- dovecot - dovecot.org

[Dovecot] imap default folder dont appear..,
by John Von Essen 10 Jun '06

10 Jun '06

Hi, New to list. I am having some issues with dovecot and Outlook. Mail server is sendmail with procmail LDA for supporting /home/username/Maildir. I am talking to IMAP with both Outlook and SquirrelMail. SquirrelMail shows the default IMAP folders under INBOX, namely Sent, Drafts, and Trash for all users. However Outlook does not. Actually, to be more specific, some clients Outlook show the default folders but some do not. On the ones that do not, I am not sure what to do? Those accounts receive mail into the Inbox, but there is no Sent mail folder for outbound email, etc.,. Can someone point me in the right direction. I have six Outlook clients for six users, 2 show the default folders, the others do not. On the users Outlook that do not see the defaults folders, like Sent mail... If I go into SquirrelMail and send an email, I see it in SquirrelMails Sent, but not Outlook?! Thanks in advance for any help.... John

1 0

[Dovecot] Dovecot, IMAP, and mutt
by Travis Poppe 09 Jun '06

09 Jun '06

Hello, I'm running FreeBSD 6.0 release on x86 hardware and am using mutt version 1.5.11. Not running dovecot on/over NFS or anything, just the standard UFS2 filesystem. I'm also using SSL for IMAP. Since dovecot 1.0.b8, I've had to instruct mutt to do things twice (such as deleting) before the changes will actually occur. I've confirmed that this does not happen with dovecot 1.0.b7, which is what I'm using now to work around the problem. To repeat, use mutt 1.5.11 in IMAP/SSL mode with dovecot 1.0.b8 and try to mark some mail for deletion. Then, press the '$' key to enact the changes. You'll see that the piece(s) of mail will still be there after doing so. Pressing the '$' key again will cause the mail to be removed. Any ideas as to what's going on? Thanks, -- Travis Poppe IRC: tlp @ irc.freenode.net

3 2

[Dovecot] Problem with dovecot-lda
by Jef Driesen 09 Jun '06

09 Jun '06

I have installed the dovecot 1.0 beta3 (package included with Ubuntu Dapper Drake) and everything is working very well. Next I wanted to try the dovecot lda (for sieve filtering). In postfix I have "mailbox_command = /usr/lib/dovecot/deliver" and I followed the instructions from http://wiki.dovecot.org/LDA. I only changed "postmaster_address = postmaster(a)localdomain.local" and "user = dovecot" from the example configuration. With this configuration, no mail is delivered (discarded?) and in the logfile there is this error: Jun 5 18:10:08 localhost postfix/local[9630]: BFA6D5A403: to=<jef(a)localdomain.local>, relay=local, delay=0, status=bounced (local configuration error. Command output: Fatal: open(/etc/dovecot/dovecot.conf) failed: Permission denied ) Changing permissions on /etc/dovecot/dovecot.conf to 644 fixes the problem, but I think this is not the best solution. Any ideas?

2 2

[Dovecot] Problem Compiling Dovecot-LDA
by Timothy White 09 Jun '06

09 Jun '06

I'm trying to setup Dovecot-LDA. I grab dovecot beta8 and compiled it with the following options. $ ./configure --without-deliver --with-mysql $ make # make install It builds fine, and I have it running fine now. I then tried to build dovecot-lda from cvs, with the following. $ ./configure --with-dovecot=../dovecot-1.0.beta8/ $ make and it then fails with the following gcc -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -o sievec sievec.o libsieve.a /home/tim/src/dovecot-1.0.beta8/src/lib/liblib.a libsieve.a(script.o)(.text+0xa23): In function `sieve_script_load': /home/tim/src/dovecot-lda/src/libsieve/script.c:435: undefined reference to `map_refresh' libsieve.a(script.o)(.text+0xaf0): In function `sieve_script_unload': /home/tim/src/dovecot-lda/src/libsieve/script.c:462: undefined reference to `map_free' libsieve.a(sieve.o)(.text+0x1e6e): In function `verify_flag': /home/tim/src/dovecot-lda/src/libsieve/sieve.y:951: undefined reference to `imparse_isatom' collect2: ld returned 1 exit status make[2]: *** [sievec] Error 1 make[2]: Leaving directory `/home/tim/src/dovecot-lda/src/libsieve' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/tim/src/dovecot-lda/src' make: *** [all-recursive] Error 1 Any ideas as to what is wrong? Grepping the src files for map_refresh, map_free, and imparse_isatom only show references in dovecot-lda, in src/imparse.c and src/map.c. It seems to be a problem with src/libsieve when trying to build the sieve stuff. But I'm not sure. Thanks Tim -- Linux Counter user #273956

