info: msgid=<11c5.0003.0000(a)test.mymail.srv>: save failed to INBOX: Quota exceeded (mailbox for user is full) deliver(test-oper): Jul 02 12:55:47 Info: msgid=<11c5.0003.0000(a)test.mymail.srv>: rejected: Quota exceeded (mailbox for user is full) deliver(grog): Jul 02 12:55:47 Info: msgid=<dovecot-1278068147-645784-0(a)test.mymail.srv>: saved mail to INBOX dovecot: Jul 02 12:56:13 Info: POP3(test-oper): Disconnected: Logged out top=0/0, retr=0/0, del=0/15, size=13816325 The corresponding maildirsize still show the global quota, and not the "test-oper" one: more /home/test-oper/Maildir/maildirsize 10485760S 13643547 15 I also tried to delete it, restart dovecot service, the result is the same. Do you have any idea? Guillaume

2 3

[Dovecot] do Dovecot userdb and passwd filles need to be postmap'd
by Hans Neukomm 02 Jul '10

02 Jul '10

Hi all I am unsure if dovecot files like userdb and passwd also need to be postmap'd i.e. postmap userdb or userdb passwd when I use the typical data format for creating userdp postmap outputs the error > postmap userdb postmap: warning: userdb, line 1: expected format: key whitespace value a clarification is welcome greetings hans

2 2

[Dovecot] address extension going into folder
by Phil Howard 02 Jul '10

02 Jul '10

Is it possible with a simple config change to make address extensions, e.g. alice+sales(a)example.com, go into a folder, e.g. .INBOX.sales, and do so ONLY if that folder already exists (and just go into INBOX if it does not exist)?

2 4

[Dovecot] Upgrade Too 1.2.11 Broke Everything
by Marcel Grandemange 01 Jul '10

01 Jul '10

Good Day. I have had dovecot working successfully for years now, however after a system update , dovecot refused to start up complaing that im not using absolute paths. It took a bit of hacking to get it working again as can be seen by the sql query, however now imap doesn't work anymore because of that change. Im lost!! dovecot --version 1.2.11 dovecot -n # 1.2.11: /usr/local/etc/dovecot.conf # OS: FreeBSD 8.1-PRERELEASE amd64 protocols: imap pop3 listen(default): * listen(imap): * listen(pop3): *:110 ssl: no disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login login_greeting: thavinci Ready verbose_proctitle: yes first_valid_uid: 125 first_valid_gid: 125 mail_access_groups: postfix mail_privileged_group: postfix mail_location: mbox:~:INBOX=/var/mail/%u mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 imap_client_workarounds(default): delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(imap): delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(pop3): pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh lda: postmaster_address: postmaster(a)example.com sendmail_path: /usr/sbin/sendmail auth default: passdb: driver: sql args: /usr/local/etc/dovecot-mysql.conf passdb: driver: sql args: /usr/local/etc/dovecot-mysql.conf userdb: driver: sql args: /usr/local/etc/dovecot-mysql.conf userdb: driver: sql args: /usr/local/etc/dovecot-mysql.conf In regards to this file the following was changed to make it work... mail_location = mbox:~:INBOX=/var/mail/%u Used to be: mail_location = mbox:~/mail/:INBOX=/var/mail/%u grep -v '^ *$#.*$\?$' dovecot-mysql.conf driver = mysql default_pass_scheme = CRYPT connect = host=xx.xx.xx.xx dbname=nameofdb user=dbuser password=dbpassword password_query = SELECT password FROM mailbox WHERE username = '%u' AND active = '1' user_query = SELECT maildir, concat('/var/mail/',maildir) AS home, 125 AS uid, 125 AS gid FROM mailbox WHERE username = '%u' AND active = '1' This query used to be: user_query = SELECT maildir, maildir AS home, 125 AS uid, 125 AS gid FROM mailbox WHERE username = '%u' AND active = '1' A snapshot of the maillog during failure Jun 29 11:50:15 thavinci postfix/qmgr[1469]: BA3DD9B4C9: removed Jun 29 11:50:49 thavinci dovecot: imap-login: Login: user=<me(a)thavinci.za.net>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured Jun 29 11:50:49 thavinci dovecot: IMAP(me(a)thavinci.za.net): Connection closed bytes=53/372 Jun 29 11:52:05 thavinci dovecot: imap-login: Login: user=<me(a)thavinci.za.net>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured Jun 29 11:52:05 thavinci dovecot: IMAP(me(a)thavinci.za.net): Connection closed bytes=53/372 Jun 29 11:52:05 thavinci dovecot: imap-login: Login: user=<me(a)thavinci.za.net>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured Jun 29 11:52:05 thavinci dovecot: IMAP(me(a)thavinci.za.net): stat(/var/mail/me(a)thavinci.za.net/.imap/INBOX) failed: Not a directory Jun 29 11:52:05 thavinci last message repeated 2 times Jun 29 11:52:05 thavinci dovecot: IMAP(me(a)thavinci.za.net): open() failed with subscription file /var/mail/me(a)thavinci.za.net/.subscriptions: Not a directory Jun 29 11:52:05 thavinci dovecot: IMAP(me(a)thavinci.za.net): Connection closed bytes=306/4046 As can be seen somehow it's trying to write to the mbox file and I have no idea why! And this is the db structure! SET FOREIGN_KEY_CHECKS=0; -- ---------------------------- -- Table structure for `mailbox_copy` -- ---------------------------- DROP TABLE IF EXISTS `mailbox_copy`; CREATE TABLE `mailbox_copy` ( `username` varchar(255) NOT NULL DEFAULT '', `password` varchar(255) NOT NULL DEFAULT '', `name` varchar(255) NOT NULL DEFAULT '', `maildir` varchar(255) NOT NULL DEFAULT '', `quota` int(10) NOT NULL DEFAULT '0', `domain` varchar(255) NOT NULL DEFAULT '', `created` datetime NOT NULL DEFAULT '0000-00-00 00:00:00', `modified` datetime NOT NULL DEFAULT '0000-00-00 00:00:00', `active` tinyint(1) NOT NULL DEFAULT '1', PRIMARY KEY (`username`), KEY `username` (`username`) ) ENGINE=MyISAM DEFAULT CHARSET=latin1 COMMENT='Postfix Admin - Virtual Mailboxes'; -- ---------------------------- -- Records of mailbox_copy -- ----------------------------

