- dovecot - dovecot.org

[Dovecot] cur folder e-mails are not shown...
by Gonzalo Aguilar Delgado 31 May '10

31 May '10

Hi All! I realized that I have only e-mails from last 13 days. I see that I have lots more in the cur folder inside my Maildir folder. The problem is that I cannot see them. Permissions seems to be right: drwx------ 2 gaguilar gaguilar 1081344 2010-05-28 12:53 cur -rw------- 1 gaguilar gaguilar 4798145 2010-05-28 12:52 deliver.info -rw------- 1 gaguilar gaguilar 0 2010-04-17 21:17 deliver.log -rw------- 1 gaguilar gaguilar 191344 2010-05-28 12:51 dovecot.index -rw------- 1 gaguilar gaguilar 708608 2010-05-28 12:52 dovecot.index.cache -rw------- 1 gaguilar gaguilar 26356 2010-05-28 12:53 dovecot.index.log -rw------- 1 gaguilar gaguilar 35 2010-04-24 19:57 dovecot-keywords -rw------- 1 gaguilar gaguilar 746874 2010-05-28 12:52 dovecot-uidlist -rw------- 1 gaguilar gaguilar 8 2010-05-28 12:46 dovecot-uidvalidity -rw------- 1 gaguilar gaguilar 0 2010-04-17 00:45 dovecot-uidvalidity.4bc8e88d drwx------ 2 gaguilar gaguilar 32768 2010-05-28 12:52 new -rw------- 1 gaguilar gaguilar 2742243 2010-05-28 12:52 procmail.log -rw------- 1 gaguilar gaguilar 48 2010-05-28 12:46 subscriptions drwx------ 2 gaguilar gaguilar 4096 2010-05-28 12:52 tmp dovecot --version 1.1.11 What can be the problem? ____________________________________

3 5

[Dovecot] 1.2.11, mbox, new mail
by Stan Hoeppner 31 May '10

31 May '10

With 1.2.11 and mbox storage, the delay time in pulling new mail headers to the client from imap folders seems to be directly proportional to mailbox size, regardless of the number of new messages. At present, if the mailbox is large, pulling new headers is rather painfully slow. Is this expected behavior? Especially given that the client already has all the "old" mails in the folder cached, and thus wouldn't be asking for them? Is there a setting(s) I can change to optimize/fix this? -- Stan

4 8

[Dovecot] strange sieve situation
by Andy Dills 31 May '10

31 May '10

Hi there, I've been working on rolling out the "deliver" service so we can implement sieve. Dovecot 1.2.11, Postfix 2.6.6, FreeBSD 8, installed by ports. Clustered environment, NFS backend. Everything is working great for the most part, I'm using it to sort a copy of my personal email on a test server. However, I noticed two emails were not properly sorted. I had added a rule (using Ingo, nice little piece of software) to redirect the nightly FreeBSD security output emails into a folder "servers". However, nothing had triggered that rule, and the "Maildir/.servers" directory had not yet been created. Then, three of the "security outputs" came in at one time: May 29 03:01:48 mg8 dovecot: deliver(andytest(a)xecu.net): sieve: msgid=<20100529070108.F2F0B7F5D4(a)mail-out04.xecu.net>: failed to store into mailbox 'servers': Mailbox already exists May 29 03:01:48 mg8 dovecot: deliver(andytest(a)xecu.net): sieve: msgid=<20100529070109.D8F5E159913(a)mail-out01.xecu.net>: failed to store into mailbox 'servers': Mailbox already exists May 29 03:01:48 mg8 dovecot: deliver(andytest(a)xecu.net): sieve: msgid=<20100529070109.D8F5E159913(a)mail-out01.xecu.net>: stored mail into mailbox 'INBOX' May 29 03:01:48 mg8 dovecot: deliver(andytest(a)xecu.net): sieve: execution of script /mail/var/mail2/xecunet/andytest.xecu.net//.dovecot.sieve failed, but implicit keep was successful May 29 03:01:48 mg8 dovecot: deliver(andytest(a)xecu.net): sieve: msgid=<20100529070110.17A781B53B9(a)mail-out02.xecu.net>: stored mail into mailbox 'servers' May 29 03:01:48 mg8 dovecot: deliver(andytest(a)xecu.net): sieve: msgid=<20100529070108.F2F0B7F5D4(a)mail-out04.xecu.net>: stored mail into mailbox 'INBOX' May 29 03:01:48 mg8 dovecot: deliver(andytest(a)xecu.net): sieve: execution of script /mail/var/mail2/xecunet/andytest.xecu.net//.dovecot.sieve failed, but implicit keep was successful That's the order they appeared in my logfile. I'm assuming they were all sent to deliver at the same time, they all thought they needed to make the directory, the one with msgid 20100529070110.17A781B53B9(a)mail-out02.xecu.net was able to make the directory and get delivered, whereas the other two freaked out because they couldn't make the directory they thought needed to be made, and just sent the mail to the inbox. That's a reasonable approach, although I wonder if deliver/sieve could be (or perhaps "has been in 2.0") adjusted to more intelligently handle that edge case. Also, I'm wondering about "dovecot_destination_recipient_limit = 1". I have that set in my main.cf, but I'm not 100% positive it's taking effect. # grep dovecot /usr/local/etc/postfix/main.cf dovecot_destination_recipient_limit = 1 virtual_transport = dovecot # grep dovecot /usr/local/etc/postfix/master.cf dovecot unix - n n - - pipe flags=DRhu user=mailman argv=/usr/local/libexec/dovecot/deliver -f ${sender} -d ${recipient} # postconf | grep dovecot smtpd_sasl_type = dovecot virtual_transport = dovecot # postconf | grep destination_recipient_limit default_destination_recipient_limit = 50 lmtp_destination_recipient_limit = $default_destination_recipient_limit local_destination_recipient_limit = 1 relay_destination_recipient_limit = $default_destination_recipient_limit smtp_destination_recipient_limit = $default_destination_recipient_limit virtual_destination_recipient_limit = $default_destination_recipient_limit Is "dovecot_destination_recipient_limit" being converted into local_ ? Thanks, Andy --- Andy Dills Xecunet, Inc. www.xecu.net 301-682-9972 ---

