- dovecot - dovecot.org

[Dovecot] Maildir format use question
by Rick Romero 02 Mar '09

02 Mar '09

Hey all, I've got a couple servers using Maildir format. As I understand it from a simple perspective, 'new' contains newly delivered messages, and 'cur' contains messages that have been 'handled'. I like to keep things simple for users, so rather than have 'Spam', 'Junk' 'ToLearn' and other possibly confusing folders, what I thought I would do is scan their .Spam/cur folder for mail that was older than an hour (based on file atime(?) stamp) and feed that through SpamAssassin. The idea being that anything in 'cur' would: 1. have been moved there by the user. 2. be recently read, and I think if it were innocent, would be handled within an hour 3. Not contain newly delivered, unread mail. This is actually what I see when I view my Spam folder through Evolution. If I use a PHP webclient - either Horde or Roundcube (I've captured the debugs if you'd like them), then a simple view of the Spam folder causes the files to be moved from new/ to cur/. They are updated with the :2, - but since nothing was actually done, no flags are added. So I'm left with a quandry. I guess the simple question is, Should mail in cur, EVER not have a flag? I suppose if it were marked as UNSEEN after being SEEN, that's possible. So I just answered myself there :) Is it possible to have Dovecot NOT move a file from new/ to cur/ until a flag has been assigned to the mail? Just from a, possible, performance standpoint - it seems when accessing an INBOX from a PHP webmail system with MANY new mails, there is an unnecessary(?) mass move of these files to another folder. Thoughts? Rick

3 3

Re: [Dovecot] One Dovecot serving 2 domains - possible?
by k bah 02 Mar '09

02 Mar '09

> ----- Original Message ----- > From: "Timo Sirainen" <tss(a)iki.fi> > To: "k bah" <kbah(a)linuxmail.org> > Cc: dovecot(a)dovecot.org > Subject: Re: [Dovecot] One Dovecot serving 2 domains - possible? > Date: Fri, 27 Feb 2009 11:58:09 -0500 > > > On Feb 27, 2009, at 8:21 AM, k bah wrote: > > >> The above assert isn't from v1.1.11 and I had added some extra checks > >> there since 1.1.7. Do you have the exact assert message from v1.1.11? > > > > root@server:~/dovecot-1.1.11/src/lib# grep -n assert istream-tee.c > > 38: i_assert(tstream->istream.skip + old_used <= size); > > 85: i_assert(tee->input->v_offset <= tee- >max_read_offset); > > 119: i_assert(last_high_offset <= input->v_offset + size); > > 142: i_assert(stream->buffer == data); > > 144: i_assert(ret > 0); > > root@server:~/dovecot-1.1.11/src/lib# > > Oh. Looks like I changed the code after v1.1.11 :) > > http://hg.dovecot.org/dovecot-1.1/rev/e1cac844aa1e > > Does that fix help with your crashes? Since it's a production server and I just started working for these people, I'll try to reproduce the previous error without affecting the users e-mail (since their server is now running 1.0.15). As soon as I do that I'm going to give you a feedback for sure, if the problem persists or not. The user who reported to me the error may not have the messages that were triggering the errors, so I can't guarantee that I'll be able to reproduce the error again. Thanks for the quick response! > > > server dovecot: child 553 (auth-worker) killed with signal 11 > > This is also interesting. A crashing imap process should have no > effect on auth-worker. Can you get a gdb backtrace from that? Ok, the same as above. thanks again! > = -- Powered by Outblaze

1 0

[Dovecot] Forwarding with Dovecot
by Sawtooth500 02 Mar '09

02 Mar '09

I'm using Dovecot with Postfix as my MTA I need to set up forwarding with Dovecot. I create a .forward file in my user's home directory, and in the .forward file I put destination_email_address email(a)example.com. Well, it got delivered to the forwarded email just fine. But the sender also got an undeliverable email from the dovecot mailbox and a copy was not saved in the dovecot mailbox. I need emails forwarded, and a copy saved in the dovecot mailbox. Thanks in advance for the help! -- View this message in context: http://www.nabble.com/Forwarding-with-Dovecot-tp22244316p22244316.html Sent from the Dovecot mailing list archive at Nabble.com.

