- dovecot - dovecot.org

Re: [Dovecot] nfs flush/fsync config settings problem
by Wesley Huang 02 May '14

02 May '14

Hi Alessio, After days sorting the Heartbleed mess, I managed to set up Debian Squeeze amd64 for the test and I'm seeing the same error message: Fatal: nfs flush requires mail_fsync=always # doveconf -n | egrep 'fsync|nfs' mail_fsync = always mail_nfs_index = yes mail_nfs_storage = yes Cheers, Wesley On 14-04-03 09:24 AM, Alessio Cecchi wrote: > Hi, > > I'm using Maildir on Debian 6 64bit, try to "grep" for "fsync" on all > configuration files. > > Try also to install the same dovecot+configuration on Debian 6. > > Let me know! > Ciao > > Il 03/04/2014 15:12, Wesley Huang ha scritto: >> Hi Alessio, >> >> I have 2.2.12 installed in Debian Wheezy amd64 server. mail_fsync is >> specified and detected. Are you using mbox or maildir or dbox? We're >> using mbox and seeing the error. >> >> # dovecot --version >> 2.2.12 >> >> # dovecot -n | grep -E 'sync|nfs' >> mail_fsync = always >> mail_nfs_index = yes >> mail_nfs_storage = yes >> >> >> # egrep 'nfs|fsync' 10-mail.conf | egrep -v '#' >> mail_fsync=always >> mail_nfs_storage = yes >> mail_nfs_index = yes >> >> # uname -r >> 3.2.0-4-amd64 >> >> Cheers, >> >> Wesley >> >> On 14-04-03 04:22 AM, Alessio Cecchi wrote: >>> Il 08/01/2014 09:23, Troton_admin ha scritto: >>>> Hi, >>>> >>>> I need to place a maildir storage on a NFS filesystem, so I set up >>>> the config like this: >>>> >>>> mmap_disable = yes >>>> mail_nfs_storage = yes >>>> mail_nfs_index = yes >>>> mail_fsync = always >>>> lock_method = dotlock (also tried fcntl - local lockd is running, no >>>> success, now using dotlock, to be sure while debugging) >>>> >>>> The problem is that Dovecot (2.2.9/2.2.10 - the relevant code in >>>> mail-index.c is the same) logs a fatal error and quits the session >>>> (no daemon crash/coredump). >>> >>> Hi, >>> >>> I have a similar configuration but with dovecot 2.2.12 and NFS for me >>> works fine. Have you insert the "mail_fsync = always" in the right >>> place? Is there only one "mail_fsync" setting in your config? First >>> check this: >>> >>> root@mx:/etc/dovecot# grep mail_fsync /etc/dovecot/ -R >>> conf.d/10-mail.conf:mail_fsync = always >>> >>> root@mx:/etc/dovecot# dovecot -n | grep -E 'sync|nfs' >>> mail_fsync = always >>> mail_nfs_index = yes >>> mail_nfs_storage = yes >>> maildir_very_dirty_syncs = yes >>> >>> # 2.2.12: /etc/dovecot/dovecot.conf >>> # OS: Linux 2.6.32-5-amd64 x86_64 Debian 6.0.9 >>> >>> Let me know. >>> Ciao >> > >

