- dovecot - dovecot.org

[Dovecot] chroot and raw logging
by Michal Soltys 29 Mar '07

29 Mar '07

I'm not sure if it's even intended to work in this particular case, but there's a problem when chroot is explicitely defined and rawlogging is used. Rawlog respects chroot point, without being actually chrooted. Consider configurtion as below, with two cases (dovecot.rawlog dir is of course created earlier, with appropriate uid/gid). 1) dovecot.userdb: test::10000:10000::/home/vmail/test.tld/test/./::userdb_mail=maildir:~/Maildir: ktrace will show: 18206 rawlog CALL sigprocmask(0x3,0) 18206 rawlog RET sigprocmask -65793/0xfffefeff 18206 rawlog CALL lstat(0x81fbe028,0xcfbcc980) 18206 rawlog NAMI "/dovecot.rawlog" 18206 rawlog RET lstat -1 errno 2 No such file or directory 18206 rawlog CALL sigprocmask(0x1,0xffffffff) 2) dovecot.userdb: test::10000:10000::/home/vmail/test.tld/./test::userdb_mail=maildir:~/Maildir: 1116 rawlog CALL lstat(0x85768028,0xcfbc1d20) 1116 rawlog NAMI "test/dovecot.rawlog" 1116 rawlog RET lstat -1 errno 2 No such file or directory 1116 rawlog CALL sigprocmask(0x1,0xffffffff) 1116 rawlog RET sigprocmask 0 I also noticed something else (not rawlog related). If I do a silly (blame my curiosity ;) thing like: valid_chroot_dirs: / and set chroot point as /./home/vmail/test.tld/test/ in passwd-file Dovecot will try to stat home/vmail/test.tld/test/ (and fail w/o beginning /), then chdir to /tmp, start pop3 or imap process, and recreate home/vmail/test.tld/test under /tmp. 17027 dovecot CALL chdir(0x87a4b29c) 17027 dovecot NAMI "home/vmail/test.tld/test/" 17027 dovecot RET chdir -1 errno 2 No such file or directory 17027 dovecot CALL setitimer(0,0xcfbe7020,0xcfbe7010) 17027 dovecot RET setitimer 0 17027 dovecot CALL seteuid(0) 17027 dovecot RET seteuid 0 17027 dovecot CALL chdir(0x3c001b72) 17027 dovecot NAMI "/tmp" 17027 dovecot RET chdir 0 ... 17027 dovecot CALL sigprocmask(0x3,0) 17027 dovecot RET sigprocmask -65793/0xfffefeff 17027 dovecot CALL execve(0x87a4bc38,0x87a4bc70,0x84fdb900) 17027 dovecot NAMI "/usr/local/libexec/dovecot/pop3" ... 17027 pop3 CALL mkdir(0x85f5a2b0,0x1ff) 17027 pop3 NAMI "home/vmail/test.tld/test//Maildir" 17027 pop3 RET mkdir -1 errno 2 No such file or directory 17027 pop3 CALL mkdir(0x85f5a2e0,0x1ff) 17027 pop3 NAMI "home/vmail/test.tld/test/" 17027 pop3 RET mkdir -1 errno 2 No such file or directory 17027 pop3 CALL mkdir(0x85f5a328,0x1ff) 17027 pop3 NAMI "home/vmail/test.tld/test" 17027 pop3 RET mkdir -1 errno 2 No such file or directory 17027 pop3 CALL mkdir(0x85f5a348,0x1ff) ... and so on, then it creates all the home/vmail/... dirs Configuration: openbsd 3.9, i386, dovecot 1.0-rc28 dovecot.userdb: test::10000:10000::/home/vmail/test.tld/test/./::userdb_mail=maildir:~/Maildir: dovecot.passdb: test:{PLAIN}test: base_dir: /var/dovecot/ protocols: imap imaps pop3 pop3s ssl_listen: * ssl_ca_file: /etc/ssl/cert_bundle.pem ssl_cert_file: /etc/ssl/ca_ppgk/certs/fetch_crt.pem ssl_key_file: /etc/ssl/ca_ppgk/private/fetch_key.pem verbose_ssl: yes login_dir: /var/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login login_greeting: Dovecot IMAP server ready. login_greeting_capability(default): yes login_greeting_capability(imap): yes login_greeting_capability(pop3): no valid_chroot_dirs: /var/mail:/home/regular:/home/vmail verbose_proctitle: yes first_valid_uid: 1999 first_valid_gid: 10 mail_location: mbox:~/Mail:INBOX=/var/mail/%u mail_debug: yes fsync_disable: yes lock_method: fcntl maildir_copy_with_hardlinks: yes mbox_read_locks: fcntl mbox_write_locks: fcntl mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 imap_client_workarounds(default): outlook-idle delay-newmail imap_client_workarounds(imap): outlook-idle delay-newmail imap_client_workarounds(pop3): outlook-idle pop3_uidl_format(default): pop3_uidl_format(imap): pop3_uidl_format(pop3): %08Xu%08Xv pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh auth default: mechanisms: plain login verbose: yes debug: yes passdb: driver: passwd-file args: /etc/dovecot.passdb passdb: driver: bsdauth userdb: driver: passwd-file args: /etc/dovecot.userdb userdb: driver: passwd socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master:

