- dovecot - dovecot.org

[Dovecot] POP3 - Mark messages as read
by Jose Gervasio Gomiz 10 Oct '06

10 Oct '06

Hi all. I have a little problem with Dovecot. My POP3 users can retrieve their emails without problem, but if they have "Leave mail in server" (or similar) active in their clients, their mboxes doesn't get updated marking those messages as read. If I access their mboxes locally with "mail -f username" I can see every message marked as non-read, something that never happened before when I used qpopper. I should note that when they retrieve their emails afterwards those previously received doesn't arrive again (correct behavior). My setup is: RHEL 4 Update 4 dovecot-0.99.11-4.EL4 (last version in RH Updates) mbox format, external POP3, local only IMAP (Squirrelmail) I couldn't find references to this in /etc/dovecot.conf, the FAQ or via web searching. Should I upgrade to dovecot-1.x to solve this? Even if RH doesn't support it yet? Any info would be greatly appreciated. Jose Gomiz

1 0

[Dovecot] RC8 failing...
by Timothy Meader 10 Oct '06

10 Oct '06

I just tried upgrading from RC7 to RC8 this morning, and I'm seeing an issue I've never seen before. On my first POP3 login, all is fine, but any subsequent logins seem to fail with the message: dovecot: Oct 10 11:04:31 Error: Maximum number of mail processes exceeded In the dovecot log file. I'm also oddly seeing the message: Oct 10 11:01:05 popbkup pop3-login: [ID 799321 mail.crit] Dovecot version mismatch: Master is v1.0.rc7, login is v1.0.rc8 (if you don't care, set version_ignore=yes) in the messages file on my system. Don't really understand that one, and I've done a complete shutdown of all dovecot or *-login *-auth processes prior to the "make install" for RC8. The only possible config file change I can think of that might've caused this (that was mentioned in the release notes for RC8) is the default_mail_env value, however, I believe mine is fine: mbox:~/mail:INBOX=/var/mail/%1u/%1.1u/%u This is for an actual mailbox with a two character hash for the maildrop directory. I was looking forward to giving RC8 a spin, but I've had to revert back to RC7 for now. Thanks in advance. --- Tim Meader CNE ISG Security NetCommerce Corporation Tim.Meader(a)gsfc.nasa.gov (301) 286-8013

1 0

[Dovecot] Trying to use "deliver" as a LDA
by Stéphane Legrand 10 Oct '06

10 Oct '06

Hello, I'm trying to use "deliver" as a LDA for some users. I found the page http://wiki.dovecot.org/LDA where i read that i can use the ".forward" file in the user HOME directory. However, when i try, i get the following error in the maillog file : ... deliver(...): mbox: We need root IMAP folder, but can't find it or HOME environment ...deliver(...): Failed to create storage for 'user' with mail 'mbox:/var/mail/user' where "user" is the user login. How can i fix this error ? My aim by using "deliver" as a LDA is to force a quota for the mailbox user. Is this the right thing to do to achieve this ? My configuration is the following : OS : FreeBSD 6.1 Dovecot 1.0.r7 Thank you for your help. Regards, Stephane. -- Stéphane LEGRAND Pôle Système d'Information - Développement informatique CCI du Loiret - 23 place du Martroi - 45044 ORLEANS CEDEX 1 Tél : 02 38 77 77 55 - Mél : stephane.legrand(a)loiret.cci.fr - Fax : 02 38 42 15 61

4 3

[Dovecot] Out of memory errors
by Bill Boebel 10 Oct '06

10 Oct '06

Do these errors indicate a memory leak? I see them in the logs a few times per day on each of our servers, running CVS dovecot-20060924... Oct 8 22:21:30 mail38b dovecot: auth(default): block_alloc(): Out of memory Oct 8 22:21:30 mail38b dovecot: child 6391 (auth) returned error 83 (Out of memory) Oct 9 20:05:05 mail38b dovecot: auth(default): pool_system_realloc(): Out of memory Oct 9 20:05:05 mail38b dovecot: child 655 (auth) returned error 83 (Out of memory) Bill

2 1

[Dovecot] (mail_cache_add): assertion
by Daniel Voelkel 09 Oct '06

09 Oct '06

Hi, I currently use rc2 on FreeBSD AMD64. Are there any news regarding this Bug: mail-cache-transaction.c: line 709 (mail_cache_add): assertion failed: (fixed_size == (unsigned int)-1 || fixed_size == data_size)? I read that access to an 64bit-machine could help you. Feel free to contact me. Greetings from germany, Daniel -- GMX DSL-Flatrate 0,- Euro* - Überall, wo DSL verfügbar ist! NEU: Jetzt bis zu 16.000 kBit/s! http://www.gmx.net/de/go/dsl