2 1

[Dovecot] Remote storage
by Daniel L. Miller 01 Mar '09

01 Mar '09

What options are available for remote storage, i.e. storage devices directly mounted on the machine running Dovecot? I've seen discussions of NFS usage - but my experiences with NFS in times past have been poor. CIFS has worked well for me for non-mail use - would this be suitable? Or is there another method I've not considered? -- Daniel

1 1

[Dovecot] Compilation Issue on Old Boxes with macro in src/master/main.c
by Kevin A. McGrail 28 Feb '09

28 Feb '09

I'm throwing an error compiling with a custom-compiled gcc 3.2.3 on one box. The configuration string is CC=/usr/local/gcc3.2.3/bin/gcc CPPFLAGS=-I/usr/local/ssl/include LDFLAGS=-L/usr/local/ssl/lib ./configure --with-ssl=openssl --with-ssldir=/usr/local/ssl/certs --with-pam --with-pop3d --sysconfdir=/etc --localstatedir=/var I've used this to compile on other older boxes with success. And I compared the command lines and they are identical. This is the error I get with src/master/main.c main.c:365:1: directives may not be used inside a macro argument main.c:364:16: unterminated argument list invoking macro "printf" main.c: In function `print_build_options': main.c:372: syntax error before string constant Changing the function to a simpler function without the ifdef's resolves the issue and dovecot compiles. I would really like to know why two boxes with the same compiler are failing on one but not the other. Perhaps there's some program or library or preprocessor or path or something out of whack. Especially since using gcc 2.96 on the same box works! However, I since this is a simple options output routine and (from my cursory read) there may be some standards issue with this technique, I've also patched the issue. http://www.peregrinehw.com/downloads/dovecot/dovecot-1.1.11-build_options_m… Thoughts? KAM

2 4

[Dovecot] allow_nets
by CJ Teets 28 Feb '09

28 Feb '09

Hello, Im using Ubuntu 8.10 with Dovecot 1.0.10. I am using passwd files, not a MySQL database. I have 2 files, a "users" file, and a "passwd" file. I have added: allow_nets=10.1.10.1 to the end of a specific users entry in the users file. When that user tries to login, I get the following in the logs: dovecot: 2009-02-28 09:06:59 Error: IMAP(bob(a)mydomain.com): Ambiguous mail location setting, don't know what to do with it: allow_nets=10.1.10.1 (try prefixing it with mbox: or maildir:) dovecot: 2009-02-28 09:06:59 Error: IMAP(boo(a)mydomain.com): Mail storage creation failed with mail_location: allow_nets=10.1.10.1 dovecot: 2009-02-28 09:06:59 Error: child 4174 (imap) returned error 89 here is the line from my users file: bob@mydomain.com::5000:5000::/home/vmail/ mydomain.com/:/bin/false::allow_nets=10.1.10.1 here is the corresponding line from the passwd file: bob@oldschoolpunk.com:$1$evcHgrbC$BuyQRCspMzTpD8zkphxo0/ My goal is, that I want to allow this user to check email ONLY from the IP specified (i.e. 10.1.10.1) I just can't seem to get this working... Am I going about something the wrong way? Thanks!

2 2

[Dovecot] Custom flags in v1.0.15
by Pascal Mouret 28 Feb '09

28 Feb '09

Hello all, I'm having problems with setting custom flags on a dovecot imap setup, with mbox mail store. I was running v1.0rc15 on a Debian Etch box, upgraded recently to v1.0.15, but nothing changed. The problem : I read my mail using IMAP. In Thunderbird (various versions, current one being v2.0.0.19), I can set various message flags (Important, Personal, Work, ... mapped to IMAP as $Label4,$ $Label3, $Label2, ...). I read my mail from several machines, but all changes made on the message flags from one machine won't appear on the others !? Still I've read that those flags are supported in Dovecot. Actually, I logged the IMAP traffic, and saw that Dovecot claims to "handle" them. For instance, I added a flag to a message : Thunderbird > 621 uid store 35150 +FLAGS ($label4) Dovecot > * 6716 FETCH (UID 35150 FLAGS (\Seen \Recent $Label4)) Now, if I close TB, so that changes are written to the mbox file, and if I open that file on a the server with any text editor, the 'X-Keywords' line doesn't appear !? And as a matter of a fact, if I read my mail from any other machine, the flag isn't set ! Anyone knows where the problem can be ? Do I need to upgrade to v1.1 ? Or are custom flags actually supported in v1.0 (which I believe is the case) ? I browsed through the internet and searched the archives of this mailing list but didn't find any clue ... Any help would be much appreciated Thank you very much in advance Pascal Mouret -- Pascal Mouret Responsable du Service Informatique Polytech' Marseille, Université de Provence 60, rue Joliot-Curie / 13453 Marseille cedex 13 Mel : pascal.mouret(a)polytech.univ-mrs.fr Tel : 04 91 11 38 04 / Fax : 04 91 11 38 54

2 6

[Dovecot] Dovecot + Postfix Mail Forwarding Question
by Taras Hryniw 28 Feb '09

28 Feb '09

I have dovecot and postfix set up on debian lenny. Squirrelmail is used to access the mail. I put a .forward file in my user's home directory, and that sure gets the job done of forwarding email, but I need a copy saved on the local machine as well. How do I do that?