2 2

[Dovecot] passwd-file contents are not being used
by Randolph Kahle 29 Mar '07

29 Mar '07

I am setting up my dovecot installation and I am not getting results that I expected for the authentication phase. I expected: * PAM authentication would not be attempted * passwd-file would provide gid, uid, home, mail I notice that even thought it appears that this information is returned from auth(default) in the IMAP(randykahle) phase, it is not using that information - it used uid=502, etc. Here is my log output: ----- Mar 29 05:59:08 kahle dovecot: auth(default): pam(randykahle, 72.211.130.251): lookup service=dovecot Mar 29 05:59:08 kahle dovecot: auth(default): pam(randykahle, 72.211.130.251): pam_authenticate() failed: Authentication failure Mar 29 05:59:08 kahle dovecot: auth(default): passwd-file /etc/ dovecot/userdb: Read 1 users Mar 29 05:59:08 kahle dovecot: auth(default): passwd-file(randykahle, 72.211.130.251): lookup: user=randykahle file=/etc/dovecot/userdb Mar 29 05:59:08 kahle dovecot: auth(default): client out: OK 1 user=randykahle home=/var/mail/vhosts/com.rosalita/ randy mail=maildir:~/Maildir uid=5000 gid=5000 Mar 29 05:59:08 kahle dovecot: auth(default): master in: REQUEST 26 11935 1 Mar 29 05:59:08 kahle dovecot: auth(default): passwd(randykahle, 72.211.130.251): lookup Mar 29 05:59:08 kahle dovecot: auth(default): master out: USER 26 randykahle system_user=randykahle uid=502 gid=502 home=/ home/randykahle Mar 29 05:59:08 kahle dovecot: IMAP(randykahle): Effective uid=502, gid=502, home=/home/randykahle Mar 29 05:59:08 kahle dovecot: IMAP(randykahle): maildir: access(/ home/randykahle/Maildir, rwx): failed: No such file or directory Mar 29 05:59:08 kahle dovecot: IMAP(randykahle): maildir: couldn't find root dir Mar 29 05:59:08 kahle dovecot: IMAP(randykahle): mbox: root exists (/ home/randykahle/mail) Mar 29 05:59:08 kahle dovecot: IMAP(randykahle): mbox: INBOX exists (/ var/mail/randykahle) Mar 29 05:59:08 kahle dovecot: IMAP(randykahle): mbox: root=/home/ randykahle/mail, index=/home/randykahle/mail, inbox=/var/mail/randykahle Mar 29 05:59:08 kahle dovecot: imap-login: Login: user=<randykahle>, method=PLAIN, rip=72.211.130.251, lip=72.249.22.55 Mar 29 05:59:11 kahle dovecot: IMAP(randykahle): open(/var/ mail/.temp.kahle.org.11965.76100dca2c5b2009) failed: Permission denied Mar 29 05:59:11 kahle dovecot: IMAP(randykahle): file_lock_dotlock() failed with mbox file /var/mail/randykahle: Permission denied Mar 29 05:59:16 kahle dovecot: IMAP(randykahle): Disconnected ----- Here is my passwd-file user information line: ----- randykahle:{plain}xxxxx:5000:5000::/var/mail/vhosts/com.rosalita/ randy::home=/var/mail/vhosts/com.rosalita/randy mail=maildir:~/ Maildir uid=5000 gid=5000 ----- Any tips on how to get the information in the passwd-file used by the IMAP process would be appreciated. -- Randy