2 1

[Dovecot] Unresolved client rejection
by Greg Pearson 31 May '10

31 May '10

Hi, would it be possible to prevent users who try to login from an unresolved IP from connecting to Dovecot IMAP? I have a suspicion that it should be done via the authentication module (ie PAM) but I am not sure (if this is the case could someone recommend a good resource or even a solution). For example sendmail has a relevant macro to achieve this, I was wondering if Dovecot can have similar behavior. Thanks

2 1

Re: [Dovecot] Dovecot and Apples Mail.app
by Gerhard Waldemair 31 May '10

31 May '10

thanks for your answer. There is only 1 Account in Mail.app I have imigratet from Courier and there I had no Problem with all the settings. Is it possible that the index file is damaged or something like that ? Gerhard Am 28.05.10 17:56, schrieb Timo Sirainen: > > On Thu, 2010-05-27 at 10:17 +0200, Gerhard Waldemair wrote: > > >> Now I have the problem, that I get mail under Mail.app double. (same >> header, Message-ID ,...) >> >> When I use Thudnerbird under MacOS there is all OK. >> > That doesn't make any sense. Only thing I can think of is that you > created two identical accounts to Mail.app.. > > >> Are there some Configs that I need to make for MacOS / Mail.app ? >> > No. > >

1 0

[Dovecot] imap folder aliases for different mail clients naming convention
by Robert Schetterer 31 May '10

31 May '10

Hi, sorry if this was asked before and/or if there is allready a solution different imap mail clients, have different imap folder naming conventions typical by sent , trash, spam i normally use thunderbird conventions, as its working on all major plattforms and configure hord/imp , squirrelmail to use it like thunderbird does, additional i use autocreate with this folders it would be nice to alias other mail clients naming conventions to TB folder naming conventions without poke around with i.e symlinks etc, i guess there might be some solution with namespaces but i hope i could be done more easy eventually with a alias plugin etc? -- Best Regards MfG Robert Schetterer Germany/Munich/Bavaria