2 1

Re: [Dovecot] One Dovecot serving 2 domains - possible?
by k bah 27 Feb '09

27 Feb '09

> ----- Original Message ----- > From: "Timo Sirainen" <tss(a)iki.fi> > To: "k bah" <kbah(a)linuxmail.org> > Cc: dovecot(a)dovecot.org > Subject: Re: [Dovecot] One Dovecot serving 2 domains - possible? > Date: Thu, 26 Feb 2009 15:14:32 -0500 > > > On Wed, 2009-02-25 at 13:54 -0300, k bah wrote: > > > > I'm talking about Dovecot 1.0.x, since 1.1.x showed some > > problems > > on some of my servers. > > > > What problems? > > > > This: > > > > Feb 16 10:05:56 server dovecot: Panic: IMAP(user): file > > istream-tee.c: line 144 (i_stream_tee_read): assertion failed: > > (ret > 0) > > > > auth-worker died. > > That happened with Dovecot 1.1.4, 1.1.7 and 1.1.11, 1.1.7 was > > not with me, was with another user I found, on some mailing list. > > The problem occurred when copying or deleting messages, sometimes > > even viewing (Webmail). Since it's a production server, I > > compiled the latest 1.0.x and I'm using it. This particular > > server was running Ubuntu 8.04 (the default package is 1.0.x) and > > I upgraded to 8.10 (the default package is 1.1.x). > > The above assert isn't from v1.1.11 and I had added some extra checks > there since 1.1.7. Do you have the exact assert message from v1.1.11? root@server:~/dovecot-1.1.11/src/lib# grep -n assert istream-tee.c 38: i_assert(tstream->istream.skip + old_used <= size); 85: i_assert(tee->input->v_offset <= tee->max_read_offset); 119: i_assert(last_high_offset <= input->v_offset + size); 142: i_assert(stream->buffer == data); 144: i_assert(ret > 0); root@server:~/dovecot-1.1.11/src/lib# The full log message: --- server dovecot: Panic: IMAP(john): file istream-tee.c: line 144 (i_stream_tee_read): assertion failed: (ret > 0) server dovecot: IMAP(john): Raw backtrace: imap [0x7f3a6ae67eb2] -> imap [0x7f3a6ae67f37] -> imap [0x7f3a6ae675e8] -> imap [0x7f3a6ae6e4ca] -> imap(i_stream_read+0x27) [0x7f3a6ae6c1f7] -> imap(i_stream_read_data+0x46) [0x7f3a6ae6c2d6] -> imap [0x7f3a6ae6050e] -> imap [0x7f3a6ae60a5e] -> imap(message_parser_parse_next_block+0x29) [0x7f3a6ae60669] -> imap(index_mail_cache_parse_continue+0x1f) [0x7f3a6ae2a7ef] -> imap(maildir_save_continue+0x55) [0x7f3a6ae0f6c5] -> imap(mail_storage_copy+0xe7) [0x7f3a6ae35327] -> imap(maildir_copy+0x75) [0x7f3a6ae0c035] -> /usr/lib/dovecot/modules/imap/lib10_quota_plugin.so [0x7f3a6a43a463] -> imap(cmd_copy+0x200) [0x7f3a6adf1c60] -> imap [0x7f3a6adf6bdc] -> imap [0x7f3a6adf6c8d] -> imap [0x7f3a6adf72c5] -> imap(client_input+0x66) [0x7f3a6adf7796] -> imap(io_loop_handler_run+0xcb) [0x7f3a6ae6f4fb] -> imap(io_loop_run+0x18) [0x7f3a6ae6e8b8] -> imap(main+0x42d) [0x7f3a6adff6ad] -> /lib/libc.so.6(__libc_start_main+0xe6) [0x7f3a6a65c466] -> imap [0x7f3a6adf0ca9] server dovecot: child 924 (imap) killed with signal 6 server dovecot: child 553 (auth-worker) killed with signal 11 --- > > > a) Since I can make mailbox names unique with Dovecot variables > > (mailbox name is "susan~domain.org" which is different from > > susan~anotherdomain.org) when mail arrives, the mail message will be > > saved to the correct mailbox (even if I have, under the same mailbox > > root, two users with "susan" as the login, but from different > > domains). > > Why do you use ~ instead of @? Dovecot makes things easier if you use @. > But you can convert ~ to @ automatically: > > auth_username_translation = ~@ "username~domain.org" is the the format I chose for the uid field on my LDAP server. Yeah, I could forget about those variables and use this instead, thanks for the tip. > > > c) Ok, the two above give me the possibility to have all mailboxes, > > from the two domains, under the same mailbox root, users will be > > unique no matter the scenario (mail arriving, user checking mail), > > BUT, I would like to keep them separated anyways, is that possible to > > force that? > > Where in filesystem do you want them? For example you could do: > > mail_location = /var/mail/%d/%n > > to have two domain directories and the username under them. > << signature.asc >> It's so obvious I feel kinda dumb =). It must be the stress that kept me from seeing it before! Thanks for your time! > = Free Trial - ETF Trading Service Professional management of exchange traded fund (ETF) portfolio with buy/sell recommendations on semis SMH, bonds, ETF TLT, gold, SPY, QQQQ, DIA, OIH, autotrading available at major brokers. http://a8-asy.a8ww.net/a8-ads/adftrclick?redirectid=3d70d4ea0e9cbc38748457a… -- Powered by Outblaze