2 1

[Dovecot] dovecot mmap() complaints: No such device
by sergey ivanov 29 Mar '07

29 Mar '07

I'm trying to use dovecot-deliver with sieve plugin, delivering to Maildirs. Everything seems working O.K., but I'm getting the following lines in /var/log/maillog: --- Mar 29 00:06:00 alt64 dovecot: imap-login: Login: user=<seriv>, method=PLAIN, rip=66.80.117.2, lip=192.168.10.8, TLS Mar 29 00:06:00 alt64 dovecot: IMAP(seriv): mmap() failed with index file /home/seriv/.imap/dovecot.index: No such device ... Mar 29 00:06:19 alt64 deliver(seriv): mmap() failed with index file /home/seriv/.imap/dovecot.index: No such device Mar 29 00:06:19 alt64 deliver(seriv): msgid=<460B3B13.7010000(a)omniti.com>: saved mail to INBOX Mar 29 00:06:19 alt64 postfix/local[15166]: 6294A141C269: to=<seriv(a)alt64.menlo>, relay=local, delay=0.24, delays=0.03/0.01/0/0.2, dsn=2.0.0, status=sent (delivered to command: /usr/lib64/dovecot/deliver -d ${USER}) Mar 29 00:06:19 alt64 postfix/qmgr[20933]: 6294A141C269: removed --- I have tried to enable rawlog, but have corresponding rawlog file do not explain the problem for me: --- 3 select "INBOX" 4 UID fetch 1:* (FLAGS) 5 UID fetch 43498:43501 (UID RFC822.SIZE FLAGS BODY.PEEK[HEADER.FIELDS (From To Cc Subject Date Message-ID Priority X-Priority References Newsgroups In-Reply-To Content-Type)]) 6 UID fetch 43500 (UID RFC822.SIZE BODY.PEEK[]) 7 uid store 43500 +FLAGS (NonJunk) 8 IDLE --- Dovecot compiled from cvs branch_1_0 at March 25. --- $ sudo dovecot -n Password: # /etc/dovecot/dovecot.conf ssl_cert_file: /etc/postfix/cert.pem ssl_key_file: /etc/postfix/key.pem login_dir: /var/run/dovecot/login login_executable: /usr/lib64/dovecot/imap-login mail_extra_groups: mail mail_location: maildir:/home/%u/.imap mail_executable: /usr/lib64/dovecot/rawlog /usr/lib64/dovecot/imap auth default: passdb: driver: pam userdb: driver: passwd socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 438 --- /home mounted as zfs-fuse filesystem. I guess the problem due to fuse mounted filesystem. -- With best regards, Sergey Ivanov.

2 2

[Dovecot] can't receive mail from other hosts
by carpenter＠strongs.org 29 Mar '07

29 Mar '07

i'm running RHEL v 5 and 1.0-1.2.rc15 of dovecot and 2.3.3-2 of postfix. users can send mail to outside hosts, but can not receive them. i find no errors in the maillog -- i used a page from the redhat docs to configure postfix and dovecot so that they used the same mail directory... i think... any ideas on how to debug and/or fix this would be greatly appreciated. thanks, steve

4 3

[Dovecot] assertion failed (1.0-rc27)
by Steven F Siirila 29 Mar '07

29 Mar '07

Under Dovecot 1.0-rc27 on Solaris 10 we noticed this error today affecting one of our users repeatedly: Mar 28 14:02:01 myhost dovecot: IMAP(myuser): file mbox-sync-rewrite.c: line 423 (mbox_sync_read_and_move): assertion failed: (need_space == (uoff_t)-mails[idx].space) Mar 28 14:02:01 myhost dovecot: IMAP(myuser): Raw backtrace: 0x7ac54 -> 0x42cd4 -> 0x3e968 -> 0x3f54c -> 0x3f980 -> 0x6c834 -> 0x298a0 -> 0x2114c -> 0x212e8 -> 0x22d60 -> 0x22cd8 -> 0x22ed8 -> 0x81004 -> 0x808d8 -> 0x2b3f8 -> 0x1db5c Mar 28 14:02:01 myhost dovecot: child 24818 (imap) killed with signal 6 I have no idea what the user experienced, as we simply noticed this in the logs (which appear on our consoles, too). I hope this is enough information, as we do not run with core dumps enabled on our production servers. -- Steven F. Siirila Office: Lind Hall, Room 130B Internet Services E-mail: sfs(a)umn.edu Office of Information Technology Voice: (612) 626-0244 University of Minnesota Fax: (612) 626-7593

2 5

[Dovecot] New mail not appearing consistently in Outlook 2003
by Karl von Randow 29 Mar '07