1 0

Re: [Dovecot] Dovecot 1.2 - Quotas - Ignoring Trash folder
by e-frog 31 May '10

31 May '10

On 30.05.2010 15:28, wrote Shayne Jellesma: > Hello e-frog, > > Thanks for your reply. I have made the changes you suggested and it is still > not working. > > The new updated SQL query is as follows: > user_query = SELECT maildir, 5000 AS uid, 5000 AS gid, CONCAT('*:storage=', > quota, 'B') AS quota_rule, 'Trash:ignore' AS quota_rule2 FROM mailbox WHERE > username = '%u' AND active = '1' > Looks correct and works for me. You could try and set mail_debug=yes in dovecot.conf This should log the quota rules dovecot is using once you login. e.g. May 30 15:36:52 server dovecot: IMAP(xxx): Quota rule: root=user mailbox=* bytes=1073741824 messages=0 May 30 15:36:52 server dovecot: IMAP(xxx): Quota rule: root=user mailbox=Trash ignored > Regards, > > Shayne Jellesma > Network Administrator / ICT Support > St Martins Lutheran College > Web: http://www.stmartins.sa.edu.au > Skype: shayne.jellesma.smlc > > -----Original Message----- > From: dovecot-bounces+shayne=stmartins.sa.edu.au(a)dovecot.org > [mailto:dovecot-bounces+shayne=stmartins.sa.edu.au@dovecot.org] On Behalf Of > e-frog > Sent: Sunday, 30 May 2010 10:09 PM > To: dovecot(a)dovecot.org > Subject: Re: [Dovecot] Dovecot 1.2 - Quotas - Ignoring Trash folder > > Hello, > > On 30.05.2010 13:34, wrote Shayne Jellesma: >> Hello guys, >> >> Firstly I would like to state that I am fairly new to Dovecot. I have >> played around with it in the past here and there but mainly with debian > packages. >> I have compiled this version of Dovecot from source, so please go easy >> with me. >> >> Ok now down to my questions: >> I am having trouble getting Dovecot to 'ignore' the Trash folder when >> summing up the used quota for a user. > > [snip] > >> plugin: >> >> quota: maildir:ignore=Trash > > Change this to > > quota = maildir > > [snip] > >> >> charged:/usr/local/etc# grep -v '^ *$#.*$\?$' dovecot-sql.conf >> >> driver = mysql >> >> connect = host=localhost dbname=xxx user=mailuser password=xxx >> >> default_pass_scheme = MD5-CRYPT >> >> user_query = SELECT maildir, 5000 AS uid, 5000 AS gid, >> CONCAT('*:storage=', quota, 'B') AS quota_rule FROM mailbox WHERE >> username = '%u' AND active = '1' > > Insert a second quota_rule in your sql query > > 'Trash:ignore' AS quota_rule2 > > See also http://wiki.dovecot.org/Quota/1.1#Quota_rules > > Regards, > e-frog

2 2

[Dovecot] beta5 builds under RHEL
by Axel Thimm 31 May '10

31 May '10

Hi, beta4 built under RHEL4, RHEL5 and RHEL6 (the latter being the public beta). beta5 now builds only for RHEL5, the other two fail with: strnum.c: In function `str_to_llong': strnum.c:139: error: `LLONG_MIN' undeclared (first use in this function) strnum.c:139: error: (Each undeclared identifier is reported only once strnum.c:139: error: for each function it appears in.) Thanks! -- Axel.Thimm at ATrpms.net

4 16

[Dovecot] quota and postfix virtual users
by gbotero＠emailforall.no-ip.org 30 May '10

30 May '10

hi guys, anyone have a virtual server working with postfix + dovecot + roundcube + mysql + virtual domain + virtual users and quota working because the quota is not good, the calculation is wrong i need to delete the maildirsize file to force recalculate, how can i do? the email send and receive fine the virtual users and domain users is fine....... help postfix 2.3.3 dovecot 1.2.11 roundcube 0.3 mysql 5.0.7 i need to solve this please

2 1

[Dovecot] dovecot2beta5 lmtp
by Andreas Schulze 30 May '10

30 May '10

Hello, recently I inspected the sourcecode of the lmtp server. I searched for changes that would add return-path header. ( http://www.dovecot.org/list/dovecot/2010-February/046401.html ) But I found, that all mails are spooled via files in /tmp. ( dovecot2/srv/lmtp/commands.c ~line 695 ) has somebody experiences while delivering huge ammount of mail via dovecot2 lmtp service? - is it faster/slower/comaparable with deliver? - it's hard to believe, that nobody realy misses the return-path header Thanks, Andreas -- Andreas Schulze Internetdienste | P532 DATEV eG 90329 Nürnberg | Telefon +49 911 319-0 | Telefax +49 911 319-3196 E-Mail info @datev.de | Internet www.datev.de Sitz: 90429 Nürnberg, Paumgartnerstr. 6-14 | Registergericht Nürnberg, GenReg Nr.70 Vorstand Prof. Dieter Kempf (Vorsitzender) Dipl.-Kfm. Wolfgang Stegmann (stellvertretender Vorsitzender) Dipl.-Kfm. Michael Leistenschneider Jörg Rabe v. Pappenheim Dipl.-Vw. Eckhard Schwarzer Vorsitzender des Aufsichtsrates: Reinhard Verholen

4 3