- dovecot - dovecot.org

dovecot and postfix, help?
by Christy S 19 Aug '18

19 Aug '18

Hi all, First a disclaimer. I have played with linux off and on for years, but this is my first time trying to run a server completely on my own from start to finish, well it's on a vps, but still. I'm pretty techie, but a lot of this stuff is new to me, so I apologize for any *duh!* questions. That said, I've so far installed dovecot, postfix, wordpress, and related programs mostly successfully by following tutorials. I say mostly successfully, because I'm having a really hard time trying to get dovecot and postfix to behave together, and I'm about at the end of what I know how to find on google. If you're still with me and not groaning at yet another newbie asking wtf did I do wrong questions, thank you! My basic setup is running ubuntu 18 with up to date dovecot and postfix. Sasl is installed, and I'm using a custom domain with all records successfully pointing to the VPS. As I mentioned, I've been following tutorials. My goal is to have a mail server which can send and receive emails using this custom domain both from the shell and, much more often, from my primary computer using thunderbird. As there will likely only be two of us using this, I'm completely fine with the setup using mailboxes that actually have linux accounts. I'm also using maildir as the mailbox type. Furthermore, I want to make sure to use ssl on any mail connections.. Normal passwords but ssl being used. So, following one tutorial I set up postfix and dovecot, then went to test it. The result was that while on the shell, I could send email to my gmail account from the domain and receive it just fine. I could also send mail from my gmail account to the domain and receive it on the shel. I even managed to get imap to work, so I could receive domain emails in thunderbird, after playing around with tb's settings. However, if using tb I attempted to send an email using the custom domain, smtp failed to connect. I verified with my VPS provider that no, they do not block port 25, 465 or 587. I also verified that at&t, my home ISP, does not block outgoing smtp traffic, considering I am using google's for my gmail account. After hitting google again, I realized two things. One, for some reason port 25 never got opened on UFW, so I fixed that. Second, for some reason in all the stuff I did, postfix never got configured to use SSL. I found yet another tutorial, and ran through it to set up SSL with postfix. However, in doing this I had to change a path for sasl, only to find out later that doing that broke dovecot! Imap completely and utterly stopped behaving. Back to google again, and this time I found something a bit more up to date which explained how to interconnect postfix and dovecot. It goes through using mysql too, but I don't need that, so I skipped that part. Changed the sasl path back to what it should be, told dovecot and postfix to talk to each other and... Nope, still nothing. I saw a warning that I should not use different certificates for postfix and dovecot, so I told dovecot to look at the smtpd certificate that I made. Not sure if that's what's breaking this or something completely different, as I'm also brand new to the ssl certificate creation process. So, here's the current status of using thunderbird with my domain. mail sent from gmail to new domain, never comes back in thunderbird but doesn't bounce, either. Mail sent via thunderbird to gmail from domain, works, but shows up as from my gmail domain as well, which makes me think it's defaulting to the gmail account even though the domain's smtp info is set up. This could be because just before writing this message, I got the accept this certificate dialog over and over again for the domain and had to cancel out of it. One final point. I looked at /var/log/mail.log and, while at first I found an error in the path to one of the certificates, once I fixed that no error shows up. I restarted both postfix and dovecot, tried refreshing thunderbird and still no emails showed up. I see the connection in the log, but no errors. Anyone have ideas? Even maybe just point me in the right direction for what to check?

3 2

update to my first email
by Christy S 19 Aug '18

19 Aug '18

Alright so after checking logs, rebooting the vps because why not, and removing and re-adding the account in thunderbird... Now nothing is working other than sending mail from gmail to the domain. imap does not pick up the email and trying to send with the domain just plain fails, saying it can't connect to the server. Honestly, tempted to uninstall dovecot, sasl and postfix and start again, but I don't want to run into the same issues with conflicting tutorials. Does anyone know of a good source of how to do this that's fairly recent? I'll keep searching, but all of the outdated info is kind of frustrating. If anyone has replied to me I haven't gotten it yet, so I'm not ignoring anything you may have said. For now going to give this a break. I've been working on it literally all day! :) Christy