29 Mar '07

Hi all, I have continuously experienced a new mail not appearing problem in Outlook 2003 on Windows XP. Using Dovecot 0.99.14 on Debian Sarge and now in 1.0rc26 and rc27. The problem exhibits itself as: Some new mail is randomly(?) not shown in my mailbox. More new mail does appear, so it's difficult to know when a message has been missed. If I restart Outlook the missed new messages will appear as unread in the order where they should have been received in my inbox. I use secure imap. I get email through my inbox (receipts from a website we're testing, at its peak maybe 2-3 a minute) that are moved into another mailbox using a rule in Outlook. These are often the messages that are missed as above, but it often includes other email as well. The mail box format is mbox on the server. The mail delivery is by exim4 from Debian Sarge. I wondered if there was a locking problem between exim4 and dovecot? My transport in exim4 for delivering the mail is: mail_spool_home: debug_print = "T: appendfile for $local_part@$domain" driver = appendfile file = /home/vmail/$domain/$local_part/INBOX delivery_date_add envelope_to_add return_path_add group = mail mode = 0660 mode_fail_narrower = false The problem is reproducable in that I see the problem occur everyday. I am about to compile and install rc28 to see if that improves matters. I'd appreciate any help resolving the problem! Here is my dovecot.conf: # /usr/local/etc/dovecot.conf protocols: pop3 imap imaps disable_plaintext_auth: no login_dir: /usr/local/var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login mail_extra_groups: mail mail_location: mbox:/home/vmail/%d/%n/mail/:INBOX=/home/vmail/%d/%n/INBOX mbox_dirty_syncs: no mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 imap_client_workarounds(default): outlook-idle delay-newmail imap_client_workarounds(imap): outlook-idle delay-newmail imap_client_workarounds(pop3): outlook-idle pop3_uidl_format(default): pop3_uidl_format(imap): pop3_uidl_format(pop3): %08Xu%08Xv auth default: passdb: driver: passwd-file args: /etc/vmail.passwd userdb: driver: static args: uid=1064 gid=1001 home=/home/vmail/%d/%u

5 16

[Dovecot] Bug-report for rc28: Mailbox isn't a valid mbox file
by Erik van Oosten 29 Mar '07

29 Mar '07

Hi, When I try to open the attached mbox file I get the following warning in Thunderbird 1.5.0.10: 'The current command failed. The e-mail server responded: Mailbox isn't a valid mbox file'. I also tried this with squirrelmail, with the same result. The Dovecot version is dovecot-1.0.rc28, compiled from source. The attached mbox was correctly read from, and written to in earlier versions (either rc15 or rc22, I am not sure). The initial import was done (a long time ago) by copying a file from my Thunderbird profile directory. OS: SuSE 10.0, x86 Filesystem: ext3, (no NFS) Output of dovecot -n: ------------------------------------ # /usr/local/etc/dovecot.conf disable_plaintext_auth: no login_dir: /usr/local/var/run/dovecot/login login_executable: /usr/local/libexec/dovecot/imap-login mail_location: mbox:~/mail:INBOX=/var/spool/mail/%u auth default: passdb: driver: pam userdb: driver: passwd ------------------------------------- Can I somehow recover the data in this mbox? Regards, Erik. -- Erik van Oosten http://day-to-day-stuff.blogspot.com/

2 1

[Dovecot] odd behavior with Dovecot LDA
by Steven F Siirila 29 Mar '07

29 Mar '07

Okay, to convince myself that quota handling was working okay with Dovecot 1.0-rc27 on Solaris 10, I tested sending a message to an account that was purposely over-quota. The account in question had a vacation message set up. For the first test, there was no $HOME/.imap directory at all. I received the vacation message, but the message which was supposed to be delivered locally queued in Postfix (temporary failure). For the second test, I created $HOME/.imap and $HOME/.imap/INBOX directories with the owner and group set to that of the user (just to make sure the code handled things the same). Again, I received the vacation message, but the message which was supposed to be delivered locally bounced back to me after Dovecot LDA crashed: <syst0005(a)peridot.tc.umn.edu>: Command died with status 139: "/opt/dovecot/libexec/dovecot/deliver -f "$SENDER"". Command output: Segmentation Fault It appears that Dovecot LDA assumes that if .imap/FOLDERNAME exists that the index files must also exist.. I wonder what other assumptions might cause segfaults. -- Steven F. Siirila Office: Lind Hall, Room 130B Internet Services E-mail: sfs(a)umn.edu Office of Information Technology Voice: (612) 626-0244 University of Minnesota Fax: (612) 626-7593

2 7

[Dovecot] How do I check the release #?
by Randolph Kahle 29 Mar '07

29 Mar '07

I am a dovecot newbie and I am setting up a machine that already has dovecot installed. Since bugs are being resolved rapidly, it appears that I need to know the release version of dovecot I am running. Is there a command I can issue or a file I can examine to determine the release version of my installation? -- Randy

3 2

[Dovecot] transfer files from Plesk qmail to Dovecot and Postfix
by Frank Church 29 Mar '07

29 Mar '07

I have some files I want to transfer from Plesk qmail to Postfix with virtual mailboxes, MySQL, Maildir etc. I can add the accounts to the database manually as there are only a few of them. In the case of the mail folders, is it merely a matter of copying the mail files over, or are there some adjustments to be made to the files? I have noticed the thread about the Courier to Dovecot script and I wonder whether it may have a role in this process.

1 1