3 3

[Dovecot] Dovecot Authentication through LDAP Server
by ashok cvs 09 Jun '06

09 Jun '06

I have a Samba PDC with LDAP (samba version 3.0.21c with Openldap 2.3.19). where i have all the users. I have configured sendmail on another system with dovecot as IMAP and POP3 server. I wanted to enable user authentication from LDAP server which is on samba PDC. So configured /etc/dovecot.conf ################################################################ protocols = pop3 imap imap_listen = [::] pop3_listen = [::] login_dir = /var/run/dovecot-login login = imap login_user = testuser login = pop3 verbose_proctitle = yes maildir_copy_with_hardlinks = yes mbox_locks = fcntl auth = default auth_mechanisms = plain digest-md5 auth_userdb = ldap /etc/dovecot-ldap.conf auth_passdb = ldap /etc/dovecot-ldap.conf auth_user = dovecot auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@ ################################################################ configured /etc/dovecot-ldap.conf ####################################################################### # NOTE: We don't support "authentication binds", so you'll have to give # dovecot-auth read access to userPassword field in LDAP server. With OpenLDAP # this is done by modifying /etc/ldap/slapd.conf. There should already be # something like this: # # access to attribute=userPassword # by dn="<dovecot's dn>" read # add this # by anonymous auth # by self write # by * none # Space separated list of LDAP hosts to use. host:port is allowed too. hosts = 192.168.129.18 # Distinguished Name - the username used to login to the LDAP server dn = uid=root,ou=People,dc=msdpl,dc=com # Password for LDAP server dnpass = mobil5@b1d # LDAP protocol version to use. Likely 2 or 3. ldap_version = 3 # LDAP base base = dc=msdpl,dc=com # Dereference: never, searching, finding, always deref = never # Search scope: base, onelevel, subtree scope = subtree # User attributes in order: # Virtual user name (user@domain) # Home directory # MAIL environment # System user name (for initgroups()) # System UID # System GID #user_attrs = uid,homeDirectory,,uid,uidNumber,gidNumber user_attrs = uid,homeDirectory,,uid,, # Filter for user lookup. Some variables can be used: # %u - username # %n - user part in user@domain, same as %u if there's no domain # %d - domain part in user@domain, empty if user there's no domain user_filter = (&(objectClass=posixAccount)(uid=%u)) #ser_filter = (&(objectClass=sambaSamAccount)(uid=%u)) # Password checking attributes in order: # Virtual user name (user@domain) # Password, may optionally start with {type}, eg. {crypt} pass_attrs = uid,userPassword # Filter for password lookups #pass_filter = (&(objectClass=posixAccount)(uid=%u)) # Default password scheme. "{scheme}" before password overrides this. # Currently supported schemes include PLAIN, PLAIN-MD5, DIGEST-MD5, CRYPT #default_pass_scheme = CRYPT # You can use same UID and GID for all user accounts if you really want to. # If the UID/GID is still found from LDAP reply, it overrides these values. #user_global_uid = 100 #user_global_gid = 100 ####################################################################### The following is the error when we check using [root]#telnet mymailserverip 110 Trying 192.168.129.248 Connected to testmail.mydomain.com (192.168.129.248) Escape character is '^]`. user dcadmin pass mypass ERR-Authentication Failure The following is the log output of /var/log/maillog ######################################################################### Jun 8 13:09:16 testmail dovecot-auth: ldap(dcadmin): No password in reply Jun 8 13:10:16 testmail pop3-login: Disconnected: Inactivity [::ffff: 127.0.0.1] Jun 8 13:10:26 testmail dovecot-auth: ldap(root): No password in reply Jun 8 13:11:26 testmail pop3-login: Disconnected: Inactivity [::ffff: 127.0.0.1] Jun 8 13:11:38 testmail dovecot-auth: LDAP: ldap_result() failed: Can't contact LDAP server Jun 8 13:13:46 testmail dovecot-auth: ldap(root): No password in reply Jun 8 13:13:46 testmail imap-login: Disconnected [::ffff:127.0.0.1] Jun 8 13:14:03 testmail dovecot-auth: ldap(dcadmin): No password in reply Jun 8 13:14:03 testmail imap-login: Disconnected [::ffff:127.0.0.1] ############################################################################ Regards Niranjan