4 3

None
by Jarrad 18 Aug '18

18 Aug '18

1 0

Imap special-use with IOS 11
by Federico Bartolucci 17 Aug '18

17 Aug '18

Hello, has anyone experiened any issues with IMAP SPECIAL-USE extension with ios11? After the update to ios11 the Ios mail client seems to not recognize anymore the imap special-use, so that system folders (Sent, Trash etc..) are not authomatically recognized and set during the configuration. Regards Federico

2 1

"nologin" field set leads to internal failure
by postminion＠dicksinmyan.us 17 Aug '18

17 Aug '18

Hi, I've tried to use the "nologin" extra password-db field as specified here: https://wiki.dovecot.org/PasswordDatabase/ExtraFields/NoLogin Due to lack of exact documentation, I've tried to use `nologin`='y' for users that can't login, and setting `nologin`='n' for normal users. Apparently setting it to NULL for normal users would have been correct, as I've found out. Maybe write that on the above website. Anyway, login didn't work for a user with `nologin`='n' set. Trying to debug a normal user being unable to login, the log (mail.log) says: dovecot: imap-login: Disconnected (internal failure, 4 successful auths): user=<test(a)example.com>, method=PLAIN, rip=<ip6>, lip=<ip6>, TLS, session=<session> What I'm expecting it to say would be something like "user not allowed to login". I'm considering this a problem because of "Dovecot always logs a detailed error message if something goes wrong." as written here: https://wiki2.dovecot.org/Logging For the record, setting auth_debug=yes and mail_debug=yes gave the following line in the logs somewhere, from which I was able to figure out that NOLOGIN was the problem: dovecot: auth: Debug: client passdb out: OK#011<id>#011user=test(a)example.com#011nologin Thank you. dovecot -n output: --snip-- # 2.2.27 (c0f36b0): /etc/dovecot/dovecot.conf # Pigeonhole version 0.4.16 (fed8554) # OS: Linux 4.9.0-7-amd64 x86_64 Debian 9.5 auth_default_realm = example.com base_dir = ... listen = *,[v6] login_greeting = ... mail_home = .../%d/%n/ mail_location = maildir:~/mail/:INDEX=MEMORY mail_plugins = trees mail_temp_dir = ... namespace inbox { inbox = yes location = prefix = } passdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } protocols = imap lmtp recipient_delimiter = -+ service auth { unix_listener ... { group = postfix mode = 0660 user = postfix } } service imap-login { inet_listener imap { port = 143 } inet_listener imaps { port = 0 } service_count = 1 } service lmtp { unix_listener ... { group = postfix mode = 0600 user = postfix } user = vmail } ssl = required ssl_cert = <... ssl_cipher_list = ... ssl_dh_parameters_length = 4096 ssl_key = # hidden, use -P to show it userdb { driver = prefetch } userdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } --snap--

1 0

imap-login: Error: BUG: Authentication server sent unknown id
by Tom Sommer 17 Aug '18

17 Aug '18

I randomly get these errors on my Director Aug 17 10:52:37 imap-login: Error: BUG: Authentication server sent unknown id 98448 Aug 17 10:52:37 imap-login: Warning: Auth connection closed with 2 pending requests (max 2 secs, pid=27036, Received broken input: FAIL 98448 user=user(a)example.com) Aug 17 10:52:37 auth: Warning: auth client 27036 disconnected with 1 pending requests: EOF 2.3.2.1 -- Tom

2 1

None
by Aki Tuomi 17 Aug '18

17 Aug '18

---Aki TuomiDovecot oy

1 0

sdbox filesystem backup potential excludes
by Daniel Miller 17 Aug '18

17 Aug '18

When doing a filesystem backup of an moderate sdbox mailstore (300GB) - are there any files that can be safely excluded from the backup? Like *.log or *.backup? Or are they all "vital" for recovery? I'm already excluding the sdbox/virtual folders as it looks like they get created and updated as needed. -- Daniel