3 3

[Dovecot] Assert Crash with HG 49e9d9743f6e
by Thomas Leuxner 02 May '14

02 May '14

New crash most likely related to Virtual plugin again: Apr 26 07:40:40 spectre dovecot: imap(tlx(a)leuxner.net): Panic: file mail-storage.c: line 1836 (mailbox_transaction_begin): assertion failed: (box->opened) Apr 26 07:40:40 spectre dovecot: imap(tlx(a)leuxner.net): Error: Raw backtrace: /usr/lib/dovecot/libdovecot.so.0(+0x6bc0f) [0x7fdfce48ac0f] -> /usr/lib/dovecot/libdovecot.so.0(+0x6bc6e) [0x7fdfce48ac6e] -> /usr/lib/dovecot/libdovecot.so.0(i_fatal+0) [0x7fdfce4442ce] -> /usr/lib/dovecot/libdovecot-storage.so.0(+0x82299) [0x7fdfce777299] -> /usr/lib/dovecot/modules/lib20_virtual_plugin.so(+0x9f1b) [0x7fdfccc2df1b] -> /usr/lib/dovecot/modules/lib20_virtual_plugin.so(virtual_storage_sync_init+0x564) [0x7fdfccc2eb84] -> /usr/lib/dovecot/libdovecot-storage.so.0(mailbox_sync_init+0x33) [0x7fdfce776e53] -> /usr/lib/dovecot/libdovecot-storage.so.0(mailbox_sync+0x27) [0x7fdfce776f77] -> dovecot/imap [tlx(a)leuxner.net 95.223.79.50 EXAMINE](cmd_select_full+0x173) [0x412c13] -> dovecot/imap [tlx(a)leuxner.net 95.223.79.50 EXAMINE](command_exec+0x3c) [0x41839c] -> dovecot/imap [tlx(a)leuxner.net 95.223.79.50 EXAMINE]() [0x417400] -> dovecot/imap [tlx(a)leuxner.net 95.223.79.50 EXAMINE]() [0x4174ba] -> dovecot/imap [tlx(a)leuxner.net 95.223.79.50 EXAMINE](client_handle_input+0x115) [0x417775] -> dovecot/imap [tlx(a)leuxner.net 95.223.79.50 EXAMINE](client_input+0x72) [0x417b22] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_call_io+0x4e) [0x7fdfce49b9fe] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run_internal+0xd7) [0x7fdfce49c9f7] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0x9) [0x7fdfce49ba89] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_run+0x38) [0x7fdfce49bb08] -> /usr/lib/dovecot/libdovecot.so.0(master_service_run+0x13) [0x7fdfce449673] -> dovecot/imap [tlx(a)leuxner.net 95.223.79.50 EXAMINE](main+0x298) [0x40c128] -> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xfd) [0x7fdfce0b2ead] -> dovecot/imap [tlx(a)leuxner.net 95.223.79.50 EXAMINE]() [0x40c28d] Apr 26 07:40:40 spectre dovecot: imap(tlx(a)leuxner.net): Fatal: master: service(imap): child 31334 killed with signal 6 (core not dumped) Disabling virtual prevents Dovecot from crashing.