4 4

[Dovecot] Dovecot LDA/LDAP
by Frank den Hartog 01 Jul '10

01 Jul '10

I'm a total newbie with Dovecot LDA and LDAP. To be honoust, I don't know what I'm doing. My system runs CentOS 5.5, Postfix 2.3.3 and Dovecot 1.2.11. I try to set up Dovecot LDA. But whatever I'm trying, I fail. 2010-06-30T18:28:12.585128+02:00 h1690641 postfix/pipe[26443]: 84F012A00A55: to=<test(a)domain.com>, relay=dovecot, delay=0.07, delays=0.03/0.01/0/0.02, dsn=5.1.1, status=bounced (user unknown) My current situation: I'm using at the current server OpenLDAP, Postfix and Dovecot with the Postfix LDA. It works fine, but I want to use sieve. I've setup a second server. I'm using my current OpenLDAP directory. The configurations: /etc/dovecot.conf # 1.2.11: /etc/dovecot.conf # OS: Linux 2.6.18-028stab064.7 i686 CentOS release 5.5 (Final) reiserfs login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login mail_location: maildir:/home/vmail/%i/Maildir/ mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/imap mail_plugin_dir(imap): /usr/lib/dovecot/imap mail_plugin_dir(pop3): /usr/lib/dovecot/pop3 imap_client_workarounds(default): delay-newmail outlook-idle netscape-eoh imap_client_workarounds(imap): delay-newmail outlook-idle netscape-eoh imap_client_workarounds(pop3): pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh namespace: type: private separator: / location: maildir:/home/vmail/%i/Maildir/ inbox: yes hidden: yes list: yes subscriptions: yes lda: postmaster_address: postmaster(a)cocamsterdam.net sendmail_path: /usr/lib/sendmail auth_socket_path: /var/run/dovecot/auth-master auth default: passdb: driver: ldap args: /etc/dovecot-ldap.conf userdb: driver: ldap args: /etc/dovecot-ldap.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 432 user: vmail group: mail /etc/dovecot-ldap.conf hosts = host.server.com dn = cn=Manager,dc=domain,dc=com dnpass = blabla ldap_version = 3 base = dc=domain,dc=com user_attrs = homeDirectory=home,uidNumber=uid,gidNumber=gid user_filter = (&(objectClass=posixAccount)(uid=%u)) pass_attrs = uid=user,userPassword=password,\ homeDirectory=userdb_home,uidNumber=userdb_uid,gidNumber=userdb_gid pass_filter = (&(objectClass=posixAccount)(uid=%u)) /etc/postfix/main.cf (Virtual settings) virtual_alias_domains = $virtual_alias_maps virtual_alias_expansion_limit = 1000 virtual_alias_maps = $virtual_maps virtual_alias_recursion_limit = 1000 virtual_destination_concurrency_limit = $default_destination_concurrency_limit virtual_destination_recipient_limit = $default_destination_recipient_limit virtual_gid_maps = static:12 virtual_mailbox_base = /home/vmail/ virtual_mailbox_domains = /etc/postfix/domains.cf virtual_mailbox_limit = 51200000 virtual_mailbox_lock = fcntl virtual_mailbox_maps = ldap:/etc/postfix/ldap-users.cf virtual_minimum_uid = 100 virtual_transport = dovecot virtual_uid_maps = static:500 /etc/postfix/master.cf (Dovecot settings) dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/libexec/dovecot/deliver -f ${sender} -d ${recipient} /etc/postfix/domains.cf domain.com /etc/postfix/ldap-users.cf server_host = host.domain.com search_base = dc=domain,dc=com version = 3 query_filter = (&(objectclass=person)(mail=%s)) result_attribute = uid result_format = %s/Maildir/ I've used http://www.linuxmail.info as an example. That works fine, but I want more.

2 1