2 1

[Dovecot] Login issue
by "M. Tolga Özses" 09 Jun '06

09 Jun '06

Hi, cat /var/log/dovecot.log|grep -i jun\ 09 dovecot: Jun 09 09:35:26 Info: auth(default): client in: AUTH 1 PLAIN service=POP3 lip=192.168.1.2 rip=212.98.201.1 resp=<hidden> dovecot: Jun 09 09:35:26 Info: auth(default): client out: CONT 1 dovecot: Jun 09 09:35:26 Info: auth(default): client in: CONT<hidden> dovecot: Jun 09 09:35:26 Info: auth(default): client out: OK 1 user=kabuto dovecot: Jun 09 09:35:26 Info: auth(default): master in: REQUEST 13 12652 1 dovecot: Jun 09 09:35:26 Info: auth(default): master out: USER 13 kabuto system_user=kabuto uid=1000 gid=100 home=/home/kabuto dovecot: Jun 09 09:35:26 Info: pop3-login: Login: user=<kabuto>, method=PLAIN, rip=212.98.201.1, lip=192.168.1.2 dovecot: Jun 09 09:35:26 Info: POP3(kabuto): Disconnected: Logged out top=0/0, retr=0/0, del=0/0, size=0 Does this look right? I'm still not getting any e-mails from outside world. My latest .conf file is at http://www.kunduz.org/dovecot.conf. The last change I made was to out uncomment pop3_uidl_format as I was suggested yesterday. Regards,