2 2

[Dovecot] Dovecot permission denied error in logs
by Andrew Stuart 02 May '14

02 May '14

dovecot --version 2.1.7 I am getting he following errors in the logs eve though there is no 'apply' user in /etc/dovecot/users I'm not sure wat to do next to diagnose. Can anyone advise please? It says 'refer to server log for more information' but I thought this was the server log? May 1 22:40:44 ip-xx-xxx-xx-xx postfix/local[18901]: 1B17763738: to=<apply@localhost>, orig_to=<apply(a)example.org>, relay=local, delay=147501, delays=147501/0.54/0/0.06, dsn=4.3.0, status=deferred (temporary failure) May 1 22:40:44 ip-xx-xxx-xx-xx dovecot: lda(apply): Error: user apply: Initialization failed: Namespace '': mkdir(/home/vmail//apply) failed: Permission denied (euid=1001(apply) egid=1001(apply) missing +w perm: /home/vmail/, dir owned by 5000:5000 mode=0755) May 1 22:40:44 ip-xx-xxx-xx-xx dovecot: lda(apply): Error: user apply: Initialization failed: Namespace '': mkdir(/home/vmail//apply) failed: Permission denied (euid=1001(apply) egid=1001(apply) missing +w perm: /home/vmail/, dir owned by 5000:5000 mode=0755) May 1 22:40:44 ip-xx-xxx-xx-xx dovecot: lda(apply): Fatal: Invalid user settings. Refer to server log for more information. May 1 22:40:44 ip-xx-xxx-xx-xx dovecot: lda(apply): Fatal: Invalid user settings. Refer to server log for more information. May 1 22:40:44 ip-xx-xxx-xx-xx postfix/local[18926]: 9E5376357A: to=<apply@localhost>, orig_to=<apply(a)example.org>, relay=local, delay=235638, delays=235637/0.6/0/0.06, dsn=4.3.0, status=deferred (temporary failure) May 1 22:40:44 ip-xx-xxx-xx-xx postfix/local[18908]: 252106364B: to=<apply@localhost>, orig_to=<apply(a)example.org>, relay=local, delay=218930, delays=218929/0.6/0/0.06, dsn=4.3.0, status=deferred (temporary failure) May 1 22:40:44 ip-xx-xxx-xx-xx dovecot: lda(apply): Error: user apply: Initialization failed: Namespace '': mkdir(/home/vmail//apply) failed: Permission denied (euid=1001(apply) egid=1001(apply) missing +w perm: /home/vmail/, dir owned by 5000:5000 mode=0755) May 1 22:40:44 ip-xx-xxx-xx-xx dovecot: lda(apply): Fatal: Invalid user settings. Refer to server log for more information. May 1 22:40:44 ip-xx-xxx-xx-xx postfix/local[18900]: 9A94063274: to=<apply@localhost>, orig_to=<apply(a)example.org>, relay=local, delay=306900, delays=306900/0.66/0/0.03, dsn=4.3.0, status=deferred (temporary failure) May 1 22:41:23 ip-xx-xxx-xx-xx dovecot: pop3-login: Login: user=<my.name(a)example.org >, method=PLAIN, rip=101.103.174.186, lip=10.172.21.51, mpid=18952, session=<mc9XXV74CwBlZ666> May 1 22:41:24 ip-xx-xxx-xx-xx dovecot: pop3(my.name(a)example.org): Disconnected: Logged out top=0/0, retr=0/0, del=0/424, size=57179196 [/var/log] dovecot -n # 2.1.7: /etc/dovecot/dovecot.conf # OS: Linux 3.11.0-19-generic x86_64 Ubuntu 13.10 ext4 auth_mechanisms = plain login disable_plaintext_auth = no mail_location = maildir:/home/vmail/%d/%n managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded- character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { args = scheme=CRYPT username_format=%u /etc/dovecot/passdb driver = passwd-file } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } protocols = imap pop3 sieve service auth { unix_listener /var/spool/postfix/private/dovecot-auth { group = postfix mode = 0660 user = postfix } } ssl_cert = </etc/dovecot/mail.example.org.pem ssl_cipher_list = ALL:!LOW:!SSLv2:ALL:!aNULL:!ADH:!eNULL:!EXP:RC4+RSA: +HIGH:+MEDIUM ssl_key = </etc/dovecot/private/mail.example.org.key userdb { args = username_format=%u /etc/dovecot/users driver = passwd-file } protocol lda { deliver_log_format = msgid=%m: %$ mail_plugins = sieve postmaster_address = postmaster quota_full_tempfail = yes rejection_reason = Your message to <%t> was automatically rejected: %n%r } protocol imap { imap_client_workarounds = delay-newmail mail_max_userip_connections = 10 } protocol pop3 { mail_max_userip_connections = 10 pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } [/etc/dovecot]

1 0

Re: [Dovecot] LMTP error
by Reindl Harald 01 May '14

01 May '14

Am 01.05.2014 19:43, schrieb IT geek 31: > On 1 May 2014 19:41, Reindl Harald: > > that you are working with unix-accounts and the root uid 0 > is prohibited for (good) saftey reasons > > Okay, that sounds good. How do I deliver mail to the root account then, and stop this error/warning/message? As > mails are now backing up in the queue and cannot be delivered... keep your responses on the list! * set a alias on the postfix side to another mail-address * that way dovecot never see the root-address as destination * use "postsuper -d queue_id" to kill the messages from the queue ______________________________ cat /etc/aliases | grep root # Person who should get root's mail root: h.reindl(a)thelounge.net ______________________________ don't forget calling "newaliases" after changes in that file if you have implemented aliases on postfix in a different way follow the documentation