4 4

[Dovecot] IGNORE: RFC compliance report
by Tony Kay 09 Oct '06

09 Oct '06

I mis-read the line. -- Anthony Kay University Computing Center (541) 346-1719 GPG Fingerprint: B0DB D46A 60AF FAE7 A94A 5075 0CB4 4D88 9F4F 7F09 This isn't right. This isn't even wrong. Wolfgang Pauli

1 0

[Dovecot] RFC compliance on folder lists
by Tony Kay 09 Oct '06

09 Oct '06

If a mail folder contains quotes, the IMAP server may respond with a line like: 1 list "" "a/b/"X" Y Z" The specific example I saw had this exact form (it was in a nested folder, and one of the words was quoted). -- Anthony Kay University Computing Center (541) 346-1719 GPG Fingerprint: B0DB D46A 60AF FAE7 A94A 5075 0CB4 4D88 9F4F 7F09 Physics is like sex: sure, it may give some practical results, but that's not why we do it. - Richard Feynman

2 1

[Dovecot] fix: LDA logging
by David Lee 09 Oct '06

09 Oct '06

Timo: As discussed over the last couple of days. Please could the attached patch be applied to "deliver.c" so that it can log (syslog etc.) final delivery into the destination mailbox. This completes a hitherto missing part in logging an email's progress; it is useful (for example) to diagnose "my email wasn't delivered" problems. Thanks. -- : David Lee I.T. Service : : Senior Systems Programmer Computer Centre : : Durham University : : http://www.dur.ac.uk/t.d.lee/ South Road : : Durham DH1 3LE : : Phone: +44 191 334 2752 U.K. :

2 2

[Dovecot] dovecot, procmail and deliver
by David Lee 09 Oct '06

09 Oct '06

(Using dovecot 1.0 RC7 on Fedora Core 5) <scene set> Hitherto we have used UW-IMAP on a "farm" of Linux machines mounting NFS from a NetApp. (The UW-IMAP author doesn't like use of NFS, but with careful use of NFS mount arguments ('noac,actimeo=0' etc.) and trying to ensure that all activity for a given user takes place within one machine in the farm, we seem to have been OK.) We have also used UW-IMAP's 'tmail' (in sendmail.cf) and 'dmail' (from any user procmail recipes), so that access to the INBOX has been consistently UW-IMAP software. We are now considering doing a transparent migration to dovecot to improve performance. </scene> --- First: a general question: To complement the UW->dovecot migration of the IMAP daemon (reading the INBOX and folders), ought I to do a similar delivery-side migration from [UW] tmail/dmail to [dovecot] 'deliver'? It would feel safer this way, but maybe I worry too much... --- Second: "deliver" seems to add an unconditional "From " line at the start of each delivery. From sendmail, using the 'n' flag, "Mlocal F=...n..." that is OK. (Although I'm not convinced that "dovecot.deliver", nor its two-space separator (emphasis on "two") from the following date are ideal. Nor, come to that line's lack of "@somewhere".) But from a procmail recipe, I end up with two "From " lines. Surely this is incorrect. How can this be reduced to one? Shouldn't "deliver" ensure that there is only "From " line? --- Third: Would it be possible for "deliver" to do a "syslog" entry to confirm final delivery into the destination mailbox, please? (I could try and produce a patch, but someone else with more dovecot familiarity could probably do the job must more quickly and probably also more cleanly!) (I think that's all for the moment.) -- : David Lee I.T. Service : : Senior Systems Programmer Computer Centre : : Durham University : : http://www.dur.ac.uk/t.d.lee/ South Road : : Durham DH1 3LE : : Phone: +44 191 334 2752 U.K. :

6 9

[Dovecot] patch: mailboxcasecmp()
by Frank Cusack 09 Oct '06

09 Oct '06

Here is a patch which adds mailboxcmp() and mailboxcasecmp() functions, similar to mailbox_equals(). Names were chosen to match strcmp() and strcasecmp(). I needed this for Johaness Berg's dspam plugin. It watches a folder "SPAM" and forcing this to be uppercase is unacceptable for me. (I also had to modify the plugin to use the new routine.) It's against dovecot-1.0.beta8 but should be trivial to port to CVS. -frank

3 10