September 2015 - dovecot

Re: Newbie why is dovecot classified diff then sendmail or courier
by David Niklas 30 Sep '15

30 Sep '15

Enlightenment succeeded! Thanks, David

1 0

userdb prefetch doesn't work with imapc (2.2.18)
by Nagy, Attila 30 Sep '15

30 Sep '15

Hi, I have the following config in dovecot 2.2.18: # doveconf -n userdb passdb userdb { driver = prefetch } passdb { args = host=127.0.0.1 port=1430 default_fields = userdb_imapc_user=%u userdb_imapc_password=%w driver = imap } I guess it should cause a single login to the backend IMAP server when issuing a LOGIN to dovecot. Yet, dovecot opens two TCP sessions. In the first, it issues a LOGIN and in the second it logs in again (LOGIN) and issues LIST "" "". At the end (after LOGIN succeeds to dovecot), only one of the two connections remain open to the backend server. Any ideas about this? Thanks,

2 1

v2.2.19 release candidate 2 released
by Timo Sirainen 30 Sep '15

30 Sep '15

http://dovecot.org/releases/2.2/rc/dovecot-2.2.19.rc2.tar.gz http://dovecot.org/releases/2.2/rc/dovecot-2.2.19.rc2.tar.gz.sig There were still a bit too many bugs in RC1, so here's RC2. Hopefully this will be stable enough to become v2.2.19 final. Please test now rather than wait for v2.2.19 final, since v2.2.20 is unlikely to arrive anytime soon (unless there are some major problems). Some fixes since RC1: - dict fixes, especially with pgsql - virtual plugin crashfixes - quota "count" backend fixes - lib-http fixes - some compiling fixes

2 1

Re: Released Pigeonhole v0.4.9.rc1 for Dovecot v2.2.19.rc1
by Jacques Distler 30 Sep '15

30 Sep '15

duplicate symbol _vnd_environment_extension in: ../../src/lib-sieve/plugins/vnd.dovecot/environment/.libs/libsieve_ext_vnd_environment.a(ext-vnd-environment.o) ../../src/lib-sieve/plugins/vnd.dovecot/environment/.libs/libsieve_ext_vnd_environment.a(ext-vnd-environment-items.o) duplicate symbol _vnd_environment_extension in: ../../src/lib-sieve/plugins/vnd.dovecot/environment/.libs/libsieve_ext_vnd_environment.a(ext-vnd-environment.o) ../../src/lib-sieve/plugins/vnd.dovecot/environment/.libs/libsieve_ext_vnd_environment.a(ext-vnd-environment-variables.o) ld: 2 duplicate symbols for architecture x86_64 clang: error: linker command failed with exit code 1 (use -v to see invocation) make[4]: *** [libdovecot-sieve.la] Error 1 make[3]: *** [all-recursive] Error 1 make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2

2 1

Re: v2.2.19 release candidate 2 released
by Jacques Distler 30 Sep '15

30 Sep '15

> Does http://hg.dovecot.org/dovecot-2.2/rev/7633bca91551 > fix the problem for you? Seems to. Thanks!

1 0

Re: v2.2.19 release candidate 2 released
by Jacques Distler 30 Sep '15

30 Sep '15

Darwin doesn't have an EDEADLOCK error code, so compilation fails on MacOSX: file-lock.c:214:16: error: use of undeclared identifier 'EDEADLOCK' if (errno == EDEADLOCK) ^ file-lock.c:262:16: error: use of undeclared identifier 'EDEADLOCK' if (errno == EDEADLOCK) ^ 2 errors generated. make[4]: *** [file-lock.lo] Error 1 make[3]: *** [all] Error 2 make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2