2 1

[Dovecot] LMTP error
by IT geek 31 01 May '14

01 May '14

Hi, I've recently switched to LMTP as I'm now using mdbox. However since switching, mails sent to the root account do not get delivered due to the following error: May 1 18:20:17 Server1 postfix/lmtp[13019]: CAEE91F851: to=<root(a)test.com>, relay=mail.test.com[private/dovecot-lmtp], delay=1097, delays=1096/0.45/0.43/0.46, dsn=4.3.0, status=deferred (host mail.test.com[private/dovecot-lmtp] said: 451 4.3.0 <root(a)test.com> Invalid user settings. Refer to server log for more information. (in reply to RCPT TO command)) This obviously fills up my mail queue. All other mails to all other mailboxes deliver fine. I'm obviously missing something in my config... any ideas? I'm using Dovecot 2.2.12 on NetBSD 5.2.2. Many thanks, -Mark dovecot -n # 2.2.12: /usr/pkg/etc/dovecot/dovecot.conf # OS: NetBSD 5.2.2 cobalt auth_username_format = %Ln doveadm_password = secret doveadm_port = 12345 first_valid_uid = 1010 last_valid_uid = 1020 listen = 192.168.1.1 login_greeting = test.com mail_location = mdbox:~/mdbox mail_plugins = " notify replication" namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { driver = passwd } passdb { driver = passwd } plugin { mail_replica = tcp:Server2.test.com } protocols = imap lmtp service aggregator { fifo_listener replication-notify-fifo { mode = 0666 } unix_listener replication-notify { mode = 0600 } } service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } user = root } service imap-login { inet_listener imap { port = 0 } } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0600 user = postfix } } service replicator { process_min_avail = 1 unix_listener replicator-doveadm { mode = 0777 } } ssl_cert = </etc/openssl/certs/mail.test.com.crt ssl_key = </etc/openssl/private/mail.test.com.key userdb { driver = passwd } userdb { driver = passwd } protocol lda { postmaster_address = postmaster(a)test.com }

3 7

[Dovecot] fts-lucene configuration
by Gregory Finch 01 May '14

01 May '14

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all, Is there a configuration option to set where fts-lucene stores its indexes? I know it defaults to lucene-indexes in the mail root directory. I'm looking to store it in the home directory. Thank you, Greg -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (MingW32) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQIcBAEBAgAGBQJTYmPZAAoJECD7Htp+IT9epBIQAKnR+cBtMZ8kkpvTefI/oVG6 ANu/gB/VGamrommOl0w+9/E0YwowdfqB3IqQuavR47KtPHE6X8gxyRf4p26p3dfC X13KCrdBvDQ0AArqi1RH4Blig2zFcLvC85QyBOvGKnYKg90wBKRODYdw9it8cU0P 1eJMkURCR5llIKUEnFQH1OBUr1rJ4c+tkke0fuxeikcoaS3DtW7LdPCQaJyYpUdS NmFehIG+n3jDQqx1jDJNBBQMlfSEz+svXFuHzAR/YCeQS8ETBQdQ7cC5ES5gBijy Z0f1bTRWhLOC9rcg3VzcbGm1ky+rAJeEVL1HGXluPOJjqLhjWvaDE+ola2cDHtNk IiVXtL4WdIAvSJ51kR8X3ubSWtHd+2mo93ryQqCE+AdhWh0lMNzxMB/r8LmVHMKY eMjFmu1QvC+W1Z20xUT5SZKFIIOnXzHZbzugkz2zKZEQbJw9AtdTrIwJ+CyxY+YN yREwPFJ2dGzglWtzk/lxAgRZUizAJEvmcLQ8n5ZPi4aX6SfZyYcD0t7nkAOVD3ff VsJdvYJeiPcoWLrQnemI4wAaClINw+7vLg4D+uiGLswyTtR4ccTg0wOUG6Bp8Jkv dMFRWLwJsK3dLYubLud9T2nlyMBG63hEyoDjgE8WxXXuIAYaYTTMUuGAf89fdwLN bgpfg40wgCfheu18qD9d =EDIQ -----END PGP SIGNATURE-----

1 0

[Dovecot] Problems with login_log_format (possible bug?)
by Trever L. Adams 01 May '14