2 1

Re: [Dovecot] One Dovecot serving 2 domains - possible?
by k bah 27 Feb '09

27 Feb '09

> Subject: Re: [Dovecot] One Dovecot serving 2 domains - possible? > Date: Sat, 21 Feb 2009 17:12:49 -0500 > > > On Sat, 2009-02-21 at 18:05 -0300, k bah wrote: > > I'm talking about Dovecot 1.0.x, since 1.1.x showed some problems > > on some of my servers. > > What problems? This: Feb 16 10:05:56 server dovecot: Panic: IMAP(user): file istream-tee.c: line 144 (i_stream_tee_read): assertion failed: (ret > 0) auth-worker died. That happened with Dovecot 1.1.4, 1.1.7 and 1.1.11, 1.1.7 was not with me, was with another user I found, on some mailing list. The problem occurred when copying or deleting messages, sometimes even viewing (Webmail). Since it's a production server, I compiled the latest 1.0.x and I'm using it. This particular server was running Ubuntu 8.04 (the default package is 1.0.x) and I upgraded to 8.10 (the default package is 1.1.x). > > > Is it possible to have Dovecot on one machine serving two different domains? > > Set up how? Do you want to use user@domain style usernames, or do you > want Dovecot to detect the domain based on the server's IP address? One dovecot server which receives mail to two domains and does not forward the mail anywhere, it's the final destination for the two of them. I already have usernames that are unique, by using Dovecot variables I have username~domain.org as the actual username/mailbox name. I want to have two mailbox roots, this way, even knowing that mailbox names are unique (john~domain.org != john~anotherdomain.org) and when authenticating (from what you wrote down here about passdb) john(a)domain.org will not be confused with john(a)anotherdomain.org, even so, I want all mailboxes from one domain to sit on a different mailbox root. > > > Is is possible to set a LDAP config to one domain and another > > LDAP config to the other (the auth part, I wan't users to reside > > on different bases on my LDAP tree, so search bases need to be > > different) > > Yes. You can just create two passdb ldap {}s. Ok, so, I have 3 aspects to consider: a) When mail arrives b) When user logs in to check mail c) Where mailboxes are located a) Since I can make mailbox names unique with Dovecot variables (mailbox name is "susan~domain.org" which is different from susan~anotherdomain.org) when mail arrives, the mail message will be saved to the correct mailbox (even if I have, under the same mailbox root, two users with "susan" as the login, but from different domains). b) Since you said, on Dovecot 1.0.x, I can have two passdb ldap{}'s, when the user logs in, he/she will be redirect to the right mailbox, not the "other susan". c) Ok, the two above give me the possibility to have all mailboxes, from the two domains, under the same mailbox root, users will be unique no matter the scenario (mail arriving, user checking mail), BUT, I would like to keep them separated anyways, is that possible to force that? > thanks! = Miata Convertible Tops Buy manufacturer direct from gahh, leader in high-quality convertible tops using original materials and attachments. Custom orders and fast shipping. http://a8-asy.a8ww.net/a8-ads/adftrclick?redirectid=bd9e06c830a2118cf5fc114… -- Powered by Outblaze

4 9