2 4

imapsieve wrong matches on APPEND cause
by Alex Cherevko 17 Aug '18

17 Aug '18

Hello, I'm experiencing some strange problem with imapsieve mailbox rules matching. I have Ubuntu Server 18.04.1 LTS with Postfix 3.3.0, Dovecot 2.2.33.2 and Rspamd 1.7.9. The problem occurs with Microsoft Outlook 2016 mail client. When moving with Outlook, APPEND event is logged instead of MOVE. However, when moving with another client, MOVE event is logged. So without APPEND event in causes in plugin section of dovecot.conf no rule is matched at all. If I add APPEND event into causes in plugin section of dovecot.conf, then for some reason imapsieve matches both rules on move from Inbox to Spam and no rules on move from Spam to Inbox. Matching both rules attempts to run both learn_spam and learn_ham. First one works and second logs error (which is correct). On attempt to move message from Spam to Inbox imapsieve not matching any rule at all and thus learning is not working. Could you please let me know how to fix this? More details. Here is what I have in my plugin section of dovecot.conf: ---------------------------------------- %< ---------------------------------------- plugin { imapsieve_mailbox1_before = file:/var/vmail/sieve/global/learn-spam.sieve imapsieve_mailbox1_causes = COPY APPEND imapsieve_mailbox1_from = Inbox imapsieve_mailbox1_name = Spam imapsieve_mailbox2_before = file:/var/vmail/sieve/global/learn-ham.sieve imapsieve_mailbox2_causes = COPY APPEND imapsieve_mailbox2_from = Spam imapsieve_mailbox2_name = Inbox sieve = file:/var/vmail/sieve/%d/%n/scripts;active=/var/vmail/sieve/%d/%n/active-scr ipt.sieve sieve_before = /var/vmail/sieve/global/spam-global.sieve sieve_global_dir = /var/vmail/sieve/global/ sieve_global_extensions = +vnd.dovecot.pipe +vnd.dovecot.environment +vnd.dovecot.debug sieve_pipe_bin_dir = /usr/bin sieve_plugins = sieve_imapsieve sieve_extprograms } ---------------------------------------- %< ---------------------------------------- I also have Trash, Drafts, Sent and Spam mailboxes defined in dovecot.conf. So when I try to move actual spam message from Inbox to Spam folder, this is what I see in dovecot.log: ---------------------------------------- %< ---------------------------------------- Debug: imapsieve: mailbox Spam: APPEND event ---------------------------------------- %< ---------------------------------------- So before I added "APPEND" into above imapsieve_mailbox1_causes and imapsieve_mailbox2_causes imapsieve was not matching rules at all. But after I added APPEND, here is what happens. In case I move message from Inbox to Spam both rules are matched and dovecot attempts to run both rules: ---------------------------------------- %< ---------------------------------------- Debug: INBOX: Mailbox opened because: SELECT Debug: Spam: Mailbox opened because: SELECT Debug: imapsieve: mailbox Spam: APPEND event Debug: sieve: Pigeonhole version 0.4.21 (92477967) initializing Debug: sieve: Sieve imapsieve plugin for Pigeonhole version 0.4.21 (92477967) loaded Debug: sieve: Sieve Extprograms plugin for Pigeonhole version 0.4.21 (92477967) loaded Debug: imapsieve: Static mailbox rule [1]: mailbox=`Spam' from=`*' causes=(APPEND) => before=`file:/var/vmail/sieve/global/learn-spam.sieve' after=(none) Debug: imapsieve: Static mailbox rule [2]: mailbox=`*' from=`Spam' causes=(APPEND) => before=`file:/var/vmail/sieve/global/learn-ham.sieve' after=(none) Debug: imapsieve: Matched static mailbox rule [2] Debug: imapsieve: Matched static mailbox rule [1] Debug: sieve: file storage: Using Sieve script path: /var/vmail/sieve/global/learn-spam.sieve Debug: sieve: file script: Opened script `learn-spam' from `/var/vmail/sieve/global/learn-spam.sieve' Debug: sieve: file storage: Using Sieve script path: /var/vmail/sieve/global/learn-ham.sieve Debug: sieve: file script: Opened script `learn-ham' from `/var/vmail/sieve/global/learn-ham.sieve' Debug: sieve: Opening script 1 of 2 from `/var/vmail/sieve/global/learn-spam.sieve' Debug: sieve: Loading script /var/vmail/sieve/global/learn-spam.sieve Debug: sieve: Script binary /var/vmail/sieve/global/learn-spam.svbin successfully loaded Debug: sieve: binary save: not saving binary /var/vmail/sieve/global/learn-spam.svbin, because it is already stored Debug: sieve: Executing script from `/var/vmail/sieve/global/learn-spam.svbin' Debug: sieve: action pipe: running program: rspamc Debug: Mailbox Spam: Opened mail UID=12 because: mail stream Debug: waiting for program `/usr/bin/rspamc' to finish after 0 msecs Debug: sieve: Opening script 2 of 2 from `/var/vmail/sieve/global/learn-ham.sieve' Debug: sieve: Loading script /var/vmail/sieve/global/learn-ham.sieve Debug: sieve: Script binary /var/vmail/sieve/global/learn-ham.svbin successfully loaded Debug: sieve: binary save: not saving binary /var/vmail/sieve/global/learn-ham.svbin, because it is already stored Debug: sieve: Executing script from `/var/vmail/sieve/global/learn-ham.svbin' Debug: Spam: Mailbox opened because: lib-lda delivery Debug: Spam: Mailbox opened because: SELECT ---------------------------------------- %< ---------------------------------------- And of course I'm getting the following in the log file: ---------------------------------------- %< ---------------------------------------- Error: sieve: learn-ham: line 2: duplicate pipe "rspamc" action not allowed (previously triggered one was here: learn-spam: line 3) Error: sieve: Execution of script /var/vmail/sieve/global/learn-ham.sieve failed ---------------------------------------- %< ---------------------------------------- In case I move message from Spam to Inbox on rule is matched at all: ---------------------------------------- %< ---------------------------------------- Debug: INBOX: Mailbox opened because: SELECT Debug: imapsieve: mailbox INBOX: APPEND event Debug: sieve: Pigeonhole version 0.4.21 (92477967) initializing Debug: sieve: Sieve imapsieve plugin for Pigeonhole version 0.4.21 (92477967) loaded Debug: sieve: Sieve Extprograms plugin for Pigeonhole version 0.4.21 (92477967) loaded Debug: imapsieve: Static mailbox rule [1]: mailbox=`Spam' from=`*' causes=(APPEND) => before=`file:/var/vmail/sieve/global/learn-spam.sieve' after=(none) Debug: imapsieve: Static mailbox rule [2]: mailbox=`*' from=`Spam' causes=(APPEND) => before=`file:/var/vmail/sieve/global/learn-ham.sieve' after=(none) Debug: INBOX: Mailbox opened because: SELECT ---------------------------------------- %< ---------------------------------------- With best regards, Alex