01 May '14

login_log_format = %$: %s login_log_format_elements = user=<%u> method=%m rip=%r lip=%l mpid=%e %c session=<%{session}> These are the defaults, at least on a Fedora system. According to http://wiki2.dovecot.org/Variables, this should record for user@REALM when seeing the following Apr 30 18:08:40 TeaSet dovecot: auth: Debug: auth(user,...,<JhKid0v4bAAKAQG6>): username changed user -> user@REALM. If I wanted just user, user=<%u> should be changed to user=<%orig_user>. However, I only get user not user@REALME in imap-login log lines. I wouldn't mind this, but auth_username_format cannot be used in passed{} and I haven't been able to get pam_krb5 to uppercase the realm for it alone. (Everything else depends on it being lowercase.) I can make this work by just passing the user name part of username in the client, but then imap-login still doesn't have the required information for the same reason. Anyone have any suggestions? Thank you, Trever

1 0

[Dovecot] Dovecot 2.0.16 question...
by Farokh Irani 30 Apr '14

30 Apr '14

I'm running Dovecot 2.0.16 on OS X Server 10.7.5 and I've got a problem with IMAP searches. There are a couple of accounts that are unable to search using an IMAP search, but I can't seem to find anything wrong. Any pointers on what I can do? Is there a search index file that I can delete to force a rebuild, or a script or app that will do that? I tried to use update-fts-index.pl, but to no avail. Thanks! Farokh ---------------------------------------------------------------------------- MCF Software...simply dependably engineered For all your computer and networking needs including hosting solutions for every need. Phone: 845-735-0210 Cell: 914-262-1594

1 0

[Dovecot] doveadm import : Error creating new mailbox
by Administrator BCS 29 Apr '14