2 1

quota count
by Pavel Batkov 29 Sep '15

29 Sep '15

Hi Dovecot: 2.2.19.rc2 OS: CentOS Linux release 7.1.1503 (Core) FS: XFS Problem: Dovecot it does not include line breaks in the letter. Bug or feautre? Message size in fs: 1125 bytes Message: From cras(a)irccrew.org Tue Jul 23 19:39:23 2002 Received: with ECARTIS (v1.0.0; list dovecot); Tue, 23 Jul 2002 19:39:23 +0300 (EEST) Return-Path: <cras(a)irccrew.org> Delivered-To: dovecot(a)procontrol.fi Received: from shodan.irccrew.org (shodan.irccrew.org [80.83.4.2]) by danu.procontrol.fi (Postfix) with ESMTP id 434B423848 for <dovecot(a)procontrol.fi>; Tue, 23 Jul 2002 19:39:23 +0300 (EEST) Received: by shodan.irccrew.org (Postfix, from userid 6976) id 175FA4C0A0; Tue, 23 Jul 2002 19:39:23 +0300 (EEST) Date: Tue, 23 Jul 2002 19:39:23 +0300 From: Timo Sirainen <tss(a)iki.fi> To: dovecot(a)procontrol.fi Subject: [dovecot] first test mail Message-ID: <20020723193923.J22431(a)irccrew.org> Mime-Version: 1.0 Content-Disposition: inline User-Agent: Mutt/1.2.5i Content-Type: text/plain; charset=us-ascii X-archive-position: 1 X-ecartis-version: Ecartis v1.0.0 Sender: dovecot-bounce(a)procontrol.fi Errors-to: dovecot-bounce(a)procontrol.fi X-original-sender: tss(a)iki.fi Precedence: bulk X-list: dovecot X-IMAPbase: 1096038620 0000010517 X-UID: 1 Status: O lets see if it works Dovecot count dict mysql: UPDATE quota SET bytes=bytes+974,messages=messages+1 WHERE username = 'user10(a)test.test'

2 2

dovecot quota service for postfix
by Michael Peter 29 Sep '15

29 Sep '15

Hello, I am trying to use dovecot quota service for postfix in order set quota for some users. i configure postfix policy service to ask dovecot if user quota is sufficient to accept the email or not. (dovecot in this case acts only as policy server to postfix as it only ACCEPT/REJECT email according to user quota, but it is not used to deliver email , because postfix will deliver the email to user mailbox) Incase user is underquota, then the email is returned back to postfix for processing and delivering email to user mbox, incase user has no sufficient quota then dovecot will inform postfix to reject email. Please confirm if what i mentioned above is correct and that i understand correctly how dove-cot policy works with postfix. Kindly check my configuration below and advise the missing parts to add... plugin { quota_rule = *:storage=1G quota_grace = 10%% # 10% is the default quota_status_success = DUNNO quota_status_nouser = DUNNO quota_status_overquota = "552 5.2.2 Mailbox is full" ... } The above configurations is for all users which is not override by quota rules in userdb's extra fields in my password file below. Is the above configuration missing some thing ? i am using mbox format for emails storage. do you i have to add (quota= SOMETHING) before (quote_rule = *:storage=1G) and what to do add to make dovecot support mbox quota? smtpd_recipient_restrictions = check_policy_service inet:SERVER-HIDDEN-FOR-SECRUITY.com:12340 service quota-status { executable = quota-status -p postfix inet_listener { port = 12340 } client_limit = 1 } now in order to configure dovecot specific quota for user named (user1) i use passwd-file as follow user1:{plain}pass3:1002:1002::/home/user1::userdb_mail=mbox:~/mymail:INBOX=/var/mail/user1 userdb_quota_rule=*:bytes=300M All other users except users1 should have 1GB storage according to this configuration. which user1 will only have 300MB Please advise what is my configuration is missing and if i need to add any thing to run without issues. Many thanks Michael Peter

2 1

BINARY capability not working correctly?
by Jouko Nikula 29 Sep '15

29 Sep '15

Hello, I have trouble with some attachments not working on Horde and Roundcube. I made a ticket to Roundcube webmail and they tracked down it to Dovecot not responding correctly to BINARY FETCH: http://trac.roundcube.net/ticket/1490532 What is causing Dovecot to answer NIL? Is there an issue in Dovecot? If I want to disable to BINARY capability in Dovecot I need to use imap_capabilities. I found out that I could add capabilities with syntax imap_capabilities= +FOO but it seems I can't use similar syntax (imap_capabilities= -FOO) to remove capabilities? If I list all capabilities like: imap_capabilities= IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE AUTH=PLAIN SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS THREAD=ORDEREDSUBJECT MULTIAPPEND URL-PARTIAL CATENATE UNSELECT CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS SPECIAL-USE MOVE QUOTA I understood that this will result in listing all capabilities already pre-login. Is this a problem? Thanks, Jouko Nikula

3 3

mirroring one domain.tld to domain.tld.au
by voytek＠sbt.net.au 29 Sep '15

29 Sep '15

I have Postfix/Dovecot/postfixadmin/MySQL with several virtual mailbox domains one of the domains is like aname.com.au, the user also now has aname.com, and, would like to 'mirror' most of the addresses to be user(a)aname.com, THOUGH, some are to remain as user2(a)aname.com.au so, both user(a)aname.com as well as user(a)aname.com.au should be one user the users retrive emails as user(a)aname.com.au longer term... some would want to use aname.com.au. some, aname.com what's the best/proper way to do so in Dovecot ? I think I can do Postfix with postfixadmin to "Mirror addresses of one of your domains to another." but what do I do at the Dovecot end...? thanks for any pointers, suggestions or advice

3 2