2 2

[Dovecot] Error building on OpenBSD 3.9
by B.O.F.H. 08 Jun '06

08 Jun '06

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 This is for all versions from 1.0b3 - 1.0b8 All crash at the same place: Making all in auth gmake[3]: Entering directory `/src/mail/dovecot-1.0.beta8/src/auth' if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/lib - -I../../src/lib-sql -I../../src/lib-settings -I../../src/lib-ntlm - -DAUTH_MODULE_DIR=\""/usr/local/lib/dovecot/auth"\" - -DPKG_LIBEXECDIR=\""/usr/local/libexec/dovecot"\" -I@includedir@ @INCLUDE_des@ -I/usr/local/include -I/usr/include/kerberosV - -std=gnu99 -O2 -march=athlon -pipe -Wall -W -Wmissing-prototypes - -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 - -Wbad-function-cast -MT mycrypt.o -MD -MP -MF ".deps/mycrypt.Tpo" - -c -o mycrypt.o mycrypt.c; \ then mv -f ".deps/mycrypt.Tpo" ".deps/mycrypt.Po"; else rm -f ".deps/mycrypt.Tpo"; exit 1; fi gcc: cannot specify -o with -c or -S and multiple compilations gmake[3]: *** [mycrypt.o] Error 1 gmake[3]: Leaving directory `/src/mail/dovecot-1.0.beta8/src/auth' gmake[2]: *** [all-recursive] Error 1 gmake[2]: Leaving directory `/src/mail/dovecot-1.0.beta8/src' gmake[1]: *** [all-recursive] Error 1 gmake[1]: Leaving directory `/src/mail/dovecot-1.0.beta8' gmake: *** [all] Error 2 Gnu-make versus BSD make doesn't differ. Compile options were: ./configure \ - --sysconfdir=/etc/dovecot \ - --localstatedir=/var \ - --infodir=/usr/share/info \ - --mandir=/usr/share/man \ - --disable-rpath \ - --enable-ipv6 \ - --enable-asserts \ - --without-shadow \ - --without-pam \ - --without-vpopmail \ - --with-pgsql \ - --with-mysql \ - --with-ssl=openssl \ - --with-ssldir=/etc/ssl \ - --with-storages='maildir mbox' \ - --with-sql-drivers \ CFLAGS='-O2 -march=athlon -pipe' \ LDFLAGS='-L/usr/local/lib' \ CPPFLAGS='-I/usr/local/include -I/usr/include/kerberosV' What other data can I provide to help figure out what's going wrong? - -- Ed V. IBM: Into Building Money 7 June 2006 17:52:03 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (MingW32) iQIVAwUBRIdnZKfRmhqF/IZAAQrVUg//U0L4agoc5WGQ8gvj0XiEclzj+izer635 NYppYOc4AicVKq1Hp3HbcwaYcWYBY0nubkcUemSk+t8V/2qcZY2Y3rvaQo6B2aj8 rQF8Wj8BdqIzVMsX4IeVJO7XQlI7xUA/vaEOeL69dx43M/+7VE673YuaBpHYLvez UwXx/4pWujg0HbSuuX1SqFg5VntAE2XppxfukHmbK4FYfNbmWWGYKuAwAMqdr35t r+2cN8GOrk9nRBgisl2ADJW8YbDYvrj1DVcrNeo2cIeK68kqXU8knhCNxs9fXr75 pNRP811rdDLXQur66JHSlGdcJWOSNuoKUDUWLoJ5vpuQP/QlCpF2IfJ5kiK7rraJ 56q4Jbw63IHqYOiEC+yb2pGcgoh7tOOBSGTtlmzorym+0lOBS2SSKz7xd0+zfeU2 yHlRs5af13nCWG5ZV9e+gdyLuvZkd+8H9RTQyv2pbBgn9GHjq62HreDP/Drj6/DA HfHMXOtDF0tkfWbedIDD6SCeH4ptPf6FOqRd0BVdzuMk0Hi4uFeiChmkdXJYo9Vn c3176FN31fHmc7ZJm1P7MjAPdzAI/QP+vGiucMJg9bNTZVVOs5t/4aKMdG183zRT 5UZR4x+7ZA1JKZ4NgfVuaTM3khsgo9lQgw+A8QwrOOwKFGaek9By0AKxbJ06wIcg BFOZZSoKgWc= =U0oQ -----END PGP SIGNATURE-----