29 Apr '14

Hello, I'm new to dovecot. I managed to set up a system running dovecot/mysql/postfix/postfixadmin with a virtual maildir setup on Ubuntu 12.04 I can add and remove users, send and receive mail, create folders, move mail between them etc so all ok. Now trying to manually import some mbox files from the old server into dovecot. Copied a mbox file to the new system, converted it to Maildir with mb2md resulting in a directory containing the new, cur en tmp. Looks ok, old email messages are all there. When importing this folder using doveadm import it fails with the message: Error: Couldn't create mailbox maildir:/home/vmail/bezoekerscentrumsonsbeek.nl/techniek/.INBOX: Invalid mailbox name What am I doing wrong? Martin output from doveadm -D import: > ┌─(adje@BCS:pts/0)──────────────────────────────────────────────────────────────────────────────────────────────────────(~)─┐ > └─(89:10:33:%)── sudo doveadm -D import -u > techniek(a)bezoekerscentrumsonsbeek.nl > maildir:/mnt/multimedia/mailoudeserver/testmap/techniek > maildir:/home/vmail/bezoekerscentrumsonsbeek.nl/techniek/ all > doveadm(root): Debug: Loading modules from directory: > /usr/lib/dovecot/modules/doveadm > doveadm(root): Debug: Skipping module doveadm_acl_plugin, because > dlopen() failed: > /usr/lib/dovecot/modules/doveadm/lib10_doveadm_acl_plugin.so: undefined > symbol: acl_user_module (this is usually intentional, so just ignore > this message) > doveadm(root): Debug: Skipping module doveadm_expire_plugin, because > dlopen() failed: > /usr/lib/dovecot/modules/doveadm/lib10_doveadm_expire_plugin.so: > undefined symbol: expire_set_deinit (this is usually intentional, so > just ignore this message) > doveadm(root): Debug: Skipping module doveadm_quota_plugin, because > dlopen() failed: > /usr/lib/dovecot/modules/doveadm/lib10_doveadm_quota_plugin.so: > undefined symbol: quota_user_module (this is usually intentional, so > just ignore this message) > doveadm(root): Debug: Skipping module doveadm_zlib_plugin, because > dlopen() failed: > /usr/lib/dovecot/modules/doveadm/lib10_doveadm_zlib_plugin.so: undefined > symbol: i_stream_create_deflate (this is usually intentional, so just > ignore this message) > doveadm(root): Debug: Effective uid=0, gid=0, home=/home/adje > doveadm(root): Debug: maildir++: > root=/mnt/multimedia/mailoudeserver/testmap/techniek, index=, control=, > inbox=/mnt/multimedia/mailoudeserver/testmap/techniek, alt= > doveadm(techniek(a)bezoekerscentrumsonsbeek.nl): Debug: Added userdb > setting: mail=maildir:/home/vmail/bezoekerscentrumsonsbeek.nl/techniek > doveadm(techniek(a)bezoekerscentrumsonsbeek.nl): Debug: Added userdb > setting: plugin/quota=dirsize:storage=0 > doveadm(techniek(a)bezoekerscentrumsonsbeek.nl): Debug: Effective uid=150, > gid=8, home=/home/vmail/bezoekerscentrumsonsbeek.nl/techniek > doveadm(techniek(a)bezoekerscentrumsonsbeek.nl): Debug: maildir++: > root=/home/vmail/bezoekerscentrumsonsbeek.nl/techniek, index=, control=, > inbox=/home/vmail/bezoekerscentrumsonsbeek.nl/techniek, alt= > doveadm(techniek(a)bezoekerscentrumsonsbeek.nl): Debug: Namespace : > /home/vmail/bezoekerscentrumsonsbeek.nl/techniek/.maildir:/home/vmail/bezoekerscentrumsonsbeek.nl/techniek/.INBOX doesn't exist yet, using default > permissions > doveadm(techniek(a)bezoekerscentrumsonsbeek.nl): Debug: Namespace : Using > permissions from /home/vmail/bezoekerscentrumsonsbeek.nl/techniek: > mode=0700 gid=-1 > doveadm(techniek(a)bezoekerscentrumsonsbeek.nl): Debug: Namespace : > /home/vmail/bezoekerscentrumsonsbeek.nl/techniek/.maildir:/home/vmail/bezoekerscentrumsonsbeek.nl/techniek/.INBOX doesn't exist yet, using default > permissions > doveadm(techniek(a)bezoekerscentrumsonsbeek.nl): Debug: Namespace : Using > permissions from /home/vmail/bezoekerscentrumsonsbeek.nl/techniek: > mode=0700 gid=-1 > doveadm(techniek(a)bezoekerscentrumsonsbeek.nl): Error: Couldn't create > mailbox maildir:/home/vmail/bezoekerscentrumsonsbeek.nl/techniek/.INBOX: > Invalid mailbox name Output of dovecot -n > # 2.0.19: /etc/dovecot/dovecot.conf > # OS: Linux 3.11.0-20-generic x86_64 Ubuntu 12.04.4 LTS ext4 > auth_mechanisms = plain login > first_valid_uid = 150 > last_valid_uid = 150 > mail_gid = mail > mail_location = maildir:/home/vmail/%d/%n > mail_uid = vmail > passdb { > args = /etc/dovecot/dovecot-sql.conf.ext > driver = sql > } > postmaster_address = adje(a)bezoekerscentrumsonsbeek.nl > protocols = " imap pop3" > service auth { > unix_listener /var/spool/postfix/private/auth { > group = postfix > mode = 0660 > user = postfix > } > unix_listener auth-userdb { > group = mail > mode = 0600 > user = vmail > } > } > ssl_cert = </etc/ssl/certs/dovecot.pem > ssl_key = </etc/ssl/private/dovecot.pem > userdb { > args = /etc/dovecot/dovecot-sql.conf.ext > driver = sql > } -- Systeembeheer Bezoekerscentrum Sonsbeek

3 6

[Dovecot] [repost] log sasl auth
by Roberto Tagliaferri - Tosnet srl 29 Apr '14

29 Apr '14

Excuse for the previous post. Hi, i've in use dovecot for pop3, imap and for sasl authenticator (for postfix). Can i log all sasl auth in a sql db (or in a flat file, or to a pipe)? -- Roberto Tagliaferri Tosnet srl

1 0