3 5

Re: Does domain quota work and how?
by Aki Tuomi 16 Aug '18

16 Aug '18

> On 16 August 2018 at 17:47 Kai Schaetzl <maillists(a)conactive.com> wrote: > > > Dovecot-owner(a)dovecot.org wrote on Thu, 16 Aug 2018 17:14:00 +0300: > > > Message rejected by filter rule match > > Hello, > > why was this message rejected by a filter rule ? > (Posting first time to the list, yes, I subscribed.) > > Thanks, > > Kai > > Hi! I'm sorry you got bit by this, it's the spam filter. The way to get by the spam filter is to subscribe and wait about an hour for the subscription list to be updated, then you can post to the list, as we give a high negative score for anyone subscribed. Aki Tuomi ps. Here is the symbols your mail got, if it's any use to you. DMARC_NA(0)[conactive.com] SUBJECT_ENDS_QUESTION Subject ends with a question (1) REPLYTO_EQ_TO_ADDR(5) FROM_HAS_DN(0) IP_SCORE(-0.007259)[country: DE(-0.04)] MV_CASE(0.5) MIME_GOOD(-0.1)[text/plain] R_SPF_ALLOW(-0.2)[+a] R_DKIM_NA(0) GREYLIST(0)[pass,body] RCVD_TLS_LAST(0) ARC_NA(0) ASN(0)[asn:198710, ipnet:185.82.84.0/22, country:DE] PREVIOUSLY_DELIVERED(0)[dovecot(a)dovecot.org] FROM_EQ_ENVFROM(0) TO_DN_NONE(0) RCPT_COUNT_ONE(0)[1] BAYES_HAM(-0.000001)[14.49%] TO_MATCH_ENVRCPT_ALL(0) HAS_REPLYTO(0)[dovecot(a)dovecot.org] RCVD_COUNT_TWO(0)[2]

2 1