3 6

[Dovecot] a bug in the LDAP code
by Udo Rader 08 Jun '06

08 Jun '06

Hi, I was heaving some grave problems with dovecot's ldap client that left me with the following settings for virtual users: -------CUT------- mbox: data=/virtual/oeush.at/home/f.someone/mail/:INBOX=/var/mail/f.someone.oeush.at -------CUT------- data in that case was correct, yet the INBOX location was wrong, this should have been /virtual/oeush.at/var/mail/f.someone.oeush.at instead. My settings for the retrieval of the mail environment in /etc/dovecot/dovecot-ldap.conf were like this: -------CUT------- user_attrs = homeDirectory=home,uidNumber=uid,gidNumber=gid,MailMessageStore=mail -------CUT------- now at first glance this seems correct, but the problem was the upper cased "MailMessageStore" attribute name. changing it to "mailMessageStore" gave me the correct settings: -------CUT------- mbox: data=/virtual/oeush.at/home/f.someone/mail/:INBOX=/virtual/oeush.at/var/mail/f.someone.oeush.at -------CUT------- I don't have any of the LDAP RFCs ready, but I think that per default the case of the attribute _names_ should not matter when querying an ldap server. Udo Rader -- B e s t S o l u t i o n . a t EDV Systemhaus GmbH ------------------------------------------------------------------------ udo rader technischer leiter/CTO mobile ++43 660 5263642 ------------------------------------------------------------------------ eduard-bodem-gasse 8/3 A-6020 innsbruck fax ++43 512 935833 http://www.bestsolution.at phone ++43 512 935834

2 1

[Dovecot] Login issue
by "M. Tolga Özses" 08 Jun '06

08 Jun '06

Hi, I have a login issue. I do everything I can think of, but can't login. My .conf file is at http://kabuto.kunduz.org/dovecot.conf and I make slight changes everytime I try a new thing. I last set disable_plaintext_auth to yes and when I try to login using Thunderbird, I get *Code:* Sending of username did not succeed. Mail server mail.somedomain.org responded: Plaintext authentication disabled. , and dovecot.log reads *Code:* Info: pop3-login: Login failed: Plaintext authentication disabled: method=PLAIN, rip=212.98.201.1, lip=192.168.1.2. When I set disable_plaintext_auth to no and try again, I get *Code:* Sending of password did not succeed. Mail server mail.somedomain.org responded: Authentication failed and dovecot.log reads *Code:* dovecot: Jun 07 16:05:45 Info: auth(default): client in: AUTH 1 PLAIN service=POP3 lip=192.168.1.2 rip=212.98.201.1 resp=<hidden> dovecot: Jun 07 16:05:45 Info: auth(default): client out: CONT 1 dovecot: Jun 07 16:05:45 Info: auth(default): client in: CONT<hidden> dovecot: Jun 07 16:05:45 Info: auth(default): pam(kabuto,212.98.201.1): pam_authenticate() failed: Authentication failure dovecot: Jun 07 16:05:46 Info: auth(default): client out: FAIL 1 user=kabuto dovecot: Jun 07 16:05:47 Info: auth(default): client in: AUTH 2 PLAIN service=POP3 lip=192.168.1.2 rip=212.98.201.1 resp=<hidden> dovecot: Jun 07 16:05:47 Info: auth(default): pam(kabuto,212.98.201.1): pam_authenticate() failed: Authentication failure dovecot: Jun 07 16:05:48 Info: auth(default): client out: FAIL 2 user=kabuto dovecot: Jun 07 16:05:51 Info: pop3-login: Disconnected: user=<kabuto>, method=PLAIN, rip=212.98.201.1, lip=192.168.1.2 Can you help me with this? Sorry that it is long, but it was the only way to describe completely. Best regards,

3 3

RE: [Dovecot] Using MySQL to store email?
by Joshua Goodall 08 Jun '06

08 Jun '06

Marc Perkel scribbled: > Repeat after me - think outside the box. Did you miss the part where I said we've already tried this? Not only have we thought outside the box, but we've smashed it up and built several alternatives to see which one sucked the least. Turns out, SQL backends suck the most. Please try to keep up :) Marc Perkel also scribbled: > To do this with MySQL would be trivial. To do it without a database > isn't possible. Actually you could do that with a tiny Sieve extension. I don't think you really understand what you are even proposing. Your statement would be better phrased "to do it without an index would be slow". If you wanted to create a database server for mail, with a mail-specific query language, then that database might be called "Dovecot", and the query language might be called "IMAP". Innovation is not an excuse for lousy engineering. As usual, it turns out to be bad design practice to say "let's deploy shinytoy for feature X!" rather than say "we need capability X! What's a creative way to achieve that?". Which is why necessity is the mother of invention. /JG

1 0